8/30/12

PAR-28 Installation2013 Ford Police Interceptor Utility

• 2013 Ford Police Interceptor Utility does not come with fog lights

• Front facia is made from solid plastic

• Round area in facia needs to be cut out for fog light to mount

• Bracketry on the back side of front facia to support fog lights needs

to be purchased from Ford

PAR-28 Installation

The following parts need to be purchased from your local Ford dealer:

• (1) Driver Side Bracket – (BB5Z-15266-A)

• (1) Passenger Side Bracket – (BB5Z-15266-B)

• (6) Bracket Mounting Screws – (W706805-S902)

• (6) Mounting Nuts – (W715051-S439)

• (8) Light Mounting Screws – (N807011-S424)

• Fog Light – (PAR28)

• Explorer/Utility Bracket - (P28FX11)

PARTS

Using a 3.5” Hole Saw, Cut Out Fog Light Hole in FaciaSTEP 1

Before After

Remove Plastic Tabs from Ford Mounting Brackets(BB5Z-A & BB5Z-15266-B)STEP 2

Install Mounting Nuts into facia(W715051-S439)STEP 3

Mount PAR-28 Lighthead and P28FX11 together per Installation GuideSTEP 4

Install PAR-28 and Bracket Assembly into Ford Mounting Bracket using the Light

Mounting Screws (N807011-S424)STEP 5

Install Complete Assembly into facia using the Bracket Mounting Screws (W706805-5902)STEP 6

Finished Product