8000 Series

Options/Technical Overview

8000 Series Precision Digital Multimeter

• New Technology – Multi Processor design• No need for AutoCal – High precision

components used throughout the unit• Accuracy – 4/9ppm basic accuracy models• Extended Workload – High Current, High

Resistance Transmille Ltd 1997 - 2011

High Performance Temperature Functions

• Ability to scan between both Front and Rear panel Inputs automatically

• Built in conversion for both ITS-90 and IEC751

• Auto CJC (Cold Junction Compensation) for Thermocouple Input

• Single and Dual Probe Configuration

Advanced Math Functions

• Auto calculation of Accuracy (based on unit specification)

• Dynamic Uncertainty calculation

• Standard Deviation

• Minimum/Maximum Reading display

Dedicated Electrometer Inputs (8081)

• Screened input connections for High Resistance measurements to 1TOhm

• Low Current measurement to 0.01pA

• Selectable Electrometer voltage from 50V to 300V

Series OverviewFunction 8071 8080 8081

DC Volts 0-1000V 9ppm 4ppm 4ppm

AC Volts 0-1000V 0.045% 0.015% 0.015%

DC Current 35ppm 9ppm 9ppm

AC Current 0.08% 0.03% 0.03%

Resistance 10Ω – 10MΩ

25ppm 9.5ppm 9.5ppm

Resistance 1Ω – 1TΩ

X X ✓

Temperature (PRT and

Thermocouple)

X X ✓

Advanced Maths Functions

X X ✓

Transmille Ltd 1997 - 2011

8000 Series Options• Phase – Extend the workload of the 8000 series

multimeter by adding Phase measurement• TCLEAD – Automated CJ read back, take the guess

work out of measuring Thermocouples• Pressure – Use the 8000 series with Transmille’s

TPA pressure modules• 8500 10 Channel Low Thermal Scanner – Ideal for

Thermometry applications or ratio between multiple sources

• ProGraph Software – Simple, Easy to use logging software with full built in control for 8000 series DMM and 8500 Scanner

• Soft & Transit Cases – Custom designed soft and hard cases to protect your investment

Transmille Ltd 1997 - 2011

8000 Series Key Features• Resistance – Extended range and accuracy from

competing products, accurate & low noise high ohms measurements now possible

• User Friendly Operation – Direct access to the most commonly used functions

• Dual VFD Display – Display information relating to the measurement while never losing sight of the measurement, clear and easy to read

• MultiInterface – Units fitted with RS232, GPIB, LAN and USB as STANDARD! No matter what environment no new interfaces will need to be purchased

Transmille Ltd 1997 - 2011

• Ease of Calibration – Full access to all calibration points through the front panel, adjust a single point or an entire range without removing the case of the unit

• Terminal Indicators – Clearly identifies the correct connections

• Electrometer Functionality – Unique option for bench top multimeters

Transmille Ltd 1997 - 2011

• Automatic Calculation Of Measurement Uncertainty – Using noise/flicker, specification and imported uncertainty data the 8000 series can automatically calculate and display the measurement uncertainty

• Superior low noise performance – high performance low level measurements

• Programmable Front/Rear Terminals & Guard – simplifies automation with full control of all functions

• Ratio Functions – Ratio between front and rear terminals automatically to use as high accuracy resistance bridge

Transmille Ltd 1997 - 2011

• AC/DC Current to 30A – Perform full calibration of modern multi product calibrators without the need for current shunts

• Low Current Resistance Measurement – Suitable for temperature applications where self heating must be minimal

Transmille Ltd 1997 - 2011

• Unique measurement functions –Shunt measurement function measures both current and voltage across current shunt simultaneously

• Dynamic Filter Capability –8000 series features a dynamic filter, increasing the sample time automatically when a stable source is detected

Transmille Ltd 1997 - 2011

88xx Series• Offering a unique product, the 88xx series

provide customers with low cost Multimeter for specific tasks

• DCV only base units, with ACV, DCI, ACI and Resistance as configurable options

• Ideal for specialised applications, i.e. ATE systems, monitoring systems

Transmille Ltd 1997 - 2011