7a20 - hydralisk instructions
TRANSCRIPT
-
8/9/2019 7A20 - Hydralisk Instructions
1/36
Origami Hydralisk
-
8/9/2019 7A20 - Hydralisk Instructions
2/36
Introduction
Welcome to how to make anorigami Hydralisk. Thiscomplicated piece of foldedpaper will go great with your
collection of other StarCraftmemorabilia. Whether youare a casual or hardcoregamer, an origami Hydralisk
is a great way to pay homageto one of the greatest gamesevery made: StarCraft.
-
8/9/2019 7A20 - Hydralisk Instructions
3/36
Origami
Before we begin the origami process, we should take acouple of minutes to learn the rich history of origami.
Buddhist monks broughtpaper from China to Japanduring the 6th century. Thevery first, Japanese origami
is dated from this period.1
Basic techniques in origami havehelped advance science. The,Miura map fold is a rigid fold that
has been used to deploy large
solar panel arrays for spacesatellites. It treats a rigid material
like a piece of origami paper. 2
The crane is a very commonpiece of origami art as it is an
auspicious symbol in theJapanese culture. 1
The word origami is derivedfrom, ori meaning to fold,
and kami, meaning paper.1
-
8/9/2019 7A20 - Hydralisk Instructions
4/36
Origami PaperAlthough any paper can be used in origami folding, they all have their
advantages and disadvantages. Figure 1 details what each paper does best. Werecommend kami for the Hydralisk but regular printer paper will also suffice.
Printer
Paper
Kami Foil backed
Paper
Washi Artisan
Paper
Paper
composition
Cellulose
Fibers 3
Cellulose
Fibers 3
Thin sheet of foil
glued to Kami 3
Hemp or
bamboo fibers 3
Long fibered
paper coatedwith
methylcellulose
Primary Uses Simple foldsand simple
origami3
Wider range oforigami models.
Decorativeorigami 3
Traditionalorigami. 3
Intricate folds,such as insectlimbs.
Advantages Widelyavailable. 3
Since the paperis thinner thanprinter paper,
can be used formore complex
folds. 3
Final productlooks very
classy. Foldedfoil diffracts light
in manydirections. 3
Very tough. Canbe used to make
complex andintricate origami
arts. 3
Very strong. Canwithstand slightand complicated
folds
Disadvantages Too thick forcomplex folds
Not availableeverywhere.
Not practical forsimple origami.Not available
everywhere.
Expensive. Notavailable
everywhere.
Expensive. Notavailable
everywhere.
Figure 1. A comparison of origami Paper
-
8/9/2019 7A20 - Hydralisk Instructions
5/36
The Hydralisk
-
8/9/2019 7A20 - Hydralisk Instructions
6/36
Warnings and Cautions
Since origami is a very paper intensive activity,please be careful of paper cuts.
If you do cut yourself, immediately stop and take
care of the cut. Disinfect the affected area with rubbing alcohol
Apply a liquid bandage to the affected area to seal off thepain receptors from the air.
Be patient. Origami is not a quick activity. Taketime and make sure all your creases and foldsare accurate.
-
8/9/2019 7A20 - Hydralisk Instructions
7/36
Step 1
1) Crease the paper along themiddle in all the directions
shown in the first picture.
-
8/9/2019 7A20 - Hydralisk Instructions
8/36
Steps 2 - 3
2) Fold along a diagonal crease tocreate a triangle.
3) Fold along the middle crease ofthat triangle and make a smallertriangle.
-
8/9/2019 7A20 - Hydralisk Instructions
9/36
Steps 4 - 5
4) Push the left corner of the triangle(blue) to the right side, folding along
the creases.5) Smoothing the folds should createthe square (left), turn it over to do thesame thing again.
-
8/9/2019 7A20 - Hydralisk Instructions
10/36
Steps 6- 7
6) This time, pull the right corner(blue) to the left side, folding along
the creases.7) Smooth out the folds to create asquare. Now both sides should besquare shaped.
-
8/9/2019 7A20 - Hydralisk Instructions
11/36
Steps 8 - 9
8) Make the diagonal creases drawn(dashed), by folding and unfolding theflap created by pulling the left corner to
the center.
9) After making the diagonal creases onthe left and right, make the horizontalcrease by folding the top down so that theresulting flaps two corners meet the
edges of the diagonal creases.
-
8/9/2019 7A20 - Hydralisk Instructions
12/36
Steps 10 - 12
10) Pull the bottom corner (blue) up abovethe entire origami, folding along the
horizontal crease (dashed).11) Smooth out the folds along the creasesto make the diamond shape (green).
12) Flip over to do the same thing to theother side.
-
8/9/2019 7A20 - Hydralisk Instructions
13/36
Steps 13 - 14
13) Pull the bottom corner (blue) up abovethe entire origami, folding along thehorizontal crease (dashed).
14) Smooth out the folds along the creasesto make the diamond shape (green).
-
8/9/2019 7A20 - Hydralisk Instructions
14/36
Step 15
15) Fold in the left and right cornersto center to make 2 new flaps.
-
8/9/2019 7A20 - Hydralisk Instructions
15/36
Steps 16 - 17
16) Flip what you just did over, soyou can do the same thing to the
other side.17) Again, fold in the flaps from the
left and right to make theresultant kite-shape (left).
-
8/9/2019 7A20 - Hydralisk Instructions
16/36
Steps 18 - 19
18) Fold one of the legs to the sideto create a diagonal crease that
starts at the apex of that opening(blue).
19) Fold the flap back, revealing thecrease you have made (green).
-
8/9/2019 7A20 - Hydralisk Instructions
17/36
Step 20
20) Now along that crease you hadjust made, make a reverse fold
(turning the leg inside out).
-
8/9/2019 7A20 - Hydralisk Instructions
18/36
Step 21
21) Do the same thing to the otherleg.
Note: Making a crease first canmake reverse folds neater. They areoptional and sometimes can beimpossible.
-
8/9/2019 7A20 - Hydralisk Instructions
19/36
22) Turn the origami around so you can make the next folds
23) Fold in the corners on the side (blue) to the center, creating 2 new flaps.
24) Flip the origami to the other side and do the same thing, thinning what willbecome the hydralisks arms (green).
-
8/9/2019 7A20 - Hydralisk Instructions
20/36
25) Make a crease (dashed) by folding the leg so that it isperpendicular to the other leg.
26) Use that crease to make a reverse fold that results in the leg
pointing perpendicularly away from the rest of the model.
-
8/9/2019 7A20 - Hydralisk Instructions
21/36
Step 27a
27a) Make another reverse fold
(dashed) that will result in theremaining of the leg pointingperpendicularly (green) to the previousfolds.
-
8/9/2019 7A20 - Hydralisk Instructions
22/36
Step 27b
Optional:
27) b) Make one last reverse fold (dashed)
Note: This step will make the hydralisks tail will point away from the
ground when it will be able to stand.
-
8/9/2019 7A20 - Hydralisk Instructions
23/36
Steps 28 - 29
28) Hold the arms (green) in half along thecenter (dashed) so that all components of thearms are perpendicular to the tail (pink).
29) Bring the top corner (blue) of the leg down(arrow) so that it makes a flat surface with thetop of the arms.
Note: Laying the flat surface down on the tableshould now result in the tail pointing straight up
towards you (orange)
-
8/9/2019 7A20 - Hydralisk Instructions
24/36
Note
Note: At this point, rotating thehydralisk around should reveal a flatside that is composed of the top ofthe arms (green) and what used tobe the outer sides of the leg(orange).
-
8/9/2019 7A20 - Hydralisk Instructions
25/36
Steps 30 - 31
30) Open up the underside of what will be thehydralisks head (green).
Note: To be sure you are not opening more thanyou should, you should check that you are notrevealing any white surfaces.
31) Fold the tip of the head up at where thecreases first meet and split into more creases as
they move up from the tip (dashed).
-
8/9/2019 7A20 - Hydralisk Instructions
26/36
Step 32
32) Fold the tip (blue) down from adifferent fold, about of the way to
the tip (dashed)
Note: If you did this right, you shouldhave shortened the length of thehead by about 1 cm.
-
8/9/2019 7A20 - Hydralisk Instructions
27/36
Step 33
33) Fold down the sides (dashed) so
that the hydralisk looks like a shorterversion of what it was before step 30.
-
8/9/2019 7A20 - Hydralisk Instructions
28/36
Step 34
34) Turn the hydralisk upside downagain, and fold the tip (green) down
so it is tucked under the head.
-
8/9/2019 7A20 - Hydralisk Instructions
29/36
Step 35
35) Make reverse folds (dashed) withthe arms so they almost span out
straight away with from the body.
Note: This is one of those occasionswhere it is impossible to make acrease before making the reverse
fold..
-
8/9/2019 7A20 - Hydralisk Instructions
30/36
Step 36
36) Crease arm about half way, andmake a reverse fold that points the
arm straight back.
-
8/9/2019 7A20 - Hydralisk Instructions
31/36
37) Make another reverse fold half way along the last segment of the arm.
38) Make reverse folds in the same manner for the other arm.
-
8/9/2019 7A20 - Hydralisk Instructions
32/36
Steps 40 - 41
40) Fold the arm all the way forward(green) at an angle (dashed)
Note: The angle you chose should resultwith the last segment of the hydralisk armpointing away from its body.
41) Make any other necessary bends andfolds until the arm is positioned at the
hydralisks side as shown (pink)
-
8/9/2019 7A20 - Hydralisk Instructions
33/36
Step 42
42) Turn the hydralisk to the otherside and fold the other arm down in
the same manner.
Note: At this point, your hydraliskshould look reptilian and menacing.
-
8/9/2019 7A20 - Hydralisk Instructions
34/36
Final touches
44) Fold what used to be the tip of thehead back out.
Note: What used to be the tip of the headshould now look like a sharp tongue.
45) Make any necessary adjustments sothat your hydralisk can balance and standon its own.
-
8/9/2019 7A20 - Hydralisk Instructions
35/36
Works Cited
1. "History of origami." Wikipedia, The Free Encyclopedia. 30 Oct 2007, 23:56 UTC.Wikimedia Foundation, Inc. 7 Nov 2007.
2. "Miura map fold." Wikipedia, The Free Encyclopedia. 23 Oct 2007, 03:00 UTC.Wikimedia Foundation, Inc. 7 Nov
2007.
3. "Origami." Wikipedia, The Free Encyclopedia. 4 Nov 2007, 22:50 UTC. WikimediaFoundation, Inc. 7 Nov 2007.
-
8/9/2019 7A20 - Hydralisk Instructions
36/36
WARNING:
D t l t ti k t i ht