70491 ecs motion guard brochure - ecs corporation€¦ · step along the incline representing 1/2...
TRANSCRIPT
MOTION GUARD™ MG3
(800) 621 0759 | www.ecsparts.com HEADQUARTERS 2807 S. 25th Avenue, Broadview, IL 60155
WESTERN REGION 4301 S. Valley View Boulevard, Suite 8, Las Vegas, NV 89103
SKIRT BRUSH
MOTIONGUARD™ MG3Our Patented One-Piece Safety Brush is A17 Code Compliant
and Requires Only One Measurement!
• Survey and Order Form Combined To Fit One Page
• Fasteners Concealed, Yet Accessible
• Easy Packaging
• Order in Bulk
• Cost-Effective Shipping
• Thousands of Installs Completed
• Attractive & Highly Durable
• Most Cost-Effective Product Available
• Ability to Bend On Site
• Quick to Install
• Easy To Maintain
• Stress-Free Ordering
SAFETY BRUSHES MADE EASY!
MOTIONGUARD™ SAFETY BRUSHES
Objective:Use a tape measure to record measurement from the upper comb tip to the lower comb tip, tracing the nose of each step; bridging across each landing area and down its decline.
Recommendation:Use a ¾" or 1" wide steel tape measure. DO NOT use a cloth tape (Cloth or flexible tapes are not stiff enough to bridge across the nose of each step).
If measuring alone, loosen the comb plate and hook the tape measure across the back edge.
When using this method, the length of the upper and lower comb plates will need to be subtracted from your final measurement.
Measure the Escalator:One-Step Measurement:If your tape measure is long enough to measure between the upper and lower comb tips as described above, complete this measurement on your survey form as your Measured Escalator Length __________.
Two or Multiple Measurements:Start at the upper comb tip and work down. Measure to a step along the incline representing 1/2 or 1/3 of the way down the incline. Measure to the closest step nose, record the measurement and mark the step. Repeat the process measuring from the lower comb tip up the incline to the step nose of your marked step. Add the two measurements together. The sum is your Measured Escalator Length __________.
TOP LANDING
BOTTOM LANDING
LENGTH OF COMB PLATE
Upper Comb Tip
Lower Comb Tip
A A AA
www.escalatorparts.com 2741 S 21st Avenue Broadview, IL 60155Toll free: (800) 621-0759 Local: (708) 338-9700 Fax: (708) 338-9781
ECS Corporation
A A AA
www.escalatorparts.com 2741 S 21st Avenue Broadview, IL 60155Toll free: (800) 621-0759 Local: (708) 338-9700 Fax: (708) 338-9781
ECS Corporation
A A AA
www.escalatorparts.com 2741 S 21st Avenue Broadview, IL 60155Toll free: (800) 621-0759 Local: (708) 338-9700 Fax: (708) 338-9781
ECS Corporation
A A AA
www.escalatorparts.com 2741 S 21st Avenue Broadview, IL 60155Toll free: (800) 621-0759 Local: (708) 338-9700 Fax: (708) 338-9781
ECS Corporation
A A AA
www.escalatorparts.com 2741 S 21st Avenue Broadview, IL 60155Toll free: (800) 621-0759 Local: (708) 338-9700 Fax: (708) 338-9781
ECS Corporation
SAFETY BRUSH ORDER & SURVEY FORM Safety Brushes Made Easy!
(800) 621 0759 | www.ecsparts.comHEADQUARTERS 2807 S. 25th Avenue, Broadview, IL 60155
WESTERN REGION 4301 S. Valley View Boulevard, Suite 8, Las Vegas, NV 89103