PAGE 270 Office/Tech: 641-623-5401SATISFACTION GUARANTEED

SINCE 1939

op

tic

s &

ac

ce

sso

rie

sr

ed

do

t s

igh

ts

Parallax-free, non-magnifying red dot sight is ready at all times, with no switches or levers to fumble with. Sim-ply install the supplied battery, turn the PRO on, and forget about it – for up to 3 years! 2 MOA center-dot, with 6 daylight and 4 night vision brightness settings, enables accurate target en-

gagement under a broad variety of conditions. Includes a detach-able spacer that allows co-witnessing with the standard iron sights on AR-15/M16/M4 weapons. Or remove the spacer to install the PRO on shotguns or submachine guns. Integrated “rail-grabber” mount with knurled, oversized knob aids in quick attach/detach on Picatinny rails. Compatible with all generations of night vision de-vices; may also be used with Aimpoint 3x Magnifier and Concealed Engagement Unit. Flip-up lens caps included.SPECS: Hard-anodized aluminum, black. 51/4" (13.3cm) OAL. 3" (7.6cm) high, including spacer. 13 oz. (368.g) wt. 1x magnification. 30mm tube dia. Unlimited eye relief. 2 MOA dot. Battery life: 30,000 hrs. Waterproof to 150′ (45m) depth. One DL1/3N lithium battery, included.

AIMPOINT

PATROL RIFLE OPTIC

#100-009-902AT aimpoint patrol rifle optic, 7A425G58 � � � � � � � � � � � � � � � � � � � � � � � � $ 437.00

rugged, reliable & Versatile - always ready

after 8 hours help keep you from running out of power at the wrong time. Windage and elevation adjustments can be made quickly with a coin - no special tool needed - with a 3° (190" at 100 yards) adjustment range. Available with 3 or 8 MOA dot, with or without quick-attach/detach Picatinny mount. SPECS: Aluminum, stainless steel, and bronze, matte black finish. 1.9" (48.2mm) long x 1" (25.4mm) wide x 1" high. .9 oz. (25g) wt. Runs on one CR-1632 Lithium battery. Includes battery, protective cover, mounting screws, wrench, and instructions. FastFire III is not compatible with the AR-F3 FastFire Mount or the Picatinny Protector Mount.#118-000-054AT 3 Moa FastFire iii, Sight Only,

8A239L00 � � � � � � � � � � � � � � � � � � � � � � � � $ 239.00#118-000-052AT 3 Moa FastFire iii, w/Picatinny

Mount, 8A249I00 � � � � � � � � � � � � � � � � � 249.00#118-000-055AT 8 Moa FastFire iii, Sight Only,

8A239P00 � � � � � � � � � � � � � � � � � � � � � � � � 239.00#118-000-053AT 8 Moa FastFire iii, w/Picatinny

Mount, 8A249I00 � � � � � � � � � � � � � � � � � 249.00

ar-F3 FLattop FastFire sight - Fea-tures a Burris FastFire III 3-MOA dot optic, enclosed in a specially designed mount that allows the unit to be attached to flattop up-per receivers. Rugged aluminum mount po-sitions the optic to co-witness iron sights on AR-style rifles. Attaches easily to Picatinny rails.#118-000-067AT ar-F3 Flattop FastFire sight,

8A299Q00 � � � � � � � � � � � � � � � � � � � � � � � $ 299.00

shotgUN speedBead™ - Combines the proven Burris FastFire II red dot reflex sight with a steel mounting plate that installs easily between your shotgun’s stock and receiver to center the optic directly in line with the rib. Provides approximately 4" of eye relief. In case of battery failure, simply look through the optic and use your front bead. SPECS: Steel, aluminum, optic-grade glass, plastic spac-ers, steel setscrews. 13/4" (4.5cm) long, 1" (2.5cm) wide, 1" high. Includes snap-on cover, CR-2032 lithium battery, windage/elevation scale disc, adjustment tool and instructions.#118-000-024AT speedBead, Rem 870, 8A249Q00 � � $ 249.00#118-000-025AT speedBead, Rem 1100/11-87,

8A249C00 � � � � � � � � � � � � � � � � � � � � � � � � 249.00#118-000-022AT speedBead, Benelli SBE II,

8A249A00 � � � � � � � � � � � � � � � � � � � � � � � � 249.00#118-000-023AT speedBead, Benelli M2,

8A249J00 � � � � � � � � � � � � � � � � � � � � � � � � 249.00

FastFire scope tUBe MoUNts - Machined aluminum mount lets you attach a FastFire sight to your scope’s tube in almost any linear and radial position. Simply determine the location on the scope for mounting a FastFire, then tighten ring around the tube using the enclosed Torx wrench. FastFire sight can be installed in either direction on the mount. Does not include sight. SPECS: Aluminum, hardcoat anodized, matte black. 1¾" long, 1½" wide, 1½" high. Available for 1", 30mm, or 34mm tubes. Includes Torx wrench.

#118-000-124AT FastFire scope tube Mount, 1", 8A51G04 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 53.99

#118-000-125AT FastFire scope tube Mount, 30mm, 8A51J04 � � � � � � � � � � � � � � � � � � � � � � � � � � � 53.99

#118-000-126AT FastFire scope tube Mount, 34mm, 8A64M42 � � � � � � � � � � � � � � � � � � � � � � � � � � 67.99

FastFire ii - Provides fast, both-eyes-open sighting on handguns, rifles, and shotguns. Stainless steel and aluminum housing handles the recoil of magnum shotgun loads; installed weight under 2

oz. allows mounting on semi-auto pistol slides. Gives a panoramic field of view and unlimited eye relief for an unobstructed view of the area around the target. A high-intensity LED projects a 4 MOA red sighting dot, while a light sensor and integrated control cir-cuitry adjust the dot’s brightness. Coated lens resists scratches and scuffs and is parallax-free to 50 yards. 1.07x magnification aids in acquiring long-range targets, without compromising close-in effectiveness. Set the point-of-impact with two flush-mounted screws that provide 3° (190" at 100 yards) windage and elevation adjustments using the included scale disc and adjustment tool. Control switch on the left side resists accidental activation. Pow-ered by one 3-volt CR-2032 lithium battery, included; up to 5-year battery life when used in Battery Saver mode. Gasket bottom plate seals unit 100% against water. Available with a mount that fits MIL-STD 1913 Picatinny rails. For other installations, sight and mounts are available separately. SPECS: Sight - Steel, aluminum, optic-grade glass. 13/4" (4.5cm) long, 1" (2.5cm) wide, 1" high. Includes snap-on cover, CR-2032 lithium battery, windage/elevation scale disc and adjustment tool. Mounts - Aluminum, matte black. Mounting screws included.#118-000-020AS FastFire ii, only, 8A199M00 � � � � � � � � $ 199.00#118-000-019AS FastFire ii, w/picatinny Mount,

8A209A00 � � � � � � � � � � � � � � � � � � � � � � � � 209.00#118-000-013AS 1911 standard FastFire Mount,

8A47A99 � � � � � � � � � � � � � � � � � � � � � � � � � 47.99#118-000-014AS 1911 Novak FastFire Mount,

8A47L99 � � � � � � � � � � � � � � � � � � � � � � � � � 47.99#118-000-015AS 1911 Bo-Mar/Kimber FastFire Mount,

8A47G99 � � � � � � � � � � � � � � � � � � � � � � � � � 47.99#118-000-011AS glock FastFire Mount, 8A47J99 � � � � 47.99#118-000-012AS springfield Xd FastFire Mount,

8A47Q99 � � � � � � � � � � � � � � � � � � � � � � � � � 47.99#118-000-073AS s&W M&p FastFire Mount, 8A47G99 � � 47.99

picatiNNY protector MoUNt - Light-weight mount with raised “wings” protects your FastFire sight from damage. Mounting platform is contoured for a perfect fit and attaches with two Allen head screws. Extra-large, steel cross-bolt and clamping bar provide a tight, positive lock on Picatinny rails. SPECS: 6061 T6 aluminum, anodized, matte black finish. 2" (10cm) long, 13/8" (3.5cm) wide, 11/4" (3.2cm) high. 1.3 oz. (36.8g) wt.#118-000-016AS picatinny protector Mount,

8A69Q99 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 69.99

FastFire iii - Same depend-able red dot sight as the Fast-Fire II with enhanced features, including a tactile pushbutton power switch with three con-trollable levels of brightness, plus an automatic brightness setting. Battery access from the top lets you change the battery without removing the sight from the gun. Low battery indicator and automatic power shutoff

BURRIS

RED DOT REFLEX SIGHTSFast, precise heads-Up sighting;

Ultra-robust design handles Magnum-power recoil

ab

The Micro T-2 is a redesigned, upgraded evolution of the original T-1 that adds compatibility with all generations of night vision devices (NVD). The T-2 retains the original’s ruggedness and reliability, while add-ing a unique coating on the front lens that reflects the 2 MOA dot’s red light

at nearly 100% efficiency to give the highest possible dot clarity and brightness. This provides a remarkably clear image when used with a 3rd generation NVD and when used with an Aimpoint 3XMag magnifier. With 4 NVD-compatible brightness settings and 8 day-light settings, including one extra-bright setting, the T-2 is ideal for ’round the clock operation hunters, sport shooters, military, and law enforcement. Robust extruded aluminum housing, matte black anodized, with a mechanical control switch for added reliability. Runs on one CR-2032 lithium battery. 50,000-hour continuous-use battery life; 500,000 hours at NVD settings. The T-2 is available alone, with an integral mount for installation on any rifle, shotgun, or handgun with a Picatinny accessory rail, or with a quick-release Lrp Mount that is the correct height for co-witnessing with AR-15 factory "iron" sights.

AIMPOINT

MICRO T-2 RED DOT SIGHT

#100-016-034AT Micro t-2 sight w/Mount, 7A675I84 � � � � � � � � � � � � � � � � � � � � � � � � � $ 776.00

100-018-346AT Micro t-2 sight w/Lrp Mount, 7A809I17 � � � � � � � � � � � � � � � � � � � � � � � � � 874.00

#100-018-550AT Micro t-2 sight only, No Mount, 7A695K83 � � � � � � � � � � � � � � � � � � � � � � � � 751.00

enhanced, Night Vision compatible edition of this popular red dot

Item

optics & accessories iNdeXRed Dot Sights . . . . . . . . . . . . . . . . . .270-275 Scope Accessories . . . . . . . . . . . . . . .275-276

Designed using feedback from Aimpoint customers who wanted a truly "hard core" compact red dot sight, the Micro H-2 has a reinforced aluminum housing and integral flip-up covers to protect the lenses so it'll stand up to all types of environmental con-ditions. Cutting-edge optics and lens coat-ing deliver superior clarity of both the target and the reticle dot itself, leading to faster target acquisition and heightened shooter confidence. Of course, it's parallax-free, with unlimited eye relief, and 12 reticle brightness settings you can adjust it to meet almost any lighting condition. Machined ramps on the body provide snag-proof protection for the windage and elevation turrets. Compatible with both Weaver and Picatinny rails or it can be piggy-backed on to a larger optic. Fully waterproof to withstand whatever Mother Nature dishes out. SPECS: Aluminum body, matte black. 1x magnification. 2.6" (6.6cm) long, 1.6" (4.1cm) wide, 1.4" (3.5cm) high. 3.7 oz. (104.9g) wt. Runs 50,000 hours on one CR-2032 battery, included.

AIMPOINT

MICRO H-2 RED DOT SIGHTa compact optic Built to Work hard -

and Keep Working

#100-018-559AT 2 Moa h-2 sight, Only, 7A650L83 � � $ 706.00#100-018-558AT 2 Moa h-2 sight w/Low Mount,

7A663B33 � � � � � � � � � � � � � � � � � � � � � � � � 716.00#100-018-347AT 2 Moa h-2 sight w/Lrp Mount,

7A736A67 � � � � � � � � � � � � � � � � � � � � � � � � 796.00#100-018-557AT 4 Moa h-2 sight w/Low Mount,

7A663E33 � � � � � � � � � � � � � � � � � � � � � � � � 716.00

Aimpoint Magnifiers are de-signed to mount behind Aimpoint red dot sights and add magnification to help with long-range aiming or observation. Won't cause zero shifts when mounted, or when used in a flip mount. Professional models have fully-armored bodies to protect against impact, shock and the rigors of military or police operations, and have -3 to +3 di-optric adjustments to allow crystal-clear focus for any shooter's eye. Commercial model delivers the same level of optical clarity with -2 to +2 dioptric adjustments, but at a more economical price. Available in fixed 3x or 6x powers. 3x Professional model available alone, or with Twist Mount and Spacer included. 6x Professional model designed specifically for use with Aimpoint Micro T-2 and Micro H-2, sold separately.

AIMPOINT MAGNIFIERSturns red dot into

Magnified optic

6X-1 "Professional"

#100-019-320AT 3x commercial Magnifier, 7A255N83 � � � � � � � � � � � � � � � � � � � � � � � � $ 276.00

#100-019-321AT 3x professional Magnifier, 7A00FGB � � � � � � � � � � � � � � � � � � � � � � � � � 632.00

#100-019-322AT 3x professional Magnifier w/twist Mount & spacer, 7A1149A99 � � � � � � � 1149.99

#100-019-323AT 6x professional Magnifier, 7A763I33 � � � � � � � � � � � � � � � � � � � � � � � � � 816.00

3X-C "Commercial"

Replacement battery for most Starrett digital calipers, many compact red dot sights, and a variety

STARRETT CR-2032 LITHIUM BATTERYreplacement Battery For

a Wide Variety of powered devices

#749-000-220AT cr-2032 repl Battery for starrett calipers, 7B9C99 � � � � � � � � � � � � � � � � � � � �$ 9.99

of other battery-powered electronics. abSPECS: CR-2032, 3 volt lithium cell. Sold in 2 pak.

PAGE 271Orders/Tech: 800-741-0015order on the web

brownells.com

op

tic

s & a

cc

esso

rie

sr

ed

do

t sig

ht

s

Parallax-free aiming with a single, bright glowing red dot; proven to be the fastest, most accurate sighting system available. Exclusive Advanced Circuit Efficiency Technology (ACET) greatly improves the useable life of the single 3-volt battery. ACET sights can last nearly 50,000 hours (over five years on setting 7 out of 10) of constant use. AA battery model can last up to 80,000 hours with a single battery. All sight housings are machined or extruded from 6000 series aluminum for maximum strength without unec-essary added weight. Lens surfaces are optically ground (not cast) for superior clarity. Proprietary housing and lens sealing material keeps electronic and lens surfaces dry, fog-free and fully functional regardless of weather conditions. All models feature non-reflective, Mil-Spec anodized finishes. ab

tWistMoUNt For 3X MagNiFier - Quick-detach mount for Aimpoint 3x Magnifier lets you change instantly from long-range to CQB mode. Depress the release lever, twist the Magnifier, and lift it off for an unencumbered close-range sight picture. Low-profile base clamps to Picatinny-style rail; extra-long scope ring provides ample surface contact for a no-slip grasp on the magnifier body. May also be used as a quick-detach mount for other 30mm optics. Extra TwistMount bases sold separately, so you can quickly move your Magnifier from one rifle to another. co-Witness spacer raises sight axis for proper co-witnessing with factory-height backup iron sights. Comes with four, extra-length hex head screws and Allen wrench.SPECS: Aluminum, hardcoat anodized, matte black.#100-003-597AT twistMount complete,

7A181E67 � � � � � � � � � � � � � � � � � � � � � � � � � �$ 197.00#100-003-599AT twistMount Base, only,

7A124A00 � � � � � � � � � � � � � � � � � � � � � � � � � 124.00#100-004-137AT co-Witness spacer,

7A32M00 � � � � � � � � � � � � � � � � � � � � � � � � � � 32.00

teNeBraeX KiLLFLash® ard - Anti-Reflection Device screws into front lens opening of 9000SC and Comp series sights. Honeycomb filter dis-perses light to prevent reflections from front lens giving away your position without adversely af-fecting sight picture. Fits under the lens cover without modification.SPECS: Polymer, black. Fits 9000SC and Comp series sights.#100-003-624AT KillFlash® ard, 7A41E67 � � � � � � � � � � � � $ 45.00

repLaceMeNt LeNs coVers - Replace lost or broken lens cover with the factory o r i g i n a l part. Flip-Up covers – Spring-l o a d e d p o l y m e r covers flip open with finger pressure. Available in black or see-through clear Tight, friction-fit installation. Fit non-magnifying (1x) 9000 and Comp series, including C3, MPS3, and M4/M4S. Rear covers fit all Aimpoints with 30mm rear objectives, including Comp and 9000 series. Military – One-piece, rubber, slip-on style with loop that fits over quick-release knob on QRP and QRW mounts. Fits Comp M2, ML2, M3, ML3, M4, and M4S. Micro – One-piece, rubber, “bikini”-style cover for Micro series sights.SPECS: Fits Aimpoint Red Dot sights as indicated above. Flip-Up Covers – Molded polymer, black. Clear models have clear polymer windows in lid. Military & Micro – Rubber, black.#100-003-612AT Flip-Up Front cover, Blk, 7A17Q50 � � � $ 19.00#100-003-618AT Flip-Up Front cover, Clear,

7A17G50 � � � � � � � � � � � � � � � � � � � � � � � � � � 19.00#100-003-616AT Flip-Up rear cover, Blk, 7A17E50 � � � � 19.00#100-003-621AT Flip-Up rear cover, Clear,

7A17K50 � � � � � � � � � � � � � � � � � � � � � � � � � � � 19.00#100-003-623AT Military Lens cover, 7A12N00 � � � � � � � 12.00#100-003-625AT Micro Lens cover, 7A19G00� � � � � � � � � 19.00

repLaceMeNt dL1/3N BatterY - Factory recom-mended lithium battery fits 9000 series, CompC3, CompC SM, CompM2, CompML2, CompM3, CompML3, Laser Aiming Device LPI, 1000 se-ries, 3000 series, 5000 series, 7000 series, Comp, CompC, Comp XD, CompM, CompM XD, CompML, CompML XD.SPECS: 3-volt DL1/3N lithium battery

#100-005-215AT dL1/3N Lithium Battery, 5Z4E89 � � � $ 4.99

Micro series red dot sight. Lrp Quick-release conversion Kit converts the mount that came with your Micro to a quick release configuration that allows the sight to be removed from the firearm with the flip of the locking lever. Return sight to firearm without loss of zero in just seconds. Qd riser Mount allows mounting the Micro on any flattop AR-15/M16/M4 at the ideal height for quick, precise, head-up target acquisition. Lets you to retain and co-witness your rifle’s factory iron sights through the lower 1/3 of the Micro’s field of view, so they won’t interfere with the Micro's sight picture. Locking, quick-release lever for fast attachment and removal from rail; ma-chined recoil lug and side rail clamp ensure a rock solid installation. Provides the correct height for use with Aimpoint 3XMag Magnifier. Requires 21/8" (5.4cm) of rail space. dovetail Mount replaces the base that came with your Micro sight so you can mount it on any gun with a nominal 3/8" dovetail on the receiver.SPECS: LRP - Steel, matte black finish. LT660 & Dovetail - Aluminum, hard anodized, matte black.#100-003-575AS Lrp Quick-release conversion Kit,

7A40B00 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 40.00#100-003-578AS Lt 660 Qd riser Mount, 7A137E00 � � 137.00#100-003-576AS dovetail Mount, 7A85P00 � � � � � � � � � � 85.00

coMpM4/coMpM4s - The latest civilian version of the U.S. Army’s M68 CCO (Close Combat Optic), and the most advanced sight produced by Aimpoint. Super efficient electronics deliver up to eight years of continuous use from a single AA battery. Optics feature band pass objective lens coating for superb light transmission and optimum 3rd generation NVD compat-ibility. Newly improved rotary brightness switch provides 7 NVD settings and 9 daylight settings, plus one extra-bright setting for outdoor use with anti-reflective goggles. Excellent choice for var-mint hunters needing a rugged red dot optic with low light capa-bilities. Integral, QRP2 mount (no additional mount ring required) features a single, oversize thumbscrew for fast installation and removal from Picatinny rails. Mount includes a separate vertical spacer for fast adaptation to a wide range of firearms. Available with versatile 2MOA dot. Can be quickly converted to a 3x long-range red dot reticle scope by installing the optional Aimpoint 3XMag magnifying module listed below. compM4s has the same oper-ating features as the CompM4 and has the battery compartment positioned low, on the right side of the unit, for more clearance and improved view over the top of the optic.SPECS: Anodized finish, matte black. 4.7" (120 cm) long x 2.8" (7.2m) wide x 2.8" high. 11.8 oz. (335 g) wt. including mount. 1X magnification. Windage & Elevation: 1/2" adjustment 100 yds (13mm 100m). ACET = 80,000 hrs on one battery on daylight setting, 500,000 hrs on NV setting. Includes alkaline battery (1.5v, AA). Submersible to 150 feet (45m).#100-003-002AS compM4 2Moa, 7A863L00 � � � � � � � � $ 863.00#100-003-734AS compM4s 2Moa, 7A863J00 � � � � � � � 863.00

3XMag MagNiFier - Mounts on a Picatinny rail directly be-hind any Aimpoint red dot opti-cal sight to provide 3X magni-fication for improved accuracy when engaging small targets at long 420.00ranges. Durable rubber housing improves grip-ping surface and shields the module from damage caused by shock. Mounts to rail using a 30mm scope ring or the quick-detach Aimpoint TwistMount listed below. Mounting or dismounting will not change point-of-impact of your sight. Internal adjustments allow alignment with your pre-zeroed sight.SPECS: Aluminum, anodized, dark grey, rubber coated, black. 4.3" (11cm) long x 1.7" (4.4cm) high, 1.6" (4.1cm) diameter. 7.1 oz. (200g) wt. Sub-mersible to 67 feet (20m). Requires 30mm mounting ring for installation.#100-002-981AS 3XMag Magnifier, 7A632M00 � � � � � � $ 632.00

Micro series - Ultra Compact to reduce weight and bulk, plus easy to remove and install on multiple firearms. Provides an easy-to-see, bright red LED aiming dot for hunting and tactical applications. Both models include an integral Weaver-style mount that attaches easily without knobs, and is keyed to the sight body to absorb recoil. Fully adjustable for windage and elevation; adjustment tool is an integral part of the adjustment knob caps so you never loose it. Micro h-1 is designed for hunt-ing/sporting applications and is submersible to 15 feet. Can be mounted on shotguns, rifles, handguns, and bows, and includes 12 daylight settings and one extra-bright setting. Micro t-1 is de-signed for tactical use; includes band pass lens coating with 6 night vision/7 daylight settings, so it’s fully compatible with all genera-tions of Night Vision Devices, and submersible to 80 feet. Features integral Picatinny base.SPECS: Anodized, matte black. 2.4" (6.2cm) long x 2.4" wide x 1.6" (3.6mm) high, including mount. 3.7 oz. (105g) wt including mount. 1X magnifica-tion. Both models available with 2 or 4 MOA dot (see below). 1/2" adjust-ment 100 yds (13mm 100m). 50,000 hrs (5+ years) continuous use on one CR-2032 lithium battery. #100-003-004AS Micro h-1, 4 MOA, 7A642P00 � � � � � � $ 642.00#100-009-907AS Micro h-1, 2 MOA, 7A642B00 � � � � � � 642.00#100-003-003AS Micro t-1, 4 MOA, 7A719G00� � � � � � � 719.00#100-009-905AS Micro t-1, 2 MOA, 7A719L00 � � � � � � � 719.00

Micro h-1 W/ar-15 FLattop MoUNt - AR-specific version of the popular Micro H-1 has an integral, quick-release riser mount, ready to install on any AR-15/M16/M4 flat-top rifle. Riser aids in comfortable, heads-up aiming, while providing the correct elevation to co-witness with mil-spec “iron” sights. Positions the backup sights in the lower 1/3 of the Micro’s field of view for instant transi-tion to them. Quick-detach LRP (Le-ver Release Picatinny) mount lets you remove the H-1 from the rifle with a flip of the locking lever and return it without loss of zero.SPECS: Aluminum, anodized finish, matte black. 2.4" (6.1cm) long, 1.6" (4.1cm) wide, 2.6" (6.7cm) high, including mount and spacer. 6 oz. (170g) wt.#100-006-838AS Micro h-1 w/ar-15 Mount,

7A595N00 � � � � � � � � � � � � � � � � � � � � � � � � $ 595.00

Micro MoUNts - Precision machined aluminum and steel components pro-vide more mount-ing options to in-crease the versatil-ity of your Aimpoint

AIMPOINT

RED DOT OPTICAL SIGHTSrugged, No-Fail sight systems For hunting, target shooting &

tactical applications

LRP Conversion Kit

LRP Conversion Kit

The Brownells CQB T-Dot Sight is designed for com-bat and competition shoot-ers who frequently address targets at close quarters. It corrects a common problem with combat-zeroed optics mounted on an AR-type rifle: the point of impact is significantly lower than the point of aim at close quarters distances. Built by EOTech exclusively for Brownells and based on the popular EOTech EXPS2, the CQB T-Dot eliminates the “guesstimating” when aiming at these targets. It retains the parent design’s 65 MOA circle illuminated reticle with two aiming points calibrated for 50-200 yards and 500 yards. The bottom of the T-Dot’s circle is left open, with a “T” indicating a precise aiming reference zeroed for about 7 yards. All aiming points are calibrated for 5.56mm NATO ammuni-tion. Windage and elevation are adjustable in 1/2 MOA increments. The CQB T-Dot clamps directly to a MIL-STD 1913 Picatinny rail (only 23/4" rail space required) with a built-in quick-detach throw-lever mount. A built-in riser enables lower one-third co-witness with A2-type iron sights. The reticle has 20 brightness settings selected using the control buttons on the left side and is powered by one CR-123 lithium battery (included), easily accessed through the side cap. Sealed, non-magnifying optics are fogproof, shatter-resistant, and anti-glare coated. abSPECS: Aluminum housing, hardcoat anodized, matte black. 3.5" long x 2.4" wide x 2.8" high. 11.2 oz. (317g) wt. Windage and elevation adjustment range +/- 40 MOA in 1/2 MOA clicks (1/2" at 100 yards). Brightness adjust-ment range: 146,000:1, brightest to lowest. 20 brightness settings. Uses one (1) CR-123A lithium battery; approx. 600 hour battery life. Operating temperature range -40° to +150° F. Submersible to 10 ft depth.

/EOTECH

CQB T-DOT HOLOGRAPHIC SIGHT“t” aiming point calibrated to eliminate guesswork in

close-range targeting

#080-000-971AT cQB t-dot sight, 9K549P99 � � � � � � � $ 549.99

Reticle

Red dot sight gives the user a choice of four different reticles based on the trajectory of a 55-grain 5.56 bullet. Reticle styles are: 2 MOA dot, circle dot,

crosshair with holdover dots, and chevron with holdover dots. Au-tomatic brightness setting adjusts to ambient light conditions; also has 7 user-selectable brightness settings. Integral mount clamps to standard Picatinny rail and gives proper height for lower one-third co-witness with iron sights. Unlimited eye-relief give you plenty of flexibility in mounting position. Elevation and windage knobs give 1/2 MOA adjustments, and covers are leashed to prevent loss in the field. SPECS: Cast aluminum frame. 51/2" (13.9cm) long, 3" (7.6cm) high, 21/2" (6.3cm) wide. 13 oz. (368g) wt. Runs on one AAA battery life, not included. Auto-shutoff after 2 hours. Battery life up to 1,000 hrs.

LUCID

HD7 RED DOT SIGHTVersatile sight With 4 User-settable reticle styles & 7

Brightness settings

#100-013-381AT Lucid hd7 red dot sight, Black, 2D249M00 � � � � � � � � � � � � � � � � � � � � � � � $ 249.00

#100-015-680AT Lucid hd7 red dot sight, FDE, 2D259Q00 � � � � � � � � � � � � � � � � � � � � � � � 259.00

hd7 sight Kill Flash - Made specifically for the HD7 red dot sight, this honeycomb filter reduces annoy-ing lens glare and reflection, plus it provides an extra level of protection for the objective lens. SPECS: 6061 T6 aluminum, T3 mil-spec anodized, matte black. 0.2 oz. (5.7g) wt. #100-015-686AT hd7 sight Kill Flash, 2D39I00 � � � � � � � �$ 39.00

PAGE 272 Office/Tech: 641-623-5401SATISFACTION GUARANTEED

SINCE 1939

op

tic

s &

ac

ce

sso

rie

s

Weatherproof, shockproof holo-graphic rifle sight has a variable-inten-sity reticle that is visible in any light. As

long as the operator can see through any portion of the window, the entire reticle is visible on the target. All models (except 552.XR308) feature a dot-within-a-circle reticle that presents a see-through pattern for lightening-quick target acquisition. Heads-up display eliminates blind spots and tunnel vision. Gives true, both eyes open shooting for instant target identification. Electronics are encapsu-lated in a shock absorbing resin compound and sealed against dirt and water. Shatterproof lens has an anti-reflective coating. Light signature is not visible from the front. All user controls are flush with the housing, no protruding knobs or mounting rings to snag or block vision. Integral mount fits Weaver-style and Picatinny bases. Alumi-num “roll bar” hood protects display. Model 552 and 552�Xr308 are night vision compatible with a brightness range of 1,000:1 with NV switch engaged. Model 552�Xr308 has a ballistic drop compen-sated reticle for .308 ammunition, with hash marks calibrated for 600, 900, and 1,200 meters. Model 512 has no provisions for night vision equipment. 552�LBc2 includes the LBC2 laser sight system, described below. Model 512 w/Upgrade Kit includes the sight plus a GG&G dual flip-up lens cover set and the GG&G Accucam lever-operated quick-detach Picatinny mount. abSPECS: Polycarbonate body, aluminum hood, matte, black. Lens - 3/16" thick, 3-layer, shatterproof laminate glass. Reticle size: 1 MOA dot and 65 MOA ring. 512, 552 & 552.XR308 - 55/16" (13.5cm) long, 115/16" wide, 23/8" high. 11.5 oz. (326 g) wt. Uses two AA batteries, included. 512.LBC - 51/2" (13.7cm) long, 2" (5.1cm) wide, 21/4" (5.7cm) high. 10.9 oz. (309 grams) wt. 552.LBC2 - 51/2" long, 23/4" (7cm) wide, 21/4" high. 12.6 oz (357g) wt. 553 - 415/16" (12.4cm) long, 115/16" wide, 23/4" (7.1cm) high, 12.2 oz. (345g) wt. Uses two CR-123A lithium batteries, included.

formation for the 300 AAC Blackout cartridge, a 65 MOA circle and two vertically-aligned aiming dots. Xps3-0 is night-vision compatible with a night vision brightness range of 1,280:1 with NV switch engaged. extreme-Xps (eXps) models feature a bat-tery compartment positioned above the base so the sight can be mounted closer to the Delta ring. A slightly higher base positions the viewing window to co-witness with iron sights. Quick-release rail mounting system has a release lever that fits flush along the side of the sight, so the EXPS is no bulkier than the XPS. A locking tab prevents accidental lever release. Control buttons on the left side of the housing. eXps2-0/eXps3-0 - 65 MOA circle/1 MOA center dot reticle. eXps2-2/eXps3-2 - 65 MOA circle with two vertically-aligned center dots, one for targeting out to 200 yards, other out to 500 yards. - 65 MOA circle/1 MOA center dot reticle. eXps3-4 - four stacked dots, representing 0-300, 400, 500 and 600 yard aiming points. eXps3 models are Gen I-III+ night-vision compatible. SPECS: Aluminum housing, hardcoat anodized, matte black. Windage and elevation adjustment range +/-40 MOA in 1/2 MOA clicks (1/2" at 100 yards). Brightness adjustment range: 146,000:1, brightest to lowest. 20 brightness settings; night-vision compatible models have additional 10 NV settings. Brightness range in NV mode: 1,280:1. XPS - 3.675" (9.3cm) long x 2.125" (5.4cm) wide x 2.375" (6cm) high. 8.8 oz. (250g) weight. EXPS - 3.675" long x 2.25" (5.7cm) wide x 2.75" (7cm) high. 11.2 oz. (317g) weight.#100-004-277AS Xps2-0 sight, 9K00IYI � � � � � � � � � � � � � $ 499.00#100-012-625AS Xps-1 sight, 9K499E00 � � � � � � � � � � � � 499.00#100-012-626AS Xps2-2 sight, 9K499M00 � � � � � � � � � � 499.00#100-012-627AS Xps2-300 sight, 9K509E00 � � � � � � � � 509.00#100-004-498AS Xps3-0 sight, 9K00HJB � � � � � � � � � � � 589.00#100-012-623AS eXps2-0 sight, Black, 9K539C00 � � � 539.00#100-012-624AS eXps2-2 sight, Black, 9K539M00 � � � 539.00#100-005-734AS eXps3-0 sight, Black, 9K00DSF � � � � 629.00#100-012-620AS eXps3-0 sight, Tan, 9K629H00 � � � � � 629.00#100-005-735AS eXps3-2 sight, Black, 9K00CEG � � � � 629.00#100-012-621AS eXps3-2 sight, Tan, 9K629L00 � � � � � 629.00#100-006-647AS eXps3-4 sight, Black, 9K00BZQ � � � � 629.00

g33�sts MagNiFier - Third-generation add-on optic system helps greatly increase the effective reach of any EOTECH Holo-graphic Weapon Sight (HWS) without com-promising close-range ability. 3x Magnifier mounts directly behind the HWS, requires no adjustments to the HWS itself and leaves the point of aim unchanged. Finger-adjust-able windage and elevation knobs make sight corrections easy. Sealed, fogproof, submersible to 33 ft., and fully adjustable for windage and elevation. Switch-To-Side (STS) mount lets you instantly transition between magnified and un-magnified viewing with a slap of your hand. Mount can be installed to flip to either left or right side. Quick-detach lever enables easy mount/dismount on any Picatinny rail, and included riser allows optic to align with 7mm raised sights. Available in black or tan.SPECS: Aluminum, hardcoat anodized, matte black. 3.9" (9.9cm) long. 11.9 oz. (337g) wt. Actual magnification 3.25x. Eye relief 2.2" (5.5cm). Field of view 7.3°. Operating temperature range -40° to 160° F.#100-010-865AS Xg33�sts Magnifier, Black,

9K00AQR� � � � � � � � � � � � � � � � � � � � � � � � � $ 549.00#100-012-628AS Xg33�sts Magnifier, Tan,

9K549L00 � � � � � � � � � � � � � � � � � � � � � � � � 549.00

hhs sight/MagNiFier sets - Combines an EXPS series sight with the G33.STS magnifier to provide a sighting system with maximum versatility. Magnifier aids target acquisition at longer ranges and can be quickly flipped to the side for clear access to the non-mag-nifying EXPS alone in close-quarter engagements. Both units feature quick release levers and will at-tach easily to any flattop AR-15/M16 rifle. hhs i has a night vison compatible EXPS3-4 sight featuring a ballistically compensated reticle calibrated for the 5.56 NATO cartridge fired from a carbine-length barrel, with aiming dots for engaging targets at 0-300m,

use with night vision gear.SPECS: 5.4" (137mm) long, 2.77" (70mm) wide, 2.25" (57mm) high. 12.6 oz (357 g) wt. Class 3R laser. Laser system is waterproof and submers-ible to 10 ft.#100-014-611AS LBc w/red Laser, 1Z265A00 � � � � � � � $ 265.00#100-014-610AS LBc2 w/red + ir Lasers, 1Z395I00 � � 395.00

repLaceMeNt parts - Genuine factory replacement parts fit perfectly and help you keep your EOTech sight running like new. Aluminum protective hoods for 511/512/551/552 series and model 553 are available in matte black. Hood installation requires the four, T-15 Torx®-head screws in the hood Mounting screw Kit, avail-able separately. Polymer Battery compartments are available for N-cell powered 500 series, pre-2009 model 512/552 sights that use AA-cells, and model 553 (two CR-123A cells). Battery compart-ment repair Kits are available to repair the spring or rubber grom-mets on battery compartment caps on pre-2009 512/552 sights. Battery caps with new style tether available to replace lost or damaged battery caps on XPS/EXPS sights. Mounting hardware kit contains an Allen head cross-bolt and wrench, Weaver-style slotted mount bolt, plastic washer, and Weaver lock bar. Fits 511, 512, 551, 552 sights only.SPECS: Protective Hoods - Aluminum, anodized, matte black. Hood Screws/Mounting Hardware Kit – hardened steel, matte black. Battery Compartments – Reinforced molded polymer.#100-005-846AS 511/512/551/552 protective hood,

Black, 9K32E00 � � � � � � � � � � � � � � � � � � � � $ 32.00#100-005-845AS protective hood, Black, 9K18B00 � � � � 18.00#100-005-847AS hood Mounting screw Kit, 9K6I99� � � 6.99#100-005-848AS 511/512/551/552 Mounting hardware,

9K22Q00 � � � � � � � � � � � � � � � � � � � � � � � � � � 22.00#100-005-843AS 502/511/551 Battery compartment,

9K18I00 � � � � � � � � � � � � � � � � � � � � � � � � � � � 18.00#100-005-842AS pre-2009 512/552 Battery

compartment, 9K20P00 � � � � � � � � � � � 20.00#100-008-121AS post-2009 512/552 Battery

compartment, 9K13K99 � � � � � � � � � � � � 13.99#100-005-844AS 553 Battery compartment, Tan,

9K18Q00 � � � � � � � � � � � � � � � � � � � � � � � � � � 18.00#100-008-122AS pre-2009 512/552 Batt� comp� repair

Kit, 9K4E99 � � � � � � � � � � � � � � � � � � � � � � � 4.99#100-008-123AS Xps/eXps Battery cap w/cable

tether, 9K22A00 � � � � � � � � � � � � � � � � � � � 22.00

Xps/eXps series - The most compact EOTech holographic weapon sight se-ries yet. Runs on a single CR-123 battery, yet delivers up to 600 hours of continu-ous operation. Overall sight length is less than 33/4" because the battery is mounted crossways, at the front of the housing. Sealed, waterproof buttons let you activate the high-visibility red reticle and precisely adjust the brightness level for any ambient light con-ditions. Automatically shuts off after 8 hours (user may reset to 4 hours) to preserve battery life. Fully adjustable for windage and elevation in 1/2 MOA clicks. Non-magnifying, fogproof optics of shatter-resistant, anti-glare coated laminate provide exceptional clarity. Base requires only 23/4" of rail space; fits MIL-STD 1913 Picatinny rail. O-ring sealed battery cap keeps out moisture (sub-mersible to 10-ft. depth). Standard XPS models have rear-mounted control buttons. Xps2-0 - reticle is an easy-to-see 65 MOA circle with a 1 MOA aiming dot in the center. Xps2-1 has only 1 MOA center dot without the circle. Xps-2-2 has the 65 MOA circle with a dot for up to 200 yards and a second dot for ranges out to 500 yards. Xps2-300 has a specially engraved hood with ballistic in-

518/558 - Latest development of the classic 512 series offers all the features of the top-of-the-line EXPS sights, plus the convenience of running on easy-to-find AA batteries (lithium, alkaline, and rechargeables all work). Side-mounted control buttons make it easy to pair up this sight with an EOTech magnifier. Also compatible with EOTech's drop-in Laser Battery Caps to enhance your aiming options with visible and IR lasers. Built-in mount with quick-release lever fits MIL-STD 1913 Picatinny rails. Reticle is a red 65 MOA ring with a 1 MOA dot in the center. 518 has 20 daylight retcile brightness settings. 558 is compatible with Gen I-III night vision devices (NVD), with 20 daylight settings and 10 NVD reticle brightness settings. SPECS: Aluminum housing, hardcoat anodized, matte black. 5.6" long x 2.2" wide x 2.9" high. #100-017-311AT 518 eotech hWs, 9K499P00 � � � � � � $ 499.00#100-017-310AT 558 eotech hWs, 9K589N00 � � � � � � 589.00

LBc (Laser BatterY cap) Laser sight - The LBC replaces the original battery cap on any 512/552 EOTech model to give you the added versatility of integrated laser sighting. Lasers are easily activated with the on/off toggle switch. Windage and elevation adjustable. Uses two AA batteries that power both the main EOTech unit and the laser. LBc has the visible red laser only. LBc2 has visible red plus civilian-legal IR laser for

EOTECH

HOLOGRAPHIC SIGHTprovides extremely Fast, heads

Up target engagement For close Quarters & Long range shooting

#100-001-738AT 512 eotech holographic sight, 9K00DQQ � � � � � � � � � � � � � � � � � � � � � � � � $ 429.00

#100-006-961AT 512 w/Upgrade Kit, 9K557H96 � � � � � 557.96#100-000-909AT 552 eotech holographic sight,

9K00GYK � � � � � � � � � � � � � � � � � � � � � � � � � 529.00#100-003-196AT 552Xr308 eotech holographic

sight, 9K00QYB � � � � � � � � � � � � � � � � � � 579.00#100-014-612AT 552�LBc2 holographic sight w/red

& ir Laser, 9K895H00 � � � � � � � � � � � � � 895.00

Mounting Hardware

Hood

Battery Compartments

Screw Kit

Battery Cap w/ Tether

Battery Comp. Repair Kit

400m, 500m, and 600m. hhs ii has an EXPS2-2 sight featuring two vertically-aligned 1 MOA aiming dots ballistic-matched for the M4 carbine at 50/200m and 500m. Not night vision compatible.SPECS: Aluminum housing, hardcoat anodized, matte black. 8.1" (20.6cm) approx. OAL with magnifier installed behind sight, 2.25" (5.7cm) wide, 2.75" (7cm) high. 11.2 oz. (317g) wt. EXPS3-4 runs on one CR-123A lithium battery, included. Battery life is 500-600 hrs at setting 12.#100-007-265AS hhs i eXps3-4/Magnifier set,

9K00BZD � � � � � � � � � � � � � � � � � � � � � � � � $ 1089.00#100-011-155AS hhs ii eXps2-2/Magnifier set,

9K00MEP � � � � � � � � � � � � � � � � � � � � � � � � 1019.00

The RTS2 reflex sight gives a heads-up, red-dot display in a very compact yet ex-tremely robust package. It has a rounded glass lens for a wide field of view, a 10-posi-tion dot intensity control, and precision click adjustments with locks for pin-point accuracy. It runs on one CR-2032 lithium battery that can be changed without affecting zero. Integral mounting base attaches to any Picatinny or Weaver rail. SPECS: Machined aluminum housing, matte black finish. 2" (5cm) long, 1.1" (2.9cm) wide, 1.4" (3.7cm) high. Picatinny/Weaver base included.

C-MORE RTS2 RED DOT SIGHThelps You get on target Fast With Both

eyes open

RTS2

#100-015-452AT rts2 red dot sight, 3 MOA, 4H00GHI � � � � � � � � � � � � � � � � � � � � � � � � � $ 419.00

#100-200-342AT rts2 red dot sight, 6 MOA, 4H419Q00 � � � � � � � � � � � � � � � � � � � � � � � 419.00

When installed behind a non-magnifying red-dot sight, this add-on optic provides a true 3x system for accurately engaging targets at longer ranges. Water-proof, fogproof and shockproof, the AR-Tripler has fully multi-coated lenses to deliver excellent brightness and clarity. Power but-ton allows you to select either a

red or green illuminated reticle, plus adjust brightness level. Wind-age and elevation knobs allow you to adjust the magnifier on the red center-dot of the sight for maximum effectiveness. Designed for use with AR-style rifles firing 5.56/.223 ammunition. In situations where magnification isn’t needed, the quick-attach/detach AR-QD Pivot Ring Picatinny mount lets you quickly and securely flip the magni-fier aside with the push of a button. To reengage magnifier, simply flip it back into position and it locks into place. AR-QD Pivot Ring is also sold separately and works with other 30mm tube magnifiers.SPECS: AR-Tripler Magnifier – Aluminum housing, hardcoat anodized, matte black. 4.84" (12.3cm) OAL. 30mm tube. 9.1 oz. (258g) wt. 15/8" (4.1cm) above rail at center line (when using AR-QD Pivot Ring). Eye relief 2.5" (6.4cm). FOV 34′ 100 yds. Waterproof. Works with many common red-dot sights. Not recommended for use with magnified optics. AR-QD Pivot Ring – Aluminum housing, hardcoat anodized, matte black. Fits 30 mm tubes. 1" (2.5cm) high. Not recommended for use as mount for primary optic.

BURRIS AR-15/M16

AR-TRIPLER™ GEN2 MAGNIFIERadds 3x Magnification to a 1x optic For Longer range shots

#118-000-122AT ar-tripler gen2 w/ar-Qd Mount, 8A249C00 � � � � � � � � � � � � � � � � � � � � � � � � $ 249.00

#118-000-043AT ar-tripler gen2 Magnifier, Only, 8A249F00 � � � � � � � � � � � � � � � � � � � � � � � � 249.00

#118-000-045AT ar-Qd pivot ring, Only, 8A99I99 � � � 99.99

re

d d

ot

sig

ht

s

OP

TIC

S & A

CC

ESSO

RIE

S

PAGE 273Orders/Tech: 800-741-0015order on the web

brownells.com

Small, tough red dot sights give shooters choice of reticle for differ-ent types of shooting, and offer long battery life. Simple push-button con-trol allows user to change through 4 reticle types. SIS has reticles with ei-ther 8 MOA center dot for fast shoot-ing up close, or 1 MOA center dot for precision aiming at long range. BD model uses a 2 MOA center dot, and includes bullet drop compensator dot system calibrated for the similar trajectories of the 5.56mm and 7.62 NATO, allowing accurate engagement of targets from 50m out to 500m. Based on the current military issue sight in the UK, the SIS sights have rugged aluminum housings and are dependable and combat-proven. Comes with variable triple-height mount to achieve perfect eye alignment and co-witness with iron sights. SPECS: Battery: 1 CR 2032 Lithium, inlcuded. Runtime: Up to 1 year, con-stant on. 2.1 oz (60g) wt.

Shield SightS SiS Red dot SightSmall, Tough Red Dot Sight Gives

4 Different Reticles

#100-018-850At SIS w/BD Comp Reticle, 2A437Q75 � �$ 499.99#100-018-851At SIS, 2A499H99 � � � � � � � � � � � � � � � � � � � 499.99

Classic red dot sight system can be installed on a variety of handguns, rifles and shotguns. Tough elec-tronics stand up to recoil even from hard-hitting magnums. Choose from “Click Switch” (Click) that adjusts reticle brightness with precise clicks, or standard dial rheostat (Dial) for smooth adjustments. Runs on readily available 3-volt lithium batteries, with a runtime of up to 1,500 hours. Gives up to 800 MOA of windage/el-evation adjustments; locks in with screws, so you can achieve - and maintain - pin-point precision. Railway clamps to any Picatinny or Weaver rail. Single crossbolt gives you great flexibility in where you position the sight on the rail. Available with housing of reinforced Polymer or, for added strength, Aluminum alloy. Ultra-compact Tactical model fits onto flattop AR-15/M16/M4 upper receivers and has an integral A2-style backup rear sight; aluminum housing with a matte black hard-anodized finish. All C-MORE sights use inter-changeable dot modules, so you change the size of your sight's dot any time. Extra dot modules sold separately - see our website. ab

C-MoRe SYSteMS RAilWAY & tACtiCAl Red dot SightS

Fast, Instinctive Reflex Sights; Fully Adjustable For

Brightness & Windage/Elevation

#100-200-335At Polymer Railway, 8 MOA/Dial, 4H00BIJ� � � � � � � � � � � � � � � � � � � � � � � � � � �$ 229.99

#100-200-336At Polymer Railway, 8 MOA/Click, 4H00EWR � � � � � � � � � � � � � � � � � � � � � � � � � 269.99

#100-015-456At Alum. Railway, 8 MOA, 4H00LJL � � � � � 349.99#100-015-457At Alum. Tactical, 4 MOA/Blk, 4H00HWS � � 359.99

Railway

Tactical

Leupold's highly versatile Del-taPoint™ Pro reflex sight is equally effective when mounted on a hand-gun, shotgun, or tactical rifle. Gives classic intuitive red dot targeting that helps master marksmen and novice

shooters alike hit the target with speed and precision. Lightweight aluminum housing is shrouded by spring steel for maximum shock resistance. Non-magnifying aspheric lens gives a wide field-of-view with superb image quality, while Leupold’s Motion Sensor Technol-ogy™ immediately detects any movement of the sight and turns it on - no need to fumble with switches. Auto-Brightness sensor immediately adjusts optimal reticle intensity, yet can be overridden if you want manual control. For tactical situations, the built-in light tunnel reduces the light signature caused by the reticle. Tool-less entry to battery compartment makes changing the batteries easy. 60 MOA elevation/windage adjustment in 1 MOA increments, with no need for adjustment lock screws. Includes battery, and protec-tive cover. Cross Slot Mount lets you attach sight on a Picatinny or Weaver rail. Cross Slot Riser sets places sight higher off the rail for a better sight picture. Made specifically for handguns, the Rear Iron Sight Mount attaches to the end of the optic to provide a co-witness between the iron sights and the red-dot, plus it proves a back-up in case of battery failure. abSPECS: Aluminum housing, hardcoat anodized, matte black. 1.8" (46.5mm) long x 1.3" (33mm) wide x 1.3" high. 1.95 oz. (41g) wt. Waterproof tested to 66 feet. Runs on one CR-2032 battery.

leupold deltApoint pRo Red dot Sight

Speedy, Intuitive Targeting In A Rugged, Ultra-Compact Package

#526-000-275At DeltaPoint Sight, 2.5 MOA Dot, 4K399J99 � � � � � � � � � � � � � � � � � � � � � � � � $ 399.99

#526-000-274At DeltaPoint Sight, 7.5 MOA Chevron, 4K399M99 � � � � � � � � � � � � � � � � � � � � � � � � 399.99

#526-000-280At Deltapoint All-Pistol Mount, 4K155N99 � � � � � � � � � � � � � � � � � � � � � � � � 155.99

#526-000-279At Deltapoint Pro Rear Iron Sight, 4K75A99 � � � � � � � � � � � � � � � � � � � � � � � � � 75.99

#526-000-277At Deltapoint Pro Cross Slot Mount , 4K99Q99 � � � � � � � � � � � � � � � � � � � � � � � � � 99.99

#526-000-278At Deltapoint Pro Cross Slot Riser, 4K63G99 � � � � � � � � � � � � � � � � � � � � � � � � � 63.99

Flexible rubber body with spring-loaded, ABS plastic covers help seal out dirt, dust and moisture to keep the lens surfaces of your EOTech holographic sight clean, scratch-free, and ready for use in all shooting condi-tions. Tabs on the right and left sides of the covers allow a fast, ambidextrous flip-open action with thumb or finger pressure. Front cover opens to near horizontal position to help block rain or sun-light. Rear cover folds back on top of the EOTech’s protective hood to ensure an unobstructed view through the sight. Body section installs under the EOTech protective hood, so it’s not even visible. Noise-absorbing neoprene pads dampen the sound of the rear lens cover contacting the hood during covert operations. abSPECS: Rubber body, ABS plastic covers, neoprene pads, matte black. 1 oz. (28.4g) weight. Includes Torx wrenches for installation. 511/512/551/552 - 23/8" (5.9cm) long, 17/8" (4.8cm) wide, 17/16" (3.6cm) high. Fits EOTech models 511, 512, 551, and 552. XPS2/3 - 23/8" long, 2¼" (5.7cm) wide, 1½" (3.8cm) high. Fits EOTech models XPS2 and XPS3 only.

Fast, Flip-Open Design; Protects The Lenses From Weather & Damage

#336-000-007At EOTech Lens Covers, 6C33Q83 � � � � � �$ 36.79#336-000-038At XPS2/3 Lens Cover, 6C39F24 � � � � � � � � 41.99

gg&g

eoteCh lenS CoVeR Module

Waterproof, shock-proof, red dot sight con-trasts against shooting backgrounds in low- and regular-light situa-tions for fast, easy, sight pickup on your rifle, handgun, or pistol. Click adjustments for windage and elevation and eleven, dot-intensity settings let you adjust to varying shooting situations. Crystal clear lens is hard coated for scratch resistance and is parallax free. In-cludes a 2032 lithium battery and weaver -style rings.SPECS: Aluminum, matte black finish. SP-1 – 3 minute dot, 1" (2.54cm) O.D. SP-2 – 5 minute dot, 30mm (1.18") O.D.

Millett Red dot SightSRed Dot Gives Fast Sight Recognition;

Customizes To Your Shooting Situation

#601-000-037At SP-1 Black, 7K57I29 � � � � � � � � � � � � � � � � $ 59.99#601-000-039At SP-2 Black, 7K56M17 � � � � � � � � � � � � � � � 59.99

Compact and lightweight, this microelectronic reflex sight provides a nearly unrestricted field of view for rapid target acquisition. Small size

doesn’t affect gun balance and handling. Features an always-on, micro-chip control that requires no switches or adjustments. LED insert senses light level and automatically sets dot brightness for op-timum visibility in all ambient light conditions. Snap-on, protective cover extends battery life, protects lens from dust and dirt. Has 25" of windage/elevation adjustment at 20 yds. Fits the same bases and mounts as the Fire Point and Tasco Optima sights. Reticle options: 4 or 8 MOA dot, or 65 MOA circle for very close range with a 1 MOA center dot for farther targets (Circle/Dot). SPECS: Polymer body, black, matte finish. 1" (2.5cm) wide, 1.6" (4.1cm) long, .9" (23mm) high. 1/2 oz. (14 g) weight. Uses (1) CR 2032 lithium battery, included. 2 to 3 years of battery life.

Jp enteRpRiSeS Jpoint® SightProvides Fast Target Acquisition

For All Weapon Types

#452-000-016At 4 MOA JPoint Sight, 2E270I18 � � � � � � $ 284.95#452-000-017At 8 MOA JPoint Sight, 2E270B18 � � � � � 284.95#452-000-204At Circle/Dot JPoint Sight, 2E00BBD � � 284.99

RX01/RX34 REFLEX SIGHT - Uses ambient light reflected through a fiber optic system, combined with glow-in-the-dark Tritium, to create an easy-to-see amber-colored aiming dot with excellent contrast in all light conditions. No batteries to weaken or wear out, no switches to turn on and off. RX01 has a large 6.5 MOA dot and 24mm diameter objective; RX34 has a 4.5 MOA dot and 42mm diameter objective. Combat tested, all-machined, aluminum housing is rugged enough to protect the optics in the toughest conditions without failure. Separate mounts allow one Reflex Sight to be used in several applications. No-gunsmithing, clamp-on mounts return to zero after installation and removal.SPECS: RX01 Reflex Sight - Aluminum housing, gray, hard-anodized fin-ish, 41/4" (10.7cm) long, 4.2 oz. (119 g) wt. 24mm objective diameter. 6.5 MOA dot. RX34 Reflex Sight - Aluminum housing, gray, hard-anodized finish, 47/8" (12.4cm) long. 8.2 oz. (232g) wt. 42mm diameter objective, 4.5 MOA dot. Mounts - Aluminum, black, anodized finish. RX10 fits AR-15/M16 carry handle. RX11 fits Weaver-style rails, dual locking screws. RX14 fits Picatinny flattop AR-15/M16 receivers, dual locking thumbscrew.#892-110-001At RX01 Reflex Sight, 2H442L00 � � � � � � $ 442.00#892-000-068At RX34 Reflex Sight, 2H531P00 � � � � � � 531.00#892-110-010At RX10 Reflex Sight Mount,

2H142K00 � � � � � � � � � � � � � � � � � � � � � � � � 142.00#892-110-011At RX11 Reflex Sight Mount,

2H64K00 � � � � � � � � � � � � � � � � � � � � � � � � � 64.00#892-110-014At RX14 Reflex Sight Mount,

2H116M00 � � � � � � � � � � � � � � � � � � � � � � � � 116.00

RX30 REFLEX SIGHT & FLATTOP MOUNT - Same non-magni-fying, dual-illumination system and 6.5 MOA amber dot as RX01, with larger 42mm objective for maximum light-gathering capability and fast target ac-quisition. Multi-layer, dichroic-mirror coated lens for outstanding heads-up, both-eye-open targeting. Adjustable for windage and elevation +/-30 MOA, one click per inch at 100 yards. Housing is investment cast from A357-T6 aluminum alloy; mount of forged 7075-T6 aluminum provides rock-solid mounting to any MIL-STD 1913 Picatinny flat-top rail, with return to zero after removal and reinstallation.SPECS: Aluminum housing and mount, hard-anodized, dark gray, matte finish. 47/8" (12.4cm) long, 21/16" (5.2cm) wide. 12.3 oz. (348g) weight. 42mm objective diameter. Includes lens cleaning pen, Allen wrench, and instruction booklet.#892-000-038At RX30 Reflex w/Flattop Mount,

2H649A00 � � � � � � � � � � � � � � � � � � � � � � � � $ 649.00

RX06 REFLEX II SIGHT - Advanced op-tics provide enhanced, wide-band, light transmission for faster target acquisition in a broad range of shooting situations. 12.5 MOA Triangle reticle gives lightning fast, very precise aiming in bright daylight or total darkness at any distance. Includes polarizing filter, rubber lens cover and lens cleaning pen. Select from sight mounts above.SPECS: Aluminum housing, gray, hard-anodized finish, 41/4" (10.7cm) long, 4.2 oz. (119g) wt.#892-112-125At RX06 Reflex II Triangle Sight,

2H442B00 � � � � � � � � � � � � � � � � � � � � � � � � $ 442.00

TENEBRAEX KILLFLASH GUARD - Anti-reflection device prevents glare and reflected images from interfering with sight picture on Reflex sights.SPECS: Aluminum, matte, black. Honeycomb screen. .76" (19.3mm) long 1.1" (2.8cm) diameter.#892-802-022At Killflash, 2H35C00 � � � � � � � � � � � � � � � � � $ 35.00

ab

tRiJiCon®

ACog ReFleX SightBright, Glowing, Aiming Dot In All Conditions,

Without Batteries

RE

D D

OT

SIGH

TS

Compact reflex sight boasts a large, 25mm objective lens for enhanced light gathering capabilities, better situational awareness and faster target acquisition. Sight has a crisp, 2 MOA red dot reticle with 70 MOA

windage and elevation adjustments in 1/2 MOA increments. Sealed, waterproof adjusters are flush with the surface of the housing to prevent accidental movement or snagging, plus they are easily turned with a screwdriver or empty casing. Top mounted brightness control knob lets user select from eight different settings, including an exceptionally bright setting for full sunlight conditions and two that are compatible with night vision gear. Mid-position “OFF” al-lows user to quickly set the brightness level without cycling through all the settings. Waterproof sight has multi-coated, anti-reflective lenses and is nitrogen filled for fog-proof performance. The MRO is available with four mounting options: no base, low mount, lower 1/3 mount, or full co-witness mount. Mounts are also available sepa-rately to modify optic height to meet your specific needs. abSPECS: 7075-T6 aluminum, anodized, matte black. 2.6" (6.6cm) long, 1.7" (4.3 cm) wide, 2" (5.1cm) high w/o mount. 4.1 oz. (116.2g) wt. Waterproof to 100' (30.5m). Uses one CR2032 battery, included.

tRiJiCon

MRo™ MiniAtuRe RiFle optiCReduces Tube Effect For Better

Situational Awareness

#892-000-167At MRO Red Dot, 2H493P00 � � � � � � � � � $ 493.00#892-000-168At MRO w/Low Mount, 2H459Q99 � � � � 535.00#892-000-169At MRO w/Full Co-Witness Mount,

2H544G00 � � � � � � � � � � � � � � � � � � � � � � � 544.00#892-000-170At MRO w/Lower 1/3 Mnt, 2H544C00 � � 544.00#892-000-171At MRO Low Mnt Adapter, 2H50G00 � � 50.00#892-000-172At MRO Full Co-Witness Mount

Adapter, 2H60L00 � � � � � � � � � � � � � � � � 60.00#892-000-173At MRO Lower 1/3 Co-Witness Mount

Adapter, 2H60F00 � � � � � � � � � � � � � � � � 60.00

OP

TIC

S &

AC

CE

SSO

RIE

S

PAGE 274 Office/Tech: 641-623-5401SATISFACTION GUARANTEED

SINCE 1939

As tough as Trijicon’s legend-ary ACOG® scopes, the low-profile RMR™ (Ruggedized Miniature Re-flex) sight enables fast, both-eyes-open, target acquisition—even in

poor lighting conditions. Unlimited eye relief allows natural presen-tation from almost any shooting position, plus clear, unobstructed panoramic views for maximum situational awareness. Mount an RMR on your rifle to supplement your ACOG, and you’re ready to address targets at any range. Performs in the harshest operating conditions thanks to a computer-optimized geometric housing of high-strength, forged, military-grade, aluminum that absorbs shock and diverts stress away from the lens. Simple to operate, no switches to toggle, or forget to activate under stress, because the sight is always on. The True-Color 28-layer coated, non-magnifying lens delivers a crisp, clear shooting picture. Fully adjustable for windage and elevation, 1 MOA per audible click. Each RMR is pre-adjusted at the factory to be parallax-free at 50 meters. LED models run over 17,000 hours on one CR-2032 lithium battery (included) or up to 4 years in dark storage. Battery-free Dual-Illuminated - uses a combi-nation of powerful, light-gathering fiber optics and self-illuminating Tritium to project a bright amber dot on the sight in any light condi-tions from pitch darkness to broad daylight. Automatically adjusts brightness and contrast of reticle to ambient light. Adjustable LED - eight reticle brightness levels that can be set manually, or the user can select auto mode that automatically selects the brightness suit-able for ambient light conditions. abSPECS: 7075 T6 aluminum housing, hardcoat anodized, matte black. Acrylic lens. 1¾" (4.5cm) long, 11/8" (2.8cm) wide, 1" (2.5cm) high. 1.2 oz (34g) weight. Waterproof to 66 feet (20m). Carry case, CR-2032 battery (LED models), and instructions included; mounts sold separately, below.

from top of rail to bottom of sight. Fits Picatinny rails. RM33 - 1/4" (6.4mm) high. RM34 - 7/8" (2.2cm) high. RM44 - Steel, oxide coated, matte black. 9/64" (3.6mm) high. RM55 - Aluminum, hardcoat anodized matte black. Offset 45°.#892-000-057At RM33 Mount, 2H89M00 � � � � � � � � � � � � $ 89.00#892-000-058At RM34 Mount, 2H118J00 � � � � � � � � � � � � 118.00#892-000-084At RM44 Glock Pistol Mnt, 2H87E00 � � � 87.00#892-000-085At RM55 Rail Offset Adapter, 2H86P00 � � 86.00

RMR SIGHT MOUNTS - Strong, lightweight aluminum mounts provide a secure, solid platform for Trijicon’s RMR™ red dot sights. RM33 provides a low-profile mount on Pica-tinny rails; attaches to rail with a full-length locking bar and two recessed hex-head set-screws. RM34 offers Picatinny rail mount-ing with extra elevation; attaches to rail with a full-length locking bar and an easy-to-grasp, grooved, thumbscrew for fast attachment. Steel RM44 allows an RMR to be mounted on Glock pistols in place of the rear sight. Machined aluminum RM55 positions the RMR at a 45° angle, on the left or right side of a Picatinny rail. Mount behind your primary optic for fast transition from a magnified view to close-in sighting by rotating the rifle slightly. Locking bar and easy-to-grasp grooved thumbscrew ensure fast attachment.SPECS: Aluminum, hardcoat anodized matte black. Heights measured

tRiJiCon® RMR SightCompact, Ruggedized

Red Dot Sight System For Fast, Accurate Targeting

Dual-Illuminated

STOCK # MODELILLUM

SYSTEM RETICLE SIZE PRICE#892-000-050At RM01 LED 4 MOA Red 2H557Q00 $ 557.00#892-000-051At RM02 LED 6.5 MOA Red 2H557D00 $ 557.00#892-000-063At RM03 Dual 13 MOA Amber 2H491B00 $ 491.00#892-000-064At RM04 Dual 7 MOA Amber 2H491N00 $ 491.00#892-000-065At RM05 Dual 9 MOA Amber 2H491H00 $ 491.00#892-000-086At RM06 Adj. LED 3.25 MOA Red 2H602F00 $ 602.00#892-000-087At RM06-33* Adj. LED 3.25 MOA Red 2H691P00 $ 691.00#100-012-360At RM06-35** Adj. LED 3.25 MOA Red 2H691B00 $ 691.00#100-012-361At RM06-38*** Adj. LED 3.25 MOA Red 2H723K00 $ 723.00#892-000-088At RM07 Adj. LED 6.5 MOA Red 2H602E00 $ 602.00#892-000-089At RM07-33* Adj. LED 6.5 MOA Red 2H691M00 $ 691.00#892-000-095At RM08A Dual 12.9 MOA

Amber Triangle2H491L00 $ 491.00

#100-012-359At RM08G Dual 12.9 MOA Green Triangle

2H491D00 $ 491.00

*Includes RM33 Picatinny Mount.**Includes RM35 ACOG Mount.***Includes RM38 ACOG Mount.

RM55

RM55

These sights offer unlimited eye relief and a wide field of view, making them extremely versatile for sport, tactical, and hunting applications. Shock-resistant up to .50 caliber for reliable service on almost any firearm platform. Integral, Weaver-style base on all models gives rock-solid mounting and easy installation.

30mm RED DOT SIGHT - Rug-ged, waterproof and fog-proof sights sights feature a 5 MOA dot size for fast target acquisition, 11 brightness control settings, fingertip windage and eleva-tion adjustments, and lens cov-ers. Multi-coated lenses provide more than 95% light transmission for superior clarity and brightness. Traditional model features a sin-gle red-colored dot reticle. Dual Color offers the same dot reticle with selectable illumination in red or green for improved visibility in all light conditions. Both have 1 MOA click adjustments.SPECS: Aluminum body, black, matte finish. 3.75" (9.6cm) long x 2" (6.4cm) wide. 7.9 oz. wt. Includes instructions, lens covers, and CR2032 battery. 1X magnification x 30mm objective.#902-000-090At Traditional Red Dot, 2K45K02 � � � � � � � $ 46.99#902-000-105At Dual Color Red Dot, 2K56N71 � � � � � � � 59.99

MR/DC OPEN RED DOT SIGHT - Water- and shock-resistant sights feature a tubeless design for maxi-mum simplicity and minimal weight. Delivers maximum versatility with four different reticle settings: 10 MOA dot, 15 MOA peep, 3 MOA center dot, and standard crosshair. Offers dual-color, red or green il-lumination with five brightness set-tings in both colors. Precise 1 MOA click adjustments for windage and elevation. Special lens coatings completely eliminate double dot and split images.SPECS: Aluminum body, black, matte finish. 3.3" (8.4cm) long x 1.4" (3.5cm) wide. 4.1 oz. wt. 1X magnification, 34mm window. FOV - 74′at 100 yd. Includes instructions, lens cover, and CR2032 battery.#902-000-118At MR/DC Red Dot, 2K67N22 � � � � � � � � � � $ 69.99

tRuglo Red dot SightSFast Sight Pickup, Wide Field Of View

Traditional

Dual Color

Low-profile red dot sight pro-vides a versatile 3 MOA aiming point to promote fast target acquisition at a variety of ranges. Waterproof, shock-

resistant aluminum sight body encloses a fully multi-coated lens that offers a clean, wide field of view. Snag-free, power and dot intensity controls are mounted on the left side for easy access. Au-tomatic brightness control uses an ambient light sensor to adjust dot intensity. Fits Picatinny and Weaver rails. Topside battery access means you don't have to remove the sight from the gun and lose zero to change the battery. Automatic shutoff extends battery life. Comes with CR-1632 battery and T-15 Torx driver.SPECS: Aluminum, hardcoat anodized, matte black. 2" (51mm) OAL. 1.1 oz. (31.2g) wt. Adjustment range: 130 MOA windage/100 MOA elevation in 1 MOA increments.

VoRteX

VenoM ReFleX SightCompact Red Dot For Your

Tactical Rifle, Shotgun Or Pistol

#100-017-322At 3 MOA Venom Red Dot Sight, 3B229A99 � � � � � � � � � � � � � � � � � � � � � � � � $ 229.99

MepRolight

MepRo M21 ReFleX Sight

Ultra-bright light-gathering, fi-ber optics above the sight and below the lens plus a Tritium insert provide a crisp reticle in bright daylight or low light that’s easy to see for quick target acquisition. No batteries to fail

at the wrong time, no switches to break - the Mepro 21 is always on and ready to use. Plus, the bright reticle is easy to pick up under stress - available in a variety of different shapes. 30mm lens gives an excellent field of view and has a multi-layered coating to enhance light transmission. Dual-lever, quick-release mounting system pro-vides accurate return-to-zero on Picatinny rails. Ships directly from manufacturer� Please allow 10 additional business days for shipping�SPECS: Cast alloy housing, matte black. 41/2" (11.4cm) long, 11/2" (4.2cm) wide. 13 oz. (368 g) wt.

MX3 MAGNIFIER - Clamps onto the receiver rail behind the M21 sight with built-in QD Picatinny mount to provide 3x magnifica-tion for engaging longer-range targets. Wide field of view helps you get into firing position quickly. Does not require re-zeroing of M21. MIL-STD 810 qualified. Ships directly from manufacturer� Please allow 10 additional business days for ship-ping�SPECS: 5" (12.7cm) x 2.5" (6.4cm) x 4" (10.2cm). 16 oz. wt.#387-000-095At Mepro MX3 Magnifier, 2B00JGB � � � $ 530.00

Glowing Reticle Is Easy To See In All Light Conditions

#387-000-093At Mepro 21, Triangle, 2B00IBC � � � � � � � $ 524.25#387-000-091At Mepro 21, 4.3 MOA Dot, 2B00HJL � � 524.25#387-000-092At Mepro 21, 5.5 MOA Dot, 2B00FFS � � � 524.25#387-000-090At Mepro 21, Bullseye, 2B00NPS � � � � � � 524.25#387-000-094At Mepro 21, X-Reticle, 2B00BTH � � � � � 524.25

This tough, lightweight sight features a clear, crisp sight picture with a 3 MOA dot for close quar-ters and rapid fire shooting. Sight is water resistant and shockproof, and has two brightness levels that can be quickly adjusted with a three

position switch at the rear of the unit. The built-in mount fits any Weaver or Picatinny rail and the wide field of view and unlimited eye relief allow it to be mounted anywhere on the gun. Installs easily and can be used on handguns, rifles, or shotguns as the primary or as a secondary sight. Comes with instructions, adjustment tool, extra battery, and plastic lens cover.SPECS: Aluminum, anodized matte black. 2.4 oz. weight. Includes in-structions, tools. Lens cover, and extra battery. Mounts to Weaver and Picatinny rails.

SightMARK

Mini Shot ReFleX SightRugged, Reliable, Red Dot Sight

For Rapid Target Acquisition

#100-007-070At Mini Shot Reflex Sight, 8A72I45 � � � � � $ 79.99

Adapter base fits factory or after-market “iron” rear sight dovetails for easy mounting of a Docter or similar red dot sight with a hole pattern that fits a Docter base. No modifications to slide required. Adjustable hex-head screw ensures a secure lock in the dovetail; includes two hex-head cap screws to secure sight to base. Models available to fit Novak, Bo-Mar, or Glock factory rear sight dovetails. abSPECS: 7075 T6 aluminum, hardcoat anodized, black. Will not accept J-Point/Optima red dot sights.

egW

doCteR Red dot Sight MountReplaces Factory Rear Sight For Easy

Installation Of A Docter-Style Red Dot

#296-000-137At Novak Sight Mount, 6B43A48 � � � � � � � $ 49.95#296-000-135At Bo-Mar Sight Mount, 6B43M48 � � � � � 49.95#296-000-136At Glock Sight Mount, 6B43P48 � � � � � � � 49.95

Low-profile aluminum mount uses the factory rear sight dovetail to mount a Burris

FastFire or Docter red dot sight on the slide of your Springfield XD/XDM pistol. Easy-to-install, no gunsmithing required. Simply insert into the dovetail and tighten the two steel Allen head screws, front and rear, for a secure hold. Polymer-tipped Allen won’t mar the slide finish and help create a stable, balanced sight platform. Mount is contoured for a perfect fit to the sight body, also using two Allen head screws. One piece machined aluminum construction, hard-coat anodized for additional strength and long service life. abSPECS: Aluminum base, hardcoat anodized, matte black. Steel mount-ing screws. 1-13⁄16" (4.6cm) long, 1" (2.54cm) wide, .14" (3.6mm) high. Includes Allen head wrenches. Fits Burris FastFire and Docter red dot reflex sights. Available for Springfield XD/XDM. Does not fit pistols with 5.25" barrels and factory adjustable sights.

SpRingeR pReCiSion Xd/XdM

Red dot ReFleX Sight MountSecure, Stable Platform For Red Dot

Sights

#100-005-255At XD/XDM Reflex Sight Mount, 1B50E51 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 54.99

Gives the J.P. J-Point, and the old Tasco Optima and Fire Point sights, the lowest possible mount for fast eye alignment and sight pickup. No machining required; fits the factory dovetail. Four locat-ing studs lock sight to base. BM #1 fits slides cut for “melted-in” sight. S&W Revolver fits factory drilled and tapped guns. abSPECS: Aluminum, black anodized, matte finish.

Jp enteRpRiSeS

J-point MountMounts Sight Low For Fast

Alignment

STOCK # FITS PRICE#452-000-002At BM #1 2E36C03 $ 37.95#452-000-018At 1911 Auto w/fixed sight 2E36B03 $ 37.95#452-000-019At Glock all models 2E36N03 $ 37.95#452-000-004At S&W Revolver 2E45H04 $ 47.45#452-000-207At Smith & Wesson M&P 2E00BFD $ 37.95#452-000-208At Springfield XD 2E00EWR $ 37.95#452-000-021At Weaver/Picatinny 2E54K04 $ 56.95

RE

D D

OT

SIG

HT

S

OP

TIC

S & A

CC

ESSO

RIE

S

PAGE 275Orders/Tech: 800-741-0015order on the web

brownells.com

SCO

PE

AC

CE

SSOR

IES

Compact and lightweight, the “Speed Point Aiming for Rapid Com-bat” sight is ideal for the AR-15/M16 platform or tactical shotgun. Ma-chined from aircraft grade aluminum, the single-piece body is O-ring sealed and nitrogen purged for waterproof and fogproof performance. Fully multicoated lenses increases light transmission for vibrant colors and parallax-free shooting. Digital rear facing controls adjust the 2 MOA red aiming dot with 10-step adjustable brightness for operation in a wide range of lighting conditions. Click adjustable in 1 MOA increments for windage and elevation, with a 90 MOA maximum range of adjustment. Versatile multi-height mount system accommodates most firearms including AR-15s needing absolute or lower 1/3 co-witness heights, and mounts on standard Weaver or Picatinny rails. Includes front and rear flip-up dust covers plus one CR-2032 battery. SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Fully coated optics. 2 MOA red aiming dot. 22mm obj. dia. 3.1" (7.9cm) OAL. 5.9 oz. (167.3g) wt. Includes front and rear flip-up dust covers, one CR-2032 battery, and instructions. Fits MIL-STD 1913 Picatinny rails and Weaver-style bases.

VoRteX

SpARC ii Red dot SightGets Your AR-15/M16 Or Tactical

Shotgun On Target Fast

#100-014-334At SPARC II Red Dot Sight, 3B199I99 � � $ 199.99

Compact LED red dot sight provides fast, both-eyes-open sighting without concern for parallax – simply place the dot on the target, and pull the trigger for accurate short- to mid-range shots. The one-piece aluminum chassis is waterproof and shockproof to with-stand the recoil of pistols, rifles, and shotguns. Wide-Field glass lens that delivers excellent edge-to-edge brightness for an extremely clear sight picture. Ultra-hard, scratch-resistant coating protects the highly-polished, anti-reflective lens. High-intensity, unlimited-eye-relief center dot – available with a 3 MOA or 6 MOA dot – fea-tures 10 brightness-intensity settings that enable use in any lighting conditions. Comes with a built-in mount for MIL-STD 1913 Picatinny rail installation; handgun slide mounts sold separately below.SPECS: Aluminum, hardcoat anodized, matte black. 2" (5cm) OAL. 1" (2.5cm) wide. 1.3" (3.3cm) high w/ base. 2.4 oz. (68g) wt. 170 MOA el-evation adjustment range; 114 MOA windage adjustment range. 1 MOA click value. Includes CR-2032 battery, instructions, and protective cover.

HANDGUN MOUNTS - Strong yet lightweight ma-chined aluminum mounts replace the supplied Pica-tinny mount to allow installation of your Razor Red Dot scope on the slides of select handguns.

— Advise # — Razor Sight Handgun Mount, 3B19C99 � �$ 19.99

VoRteX

RAZoR Red dot Sight

#100-009-992At 3 MOA Razor Red Dot Sight, 3B399K99 � � � � � � � � � � � � � � � � � � � � � � � � $ 399.99

#100-009-994At 6 MOA Razor Red Dot Sight, 3B399Q99 � � � � � � � � � � � � � � � � � � � � � � � � 399.99

Clear, Compact & Accurate For Quick, Parallax-Free Target Acquisition

STOCK # FITS#100-010-184At Colt 1911 and

clones#100-010-188At Glock, all except

10mm & .45

STOCK # FITS#100-010-186At Glock, 10mm &

.45 only#100-010-190At Beretta 92

Improves accuracy by ensuring the rifle is level before each shot. Even the smallest amount of cant will move bullet strike 1/2 an inch or more at 100 yards: results in missed targets or wounded game. Attaches directly to a scope base, remains visible to your non-sighting eye so you can quickly check the level without moving your eye off the target. Fits Weaver-style base.SPECS: Aluminum, black, anodized finish. 1.8" (47mm) long.

B-SQuARe BuBBle leVelLevels The Rifle, Not The Scope

#122-100-600At Bubble Level, 6K14Q57 � � � � � � � � � � � � � �$ 15.99Gives an instant check to make sure the

gun is perfectly level before pulling the trigger, so every shot goes where it’s aimed. When a gun sighted in at 100 yards with the crosshairs level is canted just six degrees, point of impact

moves over 1/2". Not much, but enough to completely miss a small target—or wound a larger one. The problem gets worse at longer ranges. Clamp the ACD on the scope tube where it’s visible to the non-sighting eye. abSPECS: Aluminum. Black (Blk) or silver (Sil), anodized, matte finish. Avail-able for 1" or 30mm scopes.

Mounting SolutionS

Anti-CAnt deViCeStay On Target, Shot After Shot

#556-200-100At 1" Blk Anti-Cant Device, 1K25H74 � � � $ 29.95#556-200-101At 1" Sil Anti-Cant Device, 1K24I99 � � � � � 24.99#556-200-030At 30mm Blk Anti-Cant Device, 1K26B32 � � 28.99

Offset scope level helps position your crosshairs at a true level to reduce accuracy loss caused by holding your rifle at a slightly different angle, or cant, each time you pull the trig-ger. Designed to let you view the level while still behind the scope. Attaches to the scope tube like a scope ring. abSPECS: Aluminum, anodized, matte Black or natural Silver finish. Models available for scopes with 1" or 30mm O.D. tubes.

Helps Keep Your Crosshairs Level With Every Shot

#749-004-279At Scope Level (1" Rings), Blk, 8H00PCM � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 34.99

#749-004-540At Scope Level (30mm Rings), Blk, 8H00MLC � � � � � � � � � � � � � � � � � � � � � � � � � 34.99

Sinclair oFFSet SCope leVel

RE

D D

OT

SIGH

TS

This compact design lets you mount an RMR sight on any Picatinny rail with the ability to take it off and replace it quickly and easily, with no tools required. The QD lever is easily adjusted for tension and can be configured to lock to the front or to the rear. Available with lever on left- (LH) or right-hand (RH) side. The built-in clamp adjustment allows it to fit securely even on rails that are not quite “in spec”. abSPECS: 6061 T6 aluminum, hardcoat anodized matte black finish. 13/4”( 4.45 cm) length, 17/8" (4.76 cm) width, 7/16" (1.11 cm) height above rail. Fits Trijicon RMR sight only. Absolute Co-Witness Mount - 1.1" (2.8cm) high above rail. 2.3 oz. (65.2g) wt.

Quick Release Mount For Trijicon RMR Sight

#100-005-762At RMR Mount, RH Lever, 7B62M47 � � � � �$ 71.99#100-017-111At RMR Mount, LH Lever, 7B62N47 � � � � � � 71.99#100-017-112At RMR Mount w/Absolute Co-Witness,

7B65G87 � � � � � � � � � � � � � � � � � � � � � � � � � � � 74.99

AMeRiCAn deFenSe

Ad-RMR Mini Mount

The ACCU/LEVEL scope level attaches to the scope tube to help you correct “cant error” for a dead-on true verti-cal hold that improves accuracy, especially for long-range shots. On Hunter, Sniper, and Co-vert models, the bright,

fluorescent yellow bubble-level pivots out into the open position for immediate use and swings back over the top of the scope for storage.The Fixed ACCU/LEVEL is designed to be aligned with the gun during installation. Each unit accommodates both right- and left-handed shooters and is machined from advanced 6061 T6 air-craft aluminum for strength and hard anodized for protection from the elements. Models available to fit 1", 30mm, and 34mm scope tubes. Ring clamp holds tight with two stainless steel Allen head screws. Integral accessory dovetail accepts the Strong Arm Mount (below) for attaching a cosine indicator to your ACCU/LEVEL. abSPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 9/16" (1.5cm) long x 21/2" (6.3cm) wide (closed), 4" (10.2cm) wide (open).

FlAtline opS ACCu/leVel™Helps You Achieve

True Vertical Hold For Improved Accuracy

30mm Sniper

#100-006-834At 1" Hunter Accu/Level, 5C00HJF � � � � �$ 129.95#100-006-835At 30mm Sniper Accu/Level, 5C00BXN � � 139.95#100-006-836At 34mm Covert Accu/Level, 5C00DIL � � 169.95#100-011-952At 1" Fixed Accu/Level, 5C00LIJ � � � � � � � 74.99

STRONG ARM™ COSINE INDICATOR MOUNT - Secure, ma-chined aluminum mount slides onto the ac-cessory dove tail of the ACCU/LEVEL to allow mounting of a cosine indicator for an unob-structed view of uphill and downhill trajec-tory angles. Designed to accept Flatline Ops ACI/ADI or Sniper Tool Designs indicators. Secures to ACCU/LEVEL with two stainless steel screws. SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 9/16" (1.5cm) wide x 21/8" (5.3cm) high. Stainless steel mounting screws included.#100-006-837At Strong Arm Mount, 5C58G99 � � � � � � � $ 58.99

1" Fixed

1" Fixed 30mm Sniper

#100-011-953At 30mm Fixed Accu/Level, 5C00EAC � � 79.99#100-011-954At 34mm Fixed Accu/Level, 5C00GGR � $ 84.99

Compact bubble level instantly displays the amount of tilt or “cant” as you hold your rifle so you can make fast, easy corrections to improve accuracy. Clamps to any MIL-STD 1913 Picatinny rail and will accommodate both left- and right-hand shooters. Folds out-of-the-way when not in use, and a knurled alu-minum cover threads over sighting bubble to protect it. Protective cover threads onto opposite side for storage when not in use. abSPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. Green liquid. Rail Mount - 5/8" (1.6cm) long, 31/4" (8.3cm) wide open, 17/8" (4.8cm) wide folded, 1/2" (1.3cm) high. Ring Mount - 5/8" long, 4" (10.2cm) wide open, 211/16" (6.8cm) wide folded, 1/2" high. Fits 30mm optic tubes.

u.S. optiCS

BuBBle leVelHelps You Correct Weapon Cant For

Improved Accuracy

#100-005-427At Rail Mount Bubble Level, 5F104M50 � � � � � � � � � � � � � � � � � � � � � � � � $ 104.50

Convenient, easy-to-install angle degree indicator (ADI) pro-vides you with an instant, accurate upward or downward angle to your target. Calibrated in degrees, en-ter the information into Nightforce ballistic software or the pre-printed angle drop chart for incredible ac-curacy, no matter your perspective. Designed to attach to the ADI mount, which fits any MIL-STD 1913 base without removing your scope. Separate models for right-handed and left-handed shooters. Mount fits both right hand and left hand ADIs. abSPECS: ADI – black, 1.1" (2.8cm) O.D. Mount – 6061-T6 aluminum, matte black.

nightFoRCe

Angle degRee indiCAtoR & MountEliminates The Guesswork In

Uphill Or Downhill Shots

#524-000-207At Right-Hand Angle Degree Indicator w/Mount, 2E159I99 � � � � � � � � � � � � � � � �$ 159.99

#524-000-206At Left-Hand Angle Degree Indicator w/Mount, 2E159C99� � � � � � � � � � � � � � � � � � 159.99

#749-012-036At Right-Hand Angle Degree Indicator - Only, 2E121H00 � � � � � � � � � � � � � � � � � � � � 121.00

#524-000-205At Left-Hand Angle Degree Indicator - Only, 2E121H00 � � � � � � � � � � � � � � � � � � � � 121.00

#749-012-037At ADI Mount, 2E58B99 � � � � � � � � � � � � � � � 58.99

Dear Customer,

Rifle and pistol scopes have tradi-tionally appeared in this part of our Big Book. As we continue to refo-cus this catalog on the needs of our gunsmith customers, and since we are able to sell scopes, for the most part, only at retail prices - no Dealer Discount - we have decided to offer them solely through our website. We carry a broad selection of most of the name brands in optics there. You'll find just about any kind of scope you want at Brownells.com. Click on the Optics tab on the home page.

WheRe ARe the SCopeS?

OP

TIC

S &

AC

CE

SSO

RIE

S

PAGE 276 Office/Tech: 641-623-5401SATISFACTION GUARANTEED

SINCE 1939

SCO

PE

AC

CE

SSO

RIE

S

Machined aluminum throw lever attaches to the magnifica-tion ring of Vortex scopes and helps you rapidly change magnification with a simple flick of your wrist. Split-ring construction makes it easy to install and remove, and adjustment knob is skeletonized to save weight, and give unique appearance. abSPECS: SV-2 fits Razor HD with rubber mag. ring, and Viper PST, HS, HS-T, and HS LR models with metal mag. ring. Also fits XBR crossbow scope. SV-3 fits Razor HD Gen II with metal mag. ring.

VoRteX

SWitChVieW thRoW leVeRInstantly Change

Magnification Power

#100-014-706At SV-2, 3B59K99 � � � � � � � � � � � � � � � � � � � � $ 59.99#100-014-707At SV-3, 3B59E99 � � � � � � � � � � � � � � � � � � � � 59.99

Aluminum lever clamps around your scope’s magnification adjust-ment ring and provides the extra leverage needed to quickly change

magnification settings. Easy to operate on the run and perfect for three-gun competition—use scope at low setting for close targets and crank quickly to higher magnification for distant targets. Lever requires clearance between the scope body and base or receiver rail for proper operation; see individual specifications listed in the table below. abSPECS: 6061 T6 aluminum, hardcoat anodized, black. Levers extend approx. .880" (22.4mm) from the scope’s adjustment ring. Fits circular adjustment rings without index bump/knob.

MgM tARgetS

SWitChVieW leVeR

STOCK # FITSMIN.

CLEARANCE PRICE#100-005-212At Burris E1; Nightforce

NXS full size; Swarovski Z5; Vortex Viper PST/HS w/rub-ber mag ring

.256" (6.5mm)

1C57Q59 $ 59.95

#100-005-213At Burris XTR .260" (6.5mm)

1C57D59 $ 59.95

#100-053-505At Bushnell HDMR & Elite Tactical XRS; Burris M-TAC 1-6x

.125" (3.2mm)

1C57Q59 $ 59.95

#100-053-502At Leupold CQ-T .265" (6.7mm)

1C57A59 $ 59.95

#100-053-500At Leupold Mark AR & VX-II

.200" (5.1mm)

1C57M59 $ 59.95

#100-005-214At Leupold VX-3 & Mark IV non-illuminated reticle

.225" (5.7mm)

1C57E59 $ 59.95

#100-053-501At Nightforce NXS Compact only

.210" (5.3mm)

1C57J59 $ 59.95

#100-053-503At Schmidt & Bender Short Dot, Zeiss Com-pact Victory

.256" (6.5mm)

1C57H59 $ 59.95

#100-053-506At Vortex Razor HD Gen II w/metal mag ring

.125" (3.2mm)

1C57J59 $ 59.95

Enables Fast & Easy Changes In Scope Magnification Setting

Weatherproof, dust-proof, moisture-proof scope covers protect your scope’s lenses from being damaged during tactical and hunting situ-ations. Spring activated covers pop open with a touch of your thumb, and the easy-to-find but-tons provide quick access to your scope. Eye Piece and Objective covers sold separately.

SPECS: Polycarbonate, black, matte, finish. Se-lect the cover that most closely matches the diameters of the eye and objective bells within .01" (.25mm) undersize and .025 (.64mm) over-size. #15 eye fits Redfield Widefield eyepiece.

STOCK # DIA. (IN./CM) SIZE PRICE#120-000-046AS 1.998" (50.7) 31 7K8E91 $ 9.99#120-000-030AS 2.043" (51.9) 33 7K8A91 $ 9.99#120-000-026AS 2.100" (53.3) 34 7K8A91 $ 9.99#120-000-044AS 2.220" (56.4) 39 7K8I91 $ 9.99#120-000-029AS 2.250" (57.2) 40 7K8E91 $ 9.99#120-000-020AS 2.310" (58.7) 43 7K8I91 $ 9.99#749-001-526AS 2.360" (59.9) 44 7K8H91 $ 9.99#749-001-461AS 2.410" (61.2) 45 7K8G91 $ 9.99#120-000-028AS 2.430" (61.7) 46 7K8P91 $ 9.99#749-001-494AS 2.461" (62.5) 47 7K8E91 $ 9.99#749-001-503AS 2.500" (63.5) 48 7K8A91 $ 9.99#749-001-527AS 2.575" (65.4) 51 7K8K91 $ 9.99

eYe pieCe CoVeRS

STOCK # DIA. (IN./MM) SIZE PRICE#749-001-439AS 1.225 02 7K8H91 $ 9.99#749-001-440AS 1.300" (33.0) 03A 7K8C91 $ 9.99#120-000-039AS 1.341" (34.1) 01 7K8M91 $ 9.99#120-000-040AS 1.388" (35.3) 03 7K8J91 $ 9.99#120-000-041AS 1.432" (36.4) 05 7K8J91 $ 9.99#593-000-156AS 1.457" (37.0) 07 7K8G91 $ 9.99#120-000-038AS 1.468" (37.3) 09 7K8I91 $ 9.99#120-000-023AS 1.485" (37.7) 09A 7K8J91 $ 9.99#120-000-012AS 1.516" (38.5) 10 7K8A91 $ 9.99#120-000-011AS 1.550" (39.4) 11 7K8K91 $ 9.99#120-000-014AS 1.570" (39.9) 13 7K8N91 $ 9.99#120-000-015AS 1.605" (40.8) 14 7K8J91 $ 9.99#120-000-037AS 1.66"x1.45" (42.2x36.8) 15 7K8F91 $ 9.99#120-000-013AS 1.660" (42.2) 16 7K8J91 $ 9.99#120-000-016AS 1.675 (42.5) 17 7K8H91 $ 9.99#120-000-017AS 1.700" (43.2) 18 7K8L91 $ 9.99#120-000-025AS 1.730" (43.9) 19 7K8H91 $ 9.99#120-000-024AS 1.775" (45.1) 20 7K8F91 $ 9.99

oBJeCtiVe CoVeRS

STOCK # DIA. (IN./CM) SIZE PRICE#120-000-048AS 1.00" (25.4) 01 7K8C91 $ 9.99#749-001-422AS 1.095" (27.8) 04 7K8H91 $ 9.99#120-000-056AS 1.225" (31.0) 02 7K8E91 $ 9.99#749-001-481AS 1.300" (33.0) 03A 7K8A91 $ 9.99#749-001-471AS 1.340" (34.0) 03 7K8B91 $ 9.99#749-001-423AS 1.387" (35.2) 05 7K8L91 $ 9.99#749-001-443AS 1.429" (36.3) 07 7K8F91 $ 9.99#120-000-053AS 1.485" (37.7) 09 7K8J91 $ 9.99#120-000-045AS 1.500" (38.1) 10 7K8K91 $ 9.99#749-001-435AS 1.54"x1.34" (39.1x34.0) 11 7K8L91 $ 9.99#120-000-042AS 1.530" (38.9) 13 7K8E91 $ 9.99#120-000-027AS 1.558" (39.6) 15 7K8N91 $ 9.99#120-000-054AS 1.612" (40.9) 17 7K8L91 $ 9.99#120-000-049AS 1.646" (41.8) 19 7K8M91 $ 9.99#120-000-055AS 1.700" (43.2) 20 7K8H91 $ 9.99#120-000-052AS 1.735" (44.1) 21 7K8A91 $ 9.99#120-000-051AS 1.760" (44.7) 23 7K8K91 $ 9.99#120-000-043AS 1.800" (45.7) 25 7K8I91 $ 9.99#120-000-018AS 1.820" (46.2) 26 7K8P91 $ 9.99#120-000-019AS 1.840" (46.7) 27 7K8I91 $ 9.99#120-000-021AS 1.890" (48.0) 28 7K8G91 $ 9.99#120-000-047AS 1.919" (48.7) 29 7K8K91 $ 9.99#120-000-022AS 1.960" (49.8) 30 7K8F91 $ 9.99

ButleR CReeK

Flip open SCope CoVeRSKeeps Harmful Debris From Scratching

Or Abusing Lenses

To order scope covers, it is best if you pre-measure your objective and your eyepiece prior to ordering. Use a caliper to measure the outside diameter of your scope’s objec-tive and eyepiece to within .001". Using the sizing chart, select a cover that is within a range of .01" less than your measurement to .025" larger than your measurement. If you don’t feel comfortable doing this, please have the scope manufacturer and the specific model ready for the sales rep.

oBJeCtiVe CoVeRS (Con’t)

Nylon-faced, stretchy neoprene rubber cushions any rifle or pistol scope

from everyday bumps, scratches, dings, moisture, and dust. Snaps on and off quickly without using rubber bands, clips, or strings. abSPECS: Rubber, nylon facing, 2mm thick, black or brown camo. Order by size; recommended fit is either “relaxed same length” or slightly stretched.

XP-6 FLAK JACKET SCOPECOAT - Three times thicker (6mm) than the standard Scopecoat; gives extra protection for scopes with tall adjustment turrets. Black only.

STOCK # DESCRIPTION SIZE PRICE#268-106-004At Large 121/2" x 42mm 8F23I40 $ 29.99#268-106-005At Large 50 121/2" x 50mm 8F23I40 $ 29.99#100-002-615At Large 1452 14" x 52mm 8F23B40 $ 29.99#268-106-006At X-Large 151/2" x 60mm 8F23G40 $ 29.99#268-106-001At XX-Large 171/2" x 60mm 8F31P21 $ 39.99#268-000-006At Leupold CQ/T NA 8F23H40 $ 29.99#268-000-024At ACOG TA01 w/RMR

or Docter Reflex Sight

6" x 60mm 8F23Q40 $ 29.99

deVtRon

SCopeCoAt® pRoteCtiVe CoVeRCushion Your Optic From Dings,

Bumps & Damage

— Advise # — Scopecoat, 8F15C59 � � � � � � � � � � � � � � � � � � �$ 19.99

STK# BLACK STK# CAMO SIZE#268-101-001At nA Mini - 53/4" x 20mm#268-101-002At nA Small - 81/2" x 20mm#268-101-003At nA Medium - 101/2" x 30mm#268-101-004At #268-102-004At Large - 121/2" x 42mm#268-101-005At nA Large 50 - 121/2" x 50mm#268-000-014At nA Large 52 - 14" x 52mm#268-101-006At nA X-Large - 151/2" x 60mm#268-000-001At nA Trijicon Reflex/C-More Serendipty#268-000-017At nA Trijicon ACOG TA01NSN#268-000-025At nA Trijicon ACOG TA648#268-000-026At nA Trijicon RMR#268-000-013At nA EOTech 511#268-000-018At nA EOTech 516, 553#268-000-019At nA EOTech 517, 557#268-000-016At nA EOTech 552#268-000-027At nA EOTech 552 or 553 w/3x Mag Combo#268-000-029At nA EOTech 557 w/3x Mag#268-000-028At nA EOTech 557 w/4x Mag#268-000-022At nA EOTech XPS 2/3

#268-000-020At nA Aimpoint Micro#268-000-021At nA Aimpoint CompM2/M3

Soft rubber cover protects an Aimpoint Micro red dot sight from impact, dust, and dirt. In-tegral lens caps flip open with a swipe of the hand. Once open, they won’t block the sight picture under recoil or movement. Tough thermoplastic is abrasion- and tear-resis-tant, while unaffected by oil, fuel, solvents, temperature extremes, and UV radiation. Accepts most spray paints and water dip coatings for camouflage or other markings.SPECS: Molded soft thermoplastic, Black, Flat Dark Earth (FDE), Foliage Green, or O.D. Green. Fits Aimpoint Micro T-1, H-1, and R-1.

tAngodoWn

io CoVeR FoR AiMpoint MiCRoWrap-Around 360°

Protection For Your Optic

#100-011-867At Aimpoint Cover, Black, 9B24L99 � � � � � $ 24.99#100-012-521At Aimpoint Cover, FDE, 9B27I99 � � � � � � 27.99#100-012-523At Aimpoint Cover, O.D. Green,

9B27M99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 27.99

Spring-loaded, flip-open scope covers al-low fast, thru-thescope sighting for quick shots. Impact resistant, polymer lenses keep your scope lens dry, clear and ready during inclem-ent weather.

SPECS: Black, flexible plastic housing, clear polymer lenses. Measure O.D. of scope lens housing, match to sizes shown in chart that fit either the oc-ular or objective end of the scope. Includes stick-on, silencer foam block.

ButleR CReeK

BliZZARd SCope CoVeRClear, See-Thru Caps Flip Open

With Just A Touch

STOCK # SIZE O.D. RANGE#120-250-001At #1 1.0" - 1.05"#120-250-002At #2 1.3" - 1.39"#120-250-003At #3 1.4" - 1.49"#120-250-004At #4 1.5" - 1.59"#120-250-005At #5 1.6" - 1.69"#120-250-006At #6 1.7" - 1.79"

— Advise # — Blizzard Scope Cover, 7K8J30 � � � � � � � � � � �$ 8.99

STOCK # SIZE O.D. RANGE#120-250-007At #7 1.8" - 1.89"#120-250-008At #8 1.9" - 1.99"#120-250-009At #9 2.0" - 2.1"#120-250-010At #10 2.3" - 2.4"#120-250-011At #11 2.43" - 2.5"

Ring cap bubble level replaces the top half of Nightforce UniMount, Direct Mount, and standard rings to counter-act accuracy problems arising from rifle canting. Available as top half of ring and level only, or with top half of ring, level, and integral Angle Degree Indicator (ADI) mount. Works for both right- and left-hand applications. ab

SPECS: 7075-T6 anodized aluminum, matte black. 30mm diameter.

nightFoRCe Ring CAp BuBBle leVelSEnsure Level & Increase Accuracy

#749-012-034At Top Ring Bubble Level, 30mm 4 Screw, 2E00BXJ � � � � � � � � � � � � � � � � � � � $ 73.00

#749-012-035At Top Ring Bubble Level & ADI Mount, 30mm 4 Screw, 2E00MMA � � � � � � � � � � 97.00

#749-013-834At Top Ring Bubble Level, 34mm 4 Screw, 2E00LPL � � � � � � � � � � � � � � � � � � � � 78.00

#749-013-835At Top Ring Bubble Level & ADI Mount, 30mm 4 Screw, 2E00KUI � � � � � � � � � � � 102.00

#749-013-836At Top Ring Bubble Level, 34mm 6 Screw, 2E00AUA � � � � � � � � � � � � � � � � � � � 82.00

#749-013-837At Top Ring Bubble Level & ADI Mount, 34mm 6 Screw, 2E00PDE � � � � � � � � � � � 107.00

749-012-035

Orders/Tech: 800-741-0015

THE VX®-3I LRP PUTS LONG-RANGE PRECISION IN REACH.

Punching paper at 100 yards gets old. Push your limits and extend your reach with a VX-3i Long Range Precision riflescope. Do it on your terms: choose from first or second focal plane reticles, MOA or MIL adjustments, removable throw lever, and more. And with outstanding glass, rock-solid tracking, and new elevation turret with travel indicator and Zero Stop, it has everything a long-range shooter needs, nothing you don’t. Because it’s a Leupold®, your VX-3i LRP is guaranteed for life.

See what else sets the VX-3i LRP apart at Leupold.com.

© 2017 Leupold+Stevens, Inc.

LEUPOLD | AMERICAN TO THE CORE

LEUPOLD FULL LIFETIME GUARANTEE