6l80/6l90 center support stabilizer tool kit autel maxisys

34 GEARS June 2021

SUPERIOR TRANSMISSION PARTS, INC. 1-800-451-3115 • www.superiortransmission.com

STL009 Sure-Cool® Cooler Flow Control ValveThe NEW STL009 Sure-Cool® Cooler Flow Control Valve for Ford 6R60/6R75/6R80 units;fits all 6R60 Explorer, 6R75 Expedition/Navigator, 6R80 Mustang/F150 2006-2016

• Full time cooler flow with much lower average fluid temperature

• Built in high pressure safety bypass into the lube circuit

• Immediate and accurate fluid level check without warm-up cycle, which saves tech time for re-racking and rechecking. (45 min. average)

• Easy install, drop in replacement…can be done in-car when servicing the valve body.

AUTEL • 1-855-288-3587 • WWW.AUTEL.COM Email: [email protected] • Follow Us @AutelTools

Autel MaxiSYS MS909 Diagnostic TabletThe Autel MaxiSYS MS909 is a 9.7" touchscreen tablet with Android 7.0 OS with 128GB memory and powerful octa-core processor. It includes an advanced MaxiFlash VCI supporting the latest DoIP, D-PDU and Mega CAN vehicle communication protocols. Intelligent Diagnostics guides the technician from code to repair with detailed illustrations and information. The MS909 offers color-coded topology module mapping, security gateway access, enhanced PreSCAN & PostSCAN diagnostic reports, and camera-based barcode or text recognition with ScanVIN. A rechargeable 15,000mAh battery provides 8 hours of continuous use. Also included with the MS909 is a FREE 1-year software subscription, and FREE 1-year warranty.

SEALAFTERMARKETPRODUCTS.COM (800) 582-2760 • (954) 364-2400

6L80/6L90 Center Support Stabilizer Tool KitSeal Aftermarket Products announces an innovative repair solution for the 6L80/6L90 Center Support.

The new patent pending 6L80 6L90 Center Support Stabilizer Tool Kit resolves several issues relating to the OE Design.

The Stabilizer Kit will eliminate rotational movement of the center support in high torque applications and on those parts where the center support alignment lugs (6 in total) show wear.

WWW.SONNAX.COM | 2 Imtec Lane, Bellows Falls, VT 05101 800-843-2600 | 802-463-9722 | [email protected]

Sonnax GM 4L60/65/70-E Vacuum Test Plate KitAn ideal tool for fast, easy vacuum testing in GM 4L60-E, 4L65-E and 4L70-E units, Sonnax vacuum test plate kit #77754-VTP seals over the entire valve body casting to seal all the critical valve body passages at once. Strategically located test ports and exhaust holes allow all key casting areas to be vacuum tested quickly by just moving the vacuum test tip.• Clear test plate and silicone pad seal casting

for quick, easy testing• Open ports at key areas identify

recommended test locations• Easy-to-follow instruction booklet identifies ports, valves,

symptoms of wear and the right Sonnax parts for repairLearn more at www.sonnax.com.

1shop-tools-equip 0621.indd 341shop-tools-equip 0621.indd 34 5/28/2021 12:01:505/28/2021 12:01:50

GEARS June 2021 35

TRANSTAR INDUSTRIES TEL: 844-312-6136 • WWW.TRANSEND.US

RAP2 KitIn the expanding world of required programming, the RAP2Kit is the best solution. Schedule a remote programming appointment, plug it in, and we handle the rest. The RAP2Kit includes the ability to program European vehicles, 4G modem for fast wireless internet access as new apps are added, windows tablet PC with a faster processor and greater overall capacity, extra hard drive to allow for future expansion as new apps are added, and a free subscription to Diagnostic Network. Applications currently supported include Chrysler, Ford, GM, Honda/Acura, Mercedes Benz, BMW, Hyundai, Kia, Nissan/Infiniti, and Toyota/Lexus/Scion. The kit itself is free, and each programming event is just $125 ($190 for FCA vehicles). Module calibration checks are just $40 each ($50 for FCA vehicles).

WWW.BUSHINGFIX.COM CONTACT: Carol Baker, 863-644-1216 • email: [email protected]

BushingFix.com® - SHOP SET Assorted Replacement Bushings™

"REPLACE THE BUSHING...NOT THE CABLE!"

* Our SHOP SET contains a selection of 23 custom molded bushing kits.

* Each kit provides instructions, replacement bushing, and patented installation tool.

* Includes an easy to follow fitment catalogue per year, make, model.

* Saving you time while making you money!* Our bushings fit 90% of vehicles on the road today!* New offerings to fit manual transmissions and transfer cases.*LIFETIME WARRANTY!

Call US: 863-644-1216

6L80-E Pump Alignment Clamp

CONTACT: Michael Tilley — ARIZONA TRANSMISSION MACHINE INC. (602) 992-2961 • E-MAIL: [email protected]

6L80-E pump alignment clamp made in the USA from 6061 T-6 Aluminum. The clamp is precision-machined to mate with the pump body (bell-housing) and stator support for proper alignment of both parts during reassembly. The ATSG service manual says pump alignment on this unit is critical. Clamp comes in a cardboard storage box.

CONTACT: Noriko Anderson - International Lubricants Inc. TEL: 206-762-5343 x16 • FAX: 206-762-7989

LUBEGARD® Assemblee Goo™ Green (P/N 19250) is now formulated with LXE-XP™, a new concentrated anti-wear molecule developed by International Lubricants, Inc. (ILI).

The new and improved Assemblee Goo with LXE-XP is the only kind of assembly gel that is formulated with anti-wear and provides protections to metal surfaces during initial startup.

Blue Assemblee Goo (P/N 19260) will have this newly invented technology incorporated into the formula this summer. Assemblee Goo helps facilitate the assembly process by holding components such as needle bearings and hydraulic seals in place. For more information, go to www.Lubegard.com.

New and Improved LUBEGARD Assemblee Goo with LXE-XP™ Technology

CONTACT: Dennis Wight - Power Pusher, Div. of Nu-Star, Inc. [email protected] • 630-561-2467 • www.powerpusher.com

The Automotive PowerPusher™ is a battery-powered, heavy-duty, multi-use tug designed to efficiently move immobilized vehicles and help reduce the risk of injury. It can push or pull almost anything on wheels and can maneuver inoperable vehicles up to 18,000 lbs. with only two people, instead of five or six normally required to move them. • Variable Speed – Soft Touch Control• Capacity up to 18,000 lbs. up a 5% grade• Automatic braking and Anti-Runaway• Zero emissions, great for indoor

and outdoor use• Ready when you are with its built-in battery

charger – plug into a 115V outlet when the unit is not in use

• Durable, mobile, fits through most standard doorways and easily stored

• The most efficient tool a service department or fleet can employ, it is a working member of the team requiring little maintenance

• Increases productivity and reduces direct labor cost, getting the job done in less time with less people

Automotive Power Pusher™ TransGo - 8L90-PDP-TKC

www.TransGo.com

Easily repair worn 8L45/8L90 pulse dampener bores with TransGo pulse dampeners (accumulators) and tool kit. Even a little wear has an effect on solenoid pressure to the controlling clutch regulator valves. 2-3 up-shift flare, harsh or erratic shifts, delayed reverse, TCC shudder that is still

present after a flush and refill with Mobile 1 LV ATF HP Fluid and clunk-on-coast downshifts all are a result of worn pulse dampener (accumulator) bores.

The TransGo Pulse Dampener Tool Kit (PART# 8L90-PDP-TKC) includes USA-made carbide

reamer, guide plate, four aluminum washers, two bolts with butterfly nuts, and a pulse

dampener pocket guide pin. The oversized pulse dampeners (accumulators) are sold separately (PART#

8L90-PDP-OS) and include matching calibrated springs to maintain the same function as OE and repair higher mileage units with extreme bore wear.


36 GEARS June 2021


Our award-winning application guide for automatic transmissions is back and better than ever! We make it easy to find OEM fluid listings, transmission type, total fill, and refill capacities, as well as low-cost OEM fluid alternatives, whole fluid solutions and protectants. We have expanded the chart to include, CVT and wet clutch DCT applications in our FREE, easy to use guide!

Download your free copy today at www.Lubegard.com/conversion or email: [email protected] to request your free copy.

BRAND NEW 13th Edition LUBEGARD OEM ATF & Conversion Chart

For more Adapt-A-Case tools visit WWW.ADAPTACASE.COM

Universal Transfer Case HolderAdapt-A-Case Universal Transfer Case Holder

This bench mount universal transfer case holder allows you to position the clamps to fit any transfer case. The special key shaped piece spins inside the bench receiver in 90 degree turns to safely access any side of the transfer case.

T-0156TCAC

CONTACT: Garrett Herning • [email protected] TEL: 262-563-1048 • Hydra-Test USA (www.hydratest.us)

Hydra-Test VBT DeluxeThe Hydra-Test VBT Deluxe is the ultimate in valve body testing. Using our latest HTC-S controller for data acquisition and solenoid control gives you precise test readings and an easy-to-read graphical display of each shift and gear commanded. Our intuitive test script editor allows the user to modify or create your own test scripts giving the end customer complete control over testing. With our continuous test plate development, we have support for the latest 6, 8, and 10 speed valve bodies. New test plates are available for the Ford 10R80-140, Allison 10L1000, and GM 8L45-90.

SC-25-SS Solvent Parts Washer with SC-100 StillClean Recycler

CONTACT: Jim Odom - STILLCLEAN.COM 800-628-7657 • E-MAIL: [email protected]

• 14-Gauge 304 Stainless Steel Construction.• 25-Gallon Solvent Capacity.• Use as a stand-alone parts washer or with the StillClean

Recycling System• Recycles 1-gallon per hour of solvents

with flash points between 105-170F.• Match this one to one or rotate a

StillClean from one washer to next in seconds, making all of your washers recyclers!

• Clean solvent every day of the week saves time and money.

• Reduce or eliminate hazardous waste and permit fees.

• Save money by eliminating service contracts and solvent purchases.

SUPERIOR TRANSMISSION PARTS, INC. 1-800-451-3115 • www.superiortransmission.com

The secret to the patented Bench Buddy® and the patented Accumulator Buddy® bore brush sets are the bristles. The super fine abrasive is locked into every nylon bristle using a proprietary extrusion process that utilizes high heat and pressure to blend and form the bristles.

Ease of use, simply insert the twisted stainless steel wire shaft into a drill and pull the trigger to quickly and efficiently clear, clean, smooth or polish blind bores, holes, gaps, tubes and virtually any hard to reach bore / surface in seconds – with virtually no change in specs. Leaving a deglazed, cleaned and polished concentric surface.

Now you can SEE why the Bench Buddy Line of bore cleaning brushes really are “THE MECHANICS BEST FRIEND”™

Bench Buddy® and Accumulator Buddy®

WHATEVER IT TAKES TRANSMISSION PARTS, INC.1-800-940-0197 • [email protected] • WWW.WITTRANS.COM

Part # T-STPR-MTR-ADV

• Fits All Nissan CVT Units

• Compact Carrying Case

• Plugs Into Standard Outlet

• Includes Harness For Stepper Motor

• Drives Stepper Motor to Ensure Functionality

CVT Stepper Motor Tester


GEARS June 2021 37


6L80/6L90 3-5/Reverse Drum Check ToolPart # T45555-Leak

6L80/6L90 3-5/Reverse Drum Check Tool

Used to Air Check The Drum For Leaks

Made From Billet Aluminum and Includes a Set Of Replacement Sealing Rings.

CHOSEN PAYMENTS DEJAVOO Z11 CONTACTLESS TERMINAL

CONTACT: Rick Brodsly - STILLCLEAN.COM 855-910-1445 • www.chosenpayments.com

Features:• EMV and NFC Contactless Built In

EMV 4.x L1 and L2 certified• Standard Dual Comm• 3.5” TFT LCD with

PCT touch screen for signature• 2.4’’ Color LCD with backlight• 192 MB of Memory

(128 MB RAM / 64 MB DDR RAM)• PCI PTS certified• Apple Pay, Samsung Pay, Google Wallet, Visa payWave,

MasterCard PayPass• Display logo on the screen and print logo

on the transaction receipts• Scroll multiple images on the terminal display when in idle mode• Great solution for SPIn integration to POS systems• 32bits 400MHz high speed microprocessor

For other life changing tools and fixes check out WWW.ADAPTACASE.COM

Pressure Checker & Bearing InstallerAdapt-A-Case Pressure Checker & Bearing Installer Tool For the 6L80 & 6L90 12-3-4/3-5 Reverse Drum

This mulit-functional tool tests the pressure of the 6L80/90 1-2-3-4/3-5 reverse drum to ensure there are no cracks or leaks throughout it. Simply place the tool in the drum and use an air gun in each hole to check for leaks. It also installs the bearing to the proper depth by placing the bearing on the tool and setting it on the tapping into place.

T-135PRBRAC


Sonnax Vacuum Test Stand KitVacuum testing is an efficient, cost-effective way to accurately evaluate valve/bore wear and confirm repairs, but you need the proper equipment for reliable results. The award-winning Sonnax vacuum test stand kit (#VACTEST-01K) takes the hassle out of building and calibrating a homemade kit, allowing you to start successfully diagnosing problem valve bodies quickly and easily. Each high-quality kit includes a test stand, accessories and easy-to-follow instructions to start your next rebuild right. Learn more at www.sonnax.com/vacuum_testing.

AUTEL • 1-855-288-3587 • WWW.AUTEL.COM Email: [email protected] • Follow Us @AutelTools

Autel MaxiSYS ULTRA Advanced Diagnostic TabletThe MaxiSYS Ultra is Autel’s most ambitious diagnostics tablet to date, featuring a 12.9" touchscreen, Android 7.0 OS, and 256GB memory. It includes the MaxiFlash VCMI, 5-in-1 wireless communication and testing tool, supporting the latest DoIP, D-PDU and Mega CAN protocols. The VCMI also functions as a 4-channel oscilloscope, waveform generator, multimeter, and CanBUS tester. Intelligent Diagnostics guide the technician from code to repair with detailed illustrations and information. The Ultra offers color-coded topology module mapping, security gateway access, and split screen multi-application function. Also included is a docking station, FREE 1-year software subscription, and FREE 1-year warranty.

TransGo - 6T-PDP-TKC

www.TransGo.com

Repair worn pulse dampener (accumulator) bores across all GM FWD 6-SPD valve bodies with just one tool kit. The function of a solenoid pulse dampener (accumulator) is to dampen pressure irregularities within a hydraulic circuit. Over time, as a result of constant oscillation, dampener bores will wear, creating circuit leaks manifesting as driveability complaints such as harsh, flared and erratic shifts. TransGo developed one universal toolkit (PART# 6T-PDP-TKC) that will work with all GM 6-SPD FWD series and generations eliminating the need to purchase a new valve body casting. This Universal Pulse Dampener Tool Kit fits 6T30, 6T40, 6T45, 6T50 6T70, 6T75, 6T80 and includes USA made carbide reamer, guide plate, four washers, two bolts with butterfly nuts and pulse dampener pocket guide pin. Pulse dampeners (accumulators) are sold separately and include heat treated steel pulse dampener pistons (accumulators) and new springs calibrated to retain OE function. (PART# 6T40-PDP-OS and PART# 6T70-PDP-OS)


38 GEARS June 2021

Look for more fixtures to come at WWW.ADAPTACASE.COM

Universal GM Rear Wheel Drive Holding FixtureAdapt-A-Case

Universal GM Rear Wheel Drive Holding Fixture.

The T-48909AC fixture

attaches to rear drive

GM transmissions,

excluding Allison.

This fixture requires

a 1.5" receiver and yoke

from the Adapt-A-Case T-0156TCAC.

T-48909AC


The Sonnax tool shop is an award-winning online tool that helps you get the Sonnax tools you want, when you want them, at a fair price. The tool shop includes 70+ popular F-tool and vacuum testing products with new, lower MSRPs and greater distribution for faster delivery.

• MSRP: The price you see is the price you pay at all participating distributors

• Delivery: 1-2 Day delivery anywhere in the U.S. or Canada

With this helpful online tool, it’s easier than ever to expand or refresh your collection of reaming, bore-sizing and vacuum test tools. Learn more at www.sonnax.com/tool_shop.

Sonnax Tool Shop


Part # Arbor Press

RATCHETING ARBOR PRESS WITH 8" X 18" BASE

3 TON PRESSURE

Arbor Press


LUBEGARD PLATINUM® ATF Protectant (P/N 63010) with proprietary anti-wear additive and friction modifiers eliminates TCC shudder and reduces slippage in GM 8L45 & 8L90 transmissions.

LUBEGARD PLATINUM® can be added to the existing ATF, or at the time of fluid change. Use two 10-oz bottles per unit for GM 8L45 & 8L90 transmissions and allow up to 200 driving miles to see the full results.

A third-party test shows that LUBEGARD PLATINUM® tightens shifting cycle by 50% and significantly improves anti-wear protection of new and used fluid. For more information, visit www.Lubegard.com.

GM 8-Speed TCC Shudder Solution

CONTACT: Garrett Herning • [email protected] TEL: 262-563-1048 • Hydra-Test USA (www.hydratest.us)

Hydra-Torque Torque Converter WelderIntelligent design from Hydra-Test’s Hydra-Torque division is key for the WS 3.2 torque converter welding machine.Welding machine features include:• A dual chuck mounting system for quick and accurate

torque converter mounting• An upper Set-tru chuck to minimize runout• A modern touchscreen and manual buttons for

machine control• Internal stainless-steel panels for durability• Exhaust ventilation fan• An easy pull-down front cover to guard the operator

when welding• Our patent pending Accuturn rotational system for

precise and quick control Available in standard and heavy-duty models and as single or dual welding gun configurations.

EZ-DRIVER® Universal Multi-Purpose Driver/Installer

CONTACT: Michael Tilley — ARIZONA TRANSMISSION MACHINE INC. (602) 992-2961 • E-MAIL: [email protected]

ACCURATE: Allows precise positioning of components. • CONFIGURABLE: Can be used with hand tools or in a press. • CONVENIENT: All tools packaged in one carrying case that can be brought to any work site. • FAST: Distributes force evenly eliminating ‘rocking’ parts into place. • MULTI-PURPOSE: Great for use on tapered roller bearings, ball bearings, gears, seals and sleeves, and more.

The universal bearing installation system used in ATRA’s webinar training series features:


6l80/6l90 center support stabilizer tool kit autel maxisys

Documents