66592076-sft2841-download-and-installation-instructions-v10-4.pdf

NOTE: If you have a previous version of SFT2841 installed on your PC, it must be

removed using Windows Control Panel.

SFT2841 is a large file and is broken down into nine smaller files to facilitate successful

downloads.

A- DOWNLOAD PROCEDURE

1- Download each of the nine files (named below) to a folder on your PC

setup_sft2841_v10.4.part01.exe

setup_sft2841_v10.4.part02.rar








2- Once the files are downloaded, go to the folder on your PC where the files

were saved. Double-click on the “setup_sft2841_v10.4.part01.exe” file. This

will open the software license window shown below. If you accept the terms,

click on “Accept”.

The “Install” window will open and allows you to select a destination folder on your PC

for SFT2841. Once you have selected your destination folder, click “Install”.

The “Install” process will create a folder called “SEPAM_SFT2841_V10.4” under your

selected destination folder.

Go to the “SEPAM_SFT2841_V10.4” folder and double-click on the filename

“ ”. This will de-compress all of the SFT2841 files in the “setup

SFT2841 V10.4” folder.

Go to the “setup SFT2841 V10.4” folder (see the files contained in this folder below).

Double-click on the file. This will install the software on your PC.

NOTE: You can save the folder “setup SFT2841 V10.4” and its sub-folders to a CD for

ease of installation on other PC’s.

B- SFT2841_V10.4 Commissioning Software

Installation procedure:

• Remove any previous installed versions of SFT2841

• Double click on the “Setup.exe” file in the “setup SFT2841 V10.4” folder

• Follow the instructions on the screen to install the software

• To install a complete version of SFT2841, you must input a valid serial number

(the original serial number of SFT2841 v9.0) for the software in place of the word

“Demonstration” during the install procedure (see window below)

• The installation procedure will place the SFT2841 icon on your PC’s desktop

If a valid serial number is not entered, SFT2841 will operate in the “Demonstration”

mode. The SFT2841 “Demonstration” software offers all the functions of the complete

version, with the exception of the functions available in connected mode and the file

saving function.

Double click on the SFT2841 icon to start the program.

66592076-sft2841-download-and-installation-instructions-v10-4.pdf

Documents