6 pdfsam micromanufacturing engineering and technology micro and nano technologies
TRANSCRIPT
-
8/12/2019 6 Pdfsam Micromanufacturing Engineering and Technology Micro and Nano Technologies
1/1
integrated manufacture with NCR. He then set up asuccessful consultancy before joining the Universityof Strathclyde studying for an MSc which led to aPhD, specializing in mechatronics and manufactur-ing automation. He then worked on the control andmechatronics aspects of the machine development
for the EU MASMICRO project.Email:[email protected]
Christoph HartlDr Christoph Hartl has been a Professor at theCologne University of Applied Sciences since2002. He worked as a General Manager respon-sible for the Hydroforming R&D Center of aGerman press manufacturer. He is also the Man-aging Director of the Institute of Production Tech-nology and Production Organization GmbH and
President of the Society for Technical and Scien-tific Education e.V. in Cologne. His currentresearch is focused on micro-hydroforming tech-nology, laser processing and process simulation.Email:[email protected]
Jens HoltkampMr Jens Holtkamp studied Mechanical Engineer-ing at the Aachen University of Technology(RWTH). Since 2004 he has been a research engi-neer at the Fraunhofer Institute for Laser Tech-
nology (ILT), Aachen, with the Department ofMicro-Technology. He is a member of the groupMicro Structuring and his main field of theresearch is laser assisted forming processes.Email:[email protected]
Pietro LarizzaDr Pietro Larizza is in charge of the Research& Development Division of Masmec Srl, Italy,carrying out industrial research devoted tothe Robotics, Automation, Measurement andAdvanced Production Technologies. He is named
as an Expert of the MIUR for the disciplines ofelectronics, electronics measurement and auto-matic controls. He has published various techni-cal papers and holds several industrial patents onidentification techniques and processing of medi-cal images.Email:[email protected]
Malte LangmackMr Malte Langmack studied Mechanical Engineering with focus on Micro and Precision Engineering at the Technical University Berlin, Germany. Since 2007 he has been working as research engineer in the field of micro-electrica
discharge machining at the Centre of Micro Production Technology of the Fraunhofer IPK.Email: [email protected]
Jainguo LinProfessor Jianguo Lin, Head of Mechanics oMaterials Division, Imperial College Londonleads the research in material processing designand optimization via process modeling, and hapublished over 150 research papers over the las20 years. He is a member of the editorial board
of five international journals, has an excellentrack record in attracting research funding fromEU, EPSRC, DTI and industries, and has organized a number of international conferences. Currently, he also heads a research group of 1researchers working on various material-formingprocesses.Email:[email protected]
Rafa LopezDr Rafael Lopez Tarazo n has a degree in Tele
communications Engineering (CommunicationBranch). He worked in the R&D Department oAlthea Productos Industriales, Spain, in 2000. In2001 he was contracted by IBM as a System Engineer for wide-area networks in Madrid and Barcelona. He was a founding member of RobotnikAutomation SLL in 2002 and since then has beenthe companys R&D manager.Email:[email protected]
Yanling MaDr Yanling Ma obtained her PhD and the
worked as a Post-Doctoral Research Fellow athe University of Strathclyde. Her expertise is intool/machine development for metal forming andmicro-forming. She contributed to the machinand tool design for the micro-stamping machinsystem developed at Strathclyde. Before shjoined the University of Strathclyde she worked
x Contributors
mailto:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]