580 sliding - aluminium | windows | doors - accessories · structural performance nata report:...
TRANSCRIPT
580 Sliding
Windows
580 Sliding
Features
WS-1
RTSW580.01RTDM001.01April 2000© Capral Aluminium Limited
• Max 1600mm sash height
• Max 15kg sash weight (1500mm x 900mmsash, 4mm glass)
• Heavy duty transoms, mullions andinterlocks to suit local conditions
• Key locking vent locks or keyed handles
• Cavity brick frame options available
• External Flange frame
• Federation outer frame
• Couplers to suit 90, 135 and 180 degreeadaption
• Single glazed up to 6.38mm laminated glass
The series 580 window is designed for versatilityand stylish appearance, weather sealed forenergy conservation and when combined withlong life finishes require minimal upkeep.
• Bold styling
• Interchangeable couplers ranging fromdomestic to light commercial applications
• Internal glazing (with up to 6mm capacity)allows for easy glass replacement
• Advanced weather sealing system for allround weather protection
• Overlapping jambs with concealed jointsensure both joint strength and completenessof finish
• Adjustable rollers for smooth operation
• Adjustable height catch that automaticallyengages in closed position for greatersecurity
• Designed to comply with the requirements ofAustralian Standard AS2047-1999
Limitations
Options
Structural performanceNATA report: 20048S2 (1370mm x 1810mm, type XO sample)
• Housing (span/150):
Serviceability limit state: +2200 Pa (span/204); -2210 Pa (span/242)
Ultimate strength: ±3300 Pa
• Residential (span/180)
Serviceability limit state: +2200 Pa (span/204); -2210 Pa (span/242)
Ultimate strength: ±3300 Pa
• Water penetration: 300 Pa (EP4903)
• Air infiltration: +75 Pa: 0.31; -75 Pa: -0.43
+150 Pa: 0.65; -150 Pa: -0.74
• Operating force: initiate movement: 65N
maintain movement: 23N
Acoustic performanceATF report: 1256 (1200mm x 1810mm sample, type XO 6mm glass)
• STC: 29
• OITC: 27
• RW = 29
• CT = 0
• CTR = -1
• CT (50-5000) = 0
• CTR (50-5000) = -1
• Rw (CT; CTR) = 29(0; -1)
• Rw (CT; CTR; CT (50-5000); CTR (50-5000)) = 29(0: -1; 0; -1)
Energy performance
Product Performance Data
RTSW580.01RTDM001.01
July 2002© Capral Aluminium Limited
580–2
Windows
580 Sliding
Note:1. Subscript 'w' refers to whole-window properties, which apply to all parameters except the damage-weighted fading
transmittance, Tdw. Uw is the whole-window U-value. SHGCw is the whole-window solar heat gain coefficient. Tvw is thewhole-window visible (light) transmittance.
2. Percentage improvement figures are compared with using base-case Generic Window 1 (3mm clear in std aluminium frame).3. A negative percentage improvement figure indicates performance worse than the base-case window and a positive
percentage improvement figure indicates performance better than the base-case window.4. Maximum air infiltration is 0.5 L/s.m2 at a positive pressure difference of 75 Pa as measured according to AS 2047.5. Static performance (Uw, SHGCw, Tvw, Tdw) calculated using Window 4.1 and Therm 2.1 software (Lawrence Berkeley
National Laboratory), 2000-2001.6. Annual energy performance (stars and % improvements) calculated using Nationwide House Energy Rating Software
(NatHERS) according to procedures of WERS 2000 (Australasian Window Council), www.wers.net.
Windows
580 Sliding
RTSW580.01RTDM001.01July 2002© Capral Aluminium Limited 580–3
Half size sections
Windows
580 Sliding
RTSW580.01RTDM001.01
July 2002© Capral Aluminium. Limited580–4
Half size sections (cont)
Windows
580 Sliding
RTSW580.01RTDM001.01July 2002© Capral Aluminium Limited 580–5
Half size sections (cont)
Windows
580 Sliding
RTSW580.01RTDM001.01
July 2002© Capral Aluminium. Limited580–6
Hardware
M029738Mullion Screw18 x #6 CSK HD
M029737Frame Screw25 x 6 Pan HD
M029736Sash Screw38 x 6 Truss HD
M029659MFRivet 4.8 x 3.2
M0274233mm G/Channel150m
M0274244mm G/Channel150m
M0274255mm G/Channel150m roll
M0274266mm G/Channel150m roll
M027103Glazing Wedge 7 Gap100m roll
M027104Glazing Wedge 8 Gap150m roll
M027105Glazing Wedge 9.5 Gap150m roll
M027248Hi-Fin Weatherpile500m roll
M027257Single sided tape 9 x 1.646m roll
M027231Sill Flap Seal250m roll
M027409Sill Flashing200m roll
M580223Gasket F/Light45.7m roll
M580221Gasket Head45.7m roll
M580220Gasket Sill45.7m roll
M580222Gasket Transom45.7m roll
M580256BK (Black)M580256PR (Primrose)M580256PW (White)Keyed alike
M580262Brick Fixing LugTwist-in
M580209Handle
M580201GVHandle Spring
M580170Sash Guide Button
M580202Roller Assembly
M580203Head Guide
M580213Windmould clip2m Length
M580168PVC Bead3.6m lengthBundles of 100
M570110GVBuild-in LugPush-on
M580230300Pa SillFoam Gasket45.7m
Windows
580 Sliding
RTSW580.01RTDM001.01July 2002© Capral Aluminium Limited 580–7
Hardware (cont)
M580231300 Pa TransomFoam Gasket45.7m
M580250Transom CapLong
M580251Transom CapShort
M580252Ball Bearing RollerCarriage Assembly
M580254Mullion Bracket480 Window
M580255Anti Lift Block
M580257Vent LockPackageBlackKeyed alike
MCORNEREQ4427Security ScreenCorner Stake
Windows
580 Sliding
RTSW580.01RTDM001.01
July 2002© Capral Aluminium. Limited580–8
Configurations and recommended maximum sizes
Windows
580 Sliding
RTSW580.01RTDM001.01July 2002© Capral Aluminium Limited 580–9
Configurations and recommended maximum sizes (cont)
Windows
580 Sliding
RTSW580.01RTDM001.01
July 2002© Capral Aluminium. Limited580–10
Half size assembly
Windows
580 Sliding
RTSW580.01RTDM001.01July 2002© Capral Aluminium Limited 580–11
Half size assembly (cont)
Windows
580 Sliding
RTSW580.01RTDM001.01
July 2002© Capral Aluminium. Limited580–12
Half size assembly (cont)
Win
do
ws
580S
liding
RT
SW
580.01R
TD
M001.01
July2002
©C
apralAlum
iniumLim
ited580–13
Half
sizeassem
bly
(con
t)
Win
do
ws
580S
liding
RT
SW
580.01R
TD
M001.01
July2002
©C
apralAlum
inium.Lim
ited580–14
Half
sizeassem
bly
(con
t)
Windows
580 Sliding
RTSW580.01RTDM001.01July 2002© Capral Aluminium Limited 580–15
Half size assembly (cont)
Windows
580 Sliding
RTSW580.01RTDM001.01
July 2002© Capral Aluminium. Limited580–16
Half size assembly (cont)
Windows
580 Sliding
RTSW580.01RTDM001.01July 2002© Capral Aluminium Limited 580–17
Half size assembly (cont)
Windows
580 Sliding
RTSW580.01RTDM001.01
July 2002© Capral Aluminium. Limited580–18
Half size assembly (cont)
Windows
580 Sliding
RTSW580.01RTDM001.01July 2002© Capral Aluminium Limited 580–19
Half size assembly (cont)
Windows
580 Sliding
RTSW580.01RTDM001.01
July 2002© Capral Aluminium. Limited580–20
Half size assembly (cont)
Windows
580 Sliding
RTSW580.01RTDM001.01July 2002© Capral Aluminium Limited 580–21
Half size assembly (cont)
Windows
580 Sliding
RTSW580.01RTDM001.01
July 2002© Capral Aluminium. Limited580–22
Half size assembly (cont)
Windows
580 Sliding
RTSW580.01RTDM001.01July 2002© Capral Aluminium Limited 580–23
Half size assembly (cont)
Windows
580 Sliding
RTSW580.01RTDM001.01
July 2002© Capral Aluminium. Limited580–24
Flyscreen details
Windows
580 Sliding
RTSW580.01RTDM001.01July 2002© Capral Aluminium Limited 580–25
Flyscreen details (cont)
Windows
580 Sliding
RTSW580.01RTDM001.01
July 2002© Capral Aluminium. Limited580–26
Security flyscreen details
Windows
580 Sliding
RTSW580.01RTDM001.01July 2002© Capral Aluminium Limited 580–27
Security flyscreen details (cont)
Windows
580 Sliding
RTSW580.01RTDM001.01
July 2002© Capral Aluminium. Limited580–28
Structural tables
150 Pa and 300 Pa Sills
Type XO
R=Residential l/180H=Housing l/150
Mullion type 1
Mullion type 2
Mullion type 3
Mullion type 4
Mullion type 5
Window sizeH x W (mm)
Wind Pressure Serviceability Limit State kPa
Mullion Mullion Mullion Mullion Mullion
Type 1 150Pa
300Pa
Type 2 150Pa
300Pa
Type 3 150Pa
300Pa
Type 4 150Pa
300Pa
Type 5 150Pa
300Pa
600 x 610R 5.000 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
600 x 910R 5.000 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
600 x 1210R 5.000 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
600 x 1510R 5.000 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
600 x 1810R 5.000 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
600 x 2110R 5.000 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
900 x 610R 4.978 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
900 x 910R 3.564 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
900 x 1210R 2.950 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
900 x 1510R 2.691 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
900 x 1810R 2.649 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
900 x 2110R 2.649 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
1000 x 610R 3.529 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
1000 x 910R 2.492 5.000 5.000 5.000 5.000
H 2.991 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
1000 x 1210R 2.021 4.700 4.802 5.000 5.000
H 2.425 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
1000 x 1510R 1.791 4.166 4.215 5.000 5.000
H 2.150 N3 N4 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
1000 x 1810R 1.703 3.960 3.980 5.000 5.000
H 2.043 N3 N4 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
1000 x 2110R 1.698 3.949 3.967 5.000 5.000
H 2.038 N3 N4 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
Note: These tables are based on theoretical section properties, not on approved tests as specified by AS2047
The N values in the above table represent the complete window rating based on NATA test reports, structural calculations andreinterpreted data from NATA test reports. The first N value relates to 150 Pa sill and the second N value relates to 300 Pa sill.All structural ratings are based on the mullion length relating to the 150 Pa sill (window height - 50 mm).Residential (R) is limited to 5.000 kPa Housing (H) is limited to 3.000 kPa
Windows
580 Sliding
RTSW580.01RTDM001.01July 2002© Capral Aluminium Limited 580–29
Structural tables (cont)
Type XO (cont)
R=Residential l/180H=Housing l/150
Mullion type 1
Mullion type 2
Mullion type 3
Mullion type 4
Mullion type 5
Window sizeH x W (mm)
Wind Pressure Serviceability Limit State kPa
Mullion Mullion Mullion Mullion Mullion
Type 1 150Pa
300Pa
Type 2 150Pa
300Pa
Type 3 150Pa
300Pa
Type 4 150Pa
300Pa
Type 5 150Pa
300Pa
1200 x 610R 1.963 4.565 5.000 5.000 5.000
H 2.356 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
1200 x 910R 1.363 3.170 3.976 5.000 5.000
H 1.636 N3 N4 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
1200 x 1210R 1.078 2.507 3.122 4.443 5.000
H 1.294 N3 N3 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
1200 x 1510R .923 2.147 2.652 3.774 5.000
H 1.108 N3 N3 2.576 N3 N4 2.652 N3 N4 3.000 N3 N5 3.000 N3 N5
1200 x 1810R .838 1.948 2.387 3.397 5.000
H 1.005 N3 N3 2.338 N3 N4 2.387 N3 N4 3.000 N3 N5 3.000 N3 N5
1200 x 2110R .798 1.855 2.259 3.214 5.000
H .957 N2 N2 2.226 N3 N4 2.259 N3 N3 3.000 N3 N5 3.000 N3 N5
1370 x 610R 1.289 2.998 4.040 5.000 5.000
H 1.547 N3 N4 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
1370 x 910R .887 2.064 2.781 3.958 5.000
H 1.065 N3 N3 2.477 N3 N4 2.978 N3 N4 3.000 N3 N5 3.000 N3 N5
1370 x 1210R .693 1.612 2.172 3.091 4.576
H .832 N2 N2 1.934 N3 N4 2.313 N3 N4 3.000 N3 N5 3.000 N3 N5
1370 x 1510R .584 1.357 1.829 2.602 3.853
H .700 N2 N2 1.629 N3 N3 1.935 N3 N3 2.753 N3 N4 3.000 N3 N5
1370 x 1810R .518 1.205 1.624 2.310 3.421
H .622 N1 N1 1.446 N3 N3 1.705 N3 N3 2.426 N3 N4 3.000 N3 N5
1370 x 2110R - 1.115 1.503 2.138 3.166
H .575 N1 N1 1.338 N3 N3 1.567 N3 N3 2.230 N3 N3 3.000 N3 N5
1500 x 610R .969 2.253 3.037 4.321 5.000
H 1.163 N3 N3 2.704 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
1500 x 910R .664 1.544 2.081 2.961 4.384
H .797 N2 N2 1.853 N3 N4 2.451 N3 N4 3.000 N3 N5 3.000 N3 N5
1500 x 1210R .515 1.198 1.614 2.297 3.401
H .618 N1 N1 1.438 N3 N3 1.892 N3 N3 2.693 N3 N4 3.000 N3 N5
1500 x 1510R - 1.000 1.347 1.917 2.839
H .516 N1 N1 1.200 N3 N3 1.570 N3 N3 2.235 N3 N3 3.000 N3 N5
1500 x 1810R - .877 1.182 1.683 2.491
H - - - 1.053 N2 N2 1.370 N2 N2 1.949 N3 N3 2.990 N3 N4
1500 x 2110R - .801 1.079 1.535 2.273
H - - - .961 N2 N2 1.241 N2 N2 1.766 N3 N3 2.727 N3 N4
Note: These tables are based on theoretical section properties, not on approved tests as specified by AS2047
The N values in the above table represent the complete window rating based on NATA test reports, structural calculations andreinterpreted data from NATA test reports. The first N value relates to 150 Pa sill and the second N value relates to 300 Pa sill.All structural ratings are based on the mullion length relating to the 150 Pa sill (window height - 50 mm).Residential (R) is limited to 5.000 kPa Housing (H) is limited to 3.000 kPa
Windows
580 Sliding
RTSW580.01RTDM001.01
July 2002© Capral Aluminium. Limited580–30
Structural tables (cont)
150 Pa and 300 Pa Sills
Type XOX
R=Residential l/180H=Housing l/150
Mullion type 1
Mullion type 2
Mullion type 3
Mullion type 4
Mullion type 5
Window sizeH x W (mm)
Wind Pressure Serviceability Limit State kPa
Mullion Mullion Mullion Mullion Mullion
Type 1 150Pa
300Pa
Type 2 150Pa
300Pa
Type 3 150Pa
300Pa
Type 4 150Pa
300Pa
Type 5 150Pa
300Pa
600 x 2110R 5.000 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
600 x 2410R 5.000 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
600 x 2710R 5.000 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
900 x 2100R 2.901 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
900 x 2410R 2.794 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
900 x 2710R 2.718 5.000 5.000 5.000 5.000
H 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
1000 x 2110R 1.925 4.476 4.539 5.000 5.000
H 2.309 N3 N4 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
1000 x 2410R 1.847 4.296 4.349 5.000 5.000
H 2.217 N3 N4 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
1000 x 2710R 1.788 4.157 4.201 5.000 5.000
H 2.145 N3 N4 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
1200 x 2100R .959 2.229 2.744 3.904 5.000
H 1.150 N3 N3 2.675 N3 N4 2.744 N3 N4 3.000 N3 N5 3.000 N3 N5
1200 x 2410R .913 2.124 2.609 3.712 5.000
H 1.096 N3 N3 2.549 N3 N4 2.609 N3 N4 3.000 N3 N5 3.000 N3 N5
1200 x 2710R .880 2.046 2.510 3.572 5.000
H 1.056 N3 N3 2.455 N3 N4 2.510 N3 N4 3.000 N3 N5 3.000 N3 N5
1370 x 2110R .593 1.380 1.859 2.646 3.918
H .712 N2 N2 1.656 N3 N3 1.957 N3 N3 2.784 N3 N4 3.000 N3 N5
1370 x 2410R .554 1.287 1.735 2.468 3.657
H .664 N1 N1 1.545 N3 N3 1.818 N3 N3 2.588 N3 N4 3.000 N3 N5
1370 x 2710R .530 1.232 1.661 2.362 3.497
H .636 N1 N1 1.478 N3 N3 1.737 N3 N3 2.472 N3 N4 3.000 N3 N5
1500 x 2110R - 1.005 1.354 1.927 2.854
H .519 N1 N1 1.206 N3 N3 1.570 N3 N3 2.235 N3 N3 3.000 N3 N5
1500 x 2410R - .927 1.249 1.777 2.633
H - - - 1.112 N3 N3 1.442 N2 N2 2.052 N3 N3 3.000 N3 N5
1500 x 2710R - .875 1.179 1.678 2.485
H - - - 1.050 N2 N2 1.357 N2 N2 1.931 N3 N3 2.982 N3 N4
Note: These tables are based on theoretical section properties, not on approved tests as specified by AS2047
The N values in the above table represent the complete window rating based on NATA test reports, structural calculations andreinterpreted data from NATA test reports. The first N value relates to 150 Pa sill and the second N value relates to 300 Pa sill.All structural ratings are based on the mullion length relating to the 150 Pa sill (window height - 50 mm).Residential (R) is limited to 5.000 kPa Housing (H) is limited to 3.000 kPa
Windows
580 Sliding
RTSW580.01RTDM001.01July 2002© Capral Aluminium Limited 580–31
Structural tables (cont)
Transom Type 1 150 Pa
Type XO/FF
R=Residential l/180H=Housing l/150
Transom type 1
Italics represent Deflectionlimited by Mullion
Window sizeH x W (mm)
Wind Pressure Serviceability Limit State kPa
Mullion Mullion Mullion Mullion MullionType 1 150
PaType 2 150
PaType 3 150
PaType 4 150
PaType 5 150
Pa
1860 x 610R 1.963 4.565 5.000 5.000 5.000
H 2.356 N3 3.000 N3 3.000 N3 3.000 N3 3.000 N3
1860 x 910R 1.363 3.170 3.976 5.000 5.000
H 1.636 N3 3.000 N3 3.000 N3 3.000 N3 3.000 N3
1860 x 1210R 1.078 2.507 3.122 3.684 3.684
H 1.294 N3 3.008 N3 3.000 N3 3.000 N3 3.000 N3
1860 x 1510R .923 1.655 1.655 1.655 1.655
H 1.108 N3 1.986 N3 1.986 N3 1.986 N3 1.986 N3
1860 x 1810R .838 .894 .894 .894 .894
H 1.005 N3 1.072 N3 1.072 N3 1.072 N3 1.072 N3
1860 x 2110R .540 .540 .540 .540 .540
H .648 N1 .648 N1 .648 N1 .648 N1 .648 N1
2030 x 610R 1.289 2.998 4.040 5.000 5.000
H 1.547 N3 3.000 N3 3.000 N3 3.000 N3 3.000 N3
2030 x 910R .887 2.064 2.781 3.958 5.000
H 1.065 N3 2.477 N3 2.978 N3 3.000 N3 3.000 N3
2030 x 1210R .693 1.612 2.172 3.091 3.422
H .832 N2 1.934 N3 2.313 N3 3.000 N3 3.000 N3
2030 x 1510R .584 1.357 1.616 1.616 1.616
H .700 N2 1.629 N3 1.935 N3 1.939 N3 1.939 N3
2030 x 1810R .518 .855 .855 .855 .855
H .622 N1 1.026 N3 1.026 N3 1.026 N3 1.026 N3
2030 x 2110R - .510 .510 .510 .510
H .575 N1 .612 N1 .612 N1 .612 N1 .612 N1
Type XOX/FFF
R=Residential l/180H=Housing l/150
Window sizeH x W (mm)
Wind Pressure Serviceability Limit State kPaMullion Mullion Mullion Mullion MullionType 1 150
PaType 2 150
PaType 3 150
PaType 4 150
PaType 5 150
Pa
1860 x 2110R .540 .540 .540 .540 .540
H .6481 N1 .648 .648 N1 .648 N1 .648 N1
1860 x 2410R - - - - -
H - - - - -
1860 x 2710R - - - - -
H - - - - -
2030 x 2110R .518 .518 .518 .518 .518
H .622 N1 .622 N1 .622 N1 .622 N1 .622 N1
2030 x 2410R - - - - -
H - - - - -
2030 x 2710R - - - - -
H - - - - -
Note: These tables are based on theoretical section properties, not on approved tests as specified by AS2047
The N values in the above table represent the complete window rating based on NATA test reports, structural calculations andreinterpreted data from NATA test reports.Residential (R) is limited to 5.000 kPa Housing (H) is limited to 3.000 kPa
Windows
580 Sliding
RTSW580.01RTDM001.01
July 2002© Capral Aluminium. Limited580–32
Structural tables (cont)
Transom Type 2 150 Pa and 300 Pa
Type XO/FF
R=Residential l/180H=Housing l/150
Transom type 2 150 Pa
Transom type 2 300 Pa
Italics represent Deflectionlimited by Mullion
Type XOX/FFF
R=Residential l/180H=Housing l/150
Window sizeH x W (mm)
Wind Pressure Serviceability Limit State kPaMullion Mullion Mullion Mullion MullionType 1 150
Pa300Pa
Type 2 150Pa
300Pa
Type 3 150Pa
300Pa
Type 4 150Pa
300Pa
Type 5 150Pa
300Pa
1860 x 610R 1.963 4.565 5.000 5.000 5.000H 2.356 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
1860 x 910R 1.363 3.170 3.976 5.000 5.000H 1.636 N3 N4 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
1860 x 1210R 1.078 2.507 3.122 4.443 5.000
H 1.294 N3 N3 3.008 N3 N5 3.000 N3 N4 3.000 N3 N4 3.000 N3 N5
1860 x 1510R .923 2.147 2.652 3.774 5.000H 1.108 N3 N3 2.576 N3 N4 2.652 N3 N4 3.000 N3 N4 3.000 N3 N5
1860 x 1810R .838 1.948 2.387 3.397 3.904H 1.005 N3 N3 2.338 N3 N4 2.387 N3 N4 3.000 N3 N4 3.000 N3 N5
1860 x 2110R .798 1.855 2.259 3.214 2.767H .957 N2 N2 2.226 N3 N4 2.259 N3 N3 3.000 N3 N4 2.767 N3 N4
2030 x 610R 1.289 2.998 4.040 5.000 5.000H 1.547 N3 N4 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5 3.000 N3 N5
2030 x 910R .887 2.064 2.781 3.958 5.000H 1.065 N3 N3 2.477 N3 N4 2.978 N3 N4 3.000 N3 N5 3.000 N3 N5
2030 x 1210R .693 1.612 2.172 3.091 4.576
H .832 N2 N2 1.934 N3 N4 2.313 N3 N4 3.000 N3 N4 3.000 N3 N5
2030 x 1510R .584 1.357 1.829 2.602 3.853H .700 N2 N2 1.629 N3 N3 1.935 N3 N3 2.753 N3 N4 3.000 N3 N5
2030 x 1810R .518 1.205 1.624 2.310 3.421H .622 N1 N1 1.446 N3 N3 1.705 N3 N3 2.426 N3 N4 3.000 N3 N5
2030 x 2110R - 1.115 1.503 2.138 2.606H .575 N1 N1 1.338 N3 N3 1.567 N3 N3 2.230 N3 N3 2.606 N3 N4
Window sizeH x W (mm)
Wind Pressure Serviceability Limit State kPaMullion Mullion Mullion Mullion MullionType 1 150
Pa300Pa
Type 2 150Pa
300Pa
Type 3 150Pa
300Pa
Type 4 150Pa
300Pa
Type 5 150Pa
300Pa
1860 x 2110R .959 2.229 2.744 2.767 2.767H 1.150 N3 N3 2.675 N3 N4 2.744 N3 N4 2.767 N3 N4 2.767 N3 N4
1860 x 2410R .913 2.124 2.073 2.071 2.071H 1.096 N3 N3 2.073 N3 N3 2.073 N3 N3 2.071 N3 N3 2.071 N3 N3
1860 x 2710R .880 1.583 1.583 1.583 1.583H 1.056 N3 N3 1.612 N3 N3 1.612 N3 N3 1.611 N3 N3 1.611 N3 N3
2030 x 2110R .593 1.380 1.859 2.606 2.606H .712 N2 N2 1.656 N3 N3 1.957 N3 N3 2.606 N3 N4 2.606 N3 N4
2030 x 2410R .554 1.287 1.735 1.937 1.937H .664 N1 N1 1.545 N3 N3 1.818 N3 N3 1.937 N3 N3 1.937 N3 N3
2030 x 2710R .530 1.232 1.477 1.477 1.477H .636 N1 N1 1.478 N3 N3 1.501 N3 N3 1.500 N3 N3 1.500 N3 N3
Note: These tables are based on theoretical section properties, not on approved tests as specified by AS2047
The N values in the above table represent the complete window rating based on NATA test reports, structural calculations andreinterpreted data from NATA test reports. The first N value relates to 150 Pa transom and the second N value relates to 300 Patransom.All structural ratings are based on the lower structural properties of the Type 2 300 Pa transom.Residential (R) is limited to 5.000 kPa Housing (H) is limited to 3.000 kPa
Windows
580 Sliding
RTSW580.01RTDM001.01July 2002© Capral Aluminium Limited 580–33
Structural tables (cont)
150 Pa and 300 Pa Sills
Type OXXO
R=Residential l/180H=Housing l/150
Mullion type 1
Mullion type 2
Window sizeH x W (mm)
Wind Pressure Serviceability Limit StatekPa
Mullion Type 1 Mullion Type 2150Pa
300Pa
150Pa
300Pa
1200 x 2410R 1.081 2.507
H 1.297 N3 N3 3.000 N3 N5
1200 x 2710R .991 2.313
H 1.190 N3 N3 2.775 N3 N4
1370 x 2410R .695 1.612
H .834 N2 N2 1.934 N3 N4
1370 x 2710R .633 1.475
H .759 N2 N2 1.771 N3 N3
1500 x 2410R .517 1.198
H .620 N1 N1 1.437 N3 N3
1500 x 2710R - 1.093
H .562 N1 N1 1.311 N3 N3
Note: These tables are based on theoretical section properties, not on approved tests as specified by AS2047
The N values in the above table represent the complete window rating based on NATA test reports, structural calculationsand reinterpreted data from NATA test reports. The first N value relates to 150 Pa sill and the second N value relates to300 Pa sill.All structural ratings are based on the mullion length relating to the 150 Pa sill (window height - 50 mm).Residential (R) is limited to 5.000 kPa Housing (H) is limited to 3.000 kPa
Windows
580 Sliding
RTSW580.01RTDM001.01
July 2002© Capral Aluminium. Limited580–34
Structural details
Windows
580 Sliding
RTSW580.01RTDM001.01July 2002© Capral Aluminium Limited 580–35
Structural details (cont)