$5342)!, !2+%23 - newman tools inc. · pdf fileorange tan brown pink ... they won’t...

www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442

12 Special,OpaqueNissen

Colors…For Better,BrighterMarking

WHITE

YELLOW

RED

BLACK

BLUE

GREEN

ORANGE

TAN

BROWN

PINK

GRAY

PURPLE

Ball-Point Sizes

5/64”

1/8”

3/16”

Metal MarkerThe Nissen Metal Marker utilizes a specially formulated polyurethane paint to providepermanent marking under almost any conditions. The marks will remain bright, clear,and legible even on material that will be stored outside for long periods of time ormaterial that will receive heavy abuse.• Marks on all metals, wood, rubber, glass, etc.• Marks on any rough, smooth, wet, oily or dry surfaces.• Marks withstand heat and weathering; they won’t chip, peel, fade or rub off.• Available in 12 lead-free, high gloss colors and in 3 point sizes.

White MMWHF 00200 MMWHM 00201 MMWHB 00202Yellow MMYEF 00203 MMYEM 00204 MMYEB 00205Black MMBKF 00206 MMBKM 00207 MMBKB 00208Red MMREF 00209 MMREM 00210 MMREB 00211Blue MMBUF 00212 MMBUM 00213 MMBUB 00214Green MMGNF 00215 MMGNM 00216 MMGNB 00217Orange MMORF 00218 MMORM 00219 MMORB 00220Brown MMBRF 00221 MMBRM 00222 MMBRB 00223Pink MMPIF 00224 MMPIM 00225 MMPIB 00226Purple MMPUF 00227 MMPUM 00228 MMPUB 00229Gray MMGYF 00230 MMGYM 00231 MMGYB 00232Tan MMTAF 00233 MMTAM 00234 MMTAB 00235

5/64” Point Size 1/8” Point Size 3/16” Point SizePart No. UPC Part No. UPC Part No. UPC

High TemperatureMetal MarkerThe Nissen High Temperature Metal Marker provideslegible markings at temperatures as high as 2100ºF (1150ºC).• Marks on rough, smooth, wet, oily or dry surfaces.• Available in 2 lead-free colors with a 1/8” point size.

White HTWHM 00290Black HTBKM 00291

Part No. UPCTextile MarkerThe Nissen Ball Point Textile Marker is used to permanently mark fabrics wherepermanent identification is required.• Marks resist soaping, washing, degumming, fulling, caustic, scouring, carbonizing

and dyeing processes.• Available in 7 colors and 4 point sizes.

All of the Nissen Ball Point markers feature durable aluminum tubeswith non-clogging, tough, case-hardened steel points and precision440 Stainless Steel balls. These handy markers will write in any position: horizontal, vertical, even overhead.

2

Yellow DRYEFM DRYEF DRYEM DRYEBWhite DRWHFM DRWHF DRWHM DRWHBRed DRREFM DRREF DRREM DRREBBlue DRBUFM DRBUF DRBUM DRBUBGreen DRGNFM DRGNF DRGNM DRGNBOrange DRORFM DRORF DRORM DRORB

Black BPBKFM BPBKF BPBKM BPBKB

3/32'' 5/64'' 1/8'' 3/16''Point Size Point Size Point Size Point SizePart No. Part No. Part No. Part No.

DYE RESIST

Bleach Proof


3

Super Fine Metal MarkerThe Nissen Super Fine Metal Marker is an unbreakable plastic tube filled with paint and features a precision stainless steel tip for precise, very fine line marking.The easy to use marker can be conveniently carried in your pocket or tool box.

• Marks on metal, wood, plastic, glass, cardboard, etc.• Marks on wet, oily or dry surfaces.• Available in 7 bright colors.

White SFWH 00800Yellow SFYE 00801Red SFRE 00802Black SFBK 00803Blue SFBU 00804Green SFGN 00805Blaze Orange SFOR 00806(Fluorescent)

Part No. UPC

Metal Marker In A BottleThe Nissen Ball Point Metal Marker is available in an unbreakable plastic bottle for marking with painton metal, wood, plastic, glass, etc. The tough metal tip has a precision stainless steel ball and comeswith a plastic cap to keep the tip clean and to allow the marker to be carried in your pocket.• Marks on rough, smooth, wet, oily or dry surfaces.• Marks are durable, weatherproof and won’t chip, peel, fade or rub off.• Fast-drying.• Marker is refillable.• Available in 7 high gloss, lead-free colors and in 3 point sizes.

White SBWHF 02000 SBWHM 02001 SBWHB 02002Yellow SBYEF 02003 SBYEM 02004 SBYEB 02005Red SBREF 02006 SBREM 02007 SBREB 02008Black SBBKF 02009 SBBKM 02010 SBBKB 02011Blue SBBUF 02012 SBBUM 02013 SBBUB 02014Green SBGNF 02015 SBGNM 02016 SBGNB 02017Orange SBORF 02018 SBORM 02019 SBORB 02020

3/64” Pt Size 3/32” Pt Size 1/8” Pt SizePart No. UPC Part No. UPC Part No. UPC

Solid Barrel Metal MarkerThe Nissen Solid Barrel Metal Marker uses an unbreakable aluminum barrel, stainless steel point and unique pump mechanism to dispense high quality, permanent paint. The marker is convenient to carry in your pocket.

• Marks on metal, wood, glass, plastic, etc.• Writes on any surface: rough, smooth, rusty, wet, oily or dry.• Marks withstand weathering: they won’t peel, chip, or rub off.• Markers are economical.• Available in seven lead-free, high gloss colors and three point sizes.

White MBWHF 00413 MBWHM 00420 MBWHB 00427Yellow MBYEF 00414 MBYEM 00421 MBYEB 00428Black MBBKF 00415 MBBKM 00422 MBBKB 00429Red MBREF 00416 MBREM 00423 MBREB 00430Blue MBBUF 00417 MBBUM 00424 MBBUB 00431Green MBGNF 00418 MBGNM 00425 MBGNB 00432Orange MBORF 00419 MBORM 00426 MBORB 00433

5/64” Pt Size 1/8” Pt Size 3/16” Pt SizePart No. UPC Part No. UPC Part No. UPC


4

Feltip Paint MarkersThe versatile Nissen Feltip Paint Marker dispenses a fast-drying, high gloss enamel paintfor permanent marking, lettering, coding and numbering of both interior and exterior surfaces. The markers are easy to use and convenient to carry in your pocket.• Writes or marks on almost anything: metal, plastic, printed circuit boards, glass, wood,

paper, leather, textiles, etc.• Writes on any surface: porous or non-porous, rough, smooth, wet, oily or dry.• Marks are permanent: they won’t chip, peel, fade or rub off. They withstand heat and

weathering under adverse conditions.• Unique precision valve accurately meters flow, so the right amount of paint passes

through the tip.• Available in 9 bright, high gloss, lead-free colors.• Marks are approximately 1/8” wide.• Long lasting replaceable fiber tips allow full use of the marker.

White FPWHM 00350Yellow FPYEM 00351Black FPBKM 00352Red FPREM 00353Blue FPBUM 00354Green FPGNM 00355Orange FPORM 00356Silver FPSIM 00357Gold FPGOM 00358Replacement Tips RTTEM 00700(Pkg. of 10)

Part No. UPC


5

White WBWH 00900Yellow WBYE 00901Red WBRE 00902Black WBBK 00903Blue WBBU 00904Green WBGN 00905Replacement Tips RTMAS 00740(Pkg. of 10)

Part No. UPC

Jumbo Feltip Paint MarkerThe Nissen Jumbo Feltip Paint Marker makes big, bold marks with a fast-drying, highgloss enamel paint for permanent marking.• Marks on metal, plastic, glass, cardboard, wood, leatrher, textiles, etc.• Writes on any surface; porous, non-porous, wet, oily or dry.• Marks are permanent: they won’t chip, fade, peel or rub off. They withstand heat

and weathering under adverse conditions.• Precision valve accurately measures paint flow.• Marker produces marks of 5/16”, 1/8” and 1/16”.• Available in 7 bright, high gloss, lead-free colors.• Replaceable fiber tips allow for full use of the marker.

White FPWHJ 09001Yellow FPYEJ 09002Red FPREJ 09003Black FPBKJ 09004Blue FPBUJ 09005Green FPGNJ 09006Orange FPORJ 09007Replacement Tips RTMAJ 09008(Pkg. of 10)

Part No. UPC

Nylon Tip FeltipPaint Marker – Fine LineThe tough durable Nylon tip dispenses a fast-drying, high gloss enamel paint forpermanent marking, lettering, coding and numbering of both interior and exterior surfaces. The markers are easy to use and convenient to carry in your pocket.• Writes or marks almost anything: metal, plastic, printed circuit boards, glass,

wood, paper, leather, textiles, etc.• Writes on any surface; porous, non-porous, rough, smooth, wet, oily or dry.• Marks are permanent: they won’t chip, fade, peel or rub off. They withstand heat

and weathering under adverse conditions.• Marks are approximately 0.75 mm wide.• Unique precision valve accurately meters the flow, so the right amount of paint

passes through the tip.• Available in 9 bright, high gloss, lead-free colors.

White FPWHF 00370Yellow FPYEF 00371Black FPBKF 00372Red FPREF 00373Blue FPBUF 00374Green FPGNF 00375Orange FPORF 00376Silver FPSIF 00377Gold FPGOF 00378

Part No. UPC

Acrylic Feltip Paint MarkerThe Nissen Acrylic Feltip Paint Marker is environmentally safe and utilizes awater-based acrylic paint; it is non-flammable, non-hazardous and non-toxic.The marks are bright, permanent, and weatherproof.• Does not include any chemicals listed by California Proposition 65, EPA HAPS,

and SARA 313.• Marks on metal, wood, plastic, ceramics, glass, cardboard, etc.• Writes on any surface; porous, non-porous, rough, smooth, oily or dry.• Marks are permanent; they won’t peel, chip, fade, or rub off.• Packed in an unbreakable plastic tube.• Precision valve accurately meters the flow of paint to the point.• Long lasting fiber tips are replaceable• Available in 6 bright high gloss, lead free colors.


6

Detergent Removable FeltipPaint MarkerThe Nissen Detergent Removable Feltip Paint Marker produces permanent paint markswhich can easily be removed from non-porous surfaces with detergent.• Marks on metal, plastic, glass, etc.• Marks can be completely removed for painting or coating.• Marks are weather resistant.• Paint is fast-drying.• Available in 6 bright, high gloss, lead-free colors.• Replaceable fiber tips allow full use of the marker.

White DRFPWH 06011Yellow DRFPYE 06012Red DRFPRE 06013Black DRFPBK 06014Blue DRFPBU 06015Green DRFPGN 06016Replacement Tips RTDR 06017(Pkg. of 10)

Part No. UPC

Water Removable FeltipPaint MarkerThe Nissen Water Removable Feltip Paint Marker produces permanent paint markswhich can be easily removed from non-porous surfaces with plain water.• Marks on metal, plastic, glass, etc.• Marks can be completely removed prior to painting or coating.• Paint is fast-drying.• Available in 6 bright, high-gloss, lead-free colors.• Replaceable fiber tips allow full use of the marker.

White WRFPWH 06001Yellow WRFPYE 06002Red WRFPRE 06003Black WRFPBK 06004Blue WRFPBU 06005Green WRFPGN 06006Replacement Tips RTWR 06007(Pkg. of 10)

Part No. UPC

Galvanizer’s Feltip Paint MarkerThe Nissen Galvanizer’s Feltip Paint Marker uses a valve-action to dispense a paint especially formulated for fabricators who have their material galvanized. This fast-drying,weather resistant marking paint can be put on steel during the fabrication process.However, the marking paint is designed to be completely removed by the pickling bath priorto galvanizing, thus leaving a clean surface for the zinc plating.• Writes on rough, rusty or smooth surfaces.• Writes on wet, oily or dry surfaces.• Fast-drying.• Prior to pickling – the marks are permanent: they won’t chip, peel, fade or rub off.• Packed in an unbreakable aluminum tube.• Precision valve meters paint flow.• Available in 3 bright, lead-free colors.

White GFWH 00570Yellow GFYE 00571Black GFBK 00572Replacement Tips RTMAS 00740(Pkg. of 10)

Part No. UPC

Removable Paint Markersfor Fabricators

Paint Marks Removed In Pickling Bath


7

Solid Paint MarkersThe smooth writing Nissen Solid Paint Markers make marking smooth, fast and easy. The markers aresolid sticks of paint protected by an unbreakable plastic case. They can conveniently and cleanly be carried in your pocket. The plastic case prevents the paint from drying out, so it always writes easily andsmoothly. The case also allows you to use the entire stick without needing a separate holder.• Marks on metal, wood, plastic, glass, cardboard, textiles, etc.• Writes on any surface: rough, smooth, wet, oily or dry. Even marks under water.• Marks won’t run.• Marks are permanent: they won’t chip, peel, fade or rub off. They withstand heat and weathering

under adverse conditions.• If desired, marks can be removed from non-porous surfaces with standard

industrial solvents.• Available in four fast-drying, lead-free colors.• Available in Standard (approximately 5/16” wide line) and Jumbo

(approximately 1/2” wide line) versions.

White SPWHS 00300 SPWHJ 00310Yellow SPYES 00301 SPYEJ 00311Red SPRES 00302 SPREJ 00312Black SPBKS 00303 SPBKJ 00313

Solid Paint Marker Jumbo Solid Paint MarkerPart No. UPC Part No. UPC

Great for plasma cutting,marks underwater.


86

White MAWH 00330Yellow MAYE 00331Black MABK 00332Red MARE 00333Blue MABU 00334Green MAGN 00335Orange MAOR 00336Aluminum MAAL 00337

Part No. UPC

Marker AThe Nissen Marker A is a stick of paint in a solid formin a cardboard holder.• Marks on metal, wood, plastic, glass, cardboard,

textiles, etc.• Marks on any surface: rough, smooth, wet, oily

or dry.• Marks are permanent; they won’t chip, peel, fade or

rub off. They withstand heat and weathering.• Markers are economical.• Available in eight fast-drying, lead-free colors.• Size is 11/16” x 4 7/8”.

Mini StickThe Nissen Mini Stick is solid paint which can easily be used on almostany surface.• Marks on any surface rough, smooth, rusty, wet or oily.• Creates bold permanent marks on metal, wood, plastic, rubber or cardboard.• Ideal for temporary markings on glass, leaves no residue, yet mark is water

resistant.• 3/8” diameter allows for fine line marking.• Available in 4 lead-free colors.• 10 piece box fits easily into your pocket for added convenience.

White MSWH 00490Yellow MSYE 00491Red MSRE 00492Black MSBK 00493

Part No. UPC


9

Very HighTemperature-SThe Nissen Very High Temperature-S Marker is astick of paint in a solid form designed to markhot surfaces ranging from 250°F to 1600°F.

• Marks will not run, peel or discolor.• Marks withstand weathering.• Markers are economical.• Available only in white.• Size is 9/16” x 5”.

Blue PMS 00340

Part No. UPC

MarksbleedthroughPrimer

Penamark-SThe Nissen Penamark-S is a stick of paint in a solidform designed especially for fabricators. Marks placed onbare metal will bleed through the oil-based primer andremain visible. The penetrating action can be stopped, soas not to bleed through the final coating.

• Marks on any surface: rough, smooth, wet, oily or dry.

• Available only in blue.

• Size is 11/16” x 4 1/2”.

White VHTS 00342

Part No. UPC

Lumber CrayonThe Nissen Lumber Crayon will make durable, waterproof marks on wood, stone,metal, concrete, plastic, cardboard, rubber, etc. The special formula will last muchlonger than wax or a chalk crayon. Packed 12 per box.• 4-1/2” x 1/2” hexagonal shape.• Five bright, lead-free colors.

White LUWH 00564Yellow LUYE 00560Red LURE 00561Black LUBK 00562Blue LUBU 00563

Part No. UPC

Railroad ChalkNissen Chalk will make large temporary marks on metal, wood, rubber, plastic, con-crete, paper, textiles, cardboard, etc. Packed 144 per box.• Large 4” x 1” tapered shape.• Special Industrial Grade to resist crumbling.• Available in 5 high-visibility colors.

White RRWH 00580Yellow RRYE 00581Red RRRE 00582Blue RRBU 00583Green RRGN 00584

Part No. UPC

White HTS 00341

Part No. UPC

HighTemperature-SThe Nissen High Temperature-SMarker is a stick of paint in a solidform designed to mark hot surfacesranging from 150°F to 1200°F.

• Marks will not run, peel or discolor.• Marks withstand weathering.• Markers are economical.• Available only in white.• Size is 9/16” x 5”.


10

The Nissen Low Chloride Markers are specifically designed to safely mark metals which are attacked by halogens and low melting metallics.They will not impact contaminants that could cause cracking or weakening of the metal, especially with heat applications, such as welding orcutting. All of our Low Chloride Markers meet or exceed the requirements of the United States Energy Research and DevelopmentAdministration’s RDT Standard F-7-3T. An independent laboratory’s Certification of Analysis is traceable to the marker and is available for allof our Low Chloride Markers.

Markers For Stainless Steel

Low Chloride Standard Ink MarkerThe Nissen Low Chloride Ink Marker uses a capillary action to dispense a very fast-drying ink.• Chisel point allows fine, medium and broad lines to be drawn.• Available only in black.

Black LCSIMBK 07101

Part No. UPC

Low Chloride Fine Point Ink MarkerThe Nissen Low Chloride Fine Point Ink Marker uses a capillary action to dispense a veryfast-drying ink.• Draws very fine lines.• Available only in black.

Black LCFIMBK 07100

Part No. UPC

Low Chloride Feltip Paint MarkerThe Nissen Low Chloride Feltip Paint Marker utilizes a valve action to dispense a fast-drying, high gloss enamel paint.• Marks on rough, smooth, wet, oily or dry surfaces.• Marks will withstand heat and weathering: they won’t chip, peel, fade or rub off.• Available in 4 bright, high gloss colors.• Long lasting replaceable 1/8” fiber tips.

White LCFPWH 00390Yellow LCFPYE 00391Black LCFPBK 00392Red LCFPRE 00393Replacement Tips RTTEM 00700(Pkg. of 10)

Part No. UPC

Low Chloride Metal MarkerThe Nissen Low Chloride Metal Marker uses a stainless steel ball to dispense a speciallyformulated polyurethane paint.• Marks on rough, smooth, wet, oily or dry surfaces.• Marks will withstand heat and weathering: they won’t chip, peel, fade or rub off.• Available in 8 bright, high gloss colors and in 3 point sizes.

White LCWHF 00250 LCWHM 00251 LCWHB 00252Yellow LCYEF 00253 LCYEM 00254 LCYEB 00255Black LCBKF 00256 LCBKM 00257 LCBKB 00258Red LCREF 00259 LCREM 00260 LCREB 00261Blue LCBUF 00262 LCBUM 00263 LCBUB 00264Green LCGNF 00265 LCGNM 00266 LCGNB 00267Orange LCORF 00268 LCORM 00269 LCORB 00270Pink LCPIF 00271 LCPIM 00272 LCPIB 00273

5/64” Point Size 1/8” Point Size 3/16” Point SizePart No. UPC Part No. UPC Part No. UPC


11

Temperature Indicating SticksNissen Temperature Sticks are an easy, economical way to determine surface temperatures.The Temperature Sticks are 5 inches long and protected by an adjustable aluminum holder.They are guaranteed accurate to within ± 1% of their temperature rating.

The Sticks have many applications and are widely used in the welding and heat treatingindustries.

The Sticks may be used either by making a mark on the surface and heating the materialuntil the mark melts, or the material may be heated and the surface stroked with the Sticksuntil they leave a liquid smear.

The marks are easily removed with water, if they have not become charred. If the markshave become charred, it may be necessary to use abrasives to remove the marks.

Temperature Rating

122 50 T122 01122140 60 T140 01140150 66 T150 01150167 75 T167 01167

176 80 T176 01176200 93 T200 01200212 100 T212 01212225 107 T225 01225

248 120 T248 01248257 125 T257 01257302 150 T302 01302350 177 T350 01350

392 200 T392 01392450 232 T450 01450482 250 T482 01482500 260 T500 01500

572 300 T572 01572600 316 T600 01600662 350 T662 01662752 400 T752 01752

1112 600 T1112 01112

°F °C Part No. UPC


12

Welder Marking KitThis kit is especially designed for welders.It contains:• Flat soapstone holder with soapstone.• Flat Fine Line soapstone holder with soapstone.• Round soapstone holder with soapstone.

K1 00001

Part No. UPC

Marking KitThe Nissen Marking Kit comes in a convenientvinyl package. This kit is easy to slip into yourpocket or to carry in your tool box. It consists ofan assortment of markers to do any marking job.

The Marking Kit contains three markers, one ofwhich will be perfect for your marking needs.

SoapstoneNatural soapstone is used for the temporary marking of metals during welding/fabricatingoperations. It will not contaminate the welds. It is also used for the temporary marking oftextiles. Soapstone is now available in a Fine Line flat version (1/16” thick) which does notneed sharpening. Packed 144 per box.• Flat 5” x 1/2” x 3/16” (127 x 12.7 x 1.6 mm)• Flat Fine Line 5” x 1/2” x 1/16” (127 x 12.7 x 1.6 mm)• Round 5” x 1/4” (127 x 6.4 mm)• Square 5” x 1/4” x 1/4” (127 x 6.4 x 6.4 mm)

Flat SSFL 00440Flat Fine Line SSFLF 00445Round SSRO 00441Square SSSQ 00442

Part No. UPC

Soapstone HoldersDurable aluminum holders are available to protect and dispense the soapstone.• Available to fit flat, flat fine line, and round soapstones.

Flat SHFL 00443Flat Fine Line SHFLF 00446Round SHRO 00444

Part No. UPC


13

Silver Welder’s PencilThe Nissen Silver Welder’s Pencil was designed for fine line layout work onall metals. The marks will illuminate when cutting or welding.• Marks don’t burn off or rub off like soapstone.• The durable marks will not melt or fade.• Pencils will not break like soapstone.• Can be sharpened with an ordinary pencil sharpener.

Blister Package of 3 Pencils SWPC 06050Package of 12 Pencils SWPD 06051

Part No. UPC

Feltip Ink MarkersThe Nissen Feltip Ink Marker will permanently mark on almost any surface: cardboard,wood, metal, paper, plastic, glass, etc. They will last 8 to 10 times as long as thetypical felt tip marker; the entire marker barrel is filled with ink, not fiber stuffing. Thepatented valve-action dispenses the ink as required.• Durable weatherproof marks• Replaceable felt tips• Four fast-drying bright colors

Black FIBKB 00520Red FIREB 00521Blue FIBUB 00522Green FIGNB 00523Replacement Tips RTMAB 00730

(Pkg. of 10)

Broad Tip Part No. UPC

Feltip Ink Markers


Fine Point Ink MarkerThis permanent marker is ideal for fine line marking on cardboard, paper, wood, glass,metal, plastic, etc.• Permanent• Fast-Drying• Tough tip won’t wear out• Inexpensive

Black FIMBK 07000Red FIMRE 07001Blue FIMBU 07002Green FIMGN 07003

Part No. UPC

Capillary Fiber Tip Ink Markers

Blue Layout FluidNissen Blue Layout Fluid is a convenient aerosol spray that dries quickly to a deep blue,translucent, non-reflecting surface. It eliminates glare and allows you to scribe sharp,clean lines.• Won’t chip, peel or rub off.• Very good resistance to solvents and metalworking fluids.

BL 00606

Part No. UPC

14

ScriberAll Nissen scribes come with 100% Tungston Carbide 1/8” points. These points are much harder than typical steel point scribersand they may be resharpened on a grinding wheel if you desire.

Scribe with MagnetThis scribe features a high quality, zinc-plated magnet on the rear end of the scriber. This magnet allows you to quickly and easily determine if the metal you are working on is ferrous ornon-ferrous.

Magnet Scribe SM 00450

Part No. UPC

Standard Ink MarkerThis permanent ink marker features a chisel tip for making fine, medium or broad marks on cardboard, paper, wood, glass, metal, plastic, etc.• Permanent• Fast-Drying• Inexpensive

Black SIMBK 07010Red SIMRE 07011Blue SIMBU 07012Green SIMGN 07013Blaze Orange SIMOR 07014(Fluorescent)

Part No. UPC


Feltip Paint Marker

White FPWHMC 01350Yellow FPYEMC 01351

Part No. UPC

Super Fine Metal Marker

White SFWHC 01800Yellow SFYEC 01801

Part No. UPC

Metal Marker

White MMWHC 01201Yellow MMYEC 01204

Part No. UPC

Marker A

White MAWHC 01330Yellow MAYEC 01331

Part No. UPC

Solid Paint Marker

White SPWHSC 01300Yellow SPYESC 01301

Part No. UPC

Metal Marker In A Bottle

White MBWHMC 01420Yellow MBYEMC 01421

Part No. UPC

15

Our most popular markers are now available in blister packs…Perfect for Point-of-Purchase Displays.

Silver Welder’s Pencil

Blister Package of 3 Pencils SWPC 06050

Part No. UPCOther colors available upon request.


.

Copyright 2007 – J.P. Nissen Co. Printed in U.S.A.

Since 1923

distributed by :

Newman Tools Inc.185 Iber Rd.Ottawa, Ontario, Canada K2S 1E7Tel 613-836-6776 Fax 613-836-9070


$5342)!, !2+%23 - newman tools inc. · pdf fileorange tan brown pink ... they won’t...

Documents