4. pc software export list based testing · next label a-2 200.0 m a-1 tia-568.3 ... clean the...
TRANSCRIPT
4. PC SOFTWARE eXport1. Launch eXport software.
2. Create a new project by going to [File] → [New Project] or click
3. To import saved results, go to
• [Import] → [Device] for direct USB connection or click • [Import] → [USB Flash Drive] for importing from USB flash drives
or click • [Import] → [From PC] for importing from local hard drives
4. To export saved results, go to
• [Export] → [PDF] to export selected test result(s) in summary or detail.
• [Export] → [CSV] to export selected test result(s) in summary or detail.
5. To view detailed results, double click on the cable label and a new window with comprehensive results and plots will be opened.
LIST BASED TESTINGTo load label list
1. Insert USB flash drive to the LOCAL unit.
2. Select [Label List] and select the label list you want to import.
3. Select [Copy Label Files].
4. Press the [SETUP] button → [Project Settings] → [Label Source]
5. Select [List Based Testing] and select the label that has just been imported.
6. Press the [AUTOTEST] button to view list and select label for test.
7. A PASS or FAIL result will be indicated after every test.
Encircled Flux CompliantMulti-Mode Adapter Kit
KIT CONTENTS
Multi-Mode Adapter Kit (WX_AD_EF_MM2)• A pair of Multi-Mode adapters with source wavelength of 850/1300nm• A pair of modally transparent 50/125um FC-SC simplex test cords (2m)• A pair of 50/125um SC-SC simplex test cords (2m)• Single SC-SC coupler for setting up to 2 jumpers reference• Single one-click SC cleaning kit
OPTIONAL CORD KITS• LC Connector Cord Kit• ST Connector Cord Kit
Cable Label ˅Device USB Flash Drive From PCFrom Cloud
OTDR
Other Format �
File Import Export Settings Tools Cloud Help
X eXport
Cable Label ˅PDF �
CSV �
File Import Export Settings Tools Cloud Help
X eXport
� Disconnected
Cable Label ˅New ProjectOpen ProjectSave ProjectClose Project
Recent �
Exit
File Import Export Settings Tools Cloud Help
X eXport
WireXpert4500_FiberMMEF_IT_EN_QSG_201811
Optical Loss Test KitQuick Start Guide
itnetworks.softing.com/WX4500
01-11-2018
Firmware
Export
Import
Licensing
Upgrade Firmware 8.0 #1039
Test Results
Custom Limits
Label List
Ac�vate License(s)
01-11-2018
List Based Tes�ng: Label Source Files
Copy Label Files
Demo1.lbt
Demo2.lbt
Select/Unselect Label Files
01-11-2018
List Based Tes�ng: Label Source Files
Copy Label Files
Demo1.lbt
Demo2.lbt
Select/Unselect Label Files
1 File(s) Copied
01-11-2018
Cable Label Source
None
Simple Cable Label
Template Label
List Based Tes�ng
Free Form
01-11-2018
LBT
Demo1
01-11-2018
Project Se�ngs
Site Unspecified
Operator Unspecified
Label Source Simple Label
AutoSave IO
Next Label A-2
Test Project
The product shall only be used within the conditions listed in the main manual and datasheet.Please consult the main manual and datasheet for more details.!
©2019 Softing IT Networks GmbH. In line with our policy of continuous improvement and feature enhancement, product specifications are subject to change without notice. All rights reserved. Softing and the Softing Logo are trademarks or registered trademarks of Softing AG. All other trademarks, registered or unregistered, are sole property of their respective owners.
To get in touch with us, please use our contact form on itnetworks.softing.com
3. AUTOTEST
Connect one end of test cord to WireXpert and other end to link under test on both LOCAL and REMOTE units.
Press the [AUTOTEST] button to perform a certification test.
Viewing an AUTOTEST resultSummary result of the two worst values will be displayed after an AUTOTEST. Select the [View] button to view detailed results.
Saving an AUTOTEST resultTest results can be manually saved by selecting the [Save] button. Only PASS test results will be automatically saved when Autosave is enabled or in List Based Testing mode. FAIL results must be saved manually.
TX TXRX RXLink under test
AUTOTEST
SETUP DATA TOOLS
?
AUTOTEST
SETUP DATA TOOLS
?
> TEST SETTINGS
Go to [Test Settings] → [Test Limits] → [Standard Limits] to select test limit before performing [Set Reference] or [AUTOTEST].
Enter number of connectors and splices only if there are present in link under test. Connectors used during Set Reference and AUTOTEST are automatically included when selecting 1/2/3 Jumper reference.
Selecting Cable Manufacturer
Go to [Test Settings] → [Cable] to specify manufacturer.
Select Generic SMF or Single-mode and Generic MMF for Multi-Mode if manufacturer is unknown.
Select Customized Cable to create cable with custom specifications.
01-11-2018
Test Limit
Standard Limits TIA-568.3
Network Limits
Network Limits Only IO
Length Limit (m) 2000
Cable
Cable: OM3
Manufacturer Generic MMF
Refrac�ve Index 1.493
Modal Bandwidth 500MHz*Km
Test Project
01-11-2018
Standard Limits
TIA
ISO
GB
01-11-2018
TIA-568.3
Indicate the number of connections within the Test Link, excluding the end connectors. The Reference Connections are automatically included as follows:1 Jumper - 22 Jumpers - 13 Jumpers - 0
No of Connections 0
Loss Per Connector (dB) 0.75
No of Splices 0
Loss Per Splice (dB) 0.3
Cable Loss (850nm) 3.5 dB/Km
Cable Loss (1300nm) 1.5 dB/Km
01-11-2018
850nm 0.38 dB
1300nm 0.74 dB
Locator
Next Label A-2
200.0 m
A-1
TIA-568.3
01-11-2018
850nm 0.38 dB
1300nm 0.74 dB
Locator
Next Label A-2
200.0 m
A-1
TIA-568.3
01-11-2018
Enter Label
1q
2w
3e
4r
5t
6y
7u
8i
9o
0p
@a
+s
=d
$f
%g
&h
*j
(k
)l
-z
#x
‘c
;v
:b
/n
\m
12??,
!.
A-1
itnetworks.softing.com/WX4500
1. SETUP> CONFIGURATION
Single Ended / Dual Ended
Select [Single Ended] to conduct loop-back referencing and AUTOTEST with only the LOCAL unit. Select [Dual Ended] to conduct end-to-end referencing and AUTOTEST with both LOCAL and REMOTE units.
1 / 2 / 3 Jumpers Reference Methods
Select 1, 2 or 3 Jumpers reference method depending on requirement. Test cords provided in the kit can perform up to 2 jumpers set reference.Additional test cords are required to perform a 3 jumpers set reference.
Single / Bi-Directional Testing
Select [Single Direction] for test to be conducted only from LOCAL TX to REMOTE RX on Fiber 1 and REMOTE TX to LOCAL RX on Fiber 2 (step 1).Select [Bi-Direction] for test to be conducted from LOCAL to REMOTE and REMOTE back to LOCAL on both Fiber 1 and Fiber 2. Swapping of connections during AUTOTEST is required (step 2).
> PROJECT SETTINGS
SiteCreates folder for AUTOTEST results to be saved into.
OperatorCreates display name for operator handling unit.
Label SourceCreates labeling scheme for saved AUTOTEST result.Select NONE to manually enter AUTOTEST result label when saving.Select LIST BASED TESTING for pre-configured labels created with eXport PC software.
AutoSaveEnable option for WireXpert to auto save every PASS result. Option will be enabled for List Based Testing.
01-11-2018
Configura�on
Single Ended Dual Ended
Single Direc�on
Bi-Direc�on
01-11-2018
Project Se�ngs
Site Unspecified
Operator Unspecified
Label Source Simple Label
AutoSave IO
Next Label A-2
Test Project
2. SET REFERENCE1. Clean the adapters and test cords with the cleaner provided in the kit.
2. Depending on the reference method selected, follow the diagram on WireXpert to set up Set Reference using test cords provided in the kit.
3. Check that the units are connected.
4. Click the [Next] button to set reference.
5. Check the Set Reference values are between -3 and -9 dBm for both Single-mode and Multi-mode.
6. Perform verification test if performing 1 jumper reference method. Refer to User Manual for more information.
Single Mode (SM)
Multi Mode (MM)
Encircled Flux MM (MMEF)
Set Reference -3 to -9dBm -18 to -20dBm
Verification Test 0.2dB 0.1dB