4 constructive tips to buy a premium heat pump for your home
DESCRIPTION
Ground Source Contractors, Inc. can not only install and service your WaterFurnace system, but we can also install the interior and exterior looping. Geothermal heating and cooling is very cost effective because it uses energy so efficiently.TRANSCRIPT
4 Constructive Tips to Buy a Premium Heat Pump for Your Home
If you have made a decision to buy a heat pump, then you might be confused
which one to select. These days, there are different types of heat pumps available
in stores or on the internet; you just have to check out the complete information
about these devices in order to get the best one. Following are the four tips that
will help you in buying a premium heat pump Bucks County for your home. Here
they are:
1. Kind:
There are air-source units and geothermal units and both are useful. But,
geothermal units are more costly, because they save energy. Installation of these
pumps is harder, and they are not suitable for all houses. The best initiative is to
ask an expert that which type of device is best for your home.
2. Size:
This is the most significant thing to ponder, because this will decide the capacity
of the item to supply warm air all through the house. An inefficiently sized unit
will produce warmness in less quantity, and it is not useful for your home. It is
recommended to use a one ton heat pump for every 400 square meter of an area
in your house. In addition, the larger the house, the bigger the device will be
required.
3. Cooling and Heating Effectiveness:
This is mainly the amount of warmness or cold that is generated by the unit for
every watt of energy used. As heat pumps are effective, so they have to fall in a
declared amount of effectiveness given by the National Renewable Energy
Laboratory. For the Heat Seasonal Performance Factor (HSPF), it must be
approximately 8 to 10 for the device to become efficient in the warm. For the
cooling effectiveness the Seasonal Energy Efficient Ratio (SEER) of the unit has to
be about 14 to 18.
4. Duct Work:
Examine how the air will be distributed. Normally, house owners choose several
ducts which are located in different rooms to supply the air. You should check this
thing before installation, because an ineffective layout of the duct will not
generate energy efficiency. If possible, an expert must examine the layout of the
duct, and if compulsory, get it changed.
Obviously, the above-mentioned tips are not the only things that you should
consider while purchasing a heat pump for your home, but if you keep them in
your mind; you will not only be able to get a high- quality unit, but also be able to
utilize it for a long period of time.