3m guideline- marzo 2009comunitel.com.ar/micrositios_contents/24arc_guideline.pdf · ftth guideline...

FTTH GuidelineFirst Edition

Soluciones InnovadorasYour Broadband Deployment Partner

Cables óptcosCable FRP Cable Low FrictionBend Insensitive Optical Fiber Cord

Conectores mecánicosFA Field Assembly ConnectorFAS Field Assembly Connector SmallTLC Tool Less ConnectorOutlet SlimOutlet Face PlateNPC No polish Connector SCNPC No polish Connector LC

Empalmes mecánicosFibrok II 2529 Universal Mechanical SpliceFibrlok Holder 2539 Fibrlok 2540G Fibrlok Angule splice

SplittersSplitters PLC

Cajas de DistribucciónPBPO Syze 1PBPO 6-12FTBBTINPC 86X86Outlets SLIMOutlet Face Plate

Cierres para empalmes

New Fiber dome FDC 10SNew Fiber dome FDC 08SNew Fiber dome FDT 08

SLIC 530

PBEO 1PBEO 2PBEO 3

Indice

This specification covers the design requirements and performance standards for the supply of bending insensitive, low water peak, single-mode optical fiber and tight jacket Indoor FRP cable. The features described in this document are intended to provide information on the performance of 3M optical fiber cable and aid in handling and installation.

This specification describes the indoor and outdoor fiber cable--FRP cable. The cable contains 1 or 2 single-mode optical fibers.

3M™ FRP Cable Indoor and Outdoor For Networks FTTH

ConstructionCore material: Germanium doped Silica glassCladding material: Silica glassMold field diameter at 1310nm 8.9±0.4µmMold field diameter at 1550nm 9.9±0.5µmCladding diameter: 125±0.7µmCoating material: UV curable materialCoating diameter: 250±10µm

Optical CharacteristicsAttenuation at 1310nm: ≤0.36dB/kmAttenuation at 1550nm: ≤0.22dB/kmAttenuation at 1625nm: ≤0.20-0.23dB/kmChromatic dispersion at 1550nm: ≤+18ps/km/nmZero dispersion wavelength: 1300-1324nmZero dispersion slope: ≤0.092ps/(nm2.km)Macro bending loss at φ30mmx10loop,λ＝1550mm: ≤0.05dBMacro bending loss at φ20mmxloop, λ＝1550mm≤0.15dBMacro bending loss at φ15mmxloop, λ＝1550mm≤0.5dBCut-off wavelength (φcc): ≤1260nm

Indoor Cable Construction

Outdoor Cable Construction

FRP Strength Member Cable ConstructionNumber of core: 1/2Strength member material: KFRPStrength member diameter: 0.5mmStrength member number: 2Sheath material: Flame retardant polyethylene (LSZH)Sheath color: Black (Or appointed by Customer)Indoor Cable Diameter: 2.0±0.2mm, 3.1±0.2mmOutdoor Cable Diameter 2.0±0.2mm, 5.3±0.2mmCable Weight (Indoor) 7.1kg/kmCable Weight (Outdoor) 15.6 kg/km

Cable Mechanical Characteristic:Attenuation at 1310nm: ≤0.40dB/kmAttenuation at 1550nm: ≤0.30dB/kmTensile strength: 60/30 N (without messenger wire)(Long-term/Short-term) 200/600N (with messenger wire)

1000N/100mm (Short term YD/T 1258.3)300N/100mm (Long term YD/T 1258.3)

Side force performance: 1940N/10cm 1min (IEC60794-1)

Crush resistance:

Coating Color:

Each fiber shall be identifiable throughout the length of the cable in accordance with the following color sequence:

Fiber No Color1 Blue2 Yellow

Stock Number Description UnitXS003871125 1core KFRP Optical Fiber EXP Drop Cable(Indoor) KmXS003871133 2core KFRP Optical Fiber EXP Drop Cable(Indoor) KmXS003873907 1core KFRP Optical Fiber EXP Drop Cable(Outdoor) KmXS003873899 2core KFRP Optical Fiber EXP Drop Cable(Outdoor) Km

Reference:ITU-T G.657A, IEC60794-1

Cable de Interior con baja fricciónNo requiere sistema de guiado para su canalización.Mas delgado que los cables tradicionales, lo que permite un ahorro de espacio o mayor densidad de cables en un espacio dadoIdeal para ser utilizado en ductos copados

3M™ FRP Cable Indoor Low friction For Networks FTTH

ConstructionCore material: Germanium doped Silica glassCladding material: Silica glassMold field diameter at 1310nm 8.9±0.4µmMold field diameter at 1550nm 9.9±0.5µmCladding diameter: 125±0.7µmCoating material: UV curable materialCoating diameter: 250±10µm

Optical CharacteristicsAttenuation at 1310nm: ≤0.36dB/kmAttenuation at 1550nm: ≤0.22dB/kmAttenuation at 1625nm: ≤0.20-0.23dB/kmChromatic dispersion at 1550nm: ≤+18ps/km/nmZero dispersion wavelength: 1300-1324nmZero dispersion slope: ≤0.092ps/(nm2.km)Macro bending loss at φ30mmx10loop,λ＝1550mm: ≤0.05dBMacro bending loss at φ20mmxloop, λ＝1550mm≤0.15dBMacro bending loss at φ15mmxloop, λ＝1550mm≤0.5dBCut-off wavelength (φcc): ≤1260nm

2,0 mm

1,6 mm

2,0 mm

1,6 mm

Cable Mechanical Characteristic:Attenuation at 1310nm: ≤0.40dB/kmAttenuation at 1550nm: ≤0.30dB/kmTensile strength: 60/30 N (without messenger wire)(Long-term/Short-term) 200/600N (with messenger wire)

1000N/100mm (Short term YD/T 1258.3)300N/100mm (Long term YD/T 1258.3)

Side force performance: 1940N/10cm 1min (IEC60794-1)

Crush resistance:

Indoor Cable Construction

•HOLE Assisted Fiber (HAF)is the ultimate bend insensitive fiber.

•HAF Fiber/cord DOES NOT have any detectable bend loss unless fiber is broken.

•HAF patch cords have been applied for wiring between outlet and ONT in house.

3M™ Bend Insensitive Optical Fiber CordFor Networks FTTH

3M Bend Insensitive Optical Fiber Cord

New SC Compatible Connector with Shutter

A new SC compatible connector features a spring-loaded shutter which protects the connectorferrule from dust and locks in laser beams.

The sutther closes automatically as the connectoris disconnected.

HAF CABLE SIZE DESIGNED for MIN BEND CONSTRAINT

. Ben loss does not constrain HAF cord size because of extremely low bending loss.

.4mm /1.7mm patch cord with 2.5mm minimum bend radius.

.The most bendable Bendig Insensitive Fiber (BIF) / Bend Optimized Fiber (BOF)

Everybody can handle like electrical cord!

Structure Bending loss is below 0.01 dB at wavelengeth of 1,625 nm even

if the bending diameteris 5mm and with 10 turns.

3M brand Field Assembly connectors (Plug and Socket) are used for various applications, at out side or indoor in access network and premise market. Following picture shows variety application in Japan market and connector line up. FA series products, FA-SC connector, FA Plug and socket, FA straight socket are widely used in wall cabinet, rosette, outlet and ONU at both indoor and outdoor. FAS plug and socket are designed for small size and outdoor, especially at aerial closure as replacement of fusion and mechanical splice fiber joint.

3M™ Field Assembly ConnectorFor Networks FTTH

FA and FAS connector inside structure is as follows. Pre-assembled ferrule by factory assure the performance of Super Physical Contact (SPC) and the fiber of FRP drop cable is connected to stub fiber in the element. 125um bare fiber and 250um coated buffer is connected and hold in Al-element.

3M Field Assembly Connector

• Fiber of Drop cable and stub fiber are contacted in the element.

• Connector installation does not need polish process in a field.

FA and FAS series Field Assembly Connector inside Structure

Actuation and Fiber Grip Mechanism

FA-SC (Field Assembly - SC) connector is designed for Single Mode (SM) Fiber and connected to FRP drop cable or indoor cable. FA-SC Connector has the interoperability ofconventional SC connector and can be connected to SC connector by coupling or FA Socket directly. This connector has Super Physical Contact (SPC) polished ferrule at manufacturing with fiber in ferrule inside (fiber stub) and it can be connected to a fiber of FRP drop cable orindoor cable in Al-element inside which is covered by index matching gel. Actuation Tool is designed for simple and easy to use with high success rate of field termination. This tool is a free tool, 1 tool is attached in 10 connectors/per box.

3M FA-SC Connector

FA-SC connector

Actuation Tool

Faceplate application

Benefit and FeatureFeatures Benefits

Always the right cable length with no excess to store.Provides optimum inventory management.

Zirconic ceramic Ferrule connector Mates with standards SC couplingFactory polished stub in ferrule No on-site polish or adhesives requiredStandard connector size Fits in small form factor termination box and wall outletsSimple termination tool Low initial cost and allow all installation crews to be equipped with a set

Quick installation and minimize labor cost.Minimal training required

Few steps installation procedures

Field installation

SpecificationsItems SpecificationsDimensions Approximately 50 (L) x 11 (W) x 9 (H) mmFiber Diameter/Coating Diameter 125um bare fiber/250um buffer coatOperational temperature -40C to 70C (-40F to 158F)Insertion Loss < 0.5dB vs. SC Master at 1,310nm

< 0.7dB vs. SC Master at 1,550nm<-40dB at room temperature

Splice strength <0.2dB at 10N

Return Loss

Order Information:

Stock Number DescriptionJE420083618 8801 FA-SC PLUGJE420082040 8811-FH FIBER HOLDERJE420082057 8811- ST STRIPPING TOOL

FA-SC TLC enables fast, on-site installation of FRP drop cable or indoor cable without separate actuation tool. Actuation cover is build-in on connector. Improved cable holder has the outside latch, so installer can re-connect to FRP cable when they need. More simplified fieldtermination will contribute higher success rate in a field. Orange colored cable holder has a re-open function to allow to re-termination of flat FRP cable. Performance of FA-SC connector is a same as current FA-SC connector with high reliability and easy to use.

3M FA-SC Tool Less Connector (TLC)

FA-SC TLC Connector

Connected with FRP cable

Features BenefitsAlways the right cable length with no excess to store.Provides optimum inventory management.

Zirconic ceramic Ferrule connectorMates with standards SC couplingFactory polished stub in ferrule No on-site polish or adhesives requiredStandard connector size Fits in small form factor termination box and wall outletsSimple termination tool Low initial cost and allow all installation crews to be equipped with a set



Field installation

Features & Benefits:

Items SpecificationsDimensions Approximately 50 (L) x 11 (W) x 9 (H) mmFiber Diameter/Coating Diameter 125um bare fiber/250um buffer coatOperational temperature -40C to 70C (-40F to 158F)Insertion Loss < 0.5dB vs. SC Master at 1,310nm

< 0.7dB vs. SC Master at 1,550nm<-40dB at room temperature


Return Loss

Specifications:

Order Information:

Stock Number DescriptionJE-4200-8591-0 FA SC Connector Tool Build-in

FA Plug and Socket connector are designed for Single Mode (SM) Fiber and connected to FRP drop cable or indoor cable. FA Socket Connector has the interoperability of conventional SC connector and can be connected to SC connector directly. FA Socket connector has SuperPhysical Contact (SPC) polished ferrule at manufacturing with fiber in ferrule inside (fiber stub) and it can be connected to a fiber of FRP drop cable or indoor cable in Al-element inside which is covered by index matching gel. L shape of FA Socket connector need to use with R15mm, bent insensitive fiber, ITU-T Recommendation G.652D or G.657A due to R10mm ending in connector. Actuation Tool is designed for simple and easy to use with high successrate of field termination. This tool is a free tool, 1 tool is attached in 10 connectors/per box.

3M FA Socket





Field installation


Specifications:

Items SpecificationsDimensions Approximately 42 (L) x 31 (W) x 10 (H) mmFiber Diameter/Coating Diameter 125um bare fiber/250um buffer coatOperational temperature -40C to 70C (-40F to 158F)Insertion Loss vs. SC Master < 0.5dB vs. SC Master at 1,310nm

< 0.7dB vs. SC Master at 1,550nm< 0.7dB with FA Plug random at 1,310nm< 0.9dB with FA Plug random at 1,550nm


FA Socket 8811-LSC

3M FA Socket

Order Information:8811-LSOFaceplate

application

FA Plug & Socket

8811-SS FA ST SOCKET 8811-PLUG

Stock Number DescriptionJE-4200-8048-1 8811-PLUG FA Connector PlugJE-4200-8049-9 8811-LSC CABINET SOCKET Socket for CabinetJE-4200-8050-7 8811-LSO OUTLET SOCKET Socket for OutletJE-4200-8360-0 8811-SS FA ST SOCKET Socket

FA Connector Plug and Socket

FAS plug and socket are designed for small size and outdoor, especially at aerial closure as replacement of fusion and mechanical splice fiber joint.

3M FAS Connector Plug and Socket





Field installation


FAS Plug and Socket

Stock Number DescriptionJE-4200-8353-5 FAS Connector PlugJE-4200-8354-3 FAS Connector Socket for Drop CableJE-4200-8355-0 FAS Connector Socket for 250 um Fiber

Order Information:

FAS Plug and Socket

3M Tool-less connector (TLC) enables fast, on-site instillation of 3mm jacketed single mode fiber withoutany additional installation tool. Built-in tool into the body makes the most comfortable installation procedurein the field for 3mm jacket cable. The TLC provides excellent cable pullout strength in Premise and FTTP environment. In addition, the TLC could be reusable without any additional parts so it could maximize success ratio of field installation.

3M 8802-TLC/3 Tool-less Connector Single Mode SC 3mm Jacket

8802 TLC

Feature & Specification :

Stock Number Description80-6113-3035-0 8802-TLC/3 Tool-less Connector SC SM 3.0 mm Jacket

Features BenefitsApplication FTTHProducts Tool-less Connector, SC, Single Mode, 3.0 mm JacketFiber & Cable 125 um fiber, 250/900 soft buffer coating, 3 mm drop cableDimensions 57.4 (L) x 9.3 (W) x 9.3 (H) mmFeature Always the right cable length with no cable slack to store

Fast, easy installation at any placeRe - usable capability to maxiize the success ratio of installation

Performance Insertion Loss < 0.5 dB at 1,310/1,550 nm to Master SCReturn Loss < - 40 dB at 1,310/1,550 nm in Room TemperatureCable tension (in service) <0.2 dB at 50 N Typ.

Operational Temperature - 40 to 75 C (-40 to 167 F)

Order Information:

Tools

Fibrlok 2529 was designed for spice any combination of 250µm to 900µm coated fibers. It utilizes a simple assembly or spice tool and easy ‘strip, clean, cleave and splice’procedure requiring minimal product training.

Fibrlok 2529 also provides a single cleave length for 250µm and 900µm coated fibers. It is an ideal solution for both permanent and restoration spice applications.It utilizes a metallic spice element held inside a molded plastic body and cap.

The splice insertion loss averages should be less than 0.10 dB. Fiber retention is greater than one pound minimum. The splice displays superior thermal stability, delivering stable performance from -40°C to +80°C (-40°F to +176°F).The Universal Mechanical Splice can be used with either single-mode or multimode fibers with a (nominal) glass cladding diameter of 125 microns.The splice is suitable for utilization in aerial, buried, underground or pedestal; outside plant or inside building applications.

Fibrlok 2529 and Splice Tool

3M™ Fibrok II 2529 Universal Mechanical SpliceFor Networks FTTH

Features & Benefits

Items DescriptionsFiber diameter 125µmCoating diameter 250µm or 900µmShelf life 30 yearsMean insertion loss <0.1 dB

<-35 dB from -40°C to 80°C (-40°F to 176° F)<-55 dB typical from -40° to 80° C when used with 2 650-ACK2 Cleaver Adapter<-60 dB typical at room temperature

Tensile strength 4.4N (1.0 lb.) minimum; 13.2N (>3.0 lbs.) typicalMaterial Engineering thermoplastic with aluminum alloy element; UL 94, V-O ratingOperating temperature -40°C to 80°C (-40°F to 176°F)Thermal cycling Change in insertion loss <0.5 dB, -40°C to 80°C (-40°F to 176°F)Fungus resistance ASTM G-21-70; rating 0Vibration IEC 61300-2-1 (EIA standard FOTP-11; test condition 1)

Seven days @ 43°C; change in insertion loss 0.05 dB; 21,000 hours with <0.2 dB change

Reflectance

Water immersion

Order Information:

Stock Number Description80610755896 2529 FIBRLOK II UNIVERSAL OPTICAL FIBER SPLICE (250 X 900)80610581870 2501 FIBRLOK ASSEMBLY TOOL

3M Fibrlok II splice/holder integrates the 3M FibrlokII splice 2529, actuation tool, and holder all in one package. It enables fast, on-site installation without a separate assembly tool or splice tray. Designed for restoration of broken fiber and the final Fiber-to-the-Premise (FTTP) drop connection, it can be easily used with single mode or multimode fibers with 250µm or 900µm tight buffer.*Clamps on each side of the splice provide strain relief for the 900µm tight buffer for long-term stability and reliability. Very high bond tape on the bottom of the splice/holder permanently holds it at the splice location, which is especially useful at optical network terminals.

3M™ Fibrlok Holder 2539 (For 250µm and 900µm Fibers)

Fibrlok Holder 2539

Features & BenefitsFeatures BenefitsIntegrated splice, holder & actuator No need for separate tray or actuation toolPush button actuation Easy splice operationBuffer clamps Provide 900µm fiber strain reliefFoam retention pad Used for 250µm fiber spiceAdhere with VHB tape Flexible placement within terminal box

Specifications:Features BenefitsDimensions 12.9mmW x 12.0mmH x 66mmL (0.5”x 0.5”x 2.6”)Fiber Diameter 125µmCoating Diameter 250µm or 900µm Tight BufferOperating temperature -40ºC to 75ºC (-40ºF to 167ºF)Mean Insertion loss < 0.1dBReturn loss < -40dB Typical

Order Information:Stock Number Description80611320054 2539 FIBRLOK II FIBER SPLICE HOLDER ASSEMBLY

The mechanical spice enables fast, easy splice of 250µm single-mode fiber in FTTH installations. It can also be used in multimode LAN installations where 250µm coated fiber is spliced. This low-loss and reliable splice can be installed by non-specialized technicians.

After the fiber is inserted, the assembly tool depresses the cap to align and lock the fibers in place.

The simple, rugged spice tool is inexpensive and portable. It requires no electrical power and can be used in any environment. Several crews can be equipped for less than the cost of a single fusion splicer. The compact tool can be handheld and can be used while on a ladder or standing on the side of a house. No work surface is required.

3M™ Fibrlok 2540G Compact 250 Micron Mechanical Splice

Fibrlok 2540G and Spice ToolCross-sectional View of an Actuated Splice

AfterActuation

BeforeActuation

Specification:

Features DescriptionsHand held tool Splice anywhereSmall size Fits in many fusion splice traysSimple and easy to use Minimal training, quick install and lower installation costFiber Type 125µm fiber, 250µm coatingWavelengths 1310nm, 1490nm, 1550nm, 1625nmMean Insertion loss <0.1dB mean (1310nm)Reflection <-40dB typicalPull out strength 4.4N (1.0 lbf)Dimensions 4mm x 4mm x 36mm (0.16”x 0.16”x 1.42”)Operating temperature -40ºC to 75ºC (-40ºF to 167ºF)

Order Information:

Stock Number Description UnitJE420083170 2540G FLOK 250UM SPLICE EAJE420085381 2540G FLOK 900UM SPLICE EAJE420083188 2540G FIBRLOK 205UM ASSEMBLY TOOL EA

3M™ Optical Passive splitterFor Networks FTTH

3M planar light circuit (PLC) splitters are fully passive optical branching devices that exhibit uniform signal splitting for the most advanced optical networks. These planar silica waveguide devices are packaged in small form factor housings to offer compact management into 3M models and splice trays. Bend insensitive, reduced water peak single-mode fiber is used to assure low bending loss in applications which require tight radius or significant handling by the technician. These splitters are manufactured and tested to GR-1209/1221 to provide the high performance and reliability needed in the outside plant environment.Applications for the PLC splitters include all FTTH network architectures (GPON, BPON,EPON), CATV and data communications.

Splitter Versions:3M can provide 3 types of splitter with different encapsulation250µm fiber outputs version900µm fiber outputs version2mm fiber outputs ruggedized version

Splitter of 250µm and 900µm outputs

Ruggedized Splitter of 2mm fiber outputs

3M™ PBO Syze 1 For Networks FTTH

Terminal de distribución de fibra

óptica con capacidad de hasta 36

empalmes y 16 cables drop de

entrada.

Para ser utilizado en exterior como

en interiores de edificios, permitiendo

la continuidad del cable principal.

Capacidad máxima de 3 bandejas,

permitiendo alojar hasta 36

empalmes.

Dimensiones L: 270 x W: 240 x H:80

Capacidad max. 36 empalmes

Nivel de proteción IP43

Puertos de entrada 16 puertos

Capacidad de bandejas 12 fusiones, 10 mécanicos, 3 splitters

3M™ FTB For Networks FTTH

CTB-FTB box

• Dimension: 130mmx190mmx45mm (LxWxH)• Material : Polycarbonat• Gasket material: EPDM• Base colour: RAL7035• Cover colour: RAL7035• Working Temperature :• Short term : -40–120 oC• Long term: -40-80 oC• UV resistance: UL508• Flammability Rating: UL94 5V• IP rate: 54• Impact Resistance: IK 0

3M™ PBPO 6-12 For Networks FTTH

3M™ BTIFor Networks FTTH

• Suitable product for both indoor as well as outdoor applications• Sliding lid• 1 Fiber spice tray• Customer Fiber cable strain relief with cable tie• Locked lid by security lead• Building Fiber distribution cable running behind box• One product to address several applications• High density termination point for Fiber floor termination• Capacity up to 4 splices• No building Fiber distribution cable diameter restrictions• Dimensions : 95x90x43mm (LxWxH)• Color: Light grey Ral 7035• Material: Thermoplastic• Environmental protection (EN 60 529) IP 54 / IK08

3M™ 86x86 Face plateFor Networks FTTH

3MTM 86x86 NPC faceplate is last evolution of 86 faceplate series for FTTH end user installation. 86x86 Face plate is designed to match with new generation of Field Assembly Connectors like 3M NPC, FA-SC and RJ45 connectors. Field Assembly Connector and 86x86Face plate avoid installing bare fiber storage tray and spice. This configuration allows obtaining similar dimensions than electrical and telephone outlets already installed. 3MTM86x86 Faceplate is compatible with round and FRP indoor drops with 30 mm bending radius.Faceplate is equipped with four SC ports and 1 RJ45 copper port.

Specifications

• Cable entry ports on back and lateral side• 4 SC + 1 RJ45 connectors capacity• D2mm,4mm or 5mm indoor cable application• 2mmx3mm FRP cable application• 4 ea 3M NPC or FA-SC connector application.• 2 ea 3M Fibrlok 2540 (mechanical spice).• Box dimension: 86Lx86Wx33H(mm)• Wall mounted indoor application• Working temperature: -10oC --+60oC

Roseta para ser usada en cables de fibra óptica, para ser instalada sobre la superficie.

Contiene seguro trabador para proteger conector.

Conector FA Plug

Dimension: W100xH65x D14.8mm.

Material : Polycarbonat

Gasket material: EPDM

Base colour: RAL7032

Cover colour: RAL7032

Working Temperature :

Short term : -40–120 oC

Long term: -40-80 oC

UV resistance: UL508

Flammability Rating: UL94 5V

IP rate: 43

Impact Resistance: IK 08

3M™ Outlets SLIMFor Networks FTTH

Roseta para ser usada en cables de fibra óptica, adaptándose a las cavidades de las redes empotradas. Walloutlets.Fabricada especialmente para ser usada con conector FA Socket.Contiene seguro trabador para proteger conector.

Dimensiones:

W120xH69x D7mm. (medidas en superficie exterior)

FA Socket 8811-LSC

3M™ Outlets Face PlateFor Networks FTTH

3M™ PBEO S1 With 12 TRAY ORGANISER

3M is a trademark of 3M Company.

Important NoticeAll statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, butthe accuracy or completeness is notguaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force oreffect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty; Limited Remedy; Limited Liability.This product will be free from defects in material and manufacture for a period of 12 months from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUTNOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether indirect, special, incidental or consequential regardless of the legal theory asserted.

Communications Markets Division3M Telecommunications6801 River Place Blvd.Austin, TX 78726-9000800/426 8688Fax 800/626 0329www.3MTelecommunications.com

3m guideline- marzo 2009comunitel.com.ar/micrositios_contents/24arc_guideline.pdf · ftth guideline...

Documents