3d map model making

11
3D MAP MODEL MAKING Session given by Minnie Griswold Tuesday May 4, 2010 Learn how to create and construct a 3D model of the Anoka Ramsey Community College- Cambridge Campus area out of cardboard! You will need: Lots of cardboard, a topographic map, an X-acto knife, paint, glue, permanent marker, scissors, a pencil, and band-aids might be needed. ???

Upload: harry

Post on 04-Feb-2016

52 views

Category:

Documents


1 download

DESCRIPTION

???. 3D Map Model Making. Session given by Minnie Griswold Tuesday May 4, 2010 Learn how to create and construct a 3D model of the Anoka Ramsey Community College-Cambridge Campus area out of cardboard! - PowerPoint PPT Presentation

TRANSCRIPT

Page 1: 3D Map Model Making

3D MAP MODEL MAKINGSession given by Minnie Griswold

Tuesday May 4, 2010Learn how to create and construct a 3D model

of the Anoka Ramsey Community College-Cambridge Campus area out of cardboard!

You will need: Lots of cardboard, a topographic map, an X-acto knife, paint, glue,

permanent marker, scissors, a pencil, and band-aids might be needed.

???

Page 2: 3D Map Model Making

STEP ONE: COLORING THE LINES Use crayons to color code the lines of depth.

This way it will be easier to determine which line to cut when creating your pieces.

Page 3: 3D Map Model Making

STEP TWO: CUTTING ALONG THE LINES Next along the same colored line with as

much precision as possible.

STEP THREE: TRACING Then trace the piece that you just cut out

onto a piece of card board.

Page 4: 3D Map Model Making

STEP FOUR: CUTTING THE CARDBOARD With the Xacto-knife, CAREFULLY, cut the pencil

marked shape you traced on the cardboard. Take your time because this the most tedious process.

Page 5: 3D Map Model Making

STEP FIVE: CLEANING UP THE CUT

With a scissors trim away the unwanted pieces on the edges of the piece you just cut. This will give you a more clean edge to work with.

Page 6: 3D Map Model Making

STEP SIX: STACKING Place the

piece of cardboard that you just cut on top of the base of the map and the other pieces you’ve cut before. Repeat steps 2-6 until you have created all the pieces.

Page 7: 3D Map Model Making

STEPS SEVEN: GLUING THE PIECES Place lines of glue on the back of the pieces

of cardboard and then place on top of one another. This will hold the pieces together.

Page 8: 3D Map Model Making

STEP EIGHT: PAINTING

Using any kind of paint ( I used nail polish) indicate where the Rum River is locating by brushing on blue paint.

Page 9: 3D Map Model Making

FINAL STEP: ADDING THE FINAL DETAILS Locate where Highway 95, the Anoka-Ramsey

CC is located. Also show where some swamp and marshes are located. Label where any major local icons are using permanent markers or paint.

Page 10: 3D Map Model Making

CONGRATULATIONS!!! Your local map is finally complete! Good work!

Page 11: 3D Map Model Making

PHOTO SOURCES http://www.simply-boxes.co.uk/

NewsEngineer.asp?page=9043 http://

howtostartacandlemakingbusiness.com/make-candles-from-crayons.html

http://afod.wordpress.com/2009/01/ http://www.crestock.com/images/870000-

879999/878275-xs.jpg http://210teenlibrary.files.wordpress.com/

2009/07/fireworks.jpg http://profalbrecht.files.wordpress.com/

2009/05/happy-face.gif