3/8" d rive s ocket s ets
TRANSCRIPT
LIMITED LIFETIME WARRANTY
The Stanley Works and Proto Industrial Tools (collectively referred to as “TSW/Proto”) warrants any of its manufactured products for the useful life of the product against deficiency in material or workmanship.
Torque Wrenches, Multipliers and Testers are warranted for one year, except for calibration which is warranted for 90 days from date of purchase. Torque products can be repaired and recalibrated for a nominal charge at the Stanley-Proto® Authorized repair center (2195 East View Parkway, Suite 103, Conyers, GA 30013). Defects in material or workmanship will be repaired or replaced at no cost, all other repairs will be at a nominal charge. Torque products areprecise measuring devices that require care in handling. Stanley-Proto® recommends that all micrometer wrenches berecalibrated once a year or more, depending on usage.
Disclaimers and limitations:• Is subject to the disclaimers and limitations described below and is in lieu of all other warranties, express or implied,
including the implied warranty of merchantability or fitness for a particular purpose.• Gives you specific legal rights. You may also have other rights that vary by state.• Does not extend to products that have been improperly used, altered, or repaired by any entity other than TSW/Proto.• Does not extend to any claim for incidental, consequential, or special damages. Some states do not allow the
exclusion of limitation of incidental or consequential damages, so this exclusion may not apply to you.• TSW/Proto makes no representations beyond those contained in this Limited Lifetime Warranty.• Agents of TSW/Proto have no authority to make representations of any sort beyond those contained in this Limited
Lifetime Warranty.
Exclusive remedy and claim procedure:• The exclusive remedy under this Limited Lifetime Warranty for products determined to be deficient in materials or
workmanship by TSW/Proto is repair or replacement with a reconditioned tool of equal value by TSW/Proto.• The selected remedy is at the sole discretion of TSW/Proto. In no event shall TSW/Proto be responsible for more than
the original purchase price of the product.
Questions:To ask questions about, or to make a claim under this Limited Lifetime Warranty, contact your Stanley-Proto TerritoryManager or a Manufacturer’s Representative.
Products in this catalog may not be available in all countries.
BlackhawkTM by Proto® Tools meet applicable industry standards.
BlackhawkTM by Proto® reserves the right to claim exceptions to specific requirements within any given standard.
intro 6/29/05 11:09 AM Page II
TABLE OF CONTENTS
INTRODUCTION.........................................................................................III-VTOOL STORAGE............................................................................................1-6MASTER SETS............................................................................................7-50COMBINATION SOCKET SETS..............................................................51-96SOCKETS & ACCESSORIES..................................................................97-120WRENCHES...........................................................................................121-136RATCHETING WRENCHES..................................................................137-144SCREWDRIVERS, NUT DRIVERS, HEX KEYS & BITS.....................145-152PLIERS....................................................................................................153-158HAMMERS, CHISELS, PUNCHES & PRY BARS..............................159-164PULLERS................................................................................................165-170MISCELLANEOUS................................................................................171-180TOOL BOARDS..................................................................................... 181-202HAND TOOLS....................................................................................... 203-217INDEX.....................................................................................................218-236
It’s 2 a.m. and you’re alone trying to get a school bus back into the motor pool for the
next day’s route. Or it could be that the boiler is out on a 20-degree day, and you’re
about an hour from having frozen pipes. Regardless, it all comes down to two things:
you and the tool in your hand.
Since 1945, Blackhawk has manufactured the mechanical and industrial
tools workers depend on in tough situations. Now, as a Stanley® Proto®
line, we’ve taken our commitment to reliability even further, broadening
our catalog of tools into a complete, competitively priced line that includes
the most popular sizes and sets for automotive, light industrial and
maintenance use.
BlackhawkTM by Proto® tools are tools you can count on to work when all thatseems to be working is you.
intro 6/29/05 11:09 AM Page III
All ratchets feature a high-polish finish.
The BlackhawkTM by Proto® line is more than just reliable. It’s also complete. Currently, our line
includes more than 1,300 items that cover most automotive, light industrial and maintenance
applications. Compare BlackhawkTM by Proto® features to our competitors,
and you’ll agree – we make it easy to afford high-quality tools.
Complete line of more than 400items, including extensions and other accessories.
Polished nickel chromefinish resists corrosion.
Sockets are machined to prevent fastener rounding.
Ratchets are geared for short, powerful swing arcs.
Contoured handle is comfortable and designed to prevent slippage.
Blackhawk™ by Proto® finishes. A reflection of quality.
Blackhawk™ by Proto® tools are polished to asatin or high-polish finish. This helps resistcorrosion and makes cleaning tools easier.
intro 6/29/05 11:09 AM Page IV
Precision machined ends fitsnugly onto fasteners.
Every BlackhawkTM by Proto® tool is backed by a limited lifetime warranty that covers manufacturer and material defects of any kind.
Long shank providesadded leverage.
Slim profile helps reach intotight areas.
� Automotive repair
� Fleet maintenance
� Light-duty industrial
� Property maintenance
� Machinery repair
BlackhawkTM by Proto® tools are ideally suited to automotive, light industrial and
maintenance applications.
Tool Storage
Socket Sets
Drive Tools,Sockets
andAccessories
Wrenches
Pliers andScrewdrivers
Hammers,Punches
and Chisels
Automotive and Specialty
Tools
Heavy-duty top chests and rollercabinets in 13 of the most commonsizes and drawer storage configurations.
Master sets and Drive sets in a variety of piece-counts, rangingfrom 11-piece Standard Drive to
a 1,050 piece Master Tool Set.
Over 600 individual items in a variety of finishes and drive sizes engineered for the mostdemanding of applications.
Everything from adjustable toopen-end, combination and ratcheting wrenches in over 300 sizes and finishes.
Includes our best-selling pliers and screwdriver profiles designed for everyday applications.
A broad line of rubber mallets, soft-face and ballpein hammers,chisels, punches and pry bars.
Pullers, feeler gauges, magnetictools, wire brushes, and other shop must-haves.
intro 6/29/05 11:09 AM Page V
1-1/4" Combination Wrench with full-polish corrosion-resistant finish. 17" long. Limited Lifetime Warranty. Made in the USA. 1-800-800-TOOL or www.stanleyproto.com
intro 6/29/05 11:09 AM Page VI
Heavy gauge steel construction with recessed drawers to keep drawer handles flush with front. Ball-bearing drawer
slides have 100 lb capacity for heavy loads, full extension for easy access to complete drawer contents and quick
release ball-bearing track slide for easy drawer removal. All roller cabinets and top chests come in high gloss black
finish and have keyed locks for security.
Top Chests Feature:• Full width lid hinge
41" and 54" wide models:• Gas shocks for top lid
27" wide models:• Locking lid stays• Painted side chest handles
Gas lid springs
Heavy duty casters
Ball bearing drawer slides
Tubular steel handle
TOOL STORAGE.TOP CHESTS AND ROLLER CABINETS.
Roller Cabinets Feature:• Dual ball bearing slides on 8" high drawers• Black, ribbed rubber work mat to protect top surface• Painted tubular steel cabinet handle• Heavy duty 5"x2" casters (combination locking and swivel)
Visit us at...www.stanleyproto.com2
TO
OL
ST
OR
AG
E
95414R ROLLER CABINET• 14 Drawers• Capacity cubic inches: 19219• Weight: 267 lbs.
Cabinet Number of Drawer DimensionsDimensions Drawers Left Bank Right Bank
1/1 4"h x 24"w x 18"d 4"h x 24"w x 18"d
41-1/2"h x 54"w x 18"d 2/2 2"h x 24"w x 18"d 2"h x 24"w x 18"d
3/3 4"h x 24"w x 18"d 4"h x 24"w x 18"d
1/1 8"h x 24"w x 18"d 8"h x 24"w x 18"d
94114R ROLLER CABINET• 14 Drawers• Capacity cubic inches: 14194• Weight: 229 lbs.
Cabinet Number of Drawer DimensionsDimensions Drawers Left Bank Right Bank
1/1 4"h x 24"w x 18"d 4"h x 12"w x 18"d
41-1/2"h x 41"w x 18"d 2/2 2"h x 24"w x 18"d 2"h x 12"w x 18"d
3/3 4"h x 24"w x 18"d 4"h x 12"w x 18"d
1/1 8"h x 24"w x 18"d 8"h x 12"w x 18"d
94113R ROLLER CABINET• 13 Drawers• Capacity cubic inches: 14365• Weight: 211 lbs.
Cabinet Number of Drawer DimensionsDimensions Drawers Left Bank Right Bank
1 4"h x 37"w x 18"d —
41-1/2"h x 41"w x 18"d 2/2 2"h x 24"w x 18"d 2"h x 12"w x 18"d
3/3 4"h x 24"w x 18"d 4"h x 12"w x 18"d
1/1 8"h x 24"w x 18"d 8"h x 12"w x 18"d
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
TO
OL
ST
OR
AG
E
3Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
R O L L E R C A B I N E T S
94106R ROLLER CABINET• 6 Drawers• Capacity cubic inches: 15644• Weight: 191 lbs.
Cabinet Number of Dimensions Drawers Drawer Dimensions
41-1/2"h x 41"w x 18"d 5 4"h x 37"w x 18"d
1 8"h x 37"w x 18"d
92708R ROLLER CABINET• 8 Drawers• Capacity cubic inches: 9450• Weight: 144 lbs.
Cabinet Number of Dimensions Drawers Drawer Dimensions
1 4"h x 24"w x 18"d
41-1/2"h x 27"w x 18"d 4 2"h x 24"w x 18"d
2 4"h x 24"w x 18"d
1 8"h x 24"w x 18"d
92705R ROLLER CABINET• 5 Drawers• Capacity cubic inches: 7630• Weight: 112 lbs.
Cabinet Number of Dimensions Drawers Drawer Dimensions
1 4"h x 24"w x 18"d
35"h x 27"w x 18"d 1 2"h x 24"w x 18"d
2 4"h x 24"w x 18"d
1 8"h x 24"w x 18"d
95410C 94109C 94107C 92706C 92705C 90007S 92703I
95414R X X X X X X 27"w94114R X X X X X 27"w94113R X X X X X 27"w94106R X X X X X 27"w92708R X X X Exact Fit92705R X X X Exact Fit
Chests Accessories
BlackhawkTM by Proto® Storage Combinations - Designed To Work Together
Cabinets
Visit us at...www.stanleyproto.com4
TO
OL
ST
OR
AG
E
95410C TOP CHEST• 10 Drawers• Capacity cubic inches: 12491• Weight: 187 lbs.
Cabinet Number of Drawer DimensionsDimensions Drawers Left Bank Right Bank
23"h x 54"w x 18"d 3/3 2"h x 24"w x 18"d 2"h x 24"w x 18"d
2/2 4"h x 24"w x 18"d 4"h x 24"w x 18"d
94109C TOP CHEST• 9 Drawers• Capacity cubic inches: 9347• Weight: 148 lbs.
Cabinet Number of Drawer DimensionsDimensions Drawers Left Bank Right Bank
23"h x 41"w x 18"d 3/3 2"h x 24"w x 18"d 2"h x 12"w x 18"d
1/2 8"h x 24"w x 18"d 4"h x 12"w x 18"d
94107C TOP CHEST• 7 Drawers• Capacity cubic inches: 9500• Weight: 138 lbs.
Cabinet Number of Drawer DimensionsDimensions Drawers Left Bank Right Bank
1/1 2"h x 24"w x 18"d 2"h x 12"w x 18"d
23"h x 41"w x 18"d 1/1 4"h x 24"w x 18"d 4"h x 12"w x 18"d
2/1 4"h x 24"w x 18"d 8"h x 12"w x 18"d
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
TO
OL
ST
OR
AG
E
5Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
T O P C H E S T
92706C TOP CHEST• 6 Drawers• Capacity cubic inches: 6037• Weight: 86 lbs.
Cabinet Number of Dimensions Drawers Drawer Dimensions
19"h x 27"w x 18"d 5 2"h x 24"w x 18"d
1 4"h x 24"w x 18"d
92705C TOP CHEST• 5 Drawers• Capacity cubic inches: 6196• Weight: 83 lbs.
Cabinet Number of Dimensions Drawers Drawer Dimensions
19"h x 27"w x 18"d 3 2"h x 24"w x 18"d
2 4"h x 24"w x 18"d
95410C 94109C 94107C 92706C 92705C 90007S 92703I
95414R X X X X X X 27"w94114R X X X X X 27"w94113R X X X X X 27"w94106R X X X X X 27"w92708R X X X Exact Fit92705R X X X Exact Fit
Chests Accessories
BlackhawkTM by Proto® Storage Combinations - Designed to Work Together
Cabinets
90007S SIDE CABINET• Attaches to Blackhawk™ by Proto® Roller Cabinets• 7 Drawers• Capacity cubic inches: 4584• Weight: 86 lbs.
Cabinet Number of Dimensions Drawers Drawer Dimensions
1 4"h x 12"w x 18"d
35"h x 15"w x 18"d 2 2"h x 12"w x 18"d
3 4"h x 12"w x 18"d
1 8"h x 12"w x 18"d
92703I INTERMEDIATE• 3 Drawers• Capacity cubic inches: 2586• Weight: 51 lbs.
Cabinet Number of Dimensions Drawers Drawer Dimensions
11 1/2"h x 27"w x 18"d 2 2"h x 24"w x 18"d
1 4"h x 24"w x 18"d
94100 TOOL BOX WITH TRAY• Capacity cubic inches: 931• Weight: 8 lbs.
Dimension
7"h x 19"w x 7"d
Visit us at...www.stanleyproto.com6
TO
OL
ST
OR
AG
E
95410C 94109C 94107C 92706C 92705C 90007S 92703I
95414R X X X X X X 27"w94114R X X X X X 27"w94113R X X X X X 27"w94106R X X X X X 27"w92708R X X X Exact Fit92705R X X X Exact Fit
Chests Accessories
BlackhawkTM by Proto® Storage Combinations - Designed to Work Together
Cabinets
A C C E S S O R I E S
Master Sets include the most popular standard and metric tools in multiple drive sizes plus wrenches, screwdrivers,
punches, chisels, pliers, and other assorted hand tools. Sets range in size from 30 pieces to over 1000. The tools
required to meet the demand of any job.
MASTER SETS.DESIGNED TO MEET THE NEEDS OF THE PROFESSIONAL.
master.qxd 6/24/05 1:30 PM Page 7
Visit us at...www.stanleyproto.com8
MA
ST
ER
SE
TS
Torx® is a registered trademark of Textron.
1050 PIECE MASTER TOOL SETITEM NO. 97050• Weight: 501 lbs.
602 Sockets & Accessories115 Wrenches27 Screwdrivers29 Punches & Chisels33 Pliers244 Miscellaneous Tools
master.qxd 6/24/05 1:30 PM Page 8
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
9Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-1705 12 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1706 12 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1707 12 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1708 12 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1709 12 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1710 12 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1711 12 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1712 12 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1714 12 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1716 12 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1507 6 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-1406 12 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1407 12 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1408 12 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1409 12 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1410 12 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1411 12 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1412 12 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1414 12 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1416 12 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mmGW-645M 6 Pt. Standard Metric Socket 1/4" Drive 4.5 mmGW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-655M 6 Pt. Standard Metric Socket 1/4" Drive 5.5 mmGW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mmGW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mmGW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-705M 12 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-755M 12 Pt. Standard Metric Socket 1/4" Drive 5.5 mmGW-706M 12 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-707M 12 Pt. Standard Metric Socket 1/4" Drive 7 mmGW-708M 12 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-709M 12 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-710M 12 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-711M 12 Pt. Standard Metric Socket 1/4" Drive 11 mmGW-712M 12 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-713M 12 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-504M 6 Pt. Deep Metric Socket 1/4" Drive 4 mmGW-505M 6 Pt. Deep Metric Socket 1/4" Drive 5 mmGW-506M 6 Pt. Deep Metric Socket 1/4" Drive 6 mmGW-507M 6 Pt. Deep Metric Socket 1/4" Drive 7 mmGW-508M 6 Pt. Deep Metric Socket 1/4" Drive 8 mm
GW-509M 6 Pt. Deep Metric Socket 1/4" Drive 9 mmGW-510M 6 Pt. Deep Metric Socket 1/4" Drive 10 mmGW-511M 6 Pt. Deep Metric Socket 1/4" Drive 11 mmGW-512M 6 Pt. Deep Metric Socket 1/4" Drive 12 mmGW-513M 6 Pt. Deep Metric Socket 1/4" Drive 13 mmGW-1605M 12 Pt. Deep Metric Socket 1/4" Drive 5 mmGW-1606M 12 Pt. Deep Metric Socket 1/4" Drive 6 mmGW-1607M 12 Pt. Deep Metric Socket 1/4" Drive 7 mmGW-1608M 12 Pt. Deep Metric Socket 1/4" Drive 8 mmGW-1609M 12 Pt. Deep Metric Socket 1/4" Drive 9 mmGW-1610M 12 Pt. Deep Metric Socket 1/4" Drive 10 mmGW-1611M 12 Pt. Deep Metric Socket 1/4" Drive 11 mmGW-1612M 12 Pt. Deep Metric Socket 1/4" Drive 12 mmGW-1613M 12 Pt. Deep Metric Socket 1/4" Drive 13 mmGW-1208 8 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1210 8 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1212 8 Pt. Standard Inch Socket 1/4" Drive 3/8"TS-1209 1/4" Drive Torx® Socket Internal T9TS-1210 1/4" Drive Torx® Socket Internal T10TS-1215 1/4" Drive Torx® Socket Internal T15TS-1220 1/4" Drive Torx® Socket Internal T20TS-1225 1/4" Drive Torx® Socket Internal T25TS-1227 1/4" Drive Torx® Socket Internal T27TS-1230 1/4" Drive Torx® Socket Internal T30TS-1340 3/8" Drive Torx® Socket Internal T40TS-1345 3/8" Drive Torx® Socket Internal T45TS-1347 3/8" Drive Torx® Socket Internal T47TS-1350 3/8" Drive Torx® Socket Internal T50TS-1355 3/8" Drive Torx® Socket Internal T55TR-3210 1/4" Tamper-Resistant Torx® Socket Internal T10TR-3215 1/4" Tamper-Resistant Torx® Socket Internal T15TR-3220 1/4" Tamper-Resistant Torx® Socket Internal T20TR-3225 1/4" Tamper-Resistant Torx® Socket Internal T25TR-3227 1/4" Tamper-Resistant Torx® Socket Internal T27TR-3230 1/4" Tamper-Resistant Torx® Socket Internal T30TS-2204 1/4" Drive Torx® Socket External E4TS-2205 1/4" Drive Torx® Socket External E5TS-2206 1/4" Drive Torx® Socket External E6TS-2207 1/4" Drive Torx® Socket External E7TS-2208 3/8" Drive Torx® Socket External E8TS-2310 3/8" Drive Torx® Socket External E10TS-2312 3/8" Drive Torx® Socket External E12TS-2314 3/8" Drive Torx® Socket External E14TS-2316 3/8" Drive Torx® Socket External E16GW-9550 1/4" Drive Spinner34960 1/4" Drive 1/4" X 3/8" Adapter9000H 1/4" Drive Bit HolderGW-9545 1/4" Drive Flexible SpinnerGW-9898 1/4" Drive Extension 3"GW-9899 1/4" Drive Extension 6"GW-9955B 1/4" Drive Quick Release RatchetGW-9945B 1/4" Drive Round Head Reversible RatchetGW-9749B 1/4" Drive Flex Handle Ratchet30608 6 Pt. Standard Inch Socket 3/8" Drive 1/4"30010 6 Pt. Standard Inch Socket 3/8" Drive 5/16"30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"30630 6 Pt. Standard Inch Socket 3/8" Drive 15/16"
1050 PIECE MASTER TOOL SETITEM NO. 97050 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 9
Visit us at...www.stanleyproto.com10
MA
ST
ER
SE
TS
30632 6 Pt. Standard Inch Socket 3/8" Drive 1"30010A 12 Pt. Standard Inch Socket 3/8" Drive 5/16"30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"300301 12 Pt. Standard Inch Socket 3/8" Drive 15/16"300321 12 Pt. Standard Inch Socket 3/8" Drive 1"HW-1510 6 Pt. Deep Inch Socket 3/8" Drive 5/16"HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"HW-1520 6 Pt. Deep Inch Socket 3/8" Drive 5/8"HW-1522 6 Pt. Deep Inch Socket 3/8" Drive 11/16"HW-1524 6 Pt. Deep Inch Socket 3/8" Drive 3/4"HW-1526 6 Pt. Deep Inch Socket 3/8" Drive 13/16"HW-1528 6 Pt. Deep Inch Socket 3/8" Drive 7/8"HW-1530 6 Pt. Deep Inch Socket 3/8" Drive 15/16"HW-1532 6 Pt. Deep Inch Socket 3/8" Drive 1"30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"30428 12 Pt. Deep Inch Socket 3/8" Drive 7/8"30430 12 Pt. Deep Inch Socket 3/8" Drive 15/16"30432 12 Pt. Deep Inch Socket 3/8" Drive 1"32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm32008M 6 Pt. Standard Metric Socket 3/8" Drive 8 mm32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm32020M 6 Pt. Standard Metric Socket 3/8" Drive 20 mm32021M 6 Pt. Standard Metric Socket 3/8" Drive 21 mm32022M 6 Pt. Standard Metric Socket 3/8" Drive 22 mm34007M 12 Pt. Standard Metric Socket 3/8" Drive 7 mm34008M 12 Pt. Standard Metric Socket 3/8" Drive 8 mm34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm
34020M 12 Pt. Standard Metric Socket 3/8" Drive 20 mm34021M 12 Pt. Standard Metric Socket 3/8" Drive 21 mm34022M 12 Pt. Standard Metric Socket 3/8" Drive 22 mmHW-1507M 6 Pt. Deep Metric Socket 3/8" Drive 7 mmHW-1508M 6 Pt. Deep Metric Socket 3/8" Drive 8 mmHW-1509M 6 Pt. Deep Metric Socket 3/8" Drive 9 mmHW-1510M 6 Pt. Deep Metric Socket 3/8" Drive 10 mmHW-1511M 6 Pt. Deep Metric Socket 3/8" Drive 11 mmHW-1512M 6 Pt. Deep Metric Socket 3/8" Drive 12 mmHW-1513M 6 Pt. Deep Metric Socket 3/8" Drive 13 mmHW-1514M 6 Pt. Deep Metric Socket 3/8" Drive 14 mmHW-1515M 6 Pt. Deep Metric Socket 3/8" Drive 15 mmHW-1517M 6 Pt. Deep Metric Socket 3/8" Drive 17 mmHW-1518M 6 Pt. Deep Metric Socket 3/8" Drive 18 mmHW-1519M 6 Pt. Deep Metric Socket 3/8" Drive 19 mmHW-1607M 12 Pt. Deep Metric Socket 3/8" Drive 7 mmHW-1608M 12 Pt. Deep Metric Socket 3/8" Drive 8 mmHW-1609M 12 Pt. Deep Metric Socket 3/8" Drive 9 mmHW-1610M 12 Pt. Deep Metric Socket 3/8" Drive 10 mmHW-1611M 12 Pt. Deep Metric Socket 3/8" Drive 11 mmHW-1612M 12 Pt. Deep Metric Socket 3/8" Drive 12 mmHW-1613M 12 Pt. Deep Metric Socket 3/8" Drive 13 mmHW-1614M 12 Pt. Deep Metric Socket 3/8" Drive 14 mmHW-1615M 12 Pt. Deep Metric Socket 3/8" Drive 15 mmHW-1616M 12 Pt. Deep Metric Socket 3/8" Drive 16 mmHW-1617M 12 Pt. Deep Metric Socket 3/8" Drive 17 mmHW-1618M 12 Pt. Deep Metric Socket 3/8" Drive 18 mmHW-1619M 12 Pt. Deep Metric Socket 3/8" Drive 19 mm31108 8 Pt. Standard Inch Socket 3/8" Drive 1/4"31110 8 Pt. Standard Inch Socket 3/8" Drive 5/16"31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"31114 8 Pt. Standard Inch Socket 3/8" Drive 7/16"31116 8 Pt. Standard Inch Socket 3/8" Drive 1/2"30212 6 Pt. Universal Inch Socket 3/8" Drive 3/8"30214 6 Pt. Universal Inch Socket 3/8" Drive 7/16"30216 6 Pt. Universal Inch Socket 3/8" Drive 1/2"30218 6 Pt. Universal Inch Socket 3/8" Drive 9/16"30220 6 Pt. Universal Inch Socket 3/8" Drive 5/8"30222 6 Pt. Universal Inch Socket 3/8" Drive 11/16"30224 6 Pt. Universal Inch Socket 3/8" Drive 3/4"30209M 6 Pt. Universal Metric Socket 3/8" Drive 9 mm30210M 6 Pt. Universal Metric Socket 3/8" Drive 10 mm30211M 6 Pt. Universal Metric Socket 3/8" Drive 11 mm30212M 6 Pt. Universal Metric Socket 3/8" Drive 12 mm30213M 6 Pt. Universal Metric Socket 3/8" Drive 13 mm30214M 6 Pt. Universal Metric Socket 3/8" Drive 14 mm30215M 6 Pt. Universal Metric Socket 3/8" Drive 15 mmU-1508 6 Pt. Standard Inch Impact Socket 3/8" Drive 1/4"U-1510 6 Pt. Standard Inch Impact Socket 3/8" Drive 5/16"U-1512 6 Pt. Standard Inch Impact Socket 3/8" Drive 3/8"U-1514 6 Pt. Standard Inch Impact Socket 3/8" Drive 7/16"U-1516 6 Pt. Standard Inch Impact Socket 3/8" Drive 1/2"U-1518 6 Pt. Standard Inch Impact Socket 3/8" Drive 9/16"U-1520 6 Pt. Standard Inch Impact Socket 3/8" Drive 5/8"U-1522 6 Pt. Standard Inch Impact Socket 3/8" Drive 11/16"U-1524 6 Pt. Standard Inch Impact Socket 3/8" Drive 3/4"U-1508M 6 Pt. Standard Metric Impact Socket 3/8" Drive 8 mmU-1509M 6 Pt. Standard Metric Impact Socket 3/8" Drive 9 mmU-1510M 6 Pt. Standard Metric Impact Socket 3/8" Drive 10 mmU-1512M 6 Pt. Standard Metric Impact Socket 3/8" Drive 12 mmU-1513M 6 Pt. Standard Metric Impact Socket 3/8" Drive 13 mmU-1514M 6 Pt. Standard Metric Impact Socket 3/8" Drive 14 mmU-1515M 6 Pt. Standard Metric Impact Socket 3/8" Drive 15 mmU-1517M 6 Pt. Standard Metric Impact Socket 3/8" Drive 17 mmU-1518M 6 Pt. Standard Metric Impact Socket 3/8" Drive 18 mm
1050 PIECE MASTER TOOL SETITEM NO. 97050 (CONTINUED)
Contents Description Contents Description
Phillips® is a registered trademark of Phillips Screw Co.
master.qxd 6/24/05 1:30 PM Page 10
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
11Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
U-1519M 6 Pt. Standard Metric Impact Socket 3/8" Drive 19 mmU-1610 6 Pt. Deep Inch Impact Socket 3/8" Drive 5/16"U-1612 6 Pt. Deep Inch Impact Socket 3/8" Drive 3/8"U-1614 6 Pt. Deep Inch Impact Socket 3/8" Drive 7/16"U-1616 6 Pt. Deep Inch Impact Socket 3/8" Drive 1/2"U-1618 6 Pt. Deep Inch Impact Socket 3/8" Drive 9/16"U-1620 6 Pt. Deep Inch Impact Socket 3/8" Drive 5/8"U-1622 6 Pt. Deep Inch Impact Socket 3/8" Drive 11/16"U-1624 6 Pt. Deep Inch Impact Socket 3/8" Drive 3/4"U-1608M 6 Pt. Deep Metric Impact Socket 3/8" Drive 8 mmU-1609M 6 Pt. Deep Metric Impact Socket 3/8" Drive 9 mmU-1610M 6 Pt. Deep Metric Impact Socket 3/8" Drive 10 mmU-1611M 6 Pt. Deep Metric Impact Socket 3/8" Drive 11 mmU-1612M 6 Pt. Deep Metric Impact Socket 3/8" Drive 12 mmU-1613M 6 Pt. Deep Metric Impact Socket 3/8" Drive 13 mmU-1614M 6 Pt. Deep Metric Impact Socket 3/8" Drive 14 mmU-1615M 6 Pt. Deep Metric Impact Socket 3/8" Drive 15 mmU-1616M 6 Pt. Deep Metric Impact Socket 3/8" Drive 16 mmU-1617M 6 Pt. Deep Metric Impact Socket 3/8" Drive 17 mmU-1618M 6 Pt. Deep Metric Impact Socket 3/8" Drive 18 mmU-1619M 6 Pt. Deep Metric Impact Socket 3/8" Drive 19 mmHW-1520S 3/8" Drive Spark Plug Socket 5/8"HW-1526S 3/8" Drive Spark Plug Socket 13/16"30320S 3/8" Drive Spark Plug Socket 5/8" Universal30326 3/8" Drive Spark Plug Socket 13/16" Universal34993 3/8" Drive Universal Joint34963 3/8" Drive 3/8" x 1/4" Adapter34966 3/8" Drive 3/8" x 1/2" Adapter34984 3/8" Drive Extension 11" 34989 3/8" Drive Extension 1-3/4" 34983 3/8" Drive Extension 19" 34988 3/8" Drive Extension 3" 34987 3/8" Drive Extension 6" 34947B 3/8" Drive Round Head Reversible Ratchet34948B 3/8" Drive Mini Flex Ratchet34950X 3/8" Drive Indexible Head Ratchet34945B 3/8" Drive Round Head Knurled Reversible Ratchet34982 3/8" Drive Speeder Handle Ratchet34986B 3/8" Drive Flex Handle RatchetHW-9504 Slotted Screwdriver Bit Socket 3/16" Tip WidthHW-9505 Slotted Screwdriver Bit Socket 1/4" Tip WidthHW-9506 Slotted Screwdriver Bit Socket 5/16" Tip WidthHW-9450 Phillips® Screwdriver Bit Socket No. 1HW-9451 Phillips® Screwdriver Bit Socket No. 2HW-9452 Phillips® Screwdriver Bit Socket No. 3HW-9453 Phillips® Screwdriver Bit Socket No. 4HW-9442 3/8" Drive Hex Bit Socket Inch 1/8"HW-9443 3/8" Drive Hex Bit Socket Inch 9/64"HW-9444 3/8" Drive Hex Bit Socket Inch 5/32"HW-9449 3/8" Drive Hex Bit Socket Inch 3/16"HW-9448 3/8" Drive Hex Bit Socket Inch 7/32"HW-9447 3/8" Drive Hex Bit Socket Inch 1/4"HW-9446 3/8" Drive Hex Bit Socket Inch 5/16"HW-9445 3/8" Drive Hex Bit Socket Inch 3/8"HW-9404M Hex Bit Socket Metric 4 mmHW-9405M Hex Bit Socket Metric 5 mmHW-9406M Hex Bit Socket Metric 6 mmHW-9407M Hex Bit Socket Metric 7 mmHW-9408M Hex Bit Socket Metric 8 mmHW-9410M Hex Bit Socket Metric 10 mm40612 6 Pt. Standard Inch Socket 1/2" Drive 3/8"40614 6 Pt. Standard Inch Socket 1/2" Drive 7/16"40616 6 Pt. Standard Inch Socket 1/2" Drive 1/2"40618 6 Pt. Standard Inch Socket 1/2" Drive 9/16"40620 6 Pt. Standard Inch Socket 1/2" Drive 5/8"
40622 6 Pt. Standard Inch Socket 1/2" Drive 11/16"40624 6 Pt. Standard Inch Socket 1/2" Drive 3/4"40626 6 Pt. Standard Inch Socket 1/2" Drive 13/16"40628 6 Pt. Standard Inch Socket 1/2" Drive 7/8"40630 6 Pt. Standard Inch Socket 1/2" Drive 15/16"40632 6 Pt. Standard Inch Socket 1/2" Drive 1"40634 6 Pt. Standard Inch Socket 1/2" Drive 1-1/16"40636 6 Pt. Standard Inch Socket 1/2" Drive 1-1/8"40640 6 Pt. Standard Inch Socket 1/2" Drive 1-1/4"40642A 6 Pt. Standard Inch Socket 1/2" Drive 1-1/2"40112 12 Pt. Standard Inch Socket 1/2" Drive 3/8"40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"40132 12 Pt. Standard Inch Socket 1/2" Drive 1"40134 12 Pt. Standard Inch Socket 1/2" Drive 1-1/16"40136 12 Pt. Standard Inch Socket 1/2" Drive 1-1/8"40140 12 Pt. Standard Inch Socket 1/2" Drive 1-1/4"40138 12 Pt. Standard Inch Socket 1/2" Drive 1-3/16"40144A 12 Pt. Standard Inch Socket 1/2" Drive 1-1/2"40416 6 Pt. Deep Inch Socket 1/2" Drive 1/2"40418 6 Pt. Deep Inch Socket 1/2" Drive 9/16"40420 6 Pt. Deep Inch Socket 1/2" Drive 5/8"40422 6 Pt. Deep Inch Socket 1/2" Drive 11/16"40424 6 Pt. Deep Inch Socket 1/2" Drive 3/4"40426 6 Pt. Deep Inch Socket 1/2" Drive 13/16"40428 6 Pt. Deep Inch Socket 1/2" Drive 7/8"40430 6 Pt. Deep Inch Socket 1/2" Drive 15/16"40432 6 Pt. Deep Inch Socket 1/2" Drive 1"40434 6 Pt. Deep Inch Socket 1/2" Drive 1-1/16"40436 6 Pt. Deep Inch Socket 1/2" Drive 1-1/8"40316 12 Pt. Deep Inch Socket 1/2" Drive 1/2"40318 12 Pt. Deep Inch Socket 1/2" Drive 9/16"40320 12 Pt. Deep Inch Socket 1/2" Drive 5/8"40322 12 Pt. Deep Inch Socket 1/2" Drive 11/16"40324 12 Pt. Deep Inch Socket 1/2" Drive 3/4"40326 12 Pt. Deep Inch Socket 1/2" Drive 13/16"40328 12 Pt. Deep Inch Socket 1/2" Drive 7/8"40330 12 Pt. Deep Inch Socket 1/2" Drive 15/16"40332 12 Pt. Deep Inch Socket 1/2" Drive 1"40334 12 Pt. Deep Inch Socket 1/2" Drive 1-1/16"40336 12 Pt. Deep Inch Socket 1/2" Drive 1-1/8"42010M 6 Pt. Standard Metric Socket 1/2" Drive 10 mm42011M 6 Pt. Standard Metric Socket 1/2" Drive 11 mm42012M 6 Pt. Standard Metric Socket 1/2" Drive 12 mm42013M 6 Pt. Standard Metric Socket 1/2" Drive 13 mm42014M 6 Pt. Standard Metric Socket 1/2" Drive 14 mm43015M 6 Pt. Standard Metric Socket 1/2" Drive 15 mm43017M 6 Pt. Standard Metric Socket 1/2" Drive 17 mm43019M 6 Pt. Standard Metric Socket 1/2" Drive 19 mm43021M 6 Pt. Standard Metric Socket 1/2" Drive 21 mm43022M 6 Pt. Standard Metric Socket 1/2" Drive 22 mm43023M 6 Pt. Standard Metric Socket 1/2" Drive 23 mm43024M 6 Pt. Standard Metric Socket 1/2" Drive 24 mm43027M 6 Pt. Standard Metric Socket 1/2" Drive 27 mm43010M 12 Pt. Standard Metric Socket 1/2" Drive 10 mm43011M 12 Pt. Standard Metric Socket 1/2" Drive 11 mm43012M 12 Pt. Standard Metric Socket 1/2" Drive 12 mm43013M 12 Pt. Standard Metric Socket 1/2" Drive 13 mm
1050 PIECE MASTER TOOL SETITEM NO. 97050 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 11
Visit us at...www.stanleyproto.com12
MA
ST
ER
SE
TS
43014M 12 Pt. Standard Metric Socket 1/2" Drive 14 mm42015M 12 Pt. Standard Metric Socket 1/2" Drive 15 mm 42016M 12 Pt. Standard Metric Socket 1/2" Drive 16 mm42017M 12 Pt. Standard Metric Socket 1/2" Drive 17 mm42018M 12 Pt. Standard Metric Socket 1/2" Drive 18 mm42019M 12 Pt. Standard Metric Socket 1/2" Drive 19 mm42020M 12 Pt. Standard Metric Socket 1/2" Drive 20 mm42021M 12 Pt. Standard Metric Socket 1/2" Drive 21 mm42022M 12 Pt. Standard Metric Socket 1/2" Drive 22 mm42023M 12 Pt. Standard Metric Socket 1/2" Drive 23 mm42024M 12 Pt. Standard Metric Socket 1/2" Drive 24 mm42025M 12 Pt. Standard Metric Socket 1/2" Drive 25 mm42026M 12 Pt. Standard Metric Socket 1/2" Drive 26 mm42027M 12 Pt. Standard Metric Socket 1/2" Drive 27 mm42028M 12 Pt. Standard Metric Socket 1/2" Drive 28 mm42030M 12 Pt. Standard Metric Socket 1/2" Drive 30 mm42032M 12 Pt. Standard Metric Socket 1/2" Drive 32 mm42036M 12 Pt. Standard Metric Socket 1/2" Drive 36 mm45010M 6 Pt. Deep Metric Socket 1/2" Drive 10 mm45011M 6 Pt. Deep Metric Socket 1/2" Drive 11 mm45012M 6 Pt. Deep Metric Socket 1/2" Drive 12 mm45013M 6 Pt. Deep Metric Socket 1/2" Drive 13 mm45014M 6 Pt. Deep Metric Socket 1/2" Drive 14 mm45015M 6 Pt. Deep Metric Socket 1/2" Drive 15 mm45016M 6 Pt. Deep Metric Socket 1/2" Drive 16 mm45017M 6 Pt. Deep Metric Socket 1/2" Drive 17 mm45018M 6 Pt. Deep Metric Socket 1/2" Drive 18 mm45019M 6 Pt. Deep Metric Socket 1/2" Drive 19 mm45020M 6 Pt. Deep Metric Socket 1/2" Drive 20 mm45021M 6 Pt. Deep Metric Socket 1/2" Drive 21 mm45022M 6 Pt. Deep Metric Socket 1/2" Drive 22 mm45023M 6 Pt. Deep Metric Socket 1/2" Drive 23 mm45024M 6 Pt. Deep Metric Socket 1/2" Drive 24 mm45025M 6 Pt. Deep Metric Socket 1/2" Drive 25 mm45026M 6 Pt. Deep Metric Socket 1/2" Drive 26 mm45027M 6 Pt. Deep Metric Socket 1/2" Drive 27 mm44010M 12 Pt. Deep Metric Socket 1/2" Drive 10 mm44011M 12 Pt. Deep Metric Socket 1/2" Drive 11 mm44012M 12 Pt. Deep Metric Socket 1/2" Drive 12 mm44013M 12 Pt. Deep Metric Socket 1/2" Drive 13 mm44014M 12 Pt. Deep Metric Socket 1/2" Drive 14 mm44015M 12 Pt. Deep Metric Socket 1/2" Drive 15 mm44016M 12 Pt. Deep Metric Socket 1/2" Drive 16 mm44017M 12 Pt. Deep Metric Socket 1/2" Drive 17 mm44018M 12 Pt. Deep Metric Socket 1/2" Drive 18 mm44019M 12 Pt. Deep Metric Socket 1/2" Drive 19 mm44020M 12 Pt. Deep Metric Socket 1/2" Drive 20 mm44021M 12 Pt. Deep Metric Socket 1/2" Drive 21 mm44022M 12 Pt. Deep Metric Socket 1/2" Drive 22 mm44023M 12 Pt. Deep Metric Socket 1/2" Drive 23 mm44024M 12 Pt. Deep Metric Socket 1/2" Drive 24 mm44025M 12 Pt. Deep Metric Socket 1/2" Drive 25 mm44026M 12 Pt. Deep Metric Socket 1/2" Drive 26 mm44027M 12 Pt. Deep Metric Socket 1/2" Drive 27 mmUW-1612 6 Pt. Standard Inch Impact Socket 1/2" Drive 3/8"UW-1614 6 Pt. Standard Inch Impact Socket 1/2" Drive 7/16"UW-1616 6 Pt. Standard Inch Impact Socket 1/2" Drive 1/2"UW-1618 6 Pt. Standard Inch Impact Socket 1/2" Drive 9/16"UW-1620 6 Pt. Standard Inch Impact Socket 1/2" Drive 5/8"UW-1622 6 Pt. Standard Inch Impact Socket 1/2" Drive 11/16"UW-1624 6 Pt. Standard Inch Impact Socket 1/2" Drive 3/4"UW-1626 6 Pt. Standard Inch Impact Socket 1/2" Drive 13/16"UW-1628 6 Pt. Standard Inch Impact Socket 1/2" Drive 7/8"UW-1630 6 Pt. Standard Inch Impact Socket 1/2" Drive 15/16"UW-1632 6 Pt. Standard Inch Impact Socket 1/2" Drive 1"
UW-1634 6 Pt. Standard Inch Impact Socket 1/2" Drive 1-1/16"UW-1636 6 Pt. Standard Inch Impact Socket 1/2" Drive 1-3/16"UW-1638 6 Pt. Standard Inch Impact Socket 1/2" Drive 1-1/8"UW-1640 6 Pt. Standard Inch Impact Socket 1/2" Drive 1-1/4"UW-1512 6 Pt. Deep Inch Impact Socket 1/2" Drive 3/8"UW-1514 6 Pt. Deep Inch Impact Socket 1/2" Drive 7/16"UW-1516 6 Pt. Deep Inch Impact Socket 1/2" Drive 1/2"UW-1518 6 Pt. Deep Inch Impact Socket 1/2" Drive 9/16"UW-1520 6 Pt. Deep Inch Impact Socket 1/2" Drive 5/8"UW-1522 6 Pt. Deep Inch Impact Socket 1/2" Drive 11/16"UW-1524 6 Pt. Deep Inch Impact Socket 1/2" Drive 3/4"UW-1526 6 Pt. Deep Inch Impact Socket 1/2" Drive 13/16"UW-1528 6 Pt. Deep Inch Impact Socket 1/2" Drive 7/8"UW-1530 6 Pt. Deep Inch Impact Socket 1/2" Drive 15/16"UW-1532 6 Pt. Deep Inch Impact Socket 1/2" Drive 1"UW-1534 6 Pt. Deep Inch Impact Socket 1/2" Drive 1-1/16"UW-1536 6 Pt. Deep Inch Impact Socket 1/2" Drive 1-1/8"UW-610M 6 Pt. Standard Metric Impact Socket 1/2" Drive 10 mmUW-611M 6 Pt. Standard Metric Impact Socket 1/2" Drive 11 mmUW-612M 6 Pt. Standard Metric Impact Socket 1/2" Drive 12 mmUW-613M 6 Pt. Standard Metric Impact Socket 1/2" Drive 13 mmUW-614M 6 Pt. Standard Metric Impact Socket 1/2" Drive 14 mmUW-615M 6 Pt. Standard Metric Impact Socket 1/2" Drive 15 mmUW-616M 6 Pt. Standard Metric Impact Socket 1/2" Drive 16 mmUW-617M 6 Pt. Standard Metric Impact Socket 1/2" Drive 17 mmUW-618M 6 Pt. Standard Metric Impact Socket 1/2" Drive 18 mmUW-619M 6 Pt. Standard Metric Impact Socket 1/2" Drive 19 mmUW-620M 6 Pt. Standard Metric Impact Socket 1/2" Drive 20 mmUW-621M 6 Pt. Standard Metric Impact Socket 1/2" Drive 21 mmUW-622M 6 Pt. Standard Metric Impact Socket 1/2" Drive 22 mmUW-624M 6 Pt. Standard Metric Impact Socket 1/2" Drive 24 mmUW-627M 6 Pt. Standard Metric Impact Socket 1/2" Drive 27 mmUW-510M 6 Pt. Deep Metric Impact Socket 1/2" Drive 10 mmUW-511M 6 Pt. Deep Metric Impact Socket 1/2" Drive 11 mmUW-512M 6 Pt. Deep Metric Impact Socket 1/2" Drive 12 mmUW-513M 6 Pt. Deep Metric Impact Socket 1/2" Drive 13 mmUW-514M 6 Pt. Deep Metric Impact Socket 1/2" Drive 14 mmUW-515M 6 Pt. Deep Metric Impact Socket 1/2" Drive 15 mmUW-516M 6 Pt. Deep Metric Impact Socket 1/2" Drive 16 mmUW-517M 6 Pt. Deep Metric Impact Socket 1/2" Drive 17 mmUW-518M 6 Pt. Deep Metric Impact Socket 1/2" Drive 18 mmUW-519M 6 Pt. Deep Metric Impact Socket 1/2" Drive 19 mmUW-520M 6 Pt. Deep Metric Impact Socket 1/2" Drive 20 mmUW-521M 6 Pt. Deep Metric Impact Socket 1/2" Drive 21 mmUW-522M 6 Pt. Deep Metric Impact Socket 1/2" Drive 22 mmUW-524M 6 Pt. Deep Metric Impact Socket 1/2" Drive 24 mmUW-526M 6 Pt. Deep Metric Impact Socket 1/2" Drive 26 mmUW-527M 6 Pt. Deep Metric Impact Socket 1/2" Drive 27 mmUW-1505 2 Pc 1/2" Drive Speciality Socket Wheel Impact Lug KitUWP-430M 1/2" Drive Speciality Socket 30 mmUWP-436M 1/2" Drive Speciality Socket 36 mm40326S 1/2" Drive Spark Plug Socket 13/16"40320S 1/2" Drive Spark Plug Socket 5/8"49979 1/2" Drive 15/16" Drag Link Socket49980 1/2" Drive Stud Extractor49978 1/2" Drive Universal Joint34965 1/2" Drive 1/2" x 3/8" Adapter69992 1/2" Drive 1/2" x 3/4" Adapter49972 1/2" Drive Extension 19" 49964 1/2" Drive Extension 2" 49966 1/2" Drive Extension 5" 49990 1/2" Drive Extension 10" 49976 1/2" Drive Impact Universal JointUW-24 1/2" Drive Impact Extension 5" UW-30 1/2" Drive Impact Extension 2-5/8"
1050 PIECE MASTER TOOL SETITEM NO. 97050 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 12
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
13Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
UW-25 1/2" Drive Impact Extension 10" 49945B 1/2" Drive Round Head Reversible Ratchet49992 1/2" Drive Speeder Handle Ratchet 49988B 1/2" Drive Flex Handle Ratchet 60026A 12 Pt. Standard Inch Socket 3/4" Drive 3/4"60027A 12 Pt. Standard Inch Socket 3/4" Drive 13/16"60028 12 Pt. Standard Inch Socket 3/4" Drive 7/8"60030 12 Pt. Standard Inch Socket 3/4" Drive 15/16"60032 12 Pt. Standard Inch Socket 3/4" Drive 1"60034 12 Pt. Standard Inch Socket 3/4" Drive 1-1/16"60036 12 Pt. Standard Inch Socket 3/4" Drive 1-1/8"60038 12 Pt. Standard Inch Socket 3/4" Drive 1-3/16"60040 12 Pt. Standard Inch Socket 3/4" Drive 1-1/4"60042 12 Pt. Standard Inch Socket 3/4" Drive 1-5/16"60044 12 Pt. Standard Inch Socket 3/4" Drive 1-3/8"60046 12 Pt. Standard Inch Socket 3/4" Drive 1-7/16"60048 12 Pt. Standard Inch Socket 3/4" Drive 1-1/2"60050 12 Pt. Standard Inch Socket 3/4" Drive 1-9/16"60052 12 Pt. Standard Inch Socket 3/4" Drive 1-5/8"60054 12 Pt. Standard Inch Socket 3/4" Drive 1-11/16"60056 12 Pt. Standard Inch Socket 3/4" Drive 1-3/4"60058 12 Pt. Standard Inch Socket 3/4" Drive 1-13/16"60060 12 Pt. Standard Inch Socket 3/4" Drive 1-7/8"60064 12 Pt. Standard Inch Socket 3/4" Drive 2"60068 12 Pt. Standard Inch Socket 3/4" Drive 2-1/8"60070 12 Pt. Standard Inch Socket 3/4" Drive 2-3/16"61019M 12 Pt. Standard Metric Socket 3/4" Drive 19 mm61021M 12 Pt. Standard Metric Socket 3/4" Drive 21 mm61022M 12 Pt. Standard Metric Socket 3/4" Drive 22 mm61023M 12 Pt. Standard Metric Socket 3/4" Drive 23 mm61024M 12 Pt. Standard Metric Socket 3/4" Drive 24 mm61025M 12 Pt. Standard Metric Socket 3/4" Drive 25 mm61026M 12 Pt. Standard Metric Socket 3/4" Drive 26 mm61027M 12 Pt. Standard Metric Socket 3/4" Drive 27 mm61028M 12 Pt. Standard Metric Socket 3/4" Drive 28 mm61029M 12 Pt. Standard Metric Socket 3/4" Drive 29 mm61030M 12 Pt. Standard Metric Socket 3/4" Drive 30 mm61031M 12 Pt. Standard Metric Socket 3/4" Drive 31 mm61032M 12 Pt. Standard Metric Socket 3/4" Drive 32 mm61035M 12 Pt. Standard Metric Socket 3/4" Drive 35 mm61036M 12 Pt. Standard Metric Socket 3/4" Drive 36 mm61038M 12 Pt. Standard Metric Socket 3/4" Drive 38 mm61041M 12 Pt. Standard Metric Socket 3/4" Drive 41 mm61042M 12 Pt. Standard Metric Socket 3/4" Drive 42 mm61046M 12 Pt. Standard Metric Socket 3/4" Drive 46 mm61050M 12 Pt. Standard Metric Socket 3/4" Drive 50 mm61054M 12 Pt. Standard Metric Socket 3/4" Drive 54 mmUW-2424 6 Pt. Standard Inch Impact Socket 3/4" Drive 3/4"UW-2426 6 Pt. Standard Inch Impact Socket 3/4" Drive 13/16"UW-2428 6 Pt. Standard Inch Impact Socket 3/4" Drive 7/8"UW-2430 6 Pt. Standard Inch Impact Socket 3/4" Drive 15/16"UW-2432 6 Pt. Standard Inch Impact Socket 3/4" Drive 1"UW-2434 6 Pt. Standard Inch Impact Socket 3/4" Drive 1-1/16"UW-2436 6 Pt. Standard Inch Impact Socket 3/4" Drive 1-1/8"UW-2438 6 Pt. Standard Inch Impact Socket 3/4" Drive 1-3/16"UW-2440 6 Pt. Standard Inch Impact Socket 3/4" Drive 1-1/4"UW-2442 6 Pt. Standard Inch Impact Socket 3/4" Drive 1-5/16"UW-2444 6 Pt. Standard Inch Impact Socket 3/4" Drive 1-3/8"UW-2446 6 Pt. Standard Inch Impact Socket 3/4" Drive 1 -7/16"UW-2448 6 Pt. Standard Inch Impact Socket 3/4" Drive 1-1/2"UW-2624 6 Pt. Deep Inch Impact Socket 3/4" Drive 3/4"UW-2626 6 Pt. Deep Inch Impact Socket 3/4" Drive 13/16"UW-2628 6 Pt. Deep Inch Impact Socket 3/4" Drive 7/8"UW-2630 6 Pt. Deep Inch Impact Socket 3/4" Drive 15/16"UW-2632 6 Pt. Deep Inch Impact Socket 3/4" Drive 1"
UW-2634 6 Pt. Deep Inch Impact Socket 3/4" Drive 1-1/16"UW-2636 6 Pt. Deep Inch Impact Socket 3/4" Drive 1-1/8"UW-2638 6 Pt. Deep Inch Impact Socket 3/4" Drive 1-3/16"UW-2640 6 Pt. Deep Inch Impact Socket 3/4" Drive 1-1/4"UW-2642 6 Pt. Deep Inch Impact Socket 3/4" Drive 1-5/16"UW-2644 6 Pt. Deep Inch Impact Socket 3/4" Drive 1-3/8"UW-2646 6 Pt. Deep Inch Impact Socket 3/4" Drive 1-7/16"UW-2648 6 Pt. Deep Inch Impact Socket 3/4" Drive 1-1/2"UWP-660 3/4" Budd Wheel Socket 13/16" Square, 1-1/2" Hex49991 3/4" Drive 3/4" x 1/2" Adapter69993 3/4" Drive Extension 4" 69995 3/4" Drive Extension 8" 69994 3/4" Drive Extension 16" 69997 3/4" Drive Sliding-Tee69998 3/4" Drive Flex Handle Ratchet69945B 3/4" Drive Round Head Reversible RatchetBW-1156 Satin Finish - Combination Wrench 1/4"BW-1159 Satin Finish - Combination Wrench 5/16"BW-1160 Satin Finish - Combination Wrench 3/8"BW-1161 Satin Finish - Combination Wrench 7/16"BW-1162 Satin Finish - Combination Wrench 1/2"BW-1163 Satin Finish - Combination Wrench 9/16"BW-1164 Satin Finish - Combination Wrench 5/8"BW-1165 Satin Finish - Combination Wrench 11/16"BW-1166 Satin Finish - Combination Wrench 3/4"BW-1167A Satin Finish - Combination Wrench 13/16"BW-1167 Satin Finish - Combination Wrench 7/8"BW-1168 Satin Finish - Combination Wrench 15/16"BW-1170 Satin Finish - Combination Wrench 1"BW-1171 Satin Finish - Combination Wrench 1-1/16"BW-1172 Satin Finish - Combination Wrench 1-1/8"BW-1173 Satin Finish - Combination Wrench 1-1/4"BW-1174 Satin Finish - Combination Wrench 1-5/16"BW-1175 Satin Finish - Combination Wrench 1-3/8"BW-1176 Satin Finish - Combination Wrench 1-7/16"BW-1177 Satin Finish - Combination Wrench 1-1/2"BW-1106M Satin Finish - Combination Wrench Metric 6 mmBW-1107M Satin Finish - Combination Wrench Metric 7 mmBW-1108M Satin Finish - Combination Wrench Metric 8 mmBW-1109M Satin Finish - Combination Wrench Metric 9 mmBW-1110M Satin Finish - Combination Wrench Metric 10 mmBW-1111M Satin Finish - Combination Wrench Metric 11 mmBW-1112M Satin Finish - Combination Wrench Metric 12 mmBW-1113M Satin Finish - Combination Wrench Metric 13 mmBW-1114M Satin Finish - Combination Wrench Metric 14 mmBW-1115M Satin Finish - Combination Wrench Metric 15 mmBW-1116M Satin Finish - Combination Wrench Metric 16 mmBW-1117M Satin Finish - Combination Wrench Metric 17 mmBW-1118M Satin Finish - Combination Wrench Metric 18 mmBW-1119M Satin Finish - Combination Wrench Metric 19 mmBW-1120M Satin Finish - Combination Wrench Metric 20 mmBW-1121M Satin Finish - Combination Wrench Metric 21 mmBW-1122M Satin Finish - Combination Wrench Metric 22 mmBW-1124M Satin Finish - Combination Wrench Metric 24 mmBW-1125M Satin Finish - Combination Wrench Metric 25 mmBW-1126M Satin Finish - Combination Wrench Metric 26 mmBW-1127M Satin Finish - Combination Wrench Metric 27 mmBW-1128M Satin Finish - Combination Wrench Metric 28 mmBW-1130M Satin Finish - Combination Wrench Metric 30 mmBW-1132M Satin Finish - Combination Wrench Metric 32 mm4020P Full Polish - Open End Wrench Inch 1/4" X 5/16"4723P Full Polish - Open End Wrench Inch 3/8" X 7/16"4724P Full Polish - Open End Wrench Inch 7/16" X 1/2"4725P Full Polish - Open End Wrench Inch 1/2" X 9/16"4727P Full Polish - Open End Wrench Inch 5/8" X 11/16"
1050 PIECE MASTER TOOL SETITEM NO. 97050 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 13
Visit us at...www.stanleyproto.com14
MA
ST
ER
SE
TS
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
4728P Full Polish - Open End Wrench Inch 11/16" X 3/4"4732P Full Polish - Open End Wrench Inch 13/16" X 7/8"4033P Full Polish - Open End Wrench Inch 15/16" X 1"BWE-67MP Full Polish - Open End Wrench Metric 6 mm X 7 mmBWE-89MP Full Polish - Open End Wrench Metric 8 mm X 9 mmBWE-1011MP Full Polish - Open End Wrench Metric 10 mm X 11 mmBWE-1213MP Full Polish - Open End Wrench Metric 12 mm X 13 mm BWE-1415MP Full Polish - Open End Wrench Metric 14 mm X 15 mmBWE-1617MP Full Polish - Open End Wrench Metric 16 mm X 17 mmBWE-1819MP Full Polish - Open End Wrench Metric 18 mm X 19 mmBWE-2022MP Full Polish - Open End Wrench Metric 20 mm X 22 mmBWS-1202P Box End Wrench Long - Inch 5/16" X 3/8"BWS-1206P Box End Wrench Long - Inch 7/16" X 1/2"BWS-1210P Box End Wrench Long - Inch 1/2" X 9/16"BWS-1211P Box End Wrench Long - Inch 9/16" X 5/8"BWS-1214P Box End Wrench Long - Inch 11/16" X 3/4"BWS-1216P Box End Wrench Long - Inch 13/16" X 7/8"BWS-1218P Box End Wrench Long - Inch 15/16" X 1"FN-1402P Flare Nut Wrench - Inch 3/8" X 7/16"FN-1404P Flare Nut Wrench - Inch 1/2" X 9/16"FN-1406P Flare Nut Wrench - Inch 5/8" X 11/16"FN-1410P Flare Nut Wrench - Inch 3/4" X 1"FN-911MP Flare Nut Wrench - Metric 9 mm X 11 mmFN-1012MP Flare Nut Wrench - Metric 10 mm X 12 mmFN-1314MP Flare Nut Wrench - Metric 13 mm X 14 mmFN-1517MP Flare Nut Wrench - Metric 15 mm X 17 mmFN-1921MP Flare Nut Wrench - Metric 19 mm X 21 mmAW-1004-1 Adjustable Wrench 4"AW-1006-1 Adjustable Wrench 6"AW-1008-1 Adjustable Wrench 8"AW-1010-1 Adjustable Wrench 10"AW-1012-1 Adjustable Wrench 12"AW-1015-1 Adjustable Wrench 15"AW-1351 Universal Chain Wrench 5/8" X 4 1/2"BCF-12 Crowfoot Wrench - Inch 3/8"BCF-14 Crowfoot Wrench - Inch 7/16"BCF-16 Crowfoot Wrench - Inch 1/2"BCF-18 Crowfoot Wrench - Inch 9/16"BCF-20 Crowfoot Wrench - Inch 5/8"BCF-22 Crowfoot Wrench - Inch 11/16"BCF-24 Crowfoot Wrench - Inch 3/4"BCF-26 Crowfoot Wrench - Inch 13/16"BCF-28 Crowfoot Wrench - Inch 7/8"BCF-32 Crowfoot Wrench - Inch 1"BCF-10M Crowfoot Wrench - Metric 10 mmBCF-11M Crowfoot Wrench - Metric 11 mmBCF-12M Crowfoot Wrench - Metric 12 mmBCF-13M Crowfoot Wrench - Metric 13 mmBCF-14M Crowfoot Wrench - Metric 14 mmBCF-15M Crowfoot Wrench - Metric 15 mmBCF-16M Crowfoot Wrench - Metric 16 mmBCF-17M Crowfoot Wrench - Metric 17 mmBCF-19M Crowfoot Wrench - Metric 19 mmBCF-21M Crowfoot Wrench - Metric 21 mmBCF-22M Crowfoot Wrench - Metric 22 mm3114 Ignition Open End Wrench 13/64"3116 Ignition Open End Wrench 7/32"3118 Ignition Open End Wrench 15/64"3120 Ignition Open End Wrench 1/4"3122 Ignition Open End Wrench 17/64"3124 Ignition Open End Wrench 9/32"3128 Ignition Open End Wrench 5/16"3130 Ignition Open End Wrench 11/32"3132 Ignition Open End Wrench 3/8"3134 Ignition Open End Wrench 7/16"
34835 Torque Wrench49830 Torque WrenchZW-1045A-A Air Conditioning Wrench 1/4" x 3/16" and 1/2" x 9/16"HT-1005-1 Ball Pein Hammer 16ozHT-1007-1 Ball Pein Hammer 24ozHT-1008-1 Ball Pein Hammer 32ozHT-1255 Rubber MalletCT-1003 Cold Chisel 5-1/4" Length, 3/8" EdgeCT-1004 Cold Chisel 5-1/2" Length, 7/16" EdgeCT-1006 Cold Chisel 6-1/2" Length, 5/8" EdgeCT-1456 Pin Punch 5-1/2" Length, 3/16" PointCT-1303 Center Punch 5" Length, 5/32" PointCT-1454 Pin Punch 5-1/4" Length, 5/32" PointCT-1453 Pin Punch 5" Length, 1/8" PointCT-1404 Hand Punch 5" Length, 3/16" EdgeCT-1509 Aligning Punch 11" Length, 1/4" PointCT-1314 Scribing Punch 5" Length, 5/32"CT-1306 Center Punch 6" Length, 1/4" PointCT-1464 Pin Punch 7" Length, 1/4" PointCT-1304 Center Punch 5-1/2" Length, 3/16" PointCT-1254 Diamond Point Chisel 5" Length, 3/16" EdgeCT-1008 Cold Chisel 7" Length, 3/4" EdgeCT-1466 Pin Punch 7" Length, 5/16" PointCT-1204 Round Nose Chisel 5 1/2" Length, 1/4" EdgeCT-1010 Cold Chisel 7-1/2" Length, 7/8" EdgeCT-1554 Long Taper Punch 8-1/2" Length, 5/32" PointCT-1556 Long Taper Punch 9" Length, 3/16" PointCT-1108 Long Cold Chisel 12" Length, 3/4" EdgeCT-1558 Long Taper Punch 11" Length, 5/16" PointCT-1110 Long Cold Chisel 12" Length, 7/8" EdgeCT-1606 Pinch Bar 14"CT-1156 Flat Cape ChiselST-801 Nut Driver 9/32"ST-800 Nut Driver 3/16"ST-803 Nut Driver 1/4"ST-806 Nut Driver 5/16"ST-809 Nut Driver 11/32"ST-812 Nut Driver 3/8"ST-815 Nut Driver 7/16"ST-818 Nut Driver 1/2"ST-905M Nut Driver 5 mmST-955M Nut Driver 5.5 mmST-907M Nut Driver 7 mmST-908M Nut Driver 8 mmST-909M Nut Driver 9 mmST-910M Nut Driver 10 mmST-911M Nut Driver 11 mmST-912M Nut Driver 12 mmST-1183 Offset Screwdriver 3/16"ST-1184 Offset Screwdriver 3/16"ST-1185 Offset Screwdriver 1/4"ST-1043S Electrician's Slotted Tip Screwdriver 3" Blade, 3/16" TipST-1046S Electrician's Slotted Tip Screwdriver 6" Blade, 3/16" TipST-1048S Electrician's Slotted Tip Screwdriver 8" Blade, 3/16" TipST-1081S Phillips® Tip Screwdriver 3" Blade, No. 1 Pt.ST-1082S Phillips® Tip Screwdriver 4" Blade, No. 2 Pt.ST-1083S Phillips® Tip Screwdriver 6" Blade, No. 3 Pt.ST-1084S Phillips® Tip Screwdriver 8" Blade, No. 4 Pt.ST-1140S Stubby Phillips® Tip Screwdriver 1-1/2" Blade, No. 2 Pt.ST-1145S Stubby Slotted Tip Screwdriver 1-1/4" Blade, 7/32" TipST-1150S Pocket-Size Slotted Tip Screwdriver W/ Clip 2" Blade, 1/8" TipST-1004S Round Shank Slotted Tip Screwdriver 4" Blade, 1/4" TipST-1006S Round Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1008S Round Shank Slotted Tip Screwdriver 8" Blade, 3/8" TipST-1024S Square Shank Slotted Tip Screwdriver 4" Blade, 1/4" Tip
1050 PIECE MASTER TOOL SETITEM NO. 97050 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 14
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
15Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
ST-1026S Square Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1028S Square Shank Slotted Tip Screwdriver 8" Blade, 3/8" TipST-1032S Square Shank Slotted Tip Screwdriver 12" Blade, 3/8" TipST-608S Torx® Screwdriver T8ST-627S Torx® Screwdriver T27ST-610S Torx® Screwdriver T10ST-615S Torx® Screwdriver T15ST-620S Torx® Screwdriver T20ST-625S Torx® Screwdriver T25ST-630S Torx® Screwdriver T309000-TP10 Tamper Resistant T10 Insert Bit9000-TP15 Tamper Resistant T15 Insert Bit9000-TP20 Tamper Resistant T20 Insert Bit9000-TP25 Tamper Resistant T25 Insert Bit9000-TP27 Tamper Resistant T27 Insert Bit900-70 Bit DriverPT-1128-1 6-1/2" Long Nose Sidecutting PlierPT-1002-1 6" Heavy Duty Slip JointPT-1003-1 8" Heavy Duty Slip JointPT-1004-1 10" Heavy Duty Slip JointPT-1107 Straight Jaw Locking PlierPT-1259 7" Battery PlierPT-1263 8" Parrot Nose PlierPT-1106 6" Long Nose Locking PlierPT-1052-1 6" Diagonal Cutting Plier PT-1057-1 7" Heavy-Duty Diagonal Cutting Plier PT-1251 5" Ignition PlierPT-3000 4 Pc Mini Long Reach Plier SetZW-53 13 Pc Hex Key Wrench Set .050- 3/8"ZW-59 13 Pc Long Hex Key Wrench Set ZW-69 9 Pc Metric Hex Key Wrench SetZT-1111 Carbon ScraperZT-1112 Degreasing ScraperZT-1310 Steel Wire Scratch BrushET-1071A Pullers Battery Terminal and Generator Bearing PullerMT-1049 25 Pc All Purpose Feeler GaugeDT-55 5 Pc Screw Extractor SetFT-1202 HacksawFT-1124 10 Pc Hacksaw Blades940-JS 40 Pc Insert Bit Set (J.S. Products)84-597 18 Pc Retaining Ring Plier Set66-039 6 Pc Jeweler Screwdriver Set10-099 Knife11-921 10 Knife Blades28-100 Scraper10-049 Pocket Knife11-040 6 Pc Blades33-212 Tape Measure 12' 68-768 76 Pc Tap & Die Set
Tap Wrench #73Tap Wrench #88Black Midget 401PThread Pitch Gauge MetricThread Pitch Gauge StandardDie Stock #26 1 Single HexTap Wrench #50Die 7/16-20 1 Single Hex Die Stock #57 5/8 Single HexDie 1/2-13 1 Single Hex Die 1/2-20 1 Single Hex Die 1/8-27 NPT 1 Single Hex Die 1/8-28 BSP 1 Single Hex Die 5/16-24 1 Single Hex Die 3/8-16 1 Single Hex Die 3/8-24 1 Single Hex
Die 7/16-14 1 Single Hex Die 12-24 5/8 Single Hex Die 1/4-20 1 Single Hex Die 1/4-28 1 Single Hex Die 5/16-18 1 Single Hex Die 8-32 5/8 Single Hex Die 10-24 5/8 Single Hex Die 10-32 5/8 Single Hex Die 6-32 5/8 Single Hex Die 12mm-1.75 1 Single Hex Die 4-40 5/8 Single Hex Die 10mm-1.5 1 Single Hex Die 11mm-1.5 1 Single Hex Die 12mm-1.5 1 Single Hex Die 9mm-1.25 1 Single Hex Die 10mm-1.25 1 Single Hex Die 8mm-1.25 1 Single Hex Die 9mm-1.0 1 Single Hex Die 7mm-1.0 1 Single Hex Die 8mm-1.0 1 Single Hex Die 5mm-0.9 5/8 Single Hex Die 6mm-1.0 5/8 Single Hex Die 4mm-0.75 5/8 Single Hex Die 5mm-0.8 5/8 Single Hex Die 4mm-0.7 5/8 Single Hex Die 3mm-0.5 5/8 Single Hex Tap 1/2-20 NF PlugTap 1/8-27 NPT PipeTap 1/2-13 NC PlugTap 7/16-20 NF PlugTap 7/16-14 NC PlugTap 3/8-24 NF PlugTap 3/8-16 NC PlugTap 5/16-24 NF PlugTap 1/4-28 NF PlugTap 5/16-18 NC PlugTap 1/4-20 NC PlugTap 12-24 NC Plug Tap 10-32 NF Plug Tap 10-24 NC Plug Tap 8-32 NC PlugTap 6-32 NC Plug Tap 4-40 NC PlugTap 12mm-1.75 PlugTap 12mm-1.5 PlugTap 11mm-1.5 PlugTap 10mm-1.5 PlugTap 10mm-1.25 Plug Tap 9mm-1.25 PlugTap 9mm-1.0 PlugTap 8mm-1.25 Plug Tap 8mm-1.0 PlugTap 7mm-1.0 PlugTap 6mm-1.0 PlugTap 5mm-0.9 PlugTap 5mm-0.8 PlugTap 4mm-0.75 PlugTap 4mm-0.7 PlugTap 3mm-0.5 PlugTap 1/8-28 BSP Pipe
1050 PIECE MASTER TOOL SETITEM NO. 97050 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 15
Visit us at...www.stanleyproto.com16
MA
ST
ER
SE
TS
835 PIECE MASTER TOOL SETITEM NO. 97835• Weight: 399 lbs.
450 Sockets & Accessories50 Wrenches27 Screwdrivers23 Punches & Chisels27 Pliers258 Miscellaneous Tools
Torx® is a registered trademark of Textron.
master.qxd 6/24/05 1:30 PM Page 16
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
17Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
GW-9550 1/4" Drive Spinner34960 1/4" Drive 1/4" X 3/8" Adapter9000H 1/4" Drive Bit HolderGW-9545 1/4" Drive Flexible SpinnerGW-9898 1/4" Drive Extension 3" GW-9899 1/4" Drive Extension 6" GW-9945B 1/4" Drive Round Head Reversible Ratchet34993 3/8" Drive Universal Joint34963 3/8" Drive 3/8" x 1/4" Adapter34966 3/8" Drive 3/8" x 1/2" Adapter34984 3/8" Drive Extension 11" 34989 3/8" Drive Extension 1-3/4" 34988 3/8" Drive Extension 3" 34987 3/8" Drive Extension 6" 34945B 3/8" Drive Round Head Reversible Ratchet34965 1/2" Drive 1/2" x 3/8" Adapter69992 1/2" Drive 1/2" x 3/4" Adapter49964 1/2" Drive Extension 2" 49966 1/2" Drive Extension 5" UW-24 1/2" Drive Impact Extension 5" UW-30 1/2" Drive Impact Extension 2-5/8" 49945B 1/2" Drive Round Head Reversible RatchetGW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-1705 12 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1706 12 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1707 12 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1708 12 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1709 12 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1710 12 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1711 12 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1712 12 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1714 12 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1716 12 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1507 6 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-1406 12 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1407 12 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1408 12 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1409 12 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1410 12 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1411 12 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1412 12 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1414 12 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1416 12 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mmGW-645M 6 Pt. Standard Metric Socket 1/4" Drive 4.5 mmGW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-655M 6 Pt. Standard Metric Socket 1/4" Drive 5.5 mm
GW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mmGW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mmGW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-705M 12 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-755M 12 Pt. Standard Metric Socket 1/4" Drive 5.5 mmGW-706M 12 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-707M 12 Pt. Standard Metric Socket 1/4" Drive 7 mmGW-708M 12 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-709M 12 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-710M 12 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-711M 12 Pt. Standard Metric Socket 1/4" Drive 11 mmGW-712M 12 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-713M 12 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-504M 6 Pt. Deep Metric Socket 1/4" Drive 4 mmGW-505M 6 Pt. Deep Metric Socket 1/4" Drive 5 mmGW-506M 6 Pt. Deep Metric Socket 1/4" Drive 6 mmGW-507M 6 Pt. Deep Metric Socket 1/4" Drive 7 mmGW-508M 6 Pt. Deep Metric Socket 1/4" Drive 8 mmGW-509M 6 Pt. Deep Metric Socket 1/4" Drive 9 mmGW-510M 6 Pt. Deep Metric Socket 1/4" Drive 10 mmGW-511M 6 Pt. Deep Metric Socket 1/4" Drive 11 mmGW-512M 6 Pt. Deep Metric Socket 1/4" Drive 12 mmGW-513M 6 Pt. Deep Metric Socket 1/4" Drive 13 mmGW-1605M 12 Pt. Deep Metric Socket 1/4" Drive 5 mmGW-1606M 12 Pt. Deep Metric Socket 1/4" Drive 6 mmGW-1607M 12 Pt. Deep Metric Socket 1/4" Drive 7 mmGW-1608M 12 Pt. Deep Metric Socket 1/4" Drive 8 mmGW-1609M 12 Pt. Deep Metric Socket 1/4" Drive 9 mmGW-1610M 12 Pt. Deep Metric Socket 1/4" Drive 10 mmGW-1611M 12 Pt. Deep Metric Socket 1/4" Drive 11 mmGW-1612M 12 Pt. Deep Metric Socket 1/4" Drive 12 mmGW-1613M 12 Pt. Deep Metric Socket 1/4" Drive 13 mmGW-1208 8 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1210 8 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1212 8 Pt. Standard Inch Socket 1/4" Drive 3/8"TS-1209 1/4" Torx® Socket Internal T9TS-1210 1/4" Torx® Socket Internal T10TS-1215 1/4" Torx® Socket Internal T15TS-1220 1/4" Torx® Socket Internal T20TS-1225 1/4" Torx® Socket Internal T25TS-1227 1/4" Torx® Socket Internal T27TS-1230 1/4" Torx® Socket Internal T30TS-1340 3/8" Drive Torx® Socket Internal T40TS-1345 3/8" Drive Torx® Socket Internal T45TS-1347 3/8" Drive Torx® Socket Internal T47TS-1350 3/8" Drive Torx® Socket Internal T50TR-3210 1/4" Tamper-Resistant Torx® Socket Internal T10TR-3215 1/4" Tamper-Resistant Torx® Socket Internal T15TR-3220 1/4" Tamper-Resistant Torx® Socket Internal T20TR-3225 1/4" Tamper-Resistant Torx® Socket Internal T25TR-3227 1/4" Tamper-Resistant Torx® Socket Internal T27TR-3230 1/4" Tamper-Resistant Torx® Socket Internal T30TS-2204 1/4" Torx® Socket External E4TS-2205 1/4" Torx® Socket External E5TS-2206 1/4" Torx® Socket External E6TS-2207 1/4" Torx® Socket External E7TS-2208 3/8" Drive Torx® Socket External E8TS-2310 3/8" Drive Torx® Socket External E10TS-2312 3/8" Drive Torx® Socket External E12
835 PIECE MASTER TOOL SETITEM NO. 97835
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 17
Visit us at...www.stanleyproto.com18
MA
ST
ER
SE
TS
TS-2314 3/8" Drive Torx® Socket External E14TS-2316 3/8" Drive Torx® Socket External E1630608 6 Pt. Standard Inch Socket 3/8" Drive 1/4"30010 6 Pt. Standard Inch Socket 3/8" Drive 5/16"30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"30630 6 Pt. Standard Inch Socket 3/8" Drive 15/16"30632 6 Pt. Standard Inch Socket 3/8" Drive 1"30010A 12 Pt. Standard Inch Socket 3/8" Drive 5/16"30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"300301 12 Pt. Standard Inch Socket 3/8" Drive 15/16"300321 12 Pt. Standard Inch Socket 3/8" Drive 1"HW-1510 6 Pt. Deep Inch Socket 3/8" Drive 5/16"HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"HW-1520 6 Pt. Deep Inch Socket 3/8" Drive 5/8"HW-1522 6 Pt. Deep Inch Socket 3/8" Drive 11/16"HW-1524 6 Pt. Deep Inch Socket 3/8" Drive 3/4"HW-1526 6 Pt. Deep Inch Socket 3/8" Drive 13/16"HW-1528 6 Pt. Deep Inch Socket 3/8" Drive 7/8"HW-1530 6 Pt. Deep Inch Socket 3/8" Drive 15/16"HW-1532 6 Pt. Deep Inch Socket 3/8" Drive 1"30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"30428 12 Pt. Deep Inch Socket 3/8" Drive 7/8"30430 12 Pt. Deep Inch Socket 3/8" Drive 15/16"30432 12 Pt. Deep Inch Socket 3/8" Drive 1"32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm32008M 6 Pt. Standard Metric Socket 3/8" Drive 8 mm32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm32020M 6 Pt. Standard Metric Socket 3/8" Drive 20 mm
32021M 6 Pt. Standard Metric Socket 3/8" Drive 21 mm32022M 6 Pt. Standard Metric Socket 3/8" Drive 22 mm34007M 12 Pt. Standard Metric Socket 3/8" Drive 7 mm34008M 12 Pt. Standard Metric Socket 3/8" Drive 8 mm34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm34020M 12 Pt. Standard Metric Socket 3/8" Drive 20 mm34021M 12 Pt. Standard Metric Socket 3/8" Drive 21 mm34022M 12 Pt. Standard Metric Socket 3/8" Drive 22 mmHW-1507M 6 Pt. Deep Metric Socket 3/8" Drive 7 mmHW-1508M 6 Pt. Deep Metric Socket 3/8" Drive 8 mmHW-1509M 6 Pt. Deep Metric Socket 3/8" Drive 9 mmHW-1510M 6 Pt. Deep Metric Socket 3/8" Drive 10 mmHW-1511M 6 Pt. Deep Metric Socket 3/8" Drive 11 mmHW-1512M 6 Pt. Deep Metric Socket 3/8" Drive 12 mmHW-1513M 6 Pt. Deep Metric Socket 3/8" Drive 13 mmHW-1514M 6 Pt. Deep Metric Socket 3/8" Drive 14 mmHW-1515M 6 Pt. Deep Metric Socket 3/8" Drive 15 mmHW-1517M 6 Pt. Deep Metric Socket 3/8" Drive 17 mmHW-1518M 6 Pt. Deep Metric Socket 3/8" Drive 18 mmHW-1519M 6 Pt. Deep Metric Socket 3/8" Drive 19 mmHW-1607M 12 Pt. Deep Metric Socket 3/8" Drive 7 mmHW-1608M 12 Pt. Deep Metric Socket 3/8" Drive 8 mmHW-1609M 12 Pt. Deep Metric Socket 3/8" Drive 9 mmHW-1610M 12 Pt. Deep Metric Socket 3/8" Drive 10 mmHW-1611M 12 Pt. Deep Metric Socket 3/8" Drive 11 mmHW-1612M 12 Pt. Deep Metric Socket 3/8" Drive 12 mmHW-1613M 12 Pt. Deep Metric Socket 3/8" Drive 13 mmHW-1614M 12 Pt. Deep Metric Socket 3/8" Drive 14 mmHW-1615M 12 Pt. Deep Metric Socket 3/8" Drive 15 mmHW-1616M 12 Pt. Deep Metric Socket 3/8" Drive 16 mmHW-1617M 12 Pt. Deep Metric Socket 3/8" Drive 17 mmHW-1618M 12 Pt. Deep Metric Socket 3/8" Drive 18 mmHW-1619M 12 Pt. Deep Metric Socket 3/8" Drive 19 mm31108 8 Pt. Standard Inch Socket 3/8" Drive 1/4"31110 8 Pt. Standard Inch Socket 3/8" Drive 5/16"31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"31114 8 Pt. Standard Inch Socket 3/8" Drive 7/16"31116 8 Pt. Standard Inch Socket 3/8" Drive 1/2"HW-1520S 3/8" Drive Spark Plug Socket 5/8"HW-1526S 3/8" Drive Spark Plug Socket 13/16"HW-9504 Slotted Screwdriver Bit Socket 3/16" Tip WidthHW-9505 Slotted Screwdriver Bit Socket 1/4" Tip WidthHW-9506 Slotted Screwdriver Bit Socket 5/16" Tip WidthHW-9450 Phillips® Screwdriver Bit Socket No. 1HW-9451 Phillips® Screwdriver Bit Socket No. 2HW-9452 Phillips® Screwdriver Bit Socket No. 3HW-9453 Phillips® Screwdriver Bit Socket No. 4HW-9442 3/8" Drive Hex Bit Socket Inch 1/8"HW-9443 3/8" Drive Hex Bit Socket Inch 9/64"HW-9444 3/8" Drive Hex Bit Socket Inch 5/32"HW-9449 3/8" Drive Hex Bit Socket Inch 3/16"HW-9448 3/8" Drive Hex Bit Socket Inch 7/32"HW-9447 3/8" Drive Hex Bit Socket Inch 1/4"HW-9446 3/8" Drive Hex Bit Socket Inch 5/16"
Phillips® is a registered trademark of Phillips Screw Co.
835 PIECE MASTER TOOL SETITEM NO. 97835 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 18
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
19Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
HW-9445 3/8" Drive Hex Bit Socket Inch 3/8"HW-9404M 3/8" Drive Hex Bit Socket Metric 4 mmHW-9405M 3/8" Drive Hex Bit Socket Metric 5 mmHW-9406M 3/8" Drive Hex Bit Socket Metric 6 mmHW-9407M 3/8" Drive Hex Bit Socket Metric 7 mmHW-9408M 3/8" Drive Hex Bit Socket Metric 8 mmHW-9410M 3/8" Drive Hex Bit Socket Metric 10 mm40612 6 Pt. Standard Inch Socket 1/2" Drive 3/8"40614 6 Pt. Standard Inch Socket 1/2" Drive 7/16"40616 6 Pt. Standard Inch Socket 1/2" Drive 1/2"40618 6 Pt. Standard Inch Socket 1/2" Drive 9/16"40620 6 Pt. Standard Inch Socket 1/2" Drive 5/8"40622 6 Pt. Standard Inch Socket 1/2" Drive 11/16"40624 6 Pt. Standard Inch Socket 1/2" Drive 3/4"40626 6 Pt. Standard Inch Socket 1/2" Drive 13/16"40628 6 Pt. Standard Inch Socket 1/2" Drive 7/8"40630 6 Pt. Standard Inch Socket 1/2" Drive 15/16"40632 6 Pt. Standard Inch Socket 1/2" Drive 1"40634 6 Pt. Standard Inch Socket 1/2" Drive 1-1/16"40636 6 Pt. Standard Inch Socket 1/2" Drive 1-1/8"40640 6 Pt. Standard Inch Socket 1/2" Drive 1-1/4"40642A 6 Pt. Standard Inch Socket 1/2" Drive 1-1/2"40112 12 Pt. Standard Inch Socket 1/2" Drive 3/8"40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"40132 12 Pt. Standard Inch Socket 1/2" Drive 1"40134 12 Pt. Standard Inch Socket 1/2" Drive 1-1/16"40136 12 Pt. Standard Inch Socket 1/2" Drive 1-1/8"40138 12 Pt. Standard Inch Socket 1/2" Drive 1-3/16"40144A 12 Pt. Standard Inch Socket 1/2" Drive 1-1/2"40316 12 Pt. Deep Inch Socket 1/2" Drive 1/2"40318 12 Pt. Deep Inch Socket 1/2" Drive 9/16"40320 12 Pt. Deep Inch Socket 1/2" Drive 5/8"40322 12 Pt. Deep Inch Socket 1/2" Drive 11/16"40324 12 Pt. Deep Inch Socket 1/2" Drive 3/4"40326 12 Pt. Deep Inch Socket 1/2" Drive 13/16"40328 12 Pt. Deep Inch Socket 1/2" Drive 7/8"40330 12 Pt. Deep Inch Socket 1/2" Drive 15/16"40332 12 Pt. Deep Inch Socket 1/2" Drive 1"40334 12 Pt. Deep Inch Socket 1/2" Drive 1-1/16"40336 12 Pt. Deep Inch Socket 1/2" Drive 1-18"42010M 6 Pt. Standard Metric Socket 1/2" Drive 10 mm42011M 6 Pt. Standard Metric Socket 1/2" Drive 11 mm42012M 6 Pt. Standard Metric Socket 1/2" Drive 12 mm42013M 6 Pt. Standard Metric Socket 1/2" Drive 13 mm42014M 6 Pt. Standard Metric Socket 1/2" Drive 14 mm43015M 6 Pt. Standard Metric Socket 1/2" Drive 15 mm43017M 6 Pt. Standard Metric Socket 1/2" Drive 17 mm43019M 6 Pt. Standard Metric Socket 1/2" Drive 19 mm43021M 6 Pt. Standard Metric Socket 1/2" Drive 21 mm43022M 6 Pt. Standard Metric Socket 1/2" Drive 22 mm43023M 6 Pt. Standard Metric Socket 1/2" Drive 23 mm43024M 6 Pt. Standard Metric Socket 1/2" Drive 24 mm43027M 6 Pt. Standard Metric Socket 1/2" Drive 27 mm43010M 12 Pt. Standard Metric Socket 1/2" Drive 10 mm43011M 12 Pt. Standard Metric Socket 1/2" Drive 11 mm43012M 12 Pt. Standard Metric Socket 1/2" Drive 12 mm
43013M 12 Pt. Standard Metric Socket 1/2" Drive 13 mm43014M 12 Pt. Standard Metric Socket 1/2" Drive 14 mm42015M 12 Pt. Standard Metric Socket 1/2" Drive 15 mm42016M 12 Pt. Standard Metric Socket 1/2" Drive 16 mm42017M 12 Pt. Standard Metric Socket 1/2" Drive 17 mm42018M 12 Pt. Standard Metric Socket 1/2" Drive 18 mm42019M 12 Pt. Standard Metric Socket 1/2" Drive 19 mm42020M 12 Pt. Standard Metric Socket 1/2" Drive 20 mm42021M 12 Pt. Standard Metric Socket 1/2" Drive 21 mm42022M 12 Pt. Standard Metric Socket 1/2" Drive 22 mm42023M 12 Pt. Standard Metric Socket 1/2" Drive 23 mm42024M 12 Pt. Standard Metric Socket 1/2" Drive 24 mm42025M 12 Pt. Standard Metric Socket 1/2" Drive 25 mm42026M 12 Pt. Standard Metric Socket 1/2" Drive 26 mm42027M 12 Pt. Standard Metric Socket 1/2" Drive 27 mm42028M 12 Pt. Standard Metric Socket 1/2" Drive 28 mm42030M 12 Pt. Standard Metric Socket 1/2" Drive 30 mm45010M 6 Pt. Deep Metric Socket 1/2" Drive 10 mm45011M 6 Pt. Deep Metric Socket 1/2" Drive 11 mm45012M 6 Pt. Deep Metric Socket 1/2" Drive 12 mm45013M 6 Pt. Deep Metric Socket 1/2" Drive 13 mm45014M 6 Pt. Deep Metric Socket 1/2" Drive 14 mm45015M 6 Pt. Deep Metric Socket 1/2" Drive 15 mm45016M 6 Pt. Deep Metric Socket 1/2" Drive 16 mm45017M 6 Pt. Deep Metric Socket 1/2" Drive 17 mm45018M 6 Pt. Deep Metric Socket 1/2" Drive 18 mm45019M 6 Pt. Deep Metric Socket 1/2" Drive 19 mm45020M 6 Pt. Deep Metric Socket 1/2" Drive 20 mm45021M 6 Pt. Deep Metric Socket 1/2" Drive 21 mm45022M 6 Pt. Deep Metric Socket 1/2" Drive 22 mm45023M 6 Pt. Deep Metric Socket 1/2" Drive 23 mm44012M 12 Pt. Deep Metric Socket 1/2" Drive 12 mm44013M 12 Pt. Deep Metric Socket 1/2" Drive 13 mm44014M 12 Pt. Deep Metric Socket 1/2" Drive 14 mm44015M 12 Pt. Deep Metric Socket 1/2" Drive 15 mm44016M 12 Pt. Deep Metric Socket 1/2" Drive 16 mm44017M 12 Pt. Deep Metric Socket 1/2" Drive 17 mm44018M 12 Pt. Deep Metric Socket 1/2" Drive 18 mm44019M 12 Pt. Deep Metric Socket 1/2" Drive 19 mm44020M 12 Pt. Deep Metric Socket 1/2" Drive 20 mm44021M 12 Pt. Deep Metric Socket 1/2" Drive 21 mm44022M 12 Pt. Deep Metric Socket 1/2" Drive 22 mm44023M 12 Pt. Deep Metric Socket 1/2" Drive 23 mm44024M 12 Pt. Deep Metric Socket 1/2" Drive 24 mm44025M 12 Pt. Deep Metric Socket 1/2" Drive 25 mm44026M 12 Pt. Deep Metric Socket 1/2" Drive 26 mm44027M 12 Pt. Deep Metric Socket 1/2" Drive 27 mm40326S 1/2" Drive Spark Plug Socket 13/16"40320S 1/2" Drive Spark Plug Socket 5/8"U-1508 6 Pt. Standard Inch Impact Socket 3/8" Drive 1/4"U-1510 6 Pt. Standard Inch Impact Socket 3/8" Drive 5/16"U-1512 6 Pt. Standard Inch Impact Socket 3/8" Drive 3/8"U-1514 6 Pt. Standard Inch Impact Socket 3/8" Drive 7/16"U-1516 6 Pt. Standard Inch Impact Socket 3/8" Drive 1/2"U-1518 6 Pt. Standard Inch Impact Socket 3/8" Drive 9/16"U-1520 6 Pt. Standard Inch Impact Socket 3/8" Drive 5/8"U-1522 6 Pt. Standard Inch Impact Socket 3/8" Drive 11/16"U-1524 6 Pt. Standard Inch Impact Socket 3/8" Drive 3/4"U-1508M 6 Pt. Standard Metric Impact Socket 3/8" Drive 8 mmU-1509M 6 Pt. Standard Metric Impact Socket 3/8" Drive 9 mmU-1510M 6 Pt. Standard Metric Impact Socket 3/8" Drive 10 mmU-1512M 6 Pt. Standard Metric Impact Socket 3/8" Drive 12 mmU-1513M 6 Pt. Standard Metric Impact Socket 3/8" Drive 13 mmU-1514M 6 Pt. Standard Metric Impact Socket 3/8" Drive 14 mm
835 PIECE MASTER TOOL SETITEM NO. 97835 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 19
Visit us at...www.stanleyproto.com20
MA
ST
ER
SE
TS
U-1515M 6 Pt. Standard Metric Impact Socket 3/8" Drive 15 mmU-1517M 6 Pt. Standard Metric Impact Socket 3/8" Drive 17 mmU-1518M 6 Pt. Standard Metric Impact Socket 3/8" Drive 18 mmU-1519M 6 Pt. Standard Metric Impact Socket 3/8" Drive 19 mmU-1610 6 Pt. Deep Inch Impact Socket 3/8" Drive 5/16"U-1612 6 Pt. Deep Inch Impact Socket 3/8" Drive 3/8"U-1614 6 Pt. Deep Inch Impact Socket 3/8" Drive 7/16"U-1616 6 Pt. Deep Inch Impact Socket 3/8" Drive 1/2"U-1618 6 Pt. Deep Inch Impact Socket 3/8" Drive 9/16"U-1620 6 Pt. Deep Inch Impact Socket 3/8" Drive 5/8"U-1622 6 Pt. Deep Inch Impact Socket 3/8" Drive 11/16"U-1624 6 Pt. Deep Inch Impact Socket 3/8" Drive 3/4"U-1608M 6 Pt. Deep Metric Impact Socket 3/8" Drive 8 mmU-1609M 6 Pt. Deep Metric Impact Socket 3/8" Drive 9 mmU-1610M 6 Pt. Deep Metric Impact Socket 3/8" Drive 10 mmU-1611M 6 Pt. Deep Metric Impact Socket 3/8" Drive 11 mmU-1612M 6 Pt. Deep Metric Impact Socket 3/8" Drive 12 mmU-1613M 6 Pt. Deep Metric Impact Socket 3/8" Drive 13 mmU-1614M 6 Pt. Deep Metric Impact Socket 3/8" Drive 14 mmU-1615M 6 Pt. Deep Metric Impact Socket 3/8" Drive 15 mmU-1616M 6 Pt. Deep Metric Impact Socket 3/8" Drive 16 mmU-1617M 6 Pt. Deep Metric Impact Socket 3/8" Drive 17 mmU-1618M 6 Pt. Deep Metric Impact Socket 3/8" Drive 18 mmU-1619M 6 Pt. Deep Metric Impact Socket 3/8" Drive 19 mmUW-1612 6 Pt. Standard Inch Impact Socket 1/2" Drive 3/8"UW-1614 6 Pt. Standard Inch Impact Socket 1/2" Drive 7/16"UW-1616 6 Pt. Standard Inch Impact Socket 1/2" Drive 1/2"UW-1618 6 Pt. Standard Inch Impact Socket 1/2" Drive 9/16"UW-1620 6 Pt. Standard Inch Impact Socket 1/2" Drive 5/8"UW-1622 6 Pt. Standard Inch Impact Socket 1/2" Drive 11/16"UW-1624 6 Pt. Standard Inch Impact Socket 1/2" Drive 3/4"UW-1626 6 Pt. Standard Inch Impact Socket 1/2" Drive 13/16"UW-1628 6 Pt. Standard Inch Impact Socket 1/2" Drive 7/8"UW-1630 6 Pt. Standard Inch Impact Socket 1/2" Drive 15/16"UW-1632 6 Pt. Standard Inch Impact Socket 1/2" Drive 1"UW-1634 6 Pt. Standard Inch Impact Socket 1/2" Drive 1-1/16"UW-1516 6 Pt. Deep Inch Impact Socket 1/2" Drive 1/2"UW-1518 6 Pt. Deep Inch Impact Socket 1/2" Drive 9/16"UW-1520 6 Pt. Deep Inch Impact Socket 1/2" Drive 5/8"UW-1522 6 Pt. Deep Inch Impact Socket 1/2" Drive 11/16"UW-1524 6 Pt. Deep Inch Impact Socket 1/2" Drive 3/4"UW-1526 6 Pt. Deep Inch Impact Socket 1/2" Drive 13/16"UW-1528 6 Pt. Deep Inch Impact Socket 1/2" Drive 7/8"UW-1530 6 Pt. Deep Inch Impact Socket 1/2" Drive 15/16"UW-1532 6 Pt. Deep Inch Impact Socket 1/2" Drive 1"UW-1534 6 Pt. Deep Inch Impact Socket 1/2" Drive 1-1/16"UW-610M 6 Pt. Standard Metric Impact Socket 1/2" Drive 10 mmUW-611M 6 Pt. Standard Metric Impact Socket 1/2" Drive 11 mmUW-612M 6 Pt. Standard Metric Impact Socket 1/2" Drive 12 mmUW-613M 6 Pt. Standard Metric Impact Socket 1/2" Drive 13 mmUW-614M 6 Pt. Standard Metric Impact Socket 1/2" Drive 14 mmUW-615M 6 Pt. Standard Metric Impact Socket 1/2" Drive 15 mmUW-616M 6 Pt. Standard Metric Impact Socket 1/2" Drive 16 mmUW-617M 6 Pt. Standard Metric Impact Socket 1/2" Drive 17 mmUW-618M 6 Pt. Standard Metric Impact Socket 1/2" Drive 18 mmUW-510M 6 Pt. Deep Metric Impact Socket 1/2" Drive 10 mmUW-511M 6 Pt. Deep Metric Impact Socket 1/2" Drive 11 mmUW-512M 6 Pt. Deep Metric Impact Socket 1/2" Drive 12 mmUW-513M 6 Pt. Deep Metric Impact Socket 1/2" Drive 13 mmUW-514M 6 Pt. Deep Metric Impact Socket 1/2" Drive 14 mmUW-515M 6 Pt. Deep Metric Impact Socket 1/2" Drive 15 mmUW-516M 6 Pt. Deep Metric Impact Socket 1/2" Drive 16 mmUW-517M 6 Pt. Deep Metric Impact Socket 1/2" Drive 17 mmUW-518M 6 Pt. Deep Metric Impact Socket 1/2" Drive 18 mm
UW-519M 6 Pt. Deep Metric Impact Socket 1/2" Drive 19 mmUW-520M 6 Pt. Deep Metric Impact Socket 1/2" Drive 20 mmBW-1156 Satin Finish - Combination Wrench 1/4"BW-1159 Satin Finish - Combination Wrench 5/16"BW-1160 Satin Finish - Combination Wrench 3/8"BW-1161 Satin Finish - Combination Wrench 7/16"BW-1162 Satin Finish - Combination Wrench 1/2"BW-1163 Satin Finish - Combination Wrench 9/16"BW-1164 Satin Finish - Combination Wrench 5/8"BW-1165 Satin Finish - Combination Wrench 11/16"BW-1166 Satin Finish - Combination Wrench 3/4"BW-1106M Satin Finish - Combination Wrench Metric 6 mmBW-1107M Satin Finish - Combination Wrench Metric 7 mmBW-1108M Satin Finish - Combination Wrench Metric 8 mmBW-1109M Satin Finish - Combination Wrench Metric 9 mmBW-1110M Satin Finish - Combination Wrench Metric 10 mmBW-1111M Satin Finish - Combination Wrench Metric 11 mmBW-1112M Satin Finish - Combination Wrench Metric 12 mmBW-1113M Satin Finish - Combination Wrench Metric 13 mmBW-1114M Satin Finish - Combination Wrench Metric 14 mmBW-1115M Satin Finish - Combination Wrench Metric 15 mmBW-1116M Satin Finish - Combination Wrench Metric 16 mmBWE-67MP Full Polish - Open End Wrench Metric 6 mm X 7 mm BWE-89MP Full Polish - Open End Wrench Metric 8 mm X 9 mmBWE-1011MP Full Polish - Open End Wrench Metric 10 mm X 11 mmBWE-1213MP Full Polish - Open End Wrench Metric 12 mm X 13 mmBWE-1415MP Full Polish - Open End Wrench Metric 14 mm X 15 mmBWE-1617MP Full Polish - Open End Wrench Metric 16 mm X 17 mmBWE-1819MP Full Polish - Open End Wrench Metric 18 mm X 19 mmBWE-2022MP Full Polish - Open End Wrench Metric 20 mm X 22 mm4020P Full Polish - Open End Wrench Inch 1/4" X 5/16"4723P Full Polish - Open End Wrench Inch 3/8" X 7/16"4724P Full Polish - Open End Wrench Inch 7/16" X 1/2"4725P Full Polish - Open End Wrench Inch 1/2" X 9/16"4727P Full Polish - Open End Wrench Inch 5/8" X 11/16"4728P Full Polish - Open End Wrench Inch 11/16" X 3/4"4732P Full Polish - Open End Wrench Inch 13/16" X 7/8"FN-1402P Flare Nut Wrench - Inch 3/8" X 7/16"FN-1404P Flare Nut Wrench - Inch 1/2" X 9/16"FN-1406P Flare Nut Wrench - Inch 5/8" X 11/16"FN-911MP Flare Nut Wrench - Metric 9 mm X 11 mmFN-1012MP Flare Nut Wrench - Metric 10 mm X 12 mmFN-1314MP Flare Nut Wrench - Metric 13 mm X 14 mm3114 Ignition Open End Wrench 13/64"3116 Ignition Open End Wrench 7/32"3118 Ignition Open End Wrench 15/64"3120 Ignition Open End Wrench 1/4"3122 Ignition Open End Wrench 17/64"3124 Ignition Open End Wrench 9/32"3128 Ignition Open End Wrench 5/16"3130 Ignition Open End Wrench 11/32"3132 Ignition Open End Wrench 3/8"3134 Ignition Open End Wrench 7/16"9000-A Adapter Socket900-20 Insert Bit # 0 Pt. Phillips®
900-21 Insert Bit # 1 Pt. Phillips®
900-22 Insert Bit # 2 Pt. Phillips®
900-23 Insert Bit # 3 Pt. Phillips®
900-0 Insert Bit Slotted Bit, 7/64"900-5 Insert Bit Slotted Bit, 7/32"900-1 Insert Bit Slotted Bit, 1/8"900-2 Insert Bit Slotted Bit, 9/64"900-8 Insert Bit Slotted Bit, 5/16"900-3 Insert Bit Slotted Bit, 5/32"
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
835 PIECE MASTER TOOL SETITEM NO. 97835 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 20
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
21Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
900-4 Insert Bit Slotted Bit, 3/16"900-6 Insert Bit Slotted Bit, 1/4"900-7 Insert Bit Slotted Bit, 9/32"900-30 Insert Bit Square Head, #0900-31 Insert Bit Square Head, #1900-32 Insert Bit Square Head, #2900-33 Insert Bit Square Head, #3900-40 Insert Bit Reed Prince #0 (Pozi)900-41 Insert Bit Reed Prince #1 (Pozi)900-42 Insert Bit Reed Prince #2 (Pozi)900-43 Insert Bit Reed Prince #3 (Pozi)900-51 Insert Bit Phillips® ARC, #1900-52 Insert Bit Phillips® ARC, #2900-53 Insert Bit Phillips® ARC, #39000-TP10 Insert Bit Tamper Resistant T109000-TP15 Insert Bit Tamper Resistant T159000-TP20 Insert Bit Tamper Resistant T209000-TP25 Insert Bit Tamper Resistant T259000-TP27 Insert Bit Tamper Resistant T27900-60 Hex Bit, 5/64"900-61 Hex Bit, 1/8"900-62 Hex Bit, 5/32900-63 Hex Bit, 3/16"900-64 Hex Bit, 1/4"9000-T6 Torx® Bit T69000-T7 Torx® Bit T79000-T8 Torx® Bit T89000-T10 Torx® Bit T109000-T15 Torx® Bit T159000-T20 Torx® Bit T209000-T25 Torx® Bit T259000-T27 Torx® Bit T279000-T30 Torx® Bit T309000-T40 Torx® Bit T40PT-1128-1 6" Long Nose Sidecutting PlierPT-1052-1 6" Diagonal Cutting PlierPT-1003-1 8" Heavy Duty Slip JointPT-1251 5" Ignition PlierPT-1004-1 10" Heavy Duty Slip JointPT-1002-1 6" Heavy Duty Slip JointPT-1108-1 Lieman's PliersPT-1287 External Retaining Ring PliersPT-1288 Internal Retaining Ring PliersCT-114 14 Pc Chisel and Punch SetCT-1303 Center Punch 5" Length, 5/32" PointCT-1306 Center Punch 6" Length, 1/4" PointCT-1404 Hand Punch 3/8" L 5"CT-1554 Long Taper Punch 1/2 L 8-1/2"CT-1556 Long Taper Punch 1/2" L 9"CT-1108 Long Cold Chisel 3/4" L12"CT-1110 Long Cold Chisel 7/8" L12"ST-801 Nut Driver Inch 9/32"ST-800 Nut Driver Inch 3/16"ST-803 Nut Driver Inch 1/4"ST-806 Nut Driver Inch 5/16"ST-809 Nut Driver Inch 11/32"ST-812 Nut Driver Inch 3/8"ST-815 Nut Driver Inch 7/16"ST-818 Nut Driver Inch 1/2"ST-904M Nut Driver Metric 4 mmST-905M Nut Driver Metric 5 mmST-955M Nut Driver Metric 5.5 mmST-907M Nut Driver Metric 7 mmST-908M Nut Driver Metric 8 mm
ST-909M Nut Driver Metric 9 mmST-910M Nut Driver Metric 10 mmST-911M Nut Driver Metric 11 mmST-912M Nut Driver Metric 12 mmST-1183 Offset Screwdriver 3/16"ST-1184 Offset Screwdriver 3/16"ST-1185 Offset Screwdriver 1/4"ST-1043S Electrician's Slotted Tip Screwdriver 3" Blade, 3/16" TipST-1046S Electrician's Slotted Tip Screwdriver 6" Blade, 3/16" TipST-1048S Electrician's Slotted Tip Screwdriver 8" Blade, 3/16" TipST-1081S Phillips® Tip Screwdriver 3" Blade, No. 1 Pt.ST-1082S Phillips® Tip Screwdriver 4" Blade, No. 2 Pt.ST-1083S Phillips® Tip Screwdriver 6" Blade, No. 3 Pt.ST-1084S Phillips® Tip Screwdriver 8" Blade, No. 4 Pt.ST-1140S Stubby Phillips® Tip Screwdriver 1-1/2" Blade, No. 2 Pt.ST-1145S Stubby Slotted Tip Screwdriver 1-1/4" Blade, 7/32" TipST-1150S Pocket-Size Slotted Tip Screwdriver With Clip 2" Blade, 1/8" TipST-1004S Round Shank Slotted Tip Screwdriver 4" Blade, 1/4" TipST-1006S Round Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1008S Round Shank Slotted Tip Screwdriver 8" Blade, 3/8" TipST-1024S Square Shank Slotted Tip Screwdriver 4" Blade, 1/4" TipST-1026S Square Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1028S Square Shank Slotted Tip Screwdriver 8" Blade, 3/8" TipST-1032S Square Shank Slotted Tip Screwdriver 12" Blade, 3/8" TipST-608S Torx® Screwdriver T8ST-627S Torx® Screwdriver T27ST-610S Torx® Screwdriver T10ST-615S Torx® Screwdriver T15ST-620S Torx® Screwdriver T20ST-625S Torx® Screwdriver T25ST-630S Torx® Screwdriver T30ZW-53 13 Pc Hex Key Wrench Set .050- 3/8"ZW-59 13 Pc Long Hex Key Wrench Set ZW-69 9 Pc Metric Hex Key Wrench SetHT-1005-1 Ball Pein Hammer 16ozHT-1452 Soft Face Hammer 5oz.MT-1049 All Purpose Feeler GaugeMT-1024 Spark Plug and Ignition Feeler GaugeMT-1026A 6-Wire High Energy Spark Plug Feeler GaugeMT-1027A 7-Wire Spark Plug Feeler GaugeST-1250 Inspection MirrorST-1214 Spark Detector ScrewdriverZT-1301 Carbon Cleaning End BrushZT-1300 Heavy-Duty Knot End Cleaning BrushZT-1312 Heavy-Duty Scratch Brush With ScraperZT-1310 Steel Wire Scratch BrushZT-1111 Carbon ScraperZT-1112 Degreasing Scraper84-597 18 Pc Retaining Ring Plier Set10-099 Knife11-921 10 Heavy Duty Utility Blades11-987 10 Round Point Utility Blades33-212 Tape Measure 12"10-049 Pocket Knife11-040 Blades (Qty. 10)FT-1202 HacksawFT-1124 10 Pc Hacksaw Blades68-768 76 Pc Tap and Die SetDT-55 5 Pc Screw Extractor Set
835 PIECE MASTER TOOL SETITEM NO. 97835 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 21
Visit us at...www.stanleyproto.com22
MA
ST
ER
SE
TS
624 PIECE MASTER TOOL SETITEM NO. 97624• Weight: 298 lbs.
335 Sockets & Accessories77 Wrenches21 Screwdrivers23 Punches & Chisels23 Pliers145 Miscellaneous Tools
master.qxd 6/24/05 1:30 PM Page 22
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
23Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"
GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-1705 12 Pt. Standard Inch Socket 1/4" Drive 5/32"
GW-1706 12 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1707 12 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1708 12 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1709 12 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1710 12 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1711 12 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1712 12 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1714 12 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1716 12 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"
GW-1507 6 Pt. Deep Inch Socket 1/4" Drive 7/32"
GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"
GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"
GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"
GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"
GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"
GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"
GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"
GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mm
GW-645M 6 Pt. Standard Metric Socket 1/4" Drive 4.5 mm
GW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mm
GW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mm
GW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mm
GW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mm
GW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mm
GW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mm
GW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mm
GW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mm
GW-705M 12 Pt. Standard Metric Socket 1/4" Drive 5 mm
GW-755M 12 Pt. Standard Metric Socket 1/4" Drive 5.5 mm
GW-706M 12 Pt. Standard Metric Socket 1/4" Drive 6 mm
GW-707M 12 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-708M 12 Pt. Standard Metric Socket 1/4" Drive 8 mm
GW-709M 12 Pt. Standard Metric Socket 1/4" Drive 9 mm
GW-710M 12 Pt. Standard Metric Socket 1/4" Drive 10 mm
GW-711M 12 Pt. Standard Metric Socket 1/4" Drive 11 mm
GW-712M 12 Pt. Standard Metric Socket 1/4" Drive 12 mm
GW-713M 12 Pt. Standard Metric Socket 1/4" Drive 13 mm
GW-504M 6 Pt. Deep Metric Socket 1/4" Drive 4 mm
GW-505M 6 Pt. Deep Metric Socket 1/4" Drive 5 mm
GW-506M 6 Pt. Deep Metric Socket 1/4" Drive 6 mm
GW-507M 6 Pt. Deep Metric Socket 1/4" Drive 7 mm
GW-508M 6 Pt. Deep Metric Socket 1/4" Drive 8 mm
GW-509M 6 Pt. Deep Metric Socket 1/4" Drive 9 mm
GW-510M 6 Pt. Deep Metric Socket 1/4" Drive 10 mm
GW-511M 6 Pt. Deep Metric Socket 1/4" Drive 11 mm
GW-512M 6 Pt. Deep Metric Socket 1/4" Drive 12 mm
GW-513M 6 Pt. Deep Metric Socket 1/4" Drive 3 mm
GW-9945B 1/4" Drive Round Head Reversible Ratchet
GW-9550 1/4" Drive Spinner
34960 1/4" Drive 1/4" X 3/8" Adapter
GW-9898 1/4" Drive Extension 3"
GW-9899 1/4" Drive Extension 6"
GW-9749B 1/4" Drive Flex Handle Ratchet
30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"
30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"
30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"
30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"
30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"
30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"
30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"
30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"
30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"
30630 6 Pt. Standard Inch Socket 3/8" Drive 15/16"
30632 6 Pt. Standard Inch Socket 3/8" Drive 1"
31108 8 Pt. Standard Inch Socket 3/8" Drive 1/4"
31110 8 Pt. Standard Inch Socket 3/8" Drive 5/16"
31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"
31114 8 Pt. Standard Inch Socket 3/8" Drive 7/16"
31116 8 Pt. Standard Inch Socket 3/8" Drive 1/2"
HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"
HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"
HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"
HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"
HW-1520 6 Pt. Deep Inch Socket 3/8" Drive 5/8"
HW-1522 6 Pt. Deep Inch Socket 3/8" Drive 11/16"
HW-1524 6 Pt. Deep Inch Socket 3/8" Drive 3/4"
HW-1526 6 Pt. Deep Inch Socket 3/8" Drive 13/16"
HW-1528 6 Pt. Deep Inch Socket 3/8" Drive 7/8"
U-1508 6 Pt. Standard Inch Impact Socket 3/8" Drive 1/4"
U-1510 6 Pt. Standard Inch Impact Socket 3/8" Drive 5/16"
U-1512 6 Pt. Standard Inch Impact Socket 3/8" Drive 3/8"
U-1514 6 Pt. Standard Inch Impact Socket 3/8" Drive 7/16"
U-1516 6 Pt. Standard Inch Impact Socket 3/8" Drive 1/2"
U-1518 6 Pt. Standard Inch Impact Socket 3/8" Drive 9/16"
U-1520 6 Pt. Standard Inch Impact Socket 3/8" Drive 5/8"
U-1522 6 Pt. Standard Inch Impact Socket 3/8" Drive 11/16"
30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"
30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"
30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"
30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"
30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"
30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"
30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"
30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"
30428 12 Pt. Deep Inch Socket 3/8" Drive 7/8"
30430 12 Pt. Deep Inch Socket 3/8" Drive 15/16"
30432 12 Pt. Deep Inch Socket 3/8" Drive 1"
624 PIECE MASTER TOOL SETITEM NO. 97624
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 23
Visit us at...www.stanleyproto.com24
MA
ST
ER
SE
TS
30010A 12 Pt. Standard Inch Socket 3/8" Drive 5/16"
30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"
30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"
30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"
30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"
30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"
30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"
30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"
30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"
30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"
32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm
32008M 6 Pt. Standard Metric Socket 3/8" Drive 8 mm
32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm
32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm
32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm
32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm
32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm
32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm
32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm
32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm
32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm
32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm
32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm
32020M 6 Pt. Standard Metric Socket 3/8" Drive 20 mm
32021M 6 Pt. Standard Metric Socket 3/8" Drive 21 mm
34007M 12 Pt. Standard Metric Socket 3/8" Drive 7 mm
34008M 12 Pt. Standard Metric Socket 3/8" Drive 8 mm
34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm
34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm
34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm
34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm
34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm
34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm
34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm
34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm
34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm
34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm
34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm
34020M 12 Pt. Standard Metric Socket 3/8" Drive 20 mm
34021M 12 Pt. Standard Metric Socket 3/8" Drive 21 mm
34022M 12 Pt. Standard Metric Socket 3/8" Drive 22 mm
U-1510M 6 Pt. Standard Metric Impact Socket 3/8" Drive 10 mm
U-1512M 6 Pt. Standard Metric Impact Socket 3/8" Drive 12 mm
U-1513M 6 Pt. Standard Metric Impact Socket 3/8" Drive 13 mm
U-1514M 6 Pt. Standard Metric Impact Socket 3/8" Drive 14 mm
U-1515M 6 Pt. Standard Metric Impact Socket 3/8" Drive 15 mm
U-1517M 6 Pt. Standard Metric Impact Socket 3/8" Drive 17 mm
U-1518M 6 Pt. Standard Metric Impact Socket 3/8" Drive 18 mm
U-1519M 6 Pt. Standard Metric Impact Socket 3/8" Drive 19 mm
HW-9404M 3/8" Drive Hex Bit Socket Metric 4 mm
HW-9405M 3/8" Drive Hex Bit Socket Metric 5 mm
HW-9406M 3/8" Drive Hex Bit Socket Metric 6 mm
HW-9407M 3/8" Drive Hex Bit Socket Metric 7 mm
HW-9408M 3/8" Drive Hex Bit Socket Metric 8 mm
HW-9410M 3/8" Drive Hex Bit Socket Metric 10 mm
HW-9450 Phillips® Screwdriver Bit Socket No. 1
HW-9452 Phillips® Screwdriver Bit Socket No. 3
HW-9405 Slotted Screwdriver Bit Socket 5/16" Tip Width
HW-9505 Slotted Screwdriver Bit Socket 1/4" Tip Width
HW-9506 Slotted Screwdriver Bit Socket 3/16" Tip Width
HW-9451 Phillips® Screwdriver Bit Socket No. 2
HW-9442 3/8" Drive Hex Bit Socket Inch 1/8"
HW-9443 3/8" Drive Hex Bit Socket Inch 9/64"
HW-9444 3/8" Drive Hex Bit Socket Inch 5/32"
HW-9449 3/8" Drive Hex Bit Socket Inch 3/16"
HW-9448 3/8" Drive Hex Bit Socket Inch 7/32"
HW-9447 3/8" Drive Hex Bit Socket Inch 1/4"
HW-9446 3/8" Drive Hex Bit Socket Inch 5/16"
HW-9445 3/8" Drive Hex Bit Socket Inch 3/8"
34989 3/8" Drive Extension 1-3/4"
34983 3/8" Drive Extension 19"
30320S 3/8" Drive Spark Plug Socket 5/8" Universal
30326 3/8" Drive Spark Plug Socket 13/16" Universal
34945B 3/8" Drive Round Head Reversible Ratchet
34988 3/8" Drive Extension 3"
34987 3/8" Drive Extension 6"
34993 3/8" Drive Universal Joint
34963 3/8" Drive 3/8" x 1/4" Adapter
HW-1520S 3/8" Drive Spark Plug Socket 5/8"
HW-1526S 3/8" Drive Spark Plug Socket 13/16"
40612 6 Pt. Standard Inch Socket 1/2" Drive 3/8"
40614 6 Pt. Standard Inch Socket 1/2" Drive 7/16"
40616 6 Pt. Standard Inch Socket 1/2" Drive 1/2"
40618 6 Pt. Standard Inch Socket 1/2" Drive 9/16"
40620 6 Pt. Standard Inch Socket 1/2" Drive 5/8"
40622 6 Pt. Standard Inch Socket 1/2" Drive 11/16"
40624 6 Pt. Standard Inch Socket 1/2" Drive 3/4"
40626 6 Pt. Standard Inch Socket 1/2" Drive 13/16"
40628 6 Pt. Standard Inch Socket 1/2" Drive 7/8"
40630 6 Pt. Standard Inch Socket 1/2" Drive 15/16"
40632 6 Pt. Standard Inch Socket 1/2" Drive 1"
40634 6 Pt. Standard Inch Socket 1/2" Drive 1-1/16"
40636 6 Pt. Standard Inch Socket 1/2" Drive 1-1/8"
40112 12 Pt. Standard Inch Socket 1/2" Drive 3/8"
40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"
40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"
40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"
40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"
40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"
40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"
40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"
40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"
40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"
40132 12 Pt. Standard Inch Socket 1/2" Drive 1"
40134 12 Pt. Standard Inch Socket 1/2" Drive 1-1/16"
40136 12 Pt. Standard Inch Socket 1/2" Drive 1-1/8"
40138 12 Pt. Standard Inch Socket 1/2" Drive 1-3/16"
40140 12 Pt. Standard Inch Socket 1/2" Drive 1-1/4"
40416 6 Pt. Deep Inch Socket 1/2" Drive 1/2"
40418 6 Pt. Deep Inch Socket 1/2" Drive 9/16"
624 PIECE MASTER TOOL SETITEM NO. 97624 (CONTINUED)
Contents Description Contents Description
Phillips® is a registered trademark of Phillips Screw Co.
master.qxd 6/24/05 1:30 PM Page 24
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
25Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
40420 6 Pt. Deep Inch Socket 1/2" Drive 5/8"
40422 6 Pt. Deep Inch Socket 1/2" Drive 11/16"
40424 6 Pt. Deep Inch Socket 1/2" Drive 3/4"
40426 6 Pt. Deep Inch Socket 1/2" Drive 13/16"
40428 6 Pt. Deep Inch Socket 1/2" Drive 7/8"
40430 6 Pt. Deep Inch Socket 1/2" Drive 15/16"
40432 6 Pt. Deep Inch Socket 1/2" Drive 1"
40316 12 Pt. Deep Inch Socket 1/2" Drive 1/2"
40318 12 Pt. Deep Inch Socket 1/2" Drive 9/16"
40320 12 Pt. Deep Inch Socket 1/2" Drive 5/8"
40322 12 Pt. Deep Inch Socket 1/2" Drive 11/16"
40324 12 Pt. Deep Inch Socket 1/2" Drive 3/4"
40326 12 Pt. Deep Inch Socket 1/2" Drive 13/16"
40328 12 Pt. Deep Inch Socket 1/2" Drive 7/8"
40330 12 Pt. Deep Inch Socket 1/2" Drive 15/16"
40332 12 Pt. Deep Inch Socket 1/2" Drive 1"
UW-1614 6 Pt. Standard Inch Impact Socket 1/2" Drive 7/16"
UW-1616 6 Pt. Standard Inch Impact Socket 1/2" Drive 1/2"
UW-1618 6 Pt. Standard Inch Impact Socket 1/2" Drive 9/16"
UW-1620 6 Pt. Standard Inch Impact Socket 1/2" Drive 5/8"
UW-1622 6 Pt. Standard Inch Impact Socket 1/2" Drive 11/16"
UW-1624 6 Pt. Standard Inch Impact Socket 1/2" Drive 3/4"
UW-1626 6 Pt. Standard Inch Impact Socket 1/2" Drive 13/16"
UW-1628 6 Pt. Standard Inch Impact Socket 1/2" Drive 7/8"
UW-1630 6 Pt. Standard Inch Impact Socket 1/2" Drive 15/16"
UW-1632 6 Pt. Standard Inch Impact Socket 1/2" Drive 1"
UW-1634 6 Pt. Standard Inch Impact Socket 1/2" Drive 1-1/16"
42010M 6 Pt. Standard Metric Socket 1/2" Drive 10 mm
42011M 6 Pt. Standard Metric Socket 1/2" Drive 11 mm
42012M 6 Pt. Standard Metric Socket 1/2" Drive 12 mm
42013M 6 Pt. Standard Metric Socket 1/2" Drive 13 mm
42014M 6 Pt. Standard Metric Socket 1/2" Drive 14 mm
43015M 6 Pt. Standard Metric Socket 1/2" Drive 15 mm
43017M 6 Pt. Standard Metric Socket 1/2" Drive 17 mm
43019M 6 Pt. Standard Metric Socket 1/2" Drive 19 mm
43021M 6 Pt. Standard Metric Socket 1/2" Drive 21 mm
43022M 6 Pt. Standard Metric Socket 1/2" Drive 22 mm
43023M 6 Pt. Standard Metric Socket 1/2" Drive 23 mm
43024M 6 Pt. Standard Metric Socket 1/2" Drive 24 mm
43027M 6 Pt. Standard Metric Socket 1/2" Drive 27 mm
43010M 12 Pt. Standard Metric Socket 1/2" Drive 10 mm
43011M 12 Pt. Standard Metric Socket 1/2" Drive 11 mm
43012M 12 Pt. Standard Metric Socket 1/2" Drive 12 mm
43013M 12 Pt. Standard Metric Socket 1/2" Drive 13 mm
43014M 12 Pt. Standard Metric Socket 1/2" Drive 14 mm
42015M 12 Pt. Standard Metric Socket 1/2" Drive 15 mm
42017M 12 Pt. Standard Metric Socket 1/2" Drive 17 mm
42019M 12 Pt. Standard Metric Socket 1/2" Drive 19 mm
42021M 12 Pt. Standard Metric Socket 1/2" Drive 21 mm
42022M 12 Pt. Standard Metric Socket 1/2" Drive 22 mm
42023M 12 Pt. Standard Metric Socket 1/2" Drive 23 mm
42024M 12 Pt. Standard Metric Socket 1/2" Drive 24 mm
42027M 12 Pt. Standard Metric Socket 1/2" Drive 27 mm
44010M 12 Pt. Deep Metric Socket 1/2" Drive 10 mm
44011M 12 Pt. Deep Metric Socket 1/2" Drive 11 mm
44012M 12 Pt. Deep Metric Socket 1/2" Drive 12 mm
44013M 12 Pt. Deep Metric Socket 1/2" Drive 13 mm
44014M 12 Pt. Deep Metric Socket 1/2" Drive 14 mm
44015M 12 Pt. Deep Metric Socket 1/2" Drive 15 mm
44016M 12 Pt. Deep Metric Socket 1/2" Drive 16 mm
44017M 12 Pt. Deep Metric Socket 1/2" Drive 17 mm
44018M 12 Pt. Deep Metric Socket 1/2" Drive 18 mm
44019M 12 Pt. Deep Metric Socket 1/2" Drive 19 mm
44020M 12 Pt. Deep Metric Socket 1/2" Drive 20 mm
44021M 12 Pt. Deep Metric Socket 1/2" Drive 21 mm
44022M 12 Pt. Deep Metric Socket 1/2" Drive 22 mm
44023M 12 Pt. Deep Metric Socket 1/2" Drive 23 mm
44024M 12 Pt. Deep Metric Socket 1/2" Drive 24 mm
44025M 12 Pt. Deep Metric Socket 1/2" Drive 25 mm
44026M 12 Pt. Deep Metric Socket 1/2" Drive 26 mm
44027M 12 Pt. Deep Metric Socket 1/2" Drive 27 mm
UW-614M 6 Pt. Standard Metric Impact Socket 1/2" Drive 14 mm
UW-615M 6 Pt. Standard Metric Impact Socket 1/2" Drive 15 mm
UW-616M 6 Pt. Standard Metric Impact Socket 1/2" Drive 16 mm
UW-617M 6 Pt. Standard Metric Impact Socket 1/2" Drive 17 mm
UW-618M 6 Pt. Standard Metric Impact Socket 1/2" Drive 18 mm
UW-619M 6 Pt. Standard Metric Impact Socket 1/2" Drive 19 mm
UW-621M 6 Pt. Standard Metric Impact Socket 1/2" Drive 21 mm
UW-622M 6 Pt. Standard Metric Impact Socket 1/2" Drive 22 mm
UW-624M 6 Pt. Standard Metric Impact Socket 1/2" Drive 24 mm
UW-627M 6 Pt. Standard Metric Impact Socket 1/2" Drive 27 mm
40320S 1/2" Drive Spark Plug Socket 5/8"
40326S 1/2" Drive Spark Plug Socket 13/16"
69992 1/2" Drive 1/2" x 3/4" Adapter
49945B 1/2" Drive Round Head Reversible Ratchet
49964 1/2" Drive Extension 2"
49966 1/2" Drive Extension 5"
49990 1/2" Drive Extension 10"
49978 1/2" Drive Universal Joint
34965 1/2" Drive 1/2" x 3/8" Adapter
60026A 12 Pt. Standard Inch Socket 3/4" Drive 3/4"
60027A 12 Pt. Standard Inch Socket 3/4" Drive 13/16"
60028 12 Pt. Standard Inch Socket 3/4" Drive 7/8"
60030 12 Pt. Standard Inch Socket 3/4" Drive 15/16"
60032 12 Pt. Standard Inch Socket 3/4" Drive 1"
60034 12 Pt. Standard Inch Socket 3/4" Drive 1-1/16"
60036 12 Pt. Standard Inch Socket 3/4" Drive 1-1/8"
60038 12 Pt. Standard Inch Socket 3/4" Drive 1-3/16"
60040 12 Pt. Standard Inch Socket 3/4" Drive 1-1/4"
60042 12 Pt. Standard Inch Socket 3/4" Drive 1-5/16"
60044 12 Pt. Standard Inch Socket 3/4" Drive 1-3/8"
61019M 12 Pt. Standard Metric Socket 3/4" Drive 19 mm
61021M 12 Pt. Standard Metric Socket 3/4" Drive 21 mm
61022M 12 Pt. Standard Metric Socket 3/4" Drive 22 mm
61023M 12 Pt. Standard Metric Socket 3/4" Drive 23 mm
61024M 12 Pt. Standard Metric Socket 3/4" Drive 24 mm
61025M 12 Pt. Standard Metric Socket 3/4" Drive 25 mm
61026M 12 Pt. Standard Metric Socket 3/4" Drive 26 mm
61027M 12 Pt. Standard Metric Socket 3/4" Drive 27 mm
61028M 12 Pt. Standard Metric Socket 3/4" Drive 28 mm
624 PIECE MASTER TOOL SETITEM NO. 97624 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 25
Visit us at...www.stanleyproto.com26
MA
ST
ER
SE
TS
61029M 12 Pt. Standard Metric Socket 3/4" Drive 29 mm
61030M 12 Pt. Standard Metric Socket 3/4" Drive 30 mm
69945B 3/4" Drive Round Head Reversible Ratchet
49991 3/4" Drive 3/4" x 1/2" Adapter
69993 3/4" Drive Extension 4"
BW-1160 Satin Finish - Combination Wrench 3/8"
BW-1161 Satin Finish - Combination Wrench 7/16"
BW-1162 Satin Finish - Combination Wrench 1/2"
BW-1163 Satin Finish - Combination Wrench 9/16"
BW-1164 Satin Finish - Combination Wrench 5/8"
BW-1165 Satin Finish - Combination Wrench 11/16"
BW-1166 Satin Finish - Combination Wrench 3/4"
BW-1167A Satin Finish - Combination Wrench 13/16"
BW-1167 Satin Finish - Combination Wrench 7/8"
BW-1168 Satin Finish - Combination Wrench 15/16"
BW-1170 Satin Finish - Combination Wrench 1"
BW-1106M Satin Finish - Combination Wrench Metric 6 mm
BW-1107M Satin Finish - Combination Wrench Metric 7 mm
BW-1108M Satin Finish - Combination Wrench Metric 8 mm
BW-1109M Satin Finish - Combination Wrench Metric 9 mm
BW-1110M Satin Finish - Combination Wrench Metric 10 mm
BW-1111M Satin Finish - Combination Wrench Metric 11 mm
BW-1112M Satin Finish - Combination Wrench Metric 12 mm
BW-1113M Satin Finish - Combination Wrench Metric 13 mm
BW-1114M Satin Finish - Combination Wrench Metric 14 mm
BW-1115M Satin Finish - Combination Wrench Metric 15 mm
BW-1116M Satin Finish - Combination Wrench Metric 16 mm
4020P Full Polish - Open End Wrench Inch 1/4" X 5/16"
4723P Full Polish - Open End Wrench Inch 3/8" X 7/16"
4724P Full Polish - Open End Wrench Inch 7/16" X 1/2"
4725P Full Polish - Open End Wrench Inch 1/2" X 9/16"
4727P Full Polish - Open End Wrench Inch 5/8" X 11/16"
4728P Full Polish - Open End Wrench Inch 11/16" X 3/4"
4732P Full Polish - Open End Wrench Inch 13/16" X 7/8"
4033P Full Polish - Open End Wrench Inch 15/16" X 1"
BCF-12 Crowfoot Wrench - Inch 3/8"
BCF-14 Crowfoot Wrench - Inch 7/16"
BCF-16 Crowfoot Wrench - Inch 1/2"
BCF-18 Crowfoot Wrench - Inch 9/16"
BCF-20 Crowfoot Wrench - Inch 5/8"
BCF-22 Crowfoot Wrench - Inch 11/16"
BCF-24 Crowfoot Wrench - Inch 3/4"
BCF-26 Crowfoot Wrench - Inch 13/16"
BCF-28 Crowfoot Wrench - Inch 7/8"
BCF-32 Crowfoot Wrench - Inch 1"
BCF-10M Crowfoot Wrench - Metric 10 mm
BCF-11M Crowfoot Wrench - Metric 11 mm
BCF-12M Crowfoot Wrench - Metric 12 mm
BCF-13M Crowfoot Wrench - Metric 13 mm
BCF-14M Crowfoot Wrench - Metric 14 mm
BCF-15M Crowfoot Wrench - Metric 15 mm
BCF-17M Crowfoot Wrench - Metric 17 mm
BCF-19M Crowfoot Wrench - Metric 19 mm
BCF-21M Crowfoot Wrench - Metric 21 mm
BCF-22M Crowfoot Wrench - Metric 22 mm
AW-1004-1 Adjustable Wrench 4"
AW-1006-1 Adjustable Wrench 6"
AW-1008-1 Adjustable Wrench 8"
FN-1402P Flare Nut Wrench - Inch 3/8" X 7/16"
FN-1404P Flare Nut Wrench - Inch 1/2" X 9/16"
FN-1406P Flare Nut Wrench - Inch 5/8" X 11/16"
FN-1410P Flare Nut Wrench - Inch 3/4" X 1"
FN-1012MP Flare Nut Wrench - Metric 10 mm X 12 mm
FN-1314MP Flare Nut Wrench - Metric 13 mm X 14 mm
FN-1517MP Flare Nut Wrench - Metric 15 mm X 17 mm
FN-1921MP Flare Nut Wrench - Metric 19 mm X 21 mm
BWS-1202P Box End Wrench Long - Inch 5/16" X 3/8"
BWS-1206P Box End Wrench Long - Inch 7/16" X 1/2"
BWS-1211P Box End Wrench Long - Inch 9/16" X 5/8"
BWS-1214P Box End Wrench Long - Inch 11/16" X 3/4"
BWS-1216P Box End Wrench Long - Inch 13/16" X 7/8"
BWS-1218P Box End Wrench Long - Inch 15/16" X 1"
3114 Ignition Open End Wrench 13/64"
3116 Ignition Open End Wrench 7/32"
3118 Ignition Open End Wrench 15/64"
3120 Ignition Open End Wrench 1/4"
3122 Ignition Open End Wrench 17/64"
3124 Ignition Open End Wrench 9/32"
3128 Ignition Open End Wrench 5/16"
3130 Ignition Open End Wrench 11/32"
3132 Ignition Open End Wrench 3/8"
3134 Ignition Open End Wrench 7/16"
CT-114 14 Pc. Chisel and Punch Set
CT-1509 Aligning Punch 11" Length, 1/4" Point
CT-1108 Long Cold Chisel 3/4" L 12"
CT-1110 Long Cold Chisel 7/8" L 12"
CT-1404 Hand Punch 3/8" L 5"
CT-1554 Long Taper Punch 1/2" L 8-1/2"
CT-1556 Long Taper Punch 1/2" L 9"
CT-1558 Long Taper Punch 5/8" L 11"
CT-1303 Center Punch 3/8" L5"
CT-1306 Center Punch 1/2" L6"
ZW-59 13 Pc. Long Hex Key Wrench Set
ZW-53 13 Pc. Hex Key Wrench Set .050- 3/8"
ZW-69 9 Pc. Metric Hex Key Wrench Set
PT-1251 5" Ignition Plier
PT-1052-1 6" Diagonal Cutting Plier
PT-1002-1 6" Heavy Duty Slip Joint
PT-1003-1 8" Heavy Duty Slip Joint
PT-1004-1 10" Heavy Duty Slip Joint
84-597 18 Piece Retaining Ring Plier Set
ST-803 Nut Driver Inch 1/4"
ST-806 Nut Driver Inch 5/16"
ST-809 Nut Driver Inch 11/32"
ST-812 Nut Driver Inch 3/8"
ST-815 Nut Driver Inch 7/16"
ST-818 Nut Driver Inch 1/2"
ST-905M Nut Driver Metric 5 mm
ST-955M Nut Driver Metric 5.5 mm
ST-907M Nut Driver Metric 7 mm
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
624 PIECE MASTER TOOL SETITEM NO. 97624 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 26
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
27Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
ST-908M Nut Driver Metric 8 mm
ST-909M Nut Driver Metric 9 mm
ST-910M Nut Driver Metric 10 mm
ST-1043S Electrician's Slotted Tip Screwdriver 3" Blade, 3/16" Tip
ST-1046S Electrician's Slotted Tip Screwdriver 6" Blade, 3/16" Tip
ST-1048S Electrician's Slotted Tip Screwdriver 8" Blade, 3/16" Tip
ST-1081S Phillips® Tip Screwdriver 3" Blade, No. 1 Pt.
ST-1082S Phillips® Tip Screwdriver 4" Blade, No. 2 Pt.
ST-1083S Phillips® Tip Screwdriver 6" Blade, No. 3 Pt.
ST-1084S Phillips® Tip Screwdriver 8" Blade, No. 4 Pt.
ST-1140S Stubby Phillips® Tip Screwdriver 1-1/2" Blade, No. 2 Pt.
ST-1145S Stubby Slotted Tip Screwdriver 1-1/4" Blade, 7/32" Tip
ST-1150S Pocket-Size Slotted Tip Screwdriver With Clip 2" Blade, 1/8" Tip
ST-1004S Round Shank Slotted Tip Screwdriver 4" Blade, 1/4" Tip
ST-1006S Round Shank Slotted Tip Screwdriver 6" Blade, 5/16" Tip
ST-1008S Round Shank Slotted Tip Screwdriver 8" Blade, 3/8" Tip
ST-1024S Square Shank Slotted Tip Screwdriver 4" Blade, 1/4" Tip
ST-1026S Square Shank Slotted Tip Screwdriver 6" Blade, 5/16" Tip
ST-1028S Square Shank Slotted Tip Screwdriver 8" Blade, 3/8" Tip
ST-610S Torx® Screwdriver T10
ST-615S Torx® Screwdriver T15
ST-620S Torx® Screwdriver T20
ST-625S Torx® Screwdriver T25
ST-630S Torx® Screwdriver T30
9000-A Adapter Socket
900-20 Insert Bit # 0 Pt. Phillips®
900-21 Insert Bit # 1 Pt. Phillips®
900-22 Insert Bit # 2 Pt. Phillips®
900-23 Insert Bit # 3 Pt. Phillips®
900-0 Insert Bit Slotted 7/64"
900-5 Insert Bit Slotted 7/32"
900-1 Insert Bit Slotted 1/8"
900-2 Insert Bit Slotted 9/64"
900-8 Insert Bit Slotted 5/16"
900-3 Insert Bit Slotted 5/32"
900-4 Insert Bit Slotted 3/16"
900-6 Insert Bit Slotted 1/4"
900-7 Insert Bit Slotted 9/32"
900-30 Insert Bit Square Head, #0
900-31 Insert Bit Square Head, #1
900-32 Insert Bit Square Head, #2
900-33 Insert Bit Square Head, #3
900-40 Insert Bit Reed Prince #0 (Pozi)
900-41 Insert Bit Reed Prince #1 (Pozi)
900-42 Insert Bit Reed Prince #2 (Pozi)
900-43 Insert Bit Reed Prince #3 (Pozi)
900-51 Insert Bit Phillips® ARC, #1
900-52 Insert Bit Phillips® ARC, #2
900-53 Insert Bit Phillips® ARC, #3
9000-TP10 Insert Bit Tamper Resistant T10
9000-TP15 Insert Bit Tamper Resistant T15
9000-TP20 Insert Bit Tamper Resistant T20
9000-TP25 Insert Bit Tamper Resistant T25
9000-TP27 Insert Bit Tamper Resistant T27
900-60 Hex Bit, 5/64"
900-61 Hex Bit, 1/8"
900-62 Hex Bit, 5/32
900-63 Hex Bit, 3/16"
900-64 Hex Bit, 1/4"
9000-T6 Torx® Bit T6
9000-T7 Torx® Bit T7
9000-T8 Torx® Bit T8
9000-T10 Torx® Bit T10
9000-T15 Torx® Bit T15
9000-T20 Torx® Bit T20
9000-T25 Torx® Bit T25
9000-T27 Torx® Bit T27
9000-T30 Torx® Bit T30
9000-T40 Torx® Bit T40
MT-1049 All Purpose Feeler Gauge
FT-1202 Hacksaw
FT-1124 10 Pc Hacksaw Blades
DT-55 5 Pc Screw Extractor Set
33-212 Tape Measure 12'
10-099 Knife
11-921 10 Heavy Duty Utility Blades
624 PIECE MASTER TOOL SETITEM NO. 97624 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 27
Visit us at...www.stanleyproto.com28
MA
ST
ER
SE
TS
584 PIECE MASTER TOOL SETITEM NO. 97584• Weight: 192 lbs.
370 Sockets & Accessories67 Wrenches24 Screwdrivers26 Punches & Chisels19 Pliers78 Miscellaneous Tools
Torx® is a registered trademark of Textron.
584 PIECE MASTER TOOL SETITEM NO. 97584
Contents Description Contents Description
GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mmGW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mmGW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-705M 12 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-755M 12 Pt. Standard Metric Socket 1/4" Drive 5.5 mmGW-706M 12 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-707M 12 Pt. Standard Metric Socket 1/4" Drive 7 mmGW-708M 12 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-709M 12 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-710M 12 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-711M 12 Pt. Standard Metric Socket 1/4" Drive 11 mm
master.qxd 6/24/05 1:30 PM Page 28
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
29Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
GW-712M 12 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-713M 12 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1507 6 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-1406 12 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1407 12 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1408 12 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1409 12 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1410 12 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1411 12 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1412 12 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1414 12 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1416 12 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-504M 6 Pt. Deep Metric Socket 1/4" Drive 4 mmGW-505M 6 Pt. Deep Metric Socket 1/4" Drive 5 mmGW-506M 6 Pt. Deep Metric Socket 1/4" Drive 6 mmGW-507M 6 Pt. Deep Metric Socket 1/4" Drive 7 mmGW-508M 6 Pt. Deep Metric Socket 1/4" Drive 8 mmGW-509M 6 Pt. Deep Metric Socket 1/4" Drive 9 mmGW-510M 6 Pt. Deep Metric Socket 1/4" Drive 10 mmGW-511M 6 Pt. Deep Metric Socket 1/4" Drive 11 mmGW-512M 6 Pt. Deep Metric Socket 1/4" Drive 12 mmGW-513M 6 Pt. Deep Metric Socket 1/4" Drive 13 mmGW-1605M 12 Pt. Deep Metric Socket 1/4" Drive 5 mmGW-1606M 12 Pt. Deep Metric Socket 1/4" Drive 6 mmGW-1607M 12 Pt. Deep Metric Socket 1/4" Drive 7 mmGW-1608M 12 Pt. Deep Metric Socket 1/4" Drive 8 mmGW-1609M 12 Pt. Deep Metric Socket 1/4" Drive 9 mmGW-1610M 12 Pt. Deep Metric Socket 1/4" Drive 10 mmGW-1611M 12 Pt. Deep Metric Socket 1/4" Drive 11 mmGW-1612M 12 Pt. Deep Metric Socket 1/4" Drive 12 mm GW-1613M 12 Pt. Deep Metric Socket 1/4" Drive 13 mmGW-1208 8 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1210 8 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1212 8 Pt. Standard Inch Socket 1/4" Drive 3/8"TS-1210 1/4" Torx® Socket Internal T10TS-1215 1/4" Torx® Socket Internal T15TS-1220 1/4" Torx® Socket Internal T20TS-1225 1/4" Torx® Socket Internal T25TS-1227 1/4" Torx® Socket Internal T27TS-1230 1/4" Torx® Socket Internal T30GW-9945B 1/4" Drive Round Head Reversible Ratchet34960 1/4" Drive 1/4" X 3/8" AdapterGW-9898 1/4" Drive Extension 3" GW-9899 1/4" Drive Extension 6" GW-9749B 1/4" Drive Flex Handle RatchetGW-9550 1/4" Drive Spinner30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"
30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"30630 6 Pt. Standard Inch Socket 3/8" Drive 15/16"30632 6 Pt. Standard Inch Socket 3/8" Drive 1"31108 8 Pt. Standard Inch Socket 3/8" Drive 1/4"31110 8 Pt. Standard Inch Socket 3/8" Drive 5/16"31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"31114 8 Pt. Standard Inch Socket 3/8" Drive 7/16"31116 8 Pt. Standard Inch Socket 3/8" Drive 1/2"30010A 12 Pt. Standard Inch Socket 3/8" Drive 5/16"30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm32008M 6 Pt. Standard Metric Socket 3/8" Drive 8 mm32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm32020M 6 Pt. Standard Metric Socket 3/8" Drive 20 mm32021M 6 Pt. Standard Metric Socket 3/8" Drive 21 mm34008M 12 Pt. Standard Metric Socket 3/8" Drive 8 mm34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm34020M 12 Pt. Standard Metric Socket 3/8" Drive 20 mm34021M 12 Pt. Standard Metric Socket 3/8" Drive 21 mm34022M 12 Pt. Standard Metric Socket 3/8" Drive 22 mmHW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"HW-1520 6 Pt. Deep Inch Socket 3/8" Drive 5/8"HW-1522 6 Pt. Deep Inch Socket 3/8" Drive 11/16"HW-1524 6 Pt. Deep Inch Socket 3/8" Drive 3/4"HW-1526 6 Pt. Deep Inch Socket 3/8" Drive 13/16"HW-1528 6 Pt. Deep Inch Socket 3/8" Drive 7/8"30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"
584 PIECE MASTER TOOL SETITEM NO. 97584
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 29
Visit us at...www.stanleyproto.com30
MA
ST
ER
SE
TS
30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"30428 12 Pt. Deep Inch Socket 3/8" Drive 7/8"30430 12 Pt. Deep Inch Socket 3/8" Drive 15/16"30432 12 Pt. Deep Inch Socket 3/8" Drive 1"U-1508 6 Pt. Standard Inch Impact Socket 3/8" Drive 1/4"U-1510 6 Pt. Standard Inch Impact Socket 3/8" Drive 5/16"U-1512 6 Pt. Standard Inch Impact Socket 3/8" Drive 3/8"U-1514 6 Pt. Standard Inch Impact Socket 3/8" Drive 7/16"U-1516 6 Pt. Standard Inch Impact Socket 3/8" Drive 1/2"U-1518 6 Pt. Standard Inch Impact Socket 3/8" Drive 9/16"U-1520 6 Pt. Standard Inch Impact Socket 3/8" Drive 5/8"U-1522 6 Pt. Standard Inch Impact Socket 3/8" Drive 11/16"U-1524 6 Pt. Standard Inch Impact Socket 3/8" Drive 3/4"U-1508M 6 Pt. Standard Metric Impact Socket 3/8" Drive 8 mmU-1509M 6 Pt. Standard Metric Impact Socket 3/8" Drive 9 mmU-1510M 6 Pt. Standard Metric Impact Socket 3/8" Drive 10 mmU-1512M 6 Pt. Standard Metric Impact Socket 3/8" Drive 12 mmU-1513M 6 Pt. Standard Metric Impact Socket 3/8" Drive 13 mmU-1514M 6 Pt. Standard Metric Impact Socket 3/8" Drive 14 mmU-1515M 6 Pt. Standard Metric Impact Socket 3/8" Drive 15 mmU-1517M 6 Pt. Standard Metric Impact Socket 3/8" Drive 17 mmU-1518M 6 Pt. Standard Metric Impact Socket 3/8" Drive 18 mmU-1519M 6 Pt. Standard Metric Impact Socket 3/8" Drive 19 mmU-1608M 6 Pt. Deep Metric Impact Socket 3/8" Drive 8 mmU-1609M 6 Pt. Deep Metric Impact Socket 3/8" Drive 9 mmU-1610M 6 Pt. Deep Metric Impact Socket 3/8" Drive 10 mmU-1611M 6 Pt. Deep Metric Impact Socket 3/8" Drive 11 mmU-1612M 6 Pt. Deep Metric Impact Socket 3/8" Drive 12 mmU-1613M 6 Pt. Deep Metric Impact Socket 3/8" Drive 13 mmU-1614M 6 Pt. Deep Metric Impact Socket 3/8" Drive 14 mmU-1615M 6 Pt. Deep Metric Impact Socket 3/8" Drive 15 mmU-1616M 6 Pt. Deep Metric Impact Socket 3/8" Drive 16 mmU-1617M 6 Pt. Deep Metric Impact Socket 3/8" Drive 17 mmU-1618M 6 Pt. Deep Metric Impact Socket 3/8" Drive 18 mmU-1619M 6 Pt. Deep Metric Impact Socket 3/8" Drive 19 mmHW-9442 3/8" Drive Hex Bit Socket Inch 1/8"HW-9443 3/8" Drive Hex Bit Socket Inch 9/64"HW-9444 3/8" Drive Hex Bit Socket Inch 5/32"HW-9449 3/8" Drive Hex Bit Socket Inch 3/16"HW-9448 3/8" Drive Hex Bit Socket Inch 7/32"HW-9447 3/8" Drive Hex Bit Socket Inch 1/4"HW-9446 3/8" Drive Hex Bit Socket Inch 5/16"HW-9445 3/8" Drive Hex Bit Socket Inch 3/8"HW-9404M 3/8" Drive Hex Bit Socket Metric 4 mmHW-9405M 3/8" Drive Hex Bit Socket Metric 5 mmHW-9406M 3/8" Drive Hex Bit Socket Metric 6 mmHW-9407M 3/8" Drive Hex Bit Socket Metric 7 mmHW-9408M 3/8" Drive Hex Bit Socket Metric 8 mmHW-9410M 3/8" Drive Hex Bit Socket Metric 10 mmHW-1520S 3/8" Drive Spark Plug Socket 5/8"HW-1526S 3/8" Drive Spark Plug Socket 13/16"30320S 3/8" Drive Spark Plug Socket 5/8" Universal30326 3/8" Drive Spark Plug Socket 13/16" Universal34945B 3/8" Drive Round Head Reversible Ratchet
34989 3/8" Drive Extension 1-3/4" 34983 3/8" Drive Extension 19" 34988 3/8" Drive Extension 3" 34987 3/8" Drive Extension 6" 34993 3/8" Drive Universal Joint34982 3/8" Drive Speeder Handle Ratchet 34986B 3/8" Drive Flex Handle Ratchet 34963 3/8" Drive 3/8" x 1/4" Adapter40620 6 Pt. Standard Inch Socket 1/2" Drive 5/8"40622 6 Pt. Standard Inch Socket 1/2" Drive 11/16"40624 6 Pt. Standard Inch Socket 1/2" Drive 3/4"40626 6 Pt. Standard Inch Socket 1/2" Drive 13/16"40628 6 Pt. Standard Inch Socket 1/2" Drive 7/8"40630 6 Pt. Standard Inch Socket 1/2" Drive 15/16"40632 6 Pt. Standard Inch Socket 1/2" Drive 1"40634 6 Pt. Standard Inch Socket 1/2" Drive 1-1/16"40636 6 Pt. Standard Inch Socket 1/2" Drive 1-1/8"40612 6 Pt. Standard Inch Socket 1/2" Drive 3/8"40614 6 Pt. Standard Inch Socket 1/2" Drive 7/16"40616 6 Pt. Standard Inch Socket 1/2" Drive 1/2"40618 6 Pt. Standard Inch Socket 1/2" Drive 9/16"40112 12 Pt. Standard Inch Socket 1/2" Drive 3/8"40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"40132 12 Pt. Standard Inch Socket 1/2" Drive 1"40134 12 Pt. Standard Inch Socket 1/2" Drive 1-1/16"40136 12 Pt. Standard Inch Socket 1/2" Drive 1-1/8"40138 12 Pt. Standard Inch Socket 1/2" Drive 1-3/16"40140 12 Pt. Standard Inch Socket 1/2" Drive 1-1/4"42010M 6 Pt. Standard Metric Socket 1/2" Drive 10 mm42011M 6 Pt. Standard Metric Socket 1/2" Drive 11 mm42012M 6 Pt. Standard Metric Socket 1/2" Drive 12 mm42013M 6 Pt. Standard Metric Socket 1/2" Drive 13 mm42014M 6 Pt. Standard Metric Socket 1/2" Drive 14 mm43015M 6 Pt. Standard Metric Socket 1/2" Drive 15 mm43017M 6 Pt. Standard Metric Socket 1/2" Drive 17 mm43019M 6 Pt. Standard Metric Socket 1/2" Drive 19 mm43021M 6 Pt. Standard Metric Socket 1/2" Drive 21 mm43022M 6 Pt. Standard Metric Socket 1/2" Drive 22 mm43023M 6 Pt. Standard Metric Socket 1/2" Drive 23 mm43024M 6 Pt. Standard Metric Socket 1/2" Drive 24 mm43027M 6 Pt. Standard Metric Socket 1/2" Drive 27 mm43010M 12 Pt. Standard Metric Socket 1/2" Drive 10 mm43011M 12 Pt. Standard Metric Socket 1/2" Drive 11 mm43012M 12 Pt. Standard Metric Socket 1/2" Drive 12 mm43013M 12 Pt. Standard Metric Socket 1/2" Drive 13 mm43014M 12 Pt. Standard Metric Socket 1/2" Drive 14 mm42015M 12 Pt. Standard Metric Socket 1/2" Drive 15 mm42016M 12 Pt. Standard Metric Socket 1/2" Drive 16 mm42017M 12 Pt. Standard Metric Socket 1/2" Drive 17 mm42018M 12 Pt. Standard Metric Socket 1/2" Drive 18 mm42019M 12 Pt. Standard Metric Socket 1/2" Drive 19 mm42020M 12 Pt. Standard Metric Socket 1/2" Drive 20 mm
584 PIECE MASTER TOOL SETITEM NO. 97584 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 30
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
31Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
42021M 12 Pt. Standard Metric Socket 1/2" Drive 21 mm42022M 12 Pt. Standard Metric Socket 1/2" Drive 22 mm42023M 12 Pt. Standard Metric Socket 1/2" Drive 23 mm42024M 12 Pt. Standard Metric Socket 1/2" Drive 24 mm42025M 12 Pt. Standard Metric Socket 1/2" Drive 25 mm42026M 12 Pt. Standard Metric Socket 1/2" Drive 26 mm42027M 12 Pt. Standard Metric Socket 1/2" Drive 27 mm42028M 12 Pt. Standard Metric Socket 1/2" Drive 28 mm42030M 12 Pt. Standard Metric Socket 1/2" Drive 30 mm42032M 12 Pt. Standard Metric Socket 1/2" Drive 32 mm42036M 12 Pt. Standard Metric Socket 1/2" Drive 36 mmUW-1614 6 Pt. Standard Inch Impact Socket 1/2" Drive 7/16"UW-1616 6 Pt. Standard Inch Impact Socket 1/2" Drive 1/2"UW-1618 6 Pt. Standard Inch Impact Socket 1/2" Drive 9/16"UW-1620 6 Pt. Standard Inch Impact Socket 1/2" Drive 5/8"UW-1622 6 Pt. Standard Inch Impact Socket 1/2" Drive 11/16"UW-1624 6 Pt. Standard Inch Impact Socket 1/2" Drive 3/4"UW-1626 6 Pt. Standard Inch Impact Socket 1/2" Drive 13/16"UW-1628 6 Pt. Standard Inch Impact Socket 1/2" Drive 7/8"UW-1630 6 Pt. Standard Inch Impact Socket 1/2" Drive 15/16"UW-1632 6 Pt. Standard Inch Impact Socket 1/2" Drive 1"UW-1634 6 Pt. Standard Inch Impact Socket 1/2" Drive 1-1/16"UW-614M 6 Pt. Standard Metric Impact Socket 1/2" Drive 14 mmUW-615M 6 Pt. Standard Metric Impact Socket 1/2" Drive 15 mmUW-616M 6 Pt. Standard Metric Impact Socket 1/2" Drive 16 mmUW-617M 6 Pt. Standard Metric Impact Socket 1/2" Drive 17 mmUW-618M 6 Pt. Standard Metric Impact Socket 1/2" Drive 18 mmUW-619M 6 Pt. Standard Metric Impact Socket 1/2" Drive 19 mmUW-620M 6 Pt. Standard Metric Impact Socket 1/2" Drive 20 mmUW-621M 6 Pt. Standard Metric Impact Socket 1/2" Drive 21 mmUW-622M 6 Pt. Standard Metric Impact Socket 1/2" Drive 22 mmUW-624M 6 Pt. Standard Metric Impact Socket 1/2" Drive 24 mmUW-627M 6 Pt. Standard Metric Impact Socket 1/2" Drive 27 mmUW-514M 6 Pt. Deep Metric Impact Socket 1/2" Drive 14 mmUW-515M 6 Pt. Deep Metric Impact Socket 1/2" Drive 15 mmUW-516M 6 Pt. Deep Metric Impact Socket 1/2" Drive 16 mmUW-517M 6 Pt. Deep Metric Impact Socket 1/2" Drive 17 mmUW-518M 6 Pt. Deep Metric Impact Socket 1/2" Drive 18 mmUW-519M 6 Pt. Deep Metric Impact Socket 1/2" Drive 19 mmUW-520M 6 Pt. Deep Metric Impact Socket 1/2" Drive 20 mmUW-521M 6 Pt. Deep Metric Impact Socket 1/2" Drive 21 mmUW-522M 6 Pt. Deep Metric Impact Socket 1/2" Drive 22 mmUW-524M 6 Pt. Deep Metric Impact Socket 1/2" Drive 24 mmUW-527M 6 Pt. Deep Metric Impact Socket 1/2" Drive 27 mm44010M 12 Pt. Deep Metric Socket 1/2" Drive 10 mm44011M 12 Pt. Deep Metric Socket 1/2" Drive 11 mm44012M 12 Pt. Deep Metric Socket 1/2" Drive 12 mm44013M 12 Pt. Deep Metric Socket 1/2" Drive 13 mm44014M 12 Pt. Deep Metric Socket 1/2" Drive 14 mm44015M 12 Pt. Deep Metric Socket 1/2" Drive 15 mm44016M 12 Pt. Deep Metric Socket 1/2" Drive 16 mm44017M 12 Pt. Deep Metric Socket 1/2" Drive 17 mm44018M 12 Pt. Deep Metric Socket 1/2" Drive 18 mm44019M 12 Pt. Deep Metric Socket 1/2" Drive 19 mm44020M 12 Pt. Deep Metric Socket 1/2" Drive 20 mm44021M 12 Pt. Deep Metric Socket 1/2" Drive 21 mm44022M 12 Pt. Deep Metric Socket 1/2" Drive 22 mm44023M 12 Pt. Deep Metric Socket 1/2" Drive 23 mm44024M 12 Pt. Deep Metric Socket 1/2" Drive 24 mm44025M 12 Pt. Deep Metric Socket 1/2" Drive 25 mm
44026M 12 Pt. Deep Metric Socket 1/2" Drive 26 mm44027M 12 Pt. Deep Metric Socket 1/2" Drive 27 mm40416 6 Pt. Deep Inch Socket 1/2" Drive 1/2"40418 6 Pt. Deep Inch Socket 1/2" Drive 9/16"40420 6 Pt. Deep Inch Socket 1/2" Drive 5/8"40422 6 Pt. Deep Inch Socket 1/2" Drive 11/16"40424 6 Pt. Deep Inch Socket 1/2" Drive 3/4"40426 6 Pt. Deep Inch Socket 1/2" Drive 13/16"40428 6 Pt. Deep Inch Socket 1/2" Drive 7/8"40430 6 Pt. Deep Inch Socket 1/2" Drive 15/16"40432 6 Pt. Deep Inch Socket 1/2" Drive 1"40434 6 Pt. Deep Inch Socket 1/2" Drive 1-1/16"40436 6 Pt. Deep Inch Socket 1/2" Drive 1-1/8"40316 12 Pt. Deep Inch Socket 1/2" Drive 1/2"40318 12 Pt. Deep Inch Socket 1/2" Drive 9/16"40320 12 Pt. Deep Inch Socket 1/2" Drive 5/8"40322 12 Pt. Deep Inch Socket 1/2" Drive 11/16"40324 12 Pt. Deep Inch Socket 1/2" Drive 3/4"40326 12 Pt. Deep Inch Socket 1/2" Drive 13/16"40328 12 Pt. Deep Inch Socket 1/2" Drive 7/8"40330 12 Pt. Deep Inch Socket 1/2" Drive 15/16"40332 12 Pt. Deep Inch Socket 1/2" Drive 1"40334 12 Pt. Deep Inch Socket 1/2" Drive 1-1/16"40336 12 Pt. Deep Inch Socket 1/2" Drive 1-1/8"40320S 1/2" Drive Spark Plug Socket 5/8"40326S 1/2" Drive Spark Plug Socket 13/16"49964 1/2" Drive Extension 2" 49945B 1/2" Drive Round Head Reversible RatchetUW-30 1/2" Drive Impact Extension 2-5/8" 49966 1/2" Drive Extension 5" 49990 1/2" Drive Extension 10" 49978 1/2" Drive Universal Joint49992 1/2" Drive Speeder Handle49988B 1/2" Drive Flex Handle Ratchet34965 1/2" Drive 1/2" x 3/8" Adapter69992 1/2" Drive 1/2" x 3/4" AdapterBW-1110M Satin Finish - Combination Wrench Metric 10 mmBW-1111M Satin Finish - Combination Wrench Metric 11 mmBW-1112M Satin Finish - Combination Wrench Metric 12 mmBW-1113M Satin Finish - Combination Wrench Metric 13 mmBW-1114M Satin Finish - Combination Wrench Metric 14 mmBW-1115M Satin Finish - Combination Wrench Metric 15 mmBW-1116M Satin Finish - Combination Wrench Metric 16 mmBW-1117M Satin Finish - Combination Wrench Metric 17 mmBW-1118M Satin Finish - Combination Wrench Metric 18 mmBW-1119M Satin Finish - Combination Wrench Metric 19 mmBW-1120M Satin Finish - Combination Wrench Metric 20 mmBW-1121M Satin Finish - Combination Wrench Metric 21 mmBW-1122M Satin Finish - Combination Wrench Metric 22 mmBW-1124M Satin Finish - Combination Wrench Metric 24 mmBW-1125M Satin Finish - Combination Wrench Metric 25 mmBW-1127M Satin Finish - Combination Wrench Metric 27 mmBW-1128M Satin Finish - Combination Wrench Metric 28 mmBW-1132M Satin Finish - Combination Wrench Metric 32 mmBW-1160 Satin Finish - Combination Wrench 3/8"BW-1161 Satin Finish - Combination Wrench 7/16"BW-1162 Satin Finish - Combination Wrench 1/2"BW-1163 Satin Finish - Combination Wrench 9/16"BW-1164 Satin Finish - Combination Wrench 5/8"BW-1165 Satin Finish - Combination Wrench 11/16"
584 PIECE MASTER TOOL SETITEM NO. 97584 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 31
Visit us at...www.stanleyproto.com32
MA
ST
ER
SE
TS
584 PIECE MASTER TOOL SETITEM NO. 97584 (CONTINUED)
Contents Description Contents Description
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
BW-1166 Satin Finish - Combination Wrench 3/4"BW-1167A Satin Finish - Combination Wrench 13/16"BW-1167 Satin Finish - Combination Wrench 7/8"BW-1168 Satin Finish - Combination Wrench 15/16" BW-1170 Satin Finish - Combination Wrench 1"BW-1171 Satin Finish - Combination Wrench 1-1/16"BW-1172 Satin Finish - Combination Wrench 1-1/8"BW-1173 Satin Finish - Combination Wrench 1-1/4"4020P Full Polish - Open End Wrench Inch 1/4" X 5/16"4723P Full Polish - Open End Wrench Inch 3/8" X 7/16"4724P Full Polish - Open End Wrench Inch 7/16" X 1/2"4725P Full Polish - Open End Wrench Inch 1/2" X 9/16"4727P Full Polish - Open End Wrench Inch 5/8" X 11/16"4728P Full Polish - Open End Wrench Inch 11/16" X 3/4"4732P Full Polish - Open End Wrench Inch 13/16" X 7/8"4033P Full Polish - Open End Wrench Inch 15/16" X 1"AW-1004-1 Adjustable Wrench 4"AW-1006-1 Adjustable Wrench 6"AW-1008-1 Adjustable Wrench 8"AW-1010-1 Adjustable Wrench 10"AW-1012-1 Adjustable Wrench 12"FN-1402P Flare Nut Wrench - Inch 3/8" X 7/16"FN-1404P Flare Nut Wrench - Inch 1/2" X 9/16"FN-1406P Flare Nut Wrench - Inch 5/8" X 11/16"FN-1410P Flare Nut Wrench - Inch 3/4" X 1"FN-911MP Flare Nut Wrench - Metric 9 mm X 11 mmFN-1012MP Flare Nut Wrench - Metric 10 mm X 12 mmFN-1314MP Flare Nut Wrench - Metric 13 mm X 14 mmFN-1517MP Flare Nut Wrench - Metric 15 mm X 17 mmFN-1921MP Flare Nut Wrench - Metric 19 mm X 21 mmBWS-1202P Box End Wrench Long - Inch 5/16" X 3/8"BWS-1206P Box End Wrench Long - Inch 7/16" X 1/2"BWS-1211P Box End Wrench Long - Inch 9/16" X 5/8"BWS-1214P Box End Wrench Long - Inch 11/16" X 3/4"BWS-1216P Box End Wrench Long - Inch 13/16" X 7/8"BWS-1218P Box End Wrench Long - Inch 15/16" X 1"3114 Ignition Open End Wrench 13/64"3116 Ignition Open End Wrench 7/32"
3118 Ignition Open End Wrench 15/64"3120 Ignition Open End Wrench 1/4"3122 Ignition Open End Wrench 17/64"3124 Ignition Open End Wrench 9/32"3128 Ignition Open End Wrench 5/16"CT-114 14 Pc. Chisel and Punch SetCT-1509 Aligning Punch 11" Length, 1/4" PointCT-1108 Long Cold Chisel 3/4" L 12"CT-1110 Long Cold Chisel 7/8" L 12"CT-1404 Hand Punch 3/8" L 5"CT-1554 Long Taper Punch 1/2" L 8-1/2"CT-1556 Long Taper Punch 1/2" L 9"CT-1558 Long Taper Punch 5/8" L 11"CT-1303 Center Punch 3/8" L5"CT-1306 Center Punch 1/2" L6"CT-1617 Pry Bar 1/2" L 15"CT-1606 Pinch Bar 1/2" L 14"CT-1254 Diamond Point Chisel 5" Length, 3/16" EdgeHW-9451 Phillips® Screwdriver Bit Socket No. 2HW-9450 Phillips® Screwdriver Bit Socket No. 1HW-9452 Phillips® Screwdriver Bit Socket No. 3HW-9506 3/8" Drive Slotted Screwdriver Bit Socket 5/16" Tip WidthHW-9505 3/8" Drive Screwdriver Bit Socket 1/4" Tip WidthHW-9504 3/8" Drive Screwdriver Bit Socket 3/16" Tip WidthZW-59 13 Pc Long Hex Key Wrench Set ZW-53 13 Pc Hex Key Wrench Set .050- 3/8"ZW-69 9 Pc Metric Hex Key Wrench SetPT-1251 5" Ignition PlierPT-1052-1 6" Diagonal Cutting Plier PT-1057-1 7" Heavy-Duty Diagonal Cutting PlierPT-1108-1 8" Linesman Plier PT-1128-1 6-1/2" Long Nose Sidecutting PlierPT-1149-1 6" Curved Needle Nose Plier PT-1002-1 6" Heavy Duty Slip JointPT-1050 8-1/2" Wire Stripper and Crimper PlierPT-3000 4 Pc Mini Long Reach Plier SetPT-1250-1 10 Rib Lock PlierPT-1259 7" Battery Plier
master.qxd 6/24/05 1:30 PM Page 32
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
33Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
PT-1263 8" Parrot Nose PlierPT-1266 7-3/4" Lock Ring PlierPT-1002-1 6" Heavy Duty Slip JointPT-1003-1 8" Heavy Duty Slip JointPT-1004-1 10" Heavy Duty Slip JointST-1043S Electrician's Slotted Tip Screwdriver 3" Blade, 3/16" TipST-1046S Electrician's Slotted Tip Screwdriver 6" Blade, 3/16" TipST-1048S Electrician's Slotted Tip Screwdriver 8" Blade, 3/16" TipST-1081S Phillips® Tip Screwdriver 3" Blade, No. 1 Pt.ST-1082S Phillips® Tip Screwdriver 4" Blade, No. 2 Pt.ST-1083S Phillips® Tip Screwdriver 6" Blade, No. 3 Pt.ST-1084S Phillips® Tip Screwdriver 8" Blade, No. 4 Pt.ST-1140S Stubby Phillips® Tip Screwdriver 1- 1/2" Blade, No. 2 Pt.ST-1145S Stubby Slotted Tip Screwdriver 1-1/4" Blade, 7/32" TipST-1150S Pocket-Size Slotted Tip Screwdriver With Clip 2" Blade, 1/8" TipST-1004S Round Shank Slotted Tip Screwdriver 4" Blade, 1/4" TipST-1006S Round Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1008S Round Shank Slotted Tip Screwdriver 8" Blade, 3/8" TipST-1024S Square Shank Slotted Tip Screwdriver 4" Blade, 1/4" TipST-1026S Square Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1028S Square Shank Slotted Tip Screwdriver 8" Blade, 3/8" TipST-1032S Square Shank Slotted Tip Screwdriver 12" Blade, 3/8" TipST-608S Torx® Screwdriver T8ST-610S Torx® Screwdriver T10ST-615S Torx® Screwdriver T15ST-620S Torx® Screwdriver T20ST-625S Torx® Screwdriver T25ST-627S Torx® Screwdriver T27ST-630S Torx® Screwdriver T30ST-803 Nut Driver Inch 1/4"ST-806 Nut Driver Inch 5/16"ST-809 Nut Driver Inch 11/32"ST-812 Nut Driver Inch 3/8"ST-815 Nut Driver Inch 7/16"
ST-818 Nut Driver Inch 1/2"ST-905M Nut Driver Metric 5 mmST-955M Nut Driver Metric 5.5 mmST-907M Nut Driver Metric 7 mmST-908M Nut Driver Metric 8 mmST-909M Nut Driver Metric 9 mmST-910M Nut Driver Metric 10 mm9000-A Adapter Socket900-20 Insert Bit # 0 Pt. Phillips®
900-21 Insert Bit # 1 Pt. Phillips®
900-22 Insert Bit # 2 Pt. Phillips®
900-23 Insert Bit # 3 Pt. Phillips®
900-0 Insert Bit Slotted 7/64"900-5 Insert Bit Slotted 7/32"900-1 Insert Bit Slotted 1/8"900-2 Insert Bit Slotted 9/64"900-8 Insert Bit Slotted 5/16"900-3 Insert Bit Slotted 5/32"900-4 Insert Bit Slotted 3/16"900-6 Insert Bit Slotted 1/4"9000-T7 Torx® Bit T79000-T8 Torx® Bit T89000-T10 Torx® Bit T109000-T15 Torx® Bit T159000-T20 Torx® Bit T209000-T25 Torx® Bit T259000-T27 Torx® Bit T279000-T30 Torx® Bit T30900-60 Hex Bit, 5/64"900-61 Hex Bit, 1/8"900-62 Hex Bit, 5/32900-63 Hex Bit, 3/16"900-64 Hex Bit, 1/4"DT-55 5 Pc Screw Extractor Set
584 PIECE MASTER TOOL SETITEM NO. 97584 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 33
Visit us at...www.stanleyproto.com34
MA
ST
ER
SE
TS
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
300 PIECE MASTER TOOL SETITEM NO. 97300• Weight: 50 lbs.
241 Sockets & Accessories12 Wrenches7 Screwdrivers40 Miscellaneous Tools
master.qxd 6/24/05 1:30 PM Page 34
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
35Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-1705 12 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1706 12 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1707 12 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1708 12 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1709 12 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1710 12 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1711 12 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1712 12 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1714 12 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1716 12 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mmGW-645M 6 Pt. Standard Metric Socket 1/4" Drive 4.5 mmGW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mmGW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mmGW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-705M 12 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-706M 12 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-707M 12 Pt. Standard Metric Socket 1/4" Drive 7 mmGW-708M 12 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-709M 12 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-710M 12 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-711M 12 Pt. Standard Metric Socket 1/4" Drive 11 mmGW-712M 12 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-713M 12 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1507 6 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-505M 6 Pt. Deep Metric Socket 1/4" Drive 5 mmGW-506M 6 Pt. Deep Metric Socket 1/4" Drive 6 mmGW-507M 6 Pt. Deep Metric Socket 1/4" Drive 7 mmGW-508M 6 Pt. Deep Metric Socket 1/4" Drive 8 mmGW-509M 6 Pt. Deep Metric Socket 1/4" Drive 9 mmGW-510M 6 Pt. Deep Metric Socket 1/4" Drive 10 mmGW-511M 6 Pt. Deep Metric Socket 1/4" Drive 11 mmGW-512M 6 Pt. Deep Metric Socket 1/4" Drive 12 mmGW-513M 6 Pt. Deep Metric Socket 1/4" Drive 13 mmGW-9550 1/4" Drive Accessory Spinner34960 1/4" Drive Accessory 1/4" X 3/8" Adapter
GW-9898 1/4" Drive Extension 3" GW-9899 1/4" Drive Extension 6" GW-9945B 1/4" Drive Round Head Reversible Ratchet31108 8 Pt. Standard Inch Socket 3/8" Drive 1/4"31110 8 Pt. Standard Inch Socket 3/8" Drive 5/16"31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"31114 8 Pt. Standard Inch Socket 3/8" Drive 7/16"31116 8 Pt. Standard Inch Socket 3/8" Drive 1/2"30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"30630 6 Pt. Standard Inch Socket 3/8" Drive 15/16 "30632 6 Pt. Standard Inch Socket 3/8" Drive 1"30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"300301 12 Pt. Standard Inch Socket 3/8" Drive 15/16"300321 12 Pt. Standard Inch Socket 3/8" Drive 1"32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm32008M 6 Pt. Standard Metric Socket 3/8" Drive 8 mm32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm32020M 6 Pt. Standard Metric Socket 3/8" Drive 20 mm34007M 12 Pt. Standard Metric Socket 3/8" Drive 7 mm34008M 12 Pt. Standard Metric Socket 3/8" Drive 8 mm34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm34020M 12 Pt. Standard Metric Socket 3/8" Drive 20 mmHW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"
300 PIECE MASTER TOOL SETITEM NO. 97300
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 35
Visit us at...www.stanleyproto.com36
MA
ST
ER
SE
TS
Phillips® is a registered trademark of Phillips Screw Co.
HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"HW-1520 6 Pt. Deep Inch Socket 3/8" Drive 5/8"HW-1522 6 Pt. Deep Inch Socket 3/8" Drive 11/16"HW-1524 6 Pt. Deep Inch Socket 3/8" Drive 3/4"HW-1526 6 Pt. Deep Inch Socket 3/8" Drive 13/16"HW-1528 6 Pt. Deep Inch Socket 3/8" Drive 7/8"30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"30428 12 Pt. Deep Inch Socket 3/8" Drive 7/8"30430 12 Pt. Deep Inch Socket 3/8" Drive 15/16"30432 12 Pt. Deep Inch Socket 3/8" Drive 1"HW-1510M 6 Pt. Deep Metric Socket 3/8" Drive 10 mmHW-1511M 6 Pt. Deep Metric Socket 3/8" Drive 11 mmHW-1512M 6 Pt. Deep Metric Socket 3/8" Drive 12 mmHW-1513M 6 Pt. Deep Metric Socket 3/8" Drive 13 mmHW-1514M 6 Pt. Deep Metric Socket 3/8" Drive 14 mmHW-1515M 6 Pt. Deep Metric Socket 3/8" Drive 15 mmHW-1517M 6 Pt. Deep Metric Socket 3/8" Drive 17 mmHW-1519M 6 Pt. Deep Metric Socket 3/8" Drive 19 mmHW-1520S 3/8" Drive Spark Plug Socket 5/8"HW-1526S 3/8" Drive Spark Plug Socket 13/16"34988 3/8" Drive Extension 3" 34987 3/8" Drive Extension 6" 34993 3/8" Drive Universal Joint34963 3/8" Drive 3/8" x 1/4" Adapter34989 3/8" Drive Extension 1-3/4" 34984 1/2" Drive Extension 11" 34945B 3/8" Drive Round Head Reversible Ratchet40612 6 Pt. Standard Inch Socket 1/2" Drive 3/8"40614 6 Pt. Standard Inch Socket 1/2" Drive 7/16"40616 6 Pt. Standard Inch Socket 1/2" Drive 1/2"40618 6 Pt. Standard Inch Socket 1/2" Drive 9/16"40620 6 Pt. Standard Inch Socket 1/2" Drive 5/8"40622 6 Pt. Standard Inch Socket 1/2" Drive 11/16"40624 6 Pt. Standard Inch Socket 1/2" Drive 3/4"40628 6 Pt. Standard Inch Socket 1/2" Drive 7/8"40630 6 Pt. Standard Inch Socket 1/2" Drive 15/16"40632 6 Pt. Standard Inch Socket 1/2" Drive 1"40112 12 Pt. Standard Inch Socket 1/2" Drive 3/8"40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"40132 12 Pt. Standard Inch Socket 1/2" Drive 1"42010M 6 Pt. Standard Metric Socket 1/2" Drive 10 mm42011M 6 Pt. Standard Metric Socket 1/2" Drive 11 mm42012M 6 Pt. Standard Metric Socket 1/2" Drive 12 mm42013M 6 Pt. Standard Metric Socket 1/2" Drive 13 mm42014M 6 Pt. Standard Metric Socket 1/2" Drive 14 mm
43015M 6 Pt. Standard Metric Socket 1/2" Drive 15 mm43017M 6 Pt. Standard Metric Socket 1/2" Drive 17 mm43019M 6 Pt. Standard Metric Socket 1/2" Drive 19 mm43021M 6 Pt. Standard Metric Socket 1/2" Drive 21 mm43022M 6 Pt. Standard Metric Socket 1/2" Drive 22 mm43023M 6 Pt. Standard Metric Socket 1/2" Drive 23 mm43024M 6 Pt. Standard Metric Socket 1/2" Drive 24 mm43010M 12 Pt. Standard Metric Socket 1/2" Drive 10 mm43011M 12 Pt. Standard Metric Socket 1/2" Drive 11 mm43012M 12 Pt. Standard Metric Socket 1/2" Drive 12 mm43013M 12 Pt. Standard Metric Socket 1/2" Drive 13 mm43014M 12 Pt. Standard Metric Socket 1/2" Drive 14 mm42015M 12 Pt. Standard Metric Socket 1/2" Drive 15 mm42017M 12 Pt. Standard Metric Socket 1/2" Drive 17 mm42019M 12 Pt. Standard Metric Socket 1/2" Drive 19 mm42021M 12 Pt. Standard Metric Socket 1/2" Drive 21 mm42022M 12 Pt. Standard Metric Socket 1/2" Drive 22 mm42023M 12 Pt. Standard Metric Socket 1/2" Drive 23 mm42024M 12 Pt. Standard Metric Socket 1/2" Drive 24 mm40316 12 Pt. Deep Inch Socket 1/2" Drive 1/2"40318 12 Pt. Deep Inch Socket 1/2" Drive 9/16"40320 12 Pt. Deep Inch Socket 1/2" Drive 5/8"40322 12 Pt. Deep Inch Socket 1/2" Drive 11/16"40324 12 Pt. Deep Inch Socket 1/2" Drive 3/4"40326 12 Pt. Deep Inch Socket 1/2" Drive 13/16"40328 12 Pt. Deep Inch Socket 1/2" Drive 7/8"40330 12 Pt. Deep Inch Socket 1/2" Drive 15/16"40332 12 Pt. Deep Inch Socket 1/2" Drive 1"40334 12 Pt. Deep Inch Socket 1/2" Drive 1-1/16"40336 12 Pt. Deep Inch Socket 1/2" Drive 1-1/8"44012M 12 Pt. Deep Metric Socket 1/2" Drive 12 mm44013M 12 Pt. Deep Metric Socket 1/2" Drive 13 mm44014M 12 Pt. Deep Metric Socket 1/2" Drive 14 mm44015M 12 Pt. Deep Metric Socket 1/2" Drive 15 mm44016M 12 Pt. Deep Metric Socket 1/2" Drive 16 mm44017M 12 Pt. Deep Metric Socket 1/2" Drive 17 mm44018M 12 Pt. Deep Metric Socket 1/2" Drive 18 mm44019M 12 Pt. Deep Metric Socket 1/2" Drive 19 mm44020M 12 Pt. Deep Metric Socket 1/2" Drive 20 mm44021M 12 Pt. Deep Metric Socket 1/2" Drive 21 mm44022M 12 Pt. Deep Metric Socket 1/2" Drive 22 mm40320S 1/2" Drive Spark Plug Socket 5/8"40326S 1/2" Drive Spark Plug Socket 13/16"49964 1/2" Drive Extension 2" 49978 1/2" Drive Universal Joint49966 1/2" Drive Extension 5" 49990 1/2" Drive Extension 10" 34965 1/2" Drive 1/2" x 3/8" Adapter49945B 1/2" Drive Round Head Reversible RatchetBW-1160 Satin Finish - Combination Wrench 3/8"BW-1161 Satin Finish - Combination Wrench 7/16"BW-1162 Satin Finish - Combination Wrench 1/2"BW-1163 Satin Finish - Combination Wrench 9/16"BW-1164 Satin Finish - Combination Wrench 5/8"BW-1166 Satin Finish - Combination Wrench 3/4"BW-1110M Satin Finish - Combination Wrench Metric 10 mmBW-1111M Satin Finish - Combination Wrench Metric 11 mmBW-1112M Satin Finish - Combination Wrench Metric 12 mmBW-1113M Satin Finish - Combination Wrench Metric 13 mmBW-1114M Satin Finish - Combination Wrench Metric 14 mm
300 PIECE MASTER TOOL SETITEM NO. 97300 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 36
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
37Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
BW-1115M Satin Finish - Combination Wrench Metric 15 mmHW-9404M 3/8" Drive Hex Bit Socket Metric 4 mmHW-9405M 3/8" Drive Hex Bit Socket Metric 5 mmHW-9406M 3/8" Drive Hex Bit Socket Metric 6 mmHW-9407M 3/8" Drive Hex Bit Socket Metric 7 mmHW-9408M 3/8" Drive Hex Bit Socket Metric 8 mmHW-9410M 3/8" Drive Hex Bit Socket Metric 10 mmHW-9442 3/8" Drive Hex Bit Socket Inch 1/8"HW-9444 3/8" Drive Hex Bit Socket Inch 5/32"HW-9448 3/8" Drive Hex Bit Socket Inch 7/32"HW-9447 3/8" Drive Hex Bit Socket Inch 1/4"HW-9446 3/8" Drive Hex Bit Socket Inch 5/16"HW-9445 3/8" Drive Hex Bit Socket Inch 3/8"ST-803 Nut Driver Inch 1/4"
ST-806 Nut Driver Inch 5/16"ST-809 Nut Driver Inch 11/32"ST-812 Nut Driver Inch 3/8"ST-815 Nut Driver Inch 7/16"ST-1043S Electrician's Slotted Tip Screwdriver 3" Blade, 3/16" TipST-1046S Electrician's Slotted Tip Screwdriver 6" Blade, 3/16" TipST-1048S Electrician's Slotted Tip Screwdriver 8" Blade, 3/16" TipST-1081S Phillips® Tip Screwdriver 3" Blade, No. 1 Pt.ST-1082S Phillips® Tip Screwdriver 4" Blade, No. 2 Pt.ST-1083S Phillips® Tip Screwdriver 6" Blade, No. 3 Pt.ST-1084S Phillips® Tip Screwdriver 8" Blade, No. 4 Pt.ZW-53 13 Pc. Hex Key Wrench Set .050- 3/8"ZW-59 13 Pc. Long Hex Key Wrench Set ZW-69 9 Pc. Metric Hex Key Wrench Set
300 PIECE MASTER TOOL SETITEM NO. 97300 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 37
Visit us at...www.stanleyproto.com38
MA
ST
ER
SE
TS
GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-1705 12 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1706 12 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1707 12 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1708 12 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1709 12 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1710 12 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1711 12 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1712 12 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1714 12 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1716 12 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4" GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-9898 1/4" Drive Extension 3" GW-9899 1/4" Drive Extension 6" GW-9550 1/4" Drive Spinner30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"
30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"HW-1520 6 Pt. Deep Inch Socket 3/8" Drive 5/8"HW-1522 6 Pt. Deep Inch Socket 3/8" Drive 11/16"HW-1524 6 Pt. Deep Inch Socket 3/8" Drive 3/4"HW-1526 6 Pt. Deep Inch Socket 3/8" Drive 13/16"HW-1528 6 Pt. Deep Inch Socket 3/8" Drive 7/8"30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"34988 3/8" Drive Extension 3" 34945B 3/8" Drive Round Head Reversible Ratchet40612 6 Pt. Standard Inch Socket 1/2" Drive 3/8"40614 6 Pt. Standard Inch Socket 1/2" Drive 7/16"40616 6 Pt. Standard Inch Socket 1/2" Drive 1/2"40618 6 Pt. Standard Inch Socket 1/2" Drive 9/16"40620 6 Pt. Standard Inch Socket 1/2" Drive 5/8"40622 6 Pt. Standard Inch Socket 1/2" Drive 11/16"40624 6 Pt. Standard Inch Socket 1/2" Drive 3/4"40626 6 Pt. Standard Inch Socket 1/2" Drive 13/16"40628 6 Pt. Standard Inch Socket 1/2" Drive 7/8"40630 6 Pt. Standard Inch Socket 1/2" Drive 15/16"40632 6 Pt. Standard Inch Socket 1/2" Drive 1"40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"
296 PIECE MASTER TOOL SETITEM NO. 97296• Weight: 109 lbs.
104 Sockets & Accessories52 Wrenches23 Screwdrivers12 Punches & Chisels25 Pliers80 Miscellaneous Tools
296 PIECE MASTER TOOL SETITEM NO. 97296
Contents Description Contents Description
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
master.qxd 6/24/05 1:30 PM Page 38
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
39Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
40132 12 Pt. Standard Inch Socket 1/2" Drive 1"40416 6 Pt. Deep Inch Socket 1/2" Drive 1/2"40418 6 Pt. Deep Inch Socket 1/2" Drive 9/16"40420 6 Pt. Deep Inch Socket 1/2" Drive 5/8"40422 6 Pt. Deep Inch Socket 1/2" Drive 11/16"40424 6 Pt. Deep Inch Socket 1/2" Drive 3/4"40426 6 Pt. Deep Inch Socket 1/2" Drive 13/16"40428 6 Pt. Deep Inch Socket 1/2" Drive 7/8"40430 6 Pt. Deep Inch Socket 1/2" Drive 15/16"40432 6 Pt. Deep Inch Socket 1/2" Drive 1"49966 1/2" Drive Extension 5" 49945B 1/2" Drive Round Head Reversible RatchetBW-1160 Satin Finish - Combination Wrench 3/8"BW-1161 Satin Finish - Combination Wrench 7/16"BW-1162 Satin Finish - Combination Wrench 1/2"BW-1163 Satin Finish - Combination Wrench 9/16"BW-1164 Satin Finish - Combination Wrench 5/8"BW-1165 Satin Finish - Combination Wrench 11/16"BW-1166 Satin Finish - Combination Wrench 3/4"BW-1167A Satin Finish - Combination Wrench 13/16"BW-1167 Satin Finish - Combination Wrench 7/8"BW-1168 Satin Finish - Combination Wrench 15/16"BW-1170 Satin Finish - Combination Wrench 1"BW-1171 Satin Finish - Combination Wrench 1-1/16"BW-1172 Satin Finish - Combination Wrench 1-1/8"BW-1173 Satin Finish - Combination Wrench 1-1/4"4020P Full Polish - Open End Wrench Inch 1/4" X 5/16"4723P Full Polish - Open End Wrench Inch 3/8" X 7/16"4724P Full Polish - Open End Wrench Inch 7/16" X 1/2"4725P Full Polish - Open End Wrench Inch 1/2" X 9/16"4727P Full Polish - Open End Wrench Inch 5/8" X 11/16"4728P Full Polish - Open End Wrench Inch 11/16" X 3/4"4732P Full Polish - Open End Wrench Inch 13/16" X 7/8"4033P Full Polish - Open End Wrench Inch 15/16" X 1"BWE-67MP Full Polish - Open End Wrench Metric 6 mm X 7 mmBWE-89MP Full Polish - Open End Wrench Metric 8 mm X 9 mmBWE-1011MP Full Polish - Open End Wrench Metric 10 mm X 11 mmBWE-1213MP Full Polish - Open End Wrench Metric 12 mm X 13 mmBWE-1415MP Full Polish - Open End Wrench Metric 14 mm X 15 mmBWE-1617MP Full Polish - Open End Wrench Metric 16 mm X 17 mmBWE-1819MP Full Polish - Open End Wrench Metric 18 mm X 19 mmBWE-2022MP Full Polish - Open End Wrench Metric 20 mm X 22 mmFN-1402P Flare Nut Wrench - Inch 3/8" X 7/16"FN-1404P Flare Nut Wrench - Inch 1/2" X 9/16"FN-1406P Flare Nut Wrench - Inch 5/8" X 11/16"FN-1410P Flare Nut Wrench - Inch 3/4" X 1"BWS-1202P Box End Wrench Long - Inch 5/16" X 3/8"BWS-1206P Box End Wrench Long - Inch 7/16" X 1/2"BWS-1211P Box End Wrench Long - Inch 9/16" X 5/8"BWS-1214P Box End Wrench Long - Inch 11/16" X 3/4"BWS-1216P Box End Wrench Long - Inch 13/16" X 7/8"BWS-1218P Box End Wrench Long - Inch 15/16" X 1"AW-1004-1 Adjustable Wrench 4"AW-1006-1 Adjustable Wrench 6"AW-1008-1 Adjustable Wrench 8"
AW-1010-1 Adjustable Wrench 10"3114 Ignition Open End Wrench 13/64"3116 Ignition Open End Wrench 7/32"3118 Ignition Open End Wrench 15/64"3120 Ignition Open End Wrench 1/4"3122 Ignition Open End Wrench 17/64"3124 Ignition Open End Wrench 9/32"3128 Ignition Open End Wrench 5/16"3130 Ignition Open End Wrench 11/32"3132 Ignition Open End Wrench 3/8"3134 Ignition Open End Wrench 7/16"CT-1464 Pin Punch 7" Length, 1/4" PointCT-1003 Cold Chisel 5-1/4" Length, 3/8" EdgeCT-1004 Cold Chisel 5-1/2" Length, 7/16" EdgeCT-1006 Cold Chisel 6-1/2" Length, 5/8" EdgeCT-1008 Cold Chisel 7" Length, 3/4" EdgeCT-1010 Cold Chisel 7-1/2" Length, 7/8" EdgeCT-1453 Pin Punch 5" Length, 1/8" PointCT-1454 Pin Punch 5-1/4" Length, 5/32" PointCT-1456 Pin Punch 5-1/2" Length, 3/16" PointCT-1509 Aligning Punch 11" Length, 1/4" PointCT-1303 Center Punch 5" Length, 5/32" PointCT-1306 Center Punch 6" Length, 1/4" PointHW-9442 3/8" Drive Hex Bit Socket Inch 1/8"HW-9444 3/8" Drive Hex Bit Socket Inch 5/32"HW-9448 3/8" Drive Hex Bit Socket Inch 7/32"HW-9447 3/8" Drive Hex Bit Socket Inch 1/4"HW-9446 3/8" Drive Hex Bit Socket Inch 5/16"HW-9445 3/8" Drive Hex Bit Socket Inch 3/8"ZW-53 13 Pc. Hex Key Wrench Set .050- 3/8"ZW-59 13 Pc. Long Hex Key Wrench Set ZW-69 9 Pc. Metric Hex Key Wrench SetPT-1052-1 6" Diagonal Cutting Plier PT-1057-1 7" Heavy-Duty Diagonal Cutting PlierPT-1108-1 8" Linesman Plier PT-1128-1 6-1/2" Long Nose Sidecutting PlierPT-1149-1 6" Curved Needle Nose PlierPT-1002-1 6" Heavy Duty Slip JointPT-1050 8-1/2" Wire Stripper and Crimper Plier940-JS 40 Pc. Insert Bit SetST-1043S Electrician's Slotted Tip Screwdriver 3" Blade, 3/16" TipST-1046S Electrician's Slotted Tip Screwdriver 6" Blade, 3/16" TipST-1048S Electrician's Slotted Tip Screwdriver 8" Blade, 3/16" TipST-1004S Round Shank Slotted Tip Screwdriver 4" Blade, 1/4" TipST-1006S Round Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1008S Round Shank Slotted Tip Screwdriver 8" Blade, 3/8" TipST-106S 5 Pc. Slotted Screwdriver SetST-105S 5 Pc. Phillips® Screwdriver SetST-127S 7 Pc. Torx® Screwdriver SetST-803 Nut Driver Inch 1/4"ST-806 Nut Driver Inch 5/16"ST-809 Nut Driver Inch 11/32"ST-812 Nut Driver Inch 3/8"ST-815 Nut Driver Inch 7/16"84-597 18 Pc. Retaining Ring Plier Set
296 PIECE MASTER TOOL SETITEM NO. 97296 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 39
Visit us at...www.stanleyproto.com40
MA
ST
ER
SE
TS
GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1507 6 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mmGW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mmGW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mmGW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-506M 6 Pt. Deep Metric Socket 1/4" Drive 6 mmGW-507M 6 Pt. Deep Metric Socket 1/4" Drive 7 mmGW-508M 6 Pt. Deep Metric Socket 1/4" Drive 8 mmGW-509M 6 Pt. Deep Metric Socket 1/4" Drive 9 mmGW-510M 6 Pt. Deep Metric Socket 1/4" Drive 10 mmGW-511M 6 Pt. Deep Metric Socket 1/4" Drive 11 mmGW-512M 6 Pt. Deep Metric Socket 1/4" Drive 12 mmGW-513M 6 Pt. Deep Metric Socket 1/4" Drive 13 mmGW-9945B 1/4" Drive Round Head Reversible Ratchet
GW-9550 1/4" Drive Spinner34960 1/4" Drive 1/4" X 3/8" AdapterGW-9898 1/4" Drive Extension 3" GW-9899 1/4" Drive Extension 6" 31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"31114 8 Pt. Standard Inch Socket 3/8" Drive 7/16"31116 8 Pt. Standard Inch Socket 3/8" Drive 1/2"30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"30630 6 Pt. Standard Inch Socket 3/8" Drive 15/16"30632 6 Pt. Standard Inch Socket 3/8" Drive 1"32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm32008M 6 Pt. Standard Metric Socket 3/8" Drive 8 mm32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm30010A 12 Pt. Standard Inch Socket 3/8" Drive 5/16"30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"
220 PIECE MASTER TOOL SETITEM NO. 97220• Weight: 31 lbs.
160 Sockets and Accessories20 Wrenches40 Miscellaneous Tools
220 PIECE MASTER TOOL SETITEM NO. 97220
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 40
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
41Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"34007M 12 Pt. Standard Metric Socket 3/8" Drive 7 mm34008M 12 Pt. Standard Metric Socket 3/8" Drive 8 mm34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"30428 12 Pt. Deep Inch Socket 3/8" Drive 7/8"30430 12 Pt. Deep Inch Socket 3/8" Drive 15/16"30432 12 Pt. Deep Inch Socket 3/8" Drive 1"HW-1510M 6 Pt. Deep Metric Socket 3/8" Drive 10 mmHW-1511M 6 Pt. Deep Metric Socket 3/8" Drive 11 mmHW-1512M 6 Pt. Deep Metric Socket 3/8" Drive 12 mmHW-1513M 6 Pt. Deep Metric Socket 3/8" Drive 13 mmHW-1514M 6 Pt. Deep Metric Socket 3/8" Drive 14 mmHW-1515M 6 Pt. Deep Metric Socket 3/8" Drive 15 mmHW-1517M 6 Pt. Deep Metric Socket 3/8" Drive 17 mmHW-1518M 6 Pt. Deep Metric Socket 3/8" Drive 18 mmHW-1519M 6 Pt. Deep Metric Socket 3/8" Drive 19 mmHW-1520S 3/8" Drive Spark Plug Socket 5/8"34945B 3/8" Drive Round Head Reversible Ratchet34988 3/8" Drive Extension 3" 34987 3/8" Drive Extension 6" 34963 3/8" Drive 3/8" x 1/4" Adapter34966 3/8" Drive 3/8" x 1/2" Adapter43010M 12 Pt. Standard Metric Socket 1/2" Drive 10 mm43011M 12 Pt. Standard Metric Socket 1/2" Drive 11 mm43012M 12 Pt. Standard Metric Socket 1/2" Drive 12 mm43013M 12 Pt. Standard Metric Socket 1/2" Drive 13 mm43014M 12 Pt. Standard Metric Socket 1/2" Drive 14 mm42015M 12 Pt. Standard Metric Socket 1/2" Drive 15 mm42016M 12 Pt. Standard Metric Socket 1/2" Drive 16 mm42017M 12 Pt. Standard Metric Socket 1/2" Drive 17 mm42018M 12 Pt. Standard Metric Socket 1/2" Drive 18 mm42019M 12 Pt. Standard Metric Socket 1/2" Drive 19 mm42020M 12 Pt. Standard Metric Socket 1/2" Drive 20 mm42021M 12 Pt. Standard Metric Socket 1/2" Drive 21 mm40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"
40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"40132 12 Pt. Standard Inch Socket 1/2" Drive 1"42010M 6 Pt. Standard Metric Socket 1/2" Drive 10 mm42011M 6 Pt. Standard Metric Socket 1/2" Drive 11 mm42012M 6 Pt. Standard Metric Socket 1/2" Drive 12 mm42013M 6 Pt. Standard Metric Socket 1/2" Drive 13 mm42014M 6 Pt. Standard Metric Socket 1/2" Drive 14 mm43015M 6 Pt. Standard Metric Socket 1/2" Drive 15 mm43017M 6 Pt. Standard Metric Socket 1/2" Drive 17 mm43019M 6 Pt. Standard Metric Socket 1/2" Drive 19 mm43021M 6 Pt. Standard Metric Socket 1/2" Drive 21 mm43022M 6 Pt. Standard Metric Socket 1/2" Drive 22 mm40320S 1/2" Drive Spark Plug Socket 5/8"40326S 1/2" Drive Spark Plug Socket 13/16"49964 1/2" Drive Extension 2" 49945B 1/2" Drive Round Head Reversible RatchetBW-1160 Satin Finish - Combination Wrench 3/8"BW-1161 Satin Finish - Combination Wrench 7/16"BW-1162 Satin Finish - Combination Wrench 1/2"BW-1163 Satin Finish - Combination Wrench 9/16"BW-1164 Satin Finish - Combination Wrench 5/8"BW-1166 Satin Finish - Combination Wrench 3/4"BW-1110M Satin Finish - Combination Wrench Metric 10 mmBW-1111M Satin Finish - Combination Wrench Metric 11 mmBW-1112M Satin Finish - Combination Wrench Metric 12 mmBW-1113M Satin Finish - Combination Wrench Metric 13 mmBW-1114M Satin Finish - Combination Wrench Metric 14 mmBW-1115M Satin Finish - Combination Wrench Metric 15 mm3114 Ignition Open End Wrench 13/64"3116 Ignition Open End Wrench 7/32"3118 Ignition Open End Wrench 15/64"3120 Ignition Open End Wrench 1/4"3122 Ignition Open End Wrench 17/64"3124 Ignition Open End Wrench 9/32"3128 Ignition Open End Wrench 5/16"3130 Ignition Open End Wrench 11/32"HW-9442 Hex Bit Socket Inch 1/8"HW-9444 Hex Bit Socket Inch 5/32"HW-9445 Hex Bit Socket Inch 3/8"HW-9446 Hex Bit Socket Inch 5/16"HW-9447 Hex Bit Socket Inch 1/4"HW-9448 Hex Bit Socket Inch 7/32"HW-9449 Hex Bit Socket Inch 3/16" ST-803 Nut Driver Inch 1/4"ST-806 Nut Driver Inch 5/16"ST-809 Nut Driver Inch 11/32"ST-812 Nut Driver Inch 3/8"ST-815 Nut Driver Inch 7/16"ZW-59 13 Pc. Long Hex Key Wrench Set ZW-53 13 Pc. Hex Key Wrench Set .050- 3/8"ZW-69 9 Pc. Metric Hex Key Wrench Set
220 PIECE MASTER TOOL SETITEM NO. 97220 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 41
Visit us at...www.stanleyproto.com42
MA
ST
ER
SE
TS
GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mmGW-645M 6 Pt. Standard Metric Socket 1/4" Drive 4.5 mmGW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-655M 6 Pt. Standard Metric Socket 1/4" Drive 5.5 mmGW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mmGW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mmGW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1507 6 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-504M 6 Pt. Deep Metric Socket 1/4" Drive 7/16"GW-505M 6 Pt. Deep Metric Socket 1/4" Drive 5 mmGW-506M 6 Pt. Deep Metric Socket 1/4" Drive 6 mmGW-507M 6 Pt. Deep Metric Socket 1/4" Drive 7 mmGW-508M 6 Pt. Deep Metric Socket 1/4" Drive 8 mmGW-509M 6 Pt. Deep Metric Socket 1/4" Drive 9 mmGW-510M 6 Pt. Deep Metric Socket 1/4" Drive 10 mm
GW-511M 6 Pt. Deep Metric Socket 1/4" Drive 11 mmGW-512M 6 Pt. Deep Metric Socket 1/4" Drive 12 mmGW-513M 6 Pt. Deep Metric Socket 1/4" Drive 13 mmGW-9898 1/4" Drive Extension 3" GW-9899 1/4" Drive Extension 6" GW-9945B 1/4" Drive Round Head Reversible RatchetGW-9550 1/4" Drive Spinner31110 8 Pt. Standard Inch Socket 3/8" Drive 5/16"31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"31114 8 Pt. Standard Inch Socket 3/8" Drive 7/16"30010 6 Pt. Standard Inch Socket 3/8" Drive 5/16"30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"32008M 6 Pt. Standard Metric Socket 3/8" Drive 8 mm32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm300301 12 Pt. Standard Inch Socket 3/8" Drive 15/16"30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
205 PIECE MASTER TOOL SETITEM NO. 97205• Weight: 41 lbs.
150 Sockets and Accessories30 Wrenches25 Miscellaneous Tools
205 PIECE MASTER TOOL SETITEM NO. 97205
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 42
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
43Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"34008M 12 Pt. Standard Metric Socket 3/8" Drive 8 mm34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"HW-1510M 6 Pt. Deep Metric Socket 3/8" Drive 10 mmHW-1511M 6 Pt. Deep Metric Socket 3/8" Drive 11 mmHW-1512M 6 Pt. Deep Metric Socket 3/8" Drive 12 mmHW-1513M 6 Pt. Deep Metric Socket 3/8" Drive 13 mmHW-1514M 6 Pt. Deep Metric Socket 3/8" Drive 14 mmHW-1515M 6 Pt. Deep Metric Socket 3/8" Drive 15 mmHW-1517M 6 Pt. Deep Metric Socket 3/8" Drive 17 mmHW-1518M 6 Pt. Deep Metric Socket 3/8" Drive 18 mmHW-1519M 6 Pt. Deep Metric Socket 3/8" Drive 19 mm34945B 3/8" Drive Round Head Reversible Ratchet34993 3/8" Drive Universal Joint34988 3/8" Drive Extension 3" 34987 3/8" Drive Extension 6" HW-1520S 3/8" Drive Spark Plug Socket 5/8"HW-1526S 3/8" Drive Spark Plug Socket 13/16"40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"40132 12 Pt. Standard Inch Socket 1/2" Drive 1"40136 12 Pt. Standard Inch Socket 1/2" Drive 1-1/8"40140 12 Pt. Standard Inch Socket 1/2" Drive 1-1/4"
43013M 12 Pt. Standard Metric Socket 1/2" Drive 13 mm43014M 12 Pt. Standard Metric Socket 1/2" Drive 14 mm42015M 12 Pt. Standard Metric Socket 1/2" Drive 15 mm42016M 12 Pt. Standard Metric Socket 1/2" Drive 16 mm43017M 12 Pt. Standard Metric Socket 1/2" Drive 17 mm42018M 12 Pt. Standard Metric Socket 1/2" Drive 18 mm43019M 12 Pt. Standard Metric Socket 1/2" Drive 19 mm43021M 12 Pt. Standard Metric Socket 1/2" Drive 21 mm43022M 12 Pt. Standard Metric Socket 1/2" Drive 22 mm43024M 12 Pt. Standard Metric Socket 1/2" Drive 24 mm43027M 12 Pt. Standard Metric Socket 1/2" Drive 27 mm42030M 12 Pt. Standard Metric Socket 1/2" Drive 30 mm42032M 12 Pt. Standard Metric Socket 1/2" Drive 32 mm40316 12 Pt. Deep Inch Socket 1/2" Drive 1/2"40318 12 Pt. Deep Inch Socket 1/2" Drive 9/16"40320 12 Pt. Deep Inch Socket 1/2" Drive 5/8"40322 12 Pt. Deep Inch Socket 1/2" Drive 11/16"40324 12 Pt. Deep Inch Socket 1/2" Drive 3/4"40326 12 Pt. Deep Inch Socket 1/2" Drive 13/16"49945B 1/2" Drive Round Head Reversible Ratchet49966 1/2" Drive Extension 5" 49978 1/2" Drive Universal JointBW-1156 Satin Finish - Combination Wrench 1/4"BW-1159 Satin Finish - Combination Wrench 5/16"BW-1160 Satin Finish - Combination Wrench 3/8"BW-1161 Satin Finish - Combination Wrench 7/16"BW-1162 Satin Finish - Combination Wrench 1/2"BW-1163 Satin Finish - Combination Wrench 9/16"BW-1107MFP Satin Finish - Combination Wrench Metric 7 mmBW-1108MFP Satin Finish - Combination Wrench Metric 8 mmBW-1109MFP Satin Finish - Combination Wrench Metric 9 mmBW-1110MFP Satin Finish - Combination Wrench Metric 10 mmBW-1111MFP Satin Finish - Combination Wrench Metric 11 mmBW-1112MFP Satin Finish - Combination Wrench Metric 12 mmZW-53 13 Pc Hex Key Wrench Set .050- 3/8"ZW-69 9 Pc Metric Hex Key Wrench SetST-803 Nut Driver Inch 1/4"ST-806 Nut Driver Inch 5/16"ST-809 Nut Driver Inch 11/32"ST-812 Nut Driver Inch 3/8"ST-815 Nut Driver Inch 7/16"ST-610S Torx® Screwdriver T10ST-615S Torx® Screwdriver T15ST-620S Torx® Screwdriver T20ST-625S Torx® Screwdriver T25ST-630S Torx® Screwdriver T30ST-105S 5 Pc Phillips® Screwdriver SetST-106S 6 Pc Slotted Screwdriver SetPT-1052-1 6" Diagonal Cutting Plier PT-1002-1 6" Heavy Duty Slip Joint
205 PIECE MASTER TOOL SETITEM NO. 97205 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 43
Visit us at...www.stanleyproto.com44
MA
ST
ER
SE
TS
192 PIECE MASTER TOOL SETITEM NO. 97147• Weight: 141 lbs.
83 Sockets & Accessories 28 Wrenches81 Miscellaneous Tools
Phillips® is a registered trademark of Phillips Screw Co.
master.qxd 6/24/05 1:30 PM Page 44
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
45Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
34960 1/4" Drive 1/4" X 3/8" AdapterGW-9898 1/4" Drive Extension 3" GW-9550 1/4" Drive SpinnerGW-9899 1/4" Drive Extension 6" GW-9749B 1/4" Drive Flex Handle RatchetGW-9945B 1/4" Drive Round Head Reversible RatchetGW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1507 6 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"34986B 3/8" Drive Flex Handle Ratchet34988 3/8" Drive Extension 3" 34987 3/8" Drive Extension 6" 34984 3/8" Drive Extension 11" 34989 3/8" Drive Extension 1-3/4" 34993 3/8" Drive Universal Joint34945B 3/8" Drive Round Head Reversible Ratchet34963 3/8" Drive 3/8" x 1/4" Adapter34966 3/8" Drive 3/8" x 1/2" Adapter30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"HW-1520 6 Pt. Deep Inch Socket 3/8" Drive 5/8"HW-1522 6 Pt. Deep Inch Socket 3/8" Drive 11/16"HW-1524 6 Pt. Deep Inch Socket 3/8" Drive 3/4"HW-1526 6 Pt. Deep Inch Socket 3/8" Drive 13/16"HW-1528 6 Pt. Deep Inch Socket 3/8" Drive 7/8"HW-1520S 3/8" Drive Spark Plug Socket 5/8"HW-1526S 3/8" Drive Spark Plug Socket 13/16"49945B 1/2" Drive Round Head Reversible Ratchet49964 1/2" Drive Extension 2" 49966 1/2" Drive Extension 5" 49990 1/2" Drive Extension 10" 49978 1/2" Drive Universal Joint49988B 1/2" Drive Flex Handle Ratchet34965 1/2" Drive 1/2" x 3/8" Adapter40112 12 Pt. Standard Inch Socket 1/2" Drive 3/8"40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"
40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"40132 12 Pt. Standard Inch Socket 1/2" Drive 1"40134 12 Pt. Standard Inch Socket 1/2" Drive 1-1/16"40316 12 Pt. Deep Inch Socket 1/2" Drive 1/2"40318 12 Pt. Deep Inch Socket 1/2" Drive 9/16"40320 12 Pt. Deep Inch Socket 1/2" Drive 5/8"40322 12 Pt. Deep Inch Socket 1/2" Drive 11/16"40324 12 Pt. Deep Inch Socket 1/2" Drive 3/4"40326 12 Pt. Deep Inch Socket 1/2" Drive 13/16"40328 12 Pt. Deep Inch Socket 1/2" Drive 7/8"40330 12 Pt. Deep Inch Socket 1/2" Drive 15/16"40332 12 Pt. Deep Inch Socket 1/2" Drive 1"40334 12 Pt. Deep Inch Socket 1/2" Drive 1-1/16"40336 12 Pt. Deep Inch Socket 1/2" Drive 1-1/8"BW-1160 Satin Finish - Combination Wrench 3/8"BW-1161 Satin Finish - Combination Wrench 7/16"BW-1162 Satin Finish - Combination Wrench 1/2"BW-1163 Satin Finish - Combination Wrench 9/16"BW-1164 Satin Finish - Combination Wrench 5/8"BW-1165 Satin Finish - Combination Wrench 11/16"BW-1166 Satin Finish - Combination Wrench 3/4"BW-1167A Satin Finish - Combination Wrench 13/16"BW-1167 Satin Finish - Combination Wrench 7/8"BW-1168 Satin Finish - Combination Wrench 15/16"BW-1170 Satin Finish - Combination Wrench 1"BWS-1202P Box End Wrench Long - Inch 5/16" X 3/8"BWS-1206P Box End Wrench Long - Inch 7/16" X 1/2"BWS-1211P Box End Wrench Long - Inch 9/16" X 5/8"BWS-1214P Box End Wrench Long - Inch 11/16" X 3/4"BWS-1216P Box End Wrench Long - Inch 13/16" X 7/8"BWS-1218P Box End Wrench Long - Inch 15/16" X 1"AW-1004-1 Adjustable Wrench 4"AW-1008-1 Adjustable Wrench 8"AW-1012-1 Adjustable Wrench 12"3114 Ignition Open End Wrench 13/64"3116 Ignition Open End Wrench 7/32"3118 Ignition Open End Wrench 15/64"3120 Ignition Open End Wrench 1/4"3122 Ignition Open End Wrench 17/64"3124 Ignition Open End Wrench 9/32"3128 Ignition Open End Wrench 5/16"3130 Ignition Open End Wrench 11/32"CT-114 14 Pc. Punch and Chisel SetCT-1610 Pinch Bars 16"CT-1617 Pry Bars 15"CT-1303 Center Punch 5" Length, 5/32" PointCT-1509 Aligning Punch 11" Length, 1/4" PointST-1046S Electrician's Slotted Tip Screwdriver 6" Blade, 3/16" TipST-1048S Electrician's Slotted Tip Screwdriver 8" Blade, 3/16" TipST-1006S Round Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1004S Round Shank Slotted Tip Screwdriver 4" Blade, 1/4" TipST-1008S Round Shank Slotted Tip Screwdriver 8" Blade, 3/8" TipST-1081S Phillips® Tip Screwdriver 3" Blade, No. 1 Pt.ST-1082S Phillips® Tip Screwdriver 4" Blade, No. 2 Pt.ST-1140S Stubby Phillips® Tip Screwdriver 1-1/2" Blade, No. 2 Pt.ST-1145S Stubby Slotted Tip Screwdriver 1-1/2" Blade, 1/4" Tip ZW-53 13 Pc. Hex Key Wrench Set .050- 3/8"PT-1251 5" Ignition PlierPT-1002-1 6" Heavy Duty Slip JointPT-1263 8" Parrot Nose PlierPT-1285 Combination Internal/External Retaining PlierPT-1003-1 8" Heavy Duty Slip JointHT-1005-1 Ball Pein Hammer 16oz84-597 18 Pc. Retaining Ring Plier SetDT-55 Screw Extractor SetFT-1202 Adjustable Hacksaw FrameFT-1124 10 Pc. Hacksaw Blades33-212 Tape Measure 12'
192 PIECE MASTER TOOL SETITEM NO. 97147
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 45
Visit us at...www.stanleyproto.com46
MA
ST
ER
SE
TS
GW-9550 1/4" Drive SpinnerGW-9898 1/4" Drive Extension 3" GW-9899 1/4" Drive Extension 6" GW-9945B 1/4" Drive Round Head Reversible RatchetGW-1605 1/4" Drive 6 Pt. Standard Inch Socket 5/32"GW-1606 1/4" Drive 6 Pt. Standard Inch Socket 3/16"GW-1607 1/4" Drive 6 Pt. Standard Inch Socket 7/32"GW-1608 1/4" Drive 6 Pt. Standard Inch Socket 1/4"GW-1609 1/4" Drive 6 Pt. Standard Inch Socket 9/32"GW-1610 1/4" Drive 6 Pt. Standard Inch Socket 5/16"GW-1611 1/4" Drive 6 Pt. Standard Inch Socket 11/32"GW-1612 1/4" Drive 6 Pt. Standard Inch Socket 3/8"GW-1614 1/4" Drive 6 Pt. Standard Inch Socket 7/16"GW-1616 1/4" Drive 6 Pt. Standard Inch Socket 1/2"GW-1706 1/4" Drive 12 Pt. Standard Inch Socket 3/16"GW-1707 1/4" Drive 12 Pt. Standard Inch Socket 7/32"GW-1708 1/4" Drive 12 Pt. Standard Inch Socket 1/4"GW-1709 1/4" Drive 12 Pt. Standard Inch Socket 9/32"GW-1710 1/4" Drive 12 Pt. Standard Inch Socket 5/16"GW-1711 1/4" Drive 12 Pt. Standard Inch Socket 11/32"GW-1712 1/4" Drive 12 Pt. Standard Inch Socket 3/8"GW-1714 1/4" Drive 12 Pt. Standard Inch Socket 7/16"GW-1716 1/4" Drive 12 Pt. Standard Inch Socket 1/2"GW-1508 1/4" Drive 6 Pt. Deep Inch Socket 1/4"GW-1510 1/4" Drive 6 Pt. Deep Inch Socket 5/16"GW-1511 1/4" Drive 6 Pt. Deep Inch Socket 11/32"GW-1512 1/4" Drive 6 Pt. Deep Inch Socket 3/8"GW-1514 1/4" Drive 6 Pt. Deep Inch Socket 7/16"GW-1516 1/4" Drive 6 Pt. Deep Inch Socket 1/2"GW-507M 1/4" Drive 6 Pt. Deep Metric Socket 7 mmGW-508M 1/4" Drive 6 Pt. Deep Metric Socket 8 mmGW-509M 1/4" Drive 6 Pt. Deep Metric Socket 9 mmGW-510M 1/4" Drive 6 Pt. Deep Metric Socket 10 mmGW-511M 1/4" Drive 6 Pt. Deep Metric Socket 11 mmGW-512M 1/4" Drive 6 Pt. Deep Metric Socket 12 mmGW-513M 1/4" Drive 6 Pt. Deep Metric Socket 13 mmGW-604M 1/4" Drive 6 Pt. Standard Metric Socket 4 mmGW-605M 1/4" Drive 6 Pt. Standard Metric Socket 5 mm
GW-606M 1/4" Drive 6 Pt. Standard Metric Socket 6 mmGW-607M 1/4" Drive 6 Pt. Standard Metric Socket 7 mmGW-608M 1/4" Drive 6 Pt. Standard Metric Socket 8 mmGW-609M 1/4" Drive 6 Pt. Standard Metric Socket 9 mmGW-610M 1/4" Drive 6 Pt. Standard Metric Socket 10 mmGW-611M 1/4" Drive 6 Pt. Standard Metric Socket 11 mmGW-612M 1/4" Drive 6 Pt. Standard Metric Socket 12 mmGW-613M 1/4" Drive 6 Pt. Standard Metric Socket 13 mm34963 3/8" Drive 3/8" x 1/4" Adapter34987 3/8" Drive Extension 6" 34988 3/8" Drive Extension 3" 34945B 3/8" Drive Round Head Reversible Ratchet34986B 3/8" Drive Flex Handle RatchetHW-1520S 3/8" Drive Spark Plug Socket 5/8"30612 3/8" Drive 6 Pt. Standard Inch Socket 3/8"30614 3/8" Drive 6 Pt. Standard Inch Socket 7/16"30616 3/8" Drive 6 Pt. Standard Inch Socket 1/2"30618 3/8" Drive 6 Pt. Standard Inch Socket 9/16"30620 3/8" Drive 6 Pt. Standard Inch Socket 5/8"30622 3/8" Drive 6 Pt. Standard Inch Socket 11/16"30624 3/8" Drive 6 Pt. Standard Inch Socket 3/4"30626 3/8" Drive 6 Pt. Standard Inch Socket 13/16"32009M 3/8" Drive 6 Pt. Standard Metric Socket 9 mm32010M 3/8" Drive 6 Pt. Standard Metric Socket 10 mm32011M 3/8" Drive 6 Pt. Standard Metric Socket 11 mm32012M 3/8" Drive 6 Pt. Standard Metric Socket 12 mm32013M 3/8" Drive 6 Pt. Standard Metric Socket 13 mm32014M 3/8" Drive 6 Pt. Standard Metric Socket 14 mm32015M 3/8" Drive 6 Pt. Standard Metric Socket 15 mm32017M 3/8" Drive 6 Pt. Standard Metric Socket 17 mm32019M 3/8" Drive 6 Pt. Standard Metric Socket 19 mm30012 3/8" Drive 12 Pt. Standard Inch Socket 3/8"30014 3/8" Drive 12 Pt. Standard Inch Socket 7/16"30016 3/8" Drive 12 Pt. Standard Inch Socket 1/2"30018 3/8" Drive 12 Pt. Standard Inch Socket 9/16"30020 3/8" Drive 12 Pt. Standard Inch Socket 5/8"30022 3/8" Drive 12 Pt. Standard Inch Socket 11/16"30024 3/8" Drive 12 Pt. Standard Inch Socket 3/4"
172 PIECE MASTER TOOL SETITEM NO. 97148
Contents Description Contents Description
172 PIECE MASTER TOOL SETITEM NO. 97148• Weight: 23 lbs.
133 Sockets & Accessories21 Wrenches18 Miscellaneous Tools
Phillips® is a registered trademark of Phillips Screw Co.
master.qxd 6/24/05 1:30 PM Page 46
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
47Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
30026 3/8" Drive 12 Pt. Standard Inch Socket 13/16"34009M 3/8" Drive 12 Pt. Standard Metric Socket 9 mm34010M 3/8" Drive 12 Pt. Standard Metric Socket 10 mm34011M 3/8" Drive 12 Pt. Standard Metric Socket 11 mm34012M 3/8" Drive 12 Pt. Standard Metric Socket 12 mm34013M 3/8" Drive 12 Pt. Standard Metric Socket 13 mm34014M 3/8" Drive 12 Pt. Standard Metric Socket 14 mm34015M 3/8" Drive 12 Pt. Standard Metric Socket 15 mm34016M 3/8" Drive 12 Pt. Standard Metric Socket 16 mm34017M 3/8" Drive 12 Pt. Standard Metric Socket 17 mm34018M 3/8" Drive 12 Pt. Standard Metric Socket 18 mm34019M 3/8" Drive 12 Pt. Standard Metric Socket 19 mmHW-1512 3/8" Drive 6 Pt. Deep Inch Socket 3/8"HW-1514 3/8" Drive 6 Pt. Deep Inch Socket 7/16"HW-1516 3/8" Drive 6 Pt. Deep Inch Socket 1/2"HW-1518 3/8" Drive 6 Pt. Deep Inch Socket 9/16"HW-1520 3/8" Drive 6 Pt. Deep Inch Socket 5/8"HW-1522 3/8" Drive 6 Pt. Deep Inch Socket 11/16"HW-1524 3/8" Drive 6 Pt. Deep Inch Socket 3/4"HW-1526 3/8" Drive 6 Pt. Deep Inch Socket 13/16"HW-1510M 3/8" Drive 6 Pt. Deep Metric Socket 10 mmHW-1511M 3/8" Drive 6 Pt. Deep Metric Socket 11 mmHW-1512M 3/8" Drive 6 Pt. Deep Metric Socket 12 mmHW-1513M 3/8" Drive 6 Pt. Deep Metric Socket 13 mmHW-1514M 3/8" Drive 6 Pt. Deep Metric Socket 14 mmHW-1515M 3/8" Drive 6 Pt. Deep Metric Socket 15 mmHW-1517M 3/8" Drive 6 Pt. Deep Metric Socket 17 mmHW-1518M 3/8" Drive 6 Pt. Deep Metric Socket 18 mmHW-1519M 3/8" Drive 6 Pt. Deep Metric Socket 19 mm31110 3/8" Drive 8 Pt. Standard Inch Socket 5/16"31112 3/8" Drive 8 Pt. Standard Inch Socket 3/8"31114 3/8" Drive 8 Pt. Standard Inch Socket 7/16"49966 1/2" Drive Extension 5" 49945B 1/2" Drive Ratchet Round Head Knurled Non-Q.R.40326S 1/2" Drive Spark Plug Socket 13/16"40114 1/2" Drive 12 Pt. Standard Inch Socket 7/16"40116 1/2" Drive 12 Pt. Standard Inch Socket 1/2"40118 1/2" Drive 12 Pt. Standard Inch Socket 9/16"40120 1/2" Drive 12 Pt. Standard Inch Socket 5/8"40122 1/2" Drive 12 Pt. Standard Inch Socket 11/16"
40124 1/2" Drive 12 Pt. Standard Inch Socket 3/4"40126 1/2" Drive 12 Pt. Standard Inch Socket 13/16"40128 1/2" Drive 12 Pt. Standard Inch Socket 7/8"40130 1/2" Drive 12 Pt. Standard Inch Socket 15/16"43010M 1/2" Drive 12 Pt. Standard Metric Socket 10 mm43012M 1/2" Drive 12 Pt. Standard Metric Socket 12 mm43013M 1/2" Drive 12 Pt. Standard Metric Socket 13 mm43014M 1/2" Drive 12 Pt. Standard Metric Socket 14 mm42015M 1/2" Drive 12 Pt. Standard Metric Socket 15 mm42016M 1/2" Drive 12 Pt. Standard Metric Socket 16 mm42017M 1/2" Drive 12 Pt. Standard Metric Socket 17 mm42018M 1/2" Drive 12 Pt. Standard Metric Socket 18 mm42019M 1/2" Drive 12 Pt. Standard Metric Socket 19 mm42021M 1/2" Drive 12 Pt. Standard Metric Socket 21 mm42022M 1/2" Drive 12 Pt. Standard Metric Socket 22 mm42024M 1/2" Drive 12 Pt. Standard Metric Socket 24 mm42025M 1/2" Drive 12 Pt. Standard Metric Socket 25 mmBW-1160 Combination Wrench - Satin Finish 3/8"BW-1162 Combination Wrench - Satin Finish 1/2"BW-1161 Combination Wrench - Satin Finish 7/16"BW-1163 Combination Wrench - Satin Finish 9/16"BW-1164 Combination Wrench - Satin Finish 5/8"BW-1166 Combination Wrench - Satin Finish 3/4"BW-1109M Combination Wrench Metric- Satin Finish 9 mmBW-1110M Combination Wrench Metric- Satin Finish 10 mmBW-1111M Combination Wrench Metric- Satin Finish 11 mmBW-1112M Combination Wrench Metric- Satin Finish 12 mmBW-1114M Combination Wrench Metric- Satin Finish 14 mmBW-1117M Combination Wrench Metric- Satin Finish 17 mmBW-1119M Combination Wrench Metric- Satin Finish 19 mm3114 Ignition Open End Wrench 13/64"3116 Ignition Open End Wrench 7/32"3118 Ignition Open End Wrench 15/64"3120 Ignition Open End Wrench 1/4"3122 Ignition Open End Wrench 17/64"3124 Ignition Open End Wrench 9/32"3128 Ignition Open End Wrench 5/16"3130 Ignition Open End Wrench 11/32"ZW-53 13 Pc. Hex Key Wrench Set .050- 3/8"ST-106S 5 Pc. Phillips® Screwdriver Set
172 PIECE MASTER TOOL SETITEM NO. 97148 (CONTINUED)
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 47
Visit us at...www.stanleyproto.com48
MA
ST
ER
SE
TS
Phillips® is a registered trademark of Phillips Screw Co.
GW-9945B 1/4" Drive Round Head Reversible RatchetGW-9550 1/4" Drive SpinnerGW-9898 1/4" Drive Extension 3" GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"34986B 3/8" Drive Flex Handle34945B 3/8" Drive Round Head Reversible Ratchet34988 3/8" Drive Extension 3" 34987 3/8" Drive Extension 6" 30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"HW-1520S 3/8" Drive Spark Plug Socket 5/8"BW-1160 Satin Finish - Combination Wrench 3/8"BW-1161 Satin Finish - Combination Wrench 7/16"BW-1162 Satin Finish - Combination Wrench 1/2"BW-1163 Satin Finish - Combination Wrench 9/16"BW-1164 Satin Finish - Combination Wrench 5/8"
BW-1165 Satin Finish - Combination Wrench 11/16"BW-1166 Satin Finish - Combination Wrench 3/4"BW-1167A Satin Finish - Combination Wrench 13/16"BW-1167 Satin Finish - Combination Wrench 7/8"BW-1168 Satin Finish - Combination Wrench 15/16"BW-1170 Satin Finish - Combination Wrench 1"3114 Ignition Open End Wrench 13/64"3116 Ignition Open End Wrench 7/32"3118 Ignition Open End Wrench 15/64"3120 Ignition Open End Wrench 1/4"3122 Ignition Open End Wrench 17/64"3124 Ignition Open End Wrench 9/32"3128 Ignition Open End Wrench 5/16"3130 Ignition Open End Wrench 11/32"CT-1003 Cold Chisel 5 1/4" Length, 3/8" EdgeCT-1004 Cold Chisel 5 1/2" Length, 7/16" EdgeCT-1456 Pin Punch 5 1/2" Length, 3/16" PointCT-1454 Pin Punch 5 1/4" Length, 5/32" PointST-1004S Round Shank Slotted Tip Screwdriver 4" Blade, 1/4" TipST-1006S Round Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1028S Square Shank Slotted Tip Screwdriver 8" Blade, 3/8" TipST-1082S Phillips® Tip Screwdriver 4" Blade, No. 2 Pt.ZW-53 13 Pc. Hex Key Wrench Set .050- 3/8"PT-1057-1 7" Heavy-Duty Diagonal Cutting PlierPT-1251 5" Ignition PlierPT-1003-1 8" Heavy Duty Slip JointPT-1002-1 6" Heavy Duty Slip JointFT-1202 HacksawFT-1124 10 Pc. Hacksaw BladesHT-1005-1 Ball Pein Hammer 16oz
82 PIECE MASTER TOOL SETITEM NO. 9782• Weight: 30 lbs.
26 Sockets & Accessories19 Wrenches4 Screwdrivers4 Pliers4 Punches and Chisels25 Miscellaneous Tools
82 PIECE MASTER TOOL SETITEM NO. 9782
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 48
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MA
ST
ER
SE
TS
49Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M A S T E R T O O L S E T S
34945B 3/8" Drive Round Head Reversible Ratchet34993 3/8" Drive Universal Joint34988 3/8" Drive Extension 3" 34987 3/8" Drive Extension 6" 30012 3/8" Drive 12 Pt. Standard Inch Socket 3/8"30014 3/8" Drive 12 Pt. Standard Inch Socket 7/16"30016 3/8" Drive 12 Pt. Standard Inch Socket 1/2"30018 3/8" Drive 12 Pt. Standard Inch Socket 9/16"30020 3/8" Drive 12 Pt. Standard Inch Socket 5/8"30022 3/8" Drive 12 Pt. Standard Inch Socket 11/16"30024 3/8" Drive 12 Pt. Standard Inch Socket 3/4"30026 3/8" Drive 12 Pt. Standard Inch Socket 13/16"30028 3/8" Drive 12 Pt. Standard Inch Socket 7/8"BW-1162 Combination Wrench - Satin Finish 1/2"BW-1160 Combination Wrench - Satin Finish 3/8"BW-1164 Combination Wrench - Satin Finish 5/8"
BW-1161 Combination Wrench - Satin Finish 7/16"BW-1163 Combination Wrench - Satin Finish 9/16"BW-1166 Combination Wrench - Satin Finish 3/4"AW-1008-1 Adjustable Wrench 8"ST-1081S Phillips® Tip Screwdriver 3" Blade, No. 1 Pt.ST-1082S Phillips® Tip Screwdriver 4" Blade, No. 2 Pt.ST-1006S Round Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1004S Round Shank Slotted Tip Screwdriver 1/4" slotST-1151S Pocket Screwdriver 2" Blade, No. 0 Pt.PT-1002-1 6" Heavy Duty Slip JointPT-1250-1 Plier Arc Joint 9-1/210-099 Utility KnifeHT-1005-1 Ball Pein Hammer 16 oz33-212 PowerLock® Tape Rule 12'94100B Black Tool Box with Tray
30 PIECE MASTER TOOL SETITEM NO. 9730-BX• Weight: 16 lbs.
13 Sockets & Accessories7 Wrenches5 Screwdrivers2 Pliers3 Miscellaneous Tools
30 PIECE MASTER TOOL SETITEM NO. 9730-B
Contents Description Contents Description
master.qxd 6/24/05 1:30 PM Page 49
Shown above: quick release positive-grip ratchet. Chrome plated with full-polish finish, 45 tooth double pawl design, 4.0 degree swing arc, knurled speed ring and 10" long. Limited Lifetime Warranty. Made in the USA. 1-800-800-TOOL or www.stanleyproto.com
master.qxd 6/24/05 1:30 PM Page 50
COMBINATION SOCKET SETS.CHOOSE THE SET THAT WORKS BEST FOR YOU.
The Combination Socket Sets program includes multi-drive standard and metric tools with accessories,
as well as single drive socket sets. Each set comes with a plastic box or a clip rail to help you store,
protect and organize your tools.
Sockets Sets.qxd 6/24/05 1:33 PM Page 51
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.Visit us at...
www.stanleyproto.com52
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
ITEM NO. 97110• Weight: 18.3 lbs.
Contents Description Contents Description
GW-9899 1/4" Drive Extension 6"
GW-9898 1/4" Drive Extension 3"
GW-9550 1/4" Drive Spinner
GW-9945B 1/4" Drive Round Head Reversible Ratchet
34960 1/4" Drive 1/4" X 3/8" Adapter
GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"
GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mm
GW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mm
GW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mm
GW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mm
GW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mm
GW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mm
GW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mm
GW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mm
GW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mm
GW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"
GW-1507 6 Pt. Deep Inch Socket 1/4" Drive 7/32"
GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"
GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"
GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"
GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"
GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"
GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"
GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"
GW-504M 6 Pt. Deep Metric Socket 1/4" Drive 4 mm
GW-505M 6 Pt. Deep Metric Socket 1/4" Drive 5 mm
GW-506M 6 Pt. Deep Metric Socket 1/4" Drive 6 mm
GW-507M 6 Pt. Deep Metric Socket 1/4" Drive 7 mm
GW-508M 6 Pt. Deep Metric Socket 1/4" Drive 8 mm
GW-509M 6 Pt. Deep Metric Socket 1/4" Drive 9 mm
GW-510M 6 Pt. Deep Metric Socket 1/4" Drive 10 mm
GW-511M 6 Pt. Deep Metric Socket 1/4" Drive 11 mm
GW-512M 6 Pt. Deep Metric Socket 1/4" Drive 12 mm
GW-513M 6 Pt. Deep Metric Socket 1/4" Drive 13 mm
34945B 3/8" Drive Round Head Reversible Ratchet
30326 3/8" Drive Spark Plug Socket 13/16" Universal
34988 3/8" Drive Extension 3"
30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"
30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"
30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"
30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"
30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"
130-PIECE 1/4", 3/8" AND 1/2" DRIVE METRIC AND FRACTIONAL TOOL SET
Sockets Sets.qxd 6/24/05 1:33 PM Page 52
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
53Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1 / 4 " , 3 / 8 " & 1 / 2 " D R I V E S O C K E T S E T S
30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"
30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"
30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"
34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm
34010M 12 Pt. Standard Metric Socket 3/8" Dr. 10 mm
34011M 12 Pt. Standard Metric Socket 3/8" Dr. 11 mm
34012M 12 Pt. Standard Metric Socket 3/8" Dr. 12 mm
34013M 12 Pt. Standard Metric Socket 3/8" Dr. 13 mm
34014M 12 Pt. Standard Metric Socket 3/8" Dr. 14 mm
34015M 12 Pt. Standard Metric Socket 3/8" Dr. 15 mm
34016M 12 Pt. Standard Metric Socket 3/8" Dr. 16 mm
34017M 12 Pt. Standard Metric Socket 3/8" Dr. 17 mm
34018M 12 Pt. Standard Metric Socket 3/8" Dr. 18 mm
30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"
30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"
30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"
30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"
30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"
30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"
30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"
30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"
HW-1609M 12 Pt. Deep Metric Socket 3/8" Drive 9 mm
HW-1610M 12 Pt. Deep Metric Socket 3/8" Drive 10 mm
HW-1611M 12 Pt. Deep Metric Socket 3/8" Drive 11 mm
HW-1612M 12 Pt. Deep Metric Socket 3/8" Drive 12 mm
HW-1613M 12 Pt. Deep Metric Socket 3/8" Drive 13 mm
HW-1614M 12 Pt. Deep Metric Socket 3/8" Drive 14 mm
HW-1615M 12 Pt. Deep Metric Socket 3/8" Drive 15 mm
HW-1616M 12 Pt. Deep Metric Socket 3/8" Drive 16 mm
31108 8 Pt. Standard Inch Socket 3/8" Drive 1/4"
31110 8 Pt. Standard Inch Socket 3/8" Drive 5/16"
31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"
49945B 1/2" Drive Round Head Reversible Ratchet
40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"
40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"
40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"
40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"
40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"
42019M 12 Pt. Standard Metric Socket 1/2" Dr. 19 mm
42021M 12 Pt. Standard Metric Socket 1/2" Dr. 21 mm
42022M 12 Pt. Standard Metric Socket 1/2" Dr. 22 mm
42023M 12 Pt. Standard Metric Socket 1/2" Dr. 23 mm
42024M 12 Pt. Standard Metric Socket 1/2" Dr. 24 mm
BW-1160 Combination Wrench- Satin Finish 3/8"
BW-1161 Combination Wrench- Satin Finish 7/16"
BW-1163 Combination Wrench- Satin Finish 9/16"
BW-1164 Combination Wrench- Satin Finish 5/8"
BW-1110M Combination Wrench Metric- Satin Finish 10 mm
BW-1112M Combination Wrench Metric- Satin Finish 12 mm
BW-1114M Combination Wrench Metric- Satin Finish14 mm
BW-1115M Combination Wrench Metric- Satin Finish 15 mm
4985 7 Pc Hex Key Set-Metric
4982 7 Pc Hex Key Set-Inch
900-21 Insert Bit Phillips® # 1 Pt.
900-22 Insert Bit Phillips® # 2 Pt.
900-23 Insert Bit Phillips® #3 Pt.
9000H Insert Bit Holder
900-4 Insert Bit Slotted Bit 3/16"
900-6 Insert Bit Slotted Bit 1/4"
900-7 Insert Bit Slotted Bit 9/32"
9000-T10 Torx® Bit T10
9000-T15 Torx® Bit T15
9000-T20 Torx® Bit T20
9000-T25 Torx® Bit T25
9000-T27 Torx® Bit T27
9000-T30 Torx® Bit T30
ITEM NO. 97110 (CONTINUED)• Weight: 18.3 lbs.
Contents Description Contents Description
130-PIECE 1/4", 3/8" AND 1/2" DRIVE METRIC AND FRACTIONAL TOOL SET
Sockets Sets.qxd 6/24/05 1:33 PM Page 53
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.Visit us at...
www.stanleyproto.com54
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
ITEM NO. 97118• Weight: 20 lbs.
Contents Description Contents Description
118-PIECE 1/4", 3/8" AND 1/2" DRIVE METRIC AND FRACTIONAL TOOL SET
9000H 1/4" Drive Hex Bit Holder
GW-9550 1/4" Drive Spinner
GW-9898 1/4" Drive Extension 3"
GW-9945B 1/4" Drive Round Head Reversible Ratchet
GW-1706 12 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1707 12 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1708 12 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1709 12 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1710 12 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1711 12 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1712 12 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1714 12 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1716 12 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"
GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"
GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"
GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"
GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"
GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"
GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"
GW-507M 6 Pt. Deep Metric Socket 1/4" Drive 7 mm
GW-508M 6 Pt. Deep Metric Socket 1/4" Drive 8 mm
GW-509M 6 Pt. Deep Metric Socket 1/4" Drive 9 mm
GW-510M 6 Pt. Deep Metric Socket 1/4" Drive 10 mm
GW-511M 6 Pt. Deep Metric Socket 1/4" Drive 11 mm
GW-512M 6 Pt. Deep Metric Socket 1/4" Drive 12 mm
GW-513M 6 Pt. Deep Metric Socket 1/4" Drive 13 mm
GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"
GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mm
GW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mm
GW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mm
GW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mm
GW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mm
GW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mm
GW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mm
GW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mm
GW-613M 6 Pt. Standard Metric Socket 13 mm
34945B 3/8" Drive Round Head Reversible Ratchet
34987 3/8" Drive Extension 6"
34988 3/8" Drive Extension 3"
HW-1520S 3/8" Drive Spark Plug Socket 5/8"
30412 3/8" Drive 12 Pt. Deep Inch Socket 3/8"
30414 3/8" Drive 12 Pt. Deep Inch Socket 7/16"
30416 3/8" Drive 12 Pt. Deep Inch Socket 1/2"
30418 3/8" Drive 12 Pt. Deep Inch Socket 9/16"
30422 3/8" Drive 12 Pt. Deep Inch Socket 11/16"
Sockets Sets.qxd 6/24/05 1:33 PM Page 54
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
55Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1 / 4 " , 3 / 8 " & 1 / 2 " D R I V E S O C K E T S E T S
30012 3/8" Drive 12 Pt. Standard Inch Socket 3/8"
30014 3/8" Drive 12 Pt. Standard Inch Socket 7/16"
30016 3/8" Drive 12 Pt. Standard Inch Socket 1/2"
30018 3/8" Drive 12 Pt. Standard Inch Socket 9/16"
30020 3/8" Drive 12 Pt. Standard Inch Socket 5/8"
30022 3/8" Drive 12 Pt. Standard Inch Socket 11/16"
30024 3/8" Drive 12 Pt. Standard Inch Socket 3/4"
30026 3/8" Drive 12 Pt. Standard Inch Socket 13/16"
34009M 3/8" Drive 12 Pt. Standard Metric Socket 9 mm
34010M 3/8" Drive 12 Pt. Standard Metric Socket 10 mm
34011M 3/8" Drive 12 Pt. Standard Metric Socket 11 mm
34012M 3/8" Drive 12 Pt. Standard Metric Socket 12 mm
34013M 3/8" Drive 12 Pt. Standard Metric Socket 13 mm
34014M 3/8" Drive 12 Pt. Standard Metric Socket 14 mm
34015M 3/8" Drive 12 Pt. Standard Metric Socket 15 mm
34016M 3/8" Drive 12 Pt. Standard Metric Socket 16 mm
34017M 3/8" Drive 12 Pt. Standard Metric Socket 17 mm
34018M 3/8" Drive 12 Pt. Standard Metric Socket 18 mm
34019M 3/8" Drive 12 Pt. Standard Metric Socket 19 mm
HW-1510M 3/8" Drive 6 Pt. Deep Metric Socket 10 mm
HW-1512M 3/8" Drive 6 Pt. Deep Metric Socket 12 mm
HW-1513M 3/8" Drive 6 Pt. Deep Metric Socket 13 mm
HW-1514M 3/8" Drive 6 Pt. Deep Metric Socket 14 mm
HW-1515M 3/8" Drive 6 Pt. Deep Metric Socket 15 mm
32009M 3/8" Drive 6 Pt. Standard Metric Socket 9 mm
32010M 3/8" Drive 6 Pt. Standard Metric Socket 10 mm
32011M 3/8" Drive 6 Pt. Standard Metric Socket 11 mm
32012M 3/8" Drive 6 Pt. Standard Metric Socket 12 mm
32013M 3/8" Drive 6 Pt. Standard Metric Socket 13 mm
32014M 3/8" Drive 6 Pt. Standard Metric Socket 14 mm
32015M 3/8" Drive 6 Pt. Standard Metric Socket 15 mm
32017M 3/8" Drive 6 Pt. Standard Metric Socket 17 mm
32019M 3/8" Drive 6 Pt. Standard Metric Socket 19 mm
31108 3/8" Drive 8 Pt. Standard Inch Socket 1/4"
31110 3/8" Drive 8 Pt. Standard Inch Socket 5/16"
31112 3/8" Drive 8 Pt. Standard Inch Socket 3/8"
31114 3/8" Drive 8 Pt. Standard Inch Socket 7/16"
31116 3/8" Drive 8 Pt. Standard Inch Socket 1/2"
49945B 1/2" Drive Round Head Reversible Ratchet.
49964 1/2" Drive Extension 2"
40114 1/2" Drive 12 Pt. Standard Inch Socket 7/16"
40116 1/2" Drive 12 Pt. Standard Inch Socket 1/2"
40118 1/2" Drive 12 Pt. Standard Inch Socket 9/16"
40120 1/2" Drive 12 Pt. Standard Inch Socket 5/8"
40122 1/2" Drive 12 Pt. Standard Inch Socket 11/16"
40124 1/2" Drive 12 Pt. Standard Inch Socket 3/4"
40126 1/2" Drive 12 Pt. Standard Inch Socket 13/16"
BW-1162 Combination Wrench - Satin Finish 1/2"
BW-1160 Combination Wrench- Satin Finish 3/8"
BW-1164 Combination Wrench - Satin Finish 5/8"
BW-1161 Combination Wrench- Satin Finish /16"
BW-1163 Combination Wrench- Satin Finish /16"
900-21 Insert Bit # 1 Pt. Phillips®
900-22 Insert Bit # 2 Pt. Phillips®
900-3 Insert Bit Slotted 5/32"
900-4 Insert Bit Slotted 3/16"
900-5 Insert Bit Slotted 7/32"
9000-T10 Torx® Bit T10
9000-T15 Torx® Bit T15
9000-T20 Torx® Bit T20
9000-T25 Torx® Bit T25
9000-T30 Torx® Bit T30
ITEM NO. 97118 (CONTINUED)• Weight: 20 lbs.
Contents Description Contents Description
118-PIECE 1/4", 3/8" AND 1/2" DRIVE METRIC AND FRACTIONAL TOOL SET
Sockets Sets.qxd 6/24/05 1:33 PM Page 55
Visit us at...www.stanleyproto.com56
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
GW-9550 1/4" Drive Spinner
GW-9898 1/4" Drive 3" Extension
GW-9899 1/4" Drive 6" Extension
GW-9945B 1/4" Drive Round Head Knurled Reversible Ratchet
GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"
GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mm
GW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mm
GW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mm
GW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mm
GW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mm
GW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mm
GW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mm
GW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mm
GW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mm
GW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"
GW-1507 6 Pt. Deep Inch Socket 1/4" Drive 7/32"
GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"
GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"
GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"
GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"
GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"
GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"
GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"
GW-504M 6 Pt. Deep Metric Socket 1/4" Drive 4 mm
GW-505M 6 Pt. Deep Metric Socket 1/4" Drive 5 mm
GW-506M 6 Pt. Deep Metric Socket 1/4" Drive 6 mm
GW-507M 6 Pt. Deep Metric Socket 1/4" Drive 7 mm
GW-508M 6 Pt. Deep Metric Socket 1/4" Drive 8 mm
GW-509M 6 Pt. Deep Metric Socket 1/4" Drive 9 mm
GW-510M 6 Pt. Deep Metric Socket 1/4" Drive 10 mm
GW-511M 6 Pt. Deep Metric Socket 1/4" Drive 11 mm
GW-512M 6 Pt. Deep Metric Socket 1/4" Drive 12 mm
GW-513M 6 Pt. Deep Metric Socket 1/4" Drive 13 mm
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
HW-1520S Spark Plug Socket 3/8" Drive 5/8"
HW-1526S Spark Plug Socket 3/8" Drive 13/16"
34984 3/8" Drive 11" Extension
34987 3/8" Drive 6" Extension
34988 3/8" Drive 3" Extension
30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"
30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"
30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"
30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"
30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"
30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"
30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"
30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"
34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm
34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm
34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm
34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm
34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm
34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm
34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm
34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm
34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm
34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm
34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm
30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"
30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"
30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"
30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"
30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"
30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"
30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"
30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"
HW-1510M 6 Pt. Deep Metric Socket 3/8" Drive 10 mm
HW-1512M 6 Pt. Deep Metric Socket 3/8" Drive 12 mm
HW-1513M 6 Pt. Deep Metric Socket 3/8" Drive 13 mm
HW-1514M 6 Pt. Deep Metric Socket 3/8" Drive 14 mm
HW-1515M 6 Pt. Deep Metric Socket 3/8" Drive 15 mm
HW-1517M 6 Pt. Deep Metric Socket 3/8" Drive 17 mm
HW-1519M 6 Pt. Deep Metric Socket 3/8" Drive 19 mm
31108 8 Pt. Standard Inch Socket 3/8" Drive 1/4"
31110 8 Pt. Standard Inch Socket 3/8" Drive 5/16"
31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"
31116 8 Pt. Standard Inch Socket 3/8" Drive 1/2"
31114 8 Pt. Standard Inch Socket 3/8" Drive 7/16"
49945B 1/2" Drive Round Head Knurled Reversible Ratchet
34965 1/2" Drive 1/2" x 3/8" Adapter
40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"
40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"
40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"
40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"
40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"
40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"
40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"
40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"
40132 12 Pt. Standard Inch Socket 1/2" Drive 1"
Contents Description
99 PIECE 1/4", 3/8" AND 1/2" DRIVE STANDARD AND METRIC SETITEM NO. 9796 • Weight: 18.00 lbs.
Contents Description
Contents Description
Sockets Sets.qxd 6/24/05 1:33 PM Page 56
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
57Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1 / 4 " , 3 / 8 " & 1 / 2 " D R I V E S O C K E T S E T S
GW-9945B 1/4" Drive Round Head Knurled Reversible Ratchet
GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"
GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mm
GW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mm
GW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mm
GW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"
GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"
GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"
GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"
GW-1706 12 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1707 12 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1708 12 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1709 12 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1710 12 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1711 12 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1712 12 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1714 12 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1716 12 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-707M 12 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-708M 12 Pt. Standard Metric Socket 1/4" Drive 8 mm
GW-709M 12 Pt. Standard Metric Socket 1/4" Drive 9 mm
GW-710M 12 Pt. Standard Metric Socket 1/4" Drive 10 mm
GW-711M 12 Pt. Standard Metric Socket 1/4" Drive 11 mm
GW-712M 12 Pt. Standard Metric Socket 1/4" Drive 12 mm
GW-713M 12 Pt. Standard Metric Socket 1/4" Drive 13 mm
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
34988 3/8" Drive 3" Extension
HW-1520S 3/8" Drive Spark Plug Socket 5/8"
30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"
30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"
30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"
30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"
30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"
30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"
30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"
30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"
30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"
30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"
30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"
30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"
30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"
30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"
30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"
30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"
34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm
34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm
34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm
34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm
34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm
34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm
34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm
34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm
34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm
34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm
32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm
32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm
32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm
32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm
32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm
32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm
32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm
32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm
32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm
30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"
30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"
30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"
30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"
49945B 1/2" Drive Round Head Knurled Reversible Ratchet
40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"
40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"
40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"
40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"
40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"
• Weight: 13.00 lbs.
Contents Description Contents Description Contents Description
82 PIECE 1/4", 3/8" AND 1/2" DRIVE STANDARD AND METRIC SETITEM NO. 9782-B
Sockets Sets.qxd 6/24/05 1:33 PM Page 57
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.Visit us at...
www.stanleyproto.com58
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
GW-604M 6 Pt. Socket 1/4" Drive 4 mm
GW-605M 6 Pt. Socket 1/4" Drive 5 mm
GW-606M 6 Pt. Socket 1/4" Drive 6 mm
GW-607M 6 Pt. Socket 1/4" Drive 7 mm
GW-608M 6 Pt. Socket 1/4" Drive 8 mm
GW-609M 6 Pt. Socket 1/4" Drive 9 mm
GW-610M 6 Pt. Socket 1/4" Drive 10 mm
GW-611M 6 Pt. Socket 1/4" Drive 11 mm
GW-612M 6 Pt. Socket 1/4" Drive 12 mm
GW-613M 6 Pt. Socket 1/4" Drive 13 mm
GW-1605 6 Pt. Socket 1/4" Drive 5/32"
GW-1606 6 Pt. Socket 1/4" Drive 3/16"
GW-1607 6 Pt. Socket 1/4" Drive 7/32"
GW-1608 6 Pt. Socket 1/4" Drive 1/4"
GW-1609 6 Pt. Socket 1/4" Drive 9/32"
GW-1610 6 Pt. Socket 1/4" Drive 5/16"
GW-1611 6 Pt. Socket 1/4" Drive 11/32"
GW-1612 6 Pt. Socket 1/4" Drive 3/8"
GW-1614 6 Pt. Socket 1/4" Drive 7/16"
GW-1616 6 Pt. Socket 1/4" Drive 1/2"
GW-506M 6 Pt. Deep Socket 1/4" Drive 6 mm
GW-507M 6 Pt. Deep Socket 1/4" Drive 7 mm
GW-508M 6 Pt. Deep Socket 1/4" Drive 8 mm
GW-509M 6 Pt. Deep Socket 1/4" Drive 9 mm
GW-510M 6 Pt. Deep Socket 1/4" Drive 10 mm
GW-511M 6 Pt. Deep Socket 1/4" Drive 11 mm
GW-512M 6 Pt. Deep Socket 1/4" Drive 12 mm
GW-1508 6 Pt. Deep Socket 1/4" Drive 1/4"
GW-1509 6 Pt. Deep Socket 1/4" Drive 9/32"
GW-1510 6 Pt. Deep Socket 1/4" Drive 5/16"
GW-1511 6 Pt. Deep Socket 1/4" Drive 11/32"
GW-1512 6 Pt. Deep Socket 1/4" Drive 3/8"
GW-1514 6 Pt. Deep Socket 1/4" Drive 7/16"
GW-1516 6 Pt. Deep Socket 1/4" Drive 1/2"
GW-1706 12 Pt. Socket 1/4" Drive 3/16"
GW-1707 12 Pt. Socket 1/4" Drive 7/32"
GW-1708 12 Pt. Socket 1/4" Drive 1/4"
GW-1709 12 Pt. Socket 1/4" Drive 9/32"
GW-1710 12 Pt. Socket 1/4" Drive 5/16"
GW-1711 12 Pt. Socket 1/4" Drive 11/32"
GW-1712 12 Pt. Socket 1/4" Drive 3/8"
GW-1714 12 Pt. Socket 1/4" Drive 7/16"
GW-1716 12 Pt. Socket 1/4" Drive 1/2"
GW-9945B 1/4" Drive Round Head Reversible Ratchet
GW-9898 1/4" Drive 3" Extension
GW-9550 1/4" Drive Spinner
32009M 6 Pt. Socket 3/8" Drive 9 mm
32010M 6 Pt. Socket 3/8" Drive 10 mm
32011M 6 Pt. Socket 3/8" Drive 11 mm
32012M 6 Pt. Socket 3/8" Drive 12 mm
32013M 6 Pt. Socket 3/8" Drive 13 mm
32014M 6 Pt. Socket 3/8" Drive 14 mm
32015M 6 Pt. Socket 3/8" Drive 15 mm
32017M 6 Pt. Socket 3/8" Drive 17 mm
32019M 6 Pt. Socket 3/8" Drive 19 mm
30612 6 Pt. Socket 3/8" Drive 3/8"
30614 6 Pt. Socket 3/8" Drive 7/16"
30616 6 Pt. Socket 3/8" Drive 1/2"
30618 6 Pt. Socket 3/8" Drive 9/16"
30620 6 Pt. Socket 3/8" Drive 5/8"
30622 6 Pt. Socket 3/8" Drive 11/16"
30624 6 Pt. Socket 3/8" Drive 3/4"
30626 6 Pt. Socket 3/8" Drive 13/16"
HW-1510M 6 Pt. Deep Socket 3/8" Drive 10 mm
HW-1512M 6 Pt. Deep Socket 3/8" Drive 12 mm
HW-1513M 6 Pt. Deep Socket 3/8" Drive 13 mm
HW-1514M 6 Pt. Deep Socket 3/8" Drive 14 mm
HW-1515M 6 Pt. Deep Socket 3/8" Drive 15 mm
HW-1512 6 Pt. Deep Socket 3/8" Drive 3/8"
HW-1514 6 Pt. Deep Socket 3/8" Drive 7/16"
HW-1516 6 Pt. Deep Socket 3/8" Drive 1/2"
HW-1518 6 Pt. Deep Socket 3/8" Drive 9/16"
HW-1522 6 Pt. Deep Socket 3/8" Drive 11/16"
31108 8 Pt. Socket 3/8" Drive 1/4"
31110 8 Pt. Socket 3/8" Drive 5/16"
31112 8 Pt. Socket 3/8" Drive 3/8"
31114 8 Pt. Socket 3/8" Drive 7/16"
31116 8 Pt. Socket 3/8" Drive 1/2"
34009M 12 Pt. Socket 3/8" Drive 9 mm
34010M 12 Pt. Socket 3/8" Drive 10 mm
34011M 12 Pt. Socket 3/8" Drive 11 mm
34012M 12 Pt. Socket 3/8" Drive 12 mm
34013M 12 Pt. Socket 3/8" Drive 13 mm
34014M 12 Pt. Socket 3/8" Drive 14 mm
34015M 12 Pt. Socket 3/8" Drive 15 mm
34016M 12 Pt. Socket 3/8" Drive 16 mm
34017M 12 Pt. Socket 3/8" Drive 17 mm
34018M 12 Pt. Socket 3/8" Drive 18 mm
34019M 12 Pt. Socket 3/8" Drive 19 mm
30012 12 Pt. Socket 3/8" Drive 3/8"
30014 12 Pt. Socket 3/8" Drive 7/16"
30016 12 Pt. Socket 3/8" Drive 1/2"
30018 12 Pt. Socket 3/8" Drive 9/16"
30020 12 Pt. Socket 3/8" Drive 5/8"
30022 12 Pt. Socket 3/8" Drive 11/16"
30024 12 Pt. Socket 3/8" Drive 3/4"
30026 12 Pt. Socket 3/8" Drive 13/16"
34945B 3/8" Drive Round Head Reversible Ratchet
34948B 3/8" Drive Mini Flex Ratchet
34988 3/8" Drive 3" Extension
34987 3/8" Drive 6" Extension
HW-1520S Spark Plug Socket 3/8" Drive 5/8"
34993 3/8" Drive Universal Joint
34963 3/8" Drive 3/8" to 1/4" Adapter
Contents Description Contents Description
104 PIECE 1/4" AND 3/8" DRIVE STANDARD AND METRIC SETITEM NO. 9299NB • Weight: 14.11 lbs.
Contents Description
Sockets Sets.qxd 6/24/05 1:33 PM Page 58
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
59Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1 / 4 " & 3 / 8 " D R I V E S O C K E T S E T S
Contents Description Contents Description Contents Description
75 PIECE 1/4" AND 3/8" DRIVE STANDARD AND METRIC SETITEM NO. 9775 • Weight: 10.00 lbs.
GW-9945B 1/4" Drive Round Head Knurled Reversible Ratchet
GW-9550 1/4" Drive Spinner
GW-9898 1/4" Drive 3" Extension
GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"
GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mm
GW-645M 6 Pt. Standard Metric Socket 1/4" Drive 4.5 mm
GW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mm
GW-655M 6 Pt. Standard Metric Socket 1/4" Drive 5.5 mm
GW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mm
GW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mm
GW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mm
GW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mm
GW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mm
GW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mm
GW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mm
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
34987 3/8" Drive 6" Extension
34988 3/8" Drive 3" Extension
HW-1520S 3/8" Drive Spark Plug Socket 3/8" Drive 5/8"
30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"
30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"
30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"
30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"
30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"
30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"
30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"
30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"
34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm
34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm
34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm
34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm
34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm
34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm
34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm
34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm
34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm
34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm
34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm
30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"
30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"
30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"
30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"
30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"
HW-1610M 12 Pt. Deep Metric Socket 3/8" Drive 10 mm
HW-1612M 12 Pt. Deep Metric Socket 3/8" Drive 12 mm
HW-1613M 12 Pt. Deep Metric Socket 3/8" Drive 13 mm
HW-1614M 12 Pt. Deep Metric Socket 3/8" Drive 14 mm
HW-1615M 12 Pt. Deep Metric Socket 3/8" Drive 15 mm
BW-1162 Combination Wrench - Satin Finish 1/2"
BW-1160 Combination Wrench - Satin Finish 3/8"
BW-1164 Combination Wrench - Satin Finish 5/8"
BW-1161 Combination Wrench - Satin Finish 7/16"
BW-1163 Combination Wrench - Satin Finish 9/16"
900-21 Insert Bit # 1 Pt. Phillips®
900-22 Insert Bit # 2 Pt. Phillips®
900-23 Insert Bit # 3 Pt. Phillips®
900-4 Insert Bit Slotted 3/16"
900-6 Insert Bit Slotted 1/4"
900-7 Insert Bit Slotted 9/32"
9000-T10 Insert Bit Torx® T10
9000-T15 Insert Bit Torx® T15
9000-T20 Insert Bit Torx® T20
9000-T25 Insert Bit Torx® T25
9000-T30 Insert Bit Torx® T30
9000H 1/4" Drive Hex Bit Holder
Sockets Sets.qxd 6/24/05 1:33 PM Page 59
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.Visit us at...
www.stanleyproto.com60
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
GW-9550 1/4" Drive Spinner
GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"
GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mm
GW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mm
GW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mm
GW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mm
GW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mm
GW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mm
GW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mm
GW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mm
GW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mm
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
34963 3/8" Drive 3/8" x 1/4" Adapter
34988 3/8" Drive 3" Extension
HW-1520S Spark Plug Socket 5/8"
34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm
34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm
34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm
34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm
34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm
34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm
34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm
30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"
30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"
30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"
30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"
30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"
30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"
30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"
30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"
ZW-53 13 Pc. Hex Key Wrench Set
900-21 Insert Bit # 1 Pt. Phillips®
900-22 Insert Bit # 2 Pt. Phillips®
900-23 Insert Bit # 3 Pt. Phillips®
900-4 Insert Bit Slotted 3/16"
900-6 Insert Bit Slotted 1/4"
900-7 Insert Bit Slotted 9/32"
9000-T10 Insert Bit Torx® T10
9000-T15 Insert Bit Torx® T15
9000-T20 Insert Bit Torx® T20
9000-T25 Insert Bit Torx® T25
9000-T27 Insert Bit Torx® T27
9000-H 1/4" Drive Hex Bit Holder
Contents Description Contents Description
66 PIECE 1/4" AND 3/8" DRIVE STANDARD AND METRIC SETITEM NO. 9753-B • Weight: 4.60 lbs.
Sockets Sets.qxd 6/24/05 1:33 PM Page 60
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
61Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1 / 4 " & 3 / 8 " D R I V E S O C K E T S E T S
66 PIECE 1/4" AND 3/8" DRIVE STANDARD AND METRIC SETITEM NO. 9765 • Weight: 4.60 lbs.
GW-9945B 1/4" Drive Round Head Knurled Reversible Ratchet
GW-9898 1/4" Drive 3" Extension
GW-9550 1/4" Drive Spinner
GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mm
GW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mm
GW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mm
GW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mm
GW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mm
GW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mm
GW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mm
GW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mm
GW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mm
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
34988 3/8" Drive 3" Extension
34987 3/8" Drive 6" Extension
34993 3/8" Drive Universal Joint
34963 3/8" Drive 3/8" x 1/4" Adapter
HW-1520S 3/8" Drive Spark Plug Socket 5/8"
30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"
30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"
30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"
30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"
30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"
30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"
30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"
30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"
30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"
32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm
32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm
32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm
32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm
32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm
32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm
32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm
32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm
32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm
32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm
30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"
30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"
30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"
30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"
30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"
30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"
30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"
30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"
30428 12 Pt. Deep Inch Socket 3/8" Drive 7/8"
HW-1510M 6 Pt. Deep Metric Socket 3/8" Drive 10 mm
HW-1511M 6 Pt. Deep Metric Socket 3/8" Drive 11 mm
HW-1512M 6 Pt. Deep Metric Socket 3/8" Drive 12 mm
HW-1513M 6 Pt. Deep Metric Socket 3/8" Drive 13 mm
HW-1514M 6 Pt. Deep Metric Socket 3/8" Drive 14 mm
HW-1515M 6 Pt. Deep Metric Socket 3/8" Drive 15 mm
HW-1517M 6 Pt. Deep Metric Socket 3/8" Drive 17 mm
HW-1518M 6 Pt. Deep Metric Socket 3/8" Drive 18 mm
HW-1519M 6 Pt. Deep Metric Socket 3/8" Drive 19 mm
Contents Description Contents Description
Sockets Sets.qxd 6/24/05 1:33 PM Page 61
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.Visit us at...
www.stanleyproto.com62
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
GW-9945B 1/4" Drive Round Head Knurled Reversible Ratchet
GW-604M 1/4" Drive 6 Pt. Standard Metric Socket 4 mm
GW-605M 1/4" Drive 6 Pt. Standard Metric Socket 5 mm
GW-606M 1/4" Drive 6 Pt. Standard Metric Socket 6 mm
GW-607M 1/4" Drive 6 Pt. Standard Metric Socket 7 mm
GW-609M 1/4" Drive 6 Pt. Standard Metric Socket 9 mm
GW-608M 1/4" Drive 6 Pt. Standard Metric Socket 8 mm
GW-610M 1/4" Drive 6 Pt. Standard Metric Socket 10 mm
GW-611M 1/4" Drive 6 Pt. Standard Metric Socket 11 mm
GW-612M 1/4" Drive 6 Pt. Standard Metric Socket 12 mm
GW-613M 1/4" Drive 6 Pt. Standard Metric Socket 13 mm
GW-1606 1/4" Drive 6 Pt. Standard Inch Socket 3/16"
GW-1605 1/4" Drive 6 Pt. Standard Inch Socket 5/32"
GW-1607 1/4" Drive 6 Pt. Standard Inch Socket 7/32"
GW-1608 1/4" Drive 6 Pt. Standard Inch Socket 1/4"
GW-1609 1/4" Drive 6 Pt. Standard Inch Socket 9/32"
GW-1610 1/4" Drive 6 Pt. Standard Inch Socket 5/16"
GW-1611 1/4" Drive 6 Pt. Standard Inch Socket 11/32"
GW-1612 1/4" Drive 6 Pt. Standard Inch Socket 3/8"
GW-1614 1/4" Drive 6 Pt. Standard Inch Socket 7/16"
GW-1616 1/4" Drive 6 Pt. Standard Inch Socket 1/2"
GW-1706 1/4" Drive 12 Pt. Standard Inch Socket 3/16"
GW-1707 1/4" Drive 12 Pt. Standard Inch Socket 7/32"
GW-1708 1/4" Drive 12 Pt. Standard Inch Socket 1/4"
GW-1709 1/4" Drive 12 Pt. Standard Inch Socket 9/32"
GW-1710 1/4" Drive 12 Pt. Standard Inch Socket 5/16"
GW-1711 1/4" Drive 12 Pt. Standard Inch Socket 11/32"
GW-1712 1/4" Drive 12 Pt. Standard Inch Socket 3/8"
GW-1714 1/4" Drive 12 Pt. Standard Inch Socket 7/16"
GW-1716 1/4" Drive 12 Pt. Standard Inch Socket 1/2"
GW-1508 1/4" Drive 6 Pt. Deep Inch Socket 1/4"
GW-1509 1/4" Drive 6 Pt. Deep Inch Socket 9/32"
GW-1510 1/4" Drive 6 Pt. Deep Inch Socket 5/16"
GW-1511 1/4" Drive 6 Pt. Deep Inch Socket 11/32"
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
34988 3/8" Drive 3" Extension
HW-1520S 3/8" Drive Spark Plug Socket 5/8"
30612 3/8" Drive 6 Pt. Standard Inch Socket 3/8"
30614 3/8" Drive 6 Pt. Standard Inch Socket 7/16"
30616 3/8" Drive 6 Pt. Standard Inch Socket 1/2"
30618 3/8" Drive 6 Pt. Standard Inch Socket 9/16"
30620 3/8" Drive 6 Pt. Standard Inch Socket 5/8"
30624 3/8" Drive 6 Pt. Standard Inch Socket 3/4"
30622 3/8" Drive 6 Pt. Standard Inch Socket 11/16"
30626 3/8" Drive 6 Pt. Standard Inch Socket 13/16"
32010M 3/8" Drive 6 Pt. Standard Metric Socket 10 mm
32011M 3/8" Drive 6 Pt. Standard Metric Socket 11 mm
32012M 3/8" Drive 6 Pt. Standard Metric Socket 12 mm
32013M 3/8" Drive 6 Pt. Standard Metric Socket 13 mm
32014M 3/8" Drive 6 Pt. Standard Metric Socket 14 mm
32015M 3/8" Drive 6 Pt. Standard Metric Socket 15 mm
32017M 3/8" Drive 6 Pt. Standard Metric Socket 17 mm
32019M 3/8" Drive 6 Pt. Standard Metric Socket 19 mm
30012 3/8" Drive 12 Pt. Standard Inch Socket 3/8"
30014 3/8" Drive 12 Pt. Standard Inch Socket 7/16"
30016 3/8" Drive 12 Pt. Standard Inch Socket 1/2"
30018 3/8" Drive 12 Pt. Standard Inch Socket 9/16"
30020 3/8" Drive 12 Pt. Standard Inch Socket 5/8"
30022 3/8" Drive 12 Pt. Standard Inch Socket 11/16"
30024 3/8" Drive 12 Pt. Standard Inch Socket 3/4"
HW-1512 3/8" Drive 6 Pt. Deep Inch Socket 3/8"
HW-1514 3/8" Drive 6 Pt. Deep Inch Socket 7/16"
HW-1516 3/8" Drive 6 Pt. Deep Inch Socket 1/2"
HW-1518 3/8" Drive 6 Pt. Deep Inch Socket 9/16"
Contents Description Contents Description
64 PIECE 1/4" AND 3/8" DRIVE STANDARD AND METRIC SETITEM NO. 97065• Weight: 7.10 lbs.
Sockets Sets.qxd 6/24/05 1:33 PM Page 62
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
63Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1 / 4 " & 3 / 8 " D R I V E S O C K E T S E T S
Contents Description Contents Description
53 PIECE 1/4" AND 3/8" DRIVE STANDARD AND METRIC SETITEM NO. 9753 • Weight: 7.70 lbs.
GW-9945B 1/4" Drive Round Head Knurled Reversible Ratchet
GW-9550 1/4" Drive Spinner
GW-9898 1/4" Drive 3" Extension
GW-1706 12 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1707 12 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1708 12 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1709 12 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1710 12 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1711 12 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1712 12 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1714 12 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1716 12 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mm
GW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mm
GW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mm
GW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mm
GW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mm
GW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mm
GW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mm
GW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mm
GW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mm
GW-1507 6 Pt. Deep Inch Socket 1/4" Drive 7/32"
GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"
GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"
GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"
GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
34988 3/8" Drive 3" Extension
30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"
30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"
30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"
30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"
30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"
30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"
30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"
30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"
30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"
30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"
30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"
30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"
30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"
34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm
34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm
34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm
34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm
34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm
34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm
34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm
34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm
31108 8 Pt. Standard Inch Socket 3/8" Drive 1/4"
31110 8 Pt. Standard Inch Socket 3/8" Drive 5/16"
31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"
Sockets Sets.qxd 6/24/05 1:33 PM Page 63
Visit us at...www.stanleyproto.com64
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
GW-9550 1/4" Drive Spinner
GW-9898 1/4" Drive 3" Extension
GW-9945B 1/4" Drive Round Head Knurled Reversible Ratchet
GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"
GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1707 12 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1708 12 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1709 12 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1710 12 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1711 12 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1712 12 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1714 12 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1716 12 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-707M 12 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-708M 12 Pt. Standard Metric Socket 1/4" Drive 8 mm
GW-709M 12 Pt. Standard Metric Socket 1/4" Drive 9 mm
GW-710M 12 Pt. Standard Metric Socket 1/4" Drive 10 mm
GW-711M 12 Pt. Standard Metric Socket 1/4" Drive 11 mm
GW-712M 12 Pt. Standard Metric Socket 1/4" Drive 12 mm
GW-713M 12 Pt. Standard Metric Socket 1/4" Drive 13 mm
GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mm
GW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mm
GW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mm
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
34988 3/8" Drive 3" Extension
30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"
30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"
30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"
30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"
30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"
30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"
30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"
30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"
34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm
34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm
34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm
34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm
34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm
34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm
34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm
34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm
34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm
31108 8 Pt. Standard Inch Socket 3/8" Drive 1/4"
31110 8 Pt. Standard Inch Socket 3/8" Drive 5/16"
31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"
30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"
30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"
30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"
30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"
30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"
Contents Description Contents Description
50 PIECE 1/4" AND 3/8" DRIVE STANDARD AND METRIC SETITEM NO. 9750 • Weight: 5.60 lbs.
Sockets Sets.qxd 6/24/05 1:33 PM Page 64
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
65Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1 / 4 " & 3 / 8 " D R I V E S O C K E T S E T S
GW-9945B 1/4" Drive Round Head Knurled Reversible Ratchet
GW-9550 1/4" Drive Spinner
GW-9898 1/4" Drive 3" Extension
GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"
GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mm
GW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mm
GW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mm
GW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mm
GW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mm
GW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mm
GW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mm
GW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mm
GW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mm
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
34988 3/8" Drive 3" Extension
HW-1520S 3/8" Drive Spark Plug Socket 5/8"
30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"
30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"
30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"
30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"
30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"
30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"
30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"
30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"
31108 8 Pt. Standard Inch Socket 3/8" Drive 1/4"
31110 8 Pt. Standard Inch Socket 3/8" Drive 5/16"
31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"
32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm
32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm
32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm
32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm
32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm
32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm
32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm
32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm
32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm
HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"
HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"
HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"
HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"
Contents Description Contents Description
50 PIECE 1/4" AND 3/8" DRIVE STANDARD AND METRIC SETITEM NO. 9251NB • Weight: 5.25 lbs.
Sockets Sets.qxd 6/24/05 1:33 PM Page 65
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.Visit us at...
www.stanleyproto.com66
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
34986B 3/8" Drive Flex Handle
30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"
30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"
30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"
30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"
30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"
30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"
30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"
30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"
34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm
34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm
34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm
34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm
34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm
34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm
34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm
34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm
900-21 Insert Bit # 1 Pt. Phillips®
900-22 Insert Bit # 2 Pt. Phillips®
900-23 Insert Bit # 3 Pt. Phillips®
9000-T10 Insert Bit Torx® T10
9000-T15 Insert Bit Torx® T15
9000-T20 Insert Bit Torx® T20
9000-T25 Insert Bit Torx® T25
9000-T27 Insert Bit Torx® T27
900-8 Insert Bit Slotted 5/16"
900-3 Insert Bit Slotted 5/32"
900-4 Insert Bit Slotted 3/16"
900-6 Insert Bit Slotted 1/4"
900-70 1/4" Hex Bit Holder
Contents Description Contents Description
30 PIECE 1/4" AND 3/8" DRIVE STANDARD AND METRIC SETITEM NO. 9731-B • Weight: 2.00 lbs.
Sockets Sets.qxd 6/24/05 1:33 PM Page 66
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
67Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1 / 4 " & 3 / 8 " D R I V E S O C K E T S E T S
23 PIECE 1/4" AND 3/8" DRIVE STANDARD SET• Weight: 5.30 lbs.
Item No. Contents Description
1323ANB GW-9550 1/4" Drive Spinner
GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
34987 3/8" Drive 6" Extension
34988 3/8" Drive 3" Extension
HW-1520S Spark Plug Socket 3/8" Drive 5/8"
34963 3/8" Drive 3/8" x 1/4" Adapter
30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"
30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"
30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"
30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"
30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"
30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"
30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"
30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"
27 PIECE 1/4" DRIVE STANDARD AND METRIC SET• Weight: 2.10 lbs.
Item No. Contents Description
1427 GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"
GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"
GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"
GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"
GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"
GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"
GW-1706 12 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1707 12 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1708 12 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1709 12 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1710 12 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1711 12 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1712 12 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1714 12 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1716 12 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mm
GW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mm
GW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mm
GW-707M 12 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-708M 12 Pt. Standard Metric Socket 1/4" Drive 8 mm
GW-709M 12 Pt. Standard Metric Socket 1/4" Drive 9 mm
GW-710M 12 Pt. Standard Metric Socket 1/4" Drive 10 mm
GW-711M 12 Pt. Standard Metric Socket 1/4" Drive 11 mm
GW-712M 12 Pt. Standard Metric Socket 1/4" Drive 12 mm
GW-713M 12 Pt. Standard Metric Socket 1/4" Drive 13 mm
GW-9898 1/4" Drive 3" Extension
GW-9945B 1/4" Drive Round Head Knurled Reversible Ratchet
Sockets Sets.qxd 6/24/05 1:33 PM Page 67
Visit us at...www.stanleyproto.com68
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
21 PIECE 1/4" DRIVE STANDARD SET• Weight: 2.00 lbs.
Item No. Contents Description
1421-NB GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"
GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"
GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"
GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"
GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"
GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"
GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"
GW-9550 1/4" Drive Spinner
GW-9945B 1/4" Drive Round Head Knurled Reversible Ratchet
GW-9898 1/4" Drive 3" Extension
GW-9899 1/4" Drive 6" Extension
GW-9578 1/4" Drive Universal Joint
21 PIECE 1/4" DRIVE METRIC SET• Weight: 2.00 lbs.
Item No. Contents Description
1421-MNB GW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mm
GW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mm
GW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mm
GW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mm
GW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mm
GW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mm
GW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mm
GW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mm
GW-507M 6 Pt. Deep Metric Socket 1/4" Drive 7 mm
GW-508M 6 Pt. Deep Metric Socket 1/4" Drive 8 mm
GW-509M 6 Pt. Deep Metric Socket 1/4" Drive 9 mm
GW-510M 6 Pt. Deep Metric Socket 1/4" Drive 10 mm
GW-511M 6 Pt. Deep Metric Socket 1/4" Drive 11 mm
GW-512M 6 Pt. Deep Metric Socket 1/4" Drive 12 mm
GW-513M 6 Pt. Deep Metric Socket 1/4" Drive 13 mm
GW-9945B 1/4" Drive Round Head Knurled Reversible Ratchet
GW-9898 1/4" Drive 3" Extension
GW-9899 1/4" Drive 6" Extension
GW-9578 1/4" Drive Universal Joint
GW-9550 1/4" Drive Spinner
Sockets Sets.qxd 6/24/05 1:33 PM Page 68
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
69Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1 / 4 " D R I V E S O C K E T S E T S
12 PIECE 1/4" DRIVE STANDARD SET• Weight: 1.50 lbs.
Item No. Contents Description
1412NB GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-9898 1/4" Drive 3" Extension
GW-9550 1/4" Drive Spinner
GW-9945B 1/4" Drive Round Head Knurled Reversible Ratchet
12 PIECE 1/4" DRIVE METRIC SET• Weight: 1.50 lbs.
Item No. Contents Description
1412-MNB GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mm
GW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mm
GW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mm
GW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mm
GW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mm
GW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mm
GW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mm
GW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mm
GW-9550 1/4" Drive Spinner
GW-9945B 1/4" Drive Round Head Knurled Reversible Ratchet
GW-9898 1/4" Drive 3" Extension
12 PIECE 1/4" DRIVE METRIC SOCKET SET• Weight: 0.62 lbs.
Item No. Contents Description
112-MNB GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mm
GW-645M 6 Pt. Standard Metric Socket 1/4" Drive 4.5 mm
GW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mm
GW-655M 6 Pt. Standard Metric Socket 1/4" Drive 5.5 mm
GW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mm
GW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mm
GW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mm
GW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mm
GW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mm
GW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mm
GW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mm
Clip Rail
Sockets Sets.qxd 6/24/05 1:33 PM Page 69
Visit us at...www.stanleyproto.com70
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
10 PIECE 1/4" DRIVE STANDARD SOCKET SET• Weight: 0.54 lbs.
Item No. Contents Description
110-CNB GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"
Clip Rail
10 PIECE 1/4" DRIVE STANDARD SOCKET SET• Weight: 0.50 lbs.
Item No. Contents Description
110-A GW-1705 12 Pt. Standard Inch Socket 1/4" Drive 5/32"
GW-1706 12 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1707 12 Pt. Standard Inch Socket 1/4" Drive 7/32"
GW-1708 12 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1709 12 Pt. Standard Inch Socket 1/4" Drive 9/32"
GW-1710 12 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1711 12 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1712 12 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1714 12 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1716 12 Pt. Standard Inch Socket 1/4" Drive 1/2"
Clip Rail
10 PIECE 1/4" DRIVE METRIC SOCKET SET• Weight: 0.50 lbs.
Item No. Contents Description
1412-6M GW-705M 12 Pt. Standard Metric Socket 1/4" Drive 5 mm
GW-755M 12 Pt. Standard Metric Socket 1/4" Drive 5.5 mm
GW-706M 12 Pt. Standard Metric Socket 1/4" Drive 6 mm
GW-707M 12 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-708M 12 Pt. Standard Metric Socket 1/4" Drive 8 mm
GW-709M 12 Pt. Standard Metric Socket 1/4" Drive 9 mm
GW-710M 12 Pt. Standard Metric Socket 1/4" Drive 10 mm
GW-711M 12 Pt. Standard Metric Socket 1/4" Drive 11 mm
GW-712M 12 Pt. Standard Metric Socket 1/4" Drive 12 mm
GW-713M 12 Pt. Standard Metric Socket 1/4" Drive 13 mm
Clip Rail
Sockets Sets.qxd 6/24/05 1:33 PM Page 70
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
71Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1 / 4 " D R I V E S O C K E T S E T S
10 PIECE 1/4" DRIVE METRIC DEEP SOCKET SET• Weight: 1.00 lbs.
Item No. Contents Description
110-CM GW-504M 6 Pt. Deep Metric Socket 1/4" Drive 4 mm
GW-505M 6 Pt. Deep Metric Socket 1/4" Drive 5 mm
GW-506M 6 Pt. Deep Metric Socket 1/4" Drive 6 mm
GW-507M 6 Pt. Deep Metric Socket 1/4" Drive 7 mm
GW-508M 6 Pt. Deep Metric Socket 1/4" Drive 8 mm
GW-509M 6 Pt. Deep Metric Socket 1/4" Drive 9 mm
GW-510M 6 Pt. Deep Metric Socket 1/4" Drive 10 mm
GW-511M 6 Pt. Deep Metric Socket 1/4" Drive 11 mm
GW-512M 6 Pt. Deep Metric Socket 1/4" Drive 12 mm
GW-513M 6 Pt. Deep Metric Socket 1/4" Drive 13 mm
Clip Rail
9 PIECE 1/4" DRIVE METRIC DEEP SOCKET SET• Weight: 1.00 lbs.
Item No. Contents Description
110-AM GW-1605M 12 Pt. Deep Metric Socket 1/4" Drive 5 mm
GW-1606M 12 Pt. Deep Metric Socket 1/4" Drive 6 mm
GW-1607M 12 Pt. Deep Metric Socket 1/4" Drive 7 mm
GW-1608M 12 Pt. Deep Metric Socket 1/4" Drive 8 mm
GW-1609M 12 Pt. Deep Metric Socket 1/4" Drive 9 mm
GW-1610M 12 Pt. Deep Metric Socket 1/4" Drive 10 mm
GW-1611M 12 Pt. Deep Metric Socket 1/4" Drive 11 mm
GW-1612M 12 Pt. Deep Metric Socket 1/4" Drive 12 mm
GW-1613M 12 Pt. Deep Metric Socket 1/4" Drive 13 mm
Clip Rail
7 PIECE 1/4" DRIVE STANDARD DEEP SOCKET SET• Weight: 0.58 lbs.
Item No. Contents Description
107-CNB GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"
GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"
GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"
GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"
GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"
GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"
GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"
Clip Rail
7 PIECE 1/4" DRIVE STANDARD DEEP SOCKET SET• Weight: 0.70 lbs.
Item No. Contents Description
107-A GW-1408 12 Pt. Deep Inch Socket 1/4" Drive 1/4"
GW-1409 12 Pt. Deep Inch Socket 1/4" Drive 9/32"
GW-1410 12 Pt. Deep Inch Socket 1/4" Drive 5/16"
GW-1411 12 Pt. Deep Inch Socket 1/4" Drive 11/32"
GW-1412 12 Pt. Deep Inch Socket 1/4" Drive 3/8"
GW-1414 12 Pt. Deep Inch Socket 1/4" Drive 7/16"
GW-1416 12 Pt. Deep Inch Socket 1/4" Drive 1/2"
Clip Rail
Sockets Sets.qxd 6/24/05 1:33 PM Page 71
Visit us at...www.stanleyproto.com72
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"
30010A 12 Pt. Standard Inch Socket 3/8" Drive 5/16"
30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"
30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"
30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"
30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"
30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"
30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"
30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"
30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"
34008M 12 Pt. Standard Metric Socket 3/8" Drive 8 mm
34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm
34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm
34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm
34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm
34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm
34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm
34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm
34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm
34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm
34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm
30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"
30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"
30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"
30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"
30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"
30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"
30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"
30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"
30428 12 Pt. Deep Inch Socket 3/8" Drive 7/8"
34988 3/8" Drive 3" Extension
34987 3/8" Drive 6" Extension
34993 3/8" Drive Universal Joint
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
Contents Description Contents Description
34 PIECE 3/8" DRIVE STANDARD AND METRIC SETITEM NO. 9934 • Weight: 8.20 lbs.
Sockets Sets.qxd 6/24/05 1:33 PM Page 72
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
73Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
3 / 8 " D R I V E S O C K E T S E T S
30608 6 Pt. Standard Inch Socket 3/8" Drive 1/4"
30010 6 Pt. Standard Inch Socket 3/8" Drive 5/16"
30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"
30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"
30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"
30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"
30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"
30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"
30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"
30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"
32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm
32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm
32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm
32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm
32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm
32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm
32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm
32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm
32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm
32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm
HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"
HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"
HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"
HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"
HW-1510M 6 Pt. Deep Metric Socket 3/8" Drive 10 mm
HW-1511M 6 Pt. Deep Metric Socket 3/8" Drive 11 mm
HW-1512M 6 Pt. Deep Metric Socket 3/8" Drive 12 mm
HW-1514M 6 Pt. Deep Metric Socket 3/8" Drive 14 mm
34950X 3/8" Drive Indexible Head Ratchet
34987 3/8" Drive 6" Extension
Contents Description Contents Description
30 PIECE 3/8" DRIVE STANDARD AND METRIC INDEXIBLE SETITEM NO. 9930X • Weight: 8.10 lbs.
Sockets Sets.qxd 6/24/05 1:33 PM Page 73
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
75Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
3 / 8 " D R I V E S O C K E T S E T S
24 PIECE 3/8" DRIVE METRIC SOCKET SET• Weight: 3.34 lbs.
Item No. Contents Description
8924MNB 32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm
32008M 6 Pt. Standard Metric Socket 3/8" Drive 8 mm
32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm
32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm
32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm
32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm
32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm
32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm
32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm
32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm
32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm
32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm
32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm
32020M 6 Pt. Standard Metric Socket 3/8" Drive 20 mm
32021M 6 Pt. Standard Metric Socket 3/8" Drive 21 mm
32022M 6 Pt. Standard Metric Socket 3/8" Drive 22 mm
HW-1510M 6 Pt. Deep Metric Socket 3/8" Drive 10 mm
HW-1511M 6 Pt. Deep Metric Socket 3/8" Drive 11 mm
HW-1512M 6 Pt. Deep Metric Socket 3/8" Drive 12 mm
HW-1513M 6 Pt. Deep Metric Socket 3/8" Drive 13 mm
HW-1514M 6 Pt. Deep Metric Socket 3/8" Drive 14 mm
HW-1515M 6 Pt. Deep Metric Socket 3/8" Drive 15 mm
HW-1517M 6 Pt. Deep Metric Socket 3/8" Drive 17 mm
HW-1519M 6 Pt. Deep Metric Socket 3/8" Drive 19 mm
24 PIECE 3/8" DRIVE METRIC SET• Weight: 0.75 lbs.
Item No. Contents Description
3824-MNB HW-1510M 6 Pt. Deep Metric Socket 3/8" Drive 10 mm
HW-1511M 6 Pt. Deep Metric Socket 3/8" Drive 11 mm
HW-1512M 6 Pt. Deep Metric Socket 3/8" Drive 12 mm
HW-1513M 6 Pt. Deep Metric Socket 3/8" Drive 13 mm
HW-1514M 6 Pt. Deep Metric Socket 3/8" Drive 14 mm
HW-1515M 6 Pt. Deep Metric Socket 3/8" Drive 15 mm
HW-1517M 6 Pt. Deep Metric Socket 3/8" Drive 17 mm
HW-1519M 6 Pt. Deep Metric Socket 3/8" Drive 19 mm
32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm
32008M 6 Pt. Standard Metric Socket 3/8" Drive 8 mm
32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm
32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm
32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm
32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm
32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm
32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm
32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm
32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm
32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm
32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm
32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm
34988 3/8" Drive 3" Extension
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
HW-1520S Spark Plug Socket 3/8" Drive 5/8"
Sockets Sets.qxd 6/24/05 1:33 PM Page 75
Visit us at...www.stanleyproto.com76
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
21 PIECE 3/8" DRIVE STANDARD SOCKET SET• Weight: 3.85 lbs.
Item No. Contents Description
8921NB 30010 6 Pt. Standard Inch Socket 3/8" Drive 5/16"
30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"
30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"
30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"
30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"
30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"
30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"
30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"
30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"
30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"
30630 6 Pt. Standard Inch Socket 3/8" Drive 15/16"
30632 6 Pt. Standard Inch Socket 3/8" Drive 1"
HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"
HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"
HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"
HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"
HW-1520 6 Pt. Deep Inch Socket 3/8" Drive 5/8"
HW-1522 6 Pt. Deep Inch Socket 3/8" Drive 11/16"
HW-1524 6 Pt. Deep Inch Socket 3/8" Drive 3/4"
HW-1526 6 Pt. Deep Inch Socket 3/8" Drive 13/16"
HW-1528 6 Pt. Deep Inch Socket 3/8" Drive 7/8"
20 PIECE 3/8" DRIVE STANDARD SET• Weight: 5.50 lbs.
Item No. Contents Description
3820NB 30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"
30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"
30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"
30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"
30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"
30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"
30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"
30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"
30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"
HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"
HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"
HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"
HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"
HW-1520 6 Pt. Deep Inch Socket 3/8" Drive 5/8"
HW-1522 6 Pt. Deep Inch Socket 3/8" Drive 11/16"
HW-1524 6 Pt. Deep Inch Socket 3/8" Drive 3/4"
HW-1526 6 Pt. Deep Inch Socket 3/8" Drive 13/16"
34987 3/8" Drive 6" Extension
34988 3/8" Drive 3" Extension
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
Sockets Sets.qxd 6/24/05 1:33 PM Page 76
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
77Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
3 / 8 " D R I V E S O C K E T S E T S
20 PIECE 3/8" DRIVE STANDARD SET• Weight: 5.50 lbs.
Item No. Contents Description
3820-S 30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"
30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"
30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"
30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"
30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"
30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"
30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"
30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"
30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"
30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"
30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"
30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"
30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"
30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"
30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"
30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"
30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
34988 3/8" Drive 3" Extension
34987 3/8" Drive 6" Extension
19 PIECE 3/8" DRIVE STANDARD SET• Weight: 4.30 lbs.
Item No. Contents Description
3819-DS 30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"
30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"
30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"
30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"
30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"
30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"
30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"
30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"
30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"
HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"
HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"
HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"
HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"
HW-1522 6 Pt. Deep Inch Socket 3/8" Drive 11/16"
HW-1524 6 Pt. Deep Inch Socket 3/8" Drive 3/4"
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
34988 3/8" Drive 3" Extension
34987 3/8" Drive 6" Extension
HW-1520S 3/8" Drive Spark Plug Socket 5/8"
Sockets Sets.qxd 6/24/05 1:33 PM Page 77
Visit us at...www.stanleyproto.com78
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
18 PIECE 3/8" DRIVE METRIC SET• Weight: 3.40 lbs.
Item No. Contents Description
3818-M 32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm
32008M 6 Pt. Standard Metric Socket 3/8" Drive 8 mm
32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm
32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm
32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm
32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm
32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm
32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm
32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm
32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm
32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm
32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm
32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm
34987 3/8" Drive 6" Extension
34988 3/8" Drive 3" Extension
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
34986B 3/8" Drive Flex Handle
HW-1520S 3/8" Drive Spark Plug Socket 5/8"
16 PIECE 3/8" DRIVE STANDARD AND METRIC SET• Weight: 9.60 lbs.
Item No. Contents Description
3816-MS 30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"
30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"
30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"
30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"
30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"
30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"
30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"
32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm
32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm
32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm
32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm
32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm
32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm
32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm
34988 3/8" Drive 3" Extension
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
Sockets Sets.qxd 6/24/05 1:33 PM Page 78
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
79Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
3 / 8 " D R I V E S O C K E T S E T S
14 PIECE 3/8" DRIVE STANDARD SET• Weight: 1.10 lbs.
Item No. Contents Description
3814ANB 30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"
30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"
30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"
30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"
30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"
30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"
30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"
30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"
30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"
HW-1520S 3/8" Drive Spark Plug Socket 5/8"
34988 3/8" Drive 3" Extension
34987 3/8" Drive 6" Extension
34986B 3/8" Drive Flex Handle
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
13 PIECE 3/8" DRIVE METRIC SET• Weight: 1.00 lbs.
Item No. Contents Description
213-BNB 32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm
32008M 6 Pt. Standard Metric Socket 3/8" Drive 8 mm
32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm
32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm
32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm
32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm
32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm
32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm
32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm
32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm
32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm
32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm
32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm
Clip Rail
12 PIECE 3/8" DRIVE METRIC SOCKET SET• Weight: 0.95 lbs.
Item No. Contents Description
3812-M 34008M 12 Pt. Standard Metric Socket 3/8" Drive 8 mm
34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm
34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm
34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm
34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm
34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm
34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm
34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm
34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm
34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm
34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm
34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm
Clip Rail
Sockets Sets.qxd 6/24/05 1:33 PM Page 79
Visit us at...www.stanleyproto.com74
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
34008M 12 Pt. Standard Metric Socket 3/8" Drive 8 mm
34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm
34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm
34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm
34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm
34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm
34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm
34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm
34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm
34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm
34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm
34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm
HW-1608M 12 Pt. Deep Metric Socket 3/8" Drive 8 mm
HW-1609M 12 Pt. Deep Metric Socket 3/8" Drive 9 mm
HW-1610M 12 Pt. Deep Metric Socket 3/8" Drive 10 mm
HW-1611M 12 Pt. Deep Metric Socket 3/8" Drive 11 mm
HW-1612M 12 Pt. Deep Metric Socket 3/8" Drive 12 mm
HW-1613M 12 Pt. Deep Metric Socket 3/8" Drive 13 mm
HW-1614M 12 Pt. Deep Metric Socket 3/8" Drive 14 mm
HW-1615M 12 Pt. Deep Metric Socket 3/8" Drive 15 mm
HW-1616M 12 Pt. Deep Metric Socket 3/8" Drive 16 mm
HW-1617M 12 Pt. Deep Metric Socket 3/8" Drive 17 mm
HW-1618M 12 Pt. Deep Metric Socket 3/8" Drive 18 mm
HW-1619M 12 Pt. Deep Metric Socket 3/8" Drive 19 mm
34987 3/8" Drive 6" Extension
34988 3/8" Drive 3" Extension
34993 3/8" Drive Universal Joint
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
34986B 3/8" Drive Flex Handle
Contents Description Contents Description
29 PIECE 3/8" DRIVE METRIC SETITEM NO. 3829-M • Weight: 8.1 lbs.
Sockets Sets.qxd 6/24/05 1:33 PM Page 74
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.Visit us at...
www.stanleyproto.com80
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
11 PIECE 3/8" DRIVE STANDARD SET• Weight: 1.30 lbs.
Item No. Contents Description
3811NB 30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"
30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"
30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"
30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"
30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"
30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"
30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"
30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"
30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"
34988 3/8" Drive 3" Extension
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
11 PIECE 3/8" DRIVE METRIC SET• Weight: 1.30 lbs.
Item No. Contents Description
3811-MNB 32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm
32008M 6 Pt. Standard Metric Socket 3/8" Drive 8 mm
32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm
32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm
32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm
32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm
32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm
32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm
32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm
34988 3/8" Drive 3" Extension
34945B 3/8" Drive Round Head Knurled Reversible Ratchet
10 PIECE 3/8" DRIVE METRIC IMPACT SOCKET SET• Weight: 1.20 lbs.
Item No. Contents Description
3810-M U-1508M 6 Pt. Standard Metric Impact Socket 3/8" Drive 8 mm
U-1509M 6 Pt. Standard Metric Impact Socket 3/8" Drive 9 mm
U-1510M 6 Pt. Standard Metric Impact Socket 3/8" Drive 10 mm
U-1512M 6 Pt. Standard Metric Impact Socket 3/8" Drive 12 mm
U-1513M 6 Pt. Standard Metric Impact Socket 3/8" Drive 13 mm
U-1514M 6 Pt. Standard Metric Impact Socket 3/8" Drive 14 mm
U-1515M 6 Pt. Standard Metric Impact Socket 3/8" Drive 15 mm
U-1517M 6 Pt. Standard Metric Impact Socket 3/8" Drive 17 mm
U-1518M 6 Pt. Standard Metric Impact Socket 3/8" Drive 18 mm
U-1519M 6 Pt. Standard Metric Impact Socket 3/8" Drive 19 mm
Clip Rail
Sockets Sets.qxd 6/24/05 1:33 PM Page 80
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
81Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
3 / 8 " D R I V E S O C K E T S E T S
10 PIECE 3/8" DRIVE METRIC DEEP IMPACT SOCKET SET• Weight: 1.20 lbs.
Item No. Contents Description
3810 U-1608M 6 Pt. Deep Metric Impact Socket 3/8" Drive 8 mm
U-1609M 6 Pt. Deep Metric Impact Socket 3/8" Drive 9 mm
U-1610M 6 Pt. Deep Metric Impact Socket 3/8" Drive 10 mm
U-1612M 6 Pt. Deep Metric Impact Socket 3/8" Drive 12 mm
U-1613M 6 Pt. Deep Metric Impact Socket 3/8" Drive 13 mm
U-1614M 6 Pt. Deep Metric Impact Socket 3/8" Drive 14 mm
U-1615M 6 Pt. Deep Metric Impact Socket 3/8" Drive 15 mm
U-1617M 6 Pt. Deep Metric Impact Socket 3/8" Drive 17 mm
U-1618M 6 Pt. Deep Metric Impact Socket 3/8" Drive 18 mm
U-1619M 6 Pt. Deep Metric Impact Socket 3/8" Drive 19 mm
Clip Rail
10 PIECE 3/8" DRIVE CROWFOOT SET• Weight: 1.27 lbs.• Satin finish.
Item No. Contents Size
BCF-50NB BCF-12 3/8"BCF-14 7/16"BCF-16 1/2"BCF-18 9/16"BCF-20 5/8"BCF-22 11/16"BCF-24 3/4"BCF-26 13/16"BCF-28 7/8"BCF-32 1"Clip Rail
10 PIECE 3/8" DRIVE CROWFOOT SET – METRIC• Weight: 1.11 lbs.• Satin finish.
Item No. Contents Size
BCF-50MNB BCF-10M 10 mmBCF-11M 11 mmBCF-12M 12 mmBCF-13M 13 mmBCF-14M 14 mmBCF-15M 15 mmBCF-17M 17 mmBCF-19M 19 mmBCF-21M 21 mmBCF-22M 22 mmClip Rail
9 PIECE 3/8" DRIVE STANDARD SOCKET SET• Weight: 1.20 lbs.
Item No. Contents Description
3809-6 30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"
30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"
30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"
30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"
30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"
30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"
30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"
30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"
30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"
Clip Rail
Sockets Sets.qxd 6/24/05 1:33 PM Page 81
Visit us at...www.stanleyproto.com82
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
9 PIECE 3/8" DRIVE STANDARD SOCKET SET• Weight: 1.20 lbs.
Item No. Contents Description
3809-B 30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"
30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"
30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"
30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"
30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"
30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"
30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"
30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"
30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"
Clip Rail
9 PIECE 3/8" DRIVE STANDARD DEEP SOCKET SET• Weight: 1.70 lbs.
Item No. Contents Description
3809-DS HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"
HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"
HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"
HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"
HW-1520 6 Pt. Deep Inch Socket 3/8" Drive 5/8"
HW-1522 6 Pt. Deep Inch Socket 3/8" Drive 11/16"
HW-1524 6 Pt. Deep Inch Socket 3/8" Drive 3/4"
HW-1526 6 Pt. Deep Inch Socket 3/8" Drive 13/16"
HW-1528 6 Pt. Deep Inch Socket 3/8" Drive 7/8"
Clip Rail
9 PIECE 3/8" DRIVE STANDARD DEEP SOCKET SET• Weight: 1.70 lbs.
Item No. Contents Description
3809-D6 30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"
30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"
30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"
30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"
30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"
30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"
30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"
30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"
30428 12 Pt. Deep Inch Socket 3/8" Drive 7/8"
Clip Rail
8 PIECE 3/8" DRIVE STANDARD SOCKET SET• Weight: 1.10 lbs.
Item No. Contents Description
208-M 30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"
30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"
30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"
30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"
30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"
30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"
30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"
30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"
Clip Rail
Sockets Sets.qxd 6/24/05 1:33 PM Page 82
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
83Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
3 / 8 " D R I V E S O C K E T S E T S
8 PIECE 3/8" DRIVE STANDARD DEEP SOCKET SET• Weight: 1.50 lbs.
Item No. Contents Description
209-CNB HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"
HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"
HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"
HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"
HW-1520 6 Pt. Deep Inch Socket 3/8" Drive 5/8"
HW-1522 6 Pt. Deep Inch Socket 3/8" Drive 11/16"
HW-1524 6 Pt. Deep Inch Socket 3/8" Drive 3/4"
HW-1526 6 Pt. Deep Inch Socket 3/8" Drive 13/16"
Clip Rail
8 PIECE 3/8" DRIVE METRIC DEEP SOCKET SET• Weight: 1.60 lbs.
Item No. Contents Description
206-CNB HW-1510M 6 Pt. Deep Metric Socket 3/8" Drive 10 mm
HW-1511M 6 Pt. Deep Metric Socket 3/8" Drive 11 mm
HW-1512M 6 Pt. Deep Metric Socket 3/8" Drive 12 mm
HW-1513M 6 Pt. Deep Metric Socket 3/8" Drive 13 mm
HW-1514M 6 Pt. Deep Metric Socket 3/8" Drive 14 mm
HW-1515M 6 Pt. Deep Metric Socket 3/8" Drive 15 mm
HW-1517M 6 Pt. Deep Metric Socket 3/8" Drive 17 mm
HW-1519M 6 Pt. Deep Metric Socket 3/8" Drive 19 mm
Clip Rail
8 PIECE 3/8" DRIVE METRIC DEEP SOCKET SET• Weight: 1.60 lbs.
Item No. Contents Description
202-C HW-1610M 12 Pt. Deep Metric Socket 3/8" Drive 10 mm
HW-1611M 12 Pt. Deep Metric Socket 3/8" Drive 11 mm
HW-1612M 12 Pt. Deep Metric Socket 3/8" Drive 12 mm
HW-1613M 12 Pt. Deep Metric Socket 3/8" Drive 13 mm
HW-1614M 12 Pt. Deep Metric Socket 3/8" Drive 14 mm
HW-1615M 12 Pt. Deep Metric Socket 3/8" Drive 15 mm
HW-1617M 12 Pt. Deep Metric Socket 3/8" Drive 17 mm
HW-1619M 12 Pt. Deep Metric Socket 3/8" Drive 19 mm
Clip Rail
5 PIECE 3/8" DRIVE STANDARD SOCKET SET• Weight: 0.58 lbs.
Item No. Contents Description
218-BNB 31108 8 Pt. Standard Inch Socket 3/8" Drive 1/4"
31110 8 Pt. Standard Inch Socket 3/8" Drive 5/16"
31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"
31114 8 Pt. Standard Inch Socket 3/8" Drive 7/16"
31116 8 Pt. Standard Inch Socket 3/8" Drive 1/2"
Clip Rail
Sockets Sets.qxd 6/24/05 1:33 PM Page 83
Visit us at...www.stanleyproto.com84
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
8 PIECE 3/8" DRIVE IMPACT SOCKET SET• Weight: 0.90 lbs.
Item No. Contents Size
U-1500 U-1508 1/4" .
U-1510 5/16"
U-1512 3/8"
U-1514 7/16"
U-1516 1/2"
U-1518 9/16"
U-1520 5/8"
U-1522 11/16"
Clip Rail
8 PIECE 3/8" DRIVE METRIC IMPACT SOCKET SET• Weight: 1.10 lbs.
Item No. Contents Size
U-1501M U-1510M 10 mm
U-1512M 12 mm
U-1513M 13 mm
U-1514M 14 mm
U-1515M 15 mm
U-1517M 17 mm
U-1518M 18 mm
U-1519M 19 mm
Clip Rail
7 PIECE 3/8" DRIVE STANDARD UNIVERSAL SOCKET SET• Weight: 1.20 lbs.
Item No. Contents Description
208-CNB 30212 6 Pt. Universal Inch Socket 3/8" Drive 3/8"
30214 6 Pt. Universal Inch Socket 3/8" Drive 7/16"
30216 6 Pt. Universal Inch Socket 3/8" Drive 1/2"
30218 6 Pt. Universal Inch Socket 3/8" Drive 9/16"
30220 6 Pt. Universal Inch Socket 3/8" Drive 5/8"
30222 6 Pt. Universal Inch Socket 3/8" Drive 11/16"
30224 6 Pt. Universal Inch Socket 3/8" Drive 3/4"
Clip Rail
Sockets Sets.qxd 6/24/05 1:33 PM Page 84
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
85Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
3 / 8 " D R I V E S O C K E T S E T S
7 PIECE 3/8" DRIVE METRIC UNIVERSAL SOCKET SET• Weight: 1.20 lbs.
Item No. Contents Description
207-M 30209M 6 Pt. Universal Metric Socket 3/8" Drive 9 mm
30210M 6 Pt. Universal Metric Socket 3/8" Drive 10 mm
30211M 6 Pt. Universal Metric Socket 3/8" Drive 11 mm
30212M 6 Pt. Universal Metric Socket 3/8" Drive 12 mm
30213M 6 Pt. Universal Metric Socket 3/8" Drive 13 mm
30214M 6 Pt. Universal Metric Socket 3/8" Drive 14 mm
30215M 6 Pt. Universal Metric Socket 3/8" Drive 15 mm
Clip Rail
13 PIECE 3/8" DRIVE STANDARD INDEXIBLE SET• Weight: 2.50 lbs.
Item No. Contents Description
9913X 30010 6 Pt. Standard Inch Socket 3/8" Drive 5/16"
30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"
30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"
30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"
30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"
30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"
30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"
30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"
30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"
30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"
30630 6 Pt. Standard Inch Socket 3/8" Drive 15/16"
34950X 3/8" Drive Indexible Head Ratchet
34988 3/8" Drive 3" Extension
13 PIECE 3/8" DRIVE METRIC INDEXIBLE SET• Weight: 2.50 lbs.
Item No. Contents Description
9913XM 32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm
32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm
32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm
32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm
32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm
32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm
32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm
32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm
32020M 6 Pt. Standard Metric Socket 3/8" Drive 20 mm
32021M 6 Pt. Standard Metric Socket 3/8" Drive 21 mm
32022M 6 Pt. Standard Metric Socket 3/8" Drive 22 mm
34950X 3/8" Drive Indexible Head Ratchet
34988 3/8" Drive 3" Extension
Sockets Sets.qxd 6/24/05 1:33 PM Page 85
Visit us at...www.stanleyproto.com86
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
13 PIECE 3/8" DRIVE STANDARD AND METRIC HEX BIT SOCKET SET• Weight: 1.50 lbs.
Item No. Contents Description
237-MB HW-9404M Hex Bit Metric Socket 3/8" Drive 4 mm
HW-9405M Hex Bit Metric Socket 3/8" Drive 5 mm
HW-9406M Hex Bit Metric Socket 3/8" Drive 6 mm
HW-9407M Hex Bit Metric Socket 3/8" Drive 7 mm
HW-9408M Hex Bit Metric Socket 3/8" Drive 8 mm
HW-9410M Hex Bit Metric Socket 3/8" Drive 10 mm
HW-9442 Hex Bit Inch Socket 3/8" Drive 1/8"
HW-9444 Hex Bit Inch Socket 3/8" Drive 5/32"
HW-9449 Hex Bit Inch Socket 3/8" Drive 3/16"
HW-9448 Hex Bit Inch Socket 3/8" Drive 7/32"
HW-9447 Hex Bit Inch Socket 3/8" Drive 1/4"
HW-9446 Hex Bit Inch Socket 3/8" Drive 5/16"
HW-9445 Hex Bit Inch Socket 3/8" Drive 3/8"
Clip Rail
8 PIECE 3/8" DRIVE STANDARD AND METRIC HEX BIT SET• Weight: 1.50 lbs.
Item No. Contents Description
238-MB HW-9449 Hex Bit Inch Socket 3/8" Drive 3/16"
HW-9447 Hex Bit Inch Socket 3/8" Drive 1/4"
HW-9446 Hex Bit Inch Socket 3/8" Drive 5/16"
HW-9445 Hex Bit Inch Socket 3/8" Drive 3/8"
HW-9405M Hex Bit Metric Socket 3/8" Drive 5 mm
HW-9406M Hex Bit Metric Socket 3/8" Drive 6 mm
HW-9408M Hex Bit Metric Socket 3/8" Drive 8 mm
HW-9410M Hex Bit Metric Socket 3/8" Drive 10 mm
Clip Rail
8 PIECE 3/8" DRIVE STANDARD HEX BIT SOCKET SET• Weight: 1.02 lbs.
Item No. Contents Size
237-B HW-9442 Hex Bit Inch Socket 3/8" Drive 1/8"
HW-9443 Hex Bit Inch Socket 3/8" Drive 9/64"
HW-9444 Hex Bit Inch Socket 3/8" Drive 5/32"
HW-9449 Hex Bit Inch Socket 3/8" Drive 3/16"
HW-9448 Hex Bit Inch Socket 3/8" Drive 7/32"
HW-9447 Hex Bit Inch Socket 3/8" Drive 1/4"
HW-9446 Hex Bit Inch Socket 3/8" Drive 5/16"
HW-9445 Hex Bit Inch Socket 3/8" Drive 3/8"
Clip Rail
5 PIECE 3/8" DRIVE STANDARD HEX BIT SOCKET SET• Weight: 0.80 lbs.
Item No. Contents Description
235-M HW-9447 Hex Bit Inch Socket 3/8" Drive 1/4"
HW-9446 Hex Bit Inch Socket 3/8" Drive 5/16"
HW-9445 Hex Bit Inch Socket 3/8" Drive 3/8"
HW-9448 Hex Bit Inch Socket 3/8" Drive 7/32"
HW-9449 Hex Bit Inch Socket 3/8" Drive 3/16"
Clip Rail
Sockets Sets.qxd 6/24/05 1:33 PM Page 86
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
87Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
3 / 8 " & 1 / 2 " D R I V E S O C K E T S E T S
6 PIECE 3/8" DRIVE METRIC HEX BIT SOCKET SET• Weight: 0.82 lbs.
Item No. Contents Size
237-MNB HW-9404M 4 mm
HW-9405M 5 mm
HW-9406M 6 mm
HW-9407M 7 mm
HW-9408M 8 mm
HW-9410M 10 mm
Clip Rail
3 PIECE 3/8" DRIVE SOCKET ADAPTER SET• Weight: 0.82 lbs.
Item No. Contents
AS3 1/4" to 3/8" Socket Adapter
3/8" to 1/2" Socket Adapter
1/2" to 3/4" Socket Adapter
26 PIECE 1/2" DRIVE STANDARD SET• Weight: 14.00 lbs.
Item No. Contents Description
1226-S 40614 6 Pt. Standard Inch Socket 1/2" Drive 7/16"
40616 6 Pt. Standard Inch Socket 1/2" Drive 1/2"
40618 6 Pt. Standard Inch Socket 1/2" Drive 9/16"
40620 6 Pt. Standard Inch Socket 1/2" Drive 5/8"
40622 6 Pt. Standard Inch Socket 1/2" Drive 11/16"
40624 6 Pt. Standard Inch Socket 1/2" Drive 3/4"
40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"
40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"
40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"
40132 12 Pt. Standard Inch Socket 1/2" Drive 1"
40134 12 Pt. Standard Inch Socket 1/2" Drive 1-1/16"
40136 12 Pt. Standard Inch Socket 1/2" Drive 1-1/8"
40140 12 Pt. Standard Inch Socket 1/2" Drive 1-1/4"
40316 12 Pt. Deep Inch Socket 1/2" Drive 1/2"
40318 12 Pt. Deep Inch Socket 1/2" Drive 9/16"
40320 12 Pt. Deep Inch Socket 1/2" Drive 5/8"
40322 12 Pt. Deep Inch Socket 1/2" Drive 11/16"
40324 12 Pt. Deep Inch Socket 1/2" Drive 3/4"
40326 12 Pt. Deep Inch Socket 1/2" Drive 13/16"
40328 12 Pt. Deep Inch Socket 1/2" Drive 7/8"
40330 12 Pt. Deep Inch Socket 1/2" Drive 15/16"
40332 12 Pt. Deep Inch Socket 1/2" Drive 1"
49945B 1/2" Drive Round Head Knurled Reversible Ratchet
49966 1/2" Drive 5" Extension
49964 1/2" Drive 2" Extension
49988B 1/2" Drive Flex Handle Ratchet
Sockets Sets.qxd 6/24/05 1:33 PM Page 87
Visit us at...www.stanleyproto.com88
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
26 PIECE 1/2" DRIVE STANDARD SET• Weight: 14.00 lbs.
Item No. Contents Description
1226-NB 40416 6 Pt. Deep Socket 1/2" Drive 1/2"
40418 6 Pt. Deep Socket 1/2" Drive 9/16"
40420 6 Pt. Deep Socket 1/2" Drive 5/8"
40422 6 Pt. Deep Socket 1/2" Drive 11/16"
40424 6 Pt. Deep Socket 1/2" Drive 3/4"
40426 6 Pt. Deep Socket 1/2" Drive 13/16"
40428 6 Pt. Deep Socket 1/2" Drive 7/8"
40430 6 Pt. Deep Socket 1/2" Drive 15/16"
40432 6 Pt. Deep Socket 1/2" Drive 1"
40614 6 Pt. Socket 1/2" Drive 7/16"
40616 6 Pt. Socket 1/2" Drive 1/2"
40618 6 Pt. Socket 1/2" Drive 9/16"
40620 6 Pt. Socket 1/2" Drive 5/8"
40622 6 Pt. Socket 1/2" Drive 11/16"
40624 6 Pt. Socket 1/2" Drive 3/4"
40626 6 Pt. Socket 1/2" Drive 13/16"
40628 6 Pt. Socket 1/2" Drive 7/8"
40630 6 Pt. Socket 1/2" Drive 15/16"
40632 6 Pt. Socket 1/2" Drive 1"
40634 6 Pt. Socket 1/2" Drive 1-1/16"
40636 6 Pt. Socket 1/2" Drive 1-1/8"
40640 6 Pt. Socket 1/2" Drive 1-1/4"
49945B 1/2" Drive Round Head Ratchet
49966 1/2" Drive 6" Extension
49978 1/2" Drive Universal Joint
49988B 1/2" Drive Flex Handle Ratchet
17 PIECE 1/2" DRIVE STANDARD SET• Weight: 9.90 lbs.
Item No. Contents Description
1218-S 40612 6 Pt. Standard Inch Socket 1/2" Drive 3/8"
40614 6 Pt. Standard Inch Socket 1/2" Drive 7/16"
40616 6 Pt. Standard Inch Socket 1/2" Drive 1/2"
40618 6 Pt. Standard Inch Socket 1/2" Drive 9/16"
40620 6 Pt. Standard Inch Socket 1/2" Drive 5/8"
40622 6 Pt. Standard Inch Socket 1/2" Drive 11/16"
40624 6 Pt. Standard Inch Socket 1/2" Drive 3/4"
40626 6 Pt. Standard Inch Socket 1/2" Drive 13/16"
40628 6 Pt. Standard Inch Socket 1/2" Drive 7/8"
40630 6 Pt. Standard Inch Socket 1/2" Drive 15/16"
40632 6 Pt. Standard Inch Socket 1/2" Drive 1"
40634 6 Pt. Standard Inch Socket 1/2" Drive 1-1/16"
40636 6 Pt. Standard Inch Socket 1/2" Drive 1-1/8"
40640 6 Pt. Standard Inch Socket 1/2" Drive 1-1/4"
49966 1/2" Drive 5" Extension
49945B 1/2" Drive Round Head Knurled Reversible Ratchet
49988B 1/2" Drive Flex Handle Ratchet
Sockets Sets.qxd 6/24/05 1:33 PM Page 88
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
89Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1 / 2 " D R I V E S O C K E T S E T S
17 PIECE 1/2" DRIVE METRIC SET• Weight: 9.00 lbs.
Item No. Contents Description
1217-MNB 43010M 12 Pt. Standard Metric Socket 1/2" Drive 10 mm
43011M 12 Pt. Standard Metric Socket 1/2" Drive 11 mm
43012M 12 Pt. Standard Metric Socket 1/2" Drive 12 mm
43013M 12 Pt. Standard Metric Socket 1/2" Drive 13 mm
43014M 12 Pt. Standard Metric Socket 1/2" Drive 14 mm
42017M 12 Pt. Standard Metric Socket 1/2" Drive 17 mm
42019M 12 Pt. Standard Metric Socket 1/2" Drive 19 mm
42022M 12 Pt. Standard Metric Socket 1/2" Drive 22 mm
42023M 12 Pt. Standard Metric Socket 1/2" Drive 23 mm
42024M 12 Pt. Standard Metric Socket 1/2" Drive 24 mm
42025M 12 Pt. Standard Metric Socket 1/2" Drive 25 mm
42026M 12 Pt. Standard Metric Socket 1/2" Drive 26 mm
42027M 12 Pt. Standard Metric Socket 1/2" Drive 27 mm
42028M 12 Pt. Standard Metric Socket 1/2" Drive 28 mm
49966 1/2" Drive 5" Extension
49945B 1/2" Drive Round Head Knurled Reversible Ratchet
49988B 1/2" Drive Flex Handle Ratchet
17 PIECE 1/2" DRIVE STANDARD SET• Weight: 9.90 lbs.
Item No. Contents Description
1217-S 40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"
40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"
40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"
40132 12 Pt. Standard Inch Socket 1/2" Drive 1"
40134 12 Pt. Standard Inch Socket 1/2" Drive 1-1/16"
40136 12 Pt. Standard Inch Socket 1/2" Drive 1-1/8"
40140 12 Pt. Standard Inch Socket 1/2" Drive 1-1/4"
40612 6 Pt. Standard Inch Socket 1/2" Drive 3/8"
40614 6 Pt. Standard Inch Socket 1/2" Drive 7/16"
40616 6 Pt. Standard Inch Socket 1/2" Drive 1/2"
40618 6 Pt. Standard Inch Socket 1/2" Drive 9/16"
40620 6 Pt. Standard Inch Socket 1/2" Drive 5/8"
40622 6 Pt. Standard Inch Socket 1/2" Drive 11/16"
40624 6 Pt. Standard Inch Socket 1/2" Drive 3/4"
49966 1/2" Drive 5" Extension
49945B 1/2" Drive Round Head Knurled Reversible Ratchet
49988B 1/2" Drive Flex Handle Ratchet
Sockets Sets.qxd 6/24/05 1:33 PM Page 89
Visit us at...www.stanleyproto.com90
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
15 PIECE 1/2" DRIVE STANDARD SOCKET SET• Weight: 3.70 lbs.
Item No. Contents Description
315-S 40112 12 Pt. Standard Inch Socket 1/2" Drive 3/8"
40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"
40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"
40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"
40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"
40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"
40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"
40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"
40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"
40132 12 Pt. Standard Inch Socket 1/2" Drive 1"
40134 12 Pt. Standard Inch Socket 1/2" Drive 1-1/16"
40136 12 Pt. Standard Inch Socket 1/2" Drive 1-1/8"
40138 12 Pt. Standard Inch Socket 1/2" Drive 1-3/16"
40140 12 Pt. Standard Inch Socket 1/2" Drive 1-1/4"
40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"
Clip Rail
15 PIECE 1/2" DRIVE METRIC SOCKET SET• Weight: 2.40 lbs.
Item No. Contents Description
315-M 43010M 12 Pt. Standard Metric Socket 1/2" Drive 10 mm
43011M 12 Pt. Standard Metric Socket 1/2" Drive 11 mm
43012M 12 Pt. Standard Metric Socket 1/2" Drive 12 mm
43013M 12 Pt. Standard Metric Socket 1/2" Drive 13 mm
43014M 12 Pt. Standard Metric Socket 1/2" Drive 14 mm
42015M 12 Pt. Standard Metric Socket 1/2" Drive 15 mm
42017M 12 Pt. Standard Metric Socket 1/2" Drive 17 mm
42018M 12 Pt. Standard Metric Socket 1/2" Drive 18 mm
42019M 12 Pt. Standard Metric Socket 1/2" Drive 19 mm
42021M 12 Pt. Standard Metric Socket 1/2" Drive 21 mm
42022M 12 Pt. Standard Metric Socket 1/2" Drive 22 mm
42024M 12 Pt. Standard Metric Socket 1/2" Drive 24 mm
42027M 12 Pt. Standard Metric Socket 1/2" Drive 27 mm
42030M 12 Pt. Standard Metric Socket 1/2" Drive 30 mm
42032M 12 Pt. Standard Metric Socket 1/2" Drive 32 mm
Clip Rail
12 PIECE 1/2" DRIVE STANDARD SET• Weight: 5.50 lbs.
Item No. Contents Description
1215 40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"
40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"
40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"
40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"
40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"
40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"
40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"
40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"
40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"
40132 12 Pt. Standard Inch Socket 1/2" Drive 1"
49945B 1/2" Drive Round Head Knurled Reversible Ratchet
49966 1/2" Drive 5" Extension
Sockets Sets.qxd 6/24/05 1:33 PM Page 90
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
91Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1 / 2 " D R I V E S O C K E T S E T S
11 PIECE 1/2" DRIVE STANDARD SOCKET SET• Weight: 4.20 lbs.
Item No. Contents Description
314-B 40612 6 Pt. Standard Inch Socket 1/2" Drive 3/8"
40614 6 Pt. Standard Inch Socket 1/2" Drive 7/16"
40616 6 Pt. Standard Inch Socket 1/2" Drive 1/2"
40618 6 Pt. Standard Inch Socket 1/2" Drive 9/16"
40620 6 Pt. Standard Inch Socket 1/2" Drive 5/8"
40622 6 Pt. Standard Inch Socket 1/2" Drive 11/16"
40624 6 Pt. Standard Inch Socket 1/2" Drive 3/4"
40626 6 Pt. Standard Inch Socket 1/2" Drive 13/16"
40628 6 Pt. Standard Inch Socket 1/2" Drive 7/8"
40630 6 Pt. Standard Inch Socket 1/2" Drive 15/16"
40632 6 Pt. Standard Inch Socket 1/2" Drive 1"
Clip Rail
11 PIECE 1/2" DRIVE STANDARD DEEP SOCKET SET• Weight: 4.00 lbs.
Item No. Contents Description
314-C 40316 12 Pt. Deep Inch Socket 1/2" Drive 1/2"
40318 12 Pt. Deep Inch Socket 1/2" Drive 9/16"
40320 12 Pt. Deep Inch Socket 1/2" Drive 5/8"
40322 12 Pt. Deep Inch Socket 1/2" Drive 11/16"
40324 12 Pt. Deep Inch Socket 1/2" Drive 3/4"
40326 12 Pt. Deep Inch Socket 1/2" Drive 13/16"
40328 12 Pt. Deep Inch Socket 1/2" Drive 7/8"
40330 12 Pt. Deep Inch Socket 1/2" Drive 15/16"
40332 12 Pt. Deep Inch Socket 1/2" Drive 1"
40334 12 Pt. Deep Inch Socket 1/2" Drive 1-1/16"
40336 12 Pt. Deep Inch Socket 1/2" Drive 1-1/8"
Clip Rail
11 PIECE 1/2" DRIVE STANDARD IMPACT SOCKET SET• Weight: 3.42 lbs.
Item No. Contents Description
310-BNB UW-1614 6 Pt. Standard Inch Impact Socket 1/2" Drive 7/16"
UW-1616 6 Pt. Standard Inch Impact Socket 1/2" Drive 1/2"
UW-1618 6 Pt. Standard Inch Impact Socket 1/2" Drive 9/16"
UW-1620 6 Pt. Standard Inch Impact Socket 1/2" Drive 5/8"
UW-1622 6 Pt. Standard Inch Impact Socket 1/2" Drive 11/16"
UW-1624 6 Pt. Standard Inch Impact Socket 1/2" Drive 3/4"
UW-1626 6 Pt. Standard Inch Impact Socket 1/2" Drive 13/16"
UW-1628 6 Pt. Standard Inch Impact Socket 1/2" Drive 7/8"
UW-1630 6 Pt. Standard Inch Impact Socket 1/2" Drive 15/16"
UW-1632 6 Pt. Standard Inch Impact Socket 1/2" Drive 1"
UW-1634 6 Pt. Standard Inch Impact Socket 1/2" Drive 1-1/16"
Clip Rail
Sockets Sets.qxd 6/24/05 1:33 PM Page 91
Visit us at...www.stanleyproto.com92
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
11 PIECE 1/2" DRIVE METRIC IMPACT SOCKET SET• Weight: 4.20 lbs.
Item No. Contents Description
311-BM UW-610M 6 Pt. Standard Metric Impact Socket 1/2" Drive 10 mm
UW-611M 6 Pt. Standard Metric Impact Socket 1/2" Drive 11 mm
UW-612M 6 Pt. Standard Metric Impact Socket 1/2" Drive 12 mm
UW-613M 6 Pt. Standard Metric Impact Socket 1/2" Drive 13 mm
UW-614M 6 Pt. Standard Metric Impact Socket 1/2" Drive 14 mm
UW-615M 6 Pt. Standard Metric Impact Socket 1/2" Drive 15 mm
UW-616M 6 Pt. Standard Metric Impact Socket 1/2" Drive 16 mm
UW-617M 6 Pt. Standard Metric Impact Socket 1/2" Drive 17 mm
UW-618M 6 Pt. Standard Metric Impact Socket 1/2" Drive 18 mm
UW-619M 6 Pt. Standard Metric Impact Socket 1/2" Drive 19 mm
UW-620M 6 Pt. Standard Metric Impact Socket 1/2" Drive 20 mm
Clip Rail
11 PIECE 1/2" DRIVE STANDARD DEEP IMPACT SOCKET SET• Weight: 7.20 lbs.
Item No. Contents Description
311-CNB UW-1514 6 Pt. Deep Inch Impact Socket 1/2" Drive 7/16"
UW-1516 6 Pt. Deep Inch Impact Socket 1/2" Drive 1/2"
UW-1518 6 Pt. Deep Inch Impact Socket 1/2" Drive 9/16"
UW-1520 6 Pt. Deep Inch Impact Socket 1/2" Drive 5/8"
UW-1522 6 Pt. Deep Inch Impact Socket 1/2" Drive 11/16"
UW-1524 6 Pt. Deep Inch Impact Socket 1/2" Drive 3/4"
UW-1526 6 Pt. Deep Inch Impact Socket 1/2" Drive 13/16"
UW-1528 6 Pt. Deep Inch Impact Socket 1/2" Drive 7/8"
UW-1530 6 Pt. Deep Inch Impact Socket 1/2" Drive 15/16"
UW-1532 6 Pt. Deep Inch Impact Socket 1/2" Drive 1"
UW-1534 6 Pt. Deep Inch Impact Socket 1/2" Drive 1-1/16"
Clip Rail
11 PIECE 1/2" DRIVE METRIC DEEP IMPACT SOCKET SET• Weight: 7.20 lbs.
Item No. Contents Description
311-DM UW-510M 6 Pt. Deep Metric Impact Socket 1/2" Drive 10 mm
UW-511M 6 Pt. Deep Metric Impact Socket 1/2" Drive 11 mm
UW-512M 6 Pt. Deep Metric Impact Socket 1/2" Drive 12 mm
UW-513M 6 Pt. Deep Metric Impact Socket 1/2" Drive 13 mm
UW-514M 6 Pt. Deep Metric Impact Socket 1/2" Drive 14 mm
UW-515M 6 Pt. Deep Metric Impact Socket 1/2" Drive 15 mm
UW-516M 6 Pt. Deep Metric Impact Socket 1/2" Drive 16 mm
UW-517M 6 Pt. Deep Metric Impact Socket 1/2" Drive 17 mm
UW-518M 6 Pt. Deep Metric Impact Socket 1/2" Drive 18 mm
UW-519M 6 Pt. Deep Metric Impact Socket 1/2" Drive 19 mm
UW-520M 6 Pt. Deep Metric Impact Socket 1/2" Drive 20 mm
Clip Rail
Sockets Sets.qxd 6/24/05 1:33 PM Page 92
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
93Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1 / 2 " D R I V E S O C K E T S E T S
10 PIECE 1/2" DRIVE STANDARD SOCKET SET• Weight: 1.50 lbs.
Item No. Contents Description
210-B 40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"
40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"
40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"
40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"
40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"
40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"
40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"
40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"
40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"
40132 12 Pt. Standard Inch Socket 1/2" Drive 1"
Clip Rail
10 PIECE 1/2" DRIVE METRIC SOCKET SET• Weight: 3.42 lbs.
Item No. Contents Description
310-MNB 43010M 12 Pt. Standard Metric Socket 1/2" Drive 10 mm
43011M 12 Pt. Standard Metric Socket 1/2" Drive 11 mm
43012M 12 Pt. Standard Metric Socket 1/2" Drive 12 mm
43013M 12 Pt. Standard Metric Socket 1/2" Drive 13 mm
43014M 12 Pt. Standard Metric Socket 1/2" Drive 14 mm
43015M 12 Pt. Standard Metric Socket 1/2" Drive 15 mm
42016M 12 Pt. Standard Metric Socket 1/2" Drive 16 mm
42017M 12 Pt. Standard Metric Socket 1/2" Drive 17 mm
42018M 12 Pt. Standard Metric Socket 1/2" Drive 18 mm
42019M 12 Pt. Standard Metric Socket 1/2" Drive 19 mm
Clip Rail
10 PIECE 1/2" DRIVE METRIC DEEP SOCKET SET• Weight: 3.70 lbs.
Item No. Contents Description
310-C 45010M 6 Pt. Deep Metric Socket 1/2" Drive 10 mm
45011M 6 Pt. Deep Metric Socket 1/2" Drive 11 mm
45012M 6 Pt. Deep Metric Socket 1/2" Drive 12 mm
45013M 6 Pt. Deep Metric Socket 1/2" Drive 13 mm
45014M 6 Pt. Deep Metric Socket 1/2" Drive 14 mm
45015M 6 Pt. Deep Metric Socket 1/2" Drive 15 mm
45016M 6 Pt. Deep Metric Socket 1/2" Drive 16 mm
45017M 6 Pt. Deep Metric Socket 1/2" Drive 17 mm
45018M 6 Pt. Deep Metric Socket 1/2" Drive 18 mm
45019M 6 Pt. Deep Metric Socket 1/2" Drive 19 mm
Clip Rail
10 PIECE 1/2" DRIVE METRIC DEEP SOCKET SET• Weight: 3.70 lbs.
Item No. Contents Description
309-M 44010M 12 Pt. Deep Metric Socket 1/2" Drive 10 mm
44011M 12 Pt. Deep Metric Socket 1/2" Drive 11 mm
44012M 12 Pt. Deep Metric Socket 1/2" Drive 12 mm
44013M 12 Pt. Deep Metric Socket 1/2" Drive 13 mm
44014M 12 Pt. Deep Metric Socket 1/2" Drive 14 mm
44015M 12 Pt. Deep Metric Socket 1/2" Drive 15 mm
44016M 12 Pt. Deep Metric Socket 1/2" Drive 16 mm
44017M 12 Pt. Deep Metric Socket 1/2" Drive 17 mm
44018M 12 Pt. Deep Metric Socket 1/2" Drive 18 mm
44019M 12 Pt. Deep Metric Socket 1/2" Drive 19 mm
Clip Rail
Sockets Sets.qxd 6/24/05 1:33 PM Page 93
Torx® is a registered trademark of Textron.Visit us at...www.stanleyproto.com94
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
9 PIECE 1/2" DRIVE STANDARD DEEP SOCKET SET• Weight: 3.60 lbs.
Item No. Contents Description
309-BS 40416 6 Pt. Deep Inch Socket 1/2" Drive 1/2"
40418 6 Pt. Deep Inch Socket 1/2" Drive 9/16"
40420 6 Pt. Deep Inch Socket 1/2" Drive 5/8"
40422 6 Pt. Deep Inch Socket 1/2" Drive 11/16"
40424 6 Pt. Deep Inch Socket 1/2" Drive 3/4"
40426 6 Pt. Deep Inch Socket 1/2" Drive 13/16"
40428 6 Pt. Deep Inch Socket 1/2" Drive 7/8"
40430 6 Pt. Deep Inch Socket 1/2" Drive 15/16"
40432 6 Pt. Deep Inch Socket 1/2" Drive 1"
Clip Rail
8 PIECE 1/2" DRIVE METRIC SOCKET SET• Weight: 1.60 lbs.
Item No. Contents Description
308-M 42010M 6 Pt. Standard Metric Socket 1/2" Drive 10 mm
42011M 6 Pt. Standard Metric Socket 1/2" Drive 11 mm
42012M 6 Pt. Standard Metric Socket 1/2" Drive 12 mm
42013M 6 Pt. Standard Metric Socket 1/2" Drive 13 mm
42014M 6 Pt. Standard Metric Socket 1/2" Drive 14 mm
43015M 6 Pt. Standard Metric Socket 1/2" Drive 15 mm
43017M 6 Pt. Standard Metric Socket 1/2" Drive 17 mm
43019M 6 Pt. Standard Metric Socket 1/2" Drive 19 mm
Clip Rail
28 PIECE 3/4" DRIVE STANDARD DRIVE SET• Weight: 67.00 lbs.
Item No. Contents Description
428-BS 60026A 12 Pt. Standard Inch Socket 3/4" Drive 3/4"
60027A 12 Pt. Standard Inch Socket 3/4" Drive 13/16"
60028 12 Pt. Standard Inch Socket 3/4" Drive 7/8"
60030 12 Pt. Standard Inch Socket 3/4" Drive 15/16"
60032 12 Pt. Standard Inch Socket 3/4" Drive 1"
60034 12 Pt. Standard Inch Socket 3/4" Drive 1-1/16"
60036 12 Pt. Standard Inch Socket 3/4" Drive 1-1/8"
60038 12 Pt. Standard Inch Socket 3/4" Drive 1-3/16"
60040 12 Pt. Standard Inch Socket 3/4" Drive 1-1/4"
60042 12 Pt. Standard Inch Socket 3/4" Drive 1-5/16"
60044 12 Pt. Standard Inch Socket 3/4" Drive 1-3/8"
60046 12 Pt. Standard Inch Socket 3/4" Drive 1-7/16"
60048 12 Pt. Standard Inch Socket 3/4" Drive 1-1/2"
60050 12 Pt. Standard Inch Socket 3/4" Drive 1-9/16"
60052 12 Pt. Standard Inch Socket 3/4" Drive 1-5/8"
60054 12 Pt. Standard Inch Socket 3/4" Drive 1-11/16"
60056 12 Pt. Standard Inch Socket 3/4" Drive 1-3/4"
60058 12 Pt. Standard Inch Socket 3/4" Drive 1-13/16"
60060 12 Pt. Standard Inch Socket 3/4" Drive 1-7/8"
60064 12 Pt. Standard Inch Socket 3/4" Drive 2"
60068 12 Pt. Standard Inch Socket 3/4" Drive 2-1/8"
60072 12 Pt. Standard Inch Socket 3/4" Drive 2-1/4"
60076 12 Pt. Standard Inch Socket 3/4" Drive 2-3/8"
69995 3/4" Drive 8" Extension
69994 3/4" Drive 16" Extension
69997 3/4" Drive Sliding-Tee
69945B 3/4" Drive Round Head Knurled Reversible Ratchet
69993 3/4" Drive 4" Extension
Metal Box
Sockets Sets.qxd 6/24/05 1:33 PM Page 94
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
95Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1 / 4 " , 3 / 8 " , 1 / 2 " & 3 / 4 " D R I V E S O C K E T S E T S
15 PIECE 3/4" DRIVE STANDARD SET• Weight: 26.00 lbs.
Item No. Contents Description
415-B 60028 12 Pt. Standard Inch Socket 3/4" Drive 7/8"
60030 12 Pt. Standard Inch Socket 3/4" Drive 15/16"
60032 12 Pt. Standard Inch Socket 3/4" Drive 1"
60034 12 Pt. Standard Inch Socket 3/4" Drive 1-1/16"
60036 12 Pt. Standard Inch Socket 3/4" Drive 1-1/8"
60038 12 Pt. Standard Inch Socket 3/4" Drive 1-3/16"
60040 12 Pt. Standard Inch Socket 3/4" Drive 1-1/4"
60042 12 Pt. Standard Inch Socket 3/4" Drive 1-5/6"
60044 12 Pt. Standard Inch Socket 3/4" Drive 1-3/8"
60046 12 Pt. Standard Inch Socket 3/4" Drive 1-7/16"
60048 12 Pt. Standard Inch Socket 3/4" Drive 1-1/2"
60050 12 Pt. Standard Inch Socket 3/4" Drive 1-9/16"
60052 12 Pt. Standard Inch Socket 3/4" Drive 1-5/8"
69945B 3/4" Drive Round Head Knurled Reversible Ratchet
69995 3/4" Drive 8" Extension
Metal Box
11 PIECE 3/4" DRIVE STANDARD SET• Weight: 22.11 lbs.
Item No. Contents Description
411-BNB 60030 12 Pt. Socket 3/4" Drive 15/16"
60032 12 Pt. Socket 3/4" Drive 1"
60034 12 Pt. Socket 3/4" Drive 1-1/16"
60036 12 Pt. Socket 3/4" Drive 1-1/8"
60040 12 Pt. Socket 3/4" Drive 1-1/4"
60044 12 Pt. Socket 3/4" Drive 1-3/8"
60046 12 Pt. Socket 3/4" Drive 1-7/16"
60048 12 Pt. Socket 3/4" Drive 1-1/2"
60052 12 Pt. Socket 3/4" Drive 1-5/8"
69945B 3/4" Drive Round Head Knurled Reversible Ratchet
69995 3/4" Drive 8" Extension
Metal Box
12 PIECE 1/4", 3/8" AND 1/2" DRIVE INTERNAL TORX® SOCKET SET• Weight: 0.98 lbs.
Item No. Contents Description
TS-612NB TS-1210 Internal Socket Socket 1/4" Drive T10
TS-1215 Internal Socket 1/4" Drive T15
TS-1220 Internal Socket 1/4" Drive T20
TS-1225 Internal Socket 1/4" Drive T25
TS-1227 Internal Socket 1/4" Drive T27
TS-1230 Internal Socket 1/4" Drive T30
TS-1340 Internal Socket 3/8" Drive T40
TS-1345 Internal Socket 3/8" Drive T45
TS-1347 Internal Socket 3/8" Drive T47
TS-1350 Internal Socket 3/8" Drive T50
TS-1355 Internal Socket 3/8" Drive T55
TS-1460 Internal Socket 1/2" Drive T60
TS-612C Plastic Holder
Sockets Sets.qxd 6/24/05 1:33 PM Page 95
1 / 4 " , 3 / 8 " & S O C K E T S E T S
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
Visit us at...www.stanleyproto.com96
CO
MB
INA
TIO
NS
OC
KE
TS
ET
S
7 PIECE 1/4" AND 3/8" DRIVE EXTERNAL TORX® SOCKET SET• Weight: 0.52 lbs.
Item No. Contents Description
TS-627NB TS-2206 External Socket 1/4" Drive E6
TS-2207 External Socket 1/4" Drive E7
TS-2208 External Socket 1/4" Drive E8
TS-2310 External Socket 3/8" Drive E10
TS-2312 External Socket 3/8" Drive E12
TS-2314 External Socket 3/8" Drive E14
TS-2316 External Socket 3/8" Drive E16
TS-627C Plastic Holder
26 PIECE 1/4" DRIVE STANDARD AND METRIC RATCHETING SET• Weight: 1.14 lbs.
Item No. Contents Description
9026NB GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"
GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"
GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"
GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"
GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"
GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"
GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"
GW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mm
GW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mm
GW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mm
GW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mm
GW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mm
GW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mm
GW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mm
9000-T10 Insert Bit Torx® Bit T10
9000-T15 Insert Bit Torx® Bit T15
9000-T20 Insert Bit Torx® Bit T20
9000-T25 Insert Bit Torx® Bit T25
9000-T30 Insert Bit Torx® Bit T30
900-21 Insert Bit # 1 Pt. Phillips®
900-22 Insert Bit # 2 Pt. Phillips®
900-4 Insert Bit Slotted Bit, 3/16"
900-6 Insert Bit Slotted Bit, 1/4"
900-7 Insert Bit Slotted Bit, 9/32"
9000-A Insert Bit Adapter Socket
9000R Insert Bit Ratcheting Screwdriver
Sockets Sets.qxd 6/24/05 1:33 PM Page 96
SOCKETS & ACCESSORIES.DESIGNED TO INCREASE TORQUE.
The radius corner design of BlackhawkTM by Proto® sockets allows contact with the flat edges of the fastener,
not the points. This style of contact moves the driving force from the corners to the flat areas, increasing the
torque on the fastener, reducing rounding and increasing safety. Ratchets, sockets and accessories are
double-nickel chrome plated for a corrosion resistant, full polish finish.
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 97
Visit us at...www.stanleyproto.com98
SO
CK
ET
S&
AC
CE
SS
OR
IES
1/4" DRIVE QUICK RELEASE RATCHET• Full polish.• Chrome plated positive grip ratchet.• 43 tooth design, double pawl. • 8.4 degrees of arc required for new “bite.”• Works easily in confined areas.• Knurled speed ring means you can start the fastener without turning the handle.
Item No. Description Length Weight
GW-9955B Quick Release Ratchet 5.75" 0.31 lbs.
ASME B107.10M
1/4" DRIVE ROUND HEAD REVERSIBLE RATCHET• Chrome plated positive grip ratchet.• 43 tooth design.• Works easily in confined areas.• Knurled speed ring means you can start the fastener without turning the handle.
Item No. Description Length Weight
GW-9945B 43 Tooth 5.80" 0.41 lbs.
GW-9945BR Ratchet Renewal Kit
ASME B107.10M
1/4" DRIVE FLEX HEAD RATCHET• Features the same design as our standard ratchet (GW-9945B).• No grooves or ball bearing to wear out in the hinge.• Springs in each of the forks of the hinge allow for infinite angles.
Item No. Description Length Weight
GW-9935B 43 Tooth Flex-Head 6.68" 0.38 lbs.
GW-9945BR Ratchet Renewal Kit
1/4" DRIVE ROTATORTM RATCHET• Handle rotates 360º in either direction for rapid “twist-action” nut and fastener
application and removal.• Pear head design.• Quick-release switch for fast socket removal.
Item No. Length Weight
GW-9946R 7.25" 0.50 lbs.
ASME B107.10M
1/4" DRIVE FLEX HANDLE
Item No. Length Weight
GW-9749B 5.90" 0.24 lbs.
ASME B107.10M
1/4" DRIVE EXTENSIONS
Item No. Length Weight
GW-9898 3.00" 0.08 lbs.
GW-9899 6.00" 0.16 lbs.
ASME B107.10M
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 98
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
SO
CK
ET
S&
AC
CE
SS
OR
IES
99Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1/4" DRIVE FLEXIBLE SPINNER• Flexible shaft permits reaching around obstructions.
Item No. Length Weight
GW-9545 6.63" 0.14 lbs.
1/4" DRIVE SPINNER HANDLE
Item No. Length Weight
GW-9550 6" 0.20 lbs.
ASME B107.10M
1/4" DRIVE UNIVERSAL JOINT
Item No. Length Weight
GW-9578 1.25" 0.06 lbs.
ASME B107.10M
1/4" DRIVE ADAPTER
Part No. Female/Male Length Weight
34960 1/4" to 3/8" 1.0" 0.04 lbs.
ASME B107.10M
1/4" DRIVE SOCKETS — 6 POINT
Item No. Size Length Weight
GW-1605 5/32" 0.8" 0.03 lbs.
GW-1606 3/16" 0.8" 0.03 lbs.
GW-1607 7/32" 0.8" 0.03 lbs.
GW-1608 1/4" 0.8" 0.03 lbs.
GW-1609 9/32" 0.8" 0.03 lbs.
GW-1610 5/16" 0.8" 0.03 lbs.
GW-1611 11/32" 0.8" 0.04 lbs.
GW-1612 3/8" 0.8" 0.04 lbs.
GW-1614 7/16" 0.8" 0.05 lbs.
GW-1616 1/2" 0.8" 0.05 lbs.
ASME B107.1
1/4" DRIVE METRIC SOCKETS — 6 POINT
Item No. Size Length Weight
GW-604M 4 mm 0.8" 0.02 lbs
GW-645M 4.5 mm 0.8" 0.03 lbs
GW-605M 5 mm 0.8" 0.03 lbs
GW-655M 5.5 mm 0.8" 0.03 lbs
GW-606M 6 mm 0.8" 0.03 lbs
GW-607M 7 mm 0.8" 0.03 lbs
GW-608M 8 mm 0.8" 0.03 lbs
GW-609M 9 mm 0.8" 0.03 lbs
GW-610M 10 mm 0.8" 0.04 lbs
GW-611M 11 mm 0.8" 0.06 lbs
GW-612M 12 mm 0.8" 0.06 lbs
GW-613M 13 mm 0.8" 0.06 lbs
ASME B107.5M
1 / 4 " D R I V E R A T C H E T S , A C C E S S O R I E S & S O C K E T S
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 99
Visit us at...www.stanleyproto.com100
SO
CK
ET
S&
AC
CE
SS
OR
IES
1/4" DRIVE DEEP SOCKETS — 6 POINT
Item No. Size Length Weight
GW-1506 3/16" 1.9" 0.06 lbs.
GW-1507 7/32" 1.9" 0.06 lbs.
GW-1508 1/4" 1.9" 0.06 lbs.
GW-1509 9/32" 1.9" 0.06 lbs.
GW-1510 5/16" 1.9" 0.06 lbs.
GW-1511 11/32" 1.9" 0.08 lbs.
GW-1512 3/8" 1.9" 0.09 lbs.
GW-1514 7/16" 1.9" 0.10 lbs.
GW-1516 1/2" 1.9" 0.12 lbs.
ASME B107.1M
1/4" DRIVE DEEP METRIC SOCKETS — 6 POINT
Item No. Size Length Weight
GW-504M 4 mm 1.9" 0.05 lbs.
GW-505M 5 mm 1.9" 0.06 lbs.
GW-506M 6 mm 1.9" 0.06 lbs.
GW-507M 7 mm 1.9" 0.06 lbs.
GW-508M 8 mm 1.9" 0.06 lbs.
GW-509M 9 mm 1.9" 0.07 lbs.
GW-510M 10 mm 1.9" 0.09 lbs.
GW-511M 11 mm 1.9" 0.10 lbs.
GW-512M 12 mm 1.9" 0.11 lbs.
GW-513M 13 mm 1.9" 0.11 lbs.
ASME B107.5M
1/4" DRIVE SOCKETS — 8 POINT
Item No. Size Length Weight
GW-1208 1/4" 0.8" 0.02 lbs.
GW-1210 5/16" 0.8" 0.04 lbs.
GW-1212 3/8" 0.8" 0.06 lbs.
ASME B107.1
1/4" DRIVE SOCKETS — 12 POINT
Item No. Size Length Weight
GW-1705 5/32" 0.8" 0.02 lbs.
GW-1706 3/16" 0.8" 0.03 lbs.
GW-1707 7/32" 0.8" 0.03 lbs.
GW-1708 1/4" 0.8" 0.03 lbs.
GW-1709 9/32" 0.8" 0.03 lbs.
GW-1710 5/16" 0.8" 0.04 lbs.
GW-1711 11/32" 0.8" 0.04 lbs.
GW-1712 3/8" 0.8" 0.05 lbs.
GW-1714 7/16" 0.8" 0.05 lbs.
GW-1716 1/2" 0.8" 0.06 lbs.
ASME B107.1
1/4" DRIVE METRIC SOCKETS — 12 POINT
Item No. Size Length Weight
GW-705M 5 mm 0.8" 0.01 lbs.
GW-755M 5.5 mm 0.8" 0.02 lbs.
GW-706M 6 mm 0.8" 0.02 lbs.
GW-707M 7 mm 0.8" 0.02 lbs.
GW-708M 8 mm 0.8" 0.02 lbs.
GW-709M 9 mm 0.8" 0.03 lbs.
GW-710M 10 mm 0.8" 0.04 lbs.
GW-711M 11 mm 0.8" 0.05 lbs.
GW-712M 12 mm 0.8" 0.05 lbs.
GW-713M 13 mm 0.8" 0.06 lbs.
ASME B107.5MTorx® is a registered trademark of Textron.
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 100
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
SO
CK
ET
S&
AC
CE
SS
OR
IES
101Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1/4" DRIVE DEEP SOCKETS — 12 POINT
Item No. Size Length Weight
GW-1406 3/16" 1.9" 0.02 lbs.
GW-1407 7/32" 1.9" 0.02 lbs.
GW-1408 1/4" 1.9" 0.02 lbs.
GW-1409 9/32" 1.9" 0.02 lbs.
GW-1410 5/16" 1.9" 0.02 lbs.
GW-1411 11/32" 1.9" 0.02 lbs.
GW-1412 3/8" 1.9" 0.03 lbs.
GW-1414 7/16" 1.9" 0.03 lbs.
GW-1416 1/2" 1.9" 0.04 lbs.
ASME B107.1
1/4" DRIVE DEEP METRIC SOCKETS — 12 POINT
Item No. Size Length Weight
GW-1605M 5 mm 1.9" 0.07 lbs
GW-1606M 6 mm 1.9" 0.09 lbs
GW-1607M 7 mm 1.9" 0.09 lbs
GW-1608M 8 mm 1.9" 0.15 lbs
GW-1609M 9 mm 1.9" 0.06 lbs.
GW-1610M 10 mm 1.9" 0.04 lbs.
GW-1611M 11 mm 1.9" 0.04 lbs.
GW-1612M 12 mm 1.9" 0.10 lbs.
GW-1613M 13 mm 1.9" 0.11 lbs.
ASME B107.5M
1/4" DRIVE TORX® SOCKETS INTERNAL
Item No. Size Weight
TS-1209 T9 0.02 lbs.
TS-1210 T10 0.02 lbs.
TS-1215 T15 0.02 lbs.
TS-1220 T20 0.03 lbs.
TS-1225 T25 0.03 lbs.
TS-1227 T27 0.03 lbs.
TS-1230 T30 0.04 lbs.
1/4" DRIVE TAMPER-RESISTANT TORX® SOCKETS INTERNAL
Item No. Size Weight
TR-3210 T10 0.03 lbs.
TR-3215 T15 0.03 lbs.
TR-3220 T20 0.03 lbs.
TR-3225 T25 0.04 lbs.
TR-3227 T27 0.04 lbs.
TR-3230 T30 0.04 lbs.
1/4" DRIVE TORX® SOCKETS EXTERNAL
Item No. Size Weight
TS-2204 E4 0.04 lbs.
TS-2205 E5 0.04 lbs.
TS-2206 E6 0.04 lbs.
TS-2207 E7 0.04 lbs.
TS-2208 E8 0.04 lbs.
1/4" DRIVE HEX BIT HOLDER
Item No. Size Weight
9000H 1/4" 0.05 lbs.
1/4 " D R I V E S O C K E T S
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 101
Visit us at...www.stanleyproto.com102
SO
CK
ET
S&
AC
CE
SS
OR
IES
3/8" DRIVE QUICK RELEASE RATCHET• Full polish.• Chrome plated positive grip ratchet.• 41 tooth design, double pawl. • 8.8 degrees of arc required for new “bite.”• Works easily in confined areas.• Knurled speed ring means you can start the fastener without turning the handle.
Item No. Description Length Weight
34946B 41 Tooth Double Pawl 7.9" 0.76 lbs.
34946BR Ratchet Renewal Kit 0.20 lbs.
ASME B107.10M
3/8" DRIVE ROUND HEAD REVERSIBLE RATCHET• Chrome plated positive grip ratchet.• 41 tooth design.• Works easily in confined areas.• Knurled speed ring means you can start the fastener without turning the handle.
Item No. Description Length Weight
34945B 41 Tooth 7.9" 0.79 lbs.
34945BR Ratchet Renewal Kit 0.23 lbs.
ASME B107.10M
3/8" DRIVE INDEXIBLE HEAD RATCHET• Full polish.• Chrome plated positive grip ratchet.• 5-position adjustable head allows the user to maneuver around obstructions and
allows access to hard-to-reach fasteners.• Head rotates 360° in the unlocked position to “speed” the fastener on or off.• Quick release feature holds sockets securely and releases them on demand.
Item No. Description Length Weight
34950X 60 Tooth 10" 0.99 lbs.
3/8" DRIVE BENT HANDLE FLEX-HEAD RATCHET
Item No. Description Length Weight
34947B 41 Tooth 10.9" 1.01 lbs.
34945BR Ratchet Renewal Kit 0.23 lbs.
3/8" DRIVE FLEX-HEAD RATCHET• Same head design as the 34945B.• No grooves or ball bearing to wear out in the hinge.• Springs in each of the forks of the hinge allow for infinite angles.
Item No. Description Length Weight
34935B 41 Tooth 11" 0.98 lbs.
34945BR Ratchet Renewal Kit 0.23 lbs.
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 102
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
SO
CK
ET
S&
AC
CE
SS
OR
IES
103Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
3/8" DRIVE MINI FLEX RATCHET• This compact flex head ratchet allows you to reach places inaccessible to
standard ratchets. • Head design is the same as the 34945B.
Item No. Description Length Weight
34948B 41 Tooth 5.9" 0.62 lbs.
34945BR Ratchet Renewal Kit 0.23 lbs.
3/8" DRIVE ROTATORTM RATCHET• Handle rotates 360º in either direction for rapid “twist-action” nut and fastener
application and removal.• Pear head design.• Quick-release switch for fast socket removal.
Item No. Length Weight
34950R 8.8" 1.0 lbs.
ASME B107.10M
3/8" DRIVE FLEX HANDLE
Item No. Length Weight
34986B 9.8" 0.67 lbs.
ASME B107.10M
3/8" DRIVE SPEEDER
Item No. Length Weight
34982 15.5" 0.92 lbs.
ASME B107.10M
3/8" DRIVE EXTENSIONS
Item No. Length Weight
34989 1.7" 0.10 lbs.
34988 3.0" 0.16 lbs.
34987 6.0" 0.32 lbs.
34984 12.0" 0.63 lbs.
34983 20.0" 1.07 lbs.
ASME B107.10M
3/8" DRIVE UNIVERSAL JOINT
Item No. Description Length Weight
34993 Universal Joint 1.9" 0.14 lbs.
ASME B107.10M
3 / 8 " D R I V E R A T C H E T S & A C C E S S O R I E S
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 103
Visit us at...www.stanleyproto.com104
SO
CK
ET
S&
AC
CE
SS
OR
IES
3/8" DRIVE ADAPTERS
Item No. Female/Male Length Weight
34963 3/8" to 1/4" 0.60" 0.06 lbs.
34966 3/8" to 1/2" 1.40" 0.10 lbs.
ASME B107.10M
3/8" DRIVE SPARK PLUG SOCKETS — 6 POINT• Rubber insert included to help grip socket plug and reduce breakage.
Item No. Opening Weight
HW-1520S 5/8" 0.22 lbs.
HW-1526S 13/16" 0.33 lbs.
ASME B107.34M
3/8" DRIVE UNIVERSAL SPARK PLUG SOCKETS — 6 POINT• Rubber insert included to help grip socket plug and reduce breakage.
Item No. Size Length Weight
30320S 5/8" 3.3" 0.26 lbs.
30326 13/16" 3.5" 0.41 lbs.
ASME B107.34M
3/8" DRIVE UNIVERSAL SOCKETS — 6 POINT
Item No. Size Length Weight
30212 3/8" 1.7" 0.12 lbs.
30214 7/16" 1.8" 0.13 lbs.
30216 1/2" 1.8" 0.14 lbs.
30218 9/16" 1.8" 0.14 lbs.
30220 5/8" 1.9" 0.15 lbs.
30222 11/16" 1.9" 0.17 lbs.
30224 3/4" 2.0" 0.18 lbs.
ASME B107.1
3/8" DRIVE METRIC UNIVERSAL SOCKETS — 6 POINT
Item No. Size Length Weight
30209M 9 mm 1.7" 0.12 lbs.
30210M 10 mm 1.8" 0.13 lbs.
30211M 11 mm 1.8" 0.14 lbs.
30212M 12 mm 1.8" 0.14 lbs.
30213M 13 mm 1.9" 0.14 lbs.
30214M 14 mm 1.9" 0.14 lbs.
30215M 15 mm 2.0" 0.15 lbs.
ASME B107.5M
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 104
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
SO
CK
ET
S&
AC
CE
SS
OR
IES
105Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
3/8" DRIVE SOCKETS — 6 POINT
Item No. Size Length Weight
30608 1/4" 0.9" 0.05 lbs.30010 5/16" 0.9" 0.05 lbs.30612 3/8" 0.9" 0.05 lbs.30614 7/16" 0.9" 0.05 lbs.30616 1/2" 1.0" 0.07 lbs.30618 9/16" 1.0" 0.08 lbs.30620 5/8" 1.0" 0.10 lbs.30622 11/16" 1.0" 0.10 lbs.30624 3/4" 1.1" 0.13 lbs.30626 13/16" 1.2" 0.15 lbs.30628 7/8" 1.2" 0.20 lbs.30630 15/16" 1.2" 0.22 lbs.30632 1" 1.4" 0.27 lbs.
ASME B107.1
3/8" DRIVE METRIC SOCKETS — 6 POINT
Item No. Size Length Weight
32007M 7 mm 0.9" 0.05 lbs.32008M 8 mm 0.9" 0.05 lbs.32009M 9 mm 0.9" 0.05 lbs.32010M 10 mm 0.9" 0.05 lbs.32011M 11 mm 0.9" 0.06 lbs.32012M 12 mm 1.0" 0.06 lbs.32013M 13 mm 1.0" 0.07 lbs.32014M 14 mm 1.0" 0.08 lbs.32015M 15 mm 1.0" 0.09 lbs.32016M 16 mm 1.0" 0.10 lbs.32017M 17 mm 1.0" 0.12 lbs.32018M 18 mm 1.1" 0.13 lbs.32019M 19 mm 1.1" 0.14 lbs.32020M 20 mm 1.2" 0.18 lbs.32021M 21 mm 1.2" 0.17 lbs.32022M 22 mm 1.2" 0.21 lbs.
ASME B107.5M
3/8" DRIVE SOCKETS — 8 POINT
Item No. Size Length Weight
31108 1/4" 0.9" 0.06 lbs.31110 5/16" 0.9" 0.06 lbs.31112 3/8" 0.9" 0.07 lbs.31114 7/16" 0.9" 0.10 lbs.31116 1/2" 1.0" 0.11 lbs.
ASME B107.1
3/8" DRIVE SOCKETS — 12 POINT
Item No. Size Length Weight
30010A 5/16" 0.9" 0.05 lbs.30012 3/8" 0.9" 0.05 lbs.30014 7/16" 0.9" 0.05 lbs.30016 1/2" 0.9" 0.07 lbs.30018 9/16" 1.0" 0.09 lbs.30020 5/8" 1.0" 0.09 lbs.30022 11/16" 1.0" 0.10 lbs.30024 3/4" 1.1" 0.14 lbs.30026 13/16" 1.2" 0.15 lbs.30028 7/8" 1.2" 0.19 lbs.300301 15/16" 1.2" 0.30 lbs.300321 1" 1.4" 0.32 lbs.
ASME B107.1
3 / 8 " D R I V E S O C K E T S
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 105
Visit us at...www.stanleyproto.com106
SO
CK
ET
S&
AC
CE
SS
OR
IES
3/8" DRIVE METRIC SOCKETS — 12 POINT
Item No. Size Length Weight
34007M 7 mm 0.9" 0.05 lbs.
34008M 8 mm 0.9" 0.05 lbs.
34009M 9 mm 0.9" 0.06 lbs.
34010M 10 mm 0.9" 0.06 lbs.
34011M 11 mm 0.9" 0.06 lbs.
34012M 12 mm 1.0" 0.06 lbs.
34013M 13 mm 1.0" 0.08 lbs.
34014M 14 mm 1.0" 0.08 lbs.
34015M 15 mm 1.0" 0.10 lbs.
34016M 16 mm 1.0" 0.10 lbs.
34017M 17 mm 1.0" 0.13 lbs.
34018M 18 mm 1.1" 0.14 lbs.
34019M 19 mm 1.1" 0.14 lbs.
34020M 20 mm 1.2" 0.17 lbs.
34021M 21 mm 1.2" 0.18 lbs.
34022M 22 mm 1.2" 0.21 lbs.
ASME B107.5M
3/8" DRIVE DEEP SOCKETS — 6 POINT
Item No. Size Length Weight
HW-1510 5/16" 1.8" 0.09 lbs.
HW-1512 3/8" 1.8" 0.09 lbs.
HW-1514 7/16" 1.8" 0.10 lbs.
HW-1516 1/2" 1.8" 0.12 lbs.
HW-1518 9/16" 2.0" 0.18 lbs.
HW-1520 5/8" 2.1" 0.20 lbs.
HW-1522 11/16" 2.2" 0.24 lbs.
HW-1524 3/4" 2.2" 0.27 lbs.
HW-1526 13/16" 2.5" 0.33 lbs.
HW-1528 7/8" 2.5" 0.40 lbs.
HW-1530 15/16" 2.8" 0.50 lbs.
HW-1532 1" 2.8" 0.56 lbs.
ASME B107.1
3/8" DRIVE METRIC DEEP SOCKETS — 6 POINT
Item No. Size Length Weight
HW-1507M 7 mm 2.1" 0.10 lbs.
HW-1508M 8 mm 2.1" 0.10 lbs.
HW-1509M 9 mm 2.1" 0.11 lbs.
HW-1510M 10 mm 1.8" 0.11 lbs.
HW-1511M 11 mm 1.8" 0.11 lbs.
HW-1512M 12 mm 1.8" 0.12 lbs.
HW-1513M 13 mm 1.8" 0.13 lbs.
HW-1514M 14 mm 2.0" 0.16 lbs.
HW-1515M 15 mm 2.1" 0.21 lbs.
HW-1517M 17 mm 2.2" 0.22 lbs.
HW-1518M 18 mm 2.2" 0.22 lbs.
HW-1519M 19 mm 2.2" 0.33 lbs.
ASME B107.5M
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 106
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
SO
CK
ET
S&
AC
CE
SS
OR
IES
107Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
3/8" DRIVE DEEP SOCKETS — 12 POINT
Item No. Size Length Weight
30412 3/8" 1.8" 0.09 lbs.
30414 7/16" 1.8" 0.09 lbs.
30416 1/2" 1.8" 0.12 lbs.
30418 9/16" 2.0" 0.16 lbs.
30420 5/8" 2.1" 0.18 lbs.
30422 11/16" 2.2" 0.23 lbs.
30424 3/4" 2.2" 0.25 lbs.
30426 13/16" 2.5" 0.32 lbs.
30428 7/8" 2.5" 0.38 lbs.
30430 15/16" 2.8" 0.47 lbs.
30432 1" 2.8" 0.52 lbs.
ASME B107.1
3/8" DRIVE METRIC DEEP SOCKETS — 12 POINT
Item No. Size Length Weight
HW-1607M 7 mm 2.1" 0.10 lbs.
HW-1608M 8 mm 2.1" 0.10 lbs.
HW-1609M 9 mm 2.1" 0.11 lbs.
HW-1610M 10 mm 1.8" 0.11 lbs.
HW-1611M 11 mm 1.8" 0.12 lbs.
HW-1612M 12 mm 1.8" 0.12 lbs.
HW-1613M 13 mm 1.8" 0.16 lbs.
HW-1614M 14 mm 1.8" 0.16 lbs.
HW-1615M 15 mm 2.8" 0.24 lbs.
HW-1616M 16 mm 2.8" 0.24 lbs.
HW-1617M 17 mm 2.8" 0.27 lbs.
HW-1618M 18 mm 2.8" 0.27 lbs.
HW-1619M 19 mm 2.8" 0.31 lbs.
ASME B107.5M
3/8" DRIVE CROWFOOT• Satin Finish.
Item No. Size Length Weight
BCF-12 3/8" 1.2" 0.06 lbs.
BCF-14 7/16" 1.2" 0.06 lbs.
BCF-16 1/2" 1.4" 0.07 lbs.
BCF-18 9/16" 1.4" 0.08 lbs.
BCF-20 5/8" 1.6" 0.09 lbs.
BCF-22 11/16" 1.6" 0.10 lbs.
BCF-24 3/4" 1.7" 0.11 lbs.
BCF-26 13/16" 1.7" 0.11 lbs.
BCF-28 7/8" 1.8" 0.12 lbs.
BCF-32 1" 1.8" 0.14 lbs.
ASME B107.21
3 / 8 " D R I V E S O C K E T S & C R O W F O O T
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 107
Visit us at...www.stanleyproto.com108
SO
CK
ET
S&
AC
CE
SS
OR
IES
3/8" DRIVE CROWFOOT – METRIC• Satin Finish.
Item No. Size Length Weight
BCF-10M 10 mm 1.2" 0.06 lbs.
BCF-11M 11 mm 1.2" 0.07 lbs.
BCF-12M 12 mm 1.4" 0.07 lbs.
BCF-13M 13 mm 1.4" 0.07 lbs.
BCF-14M 14 mm 1.4" 0.09 lbs.
BCF-15M 15 mm 1.6" 0.09 lbs.
BCF-16M 16 mm 1.6" 0.09 lbs.
BCF-17M 17 mm 1.6" 0.09 lbs.
BCF-19M 19 mm 1.7" 0.11 lbs.
BCF-21M 21 mm 1.7" 0.11 lbs.
BCF-22M 22 mm 1.7" 0.12 lbs.
ASME 107.21
3/8" DRIVE SLOTTED SCREWDRIVER BITS
Item No. Description Length Weight
HW-9504 3/16" Wide Tip 2" 0.10 lbs.
HW-9505 1/4" Wide Tip 2" 0.10 lbs.
HW-9506 5/16" Wide Tip 2" 0.11 lbs.
3/8" DRIVE PHILLIPS® SCREWDRIVER BITS
Item No. Size Weight
HW-9450 No. 1 0.09 lbs.
HW-9451 No. 2 0.10 lbs.
HW-9452 No. 3 0.10 lbs.
HW-9453 No. 4 0.10 lbs.
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 108
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
SO
CK
ET
S&
AC
CE
SS
OR
IES
109Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
3/8" DRIVE SOCKETS, CROWFOOT, SCREWDRIVER BITS & IMPACT
3/8" DRIVE TORX® SOCKETS INTERNAL
Item No. Size Weight
TS-1340 T40 0.07 lbs.
TS-1345 T45 0.08 lbs.
TS-1347 T47 0.08 lbs.
TS-1350 T50 0.09 lbs.
TS-1355 T55 0.11 lbs.
3/8" DRIVE TAMPER-RESISTANT TORX® SOCKETS INTERNAL
Item No. Size Weight
TR-3340 T10 0.08 lbs.
TR-3345 T15 0.09 lbs.
TR-3350 T20 0.10 lbs.
3/8" DRIVE TORX® SOCKETS EXTERNAL
Item No. Size Weight
TS-2308 E8 0.06 lbs.
TS-2310 E10 0.08 lbs.
TS-2312 E12 0.08 lbs.
TS-2314 E14 0.09 lbs.
TS-2316 E16 0.12 lbs.
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 109
Visit us at...www.stanleyproto.com110
SO
CK
ET
S&
AC
CE
SS
OR
IES
3/8" DRIVE HEX BIT SOCKETS
Item No. Size Length Weight
HW-9442 1/8" 2.0" 0.10 lbs.
HW-9443 9/64" 2.0" 0.10 lbs.
HW-9444 5/32" 2.0" 0.11 lbs.
HW-9449 3/16" 2.0" 0.11 lbs.
HW-9448 7/32" 2.0" 0.11 lbs.
HW-9447 1/4" 2.0" 0.11 lbs.
HW-9446 5/16" 2.0" 0.11 lbs.
HW-9445 3/8" 2.0" 0.13 lbs.
3/8" DRIVE METRIC HEX BIT SOCKETS
Item No. Size Length Weight
HW-9404M 4 mm 2.0" 0.10 lbs.
HW-9405M 5 mm 2.0" 0.11 lbs.
HW-9406M 6 mm 2.0" 0.11 lbs.
HW-9407M 7 mm 2.0" 0.11 lbs.
HW-9408M 8 mm 2.0" 0.11 lbs.
HW-9410M 10 mm 2.0" 0.12 lbs.
3/8" DRIVE IMPACT SOCKETS — 6 POINT
Item No. Size Length Weight
U-1508 1/4" 1.1" 0.08 lbs.
U-1510 5/16" 1.1" 0.09 lbs.
U-1512 3/8" 1.1" 0.09 lbs.
U-1514 7/16" 1.1" 0.09 lbs.
U-1516 1/2" 1.1" 0.09 lbs.
U-1518 9/16" 1.1" 0.11 lbs.
U-1520 5/8" 1.1" 0.14 lbs.
U-1522 11/16" 1.1" 0.17 lbs.
U-1524 3/4" 1.1" 0.17 lbs.
ASME B107.2
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 110
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
SO
CK
ET
S&
AC
CE
SS
OR
IES
111Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
3 /8 " D R I V E S O C K E T S & I M P A C T S O C K E T S
3/8" DRIVE METRIC IMPACT SOCKETS — 6 POINT
Item No. Size Length Weight
U-1508M 8 mm 1.0" 0.07 lbs.
U-1509M 9 mm 1.0" 0.04 lbs.
U-1510M 10 mm 1.0" 0.05 lbs.
U-1512M 12 mm 1.1" 0.09 lbs.
U-1513M 13 mm 1.1" 0.10 lbs.
U-1514M 14 mm 1.1" 0.11 lbs.
U-1515M 15 mm 1.1" 0.12 lbs.
U-1517M 17 mm 1.1" 0.16 lbs.
U-1518M 18 mm 1.1" 0.18 lbs.
U-1519M 19 mm 1.1" 0.19 lbs.
ASME B107.33M
3/8" DRIVE DEEP IMPACT SOCKETS — 6 POINT
Item No. Size Length Weight
U-1610 5/16" 2.8" 0.20 lbs.
U-1612 3/8" 2.8" 0.20 lbs.
U-1614 7/16" 2.8" 0.18 lbs.
U-1616 1/2" 2.8" 0.20 lbs.
U-1618 9/16" 2.8" 0.24 lbs.
U-1620 5/8" 2.8" 0.30 lbs.
U-1622 11/16" 2.8" 0.37 lbs.
U-1624 3/4" 2.8" 0.38 lbs.
ASME B107.2
3/8" DRIVE METRIC DEEP IMPACT SOCKETS — 6 POINT
Item No. Size Length Weight
U-1608M 8 mm 2.8" 0.20 lbs.
U-1609M 9 mm 2.8" 0.21 lbs.
U-1610M 10 mm 2.8" 0.20 lbs.
U-1611M 11 mm 2.8" 0.18 lbs.
U-1612M 12 mm 2.8" 0.21 lbs.
U-1613M 13 mm 2.8" 0.21 lbs.
U-1614M 14 mm 2.8" 0.27 lbs.
U-1615M 15mm 2.8" 0.27 lbs.
U-1616M 16 mm 2.8" 0.29 lbs.
U-1617M 17 mm 2.8" 0.37 lbs.
U-1618M 18 mm 2.8" 0.39 lbs.
U-1619M 19 mm 2.8" 0.39 lbs.
ASME B107.33M
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 111
Visit us at...www.stanleyproto.com112
SO
CK
ET
S&
AC
CE
SS
OR
IES
1/2" DRIVE QUICK RELEASE RATCHET • Full polish.• Chrome plated positive grip ratchet.• 45 tooth design, double pawl. • 8.0 degrees of arc required for new “bite.”• Works easily in confined areas.• Knurled speed ring means you can start the fastener without turning the handle.
Item No. Description Length Weight
49946B 45 Tooth Double Pawl 10.1" 1.22 lbs.
49946BR Ratchet Renewal Kit 0.33 lbs.
ASME B107.10M
1/2" DRIVE ROUND HEAD REVERSIBLE RATCHET• Chrome plated positive grip ratchet.• 45 tooth design.• Works easily in confined areas.• Knurled speed ring means you can start the fastener without turning the handle.
Item No. Description Length Weight
49945B 45 Tooth 10.1" 1.34 lbs.
49945BR Ratchet Renewal Kit 0.37 lbs.
ASME B107.10M
1/2" DRIVE FLEX HANDLE
Item No. Length Weight
49988B 17.8" 1.76 lbs.
ASME B107.10M
1/2" DRIVE SPEEDER
Item No. Length Weight
49992 17.8" 1.76 lbs.
ASME B107.10M
1/2" DRIVE EXTENSIONS
Item No. Length Weight
49964 2" 0.21 lbs.
49966 5" 0.46 lbs.
49990 10" 0.90 lbs.
49972 19" 1.92 lbs.
ASME B107.10M
1/2" DRIVE ADAPTERS
Item No. Female/Male Length Weight
34965 1/2" to 3/8" 0.7" 0.13 lbs.
69992 1/2" to 3/4" 0.7" 0.25 lbs.
ASME B107.10M
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 112
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
SO
CK
ET
S&
AC
CE
SS
OR
IES
113Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1 / 2 " D R I V E R A T C H E T S & A C C E S S O R I E S
1/2" DRIVE UNIVERSAL JOINT
Item No. Length Weight
49978 2.7" 0.29 lbs.
ASME B107.10M
1/2" DRIVE DRAG LINK SOCKET• A sturdy screwdriver type socket with bit for drag links, drain plugs, slotted nuts
and screws. • Will fit any standard 1/2" square drive tool.
Item No. Length Weight
49979 0.94" wide 0.18 lbs.
1/2" DRIVE SPARK PLUG SOCKETS — 6 POINT• Rubber insert included to help grip socket plug and reduce breakage.
Item No. Size Length Weight
40326S 13/16" 2.7" 0.36 lbs.
40320S 5/8" 2.5" 0.22 lbs.
ASME B107.34M
1/2" DRIVE SOCKETS — 6 POINT
Item No. Size Length Weight
40612 3/8" 1.5" 0.10 lbs.
40614 7/16" 1.5" 0.11 lbs.
40616 1/2" 1.5" 0.13 lbs.
40618 9/16" 1.5" 0.14 lbs.
40620 5/8" 1.5" 0.14 lbs.
40622 11/16" 1.5" 0.19 lbs.
40624 3/4" 1.5" 0.19 lbs.
40626 13/16" 1.5" 0.19 lbs.
40628 7/8" 1.5" 0.24 lbs.
40630 15/16" 1.5" 0.26 lbs.
40632 1" 1.6" 0.30 lbs.
40634 1-1/16" 1.7" 0.35 lbs.
40636 1-1/8" 1.7" 0.42 lbs.
40640 1-1/4" 1.8" 0.48 lbs.
40642A 1-1/2" 2.3" 1.12 lbs.
ASME B107.1
1/2" DRIVE METRIC SOCKETS — 6 POINT
Item No. Size Length Weight
43010M 10 mm 1.5" 0.11 lbs.
43011M 11 mm 1.5" 0.11 lbs.
43012M 12 mm 1.5" 0.12 lbs.
43013M 13 mm 1.5" 0.12 lbs.
43014M 14 mm 1.5" 0.14 lbs.
43015M 15 mm 1.5" 0.16 lbs.
43017M 17 mm 1.5" 0.16 lbs.
43019M 19 mm 1.5" 0.20 lbs.
43021M 21 mm 1.5" 0.21 lbs.
43022M 22 mm 1.5" 0.25 lbs.
43023M 23 mm 1.5" 0.26 lbs.
43024M 24 mm 1.5" 0.31 lbs.
43027M 27 mm 1.7" 0.44 lbs.
ASME B107.5M
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 113
Visit us at...www.stanleyproto.com114
SO
CK
ET
S&
AC
CE
SS
OR
IES
1/2" DRIVE SOCKETS — 12 POINT
Item No. Size Length Weight
40112 3/8" 1.5" 0.11 lbs.
40114 7/16" 1.5" 0.11 lbs.
40116 1/2" 1.5" 0.12 lbs.
40118 9/16" 1.5" 0.12 lbs.
40120 5/8" 1.5" 0.12 lbs.
40122 11/16" 1.5" 0.16 lbs.
40124 3/4" 1.5" 0.16 lbs.
40126 13/16" 1.5" 0.18 lbs.
40128 7/8" 1.5" 0.22 lbs.
40130 15/16" 1.5" 0.28 lbs.
40132 1" 1.6" 0.30 lbs.
40134 1-1/16" 1.7" 0.32 lbs.
40136 1-1/8" 1.7" 0.39 lbs.
40138 1-3/16" 1.8" 0.70 lbs.
40140 1-1/4" 1.8" 0.70 lbs.
40144A 1-1/2" 2.3" 0.70 lbs.
ASME B107.1
1/2" DRIVE METRIC SOCKETS — 12 POINT
Item No. Size Length Weight
42010M 10 mm 1.5" 0.10 lbs.
42011M 11 mm 1.5" 0.11 lbs.
42012M 12 mm 1.5" 0.12 lbs.
42013M 13 mm 1.5" 0.12 lbs.
42014M 14 mm 1.5" 0.12 lbs.
42015M 15 mm 1.5" 0.12 lbs.
42016M 16 mm 1.5" 0.12 lbs.
42017M 17 mm 1.5" 0.17 lbs.
42018M 18 mm 1.5" 0.17 lbs.
42019M 19 mm 1.5" 0.18 lbs.
42020M 20 mm 1.5" 0.19 lbs.
42021M 21 mm 1.5" 0.20 lbs.
42022M 22 mm 1.5" 0.25 lbs.
42023M 23 mm 1.5" 0.26 lbs.
42024M 24 mm 1.5" 0.28 lbs.
42025M 25 mm 1.6" 0.30 lbs.
42026M 26 mm 1.6" 0.33 lbs.
42027M 27 mm 1.7" 0.37 lbs.
42028M 28 mm 1.7" 0.44 lbs.
42030M 30 mm 1.7" 0.48 lbs.
42032M 32 mm 1.8" 0.50 lbs.
42036M 36 mm 2.2" 0.96 lbs.
ASME B107.5M
1/2" DRIVE DEEP SOCKETS — 6 POINT
Item No. Size Length Weight
40416 1/2" 3.1" 0.27 lbs.
40418 9/16" 3.1" 0.29 lbs.
40420 5/8" 3.1" 0.27 lbs.
40422 11/16" 3.1" 0.32 lbs.
40424 3/4" 3.1" 0.41 lbs.
40426 13/16" 3.1" 0.42 lbs.
40428 7/8" 3.1" 0.50 lbs.
40430 15/16" 3.1" 0.54 lbs.
40432 1" 3.1" 0.62 lbs.
40434 1-1/16" 3.1" 0.76 lbs.
40436 1-1/8" 3.1" 0.79 lbs.
ASME B107.1
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 114
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
SO
CK
ET
S&
AC
CE
SS
OR
IES
115Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1 /2 " D R I V E S O C K E T S
1/2" DRIVE DEEP METRIC SOCKETS — 6 POINT
Item No. Size Length Weight
45010M 10 mm 3.1" 0.23 lbs.
45011M 11 mm 3.1" 0.28 lbs.
45012M 12 mm 3.1" 0.28 lbs.
45013M 13 mm 3.1" 0.28 lbs.
45014M 14 mm 3.1" 0.28 lbs.
45015M 15 mm 3.1" 0.28 lbs.
45016M 16 mm 3.1" 0.32 lbs.
45017M 17 mm 3.1" 0.33 lbs.
45018M 18 mm 3.1" 0.36 lbs.
45019M 19 mm 3.1" 0.37 lbs.
45020M 20 mm 3.1" 0.46 lbs.
45021M 21 mm 3.1" 0.47 lbs.
45022M 22 mm 3.1" 0.51 lbs.
45023M 23 mm 3.1" 0.51 lbs.
45024M 24 mm 3.1" 0.51 lbs.
45025M 25 mm 3.1" 0.62 lbs.
45026M 26 mm 3.1" 0.63 lbs.
45027M 27 mm 3.1" 0.65 lbs.
ASME B107.5M
1/2" DRIVE DEEP SOCKETS — 12 POINT
Item No. Size Length Weight
40316 1/2" 3.1" 0.26 lbs.
40318 9/16" 3.1" 0.26 lbs.
40320 5/8" 3.1" 0.26 lbs.
40322 11/16" 3.1" 0.33 lbs.
40324 3/4" 3.1" 0.39 lbs.
40326 13/16" 3.1" 0.40 lbs.
40328 7/8" 3.1" 0.47 lbs.
40330 15/16" 3.1" 0.56 lbs.
40332 1" 3.1" 0.58 lbs.
40334 1-1/16" 3.1" 0.71 lbs.
40336 1-1/8" 3.1" 0.72 lbs.
ASME B107.1
1/2" DRIVE DEEP METRIC SOCKETS — 12 POINT
Item No. Size Length Weight
44010M 10 mm 3.1" 0.25 lbs.
44011M 11 mm 3.1" 0.31 lbs.
44012M 12 mm 3.1" 0.27 lbs.
44013M 13 mm 3.1" 0.27 lbs.
44014M 14 mm 3.1" 0.29 lbs.
44015M 15 mm 3.1" 0.25 lbs.
44016M 16 mm 3.1" 0.26 lbs.
44017M 17 mm 3.1" 0.33 lbs.
44018M 18 mm 3.1" 0.38 lbs.
44019M 19 mm 3.1" 0.41 lbs.
44020M 20 mm 3.1" 0.44 lbs.
44021M 21 mm 3.1" 0.39 lbs.
44022M 22 mm 3.1" 0.50 lbs.
44023M 23 mm 3.1" 0.56 lbs.
44024M 24 mm 3.1" 0.54 lbs.
44025M 25 mm 3.1" 0.63 lbs.
44026M 26 mm 3.1" 0.60 lbs.
44027M 27 mm 3.1" 0.55 lbs.
ASME B107.5M
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 115
Visit us at...www.stanleyproto.com116
SO
CK
ET
S&
AC
CE
SS
OR
IES
1/2" DRIVE TORX® SOCKETS
Item No. Description Size Weight
TS-1460 Internal T60 0.25 lbs.
TS-2418 External E18 0.27 lbs.
1/2" DRIVE WHEEL IMPACT LUG SOCKET KIT — 6 POINT• To remove or install most wheel lugs with a 1/2" drive impact gun.• Kit includes a double-end socket with a 3/4" opening on one end and 13/16" on the
other and a 2-5/8" long extension bar.
Item No. Description Weight
UW-1505 Kit (Socket and Extension) 0.91 lbs.
UW-1500 Socket Only 2.8" 0.57 lbs.
UW-30 3" Extension Only 0.28 lbs.
1/2" DRIVE FRONT WHEEL DRIVE DEEP SOCKETFOR GM FRONT WHEEL AXLE NUTS — 6 POINT
Item No. Size Length Weight
UWP-430M 30 mm 3.5" 3.90 lbs.
UWP-436M 36 mm 3.5" 4.20 lbs.
1/2" DRIVE IMPACT SOCKETS — 6 POINT
Item No. Size Length Weight
UW-1612 3/8" 1.5" 0.18 lbs.
UW-1614 7/16" 1.5" 0.18 lbs.
UW-1616 1/2" 1.5" 0.19 lbs.
UW-1618 9/16" 1.5" 0.19 lbs.
UW-1620 5/8" 1.5" 0.22 lbs.
UW-1622 11/16" 1.5" 0.22 lbs.
UW-1624 3/4" 1.5" 0.26 lbs.
UW-1626 13/16" 1.6" 0.31 lbs.
UW-1628 7/8" 1.6" 0.40 lbs.
UW-1630 15/16" 1.8" 0.44 lbs.
UW-1632 1" 1.8" 0.53 lbs.
UW-1634 1-1/16" 1.8" 0.56 lbs.
UW-1636 1-1/8" 2.0" 0.66 lbs.
UW-1638 1-3/16" 2.0" 0.79 lbs.
UW-1640 1-1/4" 2.0" 0.82 lbs.
ASME B107.2
Torx® is a registered trademark of Textron.
TS-1460 TS-2418
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 116
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
SO
CK
ET
S&
AC
CE
SS
OR
IES
117Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1 /2 " D R I V E S O C K E T S
1/2" DRIVE METRIC IMPACT SOCKETS — 6 POINT
Item No. Size Length Weight
UW-610M 10 mm 1.5" 0.19 lbs.
UW-611M 11 mm 1.5" 0.18 lbs.
UW-612M 12 mm 1.5" 0.19 lbs.
UW-613M 13 mm 1.5" 0.17 lbs.
UW-614M 14 mm 1.5" 0.18 lbs.
UW-615M 15 mm 1.5" 0.19 lbs.
UW-616M 16 mm 1.5" 0.20 lbs.
UW-617M 17 mm 1.5" 0.23 lbs.
UW-618M 18 mm 1.5" 0.24 lbs.
UW-619M 19 mm 1.5" 0.25 lbs.
UW-620M 20 mm 1.6" 0.29 lbs.
UW-621M 21 mm 1.6" 0.33 lbs.
UW-622M 22 mm 1.6" 0.35 lbs.
UW-624M 24 mm 1.6" 0.44 lbs.
UW-627M 27 mm 2.0" 0.59 lbs.
ASME B107.33M
1/2" DRIVE DEEP IMPACT SOCKETS — 6 POINT
Item No. Size Length Weight
UW-1512 3/8" 3.3" 0.38 lbs.
UW-1514 7/16" 3.3" 0.43 lbs.
UW-1516 1/2" 3.3" 0.44 lbs.
UW-1518 9/16" 3.3" 0.46 lbs.
UW-1520 5/8" 3.3" 0.46 lbs.
UW-1522 11/16" 3.3" 0.47 lbs.
UW-1524 3/4" 3.3" 0.50 lbs.
UW-1526 13/16" 3.3" 0.61 lbs.
UW-1528 7/8" 3.5" 0.72 lbs.
UW-1530 15/16" 3.5" 0.83 lbs.
UW-1532 1" 3.5" 1.02 lbs.
UW-1534 1-1/16" 3.5" 1.03 lbs.
UW-1536 1-1/8" 3.5" 1.04 lbs.
ASME B107.2
1/2" DRIVE METRIC DEEP IMPACT SOCKETS — 6 POINT
Item No. Size Length Weight
UW-510M 10 mm 3.2" 0.43 lbs.
UW-511M 11 mm 3.3" 0.43 lbs.
UW-512M 12 mm 3.3" 0.43 lbs.
UW-513M 13 mm 3.3" 0.46 lbs.
UW-514M 14 mm 3.3" 0.44 lbs.
UW-515M 15 mm 3.3" 0.40 lbs.
UW-516M 16 mm 3.3" 0.37 lbs.
UW-517M 17 mm 3.3" 0.43 lbs.
UW-518M 18 mm 3.3" 0.412 lbs.
UW-519M 19 mm 3.3" 0.48 lbs.
UW-520M 20 mm 3.3" 0.57 lbs.
UW-521M 21 mm 3.3" 0.63 lbs.
UW-522M 22 mm 3.3" 0.68 lbs.
UW-524M 24 mm 3.3" 0.71 lbs.
UW-526M 26 mm 3.5" 1.04 lbs.
UW-527M 27 mm 3.5" 1.15 lbs.
ASME B107.33M
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 117
Visit us at...www.stanleyproto.com118
SO
CK
ET
S&
AC
CE
SS
OR
IES
1/2" DRIVE IMPACT EXTENSIONS
Item No. Size Length Weight
UW-30 1/2" 3" 0.28 lbs.
UW-24 1/2" 5" 0.45 lbs.
UW-25 1/2" 10" 0.99 lbs.
ASME B107.2
1/2" DRIVE IMPACT UNIVERSAL JOINT• Designed to provide flexibility when working in tight restricted areas. • Special “Ball Type Joint” gives this Universal Joint the added strength
necessary for its rugged application. • Black oxide finish.
Item No. Size Length Weight
49976 1/2" 3" 0.57 lbs.
ASME B107.2
3/4" DRIVE ROUND HEAD REVERSIBLE RATCHET• A positive-grip Ratchet the gives you extra strength for turning tough nuts. • Precision engineered, 45-tooth mechanism permits close acting operation. • Head is 2-3/8" in diameter.
Item No. Description Length Weight
69945B 45 Tooth 20.3" 5.27 lbs.
69945BR Ratchet Renewal Kit 0.78 lbs.
ASME B107.10M
3/4" DRIVE HEAVY-DUTY FLEX HANDLE
Item No. Length Weight
69998 19" 4.20 lbs.
ASME B107.10M
3/4" DRIVE HEAVY-DUTY SLIDE TEE HANDLE• For driving manually operated sockets.• Large leverage handle for comfortable application of force.• Movable/slidable squaredrive.• Final tightening can be done with both hands.
Item No. Length Weight
69997 20" 3.20 lbs.
ASME B107.10M
3/4" DRIVE HEAVY-DUTY EXTENSIONS
Item No. Length Weight
69993 4" 0.87 lbs.
69995 8" 1.36 lbs.
69994 16" 2.43 lbs.
ASME B107.10M
3/4" DRIVE HEAVY-DUTY ADAPTERS
Item No. Female/Male Length Weight
49991 3/4" to 1/2" 1.9" 0.28 lbs.
ASME B107.10M
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 118
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
SO
CK
ET
S&
AC
CE
SS
OR
IES
119Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1/2" DRIVE SOCKETS, 3/4" DRIVE RATCHETS & ACCESSORIES
3/4" DRIVE REDUCING ADAPTER• Permits use of 3/4" drive sockets with 1" drive tool.
Item No. Female/Male Length Weight
69990 1" to 3/4" 3" 1.33 lbs.
ASME B107.10M
3/4" DRIVE HEAVY-DUTY SOCKETS — 12 POINT
Item No. Size Length Weight
60026A 3/4" 1.9" 0.32 lbs.
60027A 13/16" 1.9" 0.38 lbs.
60028 7/8" 1.9" 0.42 lbs.
60030 15/16" 1.9" 0.51 lbs.
60032 1" 1.9" 0.59 lbs.
60034 1-1/16" 1.9" 0.63 lbs.
60036 1-1/8" 2.2" 0.68 lbs.
60038 1-3/16" 2.2" 0.60 lbs.
60040 1-1/4" 2.3" 0.95 lbs.
60042 1-5/16" 2.3" 0.90 lbs.
60044 1-3/8" 2.3" 0.86 lbs.
60046 1-7/16" 2.4" 1.10 lbs.
60048 1-1/2" 2.4" 1.06 lbs.
60050 1-9/16" 2.6" 1.45 lbs.
60052 1-5/8" 2.6" 1.36 lbs.
60054 1-11/16" 2.7" 1.57 lbs.
60056 1-3/4" 2.7" 1.49 lbs.
60058 1-13/16" 2.9" 1.81 lbs.
60060 1-7/8" 2.9" 1.81 lbs.
60064 2" 3.1" 2.31 lbs.
60068 2-1/8" 3.2" 2.66 lbs.
60070 2-3/16" 3.2" 2.91 lbs.
60072 2-1/4" 3.4" 3.15 lbs.
60076 2-3/8" 3.6" 3.84 lbs.
ASME B107.1
3/4" DRIVE METRIC HEAVY-DUTY SOCKETS — 12 POINT
Item No. Size Length Weight
61019M 19 mm 1.9" 0.36 lbs.
61021M 21 mm 1.9" 0.37 lbs.
61022M 22 mm 1.9" 0.39 lbs.
61023M 23 mm 1.9" 0.50 lbs.
61024M 24 mm 1.9" 0.51 lbs.
61025M 25 mm 2.0" 0.53 lbs.
61026M 26 mm 2.0" 0.54 lbs.
61027M 27 mm 2.0" 0.61 lbs.
61028M 28 mm 2.2" 0.68 lbs.
61029M 29 mm 2.2" 0.69 lbs.
61030M 30 mm 2.2" 0.71 lbs.
61031M 31 mm 2.2" 0.77 lbs.
61032M 32 mm 2.2" 0.80 lbs.
61035M 35 mm 2.3" 0.86 lbs.
61036M 36 mm 2.4" 1.11 lbs.
61038M 38 mm 2.4" 1.22 lbs.
61041M 41 mm 2.6" 1.38 lbs.
61042M 42 mm 2.7" 1.81 lbs.
61046M 46 mm 2.9" 1.87 lbs.
61050M 50 mm 3.1" 2.36 lbs.
61054M 54 mm 3.2" 2.43 lbs.
61055M 55 mm 3.2" 2.58 lbs.
ASME B107.5M
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 119
Visit us at...www.stanleyproto.com120
SO
CK
ET
S&
AC
CE
SS
OR
IES
3 /4" D R I V E S O C K E T S
3/4" DRIVE IMPACT SOCKETS — 6 POINT
Item No. Size Length Weight
UW-2424 3/4" 1.9" 0.75 lbs.
UW-2426 13/16" 1.9" 0.75 lbs.
UW-2428 7/8" 2.0" 0.75 lbs.
UW-2430 15/16" 2.0" 0.78 lbs.
UW-2432 1" 2.1" 0.78 lbs.
UW-2434 1-1/16" 2.1" 0.78 lbs.
UW-2436 1-1/8" 2.2" 0.89 lbs.
UW-2438 1-3/16" 2.2" 1.02 lbs.
UW-2440 1-1/4" 2.2" 1.14 lbs.
UW-2442 1-5/16" 2.2" 1.25 lbs.
UW-2444 1-3/8" 2.3" 1.27 lbs.
UW-2446 1-7/16" 2.3" 1.42 lbs.
UW-2448 1-1/2" 2.3" 1.51 lbs.
ASME B107.2
3/4" DRIVE DEEP IMPACT SOCKETS — 6 POINT
Item No. Size Length Weight
UW-2624 3/4" 3.3" 1.30 lbs.
UW-2626 13/16" 3.3" 1.30 lbs.
UW-2628 7/8" 3.3" 1.35 lbs.
UW-2630 15/16" 3.3" 1.31 lbs.
UW-2632 1" 3.3" 1.23 lbs.
UW-2634 1-1/16" 3.3" 1.17 lbs.
UW-2636 1-1/8" 3.3" 1.27 lbs.
UW-2638 1-3/16" 3.3" 1.47 lbs.
UW-2640 1-1/4" 3.3" 1.64 lbs.
UW-2642 1-5/16" 3.3" 1.78 lbs.
UW-2644 1-3/8" 3.3" 1.87 lbs.
UW-2646 1-7/16" 3.5" 2.12 lbs.
UW-2648 1-1/2" 3.5" 2.45 lbs.
ASME B107.2
BUDD WHEEL SOCKETS — 6 POINT• Designed for quick application and removal of Budd type wheels. • Each socket has two openings, 13/16" square and 1-1/2" hex, eliminating the need
for two separate sockets.
Item No. Drive Size Length Weight
UWP-660 3/4" 4.0" 2.00 lbs.
UWP-1460 1" 4.0" 2.00 lbs.
Sockets & Accessories.qxd 6/24/05 1:35 PM Page 120
WRENCHES.FOR AUTOMOTIVE AND LIGHT-INDUSTRIAL USE.
BlackhawkTM by Proto® wrenches are available in sets and as singles, in many styles and sizes, finished in
full polish, satin and black. Each wrench is corrosion resistant and easy to clean.
The torque wrench line is manufactured to precise specifications for maximum performance in torque
applications, available in two drive sizes with several torque ranges.
Wrenches.qxd 6/24/05 1:41 PM Page 121
18 PIECE FULL POLISH COMBINATION WRENCH SET–STANDARD AND METRIC• Weight: 11.00 lbs.
Item No. Contents Size
BW-9718NB BW-1156FP 1/4"
BW-1159FP 5/16"
BW-1160FP 3/8"
BW-1161FP 7/16"
BW-1162FP 1/2"
BW-1163FP 9/16"
BW-1164FP 5/8"
BW-1165FP 11/16"
BW-1166FP 3/4"
BW-1110MFP 10 mm
BW-1111MFP 11 mm
BW-1112MFP 12 mm
BW-1113MFP 13 mm
BW-1114MFP 14 mm
BW-1115MFP 15 mm
BW-1116MFP 16 mm
BW-1117MFP 17 mm
BW-1118MFP 18 mm
Wrench Roll
14 PIECE FULL POLISH COMBINATION WRENCH SET• Weight: 9.90 lbs.
Item No. Contents Size
BW-14PT BW-1159FP 5/16"
BW-1160FP 3/8"
BW-1161FP 7/16"
BW-1162FP 1/2"
BW-1163FP 9/16"
BW-1164FP 5/8"
BW-1165FP 11/16"
BW-1166FP 3/4"
BW-1167AFP 13/16"
BW-1167FP 7/8"
BW-1168FP 15/16"
BW-1170FP 1"
BW-1172FP 1-1/8"
BW-1173FP 1-1/4"
Wrench Roll
Visit us at...www.stanleyproto.com122
WR
EN
CH
ES
MADE IN
UUUU SSSS AAAA
Wrenches.qxd 6/24/05 1:41 PM Page 122
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
WR
EN
CH
ES
14 PIECE FULL POLISH COMBINATION WRENCH SET – METRIC• Weight: 9.00 lbs.
Item No. Contents Size
BW-14MPT BW-1107MFP 7 mm
BW-1108MFP 8 mm
BW-1109MFP 9 mm
BW-1110MFP 10 mm
BW-1111MFP 11 mm
BW-1112MFP 12 mm
BW-1113MFP 13 mm
BW-1114MFP 14 mm
BW-1115MFP 15 mm
BW-1116MFP 16 mm
BW-1117MFP 17 mm
BW-1118MFP 18 mm
BW-1119MFP 19 mm
BW-1120MFP 20 mm
Wrench Roll
11 PIECE FULL POLISH COMBINATION WRENCH SET• Weight: 8.70 lbs.
Item No. Contents Size
BW-11PT BW-1160FP 3/8"
BW-1161FP 7/16"
BW-1162FP 1/2"
BW-1163FP 9/16"
BW-1164FP 5/8"
BW-1165FP 11/16"
BW-1166FP 3/4"
BW-1167AFP 13/16"
BW-1167FP 7/8"
BW-1168FP 15/16"
BW-1170FP 1"
Wrench Roll
11 PIECE FULL POLISH COMBINATION WRENCH SET – METRIC• Weight: 8.70 lbs.
Item No. Contents Size
BW-11P BW-1107MFP 7 mm
BW-1109MFP 9 mm
BW-1110MFP 10 mm
BW-1111MFP 11 mm
BW-1112MFP 12 mm
BW-1113MFP 13 mm
BW-1114MFP 14 mm
BW-1115MFP 15 mm
BW-1117MFP 17 mm
BW-1118MFP 18 mm
BW-1119MFP 19 mm
Wrench Roll
123Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
C O M B I N A T I O N S E T S
Wrenches.qxd 6/24/05 1:41 PM Page 123
Visit us at...www.stanleyproto.com124
WR
EN
CH
ES
MADE IN
UUUU SSSS AAAA
9 PIECE FULL POLISH COMBINATION WRENCH SET• Weight: 6.80 lbs.
Item No. Contents Size
9609PNB BW-1156FP 1/4"
BW-1159FP 5/16"
BW-1160FP 3/8"
BW-1161FP 7/16"
BW-1162FP 1/2"
BW-1163FP 9/16"
BW-1164FP 5/8"
BW-1165FP 11/16"
BW-1166FP 3/4"
Wrench Roll
9 PIECE FULL POLISH COMBINATION WRENCH SET – METRIC• Weight: 6.80 lbs.
Item No. Contents Size
9609MNB BW-1110MFP 10 mm
BW-1111MFP 11 mm
BW-1112MFP 12 mm
BW-1113MFP 13 mm
BW-1114MFP 14 mm
BW-1115MFP 15 mm
BW-1116MFP 16 mm
BW-1117MFP 17 mm
BW-1118MFP 18 mm
Wrench Roll
FULL POLISH COMBINATION WRENCH
Item No. Size Length Weight
BW-1156FP 1/4" 4.0" 0.04 lbs.
BW-1159FP 5/16" 4.5" 0.06 lbs.
BW-1160FP 3/8" 5.1" 0.11 lbs.
BW-1161FP 7/16" 5.7" 0.13 lbs.
BW-1162FP 1/2" 6.1" 0.20 lbs.
BW-1163FP 9/16" 7.1" 0.20 lbs.
BW-1164FP 5/8" 7.9" 0.30 lbs.
BW-1165FP 11/16" 8.7" 0.30 lbs.
BW-1166FP 3/4" 9.6" 0.60 lbs.
BW-1167AFP 13/16" 10.6" 0.60 lbs.
BW-1167FP 7/8" 11.6" 0.65 lbs.
BW-1168FP 15/16" 12.5" 0.70 lbs.
BW-1170FP 1" 13.4" 0.80 lbs.
BW-1171FP 1-1/16" 14.7" 0.90 lbs.
BW-1172FP 1-1/8" 15.5" 1.10 lbs.
BW-1173FP 1-1/4" 16.8" 1.40 lbs.
BW-1174FP 1-5/16" 17.6" 2.10 lbs.
BW-1175FP 1-3/8" 18.5" 2.70 lbs.
BW-1176FP 1-7/16" 19.3" 2.50 lbs.
BW-1177FP 1-1/2" 20.2" 3.40 lbs.
ASME B107.100
Wrenches.qxd 6/24/05 1:41 PM Page 124
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
WR
EN
CH
ES
125Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
C O M B I N A T I O N S E T S & S I N G L E S
FULL POLISH COMBINATION WRENCH – METRIC
Item No. Size Length Weight
BW-1106MFP 6 mm 4.0" 0.04 lbs.
BW-1107MFP 7 mm 4.3" 0.05 lbs.
BW-1108MFP 8 mm 4.5" 0.07 lbs.
BW-1109MFP 9 mm 4.8" 0.09 lbs.
BW-1110MFP 10 mm 5.0" 0.10 lbs.
BW-1111MFP 11 mm 5.8" 0.14 lbs.
BW-1112MFP 12 mm 6.1" 0.14 lbs.
BW-1113MFP 13 mm 6.5" 0.20 lbs.
BW-1114MFP 14 mm 7.1" 0.25 lbs.
BW-1115MFP 15 mm 7.6" 0.29 lbs.
BW-1116MFP 16 mm 8.1" 0.37 lbs.
BW-1117MFP 17 mm 8.7" 0.37 lbs.
BW-1118MFP 18 mm 9.2" 0.45 lbs.
BW-1119MFP 19 mm 9.7" 0.47 lbs.
BW-1120MFP 20 mm 10.2" 0.53 lbs.
BW-1121MFP 21 mm 10.5" 0.65 lbs.
BW-1122MFP 22 mm 11.6" 0.75 lbs.
BW-1124MFP 24 mm 12.5" 0.92 lbs.
BW-1125MFP 25 mm 13.5" 1.05 lbs.
BW-1126MFP 26 mm 13.5" 1.00 lbs.
BW-1127MFP 27 mm 15.0" 1.35 lbs.
BW-1128MFP 28 mm 15.4" 1.53 lbs.
BW-1130MFP 30 mm 15.4" 1.53 lbs.
BW-1132MFP 32 mm 17.0" 2.08 lbs.
ASME B107.100
17 PIECE SATIN FINISH COMBINATION WRENCH SET • Weight: 10.50 lbs.
Item No. Contents Size
MF-017 BW-1156 1/4"
BW-1159 5/16"
BW-1160 3/8"
BW-1161 7/16"
BW-1162 1/2"
BW-1163 9/16"
BW-1164 5/8"
BW-1165 11/16"
BW-1166 3/4"
BW-1167A 13/16"
BW-1167 7/8"
BW-1168 15/16"
BW-1170 1"
BW-1171 1-1/16"
BW-1172 1-1/8"
BW-1173 1-1/4"
BW-1174 1-5/16"
Wrench Roll
Wrenches.qxd 6/24/05 1:41 PM Page 125
17 PIECE SATIN FINISH COMBINATION WRENCH SET – METRIC• Weight: 10.50 lbs.
Item No. Contents Size
MF-017M BW-1106M 6 mmBW-1107M 7 mmBW-1108M 8 mmBW-1109M 9 mmBW-1110M 10 mmBW-1111M 11 mmBW-1112M 12 mmBW-1113M 13 mmBW-1114M 14 mmBW-1115M 15 mmBW-1116M 16 mmBW-1117M 17 mmBW-1118M 18 mmBW-1119M 19 mmBW-1120M 20 mmBW-1121M 21 mmBW-1122M 22 mmWrench Roll
14 PIECE SATIN FINISH COMBINATION WRENCH SET• Weight: 9.00 lbs.
Item No. Contents Size
MF-014 BW-1159 5/16"BW-1160 3/8"BW-1161 7/16"BW-1162 1/2"BW-1163 9/16"BW-1164 5/8"BW-1165 11/16"BW-1166 3/4"BW-1167A 13/16"BW-1167 7/8"BW-1168 15/16"BW-1170 1"BW-1172 1-1/8"BW-1173 1-1/4"Wrench Roll
11 PIECE SATIN FINISH COMBINATION WRENCH SET• Weight: 4.00 lbs.
Item No. Contents Size
MF-011 BW-1156 1/4"BW-1160 3/8"BW-1161 7/16"BW-1162 1/2"BW-1163 9/16"BW-1164 5/8"BW-1165 11/16"BW-1166 3/4"BW-1167A 13/16"BW-1167 7/8"BW-1168 15/16"Wrench Roll
Visit us at...www.stanleyproto.com126
WR
EN
CH
ES
MADE IN
UUUU SSSS AAAA
Wrenches.qxd 6/24/05 1:41 PM Page 126
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
WR
EN
CH
ES
11 PIECE SATIN FINISH COMBINATION WRENCH SET – METRIC• Weight: 2.40 lbs.
Item No. Contents Size
MF-011M BW-1106M 6 mmBW-1107M 7 mmBW-1108M 8 mmBW-1109M 9 mmBW-1110M 10 mmBW-1111M 11 mmBW-1112M 12 mmBW-1113M 13 mmBW-1114M 14 mmBW-1115M 15 mmBW-1116M 16 mmWrench Roll
8 PIECE SATIN FINISH COMBINATION WRENCH SET• Weight: 2.00 lbs.
Item No. Contents Size
MF-008 BW-1156 1/4"BW-1159 5/16"BW-1160 3/8"BW-1161 7/16"BW-1162 1/2"BW-1163 9/16"BW-1164 5/8"BW-1166 3/4"Wrench Roll
8 PIECE SATIN FINISH COMBINATION WRENCH SET – METRIC• Weight: 1.90 lbs.
Item No. Contents Size
MF-008M BW-1108M 8 mmBW-1109M 9 mmBW-1110M 10 mmBW-1111M 11 mmBW-1112M 12 mmBW-1114M 14 mmBW-1117M 17 mmBW-1119M 19 mmWrench Roll
6 PIECE SATIN FINISH COMBINATION WRENCH SET• Weight: 1.70 lbs.
Item No. Contents Size
MF-006 BW-1160 3/8"BW-1161 7/16"BW-1162 1/2"BW-1163 9/16"BW-1164 5/8"BW-1166 3/4"Wrench Roll
127Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
C O M B I N A T I O N S E T S
Wrenches.qxd 6/24/05 1:41 PM Page 127
SATIN FINISH COMBINATION WRENCH–12 POINT
Item No. Size Length Weight
BW-1156 1/4" 4.0" 0.04 lbs.
BW-1159 5/16" 4.4" 0.06 lbs.
BW-1160 3/8" 5.1" 0.11 lbs.
BW-1161 7/16" 5.8" 0.13 lbs.
BW-1162 1/2" 6.4" 0.18 lbs.
BW-1163 9/16" 7.1" 0.25 lbs.
BW-1164 5/8" 7.9" 0.30 lbs.
BW-1165 11/16" 8.8" 0.39 lbs.
BW-1166 3/4" 9.7" 0.47 lbs.
BW-1167A 13/16" 10.6" 0.66 lbs.
BW-1167 7/8" 11.6" 0.78 lbs.
BW-1168 15/16" 12.6" 0.94 lbs.
BW-1170 1" 13.5" 1.02 lbs.
BW-1171 1-1/16" 14.7" 1.29 lbs.
BW-1172 1-1/8" 15.5" 1.57 lbs.
BW-1173 1-1/4" 16.8" 1.91 lbs.
BW-1174 1-5/16" 17.6" 2.61 lbs.
BW-1175 1-3/8" 18.5" 2.63 lbs.
BW-1176 1-7/16" 19.4" 3.45 lbs.
BW-1177 1-1/2" 20.3" 3.43 lbs.
ASME B107.100
SATIN FINISH COMBINATION WRENCH–12 POINT – METRIC
Item No. Size Length Weight
BW-1106M 6 mm 4.0" 0.04 lbs.
BW-1107M 7 mm 4.2" 0.05 lbs.
BW-1108M 8 mm 4.4" 0.07 lbs.
BW-1109M 9 mm 4.8" 0.09 lbs.
BW-1110M 10 mm 5.1" 0.10 lbs.
BW-1111M 11 mm 5.8" 0.14 lbs.
BW-1112M 12 mm 6.1" 0.14 lbs.
BW-1113M 13 mm 6.4" 0.20 lbs.
BW-1114M 14 mm 7.1" 0.25 lbs.
BW-1115M 15 mm 7.5" 0.29 lbs.
BW-1116M 16 mm 7.9" 0.37 lbs.
BW-1117M 17 mm 8.8" 0.37 lbs.
BW-1118M 18 mm 9.2" 0.45 lbs.
BW-1119M 19 mm 9.7" 0.47 lbs.
BW-1120M 20 mm 10.1" 0.53 lbs.
BW-1121M 21 mm 10.6" 0.65 lbs.
BW-1122M 22 mm 11.6" 0.75 lbs.
BW-1124M 24 mm 12.6" 0.92 lbs.
BW-1125M 25 mm 13.5" 1.05 lbs.
BW-1126M 26 mm 13.5" 1.00 lbs.
BW-1127M 27 mm 14.7" 1.35 lbs.
BW-1128M 28 mm 15.5" 1.53 lbs.
BW-1130M 30 mm 15.5" 1.53 lbs.
BW-1132M 32 mm 16.8" 2.08 lbs.
ASME B107.100
Visit us at...www.stanleyproto.com128
WR
EN
CH
ES
MADE IN
UUUU SSSS AAAA
Wrenches.qxd 6/24/05 1:41 PM Page 128
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
WR
EN
CH
ES
14 PIECE BLACK FINISH COMBINATION WRENCH SET • Weight: 11.00 lbs.
Item No. Contents Size
BL-014 BW-1160B 3/8"
BW-1161B 7/16"
BW-1162B 1/2"
BW-1163B 9/16"
BW-1164B 5/8"
BW-1165B 11/16"
BW-1166B 3/4"
BW-1167AB 13/16"
BW-1167B 7/8"
BW-1168B 15/16"
BW-1170B 1"
BW-1171B 1-1/16"
BW-1172B 1-1/8"
BW-1173B 1-1/4"
Wrench Roll
14 PIECE BLACK FINISH COMBINATION WRENCH SET – METRIC• Weight: 11.00 lbs.
Item No. Contents Size
BL-014M BW-1107MB 7 mm
BW-1108MB 8 mm
BW-1109MB 9 mm
BW-1110MB 10 mm
BW-1111MB 11 mm
BW-1112MB 12 mm
BW-1113MB 13 mm
BW-1114MB 14 mm
BW-1115MB 15 mm
BW-1116MB 16 mm
BW-1117MB 17 mm
BW-1118MB 18 mm
BW-1119MB 19 mm
BW-1120MB 20 mm
Wrench Roll
9 PIECE BLACK FINISH COMBINATION WRENCH SET • Weight: 1.90 lbs.
Item No. Contents Size
BL-009 BW-1156B 1/4"
BW-1159B 5/16"
BW-1160B 3/8"
BW-1161B 7/16"
BW-1162B 1/2"
BW-1163B 9/16"
BW-1164B 5/8"
BW-1165B 11/16"
BW-1166B 3/4"
Wrench Roll
129Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
C O M B I N A T I O N S E T S & S I N G L E S
Wrenches.qxd 6/24/05 1:41 PM Page 129
9 PIECE BLACK FINISH COMBINATION WRENCH SET – METRIC• Weight: 1.90 lbs.
Item No. Contents Size
BL-009M BW-1110MB 10 mm
BW-1111MB 11 mm
BW-1112MB 12 mm
BW-1113MB 13 mm
BW-1114MB 14 mm
BW-1115MB 15 mm
BW-1116MB 16 mm
BW-1117MB 17 mm
BW-1118MB 18 mm
Wrench Roll
6 PIECE BLACK FINISH COMBINATION WRENCH SET• Weight: 1.00 lbs.
Item No. Contents Size
BL-006 BW-1160B 3/8"
BW-1161B 7/16"
BW-1162B 1/2"
BW-1163B 9/16"
BW-1164B 5/8"
BW-1166B 3/4"
Wrench Roll
6 PIECE BLACK FINISH COMBINATION WRENCH SET – METRIC• Weight: 1.00 lbs.
Item No. Contents Size
BL-006M BW-1110MB 10 mm
BW-1111MB 11 mm
BW-1112MB 12 mm
BW-1113MB 13 mm
BW-1117MB 17 mm
BW-1118MB 18 mm
Wrench Roll
Visit us at...www.stanleyproto.com130
WR
EN
CH
ES
MADE IN
UUUU SSSS AAAA
Wrenches.qxd 6/24/05 1:41 PM Page 130
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
WR
EN
CH
ES
131Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
C O M B I N A T I O N S E T S & S I N G L E S
BLACK FINISH COMBINATION WRENCH
Item No. Size Length Weight
BW-1156B 1/4" 4.0" 0.04 lbs.
BW-1159B 5/16" 4.4" 0.06 lbs.
BW-1160B 3/8" 5.1" 0.11 lbs.
BW-1161B 7/16" 5.8" 0.13 lbs.
BW-1162B 1/2" 6.4" 0.18 lbs.
BW-1163B 9/16" 7.1" 0.25 lbs.
BW-1164B 5/8" 7.9" 0.30 lbs.
BW-1165B 11/16" 8.8" 0.39 lbs.
BW-1166B 3/4" 9.7" 0.47 lbs.
BW-1167AB 13/16" 10.6" 0.66 lbs.
BW-1167B 7/8" 11.6" 0.78 lbs.
BW-1168B 15/16" 12.6" 0.94 lbs.
BW-1170B 1" 13.5" 1.02 lbs.
BW-1171B 1-1/16" 14.7" 1.29 lbs.
BW-1172B 1-1/8" 15.5" 1.57 lbs.
BW-1173B 1-1/4" 16.8" 1.91 lbs.
BW-1174B 1-5/16" 17.6" 2.61 lbs.
BW-1175B 1-3/8" 18.5" 2.63 lbs.
BW-1176B 1-7/16" 19.4" 3.45 lbs.
BW-1177B 1-1/2" 20.3" 3.43 lbs.
ASME B107.100
BLACK FINISH COMBINATION WRENCH – METRIC
Item No. Size Length Weight
BW-1106MB 6 mm 4.0" 0.04 lbs.
BW-1107MB 7 mm 4.2" 0.05 lbs.
BW-1108MB 8 mm 4.4" 0.07 lbs.
BW-1109MB 9 mm 4.8" 0.09 lbs.
BW-1110MB 10 mm 5.1" 0.10 lbs.
BW-1111MB 11 mm 5.8" 0.14 lbs.
BW-1112MB 12 mm 6.1" 0.14 lbs.
BW-1113MB 13 mm 6.4" 0.20 lbs.
BW-1114MB 14 mm 7.1" 0.25 lbs.
BW-1115MB 15 mm 7.5" 0.29 lbs.
BW-1116MB 16 mm 7.9" 0.37 lbs.
BW-1117MB 17 mm 8.8" 0.37 lbs.
BW-1118MB 18 mm 9.2" 0.45 lbs.
BW-1119MB 19 mm 9.7" 0.47 lbs.
BW-1120MB 20 mm 10.1" 0.53 lbs.
BW-1121MB 21 mm 10.6" 0.65 lbs.
BW-1122MB 22 mm 11.6" 0.75 lbs.
BW-1124MB 24 mm 12.6" 0.92 lbs.
BW-1125MB 25 mm 13.5" 1.05 lbs.
BW-1126MB 26 mm 13.5" 1.00 lbs.
BW-1127MB 27 mm 14.7" 1.35 lbs.
BW-1128MB 28 mm 15.5" 1.53 lbs.
BW-1130MB 30 mm 15.5" 1.53 lbs.
BW-1132MB 32 mm 16.8" 2.08 lbs.
ASME B107.100
Wrenches.qxd 6/24/05 1:41 PM Page 131
Visit us at...www.stanleyproto.com132
WR
EN
CH
ES
8 PIECE OPEN END WRENCH SET• Weight: 2.16 lbs.• Full Polished Finish
Item No. Contents Size
BW-108PNB 4020P 1/4" X 5/16"
4723P 3/8" X 7/16"
4724P 7/16" X 1/2"
4725P 1/2" X 9/16"
4727P 5/8" X 11/16"
4728P 11/16" X 3/4"
4732P 13/16" X 7/8"
4033P 15/16" X 1"
Wrench Roll
8 PIECE OPEN END WRENCH SET – METRIC• Weight: 2.16 lbs.• Full Polished Finish
Item No. Contents Size
BW-108MNB BWE-67MP 6 X 7 mm
BWE-89MP 8 X 9 mm
BWE-1011MP 10 X 11 mm
BWE-1213MP 12 X 13 mm
BWE-1415MP 14 X 15 mm
BWE-1617MP 16 X 17 mm
BWE-1819MP 18 X 19 mm
BWE-2022MP 20 X 22 mm
Wrench Roll
OPEN END WRENCH• Full Polished Finish
Item No. Size Length Weight
4020P 1/4" X 5/16" 4.5" 0.04 lbs.
4723P 3/8" X 7/16" 5.8" 0.09 lbs.
4724P 7/16" X 1/2" 6.4" 0.13 lbs.
4725P 1/2" X 9/16" 7.0" 0.18 lbs.
4727P 5/8" X 11/16" 8.3" 0.33 lbs.
4728P 11/16" X 3/4" 8.9" 0.46 lbs.
4732P 13/16" X 7/8" 10.1" 0.56 lbs.
4033P 15/16" X 1" 11.4" 0.85 lbs.
ASME B107.100
OPEN END WRENCH – METRIC• Full Polished Finish
Item No. Size Length Weight
BWE-67MP 6 X 7 mm 4.5" 0.04 lbs.
BWE-89MP 8 X 9 mm 5.1" 0.06 lbs.
BWE-1011MP 10 X 11 mm 5.8" 0.10 lbs.
BWE-1213MP 12 X 13 mm 6.4" 0.14 lbs.
BWE-1415MP 14 X 15 mm 7.6" 0.28 lbs.
BWE-1617MP 16 X 17 mm 8.3" 0.37 lbs.
BWE-1819MP 18 X 19 mm 8.9" 0.50 lbs.
BWE-2022MP 20 X 22 mm 9.5" 0.77 lbs.
ASME B107.100
Wrenches.qxd 6/24/05 1:41 PM Page 132
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
WR
EN
CH
ES
133Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
O P E N E N D , I G N I T I O N & B O X
10 PIECE OPEN END IGNITION WRENCH SET • Weight: 1.90 lbs.• Satin Finish
Item No. Contents Size
EW-40NB 3114 13/64" X 15/64"
3116 7/32" X 1/4"
3118 15/64" X 13/64"
3120 1/4" X 7/32"
3122 17/64" X 19/64"
3124 9/32" X 5/16"
3128 5/16" X 9/32"
3130 11/32" X 3/8"
3132 3/8" X 11/32"
3134 7/16" X 1/2"
Wrench Roll
OPEN END IGNITION WRENCHES• Satin Finish
Item No. Size Length Weight
3114 13/64 X 15/64" 3.2" 0.20 lbs.
3116 7/32 X 1/4" 3.2" 0.25 lbs.
3118 15/64 X 13/64" 3.2" 0.40 lbs.
3120 1/4 X 7/32" 4.5" 0.56 lbs.
3122 17/64 X 19/64" 4.7" 0.75 lbs.
3124 9/32 X 5/16" 5.0" 1.00 lbs.
3128 5/16 X 9/32" 5.2" 1.25 lbs.
3130 11/32 X 3/8" 5.5" 1.50 lbs.
3132 3/8 X 11/32" 5.7" 1.75 lbs.
3134 7/16 X 1/2" 6.0" 2.00 lbs.
Wrench Roll
ASME B107.100
6 PIECE LONG BOX END WRENCH SET• Weight: 3.36 lbs.• Full Polished Finish
Item No. Contents Size
BW-6PTNB BWS-1202P 5/16" X 3/8"
BWS-1206P 7/16" X 1/2"
BWS-1211P 9/16" X 5/8"
BWS-1214P 11/16" X 3/4"
BWS-1216P 13/16" X 7/8"
BWS-1218P 15/16" X 1"
Wrench Roll
Wrenches.qxd 6/24/05 1:41 PM Page 133
Visit us at...www.stanleyproto.com134
WR
EN
CH
ES
LONG BOX END WRENCH• Full Polished Finish
Item No. Size Length Weight
BWS-1202P 5/16" X 3/8" 7.0" 0.10 lbs.
BWS-1206P 7/16" X 1/2" 8.1" 0.18 lbs.
BWS-1210P 1/2" X 9/16" 8.0" 0.22 lbs.
BWS-1211P 9/16" X 5/8" 9.5" 0.36 lbs.
BWS-1214P 11/16" X 3/4" 11.1" 0.48 lbs.
BWS-1216P 13/16" X 7/8" 13.0" 0.67 lbs.
BWS-1218P 15/16" X 1" 15.1" 1.08 lbs.
ASME B107.100
8 PIECE FLARE NUT WRENCH SET – STANDARD AND METRIC• Weight: 2.28 lbs.• Full Polished Finish
Item No. Contents Size
FN-8PTNB FN-1402P 3/8" X 7/16"
FN-1404P 1/2" X 9/16"
FN-1406P 5/8" X 11/16"
FN-1410P 3/4" X 1"
FN-1012MP 10 mm X 12 mm
FN-1314MP 13 mm X 14 mm
FN-1517MP 15 mm X 17 mm
FN-1921MP 19 mm X 21 mm
4 PIECE FLARE NUT WRENCH SET• Weight: 1.11 lbs.• Full Polished Finish
Item No. Contents Size
FN-4PTNB FN-1402P 3/8" X 7/16"
FN-1404P 1/2" X 9/16"
FN-1406P 5/8" X 11/16"
FN-1410P 3/4" X 1"
4 PIECE FLARE NUT WRENCH SET – METRIC• Weight: 1.11 lbs.• Full Polished Finish
Item No. Contents Size
FN-4MNB FN-1012MP 10 mm X 12 mm
FN-1314MP 13 mm X 14 mm
FN-1517MP 15 mm X 17 mm
FN-1921MP 19 mm X 21 mm
Wrenches.qxd 6/24/05 1:41 PM Page 134
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
WR
EN
CH
ES
135Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
B O X , F L A R E N U T & M I S C .
FLARE NUT WRENCH• Full Polished Finish
Item No. Size Length Weight
FN-1402P 3/8" X 7/16" 6.3" 0.17 lbs.
FN-1404P 1/2" X 9/16" 7.5" 0.26 lbs.
FN-1406P 5/8" X 11/16" 8.8" 0.41 lbs.
FN-1410P 3/4" X 1" 9.2" 0.50 lbs.
ASME B107.100
FLARE NUT WRENCH – METRIC• Full Polished Finish
Item No. Size Length Weight
FN-911MP 9 X 11 mm 6.3" 0.12 lbs.
FN-1012MP 10 X 12 mm 6.9" 0.22 lbs.
FN-1314MP 13 X 14 mm 7.5" 0.26 lbs.
FN-1517MP 15 X17 mm 8.1" 0.32 lbs.
FN-1921MP 19 X 21 mm 8.8" 0.49 lbs.
ASME B107.100
AIR CONDITIONING WRENCH
Item No. Size Weight
ZW-1045A-A 1/4" and 3/16" Square Ratchet 0.33 lbs.
1/2" and 9/16" Hex End
ADJUSTABLE WRENCH
Item No. Size Length Weight
AW-1004-1 4" 4.3" 0.14 lbs.
AW-1006-1 6" 6.2" 0.29 lbs.
AW-1008-1 8" 8.3" 0.58 lbs.
AW-1010-1 10" 10.2" 1.11 lbs.
AW-1012-1 12" 12.3" 1.73 lbs.
AW-1015-1 15" 15" 2.85 lbs.
ASME B107.8M
UNIVERSAL CHAIN WRENCH
Item No. Length Weight
AW-1351 13.2" 1.85 lbs.
Wrenches.qxd 6/24/05 1:41 PM Page 135
Visit us at...www.stanleyproto.com136
WR
EN
CH
ES
T O R Q U E W R E N C H E S
RATCHETING MICROMETER ADJUSTABLE TORQUE WRENCHES• Desired torque value is pre-selected by use of a micrometer type scale. • When exact torque level is reached, wrench releases with an audible “click.” • Wrench resets automatically to same torque setting. • Ball bearing-mounted release mechanism eliminates accuracy variations between slow and fast loading. • Color-coded English and Metric markings. • Positive locking mechanism helps prevent accidental changes in torque values. • Comfortable, secure ergonomically designed grip.
Torque Range Increments
Item No. Foot Lbs Newton Meters Drive Size Foot Lbs Newton Meters Length Width Height Weight
39825-A 20-250* 3.61-29.03 3/8 " 1.0* .11 13.4 " 1.6 " 1.4 " 1.89 lbs
34870-A 10-100 16.9-138.9 3/8 " .5 .6 18.0 " 1.6 " 1.4 " 2.56 lbs
49859-A 20-150 33.9-210.1 1/2 " 1.0 1.4 20.8 " 1.6 " 1.6 " 2.96 lbs
49860A 25-250 43.4-384.4 1/2 " 1.0 1.4 20.8 " 1.6 " 1.7 " 3.84 lbs
49860ARK Repair Kit for 49860AASME B107.14M
* Measured in Inch lbs
BEAM TYPE TORQUE WRENCHES• Compact head design permits use in tight spots. • Torque scale reads in both English and Metric graduations. • Torques both right and left.
Torque Range
Item No. Inch Lbs Newton Meters Drive Size Length Weight
34835 0-800 0-90 3/8 " 13-1/2 " .83
49830 0-150 (ft/lbs) 0-200 1/2 " 16-3/8 " 1.44ASME B107.14M
Wrenches.qxd 6/24/05 1:41 PM Page 136
RATCHETING WRENCHES.
The Blackhawk™ by Proto® line of ratcheting wrenches features a variety of sizes, lengths and head configurations to
meet most job requirements. Blackhawk™ by Proto® ratcheting wrenches help increase productivity by combining the
convenient light weight and thin profile of a combination wrench with the ease of use of a ratchet and socket..
06.Ratcheting Wrenches.qxd 6/24/05 1:42 PM Page 137
Visit us at...www.stanleyproto.com138
RA
TC
HE
TIN
GW
RE
NC
HE
S
7 PIECE HIGH ACCESS RATCHETING WRENCH SET• Weight: 3.00 lbs.
Item No. Contents Size
BW-1250 BW-1210 3/8"
BW-1212 7/16"
BW-1214 1/2"
BW-1216 9/16"
BW-1218 5/8"
BW-1220 11/16"
BW-1222 3/4"
7 PIECE HIGH ACCESS RATCHETING WRENCH SET – METRIC• Weight: 3.00 lbs.
Item No. Contents Size
BW-1251 BW-1260 10 mm
BW-1261 12 mm
BW-1262 13 mm
BW-1263 14 mm
BW-1264 15 mm
BW-1265 16 mm
BW-1267 18 mm
HIGH ACCESS RATCHETING WRENCH
Item No. Size Length Weight
BW-1210 3/8" 5.0" 0.12 lbs.
BW-1212 7/16" 5.6" 0.17 lbs.
BW-1214 1/2" 6.4" 0.21 lbs.
BW-1216 9/16" 7.0" 0.31 lbs.
BW-1218 5/8" 7.9" 0.36 lbs.
BW-1220 11/16" 8.7" 0.46 lbs.
BW-1222 3/4" 9.7" 0.57 lbs.
HIGH ACCESS RATCHETING WRENCH – METRIC
Item No. Size Length Weight
BW-1258 8 mm 4.0" 0.09 lbs.
BW-1259 9 mm 4.5" 0.09 lbs.
BW-1260 10 mm 5.0" 0.13 lbs.
BW-12605 11 mm 5.7" 0.17 lbs.
BW-1261 12 mm 6.0" 0.19 lbs.
BW-1262 13 mm 6.4" 0.21 lbs.
BW-1263 14 mm 7.1" 0.30 lbs.
BW-1264 15 mm 7.5" 0.33 lbs.
BW-1265 16 mm 7.8" 0.37 lbs.
BW-1266 17 mm 8.9" 0.46 lbs.
BW-1267 18 mm 9.2" 0.49 lbs.
BW-1268 19 mm 9.75" 0.55 lbs.
06.Ratcheting Wrenches.qxd 6/24/05 1:42 PM Page 138
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
RA
TC
HE
TIN
GW
RE
NC
HE
S
139Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
H I G H A C C E S S & R E V E R S I B L E R A T C H E T I N G
12 PIECE REVERSIBLE RATCHETING WRENCH SET – METRIC• Weight: 4.19 lbs.
8 PIECE REVERSIBLE RATCHETING WRENCH SET• Weight: 2.44 lbs.
Item No. Contents Size
BW-1400 BW-1410 5/16"BW-1412 3/8"BW-1414 7/16"BW-1416 1/2"BW-1418 9/16"BW-1420 5/8"BW-1422 11/16"BW-1424 3/4"
8 PIECE REVERSIBLE RATCHETING WRENCH SET – METRIC• Weight: 2.44 lbs.
Item No. Contents Size
BW-1408 BW-1458 8 mmBW-1460 10 mmBW-1462 12 mmBW-1463 13 mmBW-1464 14 mmBW-1465 15 mmBW-1467 17 mmBW-1468 18 mm
REVERSE RATCHETING BOX WRENCH
Item No. Size Length Weight
BW-1403 7/32" 5.0" 0.13 lbs.BW-1405 1/4" 5.0" 0.13 lbs.BW-1410 5/16" 5.0" 0.13 lbs.BW-1412 3/8" 5.25" 0.15 lbs.BW-1414 7/16" 5.5" 0.16 lbs.BW-1416 1/2" 5.75" 0.17 lbs.BW-1418 9/16" 6.0" 0.19 lbs.BW-1420 5/8" 6.25" 0.20 lbs.BW-1422 11/16" 6.5" 0.22 lbs.BW-1424 3/4" 6.75" 0.26 lbs.
Contents SizeBW-1464 14 mmBW-1465 15 mmBW-1466 16 mmBW-1467 17 mmBW-1468 18 mmBW-1469 19 mm
REVERSIBLE RATCHETING WRENCHRatcheting box end. Thin head / slim shank as well as a short arc swing. Fine-toothed gears for smooth ratcheting. Ratcheting wrench-head angled for easy knuckle clearance. One-finger reverse lever for quick-change ratcheting direction. Same-sized open-end. Full-polish.
Item No. Contents SizeBW-1450 BW-1458 8 mm
BW-1459 9 mmBW-1460 10 mmBW-1461 11 mmBW-1462 12 mmBW-1463 13 mm
06.Ratcheting Wrenches.qxd 6/24/05 1:42 PM Page 139
Visit us at...www.stanleyproto.com140
RA
TC
HE
TIN
GW
RE
NC
HE
S
REVERSE RATCHETING BOX WRENCH – METRIC
Item No. Size Length Weight
BW-1458 8 mm 5.50" 0.16 lbs.
BW-1459 9 mm 5.875" 0.18 lbs.
BW-1460 10 mm 6.25" 0.20 lbs.
BW-1461 11 mm 6.50" 0.22 lbs.
BW-1462 12 mm 6.75" 0.26 lbs.
BW-1463 13 mm 7.0" 0.30 lbs.
BW-1464 14 mm 7.50" 0.33 lbs.
BW-1465 15 mm 8.0" 0.43 lbs.
BW-1466 16 mm 8.25" 0.47 lbs.
BW-1467 17 mm 8.75" 0.49 lbs.
BW-1468 18 mm 9.375" 0.51 lbs.
BW-1469 19 mm 9.75" 0.55 lbs.
7 PIECE JUMBO REVERSIBLE WRENCH SET• Weight: 11.98 lbs.
7 PIECE JUMBO REVERSIBLE WRENCH SET – METRIC• Weight: 10.43 lbs.
JUMBO REVERSIBLE WRENCH
Item No. Size Length Weight
BW-1426 13/16" 11.4" 0.70 lbs.
BW-1428 7/8" 11.4" 0.83 lbs.
BW-1430 15/16" 12.7" 0.95 lbs.
BW-1432 1" 12.7" 1.15 lbs.
BW-1434 1-1/16" 14.1" 1.43 lbs.
BW-1436 1-1/8" 15.9" 1.68 lbs.
BW-1438 1-1/4" 16.7" 2.22 lbs.
JUMBO REVERSIBLE WRENCH – METRIC
Item No. Size Length Weight
BW-1471 21 mm 11.4" 0.70 lbs.
BW-1472 22 mm 11.4" 0.83 lbs.
BW-1474 24 mm 12.7" 0.95 lbs.
BW-1477 27 mm 14.1" 1.43 lbs.
BW-1480 30 mm 15.9" 1.95 lbs.
BW-1482 32 mm 16.7" 2.22 lbs.
BW-1484 34 mm 18.1" 2.48 lbs.
Contents SizeBW-1434 1-1/16"BW-1436 1-1/8"BW-1438 1-1/4"
Item No. Contents SizeBW-1401 BW-1426 13/16"
BW-1428 7/8"BW-1430 15/16"BW-1432 1"
Contents SizeBW-1480 30 mmBW-1482 32 mmBW-1484 34 mm
Item No. Contents SizeBW-1451 BW-1471 21 mm
BW-1472 22 mmBW-1474 24 mmBW-1477 27 mm
06.Ratcheting Wrenches.qxd 6/24/05 1:42 PM Page 140
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
RA
TC
HE
TIN
GW
RE
NC
HE
S
141Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
R E V E R S I B L E R A T C H E T I N G & S T U B B Y
9 PIECE STUBBY REVERSIBLE RATCHETING WRENCH SET • Weight: 2.20 lbs.
13 PIECE STUBBY REVERSIBLE RATCHETING WRENCH SET – METRIC• Weight: 3.43 lbs.
STUBBY REVERSIBLE RATCHETING WRENCH
Item No. Size Length Weight
BW-2206R 1/4" 3.1" 0.06 lbs.
BW-2208R 5/16" 3.5" 0.08 lbs.
BW-2210R 3/8" 3.8" 0.11 lbs.
BW-2212R 7/16" 4.0" 0.12 lbs.
BW-2214R 1/2" 4.4" 0.16 lbs.
BW-2216R 9/16" 4.5" 0.18 lbs.
BW-2218R 5/8" 4.8" 0.24 lbs.
BW-2220R 11/16" 5.0" 0.27 lbs.
BW-2222R 3/4" 5.3" 0.36 lbs.
STUBBY REVERSIBLE RATCHETING WRENCH – METRIC
Item No. Size Length Weight
BW-2276R 6 mm 3.1" 0.06 lbs.BW-2278R 8 mm 3.5" 0.08 lbs.BW-2279R 9 mm 3.7" 0.09 lbs.BW-2260R 10 mm 3.8" 0.10 lbs.BW-2261R 11 mm 4.1" 0.14 lbs.BW-2262R 12 mm 4.3" 0.15 lbs.BW-2263R 13 mm 4.4" 0.18 lbs.BW-2264R 14 mm 4.5" 0.21 lbs.BW-2265R 15 mm 4.8" 0.24 lbs.BW-2266R 16 mm 5.1" 0.33 lbs.BW-2267R 17 mm 5.0" 0.38 lbs.BW-2268R 18 mm 5.2" 0.41 lbs.BW-2269R 19 mm 5.5" 0.47 lbs.
STUBBY REVERSIBLE RATCHETING WRENCHRatcheting box end. Thin head / slim, short ‘stubby’ shank as well as a short arc swing. Fine-toothed gears for smooth ratcheting. Ratcheting wrench-head angled for easy knuckle clearance. One-finger reverse lever for quick-change ratcheting direction. Same-sized open-end. Full-polish. Sets come in sturdy metal storage cases with molded wrench inserts and parts storage trays.
Contents SizeBW-2216R 9/16"BW-2218R 5/8"BW-2220R 11/16"BW-2222R 3/4"
Item No. Contents SizeBW-2250R BW-2206R 1/4"
BW-2208R 5/16"BW-2210R 3/8"BW-2212R 7/16"BW-2214R 1/2"
Contents SizeBW-2264R 14 mmBW-2265R 15 mmBW-2266R 16 mmBW-2267R 17 mmBW-2268R 18 mmBW-2269R 19 mm
Item No. Contents SizeBW-2251R BW-2276R 6 mm
BW-2278R 8 mmBW-2279R 9 mmBW-2260R 10 mmBW-2261R 11 mmBW-2262R 12 mmBW-2263R 13 mm
06.Ratcheting Wrenches.qxd 6/24/05 1:43 PM Page 141
Visit us at...www.stanleyproto.com142
RA
TC
HE
TIN
GW
RE
NC
HE
S
8 PIECE LOCKING FLEX-HEAD RATCHETING WRENCH SET• Weight: 4.35 lbs.
12 PIECE LOCKING FLEX RATCHETING BOX WRENCH SET – METRIC• Weight: 5.34 lbs.
LOCKING FLEX-HEAD RATCHETING WRENCHES
Item No. Size Length Weight
BW-3209L 5/16" 5.0" 0.16 lbs.
BW-3210L 3/8" 5.4" 0.17 lbs.
BW-3212L 7/16" 5.6" 0.19 lbs.
BW-3214L 1/2" 6.1" 0.20 lbs.
BW-3216L 9/16" 6.3" 0.29 lbs.
BW-3218L 5/8" 7.0" 0.33 lbs.
BW-3220L 11/16" 7.5" 0.46 lbs.
BW-3222L 3/4" 8.5" 0.57 lbs.
LOCKING FLEX-HEAD RATCHETING WRENCHES – METRIC
Item No. Size Length Weight
BW-3258L 8 mm 5.0" 0.13 lbs.
BW-3259L 9 mm 5.2" 0.16 lbs.
BW-3260L 10 mm 5.4" 0.16 lbs.
BW-3260AL 11 mm 5.6" 0.17 lbs.
BW-3261L 12 mm 5.8" 0.19 lbs.
BW-3262L 13 mm 6.1" 0.19 lbs.
BW-3263L 14 mm 6.3" 0.21 lbs.
BW-3264L 15 mm 6.7" 0.25 lbs.
BW-3265L 16 mm 7.0" 0.30 lbs.
BW-3266L 17 mm 7.3" 0.33 lbs.
BW-3267L 18 mm 8.0" 0.36 lbs.
BW-3268L 19 mm 8.5" 0.45 lbs.
LOCKING FLEX-HEAD RATCHETING WRENCHAdjustable ratcheting flex-head box end with locking gradations allows for locking the ratcheting head at the desired angle in tightspaces. Thumb pressure, push-button release locking mechanism. Thin head / slim shank as well as a short arc swing. Fine-toothedgears for smooth ratcheting. Same-sized open-end. Full-polish. Sets come in sturdy metal storage cases with molded wrench insertsand parts storage trays.
Contents SizeBW-3216L 9/16"BW-3218L 5/8"BW-3220L 11/16"BW-3222L 3/4"
Item No. Contents SizeBW-3251L BW-3209L 5/16"
BW-3210L 3/8"BW-3212L 7/16"BW-3214L 1/2"
Contents SizeBW-3263L 14 mmBW-3264L 15 mmBW-3265L 16 mmBW-3266L 17 mmBW-3267L 18 mmBW-3268L 19 mm
Item No. Contents SizeBW-3250L BW-3258L 8 mm
BW-3259L 9 mmBW-3260L 10 mmBW-3260AL 11 mmBW-3261L 12 mmBW-3262L 13 mm
06.Ratcheting Wrenches.qxd 6/24/05 1:43 PM Page 142
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
RA
TC
HE
TIN
GW
RE
NC
HE
S
143Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
S T U B B Y & L O C K I N G F L E X - H E A D
4 PIECE REVERSIBLE DOUBLE BOX WRENCH SET• Weight: 3.49 lbs.
Item No. Contents Size
BW-3330R BW-0516R 5/16" X 3/8"
BW-0716R 7/16" X 1/2"
BW-0916R 9/16" X 5/8"
BW-1116R 11/16" X 3/4"
6 PIECE REVERSIBLE DOUBLE BOX WRENCH SET – METRIC• Weight: 4.02 lbs.
Item No. Contents Size
BW-3332R BW-0809R 8 X 9 mm
BW-1011R 10 X 11 mm
BW-1213R 12 X 13 mm
BW-1415R 14 X 15 mm
BW-1618R 16 X 18 mm
BW-1719R 17 X 19 mm
REVERSIBLE DOUBLE BOX WRENCH
Item No. Size Length Weight
BW-0516R 5/16" X 3/8" 5.0" 0.12 lbs.
BW-0716R 7/16" X 1/2" 6.7" 0.26 lbs.
BW-0916R 9/16" X 5/8" 7.5" 0.33 lbs.
BW-1116R 11/16" X 3/4" 9.1" 0.49 lbs.
REVERSIBLE DOUBLE BOX WRENCH – METRIC
Item No. Size Length Weight
BW-0809R 8 X 9 mm 5.0" 0.12 lbs.
BW-1011R 10 X 11 mm 5.9" 0.19 lbs.
BW-1213R 12 X 13 mm 6.7" 0.26 lbs.
BW-1415R 14 X 15 mm 7.5" 0.33 lbs.
BW-1618R 16 X 18 mm 8.3" 0.40 lbs.
BW-1719R 17 X 19 mm 9.1" 0.49 lbs.
REVERSIBLE RATCHETING DOUBLE BOX WRENCHTwin ratcheting box ends. Thin head / slim shank as well as a short arc swing. Fine-toothed gears for smooth ratcheting. Ratchetingwrench-head angled for easy knuckle clearance on both ends. One-finger reverse lever for quick-change ratcheting direction. Full-polish. Sets come in sturdy metal storage case with molded wrench inserts and parts storage trays.
06.Ratcheting Wrenches.qxd 6/24/05 1:43 PM Page 143
Visit us at...www.stanleyproto.com144
RA
TC
HE
TIN
GW
RE
NC
HE
S
4 PIECE STANDARD DOUBLE-BOX E-TORX®
RATCHETING WRENCH SET • Weight: 3.53 lbs.
Item No. Contents Size
BW-1300T BW-0608T E6 X E8
BW-1012T E10 X E12
BW-1418T E14 X E18
BW-2024T E20 X E24
STANDARD DOUBLE-BOX E-TORX® RATCHETING WRENCH
Item No. Size Length Weight
BW-0608T E6 X E8 5.0" 0.12 lbs.
BW-1012T E10 X E12 5.9" 0.19 lbs.
BW-1418T E14 X E18 7.5" 0.33 lbs.
BW-2024T E20 X E24 9.1" 0.49 lbs.
8 PIECE RATCHET AND SOCKET SET• Weight: 0.26 lbs.
Item No. Contents Size Length
BW-0308RBS Ratcheting Box End Handle 1/4" & 5/16" 5"
Phillips® #1 1/4" Shank
Phillips® #2 1/4" Shank
Phillips® #3 1/4" Shank
Slotted 5/32" 1/4" Shank
Slotted 3/16" 1/4" Shank
Slotted 7/32" 1/4" Shank
DOUBLE-BOX E-TORX® RATCHETING WRENCHESTwin ratcheting box ends. Thin head / slim shank as well as a short arc swing. Fine-toothed gears for smooth ratcheting. Full-polish.Sets come in sturdy metal storage cases with molded wrench inserts and parts storage trays.
RATCHET AND SOCKET SETShort arc swing with fine-toothed gears for smooth ratcheting. Slim head profile design coupled with a tight gearing system to use insmall space. Quick-disk on drive head for easy fastener removal.
PHILLIPS® is a registered trademark of Phillips Screw Co.TORX® is a registered trademark of Textron, Inc. d/b/a The Camcar Screw & Mfg. Company
06.Ratcheting Wrenches.qxd 6/24/05 1:43 PM Page 144
SCREWDRIVERS, NUTDRIVERS,
HEX KEYS & BITS.JUST THE RIGHT MIX.
The BlackhawkTM by Proto® line of tools includes a core assortment of drivers, bits and keys to handle most fastener
turning operations in automotive and light-industrial applications. BlackhawkTM by Proto® screwdrivers have clear
extruded handles which help reduce stress and fracture potential, and hold up to common solvents and chemicals
found in automotive and industrial facilities. Handles are large and four-sided for increased torque and easy turning.
Precision-formed alloy steel bars are heat-treated and nickel-chrome plated to provide wear resistance with
excellent torque and bend strength. The narrow blade slotted drivers feature serrated tips that provide additional
bite on slotted fasteners. Cold formed Phillips® drivers provide for better screwdriver-to-fastener fit.
screwdrivers.qxd 6/24/05 1:44 PM Page 145
Visit us at...www.stanleyproto.com146
SC
REW
DR
IVER
S, N
UT
DR
IVER
S, H
EXK
EYS
& B
ITS
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
7 PIECE TORX® SCREWDRIVER SET• Weight: 1.40 lbs.
Item No. Contents Description Tip Blade Length Blade Shank
ST-127S ST-608S Torx® 8 3.3"
ST-610S Torx® 10 3.3"
ST-615S Torx® 15 3.3"
ST-620S Torx® 20 3.3"
ST-625S Torx® 25 3.3"
ST-627S Torx® 27 4.0"
ST-630S Torx® 30 4.0"
Pouch
7 PIECE COMBINATION SCREWDRIVER SET• Weight: 2.16 lbs.
Item No. Contents Description Tip Blade Length Blade Shank
ST-107S ST-1004S Slotted 1/4" 4.0"
ST-1006S Slotted 5/16" 6.0"
ST-1008S Slotted 3/8" 8.0"
ST-1081S Phillips® 1 Pt. 3.0"
ST-1082S Phillips® 2 Pt. 4.0"
ST-1140S Phillips® Stubby 2 Pt. 1.5"
ST-1145S Slotted Stubby 1/4" 1.5"
Pouch
5 PIECE PHILLIPS® SCREWDRIVER SET• Weight: 1.79 lbs.
Item No. Contents Description Tip Blade Length Blade Shank
ST-105S ST-1140S Phillips® Stubby 2 Pt. 1.5"
ST-1081S Phillips® 1 Pt. 3.0"
ST-1082S Phillips® 2 Pt. 4.0"
ST-1083S Phillips® 3 Pt. 6.0"
ST-1084S Phillips® 2 Pt. 10.0"
Pouch
5 PIECE SLOTTED SCREWDRIVER SET• Weight: 1.76 lbs.
Item No. Contents Description Tip Blade Length Blade Shank
ST-106S ST-1024S Slotted Square Shank 1/4" 4.0"
ST-1026S Slotted Square Shank 5/16" 6.0"
ST-1028S Slotted Square Shank 3/8" 8.0"
ST-1145S Slotted Stubby 1/4" 1.5"
ST-1150S Slotted Pocket Size 1/8" 2.0"
Pouch
screwdrivers.qxd 6/24/05 1:44 PM Page 146
S C R E W D R I V E R S
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
SC
REW
DR
IVER
S, NU
TD
RIV
ERS, H
EXK
EYS
& B
ITS
147Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
4 PIECE COMBINATION SCREWDRIVER SET• Weight: 1.28 lbs.
Item No. Contents Description Tip Blade Length Blade Shank
ST-104S ST-1004S Slotted 1/4" 4.0"
ST-1006S Slotted 5/16" 6.0"
ST-1081S Phillips® 1 Pt. 3.0"
ST-1082S Phillips® 2 Pt. 4.0"
Pouch
SLOTTED SCREWDRIVERS
Item No. Tip Blade Length Blade Shank Weight
ST-1004S 1/4" 4.0" 0.23 lbs.
ST-1006S 5/16" 6.0" 0.39 lbs.
ST-1008S 3/8" 8.0" 0.53 lbs.
ST-1010S 3/8" 10.0" 0.84 lbs.
ASME B107.15
SLOTTED SQUARE SHANK SCREWDRIVERS
Item No. Tip Blade Length Blade Shank Weight
ST-1024S 1/4" 4.0" 0.25 lbs.
ST-1026S 5/16" 6.0" 0.43 lbs.
ST-1028S 3/8" 8.0" 0.66 lbs.
ST-1032S 3/8" 10.0" 0.97 lbs.
ASME B107.15
SLOTTED ELECTRICIAN’S SCREWDRIVERS
Item No. Tip Blade Length Blade Shank Weight
ST-1043S 3/16" 3.0" 0.15 lbs.
ST-1046S 3/16" 6.0" 0.18 lbs.
ST-1048S 3/16" 10.0" 0.19 lbs.
ASME B107.15
SLOTTED STUBBY SCREWDRIVER
Item No. Tip Blade Length Blade Shank Weight
ST-1145S 1/4" 1.5" 0.10 lbs.
ASME B107.15
POCKET SCREWDRIVER
Item No. Description Tip Blade Length Blade Shank Weight
ST-1150S Slotted 1/8" 2.0" 0.03 lbs.
ST-1151S Phillips® 0 Pt. 2.0" 0.03 lbs.
ASME B107.15
PHILLIPS® SCREWDRIVERS
Item No. Tip Blade Length Blade Shank Weight
ST-1081S 1 Pt. 3.0" 0.15 lbs.
ST-1082S 2 Pt. 4.0" 0.23 lbs.
ST-1083S 3 Pt. 6.0" 0.38 lbs.
ST-1084S 2 Pt. 10.0" 0.51 lbs.
ASME B107.30
PHILLIPS® STUBBY SCREWDRIVER
Item No. Tip Blade Length Blade Shank Weight
ST-1140S 2 Pt. 1.5" 0.10 lbs.
ASME B107.30
screwdrivers.qxd 6/24/05 1:44 PM Page 147
Visit us at...www.stanleyproto.com148
SC
REW
DR
IVER
S, N
UT
DR
IVER
S, H
EXK
EYS
& B
ITS
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
TORX® SCREWDRIVERS
Item No. Tip Blade Length Blade Shank WeightST-608S 8 3.3" 0.05 lbs.ST-610S 10 3.3" 0.15 lbs.ST-615S 15 3.3" 0.13 lbs.ST-620S 20 3.3" 0.14 lbs.ST-625S 25 3.3" 0.16 lbs.ST-627S 27 4.0" 0.25 lbs.ST-630S 30 4.0" 0.26 lbs.
SPARK DETECTOR SCREWDRIVER• Light inside handle illuminates when spark is detected. • For use on ignition systems only.
Item No. Tip Width Length Blade Weight
ST-1214 1/8" 2.3" 0.04 lbs.
BIT DRIVER
Item No. Weight
900-70 0.07 lbs.
OFFSET SCREWDRIVERS
Item No. Tip Length Blade WeightST-1183 3/16" 3.0" 0.04 lbs.ST-1184 3/16" 4.0" 0.04 lbs.ST-1185 1/4" 4.5" 0.08 lbs.
SLOTTED SCREW STARTERS• Use to start the screw with one hand inserting or backing off the screw.• Inserted blade into the slot, turn slightly and release.• The center section of the blade rotates and exerts a positive grip upon
the screw slot.
Item No. Length Blade WeightST-1166 2.5" 0.05 lbs.ST-1167 5.5" 0.25 lbs.ST-1168 9.5" 0.59 lbs.
PHILLIPS® SCREW STARTERS• For starting Phillips® screws in tight, hard-to-reach spots. • The screw is held tightly with just a twist of the bit, then released when
the torque increases, after the screw has taken hold. • Strong magnet on opposite end makes retrieving small parts easy.
Item No. Length Blade Weight
ST-1171 5.8" 0.30 lbs.
8 PIECE STANDARD NUT DRIVER INCH SET — 6 POINT• Weight: 2.00 lbs.
Item No. Contents Description SizeST-828 ST-800 Standard Nut Driver 3/16"
ST-801 Standard Nut Driver 9/32"ST-803 Standard Nut Driver 1/4"ST-806 Standard Nut Driver 5/16"ST-809 Standard Nut Driver 11/32"ST-812 Standard Nut Driver 3/8"ST-815 Standard Nut Driver 7/16"ST-818 Standard Nut Driver 1/2"
Pouch
screwdrivers.qxd 6/24/05 1:44 PM Page 148
S C R E W D R I V E R S , N U T D R I V E R S , & B I T S
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
SC
REW
DR
IVER
S, NU
TD
RIV
ERS, H
EXK
EYS
& B
ITS
149Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
9 PIECE METRIC NUT DRIVER SET — 6 POINT• Weight: 2.22 lbs.
Item No. Contents Description SizeST-829M ST-904M Metric Nut Driver 4 mm
ST-905M Metric Nut Driver 5 mmST-955M Metric Nut Driver 5.5 mmST-907M Metric Nut Driver 7 mmST-908M Metric Nut Driver 8 mmST-909M Metric Nut Driver 9 mmST-910M Metric Nut Driver 10 mmST-911M Metric Nut Driver 11 mmST-912M Metric Nut Driver 12 mm
Pouch
STANDARD NUT DRIVERS — 6 POINT
Item No. Size WeightST-800 3/16" 0.14ST-801 9/32" 0.14ST-803 1/4" 0.14ST-806 5/16" 0.18ST-809 11/32" 0.20ST-812 3/8" 0.21ST-815 7/16" 0.27ST-818 1/2" 0.28
ASME B107.12
METRIC NUT DRIVERS — 6 POINT
Item No. Size WeightST-904M 4 mm 0.14ST-905M 5 mm 0.14ST-955M 5.5 mm 0.14ST-907M 7 mm 0.18ST-908M 8 mm 0.20ST-909M 9 mm 0.21ST-910M 10 mm 0.27ST-911M 11 mm 0.28ST-912M 12 mm 0.30
ASME B107.35M
40 PIECE INSERT BIT SET• Weight: 2.00 lbs.
Item No. Contents Description Blade940-JS 9000-A Adapter Socket
900-20 # 0 Pt. Phillips®
900-21 # 1 Pt. Phillips®
900-22 # 2 Pt. Phillips®
900-23 # 3 Pt. Phillips®
900-51 Phillips® ARC, #1900-52 Phillips® ARC, #2900-53 Phillips® ARC, #3900-0 Slotted 7/64"900-5 Slotted 7/32"900-1 Slotted 1/8"900-2 Slotted 9/64"900-8 Slotted 5/16"900-3 Slotted 5/32"900-4 Slotted 3/16"900-6 Slotted 1/4"900-7 Slotted 9/32"900-30 Square Head, #0900-31 Square Head, #1900-32 Square Head, #2
Contents Description Blade900-33 Square Head, #3900-40 Reed Prince #0 (Pozi)900-41 Reed Prince #1 (Pozi)900-42 Reed Prince #2 (Pozi)900-43 Reed Prince #3 (Pozi)900-60 Hex Bit, 5/64"900-61 Hex Bit, 1/8"900-62 Hex Bit, 5/32900-63 Hex Bit, 3/16"900-64 Hex Bit, 1/4"9000-T6 Torx® Bit T69000-T7 Torx® Bit T79000-T8 Torx® Bit T89000-T10 Torx® Bit T109000-T15 Torx® Bit T159000-T20 Torx® Bit T209000-T25 Torx® Bit T259000-T27 Torx® Bit T279000-T30 Torx® Bit T309000-T40 Torx® Bit T40Pouch
screwdrivers.qxd 6/24/05 1:44 PM Page 149
Visit us at...www.stanleyproto.com150
SC
REW
DR
IVER
S, N
UT
DR
IVER
S, H
EXK
EYS
& B
ITS
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
INSERT BITS
Item No. Description Blade Weight
9000-A Adapter Socket 0.01
900-20 # 0 Pt. Phillips® 0.01
900-21 # 1 Pt. Phillips® 0.01
900-22 # 2 Pt. Phillips® 0.01
900-23 # 3 Pt. Phillips® 0.01
900-51 Phillips® ARC, #1 0.01
900-52 Phillips® ARC, #2 0.01
900-53 Phillips® ARC, #3 0.01
900-0 Slotted 7/64" 0.01
900-5 Slotted 7/32" 0.01
900-1 Slotted 1/8" 0.01
900-2 Slotted 9/64" 0.01
900-8 Slotted 5/16" 0.01
900-3 Slotted 5/32" 0.01
900-4 Slotted 3/16" 0.01
900-6 Slotted 1/4" 0.01
900-7 Slotted 9/32" 0.01
900-30 Square Head, #0 0.01
900-31 Square Head, #1 0.01
900-32 Square Head, #2 0.01
900-33 Square Head, #3 0.01
900-40 Reed Prince #0 (Pozi) 0.01
900-41 Reed Prince #1 (Pozi) 0.01
900-42 Reed Prince #2 (Pozi) 0.01
900-43 Reed Prince #3 (Pozi) 0.01
9000-TP10 Tamper Resistant T10 0.01
9000-TP15 Tamper Resistant T15 0.01
9000-TP20 Tamper Resistant T20 0.01
9000-TP25 Tamper Resistant T25 0.01
9000-TP27 Tamper Resistant T27 0.01
900-60 Hex Bit, 5/64" 0.01
900-61 Hex Bit, 1/8" 0.01
900-62 Hex Bit, 5/32 0.01
900-63 Hex Bit, 3/16" 0.01
900-64 Hex Bit, 1/4" 0.01
9000-T6 Torx® Bit T6 0.01
9000-T7 Torx® Bit T7 0.01
9000-T8 Torx® Bit T8 0.01
9000-T10 Torx® Bit T10 0.01
9000-T15 Torx® Bit T15 0.01
9000-T20 Torx® Bit T20 0.01
9000-T25 Torx® Bit T25 0.01
9000-T27 Torx® Bit T27 0.01
9000-T30 Torx® Bit T30 0.01
9000-T40 Torx® Bit T40 0.01
screwdrivers.qxd 6/24/05 1:44 PM Page 150
S C R E W D R I V E R S & B I T S
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
SC
REW
DR
IVER
S, NU
TD
RIV
ERS, H
EXK
EYS
& B
ITS
151Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
26 PIECE RATCHETING SCREWDRIVER SET• Weight: 1.17 lbs.
Item No. Contents Description Blade
9026NB 9000-T10 T10 Torx® Bit
9000-T15 T15 Torx® Bit
9000-T20 T20 Torx® Bit
9000-T25 T25 Torx® Bit
9000-T30 T30 Torx® Bit
900-21 1 Pt. Phillips®
900-22 2 Pt. Phillips®
900-4 3/16" Slotted Bit
900-6 1/4" Slotted Bit
900-7 9/32" Slotted Bit
9000R Ratcheting Screwdriver
9000-A Adapter Socket
GW-1606 3/16", 6 Pt. Socket
GW-1608 1/4", 6 Pt. Socket
GW-1610 5/16", 6 Pt. Socket
GW-1611 11/32", 6 Pt. Socket
GW-1612 3/8", 6 Pt. Socket
GW-1614 7/16", 6 Pt. Socket
GW-1616 1/2", 6 Pt. Socket
GW-606M 6 mm, 6 Pt. Socket
GW-607M 7 mm, 6 Pt. Socket
GW-608M 8 mm, 6 Pt. Socket
GW-609M 9 mm, 6 Pt. Socket
GW-610M 10 mm, 6 Pt. Socket
GW-611M 11 mm, 6 Pt. Socket
GW-612M 12 mm, 6 Pt. Socket
Blow Molded Case
9 PIECE RATCHETING SCREWDRIVER SET• Weight 0.68 lbs.
Item No. Contents Description Blade
9023 9000R Ratcheting Screwdriver
9000-T15 T15 Torx® Bit
9000-T20 T20 Torx® Bit
9000-T25 T25 Torx® Bit
9000-T30 T30 Torx® Bit
900-21 1 Pt. Phillips®
900-22 2 Pt. Phillips®
900-4 3/16" Slotted Bit
900-7 9/32" Slotted Bit
screwdrivers.qxd 6/24/05 1:44 PM Page 151
Visit us at...www.stanleyproto.com152
SC
REW
DR
IVER
S, N
UT
DR
IVER
S, H
EXK
EYS
& B
ITS
H E X K E Y S
13 PIECE STANDARD HEX KEY WRENCH SET• Weight 0.63 lbs.
Item No. Size Short Arm Long Arm
ZW-53 .050" 0.5" 1.6"
1/16" 0.6" 1.7"
5/64" 0.6" 1.8"
3/32" 0.6" 2.0"
7/64" 0.7" 2.1"
1/8" 0.7" 2.2"
9/64" 0.8" 2.4"
5/32" 0.8" 2.5"
3/16" 0.9" 2.7"
7/32" 1.0" 2.9"
1/4" 1.1" 3.2"
5/16" 1.2" 3.6"
3/8" 1.3" 4.1"
13 PIECE STANDARD LONG HEX KEY WRENCH SET• Weight 0.88 lbs.
Item No. Size Short Arm Long Arm
ZW-59 .050" 0.6" 2.8"
1/16" 0.6" 3.0"
5/64" 0.6" 3.0"
3/32" 0.7" 3.4"
7/64" 0.7" 3.5"
1/8" 0.7" 3.7"
9/64" 0.8" 3.9"
5/32" 0.8" 4.1"
3/16" 0.9" 4.5"
7/32" 1.0" 4.8"
1/4" 1.1" 5.2"
5/16" 1.2" 5.8"
3/8" 1.4" 6.6"
9 PIECE METRIC HEX KEY WRENCH SET• Weight 0.58 lbs.
Item No. Size Short Arm Long Arm
ZW-69 1.5 mm 13.1 mm 43.1 mm
2.0 mm 14.8 mm 47.8 mm
2.5 mm 17.1 mm 53.1 mm
3.0 mm 18.5 mm 60.8 mm
4.0 mm 23.4 mm 66.6 mm
5.0 mm 27.3 mm 76.2 mm
6.0 mm 30.9 mm 87.0 mm
8.0 mm 34.5 mm 95.9 mm
10.0 mm 37.5 mm 105.4 mm
screwdrivers.qxd 6/24/05 1:44 PM Page 152
PL
IER
S
MADE IN
UUUU SSSS AAAAVisit us at...www.stanleyproto.com158
LOCK RING PLIERS• Designed to spread snap lock rings and remove horseshoe type brake key from shoe. • Spring action keeps jaws in closed position for easy operation. • Jaws notched and outside face knurled to prevent slipping.
Item No. Length WeightPT-1266 7.750" 0.56 lbs.
COMBINATION INTERNAL/EXTERNAL HEAVY-DUTY RETAINING RING PLIERS
Item No. Tip Diameter Tip Length Nose Width Total Length WeightPT-1286 0.070" 0.312" 1.250" 8.125" 0.30 lbs.
AMSE B107.19M
EXTERNAL RETAINING RING PLIERS
Item No. Tip Diameter Tip Length Nose Width Total Length WeightPT-1287 0.38" 0.312" 0.812" 5.812" 0.15 lbs.
AMSE B107.19M
INTERNAL RETAINING RING PLIERS
Item No. Tip Diameter Tip Length Nose Width Total Length WeightPT-1288 0.38" 0.312" 0.750 5.562" 0.14 lbs.
AMSE B107.19M
COMBINATION INTERNAL/EXTERNAL RETAINING RING PLIERS WITH 90° BENT TIPS
Item No. Tip Diameter Tip Length Nose Width Total Length WeightPT-1289 0.38" 0.312" 0.812" 5.562" 0.15 lbs.
AMSE B107.19M
COMBINATION INTERNAL/EXTERNAL RETAINING RING PLIERS
Item No. Tip Diameter Tip Length Nose Width Total Length WeightPT-1285 0.38" 0.312" 1.125" 5.750" 0.16 lbs.
AMSE B107.19M
P L I E R S
Pliers.qxd 6/24/05 1:46 PM Page 158
PLIERS.A BROAD RANGE AVAILABLE.
BlackhawkTM by Proto® Pliers are manufactured from alloy steel then heat treated for strength and durability. Most
have cushion grips for comfort. Manufactured to meet the demands of automotive and light industrial applications.
Pliers.qxd 6/24/05 1:46 PM Page 153
P L I E R S
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.155
Toll Free Customer Service Number: 1-800-800-TOOLCustomer Service FAX Number: 1-770-648-9108
PT-1105 PT-1106 PT-1107 PT-1110
PT-1300 PT-1310 PT-1320
PL
IER
S
LOCKING PLIERS
Item No. Description Length WeightPT-1105 Curved Jaw Locking Plier 5" 0.35 lbs.PT-1106 Long Nose Locking Plier 6" 0.38 lbs.PT-1107 Straight Jaw Locking Plier 7" 0.77 lbs.PT-1110 Curved Jaw Locking Plier 10" 1.15 lbs.
ASME B107.24
LONG REACH PLIERS
Item No. Description Length Weight SpecificationsPT-1300 Straight Nose Long Reach Plier 11-1/2" 0.69 lbs. ASME B107.13MPT-1310 Bent Nose Long Reach Plier 11-1/2" 0.67 lbs. ASME B107.13MPT-1320 Cutter/Gripper Long Reach Plier 11" 0.80 lbs.
4-PIECE MINI LONG REACH PLIER SET• Precision plier set, 1" longer than standard mini pliers.
Item No. Description WeightPT-3000 Diagonal 1.13 lbs.
Long Nose BentLong Nose w/CutterFlat Nose (Duck Bill)
Pliers.qxd 6/24/05 1:46 PM Page 155
PL
IER
S
Visit us at...www.stanleyproto.com156
DIAGONAL CUTTING PLIERS• Cushion grip.
Item No. Length WeightPT-1052-1 6" 0.39 lbs.
ASME B107.11M
LARGE DIAGONAL PLIERS• Cushion grip.
Item No. Length WeightPT-1060-1 7" 0.55 lbs.
ASME B107.11M
HEAVY DUTY DIAGONAL PLIERS• Cushion grip.• Short nose.
Item No. Length WeightPT-1057-1 7" 0.50 lbs.
ASME B107.11M
MIDGET DIAGONAL CUTTING PLIERS• Cushion grip.
Item No. Length WeightPT-1150 5" 0.34 lbs.
ASME B107.11M
LONG NOSE SIDE CUTTING PLIERS• Cushion grip.
Item No. Length WeightPT-1128-1 6-1/2" 0.31 lbs.
ASME B107.13M
MIDGET NEEDLE NOSE PLIERS• Cushion grip.
Item No. Length WeightPT-1154 5-1/2" 0.16 lbs.
ASME B107.13M
Pliers.qxd 6/24/05 1:46 PM Page 156
PL
IER
S
P L I E R S
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.157
Toll Free Customer Service Number: 1-800-800-TOOLCustomer Service FAX Number: 1-770-648-9108
CURVED NEEDLE NOSE PLIERS• Cushion grip.• 75º bent jaw.
Item No. Length WeightPT-1149-1 6" 0.32 lbs.
AMSE B107.13M
LINEMAN’S PLIERS• Cushion grip.
Item No. Length WeightPT-1108-1 8" 0.88 lbs.
AMSE B107.20M
DUCKBILL WIRING PLIERS• Cushion grip.
Item No. Length WeightPT-1178 8" 0.44 lbs.
AMSE B107.13M
WIRE STRIPPER AND CRIMPER• Cushion grip.
Item No. Length WeightPT-1050 8-1/2" 0.45 lbs.
AMSE B107.37M
BATTERY PLIERS• Cushion grip.
Item No. Length WeightPT-1259 7" 0.47 lbs.
Pliers.qxd 6/24/05 1:46 PM Page 157
PL
IER
S
MADE IN
UUUU SSSS AAAAVisit us at...www.stanleyproto.com158
LOCK RING PLIERS• Designed to spread snap lock rings and remove horseshoe type brake key from shoe. • Spring action keeps jaws in closed position for easy operation. • Jaws notched and outside face knurled to prevent slipping.
Item No. Length WeightPT-1266 7.750" 0.56 lbs.
COMBINATION INTERNAL/EXTERNAL HEAVY-DUTY RETAINING RING PLIERS
Item No. Tip Diameter Tip Length Nose Width Total Length WeightPT-1286 0.070" 0.312" 1.250" 8.125" 0.30 lbs.
AMSE B107.19M
EXTERNAL RETAINING RING PLIERS
Item No. Tip Diameter Tip Length Nose Width Total Length WeightPT-1287 0.38" 0.312" 0.812" 5.812" 0.15 lbs.
AMSE B107.19M
INTERNAL RETAINING RING PLIERS
Item No. Tip Diameter Tip Length Nose Width Total Length WeightPT-1288 0.38" 0.312" 0.750 5.562" 0.14 lbs.
AMSE B107.19M
COMBINATION INTERNAL/EXTERNAL RETAINING RING PLIERS WITH 90° BENT TIPS
Item No. Tip Diameter Tip Length Nose Width Total Length WeightPT-1289 0.38" 0.312" 0.812" 5.562" 0.15 lbs.
AMSE B107.19M
COMBINATION INTERNAL/EXTERNAL RETAINING RING PLIERS
Item No. Tip Diameter Tip Length Nose Width Total Length WeightPT-1285 0.38" 0.312" 1.125" 5.750" 0.16 lbs.
AMSE B107.19M
P L I E R S
Pliers.qxd 6/24/05 1:46 PM Page 158
HAMMERS, CHISELS,
PUNCHES, PRY BARS.
Blackhawk™ by Proto® tools comprise of an assortment of striking and struck products. Both categories have
the right mix of products to meet basic automotive, fleet maintenance and light-industrial applications.
(Other hammers available in the Stanley® Hand Tool section.)
Sriking and Struck.qxd 6/24/05 1:47 PM Page 159
Visit us at...www.stanleyproto.com160
HA
MM
ER
S,
CH
ISE
LS
, P
UN
CH
ES
& P
RY
BA
RS
BALL PEIN HAMMERS
Item No. Head Weight Length Weight
HT-1005-1 16 oz. 14" 1.49 lbs.
HT-1007-1 24 oz. 15" 2.10 lbs.
HT-1008-1 32 oz. 16" 2.83 lbs.
SOFTFACE HAMMERS• Tough, replaceable, molded plastic head.
Item No. Head Weight Length Total Weight
HT-1452 7 oz. 12.25" 1.0 lbs.
HT-1453 13 oz. 12.25" 1.7 lbs.
HT-1452T Replacement tip 1.4 oz.
(1 Tip per package)
RUBBER MALLET• High grade rubber head pinned to the handle.
Item No. Head Weight Length Weight
HT-1255 0.8 lbs. 13.25" 1.2 lbs.
Additional hammers can be found in the Hand Tools section.
Sriking and Struck.qxd 6/24/05 1:47 PM Page 160
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
HA
MM
ER
S, CH
ISE
LS, P
UN
CH
ES
& P
RY
BA
RS
161Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
H A M M E R S , C H I S E L S & P U N C H S E T S
14-PIECE CHISEL AND PUNCH SET• Weight: 3.81 lbs.
Item No. Contents Description
CT-114 CT-1003 5/16" Hand Cold Chisel
CT-1004 3/8" Hand Cold Chisel
CT-1006 1/2" Hand Cold Chisel
CT-1008 5/8" Hand Cold Chisel
CT-1010 3/4" Hand Cold Chisel
CT-1156 1/2" Flat Cape Chisel
CT-1254 3/8" Diamond Point Chisel
CT-1304 7/16" Center Punch 5-1/2" L
CT-1314 3/8" Prick Punch 5" L
CT-1453 5/16" Pin Punch 5" L
CT-1454 5/16" Pin Punch 5-1/4" L
CT-1456 5/16" Pin Punch 5-1/2" L
CT-1464 3/8" Pin Punch 7" L
CT-1466 1/2" Pin Punch 7" L
Pouch
5-PIECE PIN PUNCH SET• Weight: 0.88 lbs.
Item No. Contents Description
CT-205 CT-1453 5/16" Pin Punch 5" L
CT-1454 5/16" Pin Punch 5-1/4" L
CT-1456 5/16" Pin Punch 5-1/2" L
CT-1464 3/8" Pin Punch 7" L
CT-1466 1/2" Pin Punch 7" L
Pouch
5-PIECE COLD CHISEL SET• Weight: 2.30 lbs.
Item No. Contents Description Bit/Edge Length
CT-105 CT-1003 5/16" 3/8" 5-1/4"
CT-1004 3/8" 7/16" 5-1/2"
CT-1006 1/2" 5/8" 6-1/2"
CT-1008 5/8" 3/4" 7"
CT-1010 3/4" 7/8" 7-1/2"
Pouch
Sriking and Struck.qxd 6/24/05 1:47 PM Page 161
Visit us at...www.stanleyproto.com162
HA
MM
ER
S,
CH
ISE
LS
, P
UN
CH
ES
& P
RY
BA
RS
MADE IN
UUUU SSSS AAAA
COLD CHISELS
Item No. Size Stock Bit/Edge Length Weight
CT-1003 5/16" 3/8" 5-1/4" 0.02 lbs.
CT-1004 3/8" 7/16" 5-1/2" 0.18 lbs.
CT-1006 1/2" 5/8" 6-1/2" 0.37 lbs.
CT-1008 5/8" 3/4" 7" 0.60 lbs.
CT-1010 3/4" 7/8" 7-1/2" 0.95 lbs.
ASME B107.47M
ROUND NOSE CHISEL
Item No. Size Stock Bit/Edge Length Weight
CT-1204 3/8" 1/4" 5-1/2" 0.17 lbs.
ASME B107.47M
DIAMOND POINT CHISEL
Item No. Size Stock Bit/Edge Length Weight
CT-1254 3/8" 3/16" 5" 0.15 lbs.
ASME B107.47M
CAPE CHISEL
Item No. Size Stock Bit/Edge Length Weight
CT-1156 3/8" 1/4" 5-1/2" 0.17 lbs.
ASME B107.47M
LONG COLD CHISELS
Item No. Size Stock Bit/Edge Length Weight
CT-1108 5/8" 3/4" 12" 1.07 lbs.
CT-1110 3/4" 7/8" 12" 1.55 lbs.
ASME B107.47M
Sriking and Struck.qxd 6/24/05 1:47 PM Page 162
C H I S E L S & P U N C H E S
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
HA
MM
ER
S, CH
ISE
LS, P
UN
CH
ES
& P
RY
BA
RS
163Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
HAND PUNCH
Item No. Size Stock Bit/Edge Length Weight
CT-1404 3/8" 3/16" 5" 0.14 lbs.
ASME B107.48M
LONG TAPER PUNCHES
Item No. Size Stock Bit/Edge Length Weight
CT-1554 1/2" 5/32" 8-1/2" 0.36 lbs.
CT-1556 1/2" 3/16" 9" 0.37 lbs.
CT-1558 5/8" 5/16" 11" 0.76 lbs.
ASME B107.48M
CENTER PUNCHES
Item No. Size Stock Bit/Edge Length Weight
CT-1303 3/8" 5/32" 5" 0.12 lbs.
CT-1304 7/16" 3/16" 5-1/2" 0.20 lbs.
CT-1306 1/2" 1/4" 6" 0.28 lbs.
ASME B107.48M
PIN PUNCHES
Item No. Size Stock Bit/Edge Length Weight
CT-1453 5/16" 1/8" 5" 0.09 lbs.
CT-1454 5/16" 5/32" 5-1/4" 0.10 lbs.
CT-1456 5/16" 3/16" 5-1/2" 0.10 lbs.
CT-1464 3/8" 1/4" 7" 0.19 lbs.
CT-1466 1/2" 5/16" 7" 0.33 lbs.
ASME B107.48M
Sriking and Struck.qxd 6/24/05 1:47 PM Page 163
Visit us at...www.stanleyproto.com164
HA
MM
ER
S,
CH
ISE
LS
, P
UN
CH
ES
& P
RY
BA
RS
MADE IN
UUUU SSSS AAAA
ALIGNING PUNCH
Item No. Size Stock Bit/Edge Length Weight
CT-1509 5/8" 1/4" 11" 0.76 lbs.
ASME B107.48M
SCRIBING PUNCH
Item No. Size Stock Bit/Edge Length Weight
CT-1314 3/8" 5/32" 5" 0.13 lbs.
ASME B107.48M
PRY BARS
Item No. Size Stock Bit/Edge Length Weight
CT-1617 1/2" 1-15/16" 15" 0.83 lbs.
CT-1620 5/8" 2-5/8" 18" 1.57 lbs.
ASME B107.60M
PINCH BARS
Item No. Size Stock Bit/Edge Length Weight
CT-1606 1/2" 5/8" 14" 0.70 lbs.
CT-1610 5/8" 3/4" 16" 1.21 lbs.
ASME B107.60M
P U N C H E S & P R Y B A R S
Sriking and Struck.qxd 6/24/05 1:47 PM Page 164
PULLERS.FOR MULTIPLE APPLICATIONS.
Blackhawk™ by Proto® gear and specialty pullers are available for automotive and light industrial applications
in a range of styles and sizes to meet your needs.
Pullers.qxd 6/24/05 1:48 PM Page 165
MADE IN
UUUU SSSS AAAAVisit us at...www.stanleyproto.com166
PU
LL
ER
S
10" ADJUSTABLE GEAR PULLER• 7 ton capacity.• Heavy-duty.• All parts are heat-treated for long life. • Three-position jaws provide added versatility with extended reach capabilities. • Power pitch threads on center screw allow for increased pulling power.
Max. Max. Center Screw Item No. Spread Reach Capacity Size Weight
ET-1011 10" 9" 7 Tons .69" x 8.38" 4.84 lbs.
7" ADJUSTABLE GEAR PULLER• 5 ton capacity.• A middle-range puller capable of handling a wide variety of applications. • Yoke and jaws are drop-forged from alloy steel.• All parts are heat-treated for long life. • Two-position jaws for versatility.• Power pitch threads on center screw allow for increased pulling power.
Max. Max. Center Screw Item No. Spread Reach Capacity Size Weight
ET-1008 7" 5.50" 5 Tons .56" x 6.38" 2.18 lbs.
SMALL GEAR PULLER• 2 ton capacity.• Designed for pulling small gears, bearings and armature arbors. • Power pitch threads on center screw allow for increased pulling power.
Max. Max. Center Screw Item No. Spread Reach Capacity Size Weight
ET-1005 4" 3.50" 2 Tons .38" x 4.25" 0.98 lbs.
Pullers.qxd 6/24/05 1:48 PM Page 166
G E A R P U L L E R S
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
PU
LL
ER
S
167Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
9" REVERSIBLE 2-JAW GEAR PULLER• 7 ton capacity.• Reversible arms provide thin grips at one end for application in restricted spaces;
slotted grips at the others.• Incorporates automatic grip tightening.
Max. Max. Center Screw Item No. Spread Reach Capacity Size Weight
ET-1010 9" 5.50" 7 Tons .69" x 8.38" 4.39 lbs.
6" REVERSIBLE GEAR PULLER• 5 ton capacity.• Designed for removal of magneto and generator gears and bearings, timed gears,
pinions and other small parts.• Incorporates automatic grip tightening.
Max. Max. Center Screw Item No. Spread Reach Capacity Size Weight
ET-1007 6" 3.50" 5 Tons .56" x 6.38" 2.17 lbs.
8-IN-1 PULLER• 2 ton capacity.• Adapts to almost any application quickly and easily. • Only 16 pieces make 8 different pullers. • Choose 2- or 3-jaw configurations, long or short reach, wide or narrow jaws. • Comes in a tough plastic organizer box.
Max. Max. Center Screw Item No. Spread Reach Capacity Size Weight
ET-1170A 6" 5.50" 4 Tons .63" x 7.00" 3.61 lbs.
Pullers.qxd 6/24/05 1:48 PM Page 167
TAPERED BEARING SPLINTERS• Designed for the removal of bearings, thin-faced gears and cone-shaped gears. • Beveled edge allows insertion behind pulleys, gears, or bearings where space
limitations preclude the use of a standard jaw puller. • For bearing removal, we recommend these attachments be used in conjunction
with Blackhawk™ by Proto® puller ET-1322 for ET-1205 only.
Item No. Min. Reach Max. Reach Weight
ET-1205 0 2.25" 1.11 lbs.
ET-1207 0 4.25" 5.07 lbs.
BODY DENT PULLER• Removes auto body creases and dents without disturbing upholstery, headliners
and body hardware. • Removing inner panels of dented area is also eliminated. • Punch or drill hole in dented panel, insert self-threading screw or hook and with a
few raps of the sliding hammer return metal to its original shape. • Sturdy plastic handle and black oxide body.
Item No. Length Weight
ET-1710 13.00" 3.72 lbs.
PILOT BEARING PULLER• Use for removing sleeve-type bearings from 1/2" to 1-1/4" inside diameters on
flywheels, pumps and generators. • Turn the handle for quick adjustment and the center rod spreads in the alloy jaws
for a tight fit inside the gearing.
Item No. Max. Reach Spread Weight
ET-1068A 1.50" .50" to 1.25" 4.13 lbs.
Visit us at...www.stanleyproto.com168
PU
LL
ER
S
Pullers.qxd 6/24/05 1:48 PM Page 168
HEAVY-DUTY UNIVERSAL HUB PULLER• For use where hub bolt circle does not exceed 7-1/2".• Sliding arms are quickly adjusted to fit any hub, regardless of the number of
wheel studs used.
Item No. Bolt Circle Range Weight
ET-1156A 7.50" 9.57 lbs.
GEAR AND PULLEY PULLER• Designed for pulling timing gears, bearings and races on generators and other parts
such as fan pulleys, etc. • The slotted block permits a wide range of adjustments. • The screw is long enough to reach through the crank hole and remove the fan pulley
without dismounting the radiator. • Use with ET-1205 for push-pull operations.
Item No. Screw Size Weight
ET-1322 6.00" 1.72 lbs.
BATTERY TERMINAL AND GENERATOR BEARING PULLER• Designed to engage either below or on the the sides of the cable terminals and lift
even badly corroded terminals with no harm to the battery case or posts. • The swivel allows its use as a generator bearing puller and magneto gear puller.
Item No. Weight
ET-1071A 0.64 lbs.
S P E C I A L T Y P U L L E R S
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
PU
LL
ER
S
169Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
Pullers.qxd 6/24/05 1:48 PM Page 169
Visit us at...www.stanleyproto.com170
PU
LL
ER
S
STEERING WHEEL PULLER• Any steering wheel that is tapped to take cap screws can be easily removed with this
Steering Wheel Puller, for removing flanges, pulleys, etc. • For use over a hollow shaft, a nipple is supplied to provide a base for the screw. • Also includes adapters for Buick® and Chrysler® products (not shown.)
Item No. Weight
ET-1328A 2.25 lbs.
Buick® is a registered trademark of General Motors Corporation.Chrysler® is a registered trademark of Daimler Chrysler Corporation.
HARMONIC BALANCER PULLER• Designed for use on balancers, vibration dampers, pulleys or any gear with
tapped holes. • The four slots in the yoke allow the use of this tool in either 2 or 3-hole applications. • The floating swivel prevents damage to shaft ends. • Included are the necessary side screws —
(3) 3/8" x 24 x 2"; (3) 5/16" x 18 x 2"; (2) 3/8" x 16 x 4"; (3) M8 x 1.25 x 80 mm; (3) M10 x 1.50 x 50 mm (not shown).
Item No. Weight
ET-1330 2.71 lbs.
S P E C I A L T Y P U L L E R S
Pullers.qxd 6/24/05 1:48 PM Page 170
MISCELLANEOUS TOOLS.
No tool box is complete without an assortment of miscellaneous tools. BlackhawkTM by Proto® offer specialty
automotive feeler gauges, engine, brake and wheel tools. Other tools such as a tubing bender, steel and wire
scratch brushes, wire power tool brushes, scrapers, hacksaws and replacement blades complete the tool box.
Miscellaneous.qxd 6/24/05 1:50 PM Page 171
NON-MAGNETIC FEELER GAUGE
Item No. Contents SAE (Metric) Sizes
MT-1020-1 6 blades .006" (.15 mm)
.008" (.20 mm)
.010" (.25 mm)
.012" (.30 mm)
.014" (.356 mm)
.016" (.406 mm)
6 WIRE HIGH-ENERGY FEELER GAUGE• For large gap, high energy ignition systems.• Contains 6 wire gauges and a gap setting tool.• Wire ends angled for use with electrodes set below the shell.
Item No. Contents SAE (Metric) Sizes
MT-1021A 6 wire gauges .044" (1.12 mm)
.045" (1.15 mm)
.050" (1.25 mm
.054" (1.37 mm)
.060" (1.52 mm)
.080" (2.03 mm)
SPARK PLUG AND IGNITION FEELER GAUGE• Gauges for adjusting both spark plugs and points. • Each gauge is specified in SAE and Metric sizes. • Also included are a spark plug adjusting tool and an ignition file. • Weight: 0.11 lbs.
Item No. Set Contains SAE (Metric) Sizes
MT-1024 8 Wire Gauges 0.022" (0.559 mm)
0.025" (0.635 mm)
0.028" (0.711 mm)
0.030" (0.762 mm)
0.032" (0.813 mm)
0.035" (0.889 mm)
0.038" (0.965 mm)
0.040" (1.020 mm)
15 Blades 0.012" (0.305 mm)
0.013" (0.330 mm)
0.014" (0.356 mm)
0.015" (0.381 mm)
0.016" (0.406 mm)
0.017" (0.432 mm)
0.018" (0.457 mm)
0.019" (0.483 mm)
0.020" (0.508 mm)
0.022". (0.559 mm)
0.024". (0.610 mm)
0.025" (0.635 mm)
0.028" (0.711 mm)
0.030" (0.762 mm)
0.032" (0.813 mm)
MADE IN
UUUU SSSS AAAAVisit us at...www.stanleyproto.com172
MIS
CE
LL
AN
EO
US
Miscellaneous.qxd 6/24/05 1:50 PM Page 172
6 WIRE HIGH ENERGY SPARK PLUG FEELER GAUGE• For adjusting spark plugs on cars with high-energy electronic systems
which require large plug gaps. • Includes 6 precision made wires and adjusting tool.• Weight: 0.06 lbs.
Item No. Contents Sizes
MT-1026A 6 Wire Gauges 0.63 mm, 0.71 mm
0.76 mm, 0.81 mm
0.89 mm, 1.00 mm
7 WIRE HIGH ENERGY SPARK PLUG FEELER GAUGE• For adjusting spark plugs on cars with high-energy electronic systems
which require large plug gaps. • Includes 7 precision made wires and adjusting tool. • Weight: 0.07 lbs.
Item No. Contents Sizes
MT-1027A 7 Wire Gauges 0.50 mm, 0.65 mm, 0.71 mm
0.76 mm, 0.81 mm
0.89 mm, 1.0 mm
REGULAR SPARK PLUG WIRE GAUGE
Item No. Contents Sizes
MT-1040-1 1 Electrode bender
8 Wire gauges .020", .025", .028", .030"
.032", .034", .035", .040"
FEELER GAUGE• Services domestic and foreign cars.
Item No. Contents Sizes
MT-1041 16, 1.75" x 0.25" blades .011", .012", .013", .014"
.015", .016", .017", .018"
.019", .020", .022", .024"
.025", .028", .030", 035"
IGNITION FEELER GAUGE
Item No. Contents Sizes
MT-1042 12, 1.75" x 0.25" blades .011", .012", .013", .014"
.015", .016", .017", .018"
.019", .020", .022", .025"
S P A R K P L U G & F E E L E R G A U G E S
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MIS
CE
LL
AN
EO
US
173Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
Miscellaneous.qxd 6/24/05 1:50 PM Page 173
10 PIECE STANDARD FEELER GAUGE SET
Item No. Contents Sizes
MT-1048 10, 3.31" x 0.5" blades .002", 003", .004", .005", .006"
.007", .008", .010", .012", .015"
15 BLADE GO-NO-GO GAUGE
Item No. Contents Sizes
MT-1043 15, 3.31" x 0.5" blades .006" (.152 mm) to .020" (.508 mm)
(See chart for full details.)
22 BLADE GO-NO-GO IGNITION FEELER GAUGES• High grade precision milled blades insure accurate readings.• Metric and fractional sizes.
Item No. Contents Sizes
MT-1022 22, 3.31" x 0.5" blades .004" (.101 mm) to .025" (.635 mm)
(See chart for full details.)
ALL PURPOSE FEELER GAUGE
Item No. Contents Sizes
MT-1049 25, 3.31" x 0.5" blades .0015", .002", .003", .004", .005"
.006", .007", .008", .009", .010"
.011", .012", .013", .014", .015"
.016", .018", .020", .022", .024"
.025", .028", .030", .032", .035"
MADE IN
UUUU SSSS AAAAVisit us at...www.stanleyproto.com174
MIS
CE
LL
AN
EO
US
SAE Metric SAE Metric
.002"-.003" .050 mm-.076 mm .014"-.016" .356 mm-.406 mm
.003"-.004" .076 mm-.101 mm .015"-.017" .381 mm-.432 mm
.004"-.006" .101 mm-.152 mm .016"-.018" .406 mm-.457 mm
.005"-.007" .127 mm-.178 mm .017"-.019" .432 mm-.483 mm
.006"-.008" .152 mm-.203 mm .018"-.020" .457 mm-.508 mm
.007"-.009" .177 mm-.229 mm .019"-.021" .483 mm-.533 mm
.008"-.010" .203 mm-.254 mm .020"-.022" .508 mm-.559 mm
.009"-.011" .229 mm-.279 mm .021"-.023" .533 mm-.584 mm
.010"-.012" .254 mm-.305 mm .022"-.024" .559 mm-.610 mm
.011"-.013" .279 mm-.330 mm .023"-.025" .584 mm-.635 mm
.012"-.014" .305 mm-.356 mm .024"-.026" .610 mm-.660 mm
.013"-.015" .330 mm-.381 mm .025"-.027" .635 mm-.686 mm
Size Reference Chart
Miscellaneous.qxd 6/24/05 1:50 PM Page 174
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MIS
CE
LL
AN
EO
US
175Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
9/16" DISTRIBUTOR WRENCH
Item No. Weight
XT-1012 0.48 lbs.
1/2" DISTRIBUTOR WRENCH
Item No. Weight
XT-1011 0.46 lbs.
BRAKE SPRING PLIER• Comes with an adapter for lifting anchor pins.
Item No. Length Weight
PT-1262 14" 1.07 lbs.
Miscellaneous.qxd 6/24/05 1:50 PM Page 175
BALL JOINT SEPARATOR• Made of alloy steel, this tool is built for rugged use. • Comfort grip handle. • Simply place prongs between ball joint and steering knuckle to easily separate
the ball joint.
Item No. Opening Length Weight
XT-1060 0.94" 11.88" 1.62 lbs.
SHOCK ABSORBER LINK SEPARATOR• Eliminates the tough job in separating shock absorber links and the tie rod joints. • Insert the tapered wedge between the parts, hit the end of the tool with a hammer
and the part is removed.
Item No. Opening Length Weight
ZT-1550 0.75" 12" 1.52 lbs.
HOLDER RETRIEVER — FULLY FLEXIBLE• For starting a nut or screw in an inaccessible spot or retrieving parts that fall into
hard-to-reach places.
Item No. Length Weight
ZT-1180 13.5" 0.21 lbs.
TELESCOPING MAGNET TOOL• Magnetic end for retrieving tools, parts or fasteners from hard-to-reach places. • The end contains a powerful permanent magnet and is arranged on a pivot that can
be rotated 120° right or left. • The aluminum shaft with vinyl insulated handle provides a firm, secure grip. • Extends from a telescoped 16-1/2" length to 27" fully extended.
Item No. Length Weight
ZT-1193 16.5"–27" 0.36 lbs.
MADE IN
UUUU SSSS AAAAVisit us at...www.stanleyproto.com176
MIS
CE
LL
AN
EO
US
Miscellaneous.qxd 6/24/05 1:50 PM Page 176
FLEXIBLE MAGNET TOOL• Magnetic end for retrieving, flexible shaft for hard-to-reach places.• Completely nickel plated. • Flexible shaft.
Item No. Length Weight
ZT-1197 18" 0.18 lbs.
TELESCOPING INSPECTION MIRROR• For fast visual inspection of all hidden areas. • The double ball joint permits easy viewing at 360°. • Mirror telescopes to 14".• Specially designed non-rotating hex rod helps prevent mirror from swinging
out of alignment. • Mirror has a vinyl insulated handle.
Item No. Length Weight
ST-1250 14" 0.24 lbs.
5 PIECE SCREW EXTRACTOR SET• Hand forged to ensure correct angle and grip. • Used to remove broken studs, set screws, pipe and alemite fittings.
Item No. Contents Bolt Diameter Drill Size Overall Length Weight
DT-55 DT-2601 1/4" to 5/16" 1/8" 2.38" 0.02 lbs.
DT-2602 3/8" 3/16" 2.69" 0.03 lbs.
DT-2603 7/16" 15/64" 2.94" 0.05 lbs.
DT-2604 1/2" to 9/16" 5/16" 3.13" 0.08 lbs.
DT-2605 5/8" 3/8" 3.38" 0.11 lbs.
STUD EXTRACTOR• Extractor will remove or install 1/4" to 3/4" stud sizes. • Constructed to permit gripping wheel to lay flush on flat surfaces to engage stud at
lowest point if required without damage to stud threads. • Drive socket extends through entire housing to prevent binding.
Item No. Description Weight
49980 Stud Extractor 1.11 lbs.
S P E C I A L T Y T O O L S
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MIS
CE
LL
AN
EO
US
177Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
Miscellaneous.qxd 6/24/05 1:50 PM Page 177
Visit us at...www.stanleyproto.com178
MIS
CE
LL
AN
EO
US
TUBING BENDER• Quickly and easily bends 3 sizes (3/16", 1/4", 5/16") of steel or 3/8"copper tubes.• Bends up to 180°. • Nylon form prevents kinking.• Weight: 0.92 lbs.
Item No. Length
ZT-1125 6"
HEAVY-DUTY WIRE WHEEL• Use on power tools and bench grinders to remove dirt, carbon, rust, paint
and scale from metal surfaces. • Includes adapters for standard arbor holes. • Safety glasses and protective clothing are recommended while using this brush.• Weight: 1.68 lbs.
Width of Max. SafeItem No. Diameter Face Arbor Hole Free Speed
ZT-1305 6" 1.13" 0.50" 4500 RPM
CARBON CLEANING END BRUSH• Removes hard carbon deposits as well as rust and paint from metal surfaces. • Use with 1/4" drill for general metal cleaning. • Safety glasses and protective clothing are recommended while using this brush.• Weight: 0.18 lbs.
Diameter Diameter Max. SafeItem No. Face Shank Free Speed
ZT-1301 0.75" 0.25" 20,000 RPM
HEAVY-DUTY KNOT END CLEANING BRUSH• Heavy gauge wire twisted into strong knot ends for tough use.• Use with 1/4" drill or flexible shaft equipment. • Safety glasses and protective clothing are recommended while using this brush.• Weight: 0.28 lbs.
Diameter Diameter Max. SafeItem No. Face Shank Free Speed
ZT-1300 1.13" 0.25" 20,000 RPM
MADE IN
UUUU SSSS AAAA
Miscellaneous.qxd 6/24/05 1:50 PM Page 178
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
MIS
CE
LL
AN
EO
US
179Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
B E N D E R S , W I R E B R U S H E S & S C R A P E R S
HEAVY-DUTY SCRATCH BRUSH WITH SCRAPER• Thick clusters of heavy gauge wire for heavy-duty use. • 16 rows, 4 rows wide. • 1-3/16" long wires, built-in steel scraper.• Weight: 0.42 lbs.
Item No. Overall Length
ZT-1312 10"
STEEL WIRE SCRATCH BRUSH• A sturdy brush with 19 rows, 3 rows wide.• 1-3/16" long wires. • Weight: 0.34 lbs.
Item No. Overall Length
ZT-1310 14"
CARBON SCRAPER• Weight: 0.16 lbs.
Item No. Width Length
ZT-1111 1.25" 7.25"
DEGREASING SCRAPER• Weight: 0.17 lbs.
Item No. Width Length
ZT-1112 1.25" 7.25"
GASKET SCRAPER
Item No. Length Weight
ZT-1102 11" 0.25 lbs.
Miscellaneous.qxd 6/24/05 1:50 PM Page 179
Visit us at...www.stanleyproto.com180
MIS
CE
LL
AN
EO
US
DELUXE ADJUSTABLE HACKSAW FRAME• Our finest heavy-duty steel hacksaw frame guards against breakage of high-speed blades. • Impact-resistant pistol grip handle. • Adjustable frame locks on 10" and 12" blades.
Item No. Weight
FT-1204 1.78 lbs.
ADJUSTABLE HACKSAW FRAME• Handy adjustable hacksaw frame is ideal for general use. • Adjustable frame locks on 10" and 12" blades.
Item No. Weight
FT-1202 1.37 lbs.
HIGH SPEED HACKSAW BLADES• A molybdenum high speed steel blade of superb quality and durability. • Will cut nickel, high carbon steel and other tough alloys.
Item No. Length Width Thickness Teeth/in. Pkg. Qty Weight
FT-1103 12" 0.5" .025" 18 10 0.04 lbs.
FLEXIBLE HACKSAW BLADE• It is sometimes advisable to use these blades where cutting is to be done on surfaces
that are not extremely hard and where the possibility of flexing occurs.
Item No. Length Width Thickness Teeth/in. Pkg. Qty Weight
FT-1124 12" 0.5" .025" 24 10 0.04 lbs.
MADE IN
UUUU SSSS AAAA
S A W & B L A D E S
Miscellaneous.qxd 6/24/05 1:50 PM Page 180
TOOL BOARDS.
The Blackhawk™ by Proto® Merchandising Tool Board Program includes some of our best selling tools
and customized Tool Board displays which meet many needs and space requirements.
Predrilled and riveted, these boards are made of heavy-duty, tempered pegboard with durable peg hooks
and trays. Boards come ready to hang with our standard hardware kit (included). The three board styles
are designed to meet most size requirements.
As a distributor looking for a convenient and attractive counter or wall display, or as a manufacturer
wanting to control inventory, let Blackhawk™ by Proto® Tool Boards work for you!
Board Size: 24" x 24"
Board Size: 24" x 48" Board Size: 12" x 24"
Tool boards.qxd 6/24/05 1:51 PM Page 181
Visit us at...www.stanleyproto.com182
TO
OL
BO
AR
DS
Item No. Description
HW-1524 SKT 3/8" DR DEEP 6PT 3/4"32007M SKT 3/8" DR 6PT 7MM32008M SKT 3/8" DR 6PT 8MM32009M SKT 3/8" DR 6PT 9MM32010M SKT 3/8" DR 6PT 10MM32011M SKT 3/8" DR 6PT 11MM32012M SKT 3/8" DR 6PT 12MM32013M SKT 3/8" DR 6PT 13MM32014M SKT 3/8" DR 6PT 14MM32015M SKT 3/8" DR 6PT 15MM32016M SKT 3/8" DR 6PT 16MM32017M SKT 3/8" DR 6PT 17MM32018M SKT 3/8" DR 6PT 18MM32019M SKT 3/8" DR 6PT 19MM32020M SKT 3/8" DR 6PT 20MM32021M SKT 3/8" DR 6PT 21MM32022M SKT 3/8" DR 6PT 22MMHW-1507M SKT 3/8" DR DEEP 6PT 7MMHW-1508M SKT 3/8" DR DEEP 6PT 8MMHW-1509M SKT 3/8" DR DEEP 6PT 9MMHW-1510M SKT 3/8" DR DEEP 6PT 10MMHW-1511M SKT 3/8" DR DEEP 6PT 11MMHW-1512M SKT 3/8" DR DEEP 6PT 12MMHW-1513M SKT 3/8" DR DEEP 6PT 13MMHW-1514M SKT 3/8" DR DEEP 6PT 14MMHW-1515M SKT 3/8" DR DEEP 6PT 15MMHW-1517M SKT 3/8" DR DEEP 6PT 17MMHW-1520S SKT 3/8" DR SPARK PLUG 5/8"HW-1526S SKT 3/8" DR SPARK PLUG 13/16"40112 SKT 1/2" DR 12PT 3/8"40114 SKT 1/2" DR 12PT 7/16"40116 SKT 1/2" DR 12PT 1/2"40118 SKT 1/2" DR 12PT 9/16"40120 SKT 1/2" DR 12PT 5/8"40122 SKT 1/2" DR 12PT 11/16"40124 SKT 1/2" DR 12PT 3/4"40126 SKT 1/2" DR 12PT 13/16"40128 SKT 1/2" DR 12PT 7/8"40130 SKT 1/2" DR 12PT 15/16"40132 SKT 1/2" DR 12PT 1"40134 SKT 1/2" DR 12PT 1-1/16"40136 SKT 1/2" DR 12PT 1-1/8"40320 SKT 1/2" DR DEEP 12PT 5/8"40322 SKT 1/2" DR DEEP 12PT 11/16"40324 SKT 1/2" DR DEEP 12PT 3/4"40326 SKT 1/2" DR DEEP 12PT 13/16"40328 SKT 1/2" DR DEEP 12PT 7/8"40330 SKT 1/2" DR DEEP 12PT 15/16"43010M SKT 1/2" DR 12PT 10MM43011M SKT 1/2" DR 12PT 11MM43012M SKT 1/2" DR 12PT 12MM43013M SKT 1/2" DR 12PT 13MM43014M SKT 1/2" DR 12PT 14MM42015M SKT 1/2" DR 12PT 15MM42016M SKT 1/2" DR 12PT 16MM42017M SKT 1/2" DR 12PT 17MM42018M SKT 1/2" DR 12PT 18MM42019M SKT 1/2" DR 12PT 19MM42020M SKT 1/2" DR 12PT 20MM42021M SKT 1/2" DR 12PT 21MM42022M SKT 1/2" DR 12PT 22MM44017M SKT 1/2" DR DEEP 12PT 17MM44018M SKT 1/2 "DR DEEP 12PT 18MM44019M SKT 1/2" DR DEEP 12PT 19MM44021M SKT 1/2" DR DEEP 12PT 21MM44022M SKT 1/2" DR DEEP 12PT 22MM44024M SKT 1/2" DR DEEP 12PT 24MM44027M SKT 1/2" DR DEEP 12PT 27MM40326S SKT 1/2" DR SPARK PLUG 6PT 13/16"40320S SKT 1/2" DR SPARK PLUG 6PT 5/8"
1/2" & 3/8" DRIVE TOOLSBD-1 (Board Only)BD-1-TL (Tools Only)BD-1- A (Board & Tools)
Item No. Description
34993 UNIVERSAL JOINT 3/8" DR34963 ADAPTER 3/8" DR 3/8"F X 1/4"M34966 ADAPTER 3/8" DR 3/8"F X 1/2"M34984 EXTENSION 3/8" DR X 11"34989 EXTENSION 3/8" DR X 1-3/4"34988 EXTENSION 3/8" DR X 3"34987 EXTENSION 3/8" DR X 6"34946B RATCHET 3/8" DR ROUND HEAD POLISHED Q.R. 34945B RATCHET 3/8" DR ROUND HEAD 34986B FLEX HANDLE 3/8" DR X 10"49978 UNIVERSAL JOINT 1/2" DR34965 ADAPTER 1/2" DR 1/2"F X 3/8"M69992 ADAPTER INCREASING 1/2" DR 1/2"F X 3/4"M49964 EXTENSION 1/2" DR 1-13/16"49966 EXTENSION 1/2" DR 5"49990 EXTENSION 1/2" DR 10"49945B RATCHET 1/2" DR ROUND HEAD 49988B FLEX HANDLE 1/2" DR X 17"30608 SKT 3/8" DR 6PT 1/4"30010 SKT 3/8" DR 6PT 5/16"30612 SKT 3/8" DR 6PT 3/8"30614 SKT 3/8" DR 6PT 7/16"30616 SKT 3/8" DR 6PT 1/2"30618 SKT 3/8" DR 6PT 9/16"30620 SKT 3/8" DR 6PT 5/8"30622 SKT 3/8" DR 6PT 11/16"30624 SKT 3/8" DR 6PT 3/4"30626 SKT 3/8" DR 6PT 13/16"30628 SKT 3/8" DR 6PT 7/8"30630 SKT 3/8" DR 6PT 15/16"30632 SKT 3/8" DR 6PT 1"HW-1510 SKT 3/8" DR DEEP 6PT 5/16"HW-1512 SKT 3/8" DR DEEP 6PT 3/8"HW-1514 SKT 3/8" DR DEEP 6PT 7/16"HW-1516 SKT 3/8" DR DEEP 6PT 1/2"HW-1518 SKT 3/8" DR DEEP 6PT 9/16"HW-1520 SKT 3/8" DR DEEP 6PT 5/8"HW-1522 SKT 3/8" DR DEEP 6PT 11/16"
Board Size: 24" x 24"
Tool boards.qxd 6/24/05 1:51 PM Page 182
1 / 2 ” & 3 / 8 ” D R I V E T O O L S
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
TO
OL
BO
AR
DS
183Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1/2" DRIVE TOOLS BD-2 (Board Only)BD-2-TL (Tools Only)BD-2-A (Board & Tools)
Item No. Description
49978 UNIVERSAL JOINT 1/2" DR34965 ADAPTER 1/2" DR 1/2" F X 3/8" M69992 ADAPTER INCREASING 1/2" DR 1/2" F X 3/4" M49964 EXTENSION 1/2" DR 1-13/16"49966 EXTENSION 1/2" DR 5"49990 EXTENSION 1/2" DR 10"49972 EXTENSION 1/2" DR 19"49945B RATCHET 1/2" DR ROUND HEAD 49988B FLEX HANDLE 1/2" DR X 17"49946B RATCHET 1/2" DR ROUND HEAD POLISHED Q.R. 40112 SKT 1/2" DR 12PT 3/8"40114 SKT 1/2" DR 12PT 7/16"40116 SKT 1/2" DR 12PT 1/2"40118 SKT 1/2" DR 12PT 9/16"40120 SKT 1/2" DR 12PT 5/8"40122 SKT 1/2" DR 12PT 11/16"40124 SKT 1/2" DR 12PT 3/4"40126 SKT 1/2" DR 12PT 13/16"40128 SKT 1/2" DR 12PT 7/8"40130 SKT 1/2" DR 12PT 15/16"40132 SKT 1/2" DR 12PT 1"40134 SKT 1/2" DR 12PT 1-1/16"40136 SKT 1/2" DR 12PT 1-1/8"40316 SKT 1/2" DR DEEP 12PT 1/2"40318 SKT 1/2" DR DEEP 12PT 9/16"40320 SKT 1/2" DR DEEP 12PT 5/8"40322 SKT 1/2" DR DEEP 12PT 11/16"40324 SKT 1/2" DR DEEP 12PT 3/4"40326 SKT 1/2" DR DEEP 12PT 13/16"40328 SKT 1/2" DR DEEP 12PT 7/8"40330 SKT 1/2" DR DEEP 12PT 15/16"40332 SKT 1/2" DR DEEP 12PT 1"40334 SKT 1/2" DR DEEP 12PT 1-1/16"40336 SKT 1/2" DR DEEP 12PT 1-1/8"43010M SKT 1/2" DR 12PT 10MM43011M SKT 1/2" DR 12PT 11MM43012M SKT 1/2" DR 12PT 12MM43013M SKT 1/2" DR 12PT 13MM43014M SKT 1/2" DR 12PT 14MM42015M SKT 1/"2 DR 12PT 15MM42016M SKT 1/2" DR 12PT 16MM42017M SKT 1/2" DR 12PT 17MM42018M SKT 1/2" DR 12PT 18MM42019M SKT 1/2" DR 12PT 19MM42020M SKT 1/2" DR 12PT 20MM42021M SKT 1/2" DR 12PT 21MM42022M SKT 1/2" DR 12PT 22MM42023M SKT 1/2" DR 12PT 23MM42024M SKT 1/2" DR 12PT 24MM42025M SKT 1/2" DR 12PT 25MM42026M SKT 1/2" DR 12PT 26MM42027M SKT 1/2" DR 12PT 27MM42028M SKT 1/2" DR 12PT 28MM42030M SKT 1/2" DR 12PT 30MM42032M SKT 1/2" DR 12PT 32MM42036M SKT 1/2" DR 12PT 36MM44010M SKT 1/2" DR DEEP 12PT 10MM44011M SKT 1/2" DR DEEP 12PT 11MM44012M SKT 1/2" DR DEEP 12PT 12MM44013M SKT 1/2" DR DEEP 12PT 13MM44014M SKT 1/2" DR DEEP 12PT 14MM44015M SKT 1/2" DR DEEP 12PT 15MM44016M SKT 1/2" DR DEEP 12PT 16MM44017M SKT 1/2" DR DEEP 12PT 17MM44018M SKT 1/2" DR DEEP 12PT 18MM44019M SKT 1/2" DR DEEP 12PT 19MM
Item No. Description
44020M SKT 1/2" DR DEEP 12PT 20MM44021M SKT 1/2" DR DEEP 12PT 21MM44022M SKT 1/2" DR DEEP 12PT 22MM44023M SKT 1/2" DR DEEP 12PT 23MM44024M SKT 1/2" DR DEEP 12PT 24MM44025M SKT 1/2" DR DEEP 12PT 25MM44026M SKT 1/2" DR DEEP 12PT 26MM44027M SKT 1/2" DR DEEP 12PT 27MM40326S SKT 1/2" DR SPARK PLUG 6PT 13/16"40320S SKT 1/2" DR SPARK PLUG 6PT 5/8"
Board Size: 24" x 24"
Tool boards.qxd 6/24/05 1:51 PM Page 183
Visit us at...www.stanleyproto.com184
TO
OL
BO
AR
DS
COMBINATION & FLARE NUT WRENCHES BD-3 (Board Only)BD-3-TL (Tools Only)BD-3-A (Board & Tools)
Item No. Description
BW-1156FP WR COMBO POLISH 12PT 1/4"BW-1159FP WR COMBO POLISH 12PT 5/16"BW-1160FP WR COMBO POLISH 12PT 3/8"BW-1161FP WR COMBO POLISH 12PT 7/16"BW-1162FP WR COMBO POLISH 12PT 1/2"BW-1163FP WR COMBO POLISH 12PT 9/16"BW-1164FP WR COMBO POLISH 12PT 5/8"BW-1165FP WR COMBO POLISH 12PT 11/16"BW-1166FP WR COMBO POLISH 12PT 3/4"BW-1110MFP WR COMBO POLISH 12PT 10MMBW-1111MFP WR COMBO POLISH 12PT 11MMBW-1112MFP WR COMBO POLISH 12PT 12MMBW-1113MFP WR COMBO POLISH 12PT 13MMBW-1114MFP WR COMBO POLISH 12PT 14MMBW-1115MFP WR COMBO POLISH 12PT 15MMBW-1116MFP WR COMBO POLISH 12PT 16MMBW-1117MFP WR COMBO POLISH 12PT 17MMBW-1118MFP WR COMBO POLISH 12PT 18MMFN-1402P WR FLARE NUT 3/8" X 7/16"FN-1404P WR FLARE NUT 1/2" X 9/16"FN-1406P WR FLARE NUT 5/8" X11/16"FN-1410P WR FLARE NUT 3/4" X1"FN-911MP WR FLARE NUT 9MM X 11MMFN-1012MP WR FLARE NUT 10MM X 12MMFN-1314MP WR FLARE NUT 13MM X 14MMFN-1517MP WR FLARE NUT 15MM X 17MMFN-1921MP WR FLARE NUT 19MM X 21MM
OPEN END & BOX END WRENCHES BD-4 (Board Only)BD-4-TL (Tools Only)BD-4-A (Board & Tools)
Item No. Description
BWE-67MP OPEN END WR 6MM X 7MMBWE-89MP OPEN END WR 8MM X 9MMBWE-1011MP OPEN END WR 10MM X 11MMBWE-1213MP OPEN END WR 12MM X 13MMBWE-1415MP OPEN END WR 14MM X 15MMBWE-1617MP OPEN END WR 16MM X 17MMBWE-1819MP OPEN END WR 18MM X 19MMBWE-2022MP OPEN END WR 20MM X 22MM4020P OPEN END WR 1/4" X 5/16"4723P OPEN END WR 3/8" X 7/16"4724P OPEN END WR 7/16" X 1/2"4725P OPEN END WR 1/2" X 9/16"4727P OPEN END WR 5/8" X 11/16"4728P OPEN END WR 11/16" X 3/4"4732P OPEN END WR 13/16" X 7/8"BWS-1202P LONG BOX END WR 5/16" X 3/8"BWS-1206P LONG BOX END WR 7/16" X 1/2"BWS-1210P LONG BOX END WR 1/2" X 9/16"BWS-1211P LONG BOX END WR 9/16" X 5/8"BWS-1214P LONG BOX END WR 11/16" X 3/4"BWS-1216P LONG BOX END WR 13/16" X 7/8"BWS-1218P LONG BOX END WR 15/16" X 1"
Board Size: 24" x 24"
Board Size: 24" x 24"
Tool boards.qxd 6/24/05 1:51 PM Page 184
W R E N C H E S , S C R E W D R I V E R S & P L I E R S
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
TO
OL
BO
AR
DS
185Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
Board Size: 24" x 24"
Board Size: 24" x 24"
SCREWDRIVERS BD-5 (Board Only)BD-5-TL (Tools Only)BD-5-A (Board & Tools)
Item No. Description
ST-1150S S/D 2" X 1/8" POCKET SLOTTED TIP ST-1151S S/D 2" X NO. 0PT POCKET PHILLIPS® TIP ST-1214 S/D SPARK DETECTORST-1140S S/D 1-1/2" X NO. 2PT STUBBY PHILLIPS® TIP ST-1145S S/D 1-1/2" X 1/4" STUBBY SLOTTED TIPST-1081S S/D 3" X NO. 1PT PHILLIPS® TIP ST-1082S S/D 4" X NO. 2PT PHILLIPS® TIP ST-1083S S/D 6" X NO. 3PT PHILLIPS® TIP ST-1084S S/D 10" X NO. 2PT PHILLIPS® TIP ST-1043S S/D 3" X 3/16" ELEC SLOTTED TIP ST-1046S S/D 6" X 3/16" ELEC SLOTTED TIP ST-1048S S/D 10" X 3/16" ELEC SLOTTED TIP ST-1024S S/D 4" X 1/4" SQ SHANK SLOTTED TIP ST-1026S S/D 6" X 5/16" SQ SHANK SLOTTED TIP ST-1028S S/D 8" X 3/8" SQ SHANK SLOTTED TIP ST-1032S S/D 10" X 3/8" SQ SHANK SLOTTED TIP ST-1006S S/D 6" X 5/16" SLOTTED TIP ST-1008S S/D 8" X 3/8" SLOTTED TIP ST-1010S S/D 10" X 3/8" SLOTTED TIP ST-608S S/D TORX® T8 ST-610S S/D TORX® T10 ST-615S S/D TORX® T15 St-620S S/D TORX® T20 ST-625S S/D TORX® T25 ST-627S S/D TORX® T27
PLIERS BD-6 (Board Only)BD-6-TL (Tools Only)BD-6-A (Board & Tools)
Item No. Description
PT-1002-1 PLIERS HD SLIP JOINT 6" PT-1003-1 PLIERS SLIP JOINT COMB 8" PT-1004-1 PLIERS SLIP JOINT COMB 10" PT-1250-1 PLIERS RIBLOCK 10" PT-1248-1 PLIERS LARGE RIBLOCK 12-3/4" PT-1259 PLIERS BATTERY 7"PT-1280-1 PLIERS HOSE CLAMP 8" PT-1107 PLIERS LOCKING 7" STRAIGHT JAWPT-1110 PLIERS LOCKING 10" CURVED JAWPT-1052-1 PLIERS DIAG CUTTING 6" PT-1105 PLIERS LOCKING 5" CURVED JAWPT-1106 PLIERS LOCKING 6" LONG NOSEPT-1108-1 PLIERS LINESMAN 8" PT-1128-1 PLIERS LONGNOSE SIDECUT 6-1/2" PT-1149-1 PLIERS CURVED NEEDLE NOSE 6" PT-1050 PLIERS WIRE STRIPPER CRIMPER 8"PT-1057-1 PLIERS HD DIAG CUTTING 7" PT-1060-1 PLIERS LG DIAG CUTTING 7" PT-1178 PLIERS DUCKBILL WIRING 8"PT-1300 PLIERS STRAIGHT NOSE LONG REACH 11-1/2"PT-1310 PLIERS BENT NOSE LONG REACH 11-1/2"PT-1320 PLIERS LONG REACH CUTTER/GRIPPER 11"
Tool boards.qxd 6/24/05 1:51 PM Page 185
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.Visit us at...
www.stanleyproto.com186
TO
OL
BO
AR
DS
Item No. Description
HW-1510 SKT 3/8" DR DEEP 6PT 5/16"HW-1512 SKT 3/8" DR DEEP 6PT 3/8"HW-1514 SKT 3/8" DR DEEP 6PT 7/16"HW-1516 SKT 3/8" DR DEEP 6PT 1/2"HW-1518 SKT 3/8" DR DEEP 6PT 9/16"HW-1520 SKT 3/8" DR DEEP 6PT 5/8"HW-1522 SKT 3/8" DR DEEP 6PT 11/16"HW-1524 SKT 3/8" DR DEEP 6PT 3/4"HW-1526 SKT 3/8" DR DEEP 6PT 13/16"HW-1528 SKT 3/8" DR DEEP 6PT 7/8"HW-1530 SKT 3/8" DR DEEP 6PT 15/16"HW-1532 SKT 3/8" DR DEEP 6PT 1"HW-1507M SKT 3/8" DR DEEP 6PT 7MMHW-1508M SKT 3/8" DR DEEP 6PT 8MMHW-1509M SKT 3/8" DR DEEP 6PT 9MMHW-1510M SKT 3/8" DR DEEP 6PT 10MMHW-1511M SKT 3/8" DR DEEP 6PT 11MMHW-1512M SKT 3/8" DR DEEP 6PT 12MMHW-1513M SKT 3/8" DR DEEP 6PT 13MMHW-1514M SKT 3/8" DR DEEP 6PT 14MMHW-1515M SKT 3/8" DR DEEP 6PT 15MMHW-1517M SKT 3/8" DR DEEP 6PT 17MMHW-1518M SKT 3/8" DR DEEP 6PT 18MMHW-1519M SKT 3/8" DR DEEP 6PT 19MM30212 SKT 3/8" DR UNIVERSAL 6PT 3/8"30224 SKT 3/8" DR UNIVERSAL 6PT 3/4"30209M SKT 3/8" DR UNIVERSAL 6PT 9MM 30210M SKT 3/8" DR UNIVERSAL 6PT 10MM 30211M SKT 3/8" DR UNIVERSAL 6PT 11MM 30212M SKT 3/8" DR UNIVERSAL 6PT 12MM 30213M SKT 3/8" DR UNIVERSAL 6PT 13MM30214M SKT 3/8" DR UNIVERSAL 6PT 14MM 30215M SKT 3/"8 DR UNIVERSAL 6PT 15MM 30214 SKT 3/8" DR UNIVERSAL 6PT 7/16"30320S SKT 3/8" DR UNIVERSAL SPARK PLUG 5/8"30216 SKT 3/8" DR UNIVERSAL 6PT 1/2"30218 SKT 3/8" DR UNIVERSAL 6PT 9/16"30220 SKT 3/8" DR UNIVERSAL 6PT 5/8"30222 SKT 3/8" DR UNIVERSAL 6PT 11/16" 30326 SKT 3/8" DR UNIVERSAL SPARK PLUG 13/16"34993 UNIVERSAL JOINT 3/8" DRHW-1520S SKT 3/8" DR SPARK PLUG 5/8"HW-1526S SKT 3/8" DR SPARK PLUG 13/16"34983 EXTENSION 3/8" DR X 19"34989 EXTENSION 3/8" DR X 1 3/4"34988 EXTENSION 3/8" DR X 3"34987 EXTENSION 3/8" DR X 6"34984 EXTENSION 3/8" DR X 11"34963 ADAPTER 3/8" DR 3/8"F X 1/4"M34966 ADAPTER 3/8" DR 3/8"F X 1/2"M34945B RATCHET 3/8" DR ROUND HEAD 34948B RATCHET 3/8" DR ROUND HEAD MINI FLEX 34946B RATCHET 3/8" DR ROUND HEAD POLISHED Q.R. 34935B RATCHET 3/8" DR ROUND HEAD FLEX 34947B RATCHET 3/8" DR BENT FLEX HANDLE 34986B FLEX HANDLE 3/8" DR X 10"
3/8" DRIVE TOOLSBD-7 (Board Only)BD-7-TL (Tools Only)BD-7-A (Board & Tools)
Item No. Description
30608 SKT 3/8" DR 6PT 1/4"30010 SKT 3/8" DR 6PT 5/16"30612 SKT 3/8" DR 6PT 3/8"30614 SKT 3/8" DR 6PT 7/16"30616 SKT 3/8" DR 6PT 1/2"30618 SKT 3/8" DR 6PT 9/16"30620 SKT 3/8" DR 6PT 5/8"30622 SKT 3/8" DR 6PT 11/16"30624 SKT 3/8" DR 6PT 3/4"30626 SKT 3/8" DR 6PT 13/16"30628 SKT 3/8" DR 6PT 7/8"30630 SKT 3/8" DR 6PT 15/16"30632 SKT 3/8" DR 6PT 1"31108 SKT 3/8" 8PT 1/4" 31110 SKT 3/8" 8PT 5/16" 31112 SKT 3/8" 8PT 3/8" 31114 SKT 3/8" 8PT 7/16" 31116 SKT 3/8" 8PT 1/2" 32007M SKT 3/8" DR 6PT 7MM32008M SKT 3/8" DR 6PT 8MM32009M SKT 3/8" DR 6PT 9MM32010M SKT 3/8" DR 6PT 10MM32011M SKT 3/8" DR 6PT 11MM32012M SKT 3/8" DR 6PT 12MM32013M SKT 3/8" DR 6PT 13MM32014M SKT 3/8" DR 6PT 14MM32015M SKT 3/8" DR 6PT 15MM32016M SKT 3/8" DR 6PT 16MM32017M SKT 3/8" DR 6PT 17MM32018M SKT 3/8" DR 6PT 18MM32019M SKT 3/8" DR 6PT 19MM32020M SKT 3/8" DR 6PT 20MM32021M SKT 3/8" DR 6PT 21MM32022M SKT 3/8" DR 6PT 22MM
Board Size: 24" x 24"
Tool boards.qxd 6/24/05 1:51 PM Page 186
3 / 8 ” & 1 / 4 ” D R I V E T O O L S
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
TO
OL
BO
AR
DS
187Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1/4" DRIVE TOOLS BD-8 (Board Only)BD-8-TL (Tools Only)BD-8-A (Board & Tools)
Item No. Description
GW-1605 SKT 1/4" DR 6PT 5/32" GW-1606 SKT 1/4" DR 6PT 3/16" GW-1607 SKT 1/4" DR 6PT 7/32" GW-1608 SKT 1/4" DR 6PT 1/4" GW-1609 SKT 1/4" DR 6PT 9/32" GW-1610 SKT 1/4" DR 6PT 5/16" GW-1611 SKT 1/4" DR 6PT 11/32" GW-1612 SKT 1/4" DR 6PT 3/8" GW-1614 SKT 1/4" DR 6PT 7/16" GW-1616 SKT 1/4" DR 6PT 1/2" GW-1208 SKT 1/4" DR 8PT 1/4" GW-1210 SKT 1/4" DR 8PT 5/16" GW-1706 SKT 1/4" DR 12PT 3/16" GW-1707 SKT 1/4" DR 12PT 7/32" GW-1708 SKT 1/4" DR 12PT 1/4" GW-1709 SKT 1/4" DR 12PT 9/32" GW-1710 SKT 1/4" DR 12PT 5/16" GW-1711 SKT 1/4" DR 12PT 11/32" GW-1712 SKT 1/4" DR 12PT 3/8" GW-1714 SKT 1/4" DR 12PT 7/16" GW-1716 SKT 1/4" DR 12PT 1/2" GW-604M SKT 1/4" DR 6PT 4MM GW-645M SKT 1/4" DR 6PT 4.5MM GW-605M SKT 1/4" DR 6PT 5MM GW-655M SKT 1/4" DR 6PT 5.5MM GW-606m SKT 1/4" DR 6PT 6MM GW-607M SKT 1/4" DR 6PT 7MM GW-608M SKT 1/4" DR 6PT 8MM GW-609M SKT 1/4" DR 6PT 9MM GW-610M SKT 1/4" DR 6PT 10MM GW-611M SKT 1/4" DR 6PT 11MM GW-612M SKT 1/4" DR 6PT 12MM GW-613M SKT 1/4" DR 6PT 13MM GW-1506 SKT 1/4" DR DEEP 6PT 3/16"GW-1507 SKT 1/4" DR DEEP 6PT 7/32" GW-1508 SKT 1/4" DR DEEP 6PT 1/4" GW-1509 SKT 1/4" DR DEEP 6PT 9/32" GW-1510 SKT 1/4" DR DEEP 6PT 5/16"GW-1511 SKT 1/4" DR DEEP 6PT 11/32" GW-1512 SKT 1/4" DR DEEP 6PT 3/8" GW-1514 SKT 1/4" DR DEEP 6PT 7/16" GW-1516 SKT 1/4" DR DEEP 6PT 1/2" GW-504M SKT 1/4" DR DEEP 6PT 4MM GW-505M SKT 1/4" DR DEEP 6PT 5MM GW-506M SKT 1/4" DR DEEP 6PT 6MM GW-507M SKT 1/4" DR DEEP 6PT 7MM GW-508M SKT 1/4" DR DEEP 6PT 8MM GW-509M SKT 1/4" DR DEEP 6PT 9MM GW-510M SKT 1/4" DR DEEP 6PT 10MM GW-511M SKT 1/4" DR DEEP 6PT 11MM GW-512M SKT 1/4" DR DEEP 6PT 12MM GW-513M SKT 1/4" DR DEEP 6PT 13MM GW-9898 EXTENSION 1/4" DR X 3" GW-9899 EXTENSION 1/4" DR X 6" 34960 ADAPTER 1/4" DR 1/4" F X 3/8" M GW-9550 SPINNER HANDLE 1/4" DR Gw-9545 SPINNER FLEX HANDLE 1/4" DR GW-9578 UNIVERSAL JOINT 1/4" DR GW-9749B FLEX HANDLE 1/4" DR X 6" GW-9945B RATCHET 1/4" DR ROUND HEAD GW-9935B RATCHET 1/4" DR ROUND HEAD FLEX
Board Size: 12" x 24"
Tool boards.qxd 6/24/05 1:51 PM Page 187
Visit us at...www.stanleyproto.com188
TO
OL
BO
AR
DS
HAMMERSBD-9 (Board Only)BD-9-TL (Tools Only)BD-9-A (Board & Tools)
Item No. Description
HT-1005-1 HAMMER BALL PEIN 16 OZHT-1007-1 HAMMER BALL PEIN 24 OZHT-1008-1 HAMMER BALL PEIN 32 OZHT-1453 HAMMER SOFT FACE 20 OZHT-1452T HAMMER REPLACEMENT TIP57-530 COMPO-CAST® 10 OZ57-531 COMPO-CAST® 18 OZ57-532 COMPO-CAST® 21 OZ57-522 RUBBER MALLET 18 OZ
3/4" DRIVE TOOLS BD-10 (Board Only)BD-10-TL (Tools Only)BD-10-A (Board & Tools)
Item No. Description
60028 SKT 3/4" DR 12PT 7/8"60030 SKT 3/8" DR 12PT 15/16"60032 SKT 3/4" DR 12PT 1"60034 SKT 3/4" DR 12PT 1-1/16"60036 SKT 3/4" DR 12PT 1-1/8"60038 SKT 3/4" 12PT 1-3/16"60040 SKT 3/4" DR 12PT 1-1/4"60042 SKT 3/4" DR 12PT 1-5/16"60044 SKT 3/4" DR 12PT 1-3/8"60046 SKT 3/4" DR 12PT 1-7/16"60048 SKT 3/4" DR 12PT 1-1/2"60050 SKT 3/4" DR 12PT 1-9/16"60052 SKT 3/4" DR 12PT 1-5/8"60054 SKT 3/4" DR 12PT 1-11/16"60056 SKT 3/4" DR 12PT 1-3/4"60058 SKT 3/4" DR 12PT 1-13/16"60060 SKT 3/4" DR 12PT 1-7/8"60064 SKT 3/4" DR 12PT 2"60068 SKT 3/4" DR 12PT 2-1/8"60070 SKT 3/4" DR 12PT 2-3/16"60072 SKT 3/4" DR 12PT 2-1/4"60076 SKT 3/4" DR 12PT 2-3/8"69993 EXTENSION 3/4" DR 4"69995 EXTENSION 3/4" DR 8"69994 EXTENSION 3/4" DR 16"69997 SLIDING TEE HANDLE 3/4" DR X 18"69998 FLEX HANDLE 3/4" DR X 19"69945B RATCHET 3/4" DR ROUND HEAD J5853 3/4" F x 1" M DRIVE ADAPTER49991 ADAPTER REDUCING 3/4" F -1/2"
Board Size: 24" x 24"
Board Size: 24" x 24"
Tool boards.qxd 6/24/05 1:51 PM Page 188
H A M M E R S , 3 / 4 ” D R I V E & 3 / 8 ” I M P A C T D R I V E T O O L S
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
TO
OL
BO
AR
DS
189Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
3/8" DRIVE IMPACT TOOLSBD-12 (Board Only)BD-12-TL (Tools Only)BD-12-A (Board & Tools)
Item No. Description
U-1508 SKT 3/8" DR IMPACT 6PT 1/4"U-1510 SKT 3/8" DR IMPACT 6PT 5/16"U-1512 SKT 3/8" DR IMPACT 6PT 3/8"U-1514 SKT 3/8" DR IMPACT 6PT 7/16"U-1516 SKT 3/8" DR IMPACT 6PT 1/2"U-1518 SKT 3/8" DR IMPACT 6PT 9/16"U-1520 SKT 3/8" DR IMPACT 6PT 5/8"U-1522 SKT 3/8" DR IMPACT 6PT 11/16"U-1524 SKT 3/8" DR IMPACT 6PT 3/4" U-1508M SKT 3/8" DR IMPACT 6PT 8MM U-1509M SKT 3/8" DR IMPACT 6PT 9MM U-1510M SKT 3/8" DR IMPACT 6PT 10MM U-1512M SKT 3/8" DR IMPACT 6PT 12MM U-1513M SKT 3/8" DR IMPACT 6PT 13MM U-1514M SKT 3/8" DR IMPACT 6PT 14MM U-1515M SKT 3/8" DR IMPACT 6PT 15MM U-1517M SKT 3/8" DR IMPACT 6PT 17MM U-1518M SKT 3/8" DR IMPACT 6PT 18MM U-1519M SKT 3/8" DR IMPACT 6PT 19MM U-1612 SKT 3/8" DR IMPACT DEEP 6PT 3/8" U-1614 SKT 3/8" DR IMPACT DEEP 6PT 7/16" U-1616 SKT 3/8" DR IMPACT DEEP 6PT 1/2"U-1618 SKT 3/8" DR IMPACT DEEP 6PT 9/16" U-1620 SKT 3/8" DR IMPACT DEEP 6PT 5/8" U-1622 SKT 3/8" DR IMPACT DEEP 6PT 11/16"U-1624 SKT 3/8" DR IMPACT DEEP 6PT 3/4" U-1610 SKT 3/8" DR IMPACT DEEP 6PT 15/16" U-1608M SKT 3/8" DR IMPACT 6PT 8MM U-1609M SKT 3/8" DR IMPACT 6PT 9MM U-1610M SKT 3/8" DR IMPACT 6PT 10MM U-1611M SKT 3/8" DR IMPACT 6PT 11MM U-1612M SKT 3/8" DR IMPACT 6PT 12MM U-1613M SKT 3/8" DR IMPACT 6PT 13MM U-1614M SKT 3/8" DR IMPACT 6PT 14MM U-1615M SKT 3/8" DR IMPACT 6PT 15MM U-1616M SKT 3/8" DR IMPACT 6PT 16MM U-1617M SKT 3/8" DR IMPACT 6PT 17MM U-1618M SKT 3/8" DR IMPACT 6PT 18MM U-1619M SKT 3/8" DR IMPACT 6PT 19MM
Board Size: 12" x 24"
Tool boards.qxd 6/24/05 1:51 PM Page 189
Visit us at...www.stanleyproto.com190
TO
OL
BO
AR
DS
1/2" DRIVE IMPACT TOOLS BD-14 (Board Only)BD-14-TL (Tools Only)BD-14-A (Board & Tools)
Item No. Description
49976 UNIVERSAL JOINT IMPACT 1/2" DRUW-24 EXTENSION IMPACT 1/2" DR X 5"UW-30 EXTENSION IMPACT 1/2" DR X 2-5/8"UW-25 EXTENSION IMPACT 1/2" DR X 10"UW-1612 SKT 1/2" DR IMPACT 6PT 3/8"UW-1614 SKT 1/2" DR IMPACT 6PT 7/16"UW-1616 SKT 1/2" DR IMPACT 6PT 1/2"UW-1618 SKT 1/2" DR IMPACT 6PT 9/16"UW-1620 SKT 1/2" DR IMPACT 6PT 5/8"UW-1622 SKT 1/2" DR IMPACT 6PT 11/16"UW-1624 SKT 1/2" DR IMPACT 6PT 3/4"UW-1626 SKT 1/2" DR IMPACT 6PT 13/16"UW-1628 SKT 1/2" DR IMPACT 6PT 7/8"UW-1630 SKT 1/2" DR IMPACT 6PT 15/16"UW-1632 SKT 1/2" DR IMPACT 6PT 1"UW-1634 SKT 1/2" DR IMPACT 6PT 1-1/16"UW-1636 SKT 1/2" DR IMPACT 6PT 1-1/8"UW-1638 SKT 1/2" DR IMPACT 6PT 1-3/16"UW-1640 SKT 1/2" DR IMPACT 6PT 1-1/4"UW-1512 SKT 1/2" DR IMPACT DEEP 6PT 3/8"UW-1514 SKT 1/2" DR IMPACT DEEP 6PT 7/16"UW-1516 SKT 1/2" DR IMPACT DEEP 6PT 1/2"UW-1518 SKT 1/2" DR IMPACT DEEP 6PT 9/16"UW-1520 SKT 1/2" DR IMPACT DEEP 6PT 5/8"UW-1522 SKT 1/2" DR IMPACT DEEP 6PT 11/16"UW-1524 SKT 1/2" DR IMPACT DEEP 6PT 3/4"UW-1526 SKT 1/2" DR IMPACT DEEP 6PT 13/16"UW-1528 SKT 1/2" DR IMPACT DEEP 6PT 7/8"UW-1530 SKT 1/2" DR IMPACT DEEP 6PT 15/16"UW-1532 SKT 1/2" DR IMPACT DEEP 6PT 1"UW-1534 SKT 1/2" DR IMPACT DEEP 6PT 1-1/16"UW-1536 SKT 1/2" DR IMPACT DEEP 6PT 1-1/8"UW-610M SKT 1/2" DR IMPACT 6PT 10MMUW-611M SKT 1/2" DR IMPACT 6PT 11MMUW-612M SKT 1/2" DR IMPACT 6PT 12MMUW-613M SKT 1/2" DR IMPACT 6PT 13MMUW-614M SKT 1/2" DR IMPACT 6PT 14MMUW-615M SKT 1/2" DR IMPACT 6PT 15MMUW-616M SKT 1/2" DR IMPACT 6PT 16MMUW-617M SKT 1/2" DR IMPACT 6PT 17MMUW-618M SKT 1/2" DR IMPACT 6PT 18MMUW-619M SKT 1/2" DR IMPACT 6PT 19MMUW-621M SKT 1/2" DR IMPACT 6PT 21MMUW-622M SKT 1/2" DR IMPACT 6PT 22MMUW-624M SKT 1/2" DR IMPACT 6PT 24MMUW-627M SKT 1/2" DR IMPACT 6PT 27MMUW-510M SKT 1/2" DR IMPACT DEEP 6PT 10MM UW-511M SKT 1/2" DR IMPACT DEEP 6PT 11MM UW-512M SKT 1/2" DR IMPACT DEEP 6PT 12MM UW-513M SKT 1/2" DR IMPACT DEEP 6PT 13MM UW-514M SKT 1/2" DR IMPACT DEEP 6PT 14MM UW-515M SKT 1/2" DR IMPACT DEEP 6PT 15MM UW-516M SKT 1/2" DR IMPACT DEEP 6PT 16MM UW-517M SKT 1/2" DR IMPACT DEEP 6PT 17MM UW-518M SKT 1/2" DR IMPACT DEEP 6PT 18MM UW-519M SKT 1/2" DR IMPACT DEEP 6PT 19MM UW-520M SKT 1/2" DR IMPACT DEEP 6PT 20MM UW-521M SKT 1/2" DR IMPACT DEEP 6PT 21MM UW-522M SKT 1/2" DR IMPACT DEEP 6PT 22MM UW-524M SKT 1/2" DR IMPACT DEEP 6PT 24MM UW-526M SKT 1/2" DR IMPACT DEEP 6PT 26MM UW-527M SKT 1/2" DR IMPACT DEEP 6PT 27MM UW-1500 SKT 1/2" DR IMPACT WHEEL LUGUWP-430M SKT 1/2" DR AXLE NUT DEEP 6PT 30MMUWP-436M SKT 1/2" DR AXLE NUT DEEP 6PT 36MM
Board Size: 24" x 24"
Tool boards.qxd 6/24/05 1:51 PM Page 190
1 / 2 ” , 3 / 4 ” D R I V E I M P A C T T O O L S & P U L L E R S
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
TO
OL
BO
AR
DS
191Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
PULLERSBD-15 (Board Only)BD-15-TL (Tools Only)BD-15-A (Board & Tools)
Item No. Description
ET-1005 PULLER MIDGET GEARET-1007 PULLER 6 REVERSABLE GEARET-1010 PULLER 9 REVERSIBLE GEARET-1068A PULLER PILOT BEARINGET-1071A PULLER BATTERY TERMINALET-1205 PULLER TAPERED BEARING 2-1/4"ET-1207 PULLER TAPERED BEARING 4-1/2"ET-1322 PULLER GEAR AND PULLEYET-1328A PULLER STEERING WHEELET-1710 PULLER BODY DENT
3/4" DRIVE IMPACT TOOLS BD-16 (Board Only)BD-16-TL (Tools Only)BD-16-A (Board & Tools)
Item No. Description
UW-2424 SKT 3/4" DR IMPACT 6PT 3/4" UW-2426 SKT 3/4" DR IMPACT 6PT 13/16"UW-2428 SKT 3/4" DR IMPACT 6PT 7/8"UW-2430 SKT 3/4" DR IMPACT 6PT 15/16"UW-2432 SKT 3/4" DR IMPACT 6PT 1"UW-2434 SKT 3/4" DR IMPACT 6PT 1-1/16"UW-2436 SKT 3/4" DR IMPACT 6PT 1-1/8"UW-2438 SKT 3/4" DR IMPACT 6PT 1-3/16"UW-2440 SKT 3/4" DR IMPACT 6PT 1-1/4"UW-2442 SKT 3/4" DR IMPACT 6PT 1-5/16"UW-2444 SKT 3/4" DR IMPACT 6PT 1-3/8"UW-2446 SKT 3/4" DR IMPACT 6PT 1-7/16"UW-2448 SKT 3/4" DR IMPACT 6PT 1-1/2"UW-2624 SKT 3/4" DR IMPACT DEEP 6PT 3/4" UW-2626 SKT 3/4" DR IMPACT DEEP 6PT 13/16"UW-2628 SKT 3/4" DR IMPACT DEEP 6PT 7/8"UW-2630 SKT 3/4" DR IMPACT DEEP 6PT 15/16"UW-2632 SKT 3/4" DR IMPACT DEEP 6PT 1"UW-2634 SKT 3/4" DR IMPACT DEEP 6PT 1-1/16"UW-2636 SKT 3/4" DR IMPACT DEEP 6PT 1-1/8"UW-2638 SKT 3/4" DR IMPACT DEEP 6PT 1-3/16"UW-2640 SKT 3/4" DR IMPACT DEEP 6PT 1-1/4"UW-2642 SKT 3/4" DR IMPACT DEEP 6PT 1-5/16"UW-2644 SKT 3/4" DR IMPACT DEEP 6PT 1-3/8"UW-2646 SKT 3/4" DR IMPACT DEEP 6PT 1-7/16"UW-2648 SKT 3/4" DR IMPACT DEEP 6PT 1-1/2"
Board Size: 24" x 24"
Board Size: 12" x 24"
Tool boards.qxd 6/24/05 1:51 PM Page 191
Visit us at...www.stanleyproto.com192
TO
OL
BO
AR
DS
NUT DRIVERS BD-18 (Board Only)BD-18-TL (Tools Only)BD-18-A (Board & Tools)
Item No. Description
ST-800 NUT DRIVER 3/16" ST-803 NUT DRIVER 1/4" ST-806 NUT DRIVER 5/16" ST-809 NUT DRIVER 11/32" ST-812 NUT DRIVER 3/8" ST-815 NUT DRIVER 7/16" ST-818 NUT DRIVER 1/2" ST-905M NUT DRIVER 5MMST-955M NUT DRIVER 5.5MMST-907M NUT DRIVER 7MMST-908M NUT DRIVER 8MMST-909M NUT DRIVER 9MMST-910M NUT DRIVER 10MMST-911M NUT DRIVER 11MMST-828 SET NUT DRIVER STANDARD 8 PCST-829M SET NUT DRIVER METRIC 9 PC
Board Size: 24" x 24"
Tool boards.qxd 6/24/05 1:51 PM Page 192
N U T D R I V E R S & 1 / 4 ” , 3 / 8 ” , 1 / 2 ” D R I V E T O O L S
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
TO
OL
BO
AR
DS
193Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1/4", 3/8", 1/2" DRIVE TOOLS BD-21 (Board Only)BD-21-TL (Tools Only)BD-21-A (Board & Tools)
Item No. Description
GW-604M SKT 1/4" DR 6PT 4MM GW-605M SKT 1/4" DR 6PT 5MM GW-606m SKT 1/4" DR 6PT 6MM GW-607M SKT 1/4" DR 6PT 7MM GW-608M SKT 1/4" DR 6PT 8MM GW-609M SKT 1/4" DR 6PT 9MM GW-610M SKT 1/4" DR 6PT 10MM GW-611M SKT 1/4" DR 6PT 11MM GW-612M SKT 1/4" DR 6PT 12MM GW-613M SKT 1/4" DR 6PT 13MM GW-1605 SKT 1/4" DR 6PT 5/32" GW-1606 SKT 1/4" DR 6PT 3/16" GW-1607 SKT 1/4" DR 6PT 7/32" GW-1608 SKT 1/4" DR 6PT 1/4" GW-1609 SKT 1/4" DR 6PT 9/32" GW-1610 SKT 1/4" DR 6PT 5/16" GW-1611 SKT 1/4" DR 6PT 11/32" GW-1612 SKT 1/4" DR 6PT 3/8" GW-1614 SKT 1/4" DR 6PT 7/16" GW-1616 SKT 1/4" DR 6PT 1/2" GW-504M SKT 1/4" DR DEEP 6PT 4MM GW-505M SKT 1/4" DR DEEP 6PT 5MM GW-506M SKT 1/4" DR DEEP 6PT 6MM GW-507M SKT 1/4" DR DEEP 6PT 7MM GW-508M SKT 1/4" DR DEEP 6PT 8MM GW-509M SKT 1/4" DR DEEP 6PT 9MMGW-510M SKT 1/4" DR DEEP 6PT 10MM GW-511M SKT 1/4" DR DEEP 6PT 11MM GW-512M SKT 1/4" DR DEEP 6PT 12MM GW-513M SKT 1/4" DR DEEP 6PT 13MMGW-1506 SKT 1/4" DR DEEP 6PT 3/16" GW-1507 SKT 1/4" DR DEEP 6PT 7/32" GW-1508 SKT 1/4" DR DEEP 6PT 1/4" GW-1509 SKT 1/4" DR DEEP 6PT 9/32" GW-1510 SKT 1/4" DR DEEP 6PT 5/16"GW-1511 SKT 1/4" DR DEEP 6PT 11/32" GW-1512 SKT 1/4" DR DEEP 6PT 3/8" GW-1514 SKT 1/4" DR DEEP 6PT 7/16" GW-1516 SKT 1/4" DR DEEP 6PT 1/2" GW-9898 EXTENSION 1/4" DR X 3" GW-9899 EXTENSION 1/4" DR X 6" 34960 ADAPTER 1/4" DR 1/4" F X 3/8" M GW-9945B RATCHET 1/4" DR ROUND HEAD GW-9550 SPINNER HANDLE 1/4" DR GW-9578 UNIVERSAL JOINT 1/4" DR32010M SKT 3/8" DR 6PT 10MM 32011M SKT 3/8" DR 6PT 11MM 32012M SKT 3/8" DR 6PT 12MM 32013M SKT 3/8" DR 6PT 13MM 32014M SKT 3/8" DR 6PT 14MM 32015M SKT 3/8" DR 6PT 15MM32016M SKT 3/8" DR 6PT 16MM 30608 SKT 3/8" DR 6PT 1/4" 30010 SKT 3/8" DR 6PT 5/16" 30612 SKT 3/8" DR 6PT 3/8" 30614 SKT 3/8" DR 6PT 7/16" 30616 SKT 3/8" DR 6PT 1/2" 30618 SKT 3/8" DR 6PT 9/16" 30620 SKT 3/8" DR 6PT 5/8" 30622 SKT 3/8" DR 6PT 11/16" 30624 SKT 3/8" DR 6PT 3/4" HW-1507M SKT 3/8" DR DEEP 6PT 7MM HW-1508M SKT 3/8" DR DEEP 6PT 8MM HW-1509M SKT 3/8" DR DEEP 6PT 9MM HW-1510M SKT 3/8" DR DEEP 6PT 10MM HW-1511M SKT 3/8" DR DEEP 6PT 11MM HW-1512M SKT 3/8" DR DEEP 6PT 12MMHW-1513M SKT 3/8" DR DEEP 6PT 13MM HW-1510 SKT 3/8" DR DEEP 6PT 5/16"
Item No. Description
HW-1512 SKT 3/8" DR DEEP 6PT 3/8" HW-1514 SKT 3/8" DR DEEP 6PT 7/16" HW-1516 SKT 3/8" DR DEEP 6PT 1/2 HW-1518 SKT 3/8" DR DEEP 6PT 9/16 HW-1520 SKT 3/8" DR DEEP 6PT 5/8" HW-1522 SKT 3/8" DR DEEP 6PT 11/16" HW-1524 SKT 3/8" DR DEEP 6PT 3/4" HW-1520S SKT 3/8" DR SPARK PLUG 5/8" HW-1526S SKT 3/8" DR SPARK PLUG 13/16" 34989 EXTENSION 3/8" DR X 1-3/4" 34988 EXTENSION 3/8" DR X 3" 34984 EXTENSION 3/8" DR X 11 34963 ADAPTER 3/8" DR 3/8" F X 1/4" M 34966 ADAPTER 3/8" DR 3/8" F X 1/2" M 34993 UNIVERSAL JOINT 3/8" DR 34945B RATCHET 3/8" DR ROUND HEAD 40612 SKT 1/2" DR 6PT 3/8" 40614 SKT 1/2" DR 6PT 7/16" 40616 SKT 1/2" DR 6PT 1/2" 40618 SKT 1/2" DR 6PT 9/16" 40620 SKT 1/2" DR 6PT 5/8" 40622 SKT 1/2" DR 6PT 11/16" 40624 SKT 1/2" DR 6PT 3/4" 40626 SKT 1/2" DR 6PT 13/16" 40628 SKT 1/2" DR 6PT 7/8" 40630 SKT 1/2" DR 6PT 15/16 40632 SKT 1/2" DR 6PT 1 40634 SKT 1/2" DR 6PT 1-1/16" 40636 SKT 1/2" DR 6PT 1-1/8"43013M SKT 1/2" DR 12PT 13MM 43014M SKT 1/2" DR 12PT 14MM 42015M SKT 1/2" DR 12PT 15MM 42018M SKT 1/2" DR 12PT 18MM 42016M SKT 1/2" DR 12PT 16MM 42017M SKT 1/2" DR 12PT 17MM 42019M SKT 1/2" DR 12PT 19MM 42020M SKT 1/2" DR 12PT 20MM 42021M SKT 1/2" DR 12PT 21MM 42022M SKT 1/2" DR 12PT 22MM 42024M SKT 1/2 "DR 12PT 24MM 42027M SKT 1/2" DR 12PT 27MM 42030M SKT 1/2" DR 12PT 30MM 34987 EXTENSION 3/8" DR X 6" 49966 EXTENSION 1/2" DR 5 49990 EXTENSION 1/2" DR 10 34965 ADAPTER 1/2" DR 1/2" F X 3/8" M 49978 UNIVERSAL JOINT 1/2" DR 49945B RATCHET 1/2" DR ROUND HEAD
Board Size: 24" x 24"
Tool boards.qxd 6/24/05 1:51 PM Page 193
Phillips® is a registered trademark of Phillips Screw Co.Visit us at...www.stanleyproto.com194
TO
OL
BO
AR
DS
SCREWDRIVERS & PLIERSBD-23 (Board Only)BD-23-TL (Tools Only)BD-23-A (Board & Tools)
Item No. Description
AW-1006-1 WRENCH ADJUSTABLE 6" AW-1010-1 WRENCH ADJUSTABLE 10" ST-1214 S/D SPARK DETECTOR ST-1151S S/D 2" X NO. 0PT POCKET PHILLIPS® TIP ST-1150S S/D 2" X 1/8" POCKET SLOTTED TIP ST-1043S S/D 3" X 3/16" ELEC SLOTTED TIP ST-1046S S/D 6" X 3/16" ELEC SLOTTED TIP ST-1081S S/D 3 X NO. 1PT PHILLIPS® TIP ST-1082S S/D 4" X NO. 2PT PHILLIPS® TIP ST-1004S S/D 4" X 1/4" SLOTTED TIP ST-1006S S/D 6" X 5/16" SLOTTED TIP ST-1008S S/D 8" X 3/8" SLOTTED TIP ST-1024S S/D 4" X 1/4" SQ SHANK SLOTTED TIP ST-1026S S/D 6" X 5/16" SQ SHANK SLOTTED TIP ST-1028S S/D 8" X 3/8" SQ SHANK SLOTTED TIP ST-1032S S/D 10" X 3/8" SQ SHANK SLOTTED TIP ST-1140S S/D 1-1/2" X NO. 2PT STUBBY PHILLIPS® TIP ST-1145S S/D 1-1/2" X 1/4" STUBBY SLOTTED TIP PT-1002-1 PLIERS HD SLIP JOINT 6" USA PT-1003-1 PLIERS SLIP JOINT COMB 8" USA PT-1052-1 PLIERS DIAG CUTTING 6" USA PT-1057-1 PLIERS HD DIAG CUTTING 7" USA PT-1107 PLIERS LOCKING 7" STRAIGHT JAW PT-1128-1 PLIERS LONGNOSE SIDECUT 6-1/2" USA PT-1250-1 PLIERS RIBLOCK 10" USA
COMBINATION FULL POLISH WRENCHESBD-24 (Board Only)BD-24-TL (Tools Only)BD-24-A (Board & Tools)
Item No. Description
BW-1156FP WR COMBO POLISH 12PT 1/4"BW-1159FP WR COMBO POLISH 12PT 5/16"BW-1160FP WR COMBO POLISH 12PT 3/8"BW-1161FP WR COMBO POLISH 12PT 7/16"BW-1162FP WR COMBO POLISH 12PT 1/2"BW-1163FP WR COMBO POLISH 12PT 9/16"BW-1164FP WR COMBO POLISH 12PT 5/8"BW-1165FP WR COMBO POLISH 12PT 11/16"BW-1166FP WR COMBO POLISH 12PT 3/4"BW-1167AFP WR COMBO POLISH 12PT 13/16"BW-1167FP WR COMBO POLISH 12PT 7/8"BW-1168FP WR COMBO POLISH 12PT 15/16"BW-1170FP WR COMBO POLISH 12PT 1"BW-1171FP WR COMBO POLISH 12PT 1-1/16"BW-1106MFP WR COMBO POLISH 12PT 6MMBW-1107MFP WR COMBO POLISH 12PT 7MMBW-1108MFP WR COMBO POLISH 12PT 8MMBW-1109MFP WR COMBO POLISH 12PT 9MMBW-1110MFP WR COMBO POLISH 12PT 10MMBW-1111MFP WR COMBO POLISH 12PT 11MMBW-1112MFP WR COMBO POLISH 12PT 12MMBW-1113MFP WR COMBO POLISH 12PT 13MMBW-1114MFP WR COMBO POLISH 12PT 14MMBW-1115MFP WR COMBO POLISH 12PT 15MMBW-1116MFP WR COMBO POLISH 12PT 16MMBW-1117MFP WR COMBO POLISH 12PT 17MMBW-1118MFP WR COMBO POLISH 12PT 18MMBW-1119MFP WR COMBO POLISH 12PT 19MMBW-1120MFP WR COMBO POLISH 12PT 20MMBW-1121MFP WR COMBO POLISH 12PT 21MMBW-1122MFP WR COMBO POLISH 12PT 22MM
Board Size: 24" x 24"
Board Size: 24" x 24"
Tool boards.qxd 6/24/05 1:51 PM Page 194
S C R E W D R I V E R S / P L I E R S , C O M B I N A T I O N F U L L P O L I S H ,S P E C I A L T Y, A D J U S T A B L E W R E N C H E S & P L I E R S ,
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
TO
OL
BO
AR
DS
195Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
SPECIALTY WRENCHESBD-25 (Board Only)BD-25-TL (Tools Only)BD-25-A (Board & Tools)
Item No. Description
FN-1402P WR FLARE NUT 3/8" X 7/16"FN-1404P WR FLARE NUT 1/2" X 9/16"FN-1406P WR FLARE NUT 5/8" X 11/16"FN-1410P WR FLARE NUT 3/4" X 1"FN-1012MP WR FLARE NUT 10MM X 12MMFN-1314MP WR FLARE NUT 13MM X 14MMFN-1517MP WR FLARE NUT 15MM X 17MMFN-1921MP WR FLARE NUT 19MM X 21MMBCF-12 WR CROWFOOT 3/8" DR 3/8"BCF-14 WR CROWFOOT 3/8" DR 7/16"BCF-16 WR CROWFOOT 3/8" DR 1/2"BCF-18 WR CROWFOOT 3/8" DR 9/16"BCF-20 WR CROWFOOT 3/8" DR 5/8"BCF-22 WR CROWFOOT 3/8" DR 11/16"BCF-24 WR CROWFOOT 3/8" DR 3/4"BCF-26 WR CROWFOOT 3/8" DR 13/16"BCF-28 WR CROWFOOT 3/8" DR 7/8"BCF-32 WR CROWFOOT 3/8" DR 1BCF-10M WR CROWFOOT 3/8" DR 10MMBCF-11M WR CROWFOOT 3/8" DR 11MMBCF-12M WR CROWFOOT 3/8" DR 12MMBCF-13M WR CROWFOOT 3/8" DR 13MMBCF-14M WR CROWFOOT 3/8" DR 14MMBCF-15M WR CROWFOOT 3/8" DR 15MMBCF-17M WR CROWFOOT 3/8" DR 17MMBCF-19M WR CROWFOOT 3/8" DR 19MMBCF-21M WR CROWFOOT 3/8" DR 21MMBCF-22M WR CROWFOOT 3/8" DR 22MMZW-1045A-A WR RATCHETING A/C 1/4" X 3/16" SQ 1/2" X 9/16" HEXBW-1410 WR REV RATCHETING BOX 5/16"BW-1412 WR REV RATCHETING BOX 3/8"BW-1414 WR REV RATCHETING BOX 7/16"BW-1416 WR REV RATCHETING BOX 1/2"BW-1418 WR REV RATCHETING BOX 9/16"BW-1420 WR REV RATCHETING BOX 5/8"BW-1422 WR REV RATCHETING BOX 11/16"BW-1424 WR REV RATCHETING BOX 3/4"BW-1458 WR REV RATCHETING BOX 8MMBW-1459 WR REV RATCHETING BOX 9MMBW-1460 WR REV RATCHETING BOX 10MMBW-1461 WR REV RATCHETING BOX 11MMBW-1462 WR REV RATCHETING BOX 12MMBW-1463 WR REV RATCHETING BOX 13MMBW-1464 WR REV RATCHETING BOX 14MMBW-1465 WR REV RATCHETING BOX 15MM
ADJUSTABLE WRENCHES & PLIERSBD-26 (Board Only)BD-26-TL (Tools Only)BD-26-A (Board & Tools)
Item No. Description
AW-1004-1 WRENCH ADJUSTABLE 4"AW-1006-1 WRENCH ADJUSTABLE 6"AW-1008-1 WRENCH ADJUSTABLE 8"AW-1010-1 WRENCH ADJUSTABLE 10"AW-1012-1 WRENCH ADJUSTABLE 12"AW-1015-1 WRENCH ADJUSTABLE 15"PT-3000 SET PLIERS MINI LONG REACH 4 PC PT-1105 PLIERS LOCKING 5" CURVED JAWPT-1106 PLIERS LOCKING 6" LONG NOSEPT-1107 PLIERS LOCKING 7" STRAIGHT JAWPT-1110 PLIERS LOCKING 10" CURVED JAWAW-1351 WRENCH UNIVERSAL CHAIN
Board Size: 24" x 24"
Board Size: 24" x 24"
Tool boards.qxd 6/24/05 1:51 PM Page 195
Visit us at...www.stanleyproto.com196
TO
OL
BO
AR
DS
ADJUSTABLE WRENCHESBD-27 (Board Only)BD-27-TL (Tools Only)BD-27-A (Board & Tools)
Item No. Description
AW-1004-1 WRENCH ADJUSTABLE 4"AW-1006-1 WRENCH ADJUSTABLE 6"AW-1008-1 WRENCH ADJUSTABLE 8"AW-1010-1 WRENCH ADJUSTABLE 10"AW-1012-1 WRENCH ADJUSTABLE 12"AW-1015-1 WRENCH ADJUSTABLE 15"AW-1351 WRENCH UNIVERSAL CHAIN
PUNCHES & CHISELS BD-28 (Board Only)BD-28-TL (Tools Only)BD-28-A (Board & Tools)
Item No. Description
CT-1003 CHISEL COLD 5/16" X 3/8" X 5-1/4"CT-1004 CHISEL COLD 3/8" X 7/16" X 5-1/2"CT-1006 CHISEL COLD 1/2" X 5/8" X 6-1/2"CT-1008 CHISEL COLD 5/8" X 3/4" X 7"CT-1010 CHISEL COLD 3/4" X 7/8" X 7-1/2"CT-1108 CHISEL LONG COLD 5/8" X 3/4" X 12"CT-1110 CHISEL LONG COLD 3/4" X 7/8" X 12"CT-1204 CHISEL ROUND NOSE 3/8" X 1/4" X 5-1/2"CT-1254 CHISEL DIAMOND POINT 3/8" X 3/16" X 5"CT-1303 PUNCH CENTER 3/8 X 5/32" X 5"CT-1304 PUNCH CENTER 7/16" X 3/16" X 5-1/2"CT-1306 PUNCH CENTER 1/2" X 1/4" X 6"CT-1314 PUNCH SCRIBING 3/8" X 5/32" X 5"CT-1404 PUNCH HAND 3/8" X 3/16" X 5"CT-1453 PUNCH PIN 5/16" X 1/8" X 5"CT-1454 PUNCH PIN 5/16" X 5/32" X 5"CT-1456 PUNCH PIN 5/16" X 3/16" X 5"CT-1464 PUNCH PIN 3/8" X 1/4" X 7"CT-1466 PUNCH PIN 1/2" X 5/16" X 7"CT-1509 PUNCH ALIGNING 5/8" X 1/4" X 11"CT-1554 PUNCH TAPER 1/2" X 5/32" X 8 1/2"CT-1556 PUNCH TAPER 1/2" X 3/16" X 9"CT-1558 PUNCH TAPER 5/8" X 5/16" X 11"CT-1606 BAR PINCH 1/2" X 5/8" X 14"CT-1610 BAR PINCH 5/8" X 3/4" X 16"CT-1617 BAR PRY 1/2" X 1-15/16" X 15"CT-1620 BAR PRY 5/8" X 2-5/8" X 18"
Board Size: 12" x 24"
Board Size: 24" x 24"
Tool boards.qxd 6/24/05 1:51 PM Page 196
A D J U S T A B L E W R E N C H E S , P U N C H E S & C H I S E L S ,1 / 4 ” , 3 / 8 ” D R I V E B I T S & T O R X D R I V E R S ,
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
TO
OL
BO
AR
DS
197Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
1/4" & 3/8" DRIVE BITS & TORX DRIVERS BD-29 (Board Only)BD-29-TL (Tools Only)BD-29-A (Board & Tools)
Item No. Description
TS-1209 SKT 1/4" DR INTERNAL TORX® T9TS-1210 SKT 1/4" DR INTERNAL TORX® T10TS-1215 SKT 1/4" DR INTERNAL TORX® T15TS-1220 SKT 1/4" DR INTERNAL TORX® T20TS-1225 SKT 1/4" DR INTERNAL TORX® T25TS-1227 SKT 1/4" DR INTERNAL TORX® T27TS-1230 SKT 1/4" DR INTERNAL TORX® T30TS-2204 SKT 1/4" DR EXTERNAL TORX® E4TS-2205 SKT 1/4" DR EXTERNAL TORX® E5TS-2206 SKT 1/4" DR EXTERNAL TORX® E6TS-2207 SKT 1/4" DR EXTERNAL TORX® E7TS-2208 SKT 1/4" DR EXTERNAL TORX® E8HW-9504 S/D BIT 3/8" DR 3/16" BLADEHW-9505 S/D BIT 3/8" DR 1/4" BLADEHW-9506 S/D BIT 3/8" DR 5/16" BLADEHW-9450 S/D BIT 3/8" DR PHILLIPS® #1HW-9451 S/D BIT 3/8" DR PHILLIPS® #2HW-9452 S/D BIT 3/8" DR PHILLIPS® #3HW-9453 S/D BIT 3/8" DR PHILLIPS® #4HW-9442 SKT BIT 3/8" DR HEX 1/8"HW-9443 SKT BIT 3/8" DR HEX 9/64"HW-9444 SKT BIT 3/8" DR HEX 5/32"HW-9449 SKT BIT 3/8" DR HEX 3/16"HW-9448 SKT BIT 3/8" DR HEX 7/32"HW-9447 SKT BIT 3/8" DR HEX 1/4"HW-9446 SKT BIT 3/8" DR HEX 5/16"HW-9445 SKT BIT 3/8" DR HEX 3/8"HW-9404M SKT BIT 3/8" DR HEX 4MMHW-9405M SKT BIT 3/8" DR HEX 5MMHW-9406M SKT BIT 3/8" DR HEX 6MMHW-9407M SKT BIT 3/8" DR HEX 7MMHW-9408M SKT BIT 3/8" DR HEX 8MMHW-9410M SKT BIT 3/8" DR HEX 10MMTS-1340 SKT 3/8" DR INTERNAL TORX® T40 TS-1345 SKT 3/8" DR INTERNAL TORX® T45 TS-1347 SKT 3/8" DR INTERNAL TORX® T47 TS-1350 SKT 3/8" DR INTERNAL TORX® T50 TS-1355 SKT 3/8" DR INTERNAL TORX® T55 TR-3340 SKT 3/8" DR TAMPER RESISTANT TORX® INTERNAL T10TR-3345 SKT 3/8" DR TAMPER RESISTANT TORX® INTERNAL T15TR-3350 SKT 3/8" DR TAMPER RESISTANT TORX® INTERNAL T20TS-2308 SKT 3/8" DR EXTERNAL TORX® E8TS-2310 SKT 3/8" DR EXTERNAL TORX® E10TS-2312 SKT 3/8" DR EXTERNAL TORX® E12TS-2314 SKT 3/8" DR EXTERNAL TORX® E14TS-1460 SKT 1/2" DR INTERNAL TORX® T60ST-608S S/D TORX® T8 ST-610S S/D TORX® T10 ST-615S S/D TORX® T15 ST-620S S/D TORX® T20 ST-625S S/D TORX® T25 ST-627S S/D TORX® T27
Board Size: 12" x 24"
Tool boards.qxd 6/24/05 1:51 PM Page 197
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.Visit us at...
www.stanleyproto.com198
TO
OL
BO
AR
DS
WRENCHES, PLIERS & SCREWDRIVERS BD-30 (Board Only)BD-30-TL (Tools Only)BD-30-A (Board & Tools)
Item No. Description
BW-1156FP WR COMBO POLISH 12PT 1/4"BW-1159FP WR COMBO POLISH 12PT 5/16"BW-1160FP WR COMBO POLISH 12PT 3/8"BW-1161FP WR COMBO POLISH 12PT 7/16"BW-1162FP WR COMBO POLISH 12PT 1/2"BW-1163FP WR COMBO POLISH 12PT 9/16"BW-1164FP WR COMBO POLISH 12PT 5/8"BW-1165FP WR COMBO POLISH 12PT 11/16"BW-1166FP WR COMBO POLISH 12PT 3/4"BW-1167AFP WR COMBO POLISH 12PT 13/16"BW-1167FP WR COMBO POLISH 12PT 7/8"BW-1168FP WR COMBO POLISH 12PT 15/16"BW-1170FP WR COMBO POLISH 12PT 1"BW-1171FP WR COMBO POLISH 12PT 1-1/16"BW-1106MFP WR COMBO POLISH 12PT 6MMBW-1107MFP WR COMBO POLISH 12PT 7MMBW-1108MFP WR COMBO POLISH 12PT 8MMBW-1109MFP WR COMBO POLISH 12PT 9MMBW-1110MFP WR COMBO POLISH 12PT 10MMBW-1111MFP WR COMBO POLISH 12PT 11MMBW-1112MFP WR COMBO POLISH 12PT 12MMBW-1113MFP WR COMBO POLISH 12PT 13MMBW-1114MFP WR COMBO POLISH 12PT 14MMBW-1115MFP WR COMBO POLISH 12PT 15MMBW-1116MFP WR COMBO POLISH 12PT 16MMBW-1117MFP WR COMBO POLISH 12PT 17MMBW-1118MFP WR COMBO POLISH 12PT 18MMBW-1119MFP WR COMBO POLISH 12PT 19MMBW-1120MFP WR COMBO POLISH 12PT 20MMBW-1121MFP WR COMBO POLISH 12PT 21MMBW-1122MFP WR COMBO POLISH 12PT 22MMFN-1402P WR FLARE NUT 3/8" X 7/16"FN-1404P WR FLARE NUT 1/2" X 9/16"FN-1406P WR FLARE NUT 5/8" X 11/16"FN-1410P WR FLARE NUT 3/4" X 1"FN-1314MP WR FLARE NUT 13MM X 14MMAW-1006-1 WRENCH ADJUSTABLE 6"AW-1008-1 WRENCH ADJUSTABLE 8"AW-1010-1 WRENCH ADJUSTABLE 10"AW-1012-1 WRENCH ADJUSTABLE 12"ZW-1045A-A WR RATCHETING A/C 1/4" X 3/16" SQ 1/2" X 9/16" HEXST-1043S S/D 3" X 3/16" ELEC SLOTTED TIP ST-1046S S/D 6" X 3/16" ELEC SLOTTED TIP ST-1084S S/D 10" X NO. 2PT PHILLIPS® TIP ST-1081S S/D 3" X NO. 1PT PHILLIPS® TIP ST-1082S S/D 4" X NO. 2PT PHILLIPS® TIP ST-1083S S/D 6" X NO. 3PT PHILLIPS® TIP ST-1150S S/D 2" X 1/8" POCKET SLOTTED TIP ST-1008S S/D 8" X 3/8" SLOTTED TIP ST-1024S S/D 4" X 1/4" SQ SHANK SLOTTED TIP ST-1026S S/D 6" X 5/16" SQ SHANK SLOTTED TIP ST-1028S S/D 8" X 3/8" SQ SHANK SLOTTED TIP ST-1032S S/D 10" X 3/8" SQ SHANK SLOTTED TIP ST-1140S S/D 1-1/2" X NO. 2PT STUBBY PHILLIPS® TIP ST-1145S S/D 1-1/2" X 1/4" STUBBY SLOTTED TIPPT-1002-1 PLIERS HD SLIP JOINT 6" USAPT-1003-1 PLIERS SLIP JOINT COMB 8 USAPT-1050 PLIERS WIRE STRIPPER CRIMPER 8"PT-1052-1 PLIERS DIAG CUTTING 6" USAPT-1057-1 PLIERS HD DIAG CUTTING 7" USAPT-1107 PLIERS LOCKING 7" STRAIGHT JAWPT-1110 PLIERS LOCKING 10" CURVED JAWPT-1128-1 PLIERS LONGNOSE SIDECUT 6-1/2"USAPT-1149-1 PLIERS CURVED NEEDLE NOSE 6" USAPT-1250-1 PLIERS RIBLOCK 10" USAPT-1285 PLIERS INT/EXT RETAINING RING 5-3/4"PT-1286 PLIERS COMBO HD INTERNAL RETAING RING 8-1/8"ST-1184 S/D OFFSET 3/16" X 4"341/4 OFFSET SCREWDRIVER PHILLIPS® #1 & #2
Board Size: 24" x 48"
Tool boards.qxd 6/24/05 1:51 PM Page 198
W R E N C H E S , P L I E R S & S C R E W D R I V E R S ,S O C K E T S & A C C E S S O R I E S
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
TO
OL
BO
AR
DS
199Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
SOCKETS & ACCESSORIESBD-31 (Board Only)BD-31-TL (Tools Only)BD-31-A (Board & Tools)
Item No. Description
GW-1605 SKT 1/4" DR 6PT 5/32" GW-1606 SKT 1/4" DR 6PT 3/16" GW-1607 SKT 1/4" DR 6PT 7/32" GW-1608 SKT 1/4" DR 6PT 1/4" GW-1609 SKT 1/4" DR 6PT 9/32" GW-1610 SKT 1/4" DR 6PT 5/16" GW-1611 SKT 1/4" DR 6PT 11/32" GW-1612 SKT 1/4" DR 6PT 3/8" GW-1614 SKT 1/4" DR 6PT 7/16" GW-1616 SKT 1/4" DR 6PT 1/2" GW-1506 SKT 1/4" DR DEEP 6PT 3/16" GW-1507 SKT 1/4" DR DEEP 6PT 7/32 GW-1508 SKT 1/4" DR DEEP 6PT 1/4"GW-1509 SKT 1/4" DR DEEP 6PT 9/32" GW-1510 SKT 1/4" DR DEEP 6PT 5/16" GW-1511 SKT 1/4" DR DEEP 6PT 11/32 GW-1512 SKT 1/4" DR DEEP 6PT 3/8" GW-1514 SKT 1/4" DR DEEP 6PT 7/16" GW-1516 SKT 1/4" DR DEEP 6PT 1/2" TS-1209 SKT 1/4" DR INTERNAL TORX® T9 TS-1210 SKT 1/4" DR INTERNAL TORX® T10 TS-1215 SKT 1/4" DR INTERNAL TORX® T15 TS-1220 SKT 1/4" DR INTERNAL TORX® T20 TS-1225 SKT 1/4" DR INTERNAL TORX® T25 TS-1227 SKT 1/4" DR INTERNAL TORX® T27 TS-1230 SKT 1/4" DR INTERNAL TORX® T30 TS-2204 SKT 1/4" DR EXTERNAL TORX® E4 TS-2205 SKT 1/4" DR EXTERNAL TORX® E5 TS-2206 SKT 1/4" DR EXTERNAL TORX® E6 TS-2207 SKT 1/4" DR EXTERNAL TORX® E7GW-9550 SPINNER HANDLE 1/4" DR 34960 ADAPTER 1/4" DR 1/4" F X 3/8" M GW-9898 EXTENSION 1/4" DR X 3" GW-9899 EXTENSION 1/4" DR X 6" GW-9945B RATCHET 1/4" DR ROUND HEAD GW-9945BR RATCHET RENEWAL KIT 1/4" DR (GW 9945B / GW 9935B) GW-9578 UNIVERSAL JOINT 1/4" DR 30010 SKT 3/8" DR 6PT 5/16" 30612 SKT 3/8" DR 6PT 3/8" 30614 SKT 3/8" DR 6PT 7/16" 30616 SKT 3/8" DR 6PT 1/2" 30618 SKT 3/8" DR 6PT 9/16" 30620 SKT 3/8" DR 6PT 5/8" 30622 SKT 3/8" DR 6PT 11/16" 30624 SKT 3/8" DR 6PT 3/4" 30626 SKT 3/8" DR 6PT 13/16" 30628 SKT 3/8" DR 6PT 7/8" HW-1510 SKT 3/8" DR DEEP 6PT 5/16" HW-1512 SKT 3/8" DR DEEP 6PT 3/8" HW-1514 SKT 3/8" DR DEEP 6PT 7/16" HW-1516 SKT 3/8" DR DEEP 6PT 1/2" HW-1518 SKT 3/8" DR DEEP 6PT 9/16" HW-1520 SKT 3/8" DR DEEP 6PT 5/8" HW-1522 SKT 3/8" DR DEEP 6PT 11/16" HW-1524 SKT 3/8" DR DEEP 6PT 3/4" HW-1526 SKT 3/8" DR DEEP 6PT 13/16" HW-1528 SKT 3/8" DR DEEP 6PT 7/8" 32007M SKT 3/8" DR 6PT 7MM 32008M SKT 3/8" DR 6PT 8MM 32009M SKT 3/8" DR 6PT 9MM 32010M SKT 3/8" DR 6PT 10MM 32011M SKT 3/8" DR 6PT 11MM 32012M SKT 3/8" DR 6PT 12MM 32013M SKT 3/8" DR 6PT 13MM 32014M SKT 3/8" DR 6PT 14MM 32015M SKT 3/8" DR 6PT 15MM 32016M SKT 3/8" DR 6PT 16MM
Item No. Description
32017M SKT 3/8" DR 6PT 17MM 32018M SKT 3/8" DR 6PT 18MM 32019M SKT 3/8" DR 6PT 19MM HW-1510M SKT 3/8" DR DEEP 6PT 10MM HW-1511M SKT 3/8" DR DEEP 6PT 11MM HW-1512M SKT 3/8" DR DEEP 6PT 12MM HW-1513M SKT 3/8" DR DEEP 6PT 13MM HW-1514M SKT 3/8" DR DEEP 6PT 14MM HW-1515M SKT 3/8" DR DEEP 6PT 15MM HW-1517M SKT 3/8" DR DEEP 6PT 17MM HW-1518M SKT 3/8" DR DEEP 6PT 18MM HW-1519M SKT 3/8" DR DEEP 6PT 19MM 31108 SKT 3/8" 8PT 1/4" 31110 SKT 3/8" 8PT 5/16" 31112 SKT 3/8" 8PT 3/8" 31114 SKT 3/8" 8PT 7/16" 31116 SKT 3/8" 8PT 1/2" 30216 SKT 3/8" DR UNIVERSAL 6PT 1/2" 30218 SKT 3/8" DR UNIVERSAL 6PT 9/16" 30220 SKT 3/8" DR UNIVERSAL 6PT 5/8"
Board Size: 24" x 48"
Tool boards.qxd 6/24/05 1:51 PM Page 199
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.Visit us at...
www.stanleyproto.com200
TO
OL
BO
AR
DS
SOCKETS & ACCESSORIES (CONTINUED)BD-31 (Board Only)BD-31-TL (Tools Only)BD-31-A (Board & Tools)
Item No. Description
HW-1520S SKT 3/8" DR SPARK PLUG 5/8" HW-1526S SKT 3/8" DR SPARK PLUG 13/16" HW-9506 S/D BIT 3/8" DR 5/16" BLADE HW-9451 S/D BIT 3/8" DR PHILLIPS® #2 HW-9452 S/D BIT 3/8" DR PHILLIPS® #3 HW-9442 SKT BIT 3/8" DR HEX 1/8" HW-9443 SKT BIT 3/8" DR HEX 9/64" HW-9444 SKT BIT 3/8" DR HEX 5/32" HW-9449 SKT BIT 3/8" DR HEX 3/16" HW-9448 SKT BIT 3/8" DR HEX 7/32" HW-9447 SKT BIT 3/8" DR HEX 1/4" HW-9446 SKT BIT 3/8" DR HEX 5/16" HW-9445 SKT BIT 3/8" DR HEX 3/8" HW-9404M SKT BIT 3/8" DR HEX 4MM HW-9405M SKT BIT 3/8" DR HEX 5MM HW-9406M SKT BIT 3/8" DR HEX 6MM HW-9407M SKT BIT 3/8" DR HEX 7MM HW-9408M SKT BIT 3/8" DR HEX 8MM HW-9410M SKT BIT 3/8" DR HEX 10MM TS-1340 SKT 3/8" DR INTERNAL TORX® T40 TS-1345 SKT 3/8" DR INTERNAL TORX® T45 TS-1347 SKT 3/8" DR INTERNAL TORX® T47 TS-1350 SKT 3/8" DR INTERNAL TORX® T50 TS-1355 SKT 3/8" DR INTERNAL TORX® T55 TS-2308 SKT 3/8" DR EXTERNAL TORX® E8 TS-2310 SKT 3/8" DR EXTERNAL TORX® E10 TS-2312 SKT 3/8" DR EXTERNAL TORX® E12 TS-2314 SKT 3/8" DR EXTERNAL TORX® E14 TS-2316 SKT 3/8" DR EXTERNAL TORX® E1634993 UNIVERSAL JOINT 3/8" DR 34963 ADAPTER 3/8" DR 3/8" F X 1/4" M 34966 ADAPTER 3/8" DR 3/8" F X 1/2" M 34984 EXTENSION 3/8" DR X 11" 34989 EXTENSION 3/8" DR X 1-3/4" 34983 EXTENSION 3/8" DR X 19" 34988 EXTENSION 3/8" DR X 3" 34987 EXTENSION 3/8" DR X 6" 34947B RATCHET 3/8" DR BENT FLEX HANDLE 34948B RATCHET 3/8" DR ROUND HEAD MINI FLEX 34945B RATCHET 3/8" DR ROUND HEAD 34945BR RATCHET RENEWAL KIT 3/8" DR (34945B / 34948B / 34947B) 34935B RATCHET 3/8" DR ROUND HEAD FLEX 34986B FLEX HANDLE 3/8" DR X 10" 40612 SKT 1/2" DR 6PT 3/8" 40614 SKT 1/2" DR 6PT 7/16" 40616 SKT 1/2" DR 6PT 1/2" 40618 SKT 1/2" DR 6PT 9/16" 40620 SKT 1/2" DR 6PT 5/8" 40622 SKT 1/2" DR 6PT 11/16" 40624 SKT 1/2" DR 6PT 3/4" 40626 SKT 1/2" DR 6PT 13/16" 40628 SKT 1/2" DR 6PT 7/8" 40630 SKT 1/2" DR 6PT 15/16" 40632 SKT 1/2" DR 6PT 1"
Item No. Description
40634 SKT 1/2" DR 6PT 1-1/16" 40636 SKT 1/2" DR 6PT 1-1/8" 40416 SKT 1/2" DR DEEP 6PT 1/2" 40418 SKT 1/2" DR DEEP 6PT 9/16" 40420 SKT 1/2" DR DEEP 6PT 5/8" 40422 SKT 1/2" DR DEEP 6PT 11/16" 40424 SKT 1/2" DR DEEP 6PT 3/4" 40426 SKT 1/2" DR DEEP 6PT 13/16" 40428 SKT 1/2" DR DEEP 6PT 7/8" 40430 SKT 1/2" DR DEEP 6PT 15/16" 40432 SKT 1/2" DR DEEP 6PT 1" 40434 SKT 1/2" DR DEEP 6PT 1-1/16" 40436 SKT 1/2" DR DEEP 6PT 1-1/8" 43014M SKT 1/2" DR 12PT 14MM 42015M SKT 1/2" DR 12PT 15MM 42016M SKT 1/2" DR 12PT 16MM 42017M SKT 1/2" DR 12PT 17MM 42018M SKT 1/2" DR 12PT 18MM 42019M SKT 1/2" DR 12PT 19MM 42021M SKT 1/2" DR 12PT 21MM 42022M SKT 1/2" DR 12PT 22MM 42024M SKT 1/2" DR 12PT 24MM 42030M SKT 1/2" DR 12PT 30MM 42032M SKT 1/2" DR 12PT 32MM 42036M SKT 1/2" DR 12PT 36MM 44012M SKT 1/2" DR DEEP 12PT 12MM 44013M SKT 1/2" DR DEEP 12PT 13MM 44014M SKT 1/2" DR DEEP 12PT 14MM 44015M SKT 1/2" DR DEEP 12PT 15MM 44016M SKT 1/2" DR DEEP 12PT 16MM 44017M SKT 1/2" DR DEEP 12PT 17MM 44018M SKT 1/2" DR DEEP 12PT 18MM 44019M SKT 1/2" DR DEEP 12PT 19MM 44021M SKT 1/2" DR DEEP 12PT 21MM 44022M SKT 1/2" DR DEEP 12PT 22MM 44026M SKT 1/2" DR DEEP 12PT 26MM TS-1460 SKT 1/2" DR INTERNAL TORX® T60 TS-2418 SKT 1/2" DR TORX® EXTERNAL E18 40326S SKT 1/2" DR SPARK PLUG 6PT 13/16" 40320S SKT 1/2" DR SPARK PLUG 6PT 5/8" 49978 UNIVERSAL JOINT 1/2" DR 34965 ADAPTER 1/"2 DR 1/2"F X 3/8"M 69992 ADAPTER INCREASING 1/2" DR 1/2" F X 3/4" M 49972 EXTENSION 1/2" DR 19" 49964 EXTENSION 1/2" DR 1-13/16" 49966 EXTENSION 1/2" DR 5" 49990 EXTENSION 1/2" DR 10" 49945B RATCHET 1/2" DR ROUND HEAD 49945BR RATCHET RENEWAL KIT 1/2" DR (49945B) 49988B FLEX HANDLE 1/2" DR X 17" 49946B RATCHET 1/2" DR ROUND HEAD POLISHED Q.R. 49991 ADAPTER REDUCING 3/4" F-1/2"
Tool boards.qxd 6/24/05 1:51 PM Page 200
S O C K E T S & A C C E S S O R I E S ,T O R Q U E , & R A T C H E T I N G W R E N C H E S
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
TO
OL
BO
AR
DS
201Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
TORQUE WRENCHES BD-32 (Board Only)BD-32-TL (Tools Only)BD-32-A (Board & Tools)
Item No. Description
39825-A TORQUE WRENCH 3/8" DR 20-250 FT#34870-A TORQUE WRENCH 3/8" DR 10-100 FT49859-A TORQUE WRENCH 1/2" DR 20-150 FT#49860A TORQUE WRENCH 1/2" DR 25-250 FT#34835 BEAM 3/8 DR 0-800 FT #49830 BEAM 1/2" DR 0-150 FT #
RATCHETING WRENCHES BD-34 (Board Only)BD-34-TL (Tools Only)BD-34-A (Board & Tools)
Item No. Description
BW-1210 WR RATCHETING BOX 3/8"BW-1212 WR RATCHETING BOX 7/16"BW-1214 WR RATCHETING BOX 1/2"BW-1216 WR RATCHETING BOX 9/16"BW-1218 WR RATCHETING BOX 5/8"BW-1220 WR RATCHETING BOX 11/16"BW-1222 WR RATCHETING BOX 3/4"BW-1260 WR RATCHETING BOX 10MMBW-12605 WR RATCHETING BOX 11MMBW-1261 WR RATCHETING BOX 12MMBW-1262 WR RATCHETING BOX 13MMBW-1263 WR RATCHETING BOX 14MMBW-1264 WR RATCHETING BOX 15MMBW-1265 WR RATCHETING BOX 16MMBW-1266 WR RATCHETING BOX 17MMBW-1267 WR RATCHETING BOX 18MMBW-2210 WR RATCHETING STUBBY BOX 3/8" BW-2212 WR RATCHETING STUBBY BOX 7/16" BW-2214 WR RATCHETING STUBBY BOX 1/2" BW-2216 WR RATCHETING STUBBY BOX 9/16" BW-2218 WR RATCHETING STUBBY BOX 5/8" BW-2220 WR RATCHETING STUBBY BOX 11/16"BW-2222 WR RATCHETING STUBBY BOX 3/4" BW-2260 WR RATCHETING STUBBY BOX 10MM BW-2261 WR RATCHETING STUBBY BOX 12MM BW-2262 WR RATCHETING STUBBY BOX 13MM BW-2263 WR RATCHETING STUBBY BOX 14MM BW-2264 WR RATCHETING STUBBY BOX 15MM BW-2265 WR RATCHETING STUBBY BOX 16MM BW-2267 WR RATCHETING STUBBY BOX 18MM BW-1250 SET RATCHETING HIGH ACCESS WR 7 PC SAEBW-1251 SET RATCHETING HIGH ACCESS WR 7 PC METRIC
Board Size: 24" x 24"
Board Size: 24" x 24"
Tool boards.qxd 6/24/05 1:51 PM Page 201
Visit us at...www.stanleyproto.com202
TO
OL
BO
AR
DS
B L A N K B O A R D
BLANK BOARDBD-17
Description
BLANK BOARD WITH 15 PEG HOOKS
Board Size: 24" x 24"
Tool boards.qxd 6/24/05 1:51 PM Page 202
HAND TOOLS.USED BY PROFESSIONALS FOR OVER 160 YEARS.
The Stanley name is synonymous with durability and dependability. Each product is developed to meet the
needs of the end user – making the job easier and faster.
Hand-Tools.qxd 6/24/05 3:09 PM Page 203
Visit us at...www.stanleyproto.com204
HA
ND
TO
OL
S
POWERLOCK® TAPE RULE—1" BLADEREINFORCED WITH BLADE ARMOR™ COATING• Blade Armor™ coating is a patented industrial thermoplastic coating. It’s on the first 6" for
maximum durability and 2x improved blade life. • Over 8' of standout using patented "Selective Cross Curve" technology.• 10% smaller than standard Powerlock® tapes.• Three rivet, corrosion resistant hook, moves to allow for accurate inside/outside measurements.• 1" blade, graduated in 1/16" increment.• Forward blade lock makes it easier to lock and unlock the blade.• Wearplate protects case from being cut.
Blade Length Blade Case Case Stud MarkingsItem No. Meters Feet Width Units Color Material 16" 19.2"
33-525 — 25 1" English Metallic ABS Yes Yes
POWERLOCK® TAPE RULES• 7' standout.• Mylar® polyester film coating extends blade life. • Three rivet, corrosion resistant, moves hook to allow for accurate inside/outside measurements.• Heat treated spring for longer life. • Easy reach blade remains rigid for 7'. • Top forward blade lock design. • Easy to lock and unlock blade.
Blade Length Blade Case Case Stud MarkingsItem No. Meters Feet Width Units Color Material 16" 19.2"
33-430 — 30 1" English Metallic ABS Yes Yes
33-425 — 25 1" English Metallic ABS Yes Yes
33-158 5 16 3/4" English/Metric: cm Metallic ABS No No
33-016 — 16 3/4" English Yellow ABS Yes Yes
33-312 — 12 3/4" English Metallic Zinc Yes Yes
33-012 — 12 3/4" English Yellow ABS Yes Yes
33-328 3 10 3/4" English/Metric: cm Yellow ABS No No
33-215 3.5 12 1/2" English/Metric: mm Metallic ABS No No
33-231 3 10 1/2" English/Metric: cm Metallic Zinc No No
33-218 3 — 1/2" Metric:cm Metallic Zinc No No
33-116 — 16 3/4" English Metallic ABS Yes Yes
33-272 — 12 1/2" English/Decimal Scale Yellow Zinc No No
33-512 — 12 1/2" English Yellow Zinc Yes Yes
33-212 — 12 1/2" English Metallic Zinc Yes Yes
33-202 2 6 1/2" English/Metric: cm Yellow Zinc No No
POWERLOCK® POCKET TAPE RULE—1⁄4" WIDE BLADE WITH DIAMETER SCALE• Diameter scale on back will measure up to 3' diameters. • Mylar® polyester film coating extends blade life.
Blade Length Blade Case Case Stud MarkingsItem No. Meters Feet Width Units Color Material 16" 19.2"
33-115 3 10 1/4" English/Metric Metallic ABS No No
POWERLOCK® KEYTAPE™ RULE—1⁄4" WIDE BLADE• Durable key ring feature.
Blade Length Blade Case Case Stud MarkingsItem No. Meters Feet Width Units Color Material 16" 19.2"
39-130 — 3 1/4" English Metallic ABS No No
First 6" are reinforced with Blade Armor™
coating.
Hand-Tools.qxd 6/24/05 3:09 PM Page 204
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
HA
ND
TO
OL
S
205Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
M E A S U R I N G T O O L S
MAXSTEEL® TAPE RULES• 9' Standout using patented “selective cross curve” technology. (1" blades only).• Heavy and strong spring for extra long life and “smooth-as-silk” blade recoil. • Three rivet, corrosion resistant hook moves to allow for accurate inside/outside measurements
(1" blades only).• Improved blade readability with high contrast color – easy to read in all light conditions. • Top forward blade lock design makes it easier to lock and unlock the blade. • High impact, ABS case with rubber over-mold. • Mylar® polyester film coating extends blade life.
Blade Length Blade Case Case Stud MarkingsItem No. Meters Feet Width Units Color Material 16" 19.2"
33-600 — 30 1" English Yellow ABS Yes Yes
33-599 — 25 1" English Yellow ABS Yes Yes
33-692 — 16 3/4" English Yellow ABS Yes Yes
33-695 5 16 3/4" English/Metric: cm Yellow ABS Yes Yes
33-691 — 12 5/8" English Yellow ABS Yes Yes
33-694 — 12 5/8" English/Fractional Yellow ABS Yes Yes
33-589 3 10 5/8" English/Metric: cm Yellow ABS Yes Yes
LEVERLOCK® TAPE RULES• High visibility yellow color make it easier to find in your toolbox.• Power return tape rule with automatic bottom lock for easy operation.• Special Tru-Zero hook for use as pivot to draw circles and arcs.• Polymer coated blade and heat-treated spring for longer life.• Three rivet corrosion resistant hook.
Blade Length Blade Case Case Stud MarkingsItem No. Meters Feet Width Units Color Material 16" 19.2"
30-825 — 25 1" English Yellow ABS Yes Yes
30-830 — 30 1" English Yellow ABS Yes Yes
30-986 — 16 3/4" English Yellow ABS Yes Yes
30-513 — 12 1/2" English Yellow ABS Yes Yes
STANLEY® TAPE RULES• 7' of standout. • Polymer coated blade for long life. • High impact, high visibility yellow ABS case.
Blade Length Blade Case Case Stud MarkingsItem No. Meters Feet Width Units Color Material 16" 19.2"
30-464 — 30 1" English Yellow ABS Yes Yes
30-455 — 25 1" English Yellow ABS Yes Yes
30-495 — 16 3/4" English Yellow ABS Yes Yes
30-496 5 16 3/4" English/Metric: cm Yellow ABS Yes No
30-485 — 12 1/2" English Yellow ABS Yes Yes
STANLEY® POCKET TAPE RULES—1/4" & 1⁄2" WIDE BLADE• Yellow blade, graduated in 16ths of an inch for length of blade and 32nd of inch for first 12 inches.• Slim compact case.
Blade Length Blade Case Case Stud MarkingsItem No. Meters Feet Width Units Color Material 16" 19.2"
30-061 — 10 1/4" English Black ABS No No
30-506 — 6 1/2" English Black ABS No No
30-825
Mylar® is a registered trademark of DuPont Teijin Films for its polyester film. Only DuPont Teijin Films makes Mylar® polyester film.The shape of the Powerlock® tape rule is a registered trademark of The Stanley Works or its affiliates.
Hand-Tools.qxd 6/24/05 3:09 PM Page 205
Visit us at...www.stanleyproto.com206
HA
ND
TO
OL
S
INSTANT CHANGE™ UTILITY KNIFE• Push button, quick blade change – no tools required. • Strong and durable construction with a cast metal core and bi-material
soft panels for better grip. • Curved handle design for better comfort, control and balance.• Swing out blade storage for easy blade access. • Integrated string cutting feature. • Large hang hole. • Retractable slide. • Furnished with three 11-921 Heavy Duty utility blades.
Item No. Length
10-788 6-1/2"
QUICK CHANGE RETRACTABLE UTILITY KNIFE• Change blades quickly without a screwdriver. • Three position retractable blade slide. • Swing-out blade storage magazine. • Integrated string cutting feature. • Furnished with three 11-921 Heavy Duty utility blades.
Item No. Length
10-499 6"
CLASSIC 99® RETRACTABLE UTILITY KNIFE• Interlocking nose to hold blade.• Multi-position blade slide.• Die-cast metal handle is durable and lightweight.• Furnished with three 11-921 Heavy Duty utility blades.• Blade storage in handle.
Item No. Length
10-099 6"
RETRACTABLE UTILITY KNIVES• Patented Interlocking nose for safety. • Three position retractable blade. • Contoured handle with diagonal ribs for a positive, slip-resistant grip. • Furnished with three 11-921 Heavy Duty utility blades.
Item No. Length
10-079 5-5/8"
Hand-Tools.qxd 6/24/05 3:09 PM Page 206
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
HA
ND
TO
OL
S
207Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
C U T T I N G T O O L S
SAFETY UTILITY KNIFE • Spring-loaded blade retracts into knife automatically when pressure on
slide button is released. • Interlocking nose secures blade safely between knife halves. • Safety-orange color for high visibility. • Furnished with one, 11-987 Round Point utility blade.
Item No. Length
10-189C 5-5/8"
CLASSIC 199® FIXED BLADE UTILITY KNIFE• Positive fixed blade retention for heavy-duty cutting. • Extra heavy duty cast metal textured handle designed for long life and
tough use. • Top and bottom overlap nose. • Accepts most Stanley® utility knife replacement blades, including the
11-931 Extra Heavy Duty blade. • Furnished with three 11-921 Heavy Duty utility blades.
Item No. Length
10-209 5-1/2"
POCKET KNIFE WITH ROTATING BLADE• Epoxy powder coated handle. • Safety blade lock. • Replaceable stainless steel blade. • Blade rotates easily into handle for safe storage.
Item No. Length
10-049 4-1/4"
METAL MITEY-KNIFE® POCKET KNIFE• Rugged metal body. • Blade storage in handle. • Retractable blade with two cutting positions. • Two, 11-031 blades and handy keychain included.
Item No. Length
10-239 3-1/2"
QUICK-POINT™ KNIVES• Retractable knife with Quick-Point™ snap-off blades. • For light duty cutting and trimming. • Blade sections snap-off providing the user with fresh, sharp cutting points. • Removable blade snapper included in cap of knife. • Supplied with one Quick-Point™ blade. • Pocket clip included on 10-150, 9 mm Quick-Point™ snap-off knife.
Item No. Description No. of Cutting Points Length
10-150 9 mm 13 5-1/8"
10-151 18 mm 18 6-1/2"
Hand-Tools.qxd 6/24/05 3:09 PM Page 207
Visit us at...www.stanleyproto.com208
HA
ND
TO
OL
S
9 MM QUICK-POINT™ REPLACEMENT BLADES• Replacement blade with 13 cutting points.
Item No. Packed Fits Stanley Knives Thickness Length
11-300 3/Card 10-150 .017" 3-1/2"
11-300T 10 Pack Dispenser 10-150 .017" 3-1/2"
MITEY-KNIFE® BLADE• High carbon steel blade.
Item No. Packed Fits Stanley Knives Thickness Length
11-031 3/Card 10-039, 10-139, 10-239 .017" 1-1/8"
SHEEPFOOT BLADE• Sheepfoot style blade made of cutlery stainless steel. • For heavy cutting and carving.
Item No. Packed Fits Stanley Knives Thickness Length
11-040 1/Card 10-049 .040" 2-1/2"
UTILITY BLADE• Utility blade made from cutlery stainless steel. • Designed to perform most any cutting job well.
Item No. Packed Fits Stanley Knives Thickness Length
11-041 1/Card 10-049 .040" 2-1/2"
EXTRA HEAVY DUTY UTILITY BLADES• For cutting thick, dense sheet materials. • For use with fixed blade knives only.
Item No. Packed Thickness Length
11-931D 70/Dispenser .035" 2-7/16"
11-931 5/Card .035" 2-7/16"
11-931A 100/Box .035" 2-7/16"
1992® HEAVY DUTY UTILITY BLADES• For general purpose cutting. • Precision-honed edge for consistent and extended cutting life. • Fits most standard utility knives. Stanley Knives:
10-079, 10-099, 10-189C, 10-209, 10-499, 10-788
Item No. Packed Thickness Length
11-921 5/Card .024" 2-7/16"
11-921T 10 Pack. Dispenser .024" 2-7/16"
11-921L 50/Dispenser .024" 2-7/16"
11-921A 100/Dispenser .024" 2-7/16"
11-921B 400/Bulk .024" 2-7/16"
Hand-Tools.qxd 6/24/05 3:09 PM Page 208
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
HA
ND
TO
OL
S
209Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
C U T T I N G T O O L S
11-301T11-301L
18 MM QUICK-POINT™ BLADE• Replacement blade with 8 cutting points. • Fits Stanley® 10-151 snap-off blade knives and most other 18 mm
snap-off blade knives.
Item No. Packed Fits Stanley Knives Thickness Length
11-301 3/Card 10-151 .020" 4-1/4"
11-301T 10 Pack Dispenser 10-151 .020" 4-1/4"
11-301L 50 Pack Dispenser 10-151 .020" 4-1/4"
ROUND POINT UTILITY BLADE• Reduces risk of accidental cuts and reduces damage to interior contents
when cutting open cartons.
Item No. Packed Thickness Length
11-987 5/Card .024" 1-7/8"
11-988 100/Dispenser .024" 1-7/8"
1991® REGULAR DUTY UTILITY BLADE• Regular duty utility blade for light sheet materials, paper and cardboard.
Item No. Packed Thickness Length
11-911 5/Card .017" 2"
11-911A 100/Dispenser .017" 2"
SINGLE EDGE RAZOR BLADE• Steel-backed high carbon steel blade fits all standard razor blade tools. • Replacement blades for Stanley® 28-100 and 28-500 scrapers.
Item No. Packed Thickness Length
11-515 100/Box .009" 1-1/2"
28-510 10/Dispenser .009" 1-1/2"
11-931 11-921 11-987 11-911 11-301 11-300 11-040 11-041 11-031
• • •
• • •
• • • •
• • •
• • •
• • • •
•
•
• •
•
RETRACTABLE 10-079 Interlock® Retractable Utility Regular/Heavy Duty
10-099 Classic 99® Retractable Utility Regular/Heavy Duty
10-189C Safety Knife Self-Retracting Regular/Heavy Duty
10-499 Quick-Change Retractable Utility Regular/Heavy Duty
10-788 Instant Change Retractable Utility Regular/Heavy Duty
FIXED 10-209 Classic 199® Fixed Blade Utility Regular/Heavy Duty
SNAP-OFF 10-150 Quick-Point™ 9 mm Snap-Off Light Duty
10-151 Quick-Point™ 18 mm Snap-Off Light/Regular Duty
POCKET 10-049 Pocket Knife Folding Pocket Sport, Hobby, Craft
10-239 Metal Mitey-Knife® Keychain Pocket Light Duty
KNIFE BLADESBLADE NO. DESCRIPTION THICKNESS
11-931 Extra Heavy Duty Utility Blade 0.035"
11-921 1992® Heavy Duty Utility Blade 0.024"
11-987/11-988 Round Point Utility Blade 0.024"
11-911 1991® Regular Duty Utility Blade 0.017"
11-301 18 mm Quick-Point™ Blade 0.020"
11-300 9 mm Quick-Point™ Blade 0.017"
11-040 Sheepfoot Pocket Knife Blade 0.040"
11-041 Utility Pocket Knife Blade 0.040"
11-031 Mitey-Knife® Blade 0.017"
KNIVESKNIFE NO. PRODUCT NAME KNIFE TYPE APPLICATION
UTILITY BLADES SNAP OFF POCKET KNIFE BLADES BLADES
Hand-Tools.qxd 6/24/05 3:09 PM Page 209
Visit us at...www.stanleyproto.com210
HA
ND
TO
OL
S
JACKETED GRAPHITE HAMMER• Graphite core provides strength and durability.• The “feel” of wood but with overstrike protection.• Rim tempered chamfered edge to help prevent chipping.• High carbon, polished steel head is precision balanced.• Ribbed grip handle allows air to cool hand and channel sweat away.• Patented head-to-handle assembly and smooth handle-to-grip contour
helps prevent hang up on your tool belt.• Flared grip end helps prevent hammer from slipping off hand.
Weight Overall LengthItem No. Description Oz. Grams Inches mm
51-506 Rip Claw 16 450 13-1⁄4" 337
WOOD HANDLE NAIL HAMMER• High carbon steel head fully heat treated with polished bell face.• Hickory handle.
Weight Overall LengthItem No. Description Oz. Grams Inches mm
51-616 Curved Claw 16 450 13-1⁄4" 335
JACKETED GRAPHITE BALL PEIN HAMMERS• Heat-treated, high-carbon steel head for superior strength and durability. • Rim-tempered process around the striking face minimizes chipping
from off-center strikes. • Patented head-to-handle assembly for a permanent fit. • Molded jacket over graphite handle means maximum overstrike protection. • Cushioned grip, molded jacket is designed to absorb shock. • Ergonomically designed grip is contoured for working comfort while the
ribbed channels allows air to ventilate and cool hand, allows moisture to escape. • Flared end provides greater control and helps reduce slippage. • Exceeds ANSI safety specifications.
Weight Overall LengthItem No. Oz. Grams Inches mm
54-716 16 450 13" 345
54-724 24 680 15" 381
54-732 32 910 15" 381
COMPO-CAST® BALL PEIN HAMMERS• Dead blow steel face ball pein hammer heads are tempered alloy steel
with crowned faces for more accuracy — no bounce back.• Steel reinforced handles provide added strength and safety, resists
breaking on overstrike.• Dead blow function uses steel shot.
Weight Face Diameter Head Length Overall LengthItem No. Oz. Inches mm Inches mm Inches mm54-508 8 1" 25 3-5⁄8" 92 10-3⁄4" 27554-516 16 1-1⁄4" 32 4-1⁄8" 105 12-3⁄4" 32554-524 24 1-1⁄2" 38 4-1⁄2" 114 13-1⁄4" 33554-532 32 1-11⁄16" 43 4-3⁄4" 121 14" 355
COMPO-CAST®
HAND DRILLING/ENGINEER’S HAMMER• Dead blow steel face hammer head is tempered alloy steel with
crowned face for more accuracy — no bounce back.• Steel reinforced handle provides added strength and safety, resists
breaking on overstrike.• Dead blow function uses steel shot.
Weight Small Face Diameter Large Face Diameter Head Length Overall LengthItem No. Oz. Inches mm Inches mm Inches mm Inches mm56-532 32 1-9/32" 33 1-11⁄16" 43 4-3⁄4" 121 10-7/16" 265
Hand-Tools.qxd 6/24/05 3:09 PM Page 210
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
HA
ND
TO
OL
S
211Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
S T R I K I N G T O O L S
COMPO-CAST®
STANDARD HEAD SOFT FACE HAMMERS• Non-sparking soft face hammers of Uni-Cast™ construction have no
exposed metal.• Soft face doesn’t mar surfaces or equipment.• Doesn’t absorb liquids.• Dead blow function uses steel shot.• Steel reinforced handles provide added strength and safety, resists
breaking on overstrike.
Weight Face Diameter Head Length Overall LengthItem No. Oz. Inches mm Inches mm Inches mm57-530 10 1.2" 30 3-1⁄8" 79 10-1/8" 25757-531 18 1.6" 40 3-3⁄4" 95 11-1/4" 28657-532 21 1.8" 45 4-1⁄16" 103 12-3⁄4" 32557-533 42 2" 53 4-5/8" 117 14" 35557-534 52 2.5" 63 5-3/8" 136 16" 405
COMPO-CAST®
SLIMLINE HEAD SOFT FACE HAMMERS • Non-sparking soft slimline hammers of Uni-Cast™ construction have no
exposed metal.• Soft face doesn’t mar surfaces.• Doesn’t absorb liquids.• Slimline models offer unique profile, ideal for assembly and repair
applications in confined areas.• Dead blow function uses steel shot.• Steel reinforced handles provide added strength and safety, resists
breaking on overstrike.
Weight Face Diameter Head Length Overall LengthItem No. Oz. Inches mm Inches mm Inches mm57-540 5 1" 25 3" 76 10" 25557-541 14 1-1⁄4" 32 4-1⁄4" 108 10-1⁄2" 26557-542 18 1-1⁄2" 38 4-1⁄4" 108 12" 30557-543 21 1-3⁄4" 45 5-1⁄4" 133 13" 330
COMPO-CAST®
SLEDGE HEAD SOFT FACE HAMMERS • Non-sparking soft face sledge hammers.• Flat area on heads allows upright storage.• Urethane covering helps reduce noise pollution.• Dead blow function uses steel shot.• Steel reinforced handles provide added strength and safety, resists
breaking on overstrike.
Weight Face Diameter Head Length Overall LengthItem No. lbs. Inches mm Inches mm Inches mm57-550 5.0 2.5" 63 7" 178 19-5/8" 49857-551 8.0 2.6" 66 7-1/8" 181 29-7/8" 75957-552 10.5 3.0" 76 8-1/4" 210 30" 76257-554 11.5 3.0" 76 8-1/8" 206 36" 914
SOFT FACE HAMMERS• Tips are made of tough plastic that won’t mar finely finished surfaces.• Handles are made of hickory and securely locked in oval eye body.• Lacquered handle.
Head Weight Handle LengthItem No. Oz. Grams Inches mm57-594 8 230 12" 30557-595 16 450 13-1⁄2" 343
Hand-Tools.qxd 6/24/05 3:09 PM Page 211
Visit us at...www.stanleyproto.com212
HA
ND
TO
OL
S
SHOCK-RESISTANT TORPEDO LEVELS• Aluminum frame with rubber end caps for durability. • Open top read vial. • Rubber end caps for shock absorption. • Pipe groove for use on rounded surfaces.• Water resistant. Magnetic and lighted versions available. • Automatic shut off (43-512 only).
LengthItem No. Description Inches mm No. of Vials
43-510 High Impact Torpedo Level 9" 229 3
43-511 Magnetic High Impact Torpedo Level 9" 229 3
43-512 Lighted High Impact Torpedo Level 9" 229 3
STANDARD FLUTED SCREWDRIVER SETS• Versatile screwdriver set to satisfy most of your fastening needs.• Features popular sizes. • Ergonomically designed handle for comfortable grip. • Alloy steel nickel protected blades for long life. • Hardened tips for slip-resistant fit.
Item No. Contents
60-020 (2 Piece Set) 4" Standard
2 Pt. Phillips®
60-060 (6 Piece Set) 4" and 6" Standard
3" and 6" Cabinet
1 Pt. and 2 Pt. Phillips®
60-100 (10 Piece Set) 4" and 6" Standard
3" and 6" Cabinet
0 Pt., 1 Pt., 2 Pt. Phillips®
2" x 1/8" Standard
Standard Stubby
Stubby Phillips®
6 PC. PRECISION SCREWDRIVER SET• Six precision screwdrivers feature swivel-head handles. • Tough plastic shafts and soft cushion grip allow for greater comfort. • Plastic storage case to index tools.
Item No. Contents
66-052 0 Pt. and 1 Pt. Phillips®
1.4 mm Slotted
2.0 mm Slotted
2.4 mm Slotted
3.0 mm Slotted
6 PC. JEWELERS SCREWDRIVER SET• Six precision screwdrivers feature swivel-head handles. • Bright plated shafts fluted for better grip. • Hardened and tempered steel blades with blued finish to resist corrosion. • Plastic storage case to index tools.
Item No. Contents
66-039 0 pt. and 1 pt. Phillips®
1.4 mm Slotted
1.8 mm Slotted
2.3 mm Slotted
3.0 mm Slotted
60-060
60-100
Phillips® is a registered trademark of Phillips Screw Co.
Hand-Tools.qxd 6/24/05 3:09 PM Page 212
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
HA
ND
TO
OL
S
213Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
L A Y O U T , F A S T E N I N G , S A W S & S N I P S
CUSHION GRIP MULTI-SAW• Ergonomically designed curved handle is cushioned for comfort and prolonged use.• Accepts standard reciprocating blade or hacksaw blade. • Ideal for close quarter sawing. • Large tension nut makes securing the blade quick and easy. • Sold with wood and metal blades.
Blade LengthItem No. Inches mm
20-220 6" 150
METAL MINI-HACK™ UTILITY HACKSAW• Cast aluminum handle is lightweight but built for durability.• Comfortable handle design.• Blade stays in handle to eliminate cutting hazard to hand.• Ideal for tight, hard to reach places.• Complete with a bi-metal blade.
Blade LengthItem No. Inches mm
15-809 10" 254
MINI-HACK™ UTILITY SAW• Ergonomically designed grip with thumb rest for maximum comfort.• Blade stop in handle to eliminate cutting hazard to hand.• Structural design utilizing high impact polymer coating for maximum
strength and durability.• 45%* increase in cutting depth to cut larger work.• Comes with a 10'' carbon steel blade.• For light duty use.
Blade LengthItem No. Inches mm
20-807 10" 254
*Over standard mini hacksaws
MAXSTEEL™ AVIATION SNIPS• Exceeds ANSI standards for cutting performance and durability. • Serrated cutting edges prevent slippage when cutting. • Double overwind spring for longer life. • High leverage, compound cutting design cuts up to 18-Gauge steel. • Slip-resistant bi-material palm cushion grip. • Patented hinge plate for easy product function identification. • One-handed automatic latch release with the squeeze of the handles. • Chrome plated hardware. • Ideal for cutting aluminum, vinyl siding, screening, cardboard, leather and copper.
Item No. Description Overall Length
14-563 Straight 9-21/32"
14-562 Left Curve 9-21/32"
14-564 Right Curve 9-21/32"
14-566 Long Cut Straight 11-27/64"
14-567 Offset Left Curve 9-29/64"
14-568 Offset Right Curve 9-29/64"
14-567
14-564
14-563
14-566
Hand-Tools.qxd 6/24/05 3:09 PM Page 213
Visit us at...www.stanleyproto.com214
HA
ND
TO
OL
S
MAXSTEEL™ ALL-PURPOSE SNIPS STRAIGHT PATTERN • Exceeds ANSI standards for cutting performance and durability. • Serrated cutting edges help prevent slippage when cutting. • Slip-resistant grip.
Cutting Edge LengthItem No. Inches mm
14-569 7" 180
14-556 10" 254
14-558 12" 305
MAXGRIP™ PLIERS• Self adjusting 6" or 8" Pliers. • One hand adjustment up to 1-7/16 ". • Dual material handle for superior gripping. • Ergonomic shape for maximum comfort in most applications. • Handle hole for tethering, hanging or storage. • Meets or exceeds ANSI specifications.• Patented design.
Overall LengthItem No. Inches mm
84-881 6" 152
84-880 8" 203
MAXGRIP™ NEEDLE NOSE PLIERS• Parallel jaw movement for improved holding force. • Larger jaw capacity. • Solid steel jaws for durability and strength. • Bi-material handles ergonomically designed for comfort and ease of use. • Handle hole for tethering, hanging or storage. • Meets or exceeds ANSI specifications.• Patented design.
Overall LengthItem No. Inches mm
84-888 7" 178
84-887 9" 228
SURFORM® PLANE• Resilient enough for use on materials that would dull a traditional bench plane blade. • Manufactured with metallic gray, die-cast alloy body. • Handle made of high impact polymer. • Fitted with replaceable (10"/250 mm) blade.
Overall Length WidthItem No. Inches mm Inches mm
21-296 12-1/2" 315 1-5/8" 41
6"
8"
Hand-Tools.qxd 6/24/05 3:09 PM Page 214
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
HA
ND
TO
OL
S
215Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
S N I P S , P L I E R S & F I N I S H I N G T O O L S
SURFORM® FLAT FILE• Superb tool for use as a rasp on wood, plastic, soft metals and many other materials. • Manufactured with a metallic grey, die-cast alloy body. • Handle made of high impact polymer. • Fitted with a replaceable (10"/250 mm) blade.
Overall Length WidthItem No. Inches mm Inches mm
21-295 17-3/8" 400 1-5/8" 41
SURFORM® ROUND FILE• Especially useful for enlarging holes and smoothing curved surfaces. • Front grip can be removed when used in small holes. • Manufactured with high impact polymer handle and thumb support. • Fitted with a replaceable (10"/250 mm) round blade.
Overall LengthItem No. Inches mm
21-297 15-3/4" 400
SURFORM® POCKET PLANE • One handed tool. • Manufactured with a metallic gray, die-casting alloy body. • Includes thumb screw tension for quick blade replacement.• Fitted with a replaceable (5-1⁄2"/140 mm) fine cut blade.
Overall Length WidthItem No. Inches mm Inches mm
21-399 5-1/2" 140 1-5/8" 41
SURFORM® SHAVER TOOL• Compact and effective lightweight polypropylene molded body. • Curved blade for increased stock removal. • The blade also has side cut teeth for shaving in corners. • Works on the pull stroke. • Simple, click-on blade replacement.
Overall Length WidthItem No. Inches mm Inches mm
21-115 7-1/4" 184 1-5/8" 41
Hand-Tools.qxd 6/24/05 3:09 PM Page 215
Visit us at...www.stanleyproto.com216
HA
ND
TO
OL
S
SURFORM® STANDARD CUT REPLACEMENT BLADE10"/250 mm. All purpose blade – use on wood, vinyl, plaster, thermalite, fiberglass and linoleum. Standard cut blade features teeth flush to the blade edge for working into edges.21-293
SURFORM® FINE CUT REPLACEMENT BLADE10"/250 mm. Designed to produce a fine finish on hard woods, end grains, and soft metals.21-393
SURFORM® FINE CUT REPLACEMENT BLADE5-1⁄2"/140 mm. Fine cut blade for finishing work, end grain, wallboards and soft met-als.21-398
SURFORM® HALF ROUND REPLACEMENT BLADEHalf round convex blade for faster stock removal and shaping curved surfaces. Idealfor work on fiberglass and removing filler (for cars and boats).21-299
SURFORM® ROUND REPLACEMENT BLADE10"/250 mm. Round blade for enlarging holes and smoothing curved surfaces.21-291
SURFORM® SHAVER REPLACEMENT BLADE2-1⁄2"/63 mm. Curved blade for fast stock removal. Works on the pull stroke.21-515
BLADES FOR SURFORM® TOOLS
Item No. Length Fits Tool(s) Shape Type of Cut Applications
21-293 10" (254 mm)) 21-295, 21-296 Flat Standard Cut Hard or soft woods,
21-398 5-1⁄2" (140 mm) 21-399 Flat Fine Cut end grain, plaster, soft
21-393 10" (254 mm) 21-295, 21-296 Flat Fine Cut metals, plastic fillers.
21-299 10" (254 mm) 21-295, 21-296 Half Round Standard Cut Hard or soft woods,
21-291 10" (254 mm) 21-297 Round Round Cut chipboard, plywood,
plaster, plastic fillers.
21-515 2-1⁄2" (64 mm) 21-115 Flat Curved Cut Hard or soft woods,
chipboard, plywood,
plaster, plastic fillers.
Hand-Tools.qxd 6/24/05 3:09 PM Page 216
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
HA
ND
TO
OL
S
217Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
F I N I S H I N G T O O L S
RETRACTABLE RAZOR BLADE SCRAPER• Removes paint, glue, putty or adhesives from glass, tile, walls, floors or other smooth surfaces.
• Blade retracts for safe storage. Uses standard single edge razor blades. • Comes with 5 blades.
Overall LengthItem No. Inches mm
28-500 3-3/4" 95
HIGH VISIBILITY MINI-RAZOR BLADE SCRAPER• Lightweight and economical plastic razor blade scraper. • Blade reverses for safe storage. • Uses standard single edge razor blade. • Great for scraping in hard-to-reach places.
Overall LengthItem No. Inches mm
28-100 1-13/16" 46
SINGLE EDGE RAZOR BLADES• Steel backed high carbon steel blade fits all standard razor blade tools. • Replacement blades for 28-100 and 28-500 scrapers.
Item No. Packed Length Thickness
28-510 10 1-1/2" .009"
WINDOW SCRAPER• Scrapes paint from windows, mirrors, tiles and other flat surfaces.• Uses 11-921 Utility Knife Replacement Blade.
Overall LengthItem No. Inches mm
28-593 7" 178
GLASS AND TILE SCRAPER• 4" wide blade to save time on large jobs. • Used to remove paint and stickers from glass and tile. • Replaceable blade. • Rugged polypropylene construction resists most common paint thinners. • Quick release blade change.
Item No. Blade Length
28-596 4"
4" SCRAPER BLADE
Item No. Blade Length
28-597 4""
Hand-Tools.qxd 6/24/05 3:09 PM Page 217
Visit us at...www.stanleyproto.com218
NU
ME
RIC
AL
IND
EX
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
ProductID No. Description Page #
ProductID No. Description Page #
10-049 Pocket Knife . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207
10-079 Retractable Utility Knife . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206
10-099 Classic 99® Retractable Utility Knife . . . . . . . . . . . . . . . . . .206
10-150 9mm Quick-Point™ Knife . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207
10-151 18mm Quick-Point™ Knife . . . . . . . . . . . . . . . . . . . . . . . . . . . .207
10-189C Self-Retracting Utility Knife . . . . . . . . . . . . . . . . . . . . . . . . . .207
10-209 Fixed Blade Classic 199® Utility Knife . . . . . . . . . . . . . . . . .207
10-239 Metal Mitey-Knife® Pocket Knife W/ Key Chain . . . . . . . .207
10-499 Quick Change Retractable Utility Knife . . . . . . . . . . . . . . . .206
10-788 Instant Change™ Retractable Knife . . . . . . . . . . . . . . . . . . .206
107-A 7 Pc 1/4" 12 Pt Deep Socket Set Sae . . . . . . . . . . . . . . . . . . . .71
107-CNB 7 Pc 1/4" 6 Pt Deep Socket Set Sae . . . . . . . . . . . . . . . . . . . . .71
11-031 Mitey-Knife® Blades For 10-039 / 10-139 / 10-239 (3) . . . .208
11-040 Sheepfoot Blade For 10-049 (1) . . . . . . . . . . . . . . . . . . . . . . .208
11-041 Utility Blade For 10-049 (1) . . . . . . . . . . . . . . . . . . . . . . . . . . .208
110-A 10 Pc 1/4" 12 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . . . .70
110-AM 10 Pc 1/4" 12 Pt Deep Socket Set Metric . . . . . . . . . . . . . . . .71
110-CM 10 Pc 1/4" 6 Pt Deep Socket Set Metric . . . . . . . . . . . . . . . . .71
110-CNB 10 Pc 1/4" 6 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . . . . .70
112-MNB 12 Pc 1/4" 6pt Socket Set Metric . . . . . . . . . . . . . . . . . . . . . . .69
11-300 9mm Quick-Point™ Knife Blades (3) . . . . . . . . . . . . . . . . . . .208
11-300T 9mm Quick-Point™ Knife Blades W/ Dispenser (10) . . . . .208
11-301 18 Mm Quick-Point™ Knife Blades (3) . . . . . . . . . . . . . . . . .209
11-301L 18 Mm Quick-Point™ Knife Blades W/ Dispenser (50) . . .209
11-301T 18 Mm Quick-Point™ Knife Blades W/ Dispenser (10) . . .209
11-515 Single Edge Razor Blades (100) . . . . . . . . . . . . . . . . . . . . . . .209
11-911 T 1991® Utility Blades (5) . . . . . . . . . . . . . . . . . . . . . . . . . . . .209
11-911A T 1991® Utility Blades W/ Dispenser (100) . . . . . . . . . . . . .209
11-921 T 1992® Utility Blades (5) . . . . . . . . . . . . . . . . . . . . . . . . . . . .208
11-921A T 1992® Utility Blades W/ Dispenser (100) . . . . . . . . . . . . .208
11-921B T 1992® Utility Blades – Bulk Pack (400) . . . . . . . . . . . . . . .208
11-921L T 1992® Utility Blades W/ Dispenser (50) . . . . . . . . . . . . . .208
11-921T T 1992® Utility Blades – 10-Pack Dispenser – Carded . . .208
11-931 Extra Heavy Duty Utility Blade - 5/Card . . . . . . . . . . . . . . . .208
11-931A Extra Heavy Duty Utility Blades – Bulk Pack (100) . . . . . .208
11-931D Extra Heavy Duty Utility Blade – 70/Dispenser . . . . . . . . . .208
11-987 Round Point Utility Blades (5) . . . . . . . . . . . . . . . . . . . . . . . .209
11-988 Round Point Utility Blades W/ Dispenser (100) . . . . . . . . . .209
1215 12 Pc 1/2" Dr 12 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . .90
1217-MNB 17 Pc 1/2" Dr 12 Pt Socket Set Metric . . . . . . . . . . . . . . . . . .89
1217-S 17 Pc 1/2" Dr Sae 6 12 Pt Socket Set Sae . . . . . . . . . . . . . . .89
1218-S 17 Pc 1/2" Dr 6 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . .88
1226-NB 26 Pc 1/2" Dr 6 Pt Std Deep Socket Set Sae . . . . . . . . . . . . .88
1226-S 26 Pc 1/2" Dr 6 12 Pt Std Deep Socket Set Sae . . . . . . . . . . .87
1323ANB 23 Pc 1/4" & 3/8" Dr Socket Set Sae . . . . . . . . . . . . . . . . . . . .67
1412-6M 10 Pc 1/4" 12 Pt Socket Set Metric . . . . . . . . . . . . . . . . . . . . .70
1412-MNB 12 Pc 1/4" Dr 6pt Socket Set Metric . . . . . . . . . . . . . . . . . . . . .69
1412NB 12 Pc 1/4" Dr 6 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . .69
1421-MNB 21 Pc 1/4" Dr 6 Pt Socket Set Metric . . . . . . . . . . . . . . . . . . .68
1421NB 21 Pc 1/4" Dr 6 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . .68
1427 27 Pc 1/4" Dr 6 12 Pt Socket Set Sae / Metric . . . . . . . . . . . .67
14-556 Maxsteel™ 10" Straight Pattern Snip . . . . . . . . . . . . . . . . . .214
14-558 Maxsteel™ 12" Straight Pattern Snip . . . . . . . . . . . . . . . . . .214
14-562 Aviation Snip Maxsteel™ - Left . . . . . . . . . . . . . . . . . . . . . .213
14-563 Aviation Snip Maxsteel™ - Straight . . . . . . . . . . . . . . . . . .213
14-564 Aviation Snip Maxsteel™ - Right . . . . . . . . . . . . . . . . . . . . .213
14-566 Aviation Snip Maxsteel™ - Long Cut . . . . . . . . . . . . . . . . .213
14-567 Tin Snip Maxsteel™ - Offset Left . . . . . . . . . . . . . . . . . . . . .213
14-568 Tin Snip Maxsteel™ - Offset Right . . . . . . . . . . . . . . . . . . . .213
14-569 Maxsteel™ 7" Straight Pattern Snip . . . . . . . . . . . . . . . . . . .214
15-809 Metal Mini-Hack ™ Utility Saw . . . . . . . . . . . . . . . . . . . . . . .213
20-220 Cushion Grip Multi-Use Saw . . . . . . . . . . . . . . . . . . . . . . . . .213
202-C 8 Pc 3/8" 12 Pt Deep Socket Set Metric . . . . . . . . . . . . . . . . .83
206-CNB 8 Pc 3/8" 6 Pt Deep Socket Set Metric . . . . . . . . . . . . . . . . . .83
207-M 7 Pc 3/8" 6 Pt Universal Socket Set Metric . . . . . . . . . . . . . .85
20-807 Mini-Hack™ Utility Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213
208-CNB 7 Pc 3/8" 6 Pt Universal Socket Set Sae . . . . . . . . . . . . . . . . .84
208-M 8 Pc 3/8" 6 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . . . . . .82
209-CNB 8 Pc 3/8" 6 Pt Deep Socket Set Sae . . . . . . . . . . . . . . . . . . . . .83
210-B 10 Pc 1/2" 12 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . . . .93
21-115 Surform® shaver – 7-1/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . .215
21-291 Surform® Round Replaceable Blade . . . . . . . . . . . . . . . . . .216
21-293 Surform® Flat Replaceable Blade – Standard Cut . . . . . .216
21-295 Surform® Flat File – Regular Cut Blade . . . . . . . . . . . . . . . .215
21-296 Surform® Plane Type – Regular Cut Blade . . . . . . . . . . . . .215
21-297 Surform® Round File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215
21-299 Surform® Half Round Replaceable Blade – Regular Cut .216
21-393 Surform® Flat Replaceable Blade – Fine Cut . . . . . . . . . . .216
21-398 Surform® Pocket Replaceable Blade – Fine Cut . . . . . . . .216
21-399 Surform® Pocket Plane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215
213-BNB 13 Pc 3/8" 6 Pt Socket Set Metric . . . . . . . . . . . . . . . . . . . . . . .79
21-515 Surform® Shaver Replacement Blade . . . . . . . . . . . . . . . . .216
BlackH-index.qxd 6/27/05 3:41 PM Page 218
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
NU
ME
RIC
AL
IND
EX
219Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
N U M E R I C A L I N D E X
218-BNB 5 Pc 3/8" 8 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . . . . . .83
235-M 5 Pc 3/8" Hex Bit Socket Set Sae . . . . . . . . . . . . . . . . . . . . . . .86
237-B 8 Pc 3/8" Dr Hex Bit Socket Set Metric . . . . . . . . . . . . . . . . .86
237-MB 13 Pc 3/8" Hex Bit Socket Set Sae/Metric . . . . . . . . . . . . . . .86
237-MNB 6 Pc 3/8" Hex Bit Socket Set Metric . . . . . . . . . . . . . . . . . . . .87
238-MB 8 Pc 3/8" Hex Bit Socket Set Sae/Metric . . . . . . . . . . . . . . . .86
28-100 Hi-Visibility Mini-Razor Scraper . . . . . . . . . . . . . . . . . . . . . .217
28-500 Razor Blade Scraper W/ 5 Blades . . . . . . . . . . . . . . . . . . . . .217
28-510 Single Edge Razor Blades W/ Dispenser (10) . . . . . . .209, 217
28-593 7" Window Scraper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217
28-596 4" Glass & Tile Scraper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217
28-597 4" Glass & Tile Blades (5) – Fits 28-596 . . . . . . . . . . . . . . . . .217
30-061 Stanley® Tape Rule 1/4" x 10' . . . . . . . . . . . . . . . . . . . . . . . .205
30-455 Stanley® Tape Rule 1" x 25' . . . . . . . . . . . . . . . . . . . . . . . . . .205
30-464 Stanley® Tape Rule 1" x 30' . . . . . . . . . . . . . . . . . . . . . . . . . .205
30-485 Stanley® Tape Rule 1/2" x 12' . . . . . . . . . . . . . . . . . . . . . . . .205
30-495 Stanley® Tape Rule 3/4" x 16' . . . . . . . . . . . . . . . . . . . . . . . .205
30-496 Stanley® Tape Rule Cm 3/4" X 16'/5m . . . . . . . . . . . . . . . . . .205
30-506 Stanley® utility tape rule - 1/2" x 6' . . . . . . . . . . . . . . . . . . .205
30-513 Leverlock® Tape Rule 3/4" X 12' . . . . . . . . . . . . . . . . . . . . . .205
30-825 Leverlock® Tape Rule 1" x 25' . . . . . . . . . . . . . . . . . . . . . . . .205
30-830 Leverlock® Tape Rule 3/4" x 16' . . . . . . . . . . . . . . . . . . . . . .205
30-986 Leverlock® Tape Rule 1" x 30’ . . . . . . . . . . . . . . . . . . . . . . . .205
30010 Skt 3/8 Dr 6 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30010A Skt 3/8 Dr 12 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30012 Skt 3/8 Dr 12 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30014 Skt 3/8 Dr 12 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30016 Skt 3/8 Dr 12 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30018 Skt 3/8 Dr 12 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30020 Skt 3/8 Dr 12 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30022 Skt 3/8 Dr 12 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30024 Skt 3/8 Dr 12 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30026 Skt 3/8 Dr 12 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30028 Skt 3/8 Dr 12 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
300301 Skt 3/8 Dr 12 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
300321 Skt 3/8 Dr 12 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30209M Skt 3/8 Dr Universal 6 Pt 9mm . . . . . . . . . . . . . . . . . . . . . . . .104
30210M Skt 3/8 Dr Universal 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . .104
30211M Skt 3/8 Dr Universal 6 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . .104
30212 Skt 3/8 Dr Universal 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . .104
30212M Skt 3/8 Dr Universal 6 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . .104
30213M Skt 3/8 Dr Universal 6 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . .104
30214 Skt 3/8 Dr Universal 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . .104
30214M Skt 3/8 Dr Universal 6 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . .104
30215M Skt 3/8 Dr Universal 6 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . .104
30216 Skt 3/8 Dr Universal 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . .104
30218 Skt 3/8 Dr Universal 6 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . .104
30220 Skt 3/8 Dr Universal 6 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . .104
30222 Skt 3/8 Dr Universal 6 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . .104
30224 Skt 3/8 Dr Universal 6 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . .104
30320S Skt 3/8 Dr Universal Spark Plug 5/8 . . . . . . . . . . . . . . . . . . . .104
30326 Skt 3/8 Dr Universal Spark Plug 13/16 . . . . . . . . . . . . . . . . . .104
30412 Skt 3/8 Dr Deep 12 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
30414 Skt 3/8 Dr Deep 12 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
30416 Skt 3/8 Dr Deep 12 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
30418 Skt 3/8 Dr Deep 12 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
30420 Skt 3/8 Dr Deep 12 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
30422 Skt 3/8 Dr Deep 12 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .107
30424 Skt 3/8 Dr Deep 12 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
30426 Skt 3/8 Dr Deep 12 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .107
30428 Skt 3/8 Dr Deep 12 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
30430 Skt 3/8 Dr Deep 12 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .107
30432 Skt 3/8 Dr Deep 12 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
30608 Skt 3/8 Dr 6 Pt 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30612 Skt 3/8 Dr 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30614 Skt 3/8 Dr 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30616 Skt 3/8 Dr 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30618 Skt 3/8 Dr 6 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30620 Skt 3/8 Dr 6 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30622 Skt 3/8 Dr 6 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30624 Skt 3/8 Dr 6 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30626 Skt 3/8 Dr 6 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30628 Skt 3/8 Dr 6 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30630 Skt 3/8 Dr 6 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
30632 Skt 3/8 Dr 6 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
308-M 8 Pc 1/2" 6 Pt Socket Set Metric . . . . . . . . . . . . . . . . . . . . . . . .94
309-BS 9 Pc 1/2" 6 Pt Deep Socket Set Sae . . . . . . . . . . . . . . . . . . . . .94
309-M 10 Pc 1/2" 12 Pt Deep Socket Set Metric . . . . . . . . . . . . . . . .93
310-BNB 11 Pc 1/2" 6 Pt Impact Socket Set Sae . . . . . . . . . . . . . . . . . .91
310-C 10 Pc 1/2" 6 Pt Deep Socket Set Metric . . . . . . . . . . . . . . . . .93
310-MNB 10 Pc 1/2" 12 Pt Socket Set Metric . . . . . . . . . . . . . . . . . . . . . .93
311-BM 11 Pc 1/2" 6 Pt Impact Socket Set Metric . . . . . . . . . . . . . . .92
ProductID No. Description Page #
ProductID No. Description Page #
BlackH-index.qxd 6/27/05 3:41 PM Page 219
Visit us at...www.stanleyproto.com220
NU
ME
RIC
AL
IND
EX
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
311-CNB 11 Pc 1/2" 6 Pt Deep Impact Socket Set Sae . . . . . . . . . . . . .92
311-DM 11 Pc 1/2" 6 Pt Deep Impact Socket Set Metric . . . . . . . . . .92
31108 Skt 3/8 8 Pt 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
31110 Skt 3/8 8 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
31112 Skt 3/8 8 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
31114 Skt 3/8 8 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
31116 Skt 3/8 8 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
3114 Open End Ignition Wr 13/64 X 15/64" . . . . . . . . . . . . . . . . . . .133
3116 Open End Ignition Wr 7/32 X 1/4" . . . . . . . . . . . . . . . . . . . . . .133
3118 Open End Ignition Wr 15/64 X 13/64" . . . . . . . . . . . . . . . . . . .133
3120 Open End Ignition Wr 1/4 X 7/32" . . . . . . . . . . . . . . . . . . . . . .133
3122 Open End Ignition Wr 17/64 X 19/64" . . . . . . . . . . . . . . . . . . .133
3124 Open End Ignition Wr 9/32 X 5/16" . . . . . . . . . . . . . . . . . . . . .133
3128 Open End Ignition Wr 5/16 X 9/32" . . . . . . . . . . . . . . . . . . . . .133
3130 Open End Ignition Wr 11/32 X 3/8" . . . . . . . . . . . . . . . . . . . . .133
3132 Open End Ignition Wr 3/8 X 11/32" . . . . . . . . . . . . . . . . . . . . .133
3134 Open End Ignition Wr 7/16 X 1/2" . . . . . . . . . . . . . . . . . . . . . .133
314-B 11 Pc 1/2" 6 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . . . . .91
314-C 11 Pc 1/2" 12 Pt Deep Socket Set Sae . . . . . . . . . . . . . . . . . . .91
315-M 15 Pc 1/2" 12 Pt Socket Set Metric . . . . . . . . . . . . . . . . . . . . . .90
315-S 15 Pc 1/2" 12 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . . . .90
32007M Skt 3/8 Dr 6 Pt 7mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
32008M Skt 3/8 Dr 6 Pt 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
32009M Skt 3/8 Dr 6 Pt 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
32010M Skt 3/8 Dr 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
32011M Skt 3/8 Dr 6 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
32012M Skt 3/8 Dr 6 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
32013M Skt 3/8 Dr 6 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
32014M Skt 3/8 Dr 6 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
32015M Skt 3/8 Dr 6 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
32016M Skt 3/8 Dr 6 Pt 16mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
32017M Skt 3/8 Dr 6 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
32018M Skt 3/8 Dr 6 Pt 18mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
32019M Skt 3/8 Dr 6 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
32020M Skt 3/8 Dr 6 Pt 20mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
32021M Skt 3/8 Dr 6 Pt 21mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
32022M Skt 3/8 Dr 6 Pt 22mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
33-012 Powerlock® tape rule 3/4" x 12' . . . . . . . . . . . . . . . . . . . . . .204
33-016 Powerlock® tape rule 3/4" x 16' . . . . . . . . . . . . . . . . . . . . . .204
33-115 Powerlock® tape rule 1/4" x 10' w/ dia. Scale . . . . . . . . . .204
33-116 Powerlock® tape rule yellow – 3/4" x 16' . . . . . . . . . . . . . .204
33-158 Powerlock® tape rule – 3/4" x 5m/16' . . . . . . . . . . . . . . . . .204
33-202 Powerlock® Tape Rule 1/2" X 6'/2m Zinc . . . . . . . . . . . . . .204
33-212 Powerlock® tape rule 1/2" x 12' . . . . . . . . . . . . . . . . . . . . . .204
33-231 Powerlock® Tape Rule 1/2" X 10'/3m Zinc . . . . . . . . . . . . .204
33-312 Powerlock® tape rule 3/4" x 12' . . . . . . . . . . . . . . . . . . . . . .204
33-328 Powerlock® tape rule metric cm 3/4" x 3m/10' . . . . . . . . .204
33-430 Powerlock® Tape Rule 1" x 30' . . . . . . . . . . . . . . . . . . . . . . .204
33-512 Powerlock® Tape Rule 1/2" X 12' Zinc . . . . . . . . . . . . . . . . .204
33-525 Powerlock® Tape Rule 1" X 25' W/ Blade Armor . . . . . . . .204
33-589 Maxsteel™ Tape Rule Metric Cm 5/8" X 10'/3m . . . . . . . . .205
33-600 Maxsteel™ Tape Rule 1" x 30' . . . . . . . . . . . . . . . . . . . . . . . .205
33-684 Maxsteel™ Tape Rule fractional 3/4" x 16' . . . . . . . . . . . . .205
33-691 Maxsteel™ Tape Rule 1/2" x 12' . . . . . . . . . . . . . . . . . . . . . . .205
33-692 Maxsteel™ Tape Rule 3/4" x 16' . . . . . . . . . . . . . . . . . . . . . . .205
33-694 Maxsteel™ Tape Rule fractional 5/8" x 12' . . . . . . . . . . . . .205
33-695 Maxsteel™ Tape Rule 3/4" X 16'/5m . . . . . . . . . . . . . . . . . . .205
34007M Skt 3/8 Dr 12 Pt 7mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
34008M Skt 3/8 Dr 12 Pt 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
34009M Skt 3/8 Dr 12 Pt 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
34010M Skt 3/8 Dr 12 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
34011M Skt 3/8 Dr 12 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
34012M Skt 3/8 Dr 12 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
34013M Skt 3/8 Dr 12 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
34014M Skt 3/8 Dr 12 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
34015M Skt 3/8 Dr 12 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
34016M Skt 3/8 Dr 12 Pt 16mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
34017M Skt 3/8 Dr 12 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
34018M Skt 3/8 Dr 12 Pt 18mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
34019M Skt 3/8 Dr 12 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
34020M Skt 3/8 Dr 12 Pt 20mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
34021M Skt 3/8 Dr 12 Pt 21mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
34022M Skt 3/8 Dr 12 Pt 22mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
34835 Torque Wr 3/8 Dr 0 800 Ft# . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
34870-A Torque Wr 3/8 Dr 10 100 Ft# . . . . . . . . . . . . . . . . . . . . . . . . . . .136
34935B Ratchet 3/8 Dr Round Head Flex . . . . . . . . . . . . . . . . . . . . . .102
34945B Ratchet 3/8 Dr Round Head . . . . . . . . . . . . . . . . . . . . . . . . . . .102
34945BR Ratchet Renewal Kit 3/8 Dr . . . . . . . . . . . . . . . . . . . . . . .102-103
34946B Ratchet 3/8 dr round head polished q.r. . . . . . . . . . . . . . . . .102
34946BR Ratchet Renewal Kit 3/8 Dr C95(34946b) . . . . . . . . . . . . . . . .102
34947B Ratchet 3/8 Dr Bent Flex Handle . . . . . . . . . . . . . . . . . . . . . .102
34948B Ratchet 3/8 Dr Round Head Mini Flex . . . . . . . . . . . . . . . . .103
ProductID No. Description Page #
ProductID No. Description Page #
BlackH-index.qxd 6/27/05 3:41 PM Page 220
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
NU
ME
RIC
AL
IND
EX
221Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
N U M E R I C A L I N D E X
34950R Rotator® Ratchet 3/8 Dr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
34950X Ratchet 3/8 Dr Round Head Indexible . . . . . . . . . . . . . . . . .102
34960 Adapter 1/4 Dr 1/4f X 3/8m . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
34963 Adapter 3/8 Dr 3/8f X 1/4m . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
34965 Adapter 1/2 Dr 1/2f X 3/8m . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
34966 Adapter 3/8 Dr 3/8f X 1/2m . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
34982 Speeder Handle 3/8 Dr X 16 . . . . . . . . . . . . . . . . . . . . . . . . . . .103
34983 Extension 3/8 Dr X 19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
34984 Extension 3/8 Dr X 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
34986B Flex Handle 3/8 Dr X 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
34987 Extension 3/8 Dr X 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
34988 Extension 3/8 Dr X 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
34989 Extension 3/8 Dr X 1 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
34993 Universal Joint 3/8 Dr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
3809-6 9 Pc 3/8" 6 Pt Sae Dr Socket Set . . . . . . . . . . . . . . . . . . . . . . .81
3809-B 9 Pc 3/8" 12 Pt Sae Dr Socket Set . . . . . . . . . . . . . . . . . . . . . .82
3809-D6 9 Pc 3/8" 12 Pt Deep Socket Set Sae . . . . . . . . . . . . . . . . . . . .82
3809-DS 9 Pc 3/8" 6 Pt Deep Socket Set Sae . . . . . . . . . . . . . . . . . . . . .82
3810 10 Pc 3/8" 6 Pt Deep Impact Socket Set Metric . . . . . . . . . .81
3810-M 10 Pc 3/8" 6 Pt Impact Socket Set Metric . . . . . . . . . . . . . . . .80
3811-MNB 11 Pc 3/8" Dr 6 Pt Socket Set Metric . . . . . . . . . . . . . . . . . . . .80
3811NB 11 Pc 3/8" Dr 6 12 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . .80
3812-M 12 Pc 3/8" 12 Pt Socket Set Metric . . . . . . . . . . . . . . . . . . . . . .79
3814ANB 14 Pc 3/8" Dr 6 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . .79
3816-MS 16 Pc 3/8" Dr 6 Pt Metric Socket Set Sae/Metric . . . . . . . .78
3818-M 18 Pc 3/8" Dr 6 Pt Socket Set Metric . . . . . . . . . . . . . . . . . . . .78
3819-DS 19 Pc 3/8" Dr 6 Pt Std Deep Socket Set Sae . . . . . . . . . . . . . .77
3820NB 20 Pc 3/8" Dr 6 Pt Std Deep Socket Set Sae . . . . . . . . . . . . . .76
3820-S 20 Pc 3/8" Dr 12 Pt Std Deep Socket Set Sae . . . . . . . . . . . . .77
3824-MNB 24 Pc 3/8" Dr 6 Ptstd Deep Socket Set Metric . . . . . . . . . . . .75
3829-M 29 Pc 3/8" Dr 12 Pt Std Deep Socket Set Metric . . . . . . . . . .74
39-130 Powerlock® key tape 1/4" x 3' . . . . . . . . . . . . . . . . . . . . . . . .204
39825-A Torque Wrench 3/8 Dr 20 250 Ft# . . . . . . . . . . . . . . . . . . . . . .136
40112 Skt 1/2 Dr 12 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40114 Skt 1/2 Dr 12 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40116 Skt 1/2 Dr 12 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40118 Skt 1/2 Dr 12 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40120 Skt 1/2 Dr 12 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40122 Skt 1/2 Dr 12 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40124 Skt 1/2 Dr 12 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40126 Skt 1/2 Dr 12 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40128 Skt 1/2 Dr 12 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40130 Skt 1/2 Dr 12 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40132 Skt 1/2 Dr 12 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40134 Skt 1/2 Dr 12 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40136 Skt 1/2 Dr 12 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40138 Skt 1/2 Dr 12 Pt 1 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40140 Skt 1/2 Dr 12 Pt 1 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40144A Skt 1/2 Dr 12 Pt 1 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
4020P Open End Wr 1/4" X 5/16" . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
40316 Skt 1/2 Dr Deep 12 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
40318 Skt 1/2 Dr Deep 12 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
40320 Skt 1/2 Dr Deep 12 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
40320S Skt 1/2 Dr Spark Plug 6 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . .113
40322 Skt 1/2 Dr Deep 12 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .115
40324 Skt 1/2 Dr Deep 12 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
40326 Skt 1/2 Dr Deep 12 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .115
40326S Skt 1/2 Dr Spark Plug 6 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . .113
40328 Skt 1/2 Dr Deep 12 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
40330 Skt 1/2 Dr Deep 12 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .115
40332 Skt 1/2 Dr Deep 12 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
4033P Open End Wr 15/16" X 1" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
40334 Skt 1/2 Dr Deep 12 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .115
40336 Skt 1/2 Dr Deep 12 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
40416 Skt 1/2 Dr Deep 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40418 Skt 1/2 Dr Deep 6 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40420 Skt 1/2 Dr Deep 6 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40422 Skt 1/2 Dr Deep 6 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40424 Skt 1/2 Dr Deep 6 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40426 Skt 1/2 Dr Deep 6 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40428 Skt 1/2 Dr Deep 6 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40430 Skt 1/2 Dr Deep 6 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40432 Skt 1/2 Dr Deep 6p 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40434 Skt 1/2 Dr Deep 6 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40436 Skt 1/2 Dr Deep 6 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
40612 Skt 1/2 Dr 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
40614 Skt 1/2 Dr 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
40616 Skt 1/2 Dr 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
40618 Skt 1/2 Dr 6 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
40620 Skt 1/2 Dr 6 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
40622 Skt 1/2 Dr 6 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
40624 Skt 1/2 Dr 6 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
ProductID No. Description Page #
ProductID No. Description Page #
BlackH-index.qxd 6/27/05 3:41 PM Page 221
Visit us at...www.stanleyproto.com222
NU
ME
RIC
AL
IND
EX
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
40626 Skt 1/2 Dr 6 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
40628 Skt 1/2 Dr 6 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
40630 Skt 1/2 Dr 6 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
40632 Skt 1/2 Dr 6 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
40634 Skt 1/2 Dr 6 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
40636 Skt 1/2 Dr 6 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
40640 Skt 1/2 Dr 6 Pt 1 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
40642A Skt 1/2 Dr 6 Pt 1 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
411-BNB 11 Pc 3/4" Dr 12 Pt Socket Set Sae W/Metal Case . . . . . . . .95
415-B 15 Pc 3/4" Dr 12 Pt Socket Set Sae W/Metal Case . . . . . . . .95
42010M Skt 1/2 Dr 12 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42011M Skt 1/2 Dr 12 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42012M Skt 1/2 Dr 12 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42013M Skt 1/2 Dr 12 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42014M Skt 1/2 Dr 12 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42015M Skt 1/2 Dr 12 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42016M Skt 1/2 Dr 12 Pt 16mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42017M Skt 1/2 Dr 12 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42018M Skt 1/2 Dr 12 Pt 18mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42019M Skt 1/2 Dr 12 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42020M Skt 1/2 Dr 12 Pt 20mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42021M Skt 1/2 Dr 12 Pt 21mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42022M Skt 1/2 Dr 12 Pt 22mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42023M Skt 1/2 Dr 12 Pt 23mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42024M Skt 1/2 Dr 12 Pt 24mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42025M Skt 1/2 Dr 12 Pt 25mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42026M Skt 1/2 Dr 12 Pt 26mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42027M Skt 1/2 Dr 12 Pt 27mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42028M Skt 1/2 Dr 12 Pt 28mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42030M Skt 1/2 Dr 12 Pt 30mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42032M Skt 1/2 Dr 12 Pt 32mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
42036M Skt 1/2 Dr 12 Pt 36mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
428-BS 28 Pc 3/4" Dr 12 Pt Socket Set Sae W/Metal Case . . . . . . . .94
43-510 High Impact Torpedo Level . . . . . . . . . . . . . . . . . . . . . . . . . . .212
43-511 Magnetic High Impact Torpedo Level . . . . . . . . . . . . . . . . . .212
43-512 Lighted High Impact Torpedo Level . . . . . . . . . . . . . . . . . . . .212
43010M Skt 1/2 Dr 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
43011M Skt 1/2 Dr 6 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
43012M Skt 1/2 Dr 6 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
43013M Skt 1/2 Dr 6 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
43014M Skt 1/2 Dr 6 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
43015M Skt 1/2 Dr 6 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
43017M Skt 1/2 Dr 6 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
43019M Skt 1/2 Dr 6 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
43021M Skt 1/2 Dr 6 Pt 21mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
43022M Skt 1/2 Dr 6 Pt 22mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
43023M Skt 1/2 Dr 6 Pt 23mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
43024M Skt 1/2 Dr 6 Pt 24mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
43027M Skt 1/2 Dr 6 Pt 27mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
44010M Skt 1/2 Dr Deep 12 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115
44011M Skt 1/2 Dr Deep 12 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115
44012M Skt 1/2 Dr Deep 12 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115
44013M Skt 1/2 Dr Deep 12 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115
44014M Skt 1/2 Dr Deep 12 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115
44015M Skt 1/2 Dr Deep 12 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115
44016M Skt 1/2 Dr Deep 12 Pt 16mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115
44017M Skt 1/2 Dr Deep 12 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115
44018M Skt 1/2 Dr Deep 12 Pt 18mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115
44019M Skt 1/2 Dr Deep 12 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115
44020M Skt 1/2 Dr Deep 12 Pt 20mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115
44021M Skt 1/2 Dr Deep 12 Pt 21mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115
44022M Skt 1/2 Dr Deep 12 Pt 22mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115
44023M Skt 1/2 Dr Deep 12 Pt 23mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115
44024M Skt 1/2 Dr Deep 12 Pt 24mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115
44025M Skt 1/2 Dr Deep 12 Pt 25mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115
44026M Skt 1/2 Dr Deep 12 Pt 26mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115
44027M Skt 1/2 Dr Deep 12 Pt 27mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115
45010M Skt 1/2 Dr Deep 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . .115
45011M Skt 1/2 Dr Deep 6 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . .115
45012M Skt 1/2 Dr Deep 6 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . .115
45013M Skt 1/2 Dr Deep 6 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . .115
45014M Skt 1/2 Dr Deep 6 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . .115
45015M Skt 1/2 Dr Deep 6 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . .115
45016M Skt 1/2 Dr Deep 6 Pt 16mm . . . . . . . . . . . . . . . . . . . . . . . . .115
45017M Skt 1/2 Dr Deep 6 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . .115
45018M Skt 1/2 Dr Deep 6 Pt 18mm . . . . . . . . . . . . . . . . . . . . . . . . .115
45019M Skt 1/2 Dr Deep 6 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . .115
45020M Skt 1/2 Dr Deep 6 Pt 20mm . . . . . . . . . . . . . . . . . . . . . . . . .115
45021M Skt 1/2 Dr Deep 6 Pt 21mm . . . . . . . . . . . . . . . . . . . . . . . . .115
45022M Skt 1/2 Dr Deep 6 Pt 22mm . . . . . . . . . . . . . . . . . . . . . . . . .115
45023M Skt 1/2 Dr Deep 6 Pt 23mm . . . . . . . . . . . . . . . . . . . . . . . . .115
45024M Skt 1/2 Dr Deep 6 Pt 24mm . . . . . . . . . . . . . . . . . . . . . . . . .115
ProductID No. Description Page #
ProductID No. Description Page #
BlackH-index.qxd 6/27/05 3:41 PM Page 222
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
NU
ME
RIC
AL
IND
EX
223Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
N U M E R I C A L I N D E X
45025M Skt 1/2 Dr Deep 6 Pt 25mm . . . . . . . . . . . . . . . . . . . . . . . . .115
45026M Skt 1/2 Dr Deep 6 Pt 26mm . . . . . . . . . . . . . . . . . . . . . . . . .115
45027M Skt 1/2 Dr Deep 6 Pt 27mm . . . . . . . . . . . . . . . . . . . . . . . . .115
4723P Open End Wr 3/8" X 7/16" . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
4724P Open End Wr 7/16" X 1/2" . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
4725P Open End Wr 1/2" X 9/16" . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
4727P Open End Wr 5/8" X 11/16" . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
4728P Open End Wr 11/16" X 3/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
4732P Open End Wr13/16" X 7/8" . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
49830 Torque Wr Beam 1/2 Dr 0 150 Ft# . . . . . . . . . . . . . . . . . . . . . .136
49859-A Torque Wrench 1/2 Dr 20 150 Ft# . . . . . . . . . . . . . . . . . . . . . .136
49860A Torque Wrench 1/2 Dr 25 250 Ft# . . . . . . . . . . . . . . . . . . . . . .136
49860ARK Repair Kit for 49860A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
49945B Ratchet 1/2 Dr Round Head . . . . . . . . . . . . . . . . . . . . . . . . . . .112
49945BR Ratchet Renewal Kit 1/2 Dr (49945b) . . . . . . . . . . . . . . . . . . .112
49946B Ratchet 1/2 dr round head polished q.r. . . . . . . . . . . . . . . . .112
49946BR Ratchet Renewal Kit 1/2 Dr (49946b) . . . . . . . . . . . . . . . . . . .112
49964 Extension 1/2 Dr X 1 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
49966 Extension 1/2 Dr X 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
49972 Extension 1/2 Dr X 19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
49976 Universal Joint Impact 1/2 Dr . . . . . . . . . . . . . . . . . . . . . . . . .118
49978 Universal Joint 1/2 Dr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
49979 Socket Draglink 1/2 Dr X 15/16 . . . . . . . . . . . . . . . . . . . . . . . .113
49980 Stud Extractor 1/2 Dr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177
49988B Flex Handle 1/2 Dr X 17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
49990 Extension 1/2 Dr X 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
49991 Adapter 3/4 Dr 3/4f X 1/2m . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
49992 Speeder Handle 1/2 Dr X 18 . . . . . . . . . . . . . . . . . . . . . . . . . . .112
51-506 Rip Jacketed Graphite-Nailer – 16 oz. . . . . . . . . . . . . . . . . .210
51-616 Wood Curved Claw Hammer – 16 oz. . . . . . . . . . . . . . . . . . . .210
54-508 Compo-Cast® Ball Pein Hammer 8 oz., 10-3/4" . . . . . . . . . .210
54-516 Compo-cast® Ball Pein Hammer 16 oz., 12-3/4" . . . . . . . . .210
54-524 Compo-Cast® Ball Pein Hammer 24 oz., 13-1/4" . . . . . . . . .210
54-532 Compo-Cast® Ball Pein Hammer 32 oz., 14" . . . . . . . . . . . .210
54-716 Jacketed Ball Pein Hammer 16 oz. . . . . . . . . . . . . . . . . . . . .210
54-724 Jacketed Ball Pein Hammer 24 oz. . . . . . . . . . . . . . . . . . . . .210
54-732 Jacketed Ball Pein Hammer 32 oz. . . . . . . . . . . . . . . . . . . . .210
56-532 Compo Cast® Drill Hammers – 32 oz 10-1/2" . . . . . . . . . . .210
57-530 Compo-Cast® Mallet – 10 oz., 10" . . . . . . . . . . . . . . . . . . . . .211
57-531 Compo-Cast® Mallet – 18 oz., 11" . . . . . . . . . . . . . . . . . . . . .211
57-532 Compo-Cast® Mallet – 21 oz., 12-3/4" . . . . . . . . . . . . . . . . . .211
57-533 Compo-Cast® Mallet – 42 oz., 14" . . . . . . . . . . . . . . . . . . . . .211
57-534 Compo-Cast® Mallet – 52 oz., 16" . . . . . . . . . . . . . . . . . . . . .211
57-540 Compo-Cast® Slimline Head Soft Face Hammer . . . . . . . .211
57-541 Compo-Cast® Mallet – 14 oz., 10-1/2" . . . . . . . . . . . . . . . . . .211
57-542 Compo-Cast® Mallet – 18 oz., 12" . . . . . . . . . . . . . . . . . . . . .211
57-543 Compo-Cast® Mallet – 21 oz., 13" . . . . . . . . . . . . . . . . . . . . .211
57-550 Compo-Cast® Mallet – 5 lbs., 20" . . . . . . . . . . . . . . . . . . . . .211
57-551 Compo-Cast® Mallet – 8 lbs., 30" . . . . . . . . . . . . . . . . . . . . .211
57-552 Compo-Cast® Mallet – 10.5 lbs., 30" . . . . . . . . . . . . . . . . . . .211
57-554 Compo-Cast® Mallet – 11.5 lbs., 36" . . . . . . . . . . . . . . . . . . .211
57-594 Soft Face Hammer – 8 oz., 12" hndl . . . . . . . . . . . . . . . . . . . .211
57-595 Soft Face Hammer – 16 oz., 13-1/4" hndl . . . . . . . . . . . . . . . .211
60-020 Stanley® 2 pc. Screwdriver set . . . . . . . . . . . . . . . . . . . . . . .212
60-060 Stanley® 6 pc. Screwdriver set . . . . . . . . . . . . . . . . . . . . . . .212
60-100 Stanley® 10 pc. Screwdriver set . . . . . . . . . . . . . . . . . . . . . .212
60026A Skt 3/4 Dr 12 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60027A Skt 3/4 Dr 12 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60028 Skt 3/4 Dr 12 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60030 Skt 3/8 Dr 12 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60032 Skt 3/4 Dr 12 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60034 Skt 3/4 Dr 12 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60036 Skt 3/4 Dr 12 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60038 Skt 3/4 Dr 12 Pt 1 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60040 Skt 3/4 Dr 12 Pt 1 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60042 Skt 3/4 Dr 12 Pt 1 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60044 Skt 3/4 Dr 12 Pt 1 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60046 Skt 3/4 Dr 12 Pt 1 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60048 Skt 3/4 Dr 12 Pt 1 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60050 Skt 3/4 Dr 12 Pt 1 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60052 Skt 3/4 Dr 12 Pt 1 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60054 Skt 3/4 Dr 12 Pt 1 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60056 Skt 3/4 Dr 12 Pt 1 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60058 Skt 3/4 Dr 12 Pt 1 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60060 Skt 3/4 Dr 12 Pt 1 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60064 Skt 3/4 Dr 12 Pt 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60068 Skt 3/4 Dr 12 Pt 2 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60070 Skt 3/4 Dr 12 Pt 2 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60072 Skt 3/4 Dr 12 Pt 2 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
60076 Skt 3/4 Dr 12 Pt 2 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61019M Skt 3/4 Dr 12 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61021M Skt 3/4 Dr 12 Pt 21mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
ProductID No. Description Page #
ProductID No. Description Page #
BlackH-index.qxd 6/27/05 3:41 PM Page 223
Visit us at...www.stanleyproto.com224
NU
ME
RIC
AL
IND
EX
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
61022M Skt 3/4 Dr 12 Pt 22mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61023M Skt 3/4 Dr 12 Pt 23mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61024M Skt 3/4 Dr 12 Pt 24mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61025M Skt 3/4 Dr 12 Pt 25mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61026M Skt 3/4 Dr 12 Pt 26mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61027M Skt 3/4 Dr 12 Pt 27mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61028M Skt 3/4 Dr 12 Pt 28mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61029M Skt 3/4 Dr 12 Pt 29mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61030M Skt 3/4 Dr 12 Pt 30mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61031M Skt 3/4 Dr 12 Pt 31mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61032M Skt 3/4 Dr 12 Pt 32mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61035M Skt 3/4 Dr 12 Pt 35mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61036M Skt 3/4 Dr 12 Pt 36mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61038M Skt 3/4 Dr 12 Pt 38mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61041M Skt 3/4 Dr 12 Pt 41mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61042M Skt 3/4 Dr 12 Pt 42mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61046M Skt 3/4 Dr 12 Pt 46mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61050M Skt 3/4 Dr 12 Pt 50mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61054M Skt 3/4 Dr 12 Pt 54mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
61055M Skt 3/4 Dr 12 Pt 55mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
66-039 Jewelers 6 pc. Precision screwdriver set . . . . . . . . . . . . . .212
66-052 6 Pc. Precision Screwdriver Set . . . . . . . . . . . . . . . . . . . . . .212
69945B Ratchet 3/4 Dr Round Head . . . . . . . . . . . . . . . . . . . . . . . . . . .118
69945BR Ratchet Renewal Kit 3/4 Dr (69945B) . . . . . . . . . . . . . . . . . . .118
69990 Adapter 1 Dr 1f X 3/4m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
69992 Adapter 1/2 Dr 1/2f X 3/4m . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
69993 Extension 3/4 Dr X 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
69994 Extension 3/4 Dr X 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
69995 Extension 3/4 Dr X 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
69997 Sliding Tee Handle 3/4 Dr X 18 . . . . . . . . . . . . . . . . . . . . . . . .118
69998 Flex Handle 3/4 Dr X 19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
84-880 Maxgrip™ 8" Self-Adjusting Pliers . . . . . . . . . . . . . . . . . . . .214
84-881 Maxgrip™ 6" Self-Adjusting Pliers . . . . . . . . . . . . . . . . . . . .214
84-887 Maxgrip™ 9" Needle Nose Pliers . . . . . . . . . . . . . . . . . . . . .214
84-888 Maxgrip™ 7" Needle Nose Pliers . . . . . . . . . . . . . . . . . . . . .214
8921NB 21 Pc 3/8" 6 Pt Std Deep Socket Set Sae . . . . . . . . . . . . . . . .76
8924MNB 24 Pc 3/8" 6 Pt Std Deep Socket Set Metric . . . . . . . . . . . . . .75
900-0 Insert Bit Hex Slotted 7/64 . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-1 Insert Bit Hex Slotted 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-2 Insert Bit Hex Slotted 9/64 . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-20 Insert Bit Hex 0 Pt Phillips . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-21 Insert Bit Hex 1 Phillips . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-22 Insert Bit Hex 2 Phillips . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-23 Insert Bit Hex 3 Phillips . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-3 Insert Bit Hex Slotted 5/32 . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-30 Insert Bit Hex Sq Head #0 . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-31 Insert Bit Hex Sq Head #1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-32 Insert Bit Hex Sq Head #2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-33 Insert Bit Hex Sq Head #3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-4 Insert Bit Hex Slotted 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-40 Insert Bit Hex Reed Prince #0 (Pozi) . . . . . . . . . . . . . . . . . .150
900-41 Insert Bit Hex Reed Prince #1 (Pozi) . . . . . . . . . . . . . . . . . .150
900-42 Insert Bit Hex Reed Prince #2 (Pozi) . . . . . . . . . . . . . . . . . .150
900-43 Insert Bit Hex Reed Prince #3 (Pozi) . . . . . . . . . . . . . . . . . .150
900-5 Insert Bit Hex Slotted 7/32 . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-51 Insert Bit Hex Phillips Arc #1 . . . . . . . . . . . . . . . . . . . . . . . .150
900-52 Insert Bit Hex Phillips Arc #2 . . . . . . . . . . . . . . . . . . . . . . . .150
900-53 Insert Bit Hex Phillips Arc #3 . . . . . . . . . . . . . . . . . . . . . . . .150
900-6 Insert Bit Hex Slotted 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-60 Insert Bit Hex Hex 5/64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-61 Insert Bit Hex 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-62 Insert Bit Hex 5/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-63 Insert Bit Hex 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-64 Insert Bit Hex 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-7 Insert Bit Hex Slotted 9/32 . . . . . . . . . . . . . . . . . . . . . . . . . . .150
900-70 Insert Bit Hex Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
900-8 Insert Bit Hex Slotted 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .150
9000-A Socket Adapter M X M 1/4" Hex X 1/4" Socket . . . . . . . . . .150
9000-T10 Insert Bit Hex Torx T10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
9000-T15 Insert Bit Hex Torx T15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
9000-T20 Insert Bit Hex Torx T20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
9000-T25 Insert Bit Hex Torx T25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
9000-T27 Insert Bit Hex Torx T27 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
9000-T30 Insert Bit Hex Torx T30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
9000-T40 Insert Bit Hex Torx T40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
9000-T6 Insert Bit Hex Torx T6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
9000-T7 Insert Bit Hex Torx T7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
9000-T8 Insert Bit Hex Torx T8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
9000-TP10 Insert Bit Hex Tamper Proof Torx T10 . . . . . . . . . . . . . . . . . .150
9000-TP15 Insert Bit Hex Tamper Proof Torx T15 . . . . . . . . . . . . . . . . . .150
9000-TP20 Insert Bit Hex Tamper Proof Torx T20 . . . . . . . . . . . . . . . . . .150
9000-TP25 Insert Bit Hex Tamper Proof Torx T25 . . . . . . . . . . . . . . . . . .150
ProductID No. Description Page #
ProductID No. Description Page #
BlackH-index.qxd 6/27/05 3:41 PM Page 224
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
NU
ME
RIC
AL
IND
EX
225Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
N U M E R I C A L I N D E X
9000-TP27 Insert Bit Hex Tamper Proof Torx T27 . . . . . . . . . . . . . . . . . .150
90007S Side Cabinet, 7 Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
9000H Hex Bit Holder 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
9023 9 Pc Ratcheting Screwdriver Set . . . . . . . . . . . . . . . . . . . . . .151
9026NB 26 Pc 1/4" Drive Standard/Metric Ratcheting Set . . . . . . . .151
9251NB 50 Pc 1/4" & 3/8" Dr 6 8 Pt Socket Set Sae/Metric . . . . . . . .65
92703I Intermediate Cabinet, 3 Drawers . . . . . . . . . . . . . . . . . . . . . . . .6
92705C Top Chest, 5 Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
92705R Roller Cabinet, 5 Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
92706C Top Chest, 6 Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
92708R Roller Cabinet, 8 Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
9299NB 104 Pc 1/4" & 3/8" Dr 6 12 Pt Socket Set Sae/Metric . . . . . .58
940-JS 40 Pc Insert Bit Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
94106R Roller Cabinet, 6 Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
94107C Top Chest, 7 Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
94109C Top Chest, 9 Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
94113R Roller Cabinet, 13 Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
94114R Roller Cabinet, 14 Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
95410C Top Chest, 10 Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
95414R Roller Cabinet, 14 Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
9609MNB 9 Pc Polish Comb Wr Set Metric . . . . . . . . . . . . . . . . . . . . . .123
9609PNB 9 Pc Polish Comb Wr Set Sae . . . . . . . . . . . . . . . . . . . . . . . .123
94100 Tool Box with Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
97050 1050 Pc Master Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-15
97065 64 Pc 1/4" & 3/8" Dr 6 12 Socket Set Sae/Metric . . . . . . . . . .62
97110 130 Pc 1/4", 3/8", & 1/2" Dr Mech Tool Set . . . . . . . . . . . .52-53
97118 118 Pc 1/4", 3/8", & 1/2" Dr Mech Tool Set . . . . . . . . . . . .54-55
97147 192 Pc Master Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . .44-45
97148 172 Pc Master Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46-47
97205 205 Pc Master Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42-43
97220 220 Pc Master Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-41
97296 296 Pc Master Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-39
97300 300 Pc Master Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34-37
9730-B 30 Pc General Purpose Set . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
9731-B 31 Pc 1/4 & 3/8" Dr 12 Pt Socket Set Sae/Metric . . . . . . . . .66
9750 50 Pc 1/4" & 3/8" Dr 6 8 12 Pt Socket Set Sae/Metric . . . . . .64
9753 53 Pc 1/4" & 3/8" Dr 6 12 Pt Socket Set Sae/Metric . . . . . . .63
9753-B 65 Pc 1/4" & 3/8" Dr 6 12 Pt Socket Set Sae/Metric . . . . . . .60
97584 584 Pc Master Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28-33
97624 624 Pc Master Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-27
9765 65 Pc 1/4" & 3/8" Dr 6 12 Socket Set Sae/Metric . . . . . . . . . .61
9775 75 Pc 1/4" & 3/8" Dr 6 12 Socket Set Sae/Metric . . . . . . . . . .59
9782 82 Pc Master Tool Set W/ Metal Hip Roof Box . . . . . . . . . .48
9782-B 82 Pc 1/4", 3/8" & 1/2" Dr 6 12 Pt Socket Set Sae/Metric . . .57
97835 835 Pc Master Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-21
9796 99 Pc 1/4", 3/8", & 1/2" Dr 6 12 Socket Set Sae/Metric . . . . .56
9913X 13 Pc 6 Pt 3/8" Dr Index Set Sae . . . . . . . . . . . . . . . . . . . . . . . .85
9913XM 13 Pc 6 Pt 3/8" Dr Index Set Metric . . . . . . . . . . . . . . . . . . . . .85
9930X 30 Pc 6 Pt 3/8" Dr 6pt Index Set Sae/Metric . . . . . . . . . . . . . .73
9934 34 Pc 3/8" Dr 12 Pt Std Deep Socket Set Sae/Metric . . . . . .72
AS3 3 Piece Drive Adapter Set . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
AW-1004-1 Wrench Adjustable 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
AW-1006-1 Wrench Adjustable 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
AW-1008-1 Wrench Adjustable 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
AW-1010-1 Wrench Adjustable 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
AW-1012-1 Wrench Adjustable 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
AW-1015-1 Wrench Adjustable 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
AW-1351 Wrench Universal Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
BCF-10M Wr Crowfoot 3/8 Dr 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
BCF-12 Wr Crowfoot 3/8 Dr 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
BCF-12M Wr Crowfoot 3/8 Dr 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
BCF-13M Wr Crowfoot 3/8 Dr 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
BCF-14 Wr Crowfoot 3/8 Dr 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
BCF-14M Wr Crowfoot 3/8 Dr 14mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
BCF-15M Wr Crowfoot 3/8 Dr 15mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
BCF-16 Wr Crowfoot 3/8 Dr 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
BCF-17M Wr Crowfoot 3/8 Dr 17mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
BCF-18 Wr Crowfoot 3/8 Dr 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
BCF-19M Wr Crowfoot 3/8 Dr 19mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
BCF-20 Wr Crowfoot 3/8 Dr 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
BCF-21M Wr Crowfoot 3/8 Dr 21mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
BCF-22 Wr Crowfoot 3/8 Dr 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
BCF-22M Wr Crowfoot 3/8 Dr 22mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
BCF-24 Wr Crowfoot 3/8 Dr 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
BCF-26 Wr Crowfoot 3/8 Dr 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
BCF-28 Wr Crowfoot 3/8 Dr 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
BCF-32 Wr Crowfoot 3/8 Dr 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
BCF-50MNB 10 Pc Crowfoot Wr Sae . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
BCF-50NB 10 Pc Crowfoot Wr Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
BD-1 1/2" & 3/8" Dr Tools (Board Only) . . . . . . . . . . . . . . . . . . . . . .182
BD-1- A 1/2" & 3/8" Dr Tools (Board & Tools) . . . . . . . . . . . . . . . . . . .182
BD-10 3/4" Dr Tools (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .188
ProductID No. Description Page #
ProductID No. Description Page #
BlackH-index.qxd 6/27/05 3:41 PM Page 225
Visit us at...www.stanleyproto.com226
NU
ME
RIC
AL
IND
EX
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
BD-10-A 3/4" Dr Tools (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . . .188
BD-10-TL 3/4" Dr Tools (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188
BD-12 3/8" Dr Impact Tools (Board Only) . . . . . . . . . . . . . . . . . . . . .189
BD-12-A 3/8" Dr Impact Tools (Board & Tools) . . . . . . . . . . . . . . . . .189
BD-12-TL 3/8" Dr Impact Tools (Tools Only) . . . . . . . . . . . . . . . . . . . . . .189
BD-14 1/2" Dr Impact Tools (Board Only) . . . . . . . . . . . . . . . . . . . . .190
BD-14-A 1/2" Dr Impact Tools (Board & Tools) . . . . . . . . . . . . . . . . .190
BD-14-TL 1/2" Dr Impact Tools (Tools Only) . . . . . . . . . . . . . . . . . . . . . .190
BD-15 Pullers (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191
BD-15-A Pullers (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191
BD-15-TL Pullers (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191
BD-16 3/4" Dr Impact Tools (Board Only) . . . . . . . . . . . . . . . . . . . . .191
BD-16-A 3/4" Dr Impact Tools (Board & Tools) . . . . . . . . . . . . . . . . .191
BD-16-TL 3/4" Dr Impact Tools (Tools Only) . . . . . . . . . . . . . . . . . . . . . .191
BD-17 Blank Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202
BD-18 Nut Drivers (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192
BD-18-A Nut Drivers (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . . . .192
BD-18-TL Nut Drivers (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192
BD-1-TL 1/2" & 3/8" Dr Tools (Tools Only) . . . . . . . . . . . . . . . . . . . . . . .182
BD-2 1/2" Drive Tools (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . .183
BD-21 1/4", 3/8", 1/2" Dr Tools (Board Only) . . . . . . . . . . . . . . . . . .193
BD-21-A 1/4", 3/8", 1/2" Dr Tools (Board & Tools) . . . . . . . . . . . . . .193
BD-21-TL 1/4", 3/8", 1/2" Dr Tools (Tools Only) . . . . . . . . . . . . . . . . . . .193
BD-23 Screwdrivers & Pliers (Board Only) . . . . . . . . . . . . . . . . . . .194
BD-23-A Screwdrivers & Pliers (Board & Tools) . . . . . . . . . . . . . . . .194
BD-23-TL Screwdrivers & Pliers (Tools Only) . . . . . . . . . . . . . . . . . . . .194
BD-24 Comb Full Polish Wr (Board Only) . . . . . . . . . . . . . . . . . . . . .194
BD-24-A Comb Full Polish Wr (Board & Tools) . . . . . . . . . . . . . . . . . .194
BD-24-TL Comb Full Polish Wr (Tools Only) . . . . . . . . . . . . . . . . . . . . . .194
BD-25 Specialty Wr (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .195
BD-25-A Specialty Wr (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . .195
BD-25-TL Specialty Wr (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .195
BD-26 Adj Wr & Pliers (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . .195
BD-26-A Adj Wr & Pliers (Board & Tools) . . . . . . . . . . . . . . . . . . . . . .195
BD-26-TL Adj Wr & Pliers (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . .195
BD-27 Adj Wr (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196
BD-27-A Adj Wr (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196
BD-27-TL Adj Wr (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196
BD-28 Punches & Chisels (Board Only) . . . . . . . . . . . . . . . . . . . . . .196
BD-28-A Punches & Chisels (Board & Tools) . . . . . . . . . . . . . . . . . . .196
BD-28-TL Punches & Chisels (Tools Only) . . . . . . . . . . . . . . . . . . . . . .196
BD-29 1/4" & 3/8" Dr Bits & Torx Dr (Board Only) . . . . . . . . . . . . . .197
BD-29-A 1/4" & 3/8" Dr Bits & Torx Dr (Board & Tools) . . . . . . . . . . .197
BD-29-TL 1/4" & 3/8" Dr Bits & Torx Dr (Tools Only) . . . . . . . . . . . . . . .197
BD-2-A 1/2" Drive Tools (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . .183
BD-2-TL 1/2" Drive Tools (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . .183
BD-3 Comb & Flare Nut Wr (Board Only) . . . . . . . . . . . . . . . . . . . .184
BD-30 Wr, Pliers & SD (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . .198
BD-30-A Wr, Pliers & SD (Board & Tools) . . . . . . . . . . . . . . . . . . . . . .198
BD-30-TL Wr, Pliers & SD (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . .198
BD-31 Sockets & Accessories (Board Only) . . . . . . . . . . . . . .199-200
BD-31-A Sockets & Accessories (Board & Tools) . . . . . . . . . . .199-200
BD-31-TL Sockets & Accessories (Tools Only) . . . . . . . . . . . . . . .199-200
BD-32 Torque Wr (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
BD-32-A Torque Wr (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . . . .201
BD-32-TL Torque Wr (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
BD-34 Ratcheting Wr (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . .201
BD-34-A Ratcheting Wr (Board & Tools) . . . . . . . . . . . . . . . . . . . . . .201
BD-34-TL Ratcheting Wr (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . .201
BD-3-A Comb & Flare Nut Wr (Board & Tools) . . . . . . . . . . . . . . . . .184
BD-3-TL Comb & Flare Nut Wr (Tools Only) . . . . . . . . . . . . . . . . . . . .184
BD-4 Open End & Box End Wr (Board Only) . . . . . . . . . . . . . . . . .184
BD-4-A Open End & Box End Wr (Board & Tools) . . . . . . . . . . . . . .184
BD-4-TL Open End & Box End Wr (Tools Only) . . . . . . . . . . . . . . . . . .184
BD-5 Screwdrivers (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . .185
BD-5-A Screwdrivers (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . .185
BD-5-TL Screwdrivers (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .185
BD-6 Pliers (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185
BD-6-A Pliers (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185
BD-6-TL Pliers (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185
BD-7 3/8" Dr Tools (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .186
BD-7-A 3/8" Dr Tools (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . . .186
BD-7-TL 3/8" Dr Tools (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186
BD-8 1/4" Dr Tools (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .187
BD-8-A 1/4" Dr Tools (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . . .187
BD-8-TL 1/4" Dr Tools (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187
BD-9 Hammers (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188
BD-9-A Hammers (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . . . . . .188
BD-9-TL Hammers (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188
BL-006 6 Pc Black Finish Wr Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
BL-006M 6 Pc Black Finish Wr Set Metric . . . . . . . . . . . . . . . . . . . . . .130
BL-009 9 Pc Black Finish Wr Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129
ProductID No. Description Page #
ProductID No. Description Page #
BlackH-index.qxd 6/27/05 3:41 PM Page 226
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
NU
ME
RIC
AL
IND
EX
227Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
N U M E R I C A L I N D E X
BL-009M 9 Pc Black Finish Wr Set Metric . . . . . . . . . . . . . . . . . . . . . .130
BL-014 14 Pc Black Finish Wr Set . . . . . . . . . . . . . . . . . . . . . . . . . . . .129
BL-014M 14 Pc Black Finish Wr Set Metric . . . . . . . . . . . . . . . . . . . . .129
BW-0308RBS 8 Pc Wr Ratchet and Socket Set . . . . . . . . . . . . . . . . . . . . .144
BW-0516R Wr Rev Ratcheting Dbl Box 5/16" X 3/8" . . . . . . . . . . . . . . . .143
BW-0608T Wr Standard Ratcheting Dbl Box E-Torx® E6 X E8 . . . . . .144
BW-0716R Wr Rev Ratcheting Dbl Box 7/16" X 1/2" . . . . . . . . . . . . . . . .143
BW-0809R Wr Rev Ratcheting Dbl Box 8 X 9mm . . . . . . . . . . . . . . . . . .143
BW-0916R Wr Rev Ratcheting Dbl Box 9/16" X 5/8" . . . . . . . . . . . . . . . .143
BW-1011R Wr Rev Ratcheting Dbl Box 10 X 11mm . . . . . . . . . . . . . . . .143
BW-1012T Wr Standard Ratchet Dbl Box E-Torx® E10 X E12 . . . . . . .144
BW-108MNB 8 Pc Open End Wr Set Metric . . . . . . . . . . . . . . . . . . . . . . . . .132
BW-108PNB 8 Pc Open End Wr Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
BW-1106M Wr Combo Satin 6 Pt 6mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1106MB Wr Combo Black Finish 6 Pt 6mm . . . . . . . . . . . . . . . . . . . . .131
BW-1106MFP Wr Combo Satin 6 Pt 6mm . . . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1107M Wr Combo Satin 6 Pt 7mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1107MB Wr Combo Black Finish 6 Pt 7mm . . . . . . . . . . . . . . . . . . . . .131
BW-1107MFP Wr Combo Satin 6 Pt 7mm . . . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1108M Wr Combo Satin 6 Pt 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1108MB Wr Combo Black Finish 6 Pt 8mm . . . . . . . . . . . . . . . . . . . . .131
BW-1108MFP Wr Combo Satin 6 Pt 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1109M Wr Combo Satin 6 Pt 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1109MB Wr Combo Black Finish 6 Pt 9mm . . . . . . . . . . . . . . . . . . . . .131
BW-1109MFP Wr Combo Satin 6 Pt 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1110M Wr Combo Satin 12 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1110MB Wr Combo Black Finish 12 Pt 10mm . . . . . . . . . . . . . . . . . . .131
BW-1110MFP Wr Combo Satin 12 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1111M Wr Combo Satin 12 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1111MB Wr Combo Black Finish 12 Pt 11mm . . . . . . . . . . . . . . . . . . .131
BW-1111MFP Wr Combo Satin 12 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1112M Wr Combo Satin 12 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1112MB Wr Combo Black Finish 12 Pt 12mm . . . . . . . . . . . . . . . . . . .131
BW-1112MFP Wr Combo Satin 12 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1113M Wr Combo Satin 12 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1113MB Wr Combo Black Finish 12 Pt 13mm . . . . . . . . . . . . . . . . . . .131
BW-1113MFP Wr Combo Satin 12 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1114M Wr Combo Satin 12 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1114MB Wr Combo Black Finish 12 Pt 14mm . . . . . . . . . . . . . . . . . . .131
BW-1114MFP Wr Combo Satin 12 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1115M Wr Combo Satin 12 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1115MB Wr Combo Black Finish 12 Pt 15mm . . . . . . . . . . . . . . . . . . .131
BW-1115MFP Wr Combo Satin 12 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1116M Wr Combo Satin 12 Pt 16mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1116MB Wr Combo Black Finish 12 Pt 16mm . . . . . . . . . . . . . . . . . . .131
BW-1116MFP Wr Combo Satin 12 Pt 16mm . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1116R Wr Rev Ratcheting Dbl Box 11/16" X 3/4" . . . . . . . . . . . . . . .143
BW-1117M Wr Combo Satin 12 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1117MB Wr Combo Black Finish 12 Pt 17mm . . . . . . . . . . . . . . . . . . .131
BW-1117MFP Wr Combo Satin 12 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1118M Wr Combo Satin 12 Pt 18mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1118MB Wr Combo Black Finish 12 Pt 18mm . . . . . . . . . . . . . . . . . . .131
BW-1118MFP Wr Combo Satin 12 Pt 18mm . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1119M Wr Combo Satin 12 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1119MB Wr Combo Black Finish 12 Pt 19mm . . . . . . . . . . . . . . . . . . .131
BW-1119MFP Wr Combo Satin 12 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1120M Wr Combo Satin 12 Pt 20mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1120MB Wr Combo Black Finish 12 Pt 20mm . . . . . . . . . . . . . . . . . . .131
BW-1120MFP Wr Combo Satin 12 Pt 20mm . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1121M Wr Combo Satin 12 Pt 21mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1121MB Wr Combo Black Finish 12 Pt 21mm . . . . . . . . . . . . . . . . . . .131
BW-1121MFP Wr Combo Satin 12 Pt 21mm . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1122M Wr Combo Satin 12 Pt 22mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1122MB Wr Combo Black Finish 12 Pt 22mm . . . . . . . . . . . . . . . . . . .131
BW-1122MFP Wr Combo Satin 12 Pt 22mm . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1124M Wr Combo Satin 12 Pt 24mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1124MB Wr Combo Black Finish 12 Pt 24mm . . . . . . . . . . . . . . . . . . .131
BW-1124MFP Wr Combo Satin 12 Pt 24mm . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1125M Wr Combo Satin 12 Pt 25mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1125MB Wr Combo Black Finish 12 Pt 25mm . . . . . . . . . . . . . . . . . . .131
BW-1125MFP Wr Combo Satin 12 Pt 25mm . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1126M Wr Combo Satin 12 Pt 26mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1126MB Wr Combo Black Finish 12 Pt 26mm . . . . . . . . . . . . . . . . . . .131
BW-1126MFP Wr Combo Satin 12 Pt 26mm . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1127M Wr Combo Satin 12 Pt 27mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1127MB Wr Combo Black Finish 12 Pt 27mm . . . . . . . . . . . . . . . . . . .131
BW-1127MFP Wr Combo Satin 12 Pt 27mm . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1128M Wr Combo Satin 12 Pt 28mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1128MB Wr Combo Black Finish 12 Pt 28mm . . . . . . . . . . . . . . . . . . .131
BW-1128MFP Wr Combo Satin 12 Pt 28mm . . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1130M Wr Combo Satin 12 Pt 30mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1130MB Wr Combo Black Finish 12 Pt 30mm . . . . . . . . . . . . . . . . . . .131
ProductID No. Description Page #
ProductID No. Description Page #
BlackH-index.qxd 6/27/05 3:41 PM Page 227
Visit us at...www.stanleyproto.com228
NU
ME
RIC
AL
IND
EX
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
BW-1130MFP Wr Combo Satin 12 Pt 30mm . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1132M Wr Combo Satin 12 Pt 32mm . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1132MB Wr Combo Black Finish 12 Pt 32mm . . . . . . . . . . . . . . . . . . .131
BW-1132MFP Wr Combo Satin 12 Pt 32mm . . . . . . . . . . . . . . . . . . . . . . . .125
BW-1156 Wr Combo Satin 12 Pt 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1156B Wr Combo Black Finish 12 Pt 1/4 . . . . . . . . . . . . . . . . . . . . . .131
BW-1156FP Wr Combo Polish 12 Pt 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1159 Wr Combo Satin 12 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1159B Wr Combo Black Finish 12 Pt 5/16 . . . . . . . . . . . . . . . . . . . . .131
BW-1159FP Wr Combo Polish 12 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1160 Wr Combo Satin 12 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1160B Wr Combo Black Finish 12 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . .131
BW-1160FP Wr Combo Polish 12 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1161 Wr Combo Satin 12 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1161B Wr Combo Black Finish 12 Pt 7/16 . . . . . . . . . . . . . . . . . . . . .131
BW-1161FP Wr Combo Polish 12 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1162 Wr Combo Satin 12 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1162B Wr Combo Black Finish 12 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . .131
BW-1162FP Wr Combo Polish 12 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1163 Wr Combo Satin 12 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1163B Wr Combo Black Finish 12 Pt 9/16 . . . . . . . . . . . . . . . . . . . . .131
BW-1163FP Wr Combo Polish 12 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1164 Wr Combo Satin 12 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1164B Wr Combo Black Finish 12 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . .131
BW-1164FP Wr Combo Polish 12 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1165 Wr Combo Satin 12 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1165B Wr Combo Black Finish 12 Pt 11/16 . . . . . . . . . . . . . . . . . . . .131
BW-1165FP Wr Combo Polish 12 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1166 Wr Combo Satin 12 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1166B Wr Combo Black Finish 12 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . .131
BW-1166FP Wr Combo Polish 12 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1167 Wr Combo Satin 12 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1167A Wr Combo Satin 12 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1167AB Wr Combo Black Finish 12 Pt 13/16 . . . . . . . . . . . . . . . . . . . .131
BW-1167AFP Wr Combo Polish 12 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1167B Wr Combo Black Finish 12 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . .131
BW-1167FP Wr Combo Polish 12 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1168 Wr Combo Satin 12 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1168B Wr Combo Black Finish 12 Pt 15/16 . . . . . . . . . . . . . . . . . . . .131
BW-1168FP Wr Combo Polish 12 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1170 Wr Combo Satin 12 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1170B Wr Combo Black Finish 12 Pt 1 . . . . . . . . . . . . . . . . . . . . . . .131
BW-1170FP Wr Combo Polish 12 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1171 Wr Combo Satin 12 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1171B Wr Combo Black Finish 12 Pt 1 1/16 . . . . . . . . . . . . . . . . . . .131
BW-1171FP Wr Combo Polish 12 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1172 Wr Combo Satin 12 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1172B Wr Combo Black Finish 12 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . .131
BW-1172FP Wr Combo Polish 12 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1173 Wr Combo Satin 12 Pt 1 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1173B Wr Combo Black Finish 12 Pt 1 1/4 . . . . . . . . . . . . . . . . . . . .131
BW-1173FP Wr Combo Polish 12 Pt 1 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1174 Wr Combo Satin 12 Pt 1 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1174FP Wr Combo Polish 12 Pt 1 5/16 . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1175 Wr Combo Satin 12 Pt 1 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1175B Wr Combo Black Finish 12 Pt 1 3/8 . . . . . . . . . . . . . . . . . . . .131
BW-1175FP Wr Combo Polish 12 Pt 1 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1176 Wr Combo Satin 12 Pt 1 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1176B Wr Combo Black Finish 12 Pt 1 7/16 . . . . . . . . . . . . . . . . . . .131
BW-1176FP Wr Combo Polish 12 Pt 1 7/16 . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-1177 Wr Combo Satin 12 Pt 1 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . .128
BW-1177B Wr Combo Black Finish 12 Pt 1 1/2 . . . . . . . . . . . . . . . . . . . .131
BW-1177FP Wr Combo Polish 12 Pt 1 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . .124
BW-11P 11 Pc Polish Comb Wr Set Sae / Metric . . . . . . . . . . . . . . .123
BW-11PT 11 Pc Polish Comb Wr Set Sae . . . . . . . . . . . . . . . . . . . . . . .123
BW-1210 Wr Ratcheting Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-1212 Wr Ratcheting Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-1213R Wr Rev Ratcheting Dbl Box 12 X 13mm . . . . . . . . . . . . . . . .143
BW-1214 Wr Ratcheting Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-1216 Wr Ratcheting Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-1218 Wr Ratcheting Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-1220 Wr Ratcheting Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-1222 Wr Ratcheting Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-1250 7 Pc Wr Ratcheting Box Set . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-1251 7 Pc Wr Ratcheting Box Set-Metric . . . . . . . . . . . . . . . . . . .138
BW-1258 Wr Ratcheting Box 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-1259 Wr Ratcheting Box 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-1260 Wr Ratcheting Box 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-12605 Wr Ratcheting Box 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-1261 Wr Ratcheting Box 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-1262 Wr Ratcheting Box 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-1263 Wr Ratcheting Box 14mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
ProductID No. Description Page #
ProductID No. Description Page #
BlackH-index.qxd 6/27/05 3:41 PM Page 228
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
NU
ME
RIC
AL
IND
EX
229Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
N U M E R I C A L I N D E X
BW-1264 Wr Ratcheting Box 15mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-1265 Wr Ratcheting Box 16mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-1266 Wr Ratcheting Box 17mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-1267 Wr Ratcheting Box 18mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-1268 Wr Ratcheting Box 19mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
BW-1300T 4 Pc Wr Standard Ratchet Dbl Box E-Torx® Set . . . . . . . .144
BW-1400 8 Pc Reverse Gear Wr Set Sae . . . . . . . . . . . . . . . . . . . . . . . .139
BW-1401 7 Pc Wr Jumbo Rev Ratcheting Box Set . . . . . . . . . . . . . . . .140
BW-1403 Wr Rev Ratcheting Box 7/32 . . . . . . . . . . . . . . . . . . . . . . . . . .139
BW-1405 Wr Rev Ratcheting Box 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . .139
BW-1408 8 Pc Reverse Gear Wr Set Metric . . . . . . . . . . . . . . . . . . . . .139
BW-1410 Wr Rev Ratcheting Box 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . .139
BW-1412 Wr Rev Ratcheting Box 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . .139
BW-1414 Wr Rev Ratcheting Box 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . .139
BW-1415R Wr Rev Ratcheting Dbl Box 14 X 15mm . . . . . . . . . . . . . . . .143
BW-1416 Wr Rev Ratcheting Box 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . .139
BW-1418 Wr Rev Ratcheting Box 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . .139
BW-1418T Wr Standard Ratchet Dbl Box E-Torx® E14 X E18 . . . . . . .144
BW-1420 Wr Rev Ratcheting Box 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . .139
BW-1422 Wr Rev Ratcheting Box 11/16 . . . . . . . . . . . . . . . . . . . . . . . . .139
BW-1424 Wr Rev Ratcheting Box 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . .139
BW-1426 Wr Jumbo Rev Ratcheting Box . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1428 Wr Jumbo Rev Ratcheting Box . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1430 Wr Jumbo Rev Ratcheting Box . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1432 Wr Jumbo Rev Ratcheting Box . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1434 Wr Jumbo Rev Ratcheting Box . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1436 Wr Jumbo Rev Ratcheting Box . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1438 Wr Jumbo Rev Ratcheting Box . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1450 Set Reverse Gear Wr 12pc Metric . . . . . . . . . . . . . . . . . . . . .139
BW-1451 7 Pc Wr Jumbo Rev Ratcheting Box Set-Metric . . . . . . . . .140
BW-1458 Wr Rev Ratcheting Box 8mm . . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1459 Wr Rev Ratcheting Box 9mm . . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1460 Wr Rev Ratcheting Box 10mm . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1461 Wr Rev Ratcheting Box 11mm . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1462 Wr Rev Ratcheting Box 12mm . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1463 Wr Rev Ratcheting Box 13mm . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1464 Wr Rev Ratcheting Box 14mm . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1465 Wr Rev Ratcheting Box 15mm . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1466 Wr Rev Ratcheting Box 16mm . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1467 Wr Rev Ratcheting Box 17mm . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1468 Wr Rev Ratcheting Box 18mm . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1469 Wr Rev Ratcheting Box 19mm . . . . . . . . . . . . . . . . . . . . . . . .140
BW-1471 Wr Jumbo Rev Ratcheting Box 21mm . . . . . . . . . . . . . . . . . .140
BW-1472 Wr Jumbo Rev Ratcheting Box 22mm . . . . . . . . . . . . . . . . . .140
BW-1474 Wr Jumbo Rev Ratcheting Box 24mm . . . . . . . . . . . . . . . . . .140
BW-1477 Wr Jumbo Rev Ratcheting Box 27mm . . . . . . . . . . . . . . . . . .140
BW-1480 Wr Jumbo Rev Ratcheting Box 30mm . . . . . . . . . . . . . . . . . .140
BW-1482 Wr Jumbo Rev Ratcheting Box 32mm . . . . . . . . . . . . . . . . . .140
BW-1484 Wr Jumbo Rev Ratcheting Box 34mm . . . . . . . . . . . . . . . . . .140
BW-14MPT 14 Pc Polish Comb Wr Set Sae / Metric . . . . . . . . . . . . . . .123
BW-14PT 14 Pc Polish Comb Wr Set Sae . . . . . . . . . . . . . . . . . . . . . . .122
BW-1618R Wr Rev Ratcheting Dbl Box 16 X 18mm . . . . . . . . . . . . . . . .143
BW-1719R Wr Rev Ratcheting Dbl Box 17 X 19mm . . . . . . . . . . . . . . . .143
BW-2024T Wr Standard Ratchet Dbl Box E-Torx® E20 X E24 . . . . . . .144
BW-2206R Wr Ratcheting Stubby Box 1/4 . . . . . . . . . . . . . . . . . . . . . . . .141
BW-2208R Wr Ratcheting Stubby Box 5/16 . . . . . . . . . . . . . . . . . . . . . . .141
BW-2210R Wr Ratcheting Stubby Box 3/8 . . . . . . . . . . . . . . . . . . . . . . . .141
BW-2212R Wr Ratcheting Stubby Box 7/16 . . . . . . . . . . . . . . . . . . . . . . .141
BW-2214R Wr Ratcheting Stubby Box 1/2 . . . . . . . . . . . . . . . . . . . . . . . .141
BW-2216R Wr Ratcheting Stubby Box 9/16 . . . . . . . . . . . . . . . . . . . . . . .141
BW-2218R Wr Ratcheting Stubby Box 5/8 . . . . . . . . . . . . . . . . . . . . . . .141
BW-2220R Wr Ratcheting Stubby Box 11/16 . . . . . . . . . . . . . . . . . . . . . .141
BW-2222R Wr Ratcheting Stubby Box 3/4 . . . . . . . . . . . . . . . . . . . . . . . .141
BW-2250R 9 Pc Ratcheting Stubby Wr Set Sae . . . . . . . . . . . . . . . . . . .141
BW-2251R 13 Pc Ratcheting Stubby Wr Set Metric . . . . . . . . . . . . . . .141
BW-2260R Wr Ratcheting Stubby Box 10mm . . . . . . . . . . . . . . . . . . . . .141
BW-2261R Wr Ratcheting Stubby Box 11mm . . . . . . . . . . . . . . . . . . . . .141
BW-2262R Wr Ratcheting Stubby Box 12mm . . . . . . . . . . . . . . . . . . . . .141
BW-2263R Wr Ratcheting Stubby Box 13mm . . . . . . . . . . . . . . . . . . . . .141
BW-2264R Wr Ratcheting Stubby Box 14mm . . . . . . . . . . . . . . . . . . . . .141
BW-2265R Wr Ratcheting Stubby Box 15mm . . . . . . . . . . . . . . . . . . . . .141
BW-2266R Wr Ratcheting Stubby Box 16mm . . . . . . . . . . . . . . . . . . . . .141
BW-2267R Wr Ratcheting Stubby Box 17mm . . . . . . . . . . . . . . . . . . . . .141
BW-2268R Wr Ratcheting Stubby Box 18mm . . . . . . . . . . . . . . . . . . . . .141
BW-2269R Wr Ratcheting Stubby Box 19mm . . . . . . . . . . . . . . . . . . . . .141
BW-2276R Wr Ratcheting Stubby Box 6mm . . . . . . . . . . . . . . . . . . . . . .141
BW-2278R Wr Ratcheting Stubby Box 8mm . . . . . . . . . . . . . . . . . . . . . .141
BW-2279R Wr Ratcheting Stubby Box 9mm . . . . . . . . . . . . . . . . . . . . . .141
BW-3209L Wr Flex Ratcheting Box 5/16" . . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3210L Wr Flex Ratcheting Box 3/8" . . . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3212L Wr Flex Ratcheting Box 7/16" . . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3214L Wr Flex Ratcheting Box 1/2" . . . . . . . . . . . . . . . . . . . . . . . . . .142
ProductID No. Description Page #
ProductID No. Description Page #
BlackH-index.qxd 6/27/05 3:41 PM Page 229
Visit us at...www.stanleyproto.com230
NU
ME
RIC
AL
IND
EX
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
BW-3216L Wr Flex Ratcheting Box 9/16" . . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3218L Wr Flex Ratcheting Box 5/8" . . . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3220L Wr Flex Ratcheting Box 11/16" . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3222L Wr Flex Ratcheting Box 3/4" . . . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3250L 12 Pc Wr Flex Ratcheting Box Set-Metric . . . . . . . . . . . . . .142
BW-3251L 8 Pc Wr Flex Ratcheting Box Set Sae . . . . . . . . . . . . . . . . . .142
BW-3258L Wr Flex Ratcheting Box 8mm . . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3259L Wr Flex Ratcheting Box 9mm . . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3260AL Wr Flex Ratcheting Box 11mm . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3260L Wr Flex Ratcheting Box 10mm . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3261L Wr Flex Ratcheting Box 12mm . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3262L Wr Flex Ratcheting Box 13mm . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3263L Wr Flex Ratcheting Box 14mm . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3264L Wr Flex Ratcheting Box 15mm . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3265L Wr Flex Ratcheting Box 16mm . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3266L Wr Flex Ratcheting Box 17mm . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3267L Wr Flex Ratcheting Box 18mm . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3268L Wr Flex Ratcheting Box 19mm . . . . . . . . . . . . . . . . . . . . . . . .142
BW-3330R 4 Pc Wr Rev Ratcheting Dbl Box Set . . . . . . . . . . . . . . . . . . .143
BW-3332R 4 Pc Wr Rev Ratcheting Dbl Box Set-Metric . . . . . . . . . . . .143
BW-6PTNB 6 Pc Polish Long Box End Wrench Set Sae . . . . . . . . . . . .133
BW-9718NB 18 Pc Polish Comb Wr Set Sae / Metric . . . . . . . . . . . . . . .122
BWE-1011MP Open End Wr 10 X 11 mm . . . . . . . . . . . . . . . . . . . . . . . . . . .132
BWE-1213MP Open End Wr 12 X 13 mm . . . . . . . . . . . . . . . . . . . . . . . . . . .132
BWE-1415MP Open End Wr 14 X 15 mm . . . . . . . . . . . . . . . . . . . . . . . . . . .132
BWE-1617MP Open End Wr 16 X 17 mm . . . . . . . . . . . . . . . . . . . . . . . . . . .132
BWE-1819MP Open End Wr 18 X 19 mm . . . . . . . . . . . . . . . . . . . . . . . . . . .132
BWE-2022MP Open End Wr 20 X 22 mm . . . . . . . . . . . . . . . . . . . . . . . . . . .132
BWE-67MP Open End Wr 6 X 7 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
BWE-89MP Open End Wr 8 X 9 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
BWS-1202P Wr Double Box End 5/16 X 3/8 . . . . . . . . . . . . . . . . . . . . . . . .134
BWS-1206P Wr Double Box End 7/16 X 1/2 . . . . . . . . . . . . . . . . . . . . . . . .134
BWS-1210P Wr Double Box End 1/2 X 9/16 . . . . . . . . . . . . . . . . . . . . . . . .134
BWS-1211P Wr Double Box End 9/16 X 5/8 . . . . . . . . . . . . . . . . . . . . . . . .134
BWS-1214P Wr Double Box End 11/16 X 3/4 . . . . . . . . . . . . . . . . . . . . . . .134
BWS-1216P Wr Double Box End 13/16 X 7/8 . . . . . . . . . . . . . . . . . . . . . . .134
BWS-1218P Wr Double Box End 15/16 X 1 . . . . . . . . . . . . . . . . . . . . . . . . .134
CT-1003 Chisel Cold 5/16 X 3/8 X 5 1/4 . . . . . . . . . . . . . . . . . . . . . . . . .162
CT-1004 Chisel Cold 3/8 X 7/16 X 5 1/2 . . . . . . . . . . . . . . . . . . . . . . . . .162
CT-1006 Chisel Cold 1/2 X 5/8 X 6 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . .162
CT-1008 Chisel Cold 5/8 X 3/4 X 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
CT-1010 Chisel Cold 3/4 X 7/8 X 7 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . .162
CT-105 Chisel Cold 5pc Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161
CT-1108 Chisel Long Cold 5/8 X 3/4 X 12 . . . . . . . . . . . . . . . . . . . . . . . .162
CT-1110 Chisel Long Cold 3/4 X 7/8 X 12 . . . . . . . . . . . . . . . . . . . . . . . .162
CT-114 Chisel And Punch Set 14 Pc . . . . . . . . . . . . . . . . . . . . . . . . .161
CT-1156 Chisel Flat Cape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
CT-1204 Chisel Round Nose 3/8 X 1/4 X 5 1/2 . . . . . . . . . . . . . . . . . . .162
CT-1254 Chisel Diamond Point 3/8 X 3/16 X 5 . . . . . . . . . . . . . . . . . . .162
CT-1303 Punch Center 3/8 X 5/32 X 5 . . . . . . . . . . . . . . . . . . . . . . . . . . .163
CT-1304 Punch Center 7/16 X 3/16 X 5 1/2 . . . . . . . . . . . . . . . . . . . . . . .163
CT-1306 Punch Center 1/2 X 1/4 X 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
CT-1314 Punch Scribing 3/8x 5/32 X 5 . . . . . . . . . . . . . . . . . . . . . . . . . .164
CT-1404 Punch Hand 3/8 X 3/16 X 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
CT-1453 Punch Pin 5/16 X 1/8 X 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
CT-1454 Punch Pin 5/16 X 5/32 X 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
CT-1456 Punch Pin 5/16 X 3/16 X 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
CT-1464 Punch Pin 3/8 X 1/4 X 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
CT-1466 Punch Pin 1/2 X 5/16 X 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
CT-1509 Punch Aligning 5/8 X 1/4 X 11 . . . . . . . . . . . . . . . . . . . . . . . . .164
CT-1554 Punch Taper 1/2 X 5/32 X 8 1/2 . . . . . . . . . . . . . . . . . . . . . . . .163
CT-1556 Punch Taper 1/2 X 3/16 X 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
CT-1558 Punch Taper 5/8 X 5/16 X 11 . . . . . . . . . . . . . . . . . . . . . . . . . . .163
CT-1606 Bar Pinch 1/2 X 5/8 X 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164
CT-1610 Bar Pinch 5/8 X 3/4 X 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164
CT-1617 Bar Pry 1/2 X 1 15/16 X 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164
CT-1620 Bar Pry 5/8 X 2 5/8 X 18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164
CT-205 Punch Pin 5pc Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161
DT-55 Screw Extractor Set 5pc . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177
ET-1005 Puller Midget Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166
ET-1007 Puller 6 Reversable Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167
ET-1008 Puller 7 Adjustable Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166
ET-1010 Puller 9 Reversible Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167
ET-1011 Puller 10 Adjustable Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . .166
ET-1068A Puller Pilot Bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168
ET-1071A Puller Battery Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169
ET-1156A Puller Hd Universal Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169
ET-1170A Puller 8 In 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167
ET-1205 Puller Tapered Bearing 2 1/4 . . . . . . . . . . . . . . . . . . . . . . . . .168
ET-1207 Puller Tapered Bearing 4 1/2 . . . . . . . . . . . . . . . . . . . . . . . . .168
ET-1322 Puller Gear And Pulley . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169
ET-1328A Puller Steering Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170
ProductID No. Description Page #
ProductID No. Description Page #
BlackH-index.qxd 6/27/05 3:41 PM Page 230
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
NU
ME
RIC
AL
IND
EX
231Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
N U M E R I C A L I N D E X
ET-1330 Puller Set Harmonic Balance . . . . . . . . . . . . . . . . . . . . . . . . .170
ET-1710 Puller Body Dent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168
EW-40NB 10 Pc Open End Ignition Wr Set . . . . . . . . . . . . . . . . . . . . . . .133
FN-1012MP Wr Flare Nut 10x12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
FN-1314MP Wr Flare Nut 13x14mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
FN-1402P Wr Flare Nut 3/8x7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
FN-1404P Wr Flare Nut 1/2x9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
FN-1406P Wr Flare Nut 5/8x11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
FN-1410P Wr Flare Nut 3/4" X1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
FN-1517MP Wr Flare Nut 15x17mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
FN-1921MP Wr Flare Nut 19x21mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
FN-4MNB 4 Pc Flare Nut Wr Set Metric . . . . . . . . . . . . . . . . . . . . . . . . .134
FN-4PTNB 4 Pc Flare Nut Wr Set Sae . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
FN-8PTNB 8 Pc Flare Nut Wr Set Sae / Metric . . . . . . . . . . . . . . . . . . . .134
FN-911MP Wr Flare Nut 9x11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
FT-1103 Blade Hacksaw 12" 18 Teeth High Speed . . . . . . . . . . . . . .180
FT-1124 Blade Hacksaw 12" 24 Teeth Flex . . . . . . . . . . . . . . . . . . . . .180
FT-1202 Hacksaw Adjustable Frame . . . . . . . . . . . . . . . . . . . . . . . . . .180
FT-1204 Hacksaw Adjustable Frame Deluxe . . . . . . . . . . . . . . . . . . .180
GW-1208 Skt 1/4 Dr 8pt 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1210 Skt 1/4 Dr 8pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1212 Skt 1/4 Dr 8pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1406 Skt 1/4 Dr Deep 12 Pt 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
GW-1407 Skt 1/4 Dr Deep 12 Pt 7/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
GW-1408 Skt 1/4 Dr Deep 12 Pt 12 Pt . . . . . . . . . . . . . . . . . . . . . . . . . . .101
GW-1409 Skt 1/4 Dr Deep 12 Pt 9/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
GW-1410 Skt 1/4 Dr Deep 12 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
GW-1411 Skt 1/4 Dr Deep 12 Pt 11/32 . . . . . . . . . . . . . . . . . . . . . . . . . . .101
GW-1412 Skt 1/4 Dr Deep 12 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
GW-1414 Skt 1/4 Dr Deep 12 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
GW-1416 Skt 1/4 Dr Deep 12 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
GW-1506 Skt 1/4 Dr Deep 6 Pt 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1507 Skt 1/4 Dr Deep 6 Pt 7/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1508 Skt 1/4 Dr Deep 6 Pt 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1509 Skt 1/4 Dr Deep 6 Pt 9/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1510 Skt 1/4 Dr Deep 6 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1511 Skt 1/4 Dr Deep 6 Pt 11/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1512 Skt 1/4 Dr Deep 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1514 Skt 1/4 Dr Deep 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1516 Skt 1/4 Dr Deep 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1605 Skt 1/4 Dr 6 Pt 5/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-1605M Skt 1/4 Dr 12 Pt 5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
GW-1606 Skt 1/4 Dr 6 Pt 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-1606M Skt 1/4 Dr 12 Pt 6mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
GW-1607 Skt 1/4 Dr 6 Pt 7/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-1607M Skt 1/4 Dr 12 Pt 7mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
GW-1608 Skt 1/4 Dr 6 Pt 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-1608M Skt 1/4 Dr 12 Pt 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
GW-1609 Skt 1/4 Dr 6 Pt 9/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-1609M Skt 1/4 Dr 12 Pt 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
GW-1610 Skt 1/4 Dr 6 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-1610M Skt 1/4 Dr 12 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
GW-1611 Skt 1/4 Dr 6 Pt 11/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-1611M Skt 1/4 Dr 12 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
GW-1612 Skt 1/4 Dr 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-1612M Skt 1/4 Dr 12 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
GW-1613M Skt 1/4 Dr 12 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
GW-1614 Skt 1/4 Dr 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-1616 Skt 1/4 Dr 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-1705 Skt 1/4 Dr 12 Pt 5/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1706 Skt 1/4 Dr 12 Pt 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1707 Skt 1/4 Dr 12 Pt 7/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1708 Skt 1/4 Dr 12 Pt 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1709 Skt 1/4 Dr 12 Pt 9/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1710 Skt 1/4 Dr 12 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1711 Skt 1/4 Dr 12 Pt 11/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1712 Skt 1/4 Dr 12 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1714 Skt 1/4 Dr 12 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-1716 Skt 1/4 Dr 12 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-504M Skt 1/4 Dr Deep 6 Pt 4mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-505M Skt 1/4 Dr Deep 6 Pt 5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-506M Skt 1/4 Dr Deep 6 Pt 6mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-507M Skt 1/4 Dr Deep 6 Pt 7mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-508M Skt 1/4 Dr Deep 6 Pt 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-509M Skt 1/4 Dr Deep 6 Pt 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-510M Skt 1/4 Dr Deep 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-511M Skt 1/4 Dr Deep 6 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-512M Skt 1/4 Dr Deep 6 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-513M Skt 1/4 Dr Deep 6 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-604M Skt 1/4 Dr 6 Pt 4mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-605M Skt 1/4 Dr 6 Pt 5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-606M Skt 1/4 Dr 6 Pt 6mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
ProductID No. Description Page #
ProductID No. Description Page #
BlackH-index.qxd 6/27/05 3:41 PM Page 231
Visit us at...www.stanleyproto.com232
NU
ME
RIC
AL
IND
EX
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
GW-607M Skt 1/4 Dr 6 Pt 7mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-608M Skt 1/4 Dr 6 Pt 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-609M Skt 1/4 Dr 6 Pt 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-610M Skt 1/4 Dr 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-611M Skt 1/4 Dr 6 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-612M Skt 1/4 Dr 6 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-613M Skt 1/4 Dr 6 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-645M Skt 1/4 Dr 6 Pt 4.5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-655M Skt 1/4 Dr 6 Pt 5.5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-705M Skt 1/4 Dr 12 Pt Dr 5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-706M Skt 1/4 Dr 12 Pt Dr 6mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-707M Skt 1/4 Dr 12 Pt Dr 7mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-708M Skt 1/4 Dr 12 Pt Dr 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-709M Skt 1/4 Dr 12 Pt Dr 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-710M Skt 1/4 Dr 12 Pt Dr 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-711M Skt 1/4 Dr 12 Pt Dr 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-712M Skt 1/4 Dr 12 Pt Dr 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-713M Skt 1/4 Dr 12 Pt Dr 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-755M Skt 1/4 Dr 12 Pt Dr 5.5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
GW-9545 Spinner Flex Handle 1/4 Dr . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-9550 Spinner Handle 1/4 Dr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-9578 Universal Joint 1/4 Dr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
GW-9749B Flex Handle 1/4 Dr X 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
GW-9898 Extension 1/4 Dr X 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
GW-9899 Extension 1/4 Dr X 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
GW-9935B Ratchet 1/4 Dr Round Head Flex . . . . . . . . . . . . . . . . . . . . . . .98
GW-9945B Ratchet 1/4 Dr Round Head . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
GW-9945BR Ratchet Renewal Kit 1/4 Dr (Gw 9945b / Gw 9935b) . . . . . . .98
GW-9946R Rotator® Ratchet 1/4 Dr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
GW-9955B Ratchet 1/4 dr round head polished q.r. . . . . . . . . . . . . . . . . .98
HT-1005-1 Hammer Ball Pein 16 Oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160
HT-1007-1 Hammer Ball Pein 24 Oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160
HT-1008-1 Hammer Ball Pein 32 Oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160
HT-1255 Hammer Rubber Mallet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160
HT-1452 Hammer Soft Face 12oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160
HT-1452T Hammer Replacement Tip For Ht 1452 . . . . . . . . . . . . . . . . .160
HT-1453 Hammer Soft Face 20oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160
HW-1507M Skt 3/8 Dr Deep 6 Pt 7mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1508M Skt 3/8 Dr Deep 6 Pt 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1509M Skt 3/8 Dr Deep 6 Pt 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1510 Skt 3/8 Dr Deep 6 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1510M Skt 3/8 Dr Deep 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1511M Skt 3/8 Dr Deep 6 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1512 Skt 3/8 Dr Deep 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1512M Skt 3/8 Dr Deep 6 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1513M Skt 3/8 Dr Deep 6 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1514 Skt 3/8 Dr Deep 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1514M Skt 3/8 Dr Deep 6 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1515M Skt 3/8 Dr Deep 6 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1516 Skt 3/8 Dr Deep 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1517M Skt 3/8 Dr Deep 6 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1518 Skt 3/8 Dr Deep 6 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1518M Skt 3/8 Dr Deep 6 Pt 18mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1519M Skt 3/8 Dr Deep 6 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1520 Skt 3/8 Dr Deep 6 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1520S Skt 3/8 Dr Spark Plug 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
HW-1522 Skt 3/8 Dr Deep 6 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1524 Skt 3/8 Dr Deep 6 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1526 Skt 3/8 Dr Deep 6 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1526S Skt 3/8 Dr Spark Plug 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .104
HW-1528 Skt 3/8 Dr Deep 6 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1530 Skt 3/8 Dr Deep 6 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1532 Skt 3/8 Dr Deep 6 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
HW-1607M Skt 3/8 Dr Deep 12 Pt 7mm . . . . . . . . . . . . . . . . . . . . . . . . . .107
HW-1608M Skt 3/8 Dr Deep 12 Pt 8mm . . . . . . . . . . . . . . . . . . . . . . . . . .107
HW-1609M Skt 3/8 Dr Deep 12 Pt 9mm . . . . . . . . . . . . . . . . . . . . . . . . . .107
HW-1610M Skt 3/8 Dr Deep 12 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . .107
HW-1611M Skt 3/8 Dr Deep 12 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . .107
HW-1612M Skt 3/8 Dr Deep 12 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . .107
HW-1613M Skt 3/8 Dr Deep 12 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . .107
HW-1614M Skt 3/8 Dr Deep 12 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . .107
HW-1615M Skt 3/8 Dr Deep 12 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . .107
HW-1616M Skt 3/8 Dr Deep 12 Pt 16mm . . . . . . . . . . . . . . . . . . . . . . . . .107
HW-1617M Skt 3/8 Dr Deep 12 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . .107
HW-1618M Skt 3/8 Dr Deep 12 Pt 18mm . . . . . . . . . . . . . . . . . . . . . . . . .107
HW-1619M Skt 3/8 Dr Deep 12 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . .107
HW-9404M Skt Bit 3/8 Dr Hex 4mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
HW-9405M Skt Bit 3/8 Dr Hex 5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
HW-9406M Skt Bit 3/8 Dr Hex 6mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
HW-9407M Skt Bit 3/8 Dr Hex 7mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
HW-9408M Skt Bit 3/8 Dr Hex 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
HW-9410M Skt Bit 3/8 Dr Hex 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
ProductID No. Description Page #
ProductID No. Description Page #
BlackH-index.qxd 6/27/05 3:41 PM Page 232
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
NU
ME
RIC
AL
IND
EX
233Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
N U M E R I C A L I N D E X
HW-9442 Skt Bit 3/8 Dr Hex 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
HW-9443 Skt Bit 3/8 Dr Hex 9/64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
HW-9444 Skt Bit 3/8 Dr Hex 5/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
HW-9445 Skt Bit 3/8 Dr Hex 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
HW-9446 Skt Bit 3/8 Dr Hex 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
HW-9447 Skt Bit 3/8 Dr Hex 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
HW-9448 Skt Bit 3/8 Dr Hex 7/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
HW-9449 Skt Bit 3/8 Dr Hex 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
HW-9450 S/D Bit 3/8 Dr Phillips #1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
HW-9451 S/D Bit 3/8 Dr Phillips #2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
HW-9452 S/D Bit 3/8 Dr Phillips #3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
HW-9453 S/D Bit 3/8 Dr Phillips #4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
HW-9504 S/D Bit 3/8 Dr 3/16 Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
HW-9505 S/D Bit 3/8 Dr 1/4 Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
HW-9506 S/D Bit 3/8 Dr 5/16 Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
MF-006 6 Pc Satin Comb Wr Set Sae . . . . . . . . . . . . . . . . . . . . . . . . .127
MF-008 8 Pc Satin Comb Wr Set Sae . . . . . . . . . . . . . . . . . . . . . . . . .127
MF-008M 8 Pc Satin Comb Wr Set Metric . . . . . . . . . . . . . . . . . . . . . . .127
MF-011 11 Pc Satin Comb Wr Set Sae . . . . . . . . . . . . . . . . . . . . . . . .126
MF-011M 11 Pc Comb Wr Set Metric . . . . . . . . . . . . . . . . . . . . . . . . . . .127
MF-014 14 Pc Comb Wr Set Sae . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
MF-017 17 Pc Satin Comb Wr Set Sae . . . . . . . . . . . . . . . . . . . . . . . . .125
MF-017M 17 Pc Satin Comb Wr Set Metric . . . . . . . . . . . . . . . . . . . . . .126
MT-1020-1 Feeler Gauge Non Magnetic 6 Pc . . . . . . . . . . . . . . . . . . . . .172
MT-1021A Feeler Gauge High Energy 6 Wire . . . . . . . . . . . . . . . . . . . . .172
MT-1022 Feeler Gauge Go No Go 22 Blade . . . . . . . . . . . . . . . . . . . . .174
MT-1024 Feeler Gauge Spark Plug + Ignition 23 Pc . . . . . . . . . . . . . .172
MT-1026A Feeler Gauge High Energy Spark Plug 6 Wire . . . . . . . . . .173
MT-1027A Feeler Gauge High Energy Spark Plug 7 Wire . . . . . . . . . .173
MT-1040-1 Feeler Gauge Regular Spark Plug 9 Pc . . . . . . . . . . . . . . . . .173
MT-1041 Feeler Gauge Regular 16 Pc . . . . . . . . . . . . . . . . . . . . . . . . . .173
MT-1042 Feeler Gauge Ignition 12 Pc . . . . . . . . . . . . . . . . . . . . . . . . . .173
MT-1043 Feeler Gauge Go No Go 15 Pc . . . . . . . . . . . . . . . . . . . . . . . . .174
MT-1048 Feeler Gauge Standard 10 Pc . . . . . . . . . . . . . . . . . . . . . . . . .174
MT-1049 Feeler Gauge All Purpose 25 Pc . . . . . . . . . . . . . . . . . . . . . .174
PT-1002-1 Pliers Hd Slip Joint 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
PT-1003-1 Pliers Slip Joint Comb 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
PT-1004-1 Pliers Slip Joint Comb 10 . . . . . . . . . . . . . . . . . . . . . . . . . . .154
PT-1050 Pliers Wire Stripper Crimper 8 . . . . . . . . . . . . . . . . . . . . . . .157
PT-1052-1 Pliers Diag Cutting 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156
PT-1057-1 Pliers Hd Diag Cutting 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156
PT-1060-1 Pliers Lg Diag Cutting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156
PT-1105 Pliers Locking 5" Curved Jaw . . . . . . . . . . . . . . . . . . . . . . . . .155
PT-1106 Pliers Locking 6" Long Nose . . . . . . . . . . . . . . . . . . . . . . . . . .155
PT-1107 Pliers Locking 7" Straight Jaw . . . . . . . . . . . . . . . . . . . . . . . .155
PT-1108-1 Pliers Linesman 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
PT-1110 Pliers Locking 10" Curved Jaw . . . . . . . . . . . . . . . . . . . . . . . .155
PT-1128-1 Pliers Longnose Sidecut 6 1/2 . . . . . . . . . . . . . . . . . . . . . . .156
PT-1149-1 Pliers Curved Needle Nose 6 . . . . . . . . . . . . . . . . . . . . . . . .157
PT-1150 Pliers Midget Diagonal Cut 5 . . . . . . . . . . . . . . . . . . . . . . . . .156
PT-1154 Pliers Midget Needle Nose 5 1/2 . . . . . . . . . . . . . . . . . . . . . .156
PT-1178 Pliers Duckbill Wiring 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
PT-1248-1 Pliers Large Riblock 12 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . .154
PT-1250-1 Pliers Riblock 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
PT-1251 Pliers Ignition 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
PT-1259 Pliers Battery 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
PT-1262 Plier Brake Spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175
PT-1263 Pliers Hd Parrot Nose 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
PT-1266 Pliers Lock Ring 7 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
PT-1280-1 Pliers Hose Clamp 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
PT-1285 Pliers Int/Ext Retaining Ring 5 3/4 . . . . . . . . . . . . . . . . . . . . .158
PT-1286 Pliers Combo Hd Internal Retaing Ring 8 1/8 . . . . . . . . . . . .158
PT-1287 Pliers 1pc External Retaining 5 13/16 . . . . . . . . . . . . . . . . . .158
PT-1288 Pliers 1pc Internal Retaining 5 9/16 . . . . . . . . . . . . . . . . . . .158
PT-1289 Pliers Int/Ext Retaining Bent 5 5/8 . . . . . . . . . . . . . . . . . . . . .158
PT-1300 Pliers Straight Nose Long Reach 11 1/2 . . . . . . . . . . . . . . . .155
PT-1310 Pliers Bent Nose Long Reach 11 1/2 . . . . . . . . . . . . . . . . . . .155
PT-1320 Pliers Long Reach Cutter/Gripper 11 . . . . . . . . . . . . . . . . . . .155
PT-3000 4 Pc Mini Long Reach Plier Set . . . . . . . . . . . . . . . . . . . . . . .155
ST-1004S S/D 4 X 1/4 Slotted Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
ST-1006S S/D 6 X 5/16 Slotted Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
ST-1008S S/D 8 X 3/8 Slotted Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
ST-1010S S/D 10 X 3/8 Slotted Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
ST-1024S S/D 4 X 1/4 Sq Shank Slotted Tip . . . . . . . . . . . . . . . . . . . . .147
ST-1026S S/D 6 X 5/16 Sq Shank Slotted Tip . . . . . . . . . . . . . . . . . . . .147
ST-1028S S/D 8 X 3/8 Sq Shank Slotted Tip . . . . . . . . . . . . . . . . . . . . .147
ST-1032S S/D 10 X 3/8 Sq Shank Slotted Tip . . . . . . . . . . . . . . . . . . . .147
ST-1043S S/D 3 X 3/16 Elec Slotted Tip . . . . . . . . . . . . . . . . . . . . . . . . .147
ST-1046S S/D 6 X 3/16 Elec Slotted Tip . . . . . . . . . . . . . . . . . . . . . . . . .147
ST-1048S S/D 10 X 3/16 Elec Slotted Tip . . . . . . . . . . . . . . . . . . . . . . . .147
ST-104S 4 Pc Combo Screwdriver Set . . . . . . . . . . . . . . . . . . . . . . . . .147
ST-105S 5 Pc Phillips Screwdriver Set . . . . . . . . . . . . . . . . . . . . . . . . .146
ProductID No. Description Page #
ProductID No. Description Page #
BlackH-index.qxd 6/27/05 3:41 PM Page 233
Visit us at...www.stanleyproto.com234
NU
ME
RIC
AL
IND
EX
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
ST-106S 5 Pc Slotted Screwdriver Set . . . . . . . . . . . . . . . . . . . . . . . . .146
ST-107S 7 Pc Combo Screwdriver Set . . . . . . . . . . . . . . . . . . . . . . . . .146
ST-1081S S/d 3 x no. 1 pt. Phillips tip . . . . . . . . . . . . . . . . . . . . . . . . . . .147
ST-1082S S/d 4 x no. 2 pt. Phillips tip . . . . . . . . . . . . . . . . . . . . . . . . . . .147
ST-1083S S/d 6 x no. 3 pt. Phillips tip . . . . . . . . . . . . . . . . . . . . . . . . . . .147
ST-1084S S/d 10 x no. 2 pt. Phillips tip . . . . . . . . . . . . . . . . . . . . . . . . . .147
ST-1140S S/d 1 1/2 x no. 2 pt. Stubby phillips tip . . . . . . . . . . . . . . . . .147
ST-1145S S/D 1 1/2 X 1/4 Stubby Slotted Tip . . . . . . . . . . . . . . . . . . . . .147
ST-1150S S/D 2 X 1/8 Pocket Slotted Tip . . . . . . . . . . . . . . . . . . . . . . .147
ST-1151S S/d 2 x no. 0 pt. Pocket phillips tip . . . . . . . . . . . . . . . . . . .147
ST-1166 Screw Starter Slotted 2 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . .148
ST-1167 Screw Starter Slotted 5 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . .148
ST-1168 Screw Starter Slotted 9 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . .148
ST-1171 Screw Starter Phillips 5 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . .148
ST-1183 S/D Offset 3/16 X 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
ST-1184 S/D Offset 3/16 X 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
ST-1185 S/D Offset 1/4 X 4 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
ST-1214 S/D Spark Detector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
ST-1250 Inspection Mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177
ST-127S 7 Pc Torx Screwdriver Set . . . . . . . . . . . . . . . . . . . . . . . . . . . .146
ST-608S S/D Torx T8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
ST-610S S/D Torx T10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
ST-615S S/D Torx T15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
ST-620S S/D Torx T20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
ST-625S S/D Torx T25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
ST-627S S/D Torx T27 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
ST-630S S/D Torx T30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
ST-800 Nut Driver 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
ST-801 Nut Driver 9/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
ST-803 Nut Driver 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
ST-806 Nut Driver 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
ST-809 Nut Driver 11/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
ST-812 Nut Driver 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
ST-815 Nut Driver 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
ST-818 Nut Driver 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
ST-828 Nutdriver Set Standard 8 Pc . . . . . . . . . . . . . . . . . . . . . . . . . .148
ST-829M Nutdriver Set Metric 9 Pc . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
ST-904M Nut Driver 4mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
ST-905M Nut Driver 5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
ST-907M Nut Driver 7mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
ST-908M Nut Driver 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
ST-909M Nut Driver 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
ST-910M Nut Driver 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
ST-911M Nut Driver 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
ST-912M Nut Driver 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
ST-955M Nut Driver 5.5 Mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
TR-3210 Skt 1/4 Dr Tamper Resistent Torx® T10 . . . . . . . . . . . . . . . .101
TR-3215 Skt 1/4 Dr Tamper Resistent Torx® T15 . . . . . . . . . . . . . . . .101
TR-3220 Skt 1/4 Dr Tamper Resistent Torx® T20 . . . . . . . . . . . . . . . .101
TR-3225 Skt 1/4 Dr Tamper Resistent Torx® T25 . . . . . . . . . . . . . . . .101
TR-3227 Skt 1/4 Dr Tamper Resistent Torx® T27 . . . . . . . . . . . . . . . .101
TR-3230 Skt 1/4 Dr Tamper Resistent Torx® T30 . . . . . . . . . . . . . . . .101
TR-3340 Skt 3/8 Dr Tamper Resistant Torx Internal T10 . . . . . . . . . .109
TR-3345 Skt 3/8 Dr Tamper Resistant Torx Internal T15 . . . . . . . . . .109
TR-3350 Skt 3/8 Dr Tamper Resistant Torx Internal T20 . . . . . . . . . .109
TS-1209 Skt 1/4 Dr Internal Torx® T9 . . . . . . . . . . . . . . . . . . . . . . . . . .101
TS-1210 Skt 1/4 Dr Internal Torx® T10 . . . . . . . . . . . . . . . . . . . . . . . . .101
TS-1215 Skt 1/4 Dr Internal Torx® T15 . . . . . . . . . . . . . . . . . . . . . . . . .101
TS-1220 Skt 1/4 Dr Internal Torx® T20 . . . . . . . . . . . . . . . . . . . . . . . . .101
TS-1225 Skt 1/4 Dr Internal Torx® T25 . . . . . . . . . . . . . . . . . . . . . . . . .101
TS-1227 Skt 1/4 Dr Internal Torx® T27 . . . . . . . . . . . . . . . . . . . . . . . . .101
TS-1230 Skt 1/4 Dr Internal Torx® T30 . . . . . . . . . . . . . . . . . . . . . . . . .101
TS-1340 Skt 3/8 Dr Internal Torx® T40 . . . . . . . . . . . . . . . . . . . . . . . .109
TS-1345 Skt 3/8 Dr Internal Torx® T45 . . . . . . . . . . . . . . . . . . . . . . . .109
TS-1347 Skt 3/8 Dr Internal Torx® T47 . . . . . . . . . . . . . . . . . . . . . . . .109
TS-1350 Skt 3/8 Dr Internal Torx® T50 . . . . . . . . . . . . . . . . . . . . . . . .109
TS-1355 Skt 3/8 Dr Internal Torx® T55 . . . . . . . . . . . . . . . . . . . . . . . .109
TS-1460 1/2" Drive Torx Sockets Internal T60 . . . . . . . . . . . . . . . . . .116
TS-2204 Skt 1/4 Dr External Torx® E4 . . . . . . . . . . . . . . . . . . . . . . . . .101
TS-2205 Skt 1/4 Dr External Torx® E5 . . . . . . . . . . . . . . . . . . . . . . . . .101
TS-2206 Skt 1/4 Dr External Torx® E6 . . . . . . . . . . . . . . . . . . . . . . . . .101
TS-2207 Skt 1/4 Dr External Torx® E7 . . . . . . . . . . . . . . . . . . . . . . . . .101
TS-2208 Skt 1/4 Dr External Torx® E8 . . . . . . . . . . . . . . . . . . . . . . . . .101
TS-2308 Skt 3/8 Dr External Torx® E8 . . . . . . . . . . . . . . . . . . . . . . . . .109
TS-2310 Skt 3/8 Dr External Torx® E10 . . . . . . . . . . . . . . . . . . . . . . . .109
TS-2312 Skt 3/8 Dr External Torx® E12 . . . . . . . . . . . . . . . . . . . . . . . .109
TS-2314 Skt 3/8 Dr External Torx® E14 . . . . . . . . . . . . . . . . . . . . . . . .109
TS-2316 Skt 3/8 Dr External Torx® E16 . . . . . . . . . . . . . . . . . . . . . . . .109
TS-2418 1/2" Drive Torx Sockets External E18 . . . . . . . . . . . . . . . . .116
TS-612NB 12 Pc 1/4" & 3/8" Dr Internal Torx Socket Set . . . . . . . . . . . .95
TS-627NB 12 Pc 1/4" & 3/8" Dr External Torx Socket Set . . . . . . . . . . . .96
U-1500 8 Piece Impact Socket Set . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
ProductID No. Description Page #
ProductID No. Description Page #
BlackH-index.qxd 6/27/05 3:41 PM Page 234
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
NU
ME
RIC
AL
IND
EX
235Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
N U M E R I C A L I N D E X
U-1501M 8 Piece Metric Impact Socket Set . . . . . . . . . . . . . . . . . . . . . .84
U-1508 Skt 3/8 Dr Impact 6 Pt 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
U-1508M Skt 3/8 Dr Impact 6 Pt 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1509M Skt 3/8 Dr Impact 6 Pt 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1510 Skt 3/8 Dr Impact 6 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
U-1510M Skt 3/8 Dr Impact 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1512 Skt 3/8 Dr Impact 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
U-1512M Skt 3/8 Dr Impact 6 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1513M Skt 3/8 Dr Impact 6 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1514 Skt 3/8 Dr Impact 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
U-1514M Skt 3/8 Dr Impact 6 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1515M Skt 3/8 Dr Impact 6 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1516 Skt 3/8 Dr Impact 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
U-1517M Skt 3/8 Dr Impact 6 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1518 Skt 3/8 Dr Impact 6 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
U-1518M Skt 3/8 Dr Impact 6 Pt 18mm . . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1519M Skt 3/8 Dr Impact 6 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1520 Skt 3/8 Dr Impact 6 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
U-1522 Skt 3/8 Dr Impact 6 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . .110
U-1524 Skt 3/8 Dr Impact 6 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
U-1608M Skt 3/8 Dr Impact 6 Pt 8mm . . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1609M Skt 3/8 Dr Impact 6 Pt 9mm . . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1610 Skt 3/8 Dr Impact Deep 6 Pt 15/16 . . . . . . . . . . . . . . . . . . . . .111
U-1610M Skt 3/8 Dr Impact 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1611M Skt 3/8 Dr Impact 6 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1612 Skt 3/8 Dr Impact Deep 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . .111
U-1612M Skt 3/8 Dr Impact 6 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1613M Skt 3/8 Dr Impact 6 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1614 Skt 3/8 Dr Impact Deep 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . .111
U-1614M Skt 3/8 Dr Impact 6 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1615M Skt 3/8 Dr Impact 6 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1616 Skt 3/8 Dr Impact Deep 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . .111
U-1616M Skt 3/8 Dr Impact 6 Pt 16mm . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1617M Skt 3/8 Dr Impact 6 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1618 Skt 3/8 Dr Impact Deep 6 Pt 9/16 . . . . . . . . . . . . . . . . . . . . .111
U-1618M Skt 3/8 Dr Impact 6 Pt 18mm . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1619M Skt 3/8 Dr Impact 6 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . .111
U-1620 Skt 3/8 Dr Impact Deep 6 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . .111
U-1622 Skt 3/8 Dr Impact Deep 6 Pt 11/16 . . . . . . . . . . . . . . . . . . . . .111
U-1624 Skt 3/8 Dr Impact Deep 6 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . .111
UW-1500 Skt 1/2 Dr Impact Wheel Lug . . . . . . . . . . . . . . . . . . . . . . . . . .116
UW-1505 Skt 1/2 Dr Impact Wheel Lug Kit . . . . . . . . . . . . . . . . . . . . . .116
UW-1512 Skt 1/2 Dr Impact Deep 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . .117
UW-1514 Skt 1/2 Dr Impact Deep 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . .117
UW-1516 Skt 1/2 Dr Impact Deep 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . .117
UW-1518 Skt 1/2 Dr Impact Deep 6 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . .117
UW-1520 Skt 1/2 Dr Impact Deep 6 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . .117
UW-1522 Skt 1/2 Dr Impact Deep 6 Pt 11/16 . . . . . . . . . . . . . . . . . . . . .117
UW-1524 Skt 1/2 Dr Impact Deep 6 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . .117
UW-1526 Skt 1/2 Dr Impact Deep 6 Pt 13/16 . . . . . . . . . . . . . . . . . . . . .117
UW-1528 Skt 1/2 Dr Impact Deep 6 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . .117
UW-1530 Skt 1/2 Dr Impact Deep 6 Pt 15/16 . . . . . . . . . . . . . . . . . . . . .117
UW-1532 Skt 1/2 Dr Impact Deep 6 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . .117
UW-1534 Skt 1/2 Dr Impact Deep 6 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . .117
UW-1536 Skt 1/2 Dr Impact Deep 6 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . .117
UW-1612 Skt 1/2 Dr Impact 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
UW-1614 Skt 1/2 Dr Impact 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
UW-1616 Skt 1/2 Dr Impact 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
UW-1618 Skt 1/2 Dr Impact 6 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
UW-1620 Skt 1/2 Dr Impact 6 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
UW-1622 Skt 1/2 Dr Impact 6 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .116
UW-1624 Skt 1/2 Dr Impact 6 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
UW-1626 Skt 1/2 Dr Impact 6 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .116
UW-1628 Skt 1/2 Dr Impact 6 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
UW-1630 Skt 1/2 Dr Impact 6 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .116
UW-1632 Skt 1/2 Dr Impact 6 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
UW-1634 Skt 1/2 Dr Impact 6 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . . . . . . .116
UW-1636 Skt 1/2 Dr Impact 6 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . .116
UW-1638 Skt 1/2 Dr Impact 6 Pt 1 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . .116
UW-1640 Skt 1/2 Dr Impact 6 Pt 1 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . .116
UW-24 Extension Impact1/2 Dr X 5 . . . . . . . . . . . . . . . . . . . . . . . . . . .118
UW-2424 Skt 3/4 Dr Impact 6 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
UW-2426 Skt 3/4 Dr Impact 6 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .120
UW-2428 Skt 3/4 Dr Impact 6 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
UW-2430 Skt 3/4 Dr Impact 6 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .120
UW-2432 Skt 3/4 Dr Impact 6 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
UW-2434 Skt 3/4 Dr Impact 6 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . . . . . . .120
UW-2436 Skt 3/4 Dr Impact 6 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . .120
UW-2438 Skt 3/4 Dr Impact 6 Pt 1 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . .120
UW-2440 Skt 3/4 Dr Impact 6 Pt 1 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . .120
UW-2442 Skt 3/4 Dr Impact 6 Pt 1 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . .120
UW-2444 Skt 3/4 Dr Impact 6 Pt 1 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . .120
ProductID No. Description Page #
ProductID No. Description Page #
BlackH-index.qxd 6/27/05 3:41 PM Page 235
Visit us at...www.stanleyproto.com236
NU
ME
RIC
AL
IND
EX
Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.
UW-2446 Skt 3/4 Dr Impact 6 Pt 1 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . .120
UW-2448 Skt 3/4 Dr Impact 6 Pt 1 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . .120
UW-25 Extension Impact 1/2 Dr X 10 . . . . . . . . . . . . . . . . . . . . . . . . . .118
UW-2624 Skt 3/4 Dr Impact Deep 6 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . .120
UW-2626 Skt 3/4 Dr Impact Deep 6 Pt 13/16 . . . . . . . . . . . . . . . . . . . . .120
UW-2628 Skt 3/4 Dr Impact Deep 6 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . .120
UW-2630 Skt 3/4 Dr Impact Deep 6 Pt 15/16 . . . . . . . . . . . . . . . . . . . . .120
UW-2632 Skt 3/4 Dr Impact Deep 6 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . .120
UW-2634 Skt 3/4 Dr Impact Deep 6 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . .120
UW-2636 Skt 3/4 Dr Impact Deep 6 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . .120
UW-2638 Skt 3/4 Dr Impact Deep 6 Pt 1 3/16 . . . . . . . . . . . . . . . . . . . . .120
UW-2640 Skt 3/4 Dr Impact Deep 6 Pt 1 1/4 . . . . . . . . . . . . . . . . . . . . . .120
UW-2642 Skt 3/4 Dr Impact Deep 6 Pt 1 5/16 . . . . . . . . . . . . . . . . . . . . .120
UW-2644 Skt 3/4 Dr Impact Deep 6 Pt 1 3/8 . . . . . . . . . . . . . . . . . . . . . .120
UW-2646 Skt 3/4dr Impact Deep 6 Pt 1 7/16 . . . . . . . . . . . . . . . . . . . . . .120
UW-2648 Skt 3/4dr Impact Deep 6 Pt 1 1/2 . . . . . . . . . . . . . . . . . . . . . . .120
UW-30 Extension Impact1/2 Dr X 3 . . . . . . . . . . . . . . . . . . . . . . . . . . .118
UW-30 Extension Impact 1/2 Dr X 2 5/8 . . . . . . . . . . . . . . . . . . . . . . .116
UW-510M Skt 1/2 Dr Impact Deep 6 Pt 10mm . . . . . . . . . . . . . . . . . . . .117
UW-511M Skt 1/2 Dr Impact Deep 6 Pt 11mm . . . . . . . . . . . . . . . . . . . .117
UW-512M Skt 1/2 Dr Impact Deep 6 Pt 12mm . . . . . . . . . . . . . . . . . . . .117
UW-513M Skt 1/2 Dr Impact Deep 6 Pt 13mm . . . . . . . . . . . . . . . . . . . .117
UW-514M Skt 1/2 Dr Impact Deep 6 Pt 14mm . . . . . . . . . . . . . . . . . . . .117
UW-515M Skt 1/2 Dr Impact Deep 6 Pt 15mm . . . . . . . . . . . . . . . . . . . .117
UW-516M Skt 1/2 Dr Impact Deep 6 Pt 16mm . . . . . . . . . . . . . . . . . . . .117
UW-517M Skt 1/2 Dr Impact Deep 6 Pt 17mm . . . . . . . . . . . . . . . . . . . .117
UW-518M Skt 1/2 Dr Impact Deep 6 Pt 18mm . . . . . . . . . . . . . . . . . . . .117
UW-519M Skt 1/2 Dr Impact Deep 6 Pt 19mm . . . . . . . . . . . . . . . . . . . .117
UW-520M Skt 1/2 Dr Impact Deep 6 Pt 20mm . . . . . . . . . . . . . . . . . . . .117
UW-521M Skt 1/2 Dr Impact Deep 6 Pt 21mm . . . . . . . . . . . . . . . . . . . .117
UW-522M Skt 1/2 Dr Impact Deep 6 Pt 22mm . . . . . . . . . . . . . . . . . . . .117
UW-524M Skt 1/2 Dr Impact Deep 6 Pt 24mm . . . . . . . . . . . . . . . . . . . .117
UW-526M Skt 1/2 Dr Impact Deep 6 Pt 26mm . . . . . . . . . . . . . . . . . . . .117
UW-527M Skt 1/2 Dr Impact Deep 6 Pt 27mm . . . . . . . . . . . . . . . . . . . .117
UW-610M Skt 1/2 Dr Impact 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . .117
UW-611M Skt 1/2 Dr Impact 6 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . . .117
UW-612M Skt 1/2 Dr Impact 6 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . .117
UW-613M Skt 1/2 Dr Impact 6 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . .117
UW-614M Skt 1/2 Dr Impact 6 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . . .117
UW-615M Skt 1/2 Dr Impact 6 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . . .117
UW-616M Skt 1/2 Dr Impact 6 Pt 16mm . . . . . . . . . . . . . . . . . . . . . . . . . .117
UW-617M Skt 1/2 Dr Impact 6 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . . .117
UW-618M Skt 1/2 Dr Impact 6 Pt 18mm . . . . . . . . . . . . . . . . . . . . . . . . . .117
UW-619M Skt 1/2 Dr Impact 6 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . . .117
UW-620M Skt 1/2 Dr Impact 6 Pt 20mm . . . . . . . . . . . . . . . . . . . . . . . . . .117
UW-621M Skt 1/2 Dr Impact 6 Pt 21mm . . . . . . . . . . . . . . . . . . . . . . . . . .117
UW-622M Skt 1/2 Dr Impact 6 Pt 22mm . . . . . . . . . . . . . . . . . . . . . . . . . .117
UW-624M Skt 1/2 Dr Impact 6 Pt 24mm . . . . . . . . . . . . . . . . . . . . . . . . . .117
UW-627M Skt 1/2 Dr Impact 6 Pt 27mm . . . . . . . . . . . . . . . . . . . . . . . . . .117
UWP-1460 Skt 1 Dr Budd Wheel 13/16 & 1 1/2 . . . . . . . . . . . . . . . . . . . .120
UWP-430M Skt 1/2 Dr Axle Nut Deep 6 Pt 30mm . . . . . . . . . . . . . . .116, 120
UWP-436M Skt 1/2 Dr Axle Nut Deep 6 Pt 36mm . . . . . . . . . . . . . . . .116120
UWP-660 Skt 3/4 Dr Budd Wheel 13/16 & 1 1/2 . . . . . . . . . . . . . . . . . . .120
XT-1011 Wr Distributor 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175
XT-1012 Wr Distributor 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175
XT-1060 Separator Ball Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176
ZT-1102 Scraper Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179
ZT-1111 Scraper Carbon 1 1/4 X 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179
ZT-1112 Degreasing Scraper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179
ZT-1125 Tubing Bender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178
ZT-1180 Holder Flexible Retriever . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176
ZT-1193 Magnetic Pick Up Tool 16 1/2 To 27 . . . . . . . . . . . . . . . . . . . .176
ZT-1197 Magnetic Pick Up Tool 18 . . . . . . . . . . . . . . . . . . . . . . . . . . . .177
ZT-1300 Brush Knot End Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178
ZT-1301 Brush Carbon Cleaning End . . . . . . . . . . . . . . . . . . . . . . . . . .178
ZT-1305 Wire Wheel Heavy Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178
ZT-1310 Brush Tire And Rim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179
ZT-1312 Brush And Scraper Heavy D . . . . . . . . . . . . . . . . . . . . . . . . . .179
ZT-1550 Separator Shock Absorber Link . . . . . . . . . . . . . . . . . . . . . . .176
ZW-1045A-A Wr Ratcheting A/C 1/4 X 3/16 Sq 1/2 X 9/16 Hex . . . . . . . . .135
ZW-53 13 Pc Set Hex Key Wrench Set Sae . . . . . . . . . . . . . . . . . . . .152
ZW-59 13 Pc Long Hex Key Wrench Set Sae . . . . . . . . . . . . . . . . . .152
ZW-69 9 Pc Hex Key Wrench Set Metric . . . . . . . . . . . . . . . . . . . . .152
ProductID No. Description Page #
ProductID No. Description Page #
BlackH-index.qxd 6/27/05 3:41 PM Page 236
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
NU
ME
RIC
AL
IND
EX
237Toll Free Customer Service Number: 1-800-800-TOOL
Customer Service FAX Number: 1-770-648-9108
N U M E R I C A L I N D E X
LIMITED LIFETIME WARRANTY
The Stanley Works and Proto Industrial Tools (collectively referred to as “TSW/Proto”) warrants any of its manufactured products for the useful life of the product against deficiency in material or workmanship.
Torque Wrenches, Multipliers and Testers are warranted for one year, except for calibration which is warranted for 90 days from date of purchase. Torque products can be repaired and recalibrated for a nominal charge at the Stanley-Proto® Authorized repair center (2195 East View Parkway, Suite 103, Conyers, GA 30013). Defects in material or workmanship will be repaired or replaced at no cost, all other repairs will be at a nominal charge. Torque products areprecise measuring devices that require care in handling. Stanley-Proto® recommends that all micrometer wrenches berecalibrated once a year or more, depending on usage.
Disclaimers and limitations:• Is subject to the disclaimers and limitations described below and is in lieu of all other warranties, express or implied,
including the implied warranty of merchantability or fitness for a particular purpose.• Gives you specific legal rights. You may also have other rights that vary by state.• Does not extend to products that have been improperly used, altered, or repaired by any entity other than TSW/Proto.• Does not extend to any claim for incidental, consequential, or special damages. Some states do not allow the
exclusion of limitation of incidental or consequential damages, so this exclusion may not apply to you.• TSW/Proto makes no representations beyond those contained in this Limited Lifetime Warranty.• Agents of TSW/Proto have no authority to make representations of any sort beyond those contained in this Limited
Lifetime Warranty.
Exclusive remedy and claim procedure:• The exclusive remedy under this Limited Lifetime Warranty for products determined to be deficient in materials or
workmanship by TSW/Proto is repair or replacement with a reconditioned tool of equal value by TSW/Proto.• The selected remedy is at the sole discretion of TSW/Proto. In no event shall TSW/Proto be responsible for more than
the original purchase price of the product.
Questions:To ask questions about, or to make a claim under this Limited Lifetime Warranty, contact your Stanley-Proto TerritoryManager or a Manufacturer’s Representative.
BlackH-index.qxd 6/27/05 3:41 PM Page 237
©2005 The Stanley Works2195 East View Parkway, Suite 103, Conyers, GA 30013
1-800-800-TOOL www.stanleyproto.comT20505
T20505_BHBP_Cover 6/28/05 1:09 PM Page 2