37 cube low voltage - artemide north america...artemide inc. 250, karin lane, hicksville (ny) 11801...
TRANSCRIPT
-
Artemide inc.250, Karin Lane, Hicksville (NY) 11801T. +1 631 694 9292 | [email protected] | www.artemide.net
Artemide Ltd.11105, rue Renaude Lapointe, Montréal (QC) H1J 2T4
T. +1 514 323 6537 | [email protected] | www.artemide.net1
37 CUBELOW VOLTAGE Assembly instructions
Y503-11528rev 0.1
Attention: Read and understand these instructions before installing fixture. This fixture is intended for installation in accordance with National Electric Code and local regulation: To assure full compliance with local codes and regulations, check with your local electrical inspector before installation. This equipment is guaranteed only when used as indicated in these instructions; therefore they should be kept for future reference. To prevent electrical shock, turn off power supply before carrying out any connection or maintenance operations.
Your box should contain ;complete fixture STEP 1 1. Cut a circular opening in the ceiling
STEP 2 1. Unscrew junction box cover and remove.
STEP 2A For Low-volatage wires :
1. Pass wire through bushing.2. pass inside strain relief and tighten the screws
STEP 3 1. Make appropriate con-nections.
2. Screw junction box cover back.
STEP 2B For BX conduit or Loomex wires :
1. Remove bushing, screws and strain relief bracket2. Install BX conduit or loomex connector (not included).
3.1
D D = 2 1/4’’
5.7 cm
2.1
2B.1
2A.1
2A.2
FIXTUREWIRES
CEILINGWIRES
Black
White White +
Black -
strain relief bracket
2B.2
This luminaire is compatible with 12 Volts AC or DC circuits.
-
Artemide inc.250, Karin Lane, Hicksville (NY) 11801T. +1 631 694 9292 | [email protected] | www.artemide.net
Artemide Ltd.11105, rue Renaude Lapointe, Montréal (QC) H1J 2T4
T. +1 514 323 6537 | [email protected] | www.artemide.net2
37 CUBELOW VOLTAGE Assembly instructions
Y503-11528rev 0.1
STEP 4 1. Push mounting springs upward.2. Insert the fixture in the ceiling.3. Fixture installed
4.3
4.14.2