35 accessories.en
TRANSCRIPT
-
7/30/2019 35 Accessories.en
1/6
930-168B-EN
Transducers, Cables, Couplants
and Test Blocks or Ultrasonic
Precision Thickness Gages
Oympus NDT oers a ompete seetiono transduers, abes, oupants,aibration test boks, and aessories to
meet a wide variety o utrasoni preisionthikness gaging appiations.
Utrasoni thikness gages are usedto preisey measure wa thikness invirtuay any engineering materia metas, pastis, eramis, omposites, andmore. Aess to ony one side o the partis required and a wide variety o materiasan be measured with a singe instrument.
Panametris-NDT Mirosan transduersare requenty used with the Series 25and Series 35 thikness gages, as we asother ommeriay avaiabe thikness
gages, aw detetors, and utrasoniinstrumentation.
Mirosan transduer part numbers reetthe onnetor designation:
RM = Right Ange MirodotSM = Straight MirodotRB = Right Ange BNcSB = Straight BNcSU = Straight UHF
When seeting a transduer, pease reviewthe hart beow or onsut the TransduerFrequeny Range in the InstrutionManua that was shipped with your gage.
ThiCkNESS GAGE
MoDEL
TrANSDuCEr
FrEquENCy rANGE
35, 35DL
25, 25DL
25DL PLUS25MULTI PLUS
2.0 to 30 MHz
35HP, 35DL-HP
25HP PLUS
25HPV
0.5 to 5.0 MHz
-
7/30/2019 35 Accessories.en
2/6
rM = rgt Angle Mcdt; SM = Stagt Mcdt; SB = Stagt BNChg Penetatn Tansdce *use wt hlde, P/N 2133 **use wt hlde, P/N 2132
Feenc (Mhz)
Element
DameteTansdce
Pat Nmbences mm
0.5 1.00 25 M101-SB
1.0 1.00 25 M102-SB
1.0 0.50 13 M103-SB
2.25 0.5 13 M106-RM, M106-SM
2.25 0.5 13 M1036
5.0 0.50 13 M109-RM, M109-SM
5.0 0.25 6 M110-RM , M110-SM, M110H-RM**
10 0.25 6 M112-RM, M112-SM, M112H-RM**
10 0.125 3 M1016-RM
20 0.125 3 M116-RM, M116-SM
20 0.125 3 M116H-RM*
One o the advantages o a Panametris-NDT Mirosanontat transduer is its versatiity; a singe transduer an overa broad thikness range in many engineering materias. contattransduers are onstruted with the unique Wc-5 wearpate orgreater durabiity and onger ie.
M101-SBM103-SB
M102-SB M1036
The Sonopen transduer has a repaeabe deay ine that is tapered to a sma ontat area. This transduermakes reiabe thikness measurements in appiations suh as turbine bades, threads on pasti botte neksand tight radii on pasti ontainers. High-temperature Sonopen deay ines are aso avaiabe.
V260-45 V260-SM V260-RM
M106-RM
M106-SM
M109-RM
M109-SM
M110-RM
M106
M112-RMM116-RMM116-SM
M112-SM
Contact Transducers
Sonopen Transducers
Snpen replaceable Dela Lnes
Tp DametePat Nmbe
nces mm
0.080 2.0 DLP-3
0.060 1.5 DLP-302
0.080 2.0 DLP-301*
* hg tempeate dela se p t 350 F (175 C)
Spng Laded hlde
SLH-V260-SM*
* F se wt V260-SM nl.
Feenc
Mhz
Nmnal
Element Sze
Tansdce
Pat Nmbes
nces mm
Stagt
handle
rgt Angle
handle
45
handle
15 0.125 3 V260-SM V260-RM V260-45
DlP-301
-
7/30/2019 35 Accessories.en
3/6www.olympusNDT.com
Feenc
(Mhz)
Element
DameteTansdce
Pat Nmbehldes
nces mm
0.5 1.00 25 M2008
2.25 0.50 13 M207-RB
5.0 0.50 13 M206-RB
5.0 0.25 6 M201-RM
5.0 0.25 6 M201H-RM 2127
10 0.25 6 M202-RM, M202-SM
10 0.25 6 M202H-RM 2127
10 0.125 3 M203-RM, M203-SM
20 0.125 3 M208-RM, M208-SM
20 0.125 3 M208H-RM 2133
20 0.125 3 M2055*
30 0.25 6 V213-BC-RM*
* Dela lne s nt eplaceable n tese tansdces.
Element
Dametehg Tempeate Delas
nces mm T 350F
(175C)
T 500F
(260C)
T 900F
(480C)
0.50 13 DLHT-201 DLHT-2 DLHT-2G
0.25 6 DLHT-101 DLHT-1 DLHT-1G
0.125 3 DLHT-301 DLHT-3 DLHT-3G
Element
Damete
Dela Lne
Pat Nmbe
Maxmm Tcness
Measement Lmt*
Steel - Mde 2 Steel - Mde 3 Plastc - Mde 2
nces mm nces mm nces mm nces mm
0.50 13 DLH-2 1.0 25 0.5 13 0.5 13
0.25 6 DLH-1 1.0 25 0.5 13 0.5 13
0.125 3 DLH-3 0.5 13 0.2 5 0.2 5
* Exact ange depends n mateal snd velct, tansdce eenc,
pat gemet, and sace cndtn.
M2055
M201M202
M2008
M206-RB 2127
M208
M208H
Panametris-NDT Mirosan deay ine transduers provide exeentperormane on very thin materias, eevated temperatures, or inappiations that require a high degree o thikness resoution.
High Temperature Delay LinesHigh temperature deay ines untion as a protetive buer betweenthe hot surae o the test piee and the transduers rysta. At e-evated temperatures, intermittent ontat is reommended to protetthe transduer rom therma damage.
Delay Line Transducers
2133
Replaceable Delay Lines
DlH-2
DlH-1
DlH-3
DlHT-1GDlHT-2G
DlHT-3G
DlHT-101
DlHT-201DlHT-301
DlHT-2
DlHT-3DlHT-1
-
7/30/2019 35 Accessories.en
4/6
Pat
Nmbe
openng Wate PatFts Tansdce Pat Nmbe
nces mm nces mm
B100 0.125 3 1.250 32 M310A-SM, M312A-SM, M316A-SM
B103** 0.350 9 0.575 14.5 M310-SU, M312-SU, M313-SU, M316-SU
B103W 0.550 14 0.775 19.7 M306-SU, M309-SU
B103A** 0.350 9 0.575 14.5 same as B103
** Te B103 as a V-ntc saped penng; te B103A and B103W ae fat.
Case damete s 0.63 n (16 mm) and te lengt s 1.53 n (38.86 mm)
BubblersWe oer bubbers or easy impementation oimmersion testing. They at as a hoder or thetransduers to maintain onsistent water owrom transduer to test surae and prevent theaumuation o air bubbes on the transduerae.
Bubbler Transducer AssemblyHandhed bubber transduers are avaiabe ineither 20 MHz (V316B) or 10 MHz (V312B)sizes. They are immersion transduers that srewonto a bubber assemby (B120), whih has arepaeabe stainess stee tip and a water eedtube. They oer high resoution and easy aessinspetion o thin materias.
Feenc (Mhz)Element Damete
Tansdce Pat Nmbences mm
2.25 0.50 13 M306-SU
5.0 0.50 13 M309-SU
5.0 0.25 6 M310-SU
10 0.25 6 M312-SU
15 0.25 6 M313-SU
20 0.125 3 M316-SU
The RBS-1 immersion tank is designed to simpiy utrasoni thikness
measurements using immersion tehniques. It onsists o a eararyi tank, a submersibe pump, and a transduer fxture in a singe,portabe unit. It is idea or oine thikness measurements on meta,gass and pasti produts suh as sma ontainers, pipe or tubing,sheets or pates, or mahined parts.
Tank5.5 x 12 x 8 in (140 x 305 x 200 mm)0.83 gaon (3.1 iter) apaity
Pump0 to 0.25 gaons (0 to 0.9 iters) per minute115 or 230 V, 30 watt (votage range 90 to 135 VAc), 50 to 60 HzSubmersibe (ground aut interrupter iruit reommended)
B100
B120
B103AB103
M306-SUM316-SU
M313-SU
M312-SU
Panametris-NDT Mirosan immersion transduers aredesigned to transmit and reeive utrasound in water.Thikness measurements by immersion tehnique areoten preerred when the test piee has a ompexgeometry or in onine appiations. Typia oineappiations inude wa thikness measurements onsma diameter pasti or meta tubing, sanned or rotarymeasurements and thikness measurements on sharpy
urved parts. Transduer ousing may be neessarydepending on the appiation.
Immersion Transducers
RBS-1 Immersion Tank
Feenc
(Mhz)
Nmnal
Element Sze
Fcal
Lengt
Tansdce
Pat Nmbe
Bbble
Assembl
replacement
TpFlexble Tp
nces mm nces mm
10 0.25 6 1.00 25 V312B-RM B120 B120-TIP B120-FLEX-TIP
20 0.125 3 0.75 19 V316B-RM B120 B120-TIP B120-FLEX-TIP
-
7/30/2019 35 Accessories.en
5/6
Pat Nmbe Descptn Vlme Applcatn
A2
Propylene Glycol
2 oz (0.06 liter) General purpose couplant or smooth suraces. Chemically
non-reactive, does not evaporate quickly. The maximum
recommended temperature is 200 F (90 C)AP 1 pint (0.47 liter)
AQ 1 quart (0.95 liter)
AG 1 gallon (3.78 liter)
B2
Glycerin
2 oz (0.06 liter) General purpose, more viscous and has a high acoustic
impedence making it the preerred couplant or rough
suraces and highly attenuating materials.BQ 1 quart (0.95 liter)
C2Silicone Oil 2 oz (0.06 liter)
General purpose, non-corrosive, does not evaporate, and is
insoluble in water.
D12
Gel Type
12 ounces (0.35 liter) Rough suraces such as sand-cast metals and berglass
layups. Weld inspections, overhead suraces, or vertical walls.DG 1 gallon (3.78 liter)
D-5G 5 gallons (18.90 liter)
E-2Ultratherm 2 oz (0.06 liter)
500 to 1,000 F (260 to 540 C), remains a stable liquid or
paste without boiling o
G-2Medium Temp 2 oz (0.06 liter)
0 to 600 F (-12 to 315 C), easy removal at high
temperatures, non-toxic, and biodegradable.
SWCShear Wave 4 oz (0.12 liter)
Normal Incidence Shear Wave, non-toxic, water soluble,
organic substance o very high viscosity.
HP-G
Powdered
Couplant
Makes 1 gallon (3.78 liter)Bulk couplant: Customize the viscosity by adding dierent
amounts o water.
Temperature range or this couplant is 32 to 130 F
(0 to 54 C).
Can be winterized by mixing with windshield washer fuid.
HP-G-C Makes 1 gallon (3.78 liter)
The use o oupant is amostaways neessary to provideaousti ouping betweenthe transduer and the testpiee. We oer various typeso oupants to suit virtuay aappiations.
Pat Nmbe Mateal Steps
2211E 304 Stainless Steel .100, .200, .300, .400 and .500 in
2212E 1018 Carbon Steel .250, .500, .750, .400 and 1.00 in
2213E 7075-T6 Aluminum .100, .200, .300, .400 and .500 in
2214E 1018 Carbon Steel .100, .200, .300, .400 and .500 in2214M 1018 Carbon Steel 2.5, 5.0, 7.5, 10.0 and 12.5 mm
Test boks are neessary or the aibration o utrasonithikness gages and shoud be used to maintain and veriythe auray, dependabiity, and reiabiity o utrasonimeasurements. Boks are hed to tighter toeranes thanstated in ASTM E797 ode. Metri test boks are avaiabe.
2214E
2212E
2214M
Couplants
Calibration Test Blocks
-
7/30/2019 35 Accessories.en
6/6
Oympus-NDT oers a wide seetion o transduer abes suitabeor a utrasoni thikness gaging instrumentation.
Pat Nmbe Cnnects Avalable Lengts
LCM-74-X Small LEMO 00 to Microdot 3 t (0.9 m), 4 t (1.2 m), 6 t (1.8 m)
LCB-74-X Small LEMO 00 to BNC 3 t (0 .9 m), 4 t (1.2 m), 6 t (1.8 m
BCM-74-X BNC to Microdot 3 t (0.9 m), 4 t (1.2 m), 6 t (1.8 m)
LCU-74-X LEMO 00 to UHF 3 t (0.9 m)
BcM-74 lcB-74 lcM-74 lcU-74
Standard abes are reommended ornorma usage.
Heavy duty, Teon (HD) transduerabes may provide durabiity and ongerie.
Waterproo (W) abes are reommendein many tests with immersion transdueThese abes provide a waterprooonnetion good to approximatey 30 t(10 m) o resh water. At greater depths,speia abes are avaiabe.
Heavy duty, armored PVc jaket (HDAP)transduer abes have a spira stainessstee jaket with a soid PVc oating.Maximum ength is 20 t (7 m).
Heavy duty, armored super exibesiione jaket (HDAS) transduer abesombine a spira stainess stee jaketwith a heavy siione oating or greatexibiity. length an be speifed up to20 t (7 m).
Heavy duty, armored, stainess stee ja(SSA) transduer abes are reommendor heavy and industria use to provideexibiity, protetion and ong ie.
Standard Heavy Duty Tefon Waterproo
Heavy Duty
Armored PVC Jacket
Heavy Duty
Armored Silicone Jacket
Heavy Duty
Stainless Steel
Oympus NDT is aso represented bya network o we-trained, experiened
representatives oated in most majorindustria regions around the word.Visitwww.olympusNDT.com to oate yournearest representative.
X = lengt cable, please spec m avalable lengts (3, 4 6).
Transducer Cables
Copyright 2008 by Olympus NDT. All brands are trademarks or registered trademarks o their respective owners.
All specifcations are subject to change without notice
Olympus NDT48 Woerd Avenue Waltham, MA 02453 USA
Tel.: (1) 781-419-3900 Fax: (1) 781-419-3980
12569 Gulf Freeway Houston, TX 77034 USA
Tel.: (1) 281-922-9300 Fax: (1) 952-487-8877
Olympus NDT u.K. lTD.12 Nightingale Close R otherham, South Yorkshire S60 2AB UK
Olympus siNgapOre pTe. lTD.491B River Valley Road 12-01/04, Valley Point Ofce Tower, 248373 Singapore
Olympus ausTralia pTy. lTD.
PO Box 985 Mount Waverley, VIC 3149 Australia
www.olympusNDT.com