34-62H — ADA Compliant ?· 34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

Download 34-62H — ADA Compliant ?· 34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

Post on 05-Feb-2018

219 views

Category:

Documents

5 download

TRANSCRIPT

  • 40-4

    0H

    A

    DA

    Com

    plia

    nt

    Dimensions subject to change without notice.

    Contact Florestone Products to verify

    product specifications.

    ADACOMPLIANT*

    Dimensions may vary " inch. Please check unit before installation.

    For barrier-free installation, contractor shall provide " minimum recess for curb in sub floor.

    ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons is a Registered Trade Mark of Symmons Industries, Inc.Moen is a Registered Trade Mark of Moen Corporation.

    Architects Specifications

    Furnish and install one-piece gel-coated fiberglass shower stall Model 40-40H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons pressure balance mixing valve with concealed check stops; Moen

    hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).

    Supplied with 2" brass drain.

    Shower curtain optional.

    Curtain Size: 45" x 72".

    Standard Color: White.

    Special order colors available.

    Florestone Model 40-40H Barrier-Free Shower

    2851 Falcon Drive Madera, CA 93637

    T. 559.661.4171 T. 800.446.8827

    F. 559.661.2070 florestone.com

    40" x 40" x 80" Weight: 205 lbs.

    18" above inside

    33" to 36" above inside

    "

    77"

    80"

    40"

    20"1"

    1"

    19"

    40"36"

    36"

    1"

    Standards:

    I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1

    Specify Right or Left Hand Seat

  • Dimensions subject to change without notice.

    Contact Florestone Products to verify

    product specifications.

    ADACOMPLIANT*

    Dimensions may vary " inch. Please check unit before installation.

    For barrier-free installation, contractor shall provide " minimum recess for curb in sub floor.

    ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons is a Registered Trade Mark of Symmons Industries, Inc.Moen is a Registered Trade Mark of Moen Corporation.

    Architects Specifications

    Furnish and install three-piece gel-coated fiberglass shower stall Model 3PC-40-40H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons pressure balance mixing valve with concealed check stops; Moen hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).

    Supplied with 2" brass drain.

    Shower curtain optional.

    Curtain Size: 45" x 75".

    Standard Color: White.

    Special order colors available.

    Florestone Model 3PC-40-40H Barrier-Free Shower

    2851 Falcon Drive Madera, CA 93637

    T. 559.661.4171 T. 800.446.8827

    F. 559.661.2070 florestone.com

    3P

    C-4

    0-4

    0H

    A

    DA

    Com

    pli

    an

    t

    18" above inside

    33" to 36" above inside

    "

    77"

    78"

    40"

    20"1"

    1"

    19"

    40"36"

    36"

    1"

    40" x 40" x 78" Weight: 215 lbs.

    Standards:

    I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1

    Specify Right or Left Hand Seat

  • 34-6

    2H

    A

    DA

    Com

    plia

    nt

    Dimensions subject to change without notice.

    Contact Florestone Products to verify

    product specifications.

    ADACOMPLIANT*

    Dimensions may vary " inch. Please check unit before installation.

    For barrier-free installation, contractor shall provide 5/8" minimum recess for curb in sub floor.

    ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons is a Registered Trade Mark of Symmons Industries, Inc.Moen is a Registered Trade Mark of Moen Corporation.

    Architects Specifications

    Furnish and install one-piece gel-coated fiberglass shower stall Model 34-62H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons pressure balance mixing valve with concealed check stops; Moen

    hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel wrap-around grab bar; stainless steel recessed soap dish.

    Supplied with 2" brass drain.

    Shower curtain optional.

    Curtain Size: 72" x 78".

    Standard Color: White.

    Special order colors available.

    Florestone Model 34-62H Barrier-Free Shower

    2851 Falcon Drive Madera, CA 93637

    T. 559.661.4171 T. 800.446.8827

    F. 559.661.2070 florestone.com

    O.D. = 62" x 34" x 80" I.D. = 60" x 31" x 79" Weight: 255 lbs.

    33"to

    36"*

    "

    79"

    32"

    31"

    30"

    60"62"

    13"34"

    80"

    ControlArea

    " Nailing Flange

    Standards:

    I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1

  • Dimensions subject to change without notice.

    Contact Florestone Products to verify

    product specifications.

    ADACOMPLIANT*

    Dimensions may vary " inch. Please check unit before installation.

    For barrier-free installation, contractor shall provide 5/8" minimum recess for curb in sub floor.

    ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons is a Registered Trade Mark of Symmons Industries, Inc.Moen is a Registered Trade Mark of Moen Corporation.

    Architects Specifications

    Florestone Model 3PC-34-62H Barrier-Free Shower

    2851 Falcon Drive Madera, CA 93637

    T. 559.661.4171 T. 800.446.8827

    F. 559.661.2070 florestone.com

    3P

    C-3

    4-6

    2H

    A

    DA

    Com

    pli

    an

    t

    Furnish and install three-piece gel-coated fiberglass shower stall Model 3PC-34-62H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons pressure balance mixing valve with concealed check stops; Moen

    hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel wrap-around grab bar; stainless steel recessed soap dish.

    Supplied with 2" brass drain.

    Shower curtain optional.

    Curtain Size: 72" x 78".

    Standard Color: White.

    Special order colors available.

    O.D. = 62" x 34" x 80"I.D. = 60" x 31" x 79" Weight: 255 lbs.

    33"to

    36"*

    "

    79"

    32"

    31"

    30"

    21"

    60"62"

    13"34"

    80"

    ControlArea

    " Nailing Flange

    Standards:

    I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1

  • 35-6

    2H

    A

    DA

    Com

    plia

    nt / C

    A A

    DA

    Com

    plia

    nt

    Dimensions subject to change without notice.

    Contact Florestone Products to verify

    product specifications.

    ADACOMPLIANT*

    CALIFORNIAADACOMPLIANT*

    Note: Units sold in CA

    DO NOT come with a slide bar.

    Instead a stationary wall hook

    will be installed per CA-ADA

    requirements (2008).

    Dimensions may vary " inch. Please check unit before installation.

    For barrier-free installation, contractor shall provide 5/8" minimum recess for curb in sub floor.

    ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons is a Registered Trade Mark of Symmons Industries, Inc.Moen is a Registered Trade Mark of Moen Corporation.

    Architects Specifications

    Furnish and install one-piece gel-coated fiberglass shower stall Model 35-62H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2 and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons pressure balance mixing valve with concealed check stops; Moen

    hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).

    Supplied with 2" brass drain.

    Shower curtain optional.

    Curtain Size: 72" x 78".

    Standard Color: White.

    Special order colors available.

    Florestone Model 35-62H Barrier-Free Shower

    2851 Falcon Drive Madera, CA 93637

    T. 559.661.4171 T. 800.446.8827

    F. 559.661.2070 florestone.com

    O.D. = 62" x 34" x 80"I.D. = 60" x 31" x 79" Weight: 280 lbs.

    Standards:

    I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1CA-TITLE-24

    32"

    31"

    1" Flange

    60"

    62"

    13"33"

    33"to

    36"*

    79"

    "

    30"

    18"*

    80"

    ControlArea

    Specify Right or Left Hand Seat

  • Dimensions subject to change without notice.

    Contact Florestone Products to verify

    product specifications.

    Dimensions may vary " inch. Please check unit before installation.

    For barrier-free installation, contractor shall provide 5/8" minimum recess for curb in sub floor.

    ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons is a Registered Trade Mark of Symmons Industries, Inc.Moen is a Registered Trade Mark of Moen Corporation.

    Architects Specifications

    Florestone Model 3PC-35-62H Barrier-Free Shower

    2851 Falcon Drive Madera, CA 93637

    T. 559.661.4171 T. 800.446.8827

    F. 559.661.2070 florestone.com

    3P

    C-3

    5-6

    3H

    A

    DA

    Com

    pli

    an

    t /

    CA

    AD

    A C

    om

    pli

    an

    t

    Furnish and install three-piece gel-coated fiberglass shower stall Model 3PC-35-62H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2 and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons pressure balance mixing valve with concealed check stops; Moen hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).

    Supplied with 2" brass drain.

    Shower curtain optional.

    Curtain Size: 72" x 78".

    Standard Color: White.

    Special order colors available.

    Standards:

    I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1CA-TITLE-24

    O.D. = 62" x 34" x 80"

    I.D. = 60" x 31" x 79" Weight: 290 lbs.

    ADACOMPLIANT*

    CALIFORNIAADACOMPLIANT*

    Note: Units sold in CA

    DO NOT come with a slide bar.

    Instead a stationary wall hook

    will be installed per CA-ADA

    requirements (2008).

    32"

    31"

    1" Flange

    60"

    62"

    13"34"

    33"to

    36"*

    79"

    "

    30"

    18"*

    80"

    ControlArea

    21"

    Specify Right or Left Hand Seat

  • 39-6

    2H

    A

    DA

    Com

    plia

    nt

    Dimensions subject to change without notice.

    Contact Florestone Products to verify

    product specifications.

    ADACOMPLIANT*

    Dimensions may vary " inch. Please check unit before installation.

    For barrier-free installation, contractor shall provide 5/8 " minimum recess for curb in sub floor.

    ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons is a Registered Trade Mark of Symmons Industries, Inc.Moen is a Registered Trade Mark of Moen Corporation.

    Architects Specifications

    Furnish and install one-piece gel-coated fiberglass shower stall Model 39-62H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons pressure balance mixing valve with concealed check stops; Moen hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel wrap-around grab bar; stainless steel recessed soap dish.

    Supplied with 2" brass drain.

    Shower curtain optional.

    Curtain Size: 72" x 72".

    Standard Color: White.

    Special order colors available.

    Florestone Model 39-62H Barrier-Free Shower

    2851 Falcon Drive Madera, CA 93637

    T. 559.661.4171 T. 800.446.8827

    F. 559.661.2070 florestone.com

    O.D. = 62" x 39" x 77"I.D. = 60" x 37" x 76"Weight: 285 lbs.

    Standards:

    I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1

    33"to

    36"*

    "

    76"

    38"

    31"

    36"

    60"62"

    17"39"

    77"

    ControlArea

    " Nailing Flange

  • Dimensions subject to change without notice.

    Contact Florestone Products to verify

    product specifications.

    ADACOMPLIANT*

    Dimensions may vary " inch. Please check unit before installation.

    For barrier-free installation, contractor shall provide 1" minimum recess for curb in sub floor.

    ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons is a Registered Trade Mark of Symmons Industries, Inc.Moen is a Registered Trade Mark of Moen Corporation.

    Architects Specifications

    FlorestoneModel 39-62H Tile BackBarrier-Free Shower

    2851 Falcon Drive Madera, CA 93637

    T. 559.661.4171 T. 800.446.8827

    F. 559.661.2070 florestone.com

    39-6

    2H

    TB

    A

    DA

    Com

    pli

    an

    t

    Furnish and install one-piece gel-coated fiberglass shower stall Model 39-62H TB designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons pressure balance mixing valve with concealed check stops; Moen hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel wrap-around grab bar; stainless steel recessed soap dish.

    Supplied with 2" brass drain.

    Shower curtain optional.

    Curtain Size: 72" x 72".

    Standard Color: White.

    Special order colors available.

    O.D. = 62" x 39" x 78" I.D. = 60" x 37" x 75" Weight: 285 lbs.

    Standards:

    I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1

    33"to

    36"*

    2"

    77"

    38"

    31"

    36"

    60"62"

    17"39"

    78"

    ControlArea

    " Nailing Flange

  • 3P

    C-3

    9-6

    2H

    A

    DA

    Com

    plia

    nt

    Dimensions subject to change without notice.

    Contact Florestone Products to verify

    product specifications.

    ADACOMPLIANT*

    Dimensions may vary " inch. Please check unit before installation.

    For barrier-free installation, contractor shall provide 5/8" minimum recess for curb in sub floor.

    ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons is a Registered Trade Mark of Symmons Industries, Inc.Moen is a Registered Trade Mark of Moen Corporation.

    Architects Specifications

    Furnish and install three-piece gel-coated fiberglass shower stall Model 3PC-39-62H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2 and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons pressure balance mixing valve with concealed check stops; Moen hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel wrap-around grab bar; stainless steel recessed soap dish.

    Supplied with 2" brass drain.

    Shower curtain optional.

    Curtain Size: 72" x 72".

    Standard Color: White.

    Special order colors available.

    Florestone Model 3PC-39-62H Barrier-Free Shower

    2851 Falcon Drive Madera, CA 93637

    T. 559.661.4171 T. 800.446.8827

    F. 559.661.2070 florestone.com

    O.D. = 62" x 39" x 77"I.D. = 60" x 37" x 76"Weight: 295 lbs.

    Standards:

    I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1

    33"to

    36"*

    "

    76"

    38"

    31"

    36"

    60"62"

    17"39"

    77"

    ControlArea

    " Nailing Flange

    21"

  • Dimensions subject to change without notice.

    Contact Florestone Products to verify

    product specifications.

    Dimensions may vary " inch. Please check unit before installation.

    For barrier-free installation, contractor shall provide 1" minimum recess for curb in sub floor.

    ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons is a Registered Trade Mark of Symmons Industries, Inc.Moen is a Registered Trade Mark of Moen Corporation.

    Architects Specifications

    FlorestoneModel 40-62H Tile BackBarrier-Free Shower

    2851 Falcon Drive Madera, CA 93637

    T. 559.661.4171 T. 800.446.8827

    F. 559.661.2070 florestone.com

    40-6

    2H

    TB

    C

    A A

    DA

    Com

    pli

    an

    t /

    CA

    AD

    A C

    om

    pli

    an

    t

    Furnish and install one-piece gel-coated fiberglass shower stall Model 40-62H TB designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2 and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons pressure balance mixing valve with concealed check stops; Moen

    hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel wrap-around grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).

    Supplied with 2" brass drain.

    Shower curtain optional.

    Curtain Size: 72" x 72".

    Standard Color: White.

    Special order colors available.

    Standards:

    I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1CA-TITLE-24

    O.D. = 62" x 39" x 78"

    I.D. = 60" x 37" x 75" Weight: 310 lbs.

    ADACOMPLIANT*

    CALIFORNIAADACOMPLIANT*

    Note: Units sold in CA

    DO NOT come with a slide bar.

    Instead a stationary wall hook

    will be installed per CA-ADA

    requirements (2008).

    ControlArea

    38"

    31"

    1" Flange

    60"

    62"

    17"39"

    33"to

    36"*

    77"

    2"

    36"

    18"*

    78"

    Specify Right or Left Hand Seat

  • 40-6

    2H

    A

    DA

    Com

    plia

    nt / C

    A A

    DA

    Com

    plia

    nt

    Dimensions subject to change without notice.

    Contact Florestone Products to verify

    product specifications.

    ADACOMPLIANT*

    CALIFORNIAADACOMPLIANT*

    Note: Units sold in CA

    DO NOT come with a slide bar.

    Instead a stationary wall hook

    will be installed per CA-ADA

    requirements (2008).

    Dimensions may vary " inch. Please check unit before installation.

    For barrier-free installation, contractor shall provide 5/8" minimum recess for curb in sub floor.

    ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons is a Registered Trade Mark of Symmons Industries, Inc.Moen is a Registered Trade Mark of Moen Corporation.

    Architects Specifications

    Furnish and install one-piece gel-coated fiberglass shower stall Model 40-62H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2 and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons pressure balance mixing valve with concealed check stops; Moen

    hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel wrap-around grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).

    Supplied with 2" brass drain.

    Shower curtain optional.

    Curtain Size: 72" x 72".

    Standard Color: White.

    Special order colors available.

    Florestone Model 40-62H Barrier-Free Shower

    2851 Falcon Drive Madera, CA 93637

    T. 559.661.4171 T. 800.446.8827

    F. 559.661.2070 florestone.com

    O.D. = 62" x 39" x 77"I.D. = 60" x 37" x 76" Weight: 310 lbs.

    Standards:

    I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1CA-TITLE-24

    38"

    31"

    1" Flange

    60"

    62"

    17"39"

    33"to

    36"*

    76"

    "

    36"

    18"*

    77"

    ControlArea

    Specify Right or Left Hand Seat

  • Dimensions subject to change without notice.

    Contact Florestone Products to verify

    product specifications.

    ADACOMPLIANT*

    Dimensions may vary " inch. Please check unit before installation.

    For barrier-free installation, contractor shall provide 5/8" minimum recess for curb in sub floor.

    ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons is a Registered Trade Mark of Symmons Industries, Inc.Moen is a Registered Trade Mark of Moen Corporation.

    Architects Specifications

    Florestone Model 3PC-40-62H Barrier-Free Shower

    2851 Falcon Drive Madera, CA 93637

    T. 559.661.4171 T. 800.446.8827

    F. 559.661.2070 florestone.com

    3 P

    C-4

    0-6

    2H

    A

    DA

    Com

    pli

    an

    t /

    CA

    AD

    A C

    om

    pli

    an

    t

    Furnish and install three-piece gel-coated fiberglass shower stall Model 3PC-40-62H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2 and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons pressure balance mixing valve with concealed check stops; Moen hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).

    Supplied with 2" brass drain.

    Shower curtain optional.

    Curtain Size: 72" x 72".

    Standard Color: White.

    Special order colors available.

    O.D. = 62" x 39" x 77"

    I.D. = 60" x 37" x 76" Weight: 320 lbs.

    Standards:

    I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1CA-TITLE-24

    ADACOMPLIANT*

    CALIFORNIAADACOMPLIANT*

    Note: Units sold in CA

    DO NOT come with a slide bar.

    Instead a stationary wall hook

    will be installed per CA-ADA

    requirements (2008).

    38"

    31"

    1" Flange

    60"

    62"

    17"39"

    33"to

    36"*

    76"

    "

    36"

    18"*

    77"

    ControlArea

    21"

    Specify Right or Left Hand Seat

  • 60-3

    1H

    TS

    A

    DA

    Com

    plia

    nt / C

    A A

    DA

    Com

    plia

    nt

    Dimensions subject to change without notice.

    Contact Florestone Products to verify

    product specifications.

    ADACOMPLIANT*

    CALIFORNIAADACOMPLIANT*

    Note: Units sold in CA

    DO NOT come with a slide bar.

    Instead a stationary wall hook

    will be installed per CA-ADA

    requirements (2008).

    Dimensions may vary " inch. Please check unit before installation.

    Symmons is a Registered Trade Mark of Symmons Industries, Inc.Moen is a Registered Trade Mark of Moen Corporation.

    Architects Specifications

    Furnish and install one-piece gel-coated fiberglass shower stall Model 60-31HTS designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2 and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons pressure balance mixing valve with concealed check stops; Moen hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel grab bars; 3 each 24", 2 each 18"; molded corner soap dish; folding seat.

    Shower curtain optional.

    Curtain Size: 72" x 72".

    Standard Color: White.

    Special order colors available.

    Florestone Model 60-31HTS Tub/Shower

    2851 Falcon Drive Madera, CA 93637

    T. 559.661.4171 T. 800.446.8827

    F. 559.661.2070 florestone.com

    Standards:

    I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1CA-TITLE-24

    59" x 32" x 80" Weight: 200 lbs.

    31"

    6"

    15"

    56"59"

    32"

    33"to

    36"*

    79"

    13"

    80"

    14"

    Specify Right or Left Hand Drain

  • Dimensions subject to change without notice.

    Contact Florestone Products to verify

    product specifications.

    ADACOMPLIANT*

    Dimensions may vary " inch. Please check unit before installation.

    Symmons is a Registered Trade Mark of Symmons Industries, Inc.Moen is a Registered Trade Mark of Moen Corporation.

    Architects Specifications

    FlorestoneModel 60-31HTS Tile BackTub/Shower

    2851 Falcon Drive Madera, CA 93637

    T. 559.661.4171 T. 800.446.8827

    F. 559.661.2070 florestone.com

    60-3

    1 H

    TS

    TB

    A

    DA

    Com

    pli

    an

    t /

    CA

    AD

    A C

    om

    pli

    an

    t

    Furnish and install one-piece gel-coated fiberglass shower stall Model 60-31 HTS TB as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2 and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons pressure balance mixing valve with concealed check stops; Moen hand-held shower head with hose and mounting bracket; stainless steel grab bars; 3 each 24", 2 each 18"; molded corner soap dish; folding seat.

    Shower curtain optional

    Curtain Size: 72" x 72"

    Standard Color: White

    Special order colors available

    59" x 32" x 80"Weight: 200 lbs.

    Standards:

    I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1CA-TITLE-24

    ADACOMPLIANT*

    CALIFORNIAADACOMPLIANT*

    Note: Units sold in CA

    DO NOT come with a slide bar.

    Instead a stationary wall hook

    will be installed per CA-ADA

    requirements (2008).

    31"

    6"

    15"

    56"59"

    32"

    33"to

    36"*

    79"

    13"

    80"

    14"

    Specify Right or Left Hand Drain

  • 3P

    C-6

    0-3

    1H

    TS

    A

    DA

    Com

    plia

    nt / C

    A A

    DA

    Com

    plia

    nt

    Dimensions subject to change without notice.

    Contact Florestone Products to verify

    product specifications.

    ADACOMPLIANT*

    CALIFORNIAADACOMPLIANT*

    Note: Units sold in CA

    DO NOT come with a slide bar.

    Instead a stationary wall hook

    will be installed per CA-ADA

    requirements (2008).

    Dimensions may vary " inch. Please check unit before installation.

    Symmons is a Registered Trade Mark of Symmons Industries, Inc.Moen is a Registered Trade Mark of Moen Corporation.

    Architects Specifications

    Furnish and install one-piece gel-coated fiberglass shower stall Model 3PC-60-31HTS designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2 and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons pressure balance mixing valve with concealed check stops; Moen hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel grab bars; 3 each 24", 2 each 18"; molded corner soap dish; folding seat.

    Shower curtain optional.

    Curtain Size: 72" x 72".

    Standard Color: White.

    Special order colors available.

    Florestone Model 3PC-60-31HTS Tub/Shower

    2851 Falcon Drive Madera, CA 93637

    T. 559.661.4171 T. 800.446.8827

    F. 559.661.2070 florestone.com

    Standards:

    I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1

    59" x 32" x 80" Weight: 200 lbs.

    31"

    6"

    15"

    56"59"

    32"

    33"to

    36"*

    79"

    13"23"

    80"

    14"

    Specify Right or Left Hand Seat

  • Dimensions subject to change without notice.Contact Florestone Products to verify product specifications.

    For barrier-free installation, contractor shall provide 1" minimum recess for curb in sub floor.

    Architects Specifications

    Florestone Model 400 Barrier-Free Terrazzo-Shower Receptor

    2851 Falcon Drive Madera, CA 93637

    T. 559.661.4171 T. 800.446.8827

    F. 559.661.2070 florestone.com

    Mod

    els

    400 B

    arr

    ier-

    Fre

    e R

    ece

    pto

    r

    Furnish and install wheelchair accessible Terrazzo Shower Receptor Model 400 as manufactured by Florestone Products Company. Flanges on three sides, cast integral, shall be of galvanized - bonderized steel and shall extend not less than 1" above the shoulders. Shoulders on three sides shall be not less than 2" inside. Threshold shall be not more than " above receptor floor to allow for barrier free entrance. Drain body shall be brass, cast integral, and shall provide for a non-caulked connection not less than one inch deep to a 2" pipe. Removable type stainless steel strainer plate shall be supplied. Receptor shall be manufactured of tan and white marble chips cast in white Portland cement to produce a compressive strength of not less than 3,000 PSI, seven days after casting. Terrazzo surface shall be ground, polished, and the entire unit sealed to resist stains and moisture. Receptors reinforced with 16-gauge wire.

    OptionsOffset drain. Additional flanges. (Drawings required)

    Note: Terrazzo is not designed to be used with anything that is over 130 degrees Fahrenheit.

    Model 400Barrier free, center drain Terrazzo Shower Receptors with reduced threshold height.

    Some Models Conform to ADA REQUIREMENTS*

    A* B C D E WT.

    36" 36" 18" 18" 18" 315

    40" 38" 20" 20" 19" 370

    42" 42" 21" 21" 21" 381

    42" 36" 21" 21" 18" 365

    48" 36" 24" 24" 18" 445

    48" 48" 24" 24" 24" 550

    60" 32" 30" 30" 16" 435

    60" 36" 30" 30" 18" 500

    63" 33" 31" 31" 16" 500

    * Width of threshold (other sizes available upon request) Conforms to ADA Requirements

    AC D

    E

    B

    2"

    4"

    1"

    3"

    2"

  • Dimensions subject to change without notice.

    Contact Florestone Products to verify

    product specifications.

    ADACOMPLIANT*

    Dimensions may vary " inch. Please check unit before installation.

    For barrier-free installation, contractor shall provide 1/2" minimum recess for curb in sub floor.

    ADA compliance when accessories installed by manufacturer.

    Architects Specifications

    Florestone Model 4040F Barrier-Free Molded Fiberglass Shower Receptor

    2851 Falcon Drive Madera, CA 93637

    T. 559.661.4171 T. 800.446.8827

    F. 559.661.2070 florestone.com

    4040F-B

    F

    AD

    A C

    om

    pli

    an

    t

    Furnish and install one piece shower unit Model 4040F-BF as manufactured by Florestone Products Company. Unit to be manufactured of gel-coated fiberglass and to be supplied with slip-resistant floor laminated for extra rigidity. Color will be white (unless otherwise specified). Unit to be supplied with a 2" BNC brass non-caulk drain.

    Standard Color: White

    Optional Colors: Color matching for most major manufacturers colors is available.

    Standards:

    I.A.P.M.O. File No. 0687ANSI Z-124.2 HUD/FHA National Specifications UN-73CSA TEST Warnock Hersey Listed: CAN/CSA-B45.0-CAN/USA-B45.5

    ADACOMPLIANT*

    UPC MARKINGGlue-on Label

    2"3"

    40"

    40"

    20"

    OD

    Manufacturers Name and Model Number Glue-on Label

    Slope to Drain"to 1'

    2"40"

    20"3"4 "1"

    20"

    One piece, single threshold model for recessed installation. Features 1" flange on three remaining sides.

    04050607080910111213141516171819

Recommended

View more >