3.2.4_hit-re500-sd_p91_128r30
DESCRIPTION
Hikti ProductsTRANSCRIPT
Hilti, Inc. 5400 South 122nd East Avenue
Tulsa, OK 74146
1-800-879-8000 www.hilti.com
Attached are page(s) from the 2011 Hilti North American Product Technical Guide. For complete details on this product, including data development, product specifications, general suitability, installation, corrosion, and spacing & edge distance guidelines, please refer to the Technical Guide, or contact Hilti.
/
/
/
// /
/
////
/ /
τ
( )
τ
( )[ ]
τ
( )[ ]ττ
τ τ
τ
τ
τ
τ
τ τ
( )
τ
τ τ τ
τ
τ
τ
τ
Adhesive Anchoring Systems
HIT-RE 500-SD Epoxy Adhesive Anchoring System 3.2.4
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I Anchor Fastening Technical Guide 2011 101
Table 10 — Bond Strength Design Information for Fractional Threaded Rod in Holes Drilled with a Core Drill1,4
Design Information Symbol UnitsNominal Rod Diameter (in.)
3/8 1/2 5/8 3/4 7/8 1 1-1/4
Tem
pera
ture
ra
nge
A3
Characteristic bond strength and minimum anchor embedment in un-cracked concrete
τk,uncr
psi 1,740 1,703 1,553 1,441 1,356 1,282 1,169
(N/mm2) (12.0) (11.7) (10.7) (9.9) (9.4) (8.8) (8.1)
hef,min
in. 2.43 2.81 3.14 3.44 3.71 4.0 5.0
(mm) (62) (71) (80) (87) (94) (102) (127)
Tem
pera
ture
ra
nge
B3
Characteristic bond strength and minimum anchor embedment in un-cracked concrete2
τk,uncr
psi 601 588 536 497 468 442 404
(N/mm2) (4.1) (4.1) (3.7) (3.4) (3.2) (3.1) (2.8)
hef,min
in. 1.57 2.0 2.5 3.0 3.5 4.0 5.0
(mm) (40) (51) (64) (76) (89) (102) (127)
Perm
issi
ble
inst
alla
tion
cond
ition
s Dry concrete Фd – 0.65 0.65 0.55 0.55 0.55 0.45 0.45
Water-saturated concreteФws – 0.55 0.55 0.45 0.45 0.45 0.45 0.45
kws – 1.00 1.00 1.00 1.00 1.00 0.95 0.88
For SI: 1 inch = 25.4 mm, 1 lbf = 4.448 N, 1 psi = 0.006897 MPaFor pound-inch units: 1 mm = 0.03937 inches, 1 N = 0.2248 lbf, 1 MPa = 145.0 psi1 Bondstrengthvaluescorrespondtoconcretecompressivestrengthrange2,500psi≤ƒ'c≤4,500psi.For4,500psi≤ƒ'c≤6,500psi,tabulatedcharacteristicbondstrengthmaybeincreasedby6%.For6,500psi≤ƒ'c≤8,000psi,tabulatedcharacteristicbondmaybeincreased by 10%.
2 Characteristic bond strengths are for sustained loads including dead and live loads. For short-term loads including wind and seismic, bond strengths may be increased 40%.
3 Temperature range A: Max. short term temperature = 110°F (43°C), max. long term temperature = 80°F (26°C). Temperature range B: Max. short term temperature = 162°F (72°C), max. long term temperature = 110°F (43°C). Short term elevated concrete temperatures are those that occur over brief intervals, e.g., as a result of diurnal cycling. Long term concrete
temperatures are roughly constant over significant periods of time.4 Bond strength values applicable to SDC A and B only.
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
τ
c
c
τ
τ
τ
τ
c
τ
τ
c
Adhesive Anchoring Systems
3.2.4 HIT-RE 500-SD Epoxy Adhesive Anchoring System
124 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I Anchor Fastening Technical Guide 2011
3.2.4.5 Installation InstructionsInstallation Instructions For Use (IFU) are included with each product package. They can also be viewed or downloaded on-line at www.us.hilti.com (US) and www.hilti.ca (Canada) -- "Service/Technical Info >> Technical Downloads >> Anchoring Systems". Because of the possibility of changes, always verify that downloaded IFU are current when used. Proper installation is critical to achieve full performance. Training is available on request. Contact Hilti Technical Services for applications and conditions not addressed in the IFU.
Adhesive Anchoring Systems
Notes
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I Anchor Fastening Technical Guide 2011 125
/ //
/
//
//
//
/
//
/
/
/ /
/ /
/ / / /
/ / / /
/ / / /
/ / / /
/ / / /
/ / / /
/ / /
/ / /
/ / / /
/ / / /
/ / / /
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
/
/ / /
/
/
/ / /
/
/
/
/
/
/
/
/
/
/
/
/