30mm 443 awning window - alspec.com.au

February 2020 ISSUE A

Technical Manual

30mm 443 Awning Window

I I30mm 443 AWNING WINDOW | FebruAry 2020 | ISSue A

1300 ALSPEC (1300 257 732) | alspec.com.au

I I I30mm 443 AWNING WINDOW | FebruAry 2020 | ISSue A


COPYRIGHT

This Technical manual remains the property of Aluminium Specialties Group Pty Limited and contains privileged information which is the subject of copyright and the manual or any part thereof may not be reproduced, copied or loaned in any form without the written permission of Aluminium Specialties Group Pty Limited.

This manual is to be returned to Aluminium Specialties Group Pty Limited when requested.

DISCLAIMER

Whilst every effort has been made to ensure the technical details contained within this manual are accurate, Aluminium Specialties Group Pty Limited can take no responsibilities for any loss or damage whatsoever arising as a result of any errors contained in this manual.

Also, interpretation of standards or codes within this manual is Aluminium Specialties Group Pty Limited interpretation for such codes. Responsibility for code compliance remains with the user of this manual. In some cases product dimensions may vary or be changed without notice. The user of this manual should not act or rely upon on any information contained in this manual without first obtaining appropriate professional advice relating to their particular circumstances.

Aluminium Specialties Group Pty Limited disclaims all liability for loss or damage suffered by any party who acts or fails to act in reliance of this manual.

I V30mm 443 AWNING WINDOW | FebruAry 2020 | ISSue A


Contents1. TECHNICAL MANUAL RELEASE NOTES 1.1

2. TECHNICAL SPECIFICATIONS 2.1

5. EXTRUSIONS 5.1

Framing 5.1

Awning Sash Adaptor Selection Chart 5.2

6. HARDWARE & COMPONENTS 6.1

Glazing Wedges 6.1

Backing Gasket 6.1

Channels 6.2

Seals 6.2

Fasteners 6.2

Frame Joint Gaskets 6.3

Accessories 6.3

Silicone 6.5

7. TYPICAL ELEVATION 7.1

8. TYPICAL DETAILS 8.1

443 SG Awning in McArthur Evo Head & Sill Details 8.1

443 DG Awning in ecoFRAMEplus 101.6mm Head & Sill Details 8.3

443 DG ecoFRAMEplus 101.6mm Jamb Detail 8.4

9. CUTTING FORMULAS 9.1

Typical 443 Sash in Single Glazed Center Pocket Frames - 6mm Jamb Clearance 9.1

10. MANUFACTURING DETAILS 10.1

443-A SG Sash Bottom Rail Machining Details 10.1

443-K DG Sash Bottom Rail Machining Details 10.2

443-B SG Sash Top Rail Machining Details 10.3

443-J DG Sash Top Rail Machining Details 10.4

McArthur & McArthur Evo Frame Preparation 10.5

ecoFRAMEplus 101.6mm Frame Preparation 10.6

443-F Winder Adaptor Notch 10.7

ASW43 Awning Winder Machining 10.8

ME33 McArthur Evo Sash Adaptor Chain Winder Notch 10.9

443-E McArthur Sash Adaptor Chain Winder Notch 10.10

V30mm 443 AWNING WINDOW | FebruAry 2020 | ISSue A


11. ASSEMBLY DETAILS 11.1

McArthur Evo Framing & Transom Sealing Detail 11.1

30mm 443 Sash Corner Assembly 11.2

12. GLAZING DETAILS 12.1

Glazing Details 443-A Single Glazed 12.1

Glazing Details 443-K Double Glazed 12.2

13. CARE & MAINTENANCE 13.1

1 . 130mm 443 AWNING WINDOW | FebruAry 2020 | ISSue A


30mm 443Awning Window

1. Technical Manual Release Notes

This page is intended to record all changes to the 30mm 443 AWNING WINDOW technical manual pages.

Changes or additions to this manual will be itemised with a brief description and date when theamendments were made.

It is important that a copy of the page be issued with the update and inserted as the first page in thecustomers technical manual.

ISSUE DATE Amendment Description Refer to Tech Memo #

A 02/2020 Technical Manual Release 362




2. Technical Specifications

ALUMINIUMAluminium frames should be manufactred using Alspec’s 30mm 443 AWNING WINDOW framing system.

ASW Awning Sash - Top HungMaximum Height - 1000mm O/A SashMinimum Height - 290mm O/A Sash

Maximum Width - 1000mm O/A SashMinimum Width - 350mm O/A Sash

Maximum Area - 1.0m2

Maximum Sash Weight - 18kg

HARDWAREThe hardware shall be Alspec’s specific glazing tapes, colour coded wedges and glazing channels for 30mm 443 AWNING WINDOW.- All other hardware as per Alspec Technical Manual

FINISHED- All powder coated material shall be produced to AS3715- All anodised material shall be produced to AS1231

TESTINGProduct shall have a test report to show compliance to AS2047.

All products are available from Alspec (A.B.N. 63 001 252 259) as detailed in the “Alspec” catalogue or on the Internet at www.alspec.com.au. All such framing is to be constructed, assembled and fixed to meet the requirement of AS2047 (windows in buildings), AS1170 (loading code). All glass, glazing rubbers, seals and gaskets shall be applied in accordance with the requirements of AS1288 (glass in buildings - selection and installation).

Fabricators of the 30mm 443 AWNING WINDOW framing system should seek certification by a consultant structural engineer as to the framing being acceptable for the design wind pressure and deflection characteristics required of the site.


1300 ALSPEC (1300 257 732) | alspec.com.au5 . 1


5. Extrusions

Framing

V.S.

VISIBLE SURFACE

VISI

BLE

SURF

ACE

VISI

BLE

SURF

ACE

VISI

BLE

SURF

ACE

VISI

BLE

SURF

ACE

443-CAWNING HINGE

Mass. 0.192 Kg/mAnod. Per. 100Paint Per. 100

443-BHINGE SASH


443-ASASH


443-JHINGE SASH DG


443-KSASH DG


443-HHEAD 443 TOPHUNG AWNING


Ixx = 759.88 x 103 mm4




5. Extrusions

5 . 2

Awning Adaptors

SECTION DESCRIPTION

443-E McARTHUR 101.6mm CENTRE POCKET GLAZED FRAMING

ME33 McARTHUR EVO 101.6mm CENTRE POCKET GLAZED FRAMING

443-L ecoFRAMEplus 101.6mm CENTRE POCKET DOUBLE GLAZED FRAMING

Awning Sash Adaptor Selection Chart

V.S.

VISIBLE SURFACE

V.SVISIBLE SURFACE

VISIBLE SURFACE

443-FAWNING WINDERADAPTOR


443-LSASH ADAPTOR


ME33443 SASHADAPTOR


443-ESASH ADAPTOR


ASW43AWNING WINDERADAPTOR



1300 ALSPEC (1300 257 732) | alspec.com.au6 . 1


6. Hardware & Components

Glazing Wedges

backing Gasket

IMAGETO SUIT GLASS

MATERIAL PART # DESCRIPTION

3mm

PVC 1313055 GR43 GLAZING WEDGE (BROWN) (3mm GAP) PVC x 200m ROLL

S/PRENE 1313063 GR43S GLAZING WEDGE (BROWN) (3mm GAP) S/PRENE x 200m ROLL

5mm

PVC 1313057 GR45 GLAZING WEDGE (BLUE) (5mm GAP) PVC x 150m ROLL

S/PRENE 1313065 GR45S GLAZING WEDGE (BLUE) (5mm GAP) S/PRENE x 150m ROLL

7mm

PVC 1313059 GR47 GLAZING WEDGE (RED) (7mm GAP) PVC x 150m ROLL

S/PRENE 1313062 GR47S GLAZING WEDGE (RED) (7mm GAP) S/PRENE x 150m ROLL

IMAGETO SUIT GAP


2mmPVC 1313079 CE36 CO-EXT BACKING GASKET (2mm GAP) PVC x 100m ROLL

S/PRENE 1313080 CE36S CO-EXT BACKING GASKET (2mm GAP) S/PRENE x 100m ROLL









6 . 2

Fasteners

SCREWS

PART # HEAD DESCRIPTION

1382645 SQUARE 10g x 1 1/4 (32mm) 304SS SQ #2 PAN S/TAP SCREW x 1000

1382643 SQUARE 10g x 1/2 (13mm) 304SS SQ #2 PAN S/TAP SCREW x 1000

1382644 SQUARE 10g x 1 (25mm) 304SS SQ #2 PAN S/TAP SCREW x 1000

1382054 PHILLIPS 10g x 1 (25mm) SS PHIL PAN S/TAP SCREW x 500

1382095 PHILLIPS 10g x 1 (25mm) SS PHILLIPS CSK S/TAP x 200

Seals

IMAGETO SUIT GLASS


6mm PVC 1376130 GR31 GLAZING CHANNEL (6mm GLASS) x 150m ROLL

18mm PVC 1376087 GR53 DG GLAZING CHANNEL (18mm GLASS) x 75m ROLL

Channels

IMAGE PART # MATERIAL DESCRIPTION

1376345 PVC CE5.5 CO-EXT BULB SEAL (5.5mm DIAMETER) x 250m ROLL

1385580

PVC

DOUBLE SIDED GLAZING TAPE 12mm x 1.6mm 61m ROLL

1385549 60403 12mm x 3.2mm DOUBLE SIDED GLAZING TAPE x 30.5m







6 . 3

Frame Joint Gaskets

PART # DESCRIPTION FINISH

1385512 FJG45 FRAME JOINT GASKET PVC FOAM TAPE 45 x 1.6mm 45.7mBLACK (034)

GREY (036)

1385509 FJG50 FRAME JOIN T GASKET PVC FOAM TAPE 50 x 1.6mm 45.7mBLACK (034)

GREY (036)

1385551 FJG001 45mm x 102mm 1010 PER ROLLBLACK (034)

GREY (036)

Accessories

443 CORNER FOR 443-A SASH

PART 1311296

FINISH MILL (001)

QTY EACH

SETTING BLOCK 13 x 15x 75mm BAG OF 50

PART 1376730

FINISH GREY (036)

QTY BAG

SETTING BLOCK 17 x 30 X 75mm BAG OF 50

PART 1376734

FINISH BLACK (034)

QTY BAG

FS11 ALSPEC 11mm FLYSCREEN RETAINER CLIP

PART 1309055

FINISH TRANSPARENT (050)

QTY EACH





6 . 4

Chainwinders & Cam Handles

ALSPEC CAM HANDLE HI-PROFILE SELF LATCH - LOCKABLE

PART 1377863 (RH) 1377862 (LH)

FINISH BLACK (034)

QTY EACH

ALSPEC CAM HANDLE HI-PROFILE SELF LATCH

PART 1377954 (RH) 1377953 (LH)

FINISH BLACK (034)

QTY EACH

WHITCO CHAINWINDER 5 DISC KA BLACK

PART 1302425

FINISH BLACK (034)

QTY EACH

ALSPEC CHAINWINDER S/S LOCKING 300mm LEFT HAND KEY 32304

PART 1338065

FINISH PEARL WHITE GLOSS (010)

SILVER PAINT (031)

BLACK (034)

QTY EACH

WHITCO CHAINWINDER NON LOCKABLE BLACK

PART 1302433

FINISH BLACK (034)

QTY EACH

C

ALUMINIUM SPECIALTIES GROUP PTY LTDALSPEC

ALUMINIUM SYSTEMSSPECIALISTS

Chainwinder - LockingPart # 1338061Finish: ---Qty: Each

230NF (P1559B) Non Fiction 1378945330A (P1561B) 1378810420HDA (P1553B) 1378825Finish: BlackQty: Pair

230 4BC (1090) 1345606230 4BC NF (P1090NF) 1345607430 4BC (P1080) 1345042430 4BC NF (P1080NF) 1345610Finish: 304 Stainless SteelQty: Pair


Part # 1309055Finish: Transparent (050)Qty: 200 pack

FS2C Corner StakePart # 1324001Finish: Black (034)Qty: Each

HE002

C



Chainwinder - LockingPart # 1338061Finish: ---Qty: Each

230NF (P1559B) Non Fiction 1378945330A (P1561B) 1378810420HDA (P1553B) 1378825Finish: BlackQty: Pair

230 4BC (1090) 1345606230 4BC NF (P1090NF) 1345607430 4BC (P1080) 1345042430 4BC NF (P1080NF) 1345610Finish: 304 Stainless SteelQty: Pair


Part # 1309055Finish: Transparent (050)Qty: 200 pack

FS2C Corner StakePart # 1324001Finish: Black (034)Qty: Each

HE002

C



ASW8 Corner Stake (ASW4 and ASW1) Part # 1379018Finish: Mill FinishQty: Each or Bag of 50

ASW88 Corner Stake (ASW44)Part # 1378025Finish: Mill FinishQty: Each

Cam Handle-Non Locking 6mm WedgelessPart # 1378820 (Right Hand) 1378822 (Left Hand)Finish: Mill FinishQty: Each or Bag (50 off)

Cam Handle - Locking 6mm WedgelessPart # 1378824 (Right Hand) 1378823 (Left Hand)Finish: Black (034)Qty: Each

Bristol 16mm BPRESTHD Restrictor StayPart # 1377975Finish: Satin Stainless SteelQty: Each

P1097 130mm Concealed Restrictor StayPart # 1345629Finish: Stainless SteelQty: Each

IMAGE

C









IMAGERESTRICTOR STAYS

CODE DESCRIPTION QTY

1377947 ALSPEC RESTRICTOR STAY SS 13mm LIGHT DUTY PAIR

1377948 ALSPEC RESTRICTOR STAY SS 16mm HEAVY DUTY PAIR

1377949 ALSPEC RESTRICTOR STAY & KEY SS 16mm HEAVY DUTY PAIR

C









IMAGE





6 . 5

ALSPEC 100% NEUTRAL CURE SILICONE

Applications

- General glazing & sealing

- Approx 10 minute skin time

Part # Colours Qty

1385011

Gloss Black (034)

300 ml Cartridge (20 cartridges per carton)

Gloss White (010)

Gloss Grey (036)

Translucent (055)

Matt Black (0G7)

Matt White (0ZY)

Matt Grey (0BC)

Silicone

HIGH PERFORMANCE 100% NEUTRAL CURE SILICONE

Applications

Prosil60 (Gloss) Prosil41LM (Matt)

- General & high performance glazing

- Butt joint glazing

- Approx. 5 minute skin time

Part # Colours Qty

1385002

Gloss Black (034)

300 ml Cartridge (20 cartridges per carton)

Gloss White (010)

Gloss Grey (036)

Translucent (055)

1385005

Matt Black (0G7)

Matt White (0ZY)

Matt Grey (0BC)

SUPASEAL POLYURETHANE SEALANT / ADHESIVE

Applications

- Joint Sealing

- High adhesion to most materials including plastic and masonry

- Approx. 10 minute skin time

Part # Colours Qty

1385022

Gloss Black (034)960g Sausage(20 sausages per carton)Gloss White (010)

Gloss Grey (036)




7. Typical Elevation

2

1

3

O/A SASH WIDTH

O/A

SAS

H H

EIG

HT

AA

F

O/A SASH WIDTH

4

O/A

SAS

H H

EIG

HT




8. Typical Details

443 SG Awning in McArthur evo Head & Sill Details

NOTE: ALL METAL TO METAL JOINTS UNLESS OTHERWISE NOTED ARE TO BE SEALED WATER TIGHT WITH A SMALL JOINT SEALER OR AN APPROVED SILICONE INCLUDE SASH ADAPTORS.

WELD ALL BULB SEAL MITRE JOINTS

ME1

ME33

ASW43

443-H

443-B

443-A

88

35

14.5

OVE

RAL

L FR

AME

HEI

GH

T

GLA

SS H

EIG

HT

= SH

-70

35

OVE

RAL

L SA

SH H

EIG

T (S

H)

6

CE5.5 BULB SEALS1376345

REFER TO PAGE 6.4

ALSPECCHAINWINDER

1376130

GR31 GLAZINGCHANNEL

2

1

NOTE: ALL METAL TO METAL JOINTS UNLESS OTHERWISE NOTED ARE TO BE SEALED WATER TIGHT WITH A SMALL JOINT SEALER OR AN APPROVED SILICONE. INCLUDE SASH ADAPTORS.

WELD ALL BULB SEAL MITRE JOINTS.44

.444

.5

FS2

FS2

REFER SUB SILL TECH MANUALFOR SUB SILL SELECTION

14.7

443 CORNER FOR 443 SASH1311296

8 . 2


8. Typical Details

30mm 443 AWNING WINDOW | FebruAry 2020 | ISSue A


443 SG McArthur evo Jamb & Sidelight Details



3

4

INNER WEDGE

OUTER WEDGE

DAYLIGHT OPENING

O/A FRAME WIDTH (FW)

DAYLIGHT OPENING

OVERALL FRAME WIDTH (FW)

ME33

ME1

ME33

ME1

ME4

NOTE: ALL METAL TO METAL JOINTS AND SASH ADAPTORS ARE TO BE SEALED WATER TIGHT WITH A SMALL JOINT SEALER OR APPROVED SEALANT


FS2

FS11 ALSPEC 11mm FLYSCREEN RETAINER CLIP1309055

NOTE: FS11 SCREEN CLIPS LOCATED 100mmDOWN FROM U/S OF HEAD TO BOTH JAMBS.

FOR SCREEN HEIGHTS AND WIDTHS GREATERTHAN 1.2m ADD ADDITIONAL SCREEN CLIPSEVENLY SPACED TO ENSURE SCREEN CONTACTSTHE JAMBS.

443-A

44.5 SASH WIDTH (SW)

6 35 GLASS WIDTH = SW - 70

8

443-A

44.5 SASH WIDTH (SW)

6 35 GLASS WIDTH = SW - 70

8




8 . 3


8. Typical Details



443 DG Awning in ecoFrAMeplus 101.6mm Head & Sill Details



443-J

12

31

1376087

GR58 DG CHANNEL

443-H

14.5

OVE

RAL

L FR

AME

HEI

GH

T

2

1

NOTE: ALL METAL TO METAL JOINTS UNLESS OTHERWISE NOTED ARE TO BE SEALED WATER TIGHT WITH A SMALL JOINT SEALER OR AN APPROVED SILICONE. INCLUDE SASH ADAPTORS.

WELD ALL BULB SEAL MITRE JOINTS.

REFER SUB SILL TECH MANUALFOR SUB SILL SELECTION

44.4

443-K

ASW43

ECO201

443-L

12

REFER TO PAGE 6.4

ALSPECCHAINWINDER

31

50

GLA

SS H

EIG

HT

= SH

- 62

SASH

HEI

GH

T (S

H)

6



8 . 4


8. Typical Details



443 DG ecoFrAMeplus 101.6mm Jamb Detail



NOTE: ALL METAL TO METAL JOINTS AND SASH ADAPTORS ARE TO BE SEALED WATER TIGHT WITH A SMALL JOINT SEALER OR APPROVED SEALANT


O/A FRAME WIDTH

50

GLASS WIDTH = SW - 62

12

SASH WIDTH (SW)

6 31


443-L

ECO201

443-K





9. Cutting Formulas

PROFILE SECTION NO. DESCRIPTION CUTTING FORMULA QTY

6

6

ME33 Awning Adaptor Daylight Width 2

6

6

443-B Top Hung Awning Sash Daylight Width - 12 1

6

6

443-A Awning Sash Daylight Width - 12 1

6

6

ASW43 Awning Winder Daylight Width 1

6

6

443-A Awning Sash Daylight Height - 20 2

6

6

ME33 Awning Adaptor Daylight Height 2

GLASSHEIGHT Sash Height - 70

1WIDTH Sash Width - 70

Typical 443 Sash in Single Glazed Center Pocket Frames - 6mm Jamb Clearance

DA

yLIG

HT

HeI

GH

T

SASH

HeI

GH

T

DAyLIGHT WIDTH

SASH WIDTH

* Mitre cut

*

*

*

*

*

6

6

FORMULAS BASED OFF STANDARD 6mm GAP BETWEEN THE FRAME AND SASH

1 0 . 130mm 443 AWNING WINDOW | FebruAry 2020 | ISSue A

1300 ALSPEC (1300 257 732) | alspec.com.au1 0 . 1

443-A SG Sash bottom rail Machining Details


10. Manufacturing Details

O/A

SAS

H W

IDTH

FRO

NT

VIEW

TOP

VIEW

4 O

FF Ø

8mm

DR

AIN

AGE

HO

LES

443-A

443-A

443-A

1/4

POIN

TS50

1/4

POIN

TS50

43 R

ef.

43 R

ef.

45°

45°





1 0 . 2

443-K DG Sash bottom rail Machining Details

O/A

SAS

H W

IDTH

FRO

NT

VIEW

TOP

VIEW

4 OFF

8mm

ØDR

AINA

GE H

OLES

443-K

443-K

443-K

1/4

POIN

TS50

1/4

POIN

TS50

43 R

ef.

43 R

ef.

45°

45°





1 0 . 3

443-b SG Sash Top rail Machining Details

FRO

NT

VIEW

443-B

O/A

SAS

H W

IDTH

43 R

ef.

43 R

ef.

O/A

SAS

H T

OP

RAI

L W

IDTH

12.2

512

.25

45°

45°





1 0 . 4

443-J DG Sash Top rail Machining Details

FRO

NT

VIEW

443-J

O/A

SAS

H W

IDTH

43 R

ef.

43 R

ef.

O/A

SAS

H T

OP

RAI

L W

IDTH

12.2

512

.25

45°

45°





1 0 . 5

McArthur & McArthur evo Frame Preparation

ME1

25.6

4040

37

443-H

ME1

12.7

88.9

4 HOLES Ø5mm

Ø10mm HOLE

AS1C

LEN

GTH





1 0 . 6

ecoFrAMeplus 101.6mm Frame Preparation

ECO201

4037

443-H

ECO201

12.7

88.9

4 HOLES Ø5mm

Ø10mm HOLE

LEN

GTH

45.5

22





1 0 . 7

443-F Winder Adaptor Notch

CHAIN CENTRE LINE

50.5

17.51.

5

50.5

266m

m C

HAI

NW

IND

ER H

OLE

CEN

TRES

1.5

1.5

R2

2 OFFØ3.5mm HOLES

FRO

NT

VIEW

443-F

TOP

VIEW

3.8

2 OFFØ3.5mm holes

15

17.5 15

3.8

26

1.5

0.5





1 0 . 8

ASW43 Awning Winder Machining

50.5

17.5

1.5

50.5

266m

m C

HAI

NW

IND

ER H

OLE

CEN

TRES

1.5

1.5

R2

2 OFFØ3.5mm holes

FRO

NT

VIEW

24.5

ASW43

TOP

VIEW

24.5

2 OFFØ3.5mm holes

19

17.5 19

1.5

26

0.5

CHAIN CENTRE LINE





1 0 . 9

Me33 McArthur evo Sash Adaptor Chain Winder Notch

49

ME33

CHAIN CENTRE LINE

4.5

4.5Ref.

1 0 . 1 030mm 443 AWNING WINDOW | FebruAry 2020 | ISSue A




1 0 . 1 0

443-e McArthur Sash Adaptor Chain Winder Notch

49

443-E

CHAIN CENTRE LINE

5

5




11. Assembly Details

McArthur evo Framing & Transom Sealing Detail

McArthurEvo101 + AS443

kmacgregor 2/04/2019Designed by Checked by Approved by Date

1 / 1 Edition Sheet

Date

FRAME JOINT GASKET1385512 Fully Seal around pocket stop. Tool sealant in to ensure total adhesion.

ME1Frame / Jamb

ME25Hollow Transom

ME3Sill Bead

ME33443 Awning Adaptor

443-BHinge Sash

443-ASash

10g x 25mmStainless Steel

Pan Head Screws

Refer to glazing details

MEA002Pocket Drain Block

Insert into the glazing pocket

and place on a bed of sealant.Completely seal the

glazing pocket and tool in for maximum adhesion




11. Assembly Details

C

PAGE: 3.6.ISSUE:DATE: DEC 2018


SASH CORNER ASSEMBLY

AWNING SYSTEMALUMINIUM SYSTEMSSPECIALISTS

AS443 Awning

443 Corner for 443 Sash1311296

10g x 25mmStainless Steel Pan Head Screw

443-ASash

Crimp frame to secure corner stake

30mm 443 Sash Corner Assembly




12. Glazing Details

Glazing Details 443-A Single Glazed

8mm

GLA

SSC

OVE

R

GR31 6mmGLAZING CHANNEL

REFER PAGE 10.1FOR DRAINAGE HOLELOCATIONS

443-A




12. Glazing Details

Glazing Details 443-K Double Glazed

443-K

12m

m G

LASS

CO

VER

GR53 18mm DGCHANNEL(1376087)

REFER PAGE 10.2 FORDRAINAGE HOLE LOCATIONS




13. Care & Maintenance

FRAMING

Your new 30mm 443 Awning Window frames have been manufactured using the highest quality materials available to the Architectural industry. Constructed from Architectural grade aluminium, these products are highly corrosion resistant and exceptionally strong. With a moderate amount of maintenance, the 30mm 443 Awning Window frame will retain it’s good looks and resist the elements for years to come.

The 30mm 443 Awning Window frames are the product of extensive research and development and designed to resist corrosion and rusting, but as with all external elements on the building require some maintenance to keep them looking good and performing well. Depending on how harsh the environment elements are, the maintenance period will vary. Refer to recommended maintenance table below.

Your 30mm 443 Awning Window frames should only ever need to be washed down with a soft bristled brush using warm water and mild detergent. Rinse well with fresh water and remove any detergent residue. Strong detergents and abrasive cleaners should never be used to clean the 30mm 443 Awning Window frames as they may scratch or damage the surface finish.

MAINTENANCE PERIOD TABLE

ENVIRONMENT RECOMMENDED MAXIMUM MAINTENANCE INTERVAL

Mild Six Months

Moderate Three Months

Tropical/Severe One Month

Environmental Definitions:

Mild – Being rural, away from the coast and remote from industry and urban activity.

Moderate – Being mainly urban, inland and away from heavy industry.

Tropical – Being coastal/marine, subject to salt deposition and within 15km of the Eastern coast or 10km of the Western coast of Australia.

SYDNEY BRANCH3 Alspec Placeeastern Creek NSW 2766Phone: 02 9834 9500Fax: 02 9834 [email protected]

NEWCASTLE BRANCH95 Griffiths RoadLambton NSW 2299Phone: 02 4952 9111Fax: 02 4952 [email protected]

PERTH BRANCH30 Holder WayMalaga WA 6090Phone: 08 9209 9100Fax: 08 9209 [email protected]

CAIRNS BRANCH11 Southgate CloseWoree QLD 4868Phone: 07 4037 6666Fax: 07 4037 [email protected]

BRISBANE BRANCH8-22 Jutland StreetLoganlea QLD 4131Phone: 07 3089 4900Fax: 07 3089 [email protected]

ADELAIDE BRANCH1 Pope Courtbeverley SA 5009Phone: 08 8150 6960Fax: 08 8150 [email protected]

TOWNSVILLE BRANCH21 Carroll StreetMount Louisa QLD 4814Phone: 07 3089 4965Fax: 1300 131 [email protected]

MELBOURNE BRANCH26-40 Pound road WestDandenong South VIC 3175Phone: 03 8787 6333Fax: 03 8787 [email protected]

DARWIN BRANCH25 bishop StreetWoolner NT 0820Phone: 08 8941 7300Fax: 08 8941 [email protected]

HEAD OFFICE | 3 Alspec Place eastern Creek NSW 2766Phone: 02 9834 9500 | Fax: 02 9834 9532 | [email protected]

AluSpace by Alspec - Sydney | 235 Commonwealth Street, Surry Hills NSW 2010Phone: 1300 ALuSPACe (1300 258 772) | [email protected]

AluSpace by Alspec - Adelaide | 1 Pope Court, beverley SA 5009Phone: 08 8150 6960 | [email protected]

February 2020

All pictures shown in this catalgoue are for illustration purposes only. Actual product may vary due to product enhancement.

A18

Call 1300 ALSPEC (257 732) | alspec.com.au

30mm 443 awning window - alspec.com.au

Documents