3 phase parameter measurement
TRANSCRIPT
Sai Sree
3 PHASE PARAMETER MEASUREMENT
Product Code : SSID:ELE:097
Corporate Office Contact UsBranch OfficeSai Sree Infra DevelopersPLOT NO: 9, GROUND FLOOR, GRMR COMPLEX,PRASHANTHI NAGAR,KUKATPALLY, HYDERABAD-500072
H.No 48-18-4/3, FIRST FLOOR, NEAR MUNICIPAL PARK.NAGARJUNA NAGAR, VIJAYAWADA,AP-520008
EMAIL: [email protected] TEL : +040-230-743-23, TEL :+91 630 240 4229.
www.saisreeinfra.com
3 PHASE PARAMETER MEASUREMENT
is a high accuracy 3-phase electrical energy measure-ment device. It is designed to measure any 3-phaseelectrical system simulta-neously without using indi-vidual meters. It is a com-pact table top unit, which includessignal processing required to perform Voltage, Cur-rent, Frequency, Active Power, Reactive Power, Apparent Powerand Power Factor Meas-urements. This product is suitable to measure active, reactive, and apparent energy invarious 3-phase configura-tions such as WYE or DELTA services. It is Com-patible with both 3-phase/3-wire and 3-phase/4-wire systems. All the parameters measured are displayed simultane-ously on a single display unit..
Features
• Microcontroller based design for accurate measurement• 240 x 128 Graphical LCD Display to view all the parameters• Simultaneous display of Three Phase electrical parameters• Used with Single Phase / Three Phase Supply
Technical SpecificationsMeasurement Connection Type : Input and OutputInput Voltage Range (Vr, Vy, Vb) : 30–230Vrms AC, Accuracy ±2%Input Voltage Range (Vry, Vyb, Vbr) : 50–450Vrms AC, Accuracy ±2%Input Current Range ( Ir, Iy, Ib) : 0.20–10Amp, Accuracy ±2%Frequency : 45–55Hz, Accuracy ±1HzActive power : 50–5000Watts, Accuracy ±5%Reactive power : 50–5000Watts, Accuracy ±5%Apparent power : 50–5000Watts, Accuracy ±5%Auxiliary Supply : 230V ±10%, 50HzPower Factor : 0.30 to 0.99 both Leadand Lag,Accuracy ±2° Electrical