2rider assembly manual 2007 (1)

2Rider Assembly manual

2RiderAssembly manual

(Picture shown with optional canopy and kid seats)

Canopy

Safety bar

Kid seats

Seats

Handlebar

Grip shifter

Brake

Luggage tray

Rear wheel Front wheel

Suspension PedalRearderaileur

Bumper


2Rider features• 4 seats for 2 riders and 2 passengers.

• 8 speed gears for effortless rides. • Full suspension for max comfort and safety.• Large luggage tray for drinks and luggage. • Roof canopy to keep off sun rays. • Easy to store and easy to maintain.

2


Specification• Chassis Aluminum 7005T6, powder coated.• Suspension All wheels independently suspended.• Geometry Ackermann geometry, center point steering.• Wheels 20”(406) hi-pressure tires, alloy rims and hubs.• Gears Shimano 8 speed gears, 28~82” gear ratio.• Seats Adjustable for riders, fixed for passengers.• Brakes V brakes for front and rear.• Wheel base 1.5M.• Tracks Front 0.92M, rear 0.72M.• Turing radius 2M.• Dimension 2M long, 1M wide, 1.6M height.• Weight Total 60kg including canopy 7kg, kid seat 7kg.• Packing 1.7M x 1.06M x 0.38M• Max load 200kg made up of 2 adults and 2 kids.

3


Step 1: Take out all parts in the box and raise the chassis about 40 cm height for ease of assembly work.

4

1

2

3

45

6

7 8

9

10

11

12

(1) Canopy(2) Luggage tray(3) 2 kid seats(4) Bow assembly(5) Kid seats stay(6) Kid seat safety bar(7) Right side seat(8) Left side seat(9) Bumper(10) 2 front wheels(11) 2 rear wheels(12) Parts box


5

Step 2:Insert the handlebar stem to the steerer, tighten the clamp and the setting screw.


6

Step 3:Connect the left steering link rod.


7

Step 4:Assemble the pedals to crank arms at both sides.*This step will not affect any other sub-assembly, you can decide do it now or later.

*Note: Always screw the “R” pedals on the chainwheel side clockwise and the “L” pedals on the crank side counterclockwise. Make sure they are tightened.


8

Step 5:Assemble the bow and front bumper to the chassis.


9

Step 6:Assemble the front wheels to the front axle and hook the front V brake cable.*Tools needed:10mm Allen key wrench, 19mm open wrench.


10

Step 7:Assemble the rear wheels to the rear dropouts and hook the rear V brake cable.


11

Step 8:Assemble the luggage tray.


12

Step 9:Assemble the seats, and insert the grip shifter on the right seat handlebar.


13

Step 10:Assemble the kit seat to the kit seat stays, and assemble the kit seat subassembly to the main chassis. Insert the safety bar.


14

Step 11:Assemble the canopy.


15

Step 12:Align the handlebar and front wheels, adjust the derailleurs and brakes, and check all bolts and nuts are tight. Note: If you remove the canopy, 2Rider can stand up to save storage space.

2rider assembly manual 2007 (1)

Documents