2g bts usb commssioning guide v2.0
TRANSCRIPT
-
8/12/2019 2G BTS USB Commssioning Guide V2.0
1/14
www.huawei.com
Copyright 2009 Huawei Technologies Co., Ltd. All rights reserved.
GBTS Software Installationvia USB
for VHA Project
-
8/12/2019 2G BTS USB Commssioning Guide V2.0
2/14
Procedure
The BTS automatically downloads thesoftware version(version.csp) and data
configuration file (TranCfg.INI), and activates the
software.
After the activation, the BTS resets.
Wait until the BTS reset is complete.
For details on the status of the LED on the USB disk
and the status of the RUN LED on the GTMU in thisprocess, see step 3
-
8/12/2019 2G BTS USB Commssioning Guide V2.0
3/14
1. Obtain the BTS Software
Obtain from Huawei regional Technical Leader.
Or call RIC engineer for help.
-
8/12/2019 2G BTS USB Commssioning Guide V2.0
4/14
2. Decompress the Software Package
Decompress the software package to obtain
the software package for the USB.
-
8/12/2019 2G BTS USB Commssioning Guide V2.0
5/14
3. Store the Precfg.ini & Software into USB
Note: the directory as:
1. \\BTS3900 GSM\V100R012C00SP42.csp
2. \\BTS3900 GSM\Precfg.ini
3. \\BTS3900 GSM\SITENAME\TranCfg.INI
Make sure the directory of the Software and data
configure is correct.
-
8/12/2019 2G BTS USB Commssioning Guide V2.0
6/14
5. Plug in the USB
Pre-caution: Before Plug in the USB:1. All boards and components need to be powered up;2. Disconnect the E1 cable from GTMU.
-
8/12/2019 2G BTS USB Commssioning Guide V2.0
7/14
6. Check the Status of LED
1. The USB dongle shall blinking for 2-3 sec.2. The USB dongle shall have LED ON for 3 minutes.
3. The USB dongle shall have LED blinking for 10 minutes,
indicating the data and software loading.(if just date
loading, 8-10 sec)
4. The site shall reset by itself.(If the site is not reset
automatically, plz remove the USB dongle and manually
reset the BBU by clicking the RESET button (not power
off)).
5. After site automatically reset succeed, connect E1 toGTMU, and the USB dongle LED indicator shall keep ON.
Then remove the USB dongle.
Note: If the process is not followed or not appearingcorrect phenomena, plz contact RIC engineer.
-
8/12/2019 2G BTS USB Commssioning Guide V2.0
8/14
7. Verify Software Version by SMT
7.1 Prepare
Set you PC IP to 192.168.0.77/255.255.255.0
Connect the Ethernet port of the PC to the ETH port of GTMUboard by FE cable
-
8/12/2019 2G BTS USB Commssioning Guide V2.0
9/14
Start the SMT, Setting communication port parameters
7.2 Connect the SMT PC to the BTS for Local
Maintenance.
Log in to the SMT.
-
8/12/2019 2G BTS USB Commssioning Guide V2.0
10/14
Click Board in the navigation tree, and then double-click
Board Management in the Function pane on the right
7.3 Checking the Software Versions of theBTS Boards
-
8/12/2019 2G BTS USB Commssioning Guide V2.0
11/14
Query and record the GTMU software version.
In the displayed Board Managementwindow, right-click the GTMUand then
choose Board Informationfrom the shortcut menu.
The Board Informationdialog box is displayed
-
8/12/2019 2G BTS USB Commssioning Guide V2.0
12/14
Query and record the TRX software version
In the displayed Board Managementwindow, double-click the GTMU.
In the displayed Topology Managementwindow, right-click the RRU/RFUconcerned, then choose Board Informationfrom the shortcut menu
The Board Informationdialog box is displayed
-
8/12/2019 2G BTS USB Commssioning Guide V2.0
13/14
8. FAQ
In case of USB upgrade failure and need to
reset BBU, use the Reset button of GTMU for
BTS reset instead of power switch reset.
-
8/12/2019 2G BTS USB Commssioning Guide V2.0
14/14