2d drawings in proe
TRANSCRIPT
Ken Youssefi ME Dept., SJSU 1
Drafting (2D drawing) in Pro/EFrom File pull-down menu, select New and then pick Drawing option
Next, you are asked to select a template and a drawing size.
Ken Youssefi ME Dept., SJSU 2
2D drawing in Pro/E – Template Selection
Use template option
Empty with Format optionEmpty option
Ken Youssefi ME Dept., SJSU 3
2D drawing in Pro/E – Drawing Size
Select size A (8.5 x 11) and Landscape.
Ken Youssefi ME Dept., SJSU 4
2D drawing in Pro/E – Adding Orthographic Views
Insert a drawing view of the active model
Lock or unlock movement of the drawing view.
Open Show/Erase dialog box for dimensioning.
Create individual dimensions
Ken Youssefi ME Dept., SJSU 5
2D drawing in Pro/E – Adding Orthographic ViewsSelect Create a General View (adding views), and click at a location where you want to place the 3D view.
Ken Youssefi ME Dept., SJSU 6
Select View Type and choose Front from Model view names
2D drawing in Pro/E – Adding Orthographic Views
Ken Youssefi ME Dept., SJSU 7
2D drawing in Pro/E – Adding Orthographic Views
Select View Display and choose the Hidden option to show hidden lines
Ken Youssefi ME Dept., SJSU 8
2D drawing in Pro/E – Adding Orthographic ViewsTo place the right side and Top views, select the front view and right click. Choose Insert Projection View and click at the top and right side.
Ken Youssefi ME Dept., SJSU 9
2D drawing in Pro/E – Adding Feature Dimensions
Open Show/Erase dialog box for dimensioning.
Select the Hole as a feature
to dimension
Select to insert
center lines