26lc2r service manual

Upload: marcio-ferreira

Post on 17-Oct-2015

60 views

Category:

Documents


1 download

TRANSCRIPT

  • RLCD TVSERVICE MANUAL

    CAUTIONBEFORE SERVICING THE CHASSIS,READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

    CHASSIS : LP61CFACTORY MODEL : 26LC2R-TJ / 32LC2R-TJ

    MODEL : 26LC2R / 32LC2R

    website:http://biz.LGservice.come-mail:http://www.LGEservice.com/techsup.html

  • - 2 -

    CONTENTS

    CONTENTS .............................................................................................. 2

    SAFETY PRECAUTIONS ..........................................................................3

    SPECIFICATION ........................................................................................6

    ADJUSTMENT INSTRUCTION ...............................................................12

    TROUBLE SHOOTING ............................................................................21

    BLOCK DIAGRAM...................................................................................28

    WIRING ....................................................................................................30

    EXPLODED VIEW .................................................................................. 31

    REPLACEMENT PARTS LIST ............................................................... 35

    SVC. SHEET ...............................................................................................

  • - 3 -

    SAFETY PRECAUTIONS

    Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in theSchematic Diagram and Replacement Parts List. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to preventX-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer.

    General Guidance

    An isolation Transformer should always be used during theservicing of a receiver whose chassis is not isolated from the ACpower line. Use a transformer of adequate power rating as thisprotects the technician from accidents resulting in personal injuryfrom electrical shocks.

    It will also protect the receiver and it's components from beingdamaged by accidental shorts of the circuitry that may beinadvertently introduced during the service operation.

    If any fuse (or Fusible Resistor) in this TV receiver is blown,replace it with the specified.

    When replacing a high wattage resistor (Oxide Metal Film Resistor,over 1W), keep the resistor 10mm away from PCB.

    Keep wires away from high voltage or high temperature parts.

    X-RAY Radiation

    Warning:

    To determine the presence of high voltage, use an accurate highimpedance HV meter.

    Adjust brightness, color, contrast controls to minimum. Measure the high voltage. The meter reading should indicate 23.5 1.5KV: 14-19 inch, 26 1.5KV: 19-21 inch,29.0 1.5KV: 25-29 inch, 30.0 1.5KV: 32 inchIf the meter indication is out of tolerance, immediate service andcorrection is required to prevent the possibility of prematurecomponent failure.

    Before returning the receiver to the customer,

    always perform an AC leakage current check on the exposedmetallic parts of the cabinet, such as antennas, terminals, etc., tobe sure the set is safe to operate without damage of electricalshock.

    Leakage Current Cold Check(Antenna Cold Check)With the instrument AC plug removed from AC source, connect anelectrical jumper across the two AC plug prongs. Place the ACswitch in the on position, connect one lead of ohm-meter to the ACplug prongs tied together and touch other ohm-meter lead in turn toeach exposed metallic parts such as antenna terminals, phonejacks, etc. If the exposed metallic part has a return path to the chassis, themeasured resistance should be between 1M and 5.2M. When the exposed metal has no return path to the chassis thereading must be infinite.An other abnormality exists that must be corrected before thereceiver is returned to the customer.

    Leakage Current Hot Check (See below Figure) Plug the AC cord directly into the AC outlet.Do not use a line Isolation Transformer during this check.Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitorbetween a known good earth ground (Water Pipe, Conduit, etc.)and the exposed metallic parts.Measure the AC voltage across the resistor using AC voltmeterwith 1000 ohms/volt or more sensitivity.Reverse plug the AC cord into the AC outlet and repeat AC voltagemeasurements for each exposed metallic part. Any voltagemeasured must not exceed 0.75 volt RMS which is corresponds to0.5mA.In case any measurement is out of the limits specified, there ispossibility of shock hazard and the set must be checked andrepaired before it is returned to the customer.

    Leakage Current Hot Check circuit

    The source of X-RAY RADIATION in this TV receiver is the HighVoltage Section and the LCD PANEL.For continued X-RAY RADIATION protection, the replacementpanel must be the same type panel as specif ied in theReplacement Parts List.

    1.5 Kohm/10W

    To Instrument'sexposed METALLIC PARTS

    Good Earth Groundsuch as WATER PIPE,CONDUIT etc.

    AC Volt-meter

    IMPORTANT SAFETY NOTICE

    0.15uF

  • - 4 -

    CAUTION: Before servicing receivers covered by this servicemanual and its supplements and addenda, read and follow theSAFETY PRECAUTIONS on page 3 of this publication.NOTE: If unforeseen circumstances create conflict between thefollowing servicing precautions and any of the safety precautions onpage 3 of this publication, always follow the safety precautions.Remember: Safety First.

    General Servicing Precautions1. Always unplug the receiver AC power cord from the AC power

    source before;a. Removing or reinstalling any component, circuit board

    module or any other receiver assembly.b. Disconnecting or reconnecting any receiver electrical plug or

    other electrical connection.c. Connecting a test substitute in parallel with an electrolytic

    capacitor in the receiver.CAUTION: A wrong part substitution or incorrect polarityinstallation of electrolytic capacitors may result in anexplosion hazard.

    2. Test high voltage only by measuring it with an appropriate highvoltage meter or other voltage measuring device (DVM,FETVOM, etc) equipped with a suitable high voltage probe.Do not test high voltage by "drawing an arc".

    3. Do not spray chemicals on or near this receiver or any of itsassemblies.

    4. Unless specified otherwise in this service manual, cleanelectrical contacts only by applying the following mixture to thecontacts with a pipe cleaner, cotton-tipped stick or comparablenon-abrasive applicator; 10% (by volume) Acetone and 90% (byvolume) isopropyl alcohol (90%-99% strength)CAUTION: This is a flammable mixture.Unless specified otherwise in this service manual, lubrication ofcontacts in not required.

    5. Do not defeat any plug/socket B+ voltage interlocks with whichreceivers covered by this service manual might be equipped.

    6. Do not apply AC power to this instrument and/or any of itselectrical assemblies unless all solid-state device heat sinks arecorrectly installed.

    7. Always connect the test receiver ground lead to the receiverchassis ground before connecting the test receiver positivelead.Always remove the test receiver ground lead last.

    8. Use with this receiver only the test fixtures specified in thisservice manual.CAUTION: Do not connect the test fixture ground strap to anyheat sink in this receiver.

    Electrostatically Sensitive (ES) DevicesSome semiconductor (solid-state) devices can be damaged easilyby static electricity. Such components commonly are calledElectrostatically Sensitive (ES) Devices. Examples of typical ESdevices are integrated circuits and some field-effect transistors andsemiconductor "chip" components. The following techniquesshould be used to help reduce the incidence of componentdamage caused by static by static electricity.1. Immediately before handling any semiconductor component or

    semiconductor-equipped assembly, drain off any electrostaticcharge on your body by touching a known earth ground.Alternatively, obtain and wear a commercially availabledischarging wrist strap device, which should be removed toprevent potential shock reasons prior to applying power to the

    unit under test.2. After removing an electrical assembly equipped with ES

    devices, place the assembly on a conductive surface such asaluminum foil, to prevent electrostatic charge buildup orexposure of the assembly.

    3. Use only a grounded-tip soldering iron to solder or unsolder ESdevices.

    4. Use only an anti-static type solder removal device. Some solderremoval devices not classified as "anti-static" can generateelectrical charges sufficient to damage ES devices.

    5. Do not use freon-propelled chemicals. These can generateelectrical charges sufficient to damage ES devices.

    6. Do not remove a replacement ES device from its protectivepackage until immediately before you are ready to install it.(Most replacement ES devices are packaged with leadselectrically shorted together by conductive foam, aluminum foilor comparable conductive material).

    7. Immediately before removing the protective material from theleads of a replacement ES device, touch the protective materialto the chassis or circuit assembly into which the device will beinstalled.CAUTION: Be sure no power is applied to the chassis or circuit,and observe all other safety precautions.

    8. Minimize bodily motions when handling unpackagedreplacement ES devices. (Otherwise harmless motion such asthe brushing together of your clothes fabric or the lifting of yourfoot from a carpeted floor can generate static electricitysufficient to damage an ES device.)

    General Soldering Guidelines1. Use a grounded-tip, low-wattage soldering iron and appropriate

    tip size and shape that will maintain tip temperature within therange or 500 F to 600 F.

    2. Use an appropriate gauge of RMA resin-core solder composedof 60 parts tin/40 parts lead.

    3. Keep the soldering iron tip clean and well tinned.4. Thoroughly clean the surfaces to be soldered. Use a mall wire-

    bristle (0.5 inch, or 1.25cm) brush with a metal handle.Do not use freon-propelled spray-on cleaners.

    5. Use the following unsoldering techniquea. Allow the soldering iron tip to reach normal temperature.

    (500 F to 600 F)b. Heat the component lead until the solder melts.c. Quickly draw the melted solder with an anti-static, suction-

    type solder removal device or with solder braid.CAUTION: Work quickly to avoid overheating thecircuitboard printed foil.

    6. Use the following soldering technique.a. Allow the soldering iron tip to reach a normal temperature

    (500 F to 600 F)b. First, hold the soldering iron tip and solder the strand against

    the component lead until the solder melts.c. Quickly move the soldering iron tip to the junction of the

    component lead and the printed circuit foil, and hold it thereonly until the solder flows onto and around both thecomponent lead and the foil.CAUTION: Work quickly to avoid overheating the circuitboard printed foil.

    d. Closely inspect the solder area and remove any excess orsplashed solder with a small wire-bristle brush.

    SERVICING PRECAUTIONS

  • - 5 -

    IC Remove/ReplacementSome chassis circuit boards have slotted holes (oblong) throughwhich the IC leads are inserted and then bent flat against thecircuit foil. When holes are the slotted type, the following techniqueshould be used to remove and replace the IC. When working withboards using the familiar round hole, use the standard techniqueas outlined in paragraphs 5 and 6 above.

    Removal1. Desolder and straighten each IC lead in one operation by gently

    prying up on the lead with the soldering iron tip as the soldermelts.

    2. Draw away the melted solder with an anti-static suction-typesolder removal device (or with solder braid) before removing theIC.

    Replacement1. Carefully insert the replacement IC in the circuit board.2. Carefully bend each IC lead against the circuit foil pad and

    solder it.3. Clean the soldered areas with a small wire-bristle brush.

    (It is not necessary to reapply acrylic coating to the areas).

    "Small-Signal" Discrete TransistorRemoval/Replacement1. Remove the defective transistor by clipping its leads as close as

    possible to the component body.2. Bend into a "U" shape the end of each of three leads remaining

    on the circuit board.3. Bend into a "U" shape the replacement transistor leads.4. Connect the replacement transistor leads to the corresponding

    leads extending from the circuit board and crimp the "U" withlong nose pliers to insure metal to metal contact then soldereach connection.

    Power Output, Transistor DeviceRemoval/Replacement1. Heat and remove all solder from around the transistor leads.2. Remove the heat sink mounting screw (if so equipped).3. Carefully remove the transistor from the heat sink of the circuit

    board.4. Insert new transistor in the circuit board.5. Solder each transistor lead, and clip off excess lead.6. Replace heat sink.

    Diode Removal/Replacement1. Remove defective diode by clipping its leads as close as

    possible to diode body.2. Bend the two remaining leads perpendicular y to the circuit

    board.3. Observing diode polarity, wrap each lead of the new diode

    around the corresponding lead on the circuit board.4. Securely crimp each connection and solder it.5. Inspect (on the circuit board copper side) the solder joints of

    the two "original" leads. If they are not shiny, reheat them and ifnecessary, apply additional solder.

    Fuse and Conventional ResistorRemoval/Replacement1. Clip each fuse or resistor lead at top of the circuit board hollow

    stake.2. Securely crimp the leads of replacement component around

    notch at stake top.3. Solder the connections.

    CAUTION: Maintain original spacing between the replacedcomponent and adjacent components and the circuit board toprevent excessive component temperatures.

    Circuit Board Foil RepairExcessive heat applied to the copper foil of any printed circuitboard will weaken the adhesive that bonds the foil to the circuitboard causing the foil to separate from or "lift-off" the board. Thefollowing guidelines and procedures should be followed wheneverthis condition is encountered.

    At IC ConnectionsTo repair a defective copper pattern at IC connections use thefollowing procedure to install a jumper wire on the copper patternside of the circuit board. (Use this technique only on ICconnections).

    1. Carefully remove the damaged copper pattern with a sharpknife. (Remove only as much copper as absolutely necessary).

    2. carefully scratch away the solder resist and acrylic coating (ifused) from the end of the remaining copper pattern.

    3. Bend a small "U" in one end of a small gauge jumper wire andcarefully crimp it around the IC pin. Solder the IC connection.

    4. Route the jumper wire along the path of the out-away copperpattern and let it overlap the previously scraped end of the goodcopper pattern. Solder the overlapped area and clip off anyexcess jumper wire.

    At Other ConnectionsUse the following technique to repair the defective copper patternat connections other than IC Pins. This technique involves theinstallation of a jumper wire on the component side of the circuitboard.

    1. Remove the defective copper pattern with a sharp knife.Remove at least 1/4 inch of copper, to ensure that a hazardouscondition will not exist if the jumper wire opens.

    2. Trace along the copper pattern from both sides of the patternbreak and locate the nearest component that is directlyconnected to the affected copper pattern.

    3. Connect insulated 20-gauge jumper wire from the lead of thenearest component on one side of the pattern break to the leadof the nearest component on the other side.Carefully crimp and solder the connections.CAUTION: Be sure the insulated jumper wire is dressed so theit does not touch components or sharp edges.

  • - 6 -

    1. Application rangeThis specification is applied to LP61C chassis.

    2. Requirement for TestTesting for standard of each part must be followed in belowcondition.

    (1) Temperature : 25C5C(779F), CST : 405(2) Humidity : 65%10%(3) Power : Standard input voltage (AC 100-240V, 50/60Hz)

    *Standard Voltage of each products is marked by models(4) Specification and performance of each parts are followed

    each drawing and specif ication by part number inaccordance with BOM.

    (5) The receiver must be operated for about 20 minutes priorto the adjustment.

    3. Test method

    3.1 Performance : LGE TV test method followed3.2 Demanded other specification

    Safety : CE, IEC SpecificationEMC : CE, IEC

    SPECIFICATIONNOTE : Specifications and others are subject to change without notice for improvement.

    4. Electrical Specification4.1 Module Specification4.1.1 General Specification(26/32/37" LCD MODULE)

    No Item Specification Remark1. Display Screen Device 26/32inch wide Color Display Module LCD2. Aspect Ratio 16:93. LCD Module 26/32 TFT WXGA LCD MAKER : AUO/CMO/LPL4. Operating Environment 1) Temp. : 0 ~ 40 deg LGE SPEC

    2) Humidity : 0 ~ 85%5. Storage Environment 3) Temp. : -20 ~ 60 deg

    4) Humidity : 0 ~ 85 %6. Input Voltage AC100 ~ 240V, 50/60Hz7. Power Consumption Power on (White) Volume: 1/8 volume of sound distortion point

    max 160W (32") max 130W (26")St-By (Red) : 1.0 W

  • - 7 -

    4.2 Model Specification 4.2.1 NON-EU / CHINA (TJ/CJ)

    No Item Specification Remark1. Market NON EU / CHINA 26/32LC2R-TJ

    26/32/37LC2R-CJ2. Broadcasting system PAL BG/DK, PAL I/II, NTSC-M3. Available Channel BAND PAL NTSC

    VHF/UHF C1~C69 2~83CATV S1~S47 1~71

    4. Receiving system Upper Heterodyne5. Video Input (2EA) PAL, SECAM, NTSC 4 System :

    PAL, SECAM, NTSC, PAL606. Monitor Output (1EA) PAL, SECAM, NTSC 4 System :

    PAL, SECAM, NTSC, PAL607. S-Video Input (1EA) PAL, SECAM, NTSC 4 System : S-video Priority

    PAL, SECAM, NTSC, PAL60

    8. Component Input (2EA) Y/Cb/Cr, Y/ Pb/Pr9. RGB Input (1EA) RGB-PC, RGB-DTV10. HDMI Input (1EA) HDMI-DTV EXCEPT 26/32/37LC2R - CJ

    (CJ : NO HDMI - Spec. Out)11. Audio Input (5 EA) PC Audio, Component (2EA), AV (2EA) L/R Input12. Wired Control (1EA)13. Variable Audio out(1EA)

    5. Chroma & Brightness (Optical)5.1 LCD Module

    No Item Min Typ Max Unit Maker Remark1 Luminance 350 500 cd/m2 AUO 26", 32", 37" -50cm from the surface

    LPL 26", 32" - Full White Pattern550 CMO 27", 32"

    2 View angle (R/L, U/D) 176/176 degree AUO 26" - CR >10170/170 AUO 32"176/176 AUO 37"170/170 CMO 27"176/176 CMO 32" - CR > 20178/178 LPL 26", 32" - CR > 10

    3 Color White X Typ. 0.280 Typ. - CIE 1393Coordinate Y -0.03 0.290 +0.03 AUO 26, 37" (32")

    Red X 0.640Y 0.330

    Green X 0.290(0.270)

    Y 0.600Blue X 0.150

    Y 0.060

  • - 8 -

    No Item Min Typ Max Unit Maker RemarkWhite X Typ. 0.285 Typ. CMO 27"

    -0.03 +0.03 (32")Y 0.293

    Red X 0.646(0.652)

    Y 0.332Green X 0.269

    (0.270)Y 0.600

    (0.589)Blue X 0.142

    (0.141)Y 0.072

    (0.068)White X Typ. 0.275 Typ. LPL 26"

    -0.03 (0.285) +0.03 (32")Y 0.279

    (0.293)Red X 0.630

    (0.640)Y 0.338

    (0.343)Green X 0.283

    (0.280)Y 0.607

    (0.605)Blue X 0.147

    (0.145)Y 0.064

    (0.065)4 Contrast ratio 800 / 1200 AUO 26"/ 32" / 37"

    / 1000600 / 1000 CMO 27" / 32"800 (1600) LPL 26, 32" (with AI)

    5 Color Normal 8300 9300 10300 - 85IRE Full White PatternTemperature Warm 6200 7200 8200

    Cool 10000 11000 12000

  • - 9 -

    6. Component Video Input (Y, PB, PR)No Resolution H-freq(kHz) V-freq.(kHz) Pixel clock(MHz) Proposed Remarks1. 720x480 15.73 59.94 13.500 SDTV, DVD 480I(525I)2. 720x480 15.75 60.00 13.514 SDTV, DVD 480I(525I)3. 720x576 15.625 50.00 13.500 SDTV, DVD 576I(625I), 50Hz4. 720x480 31.47 59.94 27.000 SDTV 480P5. 720x480 31.50 60.00 27.027 SDTV 480P6. 720x576 31.25 50.00 27.000 SDTV 576P 50Hz7. 1280x720 44.96 59.94 74.176 HDTV 720P8. 1280x720 45.00 60.00 74.250 HDTV 720P9. 1280x720 37.50 50.00 74.25 HDTV 720P 50Hz10. 1920x1080 33.72 59.94 74.176 HDTV 1080I11. 1920x1080 33.75 60.00 74.250 HDTV 1080I12. 1920x1080 28.125 50.00 74.250 HDTV 1080I 50Hz,

    7. RGB Input (Analog PC )No Resolution H-freq(kHz) V-freq.(kHz) Pixel clock(MHz) Proposed Remarks1. 640x350 31.468 70.80 25.17 EGA2. 720x400 31.469 70.80 28.321 DOS3. 640x480 31.469 59.94 25.17 VESA(VGA)4. 800x600 37.879 60.31 40.00 VESA(SVGA)5. 1024x768 48.363 60.00 65.00 VESA(XGA)6. 1280x768 47.776 59.87 79.50 WXGA XGA only7. 1360x768 47.720 59.799 84.75 WXGA XGA only8. 1366x768 47.720 59.799 84.75 WXGA XGA only

    No Resolution H-freq(kHz) V-freq.(kHz) Pixel clock(MHz) Proposed Remarks1. 720x480 31.47 59.94 27.000 SDTV 480P2. 720x480 31.50 60.00 27.027 SDTV 480P3. 720x576 31.25 50.00 27.000 SDTV 576P 50Hz4. 1280x720 44.96 59.94 74.176 HDTV 720P5. 1280x720 45.00 60.00 74.250 HDTV 720P6. 1280x720 37.50 50.00 74.25 HDTV 720P 50Hz7. 1920x1080 33.72 59.94 74.176 HDTV 1080I8. 1920x1080 33.75 60.00 74.250 HDTV 1080I9. 1920x1080 28.125 50.00 74.250 HDTV 1080I 50Hz

    8. RGB input ( DTV )

    No Resolution H-freq(kHz) V-freq.(kHz) Pixel clock(MHz) Proposed Remarks1. 720x480 15.75 60.00 13.514 SDTV, DVD 480I(525I)2. 720x480 15.73 59.94 13.500 SDTV, DVD 480I(525I)3. 720x576 15.625 50.00 13.500 SDTV, DVD 576I(625I), 50Hz4. 720x480 31.47 59.94 27.000 SDTV 480P.5. 720x480 31.50 60.00 27.027 SDTV 480P6. 720x576 31.25 50.00 27.000 SDTV 576P 50Hz7. 1280x720 44.96 59.94 74.176 HDTV 720P8. 1280x720 45.00 60.00 74.250 HDTV 720P9. 1280x720 37.50 50.00 74.25 HDTV 720P 50Hz10. 1920x1080 33.72 59.94 74.176 HDTV 1080I11. 1920x1080 33.75 60.00 74.250 HDTV 1080I12. 1920x1080 28.125 50.00 74.250 HDTV 1080I 50Hz

    9. HDMI input ( DTV )

  • - 10 -

    10. SET factoring conditionNo Item Setting Remarks1. Station Auto Programme System BG

    Storage from 1Search To start

    Manual Programme Storage 1System BGBand V/UHFChannel 69Fine / Search / Name _ _ _ _ _

    Programme Edit To setFavorite programme -- -----Ch memory TBD TBD

    2. Picture PSM DynamicCSM Normal For ZJ

    Cool For TJ, CJFor MJ

    XD AutoAdvanced Cinema : Off

    Black Level : LowReset

    3. Sound SSM FlatAVL OffTV Speaker On

    4. Time Clock --: --Off Time --: --

    OffOn Time --: --

    PR 1Vol. 30Off

    Auto Sleep Off5. Special Language English Following Buyer's demand, PR

    Child Lock OffSet ID 1XD Demo To Start

    6. Screen Auto Config. Available For RGB-PC modeManual Config. Phase 0 Available For RGB-PC mode

    Clock 0H-Position 0 Available For RGB modeV-Position 0

    XGA Mode 1024x768 Available for RGB-PC XGA 60HzARC 16:9Reset To set

  • 11. Mechanical Specification11.1 26LC2R

    11.2 32LC2R

    - 11 -

    No Item Content Remark1. Product Width Length Height Unit

    Dimension Before Packing 681 235 550 mm SET(With Stand)After Packing 749 275 640 mm

    2. Product Only SET 16.8 KgWeight With BOX 18.9 Kg

    No Item Content Remark1. Product Width Length Height Unit

    Dimension Before Packing 811 235 630 mm SET(With Stand)After Packing 896 300 720 mm

    2. Product Only SET 22 KgWeight With BOX 25.5 Kg

  • - 12 -

    ADJUSTMENT INSTRUCTION1. Application Range

    This spec sheet is applied all of the26/32" LCD TV, LP61A/C,LN61A chassis(HURRICANE 3 MIDDLE) by manufacturingLG TV Plant all over the world.

    2. Specification2.1 Because this is not a hot chassis, it is not necessary to

    use an isolation transformer. However, the use of isolationtransformer will help protect test instrument.

    2.2 Adjustment must be done in the correct order.2.3 The adjustment must be performed in the circumstance of

    255C of temperature and 6510% of relative humidity ifthere is no specific designation.

    2.4 The input voltage of the receiver must keep 100~220V,50/60Hz.

    2.5 Before adjustment, execute Heat-Run for 30 minutes atRF no signal.

    3. Adjustment items 3.1 PCB assembly adjustment items Download the VCTP main software (IC601,VCPT) Channel memory (IC603,EEPROM) Colorcarrier Adjustment

    3.2 SET assembly adjustment items DDC Data input. Adjustment of White Balance. Factoring Option Data input.

    4. PCB assembly adjustment4.1 PCB assembly adjustment method

    (Using VCTP Download program)4.1.1.Download program installation

    (1) Extract a Zip file

    (2) Visual I2C & LPT Driver Installation

    LPT Port Driver (LptDrv) Setups : Program Files > Micronas >Visual I2C > Port_Driver

    *Use for Windows 95/98 : Setup_LptDrv_v0104_9x.exe*Use for Windows 2000/XP : Setup_LptDrv_v0202_XP_2000.exe*Use for Windows NT : Setup_LptDrv_v0104_NT.exe

    (3) Verification (Start > Programs > Micronas > VisualI2C or LptDrv)

    (4) LPT delay sett ing (File > Preference > LPTpreferences)

    (5) Exchange the bootloader.bat file

    Install the LPT DriverInstall the Visual I2C

    *LPT SETTING- Delay => 1- Timeout => 500 ms

    => Double click the Box area.

    => Double click the Box area.

  • - 13 -

    4.1.2. S/W program download Preliminary steps4.1.2.1 Download method 1 (PCB Assy)

    (1) Connect the download jig to D-sub jack

    (2) Execute Download.vi2c program in PC, then a mainwindow will be opened

    (3) Double click the blue box and confirm "BootloaderVersion" as 40.

    (4) Click the "Erase Flash" button

    (5) Double click the download file low, then "edit"window will be opened

    (6) Click the choice button in the "edit window", then"file choice window" will be opened

    (7)Choose the Hex fi le in folder and executedownloading with click " open" button.

    => Select the "Bootloader.bat" f i le(install >VCTP_download > Bootloader)

    => Push "OK"

    => Finish the program, after saving the fi le"download_cs.vi2c"

    (if you click , the massage appears automatically)x

  • - 14 -

    (8) Click OK button at the "edit window"

    (9) Under Downloading process

    (10) If download is failed, for example "No acknowledgefrom slave". Execute download again from(1)

    4.1.2.2 Download method 2 (AV Plate Assy)

    (1) Push S/W ON" (connect SCL to GND using switchat Jig ) and connect the download jig to D-sub jack

    (2) Supply the power (Stand-by 5V) and wait for 3seconds.

    (3) Push the S/W off (Disconnect SCL to GND usingswitch at jig)

    (4) Execute Download.vi2c program in PC, then a mainwidow will be opened.

    (5) Double click the blue box and confirm "BootloaderVersion" as 40.

    Push S/W

    Double click

    Push S/W

  • (6)Click the "Erase Flash" button

    (7) Double click the download file low then, "edit"window will be opened

    (8) Chick the choice button I n the "edit window", then"file choice window will be opened

    (9) Choose the Hex fi le in folder and executedownloading with click "open button"

    (10) Click OK button at the "edit window"

    (11) Under Downloading progress

    (12) If download is failed, for example "No acknowledgefrom slave", execute download again from (1)

    4.1.2.2 Download method 3 (SET)(1) Push the "Tilt" button in an Adjust Remocon Then

    the LCD TV will change a "slave mode"

    (2) Connect Zig to TV using a D-sub cable

    - 15 -

  • (3) Execute Download_CS.vi2c program in PC, then amain widow will be opened.

    (4) Click "GO" button

    (5) Double click the blue box and confirm "BootloaderVersion" as 40.

    (6)Click the "Erase Flash" button

    (7) Double click the download file low then, "edit"window will be opened

    (8) Chick the choice button I n the "edit window", then"file choice window will be opened

    (9) Choose the Hex fi le in folder and executedownloading with click "open button"

    (10) Click OK button at the "edit window"

    (11) Under Downloading progress

    (12) If download is failed, for example "No acknowledgefrom slave", execute download again from (1)

    - 16 -

    Double click

    If you dont push the "go",the Hex file would not bedownloaded although thedownload proceeds normallyat first glance

  • 4.1.2. S/W program download(1) Connect the download jig to D-sub jack(2) Execute Channal.vi2c program in PC, then a main widow

    will be opened.

    (3) Push the button change and select the Channel memorydata

    (4) Check the communication is OK or not.=> Push the Read area (Ackn. Check) and check Cyan

    area is OK message.

    (5) Push the Update NVM from File

    4.1.3. Colorcarrier Adjustment (inspection process)a. Tuning the RF signal

    ZJ, TJ, CJ : PAL Philips Pattern (with Color Bar)MJ : NTSC Digital Pattern (with Color Bar)

    b. push the "adj" key in the adjustment remocon.

    4.2 SET assembly adjustment method *Caution : Each PCB assembly must be checked by check

    JIG set.(Because power PCB Assembly damagesto LCD Module, especially be careful)

    4.2.1 EDID(The Extended Display Identification Data ) /DDC(Display Data Channel) download

    (1) Extract a Zip file* Caution

    - Use the proper signal cable for EDID Download

    * Caution: - Never connect HDMI & D-SUB Cable at thesame time.

    - Use the proper cables below for EDID Writing

    - 17 -

  • < EDID DATA HDMI Set : 256bytes>

    => Detail EDID Options are below(a, b, c, d, e)a. Product ID

    b. Serial No: Controlled on production linec. Month, Year: Controlled on production line:

    ex) Montly: 03 => 03 Year: 2005 => 0F

    d. Model Name(Hex) :

    e.Checksum: Changeable by total EDID data

    4.3 Adjustment of White Balance * In case of White Balance rework, you have to RESET

    the previous White Balance data.(You can do that by pushing the "IN-START" key inadjust remocon and reset)

    4.3.1 Required Equipment Remote controller for adjustment Color Analyzer (CA-110 or CA-210 or same product; ch : 9) Auto W/B adjustment instrument (only for Auto adjustment) AV Pattern Generator

    ZJ, TJ, CJ model : 202 (PAL-BDGHI), pattern:78 (216Gray)

    MJ model : 207 (NTSC-J), pattern : 78 (216 Gray)

    4.3.2 Connecting diagram of equipment for measuring (ForAutomatic Adjustment)

    [Push the "POWER ON" key at the Adjust Remocon beforeAdjustment of W/B, the Baud rate & PSM, CSM will change115200bps, Standard (MJ: Optimum), Normal]

    4.3.3 Adjustment of White Balance for Manual adjustment Operate the zero-calibration of the CA-110 or CA-210, then

    stick sensor to LCD module when you adjust. For manual adjustment, it is also possible by the following

    sequence1) Select RF no signal by pressing "POWER ON" key on

    remote control for adjustment then operate heat run morethan 15 minutes.

    2) As below Fig. 7, Supply 216Level (85 IRE) Gray pattern toVideo input.

    26/32LC2R-ZJ : AV3 or AV4(Input 50Hz)26/32LC2R-TJ : AV1or AV2(Input 50Hz),26/32/37LC2R-CJ : AV1 or AV2 (Input 50Hz)26,32LC2R-MJ : VIDEO1 or VIDEO2 (Input 60Hz)

    3) Press the POWER ON KEY on R/C for converting inputmode.

    4) Enter the White Balance adjustment mode by pressing theIN-START key (White Balance) on R/C.

    5) Stick sensor to center of the screen and select each items(Red/Green/Blue Gain and Offset) using / (CH +/-) keyon R/C..

    6) Adjust Only High Light with R Gain / B Gain using /(VOL + / -) key on R/C.

    7) Adjust it until color coordination becomes as below. (Initially, R/G/B gain and R/G/B offset values are fixed asbelow)

    Red Gain : 80 , Green Gain : 80 , Blue Gain : 80Red Offset : 80, Green Offset : 80 , Blue Offset : 80

    * Target Value [PSM: Standard(ZJ, TJ, CJ), Optimum(MJ),CSM: Normal]

    -Normal (9300K) x ; 0.2830.003 y ; 0.2980.003=> Reference Value(Automatically fixed)

    -Cool(11000K): x:0.2740.003, y: 0.2860.003-Warm(7200K) : x:0.3030.003, y: 0.3190.003

    8) When adjustment is completed, Exit adjustment modeusing EXIT key on R/C.

    - 18 -

    Model NameProduct ID

    Dec Hex EDID table26C2R 22045(A) 561D 1D56

    22046(B) 561E 1E5632LC2R 30057(A) 7569 6975

    30058(D) 756A 6A7537LC2R 30059(A) 756B 6B75

    30060(D) 756C 6C75

    Model Name Model Name(HEX)26LC2R-TJ 32 36 4C 43 32 52 2D 54 4A32LC2R-TJ 33 32 4C 43 32 52 2D 54 4A

    216 Level(85IRE)

    * Pattern for Adjustment of White Balance

  • - 19 -

    7. Shipping ConditionsNo Item Condition Remark1 Power Off2 Volume Level 303 Main Picture Input TV4 Main Last Channel Pr 015 Mute Off6 ARC 16 : 97 Station Auto Programme

    Manual ProgrammeProgramme EditFavorite Programme None

    8 Picture PSM DynamicDynamic Contrast 100

    Brightness 50Colour 50Sharpness 50

    CSM NormalXD AutoAdvancedReset

    9 Sound SSM FlatOff

    AVL OffBalance 0

    5050

    Speaker On10 Time Clock --:-- User control

    Off time OffOn time OffAuto sleep Off

    11 Special Language English Area managementChild Lock OffSet ID 1XD Demo To start

    12 Screen Auto config.Manual config.XGA/VGA mode Variable by each modeARCPFP TransparencyReset

  • - 20 -

    SVC REMOCONNO KEY FUNTION REAMARK

    1 POWER

    2 POWER ON

    3 MUTE4 P-CHECK5 S-CHECK6 ARC7 CAPTION8 TXT9 TV/AV10 TURBO SOUND11 TURBO PICTURE

    12 IN-START

    13 ADJ14 MPX15 EXIT16 APC(PSM)17 ASC(SSM)18 MULTIMIDIA19 FRONT-AV20 CH21 VOL22 ENTER

    23 PIP CH-(OP1)

    24 PIP CH+(OP2)

    25 PIP SWAP(OP3)

    26 PIP INPUT(OP4)

    27 EYE

    28 MENU29 IN-STOP30 STILL

    31 TIME

    32 SIZE

    33 MULTI PIP

    34 POSITION

    35 MODE36 PIP37 TILT38 0~9

    To turn the TV on or offTo turn the TV on automatically if the power is supplied to the TV. (Use thePOWER key to deactivate): It should be deactivated when delivered.To activate the mute function.To check TV screen image easily.To check TV screen sound easilyTo select size of the main screen (Normal, Spectacle, Wide or Zoom)Switch to closed caption broadcastingTo toggle on/off the teletext modeTo select an external input for the TV screenTo start turbo soundTo start turbo pictureTo enter adjustment mode when manufacturing the TV sets.To adjust the screen voltage (automatic): In-start mute Adjust AV(Enter into W/B adjustment mode)W/B adjustment (automatic):After adjusting the screen W/B adjustment Exit two times (Adjustment completed)To enter into the adjustment mode. To adjust horizontal line and sub-brightness.To select the multiple sound mode (Mono, Stereo or Foreign language)To release the adjustment modeTo easily adjust the screen according to surrounding brightnessTo easily adjust sound according to the program typeTo check component inputTo check the front AVTo move channel up/down or to select a function displayed on the screen.To adjust the volume or accurately control a specific function.To set a specific function or complete setting.To move the channel down in the PIP screen.To use as a red key in the teletext modeTo move the channel in the PIP screenTo use as a green key in the teletext modeTo switch between the main and sub screensTo use as a yellow key in the teletext modeTo select the input status in the PIP screenTo use as a blue key in the teletext modeTo set a function that will automatically adjust screen status to matchthe surrounding brightness so natural color can be displayed.To select the functions such as video, voice, function or channel.To set the delivery condition status after manufacturing the TV set.To halt the main screen in the normal mode, or the sub screen at the PIP screen.Used as a hold key in the teletext mode (Page updating is stopped.)Displays the teletext time in the normal modeEnables to select the sub code in the teletext modeUsed as the size key in the PIP screen in the normal modeUsed as the size key in the teletext modeUsed as the index key in the teletext mode (Top index will bedisplayed if it is the top text.)To select the position of the PIP screen in the normal modeUsed as the update key in the teletext mode (Text will bedisplayed if the current page is updated.)Used as Mode in the teletext modeTo select the simultaneous screenTo adjust screen tiltTo manually select the channel.

    Shortcut keysShortcut keysShortcut keys

    Use the AVkey to enterthe screenW/Badjustmentmode.

    Shortcut keysShortcut keys

    Shortcut keys

  • - 21 -

    TROUBLESHOOTING

    1. No power(1) Symptom

    1) Front LED is No light2) The Set doesnt discharge little

    (2) Check process

    Is plug in power cord? Plug in a power cordNo

    Yes

    Is connect the line filter cable to PSU? Connect a cableNo

    Yes

    Is normal the Fuse(F901) on PSU Exchange the FuseNo

    Yes

    Is connect the PSU and Main board with 13P cable ?

    After remove the cable connect to PSU (except the EL11connection cable), authorizes the AC voltage marking on manual. When ST-BY 5V does not operate, replacePSU.

    Connect a 13p cableNo

    Yes

  • - 22 -

    2. Cannot Power on

    (1) Symptom1) Front LED is Red, but doesnt change Green ( Cannot turn on the SET ) 2) Dont operate power on using a Remocon or Local key.

    (2) Check process

    Pull off the power cord and wait until discharge entirely(you can watch the LED on a main board througha Back cover. If LED is off, a discharge is finished) Then plug in the power cord again. Has it still a problem?

    Yes

    Is connect the IR board, Local key, and main board with 10p and 4pin cable? Connect cables.

    No

    Yes

    Is normal the IR board and Local key? Exchange the IR and Local keyNo

    Yes

    Is normal the Main board?( Check voltages of P900 in main board ) Exchange the Main board

    No

  • - 23 -

    3. Protect mode

    (1) Symptom1) After once shining, it does not discharge minutely

    from module 2) The Rely falls down (The sound is audible click)3) The front LED turn Green to Red

    (2) Check process

    Exchange the PSUNo

    Yes

    Is normal cables? Do cable connect well each wafer?

    Is normal Main B/D?

    Is normal PSU? Does the Low/High voltage operate normally?

    No

    No

    No

    No

    YesDisconnecting cable(P301, P900, P1001) at main B/D, are Voltages normal?

    Exchange the cable

    Yes

    Exchange main board

  • 4. No raster

    (1) Symptom1) Front LED is Green 2) The Set doesnt discharge little

    (2) Check process

    - 24 -

    Exchange the PSUNo

    Yes

    Is normal cables? Do cable connect well each wafer?

    Is normal Main B/D?

    Is normal PSU? Does the Low/High voltage operate normally?

    No

    No

    No

    No

    YesDisconnecting cable(P301, P900, P1001) at main B/D, are Voltages normal?

    Exchange the cable

    Yes

    Exchange main board

  • 5. No Sound

    (1) Symptom1) Front LED is Green2) The Set display a screen, but a sound doesnt output

    (2) Check process1) Speaker part

    2) Main board part

    - 25 -

    Yes

    No

    Yes

    No No

    No No

    Are Speaker Cables Good?

    Is sound at HDMIGood?

    Is EDID downloadgood?

    Download EDIDdata once more.

    Yes Is IC401 good?(AD9381)

    Exchange IC401

    No

    No No No No

    Is sound atScart1/2 (orComponent2)RGB, or Side AV Good?

    Are good someelements (C, R, L,or Diode) at Soundpath?

    Is IC800 good?(Switching IC)

    If it dead or short,exchange thiselements

    No

    No

    Is sound at RF, AV,or Component1Good?

    Are good someelements (C, R, L,or Diode) at Soundpath?

    If it dead or short,exchange thiselements

    Yes Yes Is IC601 good?(VCT-P)

    Exchange IC601

    Is IC801 good?(Amplifier)

    Exchange IC801

    Yes

    Exchange IC800

    Exchange the cable Insert the cable exactly

    Are Speaker units good?Are Speaker Cablesconnect normally?

  • 6. Display the screen abnormally

    (1) Symptom1) Display the screen abnormally at specific mode

    (2) Check process1) Noise appears at RF mode.

    - 26 -

    Are input voltage, I2C,and CVBS output good?

    No

    No

    Is the Tuner part good? Is the Tuner cableconnected well?

    Insert the cable exactly

    Add the Gasket

    No

    Exchange the Tuner

    Re-assemble the SETIs Gaskets added well?

    Yes

    No No

    Yes

  • 7. No picture

    (1) Symptom1) Some mode doesnt display.2) Front LED is green3) The set still discharge a little

    (2) Check process1) RF-mode doesnt display

    2) AV/Component-mode doesnt display

    3) RGB/HDMI-mode doesn

    - 27 -

    Yes Yes Yes Yes

    No No No No No

    Is the LVDS cable connected?

    Is the Tuner cable connected?

    Are good someelements (C, R, L,or Diode) at path?

    Are input voltage,I2C, and CVBSoutput good inTuner?

    Is VCT-P IC good?

    Insert the LVDS cable exactly

    Insert the Tuner cable exactly

    If it dead or short, exchange thiselements

    Yes Yes

    No No No

    Is the LVDS cable connected?

    Are good someelements (C, R, L,or Diode) at path?

    Insert the LVDS cable exactly

    Is VCT-P IC good?

    Exchange theVCT-P IC

    If it dead or short, exchange thiselements

    Exchange theTuner

    Exchange theVCT-P IC

    Yes Yes Yes Yes

    No No No No

    Is the LVDS cable connected?

    Check the EDIDdata

    Is AD9381 good? (only _ HDMI)

    Are good someelements (C, R, L,or Diode) at path?

    Is VCT-P IC good?

    Insert the LVDS cable exactly

    No

    Download theEDID data

    If it dead or short, exchange thiselements

    Exchange AD9381IC

    Exchange theVCT-P IC

  • BLOCK DIAGRAM

    - 28 -

    P600

    (LPL)

    LVD

    S_JA

    EP6

    02(C

    MO)

    LVD

    S_JA

    E

    LVD

    S

    TXD

    /RXD

    12S

    TV_L/R

    MNT_L/R

    H/P_L/R

    SPK_L/R

    HDMI

    12S

    VS AUD

    IO D

    ELAY

    ICM

    AD48

    68a

    VGA_

    R/G

    /B/

    DS_

    HS/V

    S

    R /

    G /

    B CO

    MP2

    L/R

    COM

    P1 L

    /R

    COM

    PONE

    NT 2

    COM

    PONE

    NT 1

    AV3

    (REA

    R AV

    )

    MN

    T ou

    t

    SC 1

    /2_L

    /RCO

    MP2

    _L/R

    PC_A

    _L/R

    SIDE

    _L/R

    REA

    RY

    / C

    S-VI

    DEO

    HS

    / VS

    9V 5V TJ/

    MJ

    IC60

    274

    ACT2

    53SC

    VGA_

    R/G

    /B H

    SV-

    IN[R

    GB H

    88V

    1_RG

    B(C

    OMP0

    2)CO

    MP

    18I

    DE-V

    REA

    R-Y

    /C8C

    2_Y/

    C/V

    8C1_

    VR

    EAR

    _VTV

    _V]

    AUDI

    O_I

    NAU

    DIO

    _OUT

    (TV_

    L/R O

    UTW

    OT_L

    /R O

    UTH

    /P

    AV_A

    UDIO

    _L/R

    .CO

    WP1

    .REA

    R.

    BECA

    W-L-

    WO

    )

    SC 1

    _R,G

    ,B,FB

    (COM

    P 2 Y

    ,PB

    ,PR

    ) COM

    P 1 Y

    ,PB

    ,PR

    SIDE

    _V

    SC 2

    _V, Y

    IN, C

    REA

    R_V

    TV_V

    REA

    R Y

    /CIC

    601

    VCT6

    973

    SC 1

    _V AV_

    AUDI

    O_L/

    R

    IC80

    0AU

    DIO

    SW

    ITCH

    TEA

    STM

    HD

    MI_

    VS/H

    SVG

    A_HS

    /VS

    DS_

    H/V

    R/G

    /B/F

    BV/

    L/R

    in

    TV_LV/R out

    MNT_V/L/R out

    V/L/

    R in

    Y/C

    VGA_

    HS/

    VS

    IC30

    174

    HC1

    4D

    AV1

    (FUL

    L)AV

    2 (H

    ALF)

    WIR

    EDIR

    PCA-

    INR

    S-23

    2CH

    DM

    IVA

    R.A

    UD.O

    UTPD

    P D

    /LR

    F IN

    PUT

    COM

    P 2

    Y,PB

    ,PR

    COM

    P 1

    Y,PB

    ,PR

    V / H

    PC_A

    _L/R

    TX/R

    X

    H/P

    _L/R

    RFA

    AV4

    (SID

    E AV

    )

    SIDE

    _V

    SPK

    SPK_

    L/R

    19V

    3.3V

    IC40

    1TM

    DS

    RXAD

    9381

    1.8V

    5V(R

    eady

    )TP

    A310

    0D2

    IC80

    1AM

    P

    10W

    10W

    SIDE

    _L/R

    R,G

    ,B8b

    it

    P603

    (AUO

    )LV

    DS_

    JAE

    P601

    (PDP

    )JA

    E ST

    RAIG

    HT

    TUNE

    RTU

    1

    A-O

    UT

    V-O

    UTG

    ND33

    V5VSI

    F

    SDA

    SCL

    AFT

    AS +B

  • - 29 -

    CABL

    E IR

    TX IR

    Tx 0

    /1

    Rx

    0/1

    24C0

    2

    ST32

    32C

    74AC

    T253

    Tun

    er

    PC_A

    udi

    o_L/

    RSC

    ART1

    ,2_R

    /LSI

    DE_R

    /LCO

    MP2

    _R/L

    LC

    LC

    TV_O

    UTM

    NT_

    OUT

    TEA

    6420

    Soun

    d sw

    itch

    TV_V

    SIF

    COM

    P1_Y

    /Pb/

    PrCO

    MP2

    _Y/P

    b/Pr

    SCAR

    T1,2

    SCAR

    T1,2

    _ID

    REA

    R_Y

    CSI

    DE_Y

    CR

    EAR

    _VSI

    DE_V

    COM

    P1_R

    /LR

    EAR

    _R/L

    AM

    _AUD

    IO

    HS/

    VS

    TXD

    /RXD

    SCL/

    SDA

    VGA_

    RGB

    VGA_

    HS/V

    S

    PC_A

    udi

    o_L/

    R

    MN

    T_O

    UT

    REA

    R_Y

    C

    REA

    R_V

    COM

    P1_Y

    /Pb/

    Pr

    COM

    P2_Y

    /Pb/

    Pr

    COM

    P1,2

    _RIN

    /LIN

    SCAR

    T1,2

    _RIN

    /LIN

    SCAR

    T1,2

    _ID

    MN

    T_O

    UT

    Sil9

    011

    SIDE

    _R/L

    SIDE

    _YC

    R/L

    _Hea

    d

    R_A

    udi

    oL_

    Audi

    o

    R_S

    PK_O

    UTL_

    SPK_

    OUT

    TDA

    3008

    D2A

    mp

    TDA

    2822

    MA

    mp

    R/L

    _Hea

    d

    R_H

    ead

    VCTP

    32P_

    LVD

    S

    Tx0/

    1/2/

    3/4/

    C12

    v Pa

    nel 31P_

    LVD

    S

    L_H

    ead

    A/V

    S-A/

    VH

    /Pho

    ne

    SCL/

    SDA

    24C0

    2

    Varia

    ble_

    audi

    o_ou

    tL/

    R

    Varia

    ble_

    audi

    o_ou

    tL/

    R

    RX

    0/1/

    2/CL

    K

    TV_O

    UT

    HD

    MI_

    HS/

    VS

    RS2

    32

    RG

    B(P

    C/DT

    V)

    PC_A

    udi

    o

    RF

    MN

    T_O

    UT

    S-AV AV

    COM

    P 1

    COM

    P 2

    SCAR

    T 1

    SCAR

    T 2

    HD

    MI

    (PC/

    DTV)

    Varia

    ble

    Audi

    o_ou

    tRT RZ

    Tx0/

    1/2/

    3/4/

    CD

    ISP_

    EN

  • WIRING

    - 30 -

    14P

    PSU

    Mai

    n B

    /D

    2P

    13P 10P

    10P

    30P

    4P3P

    4P

    4PIR

    B/D

    Loc

    al K

    ey

    10P

    AC

    -inl

    et

    SPK

    (L)

    SPK

    (R)

    12P

    13P 10P

    Inve

    rter

    14P 12P

    T-c

    on 30P

  • - 31 -

    EXPL

    ODE

    D VI

    EW (2

    6LC2

    R)

    010

    020

    060

    070

    080

    090

    100

    030

    140

    150

    040

    130

    110

    050 1

    20

  • - 32 -

    EXPLODED VIEW PARTS LIST(26LC2R)No. PART NO. DESCRIPTION

    30919E0027M Cover Assembly, 26LC2R-ZJ] LP61C 26" HIPS 405AF(V0)-DMS30919E0027A Cover Assembly, 26LC2 BRAND 30909E0021 LG30919E0027N Cover Assembly, 26LC2R-ZJ LP61C 26" HIPS 405AF(V0),C/SKD-DMS30919E0027B Cover Assembly, 26LC2 BRAND 30909E0021 26LC2R -ZJ CSKD6304FAU020B LCD,Module-TFT, T260XW02-V5 DRIVER 26.0INCH 1280X768 550CD COLOR - - - -3809900134C Cover Assembly, 26LC2 NON LG BRAND 405AF-DMS3809900134A Cover Assembly, 26LC2 NON LG BRAND3809900134D Cover Assembly, 26LC2 NON LG BRAND 405AF(C/SKD)-DMS3809900134B Cover Assembly, 26LC2 NON LG BRAND CSKD3043900029A Base Assembly, 26LC2R 3043900029A STAND TOTAL ASSY3043900026E Base Assembly, 32LC2R NONE STAND BOTTOM C/SKD WITH PRINTING3043900029B Base Assembly, 26LC2R 3043900029A STAND BODY ASSY C/SKD68719ST934A PCB Assembly,Sub, SUB T.T LP61A 26LC2R ZJ LOCAL49519S0021B Plate Assembly, FRAME 26LC2 BRAND(AUO MODULE)49519S0021D Plate Assembly, FRAME 26LC2 BRAND(AUO MODULE) CSKD68719STA75A PCB Assembly,Sub, SUB T.T LP61C 26LC2R CJ(AUO) GUMI MFGEBR30397401 PCB Assembly,Sub, SUB PAKING LP61C 26LC2R TJ SIDE AV SKD6709900016A Power Supply Assembly, FREE H3/E2 LCD MODEL LCD LG ELECTRONICS LB LC33139L2017A Main Total Assembly, 26LC2R(AUO) BRAND LC61A -DMS33139L2017C Main Total Assembly, 26LC2R(AUO) BRAND LC61C for China Language support49519S0030B Plate Assembly, REAR SHIELD MAIN B (26LC2R)49519S0030D Plate Assembly, REAR SHIELD MAIN B (26LC2R-TJ) CSKD6400GESF01A Speaker,Fullrange, C112K01K1450 FERRITE 15W 8OHM 93DB 170HZ 116X42X38.5mM LUGEBR30373401 PCB Assembly,Sub, SUB T.T LP61A 32LC2R . Preamp+LED for DMS68719ST940A PCB Assembly,Sub, SUB T.T LP61A 32LC2R ZJ PREAMP+LED4810900046A Bracket, MOLD HIPS COVER 26LC2 AB HIPS 407AF LG BRAND4811900063A Bracket Assembly, COVER 26LC2R LP61A BRACKET ASSY35509K0197A Cover, MOLD HIPS 32LC2 CABLE MANAGEMENT

    010

    020

    030

    040

    050

    060

    070

    080

    090

    100

    110

    120

    130

    140

    150

  • - 33 -

    EXPL

    ODE

    D VI

    EW(32

    LC2R

    )

    010

    020

    050

    070

    080

    090

    100

    030

    150 0

    40

    140

    120

    130

    060

    060

    110

  • - 34 -

    EXPLODED VIEW PARTS LIST(32LC2R)No. PART NO. DESCRIPTION

    30919E0041X Cover Assembly, 32LC2R-TJ LP61C 32" FOR AUSTRALIA MARKET30919E0041A Cover Assembly, 32LC2R-ZJ BRAND 30909E0019A HURRICANE330919E0041F Cover Assembly, 32LC2R-ZJ BRAND 30909E0019A HURRICANE3 C/SKD6304FAU022A LCD,Module-TFT, T315XW01-V5 XGA 31.5INCH 1366X768 500CD COLOR 72% 16/9 1200:1 SPREAD SPECTRUM3809900159Q Cover Assembly, 32LC2R-TJ LP61C 32" FOR AUSTRAIIA MARKET3809900159K Cover Assembly, 32LC2R-TJ NON HURRICANE33809900159L Cover Assembly, 32LC2R-TJ NON HURRICANE3 C/SKD3043900026B Base Assembly, 32LC2D-ND NONE WITH PRINTING3043900026C Base Assembly, 32LC2D NONE STAND NECK C/SKD3043900026E Base Assembly, 32LC2R NONE STAND BOTTOM C/SKD WITH PRINTING49519S0031F Plate Assembly, FRAME H3 32LC2R-ZJ AUO49519S0031J Plate Assembly, FRAME H3 32LC2R-ZJ AUO C/SKD6400GESF01A Speaker,Fullrange, C112K01K1450 FERRITE 15W 8OHM 93DB 170HZ 116X42X38.5mM LUG68719ST892A PCB Assembly,Sub, SUB T.T LP61A 32LC2R Z SIDE AVEBR30375201 PCB Assembly,Sub, SUB T.T LP61A 32LC2R . SIDE AV for DMS6709900016C SMPS,AC/DC, LGLP2637HEP 90.0VTO264.0V 215W 47TO63HZ UL/CSA/SEMKO YY / AT / H&E

    or 6709900016A Power Supply Assembly, FREE H3/E2 LCD MODEL LCD LG ELECTRONICS LB LC33139L3028A Main Total Assembly, 32LC2R(AUO) BRAND LC61A - Non EU33139L3028E Main Total Assembly, 32LC2R(AUO) AUSTRALIA BRAND LP61C33139L3028B Main Total Assembly, 32LC2R(AUO) BRAND LC61A-Southeast Asia(Language China, English)49509K0157F Plate, SHIELD, 32LC2R-TJ H3-M49509K0195A Plate, CASTING AL FRAME SUPPORT 32LC268719ST934A PCB Assembly,Sub, SUB T.T LP61A 26LC2R ZJ LOCALEBR30372601 PCB Assembly,Sub, SUB T.T LP61A 32LC2R . Local for DMS68719ST940A PCB Assembly,Sub, SUB T.T LP61A 32LC2R ZJ PREAMP+LEDEBR30373401 PCB Assembly,Sub, SUB T.T LP61A 32LC2R . Preamp+LED for DMS35509K0199A Cover, MOLD HIPS 32LC2 REAR STAND SUPPORTER35509K0197A Cover, MOLD HIPS 32LC2 CABLE MANAGEMENT

    010

    020

    030

    040

    050

    060

    070

    080

    090

    100

    110

    120

    130

    140

    150

  • - 35 -

    DATE: 2006. 03. 25. *S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

    C1001 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C1003 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C1007 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C1009 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C1010 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C1017 0CE477WF6DC MVK10TP16VC470M 470uF 20% 1C1018 0CE227WF6DC MVK8.0TP16VC220M 220uF 20%C1019 0CE477WF6DC MVK10TP16VC470M 470uF 20% 1C1021 0CE227WF6DC MVK8.0TP16VC220M 220uF 20%C1031 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C1038 0CE477WF6DC MVK10TP16VC470M 470uF 20% 1C1040 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C1046 0CE477WF6DC MVK10TP16VC470M 470uF 20% 1C1047 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C1048 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C1064 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C1065 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C1066 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C1068 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C1070 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C1071 0CE227WF6DC MVK8.0TP16VC220M 220uF 20%C1074 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C160 0CE227WF6DC MVK8.0TP16VC220M 220uF 20%C161 0CE227WF6DC MVK8.0TP16VC220M 220uF 20%C170 0CE106WH6DC MVK5.0TP25VC10M 10uF 20% 25C171 0CE106WH6DC MVK5.0TP25VC10M 10uF 20% 25C313 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C340 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C343 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C345 0CE226WF6DC MVK5.0TP16VC22M 22uF 20% 16C346 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C401 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C500 0CE477WF6DC MVK10TP16VC470M 470uF 20% 1C502 0CE477WF6DC MVK10TP16VC470M 470uF 20% 1C503 0CE475SK6DC VMV475M050S0ANB010 4.7uF 20C513 0CE477WF6DC MVK10TP16VC470M 470uF 20% 1C519 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C523 0CE476WK6DC MVK8.0TP50VC47M 47uF 20% 50C525 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C629 0CE475WJ6DC MVK4.0TP35VC4.7M 4.7uF 20%C637 0CE335WK6D8 MVK4.0TP50VC3.3M 3.3uF 20%C657 0CE226WF6DC MVK5.0TP16VC22M 22uF 20% 16C658 0CE226WF6DC MVK5.0TP16VC22M 22uF 20% 16C659 0CE226WF6DC MVK5.0TP16VC22M 22uF 20% 16C660 0CE226WF6DC MVK5.0TP16VC22M 22uF 20% 16C676 0CE226WF6DC MVK5.0TP16VC22M 22uF 20% 16C677 0CE226WF6DC MVK5.0TP16VC22M 22uF 20% 16C682 0CE226WF6DC MVK5.0TP16VC22M 22uF 20% 16C683 0CE226WF6DC MVK5.0TP16VC22M 22uF 20% 16C684 0CE226WF6DC MVK5.0TP16VC22M 22uF 20% 16C685 0CE226WF6DC MVK5.0TP16VC22M 22uF 20% 16C686 0CE226WF6DC MVK5.0TP16VC22M 22uF 20% 16

    DATE: 2006. 03. 25. *S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

    C719 0CE226WF6DC MVK5.0TP16VC22M 22uF 20% 16C727 0CE226WF6DC MVK5.0TP16VC22M 22uF 20% 16C733 0CE226WF6DC MVK5.0TP16VC22M 22uF 20% 16C743 0CE226WF6DC MVK5.0TP16VC22M 22uF 20% 16C744 0CE226WF6DC MVK5.0TP16VC22M 22uF 20% 16C756 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C757 0CE106WH6DC MVK5.0TP25VC10M 10uF 20% 25C758 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C759 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C760 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C761 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C762 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C763 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C800 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C802 0CE226WF6DC MVK5.0TP16VC22M 22uF 20% 16C828 0CE107WK6DC MVK10TP50VC100M 100uF 20% 5C860 0CE227WJ6DC MVK10TP35VC220M 220uF 20% 3C861 0CE227WJ6DC MVK10TP35VC220M 220uF 20% 3C863 0CE106WH6DC MVK5.0TP25VC10M 10uF 20% 25C868 0CE475WJ6DC MVK4.0TP35VC4.7M 4.7uF 20%C869 0CE475WJ6DC MVK4.0TP35VC4.7M 4.7uF 20%C912 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C917 0CE477WF6DC MVK10TP16VC470M 470uF 20% 1C922 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C931 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C932 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C933 0CE477WF6DC MVK10TP16VC470M 470uF 20% 1C935 0CE477WF6DC MVK10TP16VC470M 470uF 20% 1C939 0CE477WF6DC MVK10TP16VC470M 470uF 20% 1C946 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C947 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C948 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C951 0CE477WF6DC MVK10TP16VC470M 470uF 20% 1C953 0CE477WF6DC MVK10TP16VC470M 470uF 20% 1C955 0CE107WF6DC MVK6.3TP16VC100M 100uF 20%C978 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C979 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C980 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C981 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C982 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C983 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C984 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C985 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C986 0CE476WF6DC MVK6.3TP16VC47M 47uF 20% 16C988 0CE106WH6DC MVK5.0TP25VC10M 10uF 20% 25C1016 0CE477EJ618 KMG5.0TP35VB470M 470uF 20%C1020 0CE477EJ618 KMG5.0TP35VB470M 470uF 20%C1000 0CK104CK56A 0603B104K500CT 100nF 10% 50C1002 0CK104CK56A 0603B104K500CT 100nF 10% 50C1004 0CK104CK56A 0603B104K500CT 100nF 10% 50C1005 0CK104CK56A 0603B104K500CT 100nF 10% 50C1006 0CK103CK56A 0603B103K500CT 10nF 10% 50VC1008 0CK103CK56A 0603B103K500CT 10nF 10% 50VC1011 0CK103CK56A 0603B103K500CT 10nF 10% 50V

    REPLACEMENT PARTS LIST

    MAIN BOARDCAPACITOR

    For Capacitor & Resistors, thecharactors at 2nd and 3rd digit in theP/No. means as follows;

    CC, CX, CK, CN, CH : CeramicCQ : PolyestorCE : ElectrolyticCF : Fixed Film

    RD : Carbon FilmRS : Metal Oxide FilmRN : Metal FilmRH : CHIP, Metal Glazed(Chip)RR : Drawing

  • - 36 -

    DATE: 2006. 03. 25. *S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

    C1012 0CK104CK56A 0603B104K500CT 100nF 10% 50C1013 0CK104CK56A 0603B104K500CT 100nF 10% 50C1014 0CK104CK56A 0603B104K500CT 100nF 10% 50C1015 0CK104CK56A 0603B104K500CT 100nF 10% 50C1022 0CK104CK56A 0603B104K500CT 100nF 10% 50C1023 0CK104CK56A 0603B104K500CT 100nF 10% 50C1024 0CK104CK56A 0603B104K500CT 100nF 10% 50C1025 0CK104CK56A 0603B104K500CT 100nF 10% 50C1026 0CK103CK56A 0603B103K500CT 10nF 10% 50VC1027 0CK104CK56A 0603B104K500CT 100nF 10% 50C1029 0CK103CK56A 0603B103K500CT 10nF 10% 50VC1036 0CK104CK56A 0603B104K500CT 100nF 10% 50C1037 0CK104CK56A 0603B104K500CT 100nF 10% 50C1039 0CK103CK56A 0603B103K500CT 10nF 10% 50VC1043 0CK104CK56A 0603B104K500CT 100nF 10% 50C1045 0CK104CK56A 0603B104K500CT 100nF 10% 50C1050 0CK104CK56A 0603B104K500CT 100nF 10% 50C1051 0CK104CK56A 0603B104K500CT 100nF 10% 50C1052 0CK104CK56A 0603B104K500CT 100nF 10% 50C1054 0CK104CK56A 0603B104K500CT 100nF 10% 50C1056 0CK103CK56A 0603B103K500CT 10nF 10% 50VC1057 0CK103CK56A 0603B103K500CT 10nF 10% 50VC1058 0CK103CK56A 0603B103K500CT 10nF 10% 50VC1061 0CK103CK56A 0603B103K500CT 10nF 10% 50VC1069 0CK104CK56A 0603B104K500CT 100nF 10% 50C1072 0CK104CK56A 0603B104K500CT 100nF 10% 50C1073 0CK103CK56A 0603B103K500CT 10nF 10% 50VC159 0CC102CK41A C1608C0G1H102JT 1nF 5% 50VC162 0CC102CK41A C1608C0G1H102JT 1nF 5% 50VC163 0CK103CK56A 0603B103K500CT 10nF 10% 50VC164 0CK103CK56A 0603B103K500CT 10nF 10% 50VC309 0CK103CK56A 0603B103K500CT 10nF 10% 50VC310 0CK103CK56A 0603B103K500CT 10nF 10% 50VC311 0CC470CK41A C1608C0G1H470JT 47pF 5% 50VC312 0CK104CK56A 0603B104K500CT 100nF 10% 50C316 0CC120CK41A C1608C0G1H120JT 12pF 5% 50VC317 0CC120CK41A C1608C0G1H120JT 12pF 5% 50VC337 0CK104CK56A 0603B104K500CT 100nF 10% 50C338 0CK104CK56A 0603B104K500CT 100nF 10% 50C339 0CK104CK56A 0603B104K500CT 100nF 10% 50C350 0CK103CK56A 0603B103K500CT 10nF 10% 50VC351 0CK104CK56A 0603B104K500CT 100nF 10% 50C352 0CK104CK56A 0603B104K500CT 100nF 10% 50C400 0CK104CK56A 0603B104K500CT 100nF 10% 50C406 0CK104CK56A 0603B104K500CT 100nF 10% 50C407 0CK104CK56A 0603B104K500CT 100nF 10% 50C408 0CK104CK56A 0603B104K500CT 100nF 10% 50C409 0CK104CK56A 0603B104K500CT 100nF 10% 50C410 0CK102CK56A 0603B102K500CT 1nF 10% 50VC411 0CK102CK56A 0603B102K500CT 1nF 10% 50VC412 0CK104CK56A 0603B104K500CT 100nF 10% 50C413 0CK104CK56A 0603B104K500CT 100nF 10% 50C414 0CK104CK56A 0603B104K500CT 100nF 10% 50C415 0CK104CK56A 0603B104K500CT 100nF 10% 50C416 0CK104CK56A 0603B104K500CT 100nF 10% 50C417 0CK102CK56A 0603B102K500CT 1nF 10% 50VC419 0CK104CK56A 0603B104K500CT 100nF 10% 50C420 0CK102CK56A 0603B102K500CT 1nF 10% 50VC421 0CK104CK56A 0603B104K500CT 100nF 10% 50C424 0CK104CK56A 0603B104K500CT 100nF 10% 50C425 0CK104CK56A 0603B104K500CT 100nF 10% 50C426 0CK104CK56A 0603B104K500CT 100nF 10% 50

    DATE: 2006. 03. 25. *S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

    C506 0CK103CK56A 0603B103K500CT 10nF 10% 50VC507 0CK103CK56A 0603B103K500CT 10nF 10% 50VC508 0CC270CK41A C1608C0G1H270JT 27pF 5% 50VC509 0CC270CK41A C1608C0G1H270JT 27pF 5% 50VC511 0CK103CK56A 0603B103K500CT 10nF 10% 50VC512 0CC101CK41A C1608C0G1H101JT 100pF 5% 50C514 0CK273CK56A 0603B273K500CT 27nF 10% 50VC515 0CK103CK56A 0603B103K500CT 10nF 10% 50VC516 0CK104CK56A 0603B104K500CT 100nF 10% 50C517 0CK273CK56A 0603B273K500CT 27nF 10% 50VC518 0CK104CK56A 0603B104K500CT 100nF 10% 50C520 0CK104CK56A 0603B104K500CT 100nF 10% 50C521 0CC271CK41A C1608C0G1H271JT 270pF 5% 50C524 0CK104CK56A 0603B104K500CT 100nF 10% 50C638 0CK104CK56A 0603B104K500CT 100nF 10% 50C643 0CK332CK56A C1608X7R1H332KT 3.3nF 10% 5C645 0CK332CK56A C1608X7R1H332KT 3.3nF 10% 5C649 0CK104CK56A 0603B104K500CT 100nF 10% 50C652 0CC560CK41A C1608C0G1H560JT 56pF 5% 50VC662 0CK225DK94A CL21F225ZBFNNNE 2.2uF -20TOC663 0CK104CK56A 0603B104K500CT 100nF 10% 50C664 0CK104CK56A 0603B104K500CT 100nF 10% 50C665 0CK225DK94A CL21F225ZBFNNNE 2.2uF -20TOC666 0CK225DD66A LMK212JB225MG-T 2.2uF 20% 1C687 0CK104CK56A 0603B104K500CT 100nF 10% 50C693 0CK104CK56A 0603B104K500CT 100nF 10% 50C694 0CK104CK56A 0603B104K500CT 100nF 10% 50C695 0CK104CK56A 0603B104K500CT 100nF 10% 50C696 0CK104CK56A 0603B104K500CT 100nF 10% 50C697 0CK104CK56A 0603B104K500CT 100nF 10% 50C704 0CK104CK56A 0603B104K500CT 100nF 10% 50C705 0CK104CK56A 0603B104K500CT 100nF 10% 50C713 0CK104CK56A 0603B104K500CT 100nF 10% 50C721 0CK104CK56A 0603B104K500CT 100nF 10% 50C726 0CK104CK56A 0603B104K500CT 100nF 10% 50C729 0CK104CK56A 0603B104K500CT 100nF 10% 50C735 0CK104CK56A 0603B104K500CT 100nF 10% 50C739 0CK104CK56A 0603B104K500CT 100nF 10% 50C749 0CK104CK56A 0603B104K500CT 100nF 10% 50C750 0CK225DK94A CL21F225ZBFNNNE 2.2uF -20TOC753 0CK104CK56A 0603B104K500CT 100nF 10% 50C764 0CK106EF56A C3216X7R1C106KT 10uF 10% 16C765 0CK106EF56A C3216X7R1C106KT 10uF 10% 16C766 0CK106EF56A C3216X7R1C106KT 10uF 10% 16C801 0CK103CK56A 0603B103K500CT 10nF 10% 50VC816 0CK225DK94A CL21F225ZBFNNNE 2.2uF -20TOC820 0CK225DK94A CL21F225ZBFNNNE 2.2uF -20TOC827 0CC471CK41A C1608C0G1H471JT 470pF 5% 50C829 0CC471CK41A C1608C0G1H471JT 470pF 5% 50C830 0CK103CK56A 0603B103K500CT 10nF 10% 50VC836 0CK104CK56A 0603B104K500CT 100nF 10% 50C838 0CK104CK56A 0603B104K500CT 100nF 10% 50C839 0CK104CK56A 0603B104K500CT 100nF 10% 50C840 0CK102CK56A 0603B102K500CT 1nF 10% 50VC842 0CK102CK56A 0603B102K500CT 1nF 10% 50VC845 0CK474CH94A 0603F474Z250CT 470nF -20TO+C848 0CK104CK56A 0603B104K500CT 100nF 10% 50C849 0CK474CH94A 0603F474Z250CT 470nF -20TO+C850 0CK104CK56A 0603B104K500CT 100nF 10% 50C851 0CK105CF94A 0603F105Z160CT 1uF -20TO+80C853 0CK103CK56A 0603B103K500CT 10nF 10% 50VC856 0CK105CF94A 0603F105Z160CT 1uF -20TO+80

  • DATE: 2006. 03. 25. *S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

    C859 0CK105CF94A 0603F105Z160CT 1uF -20TO+80C862 0CK105CF94A 0603F105Z160CT 1uF -20TO+80C866 0CK682CK51A C1608Y5P1H682KT 6.8nF 10% 5C867 0CK682CK51A C1608Y5P1H682KT 6.8nF 10% 5C906 0CK104CK56A 0603B104K500CT 100nF 10% 50C908 0CK474CH94A 0603F474Z250CT 470nF -20TO+C916 0CK104CK56A 0603B104K500CT 100nF 10% 50C919 0CK104CK56A 0603B104K500CT 100nF 10% 50C921 0CK103CK56A 0603B103K500CT 10nF 10% 50VC930 0CK104CK56A 0603B104K500CT 100nF 10% 50C934 0CK104CK56A 0603B104K500CT 100nF 10% 50C936 0CK104CK56A 0603B104K500CT 100nF 10% 50C937 0CK104CK56A 0603B104K500CT 100nF 10% 50C938 0CK104CK56A 0603B104K500CT 100nF 10% 50C941 0CK103CK56A 0603B103K500CT 10nF 10% 50VC942 0CK103CK56A 0603B103K500CT 10nF 10% 50VC943 0CK103CK56A 0603B103K500CT 10nF 10% 50VC945 0CK104CK56A 0603B104K500CT 100nF 10% 50C949 0CK103CK56A 0603B103K500CT 10nF 10% 50VC950 0CK104CK56A 0603B104K500CT 100nF 10% 50C957 0CK104CK56A 0603B104K500CT 100nF 10% 50C958 0CK104CK56A 0603B104K500CT 100nF 10% 50C959 0CK104CK56A 0603B104K500CT 100nF 10% 50C960 0CK104CK56A 0603B104K500CT 100nF 10% 50C961 0CK104CK56A 0603B104K500CT 100nF 10% 50C962 0CK104CK56A 0603B104K500CT 100nF 10% 50C963 0CK104CK56A 0603B104K500CT 100nF 10% 50C964 0CK104CK56A 0603B104K500CT 100nF 10% 50C965 0CK104CK56A 0603B104K500CT 100nF 10% 50C967 0CK103CK56A 0603B103K500CT 10nF 10% 50VC968 0CK103CK56A 0603B103K500CT 10nF 10% 50VC969 0CK103CK56A 0603B103K500CT 10nF 10% 50VC970 0CK103CK56A 0603B103K500CT 10nF 10% 50VC972 0CK103CK56A 0603B103K500CT 10nF 10% 50VC973 0CK103CK56A 0603B103K500CT 10nF 10% 50VC974 0CK103CK56A 0603B103K500CT 10nF 10% 50VC975 0CK103CK56A 0603B103K500CT 10nF 10% 50VC976 0CK103CK56A 0603B103K500CT 10nF 10% 50VC1059 0CK104CK56A 0603B104K500CT 100nF 10% 50C1063 0CK103CK56A 0603B103K500CT 10nF 10% 50VC172 0CK682CK51A C1608Y5P1H682KT 6.8nF 10% 5C173 0CK682CK51A C1608Y5P1H682KT 6.8nF 10% 5C174 0CK682CK51A C1608Y5P1H682KT 6.8nF 10% 5C175 0CK682CK51A C1608Y5P1H682KT 6.8nF 10% 5C332 0CK104CK56A 0603B104K500CT 100nF 10% 50C333 0CK104CK56A 0603B104K500CT 100nF 10% 50C334 0CK104CK56A 0603B104K500CT 100nF 10% 50C335 0CK104CK56A 0603B104K500CT 100nF 10% 50C336 0CK104CK56A 0603B104K500CT 100nF 10% 50C347 0CK104CF56A 0603B104K160CT 100nF 10% 16C429 0CK822CK46A 0603B822J500CT 8.2nF 5% 50VC430 0CK823CF56A 0603B823K160CT 82nF 10% 16VC522 0CC271CK41A C1608C0G1H271JT 270pF 5% 50C609 0CK104CK56A 0603B104K500CT 100nF 10% 50C610 0CK104CK56A 0603B104K500CT 100nF 10% 50C611 0CK104CK56A 0603B104K500CT 100nF 10% 50C612 0CK104CK56A 0603B104K500CT 100nF 10% 50C613 0CK104CK56A 0603B104K500CT 100nF 10% 50C614 0CK104CK56A 0603B104K500CT 100nF 10% 50C615 0CK104CK56A 0603B104K500CT 100nF 10% 50C616 0CK104CK56A 0603B104K500CT 100nF 10% 50C617 0CK104CK56A 0603B104K500CT 100nF 10% 50

    DATE: 2006. 03. 25. *S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

    C618 0CK104CK56A 0603B104K500CT 100nF 10% 50C619 0CK104CK56A 0603B104K500CT 100nF 10% 50C620 0CK104CK56A 0603B104K500CT 100nF 10% 50C621 0CK104CK56A 0603B104K500CT 100nF 10% 50C622 0CK104CK56A 0603B104K500CT 100nF 10% 50C623 0CK104CK56A 0603B104K500CT 100nF 10% 50C624 0CK104CK56A 0603B104K500CT 100nF 10% 50C625 0CK104CK56A 0603B104K500CT 100nF 10% 50C626 0CK103CK56A 0603B103K500CT 10nF 10% 50VC627 0CK474CH94A 0603F474Z250CT 470nF -20TO+C628 0CK474CH94A 0603F474Z250CT 470nF -20TO+C630 0CK474CH94A 0603F474Z250CT 470nF -20TO+C631 0CK474CH94A 0603F474Z250CT 470nF -20TO+C632 0CK474CH94A 0603F474Z250CT 470nF -20TO+C633 0CK103CK56A 0603B103K500CT 10nF 10% 50VC634 0CK474CH94A 0603F474Z250CT 470nF -20TO+C635 0CK474CH94A 0603F474Z250CT 470nF -20TO+C636 0CK474CH94A 0603F474Z250CT 470nF -20TO+C647 0CK332CK56A C1608X7R1H332KT 3.3nF 10% 5C648 0CK332CK56A C1608X7R1H332KT 3.3nF 10% 5C650 0CK682CK51A C1608Y5P1H682KT 6.8nF 10% 5C651 0CC560CK41A C1608C0G1H560JT 56pF 5% 50VC653 0CK682CK51A C1608Y5P1H682KT 6.8nF 10% 5C654 0CK103CK56A 0603B103K500CT 10nF 10% 50VC655 0CC220CK41A C1608C0G1H220JT 22pF 5% 50VC661 0CK104CK56A 0603B104K500CT 100nF 10% 50C673 0CC220CK41A C1608C0G1H220JT 22pF 5% 50VC674 0CC220CK41A C1608C0G1H220JT 22pF 5% 50VC688 0CK104CK56A 0603B104K500CT 100nF 10% 50C803 0CK105CF94A 0603F105Z160CT 1uF -20TO+80C804 0CK105CF94A 0603F105Z160CT 1uF -20TO+80C806 0CK105CF94A 0603F105Z160CT 1uF -20TO+80C807 0CK105CF94A 0603F105Z160CT 1uF -20TO+80C821 0CK475EF67A C3216X5R1C475MT 4.7uF 20% 1C822 0CK475EF67A C3216X5R1C475MT 4.7uF 20% 1C823 0CK475EF67A C3216X5R1C475MT 4.7uF 20% 1C824 0CK475EF67A C3216X5R1C475MT 4.7uF 20% 1C825 0CK475EF67A C3216X5R1C475MT 4.7uF 20% 1C831 0CK475EF67A C3216X5R1C475MT 4.7uF 20% 1C832 0CK475EF67A C3216X5R1C475MT 4.7uF 20% 1C833 0CK475EF67A C3216X5R1C475MT 4.7uF 20% 1C834 0CK475EF67A C3216X5R1C475MT 4.7uF 20% 1C835 0CK475EF67A C3216X5R1C475MT 4.7uF 20% 1C854 0CK224CF56A 0603B224K160CT 220nF 10% 16C855 0CK224CF56A 0603B224K160CT 220nF 10% 16C857 0CK105CF94A 0603F105Z160CT 1uF -20TO+80C858 0CK105CF94A 0603F105Z160CT 1uF -20TO+80C864 0CK224CF56A 0603B224K160CT 220nF 10% 16C865 0CK224CF56A 0603B224K160CT 220nF 10% 16C915 0CK474CH94A 0603F474Z250CT 470nF -20TO+C926 0CK104CK56A 0603B104K500CT 100nF 10% 50C927 0CK104CK56A 0603B104K500CT 100nF 10% 50C928 0CK103CK56A 0603B103K500CT 10nF 10% 50VC929 0CK103CK56A 0603B103K500CT 10nF 10% 50VC989 0CK103CK56A 0603B103K500CT 10nF 10% 50V

    D800 0DD184009AA KDS184 KDS184 TP KEC - 85VD801 0DD184009AA KDS184 KDS184 TP KEC - 85VD400 0DD184009AA KDS184 KDS184 TP KEC - 85VD700 0DD184009AA KDS184 KDS184 TP KEC - 85V

    - 37 -

    DIODEs

  • DATE: 2006. 03. 25. *S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

    D905 0DD200009AF RU2M 400V 1.2V 10UA 20A 400D906 0DD200009AF RU2M 400V 1.2V 10UA 20A 400D907 0DD200009AF RU2M 400V 1.2V 10UA 20A 400D1001 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND1002 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND1003 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND116 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND117 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND118 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND119 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND120 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND121 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND124 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND125 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND126 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND127 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND128 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND900 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND902 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND903 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND500 0DS113379BA 1SS133 1200MV 90V 400MA 600D300 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND302 0DS226009AA KDS226 1.2V 85V 300MA 2A 4ND303 0DS226009AA KDS226 1.2V 85V 300MA 2A 4NZD300 0DR050008AA SD05.TC - 6V 14.5V 24A 350WZD312 0DR050008AA SD05.TC - 6V 14.5V 24A 350WZD301 0DR050008AA SD05.TC - 6V 14.5V 24A 350WZD303 0DR050008AA SD05.TC - 6V 14.5V 24A 350WZD304 0DR050008AA SD05.TC - 6V 14.5V 24A 350WZD305 0DR050008AA SD05.TC - 6V 14.5V 24A 350WZD308 0DR050008AA SD05.TC - 6V 14.5V 24A 350WZD1000 0DZKE00048A KDZ8.2V 8.2V 7.7TO8.7V 20OH

    IC303 0ISTL00031A MC74HC4066ADR2G MC74HC4066AIC801 0IPRP00700A TPA3100D2PHPR 10TO26V - . 2IC800 0IPRP00665A TEA6420D 8TO10.2V 8mA - SOIC301 0IPH741400E 74HC14D 2TO6V 0.002mA SCHMIIC602 0IFA742530B 74ACT253SC 4.5TO5.5V 0.004mIC802 0IPRP00743A MAD4868A 3TO5.25V - - PQFPIC300 0ICS240213A CAT24WC02J-TE13 2KBIT 256X8IC400 0IMMRAL014C AT24C02N-10SU-2.7 2KBIT 256IC603 0IMMRAL025A AT24C32AN-10SI-2.7 32KBIT 4IC1001 0IPMGKE030A KIA78R05F 6TO12V 5V 8W DPAKIC1002 0IPMG00027A SC156515M-1.8TR 2.2TO5.5V 1IC900 0IMCRRH001A BA033FP-E2 4.3TO25V 3.3V 1WIC902 0IPMG00027A SC156515M-1.8TR 2.2TO5.5V 1IC903 0IMCRRH001A BA033FP-E2 4.3TO25V 3.3V 1WIC601 0IPRP00689A VCT6973G-FA-B2-000 0.3TO9.0IC401 0IPRP00701A "AD9381KSTZ 3.15TO3.47,1.7TO"IC302 0IPRP00009A ICL3232CBNZ 3.0TO5.5 - SSOPIC600 0IFA752700A KA75270Z 2.55TO2.85V - 200MIC1003 0IMCRFA010A KA7809R 11.5TO24V 9V 150W DIC500 0IPMGON013B MC34063ADR2G 3TO40V 40V 625

    L1004 6140VB0004B LN-15A1 26uH - - 12X9MM LEAL910 6140VB0004B LN-15A1 26uH - - 12X9MM LEAL1000 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL1001 6210TCE001G HH-1M3216-501JT 500OHM 3.2X

    DATE: 2006. 03. 25. *S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

    L1002 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL1007 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL1008 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL1010 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL1011 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL1012 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL1015 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL1017 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL1018 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL112 6200J00005F HB-1M1608-102JT 1000OHM 1.6L113 6200J00005F HB-1M1608-102JT 1000OHM 1.6L114 6200J00005F HB-1M1608-102JT 1000OHM 1.6L115 6200J00005F HB-1M1608-102JT 1000OHM 1.6L300 6200JB8010L MLB-201209-1000L-N2 1000OHML301 6200JB8010L MLB-201209-1000L-N2 1000OHML303 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL305 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL401 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL402 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL500 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL501 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL502 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL806 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL904 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL913 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL914 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL915 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL916 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL917 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL918 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL919 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL920 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL921 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL923 6210TCE001P HB-1S2012-121JT 120OHM 2X1.AR400 6210TCE002B HB-4M3216-121JT 120OHM 3.2XAR401 6210TCE002B HB-4M3216-121JT 120OHM 3.2XAR402 6210TCE002B HB-4M3216-121JT 120OHM 3.2XAR403 6210TCE002B HB-4M3216-121JT 120OHM 3.2XAR404 6210TCE002B HB-4M3216-121JT 120OHM 3.2XAR405 6210TCE002B HB-4M3216-121JT 120OHM 3.2XAR600 6210TCE002B HB-4M3216-121JT 120OHM 3.2XAR601 6210TCE002B HB-4M3216-121JT 120OHM 3.2XAR602 6210TCE002B HB-4M3216-121JT 120OHM 3.2XL1016 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL302 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL304 6210TCE001E HB-1M2012-800JT 80OHM 2X1.2L306 6210TCE001P HB-1S2012-121JT 120OHM 2X1.L307 6210TCE001P HB-1S2012-121JT 120OHM 2X1.L308 6210TCE001P HB-1S2012-121JT 120OHM 2X1.L309 6210TCE001P HB-1S2012-121JT 120OHM 2X1.L310 6210TCE001P HB-1S2012-121JT 120OHM 2X1.L400 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL813 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL814 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL815 6210TCE001P HB-1S2012-121JT 120OHM 2X1.L816 6210TCE001P HB-1S2012-121JT 120OHM 2X1.L817 6210TCE001P HB-1S2012-121JT 120OHM 2X1.L818 6210TCE001P HB-1S2012-121JT 120OHM 2X1.L819 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL820 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL905 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL906 6210TCE001G HH-1M3216-501JT 500OHM 3.2X

    - 38 -

    IC

    COIL & CORE & INDUCTOR

  • DATE: 2006. 03. 25. *S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

    L924 6210TCE001G HH-1M3216-501JT 500OHM 3.2XL118 0LCML00020G MLI-201209-3R3K 3.3UH 10% -L119 0LCML00020G MLI-201209-3R3K 3.3UH 10% -L120 0LCML00020G MLI-201209-3R3K 3.3UH 10% -L121 0LCML00020G MLI-201209-3R3K 3.3UH 10% -L804 0LCML00020C MLI-201212-100K 10UH 10% -L805 0LCML00020C MLI-201212-100K 10UH 10% -L503 0LCML00020G MLI-201209-3R3K 3.3UH 10% -L504 0LC6461201A D75C-646CY-121M=P3 120UH 20L801 6140VR0008A SLF12575T-330M3R2 33UH 20%L802 6140VR0008A SLF12575T-330M3R2 33UH 20%L808 6140VR0008A SLF12575T-330M3R2 33UH 20%L809 6140VR0008A SLF12575T-330M3R2 33UH 20%

    Q401 0TR830009BA BSS83 N-CHANNEL MOSFET 10VQ402 0TR830009BA BSS83 N-CHANNEL MOSFET 10VQ508 0TR830009BA BSS83 N-CHANNEL MOSFET 10VQ509 0TR830009BA BSS83 N-CHANNEL MOSFET 10VQ108 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q109 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q110 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q300 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q400 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q502 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q503 0TR150400BA 2SA1504S(ASY) PNP -5V -50VQ504 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q505 0TR150400BA 2SA1504S(ASY) PNP -5V -50VQ605 0TR102009AM KRA102S PNP -30V - -50V -0.Q606 0TR150400BA 2SA1504S(ASY) PNP -5V -50VQ607 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q608 0TR150400BA 2SA1504S(ASY) PNP -5V -50VQ801 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q802 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q111 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q112 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q113 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q301 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q512 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q513 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q611 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q613 0TR150400BA 2SA1504S(ASY) PNP -5V -50VQ901 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q902 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q903 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q904 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q905 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q906 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q907 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50Q908 0TR387500AA 2SC3875S(ALY) NPN 5V 60V 50

    R525 0RD0331H609 RD-92T1J3R30 3.3OHM 5% 1/2WR1001 0RJ0752D677 MCR03EZPJ750 75OHM 5% 1/10WR1002 0RJ0752D677 MCR03EZPJ750 75OHM 5% 1/10WR1007 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR1011 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR141 0RJ0752D677 MCR03EZPJ750 75OHM 5% 1/10WR149 0RJ2000D677 MCR03EZPJ201 200OHM 5% 1/10R174 0RJ2203D677 MCR03EZPJ224 220KOHM 5% 1/1

    DATE: 2006. 03. 25. *S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

    R175 0RJ2203D677 MCR03EZPJ224 220KOHM 5% 1/1R176 0RJ0752D677 MCR03EZPJ750 75OHM 5% 1/10WR177 0RJ0752D677 MCR03EZPJ750 75OHM 5% 1/10WR178 0RJ0752D677 MCR03EZPJ750 75OHM 5% 1/10WR179 0RJ2203D677 MCR03EZPJ224 220KOHM 5% 1/1R180 0RJ2203D677 MCR03EZPJ224 220KOHM 5% 1/1R181 0RJ0752D677 MCR03EZPJ750 75OHM 5% 1/10WR182 0RJ0752D677 MCR03EZPJ750 75OHM 5% 1/10WR183 0RJ0752D677 MCR03EZPJ750 75OHM 5% 1/10WR184 0RJ0752D677 MCR03EZPJ750 75OHM 5% 1/10WR185 0RJ2203D677 MCR03EZPJ224 220KOHM 5% 1/1R186 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR187 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR188 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR189 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR190 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR191 0RJ0752D677 MCR03EZPJ750 75OHM 5% 1/10WR192 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR193 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR194 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR195 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR196 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR197 0RJ2203D677 MCR03EZPJ224 220KOHM 5% 1/1R198 0RJ0752D677 MCR03EZPJ750 75OHM 5% 1/10WR199 0RJ0752D677 MCR03EZPJ750 75OHM 5% 1/10WR200 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR201 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R204 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R206 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R208 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR209 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR210 0RJ4703D677 MCR03EZPJ474 470KOHM 5% 1/1R211 0RJ4703D677 MCR03EZPJ474 470KOHM 5% 1/1R212 0RJ2203D677 MCR03EZPJ224 220KOHM 5% 1/1R213 0RJ2203D677 MCR03EZPJ224 220KOHM 5% 1/1R214 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR215 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR217 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR218 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR219 0RJ2001D677 MCR03EZPJ202 2KOHM 5% 1/10WR220 0RJ2001D677 MCR03EZPJ202 2KOHM 5% 1/10WR303 0RJ2203D677 MCR03EZPJ224 220KOHM 5% 1/1R304 0RJ2203D677 MCR03EZPJ224 220KOHM 5% 1/1R307 0RJ0752D677 MCR03EZPJ750 75OHM 5% 1/10WR308 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R309 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR310 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR311 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR312 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR313 0RJ2001D677 MCR03EZPJ202 2KOHM 5% 1/10WR314 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR315 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R316 0RJ0752D677 MCR03EZPJ750 75OHM 5% 1/10WR317 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR320 0RJ0752D677 MCR03EZPJ750 75OHM 5% 1/10WR321 0RJ4701D677 MCR03EZPJ472 4.7KOHM 5% 1/1R322 0RJ4701D677 MCR03EZPJ472 4.7KOHM 5% 1/1R323 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R326 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR327 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR328 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR329 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10W

    - 39 -

    RESISTORs

    FET & TRANSISTOR

  • DATE: 2006. 03. 25. *S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

    R330 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR331 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR332 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR333 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR334 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR335 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR338 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R339 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R344 0RJ2002D677 MCR03EZPJ203. 20KOHM 5% 1/1R349 0RJ2202D677 MCR03EZPJ223 22KOHM 5% 1/10R350 0RJ2202D677 MCR03EZPJ223 22KOHM 5% 1/10R351 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR352 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR355 0RJ4700D677 MCR03EZPJ471 470OHM 5% 1/10R358 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR360 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR370 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR372 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR373 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR402 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R404 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR405 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR417 0RJ4702D677 MCR03EZPJ473 47KOHM 5% 1/10R418 0RJ4702D677 MCR03EZPJ473 47KOHM 5% 1/10R423 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R424 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R502 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R503 0RJ0222D677 MCR03EZPJ220 22OHM 5% 1/10WR506 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR507 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR508 0RJ2200D677 MCR03EZPJ221 220OHM 5% 1/10R509 0RJ2200D677 MCR03EZPJ221 220OHM 5% 1/10R510 0RJ4701D677 MCR03EZPJ472 4.7KOHM 5% 1/1R511 0RJ4700D677 MCR03EZPJ471 470OHM 5% 1/10R512 0RJ0822D677 MCR03EZPJ820 82OHM 5% 1/10WR513 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR514 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR515 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R516 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR517 0RJ4701D677 MCR03EZPJ472 4.7KOHM 5% 1/1R521 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR532 0RJ3002D677 MCR03EZPJ303 30KOHM 5% 1/10R533 0RJ2201D677 MCR03EZPJ222 2.2KOHM 5% 1/1R539 0RJ2702D677 MCR03EZPJ273 27KOHM 5% 1/10R540 0RJ7501D677 MCR03EZPJ752 7.5KOHM 5% 1/1R603 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R646 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR656 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R657 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR658 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR673 0RJ6201D677 MCR03EZPJ622 6.2KOHM 5% 1/1R736 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R747 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R748 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R749 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R762 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR763 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR764 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR765 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR766 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR767 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR768 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10W

    DATE: 2006. 03. 25. *S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

    R769 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR771 0RJ2200D677 MCR03EZPJ221 220OHM 5% 1/10R776 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR781 0RJ3001D677 MCR03EZPJ302 3KOHM 5% 1/10WR782 0RJ3001D677 MCR03EZPJ302 3KOHM 5% 1/10WR783 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR784 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR800 0RJ1000D477 MCR03EZPF101 100OHM 1% 1/10R801 0RJ1000D477 MCR03EZPF101 100OHM 1% 1/10R802 0RJ1000D477 MCR03EZPF101 100OHM 1% 1/10R803 0RJ1000D477 MCR03EZPF101 100OHM 1% 1/10R804 0RJ1000D477 MCR03EZPF101 100OHM 1% 1/10R805 0RJ1000D477 MCR03EZPF101 100OHM 1% 1/10R806 0RJ1000D477 MCR03EZPF101 100OHM 1% 1/10R807 0RJ1000D477 MCR03EZPF101 100OHM 1% 1/10R808 0RJ1000D477 MCR03EZPF101 100OHM 1% 1/10R809 0RJ1000D477 MCR03EZPF101 100OHM 1% 1/10R810 0RJ1000D477 MCR03EZPF101 100OHM 1% 1/10R811 0RJ1000D477 MCR03EZPF101 100OHM 1% 1/10R812 0RJ1000D477 MCR03EZPF101 100OHM 1% 1/10R813 0RJ1000D477 MCR03EZPF101 100OHM 1% 1/10R816 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R822 0RJ2001D677 MCR03EZPJ202 2KOHM 5% 1/10WR823 0RJ2001D677 MCR03EZPJ202 2KOHM 5% 1/10WR828 0RJ4703D677 MCR03EZPJ474 470KOHM 5% 1/1R829 0RJ4703D677 MCR03EZPJ474 470KOHM 5% 1/1R833 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR834 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR838 0RJ2001D677 MCR03EZPJ202 2KOHM 5% 1/10WR839 0RJ2001D677 MCR03EZPJ202 2KOHM 5% 1/10WR843 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R844 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R847 0RJ1003D677 MCR03EZPJ104 100KOHM 5% 1/1R848 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R849 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR850 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR851 0RJ4701D677 MCR03EZPJ472 4.7KOHM 5% 1/1R852 0RJ4701D677 MCR03EZPJ472 4.7KOHM 5% 1/1R856 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR857 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR861 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR865 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR866 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR867 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR868 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR872 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR876 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR900 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R902 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR909 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR910 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR916 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R918 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R919 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R922 0RJ1102D677 MCR03EZPJ113 11KOHM 5% 1/10R923 0RJ2002D677 MCR03EZPJ203. 20KOHM 5% 1/1R926 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR927 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R930 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR932 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR933 0RH0000D622 MCR10EZHJ000 0OHM 5% 1/8W 2R934 0RH0000D622 MCR10EZHJ000 0OHM 5% 1/8W 2

    - 40 -

  • DATE: 2006. 03. 25. *S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

    R935 0RH0000D622 MCR10EZHJ000 0OHM 5% 1/8W 2R937 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR938 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WC644 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WC646 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WL922 0RH0332D622 MCR10EZHJ330 33OHM 5% 1/8WR1000 0RJ1201D677 MCR03EZPJ122 1.2KOHM 5% 1/1R1003 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R1004 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R1005 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R1006 0RJ2002D677 MCR03EZPJ203. 20KOHM 5% 1/1R1009 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR222 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR223 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR224 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR225 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR226 0RJ4701D677 MCR03EZPJ472 4.7KOHM 5% 1/1R227 0RJ4701D677 MCR03EZPJ472 4.7KOHM 5% 1/1R228 0RJ4701D677 MCR03EZPJ472 4.7KOHM 5% 1/1R229 0RJ4701D677 MCR03EZPJ472 4.7KOHM 5% 1/1R300 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR301 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR302 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR306 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR318 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R319 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R343 0RJ2002D677 MCR03EZPJ203. 20KOHM 5% 1/1R345 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R346 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R347 0RJ3001D677 MCR03EZPJ302 3KOHM 5% 1/10WR348 0RJ3001D677 MCR03EZPJ302 3KOHM 5% 1/10WR361 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R362 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R366 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R367 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R380 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR381 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR382 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR383 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR384 0RJ4701D677 MCR03EZPJ472 4.7KOHM 5% 1/1R386 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR387 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR388 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR389 0RJ4700D677 MCR03EZPJ471 470OHM 5% 1/10R401 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR406 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R407 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R421 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R422 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R425 0RJ4990D477 MCR03EZPF4990 499OHM 1% 1/1R426 0RJ0222D677 MCR03EZPJ220 22OHM 5% 1/10WR427 0RJ0222D677 MCR03EZPJ220 22OHM 5% 1/10WR428 0RJ0222D677 MCR03EZPJ220 22OHM 5% 1/10WR433 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R434 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R435 0RJ0222D677 MCR03EZPJ220 22OHM 5% 1/10WR436 0RJ0222D677 MCR03EZPJ220 22OHM 5% 1/10WR437 0RJ0222D677 MCR03EZPJ220 22OHM 5% 1/10WR438 0RJ0222D677 MCR03EZPJ220 22OHM 5% 1/10WR441 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R442 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R451 0RJ1501D677 MCR03EZPJ152 1.5KOHM 5% 1/1

    DATE: 2006. 03. 25. *S *AL LOC. NO. PART NO. DESCRIPTION / SPECIFICATION

    R519 0RJ2700D677 MCR03EZPJ271 270OHM 5% 1/10R520 0RJ2200D677 MCR03EZPJ221 220OHM 5% 1/10R528 0RJ1800D677 MCR03EZPJ181 180OHM 5% 1/10R534 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR535 0RJ4702D677 MCR03EZPJ473 47KOHM 5% 1/10R536 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR600 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR601 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R615 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR616 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR617 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR620 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R621 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR627 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR628 0RJ0000D677 MCR03EZPJ000 0OHM 5% 1/10WR629 0RJ1500D677 MCR03EZPJ151 150OHM 5% 1/10R630 0RJ4700D677 MCR03EZPJ471 470OHM 5% 1/10R631 0RJ1500D677 MCR03EZPJ151 150OHM 5% 1/10R632 0RJ1802D677 MCR03EZPJ183 18KOHM 5% 1/10R633 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R634 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R635 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R636 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R637 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R638 0RJ1001D677 MCR03EZPJ102 1KOHM 5% 1/10WR640 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R645 0RJ1000D677 MCR03EZPJ101 100OHM 5% 1/10R647 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R648 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R649 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R650 0RJ1002D677 MCR03EZPJ103 10KOHM 5% 1/10R651 0RJ1002D677 MCR03EZPJ103 10KOH