2021 event guide

SMTAI Conference & ExhibitionNovember 2 - 4, 2021 | Minneapolis Convention Center1

2021EVENTGUIDE

www.smta.org/smtai

Conference: November 2 - 4Exposition: November 3 - 4

Minneapolis Convention CenterMinneapolis, MN, USA

*Co-located with MD&M Minneapolis

On-Demand: November 15*Through the end of the year*

Premiere Sponsors:

https://kohyoungamerica.com/

https://www.youtube.com/watch?v=3aM3iimYzAk

https://smta.org/mpage/smtai


CONTENTSIntroduction . . . . . . . . . . . . . . . . . 2Technical Committee . . . . . . . . . . . . . . . . . 3Welcome . . . . . . . . . . . . . . . . . . . . . . 5General Information . . . . . . . . . . . . . . . . . 6Conference At-A-Glance . . . . . . . . . . . . . . 7Keynotes . . . . . . . . . . . . . . . . . . . . . 9

Special Events . . . . . . . . . . . . . . . . . . . . . 10Sponsors . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Award Winners . . . . . . . . . . . . . . . . . . . . 13Technical Presentations . . . . . . . . . . . . . . 15Exhibitor Guide . . . . . . . . . . . . . . . . . . 31Product Finder . . . . . . . . . . . . . . . . . . . . . 46

SMTA International provides your best chance to reconnect with the global electronics manufacturing community and to stay competitive, identify challenges, innovate and exceed expectations.

We invite you to attend the in-person SMTA International Conference and Exhibition from November 2 - 4, at the Minneapolis Convention Center. Virtual presentations will be available starting November 15th. We are proud of our legacy of providing outstanding conference and exhibition experiences and this year will be no different. The conference and exhibition are a unique opportunity for us to collaborate, share, and learn from each other and industry experts.

The teamwork and collaboration that goes into developing the conference and exhibition is exceptional – it really highlights that SMTA is more than just an industry association, we are a family. Our technical program contains papers and presentations from true subject matter experts covering a wide range of electronic manufacturing topics.

The Technical Advisory Committee and the SMTA staff, Chapter Officers and Global Board of Directors sincerely hope that SMTA International is a valuable and enjoyable experience for you.

INTRODUCTION

SMTA International remains an exceptional event as we attract an outstanding group of authors, speakers and exhibitors. Our technical program contains papers and presentations from true subject matter experts covering a wide range of electronic manufacturing topics. SMTA International consistently welcomes over 100 speakers into the technical program each year.

Not able to attend in-person? You can stream recorded presentations starting November 15th.

We are excited to co-locate with Advanced Manufacturing Minneapolis (MD&M) at the Minneapolis Convention Center this November. Together, the events bring one of the largest audiences of engineering and manufacturing professionals to the Midwest.

Explore all five manufacturing and engineering trade shows that share the expo floor. It’s a one-stop experience delivering design to manufacturing solutions at every stage of the manufacturing process—design, materials, manufacturing, automation, and packaging—in top manufacturing sectors.

The Industry’s Strongest Technical Program

The Largest Audience of Engineers and Manufacturing Professionals


The distinguished SMTA International Technical Advisory Committee includes electronics manufacturing and packaging experts representing all facets of the industry. The Committee designed the conference program to ensure that today's latest trends and developments are fully addressed. They are an important component of the SMTA Knowledge Base.

Mohammed AbueedIntel Corporation

Dudi AmirIntel Corporation

Martin Anselm, Ph.D.Technical Innovations Track Director

Rochester Institute of Technology

Babak Arfaei, Ph.D.Ford Motor Company

Nilesh Badwe, Ph.D.IIT Kanpur

Andy BehrPanasonic

Elizabeth BenedettoHP Inc.

Mike Bixenman, DBA, MBAKYZEN Corporation

Lars BoettcherFraunhofer IZM Berlin

Rob BoguskiDatest Corporation

Keith BryantKB Consultancy

Bill Cardoso, Ph.D.Inspection Track Director

Creative Electron, Inc.

Burt CarpenterAdvanced Packaging Technology

Track DirectorNXP Semiconductors

Srinivas Chada, Ph.D.Raytheon Company

Lenora ClarkSubstrates Track Director

ESI Automotive

Jean-Paul Clech, Ph.D.EPSI, Inc.

Marie ColeIBM Corporation (Retired)

Priyanka Dobriyal, Ph.D.Women's Leadership Program

Track DirectorIntel Corporation

James Elliott FowlerSandia National Laboratories

Trevor GalbraithGlobal SMT & Packaging

Jay GorajiaSiemens Digital Industries Software

Sa'd Hamasha, Ph.D.Auburn University

Md Hasnine, Ph.D.Qorvo, Inc.

Dave HillmanCollins Aerospace

Jeff KennedyManufacturing Excellence Track Director

ZESTRON Americas

Robert Kinyanjui, Ph.D.Harsh Environments Track DirectorJohn Deere Electronic Solutions, Inc.

Pradeep Lall, Ph.D.Auburn University

Dale LeePlexus Corp.

Tanya Martin, CMPSMTA

Andrew MawerNXP Semiconductor

Iulia Muntele, Ph.D.Sanmina Corporation

Tim PearsonFlux, Solder, Adhesives Track Director

Collins Aerospace

Anto RajMedtronic

Brian RoggemanQualcomm Technologies Inc.

Chad ShowalterChase Corp - Humiseal

Julie SilkKeysight Technologies

Greg VanceRockwell Automation

Rebecca Wheeling, Ph.D.Sandia National Laboratories

Ray Whittier Jr., CSMTPEBAE Systems

Charles Woychik, Ph.D.SkyWater Technology

Raiyo Aspandiar, Ph.D.Conference Director

Intel Corporation

Richard Coyle, Ph.D.VP Technical Programs

Nokia Bell Labs

TECHNICAL ADVISORY COMMITTEE


www.smta.org/smtaiDue Date: May 2, 2022

Become a part of the industry’s strongest technical program addressing all aspects of electronics manufacturing. Plan to present in-person or virtually at the annual SMTA International Conference. Full technical paper is required for

inclusion in the published proceedings.

Proposals are also being solicited from individuals interested in teaching professional development courses related to surface mount technology, advanced packaging, and electronics manufacturing.

Conference: October 31 - November 3Exposition: November 2 - 3

Minneapolis, Minnesota, USA

*Co-located with:

2022 Call for Abstracts


WELCOME TO SMTA INTERNATIONAL

Richard Coyle, Ph.D.VP Technical Programs

Nokia Bell Labs

Raiyo Aspandiar, Ph.D.Conference Director

Intel Corporation

The SMTA welcomes you to SMTA International and our Minneapolis venue. We have crafted another exceptional conference and exhibition experience for our attendees. We are happy to partner with MD&M Minneapolis to bring the Midwest’s largest electronics manufacturing event to you.

The program contains useful and relevant information from subject matter experts covering a wide range of topics, including technical sessions on Advanced Packaging (APT); Flux, Solder, Adhesives (FSA); Harsh Environments (HE), Manufacturing Excellence (MFX), Lead-Free Soldering Technology with a strong emphasis on Low Temperature Solders (LTS), Second-Level Interconnect Reliability (SLIR), Substrates (SUB), Technical Innovations (TI), and the Women’s Leadership Program.

We also want to extend our personal thanks to the companies and individuals that continue to sponsor and support SMTA International in these uncertain times. This includes the exhibitors, speakers, authors, co-authors, volunteers and the SMTA staff, Chapter officers and Board of Directors. Your support and commitment are what makes SMTA International such an exceptional event.

The Technical Advisory Committee, Expo Committee, staff, and Board of Directors sincerely hope that SMTA International remains a valuable and enjoyable experience for you. Thank you for your participation and support.


GENERALINFORMATION

Registration Hours (Hall B)

Monday, November 111:00am-5:00pm

Tuesday, November 2 - Thursday, November 47:30am-5:00pm

Conference Hours

Tuesday, November 28:30am-6:00pm

Wednesday, November 38:30am-4:00pm

Thursday, November 48:30am-3:00pm

Exhibit Hours

Wednesday, November 310:00am-5:00pm

Thursday, November 410:00am-4:00pm

Suitcasing PolicySMTA does not allow solicitation from non-exhibiting companies. This includes attempts to solicit or sell products to event attendees or exhibitors. Any non-exhibiting attendee observed soliciting business in the aisle of the expo will be asked to leave.

In the Event of an EmergencyPlease contact the Command Center and tell the operator the nature of the emergency. The Command Center can be contacted via:• cell phone at 612-335-6040.• beige house phones, located in public corridors, lobbies, and fire-hose cabinets on various pillars in

exhibit halls. The number [EXT. 2013] is posted by each phone.• uniformed security officers, who are posted at security podiums 24/7 and who will also respond to

any safety concerns.

Notice of PhotographyPhotos and videos may be taken at this event for promotional use. As a registrant or attendee you hereby give SMTA permission to publish photographs or video taken of you during the event.

PressCompanies wishing to leave information for media may leave their literature in Room 205AB.

SMTA OfficeConference speakers and session chairs should check in at Room 205AB. Conference speakers are invited to use Room 201A to prepare for their presentation.

SMTA BoothBe sure to visit us in Hall B on the main level to learn about membership benefits and opportunities.


CONFERENCEAT-A-GLANCE

Sessions - Tuesday, November 2

Registration Opens

7:00am 7:00am

8:00am 8:00am

9:00am 9:00am

10:00am 10:00am

11:00am 11:00am

12:00pm 12:00pm

1:00pm 1:00pm

2:00pm 2:00pm

3:00pm 3:00pm

4:00pm 4:00pm

5:00pm 5:00pm

Refreshment Break

Refreshment Break

Lunch

FSA1: Reliability EnhancementsMFX1: Process Development & Reliability

6:00pm 6:00pm

Women's Leadership Connection ReceptionWine & Ice Cream Social

SLIR1: Adoption of Pb-free Solder Assembly for the Aerospace & Defense Industry

FSA2: Flux PerformancesMFX2: Cleaning SLIR2: Predictive Modeling

MFX3: Cleaning SLIR3: Pb-Free Process InnovationsWomen's Leadership Program: Career Development Presentations & Guided

Meditation Session

MFX4: Design & ProcessSLIR4: Reliability Testing

WLP: Round Table Discussions

Track Key

Advanced Packaging Technology (APT)Flux, Solder, Adhesives (FSA)

Harsh Environment Applications (HE)Inspection / Counterfeit Electronics (INS)

Low Temperature Solder (LTS)

Manufacturing Excellence (MFX)Second-Level Interconnect Reliability (SLIR)

Substrates/PCB Technology (SUB)Technical Innovations (TI)


CONFERENCEAT-A-GLANCE

Sessions - Wednesday, November 3

Annual Meeting

8:00am 8:00am

9:00am 9:00am

10:00am 10:00am

11:00am 11:00am

12:00pm 12:00pm

1:00pm 1:00pm

2:00pm 2:00pm

3:00pm 3:00pm

4:00pm 4:00pm

5:00pm 5:00pm

Keynote Presentation

APT 1: Assembly Process & Materials 1

MFX5: Advanced Materials & Devices

LTS 1: Microstructure & Properties of LTS

EV Roundtable

Lunch Break

Appreciation Reception on the Expo Floor - Hall B

APT 2: Panel Discussion - Packaging for Automotive MFX6: Material Performances TI1: Thermal LTS 2: Reliability Testing (1)

Sessions - Thursday, November 48:00am 8:00am

9:00am 9:00am

10:00am 10:00am

11:00am 11:00am

12:00pm 12:00pm

1:00pm 1:00pm

2:00pm 2:00pm

3:00pm 3:00pm

Lunch Break

APT 3: Assembly Process & Materials 2 TI2: Digital Transformation

LTS 3: Assembly & Manufacturing Considerations

with LTS (1)

Refreshment Break

APT 4: Package Performance & Reliability

TI3: Process TransformationsLTS4: Assembly &

Manufacturing Considerations with LTS (2)

HE1: Challenges & Durability INS1: Inspection & Test LTS5: Reliability Testing 2


KEYNOTES

Are You Ready for the EV Revolution?Loren McDonald, CEOEVAdoption, LLCWednesday, November 3 | 9:00am-10:00am | Room 200A/B

The transition to electric vehicles (EVs) and away from gas-powered vehicles is clearly underway both around the world and in the US. Many key questions remain however, including how quickly the transition will occur (especially in America) and how disruptive the transition to EVs will be to various segments of the auto industry — from suppliers, to dealers and OEMs. In particular, the shift to EVs is turning the automotive supply chain on its head as lower barriers of entry are bringing many new players — both big and small — to the table.

In his keynote presentation, electric vehicle analyst and consultant Loren McDonald of EVAdoption will enlighten SMTA members on how and when the EV transition is likely to play out and outline both key challenges and opportunities for surface mount technology suppliers.

Jose Morey, Consultant for NASA, IBM, Hyperloop Transportation, and Liberty BioSecurity Health

Wednesday, November 312:30pm-1:15pmEngineering Theater

Since its creation in 1816 by the French Physician René Laënnec, the stethoscope has become the quintessential icon for a physician. We will be exploring the transition from the age of the stethoscope to the age of robotics and artificial intelligence — and envision a world in which the next iconic tool for a physician is not a physical augmentation to hear breath sounds and cardiac sounds but an augmentation to understand a patient's digital twin to be able to predict disease and intervene even when separated by vast distances.

Steve Grove, Commissioner, Minnesota Department of Employment and Economic Development (DEED)

Thursday, November 412:30pm-1:15pmEngineering Theater

Minnesota is home to one of the highest per capita of Fortune 500 companies and home to many more key engineering and manufacturing businesses. This is largely in part to a few key things: our focus on innovation and economic expansion, our diverse workforce, and a growing ecosystem to support innovation. In this keynote presentation, Commissioner Steve Grove will discuss opportunities and advancements in the North Star State and take questions from the audience.

Future of Medtech: From AI to Xenobots & Everything in Between

Innovation in Minnesota: Where We Came From and Where We’re Going

Additional Keynotes

Sponsored by


SPECIAL EVENTS

Growing the Future: NextGen Electronics Manufacturing Workforce2:00pm-4:00pm | Room 201B

We’re confident you’re well aware of the current difficulty and projected future inability to replace experienced technical staff to sustain a robust and technically competitive electronics manufacturing base in North America.

Many conditions over decades led to this current state of affairs (years of consolidation, offshoring, focus on more glamorous “dot.com” career options, aging-out of “boomer” -era technical staff, COVID, etc.) and no one single solution will correct it, and it will take time (years) but there are efforts underway to begin the road back.

Jump Start - 101 Level Technical Sessions10:30am-4:15pm | Show Floor Theater

Topics include:• 10:30am: Stencil Printing - Chrys Shea, Shea

Engineering Services• 11:30am: Inspection - Isaiah Smith, Koh Young• 12:30pm: Placement - Tom Foley, ASM• 1:30pm: Reflow - Anna Lifton, MacDermid Alpha• 2:30pm: DFM - Dale Lee, Plexus Corp.• 3:30pm: Cleaning - Jigar Patel, Zestron Americas

Tuesday, November 2

Wednesday, November 3

Lakes & Legends Brewing Company6:00pm | 1368 LaSalle Ave, Minneapolis, MN 55403

Informal gathering for Bingo & Brews - Everyone is welcome!Sponsored by: SMTA Heartland Chapter

Thursday, November 4

Casual Career Conversations12:00pm-1:00pm | SMTA Membership Booth

Grab your lunch and come hang out!• Resume Tips and Tricks Moderator: Eric Miller, KYZEN Corporation• Strategic Self Promotion Moderator: Justin Worden, Austin American Technology

Complimentary Headshots12:00pm-4:00pm | Career Zone

Advance your LinkedIn profile and other professional efforts with a complimentary headshot from a Lunch Break Headshots professional photographer.

Electric Vehicles: Fad, Fantasy, or Fortune in SMT?11:30am-12:30pm | Room 205CD

This EV roundtable will discuss the emerging EV market: why it hit an inflection point and how we should be responding. We’ll discuss opportunities for business growth and, more importantly, our responsibility as industry leaders to be good stewards in PCBA for automotive applications.

Come join SMTAI keynote speaker, Loren McDonald, and industry experts, Debbie Carboni and Brian O'Leary, for an educational and lively exchange on the emerging market of electric vehicles.


Career Development Presentations and Guided Meditation Session

Amanda MikhailResearch Operations Administrator

Mayo Clinic

Ti�any KariHealth Promotions Coordinator

St. Louis County

Gayle R. T. Schueller, Ph.D.Senior Vice President and Chief Sustainability O�icer

3M Innovation and Stewardship

Speed Mentoring Sessions

Breaking Through Unwritten Stereotypes: Good Old Boys Club

Chrys Shea, Shea Engineering ServicesSherry Stepp, KYZEN Corporation

Identifying Mentors and Cultivating SponsorsMarie Cole, IBM Corp. (Retired)

Jessica Molloy, ZESTRON Corporation

Importance of Strategic ThinkingMartin Anselm, Rochester Institute of Technology

Tanya Martin, SMTA Headquarters

Relentlessly Reinvent and Accelerate your Career Path

Amanda Mikhail, Mayo ClinicJulie Silk, Keysight Technologies

Positive Outcomes from Tough SituationsMike Konrad, Aqueous Technologies

Michelle Ogihara, Seika Machinery, Inc.

Find your Strengths: Personality AnalysisDebbie Carboni, KYZEN CorporationPriyanka Dobriyal, Intel Corporation

Co-Chairs: Cheryl Tulko�, NI and Eileen Hibbler, EAP

Ice cream comes in many flavors and everyone typically has a favorite or two. Think of how boring life would be if all of the ice cream in the world was vanilla with no sprinkles or toppings. There is nothing wrong with good ole vanilla, chocolate or strawberry but imagine a world without rocky road, pistachio or butter pecan! I shudder the thought. Come join us as we

mingle and celebrate the di�erent flavors of people in our industry. (Don’t be surprised to find a couple of nuts in the bunch.)

Connection Reception and Ice Cream Social

It's Good We're Not All the Same:Career Diversity and Development

Tuesday, November 2 | 1:00pm-6:00pm | Room 204ABFree for everyone and all are welcome!


MEDIA AND ASSOCIATION SPONSORS

PREMIERE SPONSORS

EVENT SPONSORS


SMTA+ CorporateKeysight Technologies

Excellence in International LeadershipMei Ming KhawKeysight Technologies

Excellence in LeadershipDebbie Carboni

KYZEN Corporation

Member of Technical DistinctionRonald Lasky, Ph.D., P.E.

Indium Corporation

FoundersDavid Raby

STI Electronics, Inc.

Stromberg ScholarshipMohamed El Amine Belhadi

Auburn University

Hutchins GrantYi Zhou

Georgia Institute of Technology

2021 Members of Distinction Awards

2021 Education Awards

AWARD WINNERS


AWARD WINNERS

2020 Conference Winners

Best of Proceedings Paper Awards

WINNER: Richard Coyle, Ph.D., Nokia Bell Labs "Enhancing Thermal Fatigue Reliability of Pb-Free Solder Alloys with Additions of Bismuth and Antimony"(Co-Authors: Charmaine Johnson, David Hillman, and Tim Pearson, Collins Aerospace; Michael Osterman, CALCE; Joe Smetana, Nokia; Keith Howell, Nihon Superior Co., Ltd.; Hongwen Zhang and Ji Geng, Indium Corp.; Julie Silk, Keysight Technologies; Derek Daily, Senju Comtek Corp.; Babak Arfaei, SUNY-Binghamton; Ranjit Pandher, Alpha Technologies; Andre Delhaise, Celestica; Stuart Longgood, Delphi Technologies; Andre Kleyner, Aptiv)

Honorable Mention: Andrew Mawer, NXP Semiconductors"Miniaturized Stacked Die QFN for Tire Pressure Monitoring System Applications"(Co-Authors: Mollie Benson, Dwight Daniels, A R Nazmus Sakib, and Vishrudh Sriramprasad, NXP Semiconductors N.V.)

Honorable Mention: Jennifer Bennet, P.E., IBM Corporation"CBGA and CCGA Field Reliability Predictions Confirmed"(Co-Authors: Jim Bielick, Marie Cole, IBM Corporation)

Honorable Mention: Karen Tellefsen, Ph.D., MacDermid Alpha Electronics Solutions"Advanced SIR Testing for Trapped Solder Paste Flux Residue"(Co-Authors: Aurkie Ray, Anna Lifton and Paul Salerno, MacDermid Alpha Electronics Solutions)

Honorable Mention: Keith Sweatman, Ph.D., Nihon Superior Company, Ltd."Behaviour and Strengthening Effects of Sb in a Low-Bi Sn-Cu Solder Alloy"(Co-Authors: Tetsuro Nishimura, Nihon Superior Co., Ltd.; Sergey A. Belyakov and Christopher M. Gourlay, Imperial College London)


Track Key

Advanced Packaging Technology (APT)Flux, Solder, Adhesives (FSA)

Harsh Environment Applications (HE)Inspection / Counterfeit Electronics (INS)

Low Temperature Solder (LTS)

Manufacturing Excellence (MFX)Second-Level Interconnect Reliability (SLIR)

Substrates/PCB Technology (SUB)Technical Innovations (TI)

Tuesday, November 2

8:30am - 10:00amRoom 203AB

FSA1: Reliability Enhancements

Chair: Andy Behr, Panasonic

>>Edge Bonding as Viable Reinforcement for Solder Joints in High Reliability ApplicationsWestin Bent, MacDermid Alpha Electronics Solutions

>>Deliquescent Relative Humidity Measurement of No-Clean Flux ResiduesEric Campbell, IBM Corporation

>>A Correlation Study of Solder Cup Voiding Versus Solder Joint Integrity*Timothy Pearson, Collins Aerospace

8:30am - 10:00amRoom 200D

MFX1: Process Development & Reliability

Chair: Greg Kloiber, Ducommun

>>The Evolution of Material Handling Practices and ProcessesMichael Adamson, Inovaxe Corporation

>>Statistical Analysis of Transfer Efficiency in the Age of Very Large Sample Sizes*Ron Lasky, P.E., Ph.D., Indium Corporation

>>The Effect of Grain Size Distribution on the Defect Generation Mechanism of 0201 PassivesSwagatika Patra, Binghamton University-SUNY

TECHNICAL SESSIONS

* Designates Speaker of Distinction


8:30am - 10:00amRoom 200E

SLIR1: Adoption of Pb-free Solder Assembly for the Aerospace and Defense Industry

Chair: Richard Coyle, Ph.D., Nokia Bell Labs

>>Perspectives and Considerations for the Implementation of Pb-Free Solders into Aerospace, Defense, and High Performance Products and Systems Part 1*David Hillman, Collins Aerospace

>>Perspectives and Considerations for the Implementation of Pb-Free Solders into Aerospace, Defense, and High Performance Products and Systems Part 2*Anthony Rafanelli, Ph.D., Raytheon Technologies

>>Criteria for Solder Alloy AdoptionMichael Osterman, Ph.D., University of Maryland - CALCE

FSA2: Flux Performances

Chair: Andy Behr, Panasonic

>>An Investigation into the Effects of Greases on Low-Load Gold-Plated Electrical Contacts Undergoing FrettingJulie Silk, Keysight TechnologiesRishabh Chaudhary, M.S., Center for Advanced Life Cycle Engineering (CALCE)

>>Lower Temperature Soldering Using Supercooled Liquid MetalIan Tevis, SAFI-Tech

>>Materials Characterization and Correlation Study of Solder Paste using Electrochemical Impedance Spectroscopy (EIS) and Surface Insulation Resistance (SIR)*Mark McMeen, STI Electronics

10:30am - 12:00pmRoom 203AB

TECHNICAL SESSIONS



MFX2: Cleaning

Chair: Jason Keeping, P. Eng., Celestica Inc.

>>Modern Electronics Defluxing – Meeting the Low VOC ChallengeNaveen Ravindran, M.S.Ch.E., ZESTRON Corporation

>>The Relationship Between Reflow Profiles and Contamination*Michael Konrad, Aqueous Technologies

>>Engineered Aqueous Cleaning It All Comes Down To Performance*Debbie Carboni, KYZEN Corporation

10:30am - 12:00pmRoom 200D

SLIR2: Predictive Modeling

Chair: Tim Pearson, Collins Aerospace

>>A Modified Coffin-Manson Methodology for Predicting Solder Joint Life in Eutectic Tin-Lead and Lead-Free Assemblies*Jean-Paul Clech, Ph.D., EPSI Inc.

>>Low-Temperature Solders SMT Process Optimization for Enhanced ReliabilityPaul Salerno, MacDermid Alpha Electronics Solutions

>>An Investigation on the Influence of Nickel Contamination of Plated Through Hole (PTH) Solder Joint Integrity*David Hillman, Collins Aerospace

10:30am - 12:00pmRoom 200E

TECHNICAL SESSIONS



MFX3: Cleaning

Chair: Keith Howell, Nihon Superior

>>Cleanliness Detection and Resistance of Solvent Extract, a Critical Evaluation*Tom Forsythe, KYZEN Corporation

>>Identifying Cleaning Compatibility Issues with Electronic ComponentsClaire Brennan, Ph.D., Collins Aerospace

>>Detailed Study of Condensate Residues in the Soldering Process - Analysis of the Responsible Reaction Partners as well as Reasons for Condensate Polymerization and Growth of Crystalline Structures*Viktoria Rawinski, Rawinski GmbH

>>Site-Specific Ionic Contamination Process Control Monitoring Plan Method*Mike Bixenman, DBA, MBA, Magnalytix

1:00pm - 3:00pmRoom 200D

1:00pm - 3:00pmRoom 200E

SLIR3: Pb-Free Process Innovations

Chair: David Hillman, Collins Aerospace

>>A Novel Bismuth-, Indium-, and Antimony-Containing Lead-Free Solder with Enhanced Thermal Reliability for Automotive and LEDJie Geng, Indium Corporation

>>High-Reliability Lead-free Solders for Automotive Electronics - Thermal Cycling and Shear Strength PerformancePaul Salerno, Alpha Assembly Solutions

>>Reliability of Solder Joints on Flexible Aluminum PC BoardsDivyakant Kadiwala, Averatek CorporationNazarali Merchant, Averatek Corporation

>>Reducing Solder Scrap by Replacing Solder Paste with Solder Preforms When AppropriateMitch Holtzer, Alpha Assembly Solutions

TECHNICAL SESSIONS



MFX4: Design and Process

Chair: Tom Borkes, The Jefferson Project

>>Process and Design Guidelines for Large and Complex RF and EMI Shields for Board Level AssemblyMohammed Alam, Intel Corporation

>>Lessons Learned with Large and Heavy Copper Boards, a Review of Quality and Productivity ImprovementsPaul Wilson, Rockwell Automation

>>Root Cause of Dye Stain Observed on Server Motherboard Sockets BGA Solder Joints and its Impact on their Solder Joint Quality and Reliability*Raiyo Aspandiar, Ph.D., Intel Corporation

3:30pm - 5:00pmRoom 200D

SLIR4: Reliability Testing

Chair: Jean-Paul Clech, Ph.D., EPSI Inc.

>>Effects of Matching Lead-free Solder Joints Compared to SnPb on BGA Reliability in Thermal CyclingMohammed Belhadi, Auburn University

>>Role of Conformal Coating and its Strategies for Tin Whisker MitigationPreeth Sivakumar, Binghamton University

3:30pm - 5:00pmRoom 200E

TECHNICAL SESSIONS



Enroll Today in the SMTA Assembly Essentials Package

Courses Cover 7 Key Processes:

www.smta.org/training

• Stencil Printing• Component Placement• Re�ow Soldering• Wave Soldering

• Selective Soldering• Cleaning• Rework

You Need to Know This Stu�!


Wednesday, November 3

11:00am - 12:00pmRoom 200E

LTS1: Microstructure and Properties of LTS

Chair: Jim Wilcox, Universal Instruments

>>Effect of Initial Volume Ratio, Reflow Temperature and Current Stressing on the Microstructure of SnBiAg-SAC Mixed Solder Joints*Eric Cotts, Ph.D., Binghamton University

>>The Variation of the Electrical Resistance and Microstructure of SnBi based Solder Joints with Current StressingFaramarz Hadian, Ph.D., Binghamton University

11:00am - 12:30pmRoom 202AB

APT1: Assembly Process & Materials 1

Chair: Pradeep Lall, Ph.D., Auburn University

>>Innovative Indium and Silver-Tin Plating Processes for Connector Press-Fit ApplicationsFrank Xu, Ph.D., MacDermid Alpha Electronics Solutions

>>Micro Device | Hot Solder DipPhil Meyers, Retronix Ltd

>>No Bleed Die Attach to Roughened LeadframeDan Hart, MacDermid Alpha Electronics Solutions

11:00am - 12:30pmRoom 200D

MFX5: Advanced Materials and Devices

Chair: Eric Campbell, IBM Corporation

>>Varying Requirements, Same Inkjet Solder Mask Coating Tool - The Case of Inkjet Adaptability by Printing StrategiesDon Veri, SUSS MicroTec NL

>> New Device Validates Printer Accuracy and Squeegee Force Capability During Singular TestMichael Sivigny, CeTaQ Americas

>>Thin Foil Printing in Today’s Miniaturized World: Do Printing Rules Change?*Chrys Shea, Shea Engineering Services

TECHNICAL SESSIONS



2:00pm - 4:00pmRoom 202 AB

APT2: Panel Discussion - Packaging Challenges for Automotive Applications

Moderator: Andrew Mawer, NXP Semiconductors

2:00pm - 4:00pmRoom 200D

LTS2: Reliability Testing (1)

Chair: Eric Cotts, Ph.D., Binghamton University

>>The Effect of Peak Reflow Temperature on Thermal Cycling Performance and Failure Mode of Hybrid Low Temperature Solder Joints*Richard Coyle, Ph.D., Nokia Bell Labs

>>Interim Thermal Cycling Report on Hybrid and Homogeneous LTS Solder Joints*Richard Coyle, Ph.D., Nokia Bell Labs

>>Mechanical Shock Testing And Failure Analysis On Mixed SnAgCu-BiSn And Full Stack BiSn Solder Joints Of CABGA192 Components*Raiyo Aspandiar, Ph.D., Intel CorporationJagadeesh Radhakrishnan, Intel Corporation

>>Thermal Reliability of Mixing Bismuth Containing Solder Paste with SAC BGA's at Low Reflow Temperature- Part IISahana Marur Kempaiah, Rochester Institute of Technology

MFX6: Material Performances

Chair: Keith Bryant, KB ConsultancyCo-Chair: Chris White, PPSI Manufacturing

>>What Do You Want on Your Tombstone?*Tony Lentz, FCT Assembly

>>Correlation of Solder Paste Electrochemical Impedance Spectroscopy (EIS) Measurements to Solder Paste Inspection (SPI) PerformanceMorgan Miller, Insituware

>>Evolution and Applications of Fine-Feature Solder Paste Printing for Heterogeneous IntegrationEvan Griffith, Indium Corporation

>>Impact of the Surface Finish on IMC and Solder Joint Reliability with Low-Temperature Solder PasteJoe McGurran, Atotech USA, LLCBritta Schafsteller, Atotech Deutschland GmbH

2:00pm - 4:00pmRoom 200D

TECHNICAL SESSIONS

Panelist: Pradeep Lall, Ph.D., Auburn UniversityPanelist: Burt Carpenter, NXP Semiconductors

Panelist: Rajesh Sur, QorvoPanelist: Chuck Woychik, Ph.D., SkyWater Technology



2:00pm - 3:30pmRoom 203AB

TI1: Thermal

Chair: Julie Silk, Keysight Technologies

>>High Performance Liquid Metal Thermal Interface Materials*Ron Lasky, P.E., Ph.D., Indium Corporation

>>GaIn Based Liquid Metals as TIMs: Challenges and ConsiderationsPeter McClure, Universal Instruments Advanced Process Laboratory

>>Photonic Soldering Temperature Sensitive Components with High Temperature Solder AlloysVahid Akhavan, NovaCentrix

Thursday, November 4

8:30am - 10:00amRoom 202AB

APT3: Assembly Process & Materials 2

Chair: Andrew Mawer, NXP Semiconductors

>>Investigation of Interdiffusion and Formation of Intermetallic Compounds in Power Electronic Substrate Joints Produced by Transient Liquid Phase BondingChidinma Imediegwu, Georgia Institute of Technology

>>CPU Socket Interposer Component Level and Manufacturability Study, Part 1: Socket Contact vs. Direct-Solder-Attach Interconnection*Paul Wang, Mitac International Corporation

>>Underfill Material and Interface Property Evolution in Underhood Automotive Temperatures over Period of 1-Year*Pradeep Lall, Ph.D., Auburn University

TECHNICAL SESSIONS


SMTAI Conference & ExhibitionNovember 2 - 4, 2021 | Minneapolis Convention Center24© 2020 Zymet

For More Information:

[email protected] or www.zymet.com

Reworkable Edgebond AdhesivesFor High Reliability Applications

© 2020 Zymet

For VideoQR Code

https://youtu.be/3hOxhI0Uark


8:30am - 10:00amRoom 200E

LTS3: Assembly and Manufacturing Considerations with LTS (1)

Chair: Phil Isaacs, IBM Corporation

>>Enabling Pin in Paste Through Hole Soldering Through SnBi Low Temperature SolderSugadh Bakare, Intel Corporation

>>Unveiling a Total Solution for Soldering Through-hole Components using a Low Temperature Alloy*Anna Lifton, MacDermid Alpha Electronics Solutions

>>Using a Low Melting Point Solder in a Selective Soldering ProcessEddia Groves, Pillarhouse USA, Inc.Jonathan Wol, Pillarhouse USA, Inc.

8:30am - 10:00amRoom 203AB

TI2: Digital Transformation

Chair: Marie Cole, IBM Corporation (Retired)

>>Leveraging CFX-QPL to Integrate Equipment and Create a Smart FactoryIvan Aduna, Koh Young America, Inc.

>>Systems Analysis and Axiomatic Design Using Discrete Event SimulationZohair Mehkri, Flex

>>SMT Performance Analytics - Golden Cycle Time and Automated Loss Reason InferenceAndrew Scheuerman, Ph.D., Arch Systems

TECHNICAL SESSIONS



10:30am - 12:00pmRoom 200E

LTS4: Assembly and Manufacturing Considerations with LTS (2)

Chair: Randy Schueller, Ph.D., Dell

>>Manufacturing Cost Reductions Available When Using Low MP Solder PasteMitch Holtzer, Alpha Assembly Solutions

>>The Influence of Element Lead (Pb) Content in Tin Plating on Tin Whisker Initiation/Growth*David Hillman, Collins Aerospace

>>Hybrid Assembly and Reliability of Conventional Pb-Free BGA’s Using Low Temperature Solder Paste for Temperature Sensitive IC Applications*Andrew Mawer, NXP Semiconductors

10:30am - 12:30pmRoom 202AB

APT4: Package Performance and Reliability

Chair: Chuck Woychik, Ph.D., SkyWater Technology

>>Automotive Gate Driver Package with Galvanically Isolated Communication Linkage*Burton Carpenter, NXP Semiconductors

>>Modeling of the Effect of Thermal Pad Voiding on Quad Flatpack No-Lead ComponentsRoss Wilcoxon, Ph.D., Collins Aerospace

>>Additive-Print Process-Performance Interaction for Ink-Jet and Direct-Write Circuits with Surface Mount Components*Pradeep Lall, Ph.D., Auburn University

>>An Approach to Use Reduced Sample Sizes for Qualification Testing Based on Failures in Time (FITS) Analysis and the Poisson Exponential Binomial Distribution for Low Volume Custom ComponentsJacob Weber, Collins Aerospace

TECHNICAL SESSIONS



10:30am - 12:30pmRoom 203AB

TI3: Process Transformation

Chair: Greg Vance, Rockwell Automation

>>An Automated PCB Design Constraint Extraction and Verification from the SOC Platform Design CollateralAlan Hatfield, Intel CorporationMinoru Ishikawa, Siemens Digital Industries Software

>>Aerosol Jet Printed Interconnects for Millimeter-wave ComponentsBryan Germann, Optomec

>>An Investigation into Alternative Methods of Drying Moisture Sensitive Devices in Storage and in Re-Work ApplicationsDan Jenkins, Steel Camel

>>Improving Immersion Silver Performance for 5G ApplicationsDenis Jacques, Technic Inc.


INS1: Inspection and Test

Chair: Mike Konrad, Aqueous Technologies

>>A New X-Ray Tube Technology to Revolutionise Electronics Inspection*Keith Bryant, KB Consultancy

>>SIR Glass Test Vehicle Designed to Characterize Process Materials*Mike Bixenman, DBA, Magnalytix

TECHNICAL SESSIONS



1:30pm - 3:00pmRoom 200E

LTS5: Reliability Testing (2)

Chair: Dale Lee, Plexus Corp.

>>Solder Ball Drift Behavior of Hybrid SnAgCu‐LTS Solder Interconnects in Accelerated Thermal Cycling*Luke Wentlent, Universal Instruments Corporation*Jim Wilcox, Universal Instruments Corporation

>>Challenges To Maintain High Electrical Reliability of Low Temperature Solder PasteRamakrishna Hosur Venkatagiriyappa, Ph.D., MacDermid Alpha Assembly Solutions

>>Thermal Cycling Behaviors of Hybrid and Homogeneous Low Temperature Solder Interconnects*Luke Wentlent, Universal Instruments Corporation*Jim Wilcox, Universal Instruments Corporation


HE1: Challenges and Durability

Chair: Gary Tanel, Electronics Alliance

>>Challenges of Interpreting and Applying New IPC J-STD-001 Cleanliness Standards in High-Rel Applications*William Capen, Honeywell FM&T

>>Effect of Temperature on the Mechanical Fatigue of Solder Joints in Ball Grid Array AssemblyXin Wei, Auburn University

>>Electrical Performance Impact of Disinfecting Near and Around Electronic Systems*Phil Isaacs, IBM Corporation

TECHNICAL SESSIONS



��

��

��


On Monday, November 15th, SMTA will launch the on-demand SMTA International Conference that will feature technical presentations for attendees to stream.

You can attend the conference virtually and stream recorded presentations starting November 15th with access through the end of the year (December 31st). Virtual conference access will be included with each in-person conference registration. The full list of papers available to stream can be found online.

ON-DEMAND CONFERENCE

https://smta.org/mpage/smtai-conference


Deb Geiger220 Gibraltar Road, Suite 300, Horsham, [email protected] Software delivers a uniquely adaptive manufacturing execution solution (MES) platform, built on an IIoT backbone, to improve manufacturing speed, control, and visibility across the entire enterprise and throughout the supply chain. Aegis’ platform, FactoryLogix®, is designed for today's manufacturing reality, connecting business-critical systems, processes, and people---unleashing transformative benefits of Industry 4.0. Aegis is enabling manufacturing excellence in more than 2,200 factories across aerospace, defense, electronics, medical, and automotive industries.

Mark Venco2700 N.E. Expy., Building B-500, Atlanta, [email protected], over the last 25 years, has established itself as the worldwide leader of Warpage Measurement Systems and Testing Services. Our solutions determine the actual warpage characteristics of electronic assemblies/components down to the sub-micron level, from extreme sub-freezing to high temperature conditions. Whether it be sample testing in a Q.C. lab, developing new products in engineering or room-temperature testing on the manufacturing floor, Akrometrix metrology solutions provide our customers critical data that leads to repeatable and reliable electronic assemblies utilized in consumer products up to mission critical military applications.

EXHIBITOR A-Z

Acculogic

Scott Moser6475 Sycamore Court N., Maple Grove, [email protected] provide a range of Automated Test Equipment, Robotic Flying Probe, Test Program Development on most ATE platforms and Contract Testing Services. Doesn’t matter if you need ICT, FCT, Device Programming or Boundary Scan testing services – we support it all from our Maple Grove, MN facility.

ACL STATICIDE & JW Sales

Dan Kaiser17964 90th Place N., Maple Grove, [email protected] over 50 years, ACL, Inc. has developed innovative products for static control and critical cleaning. We offer cleaning products for contamination control, PCB basics, and ESD-safe products for manufacturing and EPAs including anti-static mats, meters, dissipative floor coatings, and anti-static topicals including Staticide®. Certified to ISO 9001:2015.

Aegis Software

Barry Zielke905 Albion Ave. , Schaumburg, [email protected] is a PCB manufacturer, manufacturing PCB’s since 2005. 3 factories located in Shenzhen, Nanjing, & Zhuhai China. Producing, high mix, low to medium / high volume rigid PCB’s 2-14 layers, flex, rigid flex, RF/HF, & metal clad. We are UL for up to 6oz copper, Proto’s 3-5 days, Small production 7-10 days and standard production, 15 days. Our 4th facility focusing on HDI boards will be complete Jan 2022. Our motto is “service beyond expectation

Alltemated

Randy Temple541 Northgate Parkway, Wheeling, [email protected] 1993, Alltemated has been the electronics industry’s preferred choice for one-stop component-preparation services. Alltemated sets the standard for tape and reel packaging, IC programming, underflim technology and carrier tape manufacturing. Widely known for supplying PLACE-N-BOND underfilms a durable adhesive technology for bonding SMD components to PCB. Seamlessly integrates with SMT assembly and eliminates curing and dispensing.

Booth 3236

Booth 3233

Booth 3328

AkrometrixBooth 3419

Allfavor TechnologyBooth 3502

Booth 3340


EXHIBITOR A-Z

American Standard Circuits

David Lackey475 Industrial Drive, West Chicago, [email protected] Standard Circuits (ASC) is a total solutions provider, manufacturing quality rigid, metal-backed, RF/Microwave, flex, and rigid flex PCB's for defense, aerospace, medical, automotive, and industrial markets in volumes from test and prototypes to large production orders.

ANDA Technologies

Brian Strumm47639 Lakeview Blvd., Fremont, [email protected] (Guangdong Anda Automation Solutions Co., Ltd.) established in 1999, is an industry 4.0 smart equipment and automation solutions manufacturer with over 20 years’ experience manufacturing, developing intelligent automation systems, and providing sales/service to fluid applications. Anda smart equipment and automation systems are used across industries worldwide. Our products include high precision dispensing, conformal coating, plasma treatment, curing ovens, multi-functional assembly, semiconductor manufacturing equipment, medical electronic dispense/assembly machines, and smart manufacturing system solutions.

ASC International

Steve Arneson830 Tower Drive, Suite 200, Medina, [email protected] International is a leading global manufacturer of 3D solder paste inspection (SPI) and automated optical inspection (AOI) systems. New product innovations will be highlighted by the industry's most cost effective LineMaster Fusion 3D inline SPI system and the VisionPro Prey portfolio of offline / inline AOI solutions. For more information, please visit us at www.ascinternational.com

ASM

Mark Ogden3975 Lakefield Court, Suwanee, [email protected] is the worldwide leading supplier of electronics assembly and microelectronics packaging equipment. For over 40 years our DEK Screen Printing and SIPLACE Pick and Place SMT machines have been enabling our customers to manufacture products for the digital world. In addition, ASM is also provides a suite of factory software, ASM Works. This enables our customers to optimize workflows and increase productivity.

Asys Group Americas Inc

Veronika Merino140 Satellite Blvd., N.E., Suite D, Suwanee, [email protected] Group Americas, Inc. is located in Suwanee, GA, United States and is part of the Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance Industry.

BlueRing Stencils

Jeremy Glanzer140 Mount Holly Bypass, Unit 10, Lumberton, [email protected] is a “full service” stencil & machined parts manufacturer committed to supplying advanced technologies and solutions to various industries. We offer on-time delivery of high-quality laser cut stencils, transfer increasing nano-coatings, fixtures & parts, engineering & development services, all committed to give you the highest quality assembly for your specific process. We have heavily invested in the best technology & developed the most qualified team members with decades of manufacturing & engineering experience.

Booth 3303

Booth 3001

Booth 3532

Booth 3025

Booth 3019

Booth 3416

BTU International

Kirsten Mattson23 Esquire Road, North Billerica, [email protected] International, a wholly-owned subsidiary of Amtech Group (Nasdaq: ASYS), is a global supplier and technology leader of advanced thermal processing equipment solutions in the electronics manufacturing market. BTU’s high-performance convection reflow ovens are used in the production of SMT printed circuit board assemblies and in semiconductor packaging processes.

Booth 3412


Frances [email protected] by UP Media Group, and serving the global PCB community through PRINTED CIRCUIT DESIGN & FAB/CIRCUITS ASSEMBLY (print/digital monthly publication), pcdandf.com and circuitsassembly.com, PCBUPdate.com e-newsletter, pcbwest.com conference and exhibition, PCB2Day.com seminars and webinars, PCBChat.com podcasts and other media.

EXHIBITOR A-Z

CCL Design

Jeff Zeilinger2S004 Lakewood Lane, Wheaton, [email protected] is the global leader of ID solutions and labeling products, specializing in auto-apply products that can withstand extreme and harsh prossessing challenges in the SMT environment. CCL products are successfully used in various industries such as electronics, medical, aviation, energy, military, automotive, security and more.

Circuits Assembly (UP Media)

Bruce Davidson1133 Northgraves Circle., Kanata, [email protected] InvMan is a system of hardware and software for Smart Inventory Control storage and retrieval of components used in the manufacturing operation as well as providing long term traceability information and MSL device tracing within the plant. Pick to Light smart shelving on mobile trolleys, fixed shelving, or in dryboxes significantly improve kitting times and storage times for much higher efficiency of operation and can provide significant ROI benefits of well within one year in most cases.

Cluso North America

Erica Ziino2700 90th Street, Sturtevant, [email protected] over 70 years, Condair has been the leading commercial manufacturer of humidification, dehumidification, and evaporative cooling for electronics manufacturing and data storage facilities. Ensuring proper humidification can improve production output, elevate product quality, and boost ROI by controlling ESD, reducing de-soldering occurrences, minimizing brittle components, and offering energy efficiencies. In addition, scientific studies reveal maintaining an optimum indoor humidity between 40-60%RH improves human health and well-being. Visit Booth 3317 to LEARN MORE.

Condair

Kallan Blake4500 Quebec Ave. N., New Hope, [email protected] take pride in providing unique static protective packaging solutions that match the way you want your system to work and our vertically integrated processes put us in the position to choose the most cost effective way to meet your needs.When you add our package design and manufacturing expertise with our raw material inventory and stock selection, you have CCI’s formula for success.

Conductive Containers, Inc.

Booth 3103

Booth 3213

Booth 3332

Booth 3317

Booth 3133

http://http://pcdandf.com/

http://circuitsassembly.com

http://pcbwest.com


EXHIBITOR A-Z

CTI Systems

Daniel Gray751 S Church Street, Goldston, [email protected] Ext: 279CTI Systems is a world class manufacturer of PCB assembly equipment/Laser marking/PCB depanelers and odd form component insertion. We also provide state of the art PCB transport equipment using AGV’s, robotics, and custom automation solutions.

CyberOptics Corporation

Andrew Larson5900 Golden Hills Drive , Minneapolis, [email protected] Corporation is a leading global developer and manufacturer of high-precision 3D sensing technology solutions. CyberOptics’ sensors are used for inspection and metrology in the SMT and semiconductor markets to significantly improve yields and productivity. By leveraging its leading edge technologies, the Company has strategically established itself as a global leader in high precision 3D sensors. Headquartered in Minneapolis, Minnesota, CyberOptics conducts worldwide operations through its facilities in North America, Asia and Europe.

ELANTAS PDG

Shayna Kennedy5200 N 2nd Street, St Louis, [email protected] aspect of ELANTAS PDG, INC.'s operations is structured towards one goal - to accommodate the special needs of the individual customers, large or small, with customized products for their unique applications.ELANTAS PDG, INC. is built on the continuous improvement concept. We will always provide the world's most reliable, innovative and cost-effective products to the electrical and electronics industry by striving to exceed the defined needs and expectations of our customers.

Eltek USA Inc

Connie Herring250 Commercial Street, Suite 3010, Manchester, [email protected] USA, PCB’s : Flex| Rigid-Flex, Complex Rigid PCB’s. Wide range of offering: HDI, high aspect ratio, bondable finishes. Supporting Aero Space and Defense, Medical, Industrial, Communications, and Semiconductor. ITAR-AS900-IS9001

ESSEMTEC USA

Don Jeka420 Andbro Drive, Unit 3, Pitman, [email protected] USA delivers SMT prototyping and highly flexible pick-and-place equipment, micro dispensing & intelligent component storage systems.

Europlacer Americas Inc.

Mike Foster519 US Highway 301 S., Tampa, [email protected] designs, manufactures, sells and services advanced SMT Assembly Solutions to the global market, including screen printing and placement equipment, complemented by a suite of software tools designed to provide intuitive set-up, programming and portable production monitoring functions. Over our 50+ years, Europlacer has been the proud recipient of numerous prestigious industry awards for product innovation and service excellence, and is the first placement equipment provider to comply with the IPC CFX initiative.

Booth 3145

Booth 3125

Booth 3402

Booth 3239

Booth 3520

Booth 3413

Finetech

Adirenne Gerard560 E. Germann Road, Suite 103, Gilbert, [email protected] 114Finetech supplies rework equipment for a wide range of applications. The Fineplacer® Core provides precise temperature and convection flow control, outstanding placement accuracy, and robust process development for advanced applications. The Expert 10.6 delivers automated component alignment, large board handling, non-contact residual solder removal and solder paste/flux dispensing. For a manual, cost-effective solution, the Expert 5.6 handles the complete rework process with a high-resolution camera for fast, accurate and reproducible placement results. Complimentary units for standalone BGA-CSP reballing and contactless extraction of residual solder are also available.

Booth 3136


EXHIBITOR A-Z

Fuji America Corporation

Christine Paliferro171 Corporate Woods Pkwy., Vernon Hills, [email protected] Fuji Corporation name is synonymous with reliability and trustworthiness. Not only is Fuji Corporation a global leader as a machine tool builder, Fuji Corporation ensures productive manufacturing of countless additional companies in almost every industry around the world. Fuji Corporation, is simply, the standard.

Garland Service Company

Britt Smith714 Shepherd Drive, Garland, [email protected] Service Company (GSC) is a company that specializes in the design and manufacturing of tooling and fixtures associated with the electronics manufacturing industry as well as serving as a machining center for various other industries. We are ISO 9001 certified and ITAR Registered.

Glenbrook Technologies

Steven Zweig11 Emery Ave., Randolph, [email protected] Technologies is a leading worldwide manufacturer of x-ray inspection systems with over 2,800 installations in 62 countries worldwide. We offer a complete line of systems ranging from benchtop to fully automated. Our systems are in use by the leading medical device manufacturers and electronic contract manufacturers. Glenbrook has offices in the US, Germany and Hong Kong.

Global SMT

Penny JerniganPO Box 2338, Immokalee Road, Naples, [email protected] SMT & Packaging is the EMS industry’s leading media brand, reporting on new technologies and processes related to electronics manufacturing. The monthly magazine is supported by websites, newsletters and video channels with regular panel discussions and a Tech Talk Thursday vodcast. The company also hosts the Global Technology Awards, eSmart Factory and LTS Conferences.

Hanwha Techwin

Clay Parkley6000 Phyllis Drive, Cypress, [email protected] Techwin delivers a comprehensive line of security cameras and surveillance solutions for analog and network based systems.

Inovaxe Corporation

Margy Khoshnood260 SW 12th Ave., Deerfield Beach, [email protected] provides innovative SMART Material Storage and Handling Systems. Our Ultra Lean Total Material Handling Solutions address the challenges of dealing with SMT components and kits within the manufacturing stockroom and WIP locations and facilitates vendor managed inventory. Find your materials in seconds utilizing InoAuto SMART Mobile Storage Carts and Racks, Stationary Stockroom and line side storage racks and our InoBar; intelligent storage for Reels, Tubes, JEDEC trays, PCBs, Solder Stencils, Bulk Items, Mechanical Bins, and Moisture Sensitive Devices, along with the Stockroom Management and Inventory Locator Software tools.

Booth 3312

Booth 3212

Booth 3120

Booth 3336

Booth 3013

Booth 3307


Insituware

Amanda Higbee107 Gilbreth Pkwy., Suite 202, Mullica Hill, [email protected] is a materials solutions provider that is revolutionizing the way materials are measured to help manufacturers establish world-class quality control processes. Insituware has incorporated technology advancements such as data analytics and machine learning that now make it possible to easily control materials on a manufacturing floor. With the Vision MARK-1’s capability to monitor materials behavior, companies can increase throughput, reduce costs, and improve reliability.

EXHIBITOR A-Z

Inventec Performance Chemicals

Leo Ibarra500 Main Street, Suite 18, Deep River, [email protected] PERFORMANCE CHEMICALS, a company of the Dehon group, is a global provider of SOLDERING, CLEANING & COATING materials for Electronic, Semiconductor and Industrial applications.

IPC

Alicia Balonek3000 Lakeside Drive, 105 N, Bannockburn, [email protected] IPC is the global association that helps OEMs, EMS, PCB manufacturers, cable and wiring harness manufacturers and electronics industry suppliers build electronics better. IPC members strengthen their bottom line and build more reliable, high-quality products through proven standards, certification, education and training, thought leadership, advocacy, innovative solutions and industry intelligence.

Island SMT

Chris Hornung5505 Johns Road, Suite 709, Tampa, [email protected] of MEK AOI inspection systems and ASH Vision digital microscopes. Also, offers In Circuit Test repair services and parts.

ITW EAE

Erica Candela35 Parkwood Drive, Suite 10, Hopkinton, [email protected] EAE is a developer and provider of capital equipment used in electronics manufacturing, and is found in premier printed circuit board (PCB) assembly facilities the world over. ITW EAE comprised with industry-leading brands: MPM stencil printing equipment for electronic materials; Camalot Systems fluid dispensers; Electrovert reflow soldering, wave soldering, and curing, and cleaning equipment; Vitronics Soltec selective soldering, reflow soldering and wave soldering equipment; and Despatch industrial oven and furnaces.

JBC Tools. Inc.

Jose Larrea9296 Dielman Industrial Drive, Saint Louis, [email protected] EAE is a developer and provider of capital equipment used in electronics manufacturing, and is found in premier printed circuit board (PCB) assembly facilities the world over. ITW EAE comprised with industry-leading brands: MPM stencil printing equipment for electronic materials; Camalot Systems fluid dispensers; Electrovert reflow soldering, wave soldering, and curing, and cleaning equipment; Vitronics Soltec selective soldering, reflow soldering and wave soldering equipment; and Despatch industrial oven and furnaces.

JUKI AUTOMATION SYSTEMS

Carlos Eijansantos5151 McCrimmon Pkwy., Suite 200, Morrisville, [email protected] 130JUKI Automation Systems supplies leading SMT assembly solutions for the Electronic Industry throughout the world.

KIC

Allene Bailey16120 W. Bernardo Drive, San Diego, [email protected] provides solutions for challenges such as handling process audits, automating manual profiling and data reporting tasks, MES connectivity, Industry 4.0 implementation, NPI process setup, reducing solder defects (voiding, head in pillow, tombstoning), and more. KIC’s newest product WPI, Wave Process Inspection, provides users with automatic profiling – including an industry first dwell time and parallelism measurement for each production board – real-time preheat and wave analytics, automatic SP charting and more.

Booth 3226

Booth 3435

Booth 3237

Booth 3437

Booth 3425

Booth 3129

Booth 3439

Booth 3101


EXHIBITOR A-Z

Koh Young America

Brent Fischthal1950 Evergreen Blvd., Suite 200, Duluth, [email protected] 2002, we launched the first 3D SPI using patented dual-projection Moiré technology. Since then, we became the industry leader in True3D™ measurement-based inspection. Through our technological innovations, we secured thousands of global customers and maintain the largest share in SPI and AOI markets. Our user-centric R&D and global offices help us leverage core competencies to develop award-winning solutions to solve your challenges. Learn why so many manufacturers trust Koh Young for reliable inspection: www.kohyoungamerica.com.

Kulicke & Soffa

Tanja Lieshout1005 Virginia Drive, Fort Washinton, [email protected] & Soffa (NASDAQ: KLIC) is a leading provider of semiconductor and electronic assembly solutions serving the global automotive, consumer, communications, computing, and industrial markets. Founded in 1951, K&S prides itself on establishing foundations for technological advancement - creating pioneering interconnect solutions that enable performance improvements, power efficiency, form-factor reductions, and assembly excellence of current and next-generation semiconductor devices. Your ally in technological discovery, always.

KYZEN Corporation

Hannah Nelms430 Harding Industrial Drive, Nashville, [email protected] has been pioneering award-winning, environmentally responsible, advanced cleaning technologies since 1990. By fusing our commitment to groundbreaking science in cleaning chemistries along with our dedication to research with the care for your manufacturing cleaning process, we continuously improve our cleaning agents and problem solve to create the most effective cleaning products and solutions to suit your specific needs.

Booth 3319 Booth 3119

Kolb Cleaning Technology GmbH

Patty Chonis410 S. Sunset Street, Suite #C, Longmont, [email protected] Cleaning Technology was established more than 30 years ago, and continues to set the standards and benchmarks with cleaning processes. Kolb offers an integrated solution – cleaning systems for PCB, stencils and tools cleaning coupled with innovative and process optimized cleaning detergents. All systems correspond to the economic and environmental requirements today and of the future.

Booth 3117 Booth 3325


Linkage Technologies

Moira FordPO Box 802, Chanhassen, [email protected]"Supplying rigid, flexible, rigid-flex aluminum clad Printed Circuit Boards. By consolidating your spend into our sourcing program, we will leverage our buying power to get you the best possible pricing and service. We provide low-cost region factory solutions to all your PCB needs. We do this with integrity and transparency the same as a trusted member of your inside PCB sourcing team. Quality Certs: TS 16949, ISO 13485, ISO 14001, ISO 9001, AS9100"

MacDermid Alpha Electronics Solutions

Michelle O'Brien245 Freight Street, Waterbury, [email protected] Alpha Electronics Solutions (MAES) provides solutions that enable the manufacture of extraordinary electronic devices at high productivity and reduced cycle time. Through the innovation of specialty chemicals and materials under our Alpha, Electrolube, Kester, Compugraphics, and MacDermid Enthone brands, MAES provides solutions that power electronics interconnection. We serve all global regions and every step of device manufacturing within each segment of the electronics supply chain.

EXHIBITOR A-Z

Magnalytix, LLC

Hannah Nelms424 Harding Industrial Drive, Nashville, [email protected] in 2018 by industry experts Dr. Mike Bixenman and Mark McMeen, Magnalytix is at the forefront of an ongoing revolution in cleanliness reliability testing, bringing a new level of consistency and confidence to manufacturers and OEMs. Components are getting smaller, and electronics are playing a greater role in our daily lives. Reliability matters more than ever. In today’s miniaturized manufacturing environment, precision cleaning process reliability is critical. With products from medical devices, to military weapons, to self-driving automobiles, reliable electronics can be the difference between life and death. Magnalytix is ready with game-changing solutions that run in real-time in your process, on the factory floor.

Metallic Resources

Chad Rothschild2368 E. Enterprise Pkwy., Twinsburg, [email protected] usMetallic Resources is comprised of “hands-on” industry experts who understand the metallurgy of solder and mechanics of soldering. Technical orientation in the practical aspects of electronic assemblies soldering processes results in superior problem solving capabilities and recommendation of special needs for each individualized soldering process in the electronics market. Continual innovation and refinement of manufacturing methods results in a family of highest quality electrolytic solders guaranteed to improve the quality of finished goods, while at the same time lowering production soldering costs. Local sales representatives and strategically located stocking distributors provide support throughout the United States and the world.

Mid America Taping & Reeling

Barbara Pauls6601 Lyons Road, Coconut Creek, [email protected] America Taping and Reeling Inc. offers the following services: axial, radial, and surface-mount lead taping; programming; dry packing; baking; and lead tinning and forming. The company designs and manufactures custom carrier tape and take-up reels, and distributes cover tape. Mid America is an ISO 9001:2015 certified and 100% woman-owned and operated registered company by WBNC.

Mirtec Corp.

Rob Horowitz3 Morse Road - 2A, Oxford, [email protected]"MIRTEC is a leading global supplier of 3D & 2D Automated Optical Inspection (AOI) and Solder Paste Inspection (SPI) Systems to the electronics manufacturing industry. Among the many strengths are the ease of programming and the flexibility to be used anywhere in the manufacturing process. MIRTEC invests heavily in research & development, focused on using state of the art optics, lighting and Moire technology in the development of our systems."

Booth 3429

Booth 3333

Booth 3438

Booth 3225

Booth 3229

Booth 3500


EXHIBITOR A-Z

Nihon Superior

Keith HowellNS Bldg., 1-16-15 Esaka-Cho, Suita City, [email protected] Superior was founded in 1966 when it began marketing unique flux products imported from the US. Since then, we have made our mark on society by gathering the most advanced soldering and brazing technologies and products from around the world, and supplying them to companies in the metal-joining industry.

Nikon Metrology

Andy Stults12701 Grand River Road, Brighton, [email protected] Metrology offers the broadest range of metrology solutions including X-ray systems and microscopes for applications ranging from miniature electronics and surface-mount technology to the largest aircrafts. Nikon Metrology’s innovative measuring and precision instruments contribute to a high performance design-through-manufacturing process that allows manufacturers to deliver premium quality products in a shorter time. Further information is available on www.nikonmetrology.com

NSW Automation Sdn. Bhd.

Nicole YapNO.1, Jalan Beringin Batu Maung, Bayan Lepas, [email protected] We supply advanced precision fluid dispensing solutions to microelectronics and semiconductor producer for device assemblies such as 5G components, 01005 dispensing, 008004 solderings, MEMS, SiP, PoP, CSP and wafer-level packaging applications."

Omron

Krissy Sorensen2895 Greenspoint Pkwy., Suite 200, Hoffman Estates, [email protected] Manufacturer of control equipment, factory automation systems, electronic components, automotive electronics, ticket vending machines and medical equipment.

OSI Electronics, Inc.

Jason Leimer8044 Erie Ave., Chanhassen, [email protected] For over 35 years, OSI Electronics has provided Manufacturing Solutions of the highest quality, reliability, and customer support. We specialize in customized Manufacturing Solutions with the portfolio of services, capabilities, and factory locations needed to provide our customers with a competitive advantage in the global marketplace.

PARMI

Jessica Jurek9853 Pacific Heights Blvd., Suite N, San Diego, [email protected] PARMI Co., Ltd. is a technology-intensive corporation that develops and supplies in-line 3D inspection machinesused in a wide variety of applications ranging from SMT manufacturing to semiconductor processes.

PFC Flexible Circuits

Chris Keirstead 11 Canadian Road #7, Toronto, [email protected] PFC Flexible Circuits designs, manufactures, and assembles Flexible Circuits for both commercial and military applications. It specializes in fine line down to 0.002” circuitry, multilayer circuits including rigidflex, flex heaters, as well as providing an in house SMT assembly line. It’s Mil, UL and ISO 9002 and ISO 13485 certifications, quick turn prototype, pilot runs, and full production manufacturing is done. It’s front end engineering team focuses on DFM and fabrication methods that provide the best possible product reliability for subsequent assembly stages and in field performance.

Pillarhouse

Adrian De'Ath201 Lively Blvd., Elk Grove, [email protected] 121 Pillarhouse is the world leader in the design and manufacturing of selective soldering systems from hand-load (batch) processes to fully automated high-speed lines. Pillarhouse manufactures a wide range of modular and hand load equipment to fit the changing marketing market needs of today. Our product range includes the following: Bench Top, Hand-Load, inline modular and multi station high speed lines plus large board machines up 24 x 36.

Booth 3301

Booth 3201

Booth 3339

Booth 3214

Booth 3518

Booth 3116

Booth 3232

Booth 3324


EXHIBITOR A-Z

Precision PCB Services, Inc.

Dennis O'Donnell1750 Mitchell Ave, Oroville, [email protected] 530-403-9103"Precision PCB Services, Inc. is a distributor of BGA Rework Stations. With over 15 models to choose from, we can provide a BGA Rework Station to fit your process requirements and budget. In addition, we provide employee training, process consulting, manufacturing process implementation, PCB Rework and BGA Rework Services. With over 30 years of experience, we can implement or fine tune a high yield process for your specific requirements."

Retronix

Phil MyersRetronix House, Coatbridge, [email protected] 302Retronix is a global business operating in the Americas, Asia, and across Europe. Retronix offers technical solutions for the refurbishment and repair of electronic components to the electronics market. Main services include Reballing, Robotic Hot Solder Dip, Component Testing, and Component Reclaim. Retronix is a key member of the component supply chain, offering alternatives to customers facing component shortages and obsolescence.

SAFI-Tech, Inc.

Darin Heisterkamp1575 Food Sciences Building, 536 Farmhouse Lane, Ames, [email protected] forms lead-free solder metal alloys like SAC305 into supercooled liquid metal microcapsules, keeping the metal in a liquid state well below its freezing point inside a nanofilm shell. Dissolving the shell in a chemical activation process similar to solder reflow releases the liquid metal to create solid full metal conductive interconnects, but at dramatically lower processing temperatures. SAFI-Tech mitigates defects caused by coefficient of thermal expansion mismatch and thermal damage to components and materials.

SCHUNK Electronic Solutions

Marilyn Beaver211 Kitty Hawk Drive, Morrisville, [email protected] Electronic Solutions (SES) is setting standards in the field of depaneling technology by offering solutions for the entire spectrum of the depaneling operation — from product selection, workpiece holder solutions and optimization of milling parameters to commissioning. Depaneling machines from SES are high-performance machines for the depaneling of single circuit boards with electronic components. The SES product range focuses on modern processes in electronic component production. Our systems and devices meet the most demanding requirements.

Booth 3433

Booth 3224

Booth 3334

Booth 3400


EXHIBITOR A-Z

Scienscope

Marilu Correa5751 Schafer Ave., Chino, [email protected] is an industrial (NDT) solution provider. We are committed to the best price to performance ratio. Scienscope began in 1994, serving all manufacturing areas in North America. Now, we have expanded our services globally through a network of technical sales representatives and distributors. Our mission is to provide the most innovative and cost-effective solutions for your manufacturing process.

Seica Inc.

Crystal Meneses110 Avco Road, Haverhill, [email protected] provider of automated test & laser selective soldering solutions. Seica has provided legacy solutions with software TPS program converters for many obsolete test systems. A supplier to the TPS & repair market, the Pilot flying prober can regenerate lost data & validate IP infringements.

Seika Machinery

Michelle Ogihara21241 S. Western Ave., Suite 140, Torrance, [email protected] 128Since 1994, Seika Machinery has continuously provided a wide variety of high quality and reliable production equipment with accompanying engineering support services for the electronics and general manufacturing industries. Among its popular lines include the McDry dry cabinets, the Sawa ultrasonic cleaners, the Sayaka PCB depanelers, the Malcom process control systems, the Unitech PCB cleaners, the Hioki flying probe testers, the Kyowa strain gages, the N-1 Checker FAI and much more.

Shenmao America

Maggie Chi2156 Ringwood Ave., San Jose, [email protected] 520-8341Founded in 1973, Shenmao offers total solutions of solder material. As the third largest solder material provider, Shenmao produces SMT solder paste, semiconductor packaging solder spheres, wafer bumping solder paste, dipping flux, wave solder bar, solder wire, flux and solder preforms distributed from 10 worldwide locations. Using only ultra-pure virgin raw material to produce high-quality products, Shenmao strictly controls each step from production to shipment. Shenmao works hard helping customers remain competitive, creating a win-win situation.

Simplimatic Automation

Lee Crawford1046 W. London Park Drive, Forest, [email protected]’s design philosophies have been highly regarded by the electronics industry since 1988, before the proliferation of surface-mount technology. We have tested countless belt types, frame designs, and electronic components to provide SMT and through-hole technology (THT) manufacturers with the most reliable, best performing material handling and automation equipment on the market. We provide equipment such as automated conveyors, material handling equipment, and custom automation products to printed circuit board (PCB) fabricators, manufacturers, and assemblers.

Smart Splice LLC

Larry Welk1746 Starbridge Drive, Surfside Beach, [email protected]"Smart Splice is the recognized leader in the sales and service of tape splicing materials, tools, and accessories in the PCB industry. Since the introduction of the Professor Splice Channel on YouTube a year and a half ago, we have become the go to instructional company for teaching any company how to get the highest production rates on ANY pick and place machine! With the introduction of the latest tape splicing sensation, double edge splice tape, you owe it to yourself (and your company) to visit our booth and get “schooled by the professor”!"

Booth 3139

Booth 3432

Booth 3506

Booth 3203

Booth 3220

Booth 3107


EXHIBITOR A-Z

Smartsol Technologies

Ana Karen CarrilloProl. Pino Suarez 1039 int 36, Col. El Vigia, Zapopan, [email protected] are a supplier with the expertise in process analysis and consulting for the High-Tech Industry, includes industrial, electronics, automotive, aerospace, metalworking, medical, telecommunications and commercial sectors. We help our customers to optimize and automate their production processes; our services include: Sales representation, distribution of equipment and supplies, technical support, spare parts, process consultancy, training and equipment rental.

SMT Today / i4.0 Today

Stacey Bonnar1 Dow Road, Prestwick, Ayrshire, [email protected] (0)1292 834 009Born in 2013 SMT Today is a team bursting with years of experience in online and offline marketing. Creating the first high quality, industry leading magazine for the world of electronics, we quickly grew to be the clear market leader. By delivering quality content through the widest range of multi-media channels and platforms, our strategy is driven by success. 2017 saw the launch of i4.0 Today, our exclusive platform dedicated to the concept, technology and future of Industry 4.0. The only dedicated Industry 4.0 magazine in the electronics industry, offering digital and print marketing for our clients as well as opportunities to speak at events."

SMTXTRA

Paul Pittman1738 Triangle Park Drive, Maryville, [email protected] Xtra are a Global electronics specialists, providing productivity enhancing solutions for the global Surface Mount electronic assembly sector SMT Xtra.

Specialty Coating Systems

Brittney Dial7645 Woodland Drive, Indianapolis, [email protected] Coating Systems is a leader in Parylene and liquid conformal coating services and technologies with 50 years of experience and 20 worldwide locations. SCS conformal coatings offer excellent moisture, chemical, and dielectric barrier properties to protect components in the aerospace, defense, medical device, transportation and electronics industries. SCS also offers industry-leading liquid coating systems, including spray, spin and dip coating systems, thermal and UV cure systems and ionic contamination test systems.

StaticStop/SelecTech Lab Flooring

Joe Berkowitz33 Wales Ave., Unit F., Avon, [email protected], a division of SelecTech, Inc, has the most complete line of ESD flooring solutions and technical knowledge available. We offer a range of glue-down tiles with conductive adhesive, ESD carpet, conductive epoxies and our patented FreeStyle and SelecTile interlocking systems that install without downtime and can be installed over existing flooring and carpet. We also carry a complete line of ESD flooring maintenance products to keep your critical floors last long and work properly. SelecTech has your Floors Covered! StaticStop offers the most complete line of ESD/Static Control flooring solutions that meet all ANSI 20.20 requirements. We have all the cleaning & maintenance products to keep your ESD Floors looking and performing great for the life of your floor. SelecTech Lab Floors offer complete Lab flooring solutions! SelecTech Lab Flooring meet all FDA, USDA, CDC requirements & guidelines. With our patented FreeStyle Interlocking systems, you will Save Time, Money and Disruption.

Booth 3132

Booth 3137

Booth 3302

Booth 3206

Booth 3528


EXHIBITOR A-Z

Steel Camel

Dan Jenkins3347 S. Westshore Blvd. #8, Tampa, [email protected]"Steel Camel manufacturers products to remove and block moisture from Moisture Sensitive Devices. Products include desiccant bags and air compressor filters that are alternatives to Silica Sand and Clay beads. Steel Camel is currently testing desiccant bags in Moisture Barrier Bags to remove embedded and diffused moisture in MSDs using Test IPC-TM-650 Method 2.6.28 to replace heat and oven methods."

StenTech

Ken Martinez16080 Table MT Pkwy., Suite 100, Golden, [email protected] is the Mission of StenTech to provide our customers with unparalleled customer service, technical expertise, exceptional quality and on-time delivery with a kaleidoscope of product offerings supporting their Surface Mount Technology (SMT) requirements. StenTech offers a wealth of knowledge and technical expertise in designing stencils, wave solder pallets and SMT carriers. In addition, StenTech manufactures press fit fixtures, vacuum support fixtures, hand soldering fixtures and router fixtures, as well as in-circuit test fixtures and functional test fixtures.

Sunshine Global Circuits

Elena Wang3400 Silverstone Drive, Suite 139, Plano, [email protected] Global Circuits is a Premier Direct manufacturer of Printed Circuit Boards. 2L-36L, HDI, high speed materials, and rigid-flex , flex, heavy copper , RF, 10+ layer counts etc. We are a high mix, high tech, low to high volume production PCB manufacturer, a Sales office with technical support in Plano TX, a prototype manufacturing facility in Germany and 2 manufacturing facilities in China.

Swanstrom Tools USA

Erin Swanstrom3300 James Day Ave., Superior, [email protected] x 106Swanstrom Tools is the leader in innovation in the precision hand tool industry, offering cutting edge solutions for the most demanding cutting applications. Swanstrom Tools manufactures high-end precision cutters, pliers, and tweezers for the medical device, injection molding, electronics, avionics, and jewelry industries. Swanstrom Tools also offers a full line of pneumatic cutters for automated processes. All tools are proudly made in the USA.

Teradyne

Kristina Lee500 Riverpark Drive, M/S NR500-1 N., Reading, [email protected] tests and helps build the world’s most innovative products. Our leading-edge testers make sure that new products work right the first time, every time. And our portfolio of industrial automation solutions helps manufacturers to develop and deliver new products quickly, efficiently and cost-effectively.

Test Research, Inc.

Larry Chen7th Floor Number 45, Dexing W. Road., Shihlin Dist., Taipei [email protected] 2217Test Research, Inc. (TRI) offers the most robust product portfolio in the industry for Automatic Test and Inspection solutions. From Solder Paste Inspection (SPI), Automated Optical Inspection (AOI), and 3D Automated X-ray Inspection (AXI) systems to Manufacturing Defect Analyzers (MDAs), In-Circuit Test equipment (ICT), and Functional Testing (FCT), TRI provides the most cost-effective solutions to meet a comprehensive range of manufacturing Test and Inspection requirements. Learn more at www.tri.com.tw.

Booth 3033

Booth 3326

Booth 3315

Booth 3241

Booth 3401

Booth 3200


EXHIBITOR A-Z

Tintronics

Tom OttPO Box 18335, Huntsville, [email protected] Component level value add services that meet or exceed industry specifications that are required by our ever-changing, fast paced electronics marketplace. Providing XRF analysis, State of the Art Robotic Mitigation/ Hot Solder Dip/Gold Removal/solderability enhancement/BGA repair and reball/ Surface mount tape and reel / thru-hole tape and reel / lead form & excise of SMT devices/ Thru-hole lead form / Dry-packaging / Cleanliness Testing/ Solderabilty Testing. J-STD, Mil-STD, GEIA, EIA, AS9100 REV. D ISO9001:2008, SDVOSB

Transforming Technologies LLC

Craig Zander3719 King Road, Toledo, [email protected] Technologies is a provider of quality static control products that meet or exceed industry standards at an excellent value. We provide outstanding customer service and support. Our product categories include: Grounding, Apparel, Ionization, Matting, Test and Measurement and Cleanroom. For our full line, see us at www.transforming-technologies.com.

Trans-Tec America/Yamaha

Cindy Hoke7301 W Boston Street, Chandler, [email protected]"As the leading distributor of Yamaha SMT equipment solutions in North America, Trans-Tec America is one of the longest-standing global partners for integrated modular assembly lines worldwide. With dedicated industry experience spanning from its inception in 1988, Trans-Tec has developed an excellent reputation for delivering exceptional products and services."

U.S. Tech

Michael Skinner10 Gay Street, Phoenixville, [email protected]. Tech is the leading international, high-tech trade publication that covers the electronics manufacturing industry. Focused on innovations in PCB assembly, test and inspection, and manufacturing services, each edition is delivered to more than 100,000 subscribers in print, two digital versions, and distributed across all major social media platforms. Current and past issues are available online at www.us-tech.com.

Universal Instruments

Kristi Schilloff33 Broome Corporate Pkwy., Conklin, [email protected] offer a wide range of solutions for Traditional to Complex Printed Circuit Board Assembly for applications requiring high-speed, high-accuracy surface mount placement and through-hole component insertion. Precision Automation for applications requiring versatile, high-accuracy, high-speed handling, inspection, and assembly. Advanced Packaging for applications requiring efficient and versatile multi-die high-accuracy assembly. And, our world-renowned Advanced Process Lab (APL) offers solutions for all aspects of a product lifecycle- from prototyping, process development, and analytical services to advanced technology assembly.

Viscom

Jody Tutwiler1775 Breckinridge Pkwy., Suite 500, Duluth, [email protected] range of industry award winning optical (AOI) and X-ray (AXI) inspection equipment for PCB assembly. In-line and stand-alone inspection of paste, placement, post-reflow, post-wave, selective solder and conformal coating. 100% solder joint inspection to IPC standards, high speed and high performance 3D solutions for every application. Microelectronics inspection equipment for bond, thick film and conductive glue. Heavy duty and large PCB inspection capability. Check out our award winning systems at www.viscom.com.

Booth 3403

Booth 3228

Booth 3113

Booth 3035

Booth 3007

Booth 3300


EXHIBITOR A-Z

VisiConsult X-Ray Solutions Americas

Ronaldo Novaes1170 Howell Mill Road, Suite 300, Atlanta, [email protected] VCcount, first-class solution is particularly important, launched on 2021 the latest generation of the SMD reel X-ray counting system XRHCount from VCcount. The highlights are the new touchscreen-optimized user interface and the cycle time of under 8.5 seconds per SMD reel including barcode recognition. New user interface that makes easy operational handling. Native software for integration with any external platform ERP/MES, storage tower or any other feasible integration where usage of data makes higher operational performance. Stop by on our booth# 3109

Vitrox USA

Richard Osborne3222 Arden Road, Hayward, [email protected] (SPI), AOI, AXI and Conformal Coat/Final Inspection provider to the worlds largest and most demanding EMS companies. Proven inspection technology that yields the easiest to program solutions with the best and most detailed data outputs available. Utilizing actual AI which is available now, time to inspect is decreased and yields increased. Data from the printer, pick and place and inspection is all corelated to provide real-time views of production yields. All with World Class Service and Support.

VJ Electronix

Katie Marzocchi19 Alpha Road, Chelmsford, [email protected] Electronix, Inc. is a global leader in advanced rework technologies, and provider of x-ray solutions for inspection and component counting. VJE combines years of industry leadership, technical expertise, and product development knowledge to manufacture state-of-the-art x-ray and SMT rework equipment that boosts the productivity of high-value, high-precision applications in electronics manufacturing and industrial markets worldwide.

V-TEK, Inc.

Carol Boyum751 Summit Ave., Mankato, [email protected] Inc is a full-service solutions provider of tape and reel packaging technologies. We offer boutique and volume contract packaging services, we distribute carrier tape materials, and we design, build, and support a full line of equipment for packaging components. Our automatic machines can handle parts into and out of trays, carrier tape, tubes, and bulk, with optional integrated electrical test and visual inspection. We can handle your packaging needs.

WPI Inc.

Steve Dunn175 Sarasota Blvd., Sarasota, [email protected] Vision, a division of World Precision Instruments, introduces ERMA™, a 3-D INSPECTION SCOPE FOR YOU. ERMA boasts of many industry firsts: 3-D viewer, variable working distances, computer controlled self-focusing zoom, area of interest, large field of view and depth of field. With ERMA you will increase your throughput and enjoy greater accuracy. This enhanced reality microscope is Ideal for rework, through-hole assembly and inspections. WPI has been designing innovative equipment for over 50 years.

ZESTRON Corporation

Scott Pechnick11285 Assett Loop, Manassas, [email protected] is the global leading provider of high precision cleaning products, services and training solutions for the electronics and semiconductor manufacturing industries. Whether implementing a new cleaning process, optimizing an existing one or preparing for future design changes, our industry leading products, eight worldwide Technical Centers and global expert engineering teams ensure that our customers can overcome any precision cleaning challenge.

Booth 3109

Booth 3244

Booth 3407

Booth 3218

Booth 3534

Booth 3207


ELANTAS PDGMacDermid Alpha Electronics SolutionsMid America Taping & Reeling, Inc.Seika Machinery, Inc.

KYZEN CorporationUniversal InstrumentsZESTRON Corporation

Aegis Software

Conductive ContainersEuroplacer AmericasSeika Machinery, Inc.Smartsol Technologies

InsituwareITW EAEKYZEN CorporationMacDermid Alpha Electronics SolutionsSeika Machinery, Inc.Smartsol TechnologiesZESTRON Corporation

ELANTAS PDGInsituwareITW EAENSW AutomationSpecialty Coating Systems

ASMCLUSO North AmericaEuroplacer Americas Inc.Fuji America CorporationMid America Taping & Reeling, Inc.Smartsol TechnologiesUniversal Instruments

PRODUCT FINDER

Adhesives and Sealants

Analytical and Laboratory

Cluso North America/Brock Electronics Ltd.KYZEN CorporationUniversal InstrumentsZESTRON Corporation

Barcode, Scanning, RFID

Cluso North America/Brock Electronics Ltd.

Barcode, Scanning, RFID

CAD, CAM, CIM, EDA

Circuit Board Handling

Cleaning and Solvents

Coating, Dispensing and Masking

Component Insertion

Cluso North America/Brock Electronics Ltd.Scienscope InternationalSmartsol TechnologiesTintronics IndustriesVisiConsult X-ray Solutions Americas Corp.VJ Electronix, Inc.

Component Prep and Counting

Cluso North America/Brock Electronics Ltd.MagnalytixScienscope InternationalSmartsol Technologies

Components and Hardware

CIRCUITS ASSEMBLYGlobal SMT & PackagingU.S. Tech

Consulting and Market Research


PRODUCT FINDER

ASMFinetechKulicke & SoffaZESTRON Corporation

Die and Wire Bonding

Cluso North America/Brock Electronics Ltd.Seika Machinery, Inc.Smartsol TechnologiesSmart Splice LLC

SCHUNK Electronic SolutionsSeika Machinery, Inc.Smartsol Technologies

Aven Inc.CLUSO North AmericaConductive ContainersSeika Machinery, Inc.Smart Splice LLC

ASMFuji America CorporationKulicke & SoffaSmart Splice LLC

Distributor/Manufacturer's Representative

Drilling, Routing and Dicing

ESD and EOS

Feeders

Europlacer AmericasFinetechFuji America CorporationKulicke & SoffaUniversal Instruments

Smartsol TechnologiesSmart Splice LLCSwanstrom Tools USA, Inc.

ASC International, Inc.ASMCLUSO North AmericaInsituwareKoh Young AmericaMagnalytixMIRTEC Corp.OmronSeika Machinery, Inc.Smartsol TechnologiesViscom, Inc.ViTrox

Cluso North America/Brock Electronics Ltd.ELANTAS PDG, Inc.Smartsol Technologies

Flip Chip and Multichip

Hand Tools and Shop Supplies

Inspection and Measurement

Labeling, Ink and Marking

ASC International, Inc.Smartsol Technologies

Laser Systems


CLUSO North America Conductive ContainersEuroplacer AmericasInovaxe CorporationInsituwareKulicke & SoffaSCHUNK Electronics SolutionsSeica Inc.Seika Machinery, Inc.Smartsol TechnologiesSmart Splice LLCSpecialty Coating Systems

PRODUCT FINDER

Materials Handling Equipment/Automation Systems

Odd Form Placement

ASMCLUSO North AmericaEuroplacer AmericasFinetechKulicke & SoffaSmartsol TechnologiesUniversal Instruments

CLUSO North AmericaITW EAESeika Machinery, Inc.Smartsol TechnologiesSpecialty Coating Systems

CLUSO North AmericaConductive ContainersELANTAS PDGFinetechMid America Taping & Reeling, Inc.NSW Automation Sdn. Bhd.

Allfavor TechnologyAmerican Standard CircuitsNSW Automation Sdn. Bhd.

Ovens, Curing and Drying

Packaging and Encapsulating

PCB Fabrication


PRODUCT FINDER

ASMCLUSO North AmericaEuroplacer AmericasKulicke & SoffaSmartsol TechnologiesUniversal Instruments

CIRCUITS ASSEMBLYGlobal SMT & PackagingSMT Today LtdU.S. Tech

Pick and Place

Publications and Marketing

FinetechJBC ToolsKoh Young AmericaSmartsol TechnologiesTintronicsVJ Electronix, Inc.

MacDermid Alpha Electronics SolutionsMid America Taping & Reeling, Inc.NSW Automation Sdn. Bhd.

Aegis SoftwareAkrometrixASMCLUSO North AmericaEuroplacer AmericasFuji America CorporationKICKoh Young AmericaKulicke & SoffaMid America Taping & Reeling, Inc.

Fuji America CorporationJBC ToolsITW EAESeica Inc.Smartsol TechnologiesTintronics

Repair & Rework

Semiconductor Materials

Software and Programming

Soldering, Automated

Soldering, Manual

Fuji America CorporationJBC ToolsSmartsol TechnologiesTintronics


You can’t deliver quality products if you don’t excel at ordinary operations. With best-in-class inspection, Koh Young’s advanced 3D inspection technology and solutions optimize your PCBA manufacturing process. We ensure that you can improve your productivity and quality, while sustaining the flexibility to overcome current and future challenges.

Those who demand more, demand Koh Young.

Koh Young America, Inc.1950 Evergreen Blvd., Ste 200

Duluth, GA 30096 USA+1-470-374-9254

[email protected]

kohyoung.com

The Gateway to a Smart Factory


ASMCLUSO North AmericaEuroplacer AmericasFuji America CorporationInovaxe CorporationITW EAESmartsol Technologies

CLUSO North AmericaKulicke & SoffaMid America Taping & Reeling, Inc.Smart Splice LLCTintronics

ASC International, Inc.AkrometrixCLUSO North AmericaInsituwareKICKoh Young AmericaMagnalytixMIRTEC Corp.Seica Inc.Seika Machinery, Inc.Specialty Coating SystemsViscom, Inc.

Stencil and Screen Printing

PRODUCT FINDER

Tape and Reel

Test & Measurement Equipment

Fuji America CorporationKoh Young AmericaMagnalytixMIRTEC Corp.OmronSeica Inc.Seika Machinery, Inc.Smartsol Technologies

Koh Young AmericaSmartsol TechnologiesTintronics

Conductive ContainersELANTAS PDG, Inc.

CIRCUITS ASSEMBLYICAPE GroupIPCKYZEN CorporationSmart Splice LLCSTI Electronics, Inc.ZESTRON Corporation

AkrometrixCLUSO North AmericaMIRTEC Corp.OmronSmartsol TechnologiesViscom, Inc.ViTrox

ASC International, Inc.CLUSO North AmericaOmronScienscope InternationalSmartsol TechnologiesTintronicsViscom, Inc.ViTroxVJ Electronix, Inc.

Test, Automated

Test, Manual

Tooling and Fixtures

Training, Education, and Compliance

Vision Systems

X-ray and XRF

2021 event guide

Documents