You have registered in the 2020 Climate Solutions Meshwork.

After Self Registration, your email validation is emailed to you. If you haven’t received it, please check your SPAM folder.

The Meshwork connects you to People and to the most relevant Content. You can add Content to the meshwork to offer, buy, sell, give, receive or share with others.

Content in this meshwork can have one of the following subject types:

• Case Story• Challenge• Event• Financing Opportunity• Information• Project/Group/Organization• Idea

System requirementsTo use the full features of the software you need Flash player. Most browsers have it installed. If you need to install it, you can find it here: http://www.adobe.com/products/flashplayer/Supported web browsers are Firefox, Internet Explorer, Safari, Chrome and Opera (some version conditions apply). This is a BETA version of the meshwork site, so you can expect changes like addition of further user roles, places, interest areas etc.

Login to this address:http://www.2020climatesolutions.org/

v2.3

• Next step• Opportunity • Product/Service • Report • Research• Solution• Sponsorship Opportunity

Change your password, display name and email address.

Enter your profile. Add a photo and your Places, Interest Areas and Roles and the About Me field as a minimum.

In the Meshwork page, find People and Content matching Places, Interest Areas and Roles in the Meshwork.

In the Synchronicity page find people and content that match your profile and tags.

Add Content to offer, receive, buy, sell or share products, projects, ideas, etc.

Finding your way around the system

The following pages provide some tips for finding your way around the 2020 On-line Meshwork.

To get value from the online meshwork:

In the Scorecard, track the outcomes from the Country rating sessions (login using cop / cop).

Step 1 : Change Your Password and Language settings

If you wish to change your password, name and email address – click on “Settings” button (in the button bar). Note ‘Your name’ is not your login name. You created your login-name when you registered.

After clicking “Settings” you will see ‘Your name’, this is your ‘display’ name and is always shown near your ‘icon’ – the little picture of you that everybody sees on the site. Use Account password to change your password. You can select a language in the Language settings. (Please note that there might be some parts of the site that have not yet been translated fully). Once you have made changes, click the the ‘Save’ button at the bottom of the page.

Step 1 : Change Your Password and Language settings

If you wish to change your password, name and email address – click on “Settings” button (in the button bar). Note ‘Your name’ is not your login name. You created your login-name when you registered.

After clicking “Settings” you will see ‘Your name’, this is your ‘display’ name and is always shown near your ‘icon’ – the little picture of you that everybody sees on the site. Use Account password to change your password. You can select a language in the Language settings. (Please note that there might be some parts of the site that have not yet been translated fully). Once you have made changes, click the the ‘Save’ button at the bottom of the page.

Step 2 : Update Your Profile and Your Photo

To update your profile click on your outline icon in the button bar and then click ‘Edit Details’ (to the right of your name). You see the Meshwork Alignment checkboxes and profile fields. Please select the relevant Places, Interest Areas, Sectors and Roles. (It is essential to select one or more boxes in each category so that you will appear in the meshwork so all members of the meshwork can find people and information). If you prefer to keep some information private, choose the ‘Private’ option from the drop-list below any data you enter.

After you have filled in your details click the ‘Save’ button at the bottom of the page to save your profile information.

Step 2 : Update Your Profile and Your Photo

To update your profile click on your outline icon in the button bar and then click ‘Edit Details’ (to the right of your name). You see the Meshwork Alignment checkboxes and profile fields. Please select the relevant Places, Interest Areas, Sectors and Roles. (It is essential to select one or more boxes in each category so that you will appear in the meshwork so all members of the meshwork can find people and information). If you prefer to keep some information private, choose the ‘Private’ option from the drop-list below any data you enter.

After you have filled in your details click the ‘Save’ button at the bottom of the page to save your profile information.

Scroll down for:

Places, Interest Areas, Sectors & Roles

1. Browse – select your photo from your computer

2. Upload – uploads your selected photo from your computer

To add your photo click on your icon in the button bar, then ‘Edit Details’ (to the right of your name) then ‘Edit profile icon’ (in the left menu). Use the ‘Browse’ and ‘Upload’ buttons to have your photo displayed.

To add your photo click on your icon in the button bar, then ‘Edit Details’ (to the right of your name) then ‘Edit profile icon’ (in the left menu). Use the ‘Browse’ and ‘Upload’ buttons to have your photo displayed.

Step 3 : Find other People and Information Content in the Meshwork

Click on the ‘Meshwork’ icon in the button bar. You can browse or type-ahead to select a Place, Interest Area and Sector to see the People or Content for your selections (remember to click the ‘Go’ button after changing them), hover your cursor over a picture or icon to get more information.

Click a radio button next to a Role over in the left frame to see the people in that role. Use the Roles page and Results page controls to see all the information. To visit a person’s profile page or to navigate to a content or file click on the picture or icon.

Your profile is what defines your place in the meshwork, so it’s important that the data is kept up-to-date and is accurate so people can find you (see ‘Your Profile and Your Photo’ section above).

Step 3 : Find other People and Information Content in the Meshwork

Click on the ‘Meshwork’ icon in the button bar. You can browse or type-ahead to select a Place, Interest Area and Sector to see the People or Content for your selections (remember to click the ‘Go’ button after changing them), hover your cursor over a picture or icon to get more information.

Click a radio button next to a Role over in the left frame to see the people in that role. Use the Roles page and Results page controls to see all the information. To visit a person’s profile page or to navigate to a content or file click on the picture or icon.

Your profile is what defines your place in the meshwork, so it’s important that the data is kept up-to-date and is accurate so people can find you (see ‘Your Profile and Your Photo’ section above).

Click People

Click Content

Step 4: Explore Synchronicity

Click on the ‘Synchronicity’ icon in the button bar. This screen shows circles that represent both people and different types of information. The ones nearest to your photo are the People or/ Content that align the most with your place, interest area, sector and role (and also tags), they are the most similar to your profile. Hover your cursor over the circles to see the % alignment to the Person or Content (click on a circle to see more).

The blue circles signify people, the other colours are the different subject types of content and files, for example Case Story, Idea, Products, etc. Hover your cursor over a coloured button on the left to see the subject. You can select and deselect content types by clicking the check marks on the buttons.

Tip: If, when you have clicked on the ‘Synchronicity’ icon, the page is blank check that you have updated your profile - make sure you select at least one Place, Interest Area and Role as a minimum.

Step 4: Explore Synchronicity

Click on the ‘Synchronicity’ icon in the button bar. This screen shows circles that represent both people and different types of information. The ones nearest to your photo are the People or/ Content that align the most with your place, interest area, sector and role (and also tags), they are the most similar to your profile. Hover your cursor over the circles to see the % alignment to the Person or Content (click on a circle to see more).

The blue circles signify people, the other colours are the different subject types of content and files, for example Case Story, Idea, Products, etc. Hover your cursor over a coloured button on the left to see the subject. You can select and deselect content types by clicking the check marks on the buttons.

Tip: If, when you have clicked on the ‘Synchronicity’ icon, the page is blank check that you have updated your profile - make sure you select at least one Place, Interest Area and Role as a minimum.

Step 5 : Add Person as a Friend

There are two ways to do this: When viewing a person’s profile click on “Add friend” on the left. They will be added to your list of friends.

Step 5 : Add Person as a Friend

There are two ways to do this: When viewing a person’s profile click on “Add friend” on the left. They will be added to your list of friends.

On your Home Page in “Meshwork Members” or other places in this meshwork where you find an icon of a person - hover your cursor over a person’s icon and a little down arrow appears in the right lower corner; click on it and then on the drop down menu. Click “Add friend” - this adds the person to your list of friends.

On your Home Page in “Meshwork Members” or other places in this meshwork where you find an icon of a person - hover your cursor over a person’s icon and a little down arrow appears in the right lower corner; click on it and then on the drop down menu. Click “Add friend” - this adds the person to your list of friends.

If you want to go directly to your contacts hover your cursor over the “Tools” icon and select “Friends”.If you want to go directly to your contacts hover your cursor over the “Tools” icon and select “Friends”.

Step 6 : Add ContentSelect both ‘This is a …’ and ‘I want to …’ You must enter a Title, Microsummary, Key benefits and Content text so that your content is easily found in the meshwork. You can also add a relevant photo or image.After having entered your text and descriptive tags “Align Content with 2020 Climate Solutions Meshwork” by clicking the appropriate checkboxes.Before you publish your content set the “Access” to ‘Private’ if you want to keep it to yourself; to ‘Logged in users’ if you want other participants of this meshwork to be able to see it; or to ‘Public’ if you want any Internet user to be able to read your content. Click the ‘Save’ button at the bottom of the page.

Step 6 : Add ContentSelect both ‘This is a …’ and ‘I want to …’ You must enter a Title, Microsummary, Key benefits and Content text so that your content is easily found in the meshwork. You can also add a relevant photo or image.After having entered your text and descriptive tags “Align Content with 2020 Climate Solutions Meshwork” by clicking the appropriate checkboxes.Before you publish your content set the “Access” to ‘Private’ if you want to keep it to yourself; to ‘Logged in users’ if you want other participants of this meshwork to be able to see it; or to ‘Public’ if you want any Internet user to be able to read your content. Click the ‘Save’ button at the bottom of the page.

Step 6 : Content and Files

Hover your cursor over the “Tools” icon.

Select “Content” to publish information on opportunities, products, projects, etc. Content can include text (with or without pictures, illustrations, videos etc.)

Select “Files” to upload a file (PDF, presentation, document, or any other file type).

Select “Pages” if you want to work on text with others.

To publish content: See previous page, use button. To publish files: See next page.

Step 6 : Content and Files

Hover your cursor over the “Tools” icon.

Select “Content” to publish information on opportunities, products, projects, etc. Content can include text (with or without pictures, illustrations, videos etc.)

Select “Files” to upload a file (PDF, presentation, document, or any other file type).

Select “Pages” if you want to work on text with others.

To publish content: See previous page, use button. To publish files: See next page.

To publish a file: Select “Files” in the drop-down “Tools” menu and click on “Upload a file” on the left. Click on the “Browse” button to select the file from your computer. Select the appropriate “This is a …” and ‘I want to …’ for the file.It is obligatory to enter a Title, Microsummary and Key Benefits so the file is easily found in the meshwork. After having entered descriptive tags and possibly a description with an abstract.“Align file with 2020 Climate Solutions Meshwork” by clicking the appropriate checkboxes.Before you upload set the “Access” (same as in Create Content) finally click ‘Save’ at the bottom of the page.

To publish a file: Select “Files” in the drop-down “Tools” menu and click on “Upload a file” on the left. Click on the “Browse” button to select the file from your computer. Select the appropriate “This is a …” and ‘I want to …’ for the file.It is obligatory to enter a Title, Microsummary and Key Benefits so the file is easily found in the meshwork. After having entered descriptive tags and possibly a description with an abstract.“Align file with 2020 Climate Solutions Meshwork” by clicking the appropriate checkboxes.Before you upload set the “Access” (same as in Create Content) finally click ‘Save’ at the bottom of the page.