2020-01-eng. pricelist becx machines...2020-01-eng. pricelist becx machines.pdf created date...

BECXMACHINES.COM

EFFICIENTLY - RELIABLE - DURABLE

The validity of this price list is subject to potential printing errors.

PRICELIST 2020

1 HEDGE CUTTERHS75HR


Basic machine features 8cc motors(circa 24 liters/minute continuous volume flow needed)

BEC-HS75HR € 7.160,-

BEC-MP021 € 560,-

SPECIFICATIES

Additional cost flow regulator HS75HR

An HS75HR comes with 110 cm hoses featuring quick couplings.

All prices are exc packaging and transport cost.

Working width: 77 cmCutting capacity: up to 2.0 cmWeight: 73 kgMounting bracket: 80 x 80 mmMaximum revolutions: 3000 rpmRequired connections: Pressure - Return - Drain line (pressure-free)Required oil supply: circa 24 l/min (only available with 8cc motors)Min. - max. oil pressure: 180 - 210 bar

HEDGE CUTTER

becxmachines.com - [email protected]

SPECIFICATIES

2HS130HR

BEC-HS130HR € 9.220,-

BEC-MP001 € 130,-

BEC-MP006 € 560,-

Basic machine features 11cc motors(circa 30 liters/minute continuous volume flow needed)Additional cost 16cc motors instead of 11cc motors(circa 45 liters/minute continuous volume flow needed)

Additional cost flow regulator HS130HR


Working width: 127 cmCutting capacity: up to 2.5 cmWeight: 134 kgMounting bracket: 80 x 80 mmMaximum revolutions: 2500 rpmRequired connections: Pressure - Return - Drain line (pressure-free)Required oil supply: circa 30 l/min (featuring 11cc motors as standard)Min. - max. oil pressure: 180 - 210 bar


3 HEDGE CUTTER


Machine features 16cc motors(circa 45 liters/minute continuous volume flow needed)

HS131HR

SPECIFICATIES

BEC-HS131HR € 10.250,-

An HS131HR comes with adjustable overspeed safety valve, adjustable afterrunvalve and pressure relieve valves on allhydraulic motors.


Working width: 131 cmCutting capacity: up to 3 cmWeight: 159 kgMounting bracket: 80 x 80 mmMaximum revolutions: 2500 rpmRequired connections: Pressure - Return - Drain line (pressure-free)Required oil supply: circa 45 l/min (only available with 16cc motor)Min. - max. oil pressure: 180 - 210 bar


HEDGE CUTTERfor cutting and collectingHS131C

SPECIFICATIES

(circa 45 liter/minuut continue volumestroom nodig)BEC-HS131C € 11.180,-Machine features 16cc motors

4

An HS131C comes with adjustable overspeed safety valve, adjustable afterrunvalve and pressure relievevalves on allhydraulic motors.

An HS130C comes with 110 cm hoses featuring quick couplings.

Working width: 131 cmCutting capacity: up to 2 cmWeight: 159 kgMounting bracket: 80 x 80 mmMaximum revolutions: 2500 rpmRequired connections: Pressure - Return - Drain line (pressure-free)Required oil supply: circa 45 l/min (only available with 16cc motor)Min. - max. oil pressure: 180 - 210 bar



HEDGE CUTTER

Machine features 22cc motors(circa 45 liters/minute continuous volume flow needed)Additional cost flow regulator HS150HR

Additional cost rear mounting bracket HS150HR instead of original

Price separate rear mounting bracket HS150HR

5HS150HR

SPECIFICATIES

BEC-HS150HR € 11.600,-

BEC-MP005 € 605,-

BEC-MP004

BEC061200

€ 185,-

€ 320,-

An HS150HR comes with pressure relieve valves on the second and third hydraulic motor




HEDGE CUTTER 6HS210HR

SPECIFICATIES

BEC-HS210HR € 16.400,-Machine features 16cc motors(circa 90 liters/minute continuous volume flow needed)

BEC-HS210HR

An HS210HR comes with 2x 3/4” and 1x 3/8” screw couplings.

Working width: 211 cmCutting capacity: up to 3 cmWeight: 269 kgMounting bracket: 80 x 80 mmMaximum revolutions: 2500 rpmRequired connections: Pressure - Return - Drain line (pressure-free)Required oil supply: circa 90 l/min (only available with 16cc motors)Min. - max. oil pressure: 180 - 210 bar



HEDGE CUTTER


7HS240HR

SPECIFICATIES

BEC-HS240HR € 18.400,-Machine features 22cc motors(circa 90 liters/minute continuous volume flow needed)An HS240HR comes with 2x 3/4” and 1x 3/8” screw couplings.




13

Machine features 22cc motors(circa 100 liters/minute continuous volume flow needed)

WINDBREAKER CUTTERWS300HR

SPECIFICATIONS

8

Working width: 300 cmCutting capacity: up to 3.5 cmWeight: 450 kgMounting bracket: 80 x 80 mmMaximum revolutions 2000 rpmRequired connections:Required oil suply:Min. - max. oil pressure: 180 - 210 bar

BEC-WS300HR € 24.100,-

An WS300HR comes with 2x 3/4” and 1x 3/8” screw couplings.

Pressure - Return - Drain line (pressure-free)circa 100 l/min (only available with 22cc engines)


DOUBLE ROTATOR


Height in relation to coupling: 55 cmTilt angle (horizontal/vertical): 180° degreesWeight: 185 kgTool clamp: 80 x 80 mmRequired doublehydraulic functions: 2

Take note: A separate continuous volume flow will be needed to power your cutter/tool.

SPECIFICATIONS

9DRHS55

Basic machine with CW10 mounting plate BEC-DRHS55 € 5,460

Additional cost CW20 mounting plate instead off CW10 BEC-MP010 € 140

Additional cost CW30 mounting plate instead off CW10 BEC-MP011 € 175

A DRHS55 comes without hoses or couplings.


450 kgMaximum tool weight:


HYDRAULIC ARM

SPECIFICATIONSExtension width: 60 cmTilt angle: 105° degreesWeight: 100 kgTool clamp: 80 x 80 mmMaximum tool weight: 170 kgRequired doublehydraulic functions: 2Min. - max. oil pressure: 140 - 250 bar

Take note: A separate continuous volume flow will be needed to power your cutter/tool.

WLA60

10

BEC-WLA60 € 5.870,-

BEC-MP008 € 905,-



Basic machineRequired: 2x double hydraulic functions for operating WLA60

Additional cost for valve used to convert one double function into two

Required: 1x double hydraulic function for operating WLA601x Switchable 12V power source

A WLA60 comes with hoses to the mounting plate and with a flat back plate with 4 bolt holes (see image)

WEED BRUSH

SPECIFICATIONS

Brush diameter: 90 cmWeight: 152 kgRequired continuous volume flow brush: 20 - 60 l/mMin. - max. oil pressure: 180 - 250 bar

11OB90M

Basic machine: BEC-OB90M

BEC-ABD-AVANT

AVA65250

€ 2.950,-

€ 237,-

€ 275,-

Additional cost Avant adapterplate

Additional cost Avant Multiconnector including hoses

Additional cost other extension adapters on request

An OB90m comes with hoses to the brush arm.



WEED BRUSH


OB90

Basic machine BEC-OB90 € 9.580,-

€ 505,-

12

Brush diameter: 90 cmWeight: 200 kgRequired oil supply brush: 20 - 60 l/mRequired doublehydraulic functions: 3Min. - max. oil pressure: 180 - 250 bar

SPECIFICATIONS

Additional cost hydraulic hoses and couplings Karcher MIC50/70

Additional cost hydraulic hoses and couplings 250/270

Additional cost hydraulic hoses and couplings Multihog CX55/75

Additional cost rotating direction valve

BEC-MP026

BEC-MP022

BEC-MP034

BEC-MP031

BEC-MP035

€ 630,-

€ 630,-

€ 630,-

€ 845,-

Additional cost for three-point hitch connection Cat 1-2

An OB90 comes with double pilot operated check valves on the brush head cilinders

An OB90 comes with hoses to the mounting plate.


WEED BRUSH EDGE CUTTEROBKS50-35

13

Basic machine:Required:

- Side shift + blade-holder arm mechanically adjustable- Continuous volume oil flow ( Pressure - Return - Drain line)

BEC-OBKS50-35 € 7.160,-

Additional cost for hydraulically operated working width BEC-MP014 € 695,-

Required: - 1x Double hydraulic function

Additional cost for hydraulic blade height configuration BEC-MP007 € 460,-

Required: - 1x Double hydraulic function

Additional cost for valve block used to convert one double function into two BEC-MP015 € 905,-

Required: - 1x double hydraulic function for operating OBKS50-35- 1x Switchable 12V power source

Additional cost brush head with mechanical adjustment BEC-MP017 € 465,-

An OBKS50-35 comes with a flat back cover with 4 bolt holes (see image)

An OBKS50-35 comes with hoses to the mounting plate.

SPECIFICATIONSBrush diameter: 50 cmBlade diameter: 35 cmWeight: 170 kgRequired oil flow brush: 20 - 60 l/minMin. - max. oil pressure: 180 - 250 bar



picture thus not show theOBKS50-45

14OBKS50-45

SPECIFICATIONS

Basic machine: BEC-OBKS90-45 € NA,-

BEC-MP026

BEC-MP022

BEC-MP034

BEC-MP031

BEC-MP035

€ 505,-

€ 630,-

€ 630,-

€ 630,-

€ 845,-

The OBKS50-45 comes standard with double pilot operated check valves on the brush head cilinders

Brush diameter: 50 cmCutter blade diameter: 45 cmWeight: 210 kgRequired oil flow brush: 20 - 60 l/mRequired double working valvesRequired switchable 12 volt. conectors: 2Min. - max. oliedruk: 180 - 250 bar

(Available end 2020)






WEED BRUSH EDGE CUTTER

3

The validity of this price list is subject to potential printing errors



12

OBKS90-45

Deze prĳslĳst is geldig onder voorbehoud van eventuele drukfouten.

SPECIFICATIES (basismachine)

ONKRUIDBORSTEL KANTENSNĲDER

Basismachine: BEC-OBKS90-45 € 12.900,-

BEC-MP026

BEC-MP022

BEC-MP034

BEC-MP031

BEC-MP035

€ 505,-

€ 630,-

€ 630,-

€ 630,-

€ 845,-

Brusch diameter: 90 cmCutter blade diameter: 45 cmWeight: 260 kg

20 - 60 l/mRequired double working valvesRequired switchable 12 volt. conectors:Min. - max. oliedruk: 180 - 250 bar

15OBKS90-45

SPECIFICATIONS

Basismachine: BEC-OBKS90-45 € 13.290,-

Required oil flow brush:

2






WEED BRUSH EDGE CUTTER

3


Additional cost other extension adapters on request

An OBKS90-45 comes standard with double pilot operated check valves on the brush head cilinders



HEDGE CUTTER (Electric)HS75ER


Basic machine features two 48volt motors BEC-HS75ER € on request

SPECIFICATIES

16


Working width: 77 cmCutting capacity: up to 2.0 cmWeight: 73 kgMounting bracket: 80 x 80 mmMaximum revolutions: 3000 rpmRequired connections: 48volt

18Notes:

Prices are valid from februari 2020 and are subject topotential errors. All previous price lists hereby expire.All prices and versions are non-binding and can bealtered without prior notice.

Prices: excl. taxes, packaging and transportDelivery: At factory Moergestel (NL)Delivery time: to be agreed

Contact via uw dealer:

Becx Machines B.V.De Sonman 355066 GJ [email protected]: +31 (0) 13 207 0760

2020-01-eng. pricelist becx machines...2020-01-eng. pricelist becx machines.pdf created date...

Documents