FKG

Elimination of screwing effectThe exclusive patented design of the blade avoids screwing and allows a better control of instrument’s progression – iRaCe isn’t pulled in the canal - producing a more confortable use

R2

R3

R1

QUICK, EFFECTIVE and SAFE

Optimal cutting efficiency> The triangular section with sharp edges cuts better and faster,

without need of pressureMoreover, as instruments stay short time in the canal, they are less stressed and last longer

> The smaller core grants a higher flexibility and allows a better progression in curved canals

> Space for debris is greater, improving their evacuation without jaming the blade

1

3

2

1 Sharp edges optimum cutting2 Thin core

for increased flexibility 3 More space for debris

Increase of resistance> Elecrto-chemical polishing eliminates the grinding

imperfections reducing drastically the outbreak of weak points (micro-cracks)

> The resulting glossy surface allows a better cleaning & disinfection, improving sterilization process

> Better resistance to corrosion

Rue du Crêt-du-Locle 4CH-2304 La Chaux-de-Fonds

SwitzerlandTel: +41 (0)32 924 22 44 Fax: +41 (0)32 924 22 55

E-mail: info@fkg.ch

www.fkg.ch

For mastering NiTi fatigue> After each use pull off 1 petal for Simples cases, 2 petals for Medium

cases, 3 petals for Difficult cases> Discard the instrument when all petals have been pulled off

FKG REF. - 99.7AA.00.03A.AN - 2011/03 3D Visual

FKG

EXCLUSIVE Clinical cases

For most cases (straight, light curved or large canals) 3 instruments R1 instrument to working length (WL), continue with R2 to WL and finish with R3 to WL.

Case 1Endo treatment of teeth 47 with the iRaCe R1 R2 R3.Curvatures have been fully respected.

Case 2Endo treatment of teeth 16 with 4 well-marked canals.Palatinal canal was shaped with the iRaCe sequence and the other 3 vestibular canals with the help of iRaCe Plus R1a and R1b before the use of R2 and R3.

Case 3Endo treatment of teeth 34 having a strong apical curvature.iRaCe and iRaCe Plus were used for a perfectly maintained curvature.

New shankEasy location of ISO sizes (large ring)

and taper (thin ring : yellow : 2%, red : 4%, blue : 6%)

SafetyMemoDisc (SMD)To control fatigue and number of uses

S for Simple – M for Medium – D for Difficult

Electro-chemical polishingBetter resistance to torsion and cyclic fatigue

Sharp cutting edgesThey cut efficiently = time saving

Alternating cutting edgesNo screwing, no pulling in

Exclusive rounded safety tipFor fine guidance and to bypass obstructions

Courtesy of Dr. Bertrand Khayat (France)

R1 15/.06 R1a 20/.02 R1b 25/.02 R2 25/.04 R3 30/.04

For

mos

t cas

es:

3 in

stru

men

tsR

1 in

stru

men

t to

wor

king

leng

th (W

L),

cont

inue

with

R2

to W

L an

d fin

ish

with

R3

to W

L.

Diffi

cult

case

s (n

arow

ed, c

urve

d ca

nals

): 3+

2 in

stru

men

tsIf

R1

does

n’t r

each

the

WL,

don

’t fo

rce

the

way

. >>

Use

the

iRaC

e P

lus:

R1a

to W

L an

d R

1b to

WL.

Onc

e W

L is

rea

ched

, con

tinue

nor

mal

y w

ith R

2 to

WL

and

R3

to W

L.

R1

1

5/.0

6 R

1a

20

/.02

R

1b

25

/.02

R2

2

5/.0

4 R

3

30/

.04

Plus

Plus

PlusDifficult cases (narowed, calcified canals or with severe curvature) 3+2 instrumentsIf R1 doesn’t reach the WL, don’t force the way. > Use the iRaCe Plus: R1a to WL and R1b to WL.Once WL is reached, continue normaly with R2 to WL and R3 to WL

Golden rulesSpeed: 600 rpmTorque: 1.5 Ncm

> Gentle in-out strokes> 4-5 seconds per instrument> Light handed, let the instrument work

ProtocolQUICK, EFFECTIVE and SAFE