cistem2016cistem2016.uca.ma/programme_complet_cistem 2016.pdf · el mkaddem kheddioui walid labiedh...
TRANSCRIPT
Programme De la 2èmeConférence Internationale en Sciences
Et Technologies Electriques au Maghreb
26 - 28 Octobre, Faculté des Sciences Semlalia,
Marrakech, Maroc
2ème Conférence Internationale en Sciences et
Technologies Electriques au Maghreb
26 - 28 Octobre, Marrakech, Maroc
CISTEM2016
PARTENAIRES ACADEMIQUES
AUTRES PARTENAIRES
CONFÉRENCIERS
M. Mohammed M'SAAD a obtenu son diplôme d’ingénieur de l’Ecole
Mohammadia d'Ingénieurs où il est devenu maître assistant en septembre 1978.
Il a initié ses travaux de recherche au Laboratoire d'Electronique et d'Etude des
Systèmes Automatiques où il a préparé une thèse de l’Université Mohammed V
sur la commande adaptative des procédés industriels. En novembre 1982,
Mohammed M'SAAD rejoint le Laboratoire d'Automatique de Grenoble pour
préparer une thèse d’état-es-sciences physiques de l’Institut National
Polytechnique de Grenoble qu’il a soutenue en avril 1987 sur les aspects fondamentaux de la
commande adaptative et son applicabilité. En avril 1982, il a obtenu un poste de Chargé de
Recherche au Centre National de Recherche Scientifique avec une affectation au Laboratoire
d’Automatique de Grenoble. En septembre 1996, Mohammed M'SAAD a obtenu un poste de
professeur à l’Ecole Nationale Supérieure d'Ingénieurs de Caen où il a fondé un Laboratoire
d’Automatique de Procédés qui est devenue l’équipe d’automatique du GREYC UMR CNRS en janvier
2004. Ses activités de recherche ont été consacrées aux aspects fondamentaux, méthodologiques et
appliqués de l’identification, l’observation et la commande adaptative des systèmes. Il a de
nombreuses importantes responsabilités scientifiques et collectives, notamment la direction du
GREYC UMR CNRS de janvier 2012 à mars 2016.
M. Iyad Dayoub is Professor of Communications Engineering; He has been awarded
BEng (Telecommunications & Electronics) in 1993. He received the M.A.Sc degree in
Electrical Engineering from the National Polytechnic Institute of Lorraine (INPL), and a
PhD in 2001 from the Institute of Electronics, Microelectronics and Nanotechnology
(IEMN), Valenciennes University. He has worked as a system Engineer with Siemens
(Middle East) and as a Researcher with Alcatel Business Systems Alcatel, Colombes
(Paris).His current research activities at the IEMN are focused on Wireless
Communications, High-Speed Communications, Cognitive Radio, and Hybrid Radio- Optic
Technologies. He was (2007-2014) a member of the National Council of Universities (CNU, France) in
the area of Electrical engineering, electronics, photonics and systems, and Adjunct Professor in
Concordia University, Montreal (2010-2014). He is IEEE Senior member, and member of several
International Conference Advisory Committees, Technical Program Committees and Organization
Committees such as VTC, GLOBECOM, ICC, PIMRC, WWC, etc.
M. Bertrand Revol est né le 11 Juin 1976 en France. Il a obtenu son diplôme de
d'ingénieur de l’ENSIEG de l'INPG (Institut National Polytechnique de Grenoble) en Juin
2000. Depuis Novembre 2003, il est titulaire d'un doctorat de génie électrique de
l'Université Joseph Fourier portant sur la compatibilité électromagnétique (CEM) en
électronique de puissance. Depuis Septembre 2004, il est maître de conférences à
l'Ecole normale supérieure Paris-Saclay (ex. ENS Cachan). Ses principaux domaines de recherche
portent sur la modélisation des structures et des composants pour la compatibilité
électromagnétique des convertisseurs électroniques de puissance. Il mène ses recherches au
laboratoire de SATIE UMR 8029 et travaille actuellement sur des questions liées aux interférences
électromagnétiques et à la modélisation pour l'optimisation et l'intégration en électronique de
puissance.
M. Abdesslem Djerdirest né le 05/08/1969 et a reçu le diplôme d’ingénieur en génie
électrique de l'Institut national d’électrotechnique de Bejaïa, Algérie, en 1993 et le
diplôme de doctorat en génie électrique de l'Université de Franche Comté Belfort,
France, en 1999. Il est actuellement maître de conférences à l'Université de
Technologie de Belfort-Montbéliard (UTBM), France. Il est habilité à diriger les
recherches scientifiques depuis Décembre 2007. Ses domaines de recherche
comprennent la modélisation et la conception de systèmes de véhicules électriques et à piles à
combustible (machines électriques, dispositifs de stockage d'énergie, et des convertisseurs de
puissance). Il développe ses principales activités de recherche sur la disponibilité et la haute
efficacité des chaines de traction électriques pour des applications de transport en combinant des
approches expérimentales et théoriques. Dans ce contexte, il a été le référent véhicule du projet
européen Mobypost (http://mobypost-project.eu) où 10 véhicules à combustible ont été construits
et testés. Depuis Décembre 2014, il est directeur du département Énergie de l’UTBM.
M. Omar Elkedim a obtenu son doctorat en science des matériaux à l’Université de
Technologie de Compiègne (France) en 1987 et a soutenu une habilitation à diriger
des recherches à l’Université de Haute Alsace (Mulhouse, France) en 1997. Il a été
nommé maître de conférences à l’Université de Technologie de Belfort-Montbéliard
en 1990. Il effectue ses recherches au département MN2S de l’institut FEMTO-ST. Ses
activités de recherche concernent l’élaboration et la caractérisation des propriétés physico-
chimiques de nanomatériaux obtenus par mécanosynthèse. Récemment, il s’est intéressé à la
caractérisation des propriétés de stockage solide de l’hydrogène au sein de la fédération de
recherche FC-Lab (Fuel Cell-Laboratory). Il est auteur ou co-auteur de 75 publications nationales ou
internationales dans des revues à comité de lecture et il a participé à 120 conférences nationales ou
internationales.
CISTEM 2016 COMMITTEES
HONOR COMMITTEE
MEMBRES INSTITUTIONS
Abdellatif MIRAOUI Président de l'Université Cadi Ayyad
My Hassan HBID Doyen de la Faculté des Sciences Semlalia, Marrakech
Moha TAOURIRTE Doyen de la Faculté des Sciences et Techniques, Marrakech
Driss ABOUTAJDINE (Directeur du Centre National pour la Recherche Scientifique et
Technique)
Badr IKKEN (Directeur de l'Institut de Recherche en Energie Solaire et Energies
Nouvelles)
Azelarab ELHARTI (Président de la FENELEC)
Ahmed SQUALLI (Directeur NRJ)
Obaid AMRANE (Membre du directoire du MASEN)
Said MOULINE (Directeur général de l'ADEREE)
PERMANENT COMMITTEE
Chair:
GABSI Mohamed (FRA)
Members :
BACHA Seddik(FRA)
BELHAJ Jamel (TUN)
BOUBAKEUR Ahmed (DZA)
DOUBABI Said (MAR)
IBTIOUEN Rachid(DZA)
MACHMOUM Mohamed (FRA)
OUNI Kais (TUN)
SAADI Janah (MAR)
ORGANIZING COMMITTEE
Chairs:
ZEROUAL Abdelouhab (MAR)
SAADI Janah (MAR)
Members :
IBNYAICH Saida (MAR)
CHABAA Samira (Mar)
DOUBABI Said (MAR) ABDENOURI Naji (MAR)
SALHI Issam (MAR) ELASSALI Raja (MAR)
BOULGHASOUL Zakaria (MAR)
SOLHY Abderrahim (MAR)
KHALLA Tarek (MAR)
ADDOU Mohamed(MAR) AILAM El Hadj(DZA) ALOUI Helmi(TUN) AMAMI Benaissa(MAR) AZOUI Boubekeur(DZA) BACHA Seddik(FRA) BADRI Abdelmajid(MAR) BELARBI Larbi(MAR) BELKASMI Mourad(MAR) BELHADJ Jamel(TUN) BELHADJ SLAMA Jalel(TUN) BELKHODJA SLAMA Ilhem(TUN) BEN AMMAR Faouzi(TUN) BEN AHMED Hamid(FRA) BENAMROUCHE Nacereddine(DZA) BENHADDOU Driss(USA) BENHADJ BRAIEK Naceur(TUN) BEROUAL Abderrahmane(FRA) BOUBAKEUR Ahmed(DZA) BOUCHERIT Mohamed Seghir(DZA) BOUDOUR Mohamed(DZA) BOUDRAA Bachir(DZA) BOUKHETALA Djamel(DZA) BOUSSAK Mohamed(FRA) ELLEUCH Mohamed(TUN) ESSAAIDI Mohamed(MAR) FELIACHI Mouloud(FRA) FNAIECH Farhat(TUN) GARBI Rached(TUN) GRAYAA Khaled(TUN)
HAJJEJ Joseph (TUN) HAMMOUCH Ahmed (MAR) HLIOUI Sami (FRA) HMINA Nabil (MAR) IBTIOUEN Rachid (DZA) IKKEN Badr (MAR) JAAFAR Amine (FRA) KARIM Mohammed (MAR) KETATA Mohamed (FRA) KOUKAM Abderrafia (FRA) LADACI Samir (DZA) M’SAAD Mohamed (FRA)
M’SIRDI Nacer(FRA)
MACHMOUM Mohamed (FRA)
MEDROMI Hicham (MAR) MEZRHAB Ahmed (MAR)
MIMET Abdelaziz (MAR) MIMOUNI Mohamed Faouzi (TUN) OUNI Kais (TUN) RAHLI Mostefa (DZA) REKIOUA Toufik (DZA) SAAD Abdallah (MAR) SADOUN Rabah (DZA) SALLAMI Anis(TUN) SARI Zaki(DZA) SBITA Lassad(TUN) TILMATINE Amar(DZA) TNANI Slim(FRA) ZAIM Mohamed El Hadi(FRA) ZEJLI Driss(MAR)
STEERING COMMITTEE
TECHNICAL PROGRAM COMMITTEE CHAIR:
Pr. JANAH SAADI
TECHNICAL PROGRAM COMMITTEE CO-CHAIRS:
Pr. ISSAM SALHI
Pr. ZAKARIA BOULGHASOUL
TRACK CHAIRS:
T1: Power Components
A. SANDALI, S. HADJI, F.KOURDA
T2: Power Electronics
D. YOUSFI, M.O. MAHMOUDI, A.LAHYANI
T3: Electromagnetic Compatibility
M. RIFI, R. TAHMI, J. BELHADJSLAMA
T4: Electric Machines &Drives
M. CHERKAOUI, N. BENAMROUCHE, L. ELAMRAOUI
T5: Power Networks
M. MAAROUFI, M. BOUDOUR, M.ELLEUCH
T6: Energy Storage &Management
I. SAADOUNE, B. AZOUI, S. BENMABROUK
T7: Renewable Energies
M. ASBIK, T. REKIOUA, O.HASNAOUI
T8: Embedded Energy Systems
M. ESSAAIDI, S. BACHA, F.MIMOUNI
T9: Automation &Control
A. BENZAOUIA, M.S. BOUCHERIT, F. BENHMIDA
T10: Signal, Image and Video Processing
R.O.H. THAMI, B. BOUDRAA, M.SAYADI
T11: Electronics and IndustrialComputing
A. BADRI, R.SADOUN, K.GRAYAA
T12: Diagnosis andNondestructiveTesting
S. BELATTAR, D. BOUKHETALA, K.JELLASSI
T13: Modeling and NumericalMethods M. OUASSAID, K. BOUGHRARA, S.KASMI
T14: Materials forEnergy A. OUTZOURHIT, A. MEKHALDI, R.GHARBI
SPECIAL SESSION CHAIRS :
Session 1: Champ proche et CEM des systèmes
M. BENSETTI, N. IDIR
Session 2: La magnétocalorie
A. LEBOUC, A. BENYOUSSEF
Session 3: Les supraconducteurs en Génie Electrique
E. AILAM, B. DOUINE
Session 4: La Coordination de l'Isolement
A.AMRANE, A. BOUBAKEUR, H. MOULAI
Session 5: Le diagnostic des isolations de HT utilisant les
méthodes d'intelligence Artificielle.
A. BOUBAKEUR
Session 6: Systèmes de transport intelligents ITS
R. ELASSALI, A.M. REVINQ, F. BOUKOUR
Session 7: Distributed renewable energy
systemsRenewableEnergies
A. HAYAR
Session 8: Energies Marines Renouvelables
M. MACHMOUM
Session 9: Towards 5G systems.
I. DAYOUB, A. HAYAR
Session 10: Matériaux pour le stockage d’énergie
I. SAADOUNE
Session 11: Multiphysics analytical models for the design
of electrical machines
G. BARAKAT, R. IBTIOUEN, Y. AMARA
Faouzi Benzarti Lotfi Salhi Nawres Khlifa Lhoussain Elbahir Moulay TAHAR Lamchich Thierry Lubin Sif-Eddine Eddine ABDI Khalid Elbaamrani Noureddine Idboufker Samira Chabaa Saida Ibnyaich Ahmed Aamouche Elhoucein Aassif Abdeslem Beldjilali Toufik Ainouche Said Aissou Nadia Ait-Ahmed Rezak Alkama Mehdi Allagui Anis Ammous Abderrahmane Amrouche Atika Menhaj Maha Bellaaj Ines Ben Fredj Khadija Ben Kilani Nizar Ben Salah Mohamed Aziz Ben Youssef Rabah Benabid Abdoulaziz Benbraim Mohamed Benchagra Mohamed Benhayoun Salaheddine Benkaddour Abderrahim Bennassar Paul Nicolae Borza Mabrouk Bouabdallah Hamid Bouassam Fares Boudjema Ghouti Boukli Salvy Bourguet Stephane Caux Nadia Chaker Aloui Ikbal Chammakhi Antony Dasco Mohamed Dhib Ziane Djamel Frédéric Dubas Fabrice Duval Youssef El Afou Abdelhakim El Ouadih Laila El Younsi Afef Elloumi Oueslati Moufida Gharbi Larbi Hadjout Mohamed Hanaoui
Ammor Hassan Fateh Hellal Fadil Hicham Ahmed Ihlal Manel Jebali Ben Ghorbal Nafaa Jeddi Imen Jemâa Moncef Kadi Asma Karama Malika Kedir Marwen Kermani Chokri Khaldi El Mkaddem Kheddioui Walid Labiedh Mohammed Amine Lahlou Fergani Lamia Pierre-Etienne Levy Said Mazer Driss Mehdi Laraki Mehdi Said Mekhtoub Thouraya Meksen Abdelouahed Mesbahi Fouad Mesquine Fakir Mohamed Hilal Mohamed Rezaoui Mohamed Mounir Zaibi Mohamed-Ali Mohamed Mohammedi Luc Moreau Hemis Mustapha Wissem Naouar Karim Nassim Bouchhida Ouahid Seddik Ouallam Andres Ovalle Lionel Pichon Ben Mehrez Rached Djamila Rekioua Bennani Dosse Saad Saif Saadaoui Safi Said Nadia Saidi Amroun Belkhir Salah Bouhouche Salah Houcine Salhi Emmanuel Schaeffer Horst Schulte Benjamin Sendama Kaoutar Senhaji Fernando Tadeo Abdelouahed Tajer Kenza Telbissi Omar Touhami Ouazir Youcef
TECHNICAL PROGRAM COMMITTEE
Aite Driss Youness Errami Youssef Abderahmane Ziani Zakaria Boulghasoul Issam Salhi Janah Saadi Helmi Aloui Yacine Amara Mohamed Asbik Moez Ayadi Boubekeur Azoui Faouzi Bacha Seddik Bacha Abdelmajid Badri Habiba Bali Georges Barakat Mohamed Ali Belaid Sougrati Belattar Hafedh Belmabrouk Nidhal Ben Amor Haithem Ben Chikha Asma Ben Rhouma Tarek Ben Salah Ines Ben Salem Mohamed Benbouzid Abdelber Bendaoud Farid Benhamida Khalid Benjelloun Afef Bennani-Ben Abdelghani Hamada Bennassar Mohamed Bensetti Abdellah Benzaouia Farah Bouakrif Slimane Bouazabia Ahmed Boubakeur Bachir Boudraa Kamel Boughrara Mounir Bouhedda Larbi Boukezzi Manef Bourogaoui Monia Bouzid Mohammed Chadli Nadia Chaker Abdellah Chaouch Mohamed Cherkaoui Ahmed Dhouib Bruno Douine Adil Echchelh Rafika El Harabi Ahmed Essadki Aymen Flah Mohamed Gabsi Zine Ghemari Fatima Zohra Gherbi Frédéric Gillon Abderrezak Guessoum Boukthir Haddar Seddik Hadji
Ahmed Hammouch Messaoud Hamouda Nejib Hamrouni Mohamed Naguib Harmas Sami Hlioui Nadir Idir Ben Ali Jaouher Khaled Jelassi Mohammed Karim Khalil Kassmi Abdelkrim Khireddine Mohamed Arbi Khlifi Abderrafiaa Koukam Samir Ladaci Abdelaziz Lakehal Mohamed Najeh Lakhoua Jean-Philippe Lecointe Malik Loudini François Louf Mohamed Machmoum Elyes Maherzi Djillali Mahi Slimane Mekaoui Abdelouahab Mekhaldi Hocine Moulai Faouzi M'Sahli Tamou Nasser Rachid Oulad Haj Thami Mostefa Rahli Bertrand Revol Abdallah Saad Ismael Saadoune Rabah Sadoun Lotfi Saidi Abdelhalim Sandali Karim Sebaa Tahar Seghier Smail Semaoui Mohammed El Amine Slama Ilhem Slama-Belkhodja Mohamed Aymen Slim Youcef Soufi Souad Tahraoui Nabil Taib Abdelaziz Talha Hocine Teffahi Madjid Teguar Amar Tilmatine Mohamed Tlig Abdelmounaïm Tounzi Driss Yousfi Boubakeur Zegnini Karim Zehani Driss Zejli Rabie Zine
El Hadj Ailam Nacereddine Benamrouche Rachid El Bachtiri Abdelhadi Elbacha Elmostafa Elwarraki Khaled Louati Karim Medles Arwa Nasr Toufik Rekioua Mohamed Zellagui Adel Khedher Hacene Benkhoula Férid Kourda Mohand Oulhadj Mahmoudi Redouane Tahmi Mohamed Boudour Mohamed Seghir Boucherit Djamel Boukhetala Mounir Rifi Mohamed Maaroufi Mohamed Essaaidi Mohamed Ouassaid Abdelkader Outzourhit Amin Lahyani Lilia El Amraoui Mohamed Elleuch Salah Ben Mabrouk Othman Hasnaoui Mohamed Faouzi Mimouni Rached Gharbi Mohamed Addou Benaissa Amami Larbi Belarbi Mourad Belkasmi Nabil Hmina Badr Ikken Hicham Medromi Ahmed Mezrhab Abdelaziz Mimet Rachid Ibtiouen Zaki Sari Jamel Belhadj Farhat Fnaiech Kais Ouni Jalel Belhadj Slama Khaled Grayaa Sbita Lassad Faouzi Ben Ammar Naceur Benhadj Braiek Abderrahmane Beroual Mouloud Feliachi Amine Jaafar Slim Tnani Mohamed El Hadi Zaim Aawatif Hayar Raja Elassali Driss Benhaddou Mohamed M’saad
Nacer M’sirdi Afef Lebouc Atika Revinq Fouzia Elbahhar Boukour Abdelouahab Zeroual Said Doubabi Said Belkouch Abderrahim Brakez Abdenouri Naji Abderrahim Solhy Anis Sallami Mouhcine Chami Amrane Ayadi Iyad Dayoub Hamid Benahmed Fayçal Ben Hmida Mounir Sayadi Mohamed Nadjib Benallal Abdechafik Hadjadj Abdelghani Choucha Joseph Haggège Soufiane Kasmi Abdellah Bah Omar Ansari Mohamed Boussak Wajdi Saadaoui Sejir Khoujet El Khil Ahmed Braham Houda Ben Attia Abdelkader Larabi Houcine Zeroug Linda Barazane Abdelkader Djahbar Farid Bouchafa Abdelhafid Moualdia Hachemi Chekireb Hemici Boualem Berkouk El Madjid Kouzou Abdellah Zebbadji Tahar Boudana Djamel Benzineb Omar Xavier Roboam Ben Azza Hechmi Chaker Zaghdoudi Choukri Messaoudi Ameur El Amrani Ahmed El Abbassi Mohamed El Amraoui Mustapha Zaouia Jean Philip Urban Djaffar Ouldabdessallem Salah Haddad Nabil Benyahia Hamid Benterzi Mourad Haddadi Cherif Larbes Mohammed Benbrahim
Programme détaillé Provisoire de la conférence CISTEM 2016
Mardi 25 Octobre, 2016
15:30 - 18:30 Ouverture des Inscriptions
Mercredi 26 October, 2016
08:00 - 09:00 Bienvenue et Inscriptions
09:00 - 09:30
Cérémonie officielle d’ouverture de CISTEM’16
Chair : Pr. Abdellatif MIRAOUI, Président de l'Université Cadi Ayyad
09:30 - 10:15
Conférence Plénière 1: Prof. Mohammed M’SAAD
l’Ecole Nationale Supérieure d'Ingénieurs de Caen A High Gain Adaptive Observer Design An Overview
Chairman: Prof. Janah SAADI
10:15 Pause Café
10:45 - 11:30
Conférence Plénière 2: Prof. IYAD DAYOUB
Université de Valenciennes Towards 5G Wireless Communications Based Cognitive Radio: Challenges for Future
Intelligent Transportation (ITS)
Chairman: Prof. Mohamed GABSI
11:30 – 13:00 Session OraleT1 : Power Components Salle 1
Présidents de session: Abdelhalim SANDALI, Sedik HADJI, Ferid KOURDA.
CO1. ID68: Sebbane Yasmina, Dielectric characterization of the PCB
CO2. ID222: Mohamed Mejdal, Abdelmoula Abouhilal, El Hadi Chahid and Abdessamad Malaoui, Study of the economical feasibility and the perfomence of Thermoelectric devices under different conditions
CO3. ID268: Fadwa Haraka, Ahmad El Ouatouati and Mourad Taha Janan, Analytical thermal resistance model for cooling high power IGBTs modules used in the arm solar converter
CO4. ID204: Indrajeet Prasad, Paul Nicolae Borza, Victor Isaac Herrera and Aitor Milo, Energy Management of Hybrid Energy Storage System for e-bike application
11:30 – 13:00 Session Orale T3 : Electromagnetic Compatibility Salle 2
Présidents de session: Mounir RIFI, Redouane TAHMI, Jalel BELHADJ SLAMA
CO5. ID29: Chettibi Walid and Moulai Hocine, Electromagnetic Field Radiated by a Cross Form Grounded Electrode
CO6. ID95: Alaoui Abdallaoui Ismail, Descamps Philippe and Kabbaj Hassane, Multi-TransmissionLines (MTL) loaded by non lineaire lumped elements on 2.5D: Approach FDTD
CO7. ID123: Nassima Elbilok, Abdelber Bendaoud, Nawel Chikhi, Abdelkader Dahak, Houcine Miloudi and Helima Slimani, Mesure et Simulation des Perturbations Rayonnées dans une Inductance Torique
CO8. ID185: Djamila Ziani, Sidi Mohammed Meriah and Lotfi Merad, UWB MIMO Array Design for Medical Applications
11:30 – 13:00 Session Invitée S6: Systèmes de Transport Intélligents Salle 3
Présidents de session: Fouzia BOUKOUR, Sylvie Baranowski, Raja ELASSALI
CI1. ID156: Mohammed Aftatah, Abdelkabir Lahrech and Abdelouahed Abounada, GPS and Odometer Aided Inertial Sensors for Continuous Land Vehicle Navigation in Urban Environments
CI2. ID171: Elbahhar Fouzia, Elabboubi Adil, Heddebaut Marc and Elhillali Yassin, An energy efficiency modulation comparative study in AWGN channel with path-loss
CI3. ID231: Hiba Mouachi, Rajae Elassali, Nourdine Idboufker and Khalid Baamerani, Energy efficiency and end-to-end delay in Wireless sensor Networks MAC Layer for Urban traffic Monitoring
CI4. ID373: Lamyae Maatougui, An Autonomous IR-UWB Receiver Applied for Intelligent Transportation System
CI5. ID374: Laïd Sadoudi, Michaël Bocquet, Emmanuel Moulin and Jamal Assaad, ZigBee-based senor network. Application to health monitoring of rails using ambient noise correlation.
CI6. ID375: Sara Iben Jellal and Sylvie Baranowski, Communication Sans Fil des Wagons à 2.4 GHz
13:00 Déjeuner
14:30-16:30 SessionOrale T7 : Renewable Energies Salle 1
Présidents de session: Driss Zejli, BELHADJ Jamel, Toufik REKIOUA
CO9. ID88: Nouha Gazbour, Guillaume Razongles, Carole Charbuillet and Christian Schaeffer, Environmental performance of renewable energy technonologies: Benefits of current photovoltaic progress on its environmental footprint
CO10. ID160: Souad Lakjiri, Mohammed Ouassaid and Mohammed Cherkaoui, Enhancement of the Energy Efficiency in Moroccan Public Hospitals Through Solar Polygeneration System
CO11. ID184: Achour El Hamdaouy, Issam Salhi, Abdellatif Belattar and Said Doubabi, Takagi-Sugeno Fuzzy modeling for three-phase micro hydropower plant prototype with a new load-frequency regulation structure
CO12. ID188: Dhaker Abbes, André Martinez, Gérard Champenois and Tarik Bouragba, Design and optimization of a standalone photovoltaic system considering panel position, battery lifespan, and cost
CO13. ID201: Youssef Krim, Dhaker Abbes, Saber Krim and Mohamed Faouzi Mimouni, Non-linear Control of a Wind Energy Conversion System Based on a Permanent Magnet Synchronous Generator
CO14. ID227: Echiekh Asma, Chaker Nadia and Aloui Helmi, Hybrid Incremental Conductance MPPT with a Fuzzy Duty Cycle’s Tuning
CO15. ID289: Mustapha Melhaoui, Kamal Hirech, Ilias Atmane, Khalil Kassmi and Rachid Malek, Photovoltaic System monitoring
14:30 -16:30 Session Orale T7 : Renewable Energies Salle 2
Présidents de session: Mohamed ASBIK, Hamid BEN AHMED, Othman HASNAOUI
CO16. ID321: Abdellah Ziouh and Ahmed Abbou, Comparative Study of Fuzzy Logic, Ripple Correlation Control and Pilot Cell Methods for Maximum Power Point Tracking
CO17. ID323: Mohammed Taoussi, Mohammed Karim, Badre Bossoufi, Dalila Hammoumi, Ahmed Lagrioui, Aziz Derouich and Najib Elouanjli, Development, modeling and control of a wind turbine based on DFIG-generator system with variable speed wind
CO18. ID324: Radouan Ajdid, Mohammed Ouassaid and Mohamed Maaroufi, The performances of PV technologies in solar tracking system under Moroccan climatic conditions
CO19. ID341: Wahib Khiari, Mehdi Turki and Jamel Belhadj, Prototype expérimental d’un système de dessalement par osmose inverse alimenté par une source renouvelable intermittente sans stockage électrochimique «Conception et caractérisation pour la gestion Energie-Eau»
CO20. ID352: Tarek Aounallah, Nawel Ferhat, Farid Bouchafaa, Abdelaziz Hamzaoui and Najib Essounbouli, The Influence of Electrical Parameters of Doubly-Fed Induction Generators on An Adaptive Backstepping Controller
CO21. ID353: Ferhat Nawel, Tarek Aounallah, Farid Bouchafaa and Najib Essounbouli, Second Order Sliding Mode Control of a Permanent Magnet Synchronous Generator
CO22. ID381: Ahmed Zoukit, Hicham El Ferouali, Issam Salhi, Doubabi Said, Toufiq El Kilali and Naji Abdenouri, Control System in a Hybrid Solar Dryer Using a Solar-Gas Collector
14:30 -16:30 Session Invitée S11: Multiphysics analytical models for the design of electrical machines Salle 3
Présidents de session: Georges Barakat, Rachid Ibtiouen, Yacine Amara
CI7. ID158: Djelloul Khedda Zakarya, Boughrara Kamel, Ibtiouen Rachid and Dubas
Frédéric, NonLinear Analytical Calculation of Magnetic Field and Torque of Switched
Reluctance Machines
CI8. ID193: Brahim Ladghem Chicouche, Kamel Boughrara, Rachid Ibtiouen and Said
Mekhtoub, Impact of Magnetic Slot Wedges on Characteristics of Permanent Magnet
Synchronous Machine Using Analytical Method
CI9. ID284: Mohammed Ali Benhamida, Hamza Ennassiri, Nabih Debbah, Yacine Amara
and Georges Barakat, Interpolation coupling for reluctance network models
dedicated to the predesign of Switching Flux Permanent Magnet machines
CI10. ID294: Slimane Tahi and Rachid Ibtiouen, Influence of Asymmetric Rotor Barriers
Arrangement on the Torque of Brushless Doubly-Fed Reluctance Machine
CI11. ID344: Abdourahman Aden Diriye, Yacine Amara and Georges Barakat, Eddy Current
Loss Estimation in Permanents Magnets of a Radial Flux Machine using a Hybrid
Analytical Model
CI12. ID349: Nabih Debbah, Mohammed Ali Benhamida, Hamza Ennassiri, Yacine Amara,
Georges Barakat and Rachid Ibtiouen, Modélisation d’une Machine Synchrone à
Double Excitation Série par un Circuit de Réluctances Maillé. Utilisation des fonctions
d’interpolation pour le couplage stator rotor
16:30 Pause Café
17:00 – 17:30 Session Poster1: Electrical System and Power (CP1…35) Président de session: Prof. Zakaria BOULGHASOUL
CP1. ID7 : Abderrahmane Hamiod, Karim Sebaa, Noureddine Henini, A Hellal and A. Bessalah, Etude de la Reconfiguration des Réseaux Electriques de Distribution
CP2. ID118: Zaineb Kanzari, Jalel Khediri, Wajdi Zaafrane and Mohamed Jemli, Comparison of Two Regulators for Phtovoltaic Systems: The PID Regulator and Sliding Mode Control
CP3. ID23: Samir Abdelmalek, Linda Barazane and Abdelkader Larabi, Developping of a Multiple models for a Doubly-Fed Induction Generator
CP4. ID25: Khelifi Otmane Khelifa, Nezli Lazhari and Bali Noureddine, Robustfied GPC speed controller for Induction Motors
CP5. ID28: Abdelkader Yousfi, Tayeb Allaoui and Abdelkader Chaker, An Advanced Control Approach for Five-level Shunt Selective Active Filter Connected to a Photovoltaic Source
CP6. ID42: Ines Bourguiba and Ferid Kourda, Gate Driver Circuit for IGBT Using Reduced Number of High Frequency Transformers
CP7. ID45: Ismail Bouyakoub, Benyounes Mazari, Rachid Taleb and Omar Maarouf, A 3D-SVM Control of Shunt active filter Configuration Cascading Two Two-Level Inverters
CP8. ID49: Ghania Aggoun, Djaffar Ould Abdeslam and Rachid Mansouri, ADALINE Approach for Parameter Identification and State-of-Charge Estimation of Lithium Ion Batteries
CP9. ID51: Ameni Dridi, Rania Linda Filali and Mohamed Benrejeb, Synchronization of discrete-time hyperchaotic multimodels based on aggregation technique for encryption
CP10. ID57 : Senguel Wayang, Mohaman Gonza, Ngasop Ndjiya, Ousman Boukar and Laurent Bitjoka, Synthèse de la commande supervisée d’un système modélisé à base du Grafcet à partir de son Graphe de Marquage
CP11. ID70: Messaoud Zobeidi, Fatiha Lakdja and F.Z Gherbi, Improvement Power System Security by Optimal Placement of TCSC
CP12. ID76: Naoual Mijlad, Elmostafa Elwarraki and Abdelhadi Elbacha, A behavioral model of power MOSFETdevice compatible with SIMULINK
CP13. ID94: Henda Jabberi and Faouzi Ben Ammar, Investigation on different pulsing generators technologies for shale fracturing
CP14. ID107: Wissal Bey, Walid Hamdi and Naceur Benhadj Braiek, Stabilization of constrained uncertain systems by an interpolation-based off-line approach
CP15. ID111: Amine Mehdi Fihakhir and Mohamed Bouhamida, Nonlinear Control of a Doubly Fed Induction Generator Driven Wind Turbine
CP16. ID119: Amina Achalhi, Mohammed Bezza and Noureddine Belbounaguia, Speed Sensorless DTC of Induction Machine using Luenberger Observer
CP17. ID146 : Daniel Roger, Vadim Iosif and Stephane Duchesne, Modélisation de l’effet de peau dans les fils nickelés utilises en haute température
CP18. ID155 : Moulay Fatima and Habbatti Assia, Performances d’un Compensateur Statique de Puissance Réactive de type Avancé(CSERA).
CP19. ID157: Aymen Ammouri, Analysis and Optimization of Planar Transformer for Power Converters Application
CP20. ID159: Chibani Abdelilah, Daaou Bachir, Gouichiche Abdelmadjid, Safa Ahmed and Messlem Youcef, Super twisting sliding mode controller for chua’s chaotic system
CP21. ID165: Mahdi Atig, Mustapha Bouheraoua, Rabah Khaldi and Nacereddine Benamrouche: An Experimental Investigation of Heating In The End Windings of an Induction Motor Under Open Phase Fault
CP22. ID167: Zine El Abidine Kherroubi, Mostefa Kermadi and El Madjid Berkouk, Real Time Implementation of Three Level Space Vector Pulse Width Modulation using Arduino DUE board
CP23. ID192: Abdennabi Khiam, Nabil Ngote and Mohammed Ouassaid, On the Use of the Combined Time Synchronous Averaging - Fuzzy Logic Analysis to Detect Induction Motor Faults
CP24. ID212: Nazha Cherkaoui, Aziz Belfqih, Faissal El Mariami, Jamal Boukherouaa, Mohamed Nouh Dazahra and Meriem Majdoubi, Contribution of wind farms at voltage regulation in the power system
CP25. ID223: Demim Fethi, Nemra Abdelkrim and Louadj Kahina, Solution of an optimal control problem of the robot with Bellman Principle’s
CP26. ID232: Fouad Berrabah, Zine Ghemari and Saad Salah, Torque Control and Sliding Mode Control of Sensorless Induction Machine
CP27. ID239: Oukennou Aziz and Sandali Abdelhalim, Voltage Stability Index Analysis and Comparison Derived from an Optimal Power Flow
CP28. ID264: Oussema Gharouat, Djihad Matouk, Abdessemed Fodil and Hassam Abd Elouahab, Combined Backstepping and Enhanced PD Control Design for Position and Attitude stabilization of an UAV Quadrotor
CP29. ID266: Saïda Ben Slimen, Manef Bourogaoui and Houda Ben Attia Sethom, Abrupt Current Sensor Faults Signatures in a Salient PMSM Drive Using The Multiresolution Analysis Technique
CP30. ID267: Abderezzak Rahab, Fawzi Senani and Hocine Benalla, Direct Power Control of Two-level Back-to-back Converter in Brushless Doubly Fed Induction Generators Based Wind Turbine
CP31. ID273: Bruno Francois, Aziz Barkaoui and Kamel Ben Saad, Sliding Mode Control of a four brushless Motor robot with independent wheels
CP32. ID279: Hannachi Marwa, Ben Cheikh Ahmed Ikbel and Soudani Dhaou, Discretization of multivariable fully actuated linear system controlled with Internal Model Control
CP33. ID298: Mokhtar Labiod, Nabil Ikhlef and Ilhem Boutana, 2d fluid dynamic simulation of RF inductively coupled non thermal equilibrium plasmas
CP34. ID363: Rabia Guedouani, Bachir Fiala and Mohamed Boucherit, Simulation and Control of Grid Connected PV System Using Five-level Current Source Inverter
CP35. ID364: Abderrezak Aibeche, Madjid Kidouche, Hamza Akroum and Said Grouni, Symmetrical Component and Park’s Vectors Approach for Detection and Identification of Current Sensors Faults in PMSM Drives
17:30 - 19:00 Table Ronde: Bilan de l’édition CISTEM 2016 et préparation de l’édition 2018
Modérateur: Prof. Mohamed GABSI PANEL:
Jamel BELHADJ (ENSIT), Hamid BENHMED (ENS), Ahmed BOUBAKEUR (ENP), Rachid IBTIOUEN (ENP), Mohamed MACHMOUM, Kais OUNI (ENI
carthage), Janah SAADI (UM6P), Abdelouhab ZEROUAL (UCA).
Jeudi 27 Octobre, 2016
08:30 – 09h30
Conférencier Invité 3: Prof. Bertrand REVOL
l'Ecole Normale Supérieure Paris-Saclay Intégration en électronique de puissance: les nouveaux défis scientifiques et technologiques
Chairman: Prof. JamelBELHADJ
09:30 – 11:00 Session Orale T11 : Electronics and Industrial Computing Salle 1
Présidents de session: Abdelmajid BADRI, Helmi ALOUI, Rabah SADOUN, Khaled GRAYAA
CO23. ID80: Ihssen Jabri, Adel Bouallegue and Fathi Ghodhbane, Global Optimization of Wireless Charger Perfermance for Electric Vehicle referring to Metaheuristic Methods
CO24. ID230: Zine Ghemari, Fouad Berrabah and Salah Saad, Development and Experimental Validation of New Model of Relative Movement Modulus of Piezoresistive Accelerometer
CO25. ID283: Rihab Fadhel Khalifa and Khaled Jelassi, An Energy and Power Quality Monitoring System of a Power Distribution
CO26. ID318: Khaoula Ait Belaid, Hassan Belahrach and Hassan Ayad, The Investigation And Simulation Of The Noise Sources Associated With The Simultaneous Switching In Fast Integrated Circuits
09:30 – 11:00 Session Orale T5 : Power Networks Salle 2
Présidents de session: Mohamed MAAROUFI, Mohamed BOUDOUR, Mohamed ELLEUCH
CO27. ID33: Benamrane Alik, Madjid Teguar and Abdelouahab Mekhaldi, Optimum Grounding Grid Design for Future HV Substation of Bir-Khadem using ACO Technique
CO28. ID85: Elkhorchani Habib and Grayaa Khaled, Novel Approach to Reduce CO2 Emission in Smart Micro Grid
CO29. ID190: Zahra Jlassi, Khadija Ben Kilani, Mohamed Elleuch and Lamine Mili, Koopman Mode Analysis of Power Systems Oscillations
CO30. ID191: Ikram Nacef, Khadija Ben-Kilani and Mohamed Elleuch, Impact of Wind Turbine Generators on low frequency oscillations in power systems
CO31. ID234: Azizou Fethi and Boudour Mohamed, Unit commitment using dynamic programmig for planing optimization and emission reduction
CO32. ID257: Abderrahim Amar Mancour and Tamou Nasser, Impact of distributed generation on electrical distribution system
CO33. ID362: Meriem Majdoub, Bouchra Cheddadi, Abdelaziz Belfqih, Omar Sabri, Jamal Boukherouaa, Faissal El Mariami and Nazha Cherkaoui, Study of State Estimation Using Weighted-Least-Squares Method (WLS)
09:30 – 11:00 Session Orale T14 on : Materials for Energy Salle 3
Présidents de session: Abdelkader OUTZOURHIT, Abdelouahab MEKHALDI, Rached GHARBI
CO34. ID32, Larbi Boukezzi, Sébastien Rondot, Omar Jbara and Ahmed Boubakeur, Charging Kinetics of XLPE Insulation Cables Under e-beam Irradiation in SEM: Effect of Thermal Aging
CO35. ID53, Nassour Kamel, Brahami Mostefa, Nemmich Said, Hammadi Nacera, Tilmatine
Amar and Zouzou Noureddine, Developpement d’un nouveau générateur d’ozone à décharge à barrière diélectrique. Application pour le traitement de l’eau
CO36. ID61, Youssouf Brahami, Amar Tilmatine, Adel Benabboun and Said Nemmich, Facteurs Influençant la Mesure de charge d’un nouveau dispositif de séparation tribo électrostatique de particules micronisées à électrodes horizontales en mouvement « va-et-vient »
CO37. ID214, Litim Sid Ali, Hamel Mohammed and Hamidou Mohammed Kamel, Design and blade number optimisation of a mixed flow turbine
CO38. ID347, Chahid El Hadi, Mohammed Idali Oumhaned, Mohammed Erritali, Abdessamad Malaoui, Mohamed Mejdal and M'Barek Feddaoui, Effect of the temperature and physical parameters on the performance of GaAs solar cell.
CO39. ID365, Oualid Messal, Afef Kedous-Lebouc and Andre Youmssi, Interactions Mécaniques-Magnétiques des Aciers Électriques. Application au Poinçonnage des Circuits de Machines Haute Vitesse
09:30 – 11:00 Session Invitée on S1 : Champ proche et CEM des Systèmes Salle 4
Présidents de session: Mohamed Bensetti, Nadir IDIR
CI13. ID117: Benazza Baghdadi, Bendaoud Abdeber, Slimani Halima, Reineix Alain and Dafif
Omar, Etude Expérimentale des perturbations Electromagnétiques Générées par des
Variateurs de Vitesse à Liaisons Directes
CI14. ID121: Meriem Boumenad, Abdelber Bendaoud and Nawel Chikhi, Application of
Response Surface Methodology for Improving EMC Measurements of the Near Field
CI15. ID161: Jean-Luc Kotny, Thierry Duquesne and Nadir Idir, Influence of the ground
plane impedance on the design of the common mode filter
CI16. ID237: Mohamed Toure, Conducted EMI prediction using different levels of MOSFET
models in a multi-physics optimizations context
CI17. ID287: Fethi Benyoubi, Mohamed Bensetti, Yann Le Bihan, Lionel Pichon and
Mouloud Feliachi, Mise En Place D’outils Pour La Réalisation D’étude Cem En Champ
Proche
11:00 Pause Café
11:30 – 13:00 Session Orale T2: Power Electronics Salle 1
Présidents de session: Driss YOUSFI, Mohand Oulhadj MAHMOUDI, Amin LAHYANI
CO40. ID36: Henda Bouyahi, Khaled Ben Smida and Adel Khedher, Acoustic noise reduction techniques for asynchronous machine fed by multilevel static converters
CO41. ID38: Kais Seddiki, Hamed Belloumi and Ferid Kourda, Arc Welding Power Supply Based on Self-oscillating half bridge series resonant converter
CO42. ID69: Ayoub Nouaiti, Abdelouahed Mesbahi, Abdallah Saad and Mohamed Khafallah, Implementation of a low cost single phase five-level inverter for PV system application
CO43. ID82: Mansouri Abdelhamid, Fateh Krim and Laib Abdelbasset, Implementation and design of Fuzzy controller for high performance buck-boost and flyback converters
CO44. ID101: Lamine Makhloufi, Samira Chouiref, Seddik Hadji, Omar Touhami and Said Mekhtoub, Application de la stratégie VOHEPWM a un système onduleur connecté
au réseau
CO45. ID108: Abdelouahed Mesbahi, Abdallah Saad, Mohamed Khafallah, Ayoub Nouaiti, Omar Bouattane and Lhousine Bahatti, Voltage Source Inverter improvement of Photovoltaic Energy conversion system for pumping applications
11:30 – 13:00
Session Orale T2: Power Electronics Salle 2
Présidents de session: Jamal ASSAAD, Faouzi Benammar
CO46. ID199: Arafet Ben Ammar and Faouzi Ben Ammar, Finite Element Analysis Of a Delta-Connected Autotransformer With 40° Phase Shifting
CO47. ID243: Hicham Fadil, Driss Yousfi, Mohamed Larbi Elhafyani, Youness Aite Driss and Abd Rahim Nasrudin, Four-Switch Three-Phase PMSM Converter with Output Voltage Balance and DC-Link Voltage Offset Suppression
CO48. ID260: Nadhir Mesbahi, Ahmed Ouari, Amar Omeiri and Hocine Bouchikha, Predictive Current Controlled Shunt Active Power Filter Working under Unbalanced Supply Conditions
CO49. ID274: Mohamed Ayari, Mohamed Moez Belhaouane, Xavier Guillaud and Naceur Benhadj Braiek, Multivariable Optimal PID control design for Modular Multilevel Converter
CO50. ID282: Bechir Bouaziz, Mahmoud Mahmoud Ben Nasser, Faouzi Bacha and Moncef Gasmi, Design and Implementation of a Direct Power Control Based on Virtual-Flux and Switching Lookup Table
CO51. ID354, Afef Bennani Ben Abdelghani, Ghada Mzid and Ilhem Slama-Belkhodja, Modular Multilevel Converter (MMC): Reconstruction of flying capacitor voltages
11:30 – 13:00 Session Invitée S2: Magnétocalorie et applications à la refrigeration Salle 3
Présidents de session: Afef Kedous-Lebouc et Abdelilah Benyoussef
CI18. ID383 : Osmann Sari, Magnétocalorie pour la réfrigération magnétique autour de la
température ambiante
CI19. ID384 : Omar Mounkachi, Entropie magnétique dans les hétéro-structures (Gd1-
xTbx)
CI20. ID385 :Wissem Cheikhrouhou-Koubaa, Effect of elaborating technique on the
magnetocaloric properties of La0.7Ca0.3-xBaxMnO3 ceramics
CI21. ID386 : Morgan Almanza, Cycles thermiques dans la réfrigération magnétique
11:30 – 13:00 Session Invitée S3 : Les supraconducteurs en Génie électrique
Salle 4
Présidents de session: El Hadj Ailam, Bruno Douine
CI22. ID198: Bruno Douine, Kevin Berger, Jean Leveque, Guanbin Huang, El Hadj Ailam and
Mohamed Elbaa, Evolution de l’Environnement Cryogénique des Systèmes
Supraconducteurs
CI23. ID228: El Hadj Ailam, Mohamed Elbaa, Salaheddine Bentridi, Bruno Douine, Kevin
Berger and Jean Leveque, Résolution de l’équation de Laplace par la méthode de
Monte Carlo : application à une bobine supraconductrice
CI24. ID306, Mohamed Elbaa, Salaheddine Bentridi, El Hadj Ailam, Bruno Douine, Kevin
Berger and Jean Leveque, Calcul analytique de l’inductance d’une bobine dans un
circuit ferromagnétique avec une pastille supraconductrice
CI25. ID307: Abderrezak Rezzoug, Thierry Lubin and Smail Mezani, Supraconducteurs et
machines électriques
13:00 Déjeuner
14:30 – 16:30 Session Orale T10: Signal, Image and Video Processing Salle 1
Présidents de session: ABdelouhab ZEROUAL, Bachir BOUDRAA, Mounir SAYADI
CO52. ID173: Ahcene Abed, Aissa Amrouche, Delmadji Abdelkader, Khadidja Nesrine Boubakeur and Ghania Droua-Hamdani, Segmentation Automatique des Signaux Sonores par HMM et RNA pour la langue Arabe
CO53. ID174: Mahi Sarra and Bouacha Abdelhafid, Performances study of QC-LDPC-coded modulation for WiMAX physical layer
CO54. ID238: Afef Zakhama, Lotfi Charaabi and Khaled Jelassi, HSV color identification in flexible manufacturing
CO55. ID262: Noureddine Ait Ali, Bouchaib Cherradi, Ahmed El Abbassi, Omar Bouattane and Mohamed Youssfi, Fuzzy Spatial Clustering Algorithm on GPU: Caracterisation and Behavior Modeling
CO56. ID277: Messaoudi Abdelhamid, Srairi Kamel and Djamel Eddine Touil, A Novel Algorithm For Wavelet Compression Ecg Signals Using Double Dead Zone Quantizer
CO57. ID345: Youssef Zouhir, Hichem Zekri and Kaïs Ouni, Spectrogram reconstruction based on oracle mask for automatic speech recognition with missing data
CO58. ID379: Benotmane Benamara Noureddine, Elahmar Sidahmed and Dayoub Iyad, Novel Method for Channel Shortening in UWB System
CO59. ID380: Masmoudi Ramadhan, Djebbar Ahmed Bouzidi and Taleb-Ahmed Abdelmalik, Joint Semi-Blind Estimation of CFO and Channel for OFDM Systems
14:30 – 16:30 Session Orale T12 : Diagnosis and NondestructiveTesting Salle 2
Présidents de session: Sougrati BELATTAR, Djamel BOUKHETALA, Khaled JELASSI,
CO60. ID4: Ameur Fethi Aimer, Ahmed Hamida Boudinar, Nouredine Benouzza and Azeddine Bendiabdellah, Diagnostic des défauts de roulements à billes du moteur asynchrone par l'approche ROOT-AR
CO61. ID41: Omaima Benatia and Fouad Belmajdoub, Méthode de diagnostic des systèmes industriels hybrides- Etude de cas
CO62. ID66: Hicham Halloua, Ahmed Elhassnaoui and Smail Sahnoun, Nondestructive inverse approach for determining thermal and geometrical properties of internal defects in CFRP composites by lock-in thermography
CO63. ID98: Hajar Alaoui Ismaili and Fouad Belmajdoub, Approche de codiagnosticabilité des systèmes à événements discrets sans modèle global basée sur les réseaux de pétri et la succession des transitions
CO64. ID180: Hocine Bendjama, Kaddour Gherfi, Daoud Idiou and Jürgen Bast, Fault Detection using Principal Component Analysis based on Derived Variables
CO65. ID203: Noureddine Bessous, Salah Eddine Zouzou and Mohamed Sahraoui, Diagnostic des Machines à Inductions: Détection du Défaut d’Excentricité Statique et
Dynamique par la Methode de MCSA
CO66. ID205: Sougrati Belatter and Abdelhamid Noufid, Thermal Impedance Applied to Characterization of Defect In plane structures
CO67. ID247: Abderrahman Eddazi and Sougrati Belattar, The Infrared Thermography and the Finite Element Method Applied to the Characterization of a Weld Quality
14:30 – 16:30 Session Invitée S8 : Energies Marines Renouvelables
Salle 3
Présidents de session: Mohamed Machmoum
CI26. ID186: Julien Korecki, Abdelmounaïm Tounzi, Aymen Ammar, Sofiane Bendali and
Daniel Laloy, Numerical study of two synchronous machines aimed to be used in an
off-shore wind power application
CI27. ID281: Bruno Francois and N'Guessan Kouassi, AC Offshore Grid Forming of a
Collection Network for Wind Park by Considering Storage and HYBRID Power
Electronic Systems
CI28. ID305: Mohamed Machmoum, Jian Zhang, Luc Moreau and Houari Azeddine, Design
optimisation and control of a double stator permanent magnet generator for tidal
energy applications
CI29. ID320: Ottavio Angelo Lo Brutto, Sylvain Guillou, Jérôme Thiébot and Hamid Gualous,
Comparing Particle Swarm Optimization method and Genetic Algorithm applied to
the tidal farm layout optimization problem
CI30. ID366: Hamza Ennassiri, Mohammed Ali Benhamida, Mouheb Dhifli, Yacine Amara
and Georges Barakat, Comparision between Axial type Surface Mounted & Switching
Flux Permanent Magnet machines for wind turbine application
CI31. ID367: Jerry Tekobon, Ferhat Chabour and Cristian Nichita, Development of HILS
Emulator for a Hybrid Wind - Tidal Power System
CI32. ID372: Emmanuel Schaeffer, Seddik Ferdjallah, Luc Loron and Mohamed Benbouzid,
Diagnosis of Electrical generator insulation system by model-based approach -
application to the predictive maintenance of offshore turbines
CI33. ID382: Thibaut Kovaltchouk, Hamid Ben Ahmed, Bernard Multon and Judicael Aubry,
Houlogénérateurs : projets, verrous et quelques solutions
16:30 Pause Café
17:00-17:30 Session Poster 2: Modélisation des systèmes (CP35…68)
Président de session: Prof. Abdenouri NAJI
CP36. ID6 : Cherif Bilal Djamal Eddine, Bendiabdellah Azeddine, Bendjebbar Mokhtar and Benouzza Noureddine, Open-circuit fault diagnosis of two-level inverter fed induction motor by the current Park’s vector approach
CP37. ID8 : Mohamed Atibi, Issam Atouf, Mohamed Boussaa and Abdellatif Bennis, MFCC coefficient and ANN classifier applied to roadway classification
CP38. ID14 : Habbati Bellia and Moulay Fatima, Modeling And Optimisation Of Photovoltaic Module By Doe
CP39. ID15 : Mohamed Boussaa, Issam Atouf, Mohamed Atibi and Abdellatif Bennis, Combination of DWT and PCA descriptor applied to ECG image classification
CP40. ID24 : Zineb Benchebha, Mohand Lagha and Maamer Bettayeb, Pulse Doppler
Spectral Moment Estimation By PCA Approach
CP41. ID27 : Fatma Laribi Bn Iffa and Karim Kalti, Image Segmentation By a multi-agent Approach
CP42. ID30 : Djilali Kouchih, Redouane Hachelaf, Mohamed Tadjine and Mohamed Seghir Boucherit, Vector Fault Tolerant Control of Induction Motor Drives using Rotor Resistance Adaptation
CP43. ID34 : Abdelaziz Lakehal, Zine Ghemari and Zoubir Chelli, Fault prediction of oil immersed transformers by mapping Duval triangle into Bayesian network
CP44. ID39 : Asseya El-Amiri, Abderrahim Saifi and Smail Sahnoun, La détection des fissures dans les têtes des pistons en alliage de magnésium Mg-Zn (Y, Gd) par thermographie pulsée
CP45. ID43 : Addou Djamel and Boudraa Malika, Weighted Acoustic Modeling for Robust ASR in GSM codec
CP46. ID59 : Karima Merah, Azeddine Bendiabdellah and Ahmed Bouzidane, bearing faults detection using stator current analysis
CP47. ID65 : Adel Benabboun, Amar Tilmatine and Youssouf Brahami Optimisation expérimentale d’un dispositif de séparation tribo-électrostatique à disques rotatifs plongés dans un lit fluidisé de particules micronisées
CP48. ID78: Majda Kermadi, Saïd Moussaoui, Abdelhalim Taieb Brahimi and Mouloud Feliachi, Comparison of Efficient Global Optimization and Particle Swarm Optimization for Eddy Current Non-Destructive Evaluation
CP49. ID105 : Abderrahim Saifi, Smail Sahnoun, Asseya Elamiri and Ahmed Elhassnaoui, Un nouveau Modèle pour la détermination de la nature des défauts par thermographie pulsée
CP50. ID129 : Chikhi Nawel, Bendaoud Abdelber, Slimani Halima, Baghdadi Benazza and Houcine Miloudi, Perturbations Conduites Générées par deux Convertisseurs Statiques vers un Réseau Electrique
CP51. ID139: Farah Bouakrif, PD-type iterative learning control for perturbed nonlinear systems
CP52. ID154 : Benatman Kouadri and Abdallah Hamoudi, Two Algorithms for Stator Winding Inter-Turn Short-Circuits Detection in Induction Motors by Parameter Estimation
CP53. ID166 : Hicham Halloua, Ahmed Elhassnaoui and Smail Sahnoun, Neural networks for back wall geometry reconstruction using the active thermography
CP54. ID175 : Islam Nacereddine El Ghoul, Ahmed Cheriet, Samir Bensaid and Ala Eddine Lekhdari, Accurate measurement of Aluminum layer thickness in a multilayer material using eddy current sensor
CP55. ID176 : Adel Boudiaf, Achour Saadoune, Hocine Bendjama and A.Y Kadri, Selection of the Most Suitable Decomposition level for Multi-Resolution Analysis
CP56. ID179 : Mohamed Amine Hamdani, Abdelkhalek Nasri and Hassen Zairi, Microwave Biosensors: Design Techniques and Applications
CP57. ID225 : Arwa Nasr, Soufiane Gasmi and Fayçal Ben Hmida, Least Square and Weighted Least Square Estimation methods based on type I censored data
CP58. ID242 : Abdelhamid Noufid and Sougrati Belattar, Diagnosis on Concrete Structures
In-situ with non-Destructive Testing (Sonic Auscultation & Rebond Hammer)
CP59. ID251 : Mohamed Sellaouti and Khaled Jelassi, Localisation et identification des défauts géométriques microscopiques sur des pistes des microrubans par la transformée en ondelettes
CP60. ID261 : Ibtihel Jaziri, Lotfi Charaabi and Khaled Jelassi, A closed Loop DC Motor Control using low cost single-board microcontroller based on embedded Linux
CP61. ID292 : Mohamed Bouhaouche, Abdelouahab Mekhaldi and Madjid Teguar, Composite Insulators in a 400 kV AC Line in Algeria for Improving Electric Field Distribution
CP62. ID302 : Fatiha Babaghayou, Boubakeur Zegnini and Tahar Seghier, Experimental Model Investigation of the Corrosion of Buried Steel Pipelines with Cathodic Protection near High Voltage Power Lines
CP63. ID308 : Hamidreza Zandi, Bernard Davat, Bruno Douine and Fadi Sharif, An overview on different drive topologies and strategies for power ultrasonic piezoelectric transducers
CP64. ID311 : Noureddine Bessous, Salah Eddine Zouzou, Wafa Bentrah, Salim Sbaa and Mohamed Sahraoui, Detection and Diagnosis of Static Eccentricity Fault in Induction Machines Using the MCSA and DWT Method
CP65. ID313, Hoda Ait Dads and Soumaya Elamal Bouzit, Copper Oxide as An Inorganic Hole Conductor for Organo-Lead Halide Perovskite Solar Cells
CP66. ID322 : Adel Boudiaf, A.K Moussaoui, Adel Balaska and Daouad Idiou, A summary of Vibration analysis techniques for fault detection and diagnosis in gears
CP67. ID327 : Aicha Ziouche, Mourad Zergoug and Mounir Amir, Eddy Current Analysis of Titanium submitted to the stress
CP68. ID348 : Bouherine Keltoum, Tibouche Ammar and Labiode Mokhtar, Electromagnetic Modeling of Microwave Plasma Reactor
CP69. ID356 : Yassine Bensafia, Samir Ladaci and Khatir Khettab, Faults detection and diagnosis of a DC motor based on multi-model approach
17:30 -19:30 Table Ronde: Adéquation de l’enseignement supérieur en sciences et technologies
électriques aux attentes des industriels Maghrebins Modérateur : Prof. Janah SAADI (UM6P)
PANEL : Jamel BELHADJ (ENSIT), Jalal BERRADI (OCP), Ahmed BOUBAKEUR (ENP),
Nada ELMAJDOUB (OCP), Mohamed ESSAAIDI (ENSIAS), Driss BELKHAYAT (UCA), Abdelhamid HRAGUA(FENELEC), Badr IKKEN (IRESEN), said
MOULINE (ADEREE), Hamid ELMAHMOUDI (UM6P), Ahmed SQUALLI (AMISOLE)
20:00 Diner de GALA
Vendredi 28 Octobre, 2016
08:30 – 09h30
Conférence Plénière 4: Prof. Abdesslem Djerdir&Prof. Omar Elkedim
Université de Technologie de Belfort Monbéliard Véhicule à pile à combustible
Chairmen: Prof. Mohamed ESSAAIDI & Prof. Kais OUNI
09:30 – 11:00 Session Orale T4: Electric Machines & Drives Salle 1
Présidents de session: Mohamed CHERKAOUI, Nacereddine BENAMROUCHE, Lilia EL AMRAOUI,
CO68. ID47: Kammoun Jalila Kaouthar, Ben Hadj Naourez, Ghariani Moez and Rafik Neji, Induction Motor under Eccentricity Fault based-on Finite Element Analysis
CO69. ID104: Wissem Bekir, Lilia El Amraoui and Frederic Gillon, Dynamic performances determination of a HSM using a finite element validation of the magnetostatic model
CO70. ID106: Aymen Lachheb, Jalel Khedhiri and Lilia El Amraoui, Modeling of a Linear Switched Reluctance Actuator
CO71. ID124: Chafik Eddahmani, Hassane Mahmoudi and Marouane El Azzaoui, Dynamic Modeling of Direct Drive Permanent Magnet Synchronous Generator for Variable Wind speed Turbine
CO72. ID131: Lahcen Ouboubker and Jawad Lamterkati, Fuzzy Direct Torque Control for a Three Level Inverters fed Induction machine with Fuzzy controller of Speed
CO73. ID221: Badii Gmati, Sejir Khojet El Khil and Ilhem Slama Belkhodja, Performance Analysis of Sensorless Control of PMSM Drive Under Open-Switch Fault Condition
09:30 – 11:00 Session Orale T4: Electric Machines & Drives Salle 2
Présidents de session: Abdellah SAAD, Helmi ALOUI
CO74. ID226: Adel Aberbour, Kassa Idjdarene and Abdelmounaim Tounzi, Combined Fuzzy Logic and Sliding Mode Control of an Autonomous Induction Generator
CO75. ID296: Tarek Z. Benhacine, Ali Nesba, Said Mekhtoub and Rachid Ibtiouen, Analyse des performances du générateur asynchrone déséquilibré équipant une éolienne autonome
CO76. ID319: El Mehdi Bahri, Remus Pusca, Driss Belkhayat and Raphael Romary, Active control of torque ripple in a faulty surface permanent magnet synchronous motor. Case of stator inter-turn short circuit
CO77. ID325: Nacereddine Harkati, Luc Moreau, Jean-Frederic Charpentier and Mohammed El Hadi Zaim, Optimized Design of Doubly Salient Permanent Magnet Generator for Tidal Turbine Taking into Account Converter Constraints
CO78. ID338: Andre Nasr, Sami Hlioui and Mohamed Gabsi, Machine à commutation de flux à double excitation. Analyse des performances: Fonctionnement Alterno-Démarreur
09:30 – 11:00 Session Invitée S4 : La Coordination de l'Isolement Salle 3
Présidents de session: Ayadi Amrane, Ahmed Boubakeur, Hocine Moulai
CI34. ID178: Hakim Ait Said, Abdelkrim Laifaoui, Hamou Nouri, Maeziane Kaci, Massinissa
Aissou and Youcef Zebboudj, Effect of humidity on the DC corona discharge
characteristics in wires-planes system
CI35. ID183: Yacine Abderrahmane Bencherif, Abdelouahab Mekhaldi, Jaques Lobry and
Marjorie Olivier, Assessment of composite insulator’s behavior during the aging of its
housing material
CI36. ID271: Nabila Dhahbi-Megriche, Mohamed Amine Abouda and Abderrrahmane
Beroual, On Line Wireless Monitoring Leakage Current of Polluted Insulators
CI37. ID280: Idir Omar, Nacer Azzeddine and Moulai Hocine, Thermal Aging Influence on
Natural Oil Insulation Properties
CI38. ID370: Megherfi Soufiane, Ouatah El Hanafi and Zebboudj Youcef, Etude du
comportement de la propagation des impulsions de décharge partielle dans un câble
de transport d’énergie électrique 18/30 kV soumis au vieillissement électrique sous
tension continue
11:00 - 11:30 Pause Café&Session Poster 3:Conversion de l’énergie (CP70…99)
Présidents de Sessions: Prof. Saida IBNYAICH &Prof. Samira CHABAA
CP70. ID18: Elagoun Abdelkader and Seghier Tahar, Different defects diagnosis of an electrical power transformer bushings
CP71. ID26 : Nabdi Souad and Herrou Brahim, Le potentiel éolien au Maroc
CP72. ID40: Boucetta Abd Allah, Mansour Zohra, Labed Djamel and Maiche Asma, Control of Voltage Curent and harmonic of a Photovoltaic CentralGrid Connected With a Rated Power of 1 MW
CP73. ID71: Rachid Masrour and Abderrahim Jabar, Monte Carlo simulations of the magnetocaloric effect in PrSi compound
CP74. ID87: Amor Fezzani, Hadj Mahammed Idriss, Abdelhak Bouchakour, Layachi Zaghba, Samir Hamid Oudjana and Messaouda Benbitour, Experimental Study of One Diode Modeling under Partial Shading of Photovoltaic Module
CP75. ID113: Belkacem Yousfi and Boubakeur Zegnini, Electric field and potential distribution within a XLPE insulated cable containing a void-defect
CP76. ID126 : Adjim Ilhem and Adjim Nasr Eddine, Etude de l'influence de la polarité sur la rigidité diélectrique de l'air
CP77. ID130: Houria Sadouni, Gherbi Fatima Zohra and Djaffar Ould-Abdeslam, Simulation for Smart Grid Integration of Solar/Wind Energy.
CP78. ID136 : Mustapha Errouha, Saad Motahhir, Aziz Derouich and Abdelaziz El Ghzizal, Validation expérimentale du modèle d’un panneau photovoltaique et application dans le pompage solaire ' Cas de la station de pompage de l’Ecole Supérieure de Technologie de Fès'
CP79. ID145: Mostefa Kermadi and El Madjid Berkouk, Supervision Strategy for Grid-Connected PV-Battery Energy System supplying Household load
CP80. ID150: Ben Mahmoud Zouhaira, Hamouda Mahmoud and Khedher Adel, Effects of Series and Shunt Resistances on The Performance of PV Panel Under Temperature Variations
CP81. ID151: Fateh Benchabane, Abderezzak Guettaf, Khaled Yahia, Ouafae Bennis and Abdenacer Titaouine, An improved efficiency of SVM DTC-PMSM drive scheme for photovoltaic water pumping system
CP82. ID195 : Jbilou Mokhtaria, Bousmaha Imane Souhila and Brahami Mostefa, Evolution
du fonctionnement d’un onduleur monophasé équipant un générateur photovoltaïque
CP83. ID209 : Ali Lamkaddem, Khalil Kassmi and Rachid Malek, Conception et Modélisation d’un Système Photovoltaïque Connecté au Réseau Électrique
CP84. ID211: Yacine Mecheri and Slimane Bouazabia, Effect of conductive contaminants on the electrical behavior of EHV XLPE cable insulation
CP85. ID224: Laib Abdelbaset, Krim Fateh and Talbi Billel, Simulation of fuzzy logic MPPT through sliding mode current control
CP86. ID233: Kamal Hirech, Mustapha Melhaoui, Ilyas Atmane, Khalil Kassmi and Rachid Malek, A new MPPT approach for photovoltaic stand-alone systems
CP87. ID245: Asmaa Chakhmane, Hassan El Idrissi, Abdelhamid Elkaaouachi and Mohamed Errai, Electrical conduction in a two dimensional insulating 2D p-GaAs
CP88. ID246: Karim Mansouri, Mouna Ben Hamed and Lassaad Sbita, Design and PC Implementation of a Graphical Interface for Electric Power Management
CP89. ID250 : Ilias Atmane, Khalil Kassmi, Kamal Hirech, Mustapha Melhaoui and Rachid Malek, Commande et supervision à distance des installations Photovoltaïques muni de commande MPPT
CP90. ID265: Fawzi Senani, Abderezzak Rahab and Hocine Benalla, Modeling and Control of Active and Reactive Powers with DC-Link control for Variable Speed Wind Turbine based on DFIG
CP91. ID270 : Othmane Zamzoum, Youness El Mourabit, Aziz Derouich and Abdelaziz El Ghzizal, Etude et implémentation de la commande MPPT appliquée à un système éolien à vitesse variable à base d’une MADA à commande MLI-vectorielle
CP92. ID315: Mounir Chaik, Hind El Aakib, Abdelkader Outzourhit and Cheikh Sambeval, Comparison between optical properties of aluminium- and cobalt-doped and indoped Zinc Oxide thin films prepared by RF sputtering
CP93. ID334: Kamal Elyaalaoui, Mohamed Ouassaid and Mohamed Cherkaoui, Inertia Power Reserve For Primary Frequency Control of Wind Turbine Based SCIG
CP94. ID336: El Akhrif Rachid, Ahmed Abbou and Youssef Majdoub, Voltage control for a three-phase source inverter fed by a self-excited induction generator
CP95. ID346: Hind El Aakib, Mounir Chaik and Abdelkader Outzourhit, Effect Of Nickel And Titane Doping On Nanostructured Cuo Thin Films Deposited By Rf Sputtering
CP96. ID359: Abdelkader El Kissani, Lahcen Nkhaili, Kassem El Assali and Abdelkader Outzourhit, Synthesis of Cu2ZnSnS4 via sol gel method and fabrication of solar cells for application
CP97. ID368: Fayrouz Dkhichi, Benyounes Oukarfi, David Ouoba, Abderrahim Fakkar and Amina Achalhi, Behavior of Neural Network MPPT Technique on a PV System Operating under Variable Load and Irradiation
CP98. ID377 : Kamel Sahlaoui and Salah Ben Mabrouk, Etude et Simulation d’un Capteur hybride Photovoltaique Thermique à air
CP99. ID378: Hicham El Ferouali, Ahmed Zoukit, Issam Salhi, Said Doubabi, Toufiq El Kilali and Naji Abdenouri, Applying CFD studies for designing of an efficient hybrid solar-gas-electric dryer with energy storage
11:30 – 13:00 Session Orale T9 : Automation & Control Salle 1
Présidents de session: Abdellah BENZAOUIA, Said DOUBABI, Mohamed Seghir BOUCHERIT, Fayçal BEN HMIDA,
CO79. ID144: Abderrahmane Gaidi, Hocine Lehouche and Samir Belkacemi, Direct adaptive Backstepping control of wind turbine two masse model
CO80. ID255: Yantour Hamid and Janah Saadi, Nouvelle approche de modélisation de la commande directe du couple appliquée à la machine asynchrone
CO81. ID299: Abderrahmen Bouguerra and Samir Zeghlache, Speed Control of a Brushless DC Motor (BLDCM) Based on Fuzzy Gain-Adaptive PI
CO82. ID316: Sonia Batis and Hassane Alla, Control approach for a class of hybrid systems
CO83. ID355: Samir Ladaci, Fractional Adaptive Control of a Two-Mass-Spring System Using a Direct Pole Placement Algorithm
11:30 – 13:00 Session Orale T13: Modeling and Numerical Methods
Salle 2
Présidents de session: Mohamed HASNAOUI, Kamel BOUGHRARA, Sofiane KASMI,
CO84. ID162: Hind Jaafar, Abdellah Aouaj and Ahmed Bouziane, An analytical modeling and Numerical Simulation for Dual Metal Gate-Graded, Channel-Dual Oxide Thickness of Surrounding Gate MOSFET
CO85. ID200: Flitti Aicha and Tazrout Housseyn, Résolution numérique bidimensionnelle de l’équation de dérive-diffusion
CO86. ID272: Oussama Bouaziz, Imen Jaafar and Faouzi Ben Ammar, 3D Finite Element Modelling and Comparative Performance Analysis Between Axial and Radial Flux Machines for Micro Wind Turbine Application
CO87. ID295: Abderrahim Wakif, Zoubair Boulahia and Rachid Sehaqui, The Effect of a Uniform Heat Source on the Onset of Convection in Newtonian Nanofluids
11:30 – 13:00 Session Invitée S7: Distributed renewable energy systems
Salle 3
Présidents de session: Aawatif Hayar, M. KHEDDIOUI
CI39. ID197: Anass Gourma, Abdelmajid Berdai, Moussa Reddak, Abdelaziz Belfqih and
Faisal Elmariami, Impact de l’intégration de la génératrice asynchrone à double
alimentation sur l’écoulement de puissance
CI40. ID259: Otmane Zebraoui and Mostafa Bouzi, Sizing and optimization of a fully
autonomous hybrid PV-Wind power system
CI41. ID332: Sabiri Zakaria, Elm'Kaddem Kheddioui, Nadia Machkour, Nabila Rabbah and
David Ouoba,non-linear command of wind turbine based on Doubly-field Induction
generator
CI42. ID339: Youness El Mourabit, Othmane Zamzoum, Aziz Derouich and Abdelaziz
Elghzizal, Contrôle FOC-PWM associé à une commande MPPT d’une Génératrice
Synchrone à Aimant Permanent utilisée dans une éolienne
CI43. ID235: Laraki Mehdi, Hayar Aawatif, Sendama Ntwali Benjamin, Elm Kheddioui and
Zazoui Mimoun, Public street-lamps autonomy increasing based on self lighting
concept
13:00 Cérémonie de cloture & Déjeuner
15:00 Visite de Green Energy Park
La 2èmeConférence Internationale en Sciences
Et Technologies Electriques au Maghreb
26 - 28 Octobre, Faculté des Sciences Semlalia,
Marrakech, Maroc
Contact :