2015/16 - gardening aids ltd . 137 wairau road auckland · 2020-07-19 · suits model t540xp...

2015/16 ACCESSORIES

2 | CONTENTS CONTENTS | 3

CONTENTS

PAGE 4• Arborist Accessories

PAGE 5• Axes

PAGE 6• Chain & Bar Maintenance Equipment• Forest Tools & Accessories

PAGE 8• Lubricants & Fuel Containers

PAGE 9• Harnesses

PAGE 10• Trimmer & Brushcutter Accessories

PAGE 11• Blower Accessories

PAGE 12• Battery Accessories• Protective Clothing

PAGE 14• Safety Helmets, Hearing &

Eye Protection

PAGE 15• Safety Footwear• Automower® Accessories

PAGE 16• Wheeled Accessories

PAGE 18-25

• Technical Specifications Glossary

IMPORTANT INFORMATION

Husqvarna conducts continuous product development and reserves the right to change designs, specifications and equipment levels without prior notification. Always read the instructions carefully before use, as products with moving parts can be dangerous if used incorrectly. All images in the catalogue are for illustrational purposes only. All technical data was current at the time of printing, however these may change as a result of further product development. Product availability, standard features and equipment may vary from market to market. Optional equipment may be purchased at an additional cost. Please check with your Husqvarna dealer for products recommended and approved in your market.

HUSQVARNA TAKES CARE OF YOU AND YOUR EQUIPMENT.A good job becomes better, safer and more enjoyable with the right accessories, protection and clothing. So when we develop accessories, supplementary tools and clothing, we apply the same thinking as when we develop our other products: We listen to the most demanding customers and let their views form the basis for our product design and our choice of materials.

AXESARBORIST ACCESSORIESAXES | 54 | ARBORIST ACCESSORIES

TECHLITE™ BAR - ARBORIST20 % lighter than a regular laminated bar and with 25 % better rigidity. It’s less susceptible to bending and has a low weight, which gives a more balanced chainsaw.

5768307-45 12” bar 3/8” Mini TechLite™ Small bar mount 1.3mm

5768307-52 14” bar 3/8” Mini TechLite™ Small bar mount 1.3mm

TECHNICAL EXTREME - JACKET & TROUSERS Modern design with slim fit and advanced stretch material for excellent comfort. Strong reinforcement material is used on critical areas to provide added protection. Two-way ventilation zippers for comfort. Reflective and high-viz orange fabrics. Trousers feature saw protection and are certified to EN 381-5, EN340 class 1, 20 m/s, fully compliant with AS/NZS 4453:1997. Jacket and trousers available in S, M, L, XL, XXL sizes. (refer page 12)

PROTECTIVE BOOTS - TECHNICALHighly comfortable protective boot made with composite toe cap which keeps the boot low in weight. Made of nylon mesh and high quality leather Sympatex® membrane material that makes the boot comfortable all day and 100% waterproof. The Gravity® sole is oil resistant and gives it perfect grip. The front part of the boot is reinforced with extra rubber protection. Available in a range of sizes from 3 - 12.

5753547-XX Protective Boots - Technical (refer page 15)

EYELET - FOR CHAINSAW HANDLEEyelet with unique design and overload release, made for arborists who use a standard chainsaw. The loop is attached to the grip of the saw, which can then be connected to a strop or directly to the chainsaw hook.

5780771-01 Eyelet

METAL CHAINSAW HOOKThe robust auto-lock hook is easily attached to any harness with removable belt. Designed for easy connection of chainsaw to a belt.

5774379-01 Metal Chainsaw Hook

CHAINSAW STROPTo be used together with a chainsaw hook for connecting the chainsaw to a belt or harness. The elastic design provides a soft stop in the event of the chainsaw being dropped at height, minimising impact on the saw and operator. Measures 0.5m when relaxed and 1.25m fully stretched out.

5774380-01 Chainsaw Strop

CHAINSAW HOOK - PETZLDesigned for easy connection to a belt, the hook slips through the waistbelt slots or along the harness webbing and stays in place, due to a stabilizing clip.

5808003-01 Chainsaw Hook - Petzl

SAW CHAIN H37Specifically designed for arborist use, the H37 chain is characterised by lightweight and improved bore cut abilities. It also has a low kick-back feature for improved safety. 3/8” Mini pitch, 1.3mm gauge. Suits model T540XP chainsaw.

5769365-45 Suits 12” bar - 45 drive links

5769365-52 Suits 14” bar - 52 drive links

ARBORIST HELMET, TECHNICALLightweight and ventilated helmet for professional arborists, approved for work at heights. Has a unique harness adjustment with two wheels that centres the head in the helmet for best balance and stability. Not approved for forestry work on the ground. Certified to EN12492, ANSI Z89.1-2009 Class C.

5780923-01 Arborist Helmet, Technical

TECHNICAL GLOVE, SAW PROTECTIONTechnical glove with saw protection and goat leather palm. Meets requirements of EN 381-7, Class 1, 20m/s and EN 388 mechanical hazards CAT II. Available in sizes 8-10.

5793810-XX Technical glove, saw protection (refer page 13)

AXES - FIBRE-REINFORCED POLYAMID SHAFTHigh quality axes with fibre-reinforced polyamid shaft for maximum durability. Designed with the balance point close to the axe head for perfect balance and weight distribution. The axe head features a non-stick coating for easy entry into the wood and reduced friction. The soft grip and hooked end of the handle prevents slipping for secure handling.

HEAD WEIGHT TOTAL WEIGHT HANDLE LENGTH

5807610-01 Universal Hatchet H900 700g 900g 34cm

5807611-01 Universal Axe A1400 1000g 1400g 60cm

5807612-01 Universal Axe A2400 1800g 2400g 70cm

5807613-01 Splitting Axe S1600 1200g 1600g 60cm

5807614-01 Splitting Axe S2800 2300g 2800g 70cm

AXES - HICKORY SHAFTHigh quality Swedish steel blade and hickory shaft, with leather edge guard.

TOTAL WEIGHT LENGTH

5769264-01 Hatchet 0.5 37.5cm

5769262-01 Limbing Axe 0.85 65cm

5769268-01 Small Splitting Axe 0.9 50cm

5769267-01 Splitting Axe 1.5 75cm

5769266-01 Sledge Axe 2.5 80cm

5769267-02 Rep. Handle – Splitting Axe 75cm

5769266-02 Repl. Handle - Sledge Axe 80cm

SHAFT PROTECTIONThe stainless steel shaft protection with rivec connection, provides additional protection of the handle for longer life.

ERGONOMIC HANDLEModified glass-fiber reinforced PA ensures high impact power because of the lightweight and robust handle material - effective impact energy can be concentrated with the highest impact in the heavy axe head. The handle features soft components that provide a non-slip grip, comfortable touch/feel and perfect ergonomics. The hooked end of the handle prevents the axe from slipping out of the hand.

HAMMER FUNCTIONExtra wide and durable milled backside of the axe head can be used effectively for hammering a wedge. The special milled area preserves wedges and chopping block. For use with plastic, wood and aluminium wedges only (no steel).

BLADE GEOMETRYThe blade geometry design ensures easy entry in the wood and best splitting effect due to the hollow grinding of the blade. Optimal angle geometry for optional splitting performance (adapted to the application).

BALANCE POINT CLOSE TO THE AXE HEADThe balance point close to the axe head enables high splitting power, because the maximal impact effect is concentrated in the heavy axe head. This ensures excellent weight distribution.

FOREST TOOLS & ACCESSORIES

FOREST TOOLS & ACCESSORIES | 76 | CHAIN & BAR MAINTENANCE EQUIPMENT

CHAIN & BAR MAINTENANCE EQUIPMENTINTENSIVE-CUT FILESHigh quality, round, Husqvarna saw chain files made in Germany. New upgraded design for up to 20% improved cutting performance and longer life.

5100957-01 4.0mm(5/32) - 6 x 2pk

5100957-02 4.0mm(5/32) - 12pk

5772337-01 4.5mm - 6 x 2pk

5100955-01 4.8mm(3/16) - 6 x 2pk

5100955-02 4.8mm(3/16) - 12pk

5100956-01 5.5mm(7/32) - 6 x 2pk

5100956-02 5.5mm(7/32) - 12pk

FLAT FILESHigh quality, flat, Husqvarna saw chain files made in Germany. Single cut for precision filing.

5056981-60 Flat File - 6”

5056981-80 Flat File - 8”

COMBINATION FILE GUIDE The combination file guide helps ensure the correct filing angle and simplifies the filing process.

5806874-01 Combination File Guide & Depth Gauge 1/4” (H00)

5056981-08 Combination File Guide & Depth Gauge .325” Pixel (H30)

5056981-09 Combination File Guide & Depth Gauge .325” (H21/22/23/25/26/28)

5052435-01 Combination File Guide & Depth Gauge 3/8” Chisel H42X/45X/46X/47X/48X/50X)

5759915-01 Combination File Guide & Depth Gauge 3/8” Semi Chisel (H51/52/54/58)

HUSQVARNA FILING KITS The file kits contain a file handle, combination gauge - or a file gauge and depth gauge - two round files and one flat file.

5806875-01 1/4” (H00)

5056981-25 325” (H21/22/23/25/26/28)

5056981-27 325” Pixel (H30)

5056981-30 3/8” (H42X/45X/46X/47X/48X/50X)

5796536-01 3/8” LP (H37)

5056981-38 3/8” LP (H35, H36)

5056981-92 404” (H56S/57/64/64S/65/66)

CHAIN MAINTENANCE ACCESSORIESPrecision Filing Guide: Professional model filing guide can be used with 6” - 8” round files as well as flat files.

Stump Vise: For professional and hobby users. Holds the guide bar firmly when filing.

5776157-20 Precision Filing Guide (FLO020)

CARRY CASE Sturdy, stackable design with moulded compartments to hold accessories. Comes standard with 18”-20” guide bar cover. Fits up to model 576XP.

5026749-01 Carry Case (HCCASE)

FOREST BAG Strong and durable bag with a hard and stable bottom. Equipped with side pockets, grip handles on sides, carrying straps and a removable shoulder strap.

5768595-01 Forest Bag

MEASURING TAPE & ACCESSORIESSimple, lightweight design that can be adjusted without tools. Marked on both sides of tape. Contact customer service for full spare parts list.

5056973-15 15M Loggers Tape with release hook

5056973-01 15M Spare Tape

5056973-04 15M Spare Tape - Scissor Hook

5056973-20 20M Loggers Tape with release hook

5056971-05 20M Spare Tape

5056972-10 Release Hook

LIFTING HOOKS & TONGS Lifting hook features comfortable handle and a scale for measuring tip diameter. Tongs are made of high quality steel with ergonomic handle.

5743874-01 Lifting Hook

5743875-01 Lifting Tongs small (20cm)

5743876-01 Timber Tongs (30cm)

STARTER CORD

5310038-75 Starter Cord (100m x 3.0mm)




COMBI-TOOLS High quality steel combination spanners with two sizes of socket on each tool.

5016917-01 13mm x 19mm

5031396-01 13mm x 19mm (Long Shaft)

WEDGES Professional range of high quality felling and splitting wedges. Choice of tough polyamide, magnesium or steel.

5056947-02 5” Polyamide Wedge - 14cm

5056947-00* 5” Magnesium Wedge - 12cm (TLO012)

5784568-01* 7” Straight Splitting Wedge

5772592-01 7” Curved Splitting Wedge

5868859-01* 7” Aluminium Wedge - 500 gm



5868859-02* 10” Aluminium Wedge - 25cm, 1000gm

6082010-02 12” Polyamide Wedge * ONLY available in AU

CHAINSAW MITTLeather Chainsaw Mitt for New Zealand Forestry workers.5045345-01# Chainsaw Mitt - Leather

#ONLY available in NZ

GUIDE BAR COVERS Made of tough, impact-resistant plastic for maximum protection.

5018344-09 13-16”

5018344-11 18-22”

5018345-04 24-28”

5370722-01 30-42”

TELESCOPIC POLE SHAFT Easy adjustable length from 2.5m to 5.0m. Made of fibre-glass so it’s safe to use around electrical installations. Use with Pruning Saw (5056945-46) .

5024273-01 Telescopic Pole Shaft (2.5m - 5.0m)

5024256-03 Locking Sleeve (31mm - 35mm)

5024252-05 Locking Sleeve (27mm - 31mm)

5024253-03 Wing Nut

PRUNING SAW WITH BARK BLADE For use with telescopic shaft. Curved blade with hook at tip and blade for cutting bark to prevent splitting. For use with telescopic pole shaft (5024273-01)

5056945-66 Pruning Saw with Bark Blade 33.3cm

CLEARING SAW ACCESSORIES Filing equipment to maintain Clearing Saw blades in optimal cutting condition.

5056981-20 File Gauge - Clearing Saws

FILING CLAMP (STUMP VISE) This portable filing clamp digs into any wood surface to secure your bar and sharpen your chain much easier.

5056652-56 Husqvarna Stump Vise

5776168-30 Husqvarna Stump Vise (TLO030)

FILE HANDLE Patented file locking system that can hold round or flat files. Shows 25° and 30° angles to ensure correct filing.

5056978-01 File handle (Ctn 20)

DEPTH GAUGES Get maximum performance from your chain when the depth gauges are filed to the correct height. Each depth gauge tool has settings for hard or soft wood.

5056981-00 .325”

5056981-03 3/8” Low Profile

5056981-01 3/8” Standard

5056981-02 .404”

FILE GUIDES Specially designed file guides that give the filing angles, use together with our round files.

5806874-01 File Gauge 1/4” (H00)

5056981-10 File Gauge .325” (H21/22/23/25/26/28)

5052437-01 File Gauge 3/8” LP (H35,H36,H37)

5795588-01 File Gauge 3/8” LP (H38)

5056981-15 File Gauge .404” (H56S/57/64/64S/65/66)

HANDSAWSDesigned with hard chrome plated blade for high corrosion protection and abrasion resistance. The ergonomic handle features soft components for a better grip.

967 23 64-01 Foldable Handsaw 200mm HVA200FO

967 23 65-01 Fixed Straight Handsaw 300mm HVA300ST

967 23 66-01 Fixed Curved Handsaw 300mm HVA300CU

GREY TROLLEY BAGStrong and durable bag with a hard and stable bottom. Equipped with wheels, retractable towing handle, side pockets, grip handles on sides, carrying straps and a removable shoulder strap.

5768590-01 Grey Trolley Bag

CHAINSAW BAGEspecially made for your chainsaw. Extra pockets for the chainsaw files and a Velcro fastening pocket placed on the outside.

5768591-01 Chainsaw Bag

BREAKING BARS Fully forged with plastic handle, repeat heel and turning hook.

5056943-01 Breaking Bar – 76cm

5743872-01 Impact Bar (Long) 130cm

5049816-92# Telescopic Breaking Bar # ONLY available in NZ

NEW!

HARNESSESLUBRICANTS & FUEL CONTAINERSHARNESSES | 98 | LUBRICANTS & FUEL CONTAINERS

VEGOIL Vegetable based chain oil which is biodegradable and economical. Can be cleaned with common detergents.

5440451-01 1 Litre (Ctn 12)

5310075-20 5 Litre

2-STROKE OIL HPFormulated to work well with mixed fuel blends. Produces lower engine temperature and extends the engine life.

5440158-09 1 Litre dosage (Ctn 12)

5440158-10 4 Litre (Ctn 4)

2-STROKE OIL LS+Handles high loads during tough professional usage. Produces lower engine temperature and extends the engine life.

5781803-02 0.1 Litre

5780370-02 1 Litre

5780371-02 4 Litre

5781800-02 10 Litre

4-STROKE OIL (HUSQVARNA 10W/30) Husqvarna SAE10W/30 4-Stroke Engine Oil is a premium, multi-grade engine oil and has been specially compounded and approved for use with Husqvarna Endurance Series engines, and other 4-Stroke, air-cooled engines. Specification: SAE 10W30 - API SM (Petrol), API CF-4 (Diesel).

5310092-71 10W/40 4-Stroke Oil 0.08L (Ctn 50)

5769019-01 10W/30 4-Stroke Oil 1 Litre (Ctn 12)

5769019-02 10W/30 4-Stroke Oil 4 Litre (Ctn 4)

5769019-03 10W/30 4-Stroke Oil 20 Litre

AIR FILTER OILS Effectively traps particles in the filter, keeping the engine cleaner and reducing wear.

5555000-81 HD Foam Filter Oil 250ml

5027189-01 Air Filter Spray - Motorex 655 (Ctn 12) 476gm/750ml

5047053-01 Air Filter Spray - Motorex 655 (Ctn 4) 476gm/750 ml

GREASE AND SHARPENING PASTEA range of premium quality greases for bevel gear and drive shaft lubrication. Sharpening paste aids in sharpening mower and edger blades.

5036212-01 Grease Sachet 40g

5039764-01 Eco.Bevel Gear Grease 100g

GREASE GUN High quality plastic grease guns for lubricating bar tip bearing and clutch needle bearings.

5047002-01 Grease Gun

MINERAL CHAIN OILMineral chain oil with adhesive agent for high-performance chainsaws. Made from a premium blend of base stocks and tackifier additives which reduces high speed throw off. Extends bar, chain and sprocket life.

5793960-01 1 Litre5793961-01 5 Litre5793962-01 20 Litre

Adjustable backplate in 3 positions clockwise.

Adjustable backplate in 3 positions up and down.

Adjustable belt in front - two positions.

BALANCE XT™ HARNESSThe Balance XT™ Harness features wide, padded, body-hugging straps that make the harness comfortable to wear and reduce stress on the upper body and shoulders. The simple adjustment in the front can be used in two different positions, ensuring maximum comfort for both men and women. A wide and padded hip belt helps to reduce strain on the hips , while the floating pad system reduces strain on the back. The effective quick release mechanism makes it easy to release the product and makes work safer.

5784498-01 Harness - Balance™ XT

BALANCE X™ HARNESS Easy to adjust for best fit, the Balance X™ Harness features a comfortable chest plate and hip belt that ensures the harness distributes the load evenly across a large area for added comfort. The floating pad system reduces the risk of back strain. The harness has a ventilated back plate and wide shoulder pads, providing even weight distribution between both shoulders and also between the hips and shoulders. The shock absorbing hip pad can be adjusted for grass or forest position and has a travel connection. The quick release easily removes the product from the harness.

5784497-01 Harness - Balance X™

STANDARD HARNESS Designed for use with lighter brush cutters and trimmers. Features adjustable, padded shoulder straps for individual comfort. Simple and effective quick release on chest makes it easy to release the product.

5372163-01 Standard Harness

DUO BALANCE™ HARNESS An ergonomic harness that distributes the load optimally between shoulders, chest and back. Wide padded straps and back plate reduce the load on the upper body. Equipped with shock absorbing hip pad that has a travelling connection so that the machine can be manoeuvred easily with minimal impact on the body, further saving the user’s back.

5372757-01 Harness - Duo Balance™ 55

BALANCE FLEX™ HARNESS (FOR POLE PRODUCTS)To be used with all kinds of pole products. The product is attached to the harness by open hooks, making it easy to use and quick to start/stop. The Balance Flex™ Harness evens the load distribution over both shoulders due to the padded shoulder straps, which acts as a support when using the product in different angles and heights.

A lifting force is used to help hold and lift the product. The harness gives good support when using pole products for different kinds of work, high or low, far away or close, which results in better ergonomics.

5784499-01 Harness - Balance Flex™

SHOULDER STRAP Simple shoulder strap for smaller trimmers. Easy to remove the harness with one hand if needed.

5372162-01 Shoulder Strap

NEW! NEW!

HUSQVARNA COMBI CANRedesigned Combi Can to achieve an optimized fuel and chain oil ratio (5.0 / 2.5 litres), also includes an integrated tool box. Approved in accordance with UN recommendations.

5807542-01 CombiCan 5 + 2.5L

5861104-0 Fuel Spout for CombiCan 5 + 2.5L

5861105-01 Oil Spout for CombiCan 5 + 2.5L

5861107-01 Winter Oil Spout for CombiCan 5 + 2.5L

HUSQVARNA FUEL CAN 15L15 litre fuel can for wheeled machines features three uniquely placed, ergonomic grips and a special spout design. Easy to lift, carry and refuel without any splash or waste.

5807545-01 Fuel Can 15L

5861106-01 Fuel Spout for Fuel Can 15L

FUEL CAN - 5 LITRES Husqvarna metal fuel can with pouring spout.

5026762-01* 5 Litre Fuel Can (Ctn 6) * AUE only

BLOWER ACCESSORIES | 11

TRIMMER & BRUSHCUTTER ACCESSORIES10 | TRIMMER & BRUSHCUTTER ACCESSORIES

GRASS BLADE For dense, coarse grass, but not for woody growth. Grass falls onto the blade for neat rows. Four to eight teeth.

5784442-01 8 Tooth, 255mm Ø, 20mm Arbor

5784440-01 8 Tooth, 255mm Ø, 1” Arbor


5784437-01 4 Tooth, 255mm Ø, 1” Arbor

MULTI BLADE For dense, coarse grass, but not for woody growth.


5784449-01 3 Tooth, 255mm Ø, 1” Arbor


5784447-01 4 Tooth, 275mm Ø, 1” Arbor


5784445-01 3 Tooth, 300mm Ø, 1” Arbor

SAW BLADE - MAXI The original Husqvarna Saw Blade. Robust and reliable.

5784429-01 22 Tooth, 200m, Ø, 20mm Arbor



5784431-01 26 Tooth, 200mm Ø, 1” Arbor


SAW BLADE - SCARLETTSuperior cutting performance, low vibration saw blade.

5784425-01 22 Tooth, 200mm Ø, 1” Arbor



5784427-01 24 Tooth, 225mm Ø, 1” Arbor

SUPPORT CUPS Prevents the blade from digging into ground. Two versions. One rotates with the blade and the other runs on bearings for extended life.

5038901-01 Support Cup (M10), black

5038901-02 Support Cup (M12)

5039018-02 Fixed Support Cup 20mm, grey

5021570-02 Support Cup w/ Bearing (M12)

J-HANDLE Converts loop handled units to blade use.

Kit includes;

• Grass cutting blade• Flange washer• Support cup• Combi blade guard (suitable for line & blade)• “J” handle• Shoulder strap• Combi tool• Saw blade guard kit (200mm)

5370485-01 J-Handle Kit

9527156-16 J-Handle Kit - 125L

5442496-01 J-Handle Kit - Suits 335LS / 535LS

ALLOY TRIMMER HEAD A robust and reliable trimmer head with quick and easy line loading. Suitable for any Husqvarna trimmer line and designed for an optimal line locking. The maintenance is minimised and the low cutting height gives an attractive and tidy result.

5784482-01 Aluminium Fixed Line Head (1pk)

5759901-01 Aluminium Fixed Line Head - Bulk Pack (10pk)

TRIMMER HEAD - MANUALTrimmer head with manual cord feed. The cord is fed manually by the user when pushing the cord feed button and pulling the cord.

5784474-01 Trimmer Head-S35 (M10)

5784476-01 Trimmer Head-S35 (M12)

TRIMMER HEAD - TRIMMY SII M125784478-01 Trimmer Head SII M12 Manual

TRIMMER HEAD – TAP ’N GO™Tap ‘N Go™ heads feature a semi-automatic cord feed system. The trimmer line is fed automatically when the head is pushed into the ground. This means that the user always controls when the line is fed and the line can be fed while working with the machine. The machine does not need to be turned off or released from the harness while feeding is taking place.

9666744-01 Trimmer Head-T25 (3/8” RH, LH, M10)

5784465-01 Trimmer Head-T35-X (M10)




TRIMMER HEAD – AUTOMATIC Cord is fed automatically when it is too short. The cord length is self-adjusting.

5310092-26 Trimmer Head-Auto 55 (M12) 1”

TRIMMER HEAD – TRI-CUTFor coarser grass and terrain with stones. Highly visible, replaceable plastic flails, safe for use around trees and bushes.

5784491-01 Tri-Cut (M10)

5784493-01 Tri-Cut (M12)

5310177-14 Plastic Blade Tri-Cut (255mm) Pkt 6

5310177-15 Plastic Blade-Tri Cut (300mm) Pkt 6

125BVX HANDHELD BLOWER 9527119-18 Gutter Cleaning Kit (3m tube length)

BLOWER ACCESSORIES

SHREDDER BLADE KITContains shredder blade, guard, holder, bracket, support flange and bolts.

5448429-01 Shredder Blade Kit (suits 345FR)

TRIMFORCE™ TRIMMER LINE Commercial grade co-polymer pentagon-shaped orange string trimmer line with great cutting performance, reduced breakage and welding. Fits all standard trimmer heads.

2.0mm Green

6390061-02 2.0mm - .080” 50’ Teardrop

6390061-03 2.0mm - .080” 1/2 lb Donut

6390061-04 2.0mm - .080” 1 lb Donut

2.4mm Orange

6390061-08 2.4mm - .095” 50’ Teardrop

6390061-09 2.4mm - .095” 1/2 lb Donut

6390061-10 2.4mm - .095” 1 lb Donut

6390061-11 2.4mm - .095” 3 lb Spool

2.7mm Yellow

6390061-14 1/2 lb. Donut - .105” 1/2 lb Donut

6390061-15 1 lb. Donut - .105” 1 lb Donut

6390061-16 3 lb. Spool - .105” 3 lb Spool

6390061-17 5 lb. Spool - .105” 5 lb Spool

3.3mm Red

6390061-19 1/2 lb. Donut - .130” 1/2 lb Donut

6390061-20 1 lb. Donut - .130” 1 lb Donut

6390061-21 3 lb. Spool - .130” 3 lb Spool

6390060-22 5 lb. Spool - .130” 5 lb Spool

XP FORCE™ TRIMMER LINE Extreme Commercial Grade dual polymer string trimmer line in a metallic green color that blends with grass. The same dimple shape of our X Force™ Trimmer Line is combined with the cutting edge technology of a strong abrasion resistant outer skin. Fast acceleration and level flight characteristics allow for reduced fuel consumption and makes the line run quieter. Fits all standard string trimmer heads. Lasts 30% longer than traditional trimmer line depending on application.

2.7mm Yellow

5050316-05 1 lb. Donut - .105” 1 lb Donut

5050316-07 3 lb. Spool - .105” 3 lb Spool

3.3mm Red

5050316-09 1 lb. Donut - .130” 1 lb Donut

5050316-08 3 lb. Spool - .130” 3 lb Spool

NEW!

NEW!

12 | BATTERY ACCESSORIES

PROTECTIVE CLOTHING

BATTERY ACCESSORIES

PROTECTIVE CLOTHING | 13

TECHNICAL EXTREME JACKETModern design with slim fit and advanced stretch material for excellent comfort. Strong reinforcement material is used on critical areas, including the unique pre-bent arms, to provide added protection. Two-way ventilation zippers under the arms. Reflective fabric on the arms, reflective band.

5850615-46 Small (92cm - 100cm)

5850615-50 Medium (100cm - 108cm)

5850615-54 Large (108cm - 116cm)

5850615-58 X-Large (116cm - 124cm)

5850615-62 XX-Large (124cm - 128cm)

TECHNICAL EXTREME TROUSERS Trousers with the same slim fit, stretch, and reinforced material as the jacket, plus chainsaw protection. Unique pre-bent knees and ventilation zippers at the backs of the legs. Velcro adjustments around the waist ensures a perfect fit for both men and women.

5781665-46 Small (170cm - 176cm)

5781665-50 Medium (176cm - 182cm)

5781665-54 Large (176cm - 182cm)

5781665-58 X-Large (182cm - 188cm)

5781665-62 XX-Large (188cm - 194cm)

TECHNICAL JACKETFitted jacket with four-way stretch material for ease of movement. Reinforced material for high durability, two-way ventilation zippers for additional comfort. The reflective fabric on the arms, a reflective band and high-viz orange fabric at the top, provides increased visibility.

5781660-46 Small (92cm - 100cm)

5850613-50 Medium (100cm - 108cm)

5850613-54 Large (108cm - 116cm)

5850613-58 X-Large (116cm - 124cm)

5850613-62 XX-Large (124cm - 128cm)

TECHNICAL TROUSERSTrousers with the same tight fit, stretch material, reinforcements, ventilation and reflective material as the jacket, plus chainsaw protection. Unique pre-bent knees and ventilation zippers at the backs of the legs. The extended back design provides added coverage.

5781661-46 Small (170cm - 176cm)

5781661-50 Medium (176cm - 182cm)

5781661-54 Large (176cm - 182cm)

5781661-58 X-Large (182cm - 188cm)

5781661-62 XX-Large (188cm - 194cm)

CLASSIC JACKETBoasts a clean and modern design with quality in the details. The high-viz orange fabric at the top and large reflective logo prints, provides increased visibility. The jacket features buttons at the end of the arms to provide a tight and secure fit, a chest pocket and two side pockets.

5781653-46 Small (92cm - 100cm)

5850607-50 Medium (100cm - 108cm)

5850607-54 Large (108cm - 116cm)

5781653-58 X-Large (116cm - 124cm)

5781653-62 XX-Large (124cm - 128cm)

CLASSIC TROUSERSClean, modern design trousers with chainsaw protection. The classic trousers feature a comfortable, elastic waist design with front pockets, one back pocket and a convenient ventilation zipper at the back of the legs for user comfort.

5781654-46 Small (170cm - 176cm)

5781654-50 Medium (176cm - 182cm)

5781654-54 Large (176cm - 182cm)

5781654-58 X-Large (182cm - 188cm)

5781654-62 XX-Large (188cm - 194cm)

TECHNICAL GLOVES WITH SAW PROTECTIONA Technical glove with chainsaw protection 20m/s. Goat leather palm with interlock jersey and grey foam and laminated spandex fabric on back. Made with comfortable seams that follow the hand shape and with double thumb stitching. Meets the requirements of EN 381-7, Class 1, 20 m/s and EN 388 mechanical hazards CAT II.

5793810-08 Size 8

5793810-09 Size 9

5793810-10 Size 10

FUNCTIONAL GLOVES WITH SAW PROTECTION A comfortable saw protection glove made with a goat leather double palm with foam laminated spandex on the back and with nylon neoprene knuckles. Goat leather has a good protection against moisture since it contains natural fat and is therefore suitable for demanding jobs. Knitted wrist makes it easy to put on and gives a soft comfort. Meets requirements of EN 381-7, Class 0, 16 m/s and EN 388 mechanical hazards CATII.

5793802-07 Size 7

5793802-08 Size 8

5793802-09 Size 9

5793802-10 Size 10

5793802-12 Size 12

GLOVES - CLASSIC LIGHT A slim fit and comfortable glove made with a goat leather palm with jersey fabric on the back. Goat leather has a good protection against moisture since it contains natural fat and is therefore suitable for demanding jobs.

5793800-06 Size 6

5793800-08 Size 8

5793800-09 Size 9

5793800-10 Size 10

HUSQVARNA PRO CHAPS New style Husqvarna Pro Chainsaw Chaps feature a lightweight, breathable poly-cotton outer shell material with fully adjustable clip style leg straps and a velcro-attached fabric layer on the rear lower leg to offer debris and snagging protection. Fully certified to AS/NZS 4453:1997

5769241-46 Small

5769241-50 Medium

5769241-54 Large

LIFESTYLE CHAPSChainsaw chaps for the occasional chainsaw user. They feature heavy duty nylon outer fabric, with adjustable clips on the upper leg and zip closure on the lower leg to ensure a secure fit. Certified to AS/NZS 4453-3:1997.

LENGTH (WAIST TO BOTTOM OF CHAP)

5292841-01 Small 90cm

5292842-01 Medium 95cm

5292843-01 Large 100cm

FIRE RETARDANT CHAPSSuitable for Government, Utility and Emergency Services chainsaw users, Husqvarna’s Fire-retardant Chainsaw Chaps offer increased protection from thermal and electrical hazards, and comply with Australian and New Zealand occupational health standards.

5748419-03 Small

5748419-02 Medium

5748419-01 Large

BRACES Extra wide, adjustable length braces.

5056185-00 Braces with Metallic Clips

5056185-10 Replacement braces for Technical Extreme Trousers. Also suits Technical and Classic Trouser range.

REPLACEMENT BUCKLES FOR PRO CHAPS

5806080-01 20mm Male

5806081-01 20mm Female

5806078-01 50mm Male

5806079-01 50mm Female

CLASSIC GLOVES A one size durable glove made with a goat leather palm and spandex fabric on the back. Goat leather offers good protection against moisture since it contains natural fat and is therefore suitable for demanding jobs. Rubberised cuff with cotton binding for a perfect fit around the wrist.

5793799-10 Size 10

HUSQVARNA BATTERY BAGInsulating, splash water-proof and shock-absorbing bag for Husqvarna BLi batteries (BLi 80/150). Features a thermo coating which keeps the appropriate operating temperature of the battery even under very cold or hot climate conditions. Easy to carry with both belt-loop or hook for arborists.

5853718-01 Battery Bag Suits BLi80 & BLI150 batteries

HUSQVARNA BATTERY BOX-SMALLBox for the safe transport and storage of Husqvarna batteries, chargers and other accessories. Fully compatible with the Systainer-Box-System

5854287-01 Battery Box-S (160x300x400mm) Suits BLi80 & BLi150 batteries.

HUSQVARNA BATTERY BOX-LARGEBox for safe transport and storage of Husqvarna backpack batteries, batteries, chargers and other accessories. The box is compatible with the Systainer-Box-System.

5854288-01 Battery Box-L (210x500x300mm) Suits BLi80, BLi150, BLi520X & BLI940X batteries.

NEW! NEW! NEW!

SAFETY FOOTWEARSAFETY HELMETS, HEARING & EYE PROTECTIONSAFETY FOOTWEAR | 1514 | SAFETY HELMETS, HEARING & EYE PROTECTION

PROTECTIVE BOOTS- FUNCTIONAL 24 Features a reinforced toe-cap, ankle protection and approved saw protection. The non-slip sole is prepared for studs, while the ridge on the heel makes it easier to remove boot. Weight 2.5kg/pair. Meets requirements of EN 345 SB E, EN 381-3 class 2, 24 m/s.

PROTECTIVE BOOTS - TECHNICAL Highly comfortable protective boot made with composite toe cap which keeps the boot low in weight. Made of nylon mesh and high quality leather Sympatex® membrane material that makes the boot comfortable all day and 100% waterproof.

The Gravity® sole is oil resistant and gives it perfect grip. These boots are suitable for forest and garden work as well as leisure, in all weather conditions. The front part of the boot is reinforced with extra rubber protection. Certified to EN ISO 20345. Weight 1.5kg pair.

AUTOMOWER® HOUSEProtects the charging station and Automower® from the exposure of sun and rain.

5850194-01 Automower® House

WHEEL BRUSH KITKeeps the driving wheels clean to maintain good traction. Kit includes: 6 x brushes, 2 x holders and 2 x screws.

5051327-01 Wheel Brush Kit

SIGNAL BOOSTERIncreases the signal strength to a sufficient level in long loop wire installations.

5224258-01 Signal Booster

PREMIUM EARMUFF Design allows 20% adjustment of pressure. Lightweight, flexible padded headband. Meets requirements of EN 352-1.

5056653-04 Premium Earmuff w. Headband - old

5056653-25 Premium Earmuff (Pair) - suits Helmet Type 1 - Arborist

5790356-01 Premium Earmuff with adaptor - suits Helmet Type 2 - Forest

PREMIUM EARMUFF WITH PERSPEX OR MESH VISOR Protection for grass clearing and other tasks. Cover between visor and headband which prevents grass, chips and rain from entering from above. Complete as shown. Can also be fitted with a sun peak. Meets requirements of EN 352-1, EN 166 and EN 1731.

5056653-48 Premium Earmuff w. Plexi Visor

5056653-58 Premium Earmuff w. Mesh Visor

5056653-80 Visor Holder (Premium Earmuff)

5056653-42 Visor Clips-L+R (Premium Earmuff)

5056653-81 Protection Cap (Premium Earmuff) w. adaptor for Helmet Type 2

FM RADIO EARMUFF WITH AUX JACK NEW hearing protection with FM radio. The headband design centralises the pressure on the headband, reducing the pressure on the ears. It has improved attenuation and sound quality. The ear muffs are individually designed for the left and right ear, meaning that they follow the shape of the head, giving a perfect fit for all users. Features Audio input 3.5mm (AUX) for mp3 or communication radio. Noise reduction - SNR - 27dB(A). Meets requirements of EN352-3:2002, EN352-6:2002 and EN352-8:2008.

5782749-01 FM Radio Earmuff

5784023-01 Hygiene Kit for FM Radio Earmuff

‘X’ SERIES PROTECTIVE GLASSES Protective glasses with scratch resistant lenses. Frames can be extended and lenses can be angled. Available in Clear, Grey tint, and Yellow tint. Meets requirements of EN 166, ANSI Z87+

5449637-01 Protective Glasses - Clear ‘X’

5449637-02 Protective Glasses - Yellow ‘X’

5449637-03 Protective Glasses - Sun ‘X’

PRO SAFETY GOGGLES WITH ANTI-FOG LENS Developed for people who wear eyeglasses. Featuring non-scratch anti-fog lenses and soft inside for greater comfort. Meets requirements of EN 166.

5449639-01 Pro Safety Goggles (Anti-Fog Lens)

ARBORIST HELMET KITLightweight and ventilated helmet for professional arborists, approved for work at heights. Unique harness adjustment with two wheels that centers the head in the helmet for best balance and stability on the head. Only for work at height - Not approved for forestry work on the ground! Certified to EN12492, ANSI Z89.1-2009 Class C.

5780923-01 Aborist Helmet Kit (incl. Helmet, Earmuff, Mesh Visor)

FOREST HELMET KIT Polycarbonate helmet, made in Australia, and supplied with hearing protection, sun peak and neck guard. Also includes UltraVision visor - which offers a 20% light reduction giving a clearer view. Certified to AS/NZS 1801:1997,Type 2

5792440-01 Helmet Assembly (Helmet, Earmuff & Mesh Visor)

5802544-01 Helmet Assembly (6pk)

5792441-01 Polycarbonate Helmet only

EARMUFF AND HELMET SPARES

5746135-01 Ultra Vision Visor (NEW)

5056653-21 Mesh Visor-Aluminium

5056653-19 Mesh Visor-Nylon

5056653-43 Visor-Perspex

5056653-28 Visor Holder Assembly - Helmet

5056653-26 Hygiene Kit - Earmuff

5056653-91 Hygiene Kit - FM Earmuff (old model)

5056653-31 Sweatpad - Earmuff

5755576-02 Helmet Harness - Plastic Type 1 Helmet

5792442-01 6 point Terylene Harness for Type 2 Helmet

5056653-06 Neck Protector - Helmet

5781798-01 Sun Peak For Helmet Complete

5755573-01 Sweat Band - Type 1 Helmet

5792443-01 Replacement Sweat Band - Type 2 Helmet

5056653-95 Chin Strap - 11154 (Type 1 Helmet)

5854834-01 Chin Strap (Type 2 Helmet)

GARDEN EARMUFF Extra wide headband for secure, comfortable fit and less pressure on the head. The protectors are made of impact- resistant ABS plastic. Meets requirements of EN 352-1 and EN 166. Weight 218g.

5101995-01 Garden Earmuff

5056990-12 Garden Earmuff (Ctn 10)

GARDEN EARMUFF WITH PERSPEX OR MESH VISOR Garden earmuff complete with visor holder and perspex or mesh visor. Meets requirements of EN 352-1 and EN 166.

5056653-60 Garden Earmuff w. Perspex Visor

5056653-61 Garden Earmuff w. Mesh Visor

EU sizeUK / US size

5753547-36 UK 3.5 / US 4.5 36

5753547-37 UK 4 / US 5 37

5753547-38 UK 5 / US 6 38

5753547-39 UK 5.5 / US 6.5 39

5753547-40 UK 6.5 / US 7.5 40

5753547-41 UK 7.5 / US 8.5 41

5753547-42 UK 8 / US 9 42

5753547-43 UK 9 / US 10 43

5753547-44 UK 9.5 / US 10.5 44

5753547-45 UK 10.5 / US 11.5 45

5753547-46 UK 11 / US 12 46

5753547-47 UK 12 / US 13 47

BOOT STUDSStuds, including stud key, to suit protective boots. Functional 24.

5872581-01 Boot Studs, including stud key (50 pcs / package)

5739558-37 Size 4 37

5739558-38 Size 5 38

5739558-39 Size 5 1/2 39

5739558-40 Size 6 1/2 40

5739558-41 Size 7 1/2 41

5739558-42 Size 8 42

5739558-43 Size 9 43

5739558-44 Size 9 1/2 44

5739558-45 Size 10 1/2 4

5739558-46 Size 11 4

5739558-47 Size 12 47

EU size

AUTOMOWER® ACCESSORIES

SOFT CARRY BAGA special carry bag, making it easy to transport the Automower® between lawns.

5056999-91 Soft Carry Bag

WHEELED ACCESSORIES | 1716 | WHEELED ACCESSORIES

WHEELED ACCESSORIES

HYDRAULIC KITKit necessary for adaption of front-mounted attachments with hydraulic function.

9667545-01 Hydraulic Kit - P525D

FLAIL MOWERRobust, reliable flail mower for rough areas with overgrown grass and low brushwood. Hard-wearing mitre gear for maximum product life. Suits models R422TSAWD, P524.

9667965-01 Flail Mower - Cutting width 100cm.

BRUSHRotating brush attachment for professional Riders. Adjustable support wheels. Suits models R422TSAWD, P524.

9667963-01 Working width 114-120cm.

UTILITY BUCKETPractical utility bucket in welded high-tensile steel. Hydraulic adjustment of angling and emptying. Requires hydraulic kit and counter weight.

9659974-01 Utility Bucket - P525D

COUNTER WEIGHTRear counterweight, must be used when operating front-mounted attachments. Total weight 62kg. Suits model P525D.

9667549-01 Counter weight

FLAIL MOWERProductive and robust flail mower for rough areas with overgrown grass and brushwood. Shaft driven with bevel gear. Requires counter weight. Suits model P525D.

9670243-01 Flail mower - P525D

SWEEPER/COLLECTORFor Riders. A spacious, handy collector that is easily emptied from the driver’s seat. Adjustable height setting. Working width 42”/107cm.

5866365-01 Sweeper/Collector

AERATOREfficient tow-behind aerator. Productivity 2.9 acres/hr. Weight units sold separately. Suits models R422TSAWD.

5400000-73 Aerator - 36” Width

9689992-36 Aerator - 48” Width

BRUSHRotating brush attachment for model P525D. Shaft driven with bevel gear and chain drive. Two rear solid support wheels for ground following. Requires hydraulic kit. Suits model P525D.

9667544-01 Working Width 121.5 - 130cm

SPREADERTow-behind spreaders with various spreading widths (Spreader 30 =1.8M - 3.0 M ; Spreader 75 = 3.0m - 3.7M ) and various weight capacities.

954 12 00-46 Spreader 30

967 02 72-01 Spreader 75

COVER Full size covers made in water resistant nylon.

5056308-70 Rider Cover (S) - Suits 100 series

5049813-82 Rider Cover (L) - Suits 400 series

5056308-82 Tractor Cover (L) - Suits YT/GT/CT

BIOCLIP® / MULCHING KITConverts standard cutting deck to BioClip® (mulching). Suits selected lawn tractors and zero turns.

Ask instore for fit up options & ordering details

COMBI CARTUse as either a wheelbarrow or a tow-behind trailer.

5872799-01 Combi Cart

TRACTOR SCOOPConvenient scoop recommended for transporting small / lightweight items, such as bark or leaves.

5762173-01 Tractor Scoop - YT/GT models

TRACTOR BLADEEfficient 48” blade recommended for clearing gravel and debris from paths.

5762174-01 Tractor Blade - GT models only.

DEFLECTORConverts integrated collection tractor models to rear ejection function.

9607100-40 Deflector - CTH2642TRE

9607100-42 Deflector - CTH2138R/CTH2642TR

9541200-91 Deflector - TC328 / TC342

COLLECTORSA range of spacious collectors available, with two or three bin compartments. Capacity - 210 L or 315 L.

Ask instore for fit up options and ordering details.

BATTERY CHARGER BC0.8For all 12V lead-acid batteries from 1.2 - 32Ah. Suitable for maintenance charging up to 100Ah. Fully automatic and maximises battery life and performance. No sparks, short-circuit proof and reverse-polarity protected for untroubled usage.

5794501-02 Battery Charger

BATTERY STATUS INDICATORA practical quick connector for those with batteries that are difficult to access or are hidden. The eyelet terminals are fitted to the battery, giving effortless connection without the need of actually reaching the battery. Fits Husqvarna Battery charger XS 800 (new connection) and BC 0.8

5794521-01 Battery status indicator

SEAT COVERWater resistant fabric, cushioned for extra comfort, with rear storage pockets for tools and gear. Protects the seat against weather and UV damage. Suits all homeowner/landowner ride-on mowers.

5313082-28 Seat Cover

FLAIL MOWERRobust, reliable flail mower for rough areas with overgrown grass and low brushwood. Suits model R322TAWD.

9664161-01 Flail Mower - Cutting width 90cm

BRUSHRotating brush for sweeping up leaves, snow, and debris. Can be angled to either side. Suits model R322TAWD.

9670086-01 Working width 90 - 95cm

LOADING RAMPSCurved loading ramps made of sea water resistant aluminium with slip resistant surface for a secure grip. Well suited for use on trailers with a height up to 700 mm, and for a maximum total load of 450 kg/pair.

5056990-43 Loading Ramps - sold in pairs

ROPS SYSTEMROPS to reduce the risk of accidents in case the mower should roll. Mounted directly to the chassis. Safety belt included. Suits selected Zero Turns and P525D. Ask in store for fit up options and ordering details.

ROAD KITComplete road kit designed for safe transport on public roads to and from work sites. Kit includes control box, rotating beacon light, position and touring lights (front and rear) and number plate light kit.

5853187-01 Road Kit - P525D

TECHNICAL SPECIFICATIONS GLOSSARYTECHNICAL SPECIFICATIONS GLOSSARY | 1918 | TECHNICAL SPECIFICATIONS GLOSSARY

HUSQVARNA – SAW CHAIN

PITCH GAUGEHUSQVARNA

CHAIN PART NO.

MODEL NO.

COMMERCIAL REF. NO.

SIZECUTTER

TYPE

OTHER CHAIN TYPESFILE SIZE

OREGON WINDSOR CARLTON STIHL

1/4" .050"

5018440-58

H00

H00-58DL 10"Micro-

Chisel®25AP 50K E1MC-BL 13RM 5/32"5018440-64 H00-64DL 12"

5033054-01 H00-100R 100ft

.325" Pixel

.050"

5018406-64

H30X

H30-64DL 15"

Micro-Chisel®

95VPX 50JSG K1NK-BL – 3/16"

5018406-66 H30-66DL 16"

5018406-72 H30-72DL 18"

5033058-01 H30-100R 100ft

5033058-25 H30-25R 25ft

.325"

.050"

5033067-01H22X

H22-100R 100ft Micro-Chisel®

20BPX 50JG K1C-BL 23RMC 3/16"5033067-25 H22-25R 25ft

5033091-01H23X

H23-100R 100ftChisel 20LPX 50JLG K1L-BL 23RS 3/16"

5033091-25 H23-25R 25ft

.058"

5018404-64

H25X

H25-64DL 15"

Micro-Chisel®

21BPX 58JG K2C-BL 25RMC 3/16"

5018404-66 H25-66DL 16"

5018404-72 H25-72DL 18"

5018404-80 H25-80DL 20"

5033055-01 H25-100R 100ft

5033055-25 H25-25R 25ft

5033057-01H21X


5033057-25 H21-25R 25ft

.063"

5033003-62

H28X

H28-62DL 16"

Micro-Chisel®

22BPX 63JG K3C-BL 26RMC 3/16"5033003-68 H28-68DL 18"

5033003-22 H28-100R 100ft

5033003-25 H28-25R 25ft

5033073-01H26X


5033073-25 H26-25R 25ft

3/8" LP

.043"

581807940

H38

H38-40DL 10”

Chamfer Chisel™

90SG 43RG N4C-BL 61PMM3 4.5mm

581807945 H38-45DL 12”

581807952 H38-52DL 14”

5818079-01 H38-100R 100ft

5818079-25 H38-25R 25ft

.050"

5018470-52

H35X

H35-52DL 14"

Semi Chisel 91VXL 50R N1C 63PM 5/32"5018470-56 H35-56DL 16"

5033069-01 H35-100R 100ft

5033069-25 H35-25R 25ft

5033068-25 H36 H36-25R 25ftChamfer Chisel™

91VG 50RG N1C-BL 63PMC3 5/32”

5769365-45

H37

H37-45DL 12"

Chamfer Chisel™

91PX 50RG N1C-BL 63PMC3 5/32"

5769365-52 H37-52DL 14"

5769365-56 H37-56DL 16"

5769365-01 H37-100R 100ft

5769365-25 H37-25R 25ft


CHAIN PART NO.

MODEL NO.

COMMERCIAL REF. NO.

SIZECUTTER

TYPE

OTHER CHAIN TYPESFILE SIZE

OREGON WINDSOR CARLTON STIHL

3/8"

.050"

5033033-22H51

H51-100R 100ftSemi Chisel 72DP 50AG A1EP-BL 33RM1 7/32"

5033033-25 H51-25R 25ft

5033079-01H47X

H47-100R 100ft

Chisel

72LGX 50APL A1LM 33RS 7/32"5033079-25 H47-25R 25ft

5033078-01H46X

H46-100R 100ft72LPX 50APLG A1LM-BL 33RS1 7/32"

5033078-25 H46-25R 25ft

0.58"

5440788-68

H54

H54-68DL 18"

Semi Chisel 73DP 58AG A2EP-BL 35RM1 7/32"

5440788-72 H54-72DL 20"

5440788-76 H54-76DL 22"

5440788-84 H54-84DL 24"

5033050-01 H54-100R 100ft

5033050-25 H54-25R 25ft

5033081-01H48X

H48-100R 100ft

Chisel 73LGX 58APL A2LM 35RS 7/32"

5033081-25 H48-25R 25ft

5018414-72

H42X

H42-72DL 20"

5018414-76 H42-76DL 22"

5018414-84 H42-84DL 24"

5018414-92 H42-92DL 28"

5033060-01 H42-100R 100ft

5033060-25 H42-25R 25ft

5033052-22 H52 H52-100R 100ftSemi Chisel-

Ripping73RD – A2EP-RP – 7/32"

0.63"

5019824-01H50X

H50-100R 100ftChisel 75LGX 63APL A3LM 36RS 7/32"

5019824-25 H50-25R 25ft

5033088-01 H45X H45-100R 100ft Chisel 75LPX 63APLG A3LM-BL 36RS1 7/32"

5228745-72

H58

H58-72DL 20"

Semi Chisel 75DP 63AG A3EP-BL 36RM1 7/32"5228745-01 H58-100R 100ft

5228745-25 H58-25R 25ft

.404"

.058" 5440760-01 H56S H56S-100R 100ft Chisel-Skip 58J – B2LM-SK – 7/32"

.063"

5033064-01H64

H64-100R 100ft Micro-Chisel®

27 63B B3RM35 46RM 7/32"5033064-25 H64-25R 25ft

5033065-01 H66 H66-100R 100ft Micro-Bit® 59AC 7/32"

5018434-65

H57

H57-65DL 20"

Chisel 59L 63BL B3EP 46RS 7/32”

5018434-76 H57-76DL 24"

5100941-01 H57-84DL 28"

5018434-95 H57-95DL 32”

5018434-04 H57-104DL 36"

5100943-01 H57-122DL 42"

5033077-01 H57-100R 100ft

5033077-25 H57-25R 25ft

5033066-01 H65 H65-100R 100ftSemi Chisel

- Ripping27R 63BR B3RM10 46RCX 7/32"

TECHNICAL SPECIFICATIONS GLOSSARY | 2120 | TECHNICAL SPECIFICATIONS GLOSSARY

TIE STRAPS - PKT 25

PART NO. HUSQVARNA CHAIN TYPE

5040662-01 H00

5018478-05 H35,36,37

5018477-07 H30

5018478-04H42,46,47,48,51,52,54

H45,50,58

5018477-03H21,22,23,25

H26,28

5018479-02 H56S,57,58S,64,64S,65,66

PRESET TIE STRAPS - PKT 25

PART NO. HUSQVARNA CHAIN TYPE

5040670-01 H00

5018481-05 H35,36,37

5018480-08 H30

5018481-04 H42,46,47,48,51,52,54

5040670-03 H45,50,58

5018480-05 H21,22,23,25

5040670-04 H26,28

5018482-02 H56S,57,58S,64,64S,65,66

OREGON CHAIN TYPE

25

91

95

72/73

75

20/21

22

26/27/57/58/59

HUSQVARNA CHAIN PARTS

CHAIN PITCH 1/4” .325” 3/8” LP 3/8” .404”

Drive Links - 25’ Reel 600 464 412 412 372

Drive Links - 100’ Reel 2392 1848 1640 1640 1484

CHAIN REELS – DRIVE LINK COUNT


PART NO.BAR LENGTH

DRIVE LINKS CHAIN TYPEOREGON

EQUIVALENTINCHES CM

Solid Bars with Replaceable Nose

.325" .058"5024400-72 18" 45cm 72 H21,25 188RNBK095

6080000-09 20" 50cm 78 H21,25 208RNBK095

3/8"

.050" 6080000-46 20" 50cm 72 H46,47,51 200RNDD009

.058"

6080000-17 16" 40cm 60 H42,48,54 168RNDK095

5019577-68 18" 45cm 68 H42,48,54 188RNDK095

5019577-72 20" 50cm 72 H42,48,54 208RNDK095

5019569-60 16" 40cm 60 H42,48,54 168RNDD009

5019569-68 18" 45cm 68 H42,48,54 188RNDD009

5019569-72 20" 50cm 72 H42,48,54 208RNDD009

5019569-76 22" 55cm 76 H42,48,54 228RNDD009

5019569-84 24" 60cm 84 H42,48,54 248RNDD009

5019569-92 28" 70cm 92 H42,48,54 288RNDD009

6080000-54 32" 81cm 105 H42,48,54 328RNDD009

.063"

5024396-72 20" 50cm 72 H45,50,58 203RNDD009

6080000-55 32" 81cm 105 H45,50,58 323RNDD009

5024396-15 36" 90cm 115 H45,50,58 363RNDD009

.404" .063"

5020773-65 20" 50cm 65 H57,64 203RNFD009

5020773-76 24" 60cm 76 H57,64 243RNFD009

5020773-84 28" 70cm 84 H57,64 283RNFD009

6080000-62 32" 81cm 95 H57,64 323RNFD009

6080000-63 36" 90cm 104 H57,64 363RNFD009

5020773-22 42" 107cm 122 H57,64 423RNFD009

Laser Tip Solid Nose Bars

.058"

5019580-68 18" 45cm 68 H42,48,54 188ATMD009

5019580-72 20" 50cm 72 H42,48,54 208ATMD009

5019580-84 24" 60cm 84 H42,48,54 248ATMD009

5019580-92 28" 70cm 92 H42,48,54 288ATMD009

.063" 5015896-01 28" 70cm 84 H45,50,58 283ATMD009

HUSQVARNA SOLID GUIDE BARS

PART NO. DESCRIPTION PART NO. DESCRIPTION

RSN Guide Bars – Replaceable Nose Laminated Guide Bars – Sprocket Noses

5019575-01 3/8”-11T 5018510-05 .325” -.050” (10T)

5048897-01 .325"-12T 5018510-01 .325” - .058” (10T)

5019588-01 .404"-10T 5019594-01 .325” - .058” (12T)

– – 5019572-01 .325” - .063” (10T)

– – 5018510-02 3/8” - .058” (10T)

– – 5019574-01 3/8” - .058” (11T)


PART NO.

BAR LENGTHDRIVE LINKS CHAIN TYPE

OREGON EQUIVALENT

INCHES CM

Special Bars (suit PS250) 3/8” .043" 5024052-01 6" 15cm 32 H38 –

Special Bars (suit 327PT5S)

1/4" .050"5758422-58 10” 25cm 58 H00 –

5758422-64 12" 30cm 64 H00 –

Narrow Kerf Laminated Sprocket Nose Bars

3/8” .043"

5019595-40 10” 25cm 40 H38 104MLEA041

5019595-45 12” 30cm 45 H38 124MLEA041

5019595-52 14” 35cm 52 H38 144MLEA041

Consumer Sprocket Nose Bars

3/8” .050"

5019592-40 10” 25cm 40 H35,36 100SDEA095

5019592-45 12" 30cm 45 H35,36 120SDEA095

5019592-52 14" 35cm 52 H35,36 140SDEA095

5019592-56 16" 40cm 56 H35,36 160SDEA095

Consumer Sprocket Nose Side-tensioning Bars

3/8” .050"

5019596-45 12" 30cm 45 H35,36 120SDET095

5019596-52 14" 35cm 52 H35,36 140SDET095

5019596-56 16" 40cm 56 H35,36 160SDET095

TechLite™ Laminated Sprocket Nose Bars

3/8” .050"

5768307-45 12" 30cm 45 H35,37 120SDEA095

5768307-52 14" 35cm 52 H35,37 140SDEA095

5768307-56 16" 40cm 56 H35,37 160SDEA095

Pro-Laminated Sprocket Nose Bars

.325" .058"

5089121-56 13" 33cm 56 H21,25 138SLBK095

5089121-64 15" 38cm 64 H21,25 158SLBK095

5089121-66 16" 40cm 66 H21,25 168SLGK095

5089121-72 18" 45cm 72 H21,25 188SLGK095

5089121-80 20" 50cm 80 H21,25 208SLGK095

3/8" .058"

5089141-56 15" 38cm 56 H42,48,54 158SLHK095

5089141-60 16" 40cm 60 H21,25 168SLHK095

5089141-68 18" 45cm 68 H42,48,54 188SLHK095

5101535-72 20" 50cm 72 H42,48,54 208SLHK095

5089131-56 15" 38cm 56 H42,48,54 158SLHD009

5089131-60 16" 40cm 60 H21,25 168SLHD009

5089131-68 18" 45cm 68 H42,48,54 188SLHD009

5442855-72 20" 50cm 72 H42,48,54 208SLHD009

Narrow Kerf Pro-Laminated Sprocket Nose Bars

.325" .050"

5089261-56 13" 33cm 56 H30 130MPBK095

5089261-64 15" 38cm 64 H30 150MPBK095

5089261-66 16" 40cm 66 H30 160MPBK095

5089261-72 18" 45cm 72 H30 180MPBK095

5089261-80 20" 50cm 80 H30 200MPBK095

HUSQVARNA LAMINATED BARS

GUIDE BAR SPARES


SOLID BAR & CHAIN FIT-UP GUIDELAMINATED BAR & CHAIN FIT-UP GUIDE

327P

T5S

136L

i / T

536L

iXP

536L

iXP

T435

/ 3

34T

338X

PT

T540

XP

236

/ 23

6e

240e

/ 2

40e

Trio

/ 13

5e /

321

E

435

e

440e

II /

445

e II

/ 44

5e-T

rio

445

II /

450

II /

450e

II

346X

P /

346X

P-Tr

io /

550

XP-

Trio

550X

P

357X

P /

455R

/ 4

55R-

AT

555

-AT

460

562X

P /

556-

AT

365

/ 37

2XP

570

/ 57

5XP

/ 57

6XP

570

-AT

/ 57

6XP-

AT

390X

P /

395X

P

3120

XP

MINI BAR MOUNT (A041 / A095)

SMALL BAR MOUNT (K095)

LARGE BAR MOUNT (D009)

BAR LENGTH IN./CM.

CHAIN PITCH

IN.

GAUGE, IN./CM.

PART NO. DRIVE LINKS

CHAIN TYPE

PART NO

LAMINATED BAR WITH NOSE SPROCKET CHAINS

10/25 1/4” .050/1.3 5758422-58 58 H00 5018440-58

O 12/30 1/4” .050/1.3 5758422-64 64 H00 5018440-64

O O 10/25 3/8 LP .043/1.1 5019595-40 40 H38 5818079-40

O 12/30 3/8 LP .043/1.1 5019595-45 45 H38 5818079-45

O 14/35 3/8 LP .043/1.1 5019595-52 52 H38 5818079-52

O 12/30 3/8 LP .050/1.3 5768307-45 45 H37 LowVib 5769365-45

14/35 3/8 LP .050/1.3 5768307-52 52 H37 LowVib 5769365-52

O 16/40 3/8 LP .050/1.3 5019592-56 56 H37 LowVib 5769365-56

O O O 12/30 3/8 LP .050/1.3 5019592-45 45 H37 LowVib 5769365-45

O O 14/35 3/8 LP .050/1.3 5019592-52 52 H37 LowVib 5769365-52

O O 16/40 3/8 LP .050/1.3 5019592-56 56 H37 LowVib 5769365-56

O O O O O O O O 13/33 .325 .050/1.3 5089261-56 56 H30 LowVib 5018406-56

O O O O O O O 15/38 .325 .050/1.3 5089261-64 64 H30 LowVib 5018406-64

O O O O O O O 16/40 .325 .050/1.3 5089261-66 66 H30 LowVib 5018406-66

O O O O O O O 18/45 .325 .050/1.3 5089261-72 72 H30 LowVib 5018406-72

O O O O O 20/50 .325 .050/1.3 5089261-80 80 H30 LowVib 5018406-80

O O O O O O O 13/33 .325 .058/1.5 5089121-56 56 H25 LowVib 5018404-56

O O O O O O 15/38 .325 .058/1.5 5089121-64 64 H25 LowVib 5018404-64

O O O O O O 16/40 .325 .058/1.5 5089121-66 66 H25 LowVib 5018404-66

O O O O O O 18/45 .325 .058/1.5 5089121-72 72 H25 LowVib 5018404-72

O O * O O 20/50 .325 .058/1.5 5089121-80 80 H25 LowVib 5018404-80

O O O 15/38 3/8 .058/1.5 5089141-56 56 H42 LowVib 5018414-56

O O O 16/40 3/8 .058/1.5 5089141-60 60 H42 LowVib 5018414-60

O O 18/45 3/8 .058/1.5 5089141-68 68 H42 LowVib 5018414-68

O O O 20/50 3/8 .058/1.5 5101535-72 72 H42 LowVib 5018414-72

O O O 15/38 3/8 .058/1.5 5089131-56 56 H42 LowVib 5018414-56

O O O 16/40 3/8 .058/1.5 5089131-60 60 H42 LowVib 5018414-60

O O O O O 18/45 3/8 .058/1.5 5089131-68 68 H42 LowVib 5018414-68

O O O O O 20/50 3/8 .058/1.5 5442855-72 72 H42 LowVib 5018414-72

= Standard Cutting Equipment * = 455R-AT with 20” Laminated Bar from late 2015

O = Optional Cutting Equipment

327P

T5S

136L

i / T

536L

iXP

536L

iXP

T435

/ 3

34T

338X

PT

T540

XP

236

/ 23

6e

240e

/ 2

40e

Trio

/ 13

5e /

321

E

435

e

440e

II /

445

e II

/ 44

5e-T

rio

445

II /

450

II /

450e

II

346X

P /

346X

P-Tr

io /

550

XP

Trio

550X

P

357X

P /

455R

/ 4

55R-

AT

555

-AT

460

562X

P /

556-

AT

365

/ 37

2XP

570

/ 57

5XP

/ 57

6XP

570

-AT

/ 57

6XP-

AT

390X

P /

395X

P

3120

XP

MINI BAR MOUNT (A041 / A095)

SMALL BAR MOUNT (K095) LARGE BAR MOUNT (D009)

BAR LENGTH IN./CM.

CHAIN PITCH

IN.

GAUGE, IN./CM.

PART NO. DRIVE LINKS

CHAIN TYPE PART NO

SOLID BAR WITH REPLACEABLE BAR NOSE CHAINS

O O O O O O O 18/45 .325 .058/1.5 502 44 00-72 72 H25 LowVib 501 84 04-72

O O O O O 20/50 .325 .058/1.5 608 00 00-09 80 H25 LowVib 501 84 04-80

O O O 16/40 3/8 .058/1.5 608 00 00-17 60 H42 LowVib 501 84 14-60

O O O 18/45 3/8 .058/1.5 501 95 77-68 68 H42 LowVib 501 84 14-68

O O 20/50 3/8 .058/1.5 501 95 77-72 72 H42 LowVib 501 84 14-72

O O O O 16/40 3/8 .058/1.5 501 95 69-60 60 H42 LowVib 501 84 14-60

O O O O 18/45 3/8 .058/1.5 501 95 69-68 68 H42 LowVib 501 84 14-68

O O O O O O 20/50 3/8 .050/1.3 608 00 00-46 72 H46 LowVib 501 84 25-72

O O 20/50 3/8 .058/1.5 501 95 69-72 72 H42 LowVib 501 84 14-72

O O O O O O 22/55 3/8 .058/1.5 501 95 69-76 76 H42 LowVib 501 84 14-76

O O O O O 24/60 3/8 .058/1.5 501 95 69-84 84 H42 LowVib 501 84 14-84

O O O 28/70 3/8 .058/1.5 501 95 69-92 92 H42 LowVib 501 84 14-92

O O 32/81 3/8 .058/1.5 608 00 00-54 105 H42 LowVib 501 84 14-05

O O 32/81 3/8 .063/1.6 608 00 00-55 105 H45 LowVib 588 41 22-01

O O 32/81 .404 .063/1.6 608 00 00-62 95 H57 501 84 34-95

O O 36/90 3/8 .063/1.6 502 43 96-15 115 H45 LowVib 588 41 22-02

O O O 20/50 .404 .063/1.6 502 07 73-65 65 H57 501 84 34-65

O O O 24/60 .404 .063/1.6 502 07 73-76 76 H57 501 84 34-76

O 28/70 .404 .063/1.6 502 07 73-84 84 H57 510 09 41-01

O O 36/90 .404 .063/1.6 608 00 00-63 104 H57 501 84 34-04

O O 42/107 .404 .063/1.6 502 07 73-22 122 H57 510 09 43-01

LASER TIP SOLID BAR CHAINS

O O O 18/45 3/8 .058/1.5 5019580-68 68 H42 LowVib 501 84 14-68

O O O 20/50 3/8 .058/1.5 5019580-72 72 H42 LowVib 501 84 14-72

O O O 24/60 3/8 .058/1.5 5019580-84 84 H42 LowVib 501 84 14-84

O O O 28/70 3/8 .058/1.5 5019580-92 92 H42 LowVib 501 84 14-92

O O 28/70 .404 .063/1.6 5015896-01 84 H57 510 09 41-01

= Standard Cutting Equipment O = Optional Cutting Equipment


HUSQVARNA CHAIN TYPE

FILE DIAMETER INCH / MM

FILE PART NO.

FILE KIT PART NO.

ROLLER GUIDE PART NO.

COMBINATION GUIDE PART NO.

DEPTH GAUGE PART NO.

H00 5/32” / 4.0mm5100957-01 5100957-02

5806875-01 5056981-18 5806874-01 –

H35, 36 5/32” / 4.0mm5100957-01 5100957-02

5056981-38 5052437-01 – 5056981-03

H37 5/32” / 4.0mm5100955-01 5100955-02

5796536-01 5052437-01 – 5056981-03

H38 4.5mm 5772337-01 – 5795588-01 – 5056981-03

H30 3/16” / 4.8mm5100955-01 5100955-02

5056981-27 – 5056981-08 5056981-00

H21, 22, 23, 25, 26, 28 3/16” / 4.8mm5100955-01 5100955-02

5056981-25 5056981-10 5056981-09 5056981-00

H42, 45, 46, 47, 48, 50, 52 7/32” / 5.5mm5100956-01 5100956-02

5056981-30 – 5052435-01 5056981-01

H51, 54, 58 7/32” / 5.5mm5100956-01 5100956-02

– 5759915-01 – 5056981-01

H56S, 57, 58S, 64, 64S, 65, 66 7/32” / 5.5mm5100956-01 5100956-02

5056981-92 5056981-15 – 5056981-02

FILING EQUIPMENT GUIDE

GUARD APPLICATION GUIDE

TRIMMER, BRUSHCUTTER & CLEARING SAW MODELS 12

2C

124L

/ 12

5L

125L

D /

128L

D 12

2LD

125R

/ 12

8R

233R

J

323L

/ 3

26LS

32

7LS

524L

/ 5

25LS

T 52

5RJD

324L

D /

325L

D 32

7LD

335L

S /

535L

S 53

5RJ

324R

X /

325

RX

327R

X /

525

RS

135R

/ 3

33R

335R

X /

535

RX

535R

XT

343R

/ 3

45RX

345F

X /

345

FR

355F

X /

555

FX

Trimmer Guards5039771-01 S S S S1 S

5039543-01 S

5373494-03 S S

5744795-01 S

5024650-01 O

5372973-01 O O

Combi Guards5450309-01 S S

5039342-02 S S S S

5373316-01 S S

Blade Guards5372885-01 (300mm Blades) S S

5372171-01 (200mm Blades) S

5013204-02 (200mm Blades) adaptor incl. O

5745067-02 (225mm Blades) Aluminium S

5745067-02 O

5024649-01 O

5372974-01 O

Support Cups5038901-01 S S S S

5039018-02 O

5038901-02 S S

5021570-02 S

Transport Guards5373129-01 S S S S S

5022623-01 S S

S = Standard Equipment S1 = Standard Equipment with trimmer attachment O = Optional Equipment

TRIMMER HEAD & BLADE APPLICATION GUIDE

TRIMMER, BRUSHCUTTER & CLEARING SAW MODELS 13

6LIL

536L

IL /

53

6LIR

536L

ILX

/

536L

IRX

122C

/12

4C /

12

8C

124L

122L

D /

128L

D /

322L

128R

135R

/ 5

35RX

/

535R

XT

323L

326L

S /

327L

S

524L

525L

ST

324L

DX /

32

7LDX

525R

JD

335L

S /

535L

S

324R

X /

327

RX

525R

S

233R

J

535R

J

333R

/ 3

35RX

343F

R /

345F

R

355F

X /

555

FX

TRIMMER HEADS

Manual Heads

578447401 S35 - M10 O O O O O O O O O O O

578447601 S35 - M12 O O O O

575989801 Alloy Head (Fixed Line)

O O O O O O O S O O O O O O O O O

578447801 Trimmy SII M12 (Free-wheeling plate)

O O O O O O

Tap 'N Go Heads

966674401 T25 3/8" RH S

966674401 T25 M10 S S O O O O O O O O O

966674401 T25 3/8" LH S

585347901 Tap n' Go, Single Line S

579294001 T25B S S

578446301 T35 - M10 O O S O S O S O S O S

578446501 T35 X - M10 O O O S O S O S O S O

544909002 T35 - M12 S S S

578446601 T35 X - M12 O O O O O

578446801 T45 X - M12 O S O O S O

578447001 T55 X - M12 O O

Automatic Heads

531009226 Auto 55 - M12 O O O O O

TriCut Heads

578449101 Tri-cut M10 O O O O O O O O O O O

578449301 Tri-cut M12 O O O O

BLADES

Grass Blades

578444001 225-8T 1in O* O O O O O O O O O O O O

578443701 255-4T 1in S S O O S S S S O S S S S O O O

Multi Blades

578444901 255-3T 1in S O O O O O O

578444701 275-4T 1in O O O O O O

578444501 300-3T 1in O O O S S O

Shredder Blade (Suits 343FR/345FR only)

5784453-01 Shredder Blade - 1in O

Saw Blades Maxi

578443101 200-26T 1in O O O O O O O

Saw Blades Scarlett

578442501 200-22T 1in O O O O O O S S

578442601 200-22T 20mm

578442701 225-24T 1in O O O O O O O

KITS

537048501 J-handle Kit ** O ** ** ** ** **

544249601 J-handle Kit O **

544842901 Shredder Blade Kit O

* = Not applicable to 124L, 122LD, 322L O = Optional Equipment ** = J Handle Kit Components Included

S = Standard Equipment

WITH 325 YEARS OF ENGINEERING EXCELLENCE BEHIND US, HUSQVARNA IS THE BRAND YOU CAN TRUST.The strength of the Husqvarna brand has been forged by a history that goes all the way back to 1689, when Husqvarna first laid the foundation for the engineering expertise that has led us to develop world class outdoor power equipment today. Husqvarna aims to provide you total satisfaction with product performance, reliability and safety.

With this in mind, Husqvarna offers a 5 year Domestic Warranty* period when you buy genuine Husqvarna oil with your new Husqvarna product.

* Conditions apply, ask instore for full details or visit www.husqvarna.com

FOR THE LATEST NEWS,PRODUCT INFORMATION AND HELP.The Husqvarna website offers all the product information you’d expect but you’ll also find a whole lot more to help you get the perfect results for every job. There are regular campaign offers, help and advice on products as well as accessories to add versatility to your machines, in addition to an extensive range of professional clothing. Should you decide you need to speak to one of our representatives directly our dealer locators will point you in the right direction of our closest Husqvarna specialist.

Product information and instruction manuals.Here on the husqvarna.com site you can download manuals for all your Husqvarna machines as well as additional information to help you in your work.

Personalise your product search.Our latest search function allows you to narrow your search with specific information. This helps us to guide you to the best machine for the features you are looking for.

Visit our mobile sites.We want to make it as easy as possible for our customers to

receive and find information from Husqvarna. Our mobile site has been tailor-made for smartphones to help connect to

our different information channels - the website, the product catalogue and other print materials, plus our channels on

YouTube and Facebook.

Husqvarna is a registered trademark. Copyright © 2015 HUSQVARNA. All rights reserved.

Husqvarna Australia Pty Ltd. ABN 45 115 475 619Locked Bag 5, Central Coast BC, NSW, 2252 Phone: 1300 804 105 Fax: 02 4352 7499 Website: www.husqvarna.com.au

Husqvarna New Zealand Ltd. Company No. 111 861.PO Box 76-437, Manukau City, Auckland 2241 Phone: 09 920 2410 Fax: 09 920 2429 Website: www.husqvarna.co.nz

Part

Num

ber:

5017

112-0

4

Com

m R

ef: H

Q AC

CESS

CAT

2015/16 - gardening aids ltd . 137 wairau road auckland · 2020-07-19 · suits model t540xp...

Documents