2014 software global client conference - …iom.invensys.com/en/softwaregcc14presentations/technical...
TRANSCRIPT
2014 Software Global Client Conference
SS TSS-01B
New Features
in PRO/II
Part B
Highlights of updates from
PRO/II 9.2 and 9.3
Naomi Hua
2014 Software Global Client Conference
Mobile App: Please take a moment…
Check into Session by:
●Select Detailed Schedule
●Select the specific session
●Click on “Check in”
Take Session Survey by:
●Select Detailed Schedule
●Select the specific session
●Scroll Down to “Survey” and Provide Feedback
Performance
Improvements
2014 Software Global Client Conference
Sequence Improvements
PRO/II 9.2 and previous versions PRO/II 9.3
2014 Software Global Client Conference
Sequence Improvements ●Sequence tree with blocks, loops,
controllers clearly marked
●Collapse/Expand to follow easier
long sequences
●Click a unit and unit’s DEW
displays
●Search functionality
●Move units using drag and drop
●Move entire blocks of units
●Enable/Disable units/entire blocks
with a check mark
2014 Software Global Client Conference
Sequence Improvements
●Logic crosses easily identified.
● In this example user can double
click on CON and select to return
to COM to remove the cross
2014 Software Global Client Conference
Sequence Improvements
2014 Software Global Client Conference
Sequence Improvements
●When a new unit is added into a
User Sequence, the new unit is
located following the unit
supplying the input stream and
the new unit is highlighted for
easy identification
2014 Software Global Client Conference
Enable/Disable Subflowsheets ●Can enable/disable entire subflowsheets
●Ensure streams entering a block are well defined (Copy Paste
Special Total Stream Data)
2014 Software Global Client Conference
Case Study Improvements ● Support for matrix case study
● If cycle fails it is shown with an * on
the cycle number.
2014 Software Global Client Conference
Tray Properties Available through COM
●Find all the details
on tray properties
without the need
to create
pseudostreams or
re-flashing internal
streams to retrieve
data
2014 Software Global Client Conference
Copy/Paste to/from Excel for UAS Data
● From PRO/II UAS UOP Excel:
● Click on the corner of the grid to select
the entire grid
● Ctrl-C to copy, then paste into Excel
● From Excel PRO/II UAS UOP:
● Select data range only in Excel
● Copy
● Locate cursor at top left cell and paste
2014 Software Global Client Conference
Phase Envelope Updates
●Added support for additional EOS to the list of acceptable method
sets such as PPR78, BWR
●Color code phase envelope
lines 0
500
1000
1500
2000
2500
-400 -200 0 200 400 600
Pre
ssu
re,
psia
Temperature, F
Phase Envelope Curve for stream '1_1'(On Dry Basis), Description :
Full Envelope (DewPoint Curve)
Full Envelope (BubblePoint Curve)
Full Envelope (WaterDew Point Curve)
Critical Point
Cricondenbar
Cricondentherm
2014 Software Global Client Conference
Heating Curve Updates
● Evaluate HXs at 3 pressures: inlet, outlet,
and halfway in between
● Provide option to evaluate both sides of
the HX at once
● Allow attributes within a Heat Curve (such
as T&P Ranges) to be set via the "Define"
function
● Heating curve thermo selection will match
the method selected for the HXs being
evaluated
2014 Software Global Client Conference
Heat Curve Updates ● Standard heat curve generation for HXs at inlet, outlet and mid pressure isobars
2014 Software Global Client Conference
Tools Spreadsheets Updates
●Converted to *.xlsm file formats
●Reports generate faster
●Heating Curves Spreadsheet:
● Transfer all H-Curve properties to spreadsheet tools
● All Component Related Properties to be Reported when requested
● Heat curves spreadsheet in Output Units
2014 Software Global Client Conference
Tools Spreadsheet Heat Curves
●Multiple heating curve units available for selection
●Multiple streams/units available per heating curve unit for selection
2014 Software Global Client Conference
●Additionally requested properties transferred
Tools Spreadsheet Heat Curves
Unit Operation
Improvements
2014 Software Global Client Conference
Multiple Molecular Weight Compressor Curves
2014 Software Global Client Conference
Multiple Molecular Weight Compressor Curves
2014 Software Global Client Conference
Multiple Molecular Weight Compressor Curves
2014 Software Global Client Conference
CAPE-OPEN Unit Operations
●Refinery Reactors
●First company to provide
petroleum fraction
properties passed
through CAPE-OPEN
2014 Software Global Client Conference
Feed Flash Options per Feed Tray
●Multiple feed flash
options for each feed
to the column:
● On Tray: Total feed
enters onto the feed
tray
● Separate: Vapor goes
to tray above and
liquid to feed tray
2014 Software Global Client Conference
New Koch Glitsch Tower Version
●New Version: KG Tower 5.1
2014 Software Global Client Conference
Column Hydraulics: KG Packing Updates ●New packing correlations received from KochGlistch and
incorporated into PRO/II
2014 Software Global Client Conference
Calculate and Report Ideal Cp/Cv
●Not included in report by default
●Request via Stream Property Table
2014 Software Global Client Conference
Depressuring Unit Operation Updates 1. New valve mode – Orifice. Will detect if
flow is sonic or subsonic automatically
and use appropriate equations.
2. Support for dense phase calculations.
Will detect if supercritical conditions.
2014 Software Global Client Conference
Depressuring Unit Operation Updates 3. Re-order product streams
4. Create pseudo-streams corresponding to
instantaneous vent rates at specific times
5. Indicate whether flow through valve is
critical or sub-critical
2014 Software Global Client Conference
Depressuring Unit Operation Updates
6. Support for density and thickness in
vessel geometry
7. Report temperature downstream the
relief valve
2014 Software Global Client Conference
Depressuring Unit Operation Updates
8. Valve policy & user control of flow rate
and depressuring time
9. Provide an external heat input [Qexr –
UA(Text-Twall)] calculation for blowdown
10.Valve policy for User model & Orifice
model for area
11.Supply wall and liquid temperature profiles
12.Require final pressure in depressuring unit
to be exactly the specified final pressure
2014 Software Global Client Conference
Depressuring Unit Operation Updates
13.Dynamic wetted area
14.Put the maximum pressure on the
VAT so it can be used as a control
parameter
15.Null out product streams when the
step size is increased so that
fewer streams are produced
16.Liquid relief in depressuring unit
17.Document Depressurization unit
2014 Software Global Client Conference
Excel Calculator Unit Operation
● Same icon as the normal calculator
but choose ‘Use Excel Procedure’
● Define parameters, results,
constants, etc., as always
● Similar to Excel Unit operation but
more powerful
● Similar to Calculator block but no
FORTRAN coding needed for
procedure section
● Select Excel File (template available)
and edit it
2014 Software Global Client Conference
Use Excel to calculate anything you need
2014 Software Global Client Conference
Results can come just from Excel operations
2014 Software Global Client Conference
Component info is available
44 Confidential Property of Schneider Electric
Related Support, Services, Training & Expo Demos
> 1-800-SIMSCI-1 (1-800-746-7241)
Support
Training
> SimSci Training Catalog:
http://iomtraining.invensys.com/simsci/porta
l/catalog.cfm?calendarID=92#
> Filter above link by Type = Job Aids for
mini-training videos (5-10 minutes in length)
> SimSci Blog:
http://simulationots.blogspot.com/
> SimSci Experience:
http://experience.simsci.com/
Services
Expo Demos
> SS TSS 03: Simulation Thermodynamics
(Thursday, Oct 2nd 9:30 AM – 11:15 AM)
> SS TSS 04: DYNSIM 5.2 New Features.
(Thursday, Oct 2nd 1:30 PM – 4:00 PM)
45 ©2014 Schneider Electric. All Rights Reserved.
All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies or their respective owners.