PRODUCT SPECIFICATIONS & TRIMMING GUIDE

2 0 1 4

This guide is one of many tools we offer. In the following pages you will find the items below to help you better fit and build clubs with our True Temper, Grafalloy and Project X shafts.

1. Product Specs2. Product Trimming Instructions3. Weight vs. Trajectory charts for our products4. Player Profile references for our products

At True Temper, we recognize the importance of being properly fit for equipment. Our company is dedicated to educating fitters and players on the importance of custom fitting and providing them the tools to do so.

1

A great resource for finding the right shaft is our ShaftFit.com online fitting site. By answering a few simple questions, golfers can narrow down their shaft choices to find the best equipment for their game.

Through our education initiatives, we have created an elite network of certified clubmakers and fitters that have been trained by our world-renowned engineers. These are our Performance Fitting Centers. To become certified or find a PFC near you, visit TrueTemper.com/Performance-Fitting-Centers.

All PGA Professionals, golf retailers or other industry professionals are encouraged to join our Professional Fitting Center network. Through this program, you will gain basic technical knowledge of golf shaft designs and performance as well as tips on how to properly fit your clients. To become certified, visit TrueTemper.com/PGA-PFC.

2

The purpose of this guide is to provide detailed product specifications and trimming instructions for True Temper, Grafalloy and Project X shafts.

Please remember the following are general rules for assembling your clubs:

1. Butt trim shafts to finished length after tip trimming unless specififed.

STANDARD TIP TRIMMING

RECOMMENDED ASSEMBLED CLUB LENGTHS

2. Taper tip shafts should never be tip trimmed because they are designed to discrete lengths. Butt trim taper tip shafts to finished length.3. The finished club lengths listed below are for reference only and should not be considered standard lengths.

WOODS- Tip Trim -

IRONS- Tip Trim -

Driver 3-Wood 5-7 Wood0.0 0.5 1.0

1-Iron 2-Iron 3-Iron 4-Iron 5-Iron 6-Iron 7-Iron 8-Iron 9-Iron PW0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.25

WOODS

IRONSSteelGraphite

SteelGraphite

Driver 3-Wood 4-Wood 5-Wood 7-9 Wood44.045.0

42.043.0

42.542.5

41.043.0

41.041.0

1-Iron 2-Iron 3-Iron 4-Iron 5-Iron 6-Iron 7-Iron 8-Iron 9-Iron PW39.7540.0

39.2539.5

38.7539.0

38.2538.5

37.7538.0

37.2537.5

36.7537.0

36.2536.5

35.7536.0

35.535.75

2

3

WEIGHT vs. TRAJECTORY RATINGS: STEEL

< 100g 101g - 110g 111g - 120g 120g