Page 1

— Prices Subject to Change Without Notice —

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Radiant Tube Heaters

Re-Verber-Ray Tube Heaters from Detroit Radiant. LP or Natural Gas Fired. 20-50% operating savings over conventional heat systems. Designed to heat floor zones, equipment and people, not the ceiling. No noisy blowers, just quiet, energy efficient operation. Ideal for car/truck washes, detail centers, auto service shops, farm buildings, warehouses, manufacturing facilities and almost anywhere heat is required.

DX3 Aluminized Steel Units are ideal for general heating applications. Coated Aluminized Combustion Chamber • 4” Coated Aluminized Steel Radiant Tubes • Polished Aluminum Reflectors • 50,000 to 200,000 BTU • 20’ to 80’ Lengths.

Straight Tube Models Recommended Part No. Length * BTU Tube Mount Height Wt. Net Ea.DT DX3-20-50S 21’ 9” 50,000 Straight 9’ - 15’ 120 lbs. $ 879.00 DT DX3-20-75S 21’ 9” 75,000 Straight 11’ - 18’ 120 lbs. 879.00 DT DX3-30-75S 31’ 5” 75,000 Straight 12’ - 20’ 160 lbs. 998.00 DT DX3-30-100S 31’ 5” 100,000 Straight 13’ - 23’ 160 lbs. 998.00 DT DX3-40-100S 41’ 1” 100,000 Straight 13’ - 23’ 190 lbs. 1125.00 DT DX3-40-125S 41’ 1” 125,000 Straight 14’ - 25’ 190 lbs. 1125.00 DT DX3-40-150S 41’ 1” 150,000 Straight 15’ - 27’ 190 lbs. 1299.00 * Specify LP or Natural Gas.

Ideal for Car/Truck Washes, Detail Centers, Auto Service Shops, Farm Buildings, Warehouses, Manufacturing Facilities & Almost Anywhere Heat is Required

U-Tube Models Recommended Part No. Length * BTU Tube Mount Height Wt. Net Ea.DT DX3-20-50U 13’ 1” 50,000 U-Tube 9’ - 15’ 120 lbs. $ 998.00 DT DX3-30-100U 17’ 9” 100,000 U-Tube 13’ - 23’ 160 lbs. 1127.00 DT DX3-30-125U 17’ 9” 125,000 U-Tube 14’ - 25’ 160 lbs. 1127.00 * Specify LP or Natural Gas.

DXSS Stainless Steel Units are designed for moist/wet/harsh environments like car wash and truck wash facilities.Coated Stainless Combustion Chamber • Coated Stainless Steel Radiant Tubes • Polished Stainless Reflectors • Stainless Burner • 75,000 to 150,000 BTU • 20’ to 60’ Lengths.

Straight Tube Models Recommended Part No. Length * BTU Tube Mount Height Wt. Net Ea.DT DXSS-20-75S 21’ 9” 75,000 Straight 11’ - 18’ 145 lbs. $ 1498.00 DT DXSS-30-75S 31’ 5” 75,000 Straight 12’ - 20’ 195 lbs. 1938.00 DT DXSS-30-100S 31’ 5” 100,000 Straight 13’ - 23’ 195 lbs. 1938.00 DT DXSS-40-100S 41’ 1” 100,000 Straight 13’ - 23’ 235 lbs. 2398.00 DT DXSS-40-125S 41’ 1” 125,000 Straight 14’ - 25’ 235 lbs. 2398.00 DT DXSS-40-150S 41’ 1” 150,000 Straight 15’ - 27’ 235 lbs. 2398.00 DT DXSS-50-100S 50’ 9” 100,000 Straight 15’ - 27’ 290 lbs. 2895.00 DT DXSS-50-125S 50’ 9” 125,000 Straight 15’ - 27’ 290 lbs. 2895.00 DT DXSS-50-150S 50’ 9” 150,000 Straight 16’ - 30’ 290 lbs. 2895.00 * Specify LP or Natural Gas.

U-Tube Models Recommended Part No. Length * BTU Tube Mount Height Wt. Net Ea.DT DXSS-20-75U 13’ 1” 75,000 U-Tube 11’ - 18’ 145 lbs. $ 1752.00 DT DXSS-30-75U 17’ 9” 75,000 U-Tube 12’ - 20’ 195 lbs. 2195.00 DT DXSS-40-100U 22’ 9” 100,000 U-Tube 13’ - 23’ 235 lbs. 2595.00 DT DXSS-40-125U 22’ 9” 125,000 U-Tube 14’ - 25’ 235 lbs. 2595.00 DT DXSS-40-150U 22’ 9” 150,000 U-Tube 15’ - 27’ 235 lbs. 2595.00 * Specify LP or Natural Gas.

Car Washes

Vehicle Storage

Distribution Facilities / Warehouses

Standard Features on All Units Include: 4” x 10’, 16 gauge radiant tubes • 24” Flexible gas line • Hot surface ignition • CSA, UL, IAS, CE rated • 120V, 60Hz • 4” Duct intake • Operating indicator lights • 1/2” NPT gas inlet • Made in the USA.

Note: Gas requirements are 5” minimum WC Natural Gas and 11” minimum WC LP Gas. Straight or U-tubes style as noted.

Page 2

— Prices Subject to Change Without Notice —

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Infrared Gas-Fired Space Heaters

High Intensity, Gas Fired Infrared Heaters from RE-VERBER-RAY. DR Series unvented infrared design heats floors, people and equipment. Ceramic burners with stainless steel rods increase temperatures and efficiency. Polished aluminum reflectors. Direct spark ignition with 100% shut-off. Circuit boards designed for high moisture environments. 5 Year burner warranty. CSA and CE certified, UL listed. LP or Natural Gas fired. 120 Volt control (24 volt and millivolt also available). All units are designed to hang from the ceiling. Optional thermostats and chain sets are shown below.

Infrared Gas-Fire Space Heaters Mounting Part No. Gas BTU Height Wt. Net Ea.DT DR30-NFS2 Natural 30,000 12’ - 14’ 18 lbs. $ 437.00 DT DR45-NFS2 Natural 45,000 12’ - 14’ 27 lbs. 536.00 DT DR60-NFS2 Natural 60,000 14’ - 16’ 27 lbs. 536.00 DT DR75-NFS2 Natural 75,000 15’ - 17’ 36 lbs. 635.00 DT DR100-NFS2 Natural 100,000 17’ - 20’ 36 lbs. 635.00 DT DR130-NFS2 Natural 130,000 21’ - 24’ 45 lbs. 739.00 DT DR160-NFS2 Natural 160,000 24’ - 28’ 54 lbs. 871.00 DT DR30-PFS2 LP 30,000 12’ - 14’ 18 lbs. 437.00 DT DR45-PFS2 LP 45,000 12’ - 14’ 27 lbs. 536.00 DT DR60-PFS2 LP 60,000 14’ - 16’ 27 lbs. 536.00 DT DR75-PFS2 LP 75,000 15’ - 17’ 36 lbs. 635.00 DT DR100-PFS2 LP 100,000 17’ - 20’ 36 lbs. 635.00 DT DR130-PFS2 LP 130,000 21’ - 24’ 45 lbs. 739.00 DT DR160-PFS2 LP 160,000 24’ - 28’ 54 lbs. 871.00DT THET5 Thermostat for Dry Environments ..................... 33.95 DT TH115 Thermostat for Wet Environments ..................... 73.95 DT DRCS Hanging Chain Set with Hooks for One Heater . 16.80

D

Electric Infrared HeatersShort Wave Electric Infrared Heaters. Unique design produces heat and visible light energy. Ideal for heating equipment or people, warehouses, workstations, equipment rooms. Lower mounting height requirements than other infrared heaters. Compact construction. ETL rated for indoor or outdoor use. Black, powder-coated aluminized steel housings (stainless also available). Clear quartz lamps are standard but glare reducing lamps are an added option. Single phase 120 or 240 volt units are shown, but 208, 480 and 575 volt options are also available. Not designed for wet environments.

Electric Infrared Heaters Part No. BTU Volts Watts Amps Length Wt. Net Ea.DT SW24B1A16W 5,460 120V 1600 13.3 21” 15 lbs. $ 289.00 DT SW24B1C16W 5,460 240V 1600 6.7 21” 15 lbs. 289.00 DT SW33B1C25W 8,530 240V 2500 10.4 22” 19 lbs. 359.00 DT SW24B2C16W 10,920 240V 3200 13.3 22” 20 lbs. 407.00 DT SW33B2C25W 17,060 240V 5000 20.8 26” 26 lbs. 569.00

Portable Infrared Heater

Portable Infrared Heater is designed for a variety of heating applications including warehouses, construction sites, farm and ranch, etc.

Features: Direct heat flow by radiation with no air movement • Low noise level • Built in oil burner • Electronic flame control • 1’ Power cord • Stainless steel combustion chamber • Shock-proof polyethylene fuel tank with manual drain • Oil filter • 12” plastic wheels • Floor protection shield • Optional thermostat with 30’ cord for +20° F. to +140° F.

Portable Infrared Heater Part No. BTU Wt. Net Ea.MV F155 154,000 161 lbs. $ 2575.00MV 487101 Thermostat .............. 125.00

Specifications:• Rated to 154,000 BTU

• Can Operate on Kerosene, #1 Diesel, #2 Diesel or Jet Fuel

• Gas Tank Capacity: 17 Gallons, 16 Hour Run Time

• Power Supply: 120 Volt, 1 Phase, 60 hz, 4.1 Amps

• CSA Rated

• Dimensions: 57-1/2” D x 28” W x 41” H

D

Page 3

— Prices Subject to Change Without Notice —

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

CryptoPay Swiper

CryptoPay Credit Card System

A simple and economical way to accept Credit Cards in your Bays, Vacuums, Auto Cashiers, Pet Washes or Vending Machines. Easily convert existing equipment or specify on new meter systems.

As simple as drilling holes and mounting the swipers to your meters and vacuums. Swipers use a secure, wireless connection to the data coordinator in your equipment room. This coordinator can verify information from up to 30 swipers per location and then sends the encrypted data via internet service to your card service/processor.

Swipers combine power supply, control and technology electronics in each unit. Push button features allow customers to stop when they wish or add time without additional card swipe. Lighted LED feature on all swipers show customers direction to swipe.

Accepts Mastercard, Visa, Discover and American Express.

Systems can be set in the field for count up or count down mode which allows you to charge for time in the way that best suits your business. Designed for USA Domestic use only.

Simple & Economical Way to Accept Credit Cards in Your Bays,

Vacuums, Auto Cashiers, Pet Washes or Vending Machines!

Part No. Description Net Ea.CB 11SW CryptoPay Swiper ............................................. $ 369.00 CB 11CR Coordinator ....................................................... 369.00 CB 12SN Bay Sign, Count Up .......................................... 27.95 CB 12SN-1 Bay Sign, Count Down, Coin Pulse .................. 27.95 CB 12SN-2 Bay Sign, Count Down, Credit Pulse ................ 27.95

11CRCryptoPay Coordinator

11SWCryptoPay Swiper

CryptoPay Accepts These Cards

The transaction travels across a radio mesh network to the coordinator where the information is temporarily held in the encrypted form and never “in the clear.”

Secure.

CryptoPay Swiper

CryptoPay Swiper

Every CryptoPay swiper combines the power supply, control and

CryptoNet technology electronics into a single unit.

All in One.

This single CryptoNet Coordinator supports all of our POS units and simply connects to

your internet service.

Simple.

D

D

DD

D

Count Down SignCount Up Sign

— Prices Subject to Change Without Notice —

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

FoamMasters

Model 890Wall Mount

FoamMaster Cleaning Systems automatically dilute cleaning chemicals with water and then use compressed air to generate thick, clinging foam. Foam cleaning allows for the cleaning solution to remain in contact with the soil load surface for extended time period.

Three Systems are Available: Wall mounted, portable and drum mounted to meet any foam cleaning requirement. All of these units work on as little as 40 PSI air and 3 GPM water flow.

Part No. Style Wt. Net Ea. HR 865 Drum Mount 11 lbs. $ 299.00 HR 890 Wall Mount 21 lbs. 545.00 HR 890C Cart Mount 36 lbs. 1250.00

Model 865 is a drum mounted unit designed to easily fit onto 30 or 55 gallon drums. Chemical application only, no rinse option is available on this model. Comes with 25’ plastic discharge hose. Dilution range from 5:1 to 128:1.

Model 890 features stainless wall mount enclosure, air regulator, air gauge, rinse valve, 25’ of rubber hose and foam nozzle. Dilution range from 5:1 to 240:1.

Model 890C has the same features as Model 890 but also includes a wheeled cart when portability is needed.

Model 890Cart Mount

D

D

D

Chem Dispensing SystemsSimplifies cleaning and sanitation operations. Dilutes, dispenses and rinses with the twist of a handle. The perfect choice for any application where cleaning and/or sanitizing is required. Designed for wall mounting. Stainless steel and brass construction.

Available in one product (clean & rinse) or two products (clean, sanitize & rinse). Two product unit can easily be set for two different dilution rates.

Chemical flow rate is 3.5 GPM. Rinse flow rated to 5 GPM. Dilution range from 10:1 to 512:1. Built-in check valve protects against reverse flow. Hose rack is standard but inlet and outlet hoses are not included.

Part No. Products Wt. Net Ea.HR 918 One, (Clean/Rinse) ............. 7 lbs. $ 229.00 HR 919 Two, (Clean/Sanitize/Rinse) 8 lbs. 269.00

Model 919Two ProductModel 918

One Product

DD

Air Inlet

Water Inlet

Drum Bung

Model 865Drum Mount

Outlet (plastic hose not shown)

25’ Rubber Hose

Page 4

Page 5

— Prices Subject to Change Without Notice —

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Skid Mount High Pressure UnitsFor Pickups and Flatbeds

Skid Mounted Pressure Washers are “Self-contained” wash units that are perfect for a wide variety of cleaning requirements. Easy in-out design for pickup or flat bed trailers. All units feature GX Series Honda engines and General plunger pumps. Frames are aircraft grade aluminum that are chemical-resistant and rustproof.

Skid Mounted Pressure Washer is designed for ATV vehicles like Gator, Rhino, Mule and many others. Totally self-contained wash unit that is perfect for a variety of cleaning applications. Skid is constructed of aircraft grade aluminum that will not rust and are chemical-resistant. Designed for easy in-out when not needed.

Part No. Flow Pressure Drive Wt./Lbs. Net Ea.BI PS3027D 3.0 GPM 2700 PSI Direct 375 $ 2075.00 BI PS4040D 4.0 GPM 4000 PSI Direct 400 2365.00 BI PS4040BT 4.0 GPM 4000 PSI Belt 400 2795.00

D

PS4040D

D

Skid Mount High Pressure UnitFor ATV Vehicles

Standard Features: 50 gallon water tank • Hand rewind reel with 100’ of hose • Trigger wand with extension • Chemical injector • Direct drive pump • Honda GX Series engine • General Plunger Pump • Dimensions are 38” W x 48” L x 44” H.

Part No. Flow Pressure Drive Wt./Lbs. Net Ea.BI PAT3027 3.0 GPM 2700 PSI Direct ??? $ 2075.00

PAT3027 Gator ATV NOT INCLUDED

Standard Features: Includes 200 gallon water tank • Hand rewind reel with 100’ of hose • Trigger wand with extension • Chemical injector • Direct drive or belt driven pump as noted • Dimensions are 49” W x 62” L x 44” H.

Pro-Tow Jetter Units

Sewer / Jetter Trailer Units. All models include the following features: Electric start engine • Electric rewind hose reel • 200 Gallon water tank with float valve • General brand plunger pump with pulse valve • Foot activated control valve • Jetter nozzle pack • 25 Gallon winterizing tank • Marine battery • 15 Gallon fuel tank.

D

Trailers are rated to 3500 lbs. capacity and include powder-coated frame, 15” tires, aluminum fenders, lights, jack, safety chains, poly tool box and external grease fittings. Complete jetter dimensions are 135” L x 82” W x 60” H.

All units are fully assembled and tested prior to shipping. Hose reel capacity is 500’ of 3/8” or 350’ of 1/2” hose. Hoses are not included but can be ordered to meet your specific needs.

Part No. Max. Flow Max. PSI Engine Wt./Lbs. Net Ea.BI 535JTR 5.5 GPM 3500 PSI GX630 Honda 1485 $ 8545.00 BI 835JTR * 8.0 GPM 3500 PSI GX690 Honda 1495 8945.00 BI 1030JTR * 10 GPM 3000 PSI 27 HP Kohler 1495 10195.00 BI 1230JTR * 12 GPM 2800 PSI 30 HP Kohler 1500 10495.00* 8 GPM Unit can use 3/8” hose, but 1/2” is recommended due to pressure loss. 10 & 12 GPM Units require 1/2” hose.

Page 6

— Prices Subject to Change Without Notice —

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Spray Shield

High Impact Spray Shield is designed to protect operators from backspray of liquids, materials or solids. Great for close-up cleaning jobs like pavement or deck cleaning. Durable, clear plastic pan is designed so the operator can still see the working surface while cleaning. Each spray shield includes 10” plastic pan, inlet quick coupler for 1/4” spray lances and outlet quick coupler for QC spray nozzles (nozzles and lances are not included). Couplers are rated to 5000 PSI.

Part No. Net Ea.SM A2002 High Impact Spray Shield ............... $ 24.95

Protect Yourself from Back Spray!

Nozzle Holder

Part No. Net Ea.SM A2001 Nozzle Holder .................................. $ 7.95

Unique Nozzle Holder keeps spray nozzles at your fingertips for easy and efficient change-out when necessary. Holder is designed to be securely mounted to the trigger guard of most any trigger spray wand. Plastic construction with stainless steel screws. High strength zip ties are included. Designed for use with QC quick disconnect nozzles. Just push into the holder and nozzles are held firmly in place until you need them. Holds up to (4) nozzles which are not included.

Hot Wax & Shine

Hot Wax & Shine from Simoniz. A great new Carnauba Wax product that gives a Hand Wax Finish in conveyors, in-bay automatics or self-serve bays. Can be applied through standard wax arches. Lighted, Bubblizer Arches are also available for a complete customer experience and top end sales package in conveyor systems. Bright yellow color with Pina Colada scent. Sold in 5 gallons pails or 30 gallon drums.

Part No. Container Net Ea. TS 319HW 5 Gallon Pail $ 175.00 TS 319HW-30 30 Gallon Drum 925.00

319HW-30 30 Gallon Drum

D

CleanStream™ Boom Hoses

Unique, High Performance Cleaning Hose is designed and tested to last over 5 times the life of standard rubber hose. Ideal for car wash bays (rated to 140° F.). Proprietary, smooth matte cover is non-marking, UV resistant and extremely abrasion-resistant.

One-Wire construction is rated to 4000 PSI and is flexible and kink-resistant even in cold weather. Super smooth inner tube means less pressure loss and increased performance. Overall weight is up to 30% less than conven-tional rubber hoses. Available in 3/8” I.D. with 3/8” MPT ends and (1) bend restrictor. Assembled lengths as shown. Non-marking feature is standard in both colors. Made in USA.

Tested to Last Over 5 Times the Life of Standard Rubber Hose !

PA-No. Size Color Wt. Net Ea.CS 1700-12E 3/8” x 12’ Black 2.5 lbs. $ 18.95 CS 1700-15E 3/8” x 15’ Black 2.9 lbs. 20.95 CS 1700-18E 3/8” x 18’ Black 3.4 lbs. 22.95 CS 1700-12L 3/8” x 12’ Blue 2.5 lbs. 19.60 CS 1700-15L 3/8” x 15’ Blue 2.9 lbs. 21.80 CS 1700-18L 3/8” x 18’ Blue 3.4 lbs. 23.95

1700-15L Blue Hose Assembly

1700-15E Black Hose Assembly

D

D

Hose Savers

Page 7

— Prices Subject to Change Without Notice —

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Biologically Activated Carbon (BAC) for controlling pit odor in car and truck wash holding pits and reclaim pits. BAC is an all natural, all organic additive that works on microbial technology to break down biodegrade fats, oils, grease, total suspended solids and unwanted bacteria that cause pit odors.

Unique formulation of naturally occurring good bacteria that act on and consume unwanted odor producing bacteria. Contains no chemicals. Non-toxic, non-corrosive and environmentally safe. Works well in discharge lines as well as holding pits.

Easy to use and install. Attach the BAC bag strap to your pit lid and completely submerge into the pit water. Product does not activate until coming in contact with water and unwanted bacteria. About every *2 months just drop a recharge pack into the holding bag and forget about it. Simple, safe, effective odor control. Each startup bag can effectively treat up to 1,000 gallons of pit water. For larger pits, multiple bags can be used.

* Refill requirement is effected by flow rates and could be longer or shorter based on specific wash volume.

BAC ODOR CONTROL

Part No. Wt. Net Ea.TS 27BAC BAC Start-Up Bag with Activated Carbon 26 lbs. $ 289.00 TS 1BAC BAC Carbon Refill Kit .............................. 1 lb. 52.50

Works Well in Holding Pits & Discharge Lines!

27BAC1BAC

D

D

Economy Sprayers

Designed for occasional spraying requirements. General purpose weed and pest control. Can also be used for deck cleaners and mildew removers. 2 and 3 Gallon sizes. Poly tank with durable wand and shut-off valve. Built-in pressure relief valve. Plastic adjustable nozzle. Easy-to-fill funnel top. 19” Wand and 29” Hose.

Part No. Wt. Net Ea.SL C2G Handheld Sprayer 2 Gallon Capacity ...... 4 lbs. $ 24.85 SL C3G Handheld Sprayer 3 Gallon Capacity ...... 6 lbs. 28.90

D

Model C2G

Spreader

Part No. Capacity Wt. Net Ea.SL 421S Granular Spreader .. 20 lbs. 7 lbs. $ 68.95

Granular Applicator Spreader from Solo. The ideal choice for use with seed, fertilizer and ice melt products. Plastic construction with fully enclosed gear box and lubricated metal gears for added corrosion-resistance and long life. Adjustable for drop rate and throw direction. Polyethylene tank has 20 lb. capacity. Padded strap with cross shoulder design.

D

Undercarriage Cleaning System

Part No. Wt. Net Ea.MM 80640 Undercarriage Wash Unit 77 lbs. $ 1298.00

D

Complete Undercarriage Cleaning Unit from Mosmatic. The perfect choice for car and truck wash operations. Compact design for easy installation in floors. Can be used for tunnels, self-serve, automatics, truck washes or fleet cleaning requirements. Heavy-duty, stainless steel construction.

System Includes: Stainless floor box • Stainless cover lid • Stainless high pressure swivels • Stainless water manifold • Stainless stabilizer nozzles designed for maximum coverage and high impact cleaning.

Box dimensions are 29-1/2” Long x 12” Wide. Cover plate is 29-1/2” Long x 16” Wide. Box has 3/4” FPT inlet to feed water manifold and 1” FPT outlet for drain. Rated to 4000 PSI & 250° F. Note: EG Nozzle Inserts are not included and will be supplied to match existing pump flow and pressure).

Miniature Air & Water Regulators

Miniature Regulators from Parker Pneumatics. Compact design provides quick response and accurate pressure regulation. Non-rising adjusting cap. Inlet pressures to 300 PSI.

Model 14R: Air Line Regulator features “zinc” body with 1/4” inlet/outlet and 1/8” gauge port. Relieving Design. Rated to 28 CFM. Temperature rating is -4° to 125° F.

Model 15R: Air Line Regulator features “zinc” body with 3/8” inlet/outlet and 1/4” gauge port. Relieving Design. Rated to 28 CFM. Temperature rating is -4° to 125° F.

Model 20R: Air Line Regulator features “brass” body with 1/4” inlet/outlet and 1/8” gauge port. Rated to 28 CFM air and 1.25 GPM water. Temperature rating is +32° to 125° F. Non-Relieving Design.

Maximum Pressure Part No. Ports Flow Rate Range Net Ea.PA 14R113FC 1/4” FPT 15 CFM 2-125 PSI $ 15.95 PA 15R113FB 3/8” FPT 28 CFM 2-125 PSI 28.50 PA 20R113GC 1/4” FPT 15CFM/1.25 GPM 2-125 PSI 25.95

20R

14R

15R

D

D

D

Page 8

— Prices Subject to Change Without Notice —

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Mamba Trax Shoe Covers

Qty. Per Box Part No. Per Box Net Ea.BM MTX50 Black Mamba Trax Shoe Covers 25 Pair $ 9.95 10% Discount On Case of 6 Boxes

Grip-Rite Trax Covers Provide Better Footing

Than Other Brands !

D

Chemilizer Injectors

Adjustable Chemilizer

1009 Series Chemilizer

Chemilizer is an Industry-Leading, Water-Driven Chemical Injector designed for a wide variety of applications including car/truck wash, animal health, horticulture and food processing. Powered by the water flow, the internal motor drives the chemical pump. Extremely precise and accurate. Injection rates stay consistent no matter if changes occur in water flow or pressure.

Features: Polypropylene housing and Viton® diaphragm • Rated to 100° F. • Viscosities to 1500 cps. • Ports are 3/4” MPT • Rated from 3 to 85 PIS and .02 to 11 GPM.

1009 Series are pump cartridges only to convert existing fixed rate Chemilizer units to the new adjustable rate design. Easy 1/4 turn installation.

Part No. Style Injection Rate Wt. Net Ea.DM CH9000-AV1 Injector 20:1 to 64:1 8 lbs. $ 298.50 DM CH9000-AV2 Injector 50:1 to 164:1 8 lbs. 276.00 DM CH9000-AV3 Injector 150:1 to 500:1 8 lbs. 269.50 DM 10095982 Pump Only 20:1 to 64:1 2 lbs. 101.50 DM 10095929 Pump Only 50:1 to 164:1 2 lbs. 81.50 DM 10095984 Pump Only 150:1 to 500:1 1 lbs. 101.50

D

D

Detailer Hose & Wand Assembly

D

Part No. Style Net Ea.TE U1570 6’ Detailer Hose Assembly External Spray $ 139.50 TE U1570S 6’ Detailer Hose Assembly Internal Spray 158.50

Complete detail assembly includes stainless hand tool with built-in vacuum release, 6’ solution/vacuum hose with cuff, stainless 1-1/2” hose joiner allows for quick attachment to your main vacuum line. Rated to 500 PSI with brass wand valve. Available in internal or external styles.

Available in Internal or External Styles

Mach 12 & 15 Titanium Truck Wands

Top of the Line Truck

Mount Wands !

Part No. Tube Width Weight Net Ea. TE MACH-12 1-1/2" 12” 8 lbs. $ 599.00 TE MACH-15 2” 15” 9 lbs. 699.00

Top of the Line Truck Mount Wands. Titanium construction with Teflon glides. Engineered for maximum recovery and ease-of-use. Lightweight yet strong for long life. Complete with stainless nozzles and stainless solution line. Nozzle manifolds are adjustable for nozzle angle. 1-1/2” model has (4) nozzles and is 12” wide. 2” Model has (5) nozzles and is 15” wide. Rated to 800 PSI. PMF Brand.

D

D

Teflon Guide

Paper Floor Mats

Paper Floor Mats are an inexpensive way to protect customer’s vehicles from dirt or grease and grime. Ideal for detail shops, auto dealers, lube shops, etc. Sold in boxes of 500. Size is 21” x 16”. Weight is 15 lbs.

Part No. Wt. Net Ea.GQ PC500 Paper Floor Mats, Box of 500 ............. 15 lbs. $ 38.50

PC500 Paper Floor Mat

Inexpensive Way to Protect Customer’s Vehicles

Page 9

— Prices Subject to Change Without Notice —

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

XP Pumps

XP Pumps from Cat Pumps are an ideal choice for carpet extractors, Misting/cooling, hydrostatic testing and truck mount applications. Patented, greaseless design for added life, serviceability and performance.

Pump and Motor Combinations are rated from 0.5 to 2.0 GPM and 100 to 800 PSI. Standard motors are 1/3, 1/2 or 3/4 HP, single phase, 120/240 volt. Pumps feature ceramic plungers, stainless valves, Viton® seals and aluminum housings. Easy drain out feature is also standard.

Part No. GPM PSI HP Wt. CC 1XP050.031 0.50 800 1/3 25 lbs. CC 1XP075.031 0.75 650 1/3 25 lbs. CC 1XP085.031 0.85 600 1/3 25 lbs. CC 1XP100.031 1.00 500 1/3 25 lbs. CC 1XP125.031 1.25 400 1/3 25 lbs. CC 1XP150.031 1.50 325 1/3 25 lbs. CC 1XP200.031 2.00 250 1/3 25 lbs. CC 1XP085.051 0.85 800 1/2 30 lbs. CC 1XP100.051 1.00 800 1/2 30 lbs. CC 1XP125.051 1.25 600 1/2 30 lbs. CC 1XP150.051 1.50 500 1/2 30 lbs. CC 1XP200.051 2.00 400 1/2 30 lbs. CC 1XP125.071 1.25 800 3/4 35 lbs. CC 1XP150.071 1.50 700 3/4 35 lbs. CC 1XP200.071 2.00 500 3/4 35 lbs.

CallToll Free

ForPrices

D

Water Spout Faucet

Tr igger Act ivated Water Spout Faucet is a common replacement i t em on wa te r /a i r machines. 3/8” FPT inlet with flexible rubber outlet. Overall size is 5-1/4”. Plated brass construction with flexible rubber discharge.

Part No. Net Ea.AA 8647 Water Nozzle ..................... $ 29.15

These unique valves are designed to maintain water levels in storage tanks, cisterns or irrigation applications. Eliminates constant stop/start of pumps or water systems. As tanks empty, the weighted float travels down the cord until it hits the bottom stop, the valve then opens giving in full water flow. Float rises to top stop and shuts off valve as water level rises.

Jobe Diferential Float Valves

Features:• Corrosion-Resistant Materials

• High Flow Rates

• Adjustable Stop & Start Levels

• Reduces Pump Operation

• Fits Almost Any Type of Tank

• Rated from 15 to 150 PSI

Vacuum / Blower Units- Hand Held -

Vacuum / Blower / Dryer Hand Held Unit. This powerful little model is rated to 60” water lift and 70 CFM. All steel construction with powder-coated finish. Available in 120 volt or 12 volt models. 110 Volt Unit is rated to 500 watts, 4.5 amps. 12 Volt Unit will operated from any 12 volt receptacle in car or truck. Both models come with 19” hose, crevice tool, dust brush, upholstery nozzle, 20” extension and extra filter bags. Dry pickup only.

Part No. Wt. Net Ea.GS VM12500 Vacuum/Blower, Hand Held, 120 Volt 6.5 lbs. $ 73.95 GS AM12IDA Vacuum/Blower, Hand Held, 12 Volt 6.5 lbs. 69.95GS DVP26 Disposable Filter Bags, Pack of 5 ..................... 3.95

Maximum Part No. Inlet Flow Net Ea.JO TPVD20DLT 3/4” MPT 55 GPM $ 176.50 JO TPVD1DLT 1” MPT 75 GPM 177.50 JO VXVD112 1-1/2” MPT 140 GPM 220.00 JO VXVD2 2” MPT 140 GPM 226.00

Page 10

— Prices Subject to Change Without Notice —

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Waterproof LED Tube Lights for almost any application. Brighter than Metal Halide bulbs at lower wattage. Waterproof design is ideal for outside use or wet environments like car and truck wash bays. LED lights have significantly lower power consumption than other light sources.

GGLED12. Single Package includes (2) 6’ sections and mounting hardware. Equal to 90 watt output (no money saver mode in this package). Designed for 12’ run.

GGLED24. Single Package includes (4) 6’ sections, (2) power supplies and mounting hardware. Equal to 175 watt output or 90 watt in money saver mode. Designed for 24’ run.

GGLED36. Economy Package includes (9) 4’ sections and mounting hardware. Equal to 250 watt output (no money saved mode in this package). Designed for one self-serve or automatic bay.

GGLED48. Standard Package includes (8) 6’ sections, (2) power supplies and mounting hardware. Equal to 350 watt output or 175 watt in money saver mode. Designed for one self-serve or automatic bay.

GGLED60. Deluxe Package includes (10) 6’ sections, (2) power supplies and mounting hardware. Equal to 425 watt output or 212 watt in money saver mode. Designed for one self-serve or automatic bay.

The above photo shows the Deluxe Package with 1/3 of the lights turned off for energy savings. The light can be wired to a motion sensor or through the coinbox to have the additional lights come on when the bay is in use.

LED Tube Lights are ideal for Tunnel Applications as the heavy-duty, waterproof tubes are perfect for harsh wet environments.

• Up to 80% Lower Power Consumption

• Minimal Maintenance, No Bulbs or Ballasts to Replace

• Long Lasting 50,000 Hour Lifespan

• Lower Heat Output Reduces Cooling Costs & Further Reduces Costs

• Lower Operating & Repair Costs Mean Fast Return on Your Investment (As quick as 12-30 months)

• Lights are Secured in Heavy-Duty, Water-Proof Tubes

LED lights also have more even light distribution meaning fewer hot spots and dark areas. Highly directional which allows light to be focused if required. Instant-On means no waiting for warm up. Mercury-free, lead-free and silent operation, NO HUM. No UV or infrared radiation. Efficient operation at all temperatures.

Sold in 4’ or 6’ assembly kits for bay or tunnel washes. Some kits include (2) power supplies that allow for the partial shutdown of some light sections to further reduce operating costs. (Example: 1/2 bulb shuatdown during late night hours).

Kits can be combined for larger lighting requirements to meet your specific needs. All kits can ship by UPS or FedEx.

D

Minimal Maintenance – No Bulbs or Ballast to Replace!

LED Tube Lighting

Part No. Linear Feet Power Supplies Wt. Net Ea.GB WP12 12’ 1 7 lbs. $ 459.00 GB WP24 24’ 1 14 lbs. 879.00 GB WP36 36’ 1 20 lbs. 1289.00 GB WP48 48’ 2 27 lbs. 1659.00

Page 11

— Prices Subject to Change Without Notice —

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Revolutionary Highly Concentrated Liquid Detergents & Waxes from Turtle Wax. 5 gallons of concentrated liquid. No more drums to handle or dispose of!! Minimal freight costs!! Lower per-car cost means more profit for you!!

• Revolutionary compact design virtually eliminates all warehousing, freight, labor, handling and inventory problems.

• Sold in 5 Gallon Pails.

• Contains nearly 100% active ingredients - virtually water-free.

• Flexible dispensing options allow for a wide range of dilution and cost-per-car alternatives without costly new equipment.

• Brought to you by Turtle Wax® - the most widely recognized name in the car wash industry.

HP10-5 Sealer Wax5 Gallon - OK for Self-Serve• Lemon Citrus Scent• Seals out water, salt and dirt to protect a

car’s finish

• Environmentally friendly formula

• Safe for clear coat finishes

• 1/8 - 1/4 ozs per cycle minute

• Dilution 800:1 (Up to 5100 Cars per pail)

• Ship Wt. 40 lbs.

3 or More Pails per order receives an additional 10% Discount, 10 or More Pails per order receives an additional 15% Discount.

HP19-5 Crystal Polymer Glaze5 Gallon - OK for Self-Serve• Orange Citrus Scent

• Designed to repel water and seal out water, salt and dirt

• 1/8 - 1/4 ozs per cycle minute

• Dilution 800:1 (Up to 5100 Cars per pail)

• Ship Wt. 40 lbs.

HP119-5 Blazin’ Glaze Clear Coat Protectant - 5 Gallon - OK for Self-Serve• Orange Citrus Scent• Seals out water, salt and dirt to protect a

car’s finish• Contains carnauba wax• Superior clear coat protectant reduces drying time• 1/8 - 1/4 ozs per cycle minute• Dilution 800:1 (Up to 5100 Cars per pail)• Ship Wt. 40 lbs.

HP15-5 Drying Agent5 Gallon• Unscented

• Protects vehicle’s undercarriage from rust formation due to moisture, salt & road grime

• Designed to make water bead up & break off the car faster

• 1/8 - 1/4 ozs per cycle minute

• Dilution 8:1 & then 1 oz. per vehicle

• Ship Wt. 40 lbs.

HP20-5 Triple Shine - RED5 Gallon• Cherry Scent

• Shines and protects all vehicle finishes

• Contains carnauba wax & flash foam technology

• 1/4 - 1/3 ozs per vehicle

• Dilution 450:1 (Up to 2500 Cars per pail)

• Ship Wt. 47 lbs.

HP319-5 ICE Instant Shine5 Gallon• Mango Scent• Total Surface Protection for all vehicle

surfaces• Provides maximum water repellency on glass• Protects and shines chrome, glass,

paint & trim• Light foam with mango scent• Dilution 400:1 (2600 Cars per pack)• Ship Wt. 48 lbs.

HP21-5 Triple Shine - BLUE5 Gallon• Cherry Scent

• Shines and protects all vehicle finishes

• Contains carnauba wax & flash foam technology

• 1/4 - 1/3 ozs per vehicle

• Dilution 450:1 (Up to 2500 Cars per pail)

• Ship Wt. 46 lbs.

HP62-5 Triple Shine - GOLD5 Gallon• Cherry Scent

• Shines and protects all vehicle finishes

• Contains carnauba wax & flash foam technology

• 1/4 - 1/3 ozs per vehicle

• Dilution 450:1 (Up to 2500 Cars per pail)

• Ship Wt. 46 lbs.

Red, Blue & Gold Triple Shine

3 or More Pails per order receives an additional 10% Discount, 10 or More Pails per order receives an additional 15% Discount.

WAX

— Call for Current Pricing —

Call for Current Pricing

HP919-5 Fire Wax Red5 Gallon - OK for Self-Serve• Cinnamon Scent• Rich Red Foaming Wax• Carnauba base for better protection• Dilution 200:1 (Up to 1300 Cars per pail)• Ship Wt. 40 lbs.

Page 12

— Prices Subject to Change Without Notice —

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

SPECIALTY PRODUCTS

3 or More Pails per order receives an additional 10% Discount, 10 or More Pails per order receives an additional 15% Discount.

HP35-5 Rust Inhibitor5 Gallon• Unscented

• Protects a vehicle’s undercarriage from rust formation due to moisture, salt & road grime

• Same effective ingredients used by major steel & auto manufacturers to coat & protect metals against rust.

• Dilution 8:1

• Ship Wt. 45 lbs.

HP108-5, 5 Gallon HP108-30, 30 Gallon Water Based Tire Dressing• Unscented

• Water based - no solvents

• Glossy appearance

• Viscosity reduces “sling off” effect

• Anti-clogging formulation

• Dilution 1 oz. applied with sponge or cloth

HP470-5 Wheel & Tire Cleaner5 Gallon• High pH• Citrus Scent

• Foamy application allows for excellent coverage & extended dwell time

• Safe for all tire & rim surfaces including polished surfaces

• Dilution 15:1

• Ship Wt. 49 lbs.

HP550-5 Bug Remover5 Gallon• Lemon scent

• Loosens & removes stubborn residue from a vehicle’s surface

• Rich, dense foam for excellent customer appeal

• Safe for use on all paint surfaces

• Dilution 30:1

• Ship Wt. 46 lbs.

HP590-5 Wall & EquipmentCleaner - 5 Gallon• Industrial strength cleaner

• Safe on glass, metal & plastic surfaces

• Uses include removal of lime scale & soap residue

• Dilution 30:1

• Ship Wt. 48 lbs.

Turtle Wax® offers a full line of specialty products to clean and protect virtually every surface on a vehicle. Customers will feel pampered with a range of upgrade options for their car wash experience which will create increased revenue and customer loyalty.

Specialty Arches are Available - Call for Details!

Turtle Wax® ICE Arch Turtle Wax® FIRE Arch

— Call for Current Pricing —

HP107-5 Wet-N-Black Tire Dressing - 5 Gallon• Unscented

• Gives glossy appearance

• Contains Solvents

• Apply Direct, no dilution

• Ship Wt. 46 lbs.

Page 13

— Prices Subject to Change Without Notice —

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Revolutionary Highly Concentrated Liquid Detergents & Presoaks from Turtle Wax. 5 Gallons of concentrated liquid. No more drums to handle or dispose of!! Minimal freight costs!! Lower per-car cost means more profit for you!!

• Contains nearly 100% active ingredients - virtually water-free.• Flexible dispensing options allow for a wide range of dilution and cost-per-car alternatives without costly new equipment.• Turtle Wax® is the most widely recognized name in the car wash industry.

Frictionless Presoak Detergents

Friction Detergents

3 or More Hyper-Paks per order receives an additional 10% Discount, 10 or More Hyper-Paks per order receives an additional 15% Discount.

D

HP82-5 Frictionless Presoak5 Gallon• High pH• Unscented• Medium foaming formula• Exceptional cleaning in (2) Step process with

HP87 or HP90• Can be used in tunnel presoak arches as well• Dilution 80:1 (Up to 640 Cars per pail)• Ship Wt. 48 lbs.

HP87-5 Frictionless Presoak5 Gallon• Low pH• Unscented• Medium foaming formula• Exceptional cleaning in (2) Step process with

HP82 or HP90• Can be used in tunnel presoak arches as well• Dilution 160:1 (Up to 1200 Cars per pail)• Ship Wt. 47 lbs.

HP89-5 Presoak Boost5 Gallon• High pH• Unscented• Enhances penetration & removal of road film• Use in conjunction with any Turtle Wax

alkaline presoak• Optimal Dilution Range 25:1 to 40:1

(Up to 320 Cars per pail)• Ship Wt. 50 lbs.

HP86-5 Frictionless Presoak5 Gallon• Low pH

• Citrus Scent

• High foaming formula

• Dilution 150:1 (Up to 1100 Cars per pail)

• Ship Wt. 50 lbs.

HP90-5 Frictionless Presoak5 Gallon• High pH• Fresh Scent• Medium foaming formula• Exceptional cleaning in (2) Step process with

HP87 or HP82• Can be used in tunnel presoak arches as well• Dilution 80:1 (Up to 640 Cars per pail)• Ship Wt. 48 lbs.

CALL FOR PRICING ON ALL THESE PRODUCTS!

3 or More Hyper-Paks per order receives an additional 10% Discount, 10 or More Hyper-Paks per order receives an additional 15% Discount.

DETERGENTS

Call for Current Pricing!

HP11-5 Friction Detergent5 Gallon• Neutral pH• Unscented• High foaming formula• Mild solvents used to cut through heavy road

film on rocker panels, bumpers & grills• Used in Friction & Prep Gun applications• Dilution 500:1 (Up to 3700 Cars per pail)• Ship Wt. 48 lbs.

HP07-5 Friction Detergent5 Gallon• Neutral pH• Lemon Scent• High foaming formula• Maximum lubricity• Can be used in tunnel presoak arches as well• Dilution 500:1 (Up to 3700 Cars per pail)• Ship Wt. 48 lbs.

HP920-5 Friction Detergent - Red HP921-5 Friction Detergent - Yellow5 Gallon• Dense Red or Yellow Foam• Promotes Deep Cleaning• Enhanced Lubricity• Raspberry Scent• Used in Friction & Prep Gun applications• Dilution 500:1 (Up to 3700 Cars per pail)• Ship Wt. 48 lbs.

PRESOAKS & DETERGENTS

Page 14

— Prices Subject to Change Without Notice —

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

A revolutionary new process pump that can handle the day after day use in a grueling industrial environment. The SP100 Series Air-Operated Double Diaphragm Pump can be configured in materials that are resistant to many industrial chemicals and proven to provide complete compatibility coverage for a wide range of fluids. With it’s extensive list of features, the SP100 Series outperforms the competition time and time again.

• 15% More Flow & 20% More Efficient

• 66% Less Pulsation & 67% Fewer Parts

• 50% Less Repair Time

• 360° Uniform Seal

Reinforced Manifold An encapsulated stainless steel

ring embedded around the threads prevents over tightening & the

potential splitting of the manifold

The Most Advanced Air-Operated Diaphragm Pump on the Market!

5 Year Warranty

Air-Operated Double Diaphragm Pumps

SP100-10 Series 1” Metallic

Ball Check & Seats The ball & seat sets are matched

elastomer combinations that offer a minimum 20% improvement in suction

lift due to tighter seals.

Unique Diaphragm Construction

A stainless steel shaft with a reinforced diaphragm nut fully supports the

diaphragm & prevents cross threading. The uniform seal hinge minimizes wear.

Easy-Off Threaded Ring Construction

The Quik-Seal® ring is designed for quick-turn access to clear ball checks

& to replace diaphragms.

Ceramic Air Valve

The patented QuikFlow® air

valve provides fast trip over, resulting in a 60% reduction

in pulsation.

Foot MountRetrofits into most

existing mounting plates.

SP100-5 SeriesMaximum Solids: 3/32”Maximum Flow Rate: 17.5 GPMMaximum Air Inlet Pressure/ Discharge Pressure: 100 PSI

SP100-10 SeriesMaximum Solids: 3/16”Maximum Flow Rate: 56 GPMMaximum Air Inlet Pressure/ Discharge Pressure: 100 PSI

5 Year Warranty

Kits & AccessoriesWall Mount Brackets

KITS05KITS10W

KIT180MPPS Tote Plate

Filter/Regulator Assemblies

KITS05M Muffler

D

D

SP100-5 Series 1/2” Non-Metallic

Double Diaphragm Pumps Part No. Ports Body Diaphragm Max. Flow Wt. Net Ea.FR SP100-5S 1/2” Polypropylene Santoprene 17.5 GPM 8 lbs. $ 340.00 FR SP100-5T 1/2” Polypropylene Teflon 17.5 GPM 8 lbs. 448.00FR SP100-10H 1” Aluminum Hytrel 56.0 GPM 15 lbs. 605.00

Kits & Accessories FR KIT180MPPS Tote Plate for SP100-5, 1/2” Pumps .............................. $ 119.00 FR KITS05 Wall Mount Bracket for SP100-5, 1/2” Pumps ............... 28.00 FR KITS10W Wall Mount Bracket for SP100-10, 1” Pumps ................ CALL FR KITS05F Filter/Regulator Assembly for SP100-5, 1/2” Pumps ..... 108.00 FR KITS10F Filter/Regulator Assembly for SP100-10, 1” Pumps ......... 195.00FR KITS05M Muffler for SP100-5 & SP100-10 Pumps ....................... 12.00

Quick Flow Patented Air Valve Assembly

Bolted Manifold for

Quick & Easy Maintenance

Patented Ring Construction

- No Bolts Needed

Page 15

— Prices Subject to Change Without Notice —

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

RF HC88000M(Hose not Included)

Reelcraft Hose ReelsHand Crank / 12 Volt

Hose Max. Part No. Style Capacity PSI Wt. Net Ea.RF HC86000M Hand Crank 3/8” x 150’ 3000 22 lbs. $ 308.00 RF HC88000M Hand Crank 1/2” x 100’ 3000 22 lbs. 328.00 RF PWHC86000H Hand Crank 3/8” x 150’ 5000 22 lbs. 328.00 RF PWHC88000H Hand Crank 1/2” x 100’ 5000 22 lbs. 347.00

D

Reelcraft Hand & Electric Rewind Hose Reels are designed for a wide range of applications such as lawn and turf, pressure washing, pest control, industrial and many more. Available in Hand Crank or with 12-Volt motors. Different styles and pressure ratings for most any hose storage requirement.

All reels feature heavy-duty steel construction with powder-coated finish and lock pins to prevent de-spooling when not in use. Different frame styles can be used for fixed or mobile applications. Hoses Are Not Included. All reels are made in the USA.

HC & PWH Series Hose Reels

HC and PWH Reels feature compact, single cast aluminum base rated to 40,000 PSI tensile strength • Ball bearing swivel with Aflas seal • Adjustable drag screw • Rated to 212° F. • Hand crank only • Compact footprint • Dimensions are 21-1/2” High x 19” Deep x 11-1/2” Wide.

Compact, Single Cast Aluminum Base

RF H18000M

D

H Series Hose Reels

H Series Reels are economical, medium-duty that can be used for plant or field use. Rated to 3000 PSI and 210° F. Steel construction and dual base assembly is standard. Hand crank only.

H16000M and H18000M are 19” High x 20” Deep x 18” Wide.

H29000M is 19” High x 20” Deep x 24” Wide.

Economical, Medium Duty

Hose Max. Part No. Style Capacity PSI Wt. Net Ea.RF H16000M Hand Crank 3/8” x 300’ 3000 34 lbs. $ 224.00 RF H18000M Hand Crank 1/2” x 200’ 3000 34 lbs. 214.50 RF H29000M Hand Crank 3/4” x 150’ 3000 34 lbs. 255.00

Hose Max. Dimensions Wt.Part No. Style Capacity PSI High Deep Wide Lbs. Net Ea.RF CA32106M Hand Crank 1/2” x 100’ 3000 20” 18” 20” 42 $ 229.00 RF CA32118M Hand Crank 1/2” x 325’ 3000 20” 18” 32” 52 242.00 RF CA33118M Hand Crank 3/4” x 175’ 3000 20” 18” 32” 52 308.00 RF EA32118L12D 12 Volt DC 1/2” x 325’ 1000 20” 18” 30” 68 549.00 RF EA33118L12D 12 Volt DC 3/4” x 175’ 1000 20” 18” 30” 75 585.00

CA (Hand Crank) & EA (12-Volt) Reels

CA (Hand Crank) and EA (12-Volt) Reels are designed for rugged, heavy-duty applications. All bolted, unitized construction. Full flow swivel and heavy gauge steel frame. Available in hand crank or 12 -Volt motor design. Aflas seals. Rated to 250° F. and 1000 or 3000 PSI as noted.

Designed for Rugged, Heavy-Duty Applications

RF EA33118L12D

D

Page 16

— Prices Subject to Change Without Notice —

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Modulating Atmospheric Boilers from Raypak are ideal for hot water storage or for floor heat and snow melt applications. Non-ferrous (copper, bronze and porcelain) waterways will not rust and operate at temperatures as low as 105° F. without condensation. Copper finned design allows for use with less expensive, non-barrier radiant tubing vs. traditional cast iron boilers. Efficiency rating is 82%. Modulating design increases efficiencies by using more or less gas as demand changes. Thermal shock-proof heat exchangers are a standard feature. Exterior coating is a UV inhibited, powdercoat finish for years of durability.

MODULATINGATMOSPHERIC

BOILERS

Rugged All Bronze Headersresist corrosion and are easily removed for inspection or service. Cast iron headers with porcelainized waterways are available.

Combination Modulating Valvesautomatically size boiler to loads as low as 20% of full input for maximum fuel economy.

24 Volt Controlsare totally enclosed for protection. Door is easily removed for inspection and service.

Floating Return Headerimmunizes heat exchanger to thermal shock.

Corrosion Resistant Steelfittings are brush-galvanized against rust. Heat shields are corrosion-resistant steel. Jacket has Polytuf powder coat finish.

Tube Sheet & “O” Ring Constructioneliminates the repair and maintenance problems associated with rolling tubes directly into a casting.

Interlocking Refractory Panelswith sealed corners reduce radiation losses.

Stainless Steel Burnersmaintain precise combustion at all firing rates, burn quietly and won’t clog or corrode.

Slide Out Burner Trayallows easy inspection and service.

Spark-to-Pilot Ignitionthe most dependable ignition method available.

Finned Copper Tube Heat Exchangersingle bank, straight through design delivers lowest pressure drop. Integral fins have 10 times the heat transfer surface of plain tubes.

Sewer / Jetter Hoses

SCHIEFFER Sewer / Jetter Hoses. For cleaning and debris removal from sewer lines. Designed for medium and high pressure jetting and sewer cleaning. Thermoplastic cover is oil, weather, ozone and abrasion-resistant. Thermoplastic tube and cover with two layers of polyester textile braid that is chemically bonded for long life. 2.5 to 1 burst to operating pressure. All hoses are fitted with male MPT solid x Male MPT swivel ends matched to hose size. Rated from -40° to +160° F. Made in the USA. Part No. Color I.D. O.D. PSI Length Wt. Net Ea.NP 68160 Orange 3/4” 1.27” 2500 400’ 114 lbs. $ 897.00 NP 68161 Orange 3/4” 1.27” 2500 500’ 142 lbs. 1098.00 NP 68162 Orange 3/4” 1.27” 2500 600’ 170 lbs. 1298.00 NP 68163 Orange 1” 1.54” 2500 400’ 160 lbs. 1120.00 NP 68164 Orange 1” 1.54” 2500 500’ 200 lbs. 1389.00 NP 68165 Orange 1” 1.54” 2500 600’ 240 lbs. 1645.00

Part No. Color I.D. O.D. PSI Length Wt. Net Ea.NP 68134 Blue 3/4” 1.25” 3000 500’ 146 lbs. $ 1098.00 NP 68135 Blue 3/4” 1.25” 3000 600’ 175 lbs. 1245.00 NP 68136 Blue 1” 1.53” 3000 500’ 207 lbs. 1315.00 NP 68137 Blue 1” 1.53” 3000 600’ 247 lbs. 1645.00

Part No. Color I.D. O.D. PSI Length Wt. Net Ea.NP STH23 Green 1/2” 0.89” 4000 400’ 75 lbs. $ 559.00 NP STH24 Green 1/2” 0.89” 4000 500’ 93 lbs. 698.00 NP STH28 Green 1/2” 0.89” 4000 600’ 112 lbs. 829.00

For Cleaning & Debris Removal from Sewer Lines

D

D

Call Us for Details !

Page 17

— Prices Subject to Change Without Notice —

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

in 4 oz. bottlesMulti-Purpose Cleaner

Multi-Purpose Auto Cleaner from Armorall is a powerful cleaning solution for all auto surfaces. Flat 4 oz. spray bottle fits standard vending machines. Sold in cases of 24 bottles. Machine decals are available no charge.

Net Price Part No. Per Case of 24IM 17233 Multi-Purpose Cleaner, 4 oz. Bottles .......... $ 38.75IM 17233L 35” Single Decal ......................................... No Charge IM 17233S 10” Decal for Triple Machine ....................... No Charge

5% Discount on 5 + Assorted Cases of any Vending Products

in 4 oz. bottlesGlass Cleaner

Auto Glass Cleaner from Armorall leaves a streak-free shine. Ammonia-free formula is safe for all automotive glass. Removes filmy residue and road grime. Flat 4 oz. pump spray bottle fits standard vending machines. Sold in cases of 24 bottles. Machine decals are available no charge.

Net Price Part No. Per Case of 24IM 17234 Glass Cleaner, 4 oz. Bottles ....................... $ 38.75IM 17234L 35” Single Decal ......................................... No Charge IM 17234S 10” Decal for Triple Machine ....................... No Charge

5% Discount on 5 + Assorted Cases of any Vending Products

in 4 oz. bottlesExtreme Tire Shine

Extreme Tire Shine from Armorall. Cleans tires and leaves a shine that lasts for weeks. Protects against fading and cracking. Applies with a smooth, even application. Flat 4 oz. pump spray bottle fits standard vending machines. Sold in cases of 24 bottles. Machine decals are available no charge.

Net Price Part No. Per Case of 24IM 17233 Tire Shine, 4 oz. Bottles ............................. $ 38.75IM 17236L 35” Single Decal ......................................... No Charge IM 17236S 10” Decal for Triple Machine ....................... No Charge

5% Discount on 5 + Assorted Cases of any Vending Products

in 4 oz. bottlesWheel Cleaner

Wheel & Tire Cleaner from Armorall. Dissolves brake dust, grease and road grime. Safe for all factory and aftermarket coated wheels. Flat, 4 oz. pump spray bottle fits standard vending machines. Sold in cases of 24 bottles. Machine decals are available no charge.

Net Price Part No. Per Case of 24IM 17235 Wheel Cleaner, 4 oz. Bottles ....... $ 38.75IM 17235L 35” Single Decal .......................... No Charge IM 17235S 10” Decal for Triple Machine ........ No Charge 5% Discount on 5 + Assorted Cases of any Vending Products

D

D

DD

D

D

D

D

Air Fresheners

Air Freshener Vending Packs from ArmorAll. Five great scents to increase your vending sales. Sold in cases of 72 wrapped, star burst cards. Decals available free of charge. Vending packs, not carded.

Case/72 Part No. Scent Color Net Ea.IM 17065 New Car Grey $ 35.50 IM 17066 Cool Mist Blue 35.50 IM 17067 Vanilla Yellow 35.50 IM 17068 Wild Berry Red 35.50 IM 17069 Mountain Air Green 35.50IM 20049 Single Column Machine Decal No Charge IM 20040? Fragrance Insert, Specify No Charge

5 Great Scents to Increase Your Vending Sales !

D

D

D

D D

20049 & 200405

Polypropylene Micro Valves

Part No. Description Net Ea.TK LV025V 1/4” FPT Micro Valve ..................... $9.57 TK LV038V 3/8” FPT Micro Valve ..................... 9.57 TK LV050V 1/2” FPT Micro Valve ..................... 10.20 TK LV025MTV 1/4” FPT x 1/4” MPT Micro Valve ... 9.57 TK LV038MTV 3/8” FPT x 3/8” MPT Micro Valve ... 9.57 TK LV050MTV 1/2” FPT x 1/2” MPT Micro Valve ... 10.20 TK LVHB025V 1/4” Hose Barb Micro Valve ........... 9.57 TK LVHB038V 3/8” Hose Barb Micro Valve ........... 9.57 TK LVHB050V 1/2” Hose Barb Micro Valve ........... 10.20 TK LVHB075V 3/4” Hose Barb Micro Valve ........... 10.20

• 90° Rotating Handle, 150 PSI W.P.

• Precision Molded Polypropylene Reinforced with Fiberglass

• Standard Viton® Seats & O-Rings

LV025V

LVHB025V

LV025MTV

D

D

D

SERVICE & REPAIRS Did you know? We can

service almost every brandof pump we sell in our catalog.

Call us at 1-800-228-9666(Omaha, NE) for a quote!

Page 18

— Prices Subject to Change Without Notice —

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Inlet/Outlet Purge Max. Part No. Ports Port Mesh Micron Flow Length Net Ea.DM 131344 3/4” MPT 1/2” MPT 60 250 25 GPM 11-3/4” $ 51.95 DM 131345 3/4” MPT 1/2” MPT 100 150 25 GPM 11-3/4” 51.95 DM 131348 1” MPT 1/2” MPT 60 250 39 GPM 11-3/4” 51.95 DM 131349 1” MPT 1/2” MPT 100 150 39 GPM 11-3/4” 51.95 DM 131554 1-1/2” MPT 3/4” MPT 60 250 78 GPM 15-1/4” 69.95 DM 131555 1-1/2” MPT 3/4” MPT 100 150 78 GPM 15-1/4” 69.95 DM 131557 2” Flange 3/4” MPT 60 250 150 GPM 25” 339.50 DM 131558 2” Flange 3/4” MPT 100 150 150 GPM 25” 339.50

TwistIIClean® Filter/Strainers

LAKOS Inline Filter/Strainers. Patented “Twist-to-Clean-Design”. Ideal for industry, agriculture, water well, irrigation, misting systems, etc. Just a 1/4 turn of the handle starts the reverse flushing action which backwashes from inside out. Debris is cleaned off the screen and flushed out the bottom purge port. Polypropylene/acrylic body. EPDM top seal, Viton® bottom seal. Stainless steel screen. MPT or flange ports as noted. Rated to 100 PSI and 120° F.

Features:

• No Disassembly Required to Clean

• Completely Flushes and Cleans in Just 20 Seconds

• No Need to Turn Off Liquid Flow

• No Tools Needed for Cleaning

Purge Exit

3/4”1”1-1/2”Filters

MPT Ports

Purge Port

2” Filters

Flange Ports

Purge Port

Over 200% Larger Stainless Steel Screen Area lasts for years, collects maximum debris between cleanings. Clear bowl shows when filter needs cleaning.

Short Handle Faucets

Gate & Drum Faucets for non-flammable, viscous liquids stored in non-pressurized drums or barrels. Excellent choice for dispensing heavy oils, light grease even molasses and honey. Available with short or long handles. 45 to 60 degree discharge allows for optimum flow control. Locking handle design is standard on sizes up through 2”. Made in the USA.

Short Handle Faucets. Cast iron body, (cast or aluminum on 3/4” and 2” sizes) 2” metal stamped handle. Available from 3/4” to 4” sizes. Locking handle up through 2” size. Manual open and close. Ports are male pipe thread.

GATE & DRUM FAUCETS

Part No. MPT Size Wt. Net Ea.SY 71075 3/4" 1.5 lbs. $ 32.95 SY A71075 * 3/4” 1.0 lbs. 45.95 SY 72100 1” 2.0 lbs. 41.95 SY 73125 1-1/4” 2.4 lbs. 38.95 SY 74150 1-1/2” 2.9 lbs. 39.95 SY 75200 2” 3.2 lbs. 42.95 SY A75200 * 2” 1.75 lbs. 59.90 SY 39300 3” 6.7 lbs. 115.00 SY 40400 4” 15 lbs. 229.00* Aluminum body with plated metal handle.

Long Handle FaucetsLong Handle Faucets. Cast iron body with 4” long handle. Available in 1-1/2” to 3” sizes. Locking handle on 1-1/2” and 2”. Manual open and close. Ports are male pipe thread.

Part No. MPT Size Wt. Net Ea.SY 21150 1-1/2" 4.3 lbs. $ 67.95 SY 23200 2” 4.7 lbs. 69.95 SY 10300 3” 10 lbs. 115.50

Self-Closing Faucets

Long Handle Faucets. Cast iron body. Available in 3/4” size with 2” long handle or 2” size with 4” long handle. Automatically closes upon release of handle. Ports are male pipe thread.

Part No. MPT Size Wt. Net Ea.SY S71075 3/4" 1.5 lbs. $ 48.75 SY S23200 2” 6.5 lbs. 119.50

71075 Cast Iron

A71075 Aluminum

D

D

21150

D

D

Page 19

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Waterproof Jackets & Bibs

PVC Jackets and Bibs fit the need when outdoor or indoor work requires waterproof clothing or you work in inclement weather. Also, an ideal choice for washing and cleaning applications such as truck wash, car wash and mobile cleaning. Available in standard weight (35mm) or heavy weight (50mm) construction. Sold in high visibility individual jackets and bibs as noted. Available in Large, X-Large and XX-Large sizes.

Part No. Description Size Color Net Ea.BS 3PR0350N 35mm High Vis Jacket L Fluorescent Green $ 14.50 BS 3PR0350NX 35mm High Vis Jacket XL Fluorescent Green 14.50 BS 3PR0350NXL 35mm High Vis Jacket XXL Fluorescent Green 14.25 BS 3PR0351N 35mm High Vis Bib L Fluorescent Green 8.95 BS 3PR0351NX 35mm High Vis Bib XL Fluorescent Green 8.95 BS 3PR0351NXL 35mm High Vis Bib XXL Fluorescent Green 8.95

10% Discount On 20+ Not Assorted

3PR0350N is a polyester-lined, High-Vis Jacket. 35mm PVC construction. Fluorescent Green with reflective tape on chest and sleeves. Features detachable hood, non-conductive, non-corrosive snaps on front and sleeve cuffs.

3PR0351N is a polyester-lined, High-Vis Bib Overall. 35mm PVC construction. Fluorescent Green with reflective tape on legs. Features non-corrosive snaps and adjustable elastic suspenders.

3PR0500Y is a polyester-lined Jacket. 50mm PVC construction. Features zipper front, covered metal snaps, attached hood, inside cargo pockets, underarm vents and reinforced elbows. Color is yellow, but moss green is also available.

Part No. Description Size Color Net Ea.BS 3PR0500Y 50mm Jacket L Yellow $ 12.95 BS 3PR0500YX 50mm Jacket XL Yellow 12.95 BS 3PR0500YXL 50mm Jacket XXL Yellow 12.95

10% Discount On 20+ Not Assorted

Part No. Description Size Color Net Ea.BS 3PR0501Y 50mm Bib L Yellow $ 13.75 BS 3PR0501YX 50mm Bib XL Yellow 13.75 BS 3PR0501YXL 50mm Bib XXL Yellow 13.75

10% Discount On 20+ Not Assorted

3PR0501Y is a polyester-lined Bib Overall. 50mm PVC construction. Features elastic suspenders, inside chest pocket, hook and loop waist closure, reinforced knees and seat. Color is yellow, but moss green is also available.

D

D

Material Handling Gloves

Cut Resistant, Material handling Gloves from BLACK MAMBA. Made from Ultra-High Molecular Polyethylene Fiber with Polyurethane coating for superior grip and added protection. High tensile strength relative to weight. Tight knit wrist and breathable back means great comfort and dexterity.

Cut Resistant

* Per Pair Part No. Description Net Ea.BM CTR130 X-Large Gloves $ 11.95

* 5% Discount for 12 Pairs

Typical uses include general material handling, HVAC, sheet metal or glass handling, warehouse farm, ranch and industry. ANSI cut rating of 5 and abrasion rating of 3. Sold by the pair

D

Reuseable Neoprene Gloves

Neoprene is one of the best choices for handling a variety of acids and alkalis. Also ideal for use with solvents, herbicides, pesticides, petroleum based solutions and oils. A very good choice for use with NH3 ammonia and LP gas. Offers superior strength and flexibility along with abrasion and cut resistance. Available in 13” and 18” lengths.

Superior Strength & Flexibility

Case/144 Bag/12 Per PairPart No. Size Thickness Discount Discount Net Ea.BS 2919 Large 19-mil 20% (144) 10% (12) $ 3.25 BS 2919XL X-Large 19-mil 20% (144) 10% (12) 3.25

Case/36 Bag/12 Per PairPart No. Size Thickness Discount Discount Net Ea.BS 2539L Large 19-mil 20% (36) 10% (12) $ 13.50

Series 2919 is a flock lined glove with 13-1/2” length for partial forearm protection. Available in Large and X-Large sizes. Sold by the pair, bag or case. Color is Black.

Series 2539 features an absorbent flannel lining for added comfort. 18” heavy duty gauntlet cuff offers excellent protection and tensile strength. Superior grip on wet or dry surfaces. Available in Large only. Sold by the pair, bag or case. Color is Black.

2539L

2919 2919XL

D

D

— Prices Subject to Change Without Notice —

Page 20

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com

Truck Mount Vacuum Hose

Part No. I.D. Length Color Net Ea.FX TM1225BL 1-1/2” 25’ Blue/Black $ 29.85 FX TM1225G 1-1/2” 25’ Grey/Black 29.85 FX TM250BL 2” 50’ Blue/Black 75.75 FX TM250G 2” 50’ Grey/Black 75.75 FX TM2100BL 2” 100’ Blue/Black 167.00 FX TM2100G 2” 100’ Grey/Black 167.00

Heavy Duty Crush-Proof Hose

TM1225BL

Heavy-Duty, Crush-Proof Vacuum Hoses designed for the rigors of truck mount carpet cleaning machines or industrial vacuum applications. Smooth, flat exterior reduces hand ups on walls, floors, furniture or equipment. Smooth interior for faster material flow. I-helix construction is abrasion-resistant for longer life. Poly welded black cuffs on each end are standard. 1-1/2” x 25’ leader hoses and 2” x 50’ or 2” x 100’ main hoses. Available in Grey/Black or Blue/Black colors.

D

Spring Rewind Pressure Washer Reels

Spring Rewind Pressure Washer Reels from Reelcraft. High quality steel construction with red powder-coated finish. Ideal for use in shops and garages. Rated to 5,000 PSI and 400° F. Designed for 3/8” I.D. hose, (not included). Fast, automatic return of hose into reel drum keeps hose out of the way and off the floor.

PW81000OHP (hose not included)

D

Hose Max. Part No. Capacity PSI Wt. Net Ea.RF PW7600OHP 3/8” x 50’ 5,000 43 lbs. $ 345.00 RF PW81000OHP 3/8” x 100’ 5,000 86 lbs. 499.00

Hand Carry Hose ReelEconomical Hose Reel on Hand Carry Frame. Great for pressure washing or sewer jetting. Powder-coated reel and carry handle base. Rated to 5,000 PSI and 185° F. Capacity is 100’ of 3/8” hose (not included). Whip inlet hose is included.

Hose Max. Part No. Capacity PSI Wt. Net Ea.IP 2100357 3/8” x 100’ 5,000 20 lbs. $ 147.00

D

WIPESSold in 100 Packs per Case

Per Case Part No. Product Net Ea.IM 17240 Glass Cleaner Wipes, 100/Case ........ $ 72.95 IM 17238 Original Protectant Wipes, 100/Case . 72.95 IM 17237 Leather Clean & Conditioner Wipes .. 72.95 IM 17239 Cleaning Wipes .................................. 72.95

5% Discount for 5 Assorted Vending Items

The Most Popular Armorall Products Are Now Available in Disposable Towel Wipes! All four products are packaged 2 wipes per pack and 100 packs per case. Glass Cleaner, Protectant, Leather Conditioner and General Cleaning wipes are all available. Wipes are 7” x 8”.

17240 Glass Cleaner

17238 Original Protectant

17237 Leather Cleaner

17239 Cleaner Wipes

17240 Glass Cleaner features no-streak, no residue formula for extra clean windows.

17238 Original Protectant cleans, shines and guards against UV damage.

17237 Leather Wipes clean, condition and protects all leather products.

17239 Cleaning Wipes feature powerful cleaners for all auto surfaces.

High Flow Trigger Wands

High Flow Trigger Wands from General Pump. Shock-proof plastic housings. Brass, stainless, buna and teflon components. Minimum load loss. Ergonomic design minimizes fatigue. Rated to 210° F. YG1732 has 1/2” ports. YG2953B has 3/4” inlet x 1/2” outlet. Y305 lances are 1/2” stainless construction with side handle and 1/4” nozzle port.

Part No. Max. Flow Max. PSI Wt. Net Ea.IP YG1732 32 GPM 1740 2.75 lbs. $ 110.00 IP YG2953B 53 GPM 2900 3.00 lbs. 262.00 IP Y30531 53 GPM 8000 1.70 lbs. 153.00 IP Y30551 53 GPM 8000 2.00 lbs. 242.00

D

— Prices Subject to Change Without Notice —

Page 21

POWER WASH NEW ITEMS FOR 2014/2015 !

July 2014

DULTMEIER SALES • OMAHA, NE • (800) 228-9666 • Fax: (402) 333-5546 • DAVENPORT, IA • (800) 553-6975 • Fax: (563) 386-5448 • e-mail: dultmeier@dultmeier.com

Visit Our Website at www.dultmeier.com— Prices Subject to Change Without Notice —

Bendable Bolt-Down Bollards

New! Flexible Bollard Option. No moving par ts. Tough, durable plastic resists low mph impacts. Flexes and retains shape memory, returns to height and shape after impact. Bolt down feature allows for placing wherever needed. 4” Diameter x 41” high. Only available in gray color with white reflective top stripe.

Part No. Size Wt. Net Ea.DB TRAD4 4” D x 41” H 12 lbs. $ 285.00

D

Steel Bolt-Down Bollards

Save time and expense by installing bolt-down bollards. Protect equipment and buildings. Ideal for water and gas meters, wash bays, dock doors, etc. No core or excavation needed. Powder-coated, steel construction. 4” O.D. poles have 8” x 8” base with 3/4” corner holes. 6” O.D. poles have 10” x 10” base with 3/4” corner holes. All units are painted safety yellow.

Part No. Size Wt. Net Ea.DB BDB436 4” D x 36” H 40 lbs. $ 79.50 DB BDB442 4” D x 42” H 45 lbs. 123.50 DB BDB642 6” D x 42” H 85 lbs. 196.00

Save Time and Expense !

D

D

Spring Rewind Garden Center ReelsReelcraft Spring Rewind Reels are designed to be centrally located for watering and washdown applications in garden centers, garages, shops, etc. Industrial grade steel construction features powder-coated, corrosion-resistant red or white finish as shown. Guide arm is adjustable for a variety of positions. All models include bumper stop and hose. Hoses are standard with 3/4” Male garden hose fittings. Rated to 250 PSI and 150° F.

Part No. Color Hose Wt. Net Ea.RQ 7850OLPSW57 Red 1/2” x 50’ 51 lbs. $ 343.50 RQ 83050OLP107 White 5/8” x 50’ 89 lbs. 529.00 RQ GC7925OLP Red 3/4” x 25’ 53 lbs. 427.00

RQ 7850OLPSW57 RQ 83050OLP107

D

D

Eye ProtectionSafety Glasses for eye protection in plants, warehouses, chemical facilities and many other industrial applications. Available in clear or gray. Semi-rimless design features hard coat lens and anti-scratch coating. Adjustable temples for one size fits all. Built-in side shields. Clear is CE EN 166 Certified.

Part No. * Std. Pkg. Net Ea.WL 250-24000 Clear Safety Glasses 144 $ 1.50 WL 250-24001 Gray Safety Glasses 144 1.50

* 20% Discount for Case of 144 Not Assorted

250-24000

250-24001

D

D