2013 rubi general catalogue
DESCRIPTION
You can find all RUBI products in this digital catalogue.TRANSCRIPT
www.rubi.com
GENERAL CATALOGUE
2013
MANUAL TILE CUTTERSCUTTERS ACCESSORIESCUTTERS FOR BUILDING MATERIALS
TROWELS, NOTCHED TROWELS, BRICK TROWELS, FLOATS, RUBBER TROWELS AND SPATULAS.MARKERS, CHISELS, TEMPLATES AND ACCESSORIES FOR TILINGMALLETS, NIPPERS AND ELECTRIC JOINT APPLICATORS FOR MORTAR
LEVELING, MEASUREMENT AND ADJUSTMENT SYSTEMSTILE SPACERS.TILE LEVEL.
ELECTRIC CUTTING AND MITERING SAWSCIRCULAR SAW, GRINDER AND WALL CHASERDIAMOND AND ABRASIVE BLADES
ELECTRIC MIXERSMIXING PADDLES
RUBINET: PRODUCTS AND ACCESSORIES FOR CLEANING AND LAYING TILESCLEANERS AND POLISHERSPALBOX AND EXHIBITORS / INDEX BY REFERENCES
TOOLS FOR DRILLING TILES, STONEWARE, MARBLE, GRANITE, AND OTHER MATERIALS.
PERSONAL EQUIPMENT FOR BUILDING PROFESSIONALS
MANUAL CUTTING AND MECHANIZATION OF CERAMIC TILES
ELECTRIC CUTTING AND MECHANIZATION OF CERAMIC TILES
PERFORATION
MIXING
TOOLS FOR LAYING TILES AND FINISHINGS
SAFETY EQUIPMENT
CLEANING AND MAINTENANCE
ACCESORIES FOR LAYING TILES AND FINISHINGS
201310-
49
50-
85
86-
97
98-
105
106-
146
147-
160
161-
168
169-
218
The company Germans Boada, S.A., RUBI was created in 1951 with the invention by the Boada brothers of a manual cut-ter for hydraulic mosaic. This new tool, christened with the name of RUBI, ser-ved as a stepping stone for developing a strong company that currently designs, manufactures and distributes equipment and tools for cutting and laying tiles.
Its international vocation, very pre-sent since its creation, makes Germans Boada a now global company with a presence in over 100 countries and an extensive network of branch and participated companies worldwide.
The group headquarters is located in Rubi, near Barcelona, and the logistics and industrial center in Santa Oliva (Ta-rragona). In the latter facilities, recently expanded to 20,000 m2, there are the productive and logistics center, equipped with an automated warehouse and the latest technology in order management.
These resources, combined with optimal inventory management, grant a daily ser-vice to major markets with tight deadlines, thus satisfying the current needs of the various distribution channels worldwide.
RUBI, service guarantee
BRANCH COMPANY
BRANCH OFFICE
CONCESSIONAIRE
DISTRIBUTOR
Besides the guaranteed international service of the group, RUBI offers exten-sive support to the distribution channel; sales training, demonstrations in outlets and construction sites using a fleet of mobile units, fairs, promotional activity, new deployment supports, communica-tion media and social networking with an active presence on the Internet. Some of the actions are intended to ensure RUBI good product turnover. Howe-ver, much of the success of the RUBI products is the result of the strength and brand recognition among profes-sionals worldwide, who regard RUBI as a quality assurance backed by a highly reliable international customer service.
RUBI Products:Constant innovation to serve the user
Since its inception, RUBI has always been a brand specialized in quality products and services for cutting, placement, main-tenance and cleaning of the ceramic.
The RUBI range, evolving accor-ding to changes in materials and their applications, offers construction pro-fessionals a range of specialized and technically advanced products that in-cludes tools and machines needed for a good placement with perfect finishes.
The objective is to maintain the current RUBI technological leadership through a strong commitment to research, inno-vation, design and development. For this reason and as a sign of the spirit of inno-vation and continuous improvement, the group counts with the RUBI TECHNO-LOGY CENTER, located at the Group Headquarters, near Barcelona, in which a multidisciplinary team of engineers has the most advanced technological means.
In this environment, the RUBI pro-ducts are created with design and creativity. The priority is to meet the real needs of professionals in the pla-cement of tiles in the most practi-cal, durable and competitive fashion.
In addition, the criteria of industrial design related to ergonomics and functionality is added to that of sustainability and low im-pact on the environment, as design requi-rements of RUBI products. As a result, the products are very respectful of nature and its components are easily recyclable.
Furthermore, contributions of com-mercial teams all over the world are added to the end-user’s participation in the creation and design of innovati-ve products. The direct participation of professionals of different nationalities in the various stages of definition, crea-tion and development is a key factor for the success of the RUBI products.
Key Element in the relationship bet-ween RUBI and the user, the RUBI Club, the first club of construction professionals in the world, continues to grow. With members in over 70 countries, has already become a large community of professionals with a high level of involvement and participation.
RUBI Club members receive regular free information and documentation of the industry of great interest for continuous recycling and which is very useful to update their knowledge on new materials, tools and applications. The partners also have a free warran-ty extension in some key RUBI ranges.
RUBI’s relationship with its part-ners is growing rapidly thanks to new technologies and the large par-ticipation of professionals. RUBI’s page on Facebook is already a highly dynamic bidirectional communica-tion channel, as its own channel on YouTube, which receives thousands of visitors every day. This activity in social networks should be added to the permanent traffic on www.rubi.com which is available in 10 languages .
This 2013, the RUBI Club and all its members initiate a plan of cooperation with various foundations and NGOs to work together in solidarity pro-jects in developing countries in South
America, Africa and Asia. Under the theme “Building Together”. The RUBI Club wants to harness the power of thousands of partners around the glove to help build a better world.
RUBI CLUB, an international association of great dynamism
www.rubi.com
CLUB000000
VICTOR SANCHO
www.rubi.com
CLUB000000VICTOR SANCHO
www.rubi.com
CLUB000000VICTOR SANCHO
w
ww.rubi.com
YE
AR
Warranty
AÑOS Garantía
*
*The free extension of warranty is exclusive for members in certain ranges.
More information page. 217.
RUBI with Professional Training
The RUBI brand has an international reputation thanks to the unconditio-nal support of the construction profes-sionals worldwide. Since its inception, users have conveyed great confidence to RUBI, reinforcing the brand in all areas.
In its clear orientation to the user, RUBI is committed to forming partnerships with schools and professional associations around the world and makes available to its customers the RUBI Professional Building School, located next to its logistics center.
Finally, in order to dignify the building trades and show the evolution of the tools, RUBI has the Space Theme “Construction Tools”, visited annually by more than 4,000 people.
MANUAL CUTTING AND
MECHANIZATIONOF CERAMIC TILES
MANUAL TILE CUTTERS
CUTTERS ACCESSORIES
CUTTERS FOR BUILDING MATERIALS
12
Light and functional tile cutter.
For intensive cutting of ceramic tile, ideal for Wall and Floor tiles.
TS
• Useful breaker for a greater speed of work. 1.
• Double guide for better visibility of the scoring and cutting line.
2.
• Oversized base for a better comfort and stability during use.
3.
• Adaptable scoring wheels to every material to maximize performance and cutting quality.
4.
• Reinforced base and ergonomic shapes.• High performance single point breaker.• Chromed steel guides, rectified, calibrated and antirust treatment.• Lateral stop for repetitive straight and 45º cuts. Right and left functional.• Interchangeable scoring wheels from Ø1/4” (6mm) to 7/8” (22mm).• With Ø1/4” (6mm) & 13/32” (10mm) scoring wheels and transport case included.• Direct view of the scoring and cutting line .
13
REF
TS-40 18940 2 32 16 15/16”43 cm
11 13/16x11 13/16”30x30 cm
1/4-19/32”6-15 mm
882 Lb 400 kg
•11 Lb 5.0 kg
14.3 Lb 6.5 kg
TS-50 18950 2 24 22 7/16”57 cm
15 3/4x15 3/4”40x40 cm
1/4-19/32”6-15 mm
882 Lb 400 kg
•15.4 Lb 7.0 kg
20.9 Lb 9.5 kg
TS-60 18960 2 20 25 31/32”66 cm
18 1/8x18 1/8”46x46 cm
1/4-19/32”6-15 mm
882 Lb 400 kg
•20.9 Lb 9.5 kg
28.7 Lb 13.0 kg
Ref. Accessories
18980 Maintenance kit
TS professional cutters
1 2
3
4
19/32”15 mm
882 Lb 400 kg
14
Light and functional tile cutter with high performance breaker.
For intensive cutting of ceramic tile, ideal for Porcelain tiles.
TS-PLUS
• Powerfull breaker for cutting high hardness materials.
1.
• Double guide for better visibility of the scoring and cutting line.
2.
• Oversized base for a better comfort and stability during use.
3.
• Adaptable scoring wheels to every material to maximize performance and cutting quality.
4.
• Reinforced base and ergonomic shapes.• High performance single point breaker, with 750Kg of preasure.• Chromed steel guides, rectified, calibrated and antirust treatment.• Lateral stop for repetitive straight and 45º cuts. Right and left functional.• Interchangeable scoring wheels from Ø1/4” (6mm) to 7/8” (22mm).• With Ø1/4” (6mm) & 13/32” (10mm) scoring wheels and transport case included.
15
REF
TS-40-PLUS 16940 2 32 16 15/16”43 cm
11 13/16x11 13/16”30x30 cm
1/4-19/32”6-15 mm
1653 Lb 750 kg
•11 Lb 5.0 kg
14.3 Lb 6.5 kg
TS-50-PLUS 16950 2 24 22 7/16”57 cm
15 3/4x15 3/4”40x40 cm
1/4-19/32”6-15 mm
1653 Lb 750 kg
•15.4 Lb 7.0 kg
20.9 Lb 9.5 kg
TS-60-PLUS 16960 2 20 25 31/32”66 cm
18 1/8x18 1/8”46x46 cm
1/4-19/32”6-15 mm
1653 Lb 750 kg
•20.9 Lb 9.5 kg
28.7 Lb 13.0 kg
TS-70-PLUS 16970 1 18 29 17/32”75 cm
20 7/8x20 7/8”53x53 cm
1/4-19/32”6-15 mm
1653 Lb 750 kg
•23.1 Lb 10.5 kg
32 Lb 14.5 kg
Ref. Accessories
18980 Maintenance kit
TS-PLUS professional cutters
1
2
3
4
19/32”15 mm
1653 Lb 750 kg
16
1
2
3
4
TF professional cutters
TFFor intensive cutting of ceramic tiles, ideal for Wall and Floor tiles.
• Wooden base with waterproof protection for greater durability. 1.
• Oversized lateral stop and direct measurement for easier and more accurate cuts. 2.
• Double guide for better visibility of the scoring and cutting line. 3.
• Adaptable scoring wheels to every material to maximize performance and cutting quality. 4.
• Chromed and rectified steel guides, with anti-corrosion treatment.• With high-performance single point breaker.• Base accessory for large formats.• Interchangable scoring wheels from Ø1/4”(6mm) to 7/8” (22mm).• Ø5/16” (8mm) scoring wheel included.
REF
TF-40 15970 1 35 16 15/16”43 cm
11 13/16x11 13/16”30x30 cm
1/4-19/32”6-15 mm
882 Lb 400 kg
15.4 Lb 7.0 kg
TF-60 15980 1 25 25 31/32”66 cm
18 1/8x18 1/8”46x46 cm
1/4-19/32”6-15 mm
882 Lb 400 kg
25.4 Lb 11.5 kg
TF-60 with case 15981 1 12 25 31/32”66 cm
18 1/8x18 1/8”46x46 cm
1/4-19/32”6-15 mm
882 Lb 400 kg • 25.4 Lb
11.5 kg34.2 Lb 15.5 kg
TF-90 15984 1 25 36 5/8”93 cm
25 19/32x25 19/32”65x65 cm
1/4-19/32”6-15 mm
882 Lb 400 kg
31 Lb 14 kg
Ref. Accessories
18980 Maintenance kit
Robust and functional tile cutter.
19/32”15 mm
882 Lb 400 kg
17
1
23
4
TM professional cutters
TMFor intensive cutting of ceramic tiles, ideal for Porcelain tiles and Extruded tiles.
• Powerfulbreaker,adaptabletothethicknessofeachceramicforincreasedseparationefficiency. 1.
• Oversized base with lateral supplements for large format tiles. 2.
• Double guide for better visibility of the scoring and cutting line. 3.
• Adaptable scoring wheels to every material to maximize performance and cutting quality. 4.
• For large ceramic formats and thicknesses.• With high performance single point breaker, adjustable from 1/4” (6mm) to 27/32” (21mm).• Chromed steel guides, rectified and calibrated, antirust treatment.• Lateral stop for repetitive straight and 45º cuts.• Interchangeable scoring wheels Ø5/16” (8mm) to Ø7/8” (22mm). • With Ø13/32” (10mm) and Ø3/4” (18mm) scoring wheels and transport case included.
REF
TM-70 16916 1 10 27 9/16”70 cm
19 11/16x19 11/16”50x50 cm
1/4-13/16”6-21 mm
2205 Lb 1000 kg • 34.2 Lb
15.5 kg45.2 Lb 20.5 kg
TM-90 16917 1 10 36 7/32”92 cm
25 19/32x25 19/32”65x65 cm
1/4-13/16”6-21 mm
2205 Lb 1000 kg • 40.8 Lb
18.5 kg54 Lb
24.5 kg
Ref. Accessories
18980 Maintenance kit
Highly reliable and durable.
13/16”21 mm
2205 Lb 1000 kg
18
Tile cutter with mobile breaking system ideal for cuts of 45º.
For intensive cutting of ceramic tiles, ideal for Wall and Floor tiles.
TR
• Mobile breaker for a better accuracy and cutting speed.
1.
• Double guide for better visibility of the scoring and cutting line.
2.
• Supplement base for a better stability of the tile and easy cut.
3.
• Adaptable scoring wheels to every material to maximize performance and cutting quality.
4.
• Chromed and rectified steel guides, with anti-corrosion treatment.• Lateral stop for straight and 45º repetitive cuts and square supplement.• Two-layer base with shock absortion effect.• Highly resistant aluminium base.• Interchangable scoring wheels from Ø1/4” (6mm) to 7/8” (22mm).• With Ø1/4” (6mm) and Ø13/32” (10mm) scoring wheels and transport case
included.
19
REF
TR-600 17926 2 24 23 5/8”60 cm
16 17/32x16 17/32”42x42 cm
1/4-19/32”6-15 mm
1323 Lb 600 kg
•22 Lb
10.0 kg28.7 Lb 13.0 kg
Ref. Accessories
18980 Maintenance kit
TR professional cutters
1
2
3
4
19/32”15 mm
1323 Lb 600 kg
20
Tile cutter with mobile breaking system ideal for cuts of 45º with swivel square and angular measurement system of high precision.
For intensive cutting of ceramic tiles, ideal for Wall and Floor tiles.
TR-S
• Multipoint breaker for a perfect “point to point” diagonal cut.
1.
• Central pivot swivel square for quick and accurate measurement of angular cuts.
2.
• Double guide for better visibility of the scoring and cutting line.
3.
• Adaptable scoring wheels to every material to maximize performance and cutting quality.
4.
• Chromed and rectified steel guides, with anti-corrosion treatment.• Lateral stop for repetitive cuts.• Base supplement for large formats.• Two-layer base with shock absortion effect.• Highly resistant aluminium base.• Interchangable scoring wheels from Ø1/4” (6mm) to 7/8” (22mm).• With Ø1/4” (6mm) and Ø13/32” (10mm) scoring wheels and transport case
included.
21
REF
TR-600-S 17936 2 24 23 5/8”60 cm
16 17/32x16 17/32”42x42 cm
1/4-19/32”6-15 mm
1323 Lb 600 kg
•22 Lb
10.0 kg28.7 Lb 13.0 kg
TR-700-S 17949 1 15 27 15/16”71 cm
19 11/16x19 11/16”50x50 cm
1/4-19/32”6-15 mm
1323 Lb 600 kg
•25.4 Lb 11.5 kg
32 Lb 14.5 kg
Ref. Accessories
18980 Maintenance kit
TR-S professional cutters
12
3
4
19/32”15 mm
1323 Lb 600 kg
22
Robust and accurate cutter, ideal for cutting diagonally.
For intensive cutting of ceramic tiles, ideal for Porcelain tiles and Extruded tiles.
TX
• 1.000Kg power breaker, for cutting hardest materials. 1.
• Doublesetofguidesforgreatervisibilityandflexionresistance.
2.
• Adaptable scoring wheels to every material to maximize performance and cutting quality.
3.
• Heavy duty case for easy transport. 4.
• Reinforced breaking feet.• For large ceramic formats.• Measuring system for performing angular cuts from 0 to 45°.• Lateral stop for repetitive straight and 45º cuts.• Double set of rectified steel guides, with anti-corrosion treatment.• Two-layer base with shock absorption effect.• Aluminum base of high strength.• Interchangeable scoring wheels Ø5/16” (8mm) to Ø7/8” (22mm).• With Ø13/32” (10mm) and Ø3/4” (18mm) scoring wheels and transport case
included.
23
REF
TX-700 17978 1 10 27 15/16”71 cm
19 11/16x19 11/16”50x50 cm
1/4-25/32”6-20 mm
2205 Lb 1.000 kg
•33.1 Lb 15.0 kg
45.2 Lb 20.5 kg
TX-900 17979 1 10 36 5/8”93 cm
25 19/32x25 19/32”65x65 cm
1/4-25/32”6-20 mm
2205 Lb 1.000 kg
•37.59 Lb 17.05 kg
50.7 Lb 23.0 kg
Ref. Accessories
18980 Maintenance kit
TX professional cutters
1
2
3
4
25/32”20 mm
2205 Lb 1000 kg
24
Robust and accurate cutter with a new angular measurement system, specially suitable for cutting materials of great hardness.
For intensive cutting of ceramic tiles, ideal for Porcelain tiles and Extruded tiles.
TX-N
• 1.000Kg power breaker, for cutting hardest materials. 1.
• Central pivot swivel square for quick and accurate measurement of angular cuts.
2.
• Doublesetofguidesforgreatervisibilityandflexionresistance.
3.
• Adaptable scoring wheels to every material to maximize performance and cutting quality.
4.
• Reinforced breaking feet.• For large ceramic formats.• Quick clamping system of the square.• Lateral stop for repetitive cuts.• Two-layer base with shock absorption effect.• Aluminum base of high strength.• Carrying case of greater resistance.• Includes set of wheels for better mobility (only TX-1200-N model).• Interchangeable scoring wheels Ø5/16” (8mm) to Ø7/8” (22mm).• With Ø13/32” (10mm) and Ø3/4” (18mm) scoring wheels and transport case
included.
25
REF
TX-700-N 17970 1 12 27 15/16”71 cm
19 11/16x19 11/16”50x50 cm
1/4-25/32”6-20 mm
2205 Lb 1000 kg
•34.2 Lb 15.5 kg
46.3 Lb 21.0 kg
TX-900-N 17971 1 10 36 5/8”93 cm
25 19/32x25 19/32”65x65 cm
1/4-25/32”6-20 mm
2205 Lb 1000 kg
•39.7 Lb 18.0 kg
52.9 Lb 24.0 kg
TX-1200-N 17974 1 10 49 7/32”125 cm
33 15/32x33 15/32”85x85 cm
1/4-25/32”6-20 mm
2205 Lb 1000 kg
•57.3 Lb 26.0 kg
73.9 Lb 33.5 kg
Ref. Accessories
18980 Maintenance kit
TX-N professional cutters
12
3
4
25/32”20 mm
2205 Lb 1000 kg
26
Single guide cutter with an angular measurement system and interchangeable scoring wheels.
For intensive cutting of ceramic tiles, ideal for Porcelain tiles.
TI-S
• Single guide system highly resistant to impacts. Longer life
1.
• Ergonomic handle with breaker built-in for speed and ease of use.
2.
• Central pivot swivel square for quick and accurate measurement of angular cuts.
3.
• Adaptable scoring wheels to every material to maximize performance and cutting quality.
4.
• Reinforced breaking feet.• Quick clamping system of the square.• Lateral stop for repetitive straight and 45º cuts.• Two-layer base with shock absorption effect.• Base supplement for large formats tiles.• Low maintenance internal mechanisms;do not require lubrication.• Scoring wheel replacement without tools needed.• Set designed to be used by pushing the handle.• Interchangeable scoring wheels Ø13/32” (10mm) to Ø7/8” (22mm).• Includes Ø13/32” (10mm) GOLD scoring wheel reinforced with Titanium.
27
REF
TI-66-S 12905 1 12 25 31/32”66 cm
18 1/8x18 1/8”46x46 cm
3/16-25/32”5-20 mm
2205 Lb 1.000 kg
23.15 Lb 10.50 kg
TI-75-S 12906 1 12 29 17/32”75 cm
20 7/8x20 7/8”53x53 cm
3/16-25/32”5-20 mm
2205 Lb 1.000 kg
24.25 Lb 11.00 kg
TI-93-S 12919 1 12 36 5/8”93 cm
25 19/32x25 19/32”65x65 cm
3/16-25/32”5-20 mm
2205 Lb 1.000 kg
30.86 Lb 14.00 kg
TI-S professional cutters
1
2
34
25/32”20 mm
2205 Lb 1000 kg
28
Single guide cutter with an angular measurement system and interchangeable scoring wheels.
For intensive cutting of ceramic tiles, ideal for Porcelain tiles.
TI-T
• Single guide system highly resistant to impacts. Longer life
1.
• Breaking system with height adjustment. Optimal separation for each thickness.
2.
• Central pivot swivel square for quick and accurate measurement of angular cuts.
3.
• Adaptable scoring wheels to every material to maximize performance and cutting quality.
4.
• Reinforced breaking feet.• Quick clamping system of the square.• Highly resistant ergonomic handle.• Lateral stop for repetitive straight and 45º cuts.• Includes Ø13/32” (10mm) GOLD scoring wheel reinforced with Titanium.• Two-layer base with shock absorption effect.• Base supplement for large formats tiles.• Low maintenance internal mechanisms;do not require lubrication.• Scoring wheel replacement without tools needed.• Interchangeable scoring wheels Ø13/32” (10mm) to Ø7/8” (22mm).• Set designed to be used by pulling the handle.• Height regulating system with three positions (1/4”-3/8” (6-9mm) 3/8”-1/2” (9-
12mm) 1/2”-13/16” (12-20mm), quick and accurate.
29
REF
TI-66-T 12907 1 12 25 31/32”66 cm
18 1/8x18 1/8”46x46 cm
3/16-25/32”5-20 mm
2205 Lb 1.000 kg
23.15 Lb 10.50 kg
TI-75-T 12908 1 12 29 17/32”75 cm
20 7/8x20 7/8”53x53 cm
3/16-25/32”5-20 mm
2205 Lb 1.000 kg
24.25 Lb 11.00 kg
TI-93-T 12920 1 12 36 5/8”93 cm
25 19/32x25 19/32”65x65 cm
3/16-25/32”5-20 mm
2205 Lb 1.000 kg
30.86 Lb 14.00 kg
TI-T professional cutters
1
2
34
25/32”20 mm
2205 Lb 1000 kg
30
With mobile breaker for diagonal cutting.
For cutting ceramic tiles.
SPEED PLUS
• Multipoint breaker for a perfect “point to point” diagonal cut.
1.
• Supplement base for a better stability of the tile and easy cut.
2.
• Aluminium structure for greater robustness, lightness and ease of transport.
3.
• Adaptable scoring wheels to every material to maximize performance and cutting quality.
4.
• Chromed steel guides, rectified and antirust treatment.• Millimetric lateral stop for repetitive cuts and square at 45.• Interchangeable scoring wheels from Ø1/4” (6mm) to 7/8” (22mm).• Ø5/16” (8mm) scoring wheel included.• Direct view of the scoring and cutting line.
• In models 72/92:• Base supplement made in aluminum and larger breaker.• Ø13/16” (20mm) solid-guide for greater torsion resistance.
31
REF
SPEED PLUS-62 13975 2 24 24 13/32”62 cm
17 5/16x17 5/16”44x44 cm
1/4-19/32”6-15 mm
1323 Lb 600 kg
- 17.15 Lb 7.78 kg
SPEED PLUS-72 13976 2 24 28 11/32”72 cm
20 3/32x20 3/32”51x51 cm
1/4-19/32”6-15 mm
1323 Lb 600 kg
- 21.1 Lb 9.57 kg
SPEED PLUS-92 13977 2 18 36 7/32”92 cm
25 19/32x25 19/32”65x65 cm
1/4-19/32”6-15 mm
1323 Lb 600 kg
- 26.94 Lb 12.22 kg
SPEED PLUS-62 13968 2 24 24 13/32”62 cm
17 5/16x17 5/16”44x44 cm
1/4-19/32”6-15 mm
1323 Lb 600 kg
•17.15 Lb 7.78 kg
21.08 Lb 9.56 kg
SPEED PLUS-72 13969 2 24 28 11/32”72 cm
20 3/32x20 3/32”51x51 cm
1/4-19/32”6-15 mm
1323 Lb 600 kg
•21.1 Lb 9.57 kg
25.02 Lb 11.35 kg
SPEED PLUS-92 13971 2 18 36 7/32”92 cm
25 19/32x25 19/32”65x65 cm
1/4-19/32”6-15 mm
1323 Lb 600 kg
•26.94 Lb 12.22 kg
30.86 Lb 14.00 kg
Ref. Accessories
18980 Maintenance kit
SPEED PLUS professional cutters
1
2 3
4
19/32”15 mm
1323 Lb 600 kg
32
The most versatile cutter in its class.
For cutting ceramic tiles.
SPEED
• Mobile breaker for a greater speed and accuracy of cut.
1.
• Double guide for better visibility during scoring. 2.
• Aluminium base for greater robustness, lightness and ease of transport.
3.
• Adaptable scoring wheels to every material to maximize performance and cutting quality.
4.
• Chromed steel guides, rectified and antirust treatment.• Millimetric lateral stop for repetitive cuts and square at 45.• Interchangeable scoring wheels from Ø1/4” (6mm) to 13/32” (10mm).• Ø5/16” (8mm) scoring wheel included.• Direct view of the scoring and cutting line.
• In models 72/92:• Base supplement made in aluminum.• Ø13/16” (20mm) solid-guide for greater torsion resistance and larger breaking
feet.
33
REF
SPEED-62 13963 2 24 24 13/32”62 cm
17 5/16x17 5/16”44x44 cm
3/16-19/32”5-15 mm
•15.45 Lb 7.01 kg
19.38 Lb 8.79 kg
SPEED-72 13973 1 18 28 11/32”72 cm
20 3/32x20 3/32”51x51 cm
3/16-19/32”5-15 mm
•20.68 Lb 9.38 kg
30.42 Lb 13.80 kg
SPEED-92 13993 1 18 36 7/32”92 cm
25 19/32x25 19/32”65x65 cm
3/16-19/32”5-15 mm
•26.9 Lb
12.20 kg37.48 Lb 17.00 kg
SPEED-62 13962 2 30 24 13/32”62 cm
17 5/16x17 5/16”44x44 cm
3/16-19/32”5-15 mm
15.45 Lb 7.01 kg
SPEED-72 13972 1 40 28 11/32”72 cm
20 3/32x20 3/32”51x51 cm
3/16-19/32”5-15 mm
20.68 Lb 9.38 kg
SPEED-92 13992 1 28 36 7/32”92 cm
25 19/32x25 19/32”65x65 cm
3/16-19/32”5-15 mm
26.9 Lb 12.20 kg
Ref. Accessories
18980 Maintenance kit
SPEED cutters
1
2
3
4
19/32”15 mm
34
1
23 4
STAR-N PLUS cutters
STAR-N PLUSFor cutting ceramic tiles
• Mobile breaker with closed sliders for greater bending resistance. 1.
• Aluminium support guides for added strength. 2.
• Practical lateral stop for easier and faster cuts. 3.
• Adaptable scoring wheels to every material to maximize performance and cutting quality. 4.
• Chromed steel guides with anti-corrosion treatment.• Millimetric lateral stop with 45° square.• Base supplement for a correct support of the tile.• Interchangeable scoring wheels from Ø1/4” (6mm) to 13/32” (10mm).• Ø1/4” (6mm) scoring wheel included.• Two-layer base with shock absorption effect.• Direct view of the scoring and cutting line.
REF
STAR-40-N PLUS 12996 4 48 16 17/32”42 cm
11 13/16x11 13/16”30x30 cm
15/32”12 mm • 7.7 Lb
3.5 kg10.54 Lb 4.78 kg
STAR-50-N PLUS 12998 4 48 20 3/32”51 cm
14 3/16x14 3/16”36x36 cm
15/32”12 mm • 8.8 Lb
4.0 kg11.6 Lb 5.26 kg
STAR-60-N PLUS 12979 4 48 24 1/32”61 cm
16 15/16x16 15/16”43x43 cm
15/32”12 mm • 10.6 Lb
4.8 kg13.67 Lb 6.20 kg
STAR-40-N PLUS 12995 6 72 / 108 16 17/32”42 cm
11 13/16x11 13/16”30x30 cm
15/32”12 mm
7.7 Lb 3.5 kg
STAR-50-N PLUS 12997 6 72 / 108 20 3/32”51 cm
14 3/16x14 3/16”36x36 cm
15/32”12 mm
8.8 Lb 4.0 kg
STAR-60-N PLUS 12978 6 54 24 1/32”61 cm
16 15/16x16 15/16”43x43 cm
15/32”12 mm
10.6 Lb 4.8 kg
Ref. Accessories
18980 Maintenance kit
Light and versatile cutter
15/32”12 mm
35
1
2
3
4
STAR-N cutters
STAR-NFor cutting ceramic tiles, ideal for Floor and Wall tiles.
• With mobile breaker, ideal for diagonal cuts. 1.
• Chromed steel guides with anti-corrosion treatment for a greater durability. 2.
• Supplementary base for a correct support of the piece. 3.
• Adaptable scoring wheels to every material to maximize performance and cutting quality. 4.
• Interchangeable scoring wheels from Ø1/4” (6mm) to 13/32” (10mm).• Ø1/4” (6mm) scoring wheel included.• Two-layer base with shock absorption effect.• Direct view of the scoring and cutting line.
REF
STAR-40-N 12991 4 48 16 17/32”42 cm
11 13/16x11 13/16”30x30 cm
15/32”12 mm • 7.89 Lb
3.58 kg10.65 Lb 4.83 kg
STAR-50-N 12993 4 48 20 3/32”51 cm
14 3/16x14 3/16”36x36 cm
15/32”12 mm • 8.97 Lb
4.07 kg11.73 Lb 5.32 kg
STAR-60-N 12969 4 48 24 1/32”61 cm
16 15/16x16 15/16”43x43 cm
15/32”12 mm • 11.46 Lb
5.20 kg14.55 Lb 6.60 kg
STAR-40-N 12990 6 72 / 108 16 17/32”42 cm
11 13/16x11 13/16”30x30 cm
15/32”12 mm
7.89 Lb 3.58 kg
STAR-50-N 12992 6 72 / 108 20 3/32”51 cm
14 3/16x14 3/16”36x36 cm
15/32”12 mm
8.97 Lb 4.07 kg
STAR-60-N 12968 6 54 24 1/32”61 cm
16 15/16x16 15/16”43x43 cm
15/32”12 mm
11.46 Lb 5.20 kg
Ref. Accessories
18980 Maintenance kit
Light and functional cutter.
15/32”12 mm
36
1
2
34
POCKET cutters
POCKETFor cutting ceramic tiles, ideal for Floor and Wall tiles.
• With mobile breaker, ideal for diagonal cuts. 1.
• Folding base to optimize space and improve transportation. 2.
• Aluminium structure compact and lightweight. 3.
• Adaptable scoring wheels to every material to maximize performance and cutting quality. 4.
• Chromed steel guides with anti-corrosion treatment.• Interchangeable scoring wheels from Ø1/4” (6mm) to 13/32” (10mm).• Ø1/4” (6mm) scoring wheel included.• Two-layer base with shock absorption effect.• Direct view of the scoring and cutting line.
REF
POCKET-40 12981 4 128 16 17/32”42 cm
11 13/16x11 13/16”30x30 cm
15/32”12 mm • 6.4 Lb
2.9 kg7.54 Lb 3.42 kg
POCKET-50 12986 4 96 20 3/32”51 cm
14 3/16x14 3/16”36x36 cm
15/32”12 mm • 7.34 Lb
3.33 kg8.64 Lb 3.92 kg
POCKET-40 12980 6 120 16 17/32”42 cm
11 13/16x11 13/16”30x30 cm
15/32”12 mm
6.4 Lb 2.9 kg
POCKET-50 12985 6 120 20 3/32”51 cm
14 3/16x14 3/16”36x36 cm
15/32”12 mm
7.34 Lb 3.33 kg
Ref. Accessories
12924 POCKET lateral stop
18980 Maintenance kit
Lightness and functionality in less space.
19/32”15 mm
37
1
23
4
RAPID cutters
RAPIDFor cutting ceramic tiles, ideal for Floor and Wall tiles.
• Light steel structure. Easy transport. 1.
• Chromed steel guides with anti-corrosion treatment for durability. 2.
• Direct vision of the scoring and cutting line. 3.
• Adaptable scoring wheels to every material to maximize performance and cutting quality. 4.
• Single point breaker.• Ø1/4” (6mm) scoring wheel included• Interchangeable scoring wheels from Ø1/4” (6mm) to Ø13/32”(10mm).
REF
RAPID-42 13925 4 84 17 5/16”44 cm
12 19/32x12 19/32”32x32 cm
19/32”15 mm
9.24 Lb 4.19 kg
RAPID-62 13930 4 60 24 13/32”62 cm
17 5/16x17 5/16”44x44 cm
19/32”15 mm
11.6 Lb 5.26 kg
Ref. Accessories
18980 Maintenance kit
Single point cutter ideal for straight cuts.
19/32”15 mm
38
For cutting Floor and Wall tiles.
• Chromed and rectified steel guides and aluminium guides support.• With a mobile breaker and Ø1/4” (6mm) scoring wheel included• Interchangeable scoring wheels Ø1/4” (6mm) to 13/32 (10mm) for each material adaptation.
REF
PRACTIC 40 25957 6 108 16 17/32”42 cm
11 13/16x11 13/16”30x30 cm
13/32”10 mm
4.63 Lb 2.10 kg
PRACTIC 50 25958 6 78 20 3/32”51 cm
14 3/16x14 3/16”36x36 cm
13/32”10 mm
5.18 Lb 2.35 kg
PRACTIC 60 25959 6 72 24 1/32”61 cm
16 15/16x16 15/16”43x43 cm
13/32”10 mm
6.94 Lb 3.15 kg
PRACTIC
13/32”10 mm
For cutting Floor and Wall tiles.
• Base, guide and supports in steel and aluminium.• With mobile breaker and Ø9/16” (14mm) Tungsten Carbide scoring wheel included.• Lateral stop and 45º square included.
REF
BASIC 40 25954 6 108 16 17/32”42 cm
11 13/16x11 13/16”30x30 cm
13/32”10 mm
4.08 Lb 1.85 kg
BASIC 50 25955 6 78 20 3/32”51 cm
14 3/16x14 3/16”36x36 cm
13/32”10 mm
4.63 Lb 2.10 kg
BASIC 60 25956 6 72 24 1/32”61 cm
16 15/16”43.43 cm
13/32”10 mm
6.39 Lb 2.90 kg
BASIC
13/32”10 mm
39
KIT• Supplied assembled.• With mobile breaking system.• Includes Ø9/16” (14mm) scoring wheel.
REF
Kit 30 12916 20 240 12 19/32”32 cm
8 21/32x8 21/32”22x22 cm
13/32”10 mm
2.2 Lb 1.00 kg
13/32”10 mm
TEN BRIC• Nipper with scoring wheel and breaker.• Includes Ø9/16” (14mm) scoring wheel.
REF
TEN-BRIC 05975 5 680 13/32”10 mm
0.51 Lb 0.23 kg
MAINTENANCE FOR CUTTERS• Cleaning and lubricating oil suitable for perfect maintenance of machines that are assigned for construction, guidance sliding system,
tilted axes, spiral, metallic surface.
REF
Maintenance kit 18980 8
40
SCORING WHEELS AND PUNCHES FOR MANUAL CUTTERS•ForrangesTS,TR,TF,SPEEDSTAR,POCKET,RAPIDandPRACTICcutters.
• For Wall tiles.• Tungsten Carbide scoring wheel of high resistance and duration. • Patented model with new high technology RUBI® alloy; maximum precision and
resistant to wear.
REF
Scoring wheel Ø1/4” (6mm) 01945 10
Scoring wheel Ø1/4” (6mm)
• For Wall tiles, Floor tiles and Porcelain tiles.• Tungsten Carbide scoring wheel of high resistance and duration. • Patented model with new high technology RUBI® maximum precision and
resistant to wear.
REF
Scoring wheel Ø3/8” (8mm) 01958 10
Scoring wheel Ø3/8” (8mm)
• For Floor tiles.• Tungsten Carbide scoring wheel of high resistance and duration.• Handle made with a patented geometry for a maximum precision and minimum
vibration
REF
Scoring wheel Ø13/32” (10mm) 01946 10
Scoring wheel Ø13/32” (10mm)
• For Floor tiles.• Tungsten carbide scoring wheel with a superficial Titanium treatment.• Handle made with a patented geometry for a maximum precision and minimum
vibration. Long-lasting.
REF
Scoring wheel Ø13/32” (10mm) GOLD 01949 10
Scoring wheel Ø13/32” (10mm) GOLD
• For rough and difficult to cut ceramic tiles.• Tungsten Carbide scoring wheel of high resistance and duration.• Patented handle geometry; maximum precision and minimum vibration.
REF
Scoring wheel Ø3/4” (18mm) 01950 10
Scoring wheel Ø3/4” (18mm)
• For rough and difficult to cut ceramic tiles.• Tungsten Carbide scoring wheel with a superficial Titanium treatment. • Handle made with a patented geometry for a maximum precision and minimum
vibration. Long-lasting.
REF
Scoring wheel Ø3/4” (18mm) GOLD 01952 10
Scoring wheel Ø3/4” (18mm) GOLD
41
SCORING WHEELS AND PUNCHES FOR MANUAL CUTTERS•ForrangesTS,TR,TF,SPEEDSTAR,POCKET,RAPIDandPRACTICcutters.
• For sharp cuttings in hard ceramics.• Tungsten Carbide scoring wheel of high resistance and duration.• Handle made with a patented geometry for a maximum precision and minimum
vibration
REF
Scoring wheel Ø7/8” (22mm) 01961 10
Scoring wheel Ø7/8” (22mm)
• For sharp cuttings in hard ceramics.• Tungsten Carbide scoring wheel with a superficial Titanium treatment. • Handle made with a patented geometry for a maximum precision and minimum
vibration. Long-lasting.
REF
Scoring wheel Ø7/8” (22mm) GOLD 01964 10
Scoring wheel Ø7/8” (22mm) GOLD
• Tungsten Carbide scoring wheel of high resistance and duration.• Handle made with a patented geometry for a maximum precision and minimum
vibration. • Patented model with new high technology RUBI®; maximum resistant to wear.
REF
2 scoring wheel Ø1/4” (6mm) set 01947 10
2 scoring wheel Ø 1/4” (6mm) set
• Tungsten Carbide scoring wheel of high resistance and duration.• Handle made with a patented geometry for a maximum precision and minimum
vibration.
REF
Ø1/4” (6mm) & Ø13/32” (10mm) scoring wheels set 01948 10
Ø1/4” (6mm) & Ø13/32” (10mm) scoring wheels set
• Allows the cut of squares in Wall tiles.• Handle made with a patented geometry for a maximum precision and minimum
vibration.• Tip made with a long-life material resistant to abrasion.
REF
Punch 01970 10
Punch
• To 45º miters on Wall tiles.• Handle made with a patented geometry for a maximum precision and minimum
vibration. • Tip made with a long-life material resistant to abrasion.
REF
Mitering punch 01971 10
Mitering punch
42
SCORING WHEELS SETS•Setsofscoringwheelsofdifferentdiameterswithbox.
• For TS, TR, TF, SPEED & STAR ranges, includes 1 Ø1/4” (6mm) scoring wheels and 1 Ø13/32” (10mm) scoring wheel.
• In plastic box with transparent cover.• Supplied in blister
REF
Scoring wheel set 1 01995 5
Scoring wheel set 1
• For TS, TS-PLUS, TR, TF & SPEED PLUS models, includes 1 scoring wheel of Ø1/4” (6mm),
• Ø5/16” (8mm), Ø13/32” (10mm), Ø3/4” (18mm), Ø7/8” (22mm)• In plastic box with transparent cover.• Supplied in blister.
REF
Scoring wheel set 2 01996 5
Scoring wheel set 2
TX & TM SCORING WHEELS•PLUSscoringwheelsforTX&TMprofessionalcutters.
• For Wall tiles, Floor tiles and Porcelain tiles.• Tungsten Carbide scoring wheel of high resistance and duration.• Handle made with a patented geometry for a maximum precision and minimum
vibration.
REF
Scoring wheel Ø5/16” (8mm) PLUS 01959 10
Scoring wheel Ø5/16” (8mm) PLUS
• For Floor tiles.• Tungsten Carbide scoring wheel of high resistance and duration.• Handle made with a patented geometry for a maximum precision and minimum
vibration.
REF
Scoring wheel Ø13/32” (10mm) PLUS 01991 10
Scoring wheel Ø13/32” (10mm) PLUS
• For Floor tiles.• Tungsten carbide scoring wheel with a superficial Titanium treatment.• Handle made with a patented geometry for a maximum precision and minimum
vibration.• Long-lasting.
REF
Scoring wheel Ø13/32” (10mm) PLUS GOLD 01993 10
Scoring wheel Ø13/32” (10mm) PLUS GOLD
43
TX & TM SCORING WHEELS•PLUSscoringwheelsforTX&TMprofessionalcutters.
• For rough and difficult to cut tiles.• Tungsten Carbide scoring wheel of high resistance and duration.• Handle made with a patented geometry for a maximum precision and minimum
vibration.
REF
Scoring wheel Ø3/4” (18mm) PLUS 01992 10
Scoring wheel Ø3/4” (18mm) PLUS
• For rough and difficult to cut ceramic tiles.• Tungsten Carbide scoring wheel with a superficial Titanium treatment. • Handle made with a patented geometry for a maximum precision and minimum
vibration.• Long-lasting.
REF
Scoring wheel Ø3/4” (18mm) PLUS GOLD 01994 10
Scoring wheel Ø3/4” (18mm) PLUS GOLD
• For sharp cuttings in hard ceramics.• Tungsten Carbide scoring wheel of high resistance and duration.• Handle made with a patented geometry for a maximum precision and minimum
vibration.
REF
Scoring wheel Ø7/8” (22mm) PLUS 01962 10
Scoring wheel Ø7/8” (22mm) PLUS
• For sharp cuttings in hard ceramics.• Tungsten Carbide scoring wheel with a superficial Titanium treatment. • Handle made with a patented geometry for a maximum precision and minimum
vibration.• Long-lasting.
REF
Scoring wheel Ø7/8” (22mm) PLUS GOLD 01965 10
Scoring wheel Ø7/8” (22mm) PLUS GOLD
44
TI SCORING WHEELS•ScoringwheelsforTI-T/TI-Scutters.
• For Floor tiles.• Tungsten Carbide scoring wheel of high resistance and duration.• Handle made with a patented geometry for a maximum precision and minimum
vibration.
REF
TI Scoring wheel Ø13/32” (10mm) 01975 10
TI Scoring wheel Ø13/32” (10mm)
• For Floor tiles.• Tungsten Carbide scoring wheel with a superficial Titanium treatment. • Handle made with a patented geometry for a maximum precision and minimum
vibration. Long-lasting.
REF
TI Scoring wheel Ø13/32” (10mm) GOLD 01978 10
TI Scoring wheel Ø13/32” (10mm) GOLD
• Special for rough or difficult to cut ceramic tiles.• Tungsten Carbide scoring wheel of high resistance and duration.• Handle made with a patented geometry for a maximum precision and minimum
vibration.
REF
TI scoring wheel Ø3/4” (18mm) 01976 10
TI scoring wheel Ø3/4” (18mm)
• Special for rough and difficult to cut ceramic tiles.• Tungsten Carbide scoring wheel with a superficial Titanium treatment.• Handle made with a patented geometry for a maximum precision and minimum
vibration. Long-lasting.
REF
TI scoring wheel Ø3/4” (18mm) GOLD 01974 10
TI scoring wheel Ø3/4” (18mm) GOLD
• Special for sharp cuttings in hard ceramics.• Tungsten Carbide scoring wheel of high resistance and duration. Handle made
with a patented geometry for a maximum precision and minimum vibration.
REF
TI scoring wheel Ø7/8” (22mm) 01977 10
TI scoring wheel Ø7/8” (22mm)
• Special for sharp cuttings in hard ceramics.• Tungsten Carbide scoring wheel with a superficial Titanium treatment. • Handle made with a patented geometry for a maximum precision and minimum
vibration. Long-lasting.
REF
TI scoring wheel Ø7/8” (22mm) GOLD 01979 10
TI scoring wheel Ø7/8” (22mm) GOLD
45
SCORING WHEELS FOR MANUAL CUTTERS•Selectionofscoringwheelsformanualcutters.
• For Wall tiles.• Tungsten Carbide scoring wheel of high resistance and duration. • Patented model with new high technology RUBI® alloy; maximum precision and
resistant to wear.
REF
Scoring wheel Ø1/4” (6mm) 01945 10
Scoring wheel Ø1/4” (6mm)
• For Wall tiles, Floor tiles and Porcelain tiles.• Tungsten Carbide scoring wheel of high resistance and duration. • Patented model with new high technology RUBI® maximum precision and
resistant to wear.
REF
Scoring wheel Ø5/16” (8mm) 01958 10
Scoring wheel Ø5/16” (8mm)
• For Floor tiles.• Tungsten Carbide scoring wheel of high resistance and duration.• Handle made with a patented geometry for a maximum precision and minimum
vibration.
REF
Scoring wheel Ø13/32” (10mm) 01946 10
Scoring wheel Ø13/32” (10mm)
• Tungsten Carbide scoring wheel of high resistance and duration.• Handle made with a patented geometry for a maximum precision and minimum
vibration. • Patented model with new high technology RUBI®; maximum resistant to wear.
REF
2 scoring wheel Ø 1/4” (6mm) set 01947 10
2 scoring wheel Ø 1/4” (6mm) set
• Tungsten Carbide scoring wheel of high resistance and duration.• Handle made with a patented geometry for a maximum precision and minimum
vibration.
REF
Ø1/4” (6mm) & Ø13/32” (10mm) scoring wheels set 01948 10
Ø1/4” (6mm) & Ø13/32” (10mm) scoring wheels set
• For BASIC, KIT and TEN-BRIC tile cutters.• Wheel made of Tungsten Carbide.
REF
Scoring wheel Ø9/16” (14mm) 01960 10
Scoring wheel Ø9/16” (14mm)
SCORING WHEEL CHARACTERISTICS
Al Alla AllbAlll
Bla
BllbBlla
Blll
TSTFTRSPEEDPlus
GOLD
WIDIA
GOLD
SPEEDSTARPOCKETRAPIDPRACTIC
BASICKITTEN-BRIC
GOLD
TMTX
GOLDTI
RECOMMENDATIONS FOR AN OPTIMUM CUT QUALITY AND DURABILITY OF THE SCORING WHEEL
The RUBI® scoring wheels are manufactured in highly resistant, durable Tungsten Carbide. GOLD: Scoring wheel in Tungsten Carbide with Titanium surface treatment, long-lasting.
01960
Optimal use
Second best use
Optional Use
RUSTIC TILES
PORCELAIN
FLOOR TILES
WALL TILE
6 mm1/4 inch 5/16 inch 13/32 inch 3/4 inch 7/8 inch
8 mm 10 mm 18 mm 22 mm
01945
01945
01958
01959
01958
01946
01991
01993
01975
01978
01960
01946
01949
01949
01970/1971
01950
01992
01994
01976
01974
01952
01961
01962
01965
01977
01979
01964
(Blll)
Ø 9/16 inchØ 14 mm
The norm UNE-EN 14411 applies to ceramic & tile classification and it is of international application. It is indicated on all tile boxes.
UNE
1441
1
4646
47
• Direct measure up to 10” (25cm).• Regulation 0º to 45º• Compatible with POCKET manual cutters
REF
POCKET lateral stop 12924 1
POCKET LATERAL STOP
• Millimetric lateral stop for repetitive cuts with 45° square
REF
STAR-N PLUS & STAR-N lateral stop 12923 1
STAR-N PLUS & STAR-N LATERAL STOP
• For repetitive cuts.• With 45º square.
REF
BASIC/PRACTIC lateral stop 25238 1
BASIC/PRACTIC LATERAL STOP
• For very hard and thick materials, specially gres.• Maximum breaking thickness: 1 3/8” (32 mm.).• Without breaking length limit.• Breaking power: 2,204.6Lb (1.000kg).
REF
MAXI breaker 07935 5
MAXI BREAKER
48
• Saw with 29 Tungsten Carbide teeth. • Length: 29” (75cm).
REF
Cellular concrete saw 70930 2
CELLULAR CONCRETE SAW
• Saw with 29 Tungsten Carbide teeth.• Length: 17” (45cm).
REF
Gypsum & plaster plates saw 70931 2
GYPSUM & PLASTER PLATES SAW
• Maximum cutting length: 16” (41cm).• Strength: 2,204.6Lb (1.000kg).
REF
Terrazzo cutter T-41 05900 1 10 16 5/32”41 cm
5/32”4.2 mm
2205 Lb 1.000 kg
66 Lb 30 kg
TERRAZZO CUTTER T-41
• Maximum cutting length: 20” (51cm).• Strength: 2,204.6Lb (1.000kg).
REF
Terrazzo cutter T-51 05910 1 10 20 3/32”51 cm
3/16”5.5 mm
2205 Lb 1.000 kg
97.7 Lb 44.3 kg
TERRAZZO CUTTER T-51
49
• For cutting concrete blocks. Strength: 9,038.9Lb (4.100kg).• Maximum cutting length: 12” (31cm). Width: 4” (10,5cm).
REF
Block cutter B-13 05925 1 16 12 7/32”31 cm
13/32”10.5 mm
9039 Lb 4.100 kg
62.4 Lb 28.3 kg
BLOCK CUTTER B-13
• For cutting concrete blocks. Strength: 9,038.9Lb (4.100kg).• Maximum cutting length: 16” (41cm). Width: 1”-6 1/8” (2,5-15,5cm)
REFBlock cutter B-14-S 05931 1 8 16 5/32”
41 cm3/32-19/32”
2.5-15.5 mm9039 Lb 4.100 kg
126 Lb 57 kg
BLOCK CUTTER B-14-S
• For clay and concrete roofing tiles, can cut in all directions.• Weight: 15Lb (6,8kg).
REF
Roof tile cutter with base 65922 1 16
ROOF TILE CUTTER
• Special shear for slates and fiber-cement.• Supplied in blister
REF
Slate shear 65924 1
SLATE SHEAR
ELECTRIC CUTTING AND
MECHANIZATION OF CERAMIC TILES
ELECTRIC CUTTING AND MITERING SAWS
CIRCULAR SAW, GRINDER AND WALL CHASER
DIAMOND AND ABRASIVE BLADES
52
Diamant ND-180
ND-180For cutting ceramic tiles, ideal for Floor and Wall tiles.
• Single-phase motor.• For Wall tiles, Floor tiles and other materials.• Diamond blade Ø7” (180mm) included.• With thermic security switch.• Water refrigeration of the blade.• Electric cable: 4.9ft (1,5m).• With foldable table for miter cutting up to 7 7/8” (20cm).• With lateral stop for repetitive cuts.• Guide for 45º cuts.
ND-180 1 16 2800 7 7/8”20 cm
7/8”22 mm
1 3/8”35 mm • 7 “
180 mm15 11/32x14 31/32x9 7/16”39.5x38.5x24.5 cm
26 Lb 11.8 kg
ND-180Ref. 24956 25925 25926 25945 25963 25964
Voltage 230V-50 Hz. 230V-50 Hz. 120V-60 Hz. 230V - 50 Hz. 120V-60Hz. 120V-60Hz.
Ref. Accessories
45305 ND-180 Water tray
Portable cutter, ideal for finishings and renovations.
0,7 cv/hp 1 3/8”35 mm
53
Diamant DU-200-L
DU-200-LFor cutting ceramic tiles, ideal for Floor and Wall tiles.
• For Wall and Floor tiles and other materials• Diamond blade Ø8” (200mm) included.• Motor assembly mounted on sliding bearings and foldable for miter cuts.• Electric cable: 4.9ft (1,5m).• With lateral stop for repetitive cuts and adjustable square from 0 to 45º.• Direct drive.
DU-200-L 2750 23 5/8”60 cm
16 17/32”42X42 cm
23/32”18 mm
1 1/4”32 mm • 8 “
200 mm38 31/32”
99X39X31 cm45.2 Lb 20.5 kg
DU-200-LRef. 25972 25993 25989 25973 25990 25982 25984
Voltage 230V-50 Hz. 230V-50 Hz. 230V-50 Hz.UK. 230V-50 Hz.UK. 230V-50 Hz. 230V-50 Hz. 230V-50 Hz.DK.
Ref. Accessories
25966 DU-200-L Support table
Mobile head cutter for renovations and light work.
1 cv/hp 1 1/4”32 mm
23 5/8”60 cm
54
Portable cutter, ideal forfinishingsandrenovations.
For cutting ceramic tiles and other materials.
ND-200
• Lightweight and compact, ideal for working in small spaces.
1.
• Stainless steel folding table. More durability. 2.
• Fast positioning system at 45º. Easy to use. 3.
• Removablediskprotectorforverticalcuts.Simplifiescreation of light boxes, frames, etc...
4.
• CEV-PRO Ø8” (200mm) diamond blade included.• Water refrigeration of the blade.• Lateral stop to allow repetitive cuts.• Electric cable: 4.9ft (1,5m).• Direct drive with thermal protector.
55
ND-200 1 8 2770 9 7/16”
24 cm1 9/16”
40 mm•
8 “200 mm
20 3/32x20 15/32x9 7/16”51x52.5x24 cm
37.9 Lb 17.2 kg
ND-200Ref. 45910 45915 45911 45916 45918
Voltage 230V-50 Hz. 230V-50 Hz.UK 220V-60 Hz. 120V-50 Hz.UK 120V-60 Hz.USA
Ref. Accessories
45434 ND-200 Water tray
Diamant ND-200
1
2
3
4
1,2 cv/hp 1 9/16”40 mm
56
Mobile head cutter of maximum functionality.
For Wall tiles, Floor tiles, Porcelain and other materials.
DW-250-N
• Motor assembly mounted on sliding bearings for maximum quality of cut.
1.
• Practical plunge effect for easy adjustment of cutting thickness. Adaptable to each material.
2.
• Stainless steel tables, removable for easy cleaning of the machine.
3.
• Folding legs with built-in wheels for easy carrying. 4.
• CEV-PRO Ø10” (250mm) diamond blade included. • Direct drive, single phase 1.1kW (1.5CV) motor with thermal protector.• Water pump refrigeration of blade with flow control valve.• Chassis, reinforced structural rigidity.• Foldable head at 45º for mitering cuts, plunge effect and height adjustment
enables cuts up to 32 11/16” (83cm) in length.• New measuring square, easy adjustment.• Lateral stop for repetitive cuts and angles (0° and 45°).• Machine supplied without cable.
57
DW-250-N 1 4 2875 32 11/16”83 cm
22 27/32x22 27/32”58.5x58.5 cm
2 9/16 / 3 5/32”65 / 80 mm
•10 “
250 mm53 5/32x20 7/8x49 19/32”
135x53.5x126 cm104 Lb 47 kg
•
DW-250-NRef. 54940 54941 54948 54949 54943
Voltage 230Vx50 Hz. 220V-60 Hz. 120V-60Hz.USA 120V-60 Hz. 110V-50 Hz.
Ref. Accessories
57991 Set of flanges DW-N/NL
Cables with plug
Diamant DW-250-N
1
2
3
4
1,5 cv/hp 3 5/32”80 mm
32 11/16”83 cm
58
Mobile head cutter of maximum functionality.
For Wall tiles, Floor tiles, Porcelain and other materials.
DW-250-NL
• Practical plunge effect for easy adjustment of cutting thickness.
1.
• New aluminum square, easily adjustable. High precision cutting in large formats.
2.
• Stainless steel tables, removable for easy cleaning of the machine.
3.
• Folding legs with built-in wheels for easy carrying. 4.
• CEV-PRO Ø10” (250mm) diamond blade included.• Direct drive, single phase 1.1kW (1.5CV) motor with thermal protector.• Water pump refrigeration of blade with flow control valve.• Chassis, reinforced structural rigidity.• Foldable head at 45º for mitering cuts, plunge effect and height adjustment
enables cuts up to 46 1/16” (117cm) in length.• Adjustable square from 0 to 60º.• Easy and fast adjustmen lateral stop for repetitive cuts and angles (0° and 45°).• Machine supplied without cable.
59
DW-250-NL **1 2875 46 1/16”
117 cm32 9/32x32 9/32”82.5x82.5 cm
1 31/32 / 3 5/32”50 / 80 mm
•10 “
250 mm66 15/16x20 7/8x49 19/32”
170x53.5x126 cm123 Lb 56 kg
•
DW-250-NLRef. 55931 55932 55933 55934 55937
Voltage 230V-50 Hz. 220V-60 Hz. 110V-50 Hz. 120V-60 Hz. 120V-60 Hz.
Ref. Accessories
54822 Lateral stop 50 cm. DW-NL
57991 Set of flanges DW-N/NL
Cables with plug
Diamant DW-250-NL
1
23
4
1,5 cv/hp 3 5/32”80 mm
46 1/16”117 cm
60
Mobile head machine of high accuracy, ideal for miter cutting.
For Wall tiles, Floor tiles, Porcelain tiles, Marble, Granite and other materials.
DS-250
• Motor assembly mounted on sliding bearings for maximumprecisionandreliability.Perfectfinishes.
1.
• Aluminum structure. Lighter, and maximum resistance to working conditions.
2.
• Robust aluminum guide, folding at 45º, perfect miter. 3.
• Removable aluminum tables for easy cleaning of the machine.
4.
• With thermic and overload security switches.• Water pump refrigeration of blade with flow control valve.• Diamond blade Ø10” (250mm) not included.• With a double set of flanges, one specially designed for miter cuts.• Motor assembly mounted on sliding bearings and foldable for maximum accuracy
miter cuts.• Safety protector for segmented blades.• With lateral stop for repetitive cuts.• Retractile legs with “shield” function and wheels for transportation.• Removable water tank system.• Machine supplied without the cable.
61
DS-250 1000 1 **1 2800 40 15/16”
104.5 cm29 17/32x29 17/32”75.2x75.2 cm
1 31/32”50 mm
1 “25.4 mm
10 “250 mm
66 15/16x28 3/4x27 9/16”170x73x70 cm
236 Lb 107 kg
282 Lb 128 kg
DS-250 1300 1 **1 2800 52 3/4”
134.5 cm37 25/32x37 25/32”96.4x96.4 cm
1 31/32”50 mm
1 “25.4 mm
10 “250 mm
78 3/4x28 3/4x27 9/16”200x73x70 cm
240 Lb 109 kg
289 Lb 131 kg
DS-250 1500 1 **1 2800 60 5/8”
154.5 cm43 5/16x43 5/16”
110.5x110.5 cm1 31/32”
50 mm1 “
25.4 mm10 “
250 mm86 5/8x27 9/16”
220.73x70 cm245 Lb 111 kg
298 Lb 135 kg
DS-250 1000Ref. 51970 51972 51974 51975
Voltage 230V-50 Hz. 220V-60 Hz. 120V-50 Hz. 120V-60 Hz.inch.
DS-250 1300Ref. 51980 51982 51984 51985
Voltage 230V-50 Hz. 220Vx60 Hz. 120V-50 Hz. 120V-60 Hz.inch.
DS-250 1500Ref. 51990 51992 51994 51995
Voltage 230V-50 Hz. 220V-60 Hz. 120V-50 Hz. 120V-60 Hz.Inch.
Ref. Accessories
51911 Tile fixing set DS-250 1000/DX-350 1000
51916 Tile fixer
56137 Miter accessory DS/DX
57949 Roller table extension DS/DX
Diamant DS-250
1
2
3
4
3 cv/hp 1 31/32”50 mm
62
Mobile head machine with plunge effect for total versatility.
For all types of ceramic tiles and building materials like;Marble, Granite, Facade bricks, Fireproof bricks, etc...
DX-350
• Motor assembly mounted on sliding bearings for maximumprecisionandreliability.Perfectfinishes.
1.
• Aluminum structure. Lighter, and maximum resistance to working conditions.
2.
• High performance plunge effect. Maximum cutting height.
3.
• Equipped with protective safety system for segmented blades.
4.
• With thermal and overload security switches.• Water pump refrigeration of blade with flow control valve.• Diamond blade Ø 14” (350 mm.) not included.• Allows the use of a Ø 12” (300 mm.) blade.• Adjustable mobile head with plunge cut capability.• Retractile legs with “shield” function and wheels for transportation.• Motor on top and belt transmision.• With lateral stop for repetitive cuts.• Aluminium working surface removable for easy cleaning.• Removable water tank system.• Machine supplied without the cable.
63
DX-350 1000 2800 39 3/8”
100 cm28 11/32x28 11/32”
72x72 cm4 23/32 / 9 1/16”
120 / 230 mm1 “
25.4 mm12 -14 “
300-350 mm66 15/16x28 3/4x33 27/32”
170x73x86 cm221.6 Lb 100.5 kg
DX-350 1300 2800 51 3/16”
130 cm36 5/8x36 5/8”
93.2x93.2 cm4 23/32 / 9 1/16”
120 / 230 mm1 “
25.4 mm12 -14 “
300-350 mm78 3/4x28 3/4x33 27/32”
200x73x86 cm236 Lb 107 kg
DX-350 1000Ref. 51920 51922 51924 51925
Voltage 230V-50 Hz. 220V-60 Hz. 120V-50 Hz. 120V-60 Hz.Inch.
DX-350 1300Ref. 51930 51932 51934 51935
Voltage 230V-50 Hz. 230V-60 Hz. 120V-50 Hz. 120V-60 Hz.Inch.
Ref. Accessories
51911 Tile fixing set DS-250 1000/DX-350 1000
51916 Tile fixer
54939 Set of flanges DX-350
51915 Set of flanges DS-300 and DX-350
Diamant DX-350
1
2
3
4
3 cv/hp 9 1/16”230 mm
64
Electric saw with plunge effect capability for cutting all kinds of material.
For all types of building materials like: Masonry bricks, Facade bricks, Fireproof bricks, Marble, Granite and ceramic tiles.
DR-350
• Head with high performance plunge effect. Large cutting capacity.
1.
• Large table for a larger work surface and comfort. 2.
• Steel structure robustness. Increased resistance to the demands of intensive work.
3.
• Equipped with protective safety system for segmented blades.
4.
• With thermal protector.• Adjustable head to 45º.• Large table 23 1/16”x19 1/2” (58.5x49.5cm).• Blade refrigeration by water pump with integrated regulation valve.• Diamond blade Ø12-14” (300-350mm) not included.• Machine supplied without cable.• Direct drive.
65
DR-350 1 **1 2800 27 15/16”71.5 cm
19 11/16x19 11/16”50x50 cm
3 3/4 / 5 29/32”95 / 150 mm
12 -14 “300-350 mm
45 9/32x27 5/32x51 31/32”115x69x132.5 cm
140 Lb 63.5 kg
•
DR-350Ref. 56940 56942 56944 56945 56948
Voltage 230V-50 Hz. 220V-60 Hz. 120V-50 Hz.UK 120V-60 Hz.USA 380V-50 Hz.
Ref. Accessories
Cables with plug
Diamant DR-350
1
2
3
4
3-4 cv/hp 5 29/32”150 mm
27 15/16”71.5 cm
∞ ∞ -20cm
77/8”
22mm
7/8”
35cm
71/32”
180mm
7”
11,8Kg.
26Lb.
∞ ∞ -20cm
77/8”
22mm
7/8”
35cm
71/32”
180 mm
7”
13,6 Kg.
29Lb.
∞ ∞ -(*1)23cm
91/16”
24mm
31/32”
40mm
15/8”
200mm
8”
17,2Kg.
37,9Lb.ND-200
DU-200-L60cm 42x42cm -18mm
23/32”16x16“23”
32mm
155/8”
200mm
8”
20,5Kg.
45,2Lb.∞
(*2) 83cm(*2)58,5x58,5cm •
3211/16” 231/16”x231/16”
35mm
113/32”
50/80mm
132/32”/35/32”
250mm
10”
47Kg.
103,6Lb.∞DW-250-N
(*1) With lateral stop.(*2) 13/32” (10mm) thick material and plunge effect.
ELECTRIC CUTTING AND MITERING SAWS
ND-180
ND-180 +
104,5 cm 75,2x75,2 cm •42” 295/8”x295/8”
(*3) 23 mm
29/32”
50 mm
2”
250 mm
10”
91,5 Kg.
201,7 Lb.∞
134,5 cm 96,4x96,4 cm •53” 38”x38”
(*3) 23 mm
29/32”
50 mm
2”
250 mm
10”
102,8 Kg.
226,6 Lb.∞
154,5 cm 110,5x110,5 cm •61” 44”x44”
(*3) 23 mm
29/32”
50 mm
2”
250 mm
10”
106 Kg.
233,7 Lb.∞
(*4)122cm (*4)86x86cm •481/16” 337/8”x337/8”
(*5)65mm
29/16”
120/230mm
43/4”/91/16”
300-350mm
12-14”
100,5Kg.
221,6Lb.∞
(*2)117cm(*2)82,5x82,5cm •
463/32” 321/2 ”x321/2”
35mm
113/32”
50/80mm
132/32”/35/32”
250mm
10”
56Kg.
123,5Lb.∞DW-250-NL
(*4)152cm (*4)107x107cm •5927/32” 425/32”x425/32”
(*5) 65 mm
29/16”
120/230mm
43/4”/91/16” 12-14”
107 Kg.
235,9 Lb.∞ 300-350mm
(*4)84cm (*4)60x60cm •333/32” 235/8”x235/8”
(*5)71mm
213/16”
95/150mm
33/4”/529/32” 12-14”
63,5 Kg.
140 Lb.∞ 300-350mm
DR-350
DS-250 1000
DS-250 1300
DS-250 1500
(*3) With special decks for mitering.(*4) With Ø12” (300mm) blade, 13/32” (10mm) thick material and plunge effect. (*5) With Ø14” (350mm) blade.
DX-350 1000
DX-350 1300
66
67
ACCESSORIES AND SPARE PARTS FOR ELECTRIC CUTTERS•Sparepartsandaccessoriesforelectriccutters.
• Specially designed for blades to bring back the diamonds on the rim when cutting porcelain and large blades.
REF
N-Cleaning block 05974 5
N-Cleaning block
• For cleaning of diamond blades.
REF
Cleaning block 05973 5
Cleaning block
• Help to keep cleaner the working area.
REF
ND-180 Water tray 45305 5
ND-200 Water tray 45434 5
ND-300 Water tray 45534 1
ND Water trays
• Great accuracy when making miters cuts.• For machines DS-250/250-L and DS-300/300-L. (until 2008).• For machines DS-300 and DX-350 (since 2009). • For machines DW-N/NL.
REF
SetofflangesDS-250/250-LandDS-300/300-L(until2008) 57990 1
SetofflangesDS-300andDX-350 51915 1
SetofflangesDW-N/NL 57991 1
Setofflangesformiteringcuts.
• 68 mm. diameter flanges, for DX series, to increase thickness of cut.
REF
SetofflangesDX-350 54939 1
Setofspecialflanges
68
ACCESSORIES AND SPARE PARTS FOR ELECTRIC CUTTERS•Sparepartsandaccessoriesforelectriccutters.
• Supporting foldable table.• Improved working position and increases stability.
REF
DU-200-L Support table 25966 1
DU-200-L Support table
• For DW-N and DW-NL (ref. 57940)• For DS-250 and DX-350 (ref. 57949)• With rollers to simplify movement of the tiles. • With adjustable foldable legs.
REF
Roller table extension DW-N/NL 57940 1
Roller table extension DS/DX 57949 1
Roller table extension
• Increases work surface for large format of ceramic.• For DS and DX series (since 2009).
REF
Table extension DS/DX 54990 1
Table extension DS/DX
• Sets to mount on DS and DX series electric cutters.• For fixing of the ceramic and perfect cutting measure along its length.• Ensures a perfect finish without mistakes in dimensions
REF
TilefixingsetDS-2501000/DX-3501000 51911 1
TilefixingsetDS-2501300/DX-3501300 51912 1
TilefixingsetDS-2501500 51913 1
Tilefixingsets
• Allows the fixing of the ceramic during cutting, thus avoiding sudden movements.• Accessory adaptable to DS and DX series (since 2009).
REF
Tilefixer 51916 1
Tilefixer
69
Accessories And spAre pArts for electric cutters• Spare parts and accessories for electric cutters.
• Accessory to facilitate repetitive miter cutting.• Adaptable to DS and DX series (since 2009).
REF
Miter accessory DS/DX 56137 1
Miter accessory DS/DX
• Facilitates positioning of the ceramic, while reducing the percentage error.• Accessory adaptable to DW-250-NL (since 2012).
REF
Lateral stop 50 cm. DW-NL 54822 1
Lateral stop 50 cm. DW-NL
CabLeS With pLug
• Flexible PVC Cable 3 x 1.5 mm2.• 230 V, 13.9 A, 3500 W with thermal circuit breaker and 4 sockets (2P+T) Schuko
type.• IP-20.
REF
extension cord eC1 82 ft. (25 m.) /13,9a pLuS 83991 1
extension cord eC2 164 ft. (50 m.) /13,9a pLuS 83949 1
eXteNSioN CorDS eC-1/eC-2
• To ensure your order is placed correctly, please include both the reference of the machine with the required motor and the reference of the cable with the plug suitable for the country of destination.
• Approximate length 3.5 m.
Cable with plug 230/50 eur 58850 1
Cable with plug 380/50 eur 58851 1
Cable with plug 110/50 uK 58852 1
Cable with plug 230/50 uK 58853 1
Cable with plug 120/60 15a 12aWg uSa 58854 1
Cable with plug 220/60 15a 12aWg uSa 58856 1
Cable with plug 220/60 20a 12aWg uSa 58857 1
Cable with plug 240/50 auS 58859 1
Cable with plug 230/50 DK 58860 1
REF
70
Precise cutting on large format materials.
For dry and wet cutting of ceramic tiles and natural stone.
CIRCULAR SAW TC-180
• Practical cutter and easy to use for large pieces. 1.
• Double cooling system, wet and dry. Greater adaptability to environment.
2.
• Guiding mark for better visibility of the line of cut. 3.
• Easy adjustment of cutting thickness. Greater versatility and adaptability to the different materials.
4.
• Especially suitable for large pieces.• Allows the user to reduce manipulation, handling heavy or akward use. • Content: - Blade Ø180mm TURBO TSV type. - Parallel guide. - Cable with PRCD switch (differential). - Cone reducer for vacuum cleaner. - Transport case.
71
REFTC-180
50939 1 12 5800 1800 W 230V / 50-60Hz 2 5/32”
55 mm7 “
180 mm1 “
22.2 mm12 x17 23/32x14 31/32”
33x45x38 cm• •
148 Lb 6.7 kg
24 Lb 11 kg
Ref. Accessories
50956 Guide TC-180
50957 Guide connector
50958 Guides C-clamp
TC-180 Circular Saw
1
2
3
4
1
2
4
72
• Aluminum Guide for straight cuts.• Ability to connect multiple guides through the connector (Ref. 50957)
REF
Guide TC-180 50956 1 32 9/32x7 3/32x25/32”82x18.5x2 cm
2.78 Lb 1.26 kg
31 1/2” (80 CM.) GUIDE FOR TC-180
• Allows the connection of multiple guides to increase cutting lenght.
REF
Guide connector 50957 1
GUIDE CONNECTOR
• Highly recommended for fixing the guide on the ceramic and preventing movement through out the cut, thus achieving a cleaner cut.
REF
Fixing C-clamp 50958 1
FIXING C-CLAMP
73
For cutting and grinding of metals and building materials.
• Blade of Ø 9” (230 mm.) not included.• Safety switch.• Rapid fitting of protector.• Shaft locks to facilitate blade replacement.• Progressive starting to avoid bumps on start-up and overintensisty of the current.• Auxiliary handle (3 positions).
REF
Angle grinder A-230 25952 4 64 210-240V/50-60 Hz. 2200 W 5800 2 11/16”68 mm 230 14.8 Lb
6.7 kg
ANGLE GRINDER A-230
For wall chaising channels on construction site.
• Ideal machine for wall chasing channels easily.• Soft start to prevent jerking and overcurrent.• Depth of 40 mm.• Adjustable width of 7-40 mm.• Allows attachment to a vacuum to prevent dust generated.• Spindle lock for easy disc change.• 2 discs Ø 180 mm. (Not included).
REF
Wall chaser R-180-N2 240V 50/60 Hz 50968 1 24 210-240V/50-60 Hz. 2200 W 5800 1 9/16”40 mm
x7 “2x180 mm
15.2 Lb 6.9 kg
WALL CHASER R-180-N2
74
• Recommended for cutting building materials such as bricks, concrete, terrazzo.• A great combination. High performance and cutting speed with high standard
finishes.
REF
TSV 115 PRO 25917 1 5 “115 mm
1 “22.2 mm
3/32”2 mm
9/32”7 mm
TSV 125 PRO 31980 1 5 “125 mm
1 “22.2 mm
3/32”2.2 mm
9/32”7 mm
TSV 230 PRO 25918 1 9 “230 mm
1 “22.2 mm
3/32”2.5 mm
9/32”7 mm
TSV 115 SUPERPRO 31981 1 5 “115 mm
1 “22.2 mm
3/32”2 mm
9/32”7 mm
TSV 125 SUPERPRO 31982 1 5 “125 mm
1 “22.2 mm
3/32”2 mm
9/32”7 mm
TSV 230 SUPERPRO 31983 1 9 “230 mm
1 “22.2 mm
3/32”2.5 mm
9/32”7 mm
GENERAL PURPOSE TURBO DIAMOND BLADE (TSV)
• Recommended for cutting building materials such as brick, concrete, terrazzo.• The fastest. Maximum speed and best blade’s cooling. To cut materials with more
than 1” (25 mm.) thickness.• * Perforated steel blade to improve cooling and diminish cut’s tensions.
REF
SEV 115 PRO 25915 1 5 “115 mm
1 “22.2 mm
3/32”2.2 mm
9/32”7 mm
SEV 125 PRO 32940 1 5 “125 mm
1 “22.2 mm
3/32”2.2 mm
9/32”7 mm
SEV 180 PRO 25938 1 7 “180 mm
1 “22.2 mm
3/32”2.6 mm
9/32”7 mm
SEV 230 PRO 25916 1 9 “230 mm
1 “22.2 mm
3/32”2.6 mm
9/32”7 mm
SEV 115 SUPERPRO 32942 1 5 “115 mm
1 “22.2 mm
3/32”2.2 mm
13/32”10 mm
SEV 125 SUPERPRO 32943 1 5 “125 mm
1 “22.2 mm
3/32”2.2 mm
13/32”10 mm
SEV 230 SUPERPRO * 32948 1 9 “230 mm
1 “22.2 mm
3/32”2.6 mm
13/32”10 mm
GENERAL PURPOSE SEGMENTED DIAMOND BLADE (SEV)
• Recommended for cutting building materials such as brick, concrete, terrazzo.• ONE4ALL. To cut all kind of materials with maximum speed.
REF
TLR 115 31962 1 5 “115 mm
1 “22.2 mm
3/32”2.2 mm
9/32”7 mm
TLR 125 31963 1 5 “125 mm
1 “22.2 mm
3/32”2.2 mm
9/32”7 mm
TLR 230 31968 1 9 “230 mm
1 “22.2 mm
3/32”2.6 mm
13/32”10 mm
GENERAL PURPOSE TURBO LASER DIAMOND BLADE (TLR)
75
• Blade for general cut of ceramic tiles as wall tile, floor tiles, porcelain.• The best finish. To cut and miter ceramic tiles and other stone coating materials
with less than 1” (25 mm.) thickness.
REF
CSV 115 PRO 25910 1 5 “115 mm
1 “22.2 mm
1/32”1.7 mm
9/32”7 mm
CSV 125 PRO 31915 1 5 “125 mm
1 “22.2 mm
1/32”1.7 mm
9/32”7 mm
CSV 115 SUPERPRO 30882 1 5 “115 mm
1 “22.2 mm
1/32”1.7 mm
9/32”7 mm
CSV 125 SUPERPRO 30883 1 5 “125 mm
1 “22.2 mm
1/32”1.7 mm
9/32”7 mm
CSV 230 SUPERPRO 30888 1 9 “230 mm
1 “22.2 mm
1/32”1.7 mm
9/32”7 mm
CERAMIC TILES CONTINOUS RIM DIAMOND BLADE (CSV )
• Recommended blades to cut hard materials such as granite, rustic tiles, klinker, fire bricks, slate.
• A great combination. High performance and cutting speed with high standard finishes.
REF
TSA 115 PRO 31952 1 5 “115 mm
1 “22.2 mm
3/32”2 mm
9/32”7 mm
TSA 125 PRO 31953 1 5 “125 mm
1 “22.2 mm
3/32”2.2 mm
9/32”7 mm
TSA 180 PRO 31956 1 7 “180 mm
1 “22.2 mm
3/32”2.2 mm
9/32”7 mm
TSA 230 PRO 31958 1 9 “230 mm
1 “22.2 mm
3/32”2.5 mm
5/16”8 mm
TSA 230 SUPERPRO 31957 1 9 “230 mm
1 “22.2 mm
3/32”2.5 mm
5/16”8 mm
HARD MATERIALS TURBO DIAMOND BLADE (TSA)
• Recommended blades to cut hard materials such as granite, rustic tiles, klinker, fire bricks, slate.
• The fastest. Maximum speed and best blade’s cooling. To cut materials with more than 1” (25 mm.) thickness.
REF
SHA 115 PRO 32922 1 5 “115 mm
1 “22.2 mm
3/32”2.2 mm
9/32”7 mm
SHA 125 PRO 32923 1 5 “125 mm
1 “22.2 mm
3/32”2.2 mm
9/32”7 mm
SHA 230 PRO 32928 1 9 “230 mm
1 “22.2 mm
3/32”2.6 mm
9/32”7 mm
SHA 180 SUPERPRO 32926 1 7 “180 mm
1 “22.2 mm
3/32”2.6 mm
9/32”7 mm
SHA 230 SUPERPRO 32929 1 9 “230 mm
1 “22.2 mm
3/32”2.6 mm
15/32”12 mm
HARD MATERIALS SEGMENTED DIAMOND BLADE (SHA)
76
• Recommended blade to cut fine porcelain tiles with less than 1” (25 mm.) thickness.
• The best finish.
REF
CPR 115 SUPERPRO 30972 1 5 “115 mm
1 “22.2 mm
1/32”1.7 mm
9/32”7 mm
CPR 125 SUPERPRO 30973 1 5 “125 mm
1 “22.2 mm
1/32”1.7 mm
9/32”7 mm
PORCELAIN TILES CONTINOUS RIM DIAMOND BLADE (CPR)
• Recommended blade to cut fine porcelain tiles.• A great combination. High performance and cutting speed with high standard
finishes. Only for straight cut, not suitable for miter.
REF
TCR 115 SUPERPRO 31972 1 5 “115 mm
1 “22.2 mm
1/32”1.2 mm
9/32”7 mm
TCR 125 SUPERPRO 31973 1 5 “125 mm
1 “22.2 mm
1/32”1.2 mm
9/32”7 mm
TCR 180 SUPERPRO 31975 1 7 “180 mm
1 “22.2 mm
1/32”1.2 mm
9/32”7 mm
TCR 230 SUPERPRO 31978 1 9 “230 mm
1 “22.2 mm
1/32”1.2 mm
9/32”7 mm
PORCELAIN TILES TURBO DIAMOND BLADE (TCR)
• Recommended blades to cut abrasive materials such as bricks, calcareous terrazzo, marble, sandstone.
REF
SON 115 SUPERPRO 32902 1 5 “115 mm
1 “22.2 mm
3/32”2.2 mm
9/32”7 mm
SON 125 SUPERPRO 32903 1 5 “125 mm
1 “22.2 mm
3/32”2.2 mm
9/32”7 mm
SON 230 SUPERPRO 32908 1 9 “230 mm
1 “22.2 mm
3/32”2.6 mm
9/32”7 mm
ABRASIVE MATERIALS SEGMENTED DIAMOND BLADE (SON)
• Recommended electroplated diamond blade to cut marble, limestone and fibers.• Less vibration. To cut those materials with high risk of breaking, as marble and
fibers.
REF
EMG 115 SUPERPRO 30995 1 5 “115 mm
1 “22.2 mm
3/32”2.5 mm
1/8”3 mm
EMG 125 SUPERPRO 30996 1 5 “125 mm
1 “22.2 mm
3/32”2.5 mm
1/8”3 mm
EMG 230 SUPERPRO 30997 1 9 “230 mm
1 “22.2 mm
1/8”3 mm
1/8”3 mm
MARBLE ELECTROPLATED DIAMOND BLADE (EMG)
77
• Recommended for cutting building materials such as brick, concrete, terrazzo.• The fastest. Maximum speed and best blade’s cooling. To cut materials with more
than 1” (25 mm.) thickness.
REF
SHR 300 PRO 32972 1 12 “300 mm
1 “25.4 mm
3/32”2.6 mm
13/32”10 mm
SHR 350 PRO 32973 1 14 “350 mm
1 “25.4 mm
1/8”3 mm
13/32”10 mm
SHR 300 SUPERPRO 32970 1 12 “300 mm
1 “25.4 mm
3/32”2.6 mm
13/32”10 mm
SHR 350 SUPERPRO 32971 1 14 “350 mm
1 “25.4 mm
1/8”3 mm
13/32”10 mm
GENERAL PURPOSE SEGMENTED DIAMOND BLADE (SHR)
• Blade for general cut of ceramic tiles as wall tile, floor tiles, porcelain.• The best finish. To cut and miter ceramic tiles and other stone coating materials
with less than 1” (25 mm.) thickness.
REF
CEV 125 PRO 25911 1 5 “125 mm
1 “22.2 mm
1/32”1.7 mm
9/32”7 mm
CEV 180 PRO 25912 1 7 “180 mm
1 “25.4 mm
1/32”1.7 mm
9/32”7 mm
CEV 200 PRO 25913 1 8 “200 mm
1 “25.4 mm
1/32”1.7 mm
9/32”7 mm
CEV 230 PRO 25914 1 9 “230 mm
1 “22.2 mm
3/32”2 mm
9/32”7 mm
CEV 250 PRO 25934 1 10 “250 mm
1 “25.4 mm
3/32”2.2 mm
9/32”7 mm
CEV 250 USA PRO 55802 1 10 “250 mm
1 “16 mm
1/32”1.7 mm
9/32”7 mm
CEV 300 PRO 25935 1 12 “300 mm
1 “25.4 mm
3/32”2.2 mm
13/32”10 mm
CEV 115 SUPERPRO 30942 1 5 “115 mm
1 “22.2 mm
1/32”1.7 mm
9/32”7 mm
CEV 125 SUPERPRO 30943 1 5 “125 mm
1 “22.2 mm
1/32”1.7 mm
9/32”7 mm
CEV 180 SUPERPRO 30945 1 7 “180 mm
1 “22.2 mm
1/32”1.7 mm
9/32”7 mm
CEV 200 SUPERPRO 30946 1 8 “200 mm
1 “25.4 mm
1/32”1.7 mm
9/32”7 mm
CEV 230 SUPERPRO 30948 1 9 “230 mm
1 “22.2 mm
3/32”2 mm
9/32”7 mm
CEV 250 SUPERPRO 30949 1 10 “250 mm
1 “25.4 mm
3/32”2.2 mm
9/32”7 mm
CEV 300 SUPERPRO 30950 1 12 “300 mm
1 “25.4 mm
3/32”2.2 mm
13/32”10 mm
CEV 350 SUPERPRO 30951 1 14 “350 mm
1 “25.4 mm
3/32”2.6 mm
13/32”10 mm
CERAMIC TILES CONTINOUS RIM DIAMOND BLADE (CEV)
78
• Blades recommended for Hard Materials such as porcelain, Granite and slate with less than 1” (25mm) thickness.
• The best finish. To cut and miter ceramic tiles and other stone coating materials with less than 1” (25 mm.) thickness.
REF
CPA 125 SUPERPRO 30923 1 5 “125 mm
1 “22.2 mm
1/32”1.7 mm
9/32”7 mm
CPA 180 SUPERPRO 30925 1 7 “180 mm
1 “22.2 mm
1/32”1.7 mm
9/32”7 mm
CPA 200 SUPERPRO 30926 1 8 “200 mm
1 “25.4 mm
1/32”1.7 mm
9/32”7 mm
CPA 230 SUPERPRO 30928 1 9 “230 mm
1 “22.2 mm
3/32”2 mm
9/32”7 mm
CPA 250 SUPERPRO 30929 1 10 “250 mm
1 “25.4 mm
3/32”2.2 mm
9/32”7 mm
CPA 300 SUPERPRO 30930 1 12 “300 mm
1 “25.4 mm
3/32”2.2 mm
13/32”10 mm
CPA 350 SUPERPRO 30931 1 14 “350 mm
1 “25.4 mm
3/32”2.6 mm
13/32”10 mm
HARD MATERIALS CONTINOUS RIM DIAMOND BLADE (CPA)
• Recommended blade to cut fine porcelain tiles with less than 1” (25 mm.) thickness.
• Specially recommended for miter cutting.
REF
CPC 180 PRO 30955 1 7 “180 mm
1 “22.2 mm
1/32”1.7 mm
9/32”7 mm
CPC 200 PRO 30956 1 8 “200 mm
1 “25.4 mm
1/32”1.7 mm
9/32”7 mm
CPC 230 PRO 30958 1 9 “230 mm
1 “22.2 mm
3/32”2 mm
9/32”7 mm
CPC 250 PRO 30959 1 10 “250 mm
1 “25.4 mm
3/32”2.2 mm
9/32”7 mm
CPC 300 PRO 30960 1 12 “300 mm
1 “25.4 mm
3/32”2.2 mm
13/32”10 mm
CPC 350 PRO 30961 1 14 “350 mm
1 “25.4 mm
3/32”2.6 mm
13/32”10 mm
CONTINUOUS DIAMOND FOR PORCELAIN (CPC)
• Recommended disc to cut fine porcelain tiles.• Hight Tech. High speed on straight cuts on porcelain tiles.• Only for straight cut, not recommended for miter cuts.
REF
CPX 200 PRO 30964 1 8 “200 mm
1 “25.4 mm
1/32”1.6 mm
9/32”7 mm
CPX 250 PRO 30962 1 10 “250 mm
1 “25.4 mm
1/32”1.6 mm
9/32”7 mm
CPX 300 PRO 30963 1 12 “300 mm
1 “25.4 mm
1/32”1.6 mm
9/32”7 mm
PORCELAIN TILES J-SLOT DIAMOND BLADE (CPX)
79
• Recommended blades to cut abrasive materials such as bricks, calcareous terrazzo, marble, sandstone.
• A great combination. High performance and cutting speed with high standard finishes.
REF
TON 200 SUPERPRO 31906 1 8 “200 mm
1 “25.4 mm
3/32”2.5 mm
9/32”7.5 mm
TON 250 SUPERPRO 31909 1 10 “250 mm
1 “25.4 mm
3/32”2.5 mm
9/32”7.5 mm
TON 300 SUPERPRO 31910 1 12 “300 mm
1 “25.4 mm
1/8”3 mm
9/32”7.5 mm
ABRASIVE MATERIALS TURBO DIAMOND BLADE (TON)
CONTINUOUS RIM
SEGMENTED
ELECTROPLATED
TURBO
TURBO LASER
J-SLOT
The best finish. for cutting and mitering ceramic tiles and other stone coating materials <1” (25mm) thickness.
The Fastest. Maximum speed and best blade’s cooling. To cut materials >1” (25mm) thickness.
Less vibration. To cut those materials with high risk of breaking as marble or fibres.
A great combination. High performance and speed of cut with high quality finishings.
ONE4ALL. To cut all kind of materials with maximum speed.
High-Tech. High speed on hardest materials.
Specially designed for straight cuts on Porcelain tiles.
TYPES AND USES OF DIAMOND BLADES
CONTINUOUS RIM TURBO SEGMENTED TURBO LASER
ELECTRO-PLATED
Alternative useIdeal use
Concrete Pipe/Fibre cement
Siliceous terrazzo
Calcareous terrazzo
Concrete roof tiles
Glazed roof tile
Traditional roof tile
Slate
Volcanic rock/Sandstone
Marble
Fireproof brick
Facade brick “Covadonga”
Facade brick
Vitreous materials, glass tile
Cellular concrete
Cured concrete
Fresh concrete
Reinforced concrete
Granite
Rustic Tile
Extruded tiles
Porcelain tile
Floor tile
Wall tile
Siliceous asphalt
Calcareous asphalt
CSV TSV SEVCPR TSA SHATCR SON TLR EMG
APPLICATION AND USE GUIDE
80
Concrete Pipe/Fibre cement
Siliceous terrazzo
Calcareous terrazzo
Concrete roof tiles
Glazed roof tile
Traditional roof tile
Slate
Volcanic rock/Sandstone
Marble
Fireproof brick
Facade brick “Covadonga”
Facade brick
Vitreous materials, glass tile
Cellular concrete
Cured concrete
Fresh concrete
Reinforced concrete
Granite
Rustic Tile
Extruded tiles
Porcelain tile
Floor tile
Wall tile
Siliceous asphalt
Calcareous asphalt
Alternative use Ideal use
CEV CPA CPC CPX TON SHR
TURBOJ-SLOT SEGMENTEDCONTINUOUS RIM
APPLICATION AND USE GUIDE
81
1
2
3
4
Meaning
Grain size
Hardness scale
Phenolic resins
Material to be cut
A Corundum Metal
C Silicon carbide Building materials (non-ferrous)
FC Silicon carbide / Corundum Steel / Iron / Building materials
Thick
A -
Fine
+ Z
A
1
24
2
T
3
bf
4
ABRASIVE BLADES SYMBOLOGY
82
83
• Abrasive blade to cut building materials/stone.• 3/16” (3.2 mm.) thickness.
REF
Building cutting blade C30S BF-115 33902 1 5 “115 mm
1 “22.2 mm
Building cutting blade C24T BF-180 33905 1 7 “180 mm
1 “22.2 mm
Building cutting blade C24T BF-230 33908 1 9 “230 mm
1 “22.2 mm
BUILDING MATERIALS/STONE CUT ABRASIVE BLADE
• Abrasive blade to cut steel.• 3/16” (3.2 mm.) thickness.
REF
Steel cutting blade A30S BF-115 33922 1 5 “115 mm
1 “22.2 mm
Steel cutting blade A24T BF-180 33925 1 7 “180 mm
1 “22.2 mm
Steel cutting blade A24T BF-230 33928 1 9 “230 mm
1 “22.2 mm
STEEL CUT ABRASIVE BLADE
• Abrasive blade to cut steel/stainless steel. • 1/16” (1 mm.) thickness.
REFSteel/stainless steel cutting blade A46RK BF-115 34956 1 5 “
115 mm1 “
22.2 mm
STEEL/STAINLESS STEEL CUT ABRASIVE BLADE
PERFORATION
TOOLS FOR DRILLING TILES, STONEWARE, MARBLE, GRANITE, AND OTHER MATERIALS.
86
DIAMOND DRILL BITS Ø 13/16” TO 4 3/4” (20 - 120 MM.)• To drill Floor tiles, Porcelain tiles, Granite and Marble.• Always use cooled with water and non-hammer electric drill.• Ø 1 5/8” (40 mm.) drill bit, designed for housing of toilet flushing mechanisms. Supplied in blister.
REF
Diamond drill bit 13/16” (20 mm.) 04970 1
Diamond drill bit 1 1/8” (28 mm.) 04971 1
Diamond drill bit 1 3/8” (35 mm.) 04972 1
Diamond drill bit 1 5/8” (40 mm.) 04963 1
Diamond drill bit 1 3/4” (43 mm.) 04981 1
Diamond drill bit 2” (50 mm.) 04973 1
Diamond drill bit 2 1/4” (55 mm.) 04989 1
Diamond drill bit 2 3/8” (60 mm.) 04987 1
Diamond drill bit 2 1/2” (65 mm.) 04974 1
Diamond drill bit 2 11/16” (68 mm.) 04918 1
Diamond drill bit 3” (75 mm.) 04975 1
Diamond drill bit 3 3/4” (95 mm.) 04988 1
Diamond drill bit 4” (100 mm.) 04976 1
Diamond drill bit 4 3/4” (120 mm.) 04977 1
• Kit includes:• MULTIDRILL Guide.• Tank and hose.• Diamond drill bits Ø 13/16”, 1 1/8”, 1 3/8”, 1 3/4”, 2” and 2 1/2” (Ø 20, 28, 35, 43,
50, 65 mm.).• Case.
REF
Kit FORAGRES 50903 1
KIT FORAGRES
87
DETACHABLE DIAMOND DRILL BITS• For drilling stoneware, porcelain, granite and marble.• Always use water and electric drill without hammer.• Necessary to use 1/2” threaded head (Ref. 04937).• Necessary to use the SWIVEL CONNECTOR (Ref. 50907).• Supplied in blister.
REF
Diamond drill bit replacement 1/4” (6 mm.) 04930 1
Diamond drill bit replacement 5/16” (8 mm.) 04931 1
Diamond drill bit replacement 13/32” (10 mm.) 04932 1
Diamond drill bit replacement 1/2” (12 mm.) 04933 1
Diamond drill bit replacement 9/16” (14 mm.) 04934 1
• Adapter for detachable diamond drill bits.• Necessary to use with SWIVEL CONNECTOR (Ref. 50907).• Thread 1/2” GAS.
REF
Detachable diamond drill bit head Ø 1/4” to 9/16” (6 - 14mm.). 04937 1
DETACHABLE DIAMOND DRILL BIT HEAD
• Kit includes:• Swivel connector.• MULTIDRILL Guide.• Replacements for detachable diamond drills Ø 1/4”, 5/16” and 13/32” (6, 8, 10
mm.)• Head with 1/2” GAS thread.• Case.
REF
Kit MINIGRES 50909 1
KIT MINIGRES
88
EASY GRES DRILL BITS Ø7/32” TO 1/2” (6-12 MM.)• Diamond drill bits to be used with electric drill without hammer. • The quality of the diamond allows the drilling of ceramics, porcelain, granite, marble and glass. • Ideal to install bathroom accessories and any type of decorative accessories over ceramic surfaces. • They must always be used with the EASY GRES guide which allows their adecuate refrigeration ensuring a high accuracy and good
results. • Average life between 5 and 10 holes depending on the material.• Body made of steel and bit made of electrodeposited diamond.• Lateral opening to improve cooling of the drill bit and to allow the elimination of solid waste produced after the drilling of the hole.• Recommended speed of use between 400 and 1000 r.p.m. depending of the material to be drilled.• To achieve a better finish and a longer life of the drill bit, it’s important to observe the adequate speed of use and to apply a
moderate pressure during the drilling.• Supplied in blister.
REF
Diamond drill bit 7/32” (6 mm.) 04922 10
Diamond drill bit 1/4” (6.5 mm.) 04920 10
Diamond drill bit 5/16” (8 mm.) 04923 10
Diamond drill bit 3/8” (10 mm.) 04924 10
Diamond drill bit 1/2” (12 mm.) 04921 10
• The EASY GRES guide allows holes both vertically and horizontally, thanks to its functional design incorporating a water tank with flow control valve.
• The EASY GRES guide attaches easily to any surface, thanks to its renewable adhesives.
REF
EASY GRES drill bit 7/32” (6 mm.) set 04927 10 1000 max. 31/32”25 mm
EASY GRES drill bit 1/4” (6.5 mm.) set 04925 10 1000 max. 31/32”25 mm
EASY GRES drill bit 5/16” (8 mm.) set 04928 10 1000 max. 31/32”25 mm
EASY GRES drill bit 3/8” (10 mm.) set 04929 10 1000 max. 31/32”25 mm
EASY GRES drill bit 1/2” (12 mm.) set 04926 10 1000 max. 31/32”25 mm
EASY GRES drill bit 7/32” and 3/8” (6 and 10 mm.) set 04919 10 1000 max. 31/32”
25 mm
EASY GRES drill bit 1/4” and 3/8” (6.5 and 10 mm.) set 04909 10 1000 max. 31/32”
25 mm
Replacement adhesives for EASY GRES 20 u. 04999 10
EASY GRES DRILL BIT SETS Ø 7/32” TO 1/2” (6 - 12 MM.)
89
EASY GRES DRILL BITS Ø 13/16” TO 4 3/4” (20 - 120 MM.)• Electroplated diamond drills for use with electric drill without hammer.• The quality of the diamond permits drilling stoneware, porcelain, granite, marble and glass.• Always use water-cooled.• The use of the MULTIDRILL guide (Ref. 50944) and the water tank (Ref. 50947) to cool and prevent movement of the drill bit
during drilling getting good finishes.• The working speed varies between 400 and 1000 r.p.m., depending on the material to be drilled.• Average life of 10 holes, depending on the material.• Body in steel and electroplated diamond tips.• Lateral opening for improved cooling and allow the removal of solid waste after each hole.• For a better finishing and longer bit life, it is important to respect the right speed and moderate pressure during drilling.• Supplied in blister.
REF
Diamond drill bit 13/16” (20 mm.) 05961 1
Diamond drill bit 1 1/8” (28 mm.) 05962 1
Diamond drill bit 1 3/8” (35 mm.) 05963 1
Diamond drill bit 1 5/8” (40 mm.) 05964 1
Diamond drill bit 1 3/4” (43 mm.) 05965 1
Diamond drill bit 2” (50 mm.) 05966 1
Diamond drill bit 2 1/4” (55 mm.) 05967 1
Diamond drill bit 2 1/2” (65 mm.) 05969 1
Diamond drill bit 2 11/16” (68 mm.) 05978 1
Diamond drill bit 3” (75 mm.) 05979 1
Diamond drill bit 4” (100 mm.) 05981 1
Diamond drill bit 4 3/4” (120 mm.) 05982 1
90
• The kit includes:• MULTIDRILL guide.• Water tank and hose.• EASY GRES drills Ø 13/16”, 1 1/8”, 1 3/8”, 1 3/4”, 2”, 2 1/2” and 3” (20, 28, 35, 43, 50, 65 and 75 mm.) and case.
REF
Kit EASY GRES PLUS 50937 10 800 500 max. 2 3/4”70 mm
KIT EASY GRES PLUS
• The kit includes:• MULTIDRILL guide.• Water tank and hose.• EASY GRES drill bit Ø 1 3/8” (35 mm.)
REF
EASY GRES drill bit Ø 1 3/8” (35 mm.) set 50921 1 720 2 3/4”70 mm 500 max.
EASY GRES DRILL BIT Ø 1 3/8” (35 MM.) SET
91
DRY CUT DIAMOND DRILL BITS• For drilling in dry wall, stoneware and porcelain tiles.• Maximum operating speed 14,000 r.p.m. M14 thread finish. Usable with grinder (direct connection) or electric drill (adapter ref.
05976). Supplied in blister.
REF
Dry cut diamond drill bit 1/4” (6 mm.) 05988 1
Dry cut diamond drill bit 5/16” (8 mm.) 05989 1
Dry cut diamond drill bit 3/8” (10 mm.) 05990 1
Dry cut diamond drill bit 1/2” (12 mm.) 05991 1
Dry cut diamond drill bit 13/16” (20 mm.) 04910 1
Dry cut diamond drill bit 1 1/8” (28 mm.) 04911 1
Dry cut diamond drill bit 1 3/8” (35 mm.) 04912 1
Dry cut diamond drill bit 1 3/8” (35 mm.) (USA) 05987 1
Dry cut diamond drill bit 1 3/4” (43 mm.) 04913 1
Dry cut diamond drill bit 2” (50 mm.) 04914 1
Dry cut diamond drill bit 2 3/8” (60 mm.) 04915 1
Dry cut diamond drill bit 2 1/2” (65 mm.) 04916 1
Dry cut diamond drill bit 2 11/16” (68 mm.) 04917 1
Dry cut diamond drill bit 3” (75 mm.) 05992 1
M14 adapter for electric drill 05976 1
• The kit includes:• MULTIDRILL guide.• EASY GRES drills Ø 1 1/8”, 1 3/8”, 1 3/4” and 2 1/2” (28, 35, 43 and 65 mm.)• With case.
REF
Kit DRY GRES 50917 1
KIT DRY GRES
92
• Support for electric drill.• For the use of diamond drill bits for drilling stoneware, porcelain and granite.• Drill adapter (Ref. 50915) included.
REF
FORAGRES guide 50900 1
FORAGRES GUIDE
• By fixing with sucker, allows horizontal and vertical holes in the right place, preventing the drill bit from slipping.
• Compatible with dry cutting diamond drill bits, removable diamond drill bits Ø 1/4” to 9/16” (6-14 mm.) and wet cutting diamond drill bits Ø 13/16” to 3” (20-75 mm.).
• Includes hose and tank connection (Ref. 50947).
REF
MULTIDRILL guide 50944 1
MULTIDRILL GUIDE
• Adaptable to electric drill. Allows vertical and horizontal drilling in stoneware, porcelain tiles and granite using detachable diamond drill bits Ø 1/4”, 5/16”, 13/32”, 1/2” and 9/16” (6, 8, 10 12 and 14 mm.).
REF
Swivel connector 50907 1
SWIVEL CONNECTOR
• Bottle of 1200 ml. volume, with manual pressure pump.• Includes 2 m. hose.
REF
Tank and hose for MULTIDRILL guide 50947 1
TANK FOR MULTIDRILL GUIDE
93
• Mechanism to avoid dust when dry drilling.• 1,2 l. of pressurized water tank .• Can be used with drill bits for dry cutting with a max. diameter of 2 1/2” (65
mm.).
REF
Antidust set 50929 1
Antidust set
• For the use of dry cutting diamond drill bit with electric drill. ( M14 )• Use without hammer.
REF
M14 adapter for electric drill 05976 1
electric drill AdApter
• For FORAGRES and MULTIDRILL guides. • Dimensions: 21 3/8” x 15 3/8” x 3 9/16” (54 x 39 x 9 cm.).
REF
FOrAGres/Multidrill guides water tray 50134 1
WAter trAy
94
• Tungsten carbide drill bits for Wall tiles.• Adaptable to manual drill and head for use with electric drill without hammer (ref.
04992).
REF
Drill bit 1” (27 mm.) 04960 5
Drill bit 1 3/8” (35 mm.) 04962 5
Drill bit 1 3/4”(45 mm.) 04964 5
Drill bit 2 1/4” (55 mm.) 04965 5
Drill bit 2 1/2” (65 mm.) 04966 5
Drill bit 2 3/4” (70 mm.) 04967 5
Drill bit 3 1/4” (85 mm.) 04968 5
TUNGSTEN CARBIDE DRILL BITS
• It consists of head with central drill attachment and Tungsten Carbide drill bits of Ø 1”, 1 3/8”, 1 3/4”, 1 3/4”, 2 1/2”, 2 3/4” and 3 1/4” (27, 35, 45, 55, 65, 70 and 85 mm.), with plastic case.
REF
Drill bit set with case 04995 1
DRILL BIT SET WITH CASE
• Sets with adapter head, central attachment drill bit and Tungsten Carbide drill bit.
REF
Head with 1” (27 mm.) drill bit 04990 10
Head with 1 3/8” (35 mm.) drill bit 04991 5
ADAPTER HEAD AND DRILL BIT SETS
• Ref. 04993 drill bit with Tungsten Carbide tip for use with electric drill without hammer.
• Attachable to all measures of Tungsten Carbide drill bits.• Supplied in blister.
REF
Head with central attachment drill bit 04992 10
Central attachment drill bit for head 04993 10
HEAD AND CENTRAL ATTACHMENT DRILL BIT
28
28
35
35
40
40
43
43
50
50
55
55
6065
65
68
68
9575
75
100
100
120
120
6
6
8
86,5
10
10
12
12
14
20
20
Bet-ween 400 and
1.000
max 12.000
max 900
max 500
max 450
04930
04931
04932
04933
04934
0497004971049720496304981049730498904987049740491804975049880497604977
04927049250492804929
04926
059610596205963
0596505964
05966059670596905978059790598105982
11/8”
11/8”
13/8”
13/8”
15/8”
15/8”
13/4”
13/4”
21/4”
21/4”
21/2”
21/2”
23/18”
30 13/16”
30 13/16”
30 13/16”
30 13/16”
30 13/16”
30 13/16”
30 13/16”
30 13/16”
30 13/16”
30 13/16”
30 13/16”
30 13/16”
33 15/16”
33 15/16”
211/16”
211/16”
33/4”
43/4”
43/4”
2”
2”
3”
3”
4”
4”
14/64”
14/64”
5/16”
5/16”
1/4”
13/32”
13/32”
1/2”
3/4”
3/4”
1/2”
9/16” E
ASY
GR
ESFO
RA
GR
ES
DIAMOND DRILL BITS
3513/8”
7023/4”
251”
ELECTRIC DRILL Without percussion with Swivel Connector (Ref. 50907)
DIAMOND DRILL BIT HEAD. (Ref. 04937)
ELECTRIC DRILL Without percussion
ELECTRIC DRILL Without percussion
ELECTRIC DRILL Without percussion
USE with Foragres drilling guide (Ref. 50900)
USE with Multidrill drilling guide + Water tank and hose (Ref. 50944 + 50947)
USE with Multidrill drilling guide + Water tank and hose (Ref. 50944 + 50947)
Easy Gres guide (Included)
USE with Multidrill dri-lling guide (Ref. 50944)
Ceramic tiles
Porcelain tiles
Granite
Marble
Porcelain tiles
Stoneware
Granite
Marble
Glass
+
+
Max. drilling depth Recommended Speed
TUNGSTEN CARBIDE
DRILL BITS
Ømminch
REF USE MATERIALS
DRILL BITS CHARACTERISTICS
6
20
27
8
28
35
10
35
45
12
43
55
506065
65
6875
7085
05988
04910
04960
05989
04911
04962
max14.000
max800
05990
04912
04964
05991
04913
04965
0491404915
04966
049160491705992
04967
04968
11/8”
13/8”
13/8”
13/4”
13/4”
21/4”
21/2”
11/2”
23/18”
211/18”
3”
23/4”
31/4”
2”
14/64”
5/16”
13/32”
1/2”
3/4”
1”
DRY
GR
ES 3617/16”
1813/16”
Ceramic materials
Ceramic tiles
Porcelain tiles
Wall tiles
GRINDER
MULTIDRILL GUIDE
DRY CUTTING ADAPTER for electric drill (Ref. 05976)
ELECTRIC DRILL Without percussion and adapter (Ref. 04992)
ELECTRIC DRILL Without percussion
mminch
95
MIXING
ELECTRIC MIXERS
MIXING PADDLES
98
1
2
3
4
Mixer RUBIMIX-50-N
RUBIMIX-50-NFor mortars, facade coating mortar and tile adhesive.
• Powerful built-geared motor. High operating autonomy. 1.
• High mixing capacity. Higher performance. 2.
• Equipped with automatic stop-opening cover. Increased security. 3.
• Built-in handle and wheels. Easier transport. 4.
• With double thermal protection device.• Blade speed: 60 r.p.m.• For mixing up to 110 Lb. (50 kg.) of mortar (adhesive, facing cement, etc.)• Integrated gearbox design for better performance in the transmission.• Compact and easy to transport.
REF
RUBIMIX-50 N 230/50 61950 1 2 880 W 230v 50 hZ. 78.3 Lb 35.5 kg
RUBIMIX-50 N 220/60 61951 1 2 880 W 220V 60 hZ. 78.3 Lb 35.5 kg
RUBIMIX-50 N 120/60 USA 61954 1 2 880 W 120V 60 Hz.USA 78.3 Lb 35.5 kg
Autonomous mixer of great capacity.
99
12
3
4
Mixer RUBIMIX-9
RUBIMIX-9For cementitious adhesives, resins, paints and other materials.
• Bimaterial double handle grip. Improved ergonomics and comfort. 1.
• 2 speed gearbox and electronic controller to optimize the mixing of each material. 2.
• Interchangeable mixing paddle with M14 connection. Greater versatility. 3.
• Made of lightweight and durable materials for maximum reliability. 4.
• Power: 1200 W.• Double insulation.• Direct connection M14 thread.• Electronic regulator (1st 0-620 r.p.m. / 2nd 0-810 r.p.m.).• Ø maximum paddle: 140 mm.• Ø 4 3/4” (120 mm.) mixing paddle included.• The machine will be manufactured in red colour throughout the year.
REF
RUBIMIX-9 230V 50/60HZ 25940 2 24 1200 W 210-240V 50-60 Hz. 1ª 0-620 / 2ª 0-810 12.1 Lb 5.5 kg
RUBIMIX-9 110V 50/60HZ UK 25942 2 24 1200 W 110V-120V 50-60 Hz. UK. 1ª 0-620 / 2ª 0-810 12.1 Lb 5.5 kg
RUBIMIX-9 220V 50/60HZ UK 25944 2 24 1200 W 210V-240V 50-60 Hz.UK. 1ª 0-620 / 2ª 0-810 12.1 Lb 5.5 kg
RUBIMIX-9 120V 50/60HZ USA 25948 2 24 1200 W 110-130V 50-60 Hz. 1ª 0-620 / 2ª 0-810 12.1 Lb 5.5 kg
RUBIMIX-9 120V 50/60HZ USA + chuck 24949 2 24 1200 W 110-120V 50-60 Hz. 1ª 0-620 / 2ª 0-810 12.3 Lb 5.6 kg
Versatility by changing the mixing paddle.
100
1
2
3
4
Mixer RUBIMIX-9-PLUS
RUBIMIX-9 PLUSFor cementitious adhesives, resins, paints and other materials.
• Powerful 1600W motor for greater mixing capacity and high reliability. 1.
• Bimaterial double handle grip. Improved ergonomics and comfort. 2.
• 2 speed gearbox and electronic controller to optimize the mixing of each material. 3.
• Interchangeable mixing paddle with M14 connection. Greater versatility. 4.
• Electric mixer for mortar of great power: 1600W.• Double insulation.• Direct connection M14 thread.• Electronic regulator (1st 0-430 r.p.m. / 2nd 0-570 r.p.m.).• Ø maximum paddle: 160 mm.• Ø 5 1/2” (140 mm.) mixing paddle included.• In the verison with case the paddle included is Ø 4 3/4” (120 mm.).• Weight: 5.8 kg.• The machine will be manufactured in red colour throughout the year.
REF
RUBIMIX-9 PLUS 230/240V-50/60Hz. 24960 2 24 1600 W 230-240V 50-60Hz. 12.8 Lb 5.8 kg
RUBIMIX-9 PLUS 230/240V-50/60Hz. UK 24961 2 24 1600 W 230-240V 50-60Hz. UK 12.8 Lb 5.8 kg
RUBIMIX-9 PLUS 110/120V-50/60Hz. UK 24962 2 24 1600 W 110-120V 50-60Hz. UK 12.8 Lb 5.8 kg
RUBIMIX-9 PLUS 230/240V-50/60Hz. 24963 2 20 1600 W 230-240V 50-60Hz. • 12.8 Lb 5.8 kg
RUBIMIX-9 PLUS 230/240V-50/60Hz. UK 24964 2 20 1600 W 230-240V 50-60Hz. UK • 12.8 Lb 5.8 kg
RUBIMIX-9 PLUS 110/120V-50/60Hz. UK 24965 2 20 1600 W 110-120V 50-60Hz. UK • 12.8 Lb 5.8 kg
More power and performance.
101
1
2
3
4
Mixer RUBIMIX-9-DUPLEX
RUBIMIX-9 DUPLEXFor cementitious adhesives and other materials.
• Bimaterial double handle grip. Improved ergonomics and comfort. 1.
• Electronic control to optimize mixing. 2.
• Double mixing paddle to increase work performance. 3.
• Made of lightweight and durable materials for maximum reliability. 4.
• Power: 1350 W.• Double insulation.• 1 Speed and electronic regulator: 0-480 r.p.m.• Ø maximum paddle: 120 mm. x 2• Mixers paddles of Ø 4 3/4” included (120 mm.).• The machine will be manufactured in red colour throughout the year.
REF
RUBIMIX-9 DUPLEX 230V 50/60HZ 25943 1 12 1350 W 210-240V 50-60 Hz. 0-480 15 Lb 6.8 kg
Maximum performance with less effort.
102
• To mix cement mortars.• Adaptable to RUBIMIX portable range by chuck (Ref. 71967).
REF
Mortar mixer paddle M-80 65929 6 22-33 Lb 10-15 kg
15 3/4”400 mm
3 5/32”80 mm
Mortar mixer paddle M-100 65930 6 33-44 Lb 15-20 kg
15 3/4”400 mm
3 15/16”100 mm
Mortar mixer paddle M-100-L 73922 6 33-44 Lb 15-20 kg
29 29/32”760 mm
3 15/16”100 mm
MORTAR MIXER PADDLE - HEXAGONAL ROD
• To mix cement mortars.• M14x2 thread connection.• Adaptable directly RUBIMIX-9/9 PLUS and other brands.
REF
Mortar mixer paddle M-100-R 72934 6 33-44 Lb 15-20 kg
15 3/4”400 mm
3 15/16”100 mm
Mortar mixer paddle M-120-R 72935 2 33-55 Lb 15-25 kg
15 3/4”400 mm
4 23/32”120 mm
Mortar mixer paddle M-140-R 72936 2 55-88 Lb 25-40 kg
15 3/4”400 mm
5 1/2”140 mm
Mortar mixer paddle M-160-R 72937 2 66-132 Lb 30-60 kg
15 3/4”400 mm
6 5/16”160 mm
MORTAR MIXER PADDLE - M14 THREAD
• To mix cement mortars.• Adaptable to RUBIMIX-9/9 PLUS by chuck (Ref. 71967).
REF
Mortar mixer paddle MR-80 65927 6 9-15 Lb 4-7 kg
15 3/4”400 mm
3 5/32”80 mm
Mortar mixer paddle MR-100 65928 6 15-33 Lb 7-15 kg
21 21/32”550 mm
3 15/16”100 mm
MORTAR MIXER ROUND PADDLE - HEXAGONAL ROD
• Special mixing between 2.2 - 4.4 Lb. (1 - 2 kg.) of epoxy resins.• 8 mm. hexagonal finish.• Adaptable to RUBIMIX-9/9 PLUS by chuck (Ref. 71967).
REF
Epoxy mixer paddle E-80 65939 6 2-4 Lb 1-2 kg
15 3/4”400 mm
3 5/32”80 mm
EPOXY MIXER PADDLE E-80
103
• For mixing between 4.4 - 11 Lb. (2 - 5 kg.) of epoxy resins. Double helix, higher performance.
• 8 mm. hexagonal finish.• Adaptable to RUBIMIX-9/9 PLUS by chuck (Ref. 71967).
REFEpoxy mixer paddle E-80-2H Double helix 71956 6 4-11 Lb
2-5 kg15 3/4”
400 mm3 5/32”
80 mm
EPOXY MIXER PADDLE E-80-2H
• To mix all materials.• 10 mm. hexagonal finish.• Adaptable to RUBIMIX-9/9 PLUS by chuck (Ref. 71967).
REF
Standard mixer paddle ML-100 65931 6 22-33 Lb 10-15 kg
21 21/32”550 mm
3 15/16”100 mm
Standard mixer paddle ML-100-L 73921 6 22-33 Lb 10-15 kg
29 29/32”760 mm
3 15/16”100 mm
STANDARD MIXER PADDLE - HEXAGONAL ROD
• For mixing between 2.2 - 11 Lb. (1 - 5 kg.) of paint.• 6 mm. round rod.• Adaptable to RUBIMIX-9/9 PLUS by chuck (Ref. 71967).
REF
Liquid mixer paddle L-60 65932 6 2-11 Lb 1-5 kg
13 25/32”350 mm
2 3/8”60 mm
LIQUID MIXER PADDLE L-60
• To mix liquid and low density materials.• Adaptable to RUBIMIX-9/9 PLUS by chuck (Ref. 71967).
REF
Liquid mixer paddle L-80 65933 6 11-33 Lb 5-15 kg
15 3/4”400 mm
3 5/32”80 mm
Liquid mixer paddle L-100 65934 6 33-55 Lb 15-25 kg
21 21/32”550 mm
3 15/16”100 mm
LIQUID MIXER PADDLE - HEXAGONAL ROD
• To mix liquid and low density materials.• M14x2 thread connection.• Adaptable directly RUBIMIX-9/9 PLUS.
REF
Liquid mixer paddle L-100-R 72938 6 33-55 Lb 15-25 kg
21 21/32”550 mm
3 15/16”100 mm
Liquid mixer paddle L-120-R 73910 2 33-88 Lb 15-40 kg
23 5/8”600 mm
4 23/32”120 mm
LIQUID MIXER PADDLE - THREAD M14
104
• To mix up to 66.1 - 110.2 Lb. (30 - 50 kg.) of glue mortar. M27 x 1,5 thread finish.• Fits directly to RUBIMIX-9-BL DUPLEX.
Mortar mixer paddle M-120 DUPLEX set 2 66-110 Lb 30-50 kg
22 7/16”570 mm
4 23/32”120 mm
MORTAR MIXER PADDLE M-120 DUPLEX
• For mixing between 33.1 - 66.1 Lb. (15 - 25 kg.) of plaster.• M14 x 2 thread connection.• Adaptable directly RUBIMIX-9/9 PLUS and other brands.
REF
Plaster mixer paddle P-120-R 72954 2 33-66 Lb 15-30 kg
23 7/32”590 mm
4 11/32”110 mm
PLASTER MIXER PADDLE P-120-R
• Head to adapt M14 x 2 thread to 1/2” (12 mm.) hexagonal rod.• Supplied in blister
REF
Adapter head for mixer paddle 71966 5
ADAPTER HEAD
• Rubber Bucket 65 l. Spare RUBIMIX-50-N and also for use with RUBIMIX-9/9 PLUS and 9 DUPLEX.
• Rubber Bucket 40 l. Spare RUBIMIX-25-N and also for use with RUBIMIX-9/9 PLUS and 9 DUPLEX.
REF
Bucket for RUBIMIX-50-N 60202 1
Bucket for RUBIMIX-25-N 60265 1
RUBIMIX BUCKETS
• Chuck attachable to RUBIMIX-9 and 9 PLUS to work with hexagonal and round finishing rods below 12mm.
• Includes chuck key - S2 Ref. 71969.
REF
Chuck 71967 1
Chuck key 71969 1
CHUCK
MIXER TABLE
MOD. REF
kg / Lb RPM W mm / inch Ø mm / inch Ø mm / inch
MIX
ER
S
Tile adhesive
Quantity to be mixed
Material to be mixed
Recommen-ded speed (RPM)
Minimum drill power (W)
Rod shape Ø of mixerTotal length
Paint / Liquids Epoxi resin Gypsum
UPWARDS MO-TION: The material rises through the inner section of the mixing paddle and falls on the outside. This motion allows for an homogeneous mixture of viscous materials such as mortar, cement, glue, etc. Less effort and easier use.
PARALLEL MOTION: The mixture is done horizontally so the materials flow in both directions (up/down) depending on the move-ment of the paddle. This motion is recommended for resines, bicompo-nents, liquids, etc. It reduces the aumount of bubbles and lumps.
DOWNWARD MOTION: The material is pulled through the paddle’s head and rises through the exterior. This motion is recom-mended for materials with a low viscosity such as paint, sealers, plaster, etc...The lumps are dissolved without splashing.
COUNTER MOTION: Both paddles work simultaneously generating a more intense mixture. Recommended for resilient and viscous materials such as mortars. Only for dual- paddle mixers.
Round finish
Hexagonal finish
Thread finish
65929 200-500 500M-80 10-15 kg 22-33,1 Lb
400 mm 153/4”
80 mm 33/16”
8 mm 5/16”
200-500 50065931ML-100 10 mm 5/16”
100 mm 4”
550 mm 2111/16”
10-15 kg 22-33,1 Lb
200-500 50073921ML-100-L 10 mm 5/16”
100 mm 4”
760 mm 2915/16”
10-15 kg 22-33,1 Lb
200-500 70065930M-100 10 mm 13/32”
100 mm 4”
400 mm 153/4”
15-20 kg 33,1-44,1 Lb
200-500 70073922M-100-L 10 mm 13/32”
100 mm 4”
760 mm 2915/16”
15-20 kg 33,1-44,1 Lb
200-500 700 M14x272934M-100-R 100 mm 4”
400 mm 153/4”
15-20 kg 33,1-44,1 Lb
M14x2200-500 95072935M-120-R 120 mm 43/4”
550 mm 2111/16”
15-25 kg 33,1-55,1 Lb
200-500 50065934L-100 10 mm 5/16”
100 mm 4”
550 mm 2111/16”
15-25 kg 33,1-55,1 Lb
M14x2200-500 50073938L-100-R 100 mm 4”
550 mm 2111/16”
15-25 kg 33,1-55,1 Lb
M14x2200-500 95072954P-120-R 110 mm 411/32”
590 mm 231/4”
15-30 kg 33,1-66,1 Lb
M14x2200-500 95073910L-120-R 120 mm 43/4”
600 mm 2111/16”
15-40 kg 33,1-88,2 Lb
M14x2200-500 130072936M-140-R 140 mm 59/16”
550 mm 2111/16”
25-40 kg 55,1-88,2 Lb
M14x2200-500 150072937M-160-R 160 mm 65/16”
600 mm 2111/16”
30-60 kg 66,1-132,3 Lb
200-500 40065927MR-80 8 mm 5/16”
80 mm 33/16”
400 mm153/4”
4-7 kg 8,8-15,4 Lb
200-500 50065928MR-100 10 mm 13/32”
100 mm 4”
550 mm 2111/16”
7-15 kg 15,4-33,1 Lb
M27x1,5480 135025946M-120DUPLEX
120 mm 43/4”
570 mm 187/16”
30-50 kg 66,1-110,2 Lb
300-500 70065939E-80 8 mm 5/16”
80 mm 33/16”
400 mm153/4”
1-2 kg 2,2-4,4 Lb
300-500 70071956E-80-2H 8 mm 5/16”
80 mm 33/16”
400 mm153/4”
2-5 kg 4,4-11 Lb
500-1000 30065932L-60 6 mm 11/32”
60 mm 23/8”
350 mm 1313/16”
1-5 kg 2,2-11 Lb
500-1000 40065933L-80 8 mm 5/16”
80 mm 33/16”
400 mm153/4”
5-15 kg 11-33,1 Lb
105
TOOLS FOR
LAYING TILES AND
FINISHINGS
TROWELS, NOTCHED TROWELS, BRICK TROWELS, FLOATS, RUBBER TROWELS AND SPATULAS.
MARKERS, CHISELS, TEMPLATES AND ACCESSORIES FOR TILING
MALLETS, NIPPERS AND ELECTRIC JOINT APPLICATORS FOR MORTAR
108
TROWELS & NOTCHED TROWELS CLOSED WOOD HANDLE• Steel plate special high wear resistance with corrosion protection by clear coat. (STEEL).• Stainless steel plate special high wear resistance (INOX).
REF
STEEL trowel 12” (30 cm.) 65950 6 624
INOX trowel 12” (30 cm.) 65960 6 624
Sharp edged INOX trowel 12” (30 cm.) 74948 6 624
STEEL notched trowel 11” (28 cm.) 1/8 x 1/8”(3 x 3 mm.) 65989 6 624 1/8”3 mm
1/8”3 mm
STEEL notched trowel 11” (28 cm.) 3/16” x 3/16” (4.5 x 4.5 mm.) 74945 6 624 5/32”4.5 mm
5/32”4.5 mm
STEEL notched trowel 11” (28 cm.) 1/4 x 1/4” (6 x 6 mm.) 65982 6 624 1/4”6 mm
1/4”6 mm
STEEL notched trowel 11” (28 cm.) 3/8 x 3/8” (8 x 8 mm.) 65984 6 624 5/16”8 mm
5/16”8 mm
INOX notched trowel 11” (28 cm.) 3/8” x 3/8” (8 x 8 mm.) 74904 6 624 5/16”8 mm
5/16”8 mm
STEEL notched trowel 11” (28 cm.) 13/32 x 13/32” (10 x 10 mm.) 65985 6 624 13/32”10 mm
13/32”10 mm
INOX notched trowel 11” (28 cm.) 13/32” x 13/32” (10 x 10 mm.) 74905 6 624 13/32”10 mm
13/32”10 mm
STEEL notched trowel 11” (28 cm.) 1/2” x 1/2” (12 x 12 mm.) 74947 6 624 15/32”12 mm
15/32”12 mm
INOX notched trowel 11” (28 cm.) 1/2” x 1/2” (12 x 12 mm.) 74906 6 624 15/32”12 mm
15/32”12 mm
STEEL notched trowel 11” (28 cm.) R-13/32” (10 mm.) 65986 6 624 13/32”10 mm
Triangular STEEL notched trowel 11” (28 cm.) 1/4 x 7/32” (6 x 5 mm.) 70906 6 624 1/4”6 mm
3/16”5 mm
109
19”(48CM) TROWELS & NOTCHED T. CLOSED WOOD HDLE.• Steel plate special high wear resistance, corrosion-protected by clear coat (STEEL).• Stainless steel plate special high wear resistance (INOX)• Perfect flatness of the plate.• The notches 13/16” x 13/16” (20 x 20 mm.) developed for dosing of glue mortar on uneven floors. Allows more material thickness.
REF
STEEL trowel 19” (48 cm.) 65988 6 312
INOX trowel 19” (48 cm.) 72915 6 312
STEEL trowel 19” (48 cm.) 1/4” x 1/4” (6 x 6 mm.) 65958 6 312 1/4”6 mm
1/4”6 mm
STEEL trowel 19” (48 cm.) 3/8” x 3/8” (8 x 8 mm.) 65959 6 312 5/16”8 mm
5/16”8 mm
STEEL trowel 19” (48 cm.) 13/32” x 13/32” (10 x 10 mm.) 65983 6 312 13/32”10 mm
13/32”10 mm
STEEL trowel 19” (48 cm.) 1/2” x 1/2” (12 x 12 mm.) 73973 6 312 15/32”12 mm
15/32”12 mm
STEEL trowel 19” (48 cm.) 13/16” x 13/16” (20 x 20 mm.) 75962 6 312 25/32”20 mm
25/32”20 mm
STEEL trowel 19” (48 cm.) R-13/32” (10 mm.) 65987 6 312 13/32”10 mm
110
TROWELS & NOTCHED TROWELS OPEN WOOD HANDLE• Extremely light, high resistance aluminium reinforcement.• Highly rigid join between the reinforcement and the plate.• Steel plate special high wear resistance with corrosion protection by clear coat. (STEEL).• Stainless steel plate special high wear resistance (INOX).• Perfect flatness of the plate.
REF
STEEL trowel 11” (28 cm.) 72916 6 480
INOX trowel 11” (28 cm.) 72918 6 480
INOX notched trowel 11” (28 cm.) 1/8” x 1/8” (3 x 3 mm.) 74909 6 480 1/8”3 mm
1/8”3 mm
INOX notched trowel 11” (28 cm.) 3/16” x 3/16” (4.5 x 4.5 mm.) 74910 6 480 5/32”4.5 mm
5/32”4.5 mm
INOX notched trowel 11” (28 cm.) 1/4” x 1/4” (6 x 6 mm.) 74911 6 480 1/4”6 mm
1/4”6 mm
INOX notched trowel 11” (28 cm.) 3/8” x 3/8” (8 x 8 mm.) 74913 6 480 5/16”8 mm
5/16”8 mm
STEEL notched trowel 11” (28 cm.) 13/32” x 13/32” (10 x 10 mm.) 74914 6 480 13/32”10 mm
13/32”10 mm
INOX notched trowel 11” (28 cm.) 1/2” x 1/2” (12 x 12 mm.) 74915 6 480 15/32”12 mm
15/32”12 mm
INOX notched trowel 11” (28 cm.) R-13/32” (10 mm.) 74916 6 480 13/32”10 mm
111
SPATULAS & NOTCHED SPATULAS WOOD HANDLE• 7”(18 cm) wide plate.Special steel high wear resistance.
REF
STEEL spatula 7” (18 cm.) 71922 12 3456
STEEL notched spatula 7” (18 cm.) 1/8”x1/8”(3x3 mm.) 71923 12 3456 1/8”3 mm
1/8”3 mm
STEEL notched spatula 7” (18 cm.) 1/4”x1/4” (6x6 mm.) 71924 12 3456 1/4”6 mm
1/4”6 mm
STEEL notched spatula 7” (18 cm.) 1/3”x1/3”(8x8 mm.) 71925 12 3456 5/16”8 mm
5/16”8 mm
STEEL notched spatula 7” (18 cm.) 2/3”x2/3”(10x10 mm.) 71926 12 3456 13/32”10 mm
13/32”10 mm
STEEL notched spatula 7” (18 cm.) Trian.1/8”x1/8”(3x3 mm.) 71927 12 3456 1/8”3 mm
1/8”3 mm
STEEL notched spatula 7” (18 cm.) Trian.1/4”x1/4”(6x6 mm.) 71928 12 3456 1/4”6 mm
1/4”6 mm
LEVELLING TROWELS• Levelling trowels wood handle• Special high wear resistant steel plate.• Plate measures:15 3/4”x4 11/32”(40 x 11 cm.)
REF
Levelling trowel round tip 60996 3 320
Levelling trowel pointed tip 60997 3 320
112
TROWELS & NOTCHED TROW. CLOSED RUBIFLEX HANDLE• Steel plate special high wear resistance with corrosion protection by clear coat.(STEEL)• Stainless steel plate high wear resistance. (INOX)• Ergonomic RUBIFLEX handle with two textures.• Perfect flatness of the plate.
REF
STEEL trowel-12” (30 cm.) 75950 6 624
INOX trowel 12” (30 cm.) 75970 6 624
STEEL notched trowel 11” (28cm) 1/8”x1/8” (3x3 mm.) 75953 6 624 1/8”3 mm
1/8”3 mm
STEEL notched trowel 11” (28 cm.) 1/4”x1/4” (6x6 mm.) 75955 6 624 1/4”6 mm
1/4”6 mm
STEEL notched trowel 11” (28cm) 3/8”x3/8” (8x8 mm.) 75957 6 624 5/16”8 mm
5/16”8 mm
STEEL notched trowel 11” (28cm) 1/2”x1/2” (10x10 mm.) 75958 6 624 13/32”10 mm
13/32”10 mm
STEEL notched trowel 11” ( 28 cm.) 1/2”x1/2” (12x12 mm.) 75959 6 624 15/32”12 mm
15/32”12 mm
STEEL notched trowel 11” (28cm) R-13/32” (10 mm.) 75960 6 624 13/32”10 mm
113
TROWELS & NOTCHED TROWELS OPEN RUBIFLEX HANDLE• Steel plate special high wear resistance with corrosion protection by clear coat.(STEEL)• Ergonomic RUBIFLEX handle with two textures.• Perfect flatness of the plate.
REF
STEEL trowel 11” (28 cm.) 72917 6 480
INOX trowel 11” (28 cm.) 72919 6 480
STEEL notched trowel 11” (28 cm.) 1/8”x1/8” (3x3 mm.) 72906 6 480 1/8”3 mm
1/8”3 mm
INOX notched trowel 11” (28 cm.) 1/8”x1/8” (3x3 mm.) 74936 6 480 1/8”3 mm
1/8”3 mm
STEEL notched trowel 11” (28 cm.) 3/16”x3/16” (4.5x4.5 mm.) 74980 6 480 5/32”4.5 mm
5/32”4.5 mm
INOX notched trowel 11” (28 cm.) 3/16”x3/16” (4.5x4.5 mm.) 74937 6 480 5/32”4.5 mm
5/32”4.5 mm
STEEL notched trowel 11” (28 cm.) 1/4”x1/4” (6x6 mm.) 72907 6 480 1/4”6 mm
1/4”6 mm
INOX notched trowel 11” (28 cm.) 1/4”x1/4” (6x6 mm.) 74938 6 480 1/4”6 mm
1/4”6 mm
STEEL notched trowel 11” (28 cm.) 3/8”x3/8” (8x8 mm.) 72908 6 480 5/16”8 mm
5/16”8 mm
INOX notched trowel 11” (28 cm.) 3/8”x3/8” (8x8 mm.) 74940 6 480 5/16”8 mm
5/16”8 mm
STEEL notched trowel 11” (28 cm.) 13/32”x13/32” (10x10 mm.) 72909 6 480 13/32”10 mm
13/32”10 mm
INOX notched trowel 11” (28 cm.) 13/32”x13/32” (10x10 mm.) 74941 6 480 13/32”10 mm
13/32”10 mm
STEEL notched trowel 11” (28 cm.) 1/2”x1/2” (12x12 mm.) 74982 6 480 15/32”12 mm
15/32”12 mm
INOX notched trowel 11” (28 cm.) 1/2”x1/2” (12x12 mm.) 74942 6 480 15/32”12 mm
15/32”12 mm
STEEL notched trowel 11” (28 cm.) R-13/32” (10 mm.) 72910 6 480 13/32”10 mm
INOX notched trowel 11” (28 cm.) R-1/2” (10 mm.) 74943 6 480 13/32”10 mm
STEEL notched trowel triangular 11” (28 cm.) 1/4”x7/32” (6x5 mm.) 72911 6 480 1/4”6 mm
3/16”5 mm
114
• 45º Angled notches for confort and less user effort.• Improves adherence of the mortar on to work surface.• Special carbon steal alloy plate of high wear resistance.• Extremely light,high resistance aluminium reinforcement.• Highly rigid joint betwwen the reinforcement and the plate.• Ergonomic RUBIFLEX handle with two textures.• Clear coat for protection against corrosion.• Perfect flatness of the plate.
REF
45º Notched trowel 11” (28 cm) 1/4”x1/4” (6x6) 75946 6 480 1/4”6 mm
1/4”6 mm
45º Notched trowel 11” (28 cm) 3/8”x3/8” (8x8) 75947 6 480 5/16”8 mm
5/16”8 mm
45º Notched trowel 11” (28 cm) 13/32”x13/32” (10x10) 75948 6 480 13/32”10 mm
13/32”10 mm
45º Notched trowel 11” (28 cm) 1/2”x1/2” (12x12) 75923 6 480 15/32”12 mm
15/32”12 mm
45º Notched trowel 11” (28 cm) R-13/32” (10 mm.) 75924 6 480 13/32”10 mm
45º NOTCHED TROWEL RUBIFLEX OPEN HANDLE
1
24
35
6
1. Extremely light and resistance aluminium reinforcement. 2. Highly rigid fi xation between the reinforcement and the plate. 3. Steel/stainless steel plate with high resistance to abrasion. 4. Ergonomic RUBIFLEX handle with two textures. 5. Corrosion protection with clear varnish. 6. Perfect fl atness of the plate.
115
TROWELS & NOTCHED TROW. CLOSED PLASTIC HANDLE• Steel plate special high wear resistance with corrosion protection by clear coat.
REF
STEEL trowel 12” (30 cm.) 65951 6 624
Notched trowel 11” (28 cm.) 1/8”x1/8” (3x3 mm.) . 65965 6 624 1/8”3 mm
1/8”3 mm
Notched trowel 11” (28 cm.) 1/4”x1/4” (6x6 mm.) 65966 6 624 1/4”6 mm
1/4”6 mm
Notched trowel 11” (28 cm.) 3/8”x3/8” (8x8mm.) 65967 6 624 5/16”8 mm
5/16”8 mm
Notched trowel 11” (28 cm.) 13/32”x13/32” (10x10 mm.) 65968 6 624 13/32”10 mm
13/32”10 mm
Notched trowel 11” (28 cm.) 1/2”x1/2” (12x12 mm.) 74976 6 624 15/32”12 mm
15/32”12 mm
Notched trowel 11” (28 cm.) R- 13/32”(10 mm.) 65969 6 624 13/32”10 mm
TROWELS & NOTCHED TROWELS OPEN PLASTIC HANDLE• Steel plate with high resistance to abrasion
REF
STEEL trowel 12” (30 cm.) 65955 6 480
Notched trowel 11” (28 cm.) 1/8”x1/8”(3x3 mm.) 65999 6 480 1/8”3 mm
1/8”3 mm
Notched trowel 11” (28 cm.) 1/4”x1/4”(6x6 mm.) 65991 6 480 1/4”6 mm
1/4”6 mm
Notched trowel 11” (28 cm.) 3/8”x3/8”(8x8mm) 65992 6 480 5/16”8 mm
5/16”8 mm
Notched trowel 11” (28 cm.) 13/32”x13/32”(10x10 mm.) 65993 6 480 13/32”10 mm
13/32”10 mm
Notched trowel 11” (28 cm.) 1/2”x1/2” (12x12 mm.) 74979 6 480 15/32”12 mm
15/32”12 mm
Notched trowel 11” (28 cm.)R-13/32” (10 mm.) 65994 6 480 13/32”10 mm
116
TROWELS OPEN PLASTIC HANDLE BICOLOUR• Steel plate. Special high wear resistance.• Plate trowel: 12” x 5” (30 x 15 cm.)• Plate notched trowel: 11” x 4” (28 x 12 cm.)
REF
Steel trowel 12” (30 cm.) open plastic handle 25900 6 480
Steel notched trowel 11” (28 cm.) 1/8” x 1/8” (3 X 3 mm.) 25901 6 480 1/8”3 mm
1/8”3 mm
Steel notched trowel 11” (28 cm.) 3/16” x 3/16” (4,5 X 4,5 mm.) 25902 6 480 5/32”4.5 mm
5/32”4.5 mm
Steel notched trowel 11” (28 cm.) 1/4” x 1/4” (6 X 6 mm.) 25903 6 480 1/4”6 mm
1/4”6 mm
Steel notched trowel 11” (28 cm.) (8 X 8 mm.) 25905 6 480 5/16”8 mm
5/16”8 mm
Steel notched trowel 11” (28 cm.) (10 X 10 mm.) 25906 6 480 13/32”10 mm
13/32”10 mm
Steel notched trowel 11” (28 cm.) (12 X 12 mm.) 25907 6 480 15/32”12 mm
15/32”12 mm
SPATULA / NOTCHED SPATULA PLASTIC HANDLE• 7” (18 cm.) wide plate.• Steel plate special high wear resistance.
REF
Steel spatula 7” (18 cm.) 74957 12 3456
Notched spatula 7” (18 cm.) 1/8” x 1/8” (3 x 3 mm.) 74958 12 3456 1/8”3 mm
1/8”3 mm
Notched spatula 7” (18 cm.) 1/4” x 1/4” (6 x 6 mm.) 74959 12 3456 1/4”6 mm
1/4”6 mm
Notched spatula 7” (18 cm.) 3/8” x 3/8” (8 x 8 mm.) 74960 12 3456 5/16”8 mm
5/16”8 mm
Notched spatula 7”(18 cm.) 13/32” x 13/32” (10 x 10 mm.) 74961 12 3456 13/32”10 mm
13/32”10 mm
Triangular notched spatula 7” (18 cm.) 1/4” x 1/4” (6 x 6 mm.) 74963 12 3456 1/4”6 mm
1/4”6 mm
117
TROWELS & NOTCHED TROWELS OPEN WOOD HDLE RECT• Steel plate special high wear resistance.• Plate: 11” x 5” (28 x 12 cm.)
REF
Steel trowel 11” (28 cm.) 75928 6
Steel notched trowel 11” (28 cm.) 1/4” x 1/4” (6 X 6 mm.) 75929 6 1/4”6 mm
1/4”6 mm
Steel notched trowel 11” (28 cm.) 3/8” x 3/8” (8 X 8 mm.) 75930 6 5/16”8 mm
5/16”8 mm
Steel notched trowel 11” (28 cm.) 13/32” x 13/32” (10 X 10 mm.) 75931 6 13/32”10 mm
13/32”10 mm
NOTCHED SPATULAS AND GROUT SPATULA SET• Set of 2 steel notched spatulas 1/4” x 1/4” (6 x 6 mm.) and 3/16” x 3/169” (4 x 4 mm.) Triangular and 7” (21 cm.)grouter spatula
REF
2 notched spatulas and grout spatula set 10665 1
72918
74911
74913
74914
74915
74916
74909
74910
65960
74948
72915 36914
75929
75930
75931
7291665950
65982
65985
74947
65986
70906
65989
74945
SPATULA
ROUND
65988
65958
65959
65983
73973
65987
75962
71922
71924
71925
71926
71927
71928
71923
CLOSED HANDLE CLOSED HANDLE 48cm / 19”
OPEN HANDLE OPEN HANDLE
TROWEL SHARP EDGES SQUARE TRIANGULAR
WOODEN HANDLE
3x3 mm 1/8x1/8 ”
SHARP
4,5x4,5mm 3/16x3/16 ”
6x6 mm 1/4x1/4 ”
8x8 mm 3/8x3/8 ”
10x10 mm 13/32x13/32”
12x12 mm1/2x1/2 ”
20x20 mm 13/16x13/16”
R10
3x3 mm 1/8x1/8 ”
6x5 mm |1/4x7/32 ”
6x6 mm1/4x1/4 ”
TROWELS AND NOTCHED TROWELS
72919
74936
74938
74940
74941
74942
74943
74937
75970
75946
75947
75948
75923
75924
72917
72906
72907
72908
72909
72910
72911
74980
65951
65965
65966
65967
65968
74976
65969
65955
65999
65991
65992
65993
74979
65994
74957
74958
74959
74960
74961
74963
25900
25901
25903
25905
25906
25907
25902
75950
75953
75955
75957
75958
75959
75960
45º
RUBIFLEX HANDLE PLASTIC HANDLE
118
119
BRICK TROWELS•Perfectadaptioninshapes,sizesandspecificcharacteristicstomeetthedemandsofeachmarket.
• Ergonomic RUBIFLEX.
REF
PFP01-120 mm. (4 3/4”) 75012 6 4 23/32”120 mm
2 7/8”73 mm
0.331 Lb 0.150 kg
PFP01-140 mm. (5 17/32”) 75014 6 5 1/2”140 mm
2 15/16”75 mm
0.348 Lb 0.158 kg
PFP01-160 mm. (5 5/16”) 75016 6 6 5/16”160 mm
2 “76 mm
0.384 Lb 0.174 kg
PFP01
• Ergonomic RUBIFLEX.
REF
PFP05-160 mm. (5 5/16”) 75416 6 6 5/16”160 mm
3 17/32”90 mm
0.562 Lb 0.255 kg
PFP05-180 mm. (7 3/32”) 75418 6 7 3/32”180 mm
4 1/8”105 mm
0.628 Lb 0.285 kg
PFP05-200 mm. (7 7/8”) 75420 6 7 7/8”200 mm
4 11/32”110 mm
0.703 Lb 0.319 kg
PFP05
• Varnished beechwood handle.
REF
PFM06-180 mm. (7 3/32”) 35518 6 7 3/32”180 mm
5 1/8”130 mm
0.745 Lb 0.338 kg
PFM06-200 mm. (7 7/8”) 35520 6 7 7/8”200 mm
5 13/32”137 mm
0.794 Lb 0.360 kg
PFM06
• Ergonomic RUBIFLEX
REF
PFP10-130 mm. (5 1/8”) 75913 6 5 1/8”130 mm
2 3/4”70 mm
0.278 Lb 0.126 kg
PFP10-150 mm. (5 29/32”) 75915 6 5 29/32”150 mm
3 5/32”80 mm
0.317 Lb 0.144 kg
PFP10
• Ergonomic RUBIFLEX
REF
PFP19- 80 mm. (4 5/16”) 76808 6 4 9/32”109 mm
3 5/32”80 mm
0.335 Lb 0.152 kg
PFP19- 90 mm. (5 1/16”) 76809 6 5 1/32”128 mm
3 17/32”90 mm
0.37 Lb 0.168 kg
PFP19
• Varnished beechwood handle.
REF
PFM20-140 mm. (5 17/32”) 36914 6 5 1/2”140 mm
2 7/16”62 mm
0.269 Lb 0.122 kg
PFM20-160 mm. (6 5/16”) 36916 6 6 5/16”160 mm
2 3/4”70 mm
0.295 Lb 0.134 kg
PFM20
120
BRICK TROWELS•Perfectadaptioninshapes,sizesandspecificcharacteristicstomeetthedemandsofeachmarket.
• Varnished beechwood handle.
REF
PFM22-150 mm. (5 29/32”) 37115 6 5 29/32”150 mm
4 1/2”114 mm
0.734 Lb 0.333 kg
PFM22-165 mm. (6 1/2”) 37116 6 6 5/8”168 mm
4 11/16”119 mm
0.791 Lb 0.359 kg
PFM22-180 mm. (7 3/32”) 37118 6 7 1/4”184 mm
4 7/8”124 mm
0.816 Lb 0.370 kg
PFM22
• Ergonomic RUBIFLEX handle
REF
PFP22-150 mm. (5.29/32”) 77115 6 5 29/32”150 mm
4 1/2”114 mm
0.75 Lb 0.340 kg
PFP22-165 mm. (6.17/32”) 77116 6 6 5/8”168 mm
4 11/16”119 mm
0.807 Lb 0.366 kg
PFP22-180 mm. (7.3/32”) 77118 6 7 1/4”184 mm
4 7/8”124 mm
0.981 Lb 0.445 kg
PFP22
• Varnished beechwood handle.
REF
PFM23-180A mm. (7 3/32”) 37258 6 7 7/32”183 mm
4 19/32”117 mm
0.78 Lb 0.354 kg
PFM23-185B mm. (7 3/32”) 37268 6 7 1/8”181 mm
5 5/32”131 mm
0.844 Lb 0.383 kg
PFM23-190C mm. (7 3/32”) 37279 6 7 15/32”190 mm
4 21/32”118 mm
0.838 Lb 0.380 kg
PFM23
• Ergonomic RUBIFLEX handle
REF
PFP23-180 A mm. (7.3/32”) 77258 6 7 7/32”183 mm
4 19/32”117 mm
0.796 Lb 0.361 kg
PFP23-185 B mm. (7.3/32”) 77268 6 7 1/8”181 mm
5 5/32”131 mm
0.86 Lb 0.390 kg
PFP23-190 C mm. (7.3/32”) 77279 6 7 15/32”190 mm
4 21/32”118 mm
0.853 Lb 0.387 kg
PFP23
• Varnished beechwood handle.
REF
PFM24-140 mm. (5 17/32”) 37314 6 5 1/2”140 mm
3 7/32”82 mm
0.322 Lb 0.146 kg
PFM24-160 mm. (6 5/16”) 37316 6 6 5/16”160 mm
3 5/8”92 mm
0.335 Lb 0.152 kg
PFM24-180 mm. (7 3/32”) 37318 6 7 3/32”180 mm
4 1/16”103 mm
0.564 Lb 0.256 kg
PFM24-200 mm. (7 7/8”) 37320 6 7 7/8”200 mm
4 11/32”110 mm
0.586 Lb 0.266 kg
PFM24-220 mm. (8 11/16”) 37322 6 8 21/32”220 mm
4 11/16”119 mm
0.648 Lb 0.294 kg
PFM24
121
BRICK TROWELS•Perfectadaptioninshapes,sizesandspecificcharacteristicstomeetthedemandsofeachmarket.
• Ergonomic RUBIFLEX handle
REF
PFP24-140 mm. (5 17/32”) 77314 6 5 1/2”140 mm
3 7/32”82 mm
0.34 Lb 0.154 kg
PFP24-160 mm. (6 5/16”) 77316 6 6 5/16”160 mm
3 5/8”92 mm
0.337 Lb 0.153 kg
PFP24-180 mm. (7 3/32”) 77318 6 7 3/32”180 mm
4 1/16”103 mm
0.58 Lb 0.263 kg
PFP24-200 mm. (7 7/8”) 77320 6 7 7/8”200 mm
4 11/32”110 mm
0.606 Lb 0.275 kg
PFP24-220 mm. (8 11/16”) 77322 6 8 21/32”220 mm
4 11/16”119 mm
0.664 Lb 0.301 kg
PFP24
• Varnished beechwood handle.
REF
PFM25-180 mm. (7 3/32”) 37418 6 8 21/32”220 mm
4 11/16”119 mm
0.664 Lb 0.301 kg
PFM25
• Ergonomic RUBIFLEX handle
REF
PFP25-180 mm. (7.3/32”) 77418 6 7 3/32”180 mm
4 11/32”110 mm
0.668 Lb 0.303 kg
PFP25
• Varnished beechwood handle.
REF
PFM26-200 mm. (7 7/8”) 37520 6 7 7/8”200 mm
5 3/16”132 mm
0.816 Lb 0.370 kg
PFM26
• Ergonomic RUBIFLEX handle
REF
PFP33-170x50 mm. (6 3/4” x 2”) 79050 6 6 11/16”170 mm
1 31/32”50 mm
0.34 Lb 0.154 kg
PFP33
• Stainless steel plate. For interior angles
REFPFM53- 110x75 mm. (4 1/3” x 2 31/32”) 38211 6 4 11/32”
110 mm2 15/16”
75 mm0.496 Lb 0.225 kg
PFM53
122
BRICK TROWELS•Perfectadaptioninshapes,sizesandspecificcharacteristicstomeetthedemandsofeachmarket.
• Stainless steel plate. Ergonomic RUBIFLEX handle.
REFPFP53-110x75 mm. (4 1/3” x 2 31/32”) 78211 6 4 11/32”
110 mm2 15/16”
75 mm0.516 Lb 0.234 kg
PFP53
• Stainless steel plate.
REFPFM54- 110x75 mm. (4 1/3” x 2 31/32”) 38311 6 4 11/32”
110 mm2 15/16”
75 mm0.496 Lb 0.225 kg
PFM54
• Special for tile installers, sharp arrow.
REF
PFM55-145 mm. (5 3/4”) 38414 6 5 23/32”145 mm
3 15/16”100 mm
0.54 Lb 0.245 kg
PFM55-165 mm. (6 1/2”) 38416 6 6 1/2”165 mm
4 1/2”114 mm
0.617 Lb 0.280 kg
PFM55
1.
2.
3.4.
5.
10.
11.
7.
6.
8.
9. 1. Special white nylon lap for tapping without staining. 2. Wooden handle in varnished beech. 3. Nickel-plated notched ring to increase handle fi xation. 4. Solid, non-detachable mounting between handle and pin. 5. Fusion technique to forging temperature. Fully guaranteed for life
against breakage. 6. Perfect fl atness of the entire plate. 7. Plate protected against corrosion. 8. Fibres oriented lengthwise during plating.
• Specifi c thermal treatment on:
- Plate, to improve fl exibility and prevent wear-off.
- Pin, to improve hardness and rigidness. 9. Maximum lightness retaining its resistance. 10. Total regularity of all fabrications. 11. Perfect adaptation of shapes, sizes and specifi c characteristics
of each market demands.
BRICK TROWELS TECHNICAL FEATURES
mm.
inch
80
35/32”
90
39/16”
110
411/32”
120
43/4”
130
51/8”
140
517/32”
160
65/16”
165
61/2”
170
623/32”
185
75/16”
190
71/2”
200
77/8”
220
811/16”
180
7”
150
524/32”
PFM20 36914
PFM22 37115 37116 37118
PFM25 37418
PFM26 37520
PFM53 38211
PFM54 38311
PFP19 76808 76809
PFP22 77115 77116 77118
PFP25 77418
PFP24 77318 77320 7732277314
PFP33
PFP53 78211
PFP23 77258 77268 77279
PFP10 75913
PFP01 75012 75014
PFP05 75418
PFM55 38414 38416
PFM24 3731837314 37320 37322
PFM23 37258 37268 37279
PFM06 35518 35520
RUBI® BRICK TROWELS RANGE
77316
75016
75416
37316
36916
75420
75913
79050
123
124
• For plastering walls.• Its density and hardness permits a ever finish.
REF
Point tip porex trowel 9 1/2” x 5” (24 x 14 cm.) 83993 10
Rectangular porex trowel 9 1/2” x 5” (24 x 14 cm.) 83992 10
POREX FLOATS
• For plastering walls.• Rough finish.
REF
Pointtipfloat10”x7”(27x18cm.) 65949 10
Rectangularfloat10”x7”(27x18cm.) 65947 10
Rectangularfloat13”x9”(34x23cm.) 65948 10
ROUGH WOODEN HANDLE FLOATS
• Reinforced plate of high resistance to abrasion and long durability.• Perfectly flat base
REF
Pointtipfloat10x5”(27x14cm.) 71941 10
Rectangularfloat10”x5”(27x14cm.) 71942 10
Rectangularfloat10”x7”(27x18cm.) 71943 10
Rectangularfloat13”x9”(34x23cm.) 71944 10
Rectangularfloat14”x7”(36x19cm.) 71945 10
ROUGH PLASTIC HANDLE FLOATS
• Reinforced plate of high resistance to abrasion and long durability.• Perfectly flat base.
REF
Pointtipfloat10”x5”(27x14cm.) 71946 10
Rectangularfloat10”x5”(27x14cm.) 71947 10
Rectangularfloat10”x7”(27x18cm.) 71948 10
Rectangularfloat13”x9”(34x23cm.) 71949 10
Rectangularfloat14”x7”(36x19cm.) 71950 10
SMOOTH PLASTIC HANDLE FLOATS
125
• Base and handle of a single piece of high strength.• Ergonomic handle.• Perfectly flat base, 19/32” (15 mm.) thick, high resistance to abrasion.• Material with inner foam very light.
REF
PointtipPOLYURETHANEfloat10”x5”(27x14cm.) 83970 10
RectangularPOLYURETHANEfloat10”x5”(27x14cm.) 83971 10
RectangularPOLYURETHANEfloat10”x7”(27x18cm.) 83972 10
ROUGH POLYURETHANE FLOATS
• For grouting ceramic, wood ergonomic handle.• Available in different hardnesses of rubber for best finish as the joint width. • Rubber float trowel, with white rubber sheet wear resistant. • Solid rubber float, with hard rubber abrasion resistant. Termoflex float, medium
hardness.
REF
RubbergroutfloatSUPERPRO 65970 6
SolidrubbergroutfloatSUPERPRO 65975 6
TermoflexrubbergroutfloatSUPERPRO 65976 6
GROUT FLOATS SUPERPRO WOOD
• For grouting ceramic, plastic ergonomic handle.• Available in different hardnesses of rubber for best finish as the joint width. • Rubber float trowel, with white rubber sheet wear resistant. • Solid rubber float, with hard rubber abrasion resistant. Termoflex float, medium
hardness.
REF
RubbergroutfloatSUPERPRO 65971 6
SolidrubbergroutfloatSUPERPRO 65972 6
TermoflexrubbergroutfloatSUPERPRO 65973 6
RUBBER FLOATS SUPERPRO PLASTIC
• Black foam rubber• Grout Float PRO 9”x4” (22.5x10cm.), with white rubber sheet wear resistant.
REF
Rubbergroutfloat9”x4”x19/32”(22,5x10x1,5cm) 10607 6
GroutfloatPRO91/2”x43/4”x13/32”(24x12x1cm) 24968 10
GroutfloatPRO11”x5”x13/32”(28x14x1cm) 24969 10
GROUT FLOATS PRO
126
• Flexible polyethylene and nonstick base
REF
Flexibleplastichandlefloat12”x5”(30x14mm.) 71904 6
Flexiblewoodenhandlefloat12”x5”(30x14mm.) 71903 6
FLEXIBLE PLASTER FLOATS
• White polystyrene float base with reinforcement and double plastic handle.
REF
Plasterfloat20x9”(50x23cm.) 74986 2
Plasterfloat24x9”(60x23cm.) 74988 2
DOUBLE HANDLED PLASTER FLOATS
• Long life stainless steel and high wear resistance (INOX).• Double plastic handle.
REF
Inox trowel 19” (48cm.) 74983 6 312
Inox trowel sharp-edged trowel 19” (48cm.) 74984 6 312
DOUBLE HANDLED TROWELS
• For filling joints.
REF
Wall tile grout spatula 7” (18 cm.) 65954 1
Wall tile grout spatula 13” (35 cm.) 65935 1
WALL TILE GROUT SPATULA
• Reinforced spatula for professional jobs. Replaceable strip that can be used on both sides.
• Includes grip and aluminium holder.
REF
Floor tile grout spatula 20” (50 cm.) 70971 1
Floor tile grout spatula 24” (60 cm.) 70905 1
Floor tile grout spatula 30” (75 cm.) 70903 1
FLOOR TILE GROUT SPATULA
127
• Adaptable to WOODEN HOLDER ( Ref. 65450 ) Not included
REF
General purpose spatula 17” (44 cm.) 65919 1
General purpose spatula 24” (60 cm.) 70902 1
GENERAL PURPOSE SPATULA
• Adaptable to floor tile grout spatula 50, 60 and 75 cm
REF
Aluminium handle 70904 1
ALUMINIUM HOLDER
• Holder for general purpose spatula of 44 cm. Ref. 65919 and 60cm. Ref. 70902
REF
Wood handle 65450 1
WOODEN HOLDER
• Spatula for small jobs. For better joints finishing.
REF
Joint spatula 1/4” (6 mm.) 65936 1
Joint spatula 3/8” (8 mm.) 65937 1
Joint spatula 13/32” (10 mm.) 65938 1
JOINT SPATULA
• Elastomer template with different curves and angles for outlining joints in silicone, polyrethane, plaster, grout etc.
REF
Outliner for joints 72963 5
OUTLINER FOR JOINTS
128
STAINLESS STEEL PAINT SPATULA WOODEN HANDLE• Stainless steel plate with wooden handle.
REF
Stainless steel paint spatula 1” (25 mm.) 70909 10
Stainless steel paint spatula 1.5/8” (40 mm.) 70910 10
Stainless steel paint spatula 2” 1/2 (63 mm.) 70914 10
Stainless steel paint spatula 3” (75 mm.) 70911 10
Stainless steel paint spatula 4” (100 mm.) 70912 10
Stainless steel paint spatula 6” (150 mm.) 70913 10
STAINLESS STEEL PAINT SPATULA RUBIFLEX HANDLE• Stainless steel plate with ergonomic RUBIFLEX handle.
REF
Stainless steel paint spatula 1” (25 mm.) 73908 10
Stainless steel paint spatula 1” 5/8 (40 mm.) 73909 10
Stainless steel paint spatula 2” 1/2 (63 mm.) 73914 10
Stainless steel paint spatula 3” (75 mm.) 73911 10
Stainless steel paint spatula 4” (100 mm.) 73912 10
Stainless steel paint spatula 6” (150 mm.) 73913 10
129
• Facade mortar scraper with wooden handle.• Plate dimensions: 6x2 7/8” (150x72mm).
REF
Wooden handle scraper 6x2” 7/8 (150x72 mm.) 65963 6
FACADE MORTER SCRAPER 16” X 2 7/8” (50X72MM)
• Facademortar scraper with two types of handles:• Wood and plastic.• plate dimensions 10” x 5 3/4” (250x144mm.)
REF
Plastic handle scraper 10” x 5 3/4” (250x144 mm.) 65962 6
Wooden handle scraper 10” x 5 3/4” (250x144 mm.) 72960 6
Spare scraper 10” x 5 3/4” (250x144 mm.) 65957 6
FACADE MORTAR SCRAPER 10” X 5 3/4” (250X144MM)
• Scraper with wooden handle and plastic base with 8 sheets.• Dimensions: 18 1/2” x 2 3/4” (470 x 70 mm).
REF
Plastic plaster scraper 72962 2 2 Lb 1 kg
PLASTIC PLASTER SCRAPER
• Completely manufactured with aluminium, with 8 sheets.• Dimensions 18” x 3 13/32” (455 x 86 mm.).
REF
Aluminium plaster scraper 72961 1 2 Lb 0.9 kg
ALUMINIUM PLASTER SCRAPER
• Ergonomic handle with two electroplated tungsten carbide plates with high resistance to abrasion.
• Useable with 1, 2 or 3 plates depending on width of the joint.• Supplied in blister.
REF
Joint scraper 65907 1
Spare joint scraper 71974 10
JOINT SCRAPER
130
• For easy adjustment and levelling of the rule for wall tiling.• In box of 2 units.
REF
Rule support set 12” (30 cm.) 60991 1
Rule support set 20” (50 cm.) 60998 1
RULE SUPPORT SET
• Holde firmly the rulers on the walls, allowing a confortable placement of tiles.
REF
Rule holder nail 8” (200 mm.) 72940 6
Rule holder nail 10” (250 mm.) 72941 6
Rule holder nail 12” (300 mm.) 72942 6
RULE HOLDER NAILS
• Placed on the rule permits a perfect diagonal tile laying.• Blister pack of 4 units.
REF
Diagonal tile laying template 60995 6
TEMPLATE FOR DIAGONAL TILE LAYING
• Foldable diagonal marker.• Quick and easy system for marking angular cuts.• Maximum lenght 18” (45cm).
REF
Minianglefinder 70942 1
MINI ANGLE FINDER SQUARE
• For marking the position of holes for tubing and electrical fitting, from the wall to the tile, for subsequent cutting or drilling.
• Maximum lenght 18” ( 45cm ).
REF
Hole marker 70940 6
HOLE MARKER
131
• Copies de shape of the areas which are awkward to mark onto tiles, for subsequent cutting.
REF
Shape template 70925 1
SHAPE TEMPLATE
• New improved composition writes over glass, ceramic tiles, stones, metal and any other surface.
REF
Blue crayon 80936 12
Red crayon 80937 12
CRAYONS
• Specially designed for writing on wet or glazed surfaces like ceramic tile, marble, granite, etc.
• Set of 2 construction pencils supplied in blister.
REF
Construction pencil 65942 1
Construction pencil (2 units-set) 65941 5
CONSTRUCTION PENCIL
• For general use
REF
Carpenter pencil 65979 1
CARPENTER PENCIL
132
• Ideal system to quickly dram straight lines between two points of the wall or floor.
• Supplied with a bottle of high quality powder for line marker.
REF
MASTER LINE MARKER 70928 6
MASTER CHALK LINE
• Ideal system to quickly dram straight lines between two points of the wall or floor.
• Supplied with a bottle of high quality powder for line marker.• Manufactured in plastic bimaterial ( RUBIFLEX )high resistance to impact.• Includes auxiliary level for leveling rope before tagging.• Lenght of rope: 30 m.
REF
N MASTER LINE MARKER 75925 6
“MASTER-N” CHALK LINE
• Ideal system to quickly dram straight lines between two points of the wall or floor.
• Supplied with a bottle of high quality powder for line marking.• Length of rope: 15m.
REF
LINE MARKER W/TRACING POWDER 70926 6
STANDARD CHALK LINE
• Blue powder for filling the line marker.
REF
SPARE BLUE FOR MAKER 2.2 Lb. (1 kg.) 70929 6
HIGH QUALITY BLUE POWDER FOR LINE MARKER
133
• With a corel collector.
REF
LINE REEL GUIDE DIAM Ø1/8x164 ft. (2.5 mm. x 50 m.) 70933 12
LINE REEL GUIDE DIAM Ø1/8x328 ft. (1.5 x 100 m.) 70934 12
LINE BOBBIN FOR GUIDE
• High resistance polyester cord.
REF
LINE REEL Ø 3/8x164 ft. (1.7 mm. x 50 m) 80933 12
LINE REEL Ø 3/8 x164 ft. (3 mm. x 50 m) 80932 12
LINE REEL
• For marking construction areas.
REF
MARKING TAPE 2x656 ft. (70 mm. x 200 m.) 70920 1
MARKING TAPE 3x656 ft. (100 mm. x 200 m.) 70921 1
MARKING TAPE
• Thin and thick grit.• Smooth out tiles.
REF
ABRASIVE BLOCK 05972 5
CERAMIC BLOCK
• Glue applicator 40W. High performacnce.• 100~240V/50-60Hz• Compatible with bars of Ø11 - Ø12mm• Universal glue.
REF
GLUE GUN APPLICATOR 65940 5
10 GLUE BARS OF 4” (100 mm.) 65945 10
25 GLUE BARS OF 6” (175 mm.) 65946 10
25 GLUE BARS OF 12” (300 mm.) 65944 10
GLUE GUN APPLICATOR
134
• Allows to strike at any angle so as to install the tile into its correct position.
REF
Black rubber mallet 8.8 oz. (250 gr.) 65904 6
Black rubber mallet 17.6 oz. (500 gr.) 65905 6
Black rubber mallet 26.4 oz. (750 gr.) 65908 6
White rubber mallet 8.8 oz. (250 gr.) 65912 6
White rubber mallet 17.6 oz. (500 gr.) 65913 6
White rubber mallet 26.4 oz. (750 gr.) 65914 6
RUBBER MALLET - 2 FLAT SIDES
• Allows to strike at any angle. One flat surface and the other spherical.
REF
Black rubber mallet 8.8 oz. (250 gr.) 66908 6
Black rubber mallet 17.6 oz. (500 gr.) 66909 6
Black rubber mallet 26.4 oz. (750 gr.) 66910 6
White rubber mallet 8.8 oz. (250 gr.) 66905 6
White rubber mallet 17.6 oz. (500 gr.) 66906 6
White rubber mallet 26.4 oz. (750 gr.) 66907 6
RUBBER MALLET - FLAT/SPHERICAL SIDES
• Fot a good settlement of tiles.• Waterproof and high wear resistance wood.• Perfect flatness.• Dimensions: 15 3/4” x 5 3/4” (40x14,5 cm.)• Ref. 72980 with white natural rubber sheet to prevent damage to the ceramic.
REF
Tile beating block 16” x 5 3/4” (40 x 14.5 cm.) 65978 1
Tile beating block with rubber sheet 16” x 5 3/4” (40 x 14.5 cm.) 72980 1
TILE BEATING BLOCK
135
SUCTION CUP• Maximum load capacity: 88 Lb. (40 kg.)
REF
Suction cup 65900 1
DOUBLE SUCTION CUP• Body made of highly resistan aluminium. With ergonomic handle for greater confort.• Maximum load capacity : 176,4LB ( 80 kgs ).
REF
Double suction cup 66900 1
TRIPLE SUCTION CUP• Body made of highly resistant aluminium. With ergonomic handle for greater comfort.• Maximum load of capacity: 220,5LB ( 100 kg ).
REF
Triple suction cup 66904 1
136
• Bench of great stability, ideal for preparation works.• Work height 35 1/2” (90cm).• Large working surface, 45” x 25” (115x65 cm.) that offers versabliliy. • Board made of water- resistant DM wood ( chipboard ).• Easy assembly.
REF
Workbench 19901 1
WORKBENCH
• With 3 adjustable heights: 22 1/2”, 24 7/16” and 26 13/32” (57, 62 and 67 cm.).• Dimensions of work surface: 41” x 17” (106 x 42 cm.).
REF
Adjustable table 41” x 17” (106 x 42 cm.) 65903 1
ADJUSTABLE TABLE
• Light and highly functional tool box. With wheels and handle for transport.• Coves with 2 holders and 4 fitments for attaching objects using elastic bands.• Consists of 1 tray with 14 compartments that can be configured to specific needs
and 1 inside tray with 4 compartments.• Capacity 16 Gl. ( 60 L ).• Dimensions: 24” x 14” x 16” (61 x 37 x 42.5 cm ).
REF
Plastic tool box for buider 71954 1
TOOL BOX
• Large tool box. With wheels and handles for transport.• Lid with 2 pockets and 4 hangers to fix objects with rubber bands (Not Included).• It contains and internal tray with 4 compartments.• Capacity: 47.6 GL ( 180 L ).• Dimensions: 29” x 19” x 19” (75 x 48.7 x 49.3 cm).
REF
PROFESSIONAL TOOL BOX 75965 1
PROFESSIONAL TOOL TRUNK
137
• For liquids, sand, aggregates, etc.• Capacity of 2.9 gl. (10 L.). Internally graduated 1 by 1 liter. • Includes galvanized steel handle for easy transportation and for connection to
cranes and winches.• Material: high strength and flexibility rubber.• Dimensions: 12” (300mm) top diameter, 9” (193 mm) base diameter, 8 1/2” (290
mm.) height. • Not for food transport.
REF
Rubber bucket 2.6 Gl. (10L.) 84950 1 130
RUBBER BUCKET
• For liquids, sand, aggregates, etc.• Capacity of 2.9 gl. (10 L.).• Includes galvanized steel handle for easy transportation and for connection to
cranes and winches.• Material: high strength and flexibility rubber.• Dimensions: 14 3/16” (360 mm.) top diameter, 9” (226 mm.)base diameter, 8 5/8”
(215 mm.) height.• Not for food transport.
REF
Low rubber bucket 2.6 Gl. (10L.) 84949 1 90
LOW RUBBER BUCKET
• For sand, aggregates, etc.• Capacity of 2.9 gl. (10 L.).• Ergonomic handles for easy transportation.• Material: high strength and flexibility rubber.• Dimensions: 19” (480 mm.) top diameter, 11 1/4” (285 mm.),8 5/8” (219 mm.)
height.• Not for food transport.
REF
Rubber basket 2.9 Gl. (10L.) 84951 1 56
RUBBER BASKET
• For manual mixing mortars.• Capacity of 3.2 gl. (12 L.), with ergonomic handles for easy transportation.• Material: high strength and flexibility rubber.• Dimensions: 16 5/32” (410 mm.) top diameter, 8 9/32” (210 mm.) base diameter, 5
19/32” (140 mm.) height.• Not for food transport.
REF
Square bucket 3.2 Gl. (12 L.) 84948 1 100
SQUARE BUCKET
138
• Head of special wrought tempered steel. Beech handle
REF
Mallet 24.7 oz. (700 gr.) 71986 6
Mallet 35.3 oz. (1000 gr.) 71987 6
Mallet 49.4 oz. (1400 gr.) 71988 6
MALLET WITH WOODEN HANDLE
• Head of special wrought tempered steel. • Ergonomic handle RUBIFLEX: - Unbreakable structure with resistant-section fibre-glass nucleus, optimised for
shoc absorption, increasing the durability of the handle. - Security connection between handle and steel head by inverse cone. - Grip with elastic slip-proof elastic and surface grooves for maximum hold.
REF
Mallet 24.7 oz. (700 gr.) 71989 6
Mallet 35.3 oz. (1.000 gr.) 71990 6
Mallet 49.4 oz. (1.400 gr.) 71991 6
MALLET WITH RUBIFLEX HANDLE
• Head of special wrought tempered steel. • Ergonomic handle RUBIFLEX: - Unbreakable structure with resistant-section fibre-glass nucleus, optimised for
shock absorption, increasing the durability of the handle. - Security connection between handle and steel head by inverse cone. - Grip with elastic slip-proof elastic and surface grooves for maximum hold.
REF
Square mallet 24.7 oz. (800 gr.) 71992 6
Square mallet 35.3 oz. (1.000 gr.) 71993 6
Square mallet 44.1 oz. (1.250 gr.) 71994 6
SQUARE MALLET RUBIFLEX HANDLE
139
FRAMER HAMMER WOODEN HANDLE• Forged, adjusted and tempered steel head of 28.2 oz ( 800gr ). Double placer / remover for nails, one magnetised. Beech handle.
REF
Framer hammer 17” (450 mm.) 82991 6
FRAMER HAMMER RUBIFLEX HANDLE• Forged, adjusted and tempered steel head of 28.2 oz ( 800gr ). Double placer / remover for nails, one magnetised.• Ergonomic handle RUBIFLEX: - Unbreakable structure with resistant-section fibre-glass nucleus, optimised for shoc absorption, increasing the durability of the
handle. - Security connection between handle and steel head by inverse cone. - Grip with elastic slip-proof elastic and surface grooves for maximum hold.
REF
Framer hammer 20” (500 mm.) 82986 6
TECHNICAL CHARACTERISTICS RUBIFLEX HANDLE
1. Unbreakable structure with resistant-section fibre-glass nucleus, optimised for shock absorption, increasing the durability of the handle.
Unbreakable structure
Security connection
Elastic slip-proof handle
2. Security connection between handle and steel head by inverse cone.
3. Handle with elastic slip-proof coating and surface grooves for maximum grip.
140
• Made of CrVa. alloy steel. Forged, hardered and tempered cutting edge. Regrindable.
REF
Chisel 8” x 13/16” x 1/2” (200 x 20 x 12 mm.) 70915 10
Chisel 10” x 29/32” x 17/32” (250 x 23 x 13 mm.) 70916 10
Chisel 12” x 29/32” x 17/32” (300 x 23 x 13 mm.) 70917 10
Chisel 14” x 29/32” x 17/32” (350 x 23 x 13 mm.) 70918 10
Chisel 16” x 29/32” x 17/32” (400 x 23 x 13 mm.) 70919 10
FLAT CHISELS
• To remove tiles on renovation jobs.• Made of CrVa. alloy steel. Forged, hardered and tempered cutting edge.
Regrindable.
REF
Wide chisel 10”/2” x 29/32” x 13/32” (250/50x23x13m) 70922 10
Wide chisel 10”/2 3/8” x 1 1/32” x 17/32” (250/60x26x13mm) 70924 10
Wide chisel 10”/2 25/32” x 1 1/32” x 17/32” (250/70x26x13mm) 70932 10
WIDE CHISELS
• Adaptable to chisels with flat body of 29/32” x 17/32” (23 x 13 mm.).• Made of elastomeric material to absorb impacts and protect the hand.
REF
Chisel protector 29/32” x 17/32” (23 x 13 mm.) 72931 10
CHISEL PROTECTOR
• For general use.• Supplied in blister.
REF
Carpenter’s pincer 8 3/4” (220 mm.) 71971 5
Carpenter’s pincer 10” (250 mm.) 71972 5
CARPENTER’S PINCER
141
• Specially for cutting narrow strips of a maximum of 7/16” • (1cm.). Equipped with tungsten carbide scoring wheels with titanium surface
treatment for lonlasting. With a gentle turn, the scoring wheels can be repositioned when their vertex starts getting worn. If totally worn, they can be replaced by their corresponding spare for scoring wheel., Ø 3/4 (18mm )GOLD Spare Scoring wheel Long Life (Ref. 01953).
REF
Nippers for Porcelain Tiles 83942 5
NIPPERS FOR PORCELAIN TILES
• Tungsten carbide edge of great hardness.• To rectify holes on ceramics.
REF
Parrot nippers 65925 5
PARROT NIPPERS
• Special to rectify straight cuts on Porcelain Tiles and other hard materials.
REF
Nippers for hard materials 65952 5
NIPPERS FOR HARD MATERIALS
• Tungsten carbide edge of great hardness.• To rectify cuts of ceramics.
REF
Nippers for ceramic tiles 65926 5
NIPPERS FOR CERAMIC TILES
• Tungsten Carbide edge of great hardness.• To cut and rectify glass mosaic tiles.
REF
Nippers for glass mosaic 71970 5
NIPPERS FOR GLASS MOSAIC
142
ELECTRIC GROUT MORTAR APPLICATORForgroutmortar,siliconesandpolyurethanes,bothrigidandflexiblecartridge.
• Cordless electric applicator for applying grout mortar.• Allows an application adjustable, quick and clean.• Reduce consumption of grout mortar and after grouting dirt.• Auto-reverse pressure to remove the inner tube and prevent loss of material.• With (Ni-Cd) battery of 4.8 V.• Feed rate adjustable from 1/8” to 5/16” a second (4 - 6.5 mm/s.)• Rack and pinion movement.• Can also be used for application of silicone and PU rigid and flexible cartridges.• Includes: applicator gun, 2 batteries, 1 charger, wrench 13 to 20 mm., 3 nozzles, 1 polyurethane piston for grout mortar, 1 special
plastic piston for flexible cartridges and 1 metal piston for rigid cartridges.• Includes a handy carrying case.
REF
Electric grout mortar 700 cc 230V/50-60Hz 66915 1 230V - 50-60Hz
Spare part BATTERY 4.8V (NiCd) for 700cc applicator 66925 1
Practical, fast and clean
143
• Great capacity (650 cc) grout mortat applicator.• Very light structure made of aluminum.• It allows an easy, quick and clean application.• Reduce consumption of grout and after grouting dirt.• Pressure adjustable with trigger.• Replaceable and adjustable nozzles to the joint width.• Also usable for the application of silicone and PU rigid and flexible cartridges.• Quick and clean application.
REF
Manual grout mortar applicator 650 cc. 65990 1
MANUAL GROUT MORTAR APPLICATOR
• Spare parts adaptable to Electric (Ref. 66915) and Manual (Ref. 65990) applicators.
• Includes screw, piston and 3 nozzles.
REF
Set of spare pads for grout mortar applicator 65981 1
SET OF SPARE PADS FOR GROUT MORTAR APPLICATOR
• Spare parts adaptable to Electric (Ref. 66915) and Manual (Ref. 65990) applicators.• Includes 6 nozzles.
REF
Spare nozzles for grout mortar applicator 65980 1
SPARE NOZZLES
ACCESORIES FOR
LAYING DOWN TILES AND
FINISHINGS
LEVELING, MEASUREMENT AND ADJUSTMENT SYSTEMS
TILE SPACERS.
TILE LEVEL.
146
RECTANGULAR LEVEL• Levels manufactured in reliable, resistant aluminium, with two bubbles for the verification of the horizontal and vertical level.• Accuracy: 1/16”ft. (0,5 mm/m.) models 16” to 32” (40 cm. a 80 cm.) and 1/8”/ft (1 mm/m.) models 40” to 79” (100 cm. a 200 cm.).
REF
Rectangular level 16” (40 cm.) 72944 10
Rectangular level 20” (50 cm.) 70945 10
Rectangular level 24” (60 cm.) 70946 10
Rectangular level 32” (80 cm.) 70947 10
Rectangular level 40” (100 cm.) 70948 10
Rectangular level 48” (120 cm.) 70949 10
Rectangular level 63” (160 cm.) 72950 2
Rectangular level 71” (180 cm.) 72951 2
Rectangular level 79” (200 cm.) 72952 2
MAGNETIC RECTANGULAR LEVEL.• Levels manufactured in reliable, resistant aluminium.• Incorporates three bubbles for the verification of the level horizontal, vertical and 45º.• Magnetic base to hold it on metal surfaces such as rulers. Accuracy:1/15”/ft (0,5 mm/m.) for the models 16” to 32” (40 cm to 80
cm)
REF
Magnetic rectangular level 16” (40 cm.) 72945 10
Magnetic rectangular level 20” (50 cm.) 72946 10
Magnetic rectangular level 24” (60 cm.) 72947 10
Magnetic rectangular level 32” (80 cm.) 72948 10
147
WING TYPE LEVEL• Levels manufactured in reliable, resistant aluminium.• Two bubbles for the verification of the level horizontal and vertical. Accuracy:1/8”/ft (1mm/m)
REF
Wing type level 16” (40 cm.) 70959 10
Wing type level 20” (50 cm.) 70960 10
Wing type level 24” (60 cm.) 70961 10
Wing type level 32” (80 cm.) 70962 10
ANTICHOC LEVEL• Level resistant to impacts thanks to its light aluminium structure.• Equipped with 3 bubbles for verification of the level horizontal, vertical and 45º.• Accuracy:3/32”/ft (0,75mm/m.)
REF
ANTICHOC LEVEL 16” (40 cm.) 83980 10
ANTICHOC LEVEL 20” (50 cm.) 83981 10
ANTICHOC LEVEL 24” (60 cm.) 83982 10
ANTICHOC LEVEL 32” (80 cm.) 83983 10
148
POST LEVEL• Adapted for levelling post,fences and pipes in general.• Includes 4 magnetic points and elastic strap.• Accuracy:1/8”/ft (1 mm/m.)
REF
Post level 72923 10
WATER LEVEL• Includes two graduated tanks and 20 metres of hose.• With caps to maintain the hose correctly filled & ready for the next use.
REF
WATER LEVEL 70965 1
TRIPOD FOR LASER LEVEL• Tripod equipped with a regulator to adjust the height up to 12” ( 300mm ).
REF
TRIPOD WITH REGULATOR 40-58” (100-145 cm.) 70975 1
149
RUBILÁSER L4For interior works, ideal for instalations
• Self-levelling laser with projection of 4 lines ( 3 verticals and 1 horizontal) independently selectable.• Self-levelling achieved by a system of pendulums with safety blockage.• Bag with accessories to protect the unit during transportation and storage.• Class 2 laser.• Range: From 66ft ( 20m ) up to 164ft. ( 50m )• Accuracy:+- 1/32”7ft (+-0,3mm/m.)• Self-levelling range: +/-5º• With visual alert of out of level.
REF
RUBILASER L4 75984 1
Self-leveling tracer level
150
RUBIFLEX MEASURING TAPES• Ergonomic chassis technical plastic and rubber.• Approved precision measuring tapes: Class II• Magnetic tape stopper.• Only available in mm.
REF
RUBIFLEX measuring tape 3m X 19mm 75900 12
RUBIFLEX measuring tape 5m X 19mm 75901 12
RUBIFLEX measuring tape 8m X 25mm 75902 12
IRONBLADE MEASURING TAPES• Metal case with rubber coating to improve grip.• Approved precision measuring tapes: Class II• Automatic tape lock.• Only available in mm.
REF
IRONBLADE measuring tape 3m X 19mm 75903 12
IRONBLADE measuring tape 5m X 19mm 75904 12
IRONBLADE measuring tape 8m X 25mm 75905 12
• Leather holder that fits on any belt, for measuring tapes of 5 and 8 m.
REF
Measuring tape holder 72920 10
MEASURING TAPE HOLDER
151
DISTANCE MEASURERTo calculate distances, areas and volumes both indoors and outdoors.
• Distance measurer with a highly accurate laser beam.• High visibility measurement reference point.• Easy to use, allows the addition, subtraction and multiplication distances.• Includes a function to calculate areas & volumes and aheights (Pythagoream theorem).• Includes:belt holder, silicone protective cover, calculator, notepad and pencil.• Maximum range: 164ft ( 50m ).• Minimum measure:8” (20cm).• Accuracy: +/- 1/32”/ft ( +/- 2mm )
REF
LASERMETER M10 75922 10
Compact and accurate
152
• Lenght of line:16,4 ft.(5 m).• Includes wooden dolly.• Supplied in blister.
REF
Bob plumb 21.2 oz. (600 gr.) 70964 6
Bob plumb 28.2 oz. (800 gr.) 70967 6
Bob plumb 35.3 oz. (1000 gr.) 70963 6
BOB PLUMBS
• Lenght of line:16,4 ft.(5m).• With magnet in the dolly.
REF
Bob plumb 21.2 oz. (600 gr.) with magnetic 70968 6
Bob plumb 28.2 oz. (800 gr.) with magnetic 70969 6
BOB PLUMBS WITH MAGNET
• Square tubing 1 5/8” x 13/16” ( 40x20mm ) with high dimensional stability.• With bichromated treatment.
REF
SQUARE-16” (40 cm.) 60992 1
SQUARE- 24” (60 cm.) 60993 1
SQUARE- 32” (80 cm.) 60994 1
SQUARES
• RUBINET sponge.• Rubber float SUPERPRO plastic.• STEEL trowel 1/4” x 1/4” ( 6x6 cm )plastic handle.• STEEL trowel R-10 plastic handle.• Nippers for ceramic tiler.• “MASTER-N” chalk line real.• 1/8” ( 3mm ) spacers ( bag 200 units ).• 3/16” ( 5mm ) spacers( bag 500 units ).• Red crayon.
REF
Tiling accessory set 69933 1
TILLING ACCESSORY SET
153
TILE SPACERS & WEDGES•TileSpacers,“T“andwedgesforthecorrectplacementofceramics.Qualitybasematerial.
• For wall & floor tiles with minimum joint.• Quality base material, without impurities or imperfections.
REF
TILE SPACERS 1/32” (1 mm.) - (B-300 u.) 02911 10
TILE SPACERS 1/32” (1 mm.) - (B-1000 u.) 02030 1
Tile spacers 1/32” ( 1mm).
• For wall & floor tiles with minimum joint.• Quality base material, without impurities or imperfections.
REF
TILE SPACERS 1/16” (1.5 mm.) - (B-300 u.) 02912 10
TILE SPACERS 1/16” (1.5 mm.) - (B-1.000 u.) 02031 1
Tile Spacer 1/16” (1,5mm.)
• For wall tiles.• Quality base material, without impurities or imperfections.
REF
TILE SPACERS 3/32” (2 mm.) - (B-300 u.) 02901 10
TILE SPACERS 3/32” (2 mm.) - (B-1.000 u.) 02000 1
Tile Spacer 3/32” (2mm.)
• For wall tiles.• Quality base material, without impurities or imperfections.
REF
Long TILE SPACERS 3/32” (2 mm.)-L - (B-300 u.) 02952 10
Long TILE SPACERS 3/32” (2 mm.) -L -(B-1000 u.) 02972 1
Long Tile Spacers 3/32” (2 mm. L)
• For floor tiles with thin joint.• Quality base material, without impurities or imperfections.
REF
TILE SPACERS 1/8” (3 mm.) -(B-200 u.) 02902 10
TILE SPACERS 1/8” (3 mm.) -(B-1.000 u.) 02001 1
Tile Spacers 1/8” (3mm.)
154
TILE SPACERS & WEDGES•TileSpacers,“T“andwedgesforthecorrectplacementofceramics.Qualitybasematerial.
• For large ceramic format and rectified.• Quality base material , free from impurities and imperfections.• Redesigned internal geometry. High flexural strength and crushing.• Ideal for large format tiles in walls.
REF
Long TILE SPACERS 1/8” (3 mm.)-L -(B-200 u.) 02953 10
Long TILE SPACERS 1/8” (3 mm.)-L -(B-1000 u.) 02973 1
Long Tile Spacers 1/18” (3mm. L) “Reinforced “
• For floor tiles.• Quality base material , free from impurities and imperfections.• Redesigned internal geometry. High flexural strength and crushing.• Ideal for large formats.
REF
TILE SPACERS 5/32” (4 mm.) -(B-200 u.) 02954 10
TILE SPACERS 5/32” (4 mm.) -(B-1000 u.) 02974 1
Tile Spacer 5/32” (4mm.) “ Reinforced “
• For floor tiles.• Quality base material, without impurities or imperfections.• Hollow structure with internal reinforcements. Supports the tensions and
allows to leave into the joint and to grout over.
REF
TILE SPACERS 3/16” (5 mm.) -(B-100 u.) 02903 10
TILE SPACERS 3/16” (5 mm.)-(B-1.000 u.) 02002 1
Tile Spacers 3/16” (5mm.)
• Reinforced tile spacer specially for large format tiles.• Quality base material , free from impurities and imperfections.• Underside designed for a good settlement into the joint.
REF
TILE SPACERS 3/16” (5 mm.) RIGID -(B-100 u.) 02955 10
TILE SPACERS 3/16” (5 mm.)RIGID (B-1.000 u.) 02975 1
Tile Spacers 3/16” (5mm.) Rigid
• For floor tiles.• Quality base material, without impurities or imperfections.• Hollow structure with internal reinforcements. Supports the tensions and
allows to leave into the joint and to grout over.
REF
TILE SPACERS 1/4” (6 mm.) - (B-100 u.) 02036 10
TILE SPACERS 1/4” (6mm.)( B-500 u.) 02390 1
Tile Spacers 1/4” (6mm.)
155
TILE SPACERS & WEDGES•TileSpacers,“T“andwedgesforthecorrectplacementofceramics.Qualitybasematerial.
• For floor tiles.• Quality base material, without impurities or imperfections.• Hollow structure with internal reinforcements. Supports the tensions and
allows to leave into the joint and to grout over.
REF
TILE SPACERS 9/32” (7 mm.) -(B-100 u.) 02904 10
TILE SPACER 9/32” (7mm.) ( B-500 u.) 02391 1
Tile Spacers 9/32” ( 7mm.)
• For floor tiles.• Quality base material, without impurities or imperfections.• Hollow structure with internal reinforcements. Supports the tensions and
allows to leave into the joint and to grout over.
REF
TILE SPACERS 5/16” (8 mm.)-(B-50 u.) 02037 10
TILE SPACER 5/16” (8mm.)-( B-500 u.) 02392 1
Tile Spacers 5/16” (8mm.)
• For inductrial or rustic tiles.• Quality base material, without impurities or imperfections.• Hollow structure with internal reinforcements. Supports the tensions and
allows to leave into the joint and to grout over.
REF
TILE SPACERS 13/32” (10 mm.) -(B-50 u.) 02905 10
TILE SPACER 10mm.-( B-500 u. ) 02393 1
Tile Spacers 13/32” (10mm.)
• Ideal for “brick style” tiling and perimeters.• Quality base material, without impurities or imperfections.
REF
“T” spacers 1/8” (3 mm.) -(B-200 u.) 02923 10
“T” spacers 1/8” (3 mm.) -(B-1000 u.) 02063 1
“T” 3/16” (3mm.)
• Ideal for “brick style” tiling and perimeters.• Quality base material, without impurities or imperfections.• Hollow structure with internal reinforcements. Supports the tensions and
allows to leave into the joint and to grout over.
REF
“T” spacers 3/16” (5 mm.) -(B-100 u.) 02924 10
“T” spacers 3/16” (5 mm.) -(B-1.000 u.) 02064 1
“T” 3/16” (5mm.)
156
TILE SPACERS & WEDGES•TileSpacers,“T“andwedgesforthecorrectplacementofceramics.Qualitybasematerial.
• Ideal for “brick style” tiling and perimeters.• Quality base material, without impurities or imperfections.• Hollow structure with internal reinforcements. Supports the tensions and
allows to leave the joint and to grout over.
REF
“T” spacers 9/32” (7 mm.) -(B-100 u.) 02925 10
“T” Spacers for 9/32” ( 7mm.)- ( B-500 un. ) 02394 1
“T” 9/32” (7mm.)
• Ideal for “brick style” tiling and perimeters.• Quality base material, without impurities or imperfections.• Hollow structure with internal reinforcements. Supports the tensions and
allows to leave into the joint and to grout over.
REF
“T” spacers 13/32” (10 mm.) -(B-50 u.) 02926 10
“T” spacers 13/32” (10mm.)-( B-500 u. ) 02395 1
“T” 13/32” (10mm.)
• Wedges for tiling.• Quality base material, without impurities or imperfections.
REF
Wedges 3/16” (5mm.)- ( B-500 u.) 02396 10
Wedges 3/16” (5 mm.)-(B-500 u.) 02950 10
Wedges 5/16” (7,5mm.)- ( B-500 u.) 02397 10
Wedges 5/16” (7,5 mm.)- (B-500 u.) 02951 10
Wedges
Tile spacers & “T” per Sq. Yd./m2 according to the tile format
(10x10)
(100)
(200)
89
178
(15x15)
(49)
(91)
41
82
(20x20)
(25)
(50)
24
48
(30x30)
(16)
(25)
12
26
(40x40)
(9)
(15)
7
14
(45x45)
(9)
(13)
6
12
(50x50)
(4)
(8)
5
10
(60x30)
(8)
(16)
7
14
(60x60)
(4)
(6)
5
10
cmInch
m2
m2
sq. ft.
sq. ft.
157
• Orders by boxes only. Contains bag with label.
REFTILE SPACERS 1/32” (1 mm.) - (45 x 300 pc.) DIS-PLAY BOX 02123 45 300
TILE SPACERS 1/16” (1.5 mm.) - (36 x 300 pc.) DIS-PLAY BOX 02124 36 300
TILE SPACERS 2/32” (2 mm.) - (65 x 300 pc.) DIS-PLAY BOX 02125 65 300
TILE SPACERS 2/32” (2 mm.)-L - (45 x 300 pc.) DIS-PLAY BOX 02126 45 300
TILE SPACERS 1/8” (3 mm.) - (40 x 200 pc.) DISPLAY BOX 02127 40 200
TILE SPACERS 1/8” (3 mm.)-L - (40 x 200 pc.) DIS-PLAY BOX 02128 40 200
TILE SPACERS 5/32” (4 mm.) -(30 x 200 pc.) DISPLAY BOX 02129 30 200
TILE SPACERS 3/16” (5 mm.) - (40 x 100 pc.) DIS-PLAY BOX 02130 40 100
TILE SPACERS 1/4” (6 mm.) - (25 x 100 pc.) DISPLAY BOX 02131 25 100
TILE SPACERS 9/32” (7 mm.) - (20 x 100 pc.) DIS-PLAY BOX 02132 20 100
TILE SPACERS 5/16” (8 mm.) (35 x 50 pc.) DISPLAY BOX 02133 35 50
TILE SPACERS 13/32” (10 mm.) - (15 x 50 pc.) DIS-PLAY BOX 02135 15 50
WEDGES - 3/16” (5 mm.) - (50 x 500 pc.) DISPLAY BOX 02279 50 500
WEDGES - 5/16” (7.5 mm.) - (35 x 500 pc.)DISPLAY BOX 02274 35 500
DISPLAY BOX
• Orders by boxes only. Contains bags with label.
REFTILE SPACERS 1/32” (1 mm.) - (48 x 300 pc.) CO-LUMN BOX 02173 48 300
TILE SPACERS 2/32” (2 mm.) - (66 x 300 pc.) CO-LUMN BOX 02175 66 300
TILE SPACERS 1/8” (3 mm.) - (54 x 200 pc.) CO-LUMN BOX 02177 54 200
TILE SPACERS 5/32” (4 mm.) - (36 x 200 pc.) CO-LUMN BOX 02179 36 200
TILE SPACERS 3/16” (5 mm.) - (42 x 100 pc.) CO-LUMN BOX 02180 42 100
TILE SPACERS 9/32” (7 mm.) - (22 x 100 pc.) CO-LUMN BOX 02183 22 100
TILE SPACERS 13/32” (10 mm.) - (24 x 50 pc.) CO-LUMN BOX 02186 24 50
WEDGES - 3/16” (5 mm.)- (54 x 500 pc.) COLUMN BOX 02188 54 500
COLUMN BOX
TILE LEVEL
• Ideal for laying tiles over 12x12” (30x30cm) with back-buttering.• Allows laying pieces of granite and marble avoiding rectification work.• Eliminates lippage during setting of the adhesive.• Improves resulting surface flatness.• Reduces installation time and improves profitability.
• Caps can be reused up to 25 times.• Usable floor and wall (horizontal and vertical tile laying).
• For pieces with thickness from 1/8” (3mm) to 3/4” (20mm).
• For minimum joint of 1/32” (0,75mm).
FAST LEVELING SYSTEM
(30x30)
(42)
12x12”
4
(33x33)
(36)
13x13”
4
(40x40)
(20)
16x16”
2
(45x45)
(28)
18x18”
2,5
(50x50)
(24) (22) (16)
20x20”
2 2 1,6
(60x60)
(10)
24x24”
1
(80x80) (60x30) (100x50)
(10)
32x32” 24x12” 40x20”
1
(120x60)
(10)
48x24”
1
“ CAPS & STRIPS ” needed per m2 depending on the format of the ceramic
158
cmInch
m2sq. ft.
159
TILE LEVEL SET• The set consists of a pliers, 100 strips and 100 reusable caps.• Packaged in a handy bucket.
REF
TILE LEVEL set 02992 1
• Can be used for floor and wall tiles.
REF
TILE LEVEL pliers 02982 1
TILE LEVEL PLIERS
• For tiles between 1/8” and 13/16” ( 3mm and 20mm ).• Thick with a grout joint of at least 1/32” ( 0,75mm ).
REF
TILE LEVEL strip (C-100 u.) 02981 1
TILE LEVEL strip (B-200 u. ) 02948 12
TILE LEVEL strip (B-400 u. ) 02949 6
TILE LEVEL STRIPS
• Can be reused up to 25 times.
REF
TILE LEVEL cap (C-100 u.) 02980 1
TILE LEVEL cap (B-200 u.) 02946 15
TILE LEVEL cap (B-400 u.) 02947 8
TILE LEVEL CAPS
SAFETY EQUIPMENT
PERSONAL EQUIPMENT FOR BUILDING PROFESSIONALS
162
• Professional knee pads of great comfort.• Made of absorbent material to protect against knocks and bumps of the ground.• Its internal design is perfectly adaptable to the user’s knee.• Big leaning surface for optimum stability.• Adjustable superior fastener.• Conforms to EN14404.• Protection level: 0
REF
Professional knee pads 65915 6
PROFESSIONAL KNEE PADS
• Articulated ergonomic two piece knee pads. Excellent protection.• Secured by adjustable elastic band and easy to adjust upper closure.• Interior made of soft material adaptable to the knee.• Removable frontal part made of highly adherent rubber for greater stability.• Conforms to EN14404.• Protection level: 1
REF
Articulated knee pads 81987 6
ARTICULATED KNEE PADS
163
• Protection ergonomic flexible. Adjustable elastic band fastener.• Professional knee pads of high comfort.• Inner body soft materials suitable to the user,• Flexible and resistant outer shell.• Conforms to EN14404.• Protection level: 1
REF
FLEX knee pads 81994 6
FLEX KNEE PADS
• Ergonomic design professional and high comfort knee pads.• Its design combines the use of hard materials against impacts and uneven floors and soft materials therein, adapted to the user’s
anatomy.• In addition to protecting the user’s knees through the use of silicone gel inside, its studied ergonomics provide them with great
stability, preventing ligaments and tendons fatigue.• They incorporate two bands Neoprene closure.• Conforms to EN14404.• Protection level: 1
REF
GEL COMFORT knee pads 81998 6
GEL COMFORT KNEE PADS
164
GEL DUPLEX KNEE PADS• Professional knee pads with ergonomic design. Highly comfortable.• Their design combines the use of hard materials to protect against impacts and uneven floors and soft materials adaptable to the
user’s anatomy on the inside.• Besides protecting the user’s knees thanks to the silicone gel in their inside, their studied ergonomics gives them great stability,
preventing ligaments and tendons fatigue.• Wide range of uses thanks to their design “ two in one “:• Can be used together with the external rubber protection of great stability and resistance.• With the main body only, less bulky, which allows the knee to slide without problem over smooth surfaces.• They incorporate a double fastener, inferior and superior, easy adjustable.
REF
GEL DUPLEX knee pads 81989 6
• Aluminum chassis high strength and stability.• Allows an ergonomic position of comfort.• Prevents injuries in knees and back.• Adjustable seat height and angle for optimum adaptation to each use.• Robust construction with 7 heavy duty wheels.• Includes tray for tools and accessories.• Ideal for flooring, parquet installation, cleaning and other operations on pavements tasks.• Replaceable ergonomic knee.• Maximum weight: 286 lb. (130 kg.)
REF
SR-1 ergonomic seat 81999 1
SR-1 ERGONOMIC SEAT
165
• Polyurethane cushion for protecting the knees.• Makes it easy to work on the floor without using knee pads.• Its wide surface allows its use as a seat.
REF
Knee cushion 65943 1
KNEE CUSHION
• Field of use; Liquids and coarse dust particles.• Mechanical resistance to particles at great speed and half energy.• Adjustable ventilation points to prevent lens fog up.• Conforms to EN166.
REF
Protective goggles 80902 6
PROTECTIVE GOGGLES
• Field of use: basic.• Mechanical resistance to high speed particles, low energy.• Extendable in length and vertically adjustable side pieces.• Anti-scratch and anti-fog.• UV Filter.• Comfortable and light.• Conforms to EN166 and EN170
REF
White lens goggles 80918 12
WHITE LENS GOGGLES
• Comfortable and effective protection for high noise environments.• Conforms to EN352-1.
REF
Ear protector 80903 6
EAR PROTECTOR
166
• Dust filter mask type: FFP2.• Use in dusty environments.• Conforms to EN149.• Supplied in blister (sets of 3 units).
REF
Felt mask (blister) 80900 6
FELT MASK
• Adjustable pressure. Can be used on both hands.
REF
Wristband 80909 6
WRISTBAND
• Recommended to avoid low-back injuries when loading weight or maintain fixed positions.
• With vertical reinforcement in the lower-back area.• Side devices to adjust the pressure at the time of stress.• Available in 3 sizes: M, L and XL
REF
Lumbar protector - M 80912 1
Lumbar protector - L 80913 1
Lumbar protector - XL 80914 1
LUMBAR PROTECTOR
• Protective gloves against mechanical risks.• High resistance to abrasion and tearing.• Protection level: 4132• Size 10• Conforms to EN338
REF
Reinforced gloves 80906 6
REINFORCED GLOVES
167
• Ideal for wet or abrasives tasks.• For minimal risks only.• Made of 100% latex.• Conforms to EN420.
REF
Latex gloves 20907 25
LATEX GLOVES
• Increases contact by 100% approx.
REF
Set of smooth soles 05985 1
SET OF SMOOTH SOLES
• Approximate increase of the contact surface 100%.• Allow walking on mortar or adhesive screeds without damage in excess.
REF
Set of soles with tips 05986 1
SET OF SOLES WITH TIPS
• Made of plastic material resistant to tearing.• Sealed seams for maximum waterproofing.• Jacket with built-in pockets and adjustable hood.• Double zip closure with snap buttons.• Pants with elastic waistband for comfort.
REF
Waterproof suit GREEN - L 81945 5
Waterproof suit GREEN - XL 81946 5
Waterproof suit GREEN - XXL 81947 5
WATERPROOF SUIT
RUBINET: PRODUCTS AND ACCESSORIES FOR CLEANING AND LAYING TILES
CLEANERS AND POLISHERS
CLEANING AND MAINTENANCE
Acid descaler for flooring: glazed ceramics, porcelain stoneware, baked clay, klinker,
natural stone (not polished or sensitive to acids) and synthetic stone.
USE The product is for removing cement stuck to floors. Its descaling property is based
on a surface-active agent and chemical reaction that rapidly removes incrustations
from acid-resistant surfaces (stoneware, klinker, etc). It acts rapidly on incrustations
or deposits from building work.
CEMENT REMOVER
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
Apply directly or diluted, depending onthe amount of cement to be removed.For glazed ceramic and porcelain sto-neware: dilute 1:10 with water. For baked clay flooring: dilute 1:5 with water.For natural stone flooring artificial, nonacid sensitive stone: dilute by bet-ween 1:10 and 1:15 with water (depen-ding on type of stone and finish).
FINISH
Before drying, rinse thoroughly withwater and a soft RUBINET® sponge.
APPLICATION
The cement must be fully set beforeremoving. Remove the incrusted cement with a spatula before applying theCEMENT REMOVER.Apply the product and leave it to workfor 4 or 5 minutes. Rub with a soft orabrasive RUBINET® sponge, dependingon the type of surface.
Ph: 1 | Density: 2,3 Lb / 0,2 gl (1.05 kg/l).Yield: 1:1 dilution: 129-172 Sq.ft. / 0,2 gl (12-16 m2/l.) 1:10 dilution: 430-484 Sq.ft. / 0,2 gl (40-45 m2/l.) 1:5 dilution: 269-323 Sq.ft. / 0,2 gl (25-30 m2/l.)
The CEMENT REMOVER is an acidic product.Do not swallow.Keep out of the reach of children.Irritating to eyes, respiratory system and skin.In case of contact with eyes, rinse immediatelywith plenty of water and seek medical advice.Wear suitable protective clothing, gloves andeye/face protection.
If swallowed, seek medical advice immediatelyand show this container or label.Do not use in non-acid resistance materials.Direct contact may fade colour in dark joints ormetal surfaces (aluminium, inox steel, iron).Always carry out a small test before full application.
CHARACTERISTICSAND YIELD
Cement.Baked clay, porcelain tiles, exposed brick, glazed ceramics, klinker,synthetic and natural stone (not sensitive to acids).
PRECAUTIONS
· Transparent liquid with a slightly acrid smell, made of inorganic acids diluted in water and a non-ionic surface-active agent.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 20 gl - 100 L 40 gl -200 L
PACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED POLYURETHANE DRUM)
Ref. 20925 6u. 20926 3u. - - - - 8413797209259 8413797209266 - - - -
APPLICABLE ON STAINS TYPES
1
170
Product formulated with organic acid, valid as a descalant for ceramics, baked clay, earthenware,
clay, klinker, natural and artificial stones (not for polished stones or those sensitive to acids).
USE Product suitable for breaking up and removing remains of cement on many surfaces.
Its special formula based on organic acid does not cause noxious fumes that attack
metallic surfaces.
CEMENT REMOVERCOMPATIBLE WITH METALS
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
The cement to be removed must be hardened. In the case of inlayed material,remove previous remains with the help of a spatula.
FINISH
Rinse thoroughly with water in order toensure the complete disappearance ofany remains of the product, rinsingmore than once if necessary.
APPLICATION
On surfaces: Apply generous amounts ofproduct, undiluted, directly over the remainsof cement. Leave for 10 minutes. Carry out asecond appli-cation of undiluted product andleave to work for another 10 minutes. Afterthis time, rub the surface with a RUBINETscouring pad smooth or abrasive dependingon the characteristics of the surface.On metals: Apply the product, undiluted,directly over the remains of cement. Leave itto work for 3-5 minutes. Rub with a smooth RUBINET scouring pad without scratchingthe metal.
APPLICABLE ON STAINS TYPES
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 20 gl - 100 L 40 gl -200 L
PACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED POLYURETHANE DRUM)
Ref. 20952 6u. 20953 3u. - - - - 8413797209525 8413797209532 - - - -
Ph: 1 | Density: 1,9 Lb / 0,2 gl. (1.066 kg/l).Yield: 258-323 Sq.ft. / 0,2 gl. (2 m2 /l) (esti-mated)
Do not take orally. Skin irritant. Risk of severeeye damage. Keep out of reach of children.In case of contact with the eyes, rinse immediatelywith water and go to the doctor.In case of contact with the skin, rinse immediatelywith water. In case of swallowing, go to thedoctor immediately taking the label or the packwith you.Use suitable gloves and protection for the eyesand face.
ATTENTION: Do not apply on surfaces sensitiveto acids (marble, granite, terrazzo, etc.). Itmay bleach dark coloured joints.ATTENTION: in some kinds of metals, thealkalinity of the cement may damage or bleachthe surface of the metal.ATTENTION: Carry out a test on a small partof the surface before the application. In thecase of iron, this product may accelerate thenatural process of corrosion of this metal.
CHARACTERISTICSAND YIELD
PRECAUTIONS
·Transparent liquid made up of an organic acid and an anionic surfactant..
Ceramics, earthenware, baked clay, klinker, natural and artificial stones (not for polis-hed stones or those sensitive to acids) and metals (see precautionary measures)
Cement.
4
171
This product is especially formulated for descaling and cleaning all types of residue from grout
joints in flooring and coverings quickly and efficiently.
USE It removes dirt cleanly and easily from baths, kitchens, and bedrooms without harming
the surfaces.
The GROUT CLEANER should only be used on stoneware, porcelain, ceramic and
baked clay, i.e. in acid-resistant materials.
GROUT CLEANER
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
Use without diluting.
FINISH
Remove dirt with a mop or cloth andabundant water. If the dirt persists,repeat the application and rub with abrush, sponge, or similar object. Followby rinsing.
APPLICATION
Apply directly to the joints so that theyare covered by the product.Leave the product for a maximum of 2 to 3 minutes. The product should be used on small surfaces of 3 to 4 tiles at a time.
CHARACTERISTICSAND YIELD
Ph: 1.5 | Density: 2,5 Lb / 0,2 gl (1.13 kg/l).Yield: without diluting: 328 ft. (100 m) linear 0,2 gl. (1 l.)
The SEAM CLEANER is an acidic a product.Do not swallow.Irritating to eyes and skin.Keep out of the reach of children.In case of contact with eyes, rinse immediatelywith plenty of water and seek medical advice.If swallowed, seek medical advice immediatelyand show this container or label.
Wear suitable gloves.Do not use in non-acid resistance materials.Direct contact may fade colour in dark joints ormetal surfaces (aluminium, inox steel, iron).Always carry out a small test before full application.
Dirty JointsBaked clay, porcelain tiles, glazed ceramics, in general,non-acid sensitive materials.
40 gl -200 L
APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Light transparent colourless liquid.· A mixture of inorganic acid diluted in water and a non-ionic surface-active agent.
0,75 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 20 gl - 100 LPACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED POLYURETHANE DRUM)
Ref. 20965 6u. - - - - - 8413797209655 - - - - -
2
172
This product is suitable for cleaning natural and synthetic stone, roof tiles, glazed brick,
stoneware, and porcelain stoneware. It removes stains caused by cement, lime, and environmental
pollution (fumes, steam, etc).
USE This product does not contain abrasives or other agents that could attack the
stone, therefore it may be used with complete safety.
Suitable for: cleaning façades and monuments and restoring floors (terrazzo, sto-
neware, porcelain stoneware, stone, etc).
STONE CLEANER
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
For glazed ceramic, porcelain stonewareand baked clay flooring: dilute 1:2 withwater.For natural stone flooring: dilute by bet-ween 1:5 and 1:10 with water (depen-ding on type of stone and finish).It may also be applied without diluting.
FINISH
Rinse with abundant water, rubbing with a RUBINET® abrasive sponge.
APPLICATION
Apply the product using an abrasiveRUBINET® sponge, leaving the pro-duct to work for 5 to 15 minutes,depending on the amount of dir t.
CHARACTERISTICSAND YIELD
Ph: 1.2 | Density: 2,2 Lb / 0,2 gl (1.02 kg/l).Yield: 1:1 dilution: 258-323 Sq.ft. / 0,2 gl (24-30 m2/l.) 1:2 dilution: 430-538 Sq.ft. / 0,2 gl (40-50 m2/l.) dilution between 1:5 and 1:10 645-753 Sq.ft. / 0,2 gl (60-70 m2/l.)
The STONE CLEANER is an acidic product.Do not swallow.Keep out of the reach of children.Do not use in non-acid resistance materials.
Direct contact may fade colour in dark joints ormetal surfaces (aluminium, inox steel, iron).Always carry out a small test before full application.
Cement, glue, coffee, fruit juices, blackening, lemon, vinegar,maintenance, pollution, rust, urine, vomit, plaster..
Baked clay, facing brick work, klinker, concrete, stoneware, porcelain tiles,synthetic and natural stone (not sensitive to acids).
APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Light, transparent, colourless liquid.· A mixture of diluted inorganic acid, solvents,
and a surface-active agent.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 20 gl - 100 L 40 gl -200 LPACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED POLYURETHANE DRUM)
Ref. 20950 6u. - - - - - 8413797209501 - - - - -
3
173
Detergent-degreasing product suitable for cleaning façades, exposed brick, ceramics, and any
interior or exterior finish used in construction in general.
USE Suitable for cleaning all kinds of stone, floor and wall. Ideal for removing organic
material of all kinds absorbed in ceramics, enabling such material to be removed with
water. It does not alter the colour or composition.
Also recommended for routine maintenance.
UNIVERSAL CLEANER
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
Dilute to a proportion of 1.1 or, if necessary, 1:5 product to water, depen-ding on the amount of dirt on the surface.
FINISH
Rinse with abundant water and a soft RUBINET® sponge, using steam machi-nes or pressurised water.
APPLICATION
Apply the product by rubbing with a soft or abrasive RUBINET® sponge, depending on the type of surface.
CHARACTERISTICSAND YIELD
Ph: 12.5 | Density: 2,2 Lb / 0,2 gl (1.01 kg/l).Yield: 54-108 Sq.ft. / 0,2 gl. (5-10 m2/l) undiluteddilute between 1:5 and 1:10 129-172 Sq.ft. / 0,2 gl. with water: 40-50 m2/l. (maintenance)
The UNIVERSAL CLEANER is a basic product.Do not swallow.
Keep out of the reach of children.Always carry out a small test before full application.
Oil, dirt, food and maintenance.Mosaic, baked clay, slate, facing bricks and stoneware. APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Light transparent red liquid. · Alkaline product, a mixture of hydroxide,
phosphates, silicates, and a surface-active agent.
· Contains colouring and perfume.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 LPACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED POLYURETHANE DRUM)
Ref. 20920 6u. 20921 3u. - - - - 8413797209204 8413797209211 - - - -
10
174
This product is suitable for removing grease stains from all kinds of materials.
It is particularly suitable for highly porous materials (baked clay, non-polished stone).
USE Effectively removes grease stains and vegetable and mineral oils that have penetrated
the material and which would be extremely difficult to remove with normal maintenan-
ce products. It is particularly effective on recent stains (no longer than a few weeks).
CLEANER FOR RECENT STAINS
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
We recommend cleaning first with UNIVERSAL CLEANER and treating any remaining stains with CLEANER FOR RECENT STAINS.Shake well before use. Use without diluting.
FINISH
Remove the remains with a brush, and use a cloth or broom for any powder residue. If any stain remains, the opera-tion may be repeated.
APPLICATION
Apply the product directly onto the stain, making sure it is well covered. Leave it to work for 24 hours, until a white powder forms when dry, which absorbs the greasy dirt.
CHARACTERISTICSAND YIELD
Density: 3,8 Lb / 0,2 gl (1.72 kg/l).
Contains tetrachlorethylene and xylene. UN “1897”Do not swallow.Keep out of the reach of children.Harmful by inhalation and in contact with skin.Limited evidence of a carcinogenic effect.Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Avoid contact with eyes.Wear suitable protective clothing and gloves.If swallowed, seek medical advice immediately and show this container or label.Always carry out a small test before full application.
Oil, dirt.Baked clay, facing brickwork, klinker, concrete, natural and synthetic stone, asphalt and stoneware.
APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Emulsion. Opaque greyish liquid. · Suspension of abrasive agent and a mixture
of solvents.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 LPACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED METAL DRUM)
Ref. 20975 6u. - - - - - 8413797209754 - - - - -
11
175
A product designed for effectively cleaning and maintaining porcelain stoneware floors. It brings
out the shine and leaves a pleasant fragrance.
USE This product is a low-residue neutral detergent for washing porcelain stoneware
floors, especially when polished, without the need for rinsing. Its formula makes it sui-
table for those occasions when rapid maintenance of floors with little dirt is required.
CLEANER FOR PORCELAIN STONEWARE
HOW TO USE
TECHNICAL SPECIFICATIONS
12
PREPARATION AND QUANTITY
Dilute 3 to 4 capfuls of products in a bucket with approx. 1,2 / 1,6 gl ( 6/8 litres of water), depending on the amount of dirt on the surface.
FINISH
Go over the surface again with a well squeezed mop.
APPLICATION
Apply with a mop.
CHARACTERISTICSAND YIELD
Ph: 6.7 | Density: 2,2 Lb / 0,2 gl (1.01 kg/l).Yield: diluted: 538-1076 Sq.ft. / 0,2 gl. (50-100 m2/l.)
Do not swallow.Keep out of the reach of children.Always carry out a small test before full application.
MaintenancePorcelain tiles.APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Green light liquid.· Neutral product. · A mixture of a surface-active agent and alcohol.· Contains colouring and perfume.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 L
PACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED POLYURETHANE DRUM)
Ref. 20967 6u. - - - - - 8413797209679 - - - - -
12
176
A detergent-degreasing product for the regular cleaning of marble,
granite and terrazzo floors and coverings.
USE This is a low-residue neutral detergent for washing floors without rinsing. It evapora-
tes quickly, guaranteeing quick, effective cleaning without leaving marks on the clean
surface. It is perfumed with a fresh hint of flowers. Daily cleaning is recommended;
thanks to its composition this product washes without harming the layers of wax.
CLEANER FOR MARBLE, GRANITE AND TERRAZZO
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
Dilute 3 to 4 capfuls of the cleaning product in a bucket with approx. 1,2 / 1,6 gl (6/8 litres of water), depending on the amount of dirt on the surface.
FINISH
Go over the surface with the product again, this time with the mop more tho-roughly squeezed. Leave to dry.
APPLICATION
Spread the product over the surface using a gently squeezed mop.
CHARACTERISTICSAND YIELD
Ph: 6.5 | Density: 2,2 Lb / 0,2 gl (1.01kg/l).Yield: diluted: 538-1076 Sq.ft. / 0,2 gl. (50-100 m2/l.)
Do not swallow.Keep out of the reach of children.Always carry out a small test before full application.
Cement, food, blackening, maintenance, pollution.Natural and synthetic stoneAPPLICABLE ON STAINS TYPES
PRECAUTIONS
· Blue light liquid.· Neutral product. · A mixture of a surface-active agent and alcohol.· Contains colouring and perfume.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 L
PACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED POLYURETHANE DRUM)
Ref. 20959 6u. - - - - - 8413797209594 - - - - -
13
177
This product is for removing stains from marble, granite or terrazzo surfaces. It is highly effective
on difficult stains caused by: coffee, wine, soft drinks, oil, juices, and more...
USE Effectively removes stains that have penetrated the material and which would be
difficult to remove using normal maintenance products, due to the delicate nature of
the materials.
STAIN REMOVER FOR MARBLE, GRANITE AND TERRAZZO
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
The surface should first be washed with water. Apply the product without diluting.
FINISH
Thoroughly rinse with water to remo-ve any remains of the product. Since many foodstuffs are slightly acidic and therefore may harm the marble polish, for a perfect finish, shine up the surface again using MARBLE, GRANITE AND TERRAZZO POLISHER.
APPLICATION
Apply the product to the surface so that it completely covers the stain. Leave to work for 10 minutes and then clean using a soft RUBINET® sponge. Apply more product to the stain and leave for 30 minutes. Should there still be traces of the stain left, repeat the operation.
CHARACTERISTICSAND YIELD
Ph: 12.5 | Density: 2,3 Lb / 0,2 gl. (1,05 kg/l).
Contains hydroxide sodium and hypochlorite sodium. UN “1719”.Do not swallow. Keep locked up and out of the reach of children. Contact with acids liberates toxic gas. Causes burns. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of water and seek medical advice.
Wear suitable protective clothing, gloves and eye/face protection.In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).Do not mix with other products, may liberate toxic gas.Always carry out a small test before full application.
Oil, dirt, glue, coffee, fruit juices, food, lemon, vinegar,rust, urine, vomit, dirty joints, plaster.
Natural and calcareous stone, slate, marble, granite, terrazzo,and porcelain tiles.
APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Alkaline transparent liquid. · A mixture of a hydroxide, surface-active agents
and perfume.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 LPACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED POLYURETHANE DRUM)
Ref. 20963 6u. - - - - - 8413797209631 - - - - -
14
178
This is a solvent-based paint-stripping product, especially for use in removing polyurethane and other
difficult coatings from façades, stone, cement, marble, metal, and more.
USE This product is suitable for treating paint stains on any surface, as its viscosity means it
remains in contact with paint even on vertical surfaces.
It also effectively removes rubber stuck to carpets and deteriorated impact adhesive from
mosaic, terrazzo, stoneware, and similar.
An excellent finishing treatment stripper. (sealers, waxing,...)
PAINT REMOVER
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
Apply directly to dry surface without diluting.
FINISH
Rinse with plenty of water, and scrub with a soft RUBINET® sponge, or pres-surised water, especially on porous sur-faces.
APPLICATION
Recommended temperature 5 to 35º C. Leave to work for 10 minutes. Remove the paint using a spatula. If the paint is particularly old, clean first with UNIVERSAL CLEANER, leave to dry and then apply the PAINT REMOVER.
CHARACTERISTICSAND YIELD
Density: 2,6 Lb / 0,2 gl. (1.19 kg/l).Yield: 11-32 Sq.ft. / 0,2 gl. 1-3 m2/l (undiluted).
Paint, Varnish, marker pen, glue, sealer-waterproofing, waxes.Baked clay, mosaic, porcelain tiles, facing brickwork, klinker, concrete, marble, granite, terrazzo, natural stone, calcareous stone, slate, and stoneware.
APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Very light transparent liquid with a distinctive odour.
· A mixture of solvent, inorganic acid and surfa-ce-active agents.
· It may be removed using water.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 LPACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED METAL DRUM)
Ref. 20955 6u. - - - - - 8413797209556 - - - - -
Contains benzyl alcohol.Do not swallow.Keep out of the reach of children.Harmful by inhalation and if swallowed.Irritating to eyes and skin.Keep away from food, drink and animal feedingstuffs.Avoid contact with eyes.In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
To clean the floor and all objects contaminated by this material, use sepiolite.If swallowed, seek medical advice immediately and show this container or label.Dispose of this material and its container to hazar-dous or special waste collection point.
20
179
This product is suitable for quickly and effectively cleaning stains caused by tar, oils and petro-
leum-based products from walls, flooring and coverings with a low porosity.
USE It effectively cleans stains caused by petroleum-based products from any type of sur-
face, including materials as delicate as natural stone. It does not harm paint, rubber or
joints. It dries rapidly without leaving residues.
MINERAL FAT CLEANER
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
The surface should be dry and at a temperature below 50º C. Any incrus-ted tar should first be removed using a spatula. Use undiluted to treat the stains described above.
FINISH
Rinse with plenty of water and a soft or abrasive RUBINET® sponge, or pres-surised water. For deep stains, use CLEANER FOR RECENT STAINS.
APPLICATION
Apply directly. Leave to work for 2 to 3 minutes.
CHARACTERISTICSAND YIELD
Density: 2,0 Lb / 0,2 gl. (0.885 kg/l).Yield: Undiluted: 11-32 Sq.ft. / 0,2 gl. (1-3 m2/l).
Oil, dirt, tar, tire rubber.Baked clay, mosaic, porcelain tiles, facing brickwork, klinker, concrete, marble, granite, terrazzo, natural stone, calcareous stone, slate, and stoneware.
APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Bluish transparent liquid with a distinctive odour.
· A mixture of aromatic solvents and surface-active agents.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 LPACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED METAL DRUM)
Ref. 20935 6u. - - - - - 8413797209358 - - - - -
Contains Naphtha aromatique. UN “3295”Do not swallow. Keep out of the reach of children.Irritating to respiratory system. Risk of serious damage to eyes. Harmful: may cause lung damage if swallowed. Repeated exposure may cause skin dryness or cracking.Vapours may cause drowsiness and dizziness.Do not breathe vapours.Avoid contact with skin.Flammable. In case of fire, use sand, chemical pow-der or foam. Never use water.Toxic to aquatic organisms, may cause long-term
adverse effects in the aquatic environment.Use appropriate container to avoid environmental contamination.This material and its container must be disposed of as hazardous waste.Avoid release to the environment. Refer to special instructions/safety data sheets.If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label.Always carry out a small test before full application.
21
180
This product is suitable for preventing grout mortar from sticking to cladding, flooring, rustic
stoneware or similar surfaces.
USE The protective film created by the product does not alter the appearance of the
flooring and facilitates the removal of incrusted cement. It prevents dirt sticking to
surfaces while being laid, which would be difficult to remove later on.
Simply cleaning with UNIVERSAL CLEANER removes the protective film and any
remaining of dirt.
CEMENT NON STICK PRODUCT
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
Use directly without diluting.
FINISH
Product cannot be removed using water. When the grout mortar is dry, clean using STONE CLEANER for a better finish, scrubbing with a RUBINET® abra-sive sponge or mixed sponge. Rinse with water.
APPLICATION
Apply a film directly, before filling in joints, making sure the liquid does not enter the joints. Wait 30 minutes before applying the grout mortar.
CHARACTERISTICSAND YIELD
Ph: solution at 16 %. Ph 9.5 Density: 2,3 Lb / 0,2 gl. (1.03 kg/l).Yield: 65-108 Sq.ft. / 0,2 gl. (6-10 m2/l).
Do not swallow.Keep out of the reach of children.Always carry out a small test before full application.
Grout protection.Baked clay, mosaic, facing brickwork, klinker, concrete,slate and stoneware.
APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Whitish emulsion with a distinctive odour.· A mixture of a polymers and surface-active
agents in water.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 L
PACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED POLYURETHANE DRUM)
Ref. 20930 6u. - - - - - 8413797209303 - - - - -
30
181
This product is for waterproofing exteriors of all kinds of porous materials, such as: concrete,
brick, stone and tiles. It prevents dirt penetrating the pores, thereby making cleaning easier.
USE The treated surfaces can be cleaned with normal detergent or even pressurised
water. It forms a fully waterproof seamless elastic film that protects surfaces from
external dirt and moisture. Its composition gives good results in applications exposed
to sunlight, weathering and wear. It does not change the appearance of the material.
SEALER - EXTERIORWATERPROOFING PRODUCT
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
Use on clean dry floors. Apply a thin layer directly, without diluting. Leave to dry for 4 or 5 hours before applying a second layer.
FINISH
Several even layers may be applied, depending on the porosity of the mate-rial. The product cannot be removed using water.
APPLICATION
Use a brush, RUBINET® sprayer, or soft RUBINET® sponge, depending on the type of surface.
CHARACTERISTICSAND YIELD
Density: 1,9 Lb / 0,2 gl. (0.87 kg/l).Yield: undiluted: 86-129 Sq.ft. / 0,2 gl. (8-12 m2/l).
Do not swallow.UN “1123”Keep locked up and out of the reach of children.Repeated exposure may cause skin dryness or cracking.Vapours may cause drowsiness and dizziness.Do not breathe vapour.
Flammable.Avoid contact with skin and eyes.If swallowed, seek medical advice immediately and show this container or labelAlways carry out a small test before full application.
Waterproofing.Baked clay, mosaic, stoneware, facing brickwork, klinker,concrete, natural and synthetic stone and sandstone.
APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Light transparent liquid, a mixture of aromatic polymers and acrylic polymer.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 L
PACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED METAL DRUM)
Ref. 20940 6u. 20941 3u. - - - - 8413797209402 8413797209419 - - - -
31
182
Non-silicone waterproofing product which ensures good protection against a wide variety of stains (such
as oil, water, grease and wine) on rustic flooring, baked clay, rustic stoneware, marble, and stone.
USE Facilitates the removal of stains, as it prevents dirt from penetrating pores on the
surface, which would make later cleaning more difficult.
Particularly suitable for kitchens, bathrooms, restaurants and covered terraces. It also
facilitates the removal of incrusted cement.
Do not apply on porcelain tiles or any other type of glazed surface.
SEALER – WATERPROOFINGFOR INDOOR USE
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
Apply undiluted on clean and dry floors.
FINISH
Do not apply a further coat or step on the affected areas for 4 hours after application. The product cannot be removed using water.
APPLICATION
Do not apply directly. Use a receptacle and apply with a soft RUBINET® sponge.
CHARACTERISTICSAND YIELD
Ph: 8.0-9.0Density: 2,2 Lb / 0,2 gl. (1.014 kg/l.)Yield: undiluted: 86-129 Sq.ft. / 0,2 gl. (8-12 m2/l).
Do not swallow.Keep out of the reach of children.Always carry out a small test beforefull application.
Waterproofing.Baked clay, mosaic, slate, synthetic stone and calcareous stone.APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Light ivory coloured opaque liquid with a dis-tinctive odour.
· A mixture of polymers and surface-active agents in water.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 LPACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED POLYURETHANE DRUM)
200 L Ref. 20945 6u. - - - - - 8413797209457 - - - - -
32
183
A long-lasting self-shining polish, excellent resistance to wear and with an optimum shine.
USE This product is formulated to give a perfect wax finish to non-porous ceramics. Its
wax, polymer and resin-based composition guarantees a perfect application, with
excellent resistance to water and detergents.
NON-POROUS SURFACE WAX
HOW TO USE
PREPARATION AND QUANTITY
For the first application, use the product directly without diluting.For later maintenance, use the diluted product, adding 4 or 5 capfuls of pro-duct to a bucket of water 1,2 to 1,6 gl. (6 to 8 litres).
FINISH
After the first application, leave to dry for approximately 4 hours. A second layer is not necessary.The product cannot be removed using water.
APPLICATION
For the first application, apply the pro-duct evenly using a RUBINET® sponge, a mop, or soft cloth on a clean floor.For later maintenance, apply the diluted product using a mop or the Rubilim machine at a low speed.
TECHNICAL SPECIFICATIONS
CHARACTERISTICSAND YIELD
Ph: 8.0-9.0Density: 2,2 Lb / 0,2 gl. (1.014 kg/l.).Yield: undiluted: 107-193 Sq.ft. / 0,2 gl. (10-18 m2/l.) diluted with water, 4 or 5 caps. in 6 to 8 litres of water: 538-1076 Sq.ft. / 0,2 gl. 1,2 to 1,6 gl. (50-100 m2/l).
Do not swallow.Keep out of the reach of children.Always carry out a small test beforefull application.
Wax.Slate, marble, granite and terrazzo.APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Acrylic emulsion for floors, made of waxes and surface-active agents in water.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 LPACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED POLYURETHANE DRUM)
Ref. 20985 6u. - - - - - 8413797209853 - - - - -
33
184
A long-lasting self-shining polish, with excellent resistance to wear and an optimum shine. Gives quality protection to flooring, as it prevents dirt entering the material, thereby facilitating general cleaning.
USE The wax, resin and natural oil-based product penetrates deep into the pores of baked
clay, rustic, or porous stoneware floors. It brings out the natural colour of the floor, giving it a silky shine that can be polished, and prevents slipping.
WAXES POROUS SURFACE: 1ST APPLICATION
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
Use undiluted on a thoroughly clean and dry floor.
FINISH
Manual: leave to dry for approximately two hours and polish with a cloth.With RUBILIM: leave to dry for approxi-mately two hours and shine with a natural-fibre brush (Ref. 60959 for model 40 NS/NDS and Ref. 60979 for model 50 NS/NDS). If required, a second layer may be applied after 8 hours. For maintenance, only POROUS SURFACE WAX: MAINTENANCE is required, diluted in the washing water.
APPLICATION
Manual: Apply the product evenly using circular movements with a cloth or ball of cotton-wool.With RUBILIM: Apply the product with a very soft sponge (Ref. 60958 for model 40 NS/NDS and Ref. 60978 for model 50 NS/NDS).
CHARACTERISTICSAND YIELD
Yield: 65-108 Sq.ft. / 0,2 gl. (6-10 m2/l.)
Wax.Baked clay, mosaic, facing brickwork, klinker and concrete.APPLICABLE ON STAINS TYPES
PRECAUTIONS
· A solvent-based wax paste, made of a mixture of waxes and paraffin with aromatic solvent.
· Contains hydrodesulphurised heavy naphtha (petroleum).
0,2 gl - 1 L 1,1 gl - 5 L 20 L 10 gl - 50 L 100 L 200 LPACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED METAL DRUM)
Ref. 20980 6u. 20981 3u. - - - - 8413797209808 8413797209815 - - - -
Contains Naphtha aromatique. UN 3295Do not swallow. Keep out of the reach of children.Harmful: may cause lung damage if swallowed.Repeated exposure may cause skin dryness or cracking. Vapours may cause drowsiness and dizziness. Do not breathe vapours. Avoid contact with skin.Flammable. In case of fire, use sand, chemical powder or foam. Never use water.Toxic to aquatic organisms, may cause long-term
adverse effects in the aquatic environment.Use appropriate container to avoid environmen-tal contamination.This material and its container must be disposed of as hazardous waste.If swallowed, do not induce vomiting: seek medical advice immediately and show this con-tainer or label.Always carry out a small test before full appli-cation.
34
185
Water and detergent-resistant waxy emulsion. Specially formulated to protect, shine, and maintain sto-
neware and baked clay flooring, previously treated with WAXES POROUS SURFACE: 1ST APPLICATION.
USE For perfect maintenance of floors waxed with WAXES POROUS SURFACE: 1ST
APPLICATION. Applicable to all types of porous ceramic. Its wax, polymer and resin-
based composition guarantees a perfect application, with excellent resistance to
water and detergents.
WAXES POROUS SURFACE: MAINTENANCE
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
Use 3 or 4 capfuls of product diluted in a bucket of water.
FINISH
Leave to dry normally.
APPLICATION
Apply with a mop.
CHARACTERISTICSAND YIELD
Ph: 8.0-9.0Density: 2,2 Lb / 0,2 gl. (1.00 kg/l.)Yield: 40-60 m2/l diluted in water: 1957-2935 Sq.ft. / 0,2 gl.
Do not swallow.Keep out of the reach of children.Always carry out a small test beforefull application.
Wax.Baked clay, mosaic, facing brickwork, klinker and concrete.APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Waxy emulsion, made of waxes and surface-active agents in water. The product cannot be removed using water.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 LPACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED POLYURETHANE DRUM)
Ref. 20982 6u. - - - - - 8413797209822 - - - - -
35
186
This product is for protecting marble, granite, or terrazzo surfaces from all kinds of stains.
Colourless and easy to apply, it does not change the original appearance of the material.
It provides protection and good resistance to wear.
USE This product is specially designed to protect surfaces from water, dust, and dirt.
It forms a fully waterproof seamless elastic film that protects surfaces from external dirt and
moisture. The treated surfaces can be cleaned with normal detergent or even pressurised water.
STAIN-RESISTANT PROTECTOR FORMARBLE, GRANITE AND TERRAZZO
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
Use without diluting, on clean and dry surfaces.
FINISH
Leave to dry for 2 hours and then scrub. If required, a second layer may be applied, which should also be scrubbed 2 hours after application.
APPLICATION
Apply to the surface using a brush well impregnated with the product.
CHARACTERISTICSAND YIELD
Density: 1,9 Lb / 0,2 gl. (0.87 kg/l).Yield: undiluted: 108-129 Sq.ft. / 0,2 gl. (10-12 m2/l.)
Contains white spirit. UN 3295.Do not swallow. Keep out of the reach of children.Harmful: may cause lung damage if swallowed.Repeated exposure may cause skin dryness or cracking. Do not breathe vapours.Avoid contact with skin.
Flammable. In case of fire, use sand, chemical pow-der or foam. Never use water.If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label.Always carry out a small test before full application.
Waterproofing.Marble, granite, terrazzo, and natural stone.APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Light, pale yellow transparent liquid. · A mixture of synthetic resins and an aromatic
solvent.· The product cannot be removed using water.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 LPACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED METAL DRUM)
Ref. 20964 6u. - - - - - 8413797209648 - - - - -
36
187
This product is formulated for polishing and protecting marble, granite, or terrazzo surfaces from
all kinds of stains while maintaining the original appearance of the material. It is particularly
useful for polished floors, restoring the shine on natural stone flooring that has become worn
through ageing and use. It is also effective for waterproofing and bringing out the beauty in mar-
ble, granite, or terrazzo surfaces.
USE This is a waxy emulsion that protects and shines marble, conglomerate marble, granite and
terrazzo. It creates a wax film that ensures effective and lasting protection and an exce-
llent shine. It is washable and may re-polished several times. It is easy to apply and polish.
POLISHER FOR MARBLE, GRANITE AND TERRAZZO
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
Thoroughly clean the areas to be polis-hed and leave to dry.Maintenance: Apply diluted, adding 3 to 4 capfuls of product to a bucket of water 1,2 to 1,6 gl. (6 to 8 litres).
FINISH
Leave to dry for 4 hours. To increase the shine, rub with a mop or a low revolu-tion polishing machine.
APPLICATION
Apply with a mop.
CHARACTERISTICSAND YIELD
Ph: 5-6.5Density: 2,1 Lb / 0,2 gl. (0.973 kg/l.)Yield: Diluted: Surface maintenance 538-1076 Sq.ft. / 0,2 gl. (50 - 100 m2 /l).
Do not swallow.Keep out of the reach of children.Always carry out a small test before full application.
WaxMarble, granite and terrazzo.APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Opaque white liquid. Emulsion of waxes and surface-active agents in water.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 LPACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED POLYURETHANE DRUM)
Ref. 20961 6u. - - - - - 8413797209617 - - - - -
37
188
This product is used for quickly, easily and efficiently whitening joints between tiles on floors and
kitchen and bathroom walls.
USE With maximum adhering power, it whitens the joints easily and prevents blackening
from mildew. It also restores discoloured joints.
JOINT WHITENER
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
Shake before application. Apply the pro-duct without diluting, on clean and dry surfaces.
FINISH
Leave to dry for 30 minutes and remove any remaining product making circular movements with a damp cloth.
APPLICATION
Place the container over the joint, pres-sing down with the sponge in order to control and spread the product flow.
CHARACTERISTICS AND YIELD
Ph: 7.0 | Density: 2,4 Lb / 0,2 gl. (1.08 kg/l.) Yield: 1312-1968 linear ft. (400 - 600 linear m.)
Do not swallow.Keep out of the reach of children.Always carry out a small test beforefull application.
Dirty Joints.Glazed ceramic with white jointAPPLICABLE ON STAINS TYPES
PRECAUTIONS
· Opaque white viscous liquid. · Mixture of resins, minerals, and surface-active
agents in water.
250 ML 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 LPACKAGING FOR SALE TO PUBLIC ENVASES INDUSTRIALES A GRANEL (POLIETILENO HOMOLOGADO)
Ref. 20966 15u. - - - - - 8413797209662 - - - - -
38
189
This product is for crystallising marble, terrazzo and hydraulic mosaic. It can also be used for the
maintenance of already crystallised surfaces.
USE It gives flooring an intense shine that does not show footprints. It may be used for
polishing or crystallising all types of natural stone. It should be applied using a rotating
cleaning machine, as this provides the appropriate temperature conditions for the che-
mical reaction that takes place between the chemical product and the flooring material.
CRYSTALLISER
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
Apply the product directly without diluting.
FINISH
No special finish treatment is required.
APPLICATION
Pour approximately 4-5 capfuls of crystalli-ser on the surface to be treated. Place the crystallising machine and the steel wool disk in such a position as to spread the product over the floor in areas of approxi-mately 11 or 22 Sq.ft (1 or 2 m2). Leave the machine working until the required degree of shine is obtained.
CHARACTERISTICS AND YIELD
Ph: 2.0 | Density:2,4 Lb / 0,2 gl. (1.08 kg/l.) Yield: 355 - 1076 Sq.ft. / 0,2 gl. (33-100m2/l).
Contains Magnesium Fluosilicate.UN 3287.Do not swallow.Keep locked up and out of the reach of children..Toxic if swallowed.Keep away from food, drink and animal feedingstuffs.
Avoid contact with skin and eyes.In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).Always carry out a small test before full application.
Crystallisation.Marble, granite, terrazzo and mosaic.APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Light opaque ivory-coloured liquid.· Mixture of mineral wax and a silicate fluoride in water.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 L
PACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED POLYURETHANE DRUM)
Ref. 20987 6u. 20988 3u. 21977 - - - 8413797209877 8413797209884 8413797219777 - - -
39
190
The combination of CLEANER and PROTECTOR provides an effective treatment to clean and protect floors
of baked clay, walls, exposed bricks, concrete etc when they are affected by white salts. It is a treatment sui-
table for all porous floors as, sooner o later, the salts of the material will appear on the surface.
USE The CLEANER will remove the white stains of the salts. Very useful for the treatment
of non-gloss porous surfaces. The subsequent application of the PROTECTOR pre-
vents the salts from coming to the surface. Suitable for all porous surfaces.
ANTI BLOOM KIT
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
The CLEANER can be applied either undiluted or diluted 1:1 in water depen-ding on the concentration of salts.
*The surface must be completely clean and dry before applying the ANTI BLOOM KIT. Attention: In surfaces that have been laid out the salts must be cleaned as they come to the surface. This process can last several months depending on the characteristics of the materials involved. The PROTECTOR must never be used until the surface to be treated is completely free of damp and salts derived of the building process.
FINISH
Pour the PROTECTOR in a clean, meta-llic container. Introduce the roller in the container and thoroughly soak it in the product. Apply on the surface, ensuring that all the areas are well impregnated. Do not step on the surfaces for at least 5 hours. During the application please ensure all adjacent surfaces (i.e.: windows frames, skirting boards etc..) are covered
APPLICATION
The surface to be cleaned must be dry. Apply plenty of CLEANER on the area stained of bloom. Leave it to act between 5 to 10 minutes depending on the stain. Rub with a RUBINET abrasive scouring pad. Rinse with plenty of water while still rubbing. Repeat the procedu-re until all the remains of the product are washed out.
CHARACTERIS-TICS AND YIELD
Ph: between 0 and 1Density: 1,6 Lb / 0,2 gl (0.73kg/l). Yield: 43 - 86 Sq.ft. / 0,2 gl. (4-8 m2/l).
Density: 2,3 Lb / 0,2 gl (1.044kg/l).Yield: 43 - 86 Sq.ft. / 0,2 gl. (4-8 m2/l).
Bloom stains.Baked clay, exposed brick, cement and slate.APPLICABLE ON STAINS TYPES
PRECAUTIONS
· CLEANER, fluid liquid of a pale yellow colour. It’s a diluted mixture of an inorganic and ten-soactive acid.
· PROTECTOR, fluid liquid transparent and colourless. Long chained hydrocarbon.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 LPACKAGING FOR SALE TO PUBLIC ENVASES INDUSTRIALES A GRANEL (BIDóN POLIETILENO/METÁLICO HOMOLOGADO)
Ref. 20970 - - - - - - 8413797209709 - - - - -
CLEANER. The CLEANER is an acid. Do not take orally. Keep out of reach of children.Do not apply on surfaces sensitive to acids. It may bleach dark coloured joints. Avoid contact with metallic surfaces (aluminium, stainless steel, iron). Always carry out a test on a small part of the surface before the application.PROTECTOR. Do not take orally. Keep out of reach of children. Harmful by ingestion. Continued exposure to the product may cause dryness or the appearance of cracks in the skin. Irritant of the eyes and the respiratory tract.
In case of contact with the eyes, rinse them imme-diately with water and go to the doctor. In case of swallowing, do not vomit; go to the doctor immediately and show him the label or the pack.Flammable. Keep away from any sources of ignition. Always carry out a test on a small part of the surface before the application.
40
191
This product is for bringing out and heightening the tone of porous surfaces naturally, without
forming a shiny layer. Its formulation ensures protection with good resistance to wear.
USE It is especially effective on natural stone, klinker and rustic stoneware. Once applied,
the product forms a protective film that protects the surface from dirt and liquids.
The treated surfaces can be cleaned with normal detergent or even pressurised water.
WET LOOK
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
Apply without diluting, on clean and dry surfaces.
FINISH
A further layer of product may be applied on highly porous surfaces.Maintain or restore once a year.
APPLICATION
Apply with a brush, slightly impregnated with the product.
CHARACTERISTICS AND YIELD
Density: 2,0 Lb / 0,2 gl. (0.90 kg/l.)Yield: undiluted: 54-108 Sq.ft. / 0,2 gl. (5-10 m2/l.)
Wet look.Baked clay, mosaic, facing brickwork, klinker, concrete, marble, granite, terrazzo, slate, natural stone and calcareous stone.
APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Transparent colourless liquid.· A mixture of resins and an aromatic hydrocar-
bons. It cannot be removed using water.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 LPACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED METAL DRUM)
Ref. 21900 6u. 21901 3u. - - - - 8413797219005 8413797219012 - - - -
Contains Naphtha aromatique.Do not swallow.Keep out of the reach of children.Flammable.Irritating to respiratory system.Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.Harmful: may cause lung damage if swallowed.Repeated exposure may cause skin dryness or cracking.Vapours may cause drowsiness and dizziness.Do not breathe vapours.
Avoid contact with skin.In case of fire, use sand, chemical powder or foam. Never use water.Use appropriate container to avoid environmental contamination.This material and its container must be disposed of as hazardous waste.If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label.Always carry out a small test before full application.
41
192
Bioactive, bactericide cleaning product that prevents the appearance of vegetation and fungi. It
may be used as a disinfectant and hygienic germicide in changing rooms, swimming pools.
USE It effectively removes mildew, moss, algae and lichens from building materials such as
natural stone, synthetic stone, exposed bricks and terracotta. It may be used to clean
green deposits in swimming pools and ponds.
MOSS CLEANER
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
Dissolve 2 to 4 capfuls per litre of water. If treating stains, apply without diluting.
FINISH
Rinse and remove with a light brush. If abundant growth is present, then rub with an abrasive RUBINET® sponge befo-re rinsing with water and if necessary repeat the operation.
APPLICATION
Spread the product over the surface using a RUBINET® sponge, brush, or spray and leave to work for 24 hours.
CHARACTERIS-TICS AND YIELD
Ph: 7.5-8.0 | Density: 2,2 Lb / 0,2 gl. (1.00 kg/l.)Yield: undiluted: 258-323 Sq.ft. / 0,2 gl.(2 m2 /l)
MossBaked clay, mosaic, tiles, facing brickwork, exposed bricks, klinker, concrete, marble, granite, terrazzo, natural stone, calcareous stone, slate and stoneware.
APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Colourless transparent liquid, a mixture of cationic surface-active agent in alcohol and water.
Stain treatment: Yield: 22 Sq.ft./ 0,2 gl. (2 m2/l.) Wall treatment: dilute 1:500, equivalent to one spoonful per 1,6-2 gl.(8-10 l.) bucket. To sterilise living spaces: spray the product diluted 1,000 times. (1 ml per litre of water). To clean swimming pools: use 0.1 (0,5 litres) per 100 m3 of capacity, diluted with water. Clean as normal. For swimming pool maintenance: add 0,15 gl. (0.75 litres) per 100 m3 of capacity once a week.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 L
PACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED POLYURETHANE DRUM)
Ref. 20995 6u. - - - - - 8413797209952 - - - - -
Do not swallow. Keep out of the reach of children. Irritating to eyes and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of water.
Wear suitable protecting, gloves and eye/face protectionIf swallowed, seek medical advice immediately and show this container or label.Keep container tightly closed.Always carry out a small test before full application.
50
193
This product is formulated for the protection of porous surface against graffiti and painting.
Applying the product does not change the appearance of the material.
USE A waxy emulsion with excellent protection power for porous surfaces against paint stains.
After application, the product creates a film that ensure effective, lasting protection. It
is not recommended for very shiny surfaces as it may reduce the shine. The protector
should be re-applied once the graffiti has been removed.
ANTI-GRAFFITI PROTECTOR
HOW TO USE
TECHNICAL SPECIFICATIONS
PREPARATION AND QUANTITY
Apply the product without diluting, on a clean and dry surface.
FINISH
To remove the graffiti, use hot pres-surised water. Once the surface is dry, apply the protector again to ensure its continued effectiveness.If there is no graffiti present, apply the protector once a year, depending on environmental conditions.
APPLICATION
Apply 2 successive layers of abundant product with a brush or spray, without letting it dry between layers.
CHARACTERISTICS AND YIELD
Ph: 8.0 | Density: 2,2 Lb / 0,2 gl. (1.004 kg/l.)Yield: 323-431 Sqft. / 0,2 gl. (30-40 m2 /l.)
Do not swallow.Keep out of the reach of children.Always carry out a small test beforefull application.
Waterproofing, paint, varnish, marker pen.Baked clay, mosaic, porcelain tiles, facing brickwork, klinker, concrete, marble, granite, terrazzo, natural stone and calcareous stone.
APPLICABLE ON STAINS TYPES
PRECAUTIONS
· Opaque white liquid. · Emulsion of montanic waxes and a polymer.
Biodegradable.
0,2 gl - 1 L 1,1 gl - 5 L 5 gl - 25 L 10 gl - 50 L 100 L 200 L
PACKAGING FOR SALE TO PUBLIC INDUSTRIAL AND WHOLESALE PACKAGING (STANDARDISED POLYURETHANE DRUM)
Ref. 21902 6u. - - - - - 8413797219029 - - - - -
60
194
Treatment for stains Waterproofing treatment Consult your local RUBI® distributor
The colours and numbers in this table correspond to the colours and number on the packaging.
The effectiveness of these products is best on surfaces that have not received chemical treatment before using RUBINET®
Oil, dirta
Machinery or motor oil
Bake
d C
lay
Mos
aic
Porc
elai
n
Faci
ng B
rick
wor
k
Klin
ker,
horm
igón
Mar
ble
terr
azzo
Gra
nite
Nat
ural
sto
ne,
calc
areo
us s
tone
Slat
e
Ston
ewar
e
Met
als
Tar
Cement
Glue, coffee, fruit juices
Food
Bloom
Blackening
Lemon, vinegar
Maintenance, pollution
Moss
Rust, urine, vomit...
Paint, Varnish, Marker pen, glue...
Dirty joints
Tire rubber
Plaster
Crystallisation
Wax
Waterproofing
Wet look
Grout protection
GUIDE TO PRODUCTS AND APPLICATIONS
195
196
SUPERPRO SPONGES• PLUS models have cuts for increased drag on the dirt.• Ref. 20905 and 20906 available in Palbox.
REF
RUBINET SUPERPRO sponge 20905 24 7 7/8x5 1/8x2 3/4”20x13x7 cm 1 2
RUBINET SUPERPRO sponge PLUS 20917 24 7 7/8x5 1/8x2 3/4”20x13x7 cm 1 2
SWEEPEX SUPERPRO sponge 20928 32 7 3/32x3 15/16x2 3/4”18x10x7 cm 3 3
SWEEPEX SUPERPRO sponge PLUS 20932 32 7 3/32x3 15/16x2 3/4”18x10x7 cm 3 3
MIXED RUBINET SUPERPRO sponge 20906 24 7 7/8x5 1/8x2 3/4”20x13x7 cm 4 2
MIXED RUBINET SUPERPRO sponge PLUS 20918 24 7 7/8x5 1/8x2 3/4”20x13x7 cm 4 2
MIXED SWEEPEX SUPERPRO sponge special for joints 20992 32 7 3/32x3 15/16x2 3/4”18x10x7 cm 4 3
EPOXI CELLULOSE SUPERPRO sponge 22928 12 6 11/16x3 15/16x1 9/16”17x10x4 cm 4 4
MIXED EPOXI CELLULOSE SUPERPRO sponge 22929 10 6 11/16x3 15/16x1 31/32”17x10x5 cm 4 4
PRO SPONGES• Polyurethane sponges.• HIDRO model is highly absorbent.
REF
STANDARD PRO sponge 24966 24 6 11/16x3 15/16x2 3/4”17x10x7 cm 2 1
High absorption HIDRO PRO sponge 24967 24 6 11/16x3 15/16x2 3/4”17x10x7 cm 3 3
197
HANDLE FOR INTERCHANGEABLE SPONGES AND FOAMS• Adaptable to 12” x 5 11/32” (30 x 13.5 cm.)• and 13 13/32” x 6 3/4” (34 x 17 cm.) SUPERPRO sponges and foam replacements.
REF
Handle for interchangeable sponges and foams 22912 12
REPLAC. SUPERPRO SPONGES 12” X 5 11/32” (30X13,5CM)• Float sponges for cleaning and finishing tile and grout jobs. Interchangeable sponges adaptable to the ergonomic handle. ( ref 22912
) and secure attachement to other brands.• Sponges available with different levels of absorption and resistance to abrasion. Comfortable and secure attachement system.• PLUS models have cuts for increased drag on the dirt.
REF
Float with replaceable RUBINET SUPERPRO sponge 22900 10 11 13/16x5 5/16x1 9/16”30x13.5x4 cm 1 2
Float with replaceable SWEEPEX SUPERPRO sponge 22916 10 11 13/16x5 5/16x1 9/16”30x13.5x4 cm 3 3
Replaceable RUBINET SUPERPRO sponge 22910 10 11 13/16x5 5/16x1 9/16”30x13.5x4 cm 1 2
Replaceable RUBINET SUPERPRO sponge PLUS 22918 10 11 13/16x5 5/16x1 9/16”30x13.5x4 cm 1 2
Replaceable ABRASIVE SUPERPRO sponge 22920 10 11 13/16x5 5/16x1 9/16”30x13.5x4 cm 4 2
Replaceable EPOXI CELLULOSE SUPERPRO sponge 22932 10 11 13/16x5 5/16x1 3/16”30x13.5x3 cm 4 4
Replaceable SWEEPEX SUPERPRO sponge 22922 10 11 13/16x5 5/16x1 9/16”30x13.5x4 cm 3 3
Replaceable SWEEPEX SUPERPRO sponge PLUS 22914 10 11 13/16x5 5/16x1 9/16”30x13.5x4 cm 3 3
198
REPLAC. SUPERPRO SPONGES 13 13/32” X 6 3/4” (34X17CM)• Float sponges for cleaning and finishing tile and grout jobs. Interchangeable sponges adaptable to the ergonomic handle. (ref 22912)
and secure attachement to other brands.• Sponges available with different levels of absorption and resistance to abrasion. Comfortable and secure attachement system.• PLUS models have cuts for increased drag on the dirt.
REF
Float with replaceable RUBINET SUPERPRO sponge 22901 10 13 3/8”34X17X5 cm 1 2
Float with replaceable SWEEPEX SUPERPRO sponge 22917 10 13 3/8”34X17X5 cm 3 3
Replaceable RUBINET SUPERPRO sponge 22911 10 13 3/8”34X17X5 cm 1 2
Replaceable RUBINET SUPERPRO sponge PLUS 22919 10 13 3/8”34X17X5 cm 1 2
Replaceable ABRASIVE SUPERPRO sponge 22921 10 13 3/8”34X17X5 cm 4 2
Replaceable EPOXI CELLULOSE SUPERPRO sponge 22933 10 13 3/8”34X17X4 cm 4 4
Replaceable SWEEPEX SUPERPRO sponge 22923 10 13 3/8”34X17X5 cm 3 3
Replaceable SWEEPEX SUPERPRO sponge PLUS 22915 10 13 3/8”34X17X5 cm 3 3
SPONGE FLOAT SUPERPRO• Floats with RUBINET SUPERPRO sponge for grout cleaning and finishing.• PLUS model has cut for increased performance in wiping away dirt.
REF
SpongefloatSUPERPRO 20924 6 11 1/32x7 11/16x31/32”28x19.5x2.5 cm 1 2
SpongefloatSUPERPROPLUS 20908 6 11 1/32x7 11/16x31/32”28x19.5x2.5 cm 1 2
199
SPONGE FLOAT PRO• Floats with high absorption HIDRO PRO sponge for grout cleaning and finishing.• PLUS model has cuts for increased performance in wiping away dirt.
REF
SpongefloatPRO 24974 10 11 1/32x5 1/2x1 3/16”28x14x3 cm 3 3
SpongefloatPROPLUS 24988 10 11 1/32x5 1/2x1 3/16”28x14x3 cm 3 3
SUPERPRO SPONGE WITH BASE FOR TRAY• Reinforced base for large format.• To be used with RUBICLEAN PLUS SUPERPRO tray.• Handle included (Ref.70904).
REF
SWEEPEX SUPERPRO sponge with base for tray 20914 1 13 3/8x6 11/16x1 31/32”34x17x5 cm 3 3
Replacement SWEEPEX SUPERPRO sponge with base for tray 20919 1 13 3/8x6 11/16x1 31/32”34x17x5 cm 3 3
RUBINET | STANDARD SWEEPEX | HIDRO CELLULOSE ABRASIVE
Absorption level
Resistance to abrasion.
SWEEPEX® is a registered trade mark. Know the range of RUBI® grout buckets. (Pag. 204).
200
• Adaptable to 12” x 5 11/32” (30 x 13.5 cm.)• and 13 13/32” x 6 3/4” (34 x 17 cm.) SUPERPRO sponges and foam replacements.
REF
Handle for interchangeable sponges and foams 22912 12
HANDLE FOR INTERCHANGEABLE SPONGES AND FOAMS
• Rubber foam sponges basis for finishing and final cleanings, adaptable to ergonomic handle (Ref. 22912)• Available with different hardness and abrasiveness rubber-foam.
REF
Replacement rubber foam soft big cell SOFT-L SUPERPRO 22924 10 11 13/16x5 5/16x13/32”30x13.5x1 cm
Replacement rubber foam soft medium cell SOFT-M SUPERPRO 22925 10 11 13/16x5 5/16x13/32”30x13.5x1 cm
Replacement rubber foam soft small cell SOFT-S SUPERPRO 22926 10 11 13/16x5 5/16x13/32”30x13.5x1 cm
Replacement rubber foam hard small cell HARD-S SUPERPRO 22927 10 11 13/16x5 5/16x13/32”30x13.5x1 cm
RUBBER FOAM SUPERPRO FLOAT REPLACEMENTS
201
RUBBER FOAM WOODEN HANDLE SUPERPRO FLOATS• For surface finishing and final cleaning.• Ergonomic wooden handle.• Different types of rubber foam and hardness, depending on the type of finish.
REF
RubberfoamsoftbigcellSOFT-LSUPERPROfloat 72975 6 9 27/32x4 11/32x19/32”25x11x1.5 cm
RubberfoamsoftmediumcellSOFT-MSUPERPROfloat 72976 6 9 27/32x4 11/32x19/32”25x11x1.5 cm
RubberfoamsoftsmallcellSOFT-SSUPERPROfloat 72977 6 9 27/32x4 11/32x19/32”25x11x1.5 cm
RubberfoamhardsmallcellHARD-SSUPERPROfloat 72978 6 9 27/32x4 11/32x19/32”25x11x1.5 cm
RUBBER FOAM PLASTIC HANDLE SUPERPRO FLOATS• For surface finishing and final cleaning.• Ergonomic plastic handle.• Different types of rubber foam and hardness, depending on the type of finish.
REF
RubberfoamsoftbigcellSOFT-LSUPERPROfloat 72985 6 9 27/32x4 11/32x19/32”25x11x1.5 cm
RubberfoamsoftmediumcellSOFT-MSUPERPROfloat 72986 6 9 27/32x4 11/32x19/32”25x11x1.5 cm
RubberfoamsoftsmallcellSOFT-SSUPERPROfloat 72987 6 9 27/32x4 11/32x19/32”25x11x1.5 cm
RubberfoamhardsmallcellHARD-SSUPERPROfloat 72988 6 9 27/32x4 11/32x19/32”25x11x1.5 cm
202
RUBBER FOAM PRO FLOAT• For finishing and final cleaning of surfaces.
REF
COARSErubberfoamPROfloat91/2”x43/4”(24x12cm.) 24970 10 9 7/16x4 23/32x25/32”24x12x2 cm
COARSErubberfoamPROfloat111/32”x51/2”(28x14cm.) 24971 10 11 1/32x5 1/2x25/32”28x14x2 cm
FINErubberfoamPROfloat91/2”x43/4”(24x12cm.) 24972 10 9 7/16x4 23/32x25/32”24x12x2 cm
FINErubberfoamPROfloat111/32”x51/2”(28x14cm.) 24973 10 11 1/32x4 23/32x25/32”28x12x2 cm
FLOAT WITH 10” (25 CM.) SUPERPRO PADS• To clean ceramic surfaces and other materials.• Float with three different roughness replaceable pads; soft (red), medium (blue) and hard (brown).• 3 sets of pads: very soft (white), soft (red), medium (blue) and hard (brown)• Available set of 3 pads of different roughness: soft (red), medium (blue) and hard (brown).
REF
10”(25cm.)float+3pads 20900 1 9 27/32x3 15/16x31/32”25x10x2.5 cm
3 pads replacement set - VERY SOFT 20971 1 9 27/32x3 15/16x31/32”25x10x2.5 cm
3 pads replacement set - SOFT 20972 1 9 27/32x3 15/16x31/32”25x10x2.5 cm
3 pads replacement set - MEDIUM 20973 1 9 27/32x3 15/16x31/32”25x10x2.5 cm
3 pads replacement set - HARD 20974 1 9 27/32x3 15/16x31/32”25x10x2.5 cm
3 pads replacement set - SOFT/MEDIUM/HARD 20902 1 9 27/32x3 15/16x31/32”25x10x2.5 cm
203
BASIS WITH HANDLE AND 3 SUPERPRO PADS 15” (38 CM.)• To clean ceramic surfaces and other materials.• Includes wooden handle and set of three pads of different roughness: soft (red), medium (blue) and hard (brown).• Set of 3 replacement pads of different roughness: soft (red), medium (blue) and hard (brown).
REF
15” (38 cm.) basis with handle + 3 pads 20910 1 14 31/32x3 15/16x31/32”38x10x2.5 cm
3 pads replacement set - SOFT/MEDIUM/HARD 20912 1 14 31/32x3 15/16x31/32”38x10x2.5 cm
FELT PRO FLOAT• To clean ceramic surfaces and other materials.
REF
FeltPROfloat 24975 10 9 7/16x4 23/32x13/32”24x12x1 cm
SPRAYER• Indicated to apply RUBINET® products.
REF
Sprayer 0.2 gl. (1 l.) 20990 6
204
• Tray designed for cleaning after grouting ceramic.• Specially designed to drain the SUPERPRO sponge with base (ref. 20914).• Dimensions: 23 5/8” x 15 3/4” x 10 5/8” (60 x 40 x 27 cm.)• Attachable to wheel kit (Ref. 20904) not included.
REF
RUBICLEAN PLUS SUPERPRO tray 20916 1
RUBICLEAN PLUS SUPERPRO wheel kit 20904 1
RUBICLEAN PLUS SUPERPRO
Ref. Accessories
20904 RUBICLEAN PLUS SUPERPRO wheel kit
• Plastic tray, lightweight and high resistance.• Equipped with 3 spiral rollers for further draining.• Includes wheels and carrying handle.• Capacity: 5.3 gl. (24 l.)• Useful capacity: 2.2 gl. (10 l.)• Dimensions: 20 7/8” x 11 1/32” x 14 9/16” (53 x 28 x 37 cm.)• Supplied assembled and in 1 unit box.
REF
RUBICLEAN TRIPLE SUPERPRO tray 21995 1
RUBICLEAN TRIPLE SUPERPRO
205
• Plastic tray, light and heavy duty, with two squeeze rollers and separation-decantation system of sewage.• Includes wheels and carrying handle.• Capacity: 5.3 gl. (24 l.)• Useful capacity: 4.2 gl. (19 l.)• Dimensions: 20 1/2” x 10 5/8” x 12” (52 x 27 x 30 cm.)• Supplied assembled and in 1 unit case.• Available in Palbox of 10 units (Ref. 69964).
REF
RUBICLEAN SUPERPRO tray 21998 1
RUBICLEAN SUPERPRO
• Plastic tray with two squeeze rollers.• Wheels built into the base.• Capacity: 5.3 gl. (24 l.)• Useful capacity: 3.7 gl. (17 l.)• Dimensions: 20 1/2” x 10 5/8” x 10 1/4” (52 x 27 x 26 cm.)• Supplied assembled and in 1 unit case.• Available in Palbox of 12 units (Ref. 69948)
REF
RUBICLEAN PRO tray 25949 1
RUBICLEAN PRO
206
• Consisting of: • RUBICLEAN SUPERPRO tray (Ref. 21998)• Sponge float SUPERPRO PLUS (Ref. 20908)• Latex gloves (Ref. 20907)
REF
RUBICLEAN SUPERPRO 1 set 69914 1
RUBICLEAN SUPERPRO 1 SET
• Consisting of: • RUBICLEAN SUPERPRO tray (Ref. 21998)• Sponge float SUPERPRO (Ref. 20924)• Termoflex rubber grout float SUPERPRO (Ref. 65976)
REF
RUBICLEAN SUPERPRO 2 set 69915 1
RUBICLEAN SUPERPRO 2 SET
• Consisting of:• RUBICLEAN PRO tray (Ref. 25949)• Sponge float PRO (Ref. 24974)• Grout float PRO 11”x5”x13/32” (28x14x1cm) (Ref. 24969)
REF
RUBICLEAN PRO 1 set 68902 1
RUBICLEAN PRO 1 SET
• Consisting of:• RUBICLEAN PRO tray (Ref. 25949)• Float with replaceable SWEEPEX SUPERPRO sponge (Ref. 22916)• Rubber grout float SUPERPRO (Ref. 65971)• 45º Notched trowel 11” (28 cm) 13/32”x13/32” (10x10) (Ref. 75948)
REF
RUBICLEAN PRO 2 set 69949 1
RUBICLEAN PRO 2 SET
207
SPOMATIC-250Forcleaningandfinishinggrouting.
• Electric cleaner with high-performance pick-up sponge.• For cleaning and finishing grouting.• Drained and sponge cleaning with adjustable pressure.• Adjustable water flow through separate pump.• It incorporates a new system of self-regulated pressure mangle, with 2 working positions.• Maximum cleaning width from 17” (43 cm.).• Easy operation and foldable handle for an easy transport.• Sponge (Ref. 62950) included.• Electric cord; 33 ft. (10 m.)
SPOMATIC-250 1 2 370 W 84 Lb 38 kg
SPOMATIC-250Ref. 62900 62901 62903 62906 62905 62904
Voltage 230V / 50Hz. 230V / 50Hz. UK 240V / 50Hz. AUST 220V / 60Hz. 120V / 50Hz. UK 120V / 60Hz. A
Cleansanddefinesinonetry.
0,5 cv/hp
208
• SPOMATIC-250 replacement sponge
REF
Replacement SPOMATIC-250 sponge 62950 1
SPOMATIC-250 SPONGE
• Replacement high performance sponge for SPOMATIC-250.• Life long composition.
REF
Replacement SPOMATIC-250 sponge PLUS 62951 1
SPOMATIC-250 SPONGE PLUS
• Replacement sponge SPOMATIC-250 special for EPOXI grout.
REF
Replacement SPOMATIC-250 sponge EPOXI 62952 1
SPOMATIC-250 EPOXI SPONGE
• To avoid foam of determined grouts while using the SPOMATIC-250.
REF
Anti-foam liquid 60310 1
ANTI-FOAM LIQUID
209
RUBILIMCleans, polishes, brightens, grout, crystallizes, and waxing by changing the accessory.
• 2 HP single phase motor• 3 working speeds: 60, 120, 180 r.p.m.• IP54.• Handles high strength aluminum with rubber coating.• With instant soft start and stop, maintains a large performance cleaning, polishing floors and crystallized.• Handlebar locking system.• Rubber wheels placed in external position for stability.• Band incorporates neutral color bumpers to avoid staining the walls.• Electric cord; 33 ft. (10 m.).• Includes Polypropylene brush (Ref. 60970) and liquid tank of 2.9 gl. (13 l.).
REF
RUBILIM-40-NDS 62968 1 2 1500 W 230V/50-60Hz 60-120-180 88 Lb 40 kg
RUBILIM-50-NDS 62969 1 2 1500 W 230V/50-60Hz 60-120-180 99 Lb 45 kg
Powerful and versatile
2 cv/hp
210
ROTARY CLEANERS FOR FLOORS•Rotatingmachineswithawiderangeofaccessoriesforcleaningandpavingtreatments
• General cleaning
REF
Polypropylene brush 16” (40 cm.) 60950 1
Polypropylene brush 20” (50 cm.) 60970 1
Polypropylene brush
• For cleaning delicate surfaces and shining of waxes.
REF
Naturalfibrebrush16”(40cm.) 60959 1
Naturalfibrebrush20”(50cm.) 60979 1
Naturalfibrebrush
• Special carborundum & polyamide brush for very aggressive cleaning.
REF
Carborundum brush 16” (40 cm.) 61920 1
Carborundum brush 20” (50 cm.) 61921 1
Carborundum brush
• To fill the joints between tiles.• Specially for cement based grout mortars.
REF
Vulkolan grouter 16” (40 cm.) 60951 1
Vulkolan grouter 20” (50 cm.) 60971 1
Vulkolan grouter 16” (40 cm.) spare part 60952 1
Vulkolan grouter 20” (50 cm.) spare part 60972 1
Vulkolan grouter
• Two weights of 28.6 lb. (13 kg.) in total, adaptable to RUBILIM-40-NDS and RUBILIM 50-NDS.
• Necessary to polishing and crystallized.
REF
Weight set for RUBILIM-N 61969 1
Weight set for RUBILIM-N
211
ROTARY CLEANERS FOR FLOORS•Rotatingmachineswithawiderangeofaccessoriesforcleaningandpavingtreatments
• For smoothing and polishing marble, terrazzo and granite.• Best performance 10,750 Sq. ft. (1000 m2) recommended the simultaneous use
of 4 units.• Use with support 60954 or 60974• 60 (green / very abrasive)• 120 (black / abrasive)• 220 (orange/ medium)• 400 (brown / soft)• 800 (white / very soft)
REF
Diamondized strip - grain 60 61902 4
Diamondized strip - grain 120 61903 4
Diamondized strip - grain 220 61904 4
Diamondized strip - grain 400 61905 4
Diamondized strip - grain 800 61906 4
Diamondized strip
• Basis to adapt pads, diamond strips and steel wool.
REF
Pad holder 16” (40 cm.) 60954 1
Pad holder 20” (50 cm.) 60974 1
Pad holder
• For resistant floors and aggressive cleaning
REF
Very abrasive pad 16” (40 cm.) 60955 5
Very abrasive pad 20” (50 cm.) 60975 5
Very abrasive pad
• For standard floors and deep cleaning.
REF
Abrasive pad 16” (40 cm.) 60956 5
Abrasive pad 20” (50 cm.) 60976 5
Abrasive pad
212
ROTARY CLEANERS FOR FLOORS•Rotatingmachineswithawiderangeofaccessoriesforcleaningandpavingtreatments
• To be used in marble and other soft surfaces.
REF
Soft pad 16” (40 cm.) 60957 5
Soft pad 20” (50 cm.) 60977 5
Soft pad
• For wax applying and cleaning delicate floors
REF
Very soft pad 16” (40 cm.) 60958 5
Very soft pad 20” (50 cm.) 60978 5
Very soft pad
• For float finish of morter and concrete pavements.
REF
Metalic disc 20” (50 cm.) 60980 1
Metalic disc
• To crystallize surfaces of natural stone and terrazzo.• No.1 for delicate surfaces.• No. 2 for normal surfaces.• Packaging: Bag of 4 coils of 5.5 lb. (2.5 kg.)• Necessary to use CRYSTALLIZER liquid .
REF
Steel wool nº1 61916 1
Steel wool nº2 61914 1
Steel wool
• Support that allows the setting of 4 stones to polish type “Frankfurt”.
REF
Frankfurt abrasive stone support 16” (40 cm.) 60964 1
Frankfurt abrasive stone support 20” (50 cm.) 60965 1
Frankfurt abrasive stone support
• Dragging support for abrasive discs (mesh or paper) ..
REF
Abrasive paper support 16” (40 cm.) 60960 1
Abrasive paper support
213
PAL BOX AND DISPLAYS•Productdisplayunitsforacorrectplacementofproductatthesellingpoint.
• Contains 20 TILE LEVEL sets (Ref. 02992)• Includes LCD 7 “ with video demonstration.• Dimensions: 23” x 15” x 47” (60 x 40 x 120 cm.)
REF
TILE-LEVEL palbox with screen (20 sets) 02993 1
TILE-LEVEL set
• Contains 160 units HIDRO PRO sponges (ref. 24967).• Dimensions: 23” x 15” x 42” (60 x 40 x 105 cm.).
REF
HIDRO PRO sponge palbox 69979 1
HIDRO PRO sponge
• Contains 135 units of RUBINET SUPERPRO sponges (Ref. 20905).• Dimensions: 23” x 15” x 47” (60 x 40 x 120 cm.).
REF
RUBINET SUPERPRO sponge palbox 69955 1
RUBINET SUPERPRO sponge
• Contains 135 MIXED RUBINET SUPERPRO sponges (Ref. 20906).• Dimensions: 23” x 15” x 47” (60 x 40 x 120 cm.).
REF
MIXED RUBINET SUPERPRO sponge palbox 69957 1
MIXED RUBINET SUPERPRO sponge
• Contains 10 RUBICLEAN SUPERPRO trays (Ref. 21998)• The trays are served NOT assembled.• Dimensions: 22” x 12” x 42” (56 x 31 x 109 cm.).
REF
RUBICLEAN SUPERPRO tray palbox 69964 1
RUBICLEAN SUPERPRO tray
• Contains 10 RUBICLEAN PRO tray (Ref. 25949)• The trays are served NOT assembled.• Dimensions: 22” x 12” x 42” (56 x 31 x 109 cm.).
REF
RUBICLEAN PRO tray palbox 69948 1
RUBICLEAN PRO tray
214
DISPLAYS•DifferentdisplayunitstoshowRUBIproducts,optimisingtothemax.thespaceavailable.
• Trays and racks are optional.
REF
General display 40” (1000 mm.) 90311 1
General display 25” (650 mm.) 90312 1
General display 40” (1000 mm.) tray 90570 1
General display 40” (1000 mm.) rack 90606 1
General display 25” (650 mm.) tray 90571 1
General display 25” (650 mm.) rack 90607 1
General display
• Display with the capacity of 3 manual machines.
REF
Display for manual cutters. 90305 1
Display for manual cutters.
• Desktop display unit with 5 hooks for levels up to 60cm.
REF
Display stand for levels. 90368 1
Display stand for levels.
• Desktop display to keep in sight the different sizes and models of chisels.
REF
Display stand for chisels 90313 1
Display stand for chisels
• Plastic display with 5 levels to have at sight the full range of products RUBINET.
REF
RUBINET column display 24” (600 mm.) 90306 1
RUBINET column display
215
DISPLAYS•DifferentdisplayunitstoshowRUBIproducts,optimisingtothemax.thespaceavailable.
• Exhibitor with several hooks to hold two mixers and different mixing paddles.
REF
Display for mixers 90301 1
Display for mixers
• Display with 3 shelves to display ND series electric machines.
REF
ND electrical wet saws display 90317 1
ND electrical wet saws display
• Desktop display with three hooks for EASY GRES sets and bits of different diameters.
REF
Display stand for EASY FRES drill bits 90176 1
Display stand for EASY FRES drill bits
• Desktop display with six hooks for different diameters of scoring wheels.
REF
Display stand for scoring wheels 90177 1
Display stand for scoring wheels
www.rubi.com
CLUB000000VICTOR SANCHO
BENEFITS: Free extended warranty * Continuous training in laying ceramic Advanced Notification of local Tradeshows & Exhibitions Competitions Newsletters Preferential treatment in the stands RUBI (major exhibitions) Involvement in charity projects (optional) * Check cutter range/model for full details.
* Further information on page 8.
* Mandatory fieldAs a Club RUBI® member, you are giving us your permission to send you information by E-mail. You can access, oppose, change or cancel any data we hold for you by written notice to: Germans Boada, SA, Avda Olimpiades, 89-91. Ind. Can Rosés, 08191 RUBI. Spain.
SIGN UP TOCLUB RUBI®!I joined the Club RUBI®!, “The Club for Tiling and Building Professionals”
*Full Name:................................................................................................................
.....................................................................................................................................
Address:.......................................................................................................................
City:............................................................................................................................
Town:..........................................................................................................................
Country:......................................................................................................................
Postal Code:.............................................................................................................
Nationality:.................................................................................................................
Telephone:.................................................................................................................
Date of birth:............................................................................................................*E-mail:.........................................................................................................................
HOW TO JOIN*:
- Via WEB, en www.rubi.com/clubrubi - FAX, 0034 650 65 01 - E-MAIL, [email protected] - POSTAL APPLICATIONS, to Germans Boada S.A.
216
INDEX BY REFERENCES
217
REF PAG02191 19202192 19402274 15702279 15702390 15402391 15502392 15502393 15502394 15602395 15602396 15602397 15602901 15302902 15302903 15402904 15502905 15502911 15302912 15302921 17402923 15502924 15502925 15602925 17002926 15602926 17002935 18002941 18202945 18302946 15902947 15902948 15902949 15902950 15602951 15602952 15302952 17102953 15402953 17102954 15402955 15402955 17902959 17702961 18802963 17802964 18702965 17202966 18902967 17602972 15302973 15402974 15402975 15402975 17502980 15902981 15902981 18502982 15902982 18602985 18402987 19002988 19002992 15902993 21302995 19304909 8804910 9104911 9104912 9104913 9104914 9104915 9104916 9104917 9104918 86
REF PAG00219 19200292 17400293 18100294 18200295 17300297 19100298 18501945 4001945 4501946 4001946 4501947 4101947 4501948 4101948 4501949 4001950 4001952 4001958 4001958 4501959 4201960 4501961 4101962 4301964 4101965 4301970 4101971 4101974 4401975 4401976 4401977 4401978 4401979 4401991 4201992 4301993 4201994 4301995 4201996 4202000 15302001 15302002 15402003 15502004 15502030 15302031 15302032 15402033 15502036 15402037 15502063 15502064 15502065 15602066 15602123 15702124 15702125 15702126 15702127 15702128 15702129 15702130 15702131 15702132 15702133 15702135 15702173 15702175 15702177 15702179 15702180 15702183 15702186 15702188 157
REF PAG04919 8804920 8804921 8804922 8804923 8804924 8804925 8804926 8804927 8804928 8804929 8804930 8704931 8704932 8704933 8704934 8704937 8704960 9404962 9404963 8604964 9404965 9404966 9404967 9404968 9404970 8604971 8604972 8604973 8604974 8604975 8604976 8604977 8604981 8604987 8604988 8604989 8604990 9404991 9404992 9404993 9404995 9404999 8805900 4805910 4805925 4905931 4905961 8905962 8905963 8905964 8905965 8905966 8905967 8905969 8905972 13305973 6705974 6705975 3905976 9105976 9305978 8905979 8905981 8905982 8905985 16705986 16705987 9105988 9105989 9105990 9105991 9105992 9107935 4710607 125
REF PAG10665 11712905 2712906 2712907 2912908 2912916 3912919 2712920 2912923 4712924 4712968 3512969 3512978 3412979 3412980 3612981 3612985 3612986 3612990 3512991 3512992 3512993 3512995 3412996 3412997 3412998 3413925 3713930 3713962 3313963 3313968 3113969 3113971 3113972 3313973 3313975 3113976 3113977 3113992 3313993 3315970 1615980 1615981 1615984 1616916 1716917 1716940 1516950 1516960 1516970 1517926 1917936 2117949 2117970 2517971 2517974 2517978 2317979 2318940 1318950 1318960 1318980 3919901 13620900 20220902 20220904 20420905 19620906 19620907 16720908 19820910 20320912 20320914 19920916 20420917 196
REF PAG20918 19620919 19920920 17420921 17420924 19820925 17020926 17020928 19620930 18120932 19620935 18020940 18220941 18220945 18320950 17320952 17120953 17120955 17920959 17720961 18820963 17820964 18720965 17220966 18920967 17620970 19120971 20220972 20220973 20220974 20220975 17520980 18520981 18520982 18620985 18420987 19020988 19020990 20320992 19620995 19321900 19221901 19221902 19421977 19021977 19021995 20421998 20522900 19722901 19822910 19722911 19822912 19722912 20022914 19722915 19822916 19722917 19822918 19722919 19822920 19722921 19822922 19722923 19822924 20022925 20022926 20022927 20022928 19622929 19622932 19722933 19824949 9924960 10024961 10024962 100
REF PAG24963 10024964 10024965 10024966 19624967 19624968 12524969 12524970 20224971 20224972 20224973 20224974 19924975 20324988 19925238 4725900 11625901 11625902 11625903 11625905 11625906 11625907 11625910 7525911 7725912 7725913 7725914 7725915 7425916 7425917 7425918 7425925 5225926 5225927 5225934 7725935 7725938 7425940 9925942 9925943 10125944 9925945 5225946 10425948 9925949 20525952 7325954 3825955 3825956 3825957 3825958 3825959 3825963 5225966 6825972 5325973 5325982 5325984 5325989 5325990 5325993 5330882 7530883 7530888 7530923 7830925 7830926 7830928 7830929 7830930 7830931 7830942 7730943 7730945 7730946 77
REF PAG30948 7730949 7730950 7730951 7730955 7830956 7830958 7830959 7830960 7830961 7830962 7830963 7830964 7830972 7630973 7630995 7630996 7630997 7631906 7931909 7931910 7931915 7531952 7531953 7531956 7531957 7531958 7531962 7431963 7431968 7431972 7631973 7631975 7631978 7631980 7431981 7431982 7431983 7432902 7632903 7632908 7632922 7532923 7532926 7532928 7532929 7532940 7432942 7432943 7432948 7432970 7732971 7732972 7732973 7733902 8333905 8333908 8333922 8333925 8333928 8334956 8335518 11935520 11936914 11936916 11937115 12037116 12037118 12037258 12037268 12037279 12037314 12037316 12037318 12037320 120
INDEX BY REFERENCES
218
REF PAG37322 12037418 12137520 12138211 12138311 12238414 12238416 12245305 6745434 6745534 6745910 5545911 5545915 5545916 5545918 5550134 9350900 9250903 8650907 9250909 8750917 9150921 9050929 9350937 9050939 7150944 9250947 9250956 7250957 7250958 7250968 7351911 6851912 6851913 6851915 6751916 6851920 6351922 6351924 6351925 6351930 6351932 6351934 6351935 6351970 6151972 6151974 6151975 6151980 6151982 6151984 6151985 6151990 6151992 6151994 6151995 6154822 6954939 6754940 5754941 5754943 5754948 5754949 5754990 6855802 7755931 5955932 5955933 5955934 5955937 5956137 6956940 6556942 6556944 6556945 65
REF PAG56948 6557940 6857949 6857990 6757991 6758850 6958851 6958852 6958853 6958854 6958856 6958857 6958859 6958860 6960202 10460265 10460310 20860950 21060951 21060952 21060954 21160955 21160956 21160957 21160958 21260959 21060960 21260964 21260965 21260970 21060971 21060972 21060974 21160975 21160976 21160977 21160978 21260979 21060980 21260991 13060992 15260993 15260994 15260995 13060996 11160997 11160998 13061902 21161903 21161904 21161905 21161906 21161914 21261916 21261920 21061921 21061950 9861951 9861954 9861969 21062900 20762901 20762903 20762904 20762905 20762906 20762950 20862951 20862952 20862968 20962969 20965450 12765900 13565903 13665904 134
REF PAG65905 13465907 12965908 13465912 13465913 13465914 13465915 16265919 12765922 4965924 4965925 14165926 14165927 10265928 10265929 10265930 10265931 10365932 10365933 10365934 10365935 12665936 12765937 12765938 12765939 10265940 13365941 13165942 13165943 16565944 13365945 13365946 13365947 12465948 12465949 12465950 10865951 11565952 14165954 12665955 11565957 12965958 10965959 10965960 10865962 12965963 12965965 11565966 11565967 11565968 11565969 11565970 12565971 12565972 12565973 12565975 12565976 12565978 13465979 13165980 14365981 14365982 10865983 10965984 10865985 10865986 10865987 10965988 10965989 10865990 14365991 11565992 11565993 11565994 11565999 115
REF PAG66900 13566904 13566905 13466906 13466907 13466908 13466909 13466910 13466915 14266925 14268902 20669914 20669915 20669933 15269948 21369949 20669955 21369957 21369964 21369979 21370902 12770903 12670904 12770905 12670906 10870909 12870910 12870911 12870912 12870913 12870914 12870915 14070916 14070917 14070918 14070919 14070920 13370921 13370922 14070924 14070925 13170926 13270928 13270929 13270930 4870931 4870932 14070933 13370934 13370940 13070942 13070945 14670946 14670947 14670948 14670949 14670959 14770960 14770961 14770962 14770963 15270964 15270965 14870967 15270968 15270969 15270971 12670975 14871903 12671904 12671922 11171923 11171924 11171925 11171926 111
REF PAG71927 11171928 11171941 12471942 12471943 12471944 12471945 12471946 12471947 12471948 12471949 12471950 12471954 13671956 10371966 10471967 10471969 10471970 14171971 14071972 14071974 12971986 13871987 13871988 13871989 13871990 13871991 13871992 13871993 13871994 13872906 11372907 11372908 11372909 11372910 11372911 11372915 10972916 11072917 11372918 11072919 11372920 15072923 14872931 14072934 10272935 10272936 10272937 10272938 10372940 13072941 13072942 13072944 14672945 14672946 14672947 14672948 14672950 14672951 14672952 14672954 10472960 12972961 12972962 12972963 12772975 20172976 20172977 20172978 20172980 13472985 20172986 20172987 20172988 20173908 128
REF PAG73909 12873910 10373911 12873912 12873913 12873914 12873921 10373922 10273973 10974904 10874905 10874906 10874909 11074910 11074911 11074913 11074914 11074915 11074916 11074936 11374937 11374938 11374940 11374941 11374942 11374943 11374945 10874947 10874948 10874957 11674958 11674959 11674960 11674961 11674963 11674976 11574979 11574980 11374982 11374983 12674984 12674986 12674988 12675012 11975014 11975016 11975416 11975418 11975420 11975900 15075901 15075902 15075903 15075904 15075905 15075913 11975915 11975922 15175923 11475924 11475925 13275928 11775929 11775930 11775931 11775946 11475947 11475948 11475950 11275953 11275955 11275957 11275958 11275959 11275960 112
REF PAG75962 10975965 13675970 11275984 14976808 11976809 11977115 12077116 12077118 12077258 12077268 12077279 12077314 12177316 12177318 12177320 12177322 12177418 12178211 12279050 12180900 16680902 16580903 16580906 16680909 16680912 16680913 16680914 16680918 16580932 13380933 13380936 13180937 13181945 16781946 16781947 16781987 16281989 16481994 16381998 16381999 16482986 13982991 13983942 14183949 6983970 12583971 12583972 12583980 14783981 14783982 14783983 14783991 6983992 12483993 12484948 13784949 13784950 13784951 13790176 21590177 21590301 21590305 21490306 21490311 21490312 21490313 21490317 21590368 21490570 21490571 21490606 21490607 214
SYMBOLOGY AND CERTIFICATIONS
In this catalog to provide reader’s maximum information as clearly as possible, we have used the following symbols.
Note: It is forbidden any reproduction of all or part of this catalog without prior approval of Germans Boada, SA
SYMBOLOGY
SYMBOLOGY OF CERTIFICATIONS SYMBOLOGY OF AWARDS
Units per box
Mobile separator
Cut height
Power
Cut Length
Fixed separator
Units per pallet
Separator power
Repetitive cuts
45º cuts
Base accessory
Angular measuring
Dual reinforced guide
Stainless steel table
INCH/MM. ruler
Tip-up table for mitring
Repetitive cuts
Foldable head
Angular measurement
Wall chaser effect
Folding legs
Adjustable flow Mobile cart
Wet cutting
2 years warranty
2+1 years warranty
Dry cutting2+3 years warranty
European Regulatory Commission TÜV safety rulesRussian legislation Gosstandard
Power supply
Revolutions per minute
Cutting lenght
Diagonal cutting length
Cutting height
Separator power
With carrying case
Net weight without packing
Gross weight
Weight with carrying case
With blade
Outside diameter
Inside diameter
Mitre cutting length
Length Width Height
Wall chaser effect
Tip-up table for mitringWatts
Trowel length
Trowel width
Absorption level (1-4)
Resistance to abrasion (1-4)
Bags per box
Nº tile spacers per bag
Tile spacers for box
Disc segment high
Segment Thickness
Sponge size
Wide notched trowel
Notched Radius Trowel
Notched height trowel
Mixing capacity
Maximum drill length
Max Height of the head
Rod’s head diametre
Maximum cutting thickness - 1 stroke or 2 strokes
INGL.M1: Ref. 91569INGL.RUK: Ref. 91567 INGL.M2: Ref. 91570INGL.RTU: Ref. 91568 INGL.SRT: Ref. 91571
Germans Boada SA and its subsidiaries comply with the Directive 2002/96/EC on waste electrical and/or electronic and Directive 2002/95/EC on the restriction of certain substances in their manufacture, applying the law of each member state according to EEC your specific criteria. (WEEE, WEEE, ECORAEE, etc ...) (RoHS).
* The gross weight of some electrical machines can vary depending on the type of pallet and carton type used in packaging.
** Any manipulation of the machines voids the warranty. The warranty covers defects in manufacturing or assembly in accordance with applicable law.
mm“
kgLb
cv / hp
mm“
219
www.rubi.com
www.rubi.com
CLUB
000000
VICTOR SANCHO
P D
A
ZH
UK
F
USA
GBSA
GERMANS BOADA S.A. MADRIDMarie Curie, 7, edif. B, bajos 728521 Rivas VaciamadridSPAINTel. 34 914 99 48 63Fax. 34 914 99 48 70E-mail: [email protected]
LUSARUBI Lda.E.N.1-Malaposta do CarqueijoApartado 663050-901 MEALHADAPORTUGALTel. 351 231 947 550Fax. 351 231 947 551E-mail: [email protected]
RUBI BENELUX BV.Weidehek, 704824 AS BREDANEDERLANDTel. 31 (0) 76 57 29 200Fax. 31 (0) 76 57 20 190E-mail: [email protected]
RUBI DEUTSCHLAND GmbHMollsfeld 540670 MeerbuschDEUTSCHLANDTel. 49 (0) 21590 814 49 29Fax. 49 (0) 2159 814 49 31E-mail: [email protected]
RUBI FRANCE S.A.R.L.Immeuble Oslo19 Avenue de Norvège91953 LES ULISFRANCETel. 33 1 69 18 17 85Fax. 33 1 69 18 17 89E-mail: [email protected]
SUZHOU RUBI TECHNOLOGIES Co.,Ltd苏州瑞比机电科技有限公司江苏省苏州工业园区娄阳路21号邮政编码 215122电话:86 (0) 512 66 62 61 00传真:86 (0) 512 66 62 61 01E-mail:[email protected]
RUBI MIDDLE EASTGERMANS BOADA S.A.UNITED ARAB EMIRATESTel. (971) 4.329.63.08Fax. (971) 4.329.63.09E-mail: [email protected]
RUBI HELLASE. KOYPEMENO∑ & YIOI A.E.∏APNHΘO∑ 16 & TATOÏOY 100144 52 METAMOPΦΩ∑H - AΘHNAEΛΛAΔATel/THΛ: +302102843907Fax. +302102847354E-mail: [email protected]
RUBI ČESKÁ REPUBLIKA GERMANS BOADA S.A., organizační složkaNa Strži 65/1702140 00 Praha 4, ČESKÁ REPUBLIKATel. +420 257 225 332Fax. +420 257 225 332E-mail: [email protected]
RUBI SUOMIGERMANS BOADA SIVULIIKE SUOMESSA Keilasatama 302150 ESPOO - SUOMI - FINLAND Tel. +358 (0)9 2510 7400Fax.+358 (0)9 2510 7100E-mail: [email protected]
RUBI DE MEXICO, S.A. DE C.V.3ª Cerrada de Minas 139Lomas de Becerra01280 MÉXICO, D.F. - MÉXICO Tel. 5255 5598-6500 / 6875Fax. 5255 5563-4444E-mail: [email protected]
RUBI ROSSIAмоб. +7 903 153 30 46 тел.: +34 936806500 факс: +34 936806501E-mail: [email protected]
RUBI CANADÁTel. 1866 872 7825E-mail: [email protected]
RUBI TÜRKIYEDemir Makine Ticaret Ve Sanayi Ltd. Şti.Emekyemez Mah., Buğulu Sok. No:9a KaraköyIstanbul - Türkiye - TurkeyTel. (212) 237-2224Fax. (212) 237-2252E-mail: [email protected]
RUBI DANMARKROSENKÆRET 18, 2. SAL.2860 SØBORGTEL. +45 4578-2435E-mail: [email protected]
RUBI VENEZUELAGERMANS BOADA S.A.Tel. (58-212) 0416 6105401Tel. (58-212) 0414 3219433Tel./Fax (58) 0212 2722861E-mail: [email protected]
RUBI MAROCIndusmat S.A.R.L1075, Bd. Mohamed VI Rés. Fath ZharMAGASIN: 103 - CasablancaMaroc - MoroccoTel. +212 22.37.80.22Fax. +212 22.97.80.49E-mail: [email protected]
RUBI POLSKA Sp. z o.o.ul. Karczunkowska 4302-871 WarszawaPOLSKATel. +48 (0) 226 44 51 61Fax. +48 (0) 226 44 58 45E-mail: [email protected]
IT GERMANS BOADA S.A.MERCATO ITALIANOPol. Can Rosés, Avda. Olimpíades 89-91P. O. BOX 1408191 RUBI (Barcelona) SPAINE-mail: [email protected]
Número Verde Fax Verde
800 788278 800 788279
RUBI UK LTD.Units 16 & 17, Easter Park, Beam ReachFerry LaneRainham, EssexRM13 9BP - UNITED KINGDOMPhone 44 (0) 1708559609Fax 44 (0) 1708553813E-mail: [email protected]
GERMANS BOADA S.A.Pol. Can Rosés, Avda. Olimpíades 89-91, P.O.BOX 1408191 RUBI (Barcelona) SPAINTel. 34 936 80 65 00 · Fax. 34 936 80 65 01E-mail: [email protected]
GERMANS BOADA S.A. SANTA OLIVARonda de l’albornar, 24-2643710 Santa Oliva(Tarragona) SPAINTel. 34 977 16 90 50Fax. 34 977 16 90 51E-mail: [email protected]
RUBI CHILEGERMANS BOADA S.A.Tel. (56-9) 9 799 9574Tel. (56-9) 5 0071 766E-mail: [email protected]
RUBI TOOLS USA Inc.11190 NW 25th StreetMIAMI, FL 33172 - USAToll Free. 1 305 715 9892Fax. 1 305 715 9898E-mail: [email protected]