2013 nissan altima sedan cm6200/blade-al install · 2015. 12. 9. · 2013 nissan altima sedan...
TRANSCRIPT
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Page
1
2013 Nissan Altima Sedan CM6200/Blade-AL Install
TOOLS AND PARTS 1. Digital Multi-Meter 2. Crimpers 3. Soldering Iron and Solder 4. Panel Removal Tool(s) 5. 10mm socket 6. Phillips Head Screwdriver 7. CM6200 8. ADS Blade-AL 9. (1) Relay and (5) 1A Diodes
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Page
2 2013 Nissan Altima Sedan CM6200/Blade-AL Install
Connections FUNCTION COLOR LOCATION POLARITY 12 VOLTS (40A) Green Backside of driver’s side dash fuse box, white 1 pin plug (+) 12 VOLTS (40A) White BCM, behind instrument cluster, white 15 pin plug, pin 11 (+) (+) IGNITION White BCM, behind instrument cluster, black 40 pin plug, pin 27 (+) (-) IGNITION Green BCM, behind instrument cluster, black 40 pin plug, pin 30 (-) ACCESSORY 1 Red BCM, behind instrument cluster, black 40 pin plug, pin 26 (+) ACCESSORY 2 Pink BCM, behind instrument cluster, black 24 pin plug, pin 9 (+) (+) STARTER Red IPDM under the hood, black 1 pin plug (+) (-) STARTER 1 Brown BCM, behind instrument cluster, black 40 pin plug, pin 22 (-) (-) STARTER 2 Red IPDM under the hood, white 32 pin plug, pin 15 (-) PARKING LIGHTS Red Front of driver’s side fuse box, brown 16 pin plug, pin1 (+) DISARM/UNLOCK Empty OR Tan BCM, behind instrument cluster, green 40 pin plug, pin 34 (-) ARM/LOCK Empty OR Green BCM, behind instrument cluster, green 40 pin plug, pin 19 (-) TRUNK RELEASE Brown BCM, behind instrument cluster, black 40 pin plug, pin 40 (-) DRIVER’S DOOR PIN Brown BCM, behind instrument cluster, gray 24 pin plug, pin 16 (-) PUSH-TO-START (PTS) Red BCM, behind instrument cluster, green 40 pin plug, pin 1 (-) SECURITY LIGHT Green BCM, behind instrument cluster, green 40 pin plug, pin 18 (-) CAN HIGH Blue BCM, behind instrument cluster, black 40 pin plug, pin 20 (DATA) CAN LOW Pink BCM, behind instrument cluster, black 40 pin plug, pin 19 (DATA)
BLADE-AL with DL-NI3
Feature coverage
DATA
IMM
O B
YPAS
S
SECU
RE T
AKEO
VER
DOO
R ST
AT O
UTP
UT
HOO
D ST
AT O
UTP
UT*
TRU
NK
STAT
OUT
PUT
BRAK
E PE
DAL
STAT
US
TACH
OM
ETER
OU
TPU
T
E-BR
AKE
OU
TPU
T
2013 Altima Sedan Y Y Y Y Y Y Y Y
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Page
3 2013 Nissan Altima Sedan CM6200/Blade-AL Install
Disassembly
1. Remove panel from the front, left hand side of the center console.
2. Remove (2) 10mm bolts holding the hood and gas flap release levers in place.
3. Remove the silver trim piece on the left side of the radio/climate
control panel.
4. Remove (2) Phillips head screws from the front of the steering column shroud. These screws can be accessed by turning the steering wheel left and right.
5. Remove the top half of the steering column shroud and pull the
black trim panel surrounding the instrument cluster straight towards you and remove.
6. Remove (1) Phillips head screw above the instrument cluster.
7. Unclip and remove panel surrounding push-to-start switch and
instrument cluster.
8. Remove (2) Phillips head screws from left and right of instrument cluster to remove and access BCM.
9. *Optional: Remove (1) Phillips head screw from the bottom side of
the steering column shroud. This is only needed to access the horn wire.
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Page
4 2013 Nissan Altima Sedan CM6200/Blade-AL Install
Body Control Module
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Page
5 2013 Nissan Altima Sedan CM6200/Blade-AL Install
Black 24-Pin Connector @ BCM
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Page
6 2013 Nissan Altima Sedan CM6200/Blade-AL Install
Green 40-pin Connector @ BCM
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Page
7 2013 Nissan Altima Sedan CM6200/Blade-AL Install
Black 40-pin Connector @ BCM
*The rear/mirror defroster wire will only test while the engine is running. Program as a latched (-) output from the remote starter.
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Page
8 2013 Nissan Altima Sedan CM6200/Blade-AL Install
Gray 24-Pin Connector @ BCM
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Page
9 2013 Nissan Altima Sedan CM6200/Blade-AL Install
+12V Power to Remote Start
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Page
10
2013 Nissan Altima Sedan CM6200/Blade-AL Install Brown Connector @ Driver’s Side Fuse Box
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Page
11
2013 Nissan Altima Sedan CM6200/Blade-AL Install IPDM Connections, under hood
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Page
12
2013 Nissan Altima Sedan CM6200/Blade-AL Install IPDM Connections Continued
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Page
13
2013 Nissan Altima Sedan CM6200/Blade-AL Install (-) Horn Trigger