2013 ieee eee hard ware projects

Academic Projects for

EEE (embedded) (2013-2014)

We will develop your ideas and your papers also,

For any Further information call-9603150547

e-mail [email protected]

EEE PROJECTS

Project code

Title of the Project Description Cost

IEEE & JOURNAL BASED PROJECTS

IJEE01 Distribution Transformer Monitoring Using GSM Technology

In this we will monitor transformer parameters like current, voltage and temperature, if any of these parameters found abnormal then this systems sends SMS alert to user.

IJEE02 Prepaid Energy Meter with GSM technology

the GSM technology is used so that the consumer would receive messages about the consumption of power (in watts) and if it reaches the minimum amount, it would automatically alert the consumer to recharge

IJEE03 Bluetooth remote home automation system using android application

With this we can control home appliances from our android phone. This safe and secure

IJEE04 Substation monitoring and controlling using GSM

Substation parameters are monitored and it also send alert message when these parameters are abnormal

IJEE05 Low cost wireless sensor network in field operation monitoring of ac motor

IJEE06 Applied research of the intelligent temperature-controlled speed adjustable motor in radiator fan

IJEE07 Electronic energy meter with instant billing

IJEE08 Remote power on/off control and current measurement for home electric outlets based on a low-power embedded board and ZIGBEE

IJEE09 Energy saving project for heating system with ZigBee wireless control network

IJEE10 Implementation of ZIGBEE-GSM based home security monitoring and remote control system

IJEE11 Automation of residential electricity cut off using network based embedded controller

IJEE12 Design of intelligent streetlight monitoring system based on micro controller

IJEE13 GSM-based wireless home appliances monitoring & control system

IJEE14 Real-Time Atomization Of Agricultural Environment for

Social Modernization of Indian Agricultural System

IJEE15 Method of Measuring Power Quality and Development of Monitor Device

IJEE A novel technique of ac power control using micro controller based inverter

PROJECTS BASED ON POWER ELECTRONICS

PE01

Design of controlled DC voltage regulator using semi converter

PE02

Design of controlled DC voltage regulator using full wave converter

PE03

Industrial battery charger by thysitor firing angle control

PE04

Dual converter using thyristors

PE05

Single phase H-bridge inverter with PWM technology using microcontroller

PE06 Single phase sine wave PWM H-bridge

inverter using micro controller

PE07

SPWM space vector pulse width modulation

PE08

Step down cyclo converter using dual converter SCR bridge

PE09

speed control of dc motor by using 8051

PE10

speed control of dc motor using four quadrant chopper

PE11

speed control of universal motor using IGBT

PE12

speed control of induction motor using voltage control

PE13

speed control of induction motor using frequency control

PE14

speed control of induction motor using v/f control

PE15

H-Bridge and PWM based DC Motor direction and speed control system

PE16 Transformer less Variable Frequency

Drive

PROJECTS BASED ON POWER SYSTEMS

PS01 Substation monitoring system (measurement of PF, voltage, current, temp.)

PS02 Transmission line multiple fault indication to substation

PS03 Automatic power factor correction using switching capacitors

PS04 Automatic power factor correction using static var compensators

PS05 Transformer oil temperature monitoring with automatic Circuit Breaker operation.

PS06 Design and construction of Earth fault relay for single phase power system

PS07 energy tapping identifier

PS08 Unbalanced three phase optimal power flow for smart grids

PS09 Automatic change over for three phase connection with data logger

PS10 Automatic switching of consumer connection in distribution feeder for different load distribution

PS11 Single phasing preventer for protection of three phase (3-ph) loads

PS12 Microcontroller based Three Phase Load safety implementation with phase fault detector

PS13 Method of Measuring Power Quality and Development of Monitor Device

PS14 An On-line Monitoring System of Transmission Line Conductor

PS15 Over voltage or under voltage tripping mechanism

PS16 Three phase fault analysis with auto reset on temporary fault and permanent trip other wise

PS17 Auto selection of any available phase in 3 phase supply system

PROJECTS BASED ON RENEWABLE ENERGY SOURCES

SL01 Solar based sinusoidal PWM inverter design using H-bridge

SL02 Solar pv cell tracking system for obtaining maximum power output

SL03 Solar based irrigation pumping system

SL04 Solar based LED street light system with time controlled and auto

dimming based on ambient light

SL05 Solar based traffic light control system

SL06 Wireless motor starter with acknowledgement using solar energy for agricultural application

PROJECTS BASED ON DIFFERENT APPLICATIONS

AS01 Smart Remote for controlling electrical appliance through android mobile.

With this we can control any electrical appliances with our android phone, no need of another remote .It is safe and secure also.

6500/- including Bluetooth module.

AS02 Virtual nurse- controlling wheel chair through android mobile

With this the patient can easily control his wheel chair through simple and smart touching of android mobile

6000/- including Bluetooth module and normal robot as wheel chair

(extra charge for different wheel chair arrangements)

AS07 Smart Home/office automation through android mobile.

With this we can control any electrical appliances in home or office or industry with our android phone, no need of another remote .It is safe and secure also.

6500/- including Bluetooth module

AS09 Smart regulator for controlling fan speed through Android mobile.

With this we can control speed of fan or AC from our android mobile.

6300/- including Bluetooth module.

AS10 AC motor speed controller through Android mobile.

With this we can control speed of AC motor from our android mobile

6750/- including Bluetooth module and AC motor.

AS11 Advanced street light controlling system through smart phone.

In this we can control street light from anywhere through smart phone.

6200/-

With ARM7

AS13 Industry/home/office automation through smart phone.

With this project we can control any electrical appliances of office or home or industry from anywhere by using Smart phone.

6000/-

With ARM7

AS14 Industrial parameters monitoring system through Smartphone

We can monitor different parameters like temperature, voltage, etc through online using smart phone from anywhere

6500/-

With ARM7

VP08 Home /office/industry electrical appliances controlling by phone call and confirmation through voice feedback.

In this we will switch off and switch on any electrical appliances just by calling to this system and press some buttons using DTMF technology. This system also sends voice feedback of device status that is whether device is on or off.

6000/-

VP12 Substation monitoring and controlling system with voice alerts.

This system monitor the different parameters of substation like voltage, current and temperature and gives respective voice alerts when something goes abnormal condition and takes necessary action.

6000/-

FS01 Standalone data logger in SD/MMC card with time stamp for industrial applications.

In this we will monitor and store different parameters in industry like temperature, voltage, etc .We will store these parameters values in SD card along with measured time and date also. The stored data format will be in .txt file or excel format so that we can go through entire monthly data using system.

6000/-

FS05 Advanced embedded system based a

As we know to save our world we have to reduce usage of paper. This project helps in eliminate

6000/-

paperless feedback system for colleges and event management systems

papers used in feedback systems. In this the feedback and suggestions should be entered from key board and this data will be stored in memory card in a file format using ARM7 micro controller.

ET01 Industry parameters monitoring and controlling system based on embedded web server.

In this we will monitor industry parameters like current, voltage, temperature, etc through online using internet from anywhere in the world and we can also control electrical appliances from internet.

6500/-

ET03 Zigbee and internet based advanced street light controlling system.

With the help of internet and Zigbee technology we can reduce man power in street light controlling process. We can control street lights from online itself.

6500/-

ET05 Internet based home/office automation.

With this system we can control any electrical appliances of home or office from anywhere in the world using internet.

6000/-

EE01 Wireless Scrutinizer for Detecting the fault in Power System.

We take a 230v supply voltage and measure the current in it. Fault condition is created by using bulbs. We measure the input and output current of the load using 2 ct's. When the bulb is on we assume fault is created and it is indicated in another section using rf.

6250/-

EE02 Wireless load measuring meter for power line.

The power in the transmission line is calculated by measuring voltage, current, power factor, and this is indicated in the display by sending the data wirelessly.

6500/-

EE03 Up-to-date Recording System of Power Line Losses.

The power loss in the transmission line is calculated by measuring the voltage drop in the line. The voltage drop is created by using a resistor and an inductor.

6800/-

EE06 Underground cable fault identification.

.

The objective of this project is to determine the distance of underground cable fault from base station in kilometers

6900/-

EE05 Two quadrant chopper drive for DC motor speed control.

This can be done for small dc motor as well for big (around half hp) motors also depends upon motor availability.

6600/- with small dc motor

EE06 Wireless motor starter with acknowledgement using solar energy for agricultural application

This system sends a message to user when power comes an also sends information whenever power is absent. This system works with solar energy

6500/- including GSM and solar

EE07 Four quadrant chopper drive for DC motor speed control

This can be done for small dc motor as well for big (around half hp) motors also depends upon motor availability

6800/- with small motor

EE08 design of closed loop controlled DC voltage regulator using full wave semi- converter

the 230v ac is converted in to dc using SCRs and the output voltage is measured by the ADC and the firing angle of the SCRs is controlled by the microcontroller only 2 SCRs and 2 diodes will be there is converting circuit

6750/-

EE09 Automatic power factor correction using switching capacitors.

The power factor is measured by using zero crossing detectors and it is corrected by connecting the capacitors using TRIACs or relays.

6200/-

EE10 Automatic power factor correction using static VAR compensators.

The power factor is measured by using zero crossing detectors and it is corrected by connecting a single capacitor of larger value using TRIAC and by controlling the firing angle.

6000/-

EE11 Design of closed loop controlled DC voltage regulator using full wave converter.

The 230v ac is converted in to dc using SCRs and the output voltage is measured by the ADC and the firing angle of the SCRs is controlled by the microcontroller only 4 SCRs will be there in converting circuit.

6000/-

EE12 Three phase load protector with automatic fault indication using micro

Whenever a three phase fault is occurred it will be indicated by using OP-AMPS and by measuring voltages and currents. And the type of

6000/-

processor. fault is indicated in the display.

EE13 Thyristor based soft starter.

The advantage of these starters is the starting current can be controlled to a much lower values than that of the value achieved with the traditional starters.

6500/-

EE14 Thyristor based star/delta starter.

6 bulbs are used to represent the motor. There are connected to form into 3 pairs with 2 each connected in series. They are connected in star first then in delta to the three phase supply.

6000/-

EE15 Unbalanced Three-phase Optimal Power Flow for Smart Grids.

Whenever a three phase load is unbalanced it will correct the load by switching some of the single phase loads to the other phases.

6000/-

EE16 Maximum Demand Controller for Industries.

This system automatically switches off the low priority appliances whenever maximum load power reached.

6750/-

EE17 Automatic Switching of consumer connection in distribution feeder for efficient load distribution


6000/-

EE18 Distribution grid transformers monitoring using GSM with forced cooling control system

The data at the distribution transformer is observed using GSM and if there is any fault it will on the cooling fans. If the fault is on current then it will switch off the transformer

6750/- including GSM

EE19 Remote substation monitoring system using bidirectional power line communication.

With the same 230 v power line we can monitor substation parameters.

Around 9000 to 10,000/- (modules are not ready)

EE20 Design of closed loop controlled DC voltage regulator using full

the 230v ac is converted in to dc using SCR's and the output voltage is measured by the ADC and the firing angle of the SCRs is controlled by the

6500/-

wave converter through computer.

microcontroller only 2 SCRs and 2 diodes will be there is converting circuit. The required output voltage is set by using hyper terminal.

EE21 Design of closed loop controlled ac voltage regulator using TRIAC.

Same as the speed control of ac motor but here output voltage is measured using ADC.

6000 with bulb as motor.

EE22 Transmission line multiple faults detection and indication to electricity board.

Voltage and current faults are detected using differential protection scheme and the type of the fault is transmitted using RF.

6500/-

EE23 Power theft identification system in distribution lines using differential power measurement.

Current at both the ends of transmission line are measured using CTs and if there is a difference in those currents it means power was theft.

6000/-

EE24 Automatic transformer shunt and series parameter calculation from open circuit and short circuit test reading.

The OC and SC test readings of the transformer are given through keypad and microcontroller will do calculation and give the output on the LCD.

6750/-

EE25 Closed loop dc motor speed control.

In this we will control the speed of dc motor and we also take the feedback from the motor and correct the speed level to desired level.

6750/-

EE26 Design of cyclo converter using micro controller.

The input supply frequency is about 50 Hz. We can get the multiples of 50hz using the SCRs. controller will generate pulses for 4 SCRs and the output frequency of the sine wave is controlled.

6800/-

EE27 Reverse power protection for generator.

The phase angle of the current and voltage are measured to measure whether the power is in reverse direction of not if the power is in reverse

6750/-

direction then it will switch of the supply.

EE28 Automatic transformer protection using numerical relay.

Difference in currents of the two current transformers' will give a buzzer sound.

6750/-

EE29 Automatic phase sequence corrector.

Whenever the RYB phase sequence is changed it will be corrected by using relays.

6200/-

EE30 Design of earth fault relay.

Whenever there is an internal fault or the earth fault then we can sense that by measuring the magnitude of the current and this will give type of the fault.

6750/-

EE31 Reactive power compensation using STACOM.

The power factor is measured by using zero crossing detectors and it is corrected by connecting a single capacitor of larger value using TRIAC and by controlling the firing angle.

3000/-

EE32 Speed control of universal motor using IGBT.

This will be same as the speed control of the ac motor using TRIAC but only difference is IGBT is used to vary the voltage and we will control the dc voltage. First we will convert the 230v ac into dc and then we will control.

6200/- including motor

EE33 Efficient power saver for street lights using LDR, RTC, LEDs light with solar power

This project saves more power that is being wasted in present street light switching. In this we will consider time and sunlight intensity and we use LED lights and solar power

6500

EE34 Agricultural motor controlling with motor safety and water level indicator using GSM.

The former can control his field motor without need of going to his field just by sending message. This system also provides safety motor from over heat, low phase power and water level indication.

6000/- including GSM

EE35 Automatic changeover for 3 phases connections with data logger.


6800/-

EE36 Solar Tracking system for Maximum power

In this the panel will give maximum power by changing its direction according to sun light

Depends upon Mechanical

output with real time power monitoring system.

direction.

It can be done with two motors arrangement or single motor arrangement

arrangement and size of solar panel (2500 to 6000)

EE37 Voice guider and medicine reminder for patients and old age persons.

In this the user will be given one remote (IR or RF or ZIGBEE), he has to press any button to get what service he wants and that is played from voice IC so that any person can hear it and come to the user. Another feature of this project is to remind the user for medicines.

6750/- with RF

EE38 Broken conductor detection for overhead lines.

The broken conductor can be sensed by using the voltage drop in the line. We will give three switches to indicate broken condition when the switch is operated it will indicate which switch is operated in terms of kilometers.

6000/-

EE39 Intelligent shopping trolley using RFID

With this we can save billing time and instantaneously the rate and expiry date of the product will be displayed so that we can do the shopping within our budget.

6500 with RFID and 8 tags

EE40 Elegant home with power saving, security, safety, remote controlling and auto control of water tank motor

In this we will provide multi features to home like remote controlling of home appliances ,auto controlling of lights depends upon sunlight and auto controlling of water tank motor when tank is full and alert the user when intruders come or when gas leakage or fire accident occurs

6000/-

EE41 Intelligent train engine to avoid accidents and controlling railway gate automatically

In this we will control the train by monitoring the driver’s position or activeness and the gate will b e controlled automatically when train is near the gate.

6000/-

EE42 Design And Development Of Prepaid Energy Meter With Serial Data

In this we have one smart card which contains number units depends upon the amount we will pay. These units will be given to energy meter system to activate and it will supply power to

6500/- with smart card reader

Transmission home till that units are consumed and we have recharge same card again.

EE43 Protection And Control Of Low Voltage Motors Used In Industrial Applications.

The motor will be protected from over voltage, current, temperature and ground fault conditions. This system immediately switches off the motor whenever abnormal condition occurs and intimate to control room through RF communication.

6000/- (with RF and motor)

EE44 Flexible load sharing of transformer with GSM SMS

It continuously measure the load current and it shares this load with another transformer when the load is more and send an alert through message. The user can also share directly whenever he wants just by sending message

6500/-

EE45 Agriculture field motor control system using GSM

Motors in the field are controlled with the help of predefined SMS.

3000/-

EE46 Industrial Electrical Devices Control System

By this project, we can control the devices in the industries by sending predefined SMS to the controlling unit.

6000/-

EE47 GSM based DC Motor Speed and Direction Control

The speed and direction of DC motor can be controlled by sending predefined SMS to the system

6000/-

EE48 Cell Phone based Street Light Controlling System with light failure indication system.

The on and off controls of the street lights can be done using GSM technology. If any light does not work then that information is sent as message to electricity department.

6700/-with GSM

EE49 Temperature Measurement over GSM Mobile

Temperature sensor is used to measure the temperature in a particular room and this measured value is sent through GSM to the user mobile.

3000/-with GSM

EE50 Password protected GSM based Device control.

Controlling the devices from remote places only by authorized persons.

6000/-with GSM

EE51 Fingerprint based Access Control system

Security is provided in restricted areas using fingerprint technology. The persons are asked to give their fingerprint and the system compares this fingerprint with the already stored information in the system and only allows into if it is an authorized one.

6000/-with Finger print module

EE52 Finger print based elevator (lift) operating system.

Only authorized persons are allowed to access the lift controls.

6000/-

EE53 Low Cost Wireless Sensor Network In Field Operation Monitoring Of AC Motor.

The motor will be protected from over voltage, current, temperature and ground fault conditions. This system immediately switches off the motor whenever abnormal condition occurs and intimate to control room through RF communication.

3500 with RF

5000 with Zigbee

EE54 A Zigbee Smart Energy Meter Implementation For Energy Efficient Buildings.

In This system one control system collects the data from different meters in the building and we can control the appliances of each floor through this control system.

7000/-

EE55 Development of a smart power meter for AMI based Zigbee communication Advanced Metering Infrastructure (AMI).

This will be useful in heavy apartment’s .individual meters data will be collected and maintained by main system .this main system sends collated data to electricity board.

3000 without modules

7500 with module

And 2500 per each extra meter

EE56 Remote Power On/Off Control And Current Measurement For Home Electric Outlets Based On A Low-Power Embedded Board And Zigbee

We can control the home appliances through Zigbee remote and this system will display the power consumed by the loads.


5750 with module

Communication

EE57 Remote-Controllable and Energy-Saving Room Architecture Based on Zigbee Communication.

In this we can control the loads through Zigbee remote or they will also be controlled automatically to save the power.


6000 with module

EE58 Applications of Short Range Technologies to Industrial Automation: A Zigbee Approach.

Industrial devices are monitored and controlled using Zigbee Technology.


5750 with module

EE59 System for Measuring Power Parameters with Zigbee Connectivity.

This system measures the power from each home and sends to central system which is useful in apartments.


6000 with module

EE60 Wireless Data Encryption and Decryption Using ZigBee

Which used in security applications 2750 without modules

5750 with module

EE61 ZigBee Based Automated Irrigation System.

Using ZigBee this system controls the irrigation system automatically.


5750 with module

EE62

Bluetooth Robot with CMOS image sensor(SPY ROBOT)

We can control this robot through Bluetooth from PC and the video sent by robot can be seen in TV or PC

7000/-

EE63 Remote controlled home automation using Bluetooth

With this we can control home appliances like lights, fan, motor, etc through Bluetooth. This is safe and secured.

6500/-

EE64 Bluetooth based industrial data acquisition system

This project measures different parameters in industry like voltage, current and temperature and transmit this data to PC continuously through

6000/-

Bluetooth.

EE65 Industrial devices controlling system using Bluetooth

With this we can control industry appliances like machines and motors through Bluetooth. This is safe and secured.

6000/-

EE66 Intelligent electricity billing system using Bluetooth

This system receives the units consumed from various meters and generates the bill accordingly. This saves the cost, time and manpower.

6000/-

EE67 Touch screen based smart home automation

We can control the home appliance just by smart touch


4000 with touch screen and 5000 with RF and touch screen

EE68 Electrical parameters data logger

In this we will continuously measure and display electrical parameters like voltage, current, frequency and temperature

6000/-

EE69 Smart horn for vehicles with alcohol detection for drivers

This system reduces the sound pollution that is generated by unnecessary use of horn. This controls the horn intensity depends upon vehicle distance and also gives the special sound when object is detected at back side if vehicle moves backside and this system only allows for driving if driver does not consume alcohol

6250/-

EE70 Smart blind stick with ultra sonic sensor.

This stick gives different sound intensity depends upon the object distance from person or we can play some voice also depends upon distance.

6000/-

EE71 PIR sensor based power saver for auditorium and

This project is used to save the power in conference halls and in auditoriums. When there are no persons in the hall ,then lights and fans

6300/-

conference halls.

will be switched off automatically

EE72 Intelligent security and safety system for colleges and industries

This project detects fire accidents, gas leakages and also alert through SMS when main door is closed without closing any other room entrance or if any other door is opened without opening main door

6500/-

EE73 An Efficient Monitoring Of Substations Using Microcontroller Based Monitoring System using RF

This system monitors the subsystem to provide safety and intimate to control room through RF

6500/-

EE74 Wireless Power Grid Controller

With this we can control the power grid through PC using RF communication

6000/-

EE75 RF based industrial Automation System

The industrial loads like motors, coolers, etc are monitored and controlled by a RF remote.

6500/-

EE76 DC motor speed and direction control using RF

In this project we can control speed and direction of DC motor depending on the requirement using RF signals

6500/-

EE77 Wireless Stepper motor control using RF

The stepper motor direction can be controlled using RF communication.

6500/-

EE78 Power Management System in Hotels using PC.

The various appliances in the hotels are controlled by giving commands from the PC.

6000/-

EE79 PC based Hi-tech Home Implementation.

We can control the home appliances just by sitting in front of PC.

6000/-

EE80 Industrial Automation using PC.

The industrial appliances are controlled by the commands issued from the PC. The controlling unit receives these commands from the PC and

6000/-

controls the devices according to the commands.

EE81 Industrial electrical appliances control using IR.

To reduce the manpower for controlling the devices we are implementing this project. Here we will be controlling devices by using a general TV REMOTE.

6000/-

EE82 DC motor speed and direction control using IR.

A DC motor is controlled using wireless communication. In this project we can control the speed of the dc motor and its direction.

6000/-

EE83 Stepper motor control using IR

The direction of the stepper motor can be controlled using an IR remote.

6200/-

EE84 Automatic Room light controller with visitor counter using IR.

This project displays the number of persons present in the room and controls the light according to the intensity of daylight.

6000/-

EE85 Auditorium Controlling System

The lights and fans in auditorium are controlled by IR remote.

6000/-

EE86 Shopping Malls Security and Power Management System using IR

The design of security and the method of consuming the power in the shopping malls are carried out in this project.

6000/-

EE87 AC motor speed control using TRIAC

The speed of AC motor can be varied rapidly on and off by TRIAC.

6000/-

EE88 Phase Sequence Indicator and Controlling System.

The controlling unit continuously whether 3-phase is coming from the line or not so as to run the motors which run only with 3-phase. If 3-phase is not coming, the controlling unit automatically shuts down the system.

6000/-

EE89 Boiler Monitoring and Control System.

The temperature is measured and controlled for the industrial boilers.

6000/-

EE90 Involuntary Industrial Power Scheduler using Embedded System.

The power management in the industries can be done effectively using this project.

6800/-

EE91 Power Saver for Advertisement Hoardings using RTC.

This system switches on the lights only at preprogrammed timings using RTC thus saving the power up to the maximum extent.

6800/-

EE92 Solar Tracker for acquiring maximum power.

The project aims at designing a system that would sense and follow the position of the sun and rotate the panel in the direction of the sun to obtain maximum power output.

6000/-

EE93 Water Scheduling for Municipalities

Water supply to different localities is done on time basis. The supply will be automatically cut once the time allotted to that particular locality lapses.

6800/-

EE94 Electronic Security System for Homes/Industries with auto dialer.

This system provides security to the homes or offices by interfacing sensors with the controlling units. If anything goes wrong, the system automatically dials up to the predefined number and also activates the alert system.

6000/-

EE95 Energy Saver for Automatic Room Light Controller with Visitor Counter

The system aims at saving the power by switching on/off the light depending upon the sensor output. It also counts the number of persons present in the hall and displays this value on the LCD.

6000/-