2013-14 automotive fluid transfer systemspbwdist.com/catalogs/ags auto fluid transfer...
TRANSCRIPT
TUBING & HOSE REPAIR SPECIALTIES
BRAKE, FUEL, TRANSMISSION LINES
TUBE NUTS, UNIONS, & ADAPTER FITTINGS
MERCHANDISING ASSORTMENTS & DISPLAYS
OIL DRAIN PLUGS, GASKETS, & SPECIALTY TOOLS
LUBRICANTS & CHEMICALS
TUBING & HOSE REPAIR SPECIALTIES
BRAKE, FUEL, TRANSMISSION LINES
TUBE NUTS, UNIONS, & ADAPTER FITTINGS
MERCHANDISING ASSORTMENTS & DISPLAYS
OIL DRAIN PLUGS, GASKETS, & SPECIALTY TOOLS
LUBRICANTS & CHEMICALS
Transfer Systems Automotive Fluid
Connecting & Fastening Solutions Guide
Transfer Systems Automotive Fluid
Connecting & Fastening Solutions Guide
2013-142013-14
Information
Domestic Lines• Brake, Fuel, TransmissionImport Lines• Japanese, British, European, 6mmAdapter Brake Lines• 3/16”, 1/4”, 6mmFloor & Wall Displays Coiled Tubing
Fittings• Tube Nuts, Unions, & Adapters Fitting AssortmentsACCUFIT™ Oil Drain Plugs• Oil Drain Plugs, Gaskets, Repair Plugs, and AssortmentSpecialty Tools• Wrenches, Flaring Tool, Fitting Gauges, and Tubing Repair Line Repair Systems
Lubricants & Chemicals
TABLE OF CONTENTS PAGE34
5
10–11
20-22
12–19
22-26
27-30back
6–7
8–9
3
INFORMATION
The braking system is a critical component of any vehicle and literally controls the safety of drivers, passengers, and anyone else sharing the road. The tubing which carries the braking fluid between the master cylinder and the slave cylinders at the wheels is a vital part of this system. This tubing is extremely susceptible to the high-pressure it must handle (during braking) and the environment (adverse weather, road treatments, and road debris) to which it is continuously exposed. AGS lines and coils are made of the most advanced materials and processes available today. Our tubing construction and coatings allow for the most workable, corrosion resistant, and safest product possible. In addition, the quality of the flares (end-forms) and tube nuts of all AGS lines meet and exceed standards for the best seal possible. While the vast majority of vehicles utilize 3/16", 1/4", or 6mm diameter tubing for brake applications, all AGS lines offer the same advanced construction and technology. For a complete explanation of the braking system go to www.agscompany.com.
All AGS tubing conforms to the following:
• Wall thickness = .028 (.70mm)• Elongation in 2" (50mm) = 14%• Hardness (Rockwell 30T Scale): 65• Clean finish inside and out• Leak and vibration resistance • Specifications: SAE J527b DIN 74234 SAE J1290 ISO 4038 SAE J1650 GM123M ASTM A254
BRAKING SYSTEM
BRAKE, FUEL, & TRANSMISSION TUBING SPECIFICATIONS
Copper brazedbond
Electric ZincPlating
Double-WallClose tolerance,low carbon roll-formed steel
Beveled seam edgesfor smooth, bead-free joint
Brazed CopperCoating
• Double-Walled• Low Carbon Steel
• Copper Brazed• Zinc Undercoating
STANDARD STEEL
Example Yield Strength(0.2% offset)O.D. Tensile
StrengthSize
300 Series400 Series500 Series600 Series700 Series300 CN Series400 CN Series500 CN Series600 CN Series
BL-308 or PA-308BL-408 or PA-408BL-508 or PA-508BL-608 or PA-608BL-708 or PA-708CNC-325CNC-425CNC-525CNC-625
3/16" (4.76mm)1/4" (6.35mm)5/16" (8.00mm)3/8" (9.53mm)6mm (.236")3/16" (4.76mm)1/4" (6.35mm)5/16" (8.00mm)3/8" (9.53mm)
24,656 PSI24,656 PSI24,656 PSI24,656 PSI24,656 PSI15,229 PSI15,229 PSI15,229 PSI15,229 PSI
42,061 PSI42,061 PSI42,061 PSI42,061 PSI42,061 PSI39,885 PSI39,885 PSI39,885 PSI39,885 PSI
Working Pressure4,500 PSI3,000 PSI2,300 PSI1,800 PSI3,300 PSI4,200 PSI2,900 PSI2,100 PSI1,700 PSI
Burst Pressure
17,900 PSI12,100 PSI9,200 PSI7,400 PSI13,100 PSI17,000 PSI11,500 PSI8,700 PSI7,000 PSI
Copper brazedbond
Poly-Armour®
PVF Coating
Electric Zinc plating
Double-WallClose tolerance,low carbon roll-formed steel
Beveled seam edgesfor smooth, bead-free joint
Brazed CopperCoating
• Double-Walled• Low Carbon Steel• Copper Brazed
• Zinc Undercoating• PVF Coated• EZ-Bend Technology
POLY-ARMOUR®
E-ZE-ZE-Z BENDBENDBENDT E C H N O L O G Y
®
Master Cylinder
Slave Cylinder
Brake Line
90-10 COPPER NICKEL
Cold Drawn & Annealed Copper Nickel Alloy
• Single-Walled• 90-10 Copper Nickel Alloy
EZ-BEND ® Technology refers to the combined features of the AGS Poly-Armour ® lines and coils that make them easy to work with and bend. In the case of 3/16" diameter lines and coils, bending tools are not even necessary. All lines and coils (including AGS Standard Steel) are kink-proof and will retain shape after bending.
* Working and burst pressures calculated using the conservative Barlow’s Formula. Tensile strength was used to indicate material strength and a safety factor of 4 was used to find working pressure.
DOMESTIC LINE – SAE INVERTED FLARE
Poly-ArmourCatalog No.
PA-308PA-312PA-320PA-330
PA-340-5/PA-340PA-351-5/PA-351PA-360-5/PA-360
PA-372
NiCoppCatalog No.
CN-308CN-312CN-320CN-330
CN-340-5/CN-340CN-351-5/CN-351CN-360-5/CN-360CN-372-5/CN-372
StandardCatalog No.
BL-308BL-312BL-320BL-330BL-340BL-351BL-360BL-372
Description
3/16" X 8"3/16" X 12"3/16" X 20"3/16" X 30"3/16" X 40"3/16" X 51"3/16" X 60"3/16" X 72"
Lines per Tube
10101010
5 / 105 / 105 / 105 / 10
Edelmann No.
308ST312ST320ST330ST340ST351ST360ST
372PVF
Weatherhead No.
S308S312S320S330S340S351S360
–
3/8-24 SHORT (BLF-12)
3/16" O.D.
1/4" O.D.
3/8-24 LONG (BLF-10)
BRAKE LINE FOR DOMESTIC VEHICLESBLF-10 AND BLF-12BLU-3
APPLICATION:FITTINGS:
UNION:
Poly-ArmourCatalog No.
PA-408PA-412PA-420PA-430
PA-440-5/PA-440PA-451-5/PA-451PA-460-5/PA-460
PA-472
StandardCatalog No.
BL-408BL-412BL-420BL-430BL-440BL-451BL-460BL-472
Description
1/4" X 8"1/4" X 12"1/4" X 20"1/4" X 30"1/4" X 40"1/4" X 51"1/4" X 60"1/4" X 72"
Lines per Tube
10101010
5 / 105 / 105 / 105 / 10
Edelmann No.
408ST412ST420ST430ST440ST451ST460ST
472PVF
Weatherhead No.
S408S412S420S430S440S451S460
–
7/16-24 SHORT (BLF-13) 7/16-24 LONG (BLF-16)
BRAKE LINE FOR DOMESTIC VEHICLESBLF-13 AND BLF-16BLU-4
APPLICATION:FITTINGS:
UNION:
5/16" O.D.
Poly-ArmourCatalog No.
PA-508PA-512PA-520PA-530PA-540PA-551PA-560PA-572
StandardCatalog No.
BL-508BL-512BL-520BL-530BL-540BL-551BL-560BL-572
Description
5/16" X 8"5/16" X 12"5/16" X 20"5/16" X 30"5/16" X 40"5/16" X 51"5/16" X 60"5/16" X 72"
Lines per Tube
55555555
Edelmann No.
508ST512ST520ST530ST540ST551ST560ST
572PVF
Weatherhead No.
S508S512S520S530S540S551S560
–
1/2-20 (BLF-14) 1/2-20 (BLF-14)
FUEL & TRANSMISSION LINE FOR DOMESTIC VEHICLESBLF-14BLU-5
APPLICATION:
FITTINGS:UNION:
FUEL & TRANSMISSION LINE FOR DOMESTIC VEHICLESBLF-15BLU-6
APPLICATION:
FITTINGS:UNION:
3/8" O.D.
Poly-ArmourCatalog No.
PA-608PA-612PA-620PA-630PA-640PA-651PA-660PA-672
StandardCatalog No.
BL-608BL-612BL-620BL-630BL-640BL-651BL-660BL-672
Description
3/8" X 8"3/8" X 12"3/8" X 20"3/8" X 30"3/8" X 40"3/8" X 51"3/8" X 60"3/8" X 72"
Lines per Tube
44444444
Edelmann No.
608ST612ST620ST630ST640ST651ST660ST
672PVF
Weatherhead No.
S608S612S620S630S640S651S660
–
5/8-18 (BLF-15) 5/8-18 (BLF-15)
4
DOMESTIC LINES
®
NiCoppCatalog No.
CN-408CN-412CN-420CN-430
CN-440-5/CN-440CN-451-5/CN-451CN-460-5/CN-460CN-472-5/CN-472
NiCoppCatalog No.
CN-508CN-512CN-520CN-530CN-540CN-551CN-560CN-572
NiCoppCatalog No.
CN-608CN-612CN-620CN-630CN-640CN-651CN-660CN-672
®
®
®
3/16”3/16”
5/16”5/16”
3/8”3/8”
1/4”1/4” DOMESTIC LINE – SAE INVERTED FLARE
DOMESTIC LINE – SAE INVERTED FLARE
DOMESTIC LINE – SAE INVERTED FLARE
5
JAPANESE LINE – SAE INVERTED FLARE/METRIC
StandardCatalog No.
BLJ-308BLJ-312BLJ-320BLJ-330BLJ-340BLJ-351BLJ-360
StandardCatalog No.
BLB-308BLB-312BLB-320BLB-330BLB-340BLB-351BLB-360
StandardCatalog No.
BLE-308BLE-312BLE-320BLE-330BLE-340BLE-351BLE-360BLE-372BLE-384
Poly-ArmourCatalog No.
PAJ-308PAJ-312PAJ-320PAJ-330PAJ-340PAJ-351PAJ-360
Description
3/16" X 8"3/16" X 12"3/16" X 20"3/16" X 30"3/16" X 40"3/16" X 51"3/16" X 60"
Lines per Tube
5555555
Edelmann No.
4308ST4312ST4320ST4330ST4340ST4351ST4360ST
Weatherhead No.
SJ308SJ312SJ320SJ330SJ340SJ351SJ360
Poly-ArmourCatalog No.
PAE-308PAE-312PAE-320PAE-330PAE-340PAE-351PAE-360PAE-372 PAE-384
Description
3/16" X 8"3/16" X 12"3/16" X 20"3/16" X 30"3/16" X 40"3/16" X 51"3/16" X 60"3/16" x 72" 3/16" x 84"
Lines per Tube
555555555
Edelmann No.
6308ST6312ST6320ST6330ST6340ST6351ST6360ST
––
Weatherhead No.
SC308SC312SC320SC330SC340SC351SC360
––
Poly-ArmourCatalog No.
PAB-308PAB-312PAB-320PAB-330PAB-340PAB-351PAB-360
Description
3/16" X 8"3/16" X 12"3/16" X 20"3/16" X 30"3/16" X 40"3/16" X 51"3/16" X 60"
Lines per Tube
5555555
Edelmann No.
5308ST5312ST5320ST5330ST5340ST5351ST5360ST
Weatherhead No.
SB308SB312SB320SB330SB340SB351SB360
BRITISH LINE – ISO BUBBLE FLARE
EUROPEAN LINE – ISO BUBBLE FLARE/METRIC
M10 X 1.0 LONG (BLF-40)
3/16" O.D.
3/16" O.D.
3/16" O.D.
M10 X 1.0 LONG (BLF-40)
BRAKE LINE FOR JAPANESE VEHICLESBLF-40BLU-9
APPLICATION:FITTINGS:
UNION:
3/8-24 (BLF-38) 3/8-24 (BLF-38)
BRAKE LINE FOR BRITISH VEHICLESBLF-38BLU-7
APPLICATION:FITTINGS:
UNION:
M10 X 1.0 (BLF-39) M10 X 1.0 (BLF-39)
BRAKE LINE FOR EUROPEAN VEHICLESBLF-39BLU-8
APPLICATION:FITTINGS:
UNION:
IMPORT LINES
®
®
®
3/16”3/16”
3/16”3/16”
3/16”3/16”
BRAKE LINE FOR SOME GM VEHICLES (SATURN, CADILLAC)BLF-51BLU-10
APPLICATION:
FITTINGS:UNION:
StandardCatalog No.
Poly-ArmourCatalog No.
PA-708PA-712PA-720PA-730PA-740PA-751PA-760PA-772
Description
6mm X 8"6mm X 12"6mm X 20"6mm X 30"6mm X 40"6mm X 51"6mm X 60"6mm X 72"
Lines per Tube
55555555
Edelmann No.
708PVF712PVF720PVF730PVF740PVF751PVF760PVF772PVF
Weatherhead No.
––––––––
GM LINE – ISO BUBBLE FLARE/METRIC
6 mm O.D.
M12 X 1.0 (BLF-51) M12 X 1.0 (BLF-51)
®
6mm6mm
BL-708BL-712BL-720BL-730BL-740BL-751BL-760BL-772
NiCoppCatalog No.
CNJ-308CNJ-312CNJ-320CNJ-330CNJ-340CNJ-351CNJ-360
NiCoppCatalog No.
CNB-308CNB-312CNB-320CNB-330CNB-340CNB-351CNB-360
NiCoppCatalog No.
CNE-308CNE-312CNE-320CNE-330CNE-340CNE-351CNE-360
––
8" ADAPTER BRAKE LINES3/16”3/16”3/16" O.D.
ADAPTER BRAKE LINES
6
Description
3/8-24 SAE Inverted to M10 x 1.0 SAE Inverted
Lines per Tube
5
Edelmann No.
911PVF
Nut Color
Brass
3/8-24 (BLF-12) M10 x 1.0 (BLF-40)
Poly-ArmourCatalog No.
PAA-O310
StandardCatalog No.
BLA-O310
3/16" O.D.
Description
3/8-24 SAE Inverted to M11 x 1.5 ISO Bubble
Lines per Tube
5
Edelmann No.
914PVF Yellow
3/8-24 (BLF-12) M11 x 1.5 (BLF-47)
Poly-ArmourCatalog No.
PAA-Y311
StandardCatalog No.BLA-Y311
3/16" O.D.
Description
3/8-24 SAE Inverted to M12 x 1.0 ISO Bubble
Lines per Tube
5
Edelmann No.
910PVF Blue
3/8-24 (BLF-12) M12 x 1.0 (BLF-48)
Poly-ArmourCatalog No.
PAA-B312
StandardCatalog No.BLA-B312
3/16" O.D.
Description
3/8-24 SAE Inverted to M13 x 1.5 ISO Bubble
Lines per Tube
5
Edelmann No.
912PVF Olive
3/8-24 (BLF-12) M13 x 1.5 (BLF-49)
Poly-ArmourCatalog No.
PAA-O313
StandardCatalog No.BLA-O313
AGS 8" adapter brake lines allow dissimilar connections to be made within the same system. Adapter lines are available in common brake line tube sizes 3/16", 1/4", and 6mm. AGS offers OE matching lines. ISO/Bubble to SAE/Inverted, English thread to Metric thread, and enlarging/reducing lines.
*Adapts Japanese port to a standard 3/16" Domestic brake system
*Adapts metric bubble flare to a standard 3/16" Domestic brake system.
*Adapts metric bubble flare to a standard 3/16" Domestic brake system.
*Adapts metric bubble flare to a standard 3/16" Domestic brake system.
3/16" O.D.
3/8-24 (BLF-12) 7/16-24 (BLF-11)
Poly-ArmourCatalog No.
PAA-R340
StandardCatalog No.BLA-R340
*Adapts 1/4" Domestic port to a standard 3/16" Domestic brake system.
3/16" O.D.
3/8-24 (BLF-12) 1/2-20 (NA)
Poly-ArmourCatalog No.
PAA-R350
StandardCatalog No.BLA-R350
*Adapts 5/16" Domestic port to a standard 3/16" Domestic brake system.
3/16" O.D.
Poly-ArmourCatalog No.PAA-O380
StandardCatalog No.BLA-O380
3/8-24 (BLF-12) M10 x 1.0 (BLF-39)
*Adapts European port to a standard 3/16" Domestic brake system.
3/16" O.D.
Poly-ArmourCatalog No.
PAA-G360
StandardCatalog No.BLA-G360
NiCoppCatalog No.CNA-G360
NiCoppCatalog No.CNA-O380
NiCoppCatalog No.CNA-R340
NiCoppCatalog No.CNA-R350
Description
3/8-24 SAE Inverted to 1/2-20 SAE Inverted
Lines per Tube
5
Edelmann No.
338STA
3/8-24 (BLF-12) 1/2-20 (BLF-41)
*Adapts 5/16" Domestic port to a standard 3/16" Domestic brake system.
Nut Color
Nut Color
Nut Color
Description
3/8-24 SAE Inverted to 7/16-24 SAE Inverted
Lines per Tube
5
Edelmann No.
318PVF Red
Nut Color
Description
3/8-24 SAE Inverted to 1/2-20 SAE Inverted
Lines per Tube
5
Edelmann No.
328STA Black
Nut Color
Green
Nut Color
Description
3/8-24 SAE Inverted to M10 x 1.0 ISO Bubble
Lines per Tube
5
Edelmann No.
913PVF Olive
Nut Color
8" ADAPTER BRAKE LINES (Continued)3/16”3/16”
8" ADAPTER BRAKE LINES
8" ADAPTER BRAKE LINES
6mm O.D.
6mm O.D.
7
ADAPTER BRAKE LINES
3/16" O.D.
1/4" O.D.
1/4" O.D.
1/4" O.D.
Poly-ArmourCatalog No.
PAA-B410
StandardCatalog No.BLA-B410
NiCoppCatalog No.CNA-B410
NiCoppCatalog No.CNA-S420
NiCoppCatalog No.CNA-O370
NiCoppCatalog No.CNA-B430
7/16-24 (BLF-13) 9/16-18 (BLF-43)
Poly-ArmourCatalog No.
PAA-S420
StandardCatalog No.BLA-S420
7/16-24 (BLF-13) 1/2-20 (BLF-44)
Poly-ArmourCatalog No.
PAA-B430
StandardCatalog No.BLA-B430
7/16-24 (BLF-13) 7/16-24 (BLF-13)
Poly-ArmourCatalog No.
PAA-B710
StandardCatalog No.BLA-B710
Description
M12 x 1.0 ISO Bubble to M14 x 1.5 ISO Bubble
Lines per Tube
5
Edelmann No.
915PVF Black
M12 x 1.0 (BLF-51) M14 x 1.5 (BLF-53)
Poly-ArmourCatalog No.
PAA-B720
StandardCatalog No.BLA-B720
Description
M12 x 1.0 ISO Bubble to M12 x 1.5 ISO Bubble
Lines per Tube
5
Edelmann No.– Olive
M12 x 1.0 (BLF-51) M12 x 1.5 (BLF-52)
Poly-ArmourCatalog No.
PAA-O370
StandardCatalog No.BLA-O370
3/8-24 (BLF-12) 9/16-18 (BLF-42)
*Adapts 9/16-18 port to a standard 3/16" Domestic brake system.
*Adapts 9/16-18 port to a standard 1/4" Domestic brake system.
*Adapts non-standard metric bubble to standard 6mm brake system.
*Adapts non-standard metric bubble to standard 6mm brake system.
*Connects 5/16" Domestic port to a 1/4" Domestic brake system.
*Connects 1/4" Domestic port to a 1/4" Domestic brake system.
Description
3/8-24 SAE Inverted to 9/16-18 SAE Inverted
Lines per Tube
5
Edelmann No.
348STA Olive
Nut Color
Description
7/16-24 SAE Inverted to 9/16-18 SAE Inverted
Lines per Tube
5
Edelmann No.
418STA Blue
Nut Color
Description
7/16-24 SAE Inverted to 7/16-24 SAE Inverted
Lines per Tube
5
Edelmann No.
428STA Brass
Nut Color
Nut Color
Nut Color
1/4”1/4”
6mm6mm
Description
7/16-24 SAE Inverted to 1/2-20 SAE Inverted
Lines per Tube
5
Edelmann No.
438PVF Silver
Nut Color
FLOOR DISPLAYSPoly-ArmourCatalog No.
PAD-1*PAD-2PAD-3PAD-4PAD-6
StandardCatalog No.
BLD-1*BLD-2BLD-3BLD-4
Description
Floor Display – (No Lines or Tubes)Floor Display – Domestic/Import/Adapter LinesFloor Display – Domestic LinesFloor Display – Import LinesFloor Display – Domestic/Import/6mm/Adapters
Dimensions With LinesHeight x Width x Depth
30" x 11" x 18"63" x 27" x 18"63" x 11" x 18"63" x 11" x 18"63" x 33" x 18"
8
FLOOR & WALL DISPLAYS
®
WALL DISPLAYS
WALL DISPLAYS
DescriptionStandardCatalog No.
BLD-14BLD-15BLD-18BLD-19BLD-20BLD-21 – –BLD-24BLD-26BLD-28
Wall Display – Domestic (No Lines)Wall Display – Import (No Lines)Wall Display – 6mm LinesWall Display – Domestic LinesWall Display – Import LinesWall Display – Domestic & Import LinesWall Display – Domestic Lines (Installer Assortment)Wall Display – Import Lines (Installer Assortment)Wall Display – 6mm (No Lines)Wall Display – Adapter LinesWall Display – Adapter (No Lines)
Dimensions With LinesHeight x Width x Depth
10" x 24" x 6"10" x 17" x 3"69" x 7" x 6"69" x 24" x 6"69" x 17" x 3"69" x 42" x 6"69" x 24" x 6"69" x 17" x 6"9.5" x 7" x 6"16" x 7" x 6"10" x 7" x 6"
H
W D
H
W D
PAD-2 (PAD-3 + PAD-4 + ADAPTERS)
PAD-6 (PAD-3 + PAD-4 + ADAPTERS + 6mm)
PAD-3 PAD-4 PAD-26
CND-15PAD-20PAD-19 PAD-21 (PAD-19 + PAD-20)
DIMENSIONAL DATAFLOOR DISPLAYS
WALL DISPLAYS
PAD-18
–
–
–––––––
CND-28
CND-14CND-15
Poly-ArmourCatalog No.
®
PAD-14PAD-15PAD-18PAD-19PAD-20PAD-21PAD-22PAD-23PAD-24PAD-26PAD-28
NiCoppCatalog No.
* Comes as 1 floor display for either import or domestic lines.
StandardCatalog No.
PA-308PA-312PA-320PA-330PA-340PA-351PA-360PA-408PA-412PA-420PA-430PA-440PA-451PA-460PA-508PA-512PA-520PA-530PA-540PA-551PA-560PA-608PA-612PA-620PA-630PA-640PA-651PA-660PA-708PA-712PA-720PA-730PA-740PA-751PA-760
PAB-308PAB-312PAB-320PAB-330PAB-340PAB-351PAB-360PAE-308PAE-312PAE-320PAE-330PAE-340PAE-351PAE-360PAJ-308PAJ-312PAJ-320PAJ-330PAJ-340PAJ-351PAJ-360
PAA-B410PAA-G360PAA-R340PAA-R350PAA-S420PAA-B430PAA-O370PAA-O380PAA-B312PAA-B710PAA-B720PAA-O310PAA-O313PAA-Y311
PAD-18 PAD-19 PAD-20 PAD-21 PAD-22 PAD-26PAD-23PAD-2 PAD-3 PAD-4 PAD-6
BLD-18 BLD-19 BLD-20 BLD-21 BLD-26BLD-2 BLD-3 BLD-4
9
DISPLAY CONTENTS
FLOOR DISPLAY WALL DISPLAY
BL-308BL-312BL-320BL-330BL-340BL-351BL-360BL-408BL-412BL-420BL-430BL-440BL-451BL-460BL-508BL-512BL-520BL-530BL-540BL-551BL-560BL-608BL-612BL-620BL-630BL-640BL-651BL-660BL-708BL-712BL-720BL-730BL-740BL-751BL-760
BLB-308BLB-312BLB-320BLB-330BLB-340BLB-351BLB-360BLE-308BLE-312BLE-320BLE-330BLE-340BLE-351BLE-360BLJ-308BLJ-312BLJ-320BLJ-330BLB-340BLJ-351BLJ-360
BLA-B410BLA-G360BLA-R340BLA-R350BLA-S420BLA-B430BLA-O370BLA-O380
−−−−−−
Poly-ArmourCatalog No.
®
101010101010101010101010101055555554444444
55555555555555
1010101010101055555
101010101010101010101010101055555554444444
55555555555555
10101010101010
5555555
101010101010101010101010101055555554444444
555555555555555555555
101010101010101010101010101055555554444444
555555555555555555555
22222222
222
2
2222222
22222
101010101010101010101010101055555554444444555555555555555555555555555555555555555555
55555555
COILED TUBING
10
AGS coils are the same copper-brazed, double-walled, steel or copper nickel alloy tubing as used in our pre-made lines. When combined with AGS tube nuts and flaring tool, 25 foot lengths are an economical solution for shops that want to build their own lines, custom lengths or non-standard applications.
BRAKE LINE COIL3/16”3/16”
Description / Length
3/16" X 25'3/16" X 50'3/16" X 100'
Tube Nuts *Purchased Separately
BLF-10, 11, 12, 38, 39, 40, 41, 42, 47, 48, 49BLC-325
NANA
StandardCatalog No.
Use to fabricate 3/16" Domestic, European, Japanese, British, and adapter brake lines
PAC-325PAC-350
NA
Poly-ArmourCatalog No.
BRAKE LINE COIL
Description / Length
1/4" X 25'1/4" X 50'1/4" X 100'
Tube Nuts *Purchased Separately
BLF-13, 16, 43, 44BLC-425
NANA
StandardCatalog No.
CNC-325CNC-350
CNC-3100
NiCoppCatalog No.
CNC-425CNC-450CNC-4100
NiCoppCatalog No.
CNC-525CNC-5100
NiCoppCatalog No.
CNC-625CNC-6100
NiCoppCatalog No.
Use to fabricate 1/4" Domestic and adapter brake lines
PAC-425PAC-450
NA
Poly-ArmourCatalog No.
Description / Length
5/16" X 25'5/16" X 100'
Tube Nuts *Purchased Separately
BLF-14, FLR-009
Description / Length
3/8" X 25'3/8" X 100'
Tube Nuts *Purchased Separately
BLF-15, FLR-008
FUEL & TRANSMISSION LINE COIL
BLC-525NA
StandardCatalog No.
Use to fabricate 5/16" fuel and transmission lines
PAC-525NA
Poly-ArmourCatalog No.
FUEL & TRANSMISSION LINE COIL
BLC-625NA
StandardCatalog No.
Use to fabricate 3/8" fuel and transmission lines
PAC-625NA
Poly-ArmourCatalog No.
BRAKE LINE COIL
Description / Length
6mm X 25'
Tube Nuts *Purchased Separately
BLF-46, 51, 52, 53BLC-725
StandardCatalog No.
Use to fabricate 6mm GM and adapter brake lines
PAC-725
Poly-ArmourCatalog No.
1/4”1/4”
6mm6mm
5/16”5/16”
3/8”3/8”
25'50'100'
25'50'100'
25'100'
25'100'
25'
BRAKE LINE COIL KITS
Description / Length
BLC-325KBLC-425K
–BLC-525KBLC-625K
StandardCatalog No.
BLFA-8K/BLFA-8K-2BLFA-9KBLFA-10K
––
NiCoppCatalog No.
3/16"1/4"
3/16" & 1/4"5/16"3/8"
Steel Coil with Tube Nuts / 25' NiCopp Coil with Fitting Assortment (1 or 2 Coils)Steel Coil with Tube Nuts / 25' NiCopp Coil with Fitting Assortment
CNC-325 & CNC-425 Coils with BLFA-8 & BLFA-9 Fitting AssortmentsSteel Coil with Tube NutsSteel Coil with Tube Nuts
11
COPPER COILED TUBING
DiameterDescription
7/16"1/8"1/8"3/16"3/16"1/4"1/4"5/16"5/16"3/8"3/8"1/2"1/2"5/8"3/4"
Coil, Copper, 7/16 x 25 x 032Coil, Copper, 1/8 x 25 x 025Coil, Copper, 1/8 x 25 x 03Coil, Copper, 3/16 x 25 x 025Coil, Copper, 3/16 x 25 x 03Coil, Copper, 1/4 x 25 x 025Coil, Copper, 1/4 x 25 x 03Coil, Copper, 5/16 x 25 x 025Coil, Copper, 5/16 x 25 x 032Coil, Copper, 3/8 x 25 x 025Coil, Copper, 3/8 x 25 x 032Coil, Copper, 1/2 x 25 x 025Coil, Copper, 1/2 x 25 x 032Coil, Copper, 5/8 x 25 x 035Coil, Copper, 3/4 x 25 x 035
Gauge Length (feet)
0.0320.0250.030.0250.030.0250.030.0250.0320.0250.0320.0250.0320.0350.035
252525252525252525252525252525
AGS Part No.
CT-125-032CT-225CT-225-03CT-325CT-325-03CT-425CT-425-03CT-525CT-525-032CT-625CT-625-032CT-725CT-725-032CT-825-035CT-925-035
50' COPPER TUBING COIL
DiameterDescription
7/16"1/8"3/16"1/4"1/4"5/16"3/8"3/8"1/2"1/2"1/2"5/8"5/8"3/4"
Coil, Copper, 7/16 x 50 x 032Coil, Copper, 1/8 x 50 x 03Coil, Copper, 3/16 x 50 x 03Coil, Copper, 1/4 x 50 x 03Coil, Copper, 1/4 x 50 x 049Coil, Copper, 5/16 x 50 x 032Coil, Copper, 3/8 x 50 x 032Coil, Copper, 3/8 x 50 x 049Spool, Copper, 1/2 x 50 x 03Coil, Copper, 1/2 x 50 x 032Coil, Copper, 1/2 x 50 x 049Coil, Copper, 5/8 x 50 x 035Coil, Copper, 5/8 x 50 x 058Coil, Copper, 3/4 x 50 x 058
Gauge Length (feet)
0.0320.030.030.030.0490.0320.0320.0490.030.0320.0490.0350.0580.058
5050505050505050505050505050
AGS Part No.
CT-150-032CT-250-03CT-350-03CT-450-03CT-450-049CT-550-032CT-650-032CT-650-049CT-750-03CT-750-032CT-750-049CT-850-035CT-850-058CT-950-058
100' COPPER TUBING COIL
DiameterDescription
1/8"3/16"1/4"5/16"3/8"
Spool, Copper, 1/8 x 100 x 03Spool, Copper, 3/16 x 100 x 03Spool, Copper, 1/4 x 100 x 03Spool, Copper, 5/16 x 100 x 03Spool, Copper, 3/8 x 100 x 03
Gauge Length (feet)
0.030.030.030.030.03
100100100100100
AGS Part No.
CT-2100-03CT-3100-03CT-4100-03CT-5100-03CT-6100-03
For low pressure applications–not brake line
25' COPPER TUBING COIL
AGS Fittings are comprised of Tube Nuts, Unions (Couplers), and Adapters; used primarily in the automotive hydraulic braking, fuel, and transmission systems. Fittings are offered in a variety of packaging options, including: retail clam-shells, bulk boxed, and plastic tray assortments. The following provides guidelines for selecting and identifying fittings.
Tube nuts are used in all types of automotive hydraulic lines, including: brake, fuel, oil, and transmission. To make connection, place nut over the tubing with the threaded end pointed towards the end to be flared (repeat on other end of tube). The tube flare will be clamped between the nut and the flare seat when tightened.
Automotive hydraulic brake fittings are formed to work with either SAE Inverted Double Flare (Domestic and Japanese vehicles) or ISO Bubble Flare (European and British vehicles). In either case, the fitting (whether a Tube Nut, Union, or Adapter) must be selected to match the end form of the tube or port it will be mating to or a proper seal will not be possible.
The charts and diagrams on the left refer to the standard thread measures for the nominal tube sizes and how they are determined for both imperial and metric fittings. Non-standard thread sizes do exist for each of the nominal tube sizes however and this is only used as a guide. Example: BLF-41 has a tube size of 3/16" and a thread measure of 1/2-20.
Measuring Imperial Threads: Measure the O.D. of the threads and the number of threads in one inch.
Measuring Metric Threads: Measure the O.D. of the threads and the crest to crest distance (pitch) in millimeters between threads.
ISO Bubble Flare SAE Inverted Flare
TUBE NUTS
Standard UNF Imperial ThreadsNominalTube Size
3/16"
1/4"
5/16"
3/8"
3/8
7/16
1/2
5/8
24
24
20
18
3/8-24
7/16-24
1/2-20
5/8-18
Thread O.D.
ThreadsPer Inch
ThreadDescription
Standard Metric ThreadsDescriptionTube Size
Japanese 3/16"
European 3/16"
GM 6mm
Fuel 5/16"
Fuel 3/8"
10mm
10mm
12mm
14mm
16mm
1.0mm
1.0mm
1.0mm
1.5mm
1.5mm
M10 x 1.0
M10 x 1.0
M12 x 1.0
M14 x 1.5
M16 x 1.5
Thread O.D.
Crest(Pitch)
ThreadDescription
THREAD O.D.
TUBE SIZE
UNIONTUBE NUT
TUBE SIZE
# OF THREADSPER INCH
THREAD O.D.
CREST (PITCH)
Use for 3/16" Domestic brake lines.
Use for 3/16" Domestic adapter brake lines.
Use for 3/16" Domestic brake lines. BLPF-12 Black Oxide Coated – 10 per Bag
BLPF-13 Black Oxide Coated – 10 per Bag
BLPF-14 Black Oxide Coated – 10 per Bag
Use for 1/4" Domestic brake lines.
Use for 5/16" Domestic fuel and transmission lines.
121030
121034
121003
121004
121005
Edelmann
7896x3
NA
105x3
105x4
105x5
Weatherhead
BLF-10C-5
BLF-11C-5
BLF-12C-5
BLF-13C-5
BLF-14C-5
5 per CardFitting
BLF-10B
BLF-11B
BLF-12B
BLF-13B
BLF-14B
1 per Bag
BLF-10
BLF-11
BLF-12
BLF-13
BLF-14
10 per Bag
BLFX-10
BLFX-11
BLFX-12
BLFX-13
BLFX-14
100 per Box
3/16"
3/16"
3/16"
1/4"
5/16"
Tube Size
3/8-24 (Long) Inverted
7/16-24 Inverted
3/8-24 Inverted
7/16-24 Inverted
1/2-20 Inverted
Thread Size / Flare
UNIONTUBE NUT
Scan to view more information on the AGS automotive fittings program
Stee
lFITTINGS
12
13
FITTINGS
TUBE NUTS (Continued)
Fitting
Use for 3/16" European brake lines.
Use for 3/16" Japanese brake lines.
Use for 3/16" Domestic adapter brake lines.
Use for 3/16" Domestic adapter brake lines.
Use for 1/4" Domestic adapter brake lines.
Use for 1/4" Domestic adapter brake lines.
Use for 6mm Import adapter brake lines.
Use for 3/16" Import adapter brake lines.
Use for 3/16" Import adapter brake lines.
Use for 3/16" Import adapter brake lines.
Use for 6mm GM brake lines.
Use for 6mm GM adapter brake lines.
Use for 6mm GM adapter brake lines.
Use for 3/8" Domestic fuel lines.
Use for 5/16" Domestic fuel lines.
Use for 3/16" British brake lines.
Use for 3/8" Domestic fuel and transmission lines. BLPF-15 Black Oxide Coated – 10 per Bag
BLPF-38 Black Oxide Coated – 10 per Bag
BLPF-39 Black Oxide Coated – 10 per Bag
BLPF-40 Black Oxide Coated – 10 per Bag
Use for 1/4" Domestic brake lines.
5 per Card
BLF-39C-5
BLF-40C-5
BLF-41C-5
BLF-42C-5
BLF-43C-5
BLF-44C-5
BLF-46C-5
BLF-47C-5
BLF-48C-5
BLF-49C-5
BLF-51C-5
BLF-52C-5
BLF-53C-5
FLR-008C
FLR-009C
BLF-16C-5
BLF-15C-5
BLF-38C-5
1 per Bag
BLF-39B
BLF-40B
BLF-41B
BLF-42B
BLF-43B
BLF-44B
BLF-46B
BLF-47B
BLF-48B
BLF-49B
BLF-51B
BLF-52B
BLF-53B
FLR-008B
FLR-009B
BLF-16B
BLF-15B
BLF-38B
10 per Bag
BLF-39
BLF-40
BLF-41
BLF-42
BLF-43
BLF-44
BLF-46
BLF-47
BLF-48
BLF-49
BLF-51
BLF-52
BLF-53
FLR-008
FLR-009
BLF-16
BLF-15
BLF-38
100 per Box
BLFX-39
BLFX-40
BLFX-41
BLFX-42
BLFX-43
BLFX-44
BLFX-46
BLFX-47
BLFX-48
BLFX-49
BLFX-51
BLFX-52
BLFX-53
FLRX-008
FLRX-009
BLFX-16
BLFX-15
BLFX-38
Thread Size / Flare
M10 x 1.0 Bubble
M10 x 1.0 Inverted
1/2-20 Inverted
9/16-18 Inverted
9/16-18 Inverted
1/2-20 Inverted
M12 x 1.0 Bubble
M11 x 1.5 Bubble
M12 x 1.0 Bubble
M13x 1.5 Bubble
M12 x 1.0 Bubble
M12 x 1.5 Bubble
M14 x 1.5 Bubble
M16 x 1.5 Surface Seal
M14 x 1.5 Surface Seal
7/16-24 (Long) Inverted
5/8-18 Inverted
3/8-24 Bubble
Edelmann
276110
121050
NA
121039
121049
121045
NA
276011
276012
276013
NA
NA
NA
121070
121069
121040
121006
NA
Weatherhead
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
7896x4
105x6
NA
Stee
l
FITTINGS
14
Unions are used to join two brake, fuel, or transmission lines together. This may be needed, for example, in long runs from the dual master cylinder to the rear axle. Match the thread and flare type to the lines being connected. It is important that both flare type and thread match for a leak-proof connection.
Use for joining 3/16" Domestic brake lines.
UNIONS
Compression unions are used in low pressure application such as: air, oil, and water. They are generally used to connect lengths of copper, brass, and aluminum tubing. To make connection, place the nut and then the sleeve over the tubing and then insert tube into the fitting body. When tight, the wedging action of sleeve between body and nut create a leak free connection.
COMPRESSION UNIONS
Use for joining 1/4" Domestic brake lines.
Use for joining 5/16" fuel and transmission lines.
Use for joining 3/8" fuel and transmission lines.
Use for joining 3/16" British brake lines.
Use for joining 3/16" European brake lines.
Use for joining 3/16" Japanese brake lines.
Use for joining 6mm GM brake lines.
Use for joining 3/16" copper, brass, or aluminum tubing in low-pressure applications (NOT brake lines).
Use for joining 1/4" copper, brass, or aluminum tubing in low-pressure applications (NOT brake lines).
Use for joining 1/8" copper, brass, or aluminum tubing in low-pressure applications (NOT brake lines).
Use for joining 5/16" copper, brass, or aluminum tubing in low-pressure applications (NOT brake lines).
Use for joining 3/8" copper, brass, or aluminum tubing in low-pressure applications (NOT brake lines).
Use for joining 1/2" copper, brass, or aluminum tubing in low-pressure applications (NOT brake lines).
123300
123400
123500
123600
275300
276000
274000
NA
Edelmann
302x3
302x4
302x5
302x6
1594
7975
7934A
NA
Weatherhead
BLU-3C
BLU-4C
BLU-5C
BLU-6C
BLU-7C
BLU-8C
BLU-9C
BLU-10C
1 per CardFitting
BLU-3B
BLU-4B
BLU-5B
BLU-6B
BLU-7B
BLU-8B
BLU-9B
BLU-10B
1 per Bag
BLU-3
BLU-4
BLU-5
BLU-6
BLU-7
BLU-8
BLU-9
BLU-10
10 per Bag
BLUX-3
BLUX-4
BLUX-5
BLUX-6
BLUX-7
BLUX-8
BLUX-9
BLUX-10
100 per Box
3/16"
1/4"
5/16"
3/8"
3/16"
3/16"
3/16"
6mm
Tube Size
3/8-24 Inverted
7/16-24 Inverted
1/2-20 Inverted
5/8-18 Inverted
3/8-24 Bubble
M10 x 1.0 Bubble
M10 x 1.0 Inverted
M12 x 1.0 Bubble
Thread Size / Flare
162300
162400
162500
162600
162200
162800
Edelmann
62 x 3
62 x 4
62 x 5
62 x 6
62 x 2
62 x 8
Weatherhead
CF-1
CF-2
CF-3
CF-4
CF-0
CF-5
1 per CardFitting
CF-1B
CF-2B
CF-3B
CF-4B
CF-0B
CF-5B**
1 per Bag
CFB-1
CFB-2
CFB-3
CFB-4
CFB-0
CFB-5***
10 per Bag
CFX-1
CFX-2
CFX-3
CFX-4
CFX-0
CFX-5*
100 per Box
3/16"
1/4"
5/16"
3/8"
1/8"
1/2"
Tube Size
NA
NA
NA
NA
NA
NA
Thread Size / Flare
Not foruse withBrakingSystems
Stee
lBr
ass
Bras
sBr
ass
* CFX-5 available in quantities of 10 per box only. **CF-5B available in quantities of 5 per box only. ***CFB-5 available in quantities of 5 per bag only.
15
FITTINGS
Edelmann WeatherheadQty Qty Tube Size Thread Size / Flare Material
Use for adapting a 1/2-20 Inverted port to a 3/8" Domestic fuel line.
Use for adapting a 1/2-20 Inverted port to a 1/4" Domestic brake line.
Use for adapting a 1/2-20 Inverted port to a 3/16" Domestic brake line.
Use for adapting a 9/16-18 Inverted port to a 5/16" Domestic fuel line.
Use for adapting a 7/16-24 Inverted port to a 3/16" Domestic brake line.
Use for adapting a 3/8-24 Inverted port to a 1/4" Domestic brake line.
Use for adapting a 5/8-18 Inverted port to a 5/16" Domestic fuel line.
Use for adapting a 9/16-18 Inverted port to a 1/4" Domestic brake line.
Use for adapting a 1/2-20 Inverted port to a 9/16-18 Inverted connection.
Use for adapting a 9/16-20 Inverted port to a 3/16" Domestic brake line.
Use for adapting a 9/16-18 Inverted port to a 3/16" Domestic brake line.
Use for adapting a Japanese port to a 3/16" Domestic brake line.
Use for adapting a British port to a 3/16" Domestic brake line.
Use for adapting a European port to a 3/16" Domestic brake line.
Use for adapting a Metric Bubble port to a 3/16" Domestic brake line.
BRAKE ADAPTER FITTINGS
Use for adapting a 7/16-24 Inverted port to a 5/16" Domestic fuel line.
Use for adapting a Metric Bubble port to a 3/16" Domestic brake line.
Adapter fittings are generally used to allow connection of standard brake lines to the different sized ports used in dual master cylinders. Simply match the male side of the adapter to the port connection on the dual master cylinder and the female side of the adapter to the brake line connection to be made.
258450
258307
258430
258403
258303
270300
271300
265000
258540
258650
258350
258340
258560
258306
258302
272330
264000
Edelmann
7829
7913
7828
7908
7910
1443
1442
7974
7917
7915
7909
7818
7916
7912
7911
1441
7973
Weatherhead
BLF-19C
BLF-21C
BLF-23C
BLF-25C
BLF-27C
BLF-29C
BLF-31C
BLF-33C
BLF-17C
BLF-18C
BLF-20C
BLF-22C
BLF-24C
BLF-26C
BLF-28C
BLF-30C
BLF-32C
1 per CardFitting
BLF-19B
BLF-21B
BLF-23B
BLF-25B
BLF-27B
BLF-29B
BLF-31B
BLF-33B
BLF-17B
BLF-18B
BLF-20B
BLF-22B
BLF-24B
BLF-26B
BLF-28B
BLF-30B
BLF-32B
1 per Bag
BLF-19
BLF-21
BLF-23
BLF-25
BLF-27
BLF-29
BLF-31
BLF-33
BLF-17
BLF-18
BLF-20
BLF-22
BLF-24
BLF-26
BLF-28
BLF-30
BLF-32
10 per Bag
BLFX-19
BLFX-21
BLFX-23
BLFX-25
BLFX-27
BLFX-29
BLFX-31
BLFX-33
BLFX-17
BLFX-18
BLFX-20
BLFX-22
BLFX-24
BLFX-26
BLFX-28
BLFX-30
BLFX-32
100 per Box
7/16-24 Inverted
1/2-20 Inverted
7/16-24 Inverted
7/16-24 Inverted
3/8-24 Inverted
3/8-24 Inverted
3/8-24 Inverted
3/8-24 Inverted
1/2-20 Inverted
5/8-18 Inverted
3/8-24 Inverted
3/8-24 Inverted
1/2-20 Inverted
9/16-18 Inverted
3/8-24 Inverted
3/8-24 Inverted
3/8-24 Inverted
Female
1/2-20 Inverted
9/16-18 Inverted
3/8-24 Inverted
9/16-18 Inverted
9/16-20 Inverted
M10 x 1.0 Inverted
M10 x 1.0 Bubble
M12 x 1.0 Bubble
7/16-24 Inverted
1/2-20 Inverted
1/2-20 Inverted
7/16-24 Inverted
5/8-18 Inverted
1/2-20 Inverted
9/16-18 Inverted
3/8-24 Bubble
M11 x 1.5 Bubble
Male
Bras
s
FITTINGS
16
Use for adapting a Metric Bubble port to a 3/16" Japanese brake line.
Use for adapting a GM 6mm port to a 3/16" Japanese brake line.
Use for adapting a Metric Bubble port to a 3/16" Japanese brake line.
Use for adapting a Metric Inverted port to a 3/16" British brake line.
Use for adapting a Metric Bubble port to a 3/16" Domestic brake line.
Use for adapting a 7/16-20 Bubble port to a 3/16" British brake line.
Male elbow for 3/16" brake line
Male branch tee for 3/16" brake line
Male connector for 3/16" brake line
Union tee for 3/16" brake line
Plug for 3/16" brake line
263000
NA
NA
122320
228200
120300
NA
NA
NA
124320
130333
Edelmann
7972
7936
NA
402 x 3
3600 x 2
NA
7935
7937
NA
202 x 3
702 x 3
Weatherhead
BLF-34C
BLF-36C
BLF-54C
BLF-56C
BLF-58C
BLF-60C
BLF-35C
BLF-37C
BLF-55C
BLF-57C
BLF-59C
1 per CardFitting
BLF-34B
BLF-36B
BLF-54B
BLF-56B
BLF-58B
BLF-60B
BLF-35B
BLF-37B
BLF-55B
BLF-57B
BLF-59B
1 per Bag
BLF-34
BLF-36
BLF-54
BLF-56
BLF-58
BLF-60
BLF-35
BLF-37
BLF-55
BLF-57
BLF-59
10 per Bag
BLFX-34
BLFX-36
BLFX-54*
BLFX-56
BLFX-58
BLFX-60
BLFX-35
BLFX-37
BLFX-55
BLFX-57
BLFX-59
100 per Box
3/8-24 Inverted
M10 x 1.0 Inverted
3/8-24 Bubble
3/8-24 Inverted
3/8-24 Inverted
NA
M10 x 1.0 Inverted
M10 x 1.0 Inverted
3/8-24 Bubble
3/8-24 Inverted
3/8-24 Inverted
Female
M13 x 1.5 Bubble
M12 x 1.0 Bubble
M9 x 1.0 Inverted
1/8" NPTF
1/8" NPTF
3/8-24 Inverted
M11 x 1.5 Bubble
M13 x 1.5 Bubble
7/16-20 Bubble
1/8" NPTF
NA
Male
BRAKE ADAPTER FITTINGS (Continued)
BRAKE SYSTEM CONNECTION DIAGRAM
The diagram is simplified to show how the connection from master cylinder to the wheel cylinder is made. Two options for adapting the different sized ports on the master cylinder (1/2-20) to a standard 3/16" domestic brake system (3/8-24) are shown. One uses a simple adapter fitting (BLF-20) while the other uses an 8" adapter line (BLA-R350) and a union (BLU-3). Both are good solutions and accomplish the same objective.
REARWHEEL CYLINDER
FLEXIBLEBRAKEHOSE
FLEXIBLEBRAKEHOSE
FRONTWHEEL CYLINDER
MASTER CYLINDER
BLU-3UNION3/8-24
BLU-3UNION3/8-24
BLA-R3501/2-20 TO 3/8-24
1/2-20INVERTED
PORT
BLF-201/2-20 TO 3/8-24
BL-308DOMESTIC
BRAKE LINE
Bras
sSt
eel
Bras
s
* BLFX-54 available in quantities of 10 per box only.
Use for adapting a GM 6mm port to a 3/16" British brake line. NA NABLF-61C BLF-61BBLF-61 BLFX-61 3/8-24 Bubble M12 x 1.0 Bubble
17
FITTING ASSORTMENTS
ASSORTMENT DESCRIPTIONSAGS Fitting Assortments are designed for the specialty and general repair shops. Each assortment contains a specific collection of fast moving fittings that should be kept on hand when working with automotive hydraulic braking systems. Assortments are packaged in shatter-resistant, see-through plastic trays. Locator labels on the inside lid make locating, selecting, and re-filling quick and easy.
BLFA-1 Tube Nut Assortment - 9 SKU Includes nine specialized tube nuts used in 8" brake adapter lines for connecting different sized port openings on master cylinders to standard brake systems. Contains both SAE Inverted and ISO Bubble tube nuts as well as UNF Imperial and Metric threads.
BLFA-3 Master Cylinder Adapter Assortment - 18 SKU A complete master cylinder adapter assortment for converting different sized port opening on master cylinders to standard braking systems. Adapters are included for converting from non-standard UNF imperial threads to standard 3/16", 1/4", 5/16" and 3/8" brake, fuel, and transmission systems. Also convert domestic systems to import systems and vice-versa.
BLFA-4 Master Cylinder Adapter Assortment - 9 SKU Nine of the most popular master cylinder adapters for Domestic vehicles. Adapt different sized port openings on master cylinders to standard 3/16" and 1/4" Domestic brake systems. Also includes adapters for converting between 5/16" and 3/8" port sizes.
BLFA-5 Large Fitting Assortment - 24 SKU An assortment of 24 most popular Tube Nuts, Unions, and Adapters for most repair shops. Includes Tube Nuts for all Domestic applications, as well as 6mm and Japanese. Also includes Unions for 3/16" and 1/4" Domestic, Japanese and European vehicles. Popular adapters include European to Domestic and Japanese to Domestic. Also included are non-standard Tube Nuts for adapter line applications.
BLFA-2 Metric Fitting Assortment - 9 SKU Assortment of nine most popular metric fittings (tube nuts, unions, and adapters) for use when working with braking systems of Japanese and European vehicles.
FITTING ASSORTMENTS
18
ASSORTMENT DESCRIPTIONS (Continued)
BLFA-9 Fitting Assortment - 8 SKUAn assortment that contains tube nuts, adapters, and unions for working with all types of domestic and import 1/4" diameter brake line systems.
CFA-1 Compression Union Assortment - 6 SKUAn assortment that contains 1/8", 3/16", 1/4", 5/16", 3/8", and 1/2" compression unions for joining copper, brass, or aluminum tubing in low-pressure applications (not for use in braking systems).
BLD-27 Carded Fitting Assortment Includes 20 of the most popular Unions and Brake Adapter Fittings. All fittings are carded, one fitting per clamshell. Rack is designed to fit in front of AGS Steel Line floor display. Display can also be wall-mounted separately.
BLD-29 and PAD-29 – Wall Display (No Fittings)
BLFA-9K – see page 10
BLFA-8 Fitting Assortment - 24 SKU An assortment that contains tube nuts, adapters, and unions for working with all types (domestic, import, 6mm) of 3/16" diameter brake line systems.
BLFA-8K – see page 10
BLFA-6 Large Fitting Assortment - 18 SKU An assortment of 18 Tube Nuts, Unions, and Adapters for any repair shop and especially those working on import vehicles. Includes Tube Nuts for all Import brake applications, as well as 3/16" Domestic. Also includes Unions for British and GM 6mm. Adapters include a 6mm to 3/16" Domestic brake system.
BLFA-7 Union Assortment - 8 SKU An assortment of 8 brass unions for joining all types of brake and fluid transfer lines: Domestic 3/16", 1/4", 5/16, 3/8", Japanese, European, British, and 6mm.
19
FITTING ASSORTMENTS
ASSORTMENT CONTENTSASSORTMENTS
FittingPart No.
BLF-10BLF-11BLF-12BLF-13BLF-14BLF-15BLF-16BLF-17BLF-18BLF-19BLF-20BLF-22BLF-23BLF-24BLF-25BLF-27BLF-28BLF-29BLF-30BLF-31BLF-32BLF-33BLF-34BLF-35BLF-36BLF-38BLF-39BLF-40BLF-41BLF-42BLF-43BLF-44BLF-47BLF-48BLF-49BLF-51BLF-52BLF-53BLU-3BLU-4BLU-5BLU-6BLU-7BLU-8BLU-9BLU-10
CF-0CF-1CF-2CF-3CF-4CF-5
FLR-008FLR-009
BLFA-1
5
5
5555555
BLFA-2
5
2
55
555
22
BLFA-3
222222222222222222
BLFA-4
222222222
BLFA-6
10
10
555
5555
101010
555
22
2
BLFA-7
22222222
BLFA-8
101020
11
11212111
2121266
444
4
22
BLFA-9
4
4
2
2
2
44
4
BLD-27
5*5*5*5*5*5*5*5*5*5*5*5*5*
5*5*5*5*5*5*5*
CFA-1
2104222
BLFA-5
10101010
10
5
555
105555555
555
55
22
20
OIL DRAIN PLUGS
Easy InstallFinger-grip wing foreasy of installation.
All plugs have 14mm hex – just one wrench
works for all!
Hi-Temp GasketRed hi-temp gasket formax sealing protection
Rust ProtectionBlack oxide coating for rust and corrosion protection
Avoid Cross-ThreadingPilot-point tip to avoid cross-threading during installation
Easy IDThread size etched on each plug
1986-2012 ACURA, 1977-79 AMC, 1973-92, 1995-2012 AUDI, 1982-1988 BUICK, 1997-2001,2003-04 CADILLAC, 1976-2010 CHEVY, 1983-85, 1987-2012 CHRYSLER, 1978-2012 DODGE,1989-98 EAGLE, 2012 FIAT, 1971-2012 FORD, 1989-98 GEO, 1982-85, 2001-10 GMC TRUCK,1983-2012 HONDA, 1987-2012 HYUNDAI, 1981-2004 ISUZU, 1997-98, 2000-09 JAGUAR,1999-2012 JEEP, 1994-2012 KIA, 2003-08 LAND ROVER, 1977-79, 1982, 1988-2012 LINCOLN,1971-2012 MAZDA, 1974-2012 MERCEDES-BENZ, 1971-2011 MERCURY, 1985-89 MERKUR,1983-2012 MITSUBISHI, 1982-88 OLDSMOBILE, 1978-2001 PLYMOUTH, 1982-94,2009-10 PONTIAC, 1980-2009 SAAB, 2000-05, 2008 SATURN, 1989-2008 SUZUKI,1968-2012 VOLKSWAGEN
1983-84 AMC, 1988-89 EAGLE, 1990-2010 FORD TRUCK, 1984-91 JEEP
M14 X 1.5ODP-00007(B or C*)
ODP-00008(B or C)
ODP-00009(B or C)
ODP-00010(B or C)
ODP-00011(B or C)
ODP-00012(B or C)
ODP-00013(B or C)
ODP-00014(B or C)
ODP-00015(B or C)
ODP-00016(B or C)
ODP-00017(B or C)
ODP-00018(B or C)
ODP-00019(B or C)
M14 X 1.25
M12 X 1.75
M12 X 1.5
M12 X 1.25
M16 X 1.5
M18 X 1.5
M22 X 1.5
M26 X 1.5
1/2-20
5/8-18
3/4-16
M20 X 1.5
1968-2012 BMW, 1984 LINCOLN, 1972-2002, 2004-12 MERCEDES-BENZ
1982-85 CHRYSLER, 1971-82, 1990-93, 2002-06 DODGE, 1976-86 PLYMOUTH, 1972-73 SUBARU,1974-92 TOYOTA, 1992-2012 VOLVO
1968-83, 1994-95 BMW, 1999 CADILLAC, 1981-2000 CHEVROLET, 1980-89, 1991-2001 DODGE,1980-86 FORD, 1981-2000 GMC, 1980-96 JEEP, 1994, 1996-97 OLDSMOBILE, 1980-81 PLYMOUTH,1971 SUBARU
1990-99 AUDI, 1961-89 MERCEDES-BENZ, 1993, 1995 VOLKSWAGEN, 1970-75, 1980-87 VOLVO
1964-88 AMC, 1959-96 BUICK, 1966-96 CADILLAC, 1968-82 CHECKER, 1946-96 CHEVROLET,1962-99 CHRYSLER, 1961-2006 DODGE, 1993-97 EAGLE, 1954-96 FORD, 1950-96 GMC,1992-2000 HUMMER, 1968-80 INTERNATIONAL, 1968-2006 JEEP, 1957-78, 1980-90 LINCOLN,1957-90 MERCURY, 1998-99 MITSUBISHI, 1961-94 OLDSMOBILE, 1961-99 PLYMOUTH,1946-95 PONTIAC
1950-65 CADILLAC, 1990-95 CHEVROLET, 1959-61 CHRYSLER, 1959-63 DODGE,1959-63 PLYMOUTH
1958-63 AMC, 1982-85, 1988-95, 2000 CHRYSLER, 1978-2001 DODGE, 1978-2000 PLYMOUTH,1976-79, 1983-95, 1998 VOLVO
1972-75, 1981-82 CHEVROLET, 1983-86 DODGE, 1970-83 HONDA, 1987 ISUZU,1983-86 PLYMOUTH, 1973-2012 SUBARU
1990-92 DODGE, 1988-92 EAGLE, 1971-96 JAGUAR, 1974-91 PEUGEOT, 1977-87 RENAULT,1976-79 VOLVO
1985-88, 1998-2002 CHEVY, 1989-97 GEO, 1990-2012 INFINITI, 1990-2012 LEXUS,1993-2002 MERCURY, 1982-2012 NISSAN, 2003-10 PONTIAC, 2004-12 SCION, 1985 SUZUKI,1985-2012 TOYOTA
1980-83 AMC, 1979-2012 BUICK, 1982-2012 CADILLAC, 1979-2012 CHEVY, 1995-2012 FORD,1985-2012 GMC TRUCK, 2003-10 HUMMER, 1991-94, 1996-2000, 2003-08 ISUZU TRUCK,1980-84 JEEP, 2000-12 LINCOLN, 1996-2012 MAZDA, 1995-2011 MERCURY,1979-2004 OLDSMOBILE, 1979-2010 PONTIAC, 1991-2010 SATURN
Part Number Size Application
* Packaging Options: B - Bagged single plug, C - Clamshell carded single plug
AGS ACCUFIT™ Oil Drain Plugs is a high-coverage/low-part number program that covers up to 93% of all vehicles on the road, including domestic, European, Japanese, British, and Korean models, while reducing inventory and associated costs by 80%. Reducing stocked part numbers to just 13 and the superior quality built-in features make ACCUFIT™ your number one choice for oil drain plugs.
Scan to view an instructional video and to visit the mobile drain plug application selector.
Refer to the ACCUFIT™ Application Guidebook (C-1000) or mobile selector application for a comprehensive listing drain plug part numbers and the corresponding year/make/model table for quick and easy selection.
21
OIL DRAIN PLUG GASKETS
OIL DRAIN PLUG REPLACEMENT GASKETS
15 OE-style replacement gaskets for the most popular OE-style oil drain plugs. Allows easy replacement of worn or damaged oil drain plug gaskets. Many applications/sizes available in copper, rubber, nylon, aluminum, metal, and synthetic gasket materials.
Package Quantity: Bag of 10 Gaskets
M14 Copper3/Carded Clamshell5/Bag
ODP-65268(B or C*)
9/16" / M14 Metal/Rubber
1/Carded Clamshell5/Bag
ODP-65269(B or C)
1/2" / M12 Nylon5/Carded Clamshell5/Bag
ODP-65270(B or C)
1/2" / M12 Copper2/Carded Clamshell5/Bag
ODP-65271(B or C)
9/16" / M14 Nylon5/Carded Clamshell5/Bag
ODP-65272(B or C)
5/8" Copper2/Carded Clamshell5/Bag
ODP-65273(B or C)
1/2" / M12 Metal/Rubber
2/Carded Clamshell5/Bag
ODP-65274(B or C)
M12 Aluminum2/Carded Clamshell5/Bag
ODP-65290(B or C)
Part Number Size Material Pkg Qty
*Packaging Options: B - Bag, C - Carded Clamshell
Part Number Size Material Pkg Qty
ODP-65292(B or C)
ODP-65301(B or C)
ODP-65310(B or C)
ODP-65311(B or C)
ODP-65327(B or C)
ODP-65330(B or C)
ODP-66451(B or C)
M14
M12
1/2" / M14
M20
7/16" / M12
1/2" / M12
M12
Aluminum
Synthetic
Oversize/Crush
Crush
Rubber
Nylon
Rubber
4/Carded Clamshell5/Bag
2/Carded Clamshell5/Bag
3/Carded Clamshell5/Bag
2/Carded Clamshell5/Bag
22.80mm ODP-00007 and ODP-00008ODP-10007
20.80mm ODP-00009, ODP-00010,ODP-00011 and ODP-00016ODP-10009
24.80mm ODP-00012 and ODP-00017ODP-10012
26.80mm ODP-00013 and ODP-00018ODP-10013
Part Number Size Replacement Part Number Size Replacement
ODP-10014
ODP-10015
ODP-10019
30.80mm
34.80mm
28.80mm
ODP-00014
ODP-00015
ODP-00019
2/Carded Clamshell5/Bag
5/Carded Clamshell5/Bag
2/Carded Clamshell5/Bag
ODPA-1 OIL DRAIN PLUG ASSORTMENT - 24 SKU
22
BRAKE AND FUEL LINE WRENCH
More Grip...Less Slip. The corners of this revolutionary wrench head act like spring hinges to grab and tighten around the rounded, chewed-up, corroded, worn, and/or under-sized hex surfaces of brake and fuel fittings.
Features• Removes even the most worn brake & fuel fittings• Works where other flare nut wrenches fail• Easy access to the tight areas fittings are found• ‘Spring-Torque’ provides amazing grip• Chrome molybdenum black oxide wrench heads
FF10
FF11
FF1213
FF14
FF204
Fits 3/8" (10mm)
Fits 7/16" (11mm)
Fits 1/2" (12/13mm)
Fits 9/16" (14mm)
ALL 4 Sizes
Description
FF10 FF11 FF1213
Product
FF204
BRAKE AND FUEL LINE WRENCH .
TM
BY
FF14
See the video!
SPECIALTY TOOLS
The ODPA-1, Oil Drain Plug Assortment, includes all 13 ACCUFIT™ oil drain plugs that covers up to 93% of all vehicles on the road. Also included is an assortment of the 11 most popular OE-style gaskets. Pair the ODPA-1 with the ACCUFIT™ Oil Drain Plug Application Guidebook (C-1000) for quick and easy selection.
“The kit has worked for every car I needed to replace a plug in.” ~ ACCUFIT™ Customer
REPAIR PLUGS
Repair oil drain plugs offer a fast and inexpensive solution to stripped oil drain pan plug threads (oil pan replacement can cost up to $1,000 or more). Using a universal or oversize design allows a temporary or permanent repair if the threads in the pan are too ruined for a standard OE size plug.
Package Quantity: 1/Carded Clamshell, 1/Bag
ODP-65213(B or C)
M12 x 1.75Oversize
Part Number Size Part Number Size
1/2"Universal
5/8"Universal
ODP-65200(B or C)
1/2"Oversize
ODP-65204(B or C)
ODP-65201(B or C)
ODP-65217(B or C)
ODP-65240(B or C)
M14 x 1.5Oversize
WingedUniversal
• Remove worn and
corroded fittings
with ease
• Fits in tight spots
• The harder you push,
the more it grips!
Keys to Innovation:
SPECIALTY TOOLS
Single Bubble Inverted
FF-1
ON-VEHICLE FLARING! The FlareForce™ is everything you need to ensure professional quality flares every time in the convenience of an all-in-one design — LIGHTNING FAST! Produce on-the-fly flares with no loose parts and no need for a vise. FlareForce™ self-centers over the tube to provide accurate flares. A quick release allows easy insertion and removal of tubing. One-handed operation with trigger control allows flaring on already tubing that’s already installed.
Features• Create high-quality flares in seconds — single, bubble and inverted• Will work with 3/16", 1/4", 5/16", 3/8" tubing — steel, PolyArmour® and NiCopp®
• Also works with copper, aluminum and brass
23
Three Times Gripping Surface. The Hexforce™ “Butterfly Wrench” provides a full wrap-around gripping surface that open-end wrenches cannot... even on captive fittings where sockets don’t work. Perfect for chassis, suspension, alignment, and tube nuts.
Features• Unique pivot/hinge/clamp action for 360˚ contact• Won’t slip off even the most damaged hex surface like open-end wrenches• Socket-like gripping on captive fittings• Attaches to standard 1/2" or 3/8" ratchet drive• Other sizes also available
360º
CONTACT
TIGHT GRIP DUAL SIZES1/2" or 3/8"
SQUARE DRIVE
*Can be purchased separately (reference available sizes below).
HF-10
HF-11
HF-12
HF-14
HF-16
HF-17
10mm (3/8)
11mm (7/16)
12/13mm (1/2)
14mm (9/16)
16mm (5/8)
17/18mm (11/16)
DescriptionProduct
HF-19
HF-21
HF-23
HF-27
HF-30
HF-32
19/20mm (3/4)
21/22mm (3/16-7/8)
23/24mm (15/16)
27mm (1-1/16)
30mm (1-/16)
32mm (1-1/4)
DescriptionProduct
See the video!
See the video!
HF-23* HF-21* HF-19*
HFK-2
HF-17* HF-16*
IN-LINE FLARING TOOLTM
IN-LINE FLARING TOOL • BY
HFK-2 WRENCH SET 5PCTM
360º WRAP-AROUND WRENCH • BY TM
• A perfect flare in less
than 10 seconds!
• Pneumatic operation
• Single, double, and bubble
flares
Keys to Innovation:
• For hard-to-reach tube fittings• Doesn’t slip off damaged fitting• Use your existing wrench!
Keys to Innovation:
SPECIALTY TOOLS
24
The AGS Brake Line Fitting Gauges come in both SAE/Inch and ISO/Metric versions. The Brake Line Fitting Gauge is an accurate and easy-to-use thread checker for the most common thread sizes found in automotive braking systems. Conveniently assembled onto a wire loop, it is especially well suited for distinguishing between similar inch and metric threads. This tool is a great addition for Auto, Motorcycle, Marine, ATV or RV Repair Shops.
BRAKE LINE FITTING GAUGES
• 1/8" NPTF• 1/4" NPTF• 3/8-24• 7/16-20• 7/16-24• 1/2-20• 9/16-18• 9/16-20• 5/8-18
Thread Gauge Sizes
Female Checker Male Checker
BLFG
-UN
FSA
E/In
ch B
rake
Fitt
ing
Gau
geBL
FG-M
ETM
etric
Bra
ke F
ittin
g G
auge
male checker
female checker
inch metric
Features
• Each size has a male and female end checker on the same gauge.
• Thread sizes are permanently stamped onto each gauge.
• Inch gauges are clear zinc plated, metric gauges are black oxide.
• A wire cable with plastic coated loop at each end provides convenient hanging in many locations.
• Each gauge rotates freely on the wire cable for quick and easy thread verification.
Thread Gauge Sizes
• M16 x 1.5• M14 x 1.5• M13 x 1.0• M12 x 1.5• M12 x 1.0• M11 x 1.5• M10 x 1.0• M9 x 1.0
Coated wirecable loop
Gauges freelyrotate on the
wire cable
25
SPECIALTY TOOLS
Designed and patented in Europe and already a huge seller there. The innovative design of the Line Wrench is a must have for any professional mechanic. The Line Wrench makes fast work of troublesome fittings.
Features• Unique patented ratcheting function• Open and close wrench head with single-handed operation• Fits completely around the hex of the nut• Works on rounded and corroded tube nuts• More pressure applied to tool makes for tighter grip on nut• SAE and metric sets available, as well as individual• Double-ended wrenches or open-end on opposite side
Another unique and popular innovation direct from Europe is the Nut Driver Pro. The Nut Driver Pro makes getting to hard to reach hex screws a much less painful experience. Great for hose clamps.
Features• Grips hex screws in confined, hard to reach places• Unique tensioning and lock mechanisms• Allows single-handed operation — engage, grip, work, disengage• No-slip grip handle• Fixed length shafts available for 6mm, 7mm, 1/4", & 5/16" hex sizes• Flexible shafts available for 7mm, 1/4", and 5/16" hex sizes
FIXE
D L
ENG
TH S
HAF
T
FLEX
IBLE
SH
AFT
NDP7-190
NDP7-290
NDP6-290
NDP1/4-290
NDP5/16-290
NDP7-500
NDP7-SUPRAFLEXI
NDP5/16-SUPRAFLEXI
NDP1/4-SUPRAFLEXI
RATCHETING FLARE NUT WRENCH
LOCKING NUT DRIVER
• Ratcheting action on
worn and corroded fittings
• Faster on and off!
• Single-handed operation
Keys to Innovation:
LINE WRENCH
NUT DRIVER PRO
LW0809FLEX LW32OPEN
LW27OPEN
LW24OPEN
LW22OPEN
LW19OPEN
LW17OPEN
LW51638FLEX
LW1011FLEX
LW71612FLEX
LW1213FLEX
LW1415FLEX
LW91658FLEX
LW1617FLEX
LW1819FLEX
LW111634FLEX
• Grips hex screws where
no other tool can reach
• Locks on and holds tight!
• Perfect for hard to
reach clamps
Keys to Innovation:
SPECIALTY TOOLS
26
Repairing fuel systems involving quick disconnects and nylon fuel hose has always been a slow and difficult process. Heating the hose in hot water and trying to jam the barb into the hose without damage is slow and tedious.
The Nylon Fuel Repair kit for KLEDGE-LOK™ can now assemble both straight and angled quick disconnects into nylon fuel hose quickly and perfectly every time. Setup is fast and easy. The KLEDGE-LOK™ tool does the rest.
ON-VEHICLE REPAIR• Build your own nylon lines
in minutes
• Uses Kledge-Lok tool
for virtually no-effort
repairs
• Quick connectors, splices,
and more!
Keys to Innovation:
NYLON FUEL REPAIR
SLKFR
The KLEDGE-LOK™ tool is designed to complete most line repairs right on the vehicle by reaching into, behind, and underneath the difficult places that lines are found. Use with the supplied T-bar, a basic open-end wrench, a square-drive ratchet, or an air or battery powered impact wrench. The KLEDGE-LOK™ System has been successfully tested to 1000 PSI for high-pressure applications such as transmission cooler lines, steel fuel lines, and oil cooler lines. Repairs can also be made in automotive and heavy duty truck applications.
The ACRK-STARTER kit is the perfect way to set up a shop with the ability to repair aluminum A/C lines quickly and profitably. It’s also a great alternative for a shop to have a system on hand to splice new OE lines that come in two sections. The kit consists of a full SLK-2 with both tool and full set of jaws, as well as a scaled down assortment of seven total tube-to-tube repair unions. Once the amazing utility of this system is realized, the kit can be easily replenished with tube-to-hose and block-off repairs.
ALUMINUM • STEEL • COPPER • COPPER ALLOY REDUCED BARRIER A/C HOSE • NYLON TUBING
Features• Permanent leak repair• Saves time and money• Professional OE-style repair• Selected 2013 MACS Most Innovative New Product
PROFESSIONAL TUBING REPAIR • Repair leaking/damaged lines with ease!• Complete repairs on the vehicle• Get the shop started now!
Keys to Innovation:
SLK-2
ACRK-STARTER
27
LINE REPAIR SYSTEMS
ASSORTMENT DESCRIPTIONS
ASSORTMENT CONTENTS
ACRK-1 Aluminum A/C Repair Tubing Kit ACRK-1 contains 12" lengths of replacement aluminum A/C repair tubing in 5/16", 3/8", 1/2", 5/8", and 3/4" diameters to be used with the SPLICE-LOK™ and KLEDGE-LOK™ A/C repair systems. A ratcheting metal tube cutting tool is also included.
ACRK-4 Professional Tubing RepairACRK-4 contains an assortment of KLEDGE-LOK™ fittings for permanent leak repair of 5/16", 3/8", 1/2", 5/8", and 3/4" diameters of cracked, kinked or leaking lines without removing the lines from the vehicle! Designed to be used in conjunction with the professional KLEDGE-LOK™ tool (SLK-2). Repairs can be made on SAE and metric tube-to-tube, tube-to-rubber hose, or tube block-offs. See why this system was awarded the 2013 Most Innovative New Product by the Mobile Air Conditioning Society!
ACRK-2 A/C Repair Ends Aluminum O-ring Assortment ACRK-2 contains an assortment of A/C condenser aluminum O-ring repair ends in 3/8", 1/2", 5/8", and 3/4" diameters to be used with the SPLICE-LOK™ and KLEDGE-LOK™ A/C repair systems. Ends include external male, internal male, and external female.
ACRK-3 A/C Tubing Repair System ACRK-3 contains an assortment of SPLICE-LOK™ fittings for permanent leak repair of any combination of 5/16", 3/8", 1/2", 5/8", and 3/4" diameters of cracked, kinked or leaking A/C lines using standard hand tools without removing the lines from the vehicle! Repairs can be made on SAE and metric aluminum tube-to-tube, aluminum tube-to-rubber A/C hose, or aluminum tube block-offs.
FG Case Qty ACRK-1 QtyFG Part # Description
Tubi
ng
ACRK-1
ACR-011
ACR-012
ACR-013
ACR-014
ACR-015
ACR-032
SPLICE-LOK™ / KLEDGE-LOK™ A/C Repair Tubing Assortment
5/16" x 12" Aluminum A/C Repair Tubing - 8 tubes per box
3/8" x 12" Aluminum A/C Repair Tubing - 6 tubes per box
1/2" x 12" Aluminum A/C Repair Tubing - 4 tubes per box
5/8" x 12" Aluminum A/C Repair Tubing - 4 tubes per box
3/4" x 12" Aluminum A/C Repair Tubing - 4 tubes per box
Ratcheting Metal Tube Cutting Tool
1
1
1
1
1
1
1
NA
8 (1 Box)
6 (1 Box)
4 (1 Box)
4 (1 Box)
4 (1 Box)
1
Tube
Cut
ter
SPLICE-LOK™ / KLEDGE-LOK™ A/C REPAIR TUBING ASSORTMENT ACRK-1
ACR-011A/C Aluminum Repair Tubing 5/16” x 12”
ACR-015A/C Aluminum Repair Tubing3/4” x 12”
ACR-032XForce® Ratcheting Tube Cutter
ACR-013 A/C Aluminum Repair Tubing1/2” x 12”
ACR-012 A/C Aluminum Repair Tubing3/8” x 12”
ACR-014 A/C Aluminum Repair Tubing5/8” x 12”
1125260 REV A SPLICE-LOK™ / KLEDGE-LOK™ A/C REPAIR ENDS O-RING ASSORTMENT ACRK-2
ACR-0333/8” O-Ring External Male QTY: 2
ACR-0341/2” O-Ring External Male QTY: 2
ACR-0355/8” O-Ring External Male QTY: 2
ACR-0363/4” O-Ring External Male QTY: 2
ACR-0413/8” O-Ring External FemaleQTY: 2
ACR-0421/2” O-Ring External FemaleQTY: 2
ACR-0435/8” O-Ring External FemaleQTY: 2
ACR-0443/4” O-Ring External FemaleQTY: 2
ACR-037 3/8” O-Ring Internal MaleQTY: 2
ACR-038 1/2” O-Ring Internal MaleQTY: 2
ACR-039 5/8” O-Ring Internal MaleQTY: 2
ACR-040 3/4” O-Ring Internal MaleQTY: 2
1125760 REV A
KLEDGE-LOK™ A/C REPAIR ASSORTMENT ACRK-4
ACR-0015/16” Aluminum Tube to #6 Hose (5/16” / 8mm)QTY: 2
ACR-002 3/8” Aluminum Tube to #6 Hose (5/16” / 8mm)QTY: 2
ACR-003 1/2” Aluminum Tube to #8 Hose (13/32” / 10mm)QTY: 2
ACR-004 5/8” Aluminum Tube to #10 Hose (1/2” / 13mm)QTY: 2
ACR-010 3/4” Aluminum Tube to #12 Hose (5/8” / 16mm)QTY: 2
ACR-005 5/16” Aluminum Tube to 5/16” Aluminum TubeQTY: 2
ACR-0063/8” Aluminum Tube to 3/8” Aluminum TubeQTY: 2
ACR-0071/2” Aluminum Tube to 1/2” Aluminum TubeQTY: 2
ACR-0085/8” Aluminum Tube to 5/8” Aluminum TubeQTY: 2
ACR-0093/4” Aluminum Tube to 3/4” Aluminum TubeQTY: 2
ACR-0625/16” Aluminum Tube Block-OffQTY: 2
ACR-0633/8” Aluminum Tube Block-OffQTY: 2
ACR-0641/2” Aluminum Tube Block-OffQTY: 2
ACR-0655/8” Aluminum Tube Block-OffQTY: 2
ACR-0663/4” Aluminum Tube Block-OffQTY: 2
AC-6-05 Clamp Cage#6 Hose(5/16” / 8mm)QTY: 2
ACR-028 Abrasive PadQTY: 1
AC-7-05 Clamp Cage#8 Hose(13/32” / 10mm)QTY: 2
AC-8-05 Clamp Cage#10 Hose(1/2” / 13mm)QTY: 2
AC-9-05 Clamp Cage#12 Hose(5/8” / 16mm)QTY: 2
AC-6-06 Cinch Clamp#6 Hose(5/16” / 8mm)QTY: 2
AC-7-06 Cinch Clamp#8 Hose(13/32” / 10mm)QTY: 2
AC-8-06 Cinch Clamp#10 Hose(1/2” / 13mm)QTY: 2
AC-9-06 Cinch Clamp#12 Hose(5/8” / 16mm)QTY: 2
ACR-029 Anaerobic Sealing CompoundQTY: 1
1125700 REV A
*For best repair use AGS part number ACR-050 Reduced Barrier Hose
*For best repair use AGS part number ACR-050 Reduced Barrier Hose
*For best repair use AGS part number ACR-051 Reduced Barrier Hose
*For best repair use AGS part number ACR-052 Reduced Barrier Hose
*For best repair use AGS part number ACR-053 Reduced Barrier Hose
SPLICE-LOK™ A/C REPAIR ASSORTMENT ACRK-3
ACR-045Body5/8” and 3/4” TubingQTY: 2
AC-1-03Seal 5/16”QTY: 2
AC-1-04Ferrule 5/16”QTY: 2
AC-2-03Seal3/8”QTY: 2
AC-2-04Ferrule3/8”QTY: 2
AC-3-03Seal1/2”QTY: 2
AC-3-04Ferrule1/2”QTY: 2
AC-6-05Clamp Cage#6 Hose (5/16” / 8mm)QTY: 2
AC-6-06Cinch Clamp#6 Hose (5/16” / 8mm)QTY: 2
AC-4-03Seal5/8”QTY: 2
AC-4-04Ferrule5/8”QTY: 2
AC-7-05Clamp Cage#8 Hose (13/32” / 10mm)QTY: 2
AC-7-06Cinch Clamp#8 Hose (13/32” / 10mm)QTY: 2
AC-5-03Seal3/4”QTY: 2
AC-5-04Ferrule3/4”QTY: 2
AC-8-05Clamp Cage#10 Hose (1/2” / 13mm)QTY: 2
AC-8-06Cinch Clamp#10 Hose (1/2” / 13mm)QTY: 2
AC-9-05Clamp Cage#12 Hose (5/8” / 16mm)QTY: 2
AC-9-06Cinch Clamp#12 Hose (5/8” / 16mm)QTY: 2
ACR-046 Body5/16”, 3/8”, and 1/2” TubingQTY: 2
ACR-055 Body Tube To Hose5/16”, 3/8”, and 1/2” Tubing to #6 Hose (5/16” / 8mm)QTY: 2
*For best repair use AGS part number ACR-050 Reduced Barrier Hose
*For best repair use AGS part number ACR-051 Reduced Barrier Hose *For best repair use AGS part number ACR-053 Reduced Barrier Hose
*For best repair use AGS part number ACR-052 Reduced Barrier Hose
ACR-056Body Tube To Hose5/16”, 3/8”, and 1/2” Tubing to #8 Hose (13/32” / 10mm)QTY: 2
ACR-057Body Tube To Hose5/16”, 3/8”, and 1/2” Tubing to #10 Hose (1/2” / 13mm)QTY: 2
ACR-058Body Tube To Hose5/8” and 3/4” Tubing to #12 Hose (5/8” / 16mm)QTY: 2
ACR-060 Block-Off5/16”, 3/8”, 1/2”QTY: 2
ACR-061 Block-Off5/8” and 3/4”QTY: 2
1125240 REV A
LINE REPAIR SYSTEMS
28
ASSORTMENT CONTENTS (Continued)
FG Case Qty ACRK-2 QtyFG Part # Description
Exte
rnal
Mal
e ACRK-2
ACR-033
ACR-034
ACR-035
ACR-036
ACR-037
ACR-038
ACR-039
ACR-040
ACR-041
ACR-042
ACR-043
ACR-044
SPLICE-LOK™ / KLEDGE-LOK™ A/C Repair Ends O-Ring Assortment
A/C Condenser Repair End - 3/8 External Male O-Ring
A/C Condenser Repair End - 1/2 External Male O-Ring
A/C Condenser Repair End - 5/8 External Male O-Ring
A/C Condenser Repair End - 3/4 External Male O-Ring
A/C Condenser Repair End - 3/8 Internal Male O-Ring
A/C Condenser Repair End - 1/2 Internal Male O-Ring
A/C Condenser Repair End - 5/8 Internal Male O-Ring
A/C Condenser Repair End - 3/4 Internal Male O-Ring
A/C Condenser Repair End - 3/8 External Female O-Ring
A/C Condenser Repair End - 1/2 External Female O-Ring
A/C Condenser Repair End - 5/8 External Female O-Ring
A/C Condenser Repair End - 3/4 External Female O-Ring
1
5
5
5
5
5
5
5
5
5
5
5
5
NA
2
2
2
2
2
2
2
2
2
2
2
2
Inte
rnal
Mal
eEx
tern
al F
emal
e
FG Case QtyFG Part # Description
Hos
e ACR-050
ACR-051
ACR-052
ACR-053
ACR-054
10’ Coil Reduced Barrier A/C Repair #6 Hose (5/16" / 8mm)
10’ Coil Reduced Barrier A/C Repair #8 Hose (13/32" / 10mm)
10’ Coil Reduced Barrier A/C Repair #10 Hose (1/2" / 13mm)
10’ Coil Reduced Barrier A/C Repair #12 Hose (5/8" / 16mm)
A/C Hose Cutting Tool
1
1
1
1
1Hos
e Cu
tter
FG Case QtyFG Part # Description
KLED
GE-
LOK
/ ACR
K-ST
ARTE
R
SLK-2
ACRK-STARTER
SLKFR
KLEDGE-LOK™ Tubing Repair Tool with Jaws
SLK-2 and 7 repair unions for tube-to-tube repairs from 5/16" – 3/4"
KLEDGE-LOK™ Nylon Fuel Line Repair
1
NA
NA
FG Case QtyFG Part # Description
ACR
K-SW
EDG
E
ACRK-SWEDGE
ACRK-SPLICE
ACRK-DELUXE
ACRK-500
KLEDGE-LOK™ Master Kit with Free Storage Cabinet(Includes: SLK-2, ACRK-1, ACRK-2, ACRK-4, ACR-50, ACR-51, ACR-52, ACR-53, ACR-054, ACRK-500)
SPLICE-LOK™ Master Kit with Free Storage Cabinet (Includes: ACRK-1, ACRK-2, ACRK-3, ACR-50, ACR-51, ACR-52, ACR-53, ACR-054, ACRK-500)
SPLICE-LOK™ / KLEDGE-LOK™ Master Kit with Free Storage Cabinet (Includes: SLK-2, ACRK-1, ACRK-2, ACRK-3, ACRK-4, ACR-50, ACR-51, ACR-52, ACR-53, ACR-054, ACRK-500)
SPLICE-LOK™ / KLEDGE-LOK™ Storage Cabinet
1
1
1
1
ACR
K-SP
LICE
ACR
K-D
ELU
XE
Tube-to-Tube Repair
Hose-to-Tube Repair
Line Block-Off Repair
29
LINE REPAIR SYSTEMS
ASSORTMENT CONTENTS (Continued)
FG Case Qty ACRK-3 QtyFG Part # Description
A/C
Rep
air K
itVi
ton®
Sea
lTu
be-t
o-H
ose
Cinc
h Cl
amp
ACRK-3
ACRK-045C
ACRK-046C
ACR-045
ACR-046
AC-1-03
AC-1-04
AC-2-03
AC-2-04
AC-3-03
AC-3-04
AC-4-03
AC-4-04
AC-5-03
AC-5-04
ACR-055
AC-6-05
AC-6-06
ACR-056
AC-7-05
AC-7-06
ACR-057
AC-8-05
AC-8-06
ACR-058
AC-9-05
AC-9-06
ACR-060
ACR-061
SPLICE-LOK™ A/C Repair Assortment
SPLICE-LOK™ A/C Repair 5/8" & 3/4" Kit
SPLICE-LOK™ A/C Repair 5/16", 3/8", & 1/2" Kit
SPLICE-LOK™ Union Body for 5/8" & 3/4" Tube
SPLICE-LOK™ Union Body for 5/16", 3/8", & 1/2" Tube
SPLICE-LOK™ Viton® Seal for 5/16" - 2 per bag
SPLICE-LOK™ Brass Ferrule for 5/16" - 2 per bag
SPLICE-LOK™ Viton® Seal for 3/8" - 2 per bag
SPLICE-LOK™ Brass Ferrule for 3/8" - 2 per bag
SPLICE-LOK™ Viton® Seal for 1/2" - 2 per bag
SPLICE-LOK™ Brass Ferrule for 1/2" - 2 per bag
SPLICE-LOK™ Viton® Seal for 5/8" - 2 per bag
SPLICE-LOK™ Brass Ferrule for 5/8" - 2 per bag
SPLICE-LOK™ Viton® Seal for 3/4" - 2 per bag
SPLICE-LOK™ Brass Ferrule for 3/4" - 2 per bag
SPLICE-LOK™ Union Body for 5/16", 3/8", & 1/2" Tube to #6 A/C Hose
5/16" Clamp Locator Cage for #6 A/C Hose
5/16" Clamps for #6 A/C Hose - 2 per bag
SPLICE-LOK™ Union Body for 5/16", 3/8", & 1/2" Tube to #8 A/C Hose
3/8" Clamp Locator Cage for #8 A/C Hose
3/8" Clamps for #8 A/C Hose - 2 per bag
SPLICE-LOK™ Union Body for 5/16", 3/8", & 1/2" Tube to #10 A/C Hose
1/2" Clamp Locator Cage for #10 A/C Hose
1/2" Clamps for #10 A/C Hose - 2 per bag
SPLICE-LOK™ Union Body for 5/8" & 3/4" Tube to #12 A/C Hose
5/8" Clamp Locator Cage for #12 A/C Hose
5/8" Clamps for #12 A/C Hose - 2 per bag
SPLICE-LOK™ Block-Off Body for 5/16", 3/8", & 1/2" Tube
SPLICE-LOK™ Block-Off Body for 5/8" & 3/4" Tube
1
5
5
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
5
5
NA
NA
NA
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Uni
on B
ody
Bras
s Fe
rrul
eCl
amp
Cage
Bloc
k-O
ff
• Permanent Leak Repair• Saves Time and Money• Use Standard Hand Tools• Straight or Reducing
See the video!
BEFORE
AFTER
RELATED LUBRICANTS AND CHEMICALS
Sil-Glyde® Brake Lubricant is a silicone-based brake lubricant recommended for the entire brake assembly and is compatible with rubber. It is moisture-proof and heat resistant to over 425˚F (218˚C), which means it won’t burn-off like other brake noise products. Using AGS brake lubricant is one of the keys to eliminating disc brake squeal.
Thread-Magic® Avoid stuck plugs and bolts. Assure easy removal on aluminum and cast iron components to prevent seizing, galling, and damage during disassembly. Suggested Applications: Spark plugs, bolts, and fasteners.
Silicone Brake Fluid is specially formulated, high-temperature fluid required in some modern brake systems. Reduces corrosion in the braking system. Provides even braking performance in temperatures from -75˚F to +600˚F. Recommended for Domestic, European, and Japanese vehicles. Excellent for motorcycles, heavy duty vehicles, and trailer units.
Mr. Penetrant® Proven and trusted to be more effective in breaking-up rust than spray-on petroleum products. Innovative “Squirt On” Applicator gets product quickly where it needs to go. Perfect for chassis bolts that are rusted in place.
Oil Drain Plug and Filter Thread Sealant Prevent engine damaging oil leaks with AGS Thread Sealant. Apply to threads on all types of all filters and oil drain plugs to prevent freeze-ups. Allows for easier, safer, and trouble-free removal.
BK-1 BK-1D DISPLAY BK-8 BK-12
MR-2
Cerami-Glyde™ is a hi-performance brake lubricant for all contact points. It is a new formula for ceramic pads that prevent brake noise.
SBF-12 SBF-17 SBF-18
TM-1TMK-1 TMP-1
ODP-1
CM-1
BK-4
CM-4 CM-8
Scan to view more information on the complete line of AGS specialty lubricants
AGS CompanyP.O. Box 729, Muskegon, MI 49443, U.S.A. • Toll Free 1-800-253-0403 Toll Free in Michigan & Canada 800-735-0403 • FAX (231) 733-1784 • www.agscompany.com
C-690 REV HPrinted in USA
For additional innovative products from AGS, go to www.agscompany.com or see the following catalogs:
C-1180 – Tool Innovations Revolutionary Solutions for Everyday Problems
C-1040 – Specialized Lubricants Specialty Greases, Aerosols, Additives
C-1090 – Line Repair SystemsFast, Economical Tube and Hose Repair
C-1010 – Oil Drain Plugs More Coverage, Fewer Part Numbers, Superior Features, Higher Quality
www.xforcetools.com
AGS introduces a range of amazing and innovative fastening, gripping, and flaring tools
AGS line repair systems improves line repair technology for all air conditioning and coolant
For additional information on ourXForce tool products, visit:
TM
360º WRAP-AROUND WRENCH • BYBRAKE AND FUEL LINE WRENCH .
TM
BY
RATCHETING FLARE NUT WRENCH LOCKING NUT DRIVER PRO