2012/2013 usa product catalog - eagle diary direct usa... · slightly larger bore and mouth, cut...

www.milk-rite.com

2012/2013 USA PRODUCT CATALOG

Leading the way in

miLkinGTeChnOLOGy

02

Welcome to the milk-Rite Product Catalog

Containing new and innovative technology products providing more efficient and gentler milking on the animal and optimal use for the dairy farmer.

Milk-Rite is part of avon Rubber p.l.c., the world’s leading manufacturer of milk liners. having supplied the dairy industry for over 85 years, Milk-Rite

is building on avon’s heritage and vast material expertise, offering the dairy industry quality own-branded and competitively priced cluster units and

liners. Milk-Rite is backed by the best development support possible and with a primary focus on animal health and milk quality.

milk-Rite......leading the way in milking technology.

Milk-Rite east 1.800.558.0150 Milk-Rite west 1.800.927.4454 www.milk-rite.com 03

Contents

infLATiOnS ULtRaLineR® | Lt® | tLC® p. 6–7

iMpULse p. 8–10

DAiRy TUbinG p. 11–13

miLk fiLTeRS p. 14–15

CLeAninG TOOLS p. 18–19

eqUiPmenT & PARTS p. 21

TUbeS, JeTTeRS & GASkeTS p. 16–17

WORk WeAR p. 20

miSCeLLAneOUS p. 22–23

www.milk-rite.com

04 www.milk-rite.com Milk-Rite east 1.800.558.0150 Milk-Rite west 1.800.927.4454

Use our website atwww.milk-rite.com for allthe up to date featureson products and technicalinformation to help youimprove milking efficiency

CHOOSE BETWEEN OUR USA OR EUROPEANPRODUCT RANGE

WE OffER fUll ClUSTER UPGRADES AND SOlUTiONS

lATEST TECHNOlOGY -iMPUlSE TRiANGUlARAND MOUTHPiECEVENTED liNERS

TECHNiCAl iNfORMATiONTO HElP YOU MANAGEliNER PERfORMANCE

MILK-RIte8-POinT PLAn


Only milk clean teatsEnsure excellent cow comfort, bed well, clipexcessive udder hair, use water sparinglyand clean teats thoroughly with individualmedicated towels.

fore strip every teatCheck carefully for mastitis while massagingeach teat for optimum oxytocin release.

Pre-dip if requiredReduce numbers of environmental bacteriawith a fast acting pre-milk teat dip.

Dry teats thoroughlyUse a disposable paper towel for each cowfor thorough and efficient drying.

Position clusters carefullyAvoid twists and uneven milk-out and worksuch that clusters go on 90 seconds after start of fore milking.

Remove clusters carefully soon after milk stops flowingAvoid liner slip as milking slows and removeteat cups after shutting off vacuum.

Dip teats immediately after cluster removalAfter cluster removal promptly apply a goodquality dip over the lower third of each teat.

Use a loafing area after milkingEnsure cows remain standing for 20 minutes after milking by providing fresh feed after they leave.

1 5

26

3 7

4

8


InFLAtIons ULtRALIneR® | Lt® | and tLC®

Milk-Rite’s own brand of liners, ULTRALINER, LT and TLC offer value for money and the latest in technological innovations. This range includes over 80 different liners to fit most makes and types of dairy shell. Also available is the new IMPULSE range, round and triangle liners designed for less slip, improved cow comfort and teat end health in their own unique interlocking anti-twist shell design.

UlTRAliNER iNflATiONS

styLe nO. CROss ReFeRenCe type sheLL

bOU-mATiC® COmPATibLeB1U R-1 & R1C One-piece stainless shell

R1CU Conewango iB-R1C One-piece stainless shell

R1dU Conewango iB-R1d One-piece stainless shell

B2U R-2, R-2B & R-2Cs short inflation stainless shell

B2VU R-2, R-2B & R-2CV short inflation Visible shell

B1U-Lt R1C & R1d One-piece stainless shell

B1Fs-Lt R1d One-piece stainless shell

tLC-B1 triangular One-piece stainless shell

tLC-sB2000 triangular One-piece stainless shell

ChORe-bOy® COmPATibLeL623n 12050, 12052 5 3/4” Light weight

KF 12051, 12053, 12058 KLeen-FLO

COnDe® COmPATibLenBsC nBsC - thin wall standard

DAiRymASTeR COmPATibLedM916 916 dairymaster s.s. shell

De LAVAL® 06 COmPATibLeO1U 01, 01M standard wall O6 standard

O1aU 01 thin wall O6 standard

01BU Conewango id-01a O6 standard

id-01a Conewango id-01a O6 standard

id-01aC Conewango id-01aC O6 standard

id-01d Conewango id-01d O6 standard

References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milk-Rite liners and their compatibility with the equipment of those manufacturers.


styLe nO. CROss ReFeRenCe type sheLLJeRsey For Jersey herds O6 standard

dL1U d/L applications O6 standard

dL2U d/L applications O6 standard

dLMU d/L applications (less restrictive) O6 standard

O1U-Lt high Capacity 01U O6 standard

O1aU-Lt high Capacity 01aU O6 standard

08U-Lt super-Flo 08 O6 standard

08eU-Lt Conewango id-08e O6 standard

2100U-Lt deLaval 2100 harmony O6 standard

6100U-Lt Cling-soft 6100 O6 standard

dwC-Lt wC-01 O6 standard

tLC-d1 triangular O6 standard

tLC-d2000 triangular O6 standard

tLC-d2000nC triangular, extra cut reinforcement on tube O6 standard

tLC-dh2000 triangular For harmony Claws O6 standard

GeA® (WeSTfALiA® / SURGe®) COmPATibLedwC-Lt 4012-7025-000 small westfalia shell Only

01U 4012-7025-000 small westfalia shell Only

dL2U 4012-0241-086 small westfalia shell Only

01BU 4012-7025-000 small westfalia shell Only

OO4U 4021-0241-004 Bio Milker shell Only

JF50U 10050, 10051 Mini-Orbit/eclipse Jet-Flo

JF48 10048 Mini-Orbit/eclipse Jet-Flo

JF50 10050 Mini-Orbit/eclipse Jet-Flo

FdU 10057, 10100 Rings & grips Continental/narrow Vacuum saver

JFsU 10080 & 10081 BreakerCups/Lids Jet-Flo

a2 10043 a2 Large Bucket Lids C shell

JF60U-Lt 10060 Mini-Orbit/eclipse Jet-Flo

JF62U-Lt 10062 Mini-Orbit/eclipse Jet-Flo

tLC-s1 triangular Mini-Orbit/eclipse Jet-Flo

tLC-sB2000 triangular Mini-Orbit/eclipse Jet-Flo

nU PULSe® COmPATibLeMaX-n1 nupulse super standard

UniVeRSAL® COmPATibLe282U 282 Visible shell

iU-282 Conewango iU-282 Visible shell

6RU 6R 2Ms stainless shell

6M 6M Medium 2Ms stainless shell

tLC-U1 281 & 282 Visible shell

DeLAVAL 06 COmPATibLe (COnT.)


MILK AND REST PHASESWORKING

VACUUM

ATMOSPHERIC PRESSURE

SHORT SHORTLONG LONG

a

-4kPa

+4kPa

b dc

IMPULse PRoDUCt RAnGe

®

The Milk-Rite Impulse milking assembly offers producers the chance to enhance milking performance compared with traditional liner/shell combinations, improving both the milking action and cow comfort. This unique milking assembly features and impact resistant shell with a triangular shaped interior. This is combined with an anti-twist interlocking triangular shaped liner.

Triangular liner / Shell combination

The triangular interior reduces the total air volume between the shell and the liner. This leads to a more responsive opening and closing of the liner, which optimizes the milk and the rest phases of pulsation.

How it works

GenTLe mASSAGe OnThe COWS TeAT

beTTeR GRiP TOThe TeAT

feWeR SLiPS, SqUeALSAnD SqUAWkS

ShORTeR A AnD C PhASeS TO inCReASemiLk AnD ReST PhASeS

LiGhTeR WeiGhT & SheLL COmbinATiOnSfOR LeSS STReSS On The TeAT

LiGhTeR WeiGhT CLUSTeRS


TRIANGULAR SHAPEReduces Air Volume

for faster Opening andClosing of Liner

®


iteM nO. sheLL type desCRiptiOn

imPULSe® TRiAnGULAR infLATiOnSip1 Blue, impact Resistant narrow bore. single piece, high-capacity milk tube.

ip2 Blue, impact Resistant narrow bore single piece, longer life.

ip3 Blue, impact Resistant slightly larger bore and mouth than the ip1. single piece, high-capacity milk tube.

ip3-LM Blue, impact Resistant slightly wider bore and larger mouth. Less restrictive milking.

ip3-LM-nC Blue, impact resistant slightly larger bore and mouth, cut resistant milk tube.

ip3-wB Blue, impact Resistant slightly wider bore. narrower head, fits westfalia wash block.

ip4-LM Blue, impact Resistant slightly larger bore and mouth, longer life.

ip4-LM-nC Blue, impact resistant slightly larger, longer life, cut resistant milk tube.

ip4-LM-sB Blue, impact resistant slightly larger bore and mouth, fits surge Jet-Flo wash block.

ip4-LM-wB Blue, impact resistant slightly larger bore and mouth, fits westfalia type wash block.

imPULSe® SiLiCOne infLATiOn ASSembLieSips sV asseMBLy Blue, impact Resistant assembled inflation, shell, stainless weight, Vented Connector.

ips sn asseMBLy Blue, impact Resistant assembled inflation, shell, stainless weight, non-Vented Connector.

ips pV asseMBLy Blue, impact Resistant assembled inflation, shell, plastic weight, Vented Connector.

ips pn asseMBLy Blue, impact Resistant assembled inflation, shell, plastic weight, non-Vented Connector.

ips-LM sV asseMBLy Blue, impact Resistant inflation, shell, stainless weight, vented connector. slightly wider bore and larger mouth. Less restrictive milking.

ips-LM sn asseMBLy Blue, impact Resistant inflation, shell, stainless weight, non-vented connector. slightly wider bore and larger mouth. Less restrictive milking.

ips-LM pV asseMBLy inflation, shell, plastic weight, non-vented connector. slightly wider bore and larger mouth. Less restrictive milking.

ips-LM pn asseMBLy inflation, shell, plastic weight, non-vented connector. slightly wider bore and larger mouth. Less restrictive milking.

Locking Anti-Twist feature

improvedSlippageControl

impactResistant Shell

SheLLS AnD miSC. miLkinG PARTS


iteM nO. sheLL type desCRiptiOn

imPULSe® SheLLS & COmPOnenTSip sheLLswt BLUe iMpULse sheLL with swt

(triangular interior)Blue shell with stainless weight

ip sheLLpwt BLUe iMpULse sheLL with pwt (triangular interior)

Blue shell with plastic weight

ip sheLLBOdy BLUe pLastiC sheLL BOdy (triangular interior)

Blue plastic shell Body Only

ip swt ss weight stainless steel weight

ip pwt p weight plastic (Light) weight

ip JC2 Jetter Cup Open top (with stem) grooved for trays

ip wC impulse Jetter Open top (without stem)

ip VC Vented Connector Clear plastic Connector - Vented

ip nC non-Vented Connector Clear plastic Connector - non-Vented

ip VCOt Vent Clean Out wire in holder

ip Mt Milk tube Fits Visable Connector - 5” length

De LAVAL COmPATibLe SheLLS06 sheLL de LaVaL 06 type Rolled top s.s. 1-pc. (each)

M 7006 BLaCK pLastiC sheLL- 06 type Light weight plastic shell (each)

eZ®03 miLkinG SySTemeZ-03 eZ One-piece 03 type Liner with Ring

aB eZ adapter Bushing For d/L 03 shell

03 STReTCh LineR miLkinGO3s siLenCeR 03s tapered 5/8"

O3RU ROULette 03RU tapered 5/8"

sC-300 standard soft sani-Cup standard

sC-300U Ultracap soft sani-Cup ULtRaCap

miSCeLLAneOUS7800 pluggit, inflation shut-off plug Fits all inflations

7370 duck Bill. Rubber drain Valve For Jetters

7814 Filter Retainer gaskets, holds Filter and spring together

Fits Over spring

7815 Fits inside spring

7758inlet Closures, Covers entire nipple end

9/16” i.d. for 5/8” inlets

7734 11/16" i.d. for 3/4" inlets

7200 inlet Closures, diverter Valve 2"


DAiRy TUbinG


iteM nO. siZe type/COMpatiBLe Case Unit

bLUe Line RUbbeR VACUUm hOSeS7509 1/4" i.d. x 50' Bou-Matic, Universal 1 pkg./1

7510 1/4" twin x 50' Bou-Matic, Universal 5 pkg./1

7515 9/32" i.d. x 9' de Laval 10 pkg./1

7516 9/32" i.d. x 50' de Laval 10 pkg./1

7517 9/32" twin x 50' de Laval 4 pkg./1

7514 3/8" i.d. x 9' surge electric 10 pkg./1

7513 7/16" i.d. x 7 1/2' surge pneumatic 10 pkg./1

7518 7/16" i.d. x 50' surge pneumatic 4 pkg./1

bLUe Line RUbbeR miLk hOSeS7512 1/2" i.d. x 50' Coiled 4 pkg./1

7500 9/16" x 7/32" x 9' Coiled 10 pkg./1

7501 9/16" x 7/32" x 50' Coiled 2 pkg./1

7502 9/16" x 13/64" x 50' Coiled 3 pkg./1

7504 5/8" x 7/32" x 9' Coiled 10 pkg./1

7505 5/8" x 7/32" x 50' Coiled 2 pkg./1

7506 5/8" x 13/64" x 50' Coiled 2 pkg./1

7511 3/4" x 7/32" x 50' Coiled 2 pkg./1

7519 7/8" x 7/32" x 50' Coiled 2 pkg./1

different sizes of Blue Line rubber tubing can be combined to achieve the 500' quantity level.

bLUe Line ShORT RUbbeR AiR TUbeS - eXTRUDeD7520 1/4" i.d. x 9" Bou-Matic pkg./24 20

7527* 1/4" i.d. x 7" Bou-Matic pkg./24 20

DAiRy TUbinG RUbbeR

RUbbeR

PLASTiC

ULTRACLeAn

SiLiCOne



DAiRy TUbinG PLAstIC

iteM nO. siZe paCKaging Case Unit

TRAnSfLOW™ PLASTiC miLk (m-34R) TUbinG*8002 7/16" i.d. x 100' Box 1 each

8012 1/2" i.d. x 100' Box 1 each

8022 9/16" i.d. x 100' Box 1 each

8023 9/16" i.d. x 500' Reel 1 each

8032 5/8' i.d. x 100' Box 1 each

8033 5/8" i.d. x 500' Reel 1 each

8042 3/4" i.d. x 100' Box 1 each

8052 7/8" i.d. x 100' Box 1 each

8062 1" i.d. x 100' Box 1 each

8072 1 1/2" i.d. x 60' Box 1 each

TRAnSfLOW™ CLeAR PLASTiC VACUUm (A-24) TUbinG*8202 1/4" i.d. x 100' Box 1 each

8212 9/32" i.d. x 100' Box 1 each

8221 3/8" i.d. x 100' Black Box 1 each

8222 3/8" i.d. x 100' Box 1 each

8232 7/16" i.d. x 100' Box 1 each

8242 1/2" i.d. x 100' Box 1 each

8312 1/4" twin x 100' Box 1 each

8302 9/32" twin x 100' Box 1 each

8332 9/32" twin x 500' Reel 1 each

8322 3/8" twin x 100' Box 1 each

TRAnSfLOW™ ShORT PLASTiC AiR TUbeS8400 9/32" i.d. x 9" Box each 100

8600* 9/32" i.d. x 8" Box each 100

8500* 1/4" i.d. x 7" Box each 100

This Lightweight, flexible plastic tubing that meets all

FDA and 3-A standards. Easy-to-handle tubing for milk

tubes and stanchion hoses. Easy to clean. Durable;

won’t age, flake, or check.

lightweight and flexible!


DAiRy TUbinG sILIConeiteM nO. siZe desCRiptiOn Unit

miLk-RiTe SiLiCOne TUbinG9022sC 9/16" i.d. x 100' Clear

9032sB 5/8" i.d. x 100' Blue

9032sC 5/8" i.d. x 100' Clear

9042sC 3/4" i.d. x 100' Clear

9042sB 3/4" i.d. x 100' Blue

9052sC 7/8" i.d. x 100' Clear


iteM nO. siZe RepLaCes paCKage Case

ULTRACLeAn® miLk TUbinG6505 5/8" i.d. x 65' ULtRaCLean 1 each

6511 3/4" i.d. x 65' ULtRaCLean 1 each

Rubber exterior provides flexibility, durability, andexcellent ozone resistance

TPV inner surface possesses a high chemical resistance,low extractables, andmaintains a prolongedsanitary surface.

WiLL nOT CRACk, PiTOR DeGRADe

eXCeeDS fDA &eUROPeAn STAnDARDS

LOW eXTRACTAbLeS

DAiRy TUbinG ULtRACLeAn®

ULTRACLEAN Dairy Tubing is the first tubing that combines a smooth sanitary interior surface with a durable, flexible rubber exterior. ULTRACLEAN Tubing utilizes the latest in polymer technology by chemically crosslinking the inner and outer materials together. The result is a long-lasting tubing that will clean better and maintain milk purity like no other product on the market today. Due to its low level of permeation, reduced extractables, and high tear strength, ULTRACLEAN Tubing offers distinct advantages over all other available dairy tubing. Ask your supplier about ULTRACLEAN Dairy Tubing or call the Milk-Rite sales team.

Smooth interior with a durable exterior


miLk fiLTeRS ULtRACLeAniteM nO. siZe desCRiptiOn Unit

ULTRACLeAn® fiLTeRS - SOCkSF 480U 4 7/8" x 33 1/2" 50/Box - 9 Boxes/Case

F 760U 2" x 24" 100/Box - 6 Boxes/Case

F 770U 2 1/4" x 24" 100/Box - 6 Boxes/Case

F 720U 3" x 23 3/8" 100/Box - 6 Boxes/Case

ULTRACLeAn® fiLTeRS - TUbeSF 470U 4 7/8" x 17" 50/Box - 10 Boxes/Case

F 380U 4 7/8" x 33 1/2" 50/Box - 9 Boxes/Case

F 390U 4 7/8" x 36" 50/Box - 9 Boxes/Case

MILK FILteRs

fAST fLOW

eCOnOmiCAL

eASy TO inSTALL

fAST WeT-OUT

SUPeRiOR WeT STRenGTh

eXCeLLenT SeDimenT ReTenTiOn


The non-woven fibers of ULTRACLEAN filters are resin bonded to perform under pressure... withstanding even the toughest use conditions. ULTRACLEAN filters are not only strong, they also provide maximum sediment retention. In fact, ULTRACLEAN filters stop particulate matter as small as 35 to 50 microns, or about the width of a human hair! And with fast wet-out and fast flow... ULTRACLEAN filters really perform. ULTRACLEAN filters will help today’s milking systems operate at peak efficiency.

Strong, Clean and Made to Perform!


iteM nO. siZe desCRiptiOn Unit

TUffy™ fiLTeRS - SOCkSsF 4179 2" x 24" 100/Box - 6 Boxes/Case

sF 4185 2 1/4" x 24" 100/Box - 6 Boxes/Case

sF 4175 3" x 23 1/2" 100/Box - 5 Boxes/Case



sF 4197 4 7/8' x 17" 50/Box - 9 Boxes/Case


sF 4192 4 7/8" x 33 1/2" 50/Box - 9 Boxes/Case

sF 4307 5" x 17" 50/Box - 9 Boxes/Case

TUffy™ fiLTeRS - SLeeVeSsF 4196 4 7/8" x 17" 50/Box - 9 Boxes/Case





kenAG™ fiLTeRS - DiSkSKa d110 6 1/2" non-gauze disks 100/Box - 36 Boxes/Case

Ka d506 4 9/16" in-Line disks 100/Box - 36 Boxes/Case

kenAG™ fiLTeRS - TUbeSKa d547 4 7/8" x 17"

Break proof tubes

50/Box - 10 Boxes/Case

Ka d538 4 7/8" x 33 1/2" 50/Box - 9 Boxes/Case

Ka d539 4 7/8" x 36" 50/Box - 9 Boxes/Case

kenAG™ fiLTeRS - SOCkSKa d548 4 7/8" x 33 1/2"

Break proof socks For Moderate to high pressure pipeline systems



Ka d576 2" x 24" 100/Box - 6 Boxes/Case


Ka d572 3" x 23 3/8" 100/Box - 6 Boxes/Case


Ka d584 2 1/4" x 12"Ultra Flow socks


Ka d591 2 3/4" x 23 1/2" 100/Box - 6 Boxes/Case

Ka d550 * 2 1/4" x 5 1/2"

pre-Filter (defoaming) socks



Ka d569 5" x 20" 100/Box - 12 Boxes/Case

different Kenag filters can be combined to attain the 10 case pricing level.

miLk fiLTeRS KenAG

miLk fiLTeRS tUFFY



TUbeS, JeTTeRS, AnD GASkeTS


RUbbeR TUbeSiteM nO. siZe COMpatiBLe with paCKage Case

mOLDeD ShORT AiR TUbeS (1 CASe contains 5 CARTOnS of 100)1031p

3/16" i.d. x 8" sURgepkg/8, (12 bags/box)

1031 500 each

1027p1/4” i.d. x 6 1/2” UniVeRsaL, ChORe-BOy

pkg/8, (12 bags/box)

1027 500 each

1028p1/4” i.d. x 7 1/2” BOU-MatiC


1028 500 each

1030p1/4” i.d. x 9” BOU-MatiC


1030 500 each

1033p9/32” i.d. x 7 1/2” de LaVaL, nU pULse


1033 500 each

1034p9/32” i.d. x 9” de LaVaL


1034 500 each

mOLDeD ShORT miLk TUbeS (1 CASe contains 5 CARTOnS of 100)1020p 7/16” i.d. x 5 1/4”

plain style

BOU-MatiC types


1020 500 each

1020Up 7/16” i.d. x 5 1/4”ULtRa style


1020U 500 each

Mt-80 .337" i.d. x 5.5" long

ULtRa style westFaLia types

500 each

Mt-90 .337” i.d. x 7.0” long 500 each

Mt-100 .405” i.d. x 5.5” long 500 each

O4ts 1/2” i.d. x 5” Large ULtRa style 500 each

mOLDeD ShORT AiR TUbeS JeTTeR CUPS

PiPeLine GASkeTS WASh CUPS

Molded Short Air Tubes are made with molded rubber with reinforced ends. They come eight in a pack and in a variety of sizes to fit your needs.

These wash cups are durable and easy to install and maintain. They come in a assortment of sizes and designs.

Jetter Cups are a perfect fit for washing Inflations in clean-in-place washing systems. Choose from a open cup or flat top design.

Choose from a great collection of clamps and gaskets to correctly fit your pipeline application. SURGE, TRI-Clover and Except SURGE Types are provided.


iteM nO. COMpatiBLe with paCKage Case

JeTTeR CUPS7322 BOU-MatiC Open Cup design 2 1/4" (groove in tube for tee assbly) 100 each

7330 sURge, UniVeRsaL Open Cup design 100 each

7340 BOU-MatiC Flat top design 1 9/16" 100 each

7350 de LaVaL Flat top design 1 3/8" 100 each

7350-g de LaVaL Jetter Cup – Flat top – 1 3/8”, grooved Milk tube 100 each

7360 OtheRs (Fits stretch Liners) Flat top design 1 1/2" 100 each

ip-JC iMpULse only Open top 2" for tray assemblies (groove in upper tube) 100 each

ip-JC2 iMpULse only Open top, grooved, with stem, (ip wC upper cup) 100 each

WASh CUPS7310 de LaVaL Manifolds standard size 48 each

7311 de LaVaL Manifolds Large ULtRa size 48 each

7312 de LaVaL Candle stick style Medium size- 1 15/16" 50 each

7313 de LaVaL Candle stick style high profile design, fits impulse & Others 100 each

7315 westFaLia sURge Manifolds Open cup for westfalia Manifold & Jet Flo shells 100 each

7316 geRMania / deLaVaL tray Flat top design 1 1/2" (no stem) 100 each

7318 westFaLia sURge Rubber wash cup 100 each

ip-wC iMpULse Open cup 1 15/16" for BM rot. trays (grooved, no stem) 100 each

ip-ws-wC iMpULse Open cup for westfalia Manifold & impulse Liners 100 each

iteM nO. siZe or COLOR desCRiptiOn Unit

PiPeLine GASkeTS 6015

sURge Compatible

Clamp type For stainless steel pipelines

1 1/2"

6020 2"

6115

tRi-Clover Compatible

1 1/2"

6120 2"

6125 2 1/2"

6130 3"

6315For glass pipelines

1 1/2"

6320 2"

PAiL GASkeTS1041C “newer 06409

6 1/4”” x 7 31/32”” x 1/4””” de LaVaL Compatible25 pkg/1

1041 25 each

1047C "suspended 104556 3/8"" x 7 7/8"" x 3/16""" sURge Compatible

25 pkg/1

1047 25 each

1044C "newer 1226 3/4"" x 7 7/8"" x 5/16""" UniVeRsaL Compatible

25 pkg/1

1044 25 each


JeTTeR & WASh CUPS

GASkeTS


iteM nO. desCRiptiOn Unit

SPARTA™ GeneRAL CLeAn-UP & SCRUb bRUSheSsB 43 (4052000) Viking tynex general Brush each

sB 45 (4054000) hercules tynex Clean-up Brush, gong type each

sB 44X (4053400) Foam Block 8" hand scrub, gong type each

sB 48X (4054104) plastic Clean-up scrub each

sB 20-44X (4050300) hand scrub 20" Brush each

sB 20-45 (4050000) hercules Long handle tynex Brush each

sB 356pB (4004200) Large tank tynex Brush each

sB 358pB (4004000) Regular tank tynex Brush each

SPARTA™ bROOm & fLOOR SCRUbSsB 38X (4042304) "hi-Lo" Floor scrubber each

sB 32-10 (4044000) plastic Fiber 10" Floor scrubber each

sB 011-16 (4061500) Barn & street plastic 16" Broom each

sB 081-24 (4062600) heavy duty garage 24" Broom each

sB 055 (4564900) Metal top polyfill Broom each

SPARTA™ SPOnGeSsB 9700 (4148400) Kleen-Udder Cotton towel, 13" x 17" (green) 10/pkg

SPARTA miSCeLLAneOUSsB 777 (4005075) truck & wall green nylon Brush each

CLeAnInG tooLs bRUsHes | noZZeLs


This brush has crimped bristles that wash easily and prevent gathering of mold and mildew. The shape is perfect for cleaning many surfaces, under counters, around equipment and along baseboards.

SPARTA™ Hi-lO BRUSH

This brush comes with multiple trim angles on the polyester bristles, to ensure complete surface contact and a thorough clean. The Handle is designed to be easy to maneuver and will not absorb oils or moisture.

SPARTA™ SCRUB BRUSH

This durable fiberglass handle is extremely durable and chemical resistant. Its threaded end is adaptable to a variety of brushes and other attachments.

fiBERGlASS HANDlE

Scotch-Brite Heavy duty scour pads clean tough workplace messes. Works faster than other heavy duty scour pads making troublesome jobs fast and easy.

SCOTCH-BRiTE™ HEAVY DUTY SCOURiNG PAD



SPARTA™ hAnDLeSsB 016-60 (4022500) Fiberglass handle 60" threaded each

sB 017-60 (4026200) wood handle 60" tapered end each

sB 018-60 (4026700) wood handle 60" threaded end, 1 1/8" each

sB 020-60 (4526700) wood handle 60" threaded Metal tip end each

sB 021-48t (4023300) plastic handle 48" threaded each

sB 021-60t (4023200) plastic handle 60" threaded each

* please note that handles 60” or longer will incur additional freight charges

SPARTA™ CLAW, infLATiOn, bOTTLe & VALVe bRUSheSsB 10s (4137300) double end Claw Brush 1" each

sB 1010 (4000102) Large Bottle & Valve Brush each

sB 125n (4137600) single end Claw 11/16" Brush each

sB 120n (4124000) single end Claw 3/8" Brush each

sB 359ph (4125500) Valve Outlet Brush each

sB 337s-1 (4018002) Valve & Fitting 1" Brush each

sB 337s-1.5 (4018102) Valve & Fitting 1.5" Brush each


sB 337s-2.5 (4018302) Valve & Fitting 2.5" Brush each


sB 66n-phQt (4046702) Quart Bottle Brush each

sB 63n-ph1/2gaL (4046800) 1/2 gallon Bottle Brush each

sB 83n-phgaL (4046900) gallon Bottle Brush each

iteM nO. type desCRiptiOn siZes

GiLmOUR™ nOZZLeS & ACCeSSORieSgg 474 Large poly threaded nozzle each

gg 572 Large Chromed Zinc nozzle (insulated grip) each

gg 573 Large Metallized Zinc nozzle each

3m SCOTCh-bRiTe™ SPOnGeS & PADSsBn 86 scotch-Brite heavy duty scouring pad 3/12pkg/Case

sBn 96 scotch-Brite general purpose scouring pad 3/20pkg/Case

sBn 84 scotch-Brite stainless steel scrubber 12/Case

microfiber TowelsMt-t-12-y-s yellow Microfiber towel 5/50pkg/Case

Mt-t-12-B-s Blue Microfiber towel 5/50pkg/Case

CLeAninG TOOLS sPARtA

CLeAninG TOOLS noZZLes | sPonGes | toweLs


SCOTCH-BRiTE™ HEAVY DUTY SCOURiNG PAD


iteM nO. type desCRiptiOn siZes

DiSPOSAbLe miLkinG GLOVeS - niTRiLeMCR 6002 powdered nitrile gloves

100/Box - 10 Boxes/Cases-XL

MCR 6001 powder Free nitrile gloves 100/Box - 10 Boxes/Case

s-XL

DiSPOSAbLe miLkinG GLOVeS - LATeXMCR 5059 powdered Latex gloves

100/Box - 10 Boxes/Case05 - 13

TinGLey™ knee bOOTtL 51144- tingLey Knee boot plain toe, Cold weather Flexibility,

abrasion Resistance

TinGLey™ OVeRShOeStL 1300- hi-top deep Cleats For slip Resistance, heavy duty s - g

tL 1400- 10" work Boot Kick-off Cleats, & sturdy Button For s - 2XL

tL 1500- 17" work Boot secure Closure s - g

SeRVUS™ bOOTSsV 22115- seRVUs duraguard Boot 12 1/2" Brown neoprene, plain toe,

Rubber sole06 - 13

sV 22215- seRVUs duraguard Boot 15 1/2" Brown neoprene, plain toe, Rubber sole

06 - 13

sV 75122- seRVUs "grey Max" Boot 15" grey Knee Boot 06 - 13

SeRVUS™ inSOLeSsV 28114 seRVUs insole wool Felt insole 06 - 13

WORk APROnSKM ny18M apron yellow neoprene One size

KM hB18M apron Black hyCaR One size

KM hw18M apron white hyCaR One size

KM p6512 apron Clear pVC One size

C 601eB apron nylon Blue neoprene One size

woRK weAR GLoVes | boots | APRons


This overshoe from Tingley is designed to stretch and fit easily over regular work boots. The shoe is constructed with resistant material in the heel, sole, and toe for longer wear. It features thick tread for excellent traction.

TiNGlEY™ 10” WORk BOOT

The Sentinel Vacuum Controller helps maintain a stable and consistent vacuum essential to proper functioning of a milking system. Milk-Rite also provides Replacement Parts.

THE SENTiNEl™VACUUM CONTROllER



SenTineL™ VACUUm COnTROLLeRSV MaRK ii Vacuum Controller Mark ii each

V MOdeL-350 Vacuum Controller Model-350 each

PeACekeePeRSV 462-200 Mark i / Mark ii peaceKeeper each

V 462-4 peaceKeeper Filter each

V 462-5-350* peaceKeeper 462-350 isolator each

SenTineL™ mODeL-350 COmPOnenTSV 348-9* Model-350 diaphragm assembly each

V 348-11* Model-350 dome each

V 348-12* Model-350 air Filter gauge each

V 348-14 Model-350 s.s. adjusting wrench each

V 348-17* Model-350 safety Valve each

V 348-23 Model-350 spring guide each

V 348-24* Model-350 damping Collar Complete each

V 348-25 Model-350 damping Collar spring each

V 348-26* Model-350 damping Collar Retainer each

V 348-28 Model-350 Flange screws (8-32 X 5/8) each

V 348-33 Model-350 Filter Replacement Cartridge each

V 348-35 Model-350 aneroid assembly Complete each

V 348-36* Model-350 top dome Filter Complete each

SenTineL™ mARk ii COmPOnenTSV 406-11 Mark ii dome Regular diaphragm assembly each

V 406-14 Mark ii Rolling seal each

V 406-21 Mark ii air Filter each

V 406-22 Mark ii top dome Filter each

V 406-33* Mark ii Flange assembly each

* speCiaL ORdeR OnLy

hUDSOn™ VALVe WATeR LeVeL COnTROLLeRhV V1 hudson Valve each

hV K4 Repair Kit 4 with screen each

hV p05 diaphragm each

hV p07 Float complete with shut-off pad each

fOGmASTeR™ POW-R-JeT meChAniCAL fOGGeRFM 6309 FOgMasteR pow-R-Jet 6309 each

eqUiPmenT & PARTS VACUUM ContRoLLeRs | wAteR VALVes | FoGGeRs


THE SENTiNEl™VACUUM CONTROllER


MIsCeLLAneoUs LeG bAnDs | CReAMs | FIttInGs


iteM nO. COLOR or siZe desCRiptiOn Unit

OZZie™ LeG bAnDSOZ LegBand-Be Blue Velcro Leg Band 10/bag

OZ LegBand-gR green Velcro Leg Band 10/bag

OZ LegBand-OR Orange Velcro Leg Band 10/bag

OZ LegBand-Rd Red Velcro Leg Band 10/bag

OZ LegBand-wh white Velcro Leg Band 10/bag

OZ LegBand-yw yellow Velcro Leg Band 10/bag

OZ LegBand-n-gR neon green Velcro Leg Band 10/bag

OZ LegBand-n-OR neon Orange Velcro Leg Band 10/bag

OZ LegBand-n-pK neon pink Velcro Leg Band 10/bag

OZ LegBand-n-yw neon yellow Velcro Leg Band 10/bag

bOCk’S™ mULTi-LOCBC 2731-Be Blue Multi-Loc Leg Band each

BC 2731-gR green Multi-Loc Leg Band each

BC 2731-OR Orange Multi-Loc Leg Band each

BC 2731-Rd Red Multi-Loc Leg Band each

BC 2731-wh white Multi-Loc Leg Band each

BC 2731-yw yellow Multi-Loc Leg Band each

kenAG™ UDDeR CReAmKa d806* 28 oz Jar

Udder Cream12 Jars/Case

Ka d807 4 1/2 lb pail 6 pails/Case

bAG bALmss BaLM-10 10 oz Can

Bag Balm 12 Cans/Case

ss BaLM-14 4.5 lbs. pail 6 pails/Case

hAyneS™ LUbRi-fiLmhM hLFs 6 - 11.25 oz cans/cs spray

hM hLF-t4 12 - 4 oz tubes/cs tube

COW kiCk STOPKs 210060 nO KiCK Clamp Clamp each

Ks 210070 Component Rubber tip Replacement each

Ks 210080 Component spring Replacement each

OZLAnD™ SPLiT-GARD SAfeTy hObbLe

OZ hOBBLes split-gard safety hobble pair



PULSATOR RePAiR kiTM 7832 pulsator Repair Kit each

STAinLeSS STeeL miLk PAiLSwd 004-007 30 liters s.s. pail w/o lid each

wd 004-021 Lid for wd 004-007 pail each

enCORe™ UTiLiTy PAiLSsy 0500-ORa Orange 5 Quart pail with Reinforcing Ring each

MIsCeLLAneoUs PAILs | PULsAtoR RePAIR KIt


InFLAtIon CHAnGe FoRMULAMost U.S. inflations have a recommended use life of 1,200 individual cow milkings.

(Recommended inflation Use life) X (Number of Milking Units)

(Milkings per Day) X (Herd Size Being Milked)= Days

PRoDUCt DIsCLAIMeR The information presented in this price list is for the purpose of identification. Milk-Rite U.S.A. disclaims all warranties expressed or implied. Milk-Rite’s liability shall not, under any circumstances, exceed the amount paid to Milk-Rite U.S.A. for any product sold through this price list. References to manufacturer trademarks are for the purpose of cross reference. The products shown in this price list are not original equipment parts. The following trademarks and names are property of their respective owners: De Laval®, Super Flo®, Cling Soft®, Germania, Universal, and Harmony® are registered trademarks and product names of DeLaval Inc. Dairymaster is a registered trade name of the Dairymaster company Bou Matic and Flo Star® are registered trademarks and product names of Bou Matic LLC. Chore Boy®, Kleen Flo®, Nu Pulse® are registered trademarks and product names of the E-ZEE Milking Equipment Company. Conde® is a registered trademark of Westmoor Ltd. Conewango® is a registered trademark of the Conewango Products Corporation. Westfalia®, Surge®, Jet Flo®, Vacuum Saver®, Continental®, Mini Orbit®, Eclipse®, Rx®, Mini Cup®, Breaker Cup®, and Bio Milker® are registered trademarks and product names of GEA Farm Technologies.

MiLK-Rite east Corporate headquartersp.O. Box 9, 110 Lincoln streetJohnson Creek, wi 53038 Usa

phone: 1.800.558.0150 / Fax: 1.800.800.5254

MiLK-Rite west western supply Center4824 enterprise way Modesto, Ca 95356

phone: 1.800.927.4454 / Fax: 1.209.545.0272

www.milk-rite.com

2012/2013 usa product catalog - eagle diary direct usa... · slightly larger bore and mouth, cut...

Documents