2011 practice management annual conference top 6 pclaw tech support issues steven j. best, affinity...
TRANSCRIPT
2011 Practice Management Annual Conference
Top 6 PCLaw Tech Support Issues
Steven J. Best, Affinity Consulting Group, LLCLawrence Beharry, LexisNexis
September 23, 2011
22011 Practice Management Annual CIC Conference
Agenda – Top 6 PCLaw Issues
Introduction
1.Balancing GL to Bank Journals
2.A/R Mismatch - Client Ledgers vs. Billing Journal
3.Books Missing or “Looping” on Update
4.Unable To Open Document Within PCLaw
5.Bank Reconciliation Inconsistency
6.Changing The Lawyer That Is Synchronized With Outlook
Bonus Tips (Time Permitting): Outlook Best Practices, SQL Login Errors
Questions & Answers
32011 Practice Management Annual CIC Conference
Introduction
• Founding Partner of Affinity Consulting Group, LLC
• PCLaw Consultant since 1999• Time Matters Consultant since 2006
Affinity Consulting Group(770) [email protected]
Steven J. Best, ESQ.
42011 Practice Management Annual CIC Conference
Introduction
• Staff Customer Systems Engineer• 13 Years at LexisNexis
LexisNexis(866) 654-2381 [email protected]
Lawrence Beharry
52011 Practice Management Annual CIC Conference
Balancing GL to Bank Journals
62011 Practice Management Annual CIC Conference
Balancing GL to Bank Journals
Why doesn’t my cash balance equal my General Ledger? There is something very wrong. Fix it!
72011 Practice Management Annual CIC Conference
Balancing GL to Bank Journals
PROBLEM 1: General Bank Journal doesn’t equal the balance in the General Bank GL account• Reasons this can happen include:− Making Journal entries to Cash
− Removing entries in a prior, reconciled month
− Posting an expense recovery to General Bank GL
− Entering a write off to the General Bank GL
− Posting an allocated Accounts Payable or General Bank to GL
• Corrective Actions:− Remove the offending transaction if the month is open
− Enter a “reversing” transaction in the current month
− Encourage users to READ warning windows
− GL Adjustment – but monitor
− Use the GL Reconciliation Report monthly
− Create a Journal Entry to correct as a last resort
82011 Practice Management Annual CIC Conference
Balancing GL to Bank Journals
PROBLEM 2: Trust Bank Journal doesn’t equal the balance in the Trust Bank GL account
• Reasons this can happen include:
− Making Journal entries to Trust Bank
− Removing entries in a prior, reconciled month
− Posting an expense recovery to Trust GL
− Entering a WRITE OFF to the Trust GL
− Allocating a General Check to the Trust GL
− Posting an allocated Accounts Payable or General Bank to Trust GL
• Corrective Actions:
− Remove the offending transaction if the month is open
− Enter a “reversing” transaction in the current month if the problem month is closed and cannot be reopened
− Encourage users to READ warning windows
− GL Adjustment – but monitor closely
− Use the GL Reconciliation Report monthly
− Create a Journal entry to correct as a last resort
92011 Practice Management Annual CIC Conference
A/R Mismatch - Client Ledgers vs. Billing Journal
102011 Practice Management Annual CIC Conference
A/R Mismatch - Client Ledgers vs. Billing Journal
PROBLEM: When a client compares the Client Ledger to the Billing Fees Journal, they see a mismatch in A/R balances
Two Common Reasons For This Include:•it’s possible that Running multiple reports on screen while billing interrupts posting of transactions to tables; resulting in partial transactions (eg. Partial write down, partial invoice, bad receipt entry)•If un-doing an invoice when the network may be experiencing instability or other environmental issues (appropriate records don’t follow through to all of the relevant data tables)
112011 Practice Management Annual CIC Conference
Lawrence
A/R Mismatch - Client Ledgers vs. Billing Journal
122011 Practice Management Annual CIC Conference
A/R Mismatch - Client Ledgers vs. Billing Journal
Corrective Actions – First Steps:• Compare both reports to find out what entry is causing the imbalance - make sure
dates are the same• Determine which report is correct• Ensure the invoice tags show on the individual entries and that those invoices exist in
the Billing Fees Journal• A receipt could also cause a mismatch between the two reports. If it’s a receipt
mismatch, we need to agree that the ledger is always right, so one record in GBRcptA table for the corresponding invoice needs to be reduced− In some cases, the Reallocate Payment fix can be run with the assistance of Level 2 Support
to also address these types of issues particularly if this exact problem exists for multiple matters
132011 Practice Management Annual CIC Conference
A/R Mismatch - Client Ledgers vs. Billing Journal
Corrective Actions – Partial Invoice:• CTREE database− Use the Undo Bill function and type in the Matter and the problem Invoice Number
− Pretend to create a new bill with that problem invoice number, then when you reach the Billing Information screen, Click CANCEL
• SQL database− The two methods that work in CTREE will only work when there is a status “2” record in both
ARInv and TranIDX. Address this first with the assistance of Level 2 support.
142011 Practice Management Annual CIC Conference
Books Missing or “Looping” on Update
152011 Practice Management Annual CIC Conference
Books Missing or “Looping” on Update
PCLaw Books do not show at workstation or PCLaw LOOPS at “a newer version has been detected” upon updating.• Problem 1: After installing PCLaw at a workstation, you
open up the program and only the experimental books appear. What happened?
• Problem 2: After updating PCLaw at a workstation, you get a message that continually tells you that a newer version has been detected.
162011 Practice Management Annual CIC Conference
Books Missing or “Looping” on Update
Corrective Actions:• Most likely a network permissions issue• Check with IT person re: restrictions on the folder where the
PCLaw DATA folder resides• Check network policies re: user permissions to C:\Program
Files\• Check PCLawData\PCLaw.CFG file for proper paths• Looping usually occurs when SOME workstations don’t point
to the correct common folder
172011 Practice Management Annual CIC Conference
Unable To Open Document Within PCLaw
182011 Practice Management Annual CIC Conference
Unable To Open Document Within PCLaw
PROBLEM: When a client attempts to open a document in PCLaw, a pop-up window appears asking which application to use. Even if you choose an application it still is not able to open the document.• Common Causes and Corrections Actions:
1. The physical file does not exist in the location that PCLaw expects it to be.
Corrective Action: If the document doesn’t exist: Using Windows Explorer, search for the document by name. When found move the document to the appropriate location inside the PCLawDocs folder\Active\[Client Named]\[Matter Named] folder.
2. The Client name folder has been renamed
Corrective Action: In PCLaw, go to Document Manager and check the Document Properties. Ensure the path in the Source Path matches the actual document path. If it doesn’t match then you will need to run “Fix Doc Paths” to rename the Source Path to match the actual physical doc path – NOTE: For a single matter only. If it doesn’t work then you need to call L2
192011 Practice Management Annual CIC Conference
Common Causes and Corrections Actions (con’t):
3. The bookpathdocs string registry value is incorrect on that computer.Corrective Action: •Go to a workstation that can open the documents successfully and take note of the bookpathdocs value in that station’s Registry•Or open the docpath.ini file located in Statdata and take note of the bookpathdocs value•Then on the problematic workstation go to the Registry and modify the bookpathdocs registry string value to match the correct path.
Unable To Open Document Within PCLaw
202011 Practice Management Annual CIC Conference
Bank Reconciliation Inconsistency
212011 Practice Management Annual CIC Conference
Bank Reconciliation Inconsistency
“An Inconsistency Has Been Detected….”
• PROBLEM: When beginning a bank reconciliation, the user receives a message that an ‘INCONSISTENCY HAS BEEN DETECTED, WOULD YOU LIKE PCLAW TO FIX THE PROBLEM?’
• Common Reasons This May Occur Are:− The User changes a previously reconciled item despite the
warning NOT to do so
− The User deletes a previously reconciled item
− The User back-dates a new item into a reconciled period
222011 Practice Management Annual CIC Conference
Bank Reconciliation Inconsistency
Corrective Actions:• IF THE PROBLEM ITEMS ARE IN THE IMMEDIATE PRIOR BANK RECONCILIATION
− MAKE A BACKUP and then reopen the bank reconciliation for the prior period and re-reconcile that period, clearing the inconsistent items and then coming forward to the current bank reconciliation
• IF THE PROBLEM ITEMS ARE OLDER THAN THE IMMEDIATE PRIOR BANK RECONCILIATION
− Go past the inconsistency errors into the bank reconciliation
− Analyze if there are transactions that were cleared in a prior period that have now become un-cleared – this typically represents the inconsistency
− Encourage “SHIRLEY” to reconcile all of the items that she can and have her identify the problem items
− Most likely, these items will cause the CALCULATED bank journal balance to NOT MATCH the ACTUAL bank journal balance. Most times the difference here is equal to the total of the problem items
− Note the ENTRY NUMBERS of the problem items by looking them up in the Bank Journal
− Call L2 support with your findings. They will likely recommend you go into the GBANKCOMMINF/ TBANKCOMMINF tables and change the BANKRECID field to “1” on each of the problem entries
− Re-Enter the Bank Reconciliation and the inconsistency message should be corrected
232011 Practice Management Annual CIC Conference
Changing The Lawyer That Is Synched With Outlook
242011 Practice Management Annual CIC Conference
Changing The Lawyer That Is Synched With Outlook
PROBLEM: When a lawyer is using a workstation that was previously occupied by a different lawyer, the Outlook Connection needs to be reset for the new lawyer to synchronize appointments and contacts correctly.
• How do I do this?− Support Center link: Article ID 10209
http://support.lexisnexis.com/PCLaw10/record.asp?ArticleID=10209
− Remove all appointments and contacts in Outlook for the lawyer you are removing from the synch
− Remove any PCLaw Task Entry in Outlook
− Close Outlook
− Remove the registry entries pertaining to the Outlook Integration:
• Outlook_SpecialTaskID, Outlook_SpecialTaskStoreID Outlook,_StationIdentification
− Disable all PCLaw Connection Settings related to the synchronization of appointments and contacts
− Re-enable the connection settings
252011 Practice Management Annual CIC Conference
Bonus Tips
262011 Practice Management Annual CIC Conference
Bonus Tips
Prior to setting up Outlook Connection:
•First ensure that the support positioning requirements are fully met (Article ID 9201) Example: The Outlook Connection is not supported on Terminal Services – PCLaw Core functionality only•Ensure that Outlook is not already synchronizing with another third party application ex. BlackBerry or Google Calendar
• If so then you must discontinue synchronizing with those applications otherwise this can cause duplication of contacts and/or appointments
While Using the Outlook Connection:
•Anti-virus programs can cause interference
•After the initial synchronization when inputting any new contacts/appointments tasks it is a good practice to only enter them through PCLaw and allow them to get them to synchronized over to Outlook
Outlook Connection Best Practices
272011 Practice Management Annual CIC Conference
Troubleshooting SQL Login (Error 8)Problem: When logging into PCLaw SQL/Enterprise, you receive the following error message “Error: 8 while trying to access PCLaw database” and then PCLaw closes.
Reason for the Error: Essentially PCLaw is not able to communicate with the SQL server database
Possible Causes and Corrective Actions
1.Incorrect SQL server name in the Geninfo file after migrating the SQL database from one server to another. Corrective Action: Contact 2L for assistance to change Geninfo to reflect the new server name: NOTE: To prevent this from occurring it is best to use the PLSQLMOV.exe file located in the PCLaw program file directory. This will prompt you to enter all relevant info about the new server and take care of all necessary changes.
2.The SQL server authentication is not set to “Mixed Mode”Corrective Action: Use SQL Server Management studio to change the authentication method to Mixed mode. NOTE: Once this change is made you will need to restart the SQL services.
Bonus Tips
282011 Practice Management Annual CIC Conference
Possible Causes and Corrective Actions
•TCP/IP and/or named pipes are disabled as SQL server protocols. It is a requirement for these protocols to be enabled for PCLaw to function.Corrective Action: Enable these protocols using the SQL Server Configuration Manager NOTE: Once this change is made you will need to restart the SQL services.
•In SQL, the PCLAWUSER_#####(serial#) user account does not contain the correct configuration i.e. the correct password or the correct permissions.Corrective Action: Ensure that the password for PCLAWUSER_##### is the same as the Admin password for PCLaw and that it has DBOwner and Public access to the PCLawDB_##### database.•The client’s firewall on the server could be blocking SQL traffic.Corrective Action: The default TCP port for SQL Server is 1433 and the default UDP port for SQL Browser is 1434. Configure the firewall to allow network traffic that is related to SQL Server and to the SQL Server Browser service.
Troubleshooting SQL Login (Error 8)
Bonus Tips
292011 Practice Management Annual CIC Conference
Steven J. BestAffinity Consulting Group(770) [email protected]
Questions & Answers
Lawrence BeharryLexisNexis(866) 654-2381 [email protected]