2011 lecroy product line card

Test & Measurement Line Card

Beyond the Limits

OscillOscOpesOscillOscOpes

labMaster 9 Zi-A Waveexpert 100HWaveMaster 8 Zi-A (sDA/DDA 8 Zi-A)

Wavepro 7 Zi-A (sDA/DDA 7 Zi-A)

WaveRunner 6 Zi

Bandwidth 13 GHz to 45 GHz 20 GHz to 100 GHz 4 GHz to 45 GHz 1.5 GHz to 6 GHz 400 MHz to 4 GHz

Bandwidth Upgradeable

Yes Yes Yes Yes N/A

standard Memory

20 Mpts/Ch 4 Mpts 20 Mpts/Ch 32 Mpts (interleaved)

10 Mpts/Ch 16 Mpts/Ch 32 Mpts (interleaved)

Max. Memory 256 Mpts/Ch 510 Mpts 768 Mpts/Ch 256 Mpts/Ch 64 Mpts/Ch 128 Mpts (interleaved)

Rise Time 8 ps to 32.5 ps 18 ps to 1 ps 8 ps to 95 ps 70 ps to 235 ps 75 ps to 875 ps

channels Up to 20 4 4 4 4

Max sampling Rate2

120 GS/s 10 Ms/s 120 GS/s 40 GS/s 40 GS/s

Display 15.3" WXGA Color Touch Screen

10.4" SVGA Color Touch Screen

15.3" WXGA Color Touch Screen



Trigger Types Edge, Width, Glitch, Pattern, Video, HDTV,

Runt, Slew Rate, Interval (Period),

Dropout, Qualified, Cascade (Sequence) Trigger, High-speed

Serial Protocol Trigger1

Sequential and CIS Edge, Width, Glitch, Pattern, Video, HDTV,




Edge, Width, Glitch, Pattern, Video, HDTV,




Edge, Width, Glitch, Pattern, Video, HDTV, Runt, Slew Rate,

Interval (Period), Dropout, Qualified

serial Trigger and Decode Options

I2C, SPI, UART, RS-232, CAN, LIN, FlexRay, Audio, ARINC 429,

MIL-STD-1553, D-PHY, DigRF 3G, DigRF v4, USB

N/A I2C, SPI, UART, RS-232, CAN, LIN, FlexRay, Audio, ARINC 429,






Applications software Options

USB 3.0, SAS2, SATA, PCI Express, HDMI, DisplayPort, XAUI,

FB-DIMM, InfiniBand, Fibre Channel, Ethernet,

MIPI, DDR, UWB, Spectrum Analysis,

EMC, Optical Recording, Jitter & Timing,

Digital Filter, Advanced Customization, Disk Drive

Measurement, Cable De-embedding,

8b/10b Decode, Serial Data Mask

TDR, S-parameter, Eye Diagram Analysis, Jitter Measurement,

Virtual Probing, Equalizer Emulation

USB 3.0, SAS2, SATA, PCI Express, HDMI, DisplayPort, XAUI,

FB-DIMM, InfiniBand, Fibre Channel, Ethernet,

MIPI, DDR, UWB, Spectrum Analysis,


Digital Filter, Advanced Customization, Disk Drive

Measurement, Cable De-embedding,

8b/10b Decode, Serial Data Mask

PCI Express, SATA, USB2.0, Ethernet, HDMI, MIPI, DDR, Spectrum Analysis,


Digital Filter, Advanced Customization, Disk Drive Measurement,

Demodulation, PowerMeasure,

Cable De-embedding

Jitter and Timing Analysis, Digital Filter, Disk

Drive Measurement, PowerMeasure Analysis,

Spectrum Analysis, Advanced Customization,

Serial Data Mask, Ethernet, USB 2.0 Compliance Test,

EMC Pulse Parameter, Electrical Telecom

Mask Test, Statistics, Advanced Math

Mixed signal Options

250 MHz or 500 MHz 18 Ch or 36 Ch

N/A 250 MHz or 500 MHz 18 Ch or 36 Ch



connectivity and storage

USB Host for Storage LAN for PC LXI for PC

GPIB for PC1

USB Host for Storage LAN for PC

GPIB for PC1


GPIB for PC1


GPIB for PC1


GPIB for PC1

2

1 Optional


MsO Xs-B Wavesurfer MXs-B WaveJet 300A WaveAce 200 WaveAce 100

Bandwidth 400 MHz to 1 GHz 200 MHz to 1 GHz 100 MHz to 500 MHz 60 MHz to 300 MHz 40 MHz to 100 MHz

Bandwidth Upgradeable

N/A N/A N/A N/A N/A

standard Memory

12.5 Mpts/Ch 25 Mpts Interleaved

12.5 Mpts/Ch 25 Mpts Interleaved

500 kpts/Ch 2 Ch: 9 kpts/Ch18 kpts Interleaved4 Ch: 10 kpts/Ch

20 kpts Interleaved

4 kpts/Ch

Rise Time 875 ps to 300 ps 1.75 ns to 300 ps 3.5 ns to 750 ps 5.8 ns to 1.2 ns 8.8 ns to 3.5 ns

channels 4 + 18 4 2, 4 2, 4 2

Max sampling Rate2

2.5 GS/s or 10 GS/s 2.5 GS/s or 10 GS/s 1 GS/s or 2 GS/s 1 GS/s to 2 GS/s 250 MS/s to 500 MS/s

Display 10.4" SVGA Color Touch Screen

10.4" SVGA Color Touch Screen

7.5" VGA Color 5.7" QVGA Color 5.7" QVGA Color

Trigger Types Edge, Width, Glitch, Pattern, Video, HDTV, Runt, Slew Rate, Interval (Period),

Dropout, Qualified

Edge, Width, Glitch, Pattern, Video, HDTV,


Dropout, Qualified

Edge, Width, Video, Interval (Period),

Pulse Count

Edge, Width, Video, Slope, Alternate

Edge, Width, Video, Slope, Alternate

serial Trigger and Decode Options

I2C, SPI, UART, RS-232, CAN, LIN, FlexRay, Audio,

MIL-STD-1553, ARINC 429, D-PHY, DigRF 3G,

DigRF v4, USB

I2C, SPI, UART, RS-232, CAN, LIN, FlexRay, Audio,

MIL-STD-1553, ARINC 429, D-PHY, DigRF 3G,

DigRF v4, USB

N/A N/A N/A

Applications software Options

Electrical Telecom Mask Test ,

Windows Lockout

Standard: Extended Math,

Advanced Trigger, LabNotebook

Optional: Electrical Telecom

Mask Test, Windows Lockout

N/A N/A N/A

Mixed signal Options

250 MHz, 1 GS/s N/A N/A N/A N/A

connectivity and storage

USB Host for StorageLAN for PC

GPIB for PC1

USB Host for Storage LAN for PC

GPIB for PC1

USB Host for Storage USB Device for PC

LAN for PC1

GPIB for PC1


LAN for PC2

RS-232 for PC3


RS-232 for PC

3

1 Optional 2 Maximum sample rate is sometimes achieved via operating in 2-channel mode. 3 2 Ch models only.


4

NEW LabMaster 9 Zi-AHigh Bandwidth Modular Oscilloscope Systems

High Bandwidth Modular Oscilloscope System

n Multi-channel operation at the highest bandwidth – 5 channels @ 45 GHz – 10 channels @ 30 GHz – 20 channels @ 20, 16, or 13 GHz

n Bandwidth and channel upgrade flexibility

n ChannelSync™ for precise synchronization of all acquisition modules

n Server-class CPU (33.6 GHz effective clock rate, up to 192 GB RAM)

n Lowest jitter noise floor (125 fsrms) and highest time base stability.

LabMaster enables the leading-edge technologies that provide enhanced high-speed data transfer and communication—such as 28 – 32 Gb/s SERDES, multi-lane serial data (40/100 GbE, PCIe Gen3), and optical coherent modulation communications.

NEW WaveRunner® HRO 6 Zi12-bit High Resolution Oscilloscope

Superior Validation, Debug, Analysis

n 12-bit ADC resolution

n 400 MHz and 600 MHz models

n 256 Mpts/Ch

Designed for the medical, automotive, power, and electromechanical markets, the WaveRunner HRO has higher resolution and measurement precision than 8-bit alternatives.

Learn More: www.lecroy.com/labmaster

Learn More: www.lecroy.com/waverunner

ChannelSync precisely synchronizes all acquisition modules. This screen image shows four differential signals input to four different acquisition modules and all signals are perfectly synchronized.

12-bit High ResolutionA common application for high resolution products is the ability to view a small amplitude signal within a larger voltage signal. The 4096 discrete amplitude levels and 55 dB SNR of the WaveRunner HRO 6 Zi can detect much smaller voltage signals with more clarity than an 8-bit oscilloscope.

12-bit 8-bit

n 55 dB SNR

n 1 mV vertical sensitivity@ full bandwidth

n Up to ±400 V offset capability

TesT & MeAsUReMenT insTRUMenTsTesT & MeasureMenT InsTruMenTs

5

Arbitrary Waveform Generators

High Resolution Generators for Analog and Digital Waveform GenerationArbStudio series of arbitrary waveform generators (AWG) generates signals up to 125 MHz with high sample rate, long memory and high resolution as well as a variety of operating modes, modulation capabilities and a digital pattern generator. The software interface that controls the hardware is designed to simplify waveform creation with an intuitive navigation tree which allows easy access to all channels along with special views for controlling basic function generator outputs as well as pulse width modulation (PWM) capabilities.

Logic Analyzer 16 Channels, 1 GS/s, 100 MHz Input plus I2C, SPI and UART AnalysisLogicStudio 16 provides 16 channels with a high sample rate of 1 GS/s and maximum input of up to 100 MHz. The software provides a lively, dynamic waveform display with a smart, intuitive user-interface that is easily navigated by a few basic mouse clicks. LogicStudio provides a lot of tools for digital debug including timing cursors, unique zooming and panning of waveforms, a persistence display and a history mode which can replay old data captures. Additionally, protocol analysis for I2C, SPI and UART is included to decode waveforms as they are captured and provide the ability to trigger on specific address or data packets on the bus.

Network Analyzer High-bandwidth, Multi-port S-parameter MeasurementsThe SPARQ signal integrity network analyzers connect directly to the device-under-test and to PC-based software through a single USB connection for quick, multi-port S-parameter measurements. SPARQ is the ideal instrument for characterizing multi-port devices common in signal integrity applications at a fraction of the cost of traditional methods.

It is ideal for: n Development of measurement-based simulation models n Design validation n Compliance testing n High-performance TDR n PCB testing n Portable measurement requirement

PeRT3 Test System Protocol-enabled Receiver and Transmitter Tolerance TesterThe PeRT3 (Protocol-enabled Receiver and Transmitter Tolerance Tester) fills the space between physical layer test and protocol test, providing a new and more intelligent capability for performance testing of receivers and transmitters. Designed to meet the test needs of engineers working with serial data transceivers and other high-speed serial data communication systems, the LeCroy PeRT3 Test System is not just a new instrument, it is an entirely new instrument class.

Download the ArbStudio Software at www.lecroy.com/ArbStudio

Try it Free—Download software here www.lecroy.com/LogicStudio

Try it Free—Download software here www.lecroy.com/SPARQ

LEARN MORE AT: www.lecroy.com/PeRT3

6

pROTOcOl AnAlyZeRsProtocol AnAlyzers

The following overview includes the most popular lecroy protocol analyzers. For more information please visit http://www.lecroy.com/protocolAnalyzer

DDR3

NEW Kibra 380 AnalyzerThe LeCroy Kibra 380 is the industry first stand-alone DDR3 protocol analyzer that provides comprehensive DDR3 bus and JEDEC timing analysis. Small and portable, the Kibra 380 is controlled over USB using any Windows-based PC and offers state and timing waveform displays to allow fast debugging of DDR3 systems and memory controllers. Using non-intrusive slot interposer probes, the system provides loss-less capture of address, command and control signals (ADD/CMD/CNTRL). By focusing on state-based capture and excluding the data signals, the Kibra 380 allows quick analysis of DDR3 transactions. With its high impedance probing and specialized trigger logic, this self-contained solution can monitor a fully loaded memory bus and identify over 65 JEDEC bus event and timing violations in real time. Text-based decoding of commands including all physical address attributes (RA, CA, BA, CS) allow users to see and verify JEDEC ordering violations.

PCI Express®

Summit™ T3-16 Analyzer2.5 GT/s 5 GT/s 8 GT/s The Summit T3-16 is LeCroy’s highest performance PCI Express protocol analyzer, and supports PCI Express 3.0; data rates of 2.5 GT/s, 5 GT/s and 8 GT/s; full data capture on bidirectional lane widths of x1, x2, x4, x8 and x16; and a full 8 GB of trace memory. The system offers advanced features such as performance monitoring, LTSSM, equalization decodes and much more.

Summit Z3-16 Exerciser2.5 GT/s 5 GT/s 8 GT/s The Summit Z3-16 is LeCroy’s fourth generation protocol exerciser, with support for PCI Express at the Gen3 data rates of up to 8 GT/s. The Summit T3-16 Analyzer and Summit Z3-16 Exerciser provide a complete test and development system for engineers working on PCI Express 3.0 designs.

NEW Summit T3-8 Analyzer2.5 GT/s 5 GT/s 8 GT/s The Summit T3-8 is a new protocol analyzer for the highest transfer speeds currently supported by the PCI Express specification, the PCI Express 3.0 protocol at data rates of 8 GT/s. The Summit™ T3-8 Protocol Analyzer provides the full, powerful feature set of the Summit T3-16 protocol analyzer but at close to half the physical size and at significantly lower cost. The Summit T3-8 protocol analyzer system can support lane widths up to x8 in a single configuration and also support up to x16 when combined together with another Summit T3-8 protocol analyzer.

NEW Summit T28 Analyzer2.5 GT/s 5 GT/s The Summit T28 is a new protocol analyzer that provides a powerful and extremely cost-effective solution for any applications requiring PCIe 2.0 speeds and functionality. The new compact Summit™ T28 Protocol Analyzer features a small chassis footprint while maintaining (for lane widths up to x8) the same data recording and analysis features found in the high-end Summit T2-16 protocol analyzer. The Summit T28 protocol analyzer supports PCIe® data transmission rates up to 5 GT/s and data lane widths up to x8 in a single compact unit.

ProtoSync™ Oscilloscope Decode2.5 GT/s 5 GT/s 8 GT/s Provided as an option to LeCroy’s WaveMaster® and WavePro® Series of oscilloscopes, ProtoSync™ goes beyond simple decode annotation and provides the intuitive LeCroy CATC Trace and BitTracer views of the captured waveform, with a time and zoom correlation of physical layer signals, protocol packets, and logic analyzer byte views on a single instrument.

7

pROTOcOl AnAlyZeRsProtocol AnAlyzers

Voyager™ M3i Protocol Verification System1.5M 12M 480M 5G The Voyager M3i is LeCroy’s 6th generation USB protocol verification system designed for the next evolution of universal serial bus known as SuperSpeed USB. Leveraging LeCroy’s extensive expertise in high-speed serial data analysis, the Voyager provides 100 % accurate protocol capture of both USB 2.0 and 3.0 at data rates up to 5 Gb/s.

USB Advisor™ T3 Analyzer 1.5M 12M 480M 5G The USB Advisor T3 protocol analyzer is an inexpensive, small form-factor, but full featured analysis system for those testing USB 3.0 and USB 2.0 devices. It captures, displays, and analyzes bus traffic using the CATC Trace display software. It automatically highlights protocol errors while displaying a chronological list of packets with full decoding of USB device classes.

USBMobile™ T2 Analyzer1.5M 12M 480M The USBMobile T2 is the industry’s smallest, most affordable hardware-based USB 2.0 protocol analyzer family that combines the defacto standard CATC Trace display with powerful analysis features. The USBMobile fits into a single PCMCIA slot in a laptop computer yet provides much of the same lab quality protocol analysis offered in top-of-the-line USB analyzers.

Conquest™ Analyzer1.5M 12M 480M The Conquest Analyzer provides comprehensive USB analysis features at an extraordinary price point. Comprehen-sive USB device level decoding makes it easy to understand and debug transactions occurring at the system level. Designed for easy setup with time saving features like predefined trigger settings, Conquest is equally suited for first-time and advanced users.

USB 3.0 Test Suites1.5M 12M 480M 5G LeCroy is the only company that offers a complete line of USB 3.0 test solutions covering transmitter test to protocol test, and every step in between for comprehensive verification, debug and compliance, through our complete line of oscilloscopes, receiver test and protocol test solutions. See www.lecroy.com for more information on USB 3.0 bundles.

Universal Serial Bus (USB)

Serial Attached SCSI (SAS) and Serial ATA (SATA)

Sierra™ M6-4 Protocol Verification System 1.5G 3G 6G The Sierra M6-4 SAS/SATA test solutions support data rates up to 6 Gb/s, and provide analysis, traffic generation, emulation, error injection, and compliance test capabilities in one flexible platform. The Sierra product family sets new standards for performance while incorporating a complete set of features in a single, economical system.

Sierra M6-2 Protocol Verification System1.5G 3G 6G The Sierra™ M6-2 system provides an economical alternative to the industry-leading Sierra M6-4 for customers that require only 1 or 2 SAS/SATA ports. While providing all of the traffic generation, emulation, error injection, and compliance test capabilities of the M6-4 the Sierra M6-2 delivers this in a more compact package with significant cost savings.

More LeCroy protocol analyzers are available for:

pROBesProbes

High Bandwidth probing solutionDA18000

The DA18000 is a very high bandwidth DC coupled differential amplifier with a true 100 Ω balanced input. It features high common mode rejection and low noise. The amplifier has unity gain, to maximize the signal to noise performance when used with the lower amplitude signal voltages common in higher data rate systems. The DA18000 is supplied with a short pair of input cables which are matched to an electrical propagation length of 2.5 ps. These cables eliminate the need to deskew and calibrate input channels for differential match. The DA18000 utilizes third generation digital response equalization for the most accurate magnitude and phase response.

Wavelink® Differentialprobes (4 GHz – 25 GHz)D610/D620, D410/D420D600A-AT, D300A-AT, D500PT, D610-PT, D620-PT, D410-PT, D420-PT

WaveLink® probes provide industry leading technology for wideband signal connection to test instruments. The first differential probes to employ SiGe technology, they deliver full system bandwidth when used with WaveRunner, WavePro, WaveMaster, DDA, and SDA oscilloscopes up to 25 GHz.

Differential probes (200 MHz – 1.5 GHz)ZD1500, ZD1000, ZD500, ZD200

High bandwidth, excellent common-mode rejection ratio (CMRR) and low noise make these active differential probes ideal for applications such as automotive development (e.g. FlexRay) and failure analysis, as well as wireless and data communication design. The ProBus interface allows sensitivity, offset and common-mode range to be displayed on the oscilloscope screen.

Zs series High impedance Active probes ZS1500, ZS1000, ZS1500-QUADPAK, ZS1000-QUADPAK

The ZS Series probes provide high impedance and an extensive set of probe tips and ground accessories to handle a wide range of probing scenarios. The high 1 MΩ input resistance and low 0.9 pF input capacitance mean this probe is ideal for all frequencies. The ZS Series probes provide full system bandwidth for all LeCroy oscilloscopes having bandwidths of 1 GHz and lower.

High Voltage Differential probesADP305, ADP300, AP031

Low cost active differential probes are intended for measuring higher voltages. The differential techniques employed permit measurements to be taken at two points in a circuit without reference to the ground, allowing the oscilloscope to be safely grounded without the use of opto-isolators or isolating transformers.

current probesCP031, CP030, AP015, CP150, CP500, DCS015

LeCroy current probes reach bandwidths of 100 MHz, peak currents of 700 A and sensitivities of 10 mA/div. Use multiple current probes to make measurements on three-phase systems or a single current probe with a voltage probe to make instantaneous power measurements. LeCroy current probes enable the design and testing of switching power supplies, motor drives, electric vehicles, and uninterruptible power supplies.

High Voltage passive probesPPE1.2KV, PPE20KV, PPE2KV, PPE4KV, PPE5KV, PPE6KV

The PPE Series includes five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV. All fixed-attenuation, standard probes automatically rescale compatible LeCroy oscilloscopes for the appropriate attenuation of the probe.

passive probesPP008-1, PP009-1, PP007-WR-1, PP007-WS-1, PP005A, PP006A, PP010-1, PP011-1

LeCroy passive probes automatically scale the oscilloscope waveforms without user input. Passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400 V, some as high as 600 V.

© 2011 by LeCroy Corporation. All rights reserved. Specifications, prices, availability, and delivery subject to change without notice. Product or brand names are trademarks or requested trademarks of their respective holders.

PCI Express® is a registered trademark and/or service mark of PCI-SIG.

PLC-02Jun11

local sales offices are located throughout the world. Visit our website to find the most convenient location.

1-800-5-LeCroy www.lecroy.com

2011 lecroy product line card

Documents