AR77.39-P-3695QA Remove/install trunk luggage cover limit switch 11.12.02MODEL 209.4

P77.39-2085-091 Partition 4 Bracket 6 Bolt2 Pin 5 Connector S84/9 Variable soft top well limit 3 Nuts switch

Remove/install

Risk of injury when performing check and Before working in the area of the roll bar, pull AS91.00-Z-0003-01QA Danger!

repair work in area of roll bar out the rear head restraints by hand.Keep body parts out of the area where the roll bar extends.

1 Partially open soft top Leave soft top compartment lid and soft

top bow in upright position2 Cover vehicle in rear area

To prevent scratching the paint during assembly work.

3 Unhook partition (1).4 Pull out pin (2)

Installation: Replace bolt (2).5 Separate connector (5)6 Unscrew nuts (3) and remove bracket (4) *BA68.50-P-1001-01A

Nut for sun shade mountwith variable soft top well limit switch (S84/9)

7 Unscrew bolt (6) and remove variable soft top well limit switch (S84/9) from bracket (4).

8 Install in the reverse order

Curtains/sun shades

Number Designation Model 209.4

8 ( 0.8 )BA68.50-P-1001-01A Nut for sun shade mount Nm

Copyright Daimler AG 5/21/11 G/01/08. This WIS printout will not be recorded by the update service. Page 1