2009 swift catalogue 48pgs sans pricesswifts.co.za/wp-content/uploads/2013/06/edge-catalogue.pdf ·...
TRANSCRIPT
www.swifts.co.za
'Swifts' as we passionately like to call our company, was founded in January 1979 by Peter
and Anne Gillespie in Johannesburg, South Africa as a sister company to the other national
'Swift Industrial Supply' companies in the early 1980's. The objective back then was to
position 'Swifts' as a one-stop industrial supplier to the very lucrative gold mines and heavy
duty industry in and around the then P.W.V area through service, price and product
excellence.
Today, some 30 years on, the same winning business principles are being applied at 'Swifts'.
However, our core business now focuses on two very competitive new brands in 'EDGE' and
'HERSCHELL' products, and their development in today's retail market. Doug Herschell
joined Swifts in 1986 heading the lubricant and aerosol manufacturing division, for a single
product back then to currently producing 180 new lines under the 'HERSCHELL' brand which
is a milestone in itself.
As a manufacturer and importer of our own specialised products, we see enormous
opportunity for our industrially tried, tested and recognised products in the retail market
under our own branding. Our venture is a completely new challenge in an otherwise highly
competitive market, but equipped with our adherence to today's stringent industrial
standards, our logical problem solving capabilities, our competitive pricing, our proven
quality and wealth of technical knowledge, we feel confidently assured of success. Our
unique and informative sales techniques and ongoing technical after-sales back-up,
supplements a new approach to an otherwise technically deprived market sector. It is this
approach coupled with other important business fundamentals that separates us from
others and is a primary factor in the success and rapid growth phase of our new products in
the market. Spear-headed by Basil Gard, Peter and Grant Gillespie and Doug Herschell, our
retail and industrial team is well equipped to deal with the demands of both markets and we
are confident in establishing both 'EDGE' and 'HERSCHELL' brands as market leaders in the
cutting tool and lubricant retail market sectors respectively.
We aim to establish ourselves in the lubricant and cutting tool markets as a specialised,
problem solving company through the manufacturing and importing of premium quality
products at competitive prices and the proactive involvement with our clients on product
training and educational matters.
Introduction
Our Vision for the Future
INDUSTRIAL SUPPLY CO. (Tvl) (Pty) LtdTHE
MILLED & POLISHED HSS STRAIGHT SHANK DRILLS 1 - 2
MILLED & POLISHED HSS REDUCED SHANK DRILLS 3
INDUSTRIAL PRECISION GROUND HSS S/S DRILLS 4 - 8
MORSE TAPER SHANK DRILLS 9 - 11
MORSE TAPER SLEEVES 12
EXTREME INDUSTRIAL TRI-SHANK 13
DOUBLE ENDED STUB DRILLBITS 14
STEEL DRILL BIT SETS 15 - 16
WOOD DRILL BIT SETS 17
MASONRY / CONCRETE / SDS DRILL BIT SETS 17
MASONRY DRILLBITS 18
LONG MASONRY DRILLBITS 19
CONCRETE DRILLBITS 20
LONG CONCRETE DRILLBITS 21
GLASS AND TILE DRILLBITS 21
SDS / CONCRETE DRILLBITS 22 - 23
WOOD BRAD POINT DRILLBITS 24
WOOD FORSTNER DRILLBIT 24
WOOD FLAT DRILLBITS 25
LONG WOOD FLAT DRILLBITS 26
MACHINE AUGERS HEX SHANK 27
MACHINE AUGERS LONG 27
SCOTCH EYE AUGERS 28
JIGSAW BLADES 29
"EDGE" DIAMOND CUTTING DISCS SEGMENTED 30
"EDGE" DIAMOND CUTTING DISCS TURBO FLAT 30
"EDGE" DIAMOND CUTTING DISCS CONTINUOUS 30
BLU MOL BI-METAL HOLE SAWS 31 - 33
REMGRIT CARBIDE EDGE HOLE SAWS 33
BLU MOL BI-METAL HOLE SAW KIT'S 33
EDGE BI-METAL HOLE SAWS 34 - 35
EDGE BI-METAL HOLE SAW MANDRELS 35
BLU MOL BI-METAL HOLE SAW MANDRELS 36
PILOT DRILLS 36
TAPS & DIES 37 - 38
PRODUCT IDENTIFICATION & DISPLAY 39 - 40
HERSCHELL SPECIALISED LUBRICANTS Flip to back page
Description Page
Index
Madein
RSA
CF C O 'SN
O
YZ LO DN NE E I FR
EDGE PRECISION CUTTING TOOLS
P. O. Box 23, Germiston 1400
Reg. No: 1968/007/521/01
Tel: 011-827-5935
Fax: 011-824-2125
Email: [email protected]
'Swifts' as we passionately like to call our company, was founded in January 1979 by Peter
and Anne Gillespie in Johannesburg, South Africa as a sister company to the other national
'Swift Industrial Supply' companies in the early 1980's. The objective back then was to
position 'Swifts' as a one-stop industrial supplier to the very lucrative gold mines and heavy
duty industry in and around the then P.W.V area through service, price and product
excellence.
Today, some 30 years on, the same winning business principles are being applied at 'Swifts'.
However, our core business now focuses on two very competitive new brands in 'EDGE' and
'HERSCHELL' products, and their development in today's retail market. Doug Herschell
joined Swifts in 1986 heading the lubricant and aerosol manufacturing division, for a single
product back then to currently producing 180 new lines under the 'HERSCHELL' brand which
is a milestone in itself.
As a manufacturer and importer of our own specialised products, we see enormous
opportunity for our industrially tried, tested and recognised products in the retail market
under our own branding. Our venture is a completely new challenge in an otherwise highly
competitive market, but equipped with our adherence to today's stringent industrial
standards, our logical problem solving capabilities, our competitive pricing, our proven
quality and wealth of technical knowledge, we feel confidently assured of success. Our
unique and informative sales techniques and ongoing technical after-sales back-up,
supplements a new approach to an otherwise technically deprived market sector. It is this
approach coupled with other important business fundamentals that separates us from
others and is a primary factor in the success and rapid growth phase of our new products in
the market. Spear-headed by Basil Gard, Peter and Grant Gillespie and Doug Herschell, our
retail and industrial team is well equipped to deal with the demands of both markets and we
are confident in establishing both 'EDGE' and 'HERSCHELL' brands as market leaders in the
cutting tool and lubricant retail market sectors respectively.
We aim to establish ourselves in the lubricant and cutting tool markets as a specialised,
problem solving company through the manufacturing and importing of premium quality
products at competitive prices and the proactive involvement with our clients on product
training and educational matters.
Introduction
Our Vision for the Future
INDUSTRIAL SUPPLY CO. (Tvl) (Pty) LtdTHE
MILLED & POLISHED HSS STRAIGHT SHANK DRILLS 1 - 2
MILLED & POLISHED HSS REDUCED SHANK DRILLS 3
INDUSTRIAL PRECISION GROUND HSS S/S DRILLS 4 - 8
MORSE TAPER SHANK DRILLS 9 - 11
MORSE TAPER SLEEVES 12
EXTREME INDUSTRIAL TRI-SHANK 13
DOUBLE ENDED STUB DRILLBITS 14
STEEL DRILL BIT SETS 15 - 16
WOOD DRILL BIT SETS 17
MASONRY / CONCRETE / SDS DRILL BIT SETS 17
MASONRY DRILLBITS 18
LONG MASONRY DRILLBITS 19
CONCRETE DRILLBITS 20
LONG CONCRETE DRILLBITS 21
GLASS AND TILE DRILLBITS 21
SDS / CONCRETE DRILLBITS 22 - 23
WOOD BRAD POINT DRILLBITS 24
WOOD FORSTNER DRILLBIT 24
WOOD FLAT DRILLBITS 25
LONG WOOD FLAT DRILLBITS 26
MACHINE AUGERS HEX SHANK 27
MACHINE AUGERS LONG 27
SCOTCH EYE AUGERS 28
JIGSAW BLADES 29
"EDGE" DIAMOND CUTTING DISCS SEGMENTED 30
"EDGE" DIAMOND CUTTING DISCS TURBO FLAT 30
"EDGE" DIAMOND CUTTING DISCS CONTINUOUS 30
BLU MOL BI-METAL HOLE SAWS 31 - 33
REMGRIT CARBIDE EDGE HOLE SAWS 33
BLU MOL BI-METAL HOLE SAW KIT'S 33
EDGE BI-METAL HOLE SAWS 34 - 35
EDGE BI-METAL HOLE SAW MANDRELS 35
BLU MOL BI-METAL HOLE SAW MANDRELS 36
PILOT DRILLS 36
TAPS & DIES 37 - 38
PRODUCT IDENTIFICATION & DISPLAY 39 - 40
HERSCHELL SPECIALISED LUBRICANTS Flip to back page
Description Page
Index
Madein
RSA
CF C O 'SN
O
YZ LO DN NE E I FR
EDGE PRECISION CUTTING TOOLS
P. O. Box 23, Germiston 1400
Reg. No: 1968/007/521/01
Tel: 011-827-5935
Fax: 011-824-2125
Email: [email protected]
High Speed Steel Straight Shanks
MILLED & POLISHED DRILLS
1
*3 -191 0100C/2 1.0mm 3 -191 0100
*3 -191 0120C/2 1.2mm 3 -191 0120
*3 -191 0150C/2 1.5mm 3 -191 0150
*3 -191 0180C/2 1.8mm 3 -191 0180
*3 -191 0200C/2 2.0mm 3 -191 0200
*3 -191 0220C/2 2.2mm 3 -191 0220
*3 -191 0230C/2 2.3mm 3 -191 0230
*3 -191 0250C/2 2.5mm 3 -191 0250
*3 -191 0280C/2 2.8mm 3 -191 0280
*3 -191 0300C/2 3.0mm 3 -191 0300
3 - 191 0310C 3.1mm 3 -191 0310
3 - 191 0320C 3.2mm 3 -191 0320
3 -191 0330C 3.3mm 3 -191 0330
3 -191 0350C 3.5mm 3 -191 0350
3 -191 0380C 3.8mm 3 -191 0380
*
E and OE
PLEASE NOTE: Denotes 2 drills per card
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
2
3 - 191 0400C 4.0mm 3 - 191 0400
3 - 191 0410C 4.1mm 3 - 191 0410
3 - 191 0420C 4.2mm 3 - 191 0420
3 - 191 0430C 4.3mm 3 - 191 0430
3 - 191 0450C 4.5mm 3 - 191 0450
3 - 191 0480C 4.8mm 3 - 191 0480
3 - 191 0490C 4.9mm 3 - 191 0490
3 - 191 0500C 5.0mm 3 - 191 0500
3 - 191 0520C 5.2mm 3 - 191 0520
3 - 191 0550C 5.5mm 3 - 191 0550
3 - 191 0570C 5.7mm 3 - 191 0570
3 - 191 0580C 5.8mm 3 - 191 0580
3 - 191 0600C 6.0mm 3 - 191 0600
3 - 191 0620C 6.2mm 3 - 191 0620
3 - 191 0650C 6.5mm 3 - 191 0650
3 - 191 0700C 7.0mm 3 - 191 0700
3 - 191 0750C 7.5mm 3 - 191 0750
3 - 191 0800C 8.0mm 3 - 191 0800
3 - 191 0850C 8.5mm 3 - 191 0850
3 - 191 0900C 9.0mm 3 - 191 0900
3 - 191 0950C 9.5mm 3 - 191 0950
3 - 191 1000C 10.0mm 3 - 191 1000
3 - 191 1050C 10.5mm 3 - 191 1050
3 - 191 1100C 11.0mm 3 - 191 1100
3 - 191 1150C 11.5mm 3 - 191 1150
3 - 191 1200C 12.0mm 3 - 191 1200
3 - 191 1250C 12.5mm 3 - 191 1250
3 - 191 1300C 13.0mm 3 - 191 1300
E and OE
High Speed Steel Straight Shanks
MILLED & POLISHED DRILLS
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
High Speed Steel Straight Shanks
MILLED & POLISHED DRILLS
1
*3 -191 0100C/2 1.0mm 3 -191 0100
*3 -191 0120C/2 1.2mm 3 -191 0120
*3 -191 0150C/2 1.5mm 3 -191 0150
*3 -191 0180C/2 1.8mm 3 -191 0180
*3 -191 0200C/2 2.0mm 3 -191 0200
*3 -191 0220C/2 2.2mm 3 -191 0220
*3 -191 0230C/2 2.3mm 3 -191 0230
*3 -191 0250C/2 2.5mm 3 -191 0250
*3 -191 0280C/2 2.8mm 3 -191 0280
*3 -191 0300C/2 3.0mm 3 -191 0300
3 - 191 0310C 3.1mm 3 -191 0310
3 - 191 0320C 3.2mm 3 -191 0320
3 -191 0330C 3.3mm 3 -191 0330
3 -191 0350C 3.5mm 3 -191 0350
3 -191 0380C 3.8mm 3 -191 0380
*
E and OE
PLEASE NOTE: Denotes 2 drills per card
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
2
3 - 191 0400C 4.0mm 3 - 191 0400
3 - 191 0410C 4.1mm 3 - 191 0410
3 - 191 0420C 4.2mm 3 - 191 0420
3 - 191 0430C 4.3mm 3 - 191 0430
3 - 191 0450C 4.5mm 3 - 191 0450
3 - 191 0480C 4.8mm 3 - 191 0480
3 - 191 0490C 4.9mm 3 - 191 0490
3 - 191 0500C 5.0mm 3 - 191 0500
3 - 191 0520C 5.2mm 3 - 191 0520
3 - 191 0550C 5.5mm 3 - 191 0550
3 - 191 0570C 5.7mm 3 - 191 0570
3 - 191 0580C 5.8mm 3 - 191 0580
3 - 191 0600C 6.0mm 3 - 191 0600
3 - 191 0620C 6.2mm 3 - 191 0620
3 - 191 0650C 6.5mm 3 - 191 0650
3 - 191 0700C 7.0mm 3 - 191 0700
3 - 191 0750C 7.5mm 3 - 191 0750
3 - 191 0800C 8.0mm 3 - 191 0800
3 - 191 0850C 8.5mm 3 - 191 0850
3 - 191 0900C 9.0mm 3 - 191 0900
3 - 191 0950C 9.5mm 3 - 191 0950
3 - 191 1000C 10.0mm 3 - 191 1000
3 - 191 1050C 10.5mm 3 - 191 1050
3 - 191 1100C 11.0mm 3 - 191 1100
3 - 191 1150C 11.5mm 3 - 191 1150
3 - 191 1200C 12.0mm 3 - 191 1200
3 - 191 1250C 12.5mm 3 - 191 1250
3 - 191 1300C 13.0mm 3 - 191 1300
E and OE
High Speed Steel Straight Shanks
MILLED & POLISHED DRILLS
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
0
High Speed Steel Reduced Shanks
MILLED & POLISHED DRILLS
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
3
3 - 275 1400C 14.0mm X 10 3 - 275 1400
3 - 275 1450C 14.5mm X 10 3 - 275 1450
3 - 275 1500C 15.0mm X 10 3 - 275 1500
3 - 275 1550C 15.5mm X 10 3 - 275 1550
3 - 275 1600C 16.0mm X 12.7 3 - 275 1600
3 - 275 1650C 16.5mm X 12.7 3 - 275 1650
3 - 275 1700C 17.0mm X 12.7 3 - 275 1700
3 - 275 1750C 17.5mm X 12.7 3 - 275 1750
3 - 275 1800C 18.0mm X 12.7 3 - 275 1800
3 - 275 1850C 18.5mm X 12.7 3 - 275 1850
3 - 275 1900C 19.0mm X 12.7 3 - 275 1900
3 - 275 1950C 19.5mm X 12.7 3 - 275 1950
3 - 275 2000C 20.0mm X 12.7 3 - 275 2000
3 - 275 2050C 20.5mm X 12.7 3 - 275 2050
3 - 275 2100C 21.0mm X 12.7 3 - 275 2100
3 - 275 2200C 22.0mm X 12.7 3 - 275 2200
3 - 275 2300C 23.0mm X 12.7 3 - 275 2300
3 - 275 2400C 24.0mm X 12.7 3 - 275 2400
3 - 275 2450C 24.5mm X 12.7 3 - 275 2450
3 - 275 2500C 25.0mm X 12.7 3 - 275 2500
E and OE
04
BLACK / BRONZE INDUSTRIALPrecision Ground Straight Shank
PRODUCTCODE
PRODUCTCODE
CARDED SIZE BULK
0.20mm 3 - 111 0020
0.30mm 3 - 111 0030
0.40mm 3 - 111 0040
0.50mm 3 - 111 0050
0.60mm 3 - 111 0060
0.70mm 3 - 111 0070
0.80mm 3 - 111 0080
0.90mm 3 - 111 0090
*3 - 111 0100C/2 1.00mm 3 - 111 0100
1.10mm 3 - 111 0110
1.20mm 3 - 111 0120
1.30mm 3 - 111 0130
1.40mm 3 - 111 0140
*3 - 111 0150C/2 1.50mm 3 - 111 0150
1.60mm 3 - 111 0160
1.70mm 3 - 111 0170
1.80mm 3 - 111 0180
1.90mm 3 - 111 0190
*3 - 111 0200C/2 2.00mm 3 - 111 0200
2.10mm 3 - 111 0210
2.20mm 3 - 111 0220
2.30mm 3 - 111 0230
2.40mm 3 - 111 0240
*3 - 111 0250C/2 2.50mm 3 - 111 0250
2.60mm 3 - 111 0260
2.70mm 3 - 111 0270
2.80mm 3 - 111 0280
2.90mm 3 - 111 0290
*
E and OE
PLEASE NOTE: Denotes 2 drills per card
0
High Speed Steel Reduced Shanks
MILLED & POLISHED DRILLS
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
3
3 - 275 1400C 14.0mm X 10 3 - 275 1400
3 - 275 1450C 14.5mm X 10 3 - 275 1450
3 - 275 1500C 15.0mm X 10 3 - 275 1500
3 - 275 1550C 15.5mm X 10 3 - 275 1550
3 - 275 1600C 16.0mm X 12.7 3 - 275 1600
3 - 275 1650C 16.5mm X 12.7 3 - 275 1650
3 - 275 1700C 17.0mm X 12.7 3 - 275 1700
3 - 275 1750C 17.5mm X 12.7 3 - 275 1750
3 - 275 1800C 18.0mm X 12.7 3 - 275 1800
3 - 275 1850C 18.5mm X 12.7 3 - 275 1850
3 - 275 1900C 19.0mm X 12.7 3 - 275 1900
3 - 275 1950C 19.5mm X 12.7 3 - 275 1950
3 - 275 2000C 20.0mm X 12.7 3 - 275 2000
3 - 275 2050C 20.5mm X 12.7 3 - 275 2050
3 - 275 2100C 21.0mm X 12.7 3 - 275 2100
3 - 275 2200C 22.0mm X 12.7 3 - 275 2200
3 - 275 2300C 23.0mm X 12.7 3 - 275 2300
3 - 275 2400C 24.0mm X 12.7 3 - 275 2400
3 - 275 2450C 24.5mm X 12.7 3 - 275 2450
3 - 275 2500C 25.0mm X 12.7 3 - 275 2500
E and OE
04
BLACK / BRONZE INDUSTRIALPrecision Ground Straight Shank
PRODUCTCODE
PRODUCTCODE
CARDED SIZE BULK
0.20mm 3 - 111 0020
0.30mm 3 - 111 0030
0.40mm 3 - 111 0040
0.50mm 3 - 111 0050
0.60mm 3 - 111 0060
0.70mm 3 - 111 0070
0.80mm 3 - 111 0080
0.90mm 3 - 111 0090
*3 - 111 0100C/2 1.00mm 3 - 111 0100
1.10mm 3 - 111 0110
1.20mm 3 - 111 0120
1.30mm 3 - 111 0130
1.40mm 3 - 111 0140
*3 - 111 0150C/2 1.50mm 3 - 111 0150
1.60mm 3 - 111 0160
1.70mm 3 - 111 0170
1.80mm 3 - 111 0180
1.90mm 3 - 111 0190
*3 - 111 0200C/2 2.00mm 3 - 111 0200
2.10mm 3 - 111 0210
2.20mm 3 - 111 0220
2.30mm 3 - 111 0230
2.40mm 3 - 111 0240
*3 - 111 0250C/2 2.50mm 3 - 111 0250
2.60mm 3 - 111 0260
2.70mm 3 - 111 0270
2.80mm 3 - 111 0280
2.90mm 3 - 111 0290
*
E and OE
PLEASE NOTE: Denotes 2 drills per card
05
BLACK / BRONZE INDUSTRIAL
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
Precision Ground Straight Shank
*3 - 111 0300C/2 3.00mm 3 - 111 0300
3 - 111 0310C 3.10mm 3 - 111 0310
3 - 111 0320C 3.20mm 3 - 111 0320
3 - 111 0330C 3.30mm 3 - 111 0330
3 - 111 0340C 3.40mm 3 - 111 0340
3 - 111 0350C 3.50mm 3 - 111 0350
3 - 111 0360C 3.60mm 3 - 111 0360
3 - 111 0370C 3.70mm 3 - 111 0370
3 - 111 0380C 3.80mm 3 - 111 0380
3 - 111 0390C 3.90mm 3 - 111 0390
3 - 111 0400C 4.00mm 3 - 111 0400
3 - 111 0410C 4.10mm 3 - 111 0410
3 - 111 0420C 4.20mm 3 - 111 0420
3 - 111 0430C 4.30mm 3 - 111 0430
3 - 111 0440C 4.40mm 3 - 111 0440
3 - 111 0450C 4.50mm 3 - 111 0450
3 - 111 0460C 4.60mm 3 - 111 0460
3 - 111 0470C 4.70mm 3 - 111 0470
3 - 111 0480C 4.80mm 3 - 111 0480
3 - 111 0490C 4.90mm 3 - 111 0490
3 - 111 0500C 5.00mm 3 - 111 0500
3 - 111 0510C 5.10mm 3 - 111 0510
3 - 111 0520C 5.20mm 3 - 111 0520
3 - 111 0530C 5.30mm 3 - 111 0530
3 - 111 0540C 5.40mm 3 - 111 0540
3 - 111 0550C 5.50mm 3 - 111 0550
3 - 111 0560C 5.60mm 3 - 111 0560
3 - 111 0570C 5.70mm 3 - 111 0570
3 - 111 0580C 5.80mm 3 - 111 0580
3 - 111 0590C 5.90mm 3 - 111 0590
*
E and OE
PLEASE NOTE: Denotes 2 drills per card
06
PRODUCTCODE
PRODUCTCODE
3 - 111 0600C 6.00mm 3 - 111 0600
3 - 111 0610C 6.10mm 3 - 111 0610
3 - 111 0620C 6.20mm 3 - 111 0620
3 - 111 0630C 6.30mm 3 - 111 0630
3 - 111 0640C 6.40mm 3 - 111 0640
3 - 111 0650C 6.50mm 3 - 111 0650
3 - 111 0660C 6.60mm 3 - 111 0660
3 - 111 0670C 6.70mm 3 - 111 0670
3 - 111 0680C 6.80mm 3 - 111 0680
3 - 111 0690C 6.90mm 3 - 111 0690
3 - 111 0700C 7.00mm 3 - 111 0700
3 - 111 0710C 7.10mm 3 - 111 0710
3 - 111 0720C 7.20mm 3 - 111 0720
3 - 111 0730C 7.30mm 3 - 111 0730
3 - 111 0740C 7.40mm 3 - 111 0740
3 - 111 0750C 7.50mm 3 - 111 0750
3 - 111 0760C 7.60mm 3 - 111 0760
3 - 111 0770C 7.70mm 3 - 111 0770
3 - 111 0780C 7.80mm 3 - 111 0780
3 - 111 0790C 7.90mm 3 - 111 0790
3 - 111 0800C 8.00mm 3 - 111 0800
3 - 111 0810C 8.10mm 3 - 111 0810
3 - 111 0820C 8.20mm 3 - 111 0820
3 - 111 0830C 8.30mm 3 - 111 0830
3 - 111 0840C 8.40mm 3 - 111 0840
3 - 111 0850C 8.50mm 3 - 111 0850
3 - 111 0860C 8.60mm 3 - 111 0860
3 - 111 0870C 8.70mm 3 - 111 0870
3 - 111 0880C 8.80mm 3 - 111 0880
3 - 111 0890C 8.90mm 3 - 111 0890
E and OE
BLACK / BRONZE INDUSTRIALPrecision Ground Straight Shank
CARDED SIZE BULK
05
BLACK / BRONZE INDUSTRIAL
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
Precision Ground Straight Shank
*3 - 111 0300C/2 3.00mm 3 - 111 0300
3 - 111 0310C 3.10mm 3 - 111 0310
3 - 111 0320C 3.20mm 3 - 111 0320
3 - 111 0330C 3.30mm 3 - 111 0330
3 - 111 0340C 3.40mm 3 - 111 0340
3 - 111 0350C 3.50mm 3 - 111 0350
3 - 111 0360C 3.60mm 3 - 111 0360
3 - 111 0370C 3.70mm 3 - 111 0370
3 - 111 0380C 3.80mm 3 - 111 0380
3 - 111 0390C 3.90mm 3 - 111 0390
3 - 111 0400C 4.00mm 3 - 111 0400
3 - 111 0410C 4.10mm 3 - 111 0410
3 - 111 0420C 4.20mm 3 - 111 0420
3 - 111 0430C 4.30mm 3 - 111 0430
3 - 111 0440C 4.40mm 3 - 111 0440
3 - 111 0450C 4.50mm 3 - 111 0450
3 - 111 0460C 4.60mm 3 - 111 0460
3 - 111 0470C 4.70mm 3 - 111 0470
3 - 111 0480C 4.80mm 3 - 111 0480
3 - 111 0490C 4.90mm 3 - 111 0490
3 - 111 0500C 5.00mm 3 - 111 0500
3 - 111 0510C 5.10mm 3 - 111 0510
3 - 111 0520C 5.20mm 3 - 111 0520
3 - 111 0530C 5.30mm 3 - 111 0530
3 - 111 0540C 5.40mm 3 - 111 0540
3 - 111 0550C 5.50mm 3 - 111 0550
3 - 111 0560C 5.60mm 3 - 111 0560
3 - 111 0570C 5.70mm 3 - 111 0570
3 - 111 0580C 5.80mm 3 - 111 0580
3 - 111 0590C 5.90mm 3 - 111 0590
*
E and OE
PLEASE NOTE: Denotes 2 drills per card
06
PRODUCTCODE
PRODUCTCODE
3 - 111 0600C 6.00mm 3 - 111 0600
3 - 111 0610C 6.10mm 3 - 111 0610
3 - 111 0620C 6.20mm 3 - 111 0620
3 - 111 0630C 6.30mm 3 - 111 0630
3 - 111 0640C 6.40mm 3 - 111 0640
3 - 111 0650C 6.50mm 3 - 111 0650
3 - 111 0660C 6.60mm 3 - 111 0660
3 - 111 0670C 6.70mm 3 - 111 0670
3 - 111 0680C 6.80mm 3 - 111 0680
3 - 111 0690C 6.90mm 3 - 111 0690
3 - 111 0700C 7.00mm 3 - 111 0700
3 - 111 0710C 7.10mm 3 - 111 0710
3 - 111 0720C 7.20mm 3 - 111 0720
3 - 111 0730C 7.30mm 3 - 111 0730
3 - 111 0740C 7.40mm 3 - 111 0740
3 - 111 0750C 7.50mm 3 - 111 0750
3 - 111 0760C 7.60mm 3 - 111 0760
3 - 111 0770C 7.70mm 3 - 111 0770
3 - 111 0780C 7.80mm 3 - 111 0780
3 - 111 0790C 7.90mm 3 - 111 0790
3 - 111 0800C 8.00mm 3 - 111 0800
3 - 111 0810C 8.10mm 3 - 111 0810
3 - 111 0820C 8.20mm 3 - 111 0820
3 - 111 0830C 8.30mm 3 - 111 0830
3 - 111 0840C 8.40mm 3 - 111 0840
3 - 111 0850C 8.50mm 3 - 111 0850
3 - 111 0860C 8.60mm 3 - 111 0860
3 - 111 0870C 8.70mm 3 - 111 0870
3 - 111 0880C 8.80mm 3 - 111 0880
3 - 111 0890C 8.90mm 3 - 111 0890
E and OE
BLACK / BRONZE INDUSTRIALPrecision Ground Straight Shank
CARDED SIZE BULK
07
BLACK / BRONZE INDUSTRIALPrecision Ground Straight Shank
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
3 - 111 0900C 9.00mm 3 - 111 0900
3 - 111 0910C 9.10mm 3 - 111 0910
3 - 111 0920C 9.20mm 3 - 111 0920
3 - 111 0930C 9.30mm 3 - 111 0930
3 - 111 0940C 9.40mm 3 - 111 0940
3 - 111 0950C 9.50mm 3 - 111 0950
3 - 111 0960C 9.60mm 3 - 111 0960
3 - 111 0970C 9.70mm 3 - 111 0970
3 - 111 0980C 9.80mm 3 - 111 0980
3 - 111 0990c 9.90mm 3 - 111 0990
3 - 111 1000C 10.00mm 3 - 111 1000
3 - 111 1010C 10.10mm 3 - 111 1010
3 - 111 1020C 10.20mm 3 - 111 1020
3 - 111 1030C 10.30mm 3 - 111 1030
3 - 111 1040C 10.40mm 3 - 111 1040
3 - 111 1050C 10.50mm 3 - 111 1050
3 - 111 1060C 10.60mm 3 - 111 1060
3 - 111 1070C 10.70mm 3 - 111 1070
3 - 111 1080C 10.80mm 3 - 111 1080
3 - 111 1090C 10.90mm 3 - 111 1090
3 - 111 1100C 11.00mm 3 - 111 1100
3 - 111 1110C 11.10mm 3 - 111 1110
3 - 111 1120C 11.20mm 3 - 111 1120
3 - 111 1130C 11.30mm 3 - 111 1130
3 - 111 1140C 11.40mm 3 - 111 1140
3 - 111 1150C 11.50mm 3 - 111 1150
3 - 111 1160C 11.60mm 3 - 111 1160
3 - 111 1170C 11.70mm 3 - 111 1170
3 - 111 1180C 11.80mm 3 - 111 1180
3 - 111 1190C 11.90mm 3 - 111 1190
E and OE
08
BLACK / BRONZE INDUSTRIAL
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
3 - 111 1200C 12.00mm 3 - 111 1200
3 - 111 1210C 12.10mm 3 - 111 1210
3 - 111 1220C 12.20mm 3 - 111 1220
3 - 111 1230C 12.30mm 3 - 111 1230
3 - 111 1240C 12.40mm 3 - 111 1240
3 - 111 1250C 12.50mm 3 - 111 1250
3 - 111 1260C 12.60mm 3 - 111 1260
3 - 111 1270C 12.70mm 3 - 111 1270
3 - 111 1280C 12.80mm 3 - 111 1280
3 - 111 1290C 12.90mm 3 - 111 1290
3 - 1111 300C 13.00mm 3 - 111 1300
3 - 111 1350C 13.50mm 3 - 111 1350
3 - 111 1400C 14.00mm 3 - 111 1400
3 - 111 1450C 14.60mm 3 - 111 1450
3 - 111 1500C 15.00mm 3 - 111 1500
3 - 111 1600C 16.00mm 3 - 111 1600
3 - 111 1700C 17.00mm 3 - 111 1700
3 - 111 1800C 18.00mm 3 - 111 1800
3 - 111 1900C 19.00mm 3 - 111 1900
3 - 111 2000C 20.00mm 3 - 111 2000
E and OE
Precision Ground Straight Shank
07
BLACK / BRONZE INDUSTRIALPrecision Ground Straight Shank
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
3 - 111 0900C 9.00mm 3 - 111 0900
3 - 111 0910C 9.10mm 3 - 111 0910
3 - 111 0920C 9.20mm 3 - 111 0920
3 - 111 0930C 9.30mm 3 - 111 0930
3 - 111 0940C 9.40mm 3 - 111 0940
3 - 111 0950C 9.50mm 3 - 111 0950
3 - 111 0960C 9.60mm 3 - 111 0960
3 - 111 0970C 9.70mm 3 - 111 0970
3 - 111 0980C 9.80mm 3 - 111 0980
3 - 111 0990c 9.90mm 3 - 111 0990
3 - 111 1000C 10.00mm 3 - 111 1000
3 - 111 1010C 10.10mm 3 - 111 1010
3 - 111 1020C 10.20mm 3 - 111 1020
3 - 111 1030C 10.30mm 3 - 111 1030
3 - 111 1040C 10.40mm 3 - 111 1040
3 - 111 1050C 10.50mm 3 - 111 1050
3 - 111 1060C 10.60mm 3 - 111 1060
3 - 111 1070C 10.70mm 3 - 111 1070
3 - 111 1080C 10.80mm 3 - 111 1080
3 - 111 1090C 10.90mm 3 - 111 1090
3 - 111 1100C 11.00mm 3 - 111 1100
3 - 111 1110C 11.10mm 3 - 111 1110
3 - 111 1120C 11.20mm 3 - 111 1120
3 - 111 1130C 11.30mm 3 - 111 1130
3 - 111 1140C 11.40mm 3 - 111 1140
3 - 111 1150C 11.50mm 3 - 111 1150
3 - 111 1160C 11.60mm 3 - 111 1160
3 - 111 1170C 11.70mm 3 - 111 1170
3 - 111 1180C 11.80mm 3 - 111 1180
3 - 111 1190C 11.90mm 3 - 111 1190
E and OE
08
BLACK / BRONZE INDUSTRIAL
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
3 - 111 1200C 12.00mm 3 - 111 1200
3 - 111 1210C 12.10mm 3 - 111 1210
3 - 111 1220C 12.20mm 3 - 111 1220
3 - 111 1230C 12.30mm 3 - 111 1230
3 - 111 1240C 12.40mm 3 - 111 1240
3 - 111 1250C 12.50mm 3 - 111 1250
3 - 111 1260C 12.60mm 3 - 111 1260
3 - 111 1270C 12.70mm 3 - 111 1270
3 - 111 1280C 12.80mm 3 - 111 1280
3 - 111 1290C 12.90mm 3 - 111 1290
3 - 1111 300C 13.00mm 3 - 111 1300
3 - 111 1350C 13.50mm 3 - 111 1350
3 - 111 1400C 14.00mm 3 - 111 1400
3 - 111 1450C 14.60mm 3 - 111 1450
3 - 111 1500C 15.00mm 3 - 111 1500
3 - 111 1600C 16.00mm 3 - 111 1600
3 - 111 1700C 17.00mm 3 - 111 1700
3 - 111 1800C 18.00mm 3 - 111 1800
3 - 111 1900C 19.00mm 3 - 111 1900
3 - 111 2000C 20.00mm 3 - 111 2000
E and OE
Precision Ground Straight Shank
9
MORSE TAPER SHANK DRILLSHigh Speed Steel / Precision Ground
PRODUCTCODE
SIZE
13 - 291 0600 6.00mm
13 - 291 0650 6.50mm
13 - 291 0700 7.00mm
13 - 291 0750 7.50mm
13 - 291 0800 8.00mm
13 - 291 0850 8.50mm
13 - 291 0900 9.00mm
13 - 291 0950 9.50mm
13 - 291 1000 10.00mm
13 - 291 1050 10.50mm
13 - 291 1100 11.00mm
13 - 291 1150 11.50mm
13 - 291 1200 12.00mm
13 - 291 1250 12.50mm
13 - 291 1300 13.00mm
13 - 291 1350 13.50mm
13 - 291 1400 14.00mm X 1 MT
13 - 292 1400 14.00mm X 2 MT
13 - 292 1450 14.50mm
13 - 292 1500 15.00mm
13 - 292 1550 15.50mm
13 - 292 1600 16.00mm
13 - 292 1650 16.50mm
13 - 292 1700 17.00mm
13 - 292 1750 17.50mm
13 - 292 1800 18.00mm
13 - 292 1850 18.50mm
13 - 292 1900 19.00mm
13 - 292 1950 19.50mm
13 - 292 2000 20.00mm
13 - 292 2050 20.50mm
E and OE
MORSE TAPER SHANK DRILLSHigh Speed Steel / Precision Ground
10
PRODUCTCODE
SIZE
13 - 292 2100 21.00mm
13 - 292 2150 21.50mm
13 - 292 2200 22.00mm
13 - 292 2250 22.50mm
13 - 292 2300 23.00mm
13 - 293 2350 23.50mm
13 - 293 2400 24.00mm
13 - 293 2450 24.50mm
13 - 293 2500 25.00mm
13 - 293 2550 25.50mm
13 - 293 2600 26.00mm
13 - 293 2650 26.50mm
13 - 293 2700 27.00mm
13 - 293 2750 27.50mm
13 - 293 2800 28.00mm
13 - 293 2850 28.50mm
13 - 293 2900 29.00mm
13 - 293 2950 29.50mm
13 - 293 3000 30.00mm
13 - 293 3100 31.00mm
13 - 293 3200 32.00mm X 3 MT
13 - 294 3200 32.00mm X 4 MT
13 - 294 3300 33.00mm
13 - 294 3400 34.00mm
13 - 294 3500 35.00mm
13 - 294 3600 36.00mm
13 - 294 3700 37.00mm
13 - 294 3800 38.00mm
13 - 294 3900 39.00mm
13 - 294 4000 40.00mm
13 - 294 4100 41.00mm
E and OE
9
MORSE TAPER SHANK DRILLSHigh Speed Steel / Precision Ground
PRODUCTCODE
SIZE
13 - 291 0600 6.00mm
13 - 291 0650 6.50mm
13 - 291 0700 7.00mm
13 - 291 0750 7.50mm
13 - 291 0800 8.00mm
13 - 291 0850 8.50mm
13 - 291 0900 9.00mm
13 - 291 0950 9.50mm
13 - 291 1000 10.00mm
13 - 291 1050 10.50mm
13 - 291 1100 11.00mm
13 - 291 1150 11.50mm
13 - 291 1200 12.00mm
13 - 291 1250 12.50mm
13 - 291 1300 13.00mm
13 - 291 1350 13.50mm
13 - 291 1400 14.00mm X 1 MT
13 - 292 1400 14.00mm X 2 MT
13 - 292 1450 14.50mm
13 - 292 1500 15.00mm
13 - 292 1550 15.50mm
13 - 292 1600 16.00mm
13 - 292 1650 16.50mm
13 - 292 1700 17.00mm
13 - 292 1750 17.50mm
13 - 292 1800 18.00mm
13 - 292 1850 18.50mm
13 - 292 1900 19.00mm
13 - 292 1950 19.50mm
13 - 292 2000 20.00mm
13 - 292 2050 20.50mm
E and OE
MORSE TAPER SHANK DRILLSHigh Speed Steel / Precision Ground
10
PRODUCTCODE
SIZE
13 - 292 2100 21.00mm
13 - 292 2150 21.50mm
13 - 292 2200 22.00mm
13 - 292 2250 22.50mm
13 - 292 2300 23.00mm
13 - 293 2350 23.50mm
13 - 293 2400 24.00mm
13 - 293 2450 24.50mm
13 - 293 2500 25.00mm
13 - 293 2550 25.50mm
13 - 293 2600 26.00mm
13 - 293 2650 26.50mm
13 - 293 2700 27.00mm
13 - 293 2750 27.50mm
13 - 293 2800 28.00mm
13 - 293 2850 28.50mm
13 - 293 2900 29.00mm
13 - 293 2950 29.50mm
13 - 293 3000 30.00mm
13 - 293 3100 31.00mm
13 - 293 3200 32.00mm X 3 MT
13 - 294 3200 32.00mm X 4 MT
13 - 294 3300 33.00mm
13 - 294 3400 34.00mm
13 - 294 3500 35.00mm
13 - 294 3600 36.00mm
13 - 294 3700 37.00mm
13 - 294 3800 38.00mm
13 - 294 3900 39.00mm
13 - 294 4000 40.00mm
13 - 294 4100 41.00mm
E and OE
07
MORSE TAPER SHANK DRILLS
11
High Speed Steel / Precision Ground
PRODUCTCODE
SIZE
13 - 294 4200 42.00mm
13 - 294 4300 43.00mm
13 - 294 4400 44.00mm
13 - 294 4500 45.00mm
13 - 294 4600 46.00mm
13 - 294 4700 47.00mm
13 - 294 4800 48.00mm
13 - 294 4900 49.00mm
13 - 294 5000 50.00mm
13 - 295 5100 51.00mm
13 - 295 5200 52.00mm
13 - 295 5300 53.00mm
13 - 295 5400 54.00mm
13 - 295 5500 55.00mm
13 - 295 5600 56.00mm
13 - 295 5700 57.00mm
13 - 295 5800 58.00mm
13 - 295 5900 59.00mm
13 - 295 6000 60.00mm
E and OE
Formula to calculate correct drilling speed
rpm =(m/min) x 1000
3,14( ) x drill diameter
012
MORSE TAPER SLEEVESOil Toughened
PRODUCTCODE
SIZE
PRODUCTCODE
SIZE
13 - 281 0020 1 - 2
13 - 281 0030 1 - 3
13 - 281 0040 2 - 3
13 - 281 0050 2 - 4
13 - 281 0060 3 - 4
13 - 281 0065 2 - 5
13 - 281 0070 4 - 5
13 - 281 0080 5 - 6
E and OE
13 - 507 0400 M4 x 7
13 - 507 0500 M5 x 8
13 - 507 0600 M6 x 1.0
13 - 507 0800 M8 x 1.25
13 - 507 1000 M10 x 1.50
13 - 507 1200 M12 x 1.75
13 - 507 1400 M14 x 2.0
13 - 507 1600 M16 x 2.0
13 - 507 1800 M18 x 2.5
13 - 507 2000 M20 x 2.5
13 - 507 2200 M22 x 2.5
13 - 507 2400 M24 x 3.0
13 - 507 2700 M27 x 3.0
13 - 507 3000 M30 x 3.5
E and OE
HSS Die-Nuts
07
MORSE TAPER SHANK DRILLS
11
High Speed Steel / Precision Ground
PRODUCTCODE
SIZE
13 - 294 4200 42.00mm
13 - 294 4300 43.00mm
13 - 294 4400 44.00mm
13 - 294 4500 45.00mm
13 - 294 4600 46.00mm
13 - 294 4700 47.00mm
13 - 294 4800 48.00mm
13 - 294 4900 49.00mm
13 - 294 5000 50.00mm
13 - 295 5100 51.00mm
13 - 295 5200 52.00mm
13 - 295 5300 53.00mm
13 - 295 5400 54.00mm
13 - 295 5500 55.00mm
13 - 295 5600 56.00mm
13 - 295 5700 57.00mm
13 - 295 5800 58.00mm
13 - 295 5900 59.00mm
13 - 295 6000 60.00mm
E and OE
Formula to calculate correct drilling speed
rpm =(m/min) x 1000
3,14( ) x drill diameter
012
MORSE TAPER SLEEVESOil Toughened
PRODUCTCODE
SIZE
PRODUCTCODE
SIZE
13 - 281 0020 1 - 2
13 - 281 0030 1 - 3
13 - 281 0040 2 - 3
13 - 281 0050 2 - 4
13 - 281 0060 3 - 4
13 - 281 0065 2 - 5
13 - 281 0070 4 - 5
13 - 281 0080 5 - 6
E and OE
13 - 507 0400 M4 x 7
13 - 507 0500 M5 x 8
13 - 507 0600 M6 x 1.0
13 - 507 0800 M8 x 1.25
13 - 507 1000 M10 x 1.50
13 - 507 1200 M12 x 1.75
13 - 507 1400 M14 x 2.0
13 - 507 1600 M16 x 2.0
13 - 507 1800 M18 x 2.5
13 - 507 2000 M20 x 2.5
13 - 507 2200 M22 x 2.5
13 - 507 2400 M24 x 3.0
13 - 507 2700 M27 x 3.0
13 - 507 3000 M30 x 3.5
E and OE
HSS Die-Nuts
013
EDGE EXTREME INDUSTRIALPrecision Ground Tri-Shank
*3 - 190 0100C/2 1.00mm *3 - 190 0100C/2
*3 - 190 0150C/2 1.50mm *3 - 190 0150C/2
*3 - 190 0180C/2 1.80mm *3 - 190 0180C/2
*3 - 190 0200/C2 2.00mm *3 - 190 0200/C2
*3 - 190 0250/C2 2.50mm *3 - 190 0250/C2
*3 - 190 0280/C2 2.80mm *3 - 190 0280/C2
*3 - 190 0300C/2 3.00mm *3 - 190 0300C/2
3 - 190 0320C 3.20mm 3 - 190 0320C
3 - 190 0330C 3.30mm 3 - 190 0330C
3 - 190 0350C 3.50mm 3 - 190 0350C
3 - 190 0380C 3.80mm 3 - 190 0380C
3 - 190 0400C 4.00mm 3 - 190 0400C
3 - 190 0420C 4.20mm 3 - 190 0420C
3 - 190 0450C 4.50mm 3 - 190 0450C
3 - 190 0480C 4.80mm 3 - 190 0480C
3 - 190 0500C 5.00mm 3 - 190 0500C
3 - 190 0520C 5.20mm 3 - 190 0520C
3 - 190 0550C 5.50mm 3 - 190 0550C
3 - 190 0600C 6.00mm 3 - 190 0600C
3 - 190 0650C 6.50mm 3 - 190 0650C
3 - 190 0700C 7.00mm 3 - 190 0700C
3 - 190 0750C 7.50mm 3 - 190 0750C
3 - 190 0800C 8.00mm 3 - 190 0800C
3 - 190 0850C 8.50mm 3 - 190 0850C
3 - 190 0900C 9.00mm 3 - 190 0900C
3 - 190 0950C 9.50mm 3 - 190 0950C
3 - 190 1000C 10.0mm 3 - 190 1000C
3 - 190 1050C 10.5mm 3 - 190 1050C
3 - 190 1100C 11.0mm 3 - 190 1100C
3 - 190 1150C 11.5mm 3 - 190 1150C
3 - 190 1200C 12.0mm 3 - 190 1200C
3 - 190 1250C 12.5mm 3 - 190 1250C
3 - 190 1300C 13.0mm 3 - 190 1300C
PLEASE NOTE: Denotes 2 drills per card*
E and OE
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
014
DRILL BITS
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
Double Ended Stubs
* 3 - 153 0280C/2 2.8mm 3 - 153 0280
* 3 - 153 0300C/2 3.0mm 3 - 153 0300
* 3 - 153 0320C/2 3.2mm 3 - 153 0320
* 3 - 153 0330C/2 3.3mm 3 - 153 0330
* 3 - 153 0350C/2 3.5mm 3 - 153 0350
* 3 - 153 0380C/2 3.8mm 3 - 153 0380
* 3 - 153 0400C/2 4.0mm 3 - 153 0400
* 3 - 153 0410C/2 4.1mm 3 - 153 0410
* 3 - 153 0420C/2 4.2mm 3 - 153 0420
* 3 - 153 0450C/2 4.5mm 3 - 153 0450
* 3 - 153 0480C/2 4.8mm 3 - 153 0480
* 3 - 153 0490C/2 4.9mm 3 - 153 0490
* 3 - 153 0500C/2 5.0mm 3 - 153 0500
* 3 - 153 0520C/2 5.2mm 3 - 153 0520
3 - 153 0550C 5.5mm 3 - 153 0550
3 - 153 0600C 6.0mm 3 - 153 0600
*
E and OE
PLEASE NOTE: Denotes 2 drills per card
1. The term "HSS" is an acronym for High Speed Steel, the
material of choice when high heat / temperature and speed are
criteria.
2. The point grinding of an HSS drill bit determines what material
type the bit can tackle or penetrate.
3. The point grinding of EDGE industrial and Extreme industrial
drill bits have been proved to reduce "end thrust" by 60 - 70%.
This is the force required to penetrate.
4. Use speed formula shown on page 11.
013
EDGE EXTREME INDUSTRIALPrecision Ground Tri-Shank
*3 - 190 0100C/2 1.00mm *3 - 190 0100C/2
*3 - 190 0150C/2 1.50mm *3 - 190 0150C/2
*3 - 190 0180C/2 1.80mm *3 - 190 0180C/2
*3 - 190 0200/C2 2.00mm *3 - 190 0200/C2
*3 - 190 0250/C2 2.50mm *3 - 190 0250/C2
*3 - 190 0280/C2 2.80mm *3 - 190 0280/C2
*3 - 190 0300C/2 3.00mm *3 - 190 0300C/2
3 - 190 0320C 3.20mm 3 - 190 0320C
3 - 190 0330C 3.30mm 3 - 190 0330C
3 - 190 0350C 3.50mm 3 - 190 0350C
3 - 190 0380C 3.80mm 3 - 190 0380C
3 - 190 0400C 4.00mm 3 - 190 0400C
3 - 190 0420C 4.20mm 3 - 190 0420C
3 - 190 0450C 4.50mm 3 - 190 0450C
3 - 190 0480C 4.80mm 3 - 190 0480C
3 - 190 0500C 5.00mm 3 - 190 0500C
3 - 190 0520C 5.20mm 3 - 190 0520C
3 - 190 0550C 5.50mm 3 - 190 0550C
3 - 190 0600C 6.00mm 3 - 190 0600C
3 - 190 0650C 6.50mm 3 - 190 0650C
3 - 190 0700C 7.00mm 3 - 190 0700C
3 - 190 0750C 7.50mm 3 - 190 0750C
3 - 190 0800C 8.00mm 3 - 190 0800C
3 - 190 0850C 8.50mm 3 - 190 0850C
3 - 190 0900C 9.00mm 3 - 190 0900C
3 - 190 0950C 9.50mm 3 - 190 0950C
3 - 190 1000C 10.0mm 3 - 190 1000C
3 - 190 1050C 10.5mm 3 - 190 1050C
3 - 190 1100C 11.0mm 3 - 190 1100C
3 - 190 1150C 11.5mm 3 - 190 1150C
3 - 190 1200C 12.0mm 3 - 190 1200C
3 - 190 1250C 12.5mm 3 - 190 1250C
3 - 190 1300C 13.0mm 3 - 190 1300C
PLEASE NOTE: Denotes 2 drills per card*
E and OE
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
014
DRILL BITS
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
Double Ended Stubs
* 3 - 153 0280C/2 2.8mm 3 - 153 0280
* 3 - 153 0300C/2 3.0mm 3 - 153 0300
* 3 - 153 0320C/2 3.2mm 3 - 153 0320
* 3 - 153 0330C/2 3.3mm 3 - 153 0330
* 3 - 153 0350C/2 3.5mm 3 - 153 0350
* 3 - 153 0380C/2 3.8mm 3 - 153 0380
* 3 - 153 0400C/2 4.0mm 3 - 153 0400
* 3 - 153 0410C/2 4.1mm 3 - 153 0410
* 3 - 153 0420C/2 4.2mm 3 - 153 0420
* 3 - 153 0450C/2 4.5mm 3 - 153 0450
* 3 - 153 0480C/2 4.8mm 3 - 153 0480
* 3 - 153 0490C/2 4.9mm 3 - 153 0490
* 3 - 153 0500C/2 5.0mm 3 - 153 0500
* 3 - 153 0520C/2 5.2mm 3 - 153 0520
3 - 153 0550C 5.5mm 3 - 153 0550
3 - 153 0600C 6.0mm 3 - 153 0600
*
E and OE
PLEASE NOTE: Denotes 2 drills per card
1. The term "HSS" is an acronym for High Speed Steel, the
material of choice when high heat / temperature and speed are
criteria.
2. The point grinding of an HSS drill bit determines what material
type the bit can tackle or penetrate.
3. The point grinding of EDGE industrial and Extreme industrial
drill bits have been proved to reduce "end thrust" by 60 - 70%.
This is the force required to penetrate.
4. Use speed formula shown on page 11.
015
DRILL BIT SETS
PRODUCT CODE SIZE
Steel
3 - 990 9101 6 PIECE SET (Plastic Box)
H.S.S. 2 - 8mm
2,3,4,5,6 + 8mm
3 - 990 9104 13 PIECE SET (Plastic Box)
1,5 - 6,5 x 0.5mm Incl. 3,2 & 4,8mm
3 - 990 9025 10 PIECE SET (Plastic Box)
1 - 10 X 1.0mm
3 - 990 9104 13 PIECE SET (Plastic Box)
1,5 - 6,5 x 0.5mm Incl. 3,2 & 4,8mm
E and OE
PRODUCT CODE SIZE
016
DRILL BIT SETSSteel
Bright Finished
3 - 990 9000 10 PIECE SET (Metal Box)
1 - 10 X 1.0mm
3 - 990 9119 19 PIECE SET (Metal Box)
1 - 10 X 0,5mm
3 - 990 9131 25 PIECE SET (Metal Box)
1 - 13 x 0,5mm
3 - 999 9101 INDUSTRIAL BLACK / BRONZE
6 piece set (Plastic Box)
H.S.S. 2 - 8mm
2,3,4,5,6 + 8mm
3 - 999 9025 INDUSTRIAL BLACK / BRONZE
10 piece set (Plastic Box)
1 - 10 X 1.0mm
3 - 999 9119 INDUSTRIAL BLACK / BRONZE
19 piece set (Metal Box)
1 - 10 X 0,5mm
3 - 999 9132 INDUSTRIAL BLACK / BRONZE
25 piece set (Metal Box)
1 - 13 x 0,5mm
E and OE
Industrial Steel
015
DRILL BIT SETS
PRODUCT CODE SIZE
Steel
3 - 990 9101 6 PIECE SET (Plastic Box)
H.S.S. 2 - 8mm
2,3,4,5,6 + 8mm
3 - 990 9104 13 PIECE SET (Plastic Box)
1,5 - 6,5 x 0.5mm Incl. 3,2 & 4,8mm
3 - 990 9025 10 PIECE SET (Plastic Box)
1 - 10 X 1.0mm
3 - 990 9104 13 PIECE SET (Plastic Box)
1,5 - 6,5 x 0.5mm Incl. 3,2 & 4,8mm
E and OE
PRODUCT CODE SIZE
016
DRILL BIT SETSSteel
Bright Finished
3 - 990 9000 10 PIECE SET (Metal Box)
1 - 10 X 1.0mm
3 - 990 9119 19 PIECE SET (Metal Box)
1 - 10 X 0,5mm
3 - 990 9131 25 PIECE SET (Metal Box)
1 - 13 x 0,5mm
3 - 999 9101 INDUSTRIAL BLACK / BRONZE
6 piece set (Plastic Box)
H.S.S. 2 - 8mm
2,3,4,5,6 + 8mm
3 - 999 9025 INDUSTRIAL BLACK / BRONZE
10 piece set (Plastic Box)
1 - 10 X 1.0mm
3 - 999 9119 INDUSTRIAL BLACK / BRONZE
19 piece set (Metal Box)
1 - 10 X 0,5mm
3 - 999 9132 INDUSTRIAL BLACK / BRONZE
25 piece set (Metal Box)
1 - 13 x 0,5mm
E and OE
Industrial Steel
017
DRILL BIT SETS
DRILL BIT SETS
PRODUCT CODE SIZE
Wood
Masonry /Concrete / Combo
3 - 990 9302 5 PIECE SET (Plastic Box)
BRAD POINT SPIRAL
4-10 m
4,5,6,8+10mm
3 - 990 9401 5 PIECE SET MASONRY (Plastic Box)
4 -10mm
4,5,6,8+10mm
3 - 777 0000 5 PIECE SET CONCRETE (Plastic Box)
4 -10mm
4,5,6,8+1 0mm
3 - 444 0000 4 PIECE SET S D S (Plastic Box)
5 -10mm
5,6,8+10 X 110mm
E and OE
018
DRILL BITS
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
Masonry
3 - 194 0300C 3.0mm 3 - 1940300
3 - 194 0400C 4.0mm 3 - 1940400
3 - 194 0450C 4.5mm 3 - 194 0450
3 - 194 0500C 5.0mm 3 - 1940500
3 - 194 0550C 5.5mm 3 - 1940550
3 - 194 0600C 6.0mm 3 - 1940600
3 - 199 0600C 6x150mm 3 - 199 0600
3 - 194 0650C 6.5mm 3 - 1940650
3 - 194 0700C 7.0mm 3 - 1940700
3 - 194 0750C 7.5mm 3 - 1940750
3 - 194 0800C 8.0mm 3 - 1940800
3 - 199 0800C 8x150mm 3 - 199 0800
3 - 194 0850C 8.5mm 3 - 1940850
3 - 194 0900C 9.0mm 3 - 1940900
3 - 194 0950C 9.5mm 3 - 1940950
3 - 194 1000C 10.0mm 3 - 1941000
3 - 199 1000C 10x150mm 3 - 1991000
3 - 194 1 100C 11.0mm 3 - 1941100
3 - 194 1200C 12.0mm 3 - 1941200
3 - 194 1300C 13.0mm 3 - 1941300
3 - 194 1400C 14.0mm 3 - 1941400
3 - 194 1500C 15.0mm 3 - 1941500
3 - 194 1600C 16.0mm 3 - 194 1600
3 - 194 1700C 17.0mm 3 - 1941700
3 - 194 1800C 18.0mm 3 - 1941800
3 - 194 1900C 19.0mm 3 - 1941900
3 - 194 2000C 20.0mm 3 - 1942000
3 - 194 2200C 22.0mm 3 - 1942200
3 - 194 2400C 24.0mm 3 - 1942400
3 - 194 2500C 25.0mm 3 - 1942500
E and OE
017
DRILL BIT SETS
DRILL BIT SETS
PRODUCT CODE SIZE
Wood
Masonry /Concrete / Combo
3 - 990 9302 5 PIECE SET (Plastic Box)
BRAD POINT SPIRAL
4-10 m
4,5,6,8+10mm
3 - 990 9401 5 PIECE SET MASONRY (Plastic Box)
4 -10mm
4,5,6,8+10mm
3 - 777 0000 5 PIECE SET CONCRETE (Plastic Box)
4 -10mm
4,5,6,8+1 0mm
3 - 444 0000 4 PIECE SET S D S (Plastic Box)
5 -10mm
5,6,8+10 X 110mm
E and OE
018
DRILL BITS
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
Masonry
3 - 194 0300C 3.0mm 3 - 1940300
3 - 194 0400C 4.0mm 3 - 1940400
3 - 194 0450C 4.5mm 3 - 194 0450
3 - 194 0500C 5.0mm 3 - 1940500
3 - 194 0550C 5.5mm 3 - 1940550
3 - 194 0600C 6.0mm 3 - 1940600
3 - 199 0600C 6x150mm 3 - 199 0600
3 - 194 0650C 6.5mm 3 - 1940650
3 - 194 0700C 7.0mm 3 - 1940700
3 - 194 0750C 7.5mm 3 - 1940750
3 - 194 0800C 8.0mm 3 - 1940800
3 - 199 0800C 8x150mm 3 - 199 0800
3 - 194 0850C 8.5mm 3 - 1940850
3 - 194 0900C 9.0mm 3 - 1940900
3 - 194 0950C 9.5mm 3 - 1940950
3 - 194 1000C 10.0mm 3 - 1941000
3 - 199 1000C 10x150mm 3 - 1991000
3 - 194 1 100C 11.0mm 3 - 1941100
3 - 194 1200C 12.0mm 3 - 1941200
3 - 194 1300C 13.0mm 3 - 1941300
3 - 194 1400C 14.0mm 3 - 1941400
3 - 194 1500C 15.0mm 3 - 1941500
3 - 194 1600C 16.0mm 3 - 194 1600
3 - 194 1700C 17.0mm 3 - 1941700
3 - 194 1800C 18.0mm 3 - 1941800
3 - 194 1900C 19.0mm 3 - 1941900
3 - 194 2000C 20.0mm 3 - 1942000
3 - 194 2200C 22.0mm 3 - 1942200
3 - 194 2400C 24.0mm 3 - 1942400
3 - 194 2500C 25.0mm 3 - 1942500
E and OE
DRILL BITS
019
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
Masonry Long
3 - 196 0600C 6 x 400mm 3 - 196 0600
3 - 196 0800C 8 x 400mm 3 - 196 0800
3 - 196 1000C 10 x 400mm 3 - 196 1000
3 - 196 1200C 12 x 400mm 3 - 196 1200
3 - 196 1300C 13 x 400mm 3 - 196 1300
3 - 196 1400C 14 x 400mm 3 - 196 1400
3 - 196 1600C 16 x 400mm 3 - 196 1600
3 - 196 1800C 18 x 400mm 3 - 196 1800
3 - 196 2000C 20 x 400mm 3 - 196 2000
3 - 196 2200C 22 x 400mm 3 - 196 2200
3 - 196 2400C 24 x 400mm 3 - 196 2400
3 - 196 2500C 25 x 400mm 3 - 196 2500
E and OE
020
BLACK / SILVER DRILL BIT
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
Concrete Hex Shank
3 - 777 0300C 3.0mm 3 - 7770300
3 - 777 0400C 4.0mm 3 - 777 0400
3 - 777 0450C 4.5mm 3 - 7770450
3 - 777 0500C 5.0mm 3 - 777 0500
3 - 777 0550C 5.5mm 3 - 7770550
3 - 777 0600C 6.0mm 3 - 777 0600
3 - 779 0600C 6 x 150mm 3 - 779 0600
3 - 777 0650C 6.5mm 3 - 777 0650
3 - 777 0700C 7.0mm 3 - 777 0700
3 - 777 0750C 7.5mm 3 - 777 0750
3 - 777 0800C 8.0mm 3 - 777 0800
3 - 779 0800C 8 x 150mm 3 - 779 0800
3 - 777 0850C 8.5mm 3 - 7770850
3 - 777 0900C 9.0mm 3 - 7770900
3 - 777 0950C 9.5mm 3 - 7770950
3 - 777 1000C 10.0mm 3 - 777 1000
3 - 779 1000C 10 x 150mm 3 - 779 1000
3 - 777 1 100C 11.0mm 3 - 777 1100
3 - 777 1200C 12.0mm 3 - 777 1200
3 - 777 1300C 13.0mm 3 - 777 1300
3 - 777 1400C 14.0mm 3 - 777 1400
3 - 777 1500C 15.0mm 3 - 777 1500
3 - 777 1600C 16.0mm 3 - 777 1600
3 - 777 1700C 17.0mm 3 - 777 1700
3 - 777 1800C 18.0mm 3 - 777 1800
3 - 777 1900C 19.0mm 3 - 777 1900
3 - 777 2000C 20.0mm 3 - 777 2000
3 - 777 2200C 22.0mm 3 - 777 2200
3 - 777 2400C 24.0mm 3 - 777 2400
3 - 777 2500C 25.0mm 3 - 777 2500
E and OE
DRILL BITS
019
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
Masonry Long
3 - 196 0600C 6 x 400mm 3 - 196 0600
3 - 196 0800C 8 x 400mm 3 - 196 0800
3 - 196 1000C 10 x 400mm 3 - 196 1000
3 - 196 1200C 12 x 400mm 3 - 196 1200
3 - 196 1300C 13 x 400mm 3 - 196 1300
3 - 196 1400C 14 x 400mm 3 - 196 1400
3 - 196 1600C 16 x 400mm 3 - 196 1600
3 - 196 1800C 18 x 400mm 3 - 196 1800
3 - 196 2000C 20 x 400mm 3 - 196 2000
3 - 196 2200C 22 x 400mm 3 - 196 2200
3 - 196 2400C 24 x 400mm 3 - 196 2400
3 - 196 2500C 25 x 400mm 3 - 196 2500
E and OE
020
BLACK / SILVER DRILL BIT
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
Concrete Hex Shank
3 - 777 0300C 3.0mm 3 - 7770300
3 - 777 0400C 4.0mm 3 - 777 0400
3 - 777 0450C 4.5mm 3 - 7770450
3 - 777 0500C 5.0mm 3 - 777 0500
3 - 777 0550C 5.5mm 3 - 7770550
3 - 777 0600C 6.0mm 3 - 777 0600
3 - 779 0600C 6 x 150mm 3 - 779 0600
3 - 777 0650C 6.5mm 3 - 777 0650
3 - 777 0700C 7.0mm 3 - 777 0700
3 - 777 0750C 7.5mm 3 - 777 0750
3 - 777 0800C 8.0mm 3 - 777 0800
3 - 779 0800C 8 x 150mm 3 - 779 0800
3 - 777 0850C 8.5mm 3 - 7770850
3 - 777 0900C 9.0mm 3 - 7770900
3 - 777 0950C 9.5mm 3 - 7770950
3 - 777 1000C 10.0mm 3 - 777 1000
3 - 779 1000C 10 x 150mm 3 - 779 1000
3 - 777 1 100C 11.0mm 3 - 777 1100
3 - 777 1200C 12.0mm 3 - 777 1200
3 - 777 1300C 13.0mm 3 - 777 1300
3 - 777 1400C 14.0mm 3 - 777 1400
3 - 777 1500C 15.0mm 3 - 777 1500
3 - 777 1600C 16.0mm 3 - 777 1600
3 - 777 1700C 17.0mm 3 - 777 1700
3 - 777 1800C 18.0mm 3 - 777 1800
3 - 777 1900C 19.0mm 3 - 777 1900
3 - 777 2000C 20.0mm 3 - 777 2000
3 - 777 2200C 22.0mm 3 - 777 2200
3 - 777 2400C 24.0mm 3 - 777 2400
3 - 777 2500C 25.0mm 3 - 777 2500
E and OE
021
BLACK / SILVER DRILL BIT
Glass and Tile Drills
Diamond Core Drill Bits
CARDED
CARDED
SIZE BULK
PRODUCTCODE
PRODUCTCODE
PRODUCTCODE
DESCRIPTION
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
Concrete Long Hex Shank
3 - 778 0600C 6 x 400mm 3 - 778 0600
3 - 778 0800C 8 x 400mm 3 - 778 0800
3 - 778 1000C 10 x 400mm 3 - 778 1000
3 - 778 1200C 12 x 400mm 3 - 778 1200
3 - 778 1300C 13 x 400mm 3 - 778 1300
3 - 778 1400C 14 x 400mm 3 - 778 1400
3 - 778 1600C 16 x 400mm 3 - 778 1600
3 - 778 1800C 18 x 400mm 3 - 778 1800
3 - 778 2000C 20 x 400mm 3 - 778 2000
3 - 240 0500C 5.0mm 3 -240 0500
3 - 240 0600C 6.0mm 3 -240 0600
3 - 240 0800C 8.0mm 3 -240 0800
3 - 240 1000C 10.0mm 3 -240 1000
3 - 240 1200C 12.0mm 3 -240 1200
3 - 241 0300C 3.0mm DIAMOND DRILL
3 - 241 0400C 4.0mm DIAMOND DRILL
3 - 241 0600C 6.0mm DIAMOND DRILL
3 - 241 0800C 8.0mm DIAMOND DRILL
3 - 241 1000C 10.0mm DIAMOND DRILL
3 - 241 1200C 12.0mm DIAMOND DRILL
E and OE
NB: Diamond drilling requires the continued and unabated use of water as a coolant and lubricant.
DRILLBITS
022
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
SDS Concrete Double Flute
3 - 444 05110C SDS 5.0 X 110 3 - 444 05110
3 - 444 05160C SDS 5.0 X 160 3 - 444 05160
3 - 444 55160C SDS 5.5 X 160 3 - 444 55160
3 - 444 06110C SDS 6.0 X 110 3 - 444 06110
3 - 444 06160C SDS 6.0 X 160 3 - 444 06160
3 - 444 65160C SDS 6.5 X 160 3 - 444 65160
3 - 444 06210C SDS 6.0 X 210 3 - 444 06210
3 - 444 06450C SDS 6.0 X 450 3 - 444 064,50
3 - 444 08110C SDS 8.0 X l 10 3 - 444 08110
3 - 444 08160C SDS 8.0 X 160 3 - 444 08160
3 - 444 08210C SDS 8.0 X 210 3 - 444 08210
3 - 444 08450C SDS 8.0 X 450 3 - 444 08450
3 - 444 10110C SDS 10 X 110 3 - 444 10110
3 - 444 10160C SDS 10 X 160 3 - 444 10160
3 - 444 10210C SDS 10 X 210 3 - 444 10210
3 - 444 10260C SDS 10 X 260 3 - 444 10260
3 - 444 102450C SDS 10 X 450 3 - 444 10450
3 - 444 12160C SDS 12 X 160 3 - 444 12160
3 - 444 12210C SDS 12 X 210 3 - 444 12210
3 - 444 12260C SDS 12 X 260 3 - 444 12260
3 - 444 12450C SDS 12 X 450 3 - 444 12450
3 - 444 13160C SDS 13 X 160 3 - 444 13160
3 - 444 13210C SDS 13 X 210 3 - 444 13210
3 - 444 13260C SDS 13 X 260 3 - 444 13260
3 - 444 13310C SDS 13 X 310 3 - 444 13310
3 - 444 14160C SDS 14 X 160 3 - 444 14160
3 - 444 14210C SDS 14 x 210 3 - 444 14210
3 - 444 14260C SDS 14 X 260 3 - 444 14260
3 - 444 14310C SDS 14 X 310 3 - 444 14310
3 - 444 14450C SDS 14 X 450 3 - 444 14450
E and OE
021
BLACK / SILVER DRILL BIT
Glass and Tile Drills
Diamond Core Drill Bits
CARDED
CARDED
SIZE BULK
PRODUCTCODE
PRODUCTCODE
PRODUCTCODE
DESCRIPTION
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
Concrete Long Hex Shank
3 - 778 0600C 6 x 400mm 3 - 778 0600
3 - 778 0800C 8 x 400mm 3 - 778 0800
3 - 778 1000C 10 x 400mm 3 - 778 1000
3 - 778 1200C 12 x 400mm 3 - 778 1200
3 - 778 1300C 13 x 400mm 3 - 778 1300
3 - 778 1400C 14 x 400mm 3 - 778 1400
3 - 778 1600C 16 x 400mm 3 - 778 1600
3 - 778 1800C 18 x 400mm 3 - 778 1800
3 - 778 2000C 20 x 400mm 3 - 778 2000
3 - 240 0500C 5.0mm 3 -240 0500
3 - 240 0600C 6.0mm 3 -240 0600
3 - 240 0800C 8.0mm 3 -240 0800
3 - 240 1000C 10.0mm 3 -240 1000
3 - 240 1200C 12.0mm 3 -240 1200
3 - 241 0300C 3.0mm DIAMOND DRILL
3 - 241 0400C 4.0mm DIAMOND DRILL
3 - 241 0600C 6.0mm DIAMOND DRILL
3 - 241 0800C 8.0mm DIAMOND DRILL
3 - 241 1000C 10.0mm DIAMOND DRILL
3 - 241 1200C 12.0mm DIAMOND DRILL
E and OE
NB: Diamond drilling requires the continued and unabated use of water as a coolant and lubricant.
DRILLBITS
022
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
SDS Concrete Double Flute
3 - 444 05110C SDS 5.0 X 110 3 - 444 05110
3 - 444 05160C SDS 5.0 X 160 3 - 444 05160
3 - 444 55160C SDS 5.5 X 160 3 - 444 55160
3 - 444 06110C SDS 6.0 X 110 3 - 444 06110
3 - 444 06160C SDS 6.0 X 160 3 - 444 06160
3 - 444 65160C SDS 6.5 X 160 3 - 444 65160
3 - 444 06210C SDS 6.0 X 210 3 - 444 06210
3 - 444 06450C SDS 6.0 X 450 3 - 444 064,50
3 - 444 08110C SDS 8.0 X l 10 3 - 444 08110
3 - 444 08160C SDS 8.0 X 160 3 - 444 08160
3 - 444 08210C SDS 8.0 X 210 3 - 444 08210
3 - 444 08450C SDS 8.0 X 450 3 - 444 08450
3 - 444 10110C SDS 10 X 110 3 - 444 10110
3 - 444 10160C SDS 10 X 160 3 - 444 10160
3 - 444 10210C SDS 10 X 210 3 - 444 10210
3 - 444 10260C SDS 10 X 260 3 - 444 10260
3 - 444 102450C SDS 10 X 450 3 - 444 10450
3 - 444 12160C SDS 12 X 160 3 - 444 12160
3 - 444 12210C SDS 12 X 210 3 - 444 12210
3 - 444 12260C SDS 12 X 260 3 - 444 12260
3 - 444 12450C SDS 12 X 450 3 - 444 12450
3 - 444 13160C SDS 13 X 160 3 - 444 13160
3 - 444 13210C SDS 13 X 210 3 - 444 13210
3 - 444 13260C SDS 13 X 260 3 - 444 13260
3 - 444 13310C SDS 13 X 310 3 - 444 13310
3 - 444 14160C SDS 14 X 160 3 - 444 14160
3 - 444 14210C SDS 14 x 210 3 - 444 14210
3 - 444 14260C SDS 14 X 260 3 - 444 14260
3 - 444 14310C SDS 14 X 310 3 - 444 14310
3 - 444 14450C SDS 14 X 450 3 - 444 14450
E and OE
DRILL BITS
024
CARDED
CARDED
SIZE
SIZE
BULK
BULK
PRODUCTCODE
PRODUCTCODE
PRODUCTCODE
PRODUCTCODE
Wood Brad Point
Wood Forstner Bit
3 -193 0300C 3.0mm 3 -1930300
3 -193 0400C 4.0mm 3 -193 0400
3 -193 0500C 5.0mm 3 -193 0500
3 -193 0600C 6.0mm 3 -1930600
3 -193 0800C 8.0mm 3 -1930800
3 -193 0900C 9.0mm 3 -1930900
3 -193 1000C 10.0mm 3 -193 1000
3 -193 1200C 12.0mm 3 -193 1200
3 -193 1400C 14.0mm 3 -193 1400
3 -193 1600C 16.0mm 3 -193 1600
3 - 990 1038C 35.0mm 3 - 990 1038
E and OE
DRILL BITS
023
SDS Concrete Double Flute
1. A masonry, concrete or SDS drill is only as good as the grade of
tungsten carbide used in the bit and the brazing process to secure it
in the body of the bit.
2. The use of tape, insulation or masking, helps locate the drill bit when
drilling into tiles, glass, marble or granite.
3. For optimum cutting results a masonry drill could never replace a
steel drill and vice versa. This is because of the vastly different
cutting actions. A masonry drill grinds and crushes; a steel drill cuts.
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
3 - 444 16160C SDS 16 X 160 3 - 444 16160
3 - 444 16210C SDS 16 X 210 3 - 444 16210
3 - 444 16260C SDS 16 X 260 3 - 444 16260
3 - 444 16310C SDS 16 X 310 3 - 444 16310
3 - 444 16450C SDS 16 X 450 3 - 444 16450C
3 - 444 18210C SDS 18 X 210 3 - 444 18210
3 - 444 18310C SDS 18 X 310 3 - 444 18310
3 - 444 19200C SDS 19 X 200 3 - 444 19200
3 - 444 19300C SDS 19 X 300 3 - 444 19300
3 - 444 20250C SDS 20 X 250 3 - 444 20250
3 - 444 20350C SDS 20 X 350 3 - 444 20350
3 - 444 20450C SDS 20 X 450 3 - 444 20450
3 - 444 22250C SDS 22 X 250 3 - 444 22250
3 - 444 22350C SDS 22 X 350 3 - 444 22350
3 - 444 24250C SDS 24 X 250 3 - 444 24250
3 - 444 24450C SDS 24 X 450 3 - 444 24450
3 - 444 25250C SDS 25 X 250 3 - 444 25250
3 - 444 25450C SDS 25 X 450 3 - 444 25450
E and OE
DRILL BITS
024
CARDED
CARDED
SIZE
SIZE
BULK
BULK
PRODUCTCODE
PRODUCTCODE
PRODUCTCODE
PRODUCTCODE
Wood Brad Point
Wood Forstner Bit
3 -193 0300C 3.0mm 3 -1930300
3 -193 0400C 4.0mm 3 -193 0400
3 -193 0500C 5.0mm 3 -193 0500
3 -193 0600C 6.0mm 3 -1930600
3 -193 0800C 8.0mm 3 -1930800
3 -193 0900C 9.0mm 3 -1930900
3 -193 1000C 10.0mm 3 -193 1000
3 -193 1200C 12.0mm 3 -193 1200
3 -193 1400C 14.0mm 3 -193 1400
3 -193 1600C 16.0mm 3 -193 1600
3 - 990 1038C 35.0mm 3 - 990 1038
E and OE
DRILL BITS
023
SDS Concrete Double Flute
1. A masonry, concrete or SDS drill is only as good as the grade of
tungsten carbide used in the bit and the brazing process to secure it
in the body of the bit.
2. The use of tape, insulation or masking, helps locate the drill bit when
drilling into tiles, glass, marble or granite.
3. For optimum cutting results a masonry drill could never replace a
steel drill and vice versa. This is because of the vastly different
cutting actions. A masonry drill grinds and crushes; a steel drill cuts.
CARDED SIZE BULK
PRODUCTCODE
PRODUCTCODE
3 - 444 16160C SDS 16 X 160 3 - 444 16160
3 - 444 16210C SDS 16 X 210 3 - 444 16210
3 - 444 16260C SDS 16 X 260 3 - 444 16260
3 - 444 16310C SDS 16 X 310 3 - 444 16310
3 - 444 16450C SDS 16 X 450 3 - 444 16450C
3 - 444 18210C SDS 18 X 210 3 - 444 18210
3 - 444 18310C SDS 18 X 310 3 - 444 18310
3 - 444 19200C SDS 19 X 200 3 - 444 19200
3 - 444 19300C SDS 19 X 300 3 - 444 19300
3 - 444 20250C SDS 20 X 250 3 - 444 20250
3 - 444 20350C SDS 20 X 350 3 - 444 20350
3 - 444 20450C SDS 20 X 450 3 - 444 20450
3 - 444 22250C SDS 22 X 250 3 - 444 22250
3 - 444 22350C SDS 22 X 350 3 - 444 22350
3 - 444 24250C SDS 24 X 250 3 - 444 24250
3 - 444 24450C SDS 24 X 450 3 - 444 24450
3 - 444 25250C SDS 25 X 250 3 - 444 25250
3 - 444 25450C SDS 25 X 450 3 - 444 25450
E and OE
025
DRILL BITSWood Flat 3 Spur
PRODUCTCODE
PRODUCTCODE
3 - 192 0600C 6.0mm 3 - 192 0600
3 - 192 0800C 8.0mm 3 - 192 0800
3 - 192 1000C 10.0mm 3 - 192 1000
3 - 192 1200C 12.0mm 3 - 192 1200
3 - 192 1300C 13.0mm 3 - 192 1300
3 - 192 1400C 14.0mm 3 - 192 1400
3 - 192 1600C 16.0mm 3 - 192 1600
3 - 192 1800C 18.0mm 3 - 192 1800
3 - 192 1900C 19.0mm 3 - 192 1900
3 - 192 2000C 20.0mm 3 - 192 2000
3 - 192 2200C 22.0mm 3 - 192 2200
3 - 192 2400C 24.0mm 3 - 192 2400
3 - 192 2500C 25.0mm 3 - 192 2500
3 - 192 2800C 28.0mm 3 - 192 2800
3 - 192 3000C 30.0mm 3 - 192 3000
3 - 192 3200C 32.0mm 3 - 192 3200
3 - 192 3500C 35.0mm 3 - 192 3500
3 - 192 3800C 38.0mm 3 - 192 3800
3 - 192 4000C 40.0mm 3 - 192 4000
E and OE
CARDED SIZE BULK
026
DRILL BITSWood Flat Long 3 Spur
PRODUCTCODE
PRODUCTCODE
3 -198 0600C 6.0mm 3 -198 0600
3 -198 0800C 8.0mm 3 -198 0800
3 -198 1000C 10.0mm 3 -198 1000
3 -198 1200C 12.0mm 3 -198 1200
3 -198 1300C 13.0mm 3 -198 1300
3 -198 1400C 14.0mm 3 -198 1400
3 -198 1600C 16.0mm 3 - 198 1600
3 -198 1800C 18.0mm 3 -198 1800
3 -198 1900C 19.0mm 3 -198 1900
3 -198 2000C 20.0mm 3 -198 2000
3 -198 2200C 22.0mm 3 -198 2200
3 -198 2400C 24.0mm 3 -198 2400
3 -198 2500C 25.0mm 3 -198 2500
3 -198 3200C 32.0mm 3 -198 3200
E and OE
CARDED SIZE BULK
025
DRILL BITSWood Flat 3 Spur
PRODUCTCODE
PRODUCTCODE
3 - 192 0600C 6.0mm 3 - 192 0600
3 - 192 0800C 8.0mm 3 - 192 0800
3 - 192 1000C 10.0mm 3 - 192 1000
3 - 192 1200C 12.0mm 3 - 192 1200
3 - 192 1300C 13.0mm 3 - 192 1300
3 - 192 1400C 14.0mm 3 - 192 1400
3 - 192 1600C 16.0mm 3 - 192 1600
3 - 192 1800C 18.0mm 3 - 192 1800
3 - 192 1900C 19.0mm 3 - 192 1900
3 - 192 2000C 20.0mm 3 - 192 2000
3 - 192 2200C 22.0mm 3 - 192 2200
3 - 192 2400C 24.0mm 3 - 192 2400
3 - 192 2500C 25.0mm 3 - 192 2500
3 - 192 2800C 28.0mm 3 - 192 2800
3 - 192 3000C 30.0mm 3 - 192 3000
3 - 192 3200C 32.0mm 3 - 192 3200
3 - 192 3500C 35.0mm 3 - 192 3500
3 - 192 3800C 38.0mm 3 - 192 3800
3 - 192 4000C 40.0mm 3 - 192 4000
E and OE
CARDED SIZE BULK
026
DRILL BITSWood Flat Long 3 Spur
PRODUCTCODE
PRODUCTCODE
3 -198 0600C 6.0mm 3 -198 0600
3 -198 0800C 8.0mm 3 -198 0800
3 -198 1000C 10.0mm 3 -198 1000
3 -198 1200C 12.0mm 3 -198 1200
3 -198 1300C 13.0mm 3 -198 1300
3 -198 1400C 14.0mm 3 -198 1400
3 -198 1600C 16.0mm 3 - 198 1600
3 -198 1800C 18.0mm 3 -198 1800
3 -198 1900C 19.0mm 3 -198 1900
3 -198 2000C 20.0mm 3 -198 2000
3 -198 2200C 22.0mm 3 -198 2200
3 -198 2400C 24.0mm 3 -198 2400
3 -198 2500C 25.0mm 3 -198 2500
3 -198 3200C 32.0mm 3 -198 3200
E and OE
CARDED SIZE BULK
027
MACHINE AUGERS
MACHINE AUGERS
CARDED
CARDED
SIZE
SIZE
BULK
BULK
PRODUCTCODE
PRODUCTCODE
PRODUCTCODE
PRODUCTCODE
Hex Shank
Long
3 - 238 0600C 6 x 300 3 - 238 0600
3 - 238 0800C 8 x 300 3 - 238 0800
3 - 238 1000C 10 X 300 3 - 238 1000
3 - 238 1200C 12 x 300 3 - 238 1200
3 - 238 1300C 13 x 300 3 - 238 1300
3 - 238 1400C 14 x 300 3 - 238 1400
3 - 238 1600C 16 x 300 3 - 238 1600
3 - 238 1900C 19 x 300 3 - 238 1900
3 - 238 2200C 22 x 300 3 - 238 2200
3 - 238 2500C 25 x 300 3 - 238 2500
3 - 236 0800C 8 x 460 3 - 236 0800
3 - 236 1000C 10 x 460 3 - 236 1000
3 - 236 1200C 12 x 460 3 - 236 1200
3 - 236 1300C 13 x 460 3 - 236 1300
3 - 236 1400C 14 x 460 3 - 236 1400
3 - 236 1600C 16 x 460 3 - 236 1600
3 - 236 1750C 17.5 x 460 3 - 236 1750
3 - 236 1900C 19 x 460 3 - 236 1900
3 - 236 2200C 22 x 460 3 - 236 2200
3 - 236 2500C 25 x 460 3 - 236 2500
E and OE
028
SCOTCH EYE AUGERS
PRODUCTCODE
SIZE
3 - 237 1000 10.0mm x 610mm
3 - 237 1300 13mm x 610mm
3 - 237 1600 16mm x 610mm
3 - 237 1750 17,5mm x 610mm
3 - 237 1900 19mm x 610mm
3 - 237 2200 22mm x 610mm
3 - 237 3200 32mm x 610mm
3 - 237 3800 38mm x 610mm
E and OE
1. Just as a steel drill 'cuts' and a masonry drill 'grinds' and
'crushes' so a wood drill 'tears'.
2. Wood brad point bits have a more robust type geometry
facilitating the quick cutting of harder wood types, and blind
hole applications where dowel sticks are used.
3. Edge wood flat drills have a 3 spur setup. The 2 outer spurs
prevent the work piece from surface damage due to the tearing
of oversize holes.
027
MACHINE AUGERS
MACHINE AUGERS
CARDED
CARDED
SIZE
SIZE
BULK
BULK
PRODUCTCODE
PRODUCTCODE
PRODUCTCODE
PRODUCTCODE
Hex Shank
Long
3 - 238 0600C 6 x 300 3 - 238 0600
3 - 238 0800C 8 x 300 3 - 238 0800
3 - 238 1000C 10 X 300 3 - 238 1000
3 - 238 1200C 12 x 300 3 - 238 1200
3 - 238 1300C 13 x 300 3 - 238 1300
3 - 238 1400C 14 x 300 3 - 238 1400
3 - 238 1600C 16 x 300 3 - 238 1600
3 - 238 1900C 19 x 300 3 - 238 1900
3 - 238 2200C 22 x 300 3 - 238 2200
3 - 238 2500C 25 x 300 3 - 238 2500
3 - 236 0800C 8 x 460 3 - 236 0800
3 - 236 1000C 10 x 460 3 - 236 1000
3 - 236 1200C 12 x 460 3 - 236 1200
3 - 236 1300C 13 x 460 3 - 236 1300
3 - 236 1400C 14 x 460 3 - 236 1400
3 - 236 1600C 16 x 460 3 - 236 1600
3 - 236 1750C 17.5 x 460 3 - 236 1750
3 - 236 1900C 19 x 460 3 - 236 1900
3 - 236 2200C 22 x 460 3 - 236 2200
3 - 236 2500C 25 x 460 3 - 236 2500
E and OE
028
SCOTCH EYE AUGERS
PRODUCTCODE
SIZE
3 - 237 1000 10.0mm x 610mm
3 - 237 1300 13mm x 610mm
3 - 237 1600 16mm x 610mm
3 - 237 1750 17,5mm x 610mm
3 - 237 1900 19mm x 610mm
3 - 237 2200 22mm x 610mm
3 - 237 3200 32mm x 610mm
3 - 237 3800 38mm x 610mm
E and OE
1. Just as a steel drill 'cuts' and a masonry drill 'grinds' and
'crushes' so a wood drill 'tears'.
2. Wood brad point bits have a more robust type geometry
facilitating the quick cutting of harder wood types, and blind
hole applications where dowel sticks are used.
3. Edge wood flat drills have a 3 spur setup. The 2 outer spurs
prevent the work piece from surface damage due to the tearing
of oversize holes.
029
JIGSAW BLADEST/shank fitting
3 - 251 01TC/2 WOOD FINE CUT T/FIT
3 - 251 06TC/2 WOOD COARSE CUT T/FIT
3 - 251 05TC/2 WOOD CURVE CUT T/FIT
3 - 251 02TC/2 WOOD REVERSE CUT T/FIT
3 - 251 50TC/2 BI-METAL/WOOD T/FIT
3 - 251 13TC/2 METAL 12TPI T/FIT
3 - 251 11TC/2 METAL 21TPI T/FIT
3 - 251 10TC/2 METAL 28TPI T/FIT
3 - 251 01UC/2 WOOD FINE CUT U/FIT
3 - 251 06UC/2 WOOD COARSE CUTU/FIT
3 - 251 05UC/2 WOOD CURVE CUT U/FIT
3 - 251 02UC/2 WOOD REVERSE CUT U/FIT
3 - 251 50UC/2 BI-METAL/WOOD U/FIT
3 - 251 13UC/2 METAL 12TPI U/FIT
3 - 251 11UC/2 METAL 21TPI U/FIT
3 - 251 10UC/2 METAL 28TPI U/FIT
E and OE
PRODUCTCODE
PRODUCTCODE
PRODUCTDESCRIPTION
PRODUCTDESCRIPTION
U/shank fitting
030
EDGEDiamond Cutting Discs
SEGMENTED
CONTINUOUS
PRODUCTCODE
SIZE
3 - 990 115 115 x 2.0 x 7 x 22.23
3 - 990 230 230 x 2.5 x 7 x 22.23
3 - 990 300 300 x 3.0 x 8 x 25.40
3 - 990 350 350 x 3.2 x 8 x 25.40
TURBO FLAT
PRODUCTCODE
PRODUCTCODE
SIZE
SIZE
3 - 990 115T 115 x 2.0 x 7 x 22.23
3 - 990 230T 230 x 2.5 x 7 x 22.23
3 - 990 115C 115 x 2.0 x 7 x 22.23
3 - 990 230C 230 x 2.5 x 7 x 22.23
E and OE
029
JIGSAW BLADEST/shank fitting
3 - 251 01TC/2 WOOD FINE CUT T/FIT
3 - 251 06TC/2 WOOD COARSE CUT T/FIT
3 - 251 05TC/2 WOOD CURVE CUT T/FIT
3 - 251 02TC/2 WOOD REVERSE CUT T/FIT
3 - 251 50TC/2 BI-METAL/WOOD T/FIT
3 - 251 13TC/2 METAL 12TPI T/FIT
3 - 251 11TC/2 METAL 21TPI T/FIT
3 - 251 10TC/2 METAL 28TPI T/FIT
3 - 251 01UC/2 WOOD FINE CUT U/FIT
3 - 251 06UC/2 WOOD COARSE CUTU/FIT
3 - 251 05UC/2 WOOD CURVE CUT U/FIT
3 - 251 02UC/2 WOOD REVERSE CUT U/FIT
3 - 251 50UC/2 BI-METAL/WOOD U/FIT
3 - 251 13UC/2 METAL 12TPI U/FIT
3 - 251 11UC/2 METAL 21TPI U/FIT
3 - 251 10UC/2 METAL 28TPI U/FIT
E and OE
PRODUCTCODE
PRODUCTCODE
PRODUCTDESCRIPTION
PRODUCTDESCRIPTION
U/shank fitting
030
EDGEDiamond Cutting Discs
SEGMENTED
CONTINUOUS
PRODUCTCODE
SIZE
3 - 990 115 115 x 2.0 x 7 x 22.23
3 - 990 230 230 x 2.5 x 7 x 22.23
3 - 990 300 300 x 3.0 x 8 x 25.40
3 - 990 350 350 x 3.2 x 8 x 25.40
TURBO FLAT
PRODUCTCODE
PRODUCTCODE
SIZE
SIZE
3 - 990 115T 115 x 2.0 x 7 x 22.23
3 - 990 230T 230 x 2.5 x 7 x 22.23
3 - 990 115C 115 x 2.0 x 7 x 22.23
3 - 990 230C 230 x 2.5 x 7 x 22.23
E and OE
SIZEPRODUCTCODE mm inches
Bi-Metal Hole Saws
031
BLU MOL
13 - 000 014 14.0mm 9/16
13 - 000 016 16.0mm 5/8
13 - 000 017 17.0mm 11/16
13 - 000 019 19.0mm 3/4
13 - 000 020 20.0mm -
13 - 000 021 21.0mm 13/16
13 - 000 022 22.0mm 7/8
13 - 000 024 24.0mm 15/16
13 - 000 025 25.0mm 1
13 - 000 027 27.0mm 1-1/16
13 - 000 029 29.0mm 1-1/8
13 - 000 030 30.0mm 1-3/16
13 - 000 032 32.0mm 1-1/4
13 - 000 033 33.0mm 1-5/16
13 - 000 035 35.0mm 1-3/8
13 - 000 037 37.0mm 1-7/16
13 -000 038 38.0mm 1-1/2
13 -000 040 40.0mm 1-9/16
13 -000 041 41.0mm 1-5/8
13 -000 043 43.0mm 1-11/16
13 -000 044 44.0mm 1-3/4
13 -000 045 45.0mm -
13 -000 046 46.0mm 1-13/16
13 -000 048 48.0mm 1-7/8
13 -000 050 50.0mm -
13 -000 051 51.0mm 2
13 -000 052 52.0mm 2-1/16
13 -000 054 54.0mm 2-1/8
13 -000 057 57.0mm 2-1/4
13 -000 059 59.0mm 2-5/16
13 -000 060 60.0mm 2-3/8
E and OE 032
BLU MOL
PRODUCTCODE mm inches
Bi-Metal Hole Saws
13 - 000 064 64.0 2-1/2
13 - 000 065 65.0 2-9/16
13 - 000 067 67.0 2-5/8
13 - 000 068 68.0 -
13 - 000 070 70.0 2-3/4
13 - 000 073 73.0 2-7/8
13 - 000 075 75.0 -
13 - 000 076 76.0 3
13 - 000 079 79.0 3-1/8
13 - 000 083 83.0 3-1/4
13 - 000 086 86.0 3-3/8
13 - 000 089 89.0 3-1/2
13 - 000 092 92.0 3-5.8
13 - 000 095 95.0 3-3/4
13 - 000 098 98.0 3-7/8
13 - 000 102 102.0 4
13 - 000 105 105.0 4-1/8
13 - 000 108 108.0 4-1/4
13 - 000 111 111.0 4-3/8
13 - 000 114 114.0 4-1/2
13 - 000 121 121.0 4-3/4
13 - 000 127 127.0 5
13 - 000 140 140.0 5-1/2
13 - 000 146 146.0 5-3/4
13 - 000 152 152.0 6
E and OE
SIZE
SIZEPRODUCTCODE mm inches
Bi-Metal Hole Saws
031
BLU MOL
13 - 000 014 14.0mm 9/16
13 - 000 016 16.0mm 5/8
13 - 000 017 17.0mm 11/16
13 - 000 019 19.0mm 3/4
13 - 000 020 20.0mm -
13 - 000 021 21.0mm 13/16
13 - 000 022 22.0mm 7/8
13 - 000 024 24.0mm 15/16
13 - 000 025 25.0mm 1
13 - 000 027 27.0mm 1-1/16
13 - 000 029 29.0mm 1-1/8
13 - 000 030 30.0mm 1-3/16
13 - 000 032 32.0mm 1-1/4
13 - 000 033 33.0mm 1-5/16
13 - 000 035 35.0mm 1-3/8
13 - 000 037 37.0mm 1-7/16
13 -000 038 38.0mm 1-1/2
13 -000 040 40.0mm 1-9/16
13 -000 041 41.0mm 1-5/8
13 -000 043 43.0mm 1-11/16
13 -000 044 44.0mm 1-3/4
13 -000 045 45.0mm -
13 -000 046 46.0mm 1-13/16
13 -000 048 48.0mm 1-7/8
13 -000 050 50.0mm -
13 -000 051 51.0mm 2
13 -000 052 52.0mm 2-1/16
13 -000 054 54.0mm 2-1/8
13 -000 057 57.0mm 2-1/4
13 -000 059 59.0mm 2-5/16
13 -000 060 60.0mm 2-3/8
E and OE 032
BLU MOL
PRODUCTCODE mm inches
Bi-Metal Hole Saws
13 - 000 064 64.0 2-1/2
13 - 000 065 65.0 2-9/16
13 - 000 067 67.0 2-5/8
13 - 000 068 68.0 -
13 - 000 070 70.0 2-3/4
13 - 000 073 73.0 2-7/8
13 - 000 075 75.0 -
13 - 000 076 76.0 3
13 - 000 079 79.0 3-1/8
13 - 000 083 83.0 3-1/4
13 - 000 086 86.0 3-3/8
13 - 000 089 89.0 3-1/2
13 - 000 092 92.0 3-5.8
13 - 000 095 95.0 3-3/4
13 - 000 098 98.0 3-7/8
13 - 000 102 102.0 4
13 - 000 105 105.0 4-1/8
13 - 000 108 108.0 4-1/4
13 - 000 111 111.0 4-3/8
13 - 000 114 114.0 4-1/2
13 - 000 121 121.0 4-3/4
13 - 000 127 127.0 5
13 - 000 140 140.0 5-1/2
13 - 000 146 146.0 5-3/4
13 - 000 152 152.0 6
E and OE
SIZE
033
BLU MOL
REMGRIT
SIZE
PRODUCTCODE
KIT
PRODUCTCODE mm inches
Bi-Metal Hole Saw Kits
Carbide Edge Hole Saws
13 - 012 19.0 3/4
13 - 014 22.0 7/8
13 - 016 25.0 1
13 - 020 32.0 1-1/4
13 - 022 1-3/8
13 - 024 38.0 1-1/2
13 - 032 51.0 2
E and OE
13 - 00 9592 PLUMBER'S KIT
13 - 00 9593 ELECTRICIAN'S KIT
13 - 00 9595 HANDYMAN'S KIT
13 - 00 9596 JOURNEYMAN'S KIT
13 - 21 4572 TRADESMAN DISPLAY
13 - 21 4573 PROFESSIONAL DISPLAY
034
EDGE
SIZEPRODUCT CODE
Bi-Metal Hole Saws
13 - 999 0014 14.0 mm
13 - 999 0016 16.0 mm
13 - 999 0017 17.0 mm
13 - 999 0019 19.0 mm
13 - 999 0020 20.0 mm
13 - 999 0022 22.0 mm
13 - 999 0025 25.0 mm
13 - 999 0027 27.0 mm
13 - 999 0029 29.0 mm
13 - 999 0030 30.0 mm
13 - 999 0032 32.0 mm
13- 999 0033 33.0 mm
13 - 999 0035 35.0 mm
13 - 999 0037 37.0 mm
13 - 999 0038 38.0 mm
13 - 999 0040 40.0 mm
13 - 999 0041 41.0 mm
13 - 999 0043 43.0 mm
13 - 999 0044 44.0 mm
13 - 999 0046 46.0 mm
13 - 999 0048 48.0 mm
13 - 999 0051 51.0 mm
13 - 999 0052 52.0 mm
13 - 999 0054 54.0 mm
13 - 999 0057 57.0 mm
13 - 999 0059 59.0 mm
13 - 999 0060 60.0 mm
13 - 999 0064 64.0 mm
13 - 999 0065 65.0 mm
13 - 999 0067 67.0 mm
13 - 999 0068 68.0 mm
13 - 999 0070 70.0 mm
13 - 999 0073 73.0 mm
E and OE
033
BLU MOL
REMGRIT
SIZE
PRODUCTCODE
KIT
PRODUCTCODE mm inches
Bi-Metal Hole Saw Kits
Carbide Edge Hole Saws
13 - 012 19.0 3/4
13 - 014 22.0 7/8
13 - 016 25.0 1
13 - 020 32.0 1-1/4
13 - 022 1-3/8
13 - 024 38.0 1-1/2
13 - 032 51.0 2
E and OE
13 - 00 9592 PLUMBER'S KIT
13 - 00 9593 ELECTRICIAN'S KIT
13 - 00 9595 HANDYMAN'S KIT
13 - 00 9596 JOURNEYMAN'S KIT
13 - 21 4572 TRADESMAN DISPLAY
13 - 21 4573 PROFESSIONAL DISPLAY
034
EDGE
SIZEPRODUCT CODE
Bi-Metal Hole Saws
13 - 999 0014 14.0 mm
13 - 999 0016 16.0 mm
13 - 999 0017 17.0 mm
13 - 999 0019 19.0 mm
13 - 999 0020 20.0 mm
13 - 999 0022 22.0 mm
13 - 999 0025 25.0 mm
13 - 999 0027 27.0 mm
13 - 999 0029 29.0 mm
13 - 999 0030 30.0 mm
13 - 999 0032 32.0 mm
13- 999 0033 33.0 mm
13 - 999 0035 35.0 mm
13 - 999 0037 37.0 mm
13 - 999 0038 38.0 mm
13 - 999 0040 40.0 mm
13 - 999 0041 41.0 mm
13 - 999 0043 43.0 mm
13 - 999 0044 44.0 mm
13 - 999 0046 46.0 mm
13 - 999 0048 48.0 mm
13 - 999 0051 51.0 mm
13 - 999 0052 52.0 mm
13 - 999 0054 54.0 mm
13 - 999 0057 57.0 mm
13 - 999 0059 59.0 mm
13 - 999 0060 60.0 mm
13 - 999 0064 64.0 mm
13 - 999 0065 65.0 mm
13 - 999 0067 67.0 mm
13 - 999 0068 68.0 mm
13 - 999 0070 70.0 mm
13 - 999 0073 73.0 mm
E and OE
035
EDGE
EDGE
SIZE
SIZE
PRODUCT CODE
PRODUCT CODE
Bi-Metal Hole Saws
Bi-Metal Hole Saws - Mandrels
13 - 999 0076 76.0 mm
13 - 999 0079 79.0 mm
13 - 999 0083 83.0 mm
13 - 999 0086 86.0 mm
13 - 999 0089 89.0 mm
13 - 999 0092 92.0 mm
13 - 999 0095 95.0 mm
13 - 999 0098 98.0 mm
13 - 999 0102 102.0 mm
13 - 999 0108 108.0 mm
13 - 999 0111 111.0 mm
13 - 999 0114 114.0 mm
13 - 999 0121 121.0 mm
13 - 999 0127 127.0 mm
13 - 999 0140 140.0 mm
13 - 999 0146 146.0 mm
13 - 999 0152 152.0 mm
13 - 917 001 14-30MM 7/16" ROUND
13 - 917 002 14-30MM 3/8" HEX
13 - 917 003 14-30MM 7/16" HEX
13 - 917 005 32-152MM HEX 7/16" QC
13 - 917 008 32-152MM HEX 5/8" HEX
E and OE
036
BLU MOL
PILOT DRILLS
SIZE
SIZE
PRODUCTCODE
PRODUCTCODE
mm inches
Bi-Metal Hole Saws - Mandrels
13 - 005 514 14-30MM 1/4" ROUND
13 - 005 515 14-30MM 1/4" UNIVERSAL
13 - 005 516 32-51MM 1/4" UNIVERSAL
13 - 005 518 14-30MM 7/16" HEX
13 - 005 519 14-30MM 3/8" HEX
13 - 005 545 32-152MM 7/16"HEX QC
13 - 005 546 32-152MM 3/8-HEX QC
13 - 008 534 1/4" 5519 / 5546
13 - 008 535 1/4" 5514
E and OE
035
EDGE
EDGE
SIZE
SIZE
PRODUCT CODE
PRODUCT CODE
Bi-Metal Hole Saws
Bi-Metal Hole Saws - Mandrels
13 - 999 0076 76.0 mm
13 - 999 0079 79.0 mm
13 - 999 0083 83.0 mm
13 - 999 0086 86.0 mm
13 - 999 0089 89.0 mm
13 - 999 0092 92.0 mm
13 - 999 0095 95.0 mm
13 - 999 0098 98.0 mm
13 - 999 0102 102.0 mm
13 - 999 0108 108.0 mm
13 - 999 0111 111.0 mm
13 - 999 0114 114.0 mm
13 - 999 0121 121.0 mm
13 - 999 0127 127.0 mm
13 - 999 0140 140.0 mm
13 - 999 0146 146.0 mm
13 - 999 0152 152.0 mm
13 - 917 001 14-30MM 7/16" ROUND
13 - 917 002 14-30MM 3/8" HEX
13 - 917 003 14-30MM 7/16" HEX
13 - 917 005 32-152MM HEX 7/16" QC
13 - 917 008 32-152MM HEX 5/8" HEX
E and OE
036
BLU MOL
PILOT DRILLS
SIZE
SIZE
PRODUCTCODE
PRODUCTCODE
mm inches
Bi-Metal Hole Saws - Mandrels
13 - 005 514 14-30MM 1/4" ROUND
13 - 005 515 14-30MM 1/4" UNIVERSAL
13 - 005 516 32-51MM 1/4" UNIVERSAL
13 - 005 518 14-30MM 7/16" HEX
13 - 005 519 14-30MM 3/8" HEX
13 - 005 545 32-152MM 7/16"HEX QC
13 - 005 546 32-152MM 3/8-HEX QC
13 - 008 534 1/4" 5519 / 5546
13 - 008 535 1/4" 5514
E and OE
37
CARBON STEEL TAP SETSTru-Cut / Bulk
Tru-Cut
CODESIZE
3 x .5 901 0300
4 x .7 901 0400
5 x .8 901 0500
6 x 1.0 901 0600
8 x 1.25 901 0800
10 x 1.5 901 1000
12 x 1.75 901 1200
14 x 2.0 901 1400
16 x 2.0 901 1600
18 x 2.5 901 1800
20 x 2.5 901 2000
22 x 2.5 901 2200
24 x 3.0 901 2400
30 x 3.5 901 3000
SIZE BSW UNC UNF BSP
1/8" 903 0320 - - 907 0320
3/16" 903 0480 - - -
1/4" 903 0640 905 0640 906 0640 907 0640
5/16" 903 0790 905 0790 906 0790 -
3/8" 903 0950 905 0950 906 0950 907 0950
7/16" 903 1110 - - -
1/2" 903 1270 905 1270 906 1270 907 1270
5/8" 903 1590 905 1590 906 1590 907 1590
3/4" 903 1910 905 1910 906 1910 907 1910
7/8" 903 2220 905 2220 906 2220 907 2220
1" 903 2540 905 2540 906 2540 907 2540
1 1/4" 903 3170 - - -
E and OE
038
CARBON STEEL DIE NUTSTru-Cut / Bulk
Tru-Cut
E and OE
SIZE BSW UNC UNF BSP
1/8" 913 0320 - - 917 0320
5/32" 913 0400 - - -
3/16" 913 0480 - - -
7/32" 913 0560 - - -
1/4" 913 0640 915 0640 916 0640 917 0640
5/16" 913 0790 915 0790 916 0790 -
3/8" 913 0950 915 0950 916 0950 917 0950
7/16" 913 1110 - - -
1/2" 913 1270 915 1270 916 1270 917 1270
9/16" 913 1430 - - -
5/8" 913 1590 915 1590 916 1590 917 1590
3/4" 913 1910 915 1910 916 1910 917 1910
7/8" 913 2220 - - -
1" 913 2540 915 2540 916 2540 917 2540
CODESIZE
4 x .7 911 0400
5 x .8 911 0500
6 x 1.0 911 0600
8 x 1.25 911 0800
10 x 1.50 911 1000
12 x 1.75 911 1200
14 x 2.0 911 1400
16 x 2.0 911 1600
18 x 2.5 911 1800
20 x 2.5 911 2000
22 x 2.5 911 2200
24 x 3.0 911 2400
27 x 3.0 911 2700
30 x 3.5 911 3000
37
CARBON STEEL TAP SETSTru-Cut / Bulk
Tru-Cut
CODESIZE
3 x .5 901 0300
4 x .7 901 0400
5 x .8 901 0500
6 x 1.0 901 0600
8 x 1.25 901 0800
10 x 1.5 901 1000
12 x 1.75 901 1200
14 x 2.0 901 1400
16 x 2.0 901 1600
18 x 2.5 901 1800
20 x 2.5 901 2000
22 x 2.5 901 2200
24 x 3.0 901 2400
30 x 3.5 901 3000
SIZE BSW UNC UNF BSP
1/8" 903 0320 - - 907 0320
3/16" 903 0480 - - -
1/4" 903 0640 905 0640 906 0640 907 0640
5/16" 903 0790 905 0790 906 0790 -
3/8" 903 0950 905 0950 906 0950 907 0950
7/16" 903 1110 - - -
1/2" 903 1270 905 1270 906 1270 907 1270
5/8" 903 1590 905 1590 906 1590 907 1590
3/4" 903 1910 905 1910 906 1910 907 1910
7/8" 903 2220 905 2220 906 2220 907 2220
1" 903 2540 905 2540 906 2540 907 2540
1 1/4" 903 3170 - - -
E and OE
038
CARBON STEEL DIE NUTSTru-Cut / Bulk
Tru-Cut
E and OE
SIZE BSW UNC UNF BSP
1/8" 913 0320 - - 917 0320
5/32" 913 0400 - - -
3/16" 913 0480 - - -
7/32" 913 0560 - - -
1/4" 913 0640 915 0640 916 0640 917 0640
5/16" 913 0790 915 0790 916 0790 -
3/8" 913 0950 915 0950 916 0950 917 0950
7/16" 913 1110 - - -
1/2" 913 1270 915 1270 916 1270 917 1270
9/16" 913 1430 - - -
5/8" 913 1590 915 1590 916 1590 917 1590
3/4" 913 1910 915 1910 916 1910 917 1910
7/8" 913 2220 - - -
1" 913 2540 915 2540 916 2540 917 2540
CODESIZE
4 x .7 911 0400
5 x .8 911 0500
6 x 1.0 911 0600
8 x 1.25 911 0800
10 x 1.50 911 1000
12 x 1.75 911 1200
14 x 2.0 911 1400
16 x 2.0 911 1600
18 x 2.5 911 1800
20 x 2.5 911 2000
22 x 2.5 911 2200
24 x 3.0 911 2400
27 x 3.0 911 2700
30 x 3.5 911 3000
39
EDGEColour Coded Packaging
WOODINDUSTRIALEXTREME
INDUSTRIALSTEEL MASONRY CONCRETE DIAMOND
40
EDGEDisplay Stand & Information
Right Tool for the JobSteel bit provides quality cut into most metals. General purpose drilling of sheet metal, mild steel applications.
Masonry bit ensures easy penetration into all plaster, cement and brick. Not designed for concrete.
Concrete bit designed for concrete floors and lintels. Rotary hammer machines should be used with SDS drill bits.
Coated steel bit with a 135 split point. For industrial usage on difficult materials, i.e. stainless steel and cast iron.
Brad point and Flat bits both designed for easy penetration into most wood types without burning drill or workpiece.
Tapping4 mm - 3.5 mm5 mm - 4.5 mm6 mm - 5.25 mm8 mm - 7 mm10 mm - 9 mm12 mm - 10.5 mm
Rawl BoltM5 - 9 mmM6 - 12 mmM8 - 14 mmM10 - 16 mmM12 - 19 mmM16 - 25 mm
Eye protection to be worn at all times.
Disconnect power tool before inserting bit.
Remove chuck key after tightening the chuck.
Safety Tips
39
EDGEColour Coded Packaging
WOODINDUSTRIALEXTREME
INDUSTRIALSTEEL MASONRY CONCRETE DIAMOND
40
EDGEDisplay Stand & Information
Right Tool for the JobSteel bit provides quality cut into most metals. General purpose drilling of sheet metal, mild steel applications.
Masonry bit ensures easy penetration into all plaster, cement and brick. Not designed for concrete.
Concrete bit designed for concrete floors and lintels. Rotary hammer machines should be used with SDS drill bits.
Coated steel bit with a 135 split point. For industrial usage on difficult materials, i.e. stainless steel and cast iron.
Brad point and Flat bits both designed for easy penetration into most wood types without burning drill or workpiece.
Tapping4 mm - 3.5 mm5 mm - 4.5 mm6 mm - 5.25 mm8 mm - 7 mm10 mm - 9 mm12 mm - 10.5 mm
Rawl BoltM5 - 9 mmM6 - 12 mmM8 - 14 mmM10 - 16 mmM12 - 19 mmM16 - 25 mm
Eye protection to be worn at all times.
Disconnect power tool before inserting bit.
Remove chuck key after tightening the chuck.
Safety Tips
41
NOTES