2008 electronic catalog - molded products - dialysis ...moldedproducts.com/2008 electronic...
TRANSCRIPT
04/0
8
Item Page Number
Latex-Free Injection Sites 1
Male Female Luer Caps 1
Transducer Protector 2
Transducer Protector with Luer Extension 3
Sterile Recirculation Sets 4
Specialty Connectors 5
Sterile Blood Connectors 6-7
Double Dialyser Holder 8
Non-Sterile Specialized Dialysate Lines 9
Dialysate Line w/ Flow Restrictor 10-11
Dialysate Line Recirculation Set 12
Dialyzer Holder 13
Visor with Safety Face-Shield 14-15
Tube Occluding Forceps 16
Combination Towel Clamp 17
Fistula Pressure Clamp 18
Fistula Pressure Clamp Ultra ‘Grip Cover’ 19
Item Page Number
Dialyzer Pre-Rinse System 20
Sink System 21
Barrier Adapter with Q-Seal 22
Non-Sterile Lines 23
Kidney Storage Caps 24
1/4” Quick Disconnect 25
Medical Grade Vinyl Tubing 25
Hansen Style Female Connectors 26-27
Hansen Coupling 28
Male Hansen Connectors 29
Barbed T-Fittings 30
Dialysate Hose Clamps 30
Barb Fitting 31
Syringe Adapter 31
Dialysate Sampling Port Kit 32
Custom Injection Molding and Machining Info 33
INDEX
Dimensions:
Inlet to outlet: .9” (23mm)
Diameter: .8” (20mm)
Filtration area: 1.9cm2
Materials:
Housing: Co-Polymer
Hydrophobic Membrane: PTFE (Gore-tex)
Membrane Pore Size: 0.2µm
Line side: Standard Luer Lock
Machine side: Standard Luer Lock
Pressure Limit: 35 PSI Inlet
Characteristics: High Flow / Fast Response
Connections:
Special Features:
• Prevent blood and dialyzing fluid from damaging sensitive transducers
• Sterile, Non-Pyrogenic,
Non-Toxic • Hydrophobic Filters
Part Number
Double Luer Lock
Packaging
MPC-90 Yes Bulk Packaged
300 per box 7500 per case
MPC-90TE Yes
Tamper Evident Individually Packaged
150 per box 3300 per case
MPC-90
COMPARABLE TO: Medisystems® Part # M8-2002
TRANSDUCER PROTECTORS IN-LINE PROTECTIVE DEVICES FOR PRESSURE MONITORS ON HEMODIALYSIS EQUIPMENT
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
2
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
1
Capped injection sites can be used where medication may need to be administered or wherever a sample may need to be drawn.
MPC-100
• ISO 594/1 and 594-2
• Standard Luer Lock
• Sterile
• Self-Sealing
Also Known As:
• PRN Adapter
• 5/8” Intermittent Injection Site
• Heparin Lock
INJECTION SITE LATEX FREE 5/8” INTERMITTENT INJECTION SITE
Sterile Luer Lock Caps (male & female). Use to cap off male or female luers. These sterile caps are non-vented and do not have an access port.
Comparable To: RPC® Part # 7001-3915
Becton & Dickinson® Part # 38-1271-1 Individually Packaged
(1 pc. in 1 Pouch) 300 pcs. per box or 7,500 pcs. per case
MPC-125B MPC-125Y MPC-125
MALE FEMALE LUER CAPS ALSO KNOWN AS: DEAD END CAPS
COMPARABLE TO: RPC® Part # 7001-3926
MPC-100
Packaged: 1 blue and 1 red per
set (2 pcs. in 1 Pouch) 100 sets per bag or 5,500 sets per case
Individually Packaged 300 per box or 7,500 per case
Instructions for Use: Piggy-Back the MPC-75 indicator extension with your usual bloodline (with transducer protector) for external, visual indication of bloodline-supplied transducer protector breaches (strike-through). If your bloodline does not come equipped with transducer protectors, a sterile transducer protector must be placed between the indicator extension and the bloodline set. Immediate replacement of this product should occur if any sign of contamination (fluid or blood) is seen. Regular replacement should occur as determined by your unit administrator and unit protocols. In no event should fluid in the line be allowed to remain during treatment.
For more information on Potential Cross-Contamination Linked to
Hemodialysis Treatment you can find the FDA safety alert on the Center for
Devices and Radiological Health homepage at www.fda.gov/cdrh/safety/althin.html
TRANSDUCER PROTECTOR-LUER EXTENSION EXTERNAL VISUAL INDICATOR FOR TRANSDUCER PROTECTOR FAILURES
Special Features:
• Prevents blood contamination of the internal pressure monitoring lines.
• Prevents Cross-Contamination!
• Moves the redundant transducer protector to the outside of the machine for visual inspection.
• Gives a clear, visual indication that a Strike-Through has occurred.
• Can enhance ability to determine contamination problems.
MPC-75
Packaging
Information:
100 pieces per box
Sold with or without
date/document tag.
Machine Side
Bloodline Side
Strike Through Indicator
Fluid present
when bloodline supplied
transducer protector
has breached
MPC-75 Tag
Date / Document Tag Packaged: 25 per bag
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
3
STERILE RECIRCULATION SETS MALE TO MALE LUER ADAPTER
Special Features
• Sterile Fluid Path!
• Non-Slip Finish!
• Blood Compatible!
• End caps can be used for capping off luer lines!
• Use to connect lines or mis-matched bloodlines.
Indications for Use Extension for connecting arterial and/or venous fistula connectors to the hemodialysis blood tubing. Gender Changer / Recirculation
Set / Extension Adapter for hemodialysis blood tubing.
MPC-150 COMPARABLE TO:
RPC® Part # 7001-3902W ------
Minntech® Part # 78398-042 ------
DaySpring® Part # RC100
MPC-150 Individually Packaged
200 per box or 5,000 per case
Recirculation sets include (2) FREE end caps! When using a sterile technique the end caps can be used to cap off luer
lines during patient removal for restroom breaks, etc.
Male to Male Luer Adapter
Bulk Packaged 100 per bag or 5,000 per case
MPC-140
Female to Male Luer Adapter
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
4
Part Number MPC-855 MPC-860 MPC-865
Description DIN Adapter Male Luer Lock
Fitting to Female DIN Connector
Female Luer Lock Fitting to Male DIN
Connector
Connectors (1) Barb fitting and (1) Female
DIN Fitting
(1) Male luer lock fitting and (1) Female
DIN Fitting
(1) Female luer lock fitting and (1) Male
DIN Connector
Overall Length 1-5/8" 4.5" 4.5"
Ends Capped NO YES YES
Packaging 10 sets per bag
(2) pcs. per set or 50 sets per case
Individually Packaged 25 pcs. per bag or 50 pcs. per case
Individually Packaged 25 pcs. per bag or 50 pcs. per case
Possible Use DIN Adapter - fits 3/16" ID tubing
Recirculation Set Extension Adapter
Recirculation Set Extension Adapter
SPECIALTY CONNECTORS NO ETO RESIDUALS, FLUID PATH STERILE, BLOOD COMPATIBLE
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
5
MPC-860
MPC-855
MPC-865
Part Number Connectors Overall Length
Sampling Port Present Packaging Possible Use
MPC-850-10 (2) DIN Connectors 12.5" NO
Individually Packaged
25 per bag or 750 per case
In-Series Tandem Dialysis
STERILE BLOODLINE CONNECTORS NO ETO RESIDUALS, FLUID PATH STERILE, BLOOD COMPATIBLE
MPC-850-SP
MPC-850 and MPC-850-16
MPC-800 and MPC-800-5
MPC-875
MPC-660S
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
6
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
7
MPC-850-16 (2) DIN Connectors 16.25" NO
Individually Packaged
25 per bag or 750 per case
In-Series Tandem Dialysis
MPC-850-SP (2) DIN Connectors 12.5" YES
Individually Packaged
25 per bag or 750 per case
In-Series Tandem Dialysis
MPC-800 (2) DIN
Connectors and (1) DIN Adapter
10" NO
Individually Packaged
25 per bag or 750 per case
Parallel Tandem Dialysis
MPC-800-5 (2) DIN
Connectors and (1) DIN Adapter
11.25" NO
Individually Packaged
25 per bag or 750 per case
Parallel Tandem Dialysis
MPC-875 (1) DIN
Connector and (1) DIN Adapter
12.25" NO
Individually Packaged
25 per bag or 750 per case
Bloodline Extension
MPC-660S (2) DIN Connectors 36.5" YES
Individually Packaged
25 per bag or 400 per case
Recirculation Loop
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
8
DOUBLE DIALYZER HOLDER ADJUSTABLE FOR IN-SERIES OR PARALLEL CONFIGURATION
MPCMPC--790 Double Dialyzer Holder790 Double Dialyzer Holder
Use to position two dialyzers side by side
during Tandem Dialysis. Use for either
Parallel or In-Series configurations.
MPC-790 Double Dialyzer Holder
shown in an In-Series configuration
MPC-790 Double Dialyzer Holder
shown in a Parallel configuration
• Adjustable to fit a variety of dialyzers • Manufactured from durable materials • Friction Pads - keep dialyzers in place
Packaged Individually or 20 pcs. per case
MPC-725A-R MPC-725A-W MPC-725A-B MPC-750A
Configuration Straight Line Straight Line Straight Line "Y" Line
Components (2) Female
Hansen Connectors
(2) Female Hansen
Connectors
(2) Female Hansen
Connectors
(2) Female Hansen Connectors and (1)
Male Hansen Connector
Possible Use
Parallel Tandem Dialysis Used With:
(2) Dialyzers, (2) Sterile Bloodline
Connectors (MPC-800 or MPC-800-5)
Packaging Individually Packaged
Individually Packaged
Individually Packaged
One Set Per Package
In-Series Tandem Dialysis used with: (2) Dialyzers, (1) Sterile Bloodline
Connector (MPC-850, MPC-850-16 or MPC-850-SP).
Color Red White Blue Red/Blue
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
9
MPC-750A Set
SPECIALIZED DIALYSATE LINES CUSTOM LENGTHS AVAILABLE
Picture depicts patented products
For more information on the benefits of using Tandem Dialysis see the following studies:
www.moldedproducts.com/anna.htm
www.moldedproducts.com/dualdialyzers.htm
www.moldedproducts.com/univofvastudy.htm
MPC-725
The flow restrictor gives the physician the ability to prescribe treatment specific to the individual.
Picture depicts patented product
MPC-728
DIALYSATE LINE WITH FLOW RESTRICTOR ENABLES THE PHYSICIAN TO PRESCRIBE TREATMENT SPECIFIC TO THE INDIVIDUAL
Part Number MPC-728
Configuration Straight Line W/Flow Restrictor
Components (2) White Female Hansen Connectors and (1) Flow Restrictor
Use In-Series Tandem Dialysis
Packaging Individually Packaged
NEW!!
The flow restrictor can be used to progressively vary the flow resistance and the rate of dialysate flow through the system. The positioning of the flow restrictor should be based on the readings provided by indicators associated with the dialysis machine. The flow restrictor will remain in whatever position it is placed in by the operator.
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
10
When the flow restrictor is engaged, the dialysate flow through the restrictor provides the pressure differential for large ultrafiltration in dialyzer # 1, yielding additional convective removal of middle weight molecules. As the flow resistance of the MPC-728 is increased, the dialysate pressure in the dialysate compartment of dialyzer # 2, is at a very high rate while the dialysate pressure in the dialysate compartment of Dialyzer # 1 is at a very low rate, thus permitting an increase in fluid ultrafiltration from the blood to the dialysate in dialyzer # 1 and backfiltration of dialysate to the blood in dialyzer # 2. The quantity of fluid ultrafiltered in dialyzer # 1 is compensated for by backfiltation of dialysate into dialyzer # 2. Therefore mimicking the natural kidney. The volumetric control in the dialysis machine will ensure the balance of fluid, accounting for proper removal of fluid gained by the patient since the preceding dialysis. Since it will be possible to variably control the rate of ultrafiltration and backfiltration by adjusting the flow restrictor, it will be possible to apply this treatment to a larger number of patients with a wide range of attainable blood flows. This also provides a method for individualizing the treatment for each patients’ needs.
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
11
MPC 728
MPC-850 Series
Machine Dialysate Line (Dialysate from
machine)
When set to maximum, the flow restrictor still allows for a minimum flow path with a fixed flow resistance. This serves to prevent the triggering of machine alarms and the clotting of the blood flow circuit of the dialyzer due to excessive ultrafiltration.
D I A L
Y Z E R
# 2
D I A L Y Z E R
# 1
Bloodline to Patient
Backfiltration of dialysate to
the blood
Ultrafiltration from blood to the dialysate
Machine Dialysate Line
(Dialysate to the machine)
Volumetric Control properly ensures the quantity of dialysate entering the dialyzers is equal to that leaving the dialyzers, plus a defined quantity of excess fluid.
Dialysis Machine with Volumetric
Control
The flow restrictor of the MPC-728 enables the user to adjust the flow upon evaluating the TMP (Transmembrane Pressure) levels. As the flow restrictor is engaged it gradually reduces the flow through the tubing, thus altering the pressures which enhance ultrafiltration and convective removal of middle molecular weight solutes.
= Dialysate Flow = Blood Flow
Fluid loss that occurs through ultrafiltration in Dialyzer # 1 is
compensated for in Dialyzer # 2 by backfiltration of the dialysate to the blood.
Bloodline from Patient
DIALYSATE LINE RECIRCULATION SET SPECIALIZED DIALYSATE RINSE LINE
May be used as a recirculation connector: Connect both dialysis
machine dialysate lines together for rinsing when dialyzer is not present.
Packaged 10 per bag
or 160 per case MPC-740
MALE TO MALE HANSEN ADAPTER RELIABLE QUALITY
Special Features:
• Excellent Chemical Resistance!
• Durable!
• Cost efficient alternative to other products currently on the market.
Packaged 10 pieces per bag!
MPC-741
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
12
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
13
DIALYZER HOLDER COMPARABLE TO MOST OEM DIALYZER CLAMPS
Special Features:
• Use to easily attach dialyzer to dialysis machine.
• Attaches easily to 3/4” (18mm) to
1-1/8” (28mm) IV Pole. • Adjustable to fit a variety of dialyzers. • Stainless steel - won’t rust out. • May be cleaned with soap and water or a
disinfectant approved for use by your unit’s protocols.
• Can be easily sanitized using your unit’s
disinfectant protocols.
MPC-1400 Dialyzer Holder
Our visors and face-shields are also available in a combo pack. Each combo pack includes three reusable visors (your choice of red, white or blue) and 10 ( 6” or 7” ) disposable face-shields.
SAFETY FACE-SHIELD ANTI-GLARE AND ANTI-FOG
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
14
04/0
8
Our reusable visors are comfortable,
lightweight, and fit a variety of head sizes.
COMPARABLE TO:
Op-d-op® Part # 100-3282
Visor Available in Red, White or Blue
• Latex-Free
• Lightweight
• Comfortable
• Shields are easy on and easy off
• Visor fits snuggly to a variety of head sizes without discomfort.
• Replacement face-shields can be purchased separately, so you only pay for what you need.
Part Number Strap Description Packaging
MPC-300 Set Elastic Strap 1 Visor (red, white or blue),
1 clear 6” disposable face-shield and 1 clear 7” disposable face-shield
Set
MPC-300 CP6 Elastic Strap 3 Visors (red, white or blue) and 10 clear 6” disposable face-shields Combo Pack
MPC-300 CP7 Elastic Strap 3 Visors (red, white or blue) and 10 clear 7” disposable face-shields Combo Pack
MPC-301 Set No Strap 1 Visor (red, white or blue),
1 clear 6” disposable face-shield and 1 clear 7” disposable face-shield
Set
MPC-301 CP6 No Strap 3 Visors (red, white or blue) and 10 clear 6” disposable face-shields Combo Pack
MPC-301 CP7 No Strap 3 Visors (red, white or blue) and 10 clear 7” disposable face-shields Combo Pack
MPC-302 Set Adjustable Strap
1 Visor (red, white or blue), 1 clear 6” disposable face-shield and
1 clear 7” disposable face-shield Set
MPC-302 CP6 Adjustable Strap
3 Visors (red, white or blue) and 10 clear 6” disposable face-shields Combo Pack
MPC-302 CP7 Adjustable Strap
3 Visors (red, white or blue) and 10 clear 7” disposable face-shields Combo Pack
MPC-310 N/A Clear 6” Disposable Replacement Face-shields 10 per bag
MPC-320 N/A Clear 7” Disposable Replacement Face-shields 10 per bag
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
15
MPCMPC--301301 No StrapNo Strap
MPCMPC--302 Adjustable Strap302 Adjustable Strap
MPCMPC--300300 Elastic StrapElastic Strap
Patented No Fog
Anti-Glare Shield
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
16
Equipped with a deep grooved superior maxi-lock system that will not come off the line unless you take it off. This exclusive maxi-lock system ensures you a secure
and durable hold every time!
Part Number MPC-200 MPC-225
Length 11.3 cm (4.4375 in.)
12.4 cm (4.875 in.)
Finger Hole Diameter
2.5 cm (1.00 in.)
2.858 cm (1.125 in.)
Packaging 100 per bag or 1,600 per case
100 per bag or 1,000 per case
Comparable to:
RPC® Part # 7001-3950 Baxter® Part # 5K3739
Kendall® Part # 31140315 Dravon® Part # A-110
MPC-200 Available in
Blue and Yellow
MPC-225 Available in
Blue, Red, or White
• Holds Color - Will Not “Chalk-Out”.
• Easy to Use!
• Lightweight!
• Comfortable oval finger holes accommodate gloved hands.
• Smooth jaws won’t damage occluded tubing.
• Jaws remain aligned when tubing is occluded.
• Safe & Effective!
DISPOSABLE TUBE OCCLUDING FORCEPS SUPERIOR MAXI-LOCK SYSTEM
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
17
Superior Maxi-Lock System: Our combination towel clamp and tube occluding forceps are equipped with a superior maxi-lock system which will not come off unless you take it off. This exclusive maxi-lock system ensures you a secure and durable hold every time.
Special Feature: Our MPC-275 is the most versatile combination towel clamp / tube occluding forceps available on the market today. In addition to securing drapes, bedding, towels, sponges, and other materials gathered around tubes and leads, the MPC-275 can be used to occlude tubing. This combination makes the MPC-275 extremely useful and cost efficient.
MPC-275
Packaged 100 pieces per bag or 1,000 pieces per case.
COMBINATION TOWEL CLAMP SECURES DRAPES, TOWELS, SPONGES AND ALSO OCCLUDES TUBING
Super Grip: The jaws on our MPC-275 have a distinctive offset grooved surface, which ensures super gripping action.
• Heavy Duty! • Reliable! • Easy to Use!
• Exclusive Maxi-Lock System means it won’t come off unless you take it off!
• In addition to being a towel clamp the MPC-275 totally occludes tubing from monitor lines to pump segments.
• Large, comfortable finger holes!
MPC-250
Packaged 10 pieces per bag or 300 per case
FISTULA PRESSURE CLAMP ADJUSTABLE TO FIT MOST SIZE ARMS
• Constructed of Durable Plastic!
• Stainless steel spring - won’t rust out!
• Comfortable!
• Lightweight!
• Safe & Effective!
• Reliable!
• Designed to cradle patient’s arm, without pinching.
• Easy to Use!
• Arms remain aligned when applying pressure.
• Smooth surfaces won’t damage or pull patient’s skin.
• Can be easily sanitized using your unit’s disinfectant protocols.
• May be cleaned with soap and water or a disinfectant approved for use by your unit’s protocols.
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
18
Molded Products’ MPC-250 Fistula Pressure Clamp pictured with the ‘Ultra Grip’ cover in place.
Administers 1.0-1.5 lbs of pressure
COMPARABLE TO:
RPC® Part # 7001-3955 Minntech® Part # 78398-044
DaySpring® Part# FCD1
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
19
Part Number: MPC-255
Description Fistula Pressure Clamp ‘Ultra Grip’ Cover
Compatibility: Used in conjunction with gauze or a Super Stopper®
Packaged: 25 per bag or 300 per case
One Step Assembly!
Just slip the ‘Ultra Grip’ cover over the pressure pad of the fistula pressure clamp and it’s ready to use!
Note: This product has only been tested to be used in conjunction with the Molded Products’ Mid-America
Brand MPC-250 Fistula Pressure Clamp. This product is not recommended for use with fistula pressure
clamps not manufactured by Molded Products, Inc. The MPC-255 is manufactured with
Medical Grade Materials resistant to Renalyn,
Formaldehyde, Alcohol, Betadine and Chlorine.
The ’Ultra Grip’ is compatible with:
3% Hydrogen Peroxide, 4% Formaldehyde, 0.05% Sodium Hypochlorite, 0.8% Diacide
(Glutaraldehyde), 4% Renalin (Peroxyacetic Acid)
Special Features:
• Comfortable!
• Safe & Effective!
• Easy to Use!
• Can be easily sanitized using your unit’s disinfectant protocols.
• Gives you the flexibility you need in access care.
The ‘Ultra Grip’ is a flexible cover designed to be applied to our Fistula Pressure Clamp. When used in conjunction with our Fistula Clamp the ‘Ultra Grip’ is an excellent solution in alleviating slide-off issues that occur when using a fistula
clamp /gauze or a fistula clamp /Super Stopper® combination.
NNEWEW!!!!!!
MPC-255 The ‘Ultra Grip’ is an excellent solution when using a fistula
pressure clamp/Super Stopper® combination.
FISTULA PRESSURE CLAMP ‘ULTRA GRIP’ COVER ONE STEP ASSEMBLY
Barrier Adapter w/ Q-Seal
MPC
-670
Dia
lyze
r Pr
e-R
inse
Sys
tem
Barrier Adapter
with Q-Seal
Dialyzer Pre-Rinse Drain Line with Colder® Fitting (Part# APC17004)
Dialysate Port to Blood Port
Circulation Line with Adjustable Pulse Control
RO Water Line
Colder® Fitting (Part# APC17004)
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
20
DIALYZER PRE-RINSE SYSTEM QUICKLY PRE-CLEANS DIALYZERS USING TRANS-MEMBRANE VARIABLE PRESSURE-PULSES
Always use clean, sanitized barrier adapters to eliminate the potential of contamination from dialyzer to dialyzer.
Special Features:
• Clean Line - Stays Clean!
• Reduction in Chemical Expenses!
• Reduction in Capital Expenses! No Expensive machines to purchase or to maintain.
• Easy, time saving, cost efficient alternative to expensive machines and methods currently available.
System Includes: ⇒ (1) RO Water Line ⇒ (1) Dialyzer Pre-Rinse Drain Line ⇒ (1) Dialysate Port to Blood Port Circulation
Line with adjustable pulse control ⇒ (50) Barrier Adapters with Q-Seal
SINK SYSTEM GREAT FOR DIALYSER REPROCESSING
SINK SYSTEM INCLUDES:
Item Back Panel Shelf Small Pan
Tray Large Pan
Tray Small Pan
Large Pan
3rd Hand
Threaded Buttons
Quantity 3 1 1 1 2 1 1 4
Dimension 20” x 12” 18” x 7-5/8” 18” x 7-5/8” 18” x 7-5/8” 4-1/2” x 4-1/2” x 4” 15” x 4-1/2” x 4” 6” x 4” 1/4-20
BACK PANEL LARGE PAN
SMALL PAN TRAY
SMALL PAN
SHELF
3RD HAND
TROUBLE-FREE CLEAN UP! EASILY DISASSEMBLES FOR CLEANING IN THE SINK!
MPC-1190
System easily disassembles for trouble free clean-up!
• Back Panels attach to wall
• Trays and shelves attach to back panels
• Pans are easily inserted and removed from trays
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
21 ** Cabinet Bases and Stainless Steel Sinks Sold Separately, Please contact us for more information **
LARGE PAN TRAY
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
22
BARRIER ADAPTER WITH Q-SEAL EASILY CONNECT AND DISCONNECT
THEIRS OURS
• Contaminants are notorious for becoming trapped under O-rings. • No O-ring for contaminants to hide under!
• O-ring generated seal. Requires removal and replacement for disinfection. • Built in Q-Seal. No removal, no replacement,
no worry!
• Manufactured with PVC Material. (PVC material is known to contain DEHP and Phthalates)
• Manufactured from a Patented Medical Grade Material that is Latex Free, DEHP Free, PVC Free, and Phthalate Free!
-- LatexLatex--FreeFree -- PVC FreePVC Free
-- DEHP FreeDEHP Free -- Phthalate FreePhthalate Free
Colder® Fitting (Part# APC17004)
Packaged 50 pieces per bag or 200 per case
Comparable to Minntech® Part # 78397-699
Guidelines to Optimal Performance
Step 1: Twist the DIN end of the MPC-700 into the blood port of the Dialyser.
Step 2: Push the Colder® fitting end of the MPC-700 into the Renatron® machine connection.
That’s it! The MPC-700 is a very easy to use, cost efficient alternative to other products on the market. The Barrier Adapter with Q-Seal helps ensure patient safety from cross-contamination during reprocessing. This system easily connects and disconnects, which means no more fumbling with extra pieces and extensions.
MPC-700
MPC-700
NON-STERILE LINES MANUFACTURED WITH MEDICAL GRADE CLASS VI TUBING, DEHP FREE
MPC-825
MPC-742
MPC-671
MPC-875NS
MPC-665
Part Number Description Connectors Tubing ID Length Packaging
MPC-665 Drain Line (1) DIN Connector 3/16” 25.0” 25 per bag or 400 per case
MPC-671 Dialysate Port to Blood Port Circulation Line with Adjustable Pulse Control
(1) Female Hansen Connector (1) Quick Disconnect 3/16” 26.25" Sold Individually
or 20 per case
MPC-742 Male Hansen Connector to Female Quick Disconnect Adapter
(1) Quick Disconnect (1) Male Hansen Connector 1/4” 4.75" 10 per bag or
160 per case
MPC-825 Male to Male Recirculation Connector (2) DIN Adapters 3/16” 4.5" 25 per bag or
150 per case
MPC-875NS Non-Sterile DIN to Male DIN Connector (1) DIN Connector and (1) DIN Adapter 3/16” 12.25" 25 per bag or
400 per case
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
23
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
24
Molded Products disposable storage caps were designed with your patients safety in mind. In order to ensure contaminant-free storage of your dialyzers,
our storage caps are: Latex Free, DEHP Free, PVC Free, and Phthalate Free.
Part No: Description Style Vented Comparable To: Packaging Bag / Case
MPC-40 Blood Port Cap Twist On No Minntech® Part #78397-704 and 78398-366 200 / 10,000 MPC-50DV Dialysate Port Cap Push On Yes N/A 200 / 4,000
MPC-55 Blood Port Cap Twist On No RPC® Part # 7001-0001 and Minntech® Part # 78197-010 1,000 / 16,000
MPC-60B Blood Port Cap Push On No N/A 200 / 20,000
MPC-60D Dialysate Port Cap Push On No N/A 200 / 4,000
MPC-65 Dialysate Port Cap Push On No RPC® Part # 7000-003 and Minntech® Part # 78196-050 200 / 4,000
MPC-65V Dialysate Port Cap Push On Yes RPC® Part # 7000-0005 and Minntech® Part # 78398-367 200 / 4,000
KIDNEY STORAGE CAPS LATEX FREE, DEHP FREE, PVC FREE AND PHTHALATE FREE
Automatic Venting… simply install caps
and store in an upright position
These caps are compatible with: 3% Hydrogen Peroxide, 4% Formaldehyde, 0.05% Sodium Hypochlorite, 0.8% Diacide (Glutaraldehyde), 4% Renalin
(Peroxyacetic Acid)
MPC-55 Blood Port Caps and MPC-65V Vented Dialysate Port Caps shown.
Automatic Venting … Automatic Venting … simply install caps and store simply install caps and store
in an upright position, as shown.in an upright position, as shown.
Storage Caps are made of Medical Grade
Materials resistant to Renalyn, Formaldehyde,
Alcohol, Betadine & Chlorine.
MPC-40 MPC-55 MPC-65 MPC-65V
MPC-60B MPC-60D MPC-50DV
Features:
⇒ Tubing size: 1/4" ID
⇒ Pressure: Vacuum to 120 psi, 8.3 bar
⇒ Temperature: -40°F to 180°F continuous -40°C to 82°C continuous
Packaged 10 pieces per bag.
MPC-35
Colder® Fitting (Part# APC17004)
1/4" QUICK DISCONNECT EASILY CONNECT AND DISCONNECT
HEAVY WALL VINYL MEDICAL GRADE TUBING CLASS VI MEDICAL GRADE
Part Number ID OD Wall
MPC-730-T .375 .625 .125
MPC-731-T .250 .437 .094
MPC-732-T .180 .260 .040
Available in rolls of up to 100 ft.
Special Features:
• Custom Lengths Conveniently Available!
• Class VI Medical Grade MPC-730-T
MPC-731-T
MPC-732-T
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
25
FEMALE HANSEN CONNECTORS AVAILABLE IN RED, WHITE OR BLUE
MPC-761 Series MPC-762 and MPC-763 Series
MPC-764 MPC-766 Series
MPC-767 Series
SNAP TO LOCK
Snap-On Female Hansen
Style Connectors
Part Number Configuration Size Packaged
MPC-761 Barbed Fits 3/8" ID Tubing 10 per Bag
MPC-762 Angled Barb Fits 1/4" ID Tubing 10 per Bag
MPC-763 Angled Barb Fits 3/8" ID Tubing 10 per Bag
MPC-764 Straight Glue - On Fits 1/4" OD Tubing 10 per Bag
MPC-766 Straight Glue - On Fits 7/16" OD Tubing 10 per Bag
MPC-767 Available in White Only
Dead End - Comparable to Minntech® 78398-723 N/A 10 per Bag
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
26
HIGH-TEMP FEMALE HANSEN CONNECTORS FOR USE WITH MACHINES USING HEAT STERILIZATION, INCLUDING FRESENIUS® AND AKSYS®
MPC-771 and MPC-772 Series
MPC-773 and MPC-774 Series
MPC-776 and MPC-777 Series MPC-779
AVAILABLE IN RED, WHITE OR BLUE
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
27
High Temp Kynar (PVDF)
Hansen Connectors
MPC-771 Barbed Fits 1/4" ID Tubing 10 per Bag
MPC-772 Barbed Fits 5/16" ID Tubing 10 per Bag
MPC-773 Angled Barb Fits 1/4" ID Tubing 10 per Bag
MPC-774 Angled Barb Fits 5/16" ID Tubing 10 per Bag
MPC-776 Threaded 3/8-18 NPTF 10 per Bag
MPC-777 Threaded 1/4-18 NPTF 10 per Bag
MPC-779 Threaded (Internal) 1/2-14 NPTF 10 per Bag
Part Number Configuration Size Packaged
Socket Body Sleeve Back-Up Ring Plug Body
Valve Locking Balls O-Ring
Valve Sleeve Spring
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
28
Part Number
Thread Size
A B C D E Hex
MPC-786 1/4-18 NPTF - - 1.65 1.01 0.67 0.88
MPC-787 1/4-18 NPTF 2.38 1.45 - - - 0.88
Intended for use with air, water and various chemicals at low pressure. The Hansen Coupling is designed for use where an economical, light weight, corrosion resistant coupling is desired. All components except springs and seals are natural polypropylene. Valve springs are 316
Stainless steel and seals are Viton.
HANSEN COUPLING ECONOMICAL, LIGHTWEIGHT AND CORROSION RESISTANT
Packaged 10 pieces per bag
MPC-787
Socket
MPC-786
Plug
MALE HANSEN CONNECTORS EASY TO USE AND RELIABLE QUALITY
Temperature* PSI BAR
75° 110 8
200° 30 2
*235°F maximum sterilization temperature
Rated Pressure
Dimensions Part Number MPC-769 MPC-770 MPC-780 MPC-785
Material PVDF Polypropylene Polypropylene Polypropylene
Configuration Fits 1/4” ID Tubing Fits 3/8” ID Tubing 3/8-18 NPTF 1/4-18 NPTF
C 2.08 2.12 1.70 1.70 D 0.79 0.79 0.79 0.79
Hex 0.68 0.68 0.68 0.68
MPC-770
MPC-780 - - -
MPC-785
MPC-769
• MPC-769/MPC-770: Single Barbed fittings minimize leaks by having a smoother sealing surface than multi-barbed fittings.
• MPC-769: For use with all machines using heat
sterilization. Maximum Sterilization temperature 282oF.
Lightweight! Low Cost! Excellent Chemical
Resistance! Packaged 10 pieces per bag
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
29
DIALYSATE HOSE CLAMPS INSTALLS IN SECONDS
MPC-735 Special Features:
• Easy to Apply! Installs in seconds. • Lightweight! • Won’t cut into hose or tubing.
• Resistant to most chemicals.
• Temperature range is –25° to +275°F.
Packaged 10 pieces per bag
Special Features:
• Single-barbed fittings minimize leaks by having a smoother sealing surface than multi-barbed fittings.
• Excellent Chemical Resistance!
• Temperature range is 36° to 175°F.
Packaged 10 pieces per bag
MPC-765
Fits 3/8” ID Tubing
Details: Range: 19/32” - 21/32”
Band Width: 0.22” Band Thickness: 0.07” Packaged 10 per bag
Max Pressure: 125 PSI at 70OF
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
30
BARBED T-FITTINGS SMOOTH SEALING SURFACE
Special Features:
• Reduce contamination by flushing out machine fittings and lines per unit protocols.
• Semi-Transparent fluid path allows easy viewing.
• Compatible with most syringes!
• Gender Changer - Male to Female!
• Excellent Chemical Resistance!
BARB FITTING CONNECTS TUBING TO TUBING
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
31
MPC-775 Special Features:
• Repair split or cut tubing!
• Fits 3/16" ID
• Excellent Chemical Resistance!
SYRINGE ADAPTER FLUSH OUT MACHINE FITTINGS AND LINES
Packaged 50 pieces per bag or 800 per case
MPC-145
Packaged 100 pieces per bag.
Leak Free ! Trouble Free!Leak Free ! Trouble Free!
Use our self-sealing Dialysate Sampling Port Kit within the dialysate fluid pathway of your dialysis machine for a fast, safe,
and reliable means of drawing your dialysate test samples! Compatible with all standard dialysis germicides.
Instructions for Use: 1.
1. Place Barbed T-Fitting Luer Connector into dialysate line in which samples are to be drawn.
2. Twist access site onto the luer connector of the Barbed T-Fitting inserted into line; turn clockwise to form a secure connection. 1.
3. Sanitize access site using your approved unit protocols regarding injection site preparation.
4.
4. Attach lever lock cannula to syringe.
5. Push the syringe cannula into the access site and advance.
6. Extract desired amount of sample and withdraw the cannula. The access site will seal automatically.
MPC-180 Kit Includes:
• (2) Sterile Access Sites
• (1) Barbed T-Fitting Luer Connector
• (2) Lever Lock Cannulas
DIALYSATE SAMPLING PORT KIT USE TO DRAW A DIALYSATE TEST SAMPLE
Low Cost Replacement PartsLow Cost Replacement Parts
• MPC-181 Replacement Needle-Less Access Sites • MPC-182 Replacement Lever Lock Cannulas • MPC-183 (3 ml) Luer Lock 2-Piece Syringe
MPCMPC--180180 Lever Lock Cannula
Access Site
Barbed T-Fitting Luer Connector
IN OUT
Fits 3/8” ID Tubing
Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com
32 Regular replacement of access site should
occur per your approved unit protocols.
Molded Products specializes in producing quality products for the medical, commercial, and industrial fields. Located in Southwest Iowa, Molded Products is close to transit routes enabling quick delivery times to all parts of the world. We maintain a complete tooling facility for moldmaking, machining and 24 hour a day injection molding.
Design…By utilizing state of the art technology for design, we have the ability to develop the product not only from a print but also from a model or sample. This technique allows for design flexibility, elimination of costly errors, and a reduction in time to market.
We are committed to high-quality products, affordable pricing, and on time delivery.
Production… Molded Products is a leading manufacturer of high-quality injection molded products. We utilize various sizes of injection molding machines as well as an excellent group of experienced toolmakers. When the 21-injection molding machines are at full production, they can produce up to 50 million parts a month.
Inspection… In-process and final inspections are conducted on each product lot manufactured. This constant attention to quality control further ensures that the customer's requirements are continually being met and adhered to.
Molded Products, Inc. Custom Injection Molding, Moldmaking & Machining
1112 Chatburn Avenue Harlan, IA 51537
JANUARY 2008 FEBRUARY 2008 MARCH 2008 Su M Tu W Th F Sa Su M Tu W Th F Sa Su M Tu W Th F Sa Su M Tu W Th F Sa
1 2 3 4 5 1 2 1 1 2 3 4 5
6 7 8 9 10 11 12 3 4 5 6 7 8 9 2 3 4 5 6 7 8 6 7 8 9 10 11 12
13 14 15 16 17 18 19 10 11 12 13 14 15 16 9 10 11 12 13 14 15 13 14 15 16 17 18 19
20 21 22 23 24 25 26 17 18 19 20 21 22 23 16 17 18 19 20 21 22 20 21 22 23 24 25 26
27 28 29 30 31 24 25 26 27 28 29 23 / 30
24 / 31 25 26 27 28 29 27 28 29 30
APRIL 2008
MAY 2008 JULY 2008 AUGUST 2008
Su M Tu W Th F Sa Su M Tu W Th F Sa Su M Tu W Th F Sa Su M Tu W Th F Sa
1 2 3 1 2 3 4 5 6 7 1 2 3 4 5 1 2
4 5 6 7 8 9 10 8 9 10 11 12 13 14 6 7 8 9 10 11 12 3 4 5 6 7 8 9
11 12 13 14 15 16 17 15 16 17 18 19 20 21 13 14 15 16 17 18 19 10 11 12 13 14 15 16
18 19 20 21 22 23 24 22 23 24 25 26 27 28 20 21 22 23 24 25 26 17 18 19 20 21 22 23
25 26 27 28 29 30 31 29 30 27 28 29 30 31 24 / 31 25 26 27 28 29 30
JUNE 2008
OCTOBER 2008 NOVEMBER 2008 DECEMBER 2008
Su M Tu W Th F Sa Su M Tu W Th F Sa Su M Tu W Th F Sa Su M Tu W Th F Sa
1 2 3 4 5 6 1 2 3 4 1 1 2 3 4 5 6
7 8 9 10 11 12 13 5 6 7 8 9 10 11 2 3 4 5 6 7 8 7 8 9 10 11 12 13
14 15 16 17 18 19 20 12 13 14 15 16 17 18 9 10 11 12 13 14 15 14 15 16 17 18 19 20
21 22 23 24 25 26 27 19 20 21 22 23 24 25 16 17 18 19 20 21 22 21 22 23 24 25 26 27
28 29 30 26 27 28 29 30 31 23 / 30 24 25 26 27 28 29 28 29 30 31
SEPTEMBER 2008