2007 / 2008 - hydra-flexansi/asme b1.20.3 ansi/asme b1.1 nptf threads nptf pre-coated threads unf...
TRANSCRIPT
2007 / 2008
Technical Catalogue
CONTROL - QUALITY - FLEXIBILITY - SAFETY
C.MATIC was founded as a pneumatic fitting and spe-cial component manufacturer after a long term expe-rience as a subcontractor of high precision metalparts.Years of expansion led to a radical change in the origi-nal craftsman workshop activity. The workshop turnedinto a company whose main objective is to project,develop and manufacture a line of pneumatic fittings.
C.MATIC’s philosophy pivots on the extreme sensitivityto the ever changing market requirements , the focuson new materials and the development of new pro-ducts.Deep- rooted Quality awareness is the reasonC.MATIC achieved the Quality Assurance Systemsaccording to the ISO 9001 in early 1994. In 2003C.MATIC updated the Quality Management System tothe ISO 9001:2000 Standards, more commonly knownas VISION 2000.
Top Quality together with a high company flexibilitymake of C.MATIC the right business partner to workwith.
Today C.MATIC can boast a very wide range of fittingscovering every possible requirement.
Our sales programme offers different fitting lines ran-ging from push to connect brass nickel-plated, acetal,stainless steel 316 fittings, to push to connect fittingsfor grease installations, one touch and olive fittings,function fittings, valves, flow controls, quick couplersand multiple-couplers.
americano cmatic 31-05-2007 9:42 Pagina 1
SUBSTANCE FITTINGS SEALS TUBINGS
BRASS POM INOXAISI316L
NBR FPM EPDM PA 11/12 LDPE PU P.T.F.E
Acetic Acid (5%)Acetic Acid (20%)Acetic Acid (50%)AcetoneAcetyleneAmmonia (10%)AnilineBenzeneBrake FluidButaneCalcium Chloride (10%)Carbon DioxideCarbon MonoxideChlorine GasChloroformChromic Acid (10%)Citric AcidCyclohexaneD.D.T.DetergentsDiesel FuelEthyl Alcohol (Ethanol)Ethyl EtherEthylene glycolFood Oils (vegetable)Formaldehyde (37%)Formic AcidFreon 12Freon 22Fruit JuiceFuel OilGasolineGlucoseHeptaneHexaneHydrochloric Acid (10%)Hydrofluoric Acid (10%)Hydrogen Peroxide (1%)Hydrogen Peroxide (30%)Hydrogen SulfideIsooctaneJet Fuel/KeroseneLubricating OilMethyl Alcohol (Methanol) Methyl ChlorideMethyl Ethyl KetoneMethylene ChlorideMineral OilMotor OilNitric Acid (10%)NitrogenNitrous AcidNitrous OxideOleic AcidOxigen (Cold)OzonePalmitic AcidParaffinPerchloric Acid (10%)Phosphoric Acid (30%)Propane (liquefied)Sea WaterSodium Chloride (10%)Sodium Hydroxide (10%) - Caustic SodaSodium Hypochlorite (5%)Sulfur DioxideSulfuric Acid (30%)Sulfurous AcidToulene (Toulol)Trichloroacetic AcidTrichloroethaneTurpentineUrea (5%)VinegarWater (Cold)Wine
CHEMICAL COMPATIBILITY CHART
2
americano cmatic 31-05-2007 9:42 Pagina 2
Very Good Good Limited resistence Not recommended Information not available
Pa
6894.75729
1
1000
1000000
100000
100
101325
133.3224
kPa
6.89476
.001
1
1000
100
.1
101.325
.13332
MPa
.00689
.000001
.001
1
.1
.0001
.10133
.00013
mbar
68.9476
.01
10
10000
1000
1
1013.25
1.3332
atm
.06805
.0000099
.00987
9.86923
.98692
.0009869
1
.00132
mmHg
51.71492
.0075
7.50062
7500.61505
750.06151
.75006
759.99982
1
Conversion chart for Pressure Unit
Conversion of temperature units
1 in =
1 ft =
1 m =
1 mm =
in
1
12
39.37008
.03937
ft
.08333
1
3.28084
.00328
m
.0254
.3048
1
.001
K = °C + 273.15
°F = (°C *9/5) + 32
°C = (°F - 32) *5/9
mm
25.4
304.8
1000
1
1 psi =
1 Pa =
1 kPa =
1 Mpa =
1 bar =
1 mbar =
1 atm =
1 mmHg =
psi
1
.000145
.14504
145.03774
14.50377
.0145
14.69595
.01934
bar
.06895
.00001
.01
10
1
.001
1.01325
.00133
The information given on this chart have to be used as a guide only and the actual materials’ reaction has to be tested in the real working conditionsas temperature, pressure and different concentrations can affect the mentioned chemical compatibility.
Conversion chart for Length Unit
3
LEGEND
americano cmatic 31-05-2007 9:42 Pagina 3
INDamericano cmatic 31-05-2007 9:42 Pagina 4
PNLI
NE
PXLI
NE
PA L
INE
&TU
BIN
GS
PULI
NE
PVLI
NE
INDEX
7_18
19_24
25_28
29_34
35_46
PN Line
PX Line
PA Line
PU Line
PV Line
Brass Push-in fittings
Stainless Steel Push-in fittings
Brass Standard fittings and Flexible Hoses
Couplings and Multiple Connectors
Function fittings
americano cmatic 31-05-2007 9:43 Pagina 5
PN LINE
10_13
13_15
15_17
PN 11PN 13PN 14PN 15PN 17PN 18PN 20PN 23
Technical remarks
PN 25PN 26PN 27PN 28PN 29PN 31PN 32PN 35
PN 37PN 38PN 39PN 40PN 43PN 48
8_9
PNLI
NE
PN 13PN 11 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23
PN 25 PN 26 PN 27 PN 28 PN 29 PN 31 PN 32 PN 35
PN 38PN 37 PN 39 PN 40 PN 43 PN 48
7
americano cmatic 31-05-2007 9:44 Pagina 7
61 - 2 3 4 5 6
Body and Release Ring Tightness Ring Gripping collet Protection Ring O-Ring
Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N Nickel Plated Acetal Resin (POM) Stainless steel AISI 301 Acetal Resin (POM) NBR(FPM on request)
2
6
5
1
THE PN LINE
PN is C.MATIC highly performing, extreme-ly compact push-in full metal fitting.Our PN fittings are ready for use as allthreads are PTFE pre-applied and no toolsare requested to guarantee tight and pres-sure resistant assemblies. The hose connection is made possible bythe presence of a stainless steel gripperand by an O-ring inside of the fitting. Toconnect, simply push the tubing until itbottoms; the stainless steel teeth grip ontothe tubing and holds it captive.The great advantage of our special PTFEcoating on threads makes sure that the fit-ting can be used several times withoutpeeling off.It is a full metal fitting and this makes of itthe suitable fitting for the heaviest dutypneumatic applications.
DATA SHEET
Recommended tubings:PA 6, PA 11, PA 12, Polyethylene,Polyurethane (95 durometer or above)Acceptable tubing tolerances:
+/- .003
Application fields:Pneumatic circuits.Working pressure:Depending on tubings used and alwayswithin: 0 psi ÷ 217 psiVacuum rating: to 28” HgWorking temperature:-4 °F ÷ 160°F
4
3
PN LINE
Identification mark for inch sizes. Identification mark for NPTF threads.
ZOOM IN
All our NPT threads are PTFE pre-applied.
8
americano cmatic 31-05-2007 9:44 Pagina 8
1 2 3
ASSEMBLY INSTRUCTIONS
1. Cut the tube square (by means of a tube cutter i.e. our PA 34) making sure that no burrs are left and that the tube is not oval.
2. Push the tubing until it bottoms.
Tube release
3. While pressing on the release ring, pull out the tube from the fitting.
PNLI
NE
Our tapered male straight connec-tor is provided with an inner hexallowing for easy assembly whenno space is available.
Threads SpecificationsThreads Tightening Torque (lb-ft)
10-32 1/8" 3/8" 1/2"
7.376 ÷ 8.8513.688 ÷ 4.425
1/4"
10.326 ÷ 11.8015.901 ÷ 7.376
11.801 ÷ 13.2767.376 ÷ 8.851
13.276 ÷ 14.75111.801 ÷ 13.276
ANSI/ASME B1.20.3ANSI/ASME B1.20.3ANSI/ASME B1.1
NPTF threadsNPTF pre-coated threadsUNF parallel threads with seal 0.738 ÷ 1.106
9
americano cmatic 31-05-2007 9:44 Pagina 9
PN 11
Male Connector
PartNumber Tube OD D1 UNF D2 L1 L2 HEX1 HEX2 oz
11 1/8 10-32 1/8 10-32 .275 .196 .649 5/16 3/32 .088( 7 ) ( 5 ) ( 16.5 ) ( 7.93 ) ( 2.38 ) ( 2.5 )
11 5/32 10-32 5/32 10-32 .354 .196 .767 3/8 3/32 .176( 9 ) ( 5 ) ( 19.5 ) ( 9.52 ) ( 2.38 ) ( 5 )
11 1/4 10-32 1/4 10-32 .472 .196 .905 1/2 3/32 .300( 12 ) ( 5 ) ( 23 ) ( 12.7 ) ( 2.38 ) ( 8.5 )
PartNumber Tube OD D1 NPTF D2 L1 L2 HEX1 HEX2 oz
ozPartNumber Tube OD D1 NPTF D2 L1 L2 HEX
11 1/8 1/8 1/8 1/8 .275 .334 .728 7/16 3/32 .335( 7 ) ( 8.5 ) ( 18.5 ) ( 11.1 ) ( 2.38 ) ( 9.5 )
11 5/32 1/8 5/32 1/8 .354 .334 .748 7/16 1/8 .317( 9 ) ( 8.5 ) ( 19 ) ( 11.11 ) ( 3.17 ) ( 9 )
11 5/32 1/4 5/32 1/4 .354 .511 .925 9/16 1/8 .705( 9 ) ( 13 ) ( 23.5 ) ( 14.28 ) ( 3.17 ) ( 20 )
11 1/4 1/8 1/4 1/8 .472 .334 .846 1/2 5/32 .353( 12 ) ( 8.5 ) ( 21.5 ) ( 12.7 ) ( 4 ) ( 10 )
11 1/4 1/4 1/4 1/4 .472 .511 .944 9/16 5/32 .617( 12 ) ( 13 ) ( 24 ) ( 14.28 ) ( 4 ) ( 18 )
11 5/16 1/8 5/16 1/8 .551 .334 1.023 9/16 1/4 .529( 14 ) ( 8.5 ) ( 26 ) ( 14.28 ) ( 6.35 ) ( 15 )
11 5/16 1/4 5/16 1/4 .551 .511 .984 9/16 1/4 .564( 14 ) ( 13 ) ( 25 ) ( 14.28 ) ( 6.35 ) ( 16 )
11 5/16 3/8 5/16 3/8 .551 .511 .964 11/16 1/4 .987( 14 ) ( 13 ) ( 24.5 ) ( 17.46 ) ( 6.35 ) ( 28 )
11 3/8 1/8 3/8 1/8 .629 .334 1.082 11/16 1/4 .794( 16 ) ( 8.5 ) ( 27.5 ) ( 17.46 ) ( 6.35 ) ( 22.5 )
11 3/8 1/4 3/8 1/4 .629 .511 1.220 11/16 5/16 .952( 16 ) ( 13 ) ( 31 ) ( 17.46 ) ( 8 ) ( 27 )
11 3/8 3/8 3/8 3/8 .629 .511 .964 11/16 5/16 .882( 16 ) ( 13 ) ( 24.5 ) ( 17.46 ) ( 8 ) ( 25 )
11 3/8 1/2 3/8 1/2 .629 .669 1.161 7/8 5/16 1.975( 16 ) ( 17 ) ( 29.5 ) ( 22.22 ) ( 8 ) ( 56 )
11 1/2 1/4 1/2 1/4 .748 .511 1.299 13/16 5/16 1.129( 19 ) ( 13 ) ( 33 ) ( 20.63 ) ( 8 ) ( 35 )
11 1/2 3/8 1/2 3/8 .748 .511 1.122 13/16 13/32 .970( 19 ) ( 13 ) ( 28.5 ) ( 20.63 ) ( 10.31 ) ( 27.5 )
11 1/2 1/2 1/2 1/2 .748 0.669 1.161 7/8 13/32 1.587( 19 ) ( 17 ) ( 29.5 ) ( 22.22 ) ( 10.31 ) ( 46 )
PN 13
Female Connector
13 5/32 1/8 5/32 1/8 .354 .334 .964 9/16 .423( 9 ) ( 8.5 ) ( 24.5 ) ( 14.28 ) ( 12 )
13 1/4 1/8 1/4 1/8 .472 .334 1.043 9/16 .494( 12 ) ( 8.5 ) ( 26.5 ) ( 14.28 ) ( 14 )
13 1/4 1/4 1/4 1/4 .472 .511 1.220 11/16 .935( 12 ) ( 13 ) ( 31 ) ( 17.46 ) ( 26.5 )
13 5/16 1/8 5/16 1/8 .551 .334 1.039 9/16 .705( 14 ) ( 8.5 ) ( 26.4 ) ( 14.28 ) ( 20 )
13 5/16 1/4 5/16 1/4 .551 .511 1.220 11/16 1.005( 14 ) ( 13 ) ( 31 ) ( 17.46 ) ( 28.5 )
13 3/8 1/4 3/8 1/4 .629 .511 1.299 11/16 1.164( 16 ) ( 13 ) ( 33 ) ( 17.46 ) ( 33 )
13 3/8 3/8 3/8 3/8 .629 .511 1.299 13/16 1.340( 16 ) ( 13 ) ( 33 ) ( 20.63 ) ( 38 )
10
americano cmatic 31-05-2007 9:44 Pagina 10
PNLI
NE
PN 14
Male Elbow
PartNumber Tube OD D1 NPTF D2 L1 L2 L3 HEX oz
PartNumber Tube OD D1 UNF D2 L1 L2 L3 HEX oz
14 5/32 1/8 5/32 1/8 .354 .334 .610 .669 .314 .317( 9 ) ( 8.5 ) ( 15.5 ) ( 17 ) ( 8 ) ( 9 )
14 1/4 1/8 1/4 1/8 .472 .334 .629 .787 .393 .459( 12 ) ( 8.5 ) ( 16 ) ( 20 ) ( 10 ) ( 13 )
14 1/4 1/4 1/4 1/4 .472 .433 .787 .787 .393 .600( 12 ) ( 11 ) ( 20 ) ( 20 ) ( 10 ) ( 17 )
14 5/16 1/8 5/16 1/8 .551 .334 .669 .846 .472 .723( 14 ) ( 8.5 ) ( 17 ) ( 21.5 ) ( 12 ) ( 20.5 )
14 5/16 1/4 5/16 1/4 .551 .433 .826 .846 .472 .794( 14 ) ( 11 ) ( 21 ) ( 21.5 ) ( 12 ) ( 22.5 )
14 3/8 1/4 3/8 1/4 .629 .433 .885 .944 .551 1.041( 16 ) ( 11 ) ( 22.5 ) ( 24 ) ( 14 ) ( 29.5 )
14 3/8 3/8 3/8 3/8 .629 .433 .885 .944 .551 1.182( 16 ) ( 11 ) ( 22.5 ) ( 24 ) ( 14 ) ( 33.5 )
PN 15
Swivel Male Elbow
15 1/8 10-32 1/8 10-32 .275 .196 .649 .570 3/8 .282( 7 ) ( 5 ) ( 16.5 ) ( 14.5 ) ( 9.52 ) ( 8 )
15 5/32 10-32 5/32 10-32 .354 .196 .649 .669 3/8 .353( 9 ) ( 5 ) ( 16.5 ) ( 17 ) ( 9.52 ) ( 10 )
PartNumber Tube OD D1 NPTF D2 L1 L2 L3 HEX oz
15 1/8 1/8 1/8 1/8 .275 .334 .728 .570 7/16 .370( 7 ) ( 8.5 ) ( 18.5 ) ( 14.5 ) ( 11.11 ) ( 10.5 )
15 5/32 1/8 5/32 1/8 .354 .334 .728 .669 7/16 .441( 9 ) ( 8.5 ) ( 18.5 ) ( 17 ) ( 11.11 ) ( 12.5 )
15 5/32 1/4 5/32 1/4 .354 .511 1.023 .748 9/16 .794( 9 ) ( 13 ) ( 26 ) ( 19 ) ( 14.28 ) ( 22.5 )
15 1/4 1/8 1/4 1/8 .472 .334 .826 .846 1/2 .688( 12 ) ( 8.5 ) ( 21 ) ( 21.5 ) ( 12.7 ) ( 19.5 )
15 1/4 1/4 1/4 1/4 .472 .511 1.023 .846 9/16 .882( 12 ) ( 13 ) ( 26 ) ( 21.5 ) ( 14.28 ) ( 25 )
15 5/16 1/8 5/16 1/8 .551 .334 .826 .866 1/2 .811( 14 ) ( 8.5 ) ( 21 ) ( 22 ) ( 12.7 ) ( 23 )
15 5/16 1/4 5/16 1/4 .551 .511 1.023 .866 9/16 1.005( 14 ) ( 13 ) ( 26 ) ( 22 ) ( 14.28 ) ( 28.5 )
15 5/16 3/8 5/16 3/8 .551 .511 1.122 .885 11/16 1.411( 14 ) ( 13 ) ( 28.5 ) ( 22.5 ) ( 17.46 ) ( 40 )
15 3/8 1/8 3/8 1/8 .629 .334 .944 .984 11/16 1.376( 16 ) ( 8.5 ) ( 24 ) ( 25 ) ( 17.46 ) ( 39 )
15 3/8 1/4 3/8 1/4 .629 .511 1.122 .984 11/16 1.482( 16 ) ( 13 ) ( 28.5 ) ( 25 ) ( 17.46 ) ( 42 )
15 3/8 3/8 3/8 3/8 .629 .511 1.122 .984 11/16 1.517( 16 ) ( 13 ) ( 28.5 ) ( 25 ) ( 17.46 ) ( 43 )
15 3/8 1/2 3/8 1/2 .629 .669 1.338 .984 7/8 2.187( 16 ) ( 17 ) ( 34 ) ( 25 ) ( 22.22 ) ( 62 )
15 1/2 1/4 1/2 1/4 .748 .511 1.259 1.082 13/16 2.346( 19 ) ( 13 ) ( 32 ) ( 27.5 ) ( 20.63 ) ( 66.5 )
15 1/2 3/8 1/2 3/8 .748 .511 1.259 1.082 13/16 2.222( 19 ) ( 13 ) ( 32 ) ( 27.5 ) ( 20.63 ) ( 63 )
15 1/2 1/2 1/2 1/2 .748 .669 1.437 1.082 7/8 2.663( 19 ) ( 17 ) ( 36.5 ) ( 27.5 ) ( 22.22 ) ( 75.5 )
11
americano cmatic 31-05-2007 9:44 Pagina 11
PN 17
Swivel Female Elbow
PartNumber Tube OD D1 NPTF D2 L1 L2 L3 HEX oz
17 5/32 1/8 5/32 1/8 .354 .334 .767 .748 9/16 .741( 9 ) ( 8.5 ) ( 19.5 ) ( 19 ) ( 14.28 ) ( 21 )
17 1/4 1/8 1/4 1/8 .472 .334 .767 .846 9/16 .811( 12 ) ( 8.5 ) ( 19.5 ) ( 21.5 ) ( 14.28 ) ( 23 )
17 1/4 1/4 1/4 1/4 .472 .511 .925 .846 11/16 1.129( 12 ) ( 13 ) ( 23.5 ) ( 21.5 ) ( 17.46 ) ( 32 )
17 5/16 1/8 5/16 1/8 .551 .334 .767 .866 9/16 .935( 14 ) ( 8.5 ) ( 19.5 ) ( 22 ) ( 14.28 ) ( 26.5 )
17 5/16 1/4 5/16 1/4 .551 .511 .925 .866 11/16 1.252( 14 ) ( 13 ) ( 23.5 ) ( 22 ) ( 17.46 ) ( 35.5 )
17 3/8 1/4 3/8 1/4 .629 .511 1.003 .984 11/16 1.570( 16 ) ( 13 ) ( 25.5 ) ( 25 ) ( 17.46 ) ( 44.5 )
17 3/8 3/8 3/8 3/8 .629 .511 1.003 .984 13/16 1.728( 16 ) ( 13 ) ( 25.5 ) ( 25 ) ( 20.63 ) ( 49 )
PN 18
Swivel fitting with banjo ring
PartNumber Tube OD D1 NPTF D2 L1 L2 L3 L4 HEX1 HEX2 oz
18 5/32 1/8 5/32 1/8 .354 .334 .787 .787 1.200 9/16 1/8 1.005( 9 ) ( 8.5 ) ( 20 ) ( 20 ) ( 30.5 ) ( 14.28 ) ( 3.17 ) ( 28.5 )
18 1/4 1/8 1/4 1/8 .472 .334 .787 .885 1.200 9/16 1/8 1.058( 12 ) ( 8.5 ) ( 20 ) ( 22.5 ) ( 30.5 ) ( 14.28 ) ( 3.17 ) ( 30 )
18 1/4 1/4 1/4 1/4 .472 .511 1.023 .925 1.476 11/16 3/16 1.728( 12 ) ( 13 ) ( 26 ) ( 23.5 ) ( 37.5 ) ( 17.46 ) ( 4.76 ) ( 49 )
18 5/16 1/8 5/16 1/8 .551 .334 .787 .885 1.200 9/16 1/8( 14 ) ( 8.5 ) ( 20 ) ( 22.5 ) ( 30.5 ) ( 14.28 ) ( 3.17 )
18 5/16 1/4 5/16 1/4 .551 .511 1.023 .944 1.476 11/16 3/16( 14 ) ( 13 ) ( 26 ) ( 24 ) ( 37.5 ) ( 17.46 ) ( 4.76 )
18 5/16 3/8 5/16 3/8 .551 .511 1.102 1.023 1.614 13/16 1/4( 14 ) ( 13 ) ( 28 ) ( 26 ) ( 41 ) ( 20.63 ) ( 6.35 )
18 3/8 1/4 3/8 1/4 .629 .511 1.023 1.023 1.476 11/16 3/16 1.834( 16 ) ( 13 ) ( 26 ) ( 26 ) ( 37.5 ) ( 17.46 ) ( 4.76 ) ( 52 )
18 3/8 3/8 3/8 3/8 .629 .511 1.102 1.102 1.614 13/16 1/4 2.963( 16 ) ( 13 ) ( 28 ) ( 28 ) ( 41 ) ( 20.63 ) ( 6.35 ) ( 84 )
PN 20
Swivel Tee
PartNumber Tube OD D1 NPTF D2 L1 L2 L3 HEX oz
20 1/8 1/8 1/8 1/8 .275 .334 .728 1.141 7/16 .670( 7 ) ( 8.5 ) ( 18.5 ) ( 29 ) ( 11.11 ) ( 19 )
20 5/32 1/8 5/32 1/8 .354 .334 .826 1.496 1/2 .776( 9 ) ( 8.5 ) ( 21 ) ( 38 ) ( 12.7 ) ( 22 )
20 5/32 1/4 5/32 1/4 .354 .511 1.023 1.496 9/16 .970( 9 ) ( 13 ) ( 26 ) ( 38 ) ( 14.28 ) ( 27.5 )
20 1/4 1/8 1/4 1/8 .472 .334 .826 1.692 1/2 .917( 12 ) ( 8.5 ) ( 21 ) ( 43 ) ( 12.7 ) ( 26 )
20 1/4 1/4 1/4 1/4 .472 .511 1.023 1.692 9/16 1.076( 12 ) ( 13 ) ( 26 ) ( 43 ) ( 14.28 ) ( 30.5 )
20 5/16 1/8 5/16 1/8 .551 .334 .826 1.732 1/2 1.111( 14 ) ( 8.5 ) ( 21 ) ( 44 ) ( 12.7 ) ( 31.5 )
20 5/16 1/4 5/16 1/4 .551 .511 1.023 1.732 9/16 1.305( 14 ) ( 13 ) ( 26 ) ( 44 ) ( 14.28 ) ( 37 )
20 3/8 1/4 3/8 1/4 .629 .511 1.122 1.968 11/16 1.905( 16 ) ( 13 ) ( 28.5 ) ( 50 ) ( 17.46 ) ( 54 )
20 3/8 3/8 3/8 3/8 .629 .511 1.122 1.968 11/16 1.940( 16 ) ( 13 ) ( 28.5 ) ( 50 ) ( 17.46 ) ( 55 )
20 1/2 3/8 1/2 3/8 .748 .511 1.259 2.165 13/16 2.751( 19 ) ( 13 ) ( 32 ) ( 55 ) ( 20.63 ) ( 78 )
20 1/2 1/2 1/2 1/2 .748 .669 1.437 2.165 7/8 3.175( 19 ) ( 17 ) ( 36.5 ) ( 55 ) ( 22.22 ) ( 90 )
12
americano cmatic 31-05-2007 9:44 Pagina 12
PNLI
NE
PN 23
Swivel Male Run Tee
PartNumber Tube OD D1 NPTF D2 L1 L2 L3 L4 oz
23 1/8 1/8 1/8 1/8 .275 .334 .728 .649 1.476 7/16 .688( 7 ) ( 8.5 ) ( 18.5 ) ( 16.5 ) ( 37.5 ) ( 11.11 ) ( 19.5 )
23 5/32 1/8 5/32 1/8 .354 .334 .826 .748 1.574 1/2 .811( 9 ) ( 8.5 ) ( 21 ) ( 19 ) ( 40 ) ( 12.7 ) ( 23 )
23 5/32 1/4 5/32 1/4 .354 .511 1.023 .748 1.771 9/16 .988( 9 ) ( 13 ) ( 26 ) ( 19 ) ( 45 ) ( 14.28 ) ( 28 )
23 1/4 1/8 1/4 1/8 .472 .334 .826 .846 1.673 1/2 .935( 12 ) ( 8.5 ) ( 21 ) ( 21.5 ) ( 42.5 ) ( 12.7 ) ( 26.5 )
23 1/4 1/4 1/4 1/4 .472 .511 1.023 .846 1.870 9/16 1.093( 12 ) ( 13 ) ( 26 ) ( 21.5 ) ( 47.5 ) ( 14.28 ) ( 31 )
23 5/16 1/8 5/16 1/8 .551 .334 .826 .866 1.692 1/2 1.129( 14 ) ( 8.5 ) ( 21 ) ( 22 ) ( 43 ) ( 12.7 ) ( 32 )
23 5/16 1/4 5/16 1/4 .551 .511 1.023 .866 1.889 9/16 1.305( 14 ) ( 13 ) ( 26 ) ( 22 ) ( 48 ) ( 14.28 ) ( 37 )
23 3/8 1/4 3/8 1/4 .629 .511 1.122 .984 2.106 11/16 1.905( 16 ) ( 13 ) ( 28.5 ) ( 25 ) ( 53.5 ) ( 17.46 ) ( 54 )
23 3/8 3/8 3/8 3/8 .629 .511 1.122 .984 2.106 11/16 1.940( 16 ) ( 13 ) ( 28.5 ) ( 25 ) ( 53.5 ) ( 17.46 ) ( 55 )
23 1/2 3/8 1/2 3/8 .748 .511 1.259 1.082 2.342 13/16 2.734( 19 ) ( 13 ) ( 32 ) ( 27.5 ) ( 59.5 ) ( 20.63 ) ( 77.5 )
23 1/2 1/2 1/2 1/2 .748 .669 1.437 1.082 2.519 7/8 3.139( 19 ) ( 17 ) ( 36.5 ) ( 27.5 ) ( 64 ) ( 22.22 ) ( 89 )
HEX
PN 25
Reducer
PartNumber Tube OD D1 D2 L1 oz
25 1/8 5/32 1/8 5/32 .275 1.141 .088( 7 ) ( 29 ) ( 2.5 )
25 5/32 1/4 5/32 1/4 .354 1.220 .265( 9 ) ( 31 ) ( 7.5 )
25 1/4 5/16 1/4 5/16 .472 1.299 .406( 12 ) ( 33 ) ( 11.5 )
25 1/4 3/8 1/4 3/8 .472 1.377 .476( 12 ) ( 35 ) ( 13.5 )
25 1/4 1/2 1/4 1/2 .472 1.377 .882( 12 ) ( 35 ) ( 25 )
25 5/16 3/8 5/16 3/8 .551 1.377 .547( 14 ) ( 35 ) ( 15.5 )
25 3/8 1/2 3/8 1/2 .629 1.417 .864( 16 ) ( 36 ) ( 24.5 )
PN 26
Union
PartNumber Tube OD1 Tube OD1 D2 L1 oz
26 1/8 1/8 1/8 1/8 .275 .866 .106( 7 ) ( 22 ) ( 3 )
26 5/32 5/32 5/32 5/32 .354 1.062 .265( 9 ) ( 27 ) ( 7.5 )
26 1/4 1/4 1/4 1/4 .472 1.299 .476( 12 ) ( 33 ) ( 13.5 )
26 5/16 5/16 5/16 5/16 .551 1.299 .635( 14 ) ( 33 ) ( 18 )
26 3/8 3/8 3/8 3/8 .629 1.456 .882( 16 ) ( 37 ) ( 25 )
26 1/2 1/2 1/2 1/2 .748 1.535 1.411( 19 ) ( 39 ) ( 40 )
13
americano cmatic 31-05-2007 9:44 Pagina 13
PN 27
Bulkhead union
PartNumber Tube OD D1 L1 L2 HEX oz
27 1/8 1/8 1/8 M10x1 .866 .314 .551 .476( 22 ) ( 8 ) ( 14 ) ( 13.5 )
27 5/32 5/32 5/32 M12x1 1.062 .433 .629 .811( 27 ) ( 11 ) ( 16 ) ( 23 )
27 1/4 1/4 1/4 M14x1 1.299 .629 .708 1.146( 33 ) ( 16 ) ( 18 ) ( 32.5 )
27 5/16 5/16 5/16 M16x1 1.299 .669 .787 1.376( 33 ) ( 17 ) ( 20 ) ( 39 )
27 3/8 3/8 3/8 M18x1 1.456 .748 .866 1.870( 37 ) ( 19 ) ( 22 ) ( 53 )
27 1/2 1/2 1/2 M20x1 1.535 .787 .944 1.940( 39 ) ( 20 ) ( 24 ) ( 55 )
PN 28
Union Elbow
PartNumber Tube OD D2 L1 oz
28 1/8 1/8 1/8 .275 .590 .159( 7 ) ( 15 ) ( 4.5 )
28 5/32 5/32 5/32 .354 .669 .335( 9 ) ( 17 ) ( 9.5 )
28 1/4 1/4 1/4 .472 .787 .547( 12 ) ( 20 ) ( 15.5 )
28 5/16 5/16 5/16 .551 .846 .829( 14 ) ( 21.5 ) ( 23.5 )
28 3/8 3/8 3/8 .629 .964 1.129( 16 ) ( 24.5 ) ( 32 )
28 1/2 1/2 1/2 .748 1.0 1.817( 19 ) ( 25.5 ) ( 51.5 )
PN 29
Union Tee
PartNumber Tube OD D2 L1 L2 oz
29 1/8 1/8 1/8 .275 .590 1.181 .194( 7 ) ( 15 ) ( 30 ) ( 5.5 )
29 5/32 5/32 5/32 .354 .669 1.338 .441( 9 ) ( 17 ) ( 34 ) ( 12.5 )
29 1/4 1/4 1/4 .472 .787 1.574 .723( 12 ) ( 20 ) ( 40 ) ( 20.5 )
29 5/16 5/16 5/16 .551 .846 1.692 .988( 14 ) ( 21.5 ) ( 43 ) ( 28 )
29 3/8 3/8 3/8 .629 .964 1.929 1.482( 16 ) ( 24.5 ) ( 49 ) ( 42 )
29 1/2 1/2 1/2 .748 1.0 2.00 2.081( 19 ) ( 25.5 ) ( 51 ) ( 59 )
PN 31
Simple Screw
PartNumber D1 BSP L1 L2 L3 HEX oz
31 00 18 G1/8 .196 .905 1.062 .551 .494( 5 ) ( 23 ) ( 27 ) ( 14 ) ( 14 )
31 00 14 G1/4 .255 1.043 1.240 .669 .935( 6.5) ( 26.5 ) ( 31.5 ) ( 17 ) ( 26.5 )
31 00 38 G3/8 .275 1.181 1.417 .787 1.587( 7 ) ( 30 ) ( 36 ) ( 20 ) ( 45 )
14
americano cmatic 31-05-2007 9:44 Pagina 14
PNLI
NE
PartNumber D1 BSP L1 L2 L3 HEX oz
32 00 18 G1/8 .196 1.555 1.673 .551 .705( 5 ) ( 39.5 ) ( 42.5 ) ( 14 ) ( 20 )
32 00 14 G1/4 .255 1.771 1.968 .669 1.393( 6.5 ) ( 45 ) ( 50 ) ( 17 ) ( 39.5 )
32 00 38 G3/8 .275 2.027 2.263 .787 2.169( 7 ) ( 51.5 ) ( 57.5 ) ( 20 ) ( 61.5 )
PartNumber
35 5/32 1/8 5/32 .393 .354 .551 .590 .787 .494( 10) ( 9 ) ( 14 ) ( 15 ) ( 20 ) ( 14 )
35 1/4 1/8 1/4 .393 .472 .551 .590 .885 .547( 10 ) ( 12 ) ( 14 ) ( 15 ) ( 22.5 ) ( 15.5 )
35 1/4 1/4 1/4 .519 .472 .669 .669 .925( 13.2 ) ( 12 ) ( 17 ) ( 17 ) ( 23.5 )
35 5/16 1/8 5/16 .393 .551 .551 .590 .885 .670( 10 ) ( 14 ) ( 14 ) ( 15 ) ( 22.5 ) ( 19 )
35 5/16 1/4 5/16 .519 .551 .669 .669 .944( 13.2) ( 14 ) ( 17 ) ( 17 ) ( 24 )
35 5/16 3/8 5/16 .669 .551 .826 .787 1.023( 17 ) ( 14 ) ( 21 ) ( 20 ) ( 26 )
35 3/8 1/4 3/8 .519 .629 .669 .669 1.023( 13.2 ) ( 16 ) ( 17 ) ( 17 ) ( 26 )
35 3/8 3/8 3/8 .669 .629 .826 .787 1.102 1.270( 17 ) ( 16 ) ( 21 ) ( 20 ) ( 28 ) ( 36 )
PN 32
Double Screw
D1Tube OD D2 D3 L1 L2 oz
PN 35
Banjo Ring
PN 37
Union Y Connector
PartNumber Tube OD D2 L1 L2 oz
37 1/8 1/8 1/8 .275 .866 .275 .635( 7 ) ( 22 ) ( 7 ) ( 18 )
37 5/32 5/32 5/32 .354 1.122 .374 .476( 9 ) ( 28.5 ) ( 9.5 ) ( 13.5 )
37 1/4 1/4 1/4 .472 1.377 .492 1.093( 12 ) ( 35 ) ( 12.5 ) ( 31 )
37 5/16 5/16 5/16 .551 1.476 .570 1.482( 14 ) ( 37.5 ) ( 14.5 ) ( 42 )
15
americano cmatic 31-05-2007 9:44 Pagina 15
38 5/32 1/8 1/8 5/32 .334 1.122 7/16 .247( 8.5 ) ( 28.5 ) ( 11.11 ) ( 7 )
38 5/32 1/4 1/4 5/32 .511 1.318 9/16 .494( 13 ) ( 33.5 ) ( 14.28 ) ( 14 )
38 1/4 1/8 1/8 1/4 .334 1.200 7/16 .300( 8.5 ) ( 30.5 ) ( 11.11 ) ( 8.5 )
38 1/4 1/4 1/4 1/4 .511 1.397 9/16 .529( 13 ) ( 35.5 ) ( 14.28 ) ( 15 )
38 5/16 1/8 1/8 5/16 .334 1.279 7/16 .317( 8.5 ) ( 32.5 ) ( 11.11 ) ( 9 )
38 5/16 1/4 1/4 5/16 .511 1.476 9/16 .547( 13 ) ( 37.5 ) ( 14.28 ) ( 15.5 )
38 3/8 1/4 1/4 3/8 .511 1.555 9/16 .582( 13 ) ( 39.5 ) ( 14.28 ) ( 16.5 )
38 3/8 3/8 3/8 3/8 .511 1.574 11/16 .811( 13 ) ( 40 ) ( 17.46 ) ( 23 )
38 1/2 3/8 3/8 1/2 .511 1.692 11/16 .899( 13 ) ( 43 ) ( 17.46 ) ( 25.5 )
38 1/2 1/2 1/2 1/2 .669 1.889 7/8 1.517( 17 ) ( 48 ) ( 22.22 ) ( 43 )
PN 38
Stem adaptor
PartNumber D1 UNF D2 L1 L2 HEX oz
PartNumber D1 NPTF D2 L1 L2 HEX oz
38 5/32 10-32 10-32 5/32 .196 .984 5/16 .088( 5 ) ( 25 ) ( 7.93 ) ( 2.5 )
39 5/32 5/32 5/32 1.181 .088( 30 ) ( 2.5 )
39 1/4 1/4 1/4 1.377 .176( 35 ) ( 5 )
39 5/16 5/16 5/16 1.377 .265( 35 ) ( 7.5 )
39 3/8 3/8 3/8 1.574 .300( 40 ) ( 8.5 )
39 1/2 1/2 1/2 1.653 .494( 42 ) ( 14 )
PN 39
Extention Piece
PartNumber D1 L1 oz
PN 40
Plug
PartNumber D1 L1 oz
40 1/8 00 1/8 .787 .046( 20 ) ( 1.3 )
40 5/32 00 5/32 .984 .088( 25 ) ( 2.5 )
40 1/4 00 1/4 1.181 .229( 30 ) ( 6.5 )
40 5/16 00 5/16 1.181 .441( 30 ) ( 12.5 )
40 3/8 00 3/8 1.377 .723( 35 ) ( 20.5 )
40 1/2 00 1/2 1.496 1.482( 38 ) ( 42 )
16
americano cmatic 31-05-2007 9:44 Pagina 16
PNLI
NE
PartNumber Tube OD D1 L1 L2 oz
PartNumber
43 5/32 00 5/32 5/32 1.003 .669( 25.5 ) ( 17 )
43 1/4 00 1/4 1/4 1.161 .846( 29.5 ) ( 21.5 )
43 5/16 00 5/16 5/16 1.161 .866( 29.5 ) ( 22 )
43 3/8 00 3/8 3/8 1.319 .984( 33.5 ) ( 25 )
48 5/32 00 5/32 .354 .453( 9 ) ( 11.5 )
48 1/4 00 1/4 .472 .512( 12 ) ( 13 )
48 5/16 00 5/16 .551 .532( 14 ) ( 13.5 )
48 3/8 00 3/8 .63 .602( 16 ) ( 15.3 )
48 1/2 00 1/2 .787 .65( 20 ) ( 16.5 )
Pls always specify if body's material housing cartridges differs from plastics.
PN 43
Plug-in Elbow
D1Tube OD L1 oz
PN 48
Press-in Cartridge
5/32 .354 .118 .453( 9 ) ( 3 ) ( 11.5 )
1/4 .472 .197 .512( 12 ) ( 5 ) ( 13 )
5/16 .551 .276 .532( 14 ) ( 7 ) ( 13.5 )
3/8 .63 .354 .602( 16 ) ( 9 ) ( 15.3 )
1/2 .787 .433 .65( 20 ) ( 11 ) ( 16.5 )
D1Tube OD D2 L1
Cartridges seat drilling plan
17
americano cmatic 31-05-2007 9:44 Pagina 17
PX LINE
22_23PX 11PX 15PX 20PX 25PX 26PX 28PX 29
Technical remarks 20_21
PXLI
NE
PX 15PX 11 PX 20 PX 25 PX 26 PX 28 PX 29
americano cmatic 31-05-2007 9:44 Pagina 19
THE PX LINE
PX is our new stainless steel fittings line.Suitable for all those applications wherebrass nickel-plated and acetal fittings arebanned, the new AISI 316L fitting is con-ceived to withstand corrosive environ-ments (substances), to channel aggressivefluids and to be used in the food, pharma-ceutical and chemical industries.PX comes with FPM seals to guaranteethe best performance at the highest tem-peratures.
DATA SHEET
Recommended tubings:PVDF, PTFEAcceptable tubing tolerances:+/- .003”
Application fields:Food, chemical, pharmaceutical, oil andpakaging industry.Working pressure:Pressure varies depending on the tubingused and in any case it never has toexceed 217 psi.In case of application with fluids, pls fol-low instructions below:Constant pressure:Max pressure 217 psiPulse pressure:Max pressure 145 psiVacuum rating: to 28” HgWorking temperature:– 4°F ÷ 302 °F depending on the materialsand tube diameters used.
Body Release ring Tightness ring Gripping collet Protection ring O-Ring
1 2 3 4 5 6
Stainless steel AISI 316L Stainless steel AISI 316L Stainless steel AISI 316L Stainless steel AISI 301 Stainless steel AISI 316L FPM/FKM
PX LINE
2
6
5
1
4
3
Identification mark for inch sizes. Identification mark for NPTF threads.
ZOOM IN
20
americano cmatic 31-05-2007 9:47 Pagina 20
ASSEMBLY INSTRUCTIONS
1. Cut the tube square (by means of a tube cutter i.e. our PA 34) making sure that no burrs are left and that the tube is not oval.
2. Push the tubing until it bottoms.
Tube release
3. While pressing on the release ring, pull out the tube from the fitting.
PXLI
NE
Threads SpecificationsThreads Tightening Torque (lb-ft)
10-32 1/8" 3/8" 1/2"
7.376 ÷ 8.8513.688 ÷ 4.425
1/4"
10.326 ÷ 11.8015.901 ÷ 7.376
11.801 ÷ 13.2767.376 ÷ 8.851
13.276 ÷ 14.75111.801 ÷ 13.276
ANSI/ASME B1.20.3ANSI/ASME B1.20.3ANSI/ASME B1.1
NPTF threadsNPTF pre-coated threadsUNF parallel threads with seal 0.738 ÷ 1.106
Our tapered male straight connec-tor is provided with an inner hexallowing for easy assembly whenno space is available.
1 2 3
21
americano cmatic 31-05-2007 9:47 Pagina 21
PX 11
Male Connector
PartNumber D2 L1Tube OD D1 NPTF L2 HEX 1 (mm) HEX2 oz
PartNumber D2 L1Tube OD D1 NPTF L2 L3 HEX (mm) oz
11 5/32 1/8 5/32 1/8 .354 .334 .748 11 1/8( 9 ) ( 8.5 ) ( 19 ) ( 3.17 )
11 1/4 1/8 1/4 1/8 .472 .334 .846 13 5/32( 12 ) ( 8.5 ) ( 21.5 ) ( 4 )
11 1/4 1/4 1/4 1/4 .472 .511 .944 14 5/32( 12 ) ( 13 ) ( 24 ) ( 4 )
11 5/16 1/4 5/16 1/4 .551 .511 .984 14 1/4( 14 ) ( 13 ) ( 25 ) ( 6.35 )
11 3/8 1/4 3/8 1/4 .629 .511 1.220 17 5/16( 16 ) ( 13 ) ( 31 ) ( 8 )
11 3/8 3/8 3/8 3/8 .629 .511 .964 18 5/16( 16 ) ( 13 ) ( 24.5 ) ( 8 )
11 1/2 3/8 1/2 3/8 .748 .511 1.122 20 13/32( 19 ) ( 13 ) ( 28.5 ) ( 10.31 )
11 1/2 1/2 1/2 1/2 .748 0,669 1.161 22 13/32( 19 ) ( 17 ) ( 29.5 ) ( 10.31)
15 5/32 1/8 5/32 1/8 .354 .334 .728 .669 11( 9 ) ( 8.5 ) ( 18.5 ) ( 17 )
15 1/4 1/8 1/4 1/8 .472 .334 .826 .846 13( 12 ) ( 8.5 ) ( 21 ) ( 21.5 )
15 1/4 1/4 1/4 1/4 .472 .511 1.023 .846 14( 12 ) ( 13 ) ( 26 ) ( 21.5 )
15 5/16 1/4 5/16 1/4 .551 .511 1.023 .866 14( 14 ) ( 13 ) ( 26 ) ( 22 )
15 3/8 1/4 3/8 1/4 .629 .511 1.122 .984 17( 16 ) ( 13 ) ( 28.5 ) ( 25 )
15 3/8 3/8 3/8 3/8 .629 .511 1.122 .984 18( 16 ) ( 13 ) ( 28.5 ) ( 25 )
15 1/2 3/8 1/2 3/8 .748 .511 1.259 1.082 20( 19 ) ( 13 ) ( 32 ) ( 27.5 )
15 1/2 1/2 1/2 1/2 .748 .669 1.437 1.082 22( 19 ) ( 17 ) ( 36.5 ) ( 27.5 )
PartNumber D2 L1Tube OD D1 NPTF L2 L 3 HEX (mm) oz
20 5/32 1/8 5/32 1/8 .354 .334 .905 1.337 11( 9 ) ( 8.5 ) ( 23 ) ( 34 )
20 1/4 1/8 1/4 1/8 .472 .334 .905 1.614 13( 12 ) ( 8.5 ) ( 23 ) ( 41 )
20 1/4 1/4 1/4 1/4 .472 .511 1.2 1.614 14( 12 ) ( 13 ) ( 30.5 ) ( 41 )
20 5/16 1/4 5/16 1/4 .551 .511 1.2 1.653 14( 14 ) ( 13 ) ( 30.5 ) ( 42 )
20 3/8 1/4 3/8 1/4 .629 .511 1.259 1.811 17( 16 ) ( 13 ) ( 32 ) ( 46 )
20 3/8 3/8 3/8 3/8 .629 .511 1.259 1.811 18( 16 ) ( 13 ) ( 32 ) ( 46 )
PX 15
Swivel Male Elbow
PX 20
Swivel Tee
22
americano cmatic 31-05-2007 9:47 Pagina 22
PX 25
Reducer
PartNumber Tube OD D1 D2 L1 oz
25 5/32 1/4 5/32 1/4 .354 1.220( 9 ) ( 31 )
25 1/4 5/16 1/4 5/16 .472 1.377( 12 ) ( 34 )
25 1/4 3/8 1/4 3/8 .472 1.377( 12 ) ( 34 )
25 5/16 3/8 5/16 3/8 .551 1.417( 14 ) ( 36 )
26 5/32 5/32 5/32 5/32 .354 1.062( 9 ) ( 27 )
26 1/4 1/4 1/4 1/4 .472 1.299( 12 ) ( 33 )
26 5/16 5/16 5/16 5/16 .551 1.299( 14 ) ( 33 )
26 3/8 3/8 3/8 3/8 .629 1.456( 16 ) ( 37 )
26 1/2 1/2 1/2 1/2 .748 1.535( 19 ) ( 39 )
PX 26
Union
PartNumber Tube OD1 Tube OD2 D2 L1 oz
28 5/32 5/32 5/32 .354 .669( 9 ) ( 17 )
28 1/4 1/4 1/4 .472 .787( 12 ) ( 20 )
28 5/16 5/16 5/16 .551 .846( 14 ) ( 21.5 )
28 3/8 3/8 3/8 .629 .964( 16 ) ( 24.5 )
28 1/2 1/2 1/2 .748 1.023( 19 ) ( 26 )
PX 28
Union Elbow
PartNumber Tube OD D2 L1 oz
29 5/32 5/32 5/32 .354 .669 1.338( 9 ) ( 17 ) ( 34 )
29 1/4 1/4 1/4 .472 .787 1.574( 12 ) ( 20 ) ( 40 )
29 5/16 5/16 5/16 .551 .846 1.692( 14 ) ( 21.5 ) ( 43 )
29 3/8 3/8 3/8 .629 .964 1.929( 16 ) ( 24.5 ) ( 49 )
29 1/2 1/2 1/2 .748 1.023 2.046( 19 ) ( 26 ) ( 52 )
PX 29
Union Tee
PartNumber D2Tube OD L1 L2 oz
PXLI
NE
23
americano cmatic 31-05-2007 9:47 Pagina 23
PA LINE
27_28PA 14PA 16PA 17PA 19PA 34PA 37
TUBING
Technical remarks 26_26
PA L
INE
& T
UB
ING
PA 16PA 14 PA 17 PA 19 PA 34 PA 37 TUBING
americano cmatic 31-05-2007 9:47 Pagina 25
THE PA LINE
PA is our range of accessories, a comple-ment line to the Push-in and the flow con-trol fittings.All components are brass nickel-plated.
DATA SHEET
Max working pressure:870 psiApplication fields:Pneumatic, hydraulic, oleodynamic andhydropneumatic installations.
Body
1
Brass UNI EN 12164 CW614N Nickel Plated
PA LINE
11
Threads SpecificationsThreads Tightening Torque (lb-ft)
10-32 1/8" 3/8" 1/2"
7.376 ÷ 8.8513.688 ÷ 4.425
1/4"
10.326 ÷ 11.8015.901 ÷ 7.376
11.801 ÷ 13.2767.376 ÷ 8.851
13.276 ÷ 14.75111.801 ÷ 13.276
ANSI/ASME B1.20.3ANSI/ASME B1.20.3ANSI/ASME B1.1
NPTF threadsNPTF pre-coated threadsUNF parallel threads with seal 0.738 ÷ 1.106
26
americano cmatic 31-05-2007 9:47 Pagina 26
PA 14
Taper female-male reducing connector
PartNumber D2 NPTF L1D1 NPTF L2 HEX oz
PartNumber D2 BSP L1D1 NPTF L2 HEX oz
PartNumber D2 BSP L1D1 NPTF L2 HEX oz
14 18 10-32 1/8 10-32 UNF .334 .590 .472( 8.5 ) ( 15 ) ( 12 )
14 1/4 1/8 1/4 1/8 .511 .748 .551 .441( 13 ) ( 19 ) ( 14 ) ( 12.5 )
14 3/8 1/8 3/8 1/8 .511 .748 .708( 13 ) ( 19 ) ( 18 )
14 3/8 1/4 3/8 1/4 .511 .748 .708 .635( 13 ) ( 19 ) ( 18 ) ( 18 )
14 1/2 1/4 1/2 1/4 .669 .944 .866( 17 ) ( 24 ) ( 22 )
14 1/2 3/8 1/2 3/8 .669 .944 .866( 17 ) ( 24 ) ( 22 )
16 10-32 M5 10-32 UNF M5x0.8 .196 .472 .315( 5 ) ( 12 ) ( 8 )
16 1/8 1/8 1/8 G1/8 .334 .748 .708 0.423( 8.5 ) ( 19 ) ( 18 ) ( 12 )
16 1/4 1/4 1/4 G1/4 .511 1.063 .708 0.952( 13 ) ( 27 ) ( 18 ) ( 27 )
16 3/8 3/8 3/8 G3/8 .511 1.063 .866 1.376( 13 ) ( 27 ) ( 22 ) ( 39 )
16 1/2 1/2 1/2 G1/2 .669 1.338 1.063 2.310( 17 ) ( 34 ) ( 27 ) ( 65.5 )
17 1/8 1/8 1/8 G1/8 .236 .708 .551 .688( 6 ) ( 18 ) ( 14 ) ( 12.5 )
17 1/4 1/4 1/4 G1/4 .315 .944 .669 .952( 8 ) ( 24 ) ( 17 ) ( 27 )
17 3/8 3/8 3/8 G3/8 .354 .984 .822 1.376( 9 ) ( 25 ) ( 22 ) ( 39 )
17 1/2 1/2 1/2 G1/2 .393 1.181 .944 1.746( 10 ) ( 30 ) ( 24 ) ( 49.5 )
PA 16
Adaptor male-female, taper
PA 17
Adaptor male-female, parallel
PA 19
Male plug
PartNumber L1D1 NPTF L2 HEX oz
19 00 1/8 1/8 .334 .492 .472 .211( 8.5 ) ( 12.5 ) ( 12 ) ( 6 )
19 00 1/4 1/4 .511 .708 .551 .493( 13 ) ( 18 ) ( 14 ) ( 14 )
19 00 3/8 3/8 .511 .708 .708 .846( 13 ) ( 18 ) ( 18 ) ( 24 )
19 00 1/2 1/2 .669 .905 .866( 17 ) ( 23 ) ( 22 )
PA L
INE
& T
UB
ING
27
americano cmatic 31-05-2007 9:47 Pagina 27
34 12 from 1/8" to 1/2" 5.120 3.510( 130 ) ( 99.5 )
34 25 from 1/2" to 1" 7.283 10.335( 185 ) ( 293 )
PA 34
Hose Cutter
PartNumber Tube OD L oz
37 12 from 1/8" to 1/2"
37 25 from 1/2" to 1"
PA 37
Spare Blades
PartNumber Tube OD
PartNumber
Diameter Pressure at 75°F
Bend Radius (in)
28010000-colour 1/8 .093 .375 264 105828010010-colour 5/32 .106 .500 348 139228010030-colour 1/4 .180 .875 293 117428010040-colour 5/16 .232 1.250 268 107328010050-colour 3/8 .275 1.500 279 111628010060-colour 1/2 .375 2.000 257 1029
OD (in) ID (in) Working pressure (psi) Bursting point (psi)
POLYAMIDE 12
Pressure variation (%) in relation with temperature change
100%85%60%40%35%
68°F104°F140°F176°F212°F
FLEXIBLE TUBINGLimited humidity absorption, great dimensional sta-bility at high temperatures and good chemical resis-tance are the major features of the C.MATICPolyamide 12, highly recommended for all standardindustrial applications.
Working temperature: -40°F to +212°FVacuum rating: To 28” HgHardness: 64 Shore DWorking Pressure: 4 to 1 Safety FactorWater absorption: 1%Diameter Tolerances: +/- .002
PartNumber
Diameter Pressure at 75°F
Bend Radius (in)
28060000-colour 1/8 .0625 1/4 256 76828060010-colour 5/32 3/32 3/8 193 58028060030-colour 1/4 .160 1/2 169 50728060040-colour 5/16 .216 3/4 140 42028060050-colour 3/8 .245 7/8 164 49328060060-colour 1/2 .320 1 1/8 169 507
OD (in) ID (in) Working pressure (psi) Bursting point (psi)
POLYURETHAN 95 DUROMETER
Pressure variation (%) in relation with temperature change
100%83%72%64%47%
68°F86°F104°F122°F140°F
FLEXIBLE TUBINGC.MATIC ether based Polyurethan resists attackwith moisture, humidity and fungus.It is highly abrasion and UV resistant.Its flexibility allows for assemblies in reduced spa-ces and for very narrow bending radius and makesof our Polyurethan 95 one of the most popular choi-ces.
Working temperature: -40°F to +140°F.Vacuum rating: To 28” HgHardness: 95 Shore AWorking Pressure: 3 to 1 Safety FactorDiameter Tolerances: +/- .003
Reel length: 100 feet.Colours available: Neutral (N), Blue (B) and Black (BK) on stock. Other colours available upon request.
Reel length: 100 feet.Colours available: Neutral (N), Blue (B) and Black (BK) on stock. Other colours available upon request.
PA11 and PTFE tubings available upon request.
L
28
americano cmatic 31-05-2007 9:47 Pagina 28
PU LINE
31_33PU 10-11PU 10-12PU 10-20PU 10-21
P 113P 213
Technical remarks 30_30
PULI
NE
PU 10-11 PU 10-12 PU 10-20 PU 10-21 P 113
M U L T I P L E C O N N E C T O R
P 213
americano cmatic 31-05-2007 9:47 Pagina 29
Body Balls O-Ring Spring Plug
1 2 3 4
Brass UNI EN 12164 CW614N Nickel Plated Stainless steel AISI420 NBR Stainless steel AISI302 Hardened zinc plated steel
MULTI PROFILE QUICK COUPLER
C.MATIC single shut off coupler is IndustrialInterchangeable and suitable with the mostcommon European plugs profiles.
DATA SHEET
Application fields:Pneumatic equipment, Air toolsWorking pressure:0 ÷ 218 psiWorking temperature:- 4°F ÷ 158°F
MULTI PROFILE
Suitable with following plugs profiles
actual size
Flow rate at 87 psi
MIL C4109 Profile
ARO 210 Profile
German Profile
46 SCFM
41 SCFM
56.5 SCFM
ISO 6150 B Profile
Standard Swedisch Profile
Standard Italian Profile
45 SCFM
45 SCFM
38 SCFM
QUICK COUPLER-INDUSTRIAL INTERCHANGE
2
1 3
4
30
americano cmatic 31-05-2007 9:47 Pagina 30
PU 10
Male coupligD2
PartNumber D2 L1D1 NPTF L2 HEX oz
PartNumber D2 L1D1 NPTF L2 HEX oz
11 00 14 1/4 .925 .511 2.165 .787( 23.5 ) ( 13 ) ( 55 ) ( 20 )
11 00 38 3/8 .925 .511 2.165 .787( 23.5 ) ( 13 ) ( 55 ) ( 20 )
11 00 12 1/2 .925 .669 2.283 .945( 23.5 ) ( 17 ) ( 58 ) ( 24 )
12 00 14 1/4 .925 .511 2.165 .787( 23.5 ) ( 13 ) ( 59 ) ( 20 )
12 00 38 3/8 .925 .511 2.362 .787( 23.5 ) ( 13 ) ( 60 ) ( 20 )
12 00 12 1/2 .925 .551 2.48 .945( 23.5 ) ( 14 ) ( 63 ) ( 24 )
PU 10
Female couplig
PU 10
Male plug
PartNumber L1D1 NPTF HEX oz
L1D1 NPTF HEX ozPartNumber
20 00 14 1/4 1.654 .551( 42 ) ( 14 )
20 00 38 3/8 1.654 .708( 42 ) ( 18 )
20 00 12 1/2 1.85 .866( 47 ) ( 22 )
21 00 14 1/4 1.575 .669( 40 ) ( 17 )
21 00 38 3/8 1.575 .822( 40 ) ( 22 )
21 00 12 1/2 1.732 .944( 44 ) ( 24 )
PU 10
Female plug
PULI
NE
GE
31
americano cmatic 31-05-2007 9:47 Pagina 31
MULTIPLE CONNECTOR
The multiple connector is made of a fixedpart to be connected to the control deviceof pneumatic powered machines and amobile part to be assembled to the airdistribution equipment. The big advantageoffered by it, is that a bundle of hoses,varying from min 10 to max 20 tubings, canbe rapidly and safely connected anddisconnected.Our multiple connector is manufactured insuch a way that the reverse assembly ofthe two parts is not possible.
DATA SHEET
Application fields:Pneumatic installationsRecommended tubing:PA 6,PA 11, PA 12Polyethylene, Polyurethane (95 durometeror above).Working pressure:0 ÷ 218 psiWorking temperature:- 4°F ÷ 158°F
Multiple connector sheath Couplings support O-Ring Push-in fittings
Light die cast alloy Aluminium NBR PN Push-In fittings
MULTIPLE
Hoses
Plug
Socket
Push-in fittings system
Push-in fittings
Socket with cap
Plug cap
CONNECTOR
32
americano cmatic 31-05-2007 9:47 Pagina 32
E
F
Ø
LH
Socket housing
PULI
NE
P 113
Equipped with push-in fittings
PartNumber Tube OD
113 5/32 12113 1/4 10
5/321/4
24.86829.877
Couplings n°
1210
oz
P 213
Equipped with push-in fittings
PartNumber Tube OD
213 5/32 20213 1/4 14
5/321/4
32.94637.884
Couplings n°
2014
oz
CE
F
Ø
D
G
CB
A
Socket
Plug
Type A B C D E F G H L ØP113 3.661 3.937 1.772 4.449 4.055 1.260 1.102 3.386 1.417 .177
( 93 ) ( 100 ) ( 45 ) ( 113 ) ( 103 ) ( 32 ) ( 28 ) ( 86 ) ( 36 ) ( 4.5 )P213 4.724 3.937 1.772 5.512 5.118 1.260 1.102 4.449 1.417 .177
( 120 ) ( 100 ) ( 45 ) ( 140 ) ( 130 ) ( 32 ) ( 28 ) ( 113 ) ( 36 ) ( 4.5 )
33
americano cmatic 31-05-2007 9:47 Pagina 33
PV LINE
37_41
42_45
PV 18PV 41PV 21PV 23PV 33PV 26PV 22PV 27
Technical remarks
PV 45PV 46
PV 11-FEPV 11-BE
36_36
PVLI
NE
PV 41PV 18 PV 21 PV 23 PV 33 PV 26 PV 22 PV 27
PV 45 PV 46 PV 11-FE PV 11-BE
americano cmatic 31-05-2007 9:47 Pagina 35
Working pressure Working temperature
from 0 up to 145 psi from 32 °F up to 158 °F
FLOW CONTROLS
C.MATIC flow controls can adjustthe flow in pneumatic circuit or con-trol the speed of a pneumatic cylin-der. Depending on the flow controlversion used, the setting can bemade both ways ( Bidirectional ver-sion), or just one way ( Meter Out orMeter In version). The One way ver-sion is particulary used to adjust thespeed of pneumatic cylinders.
DATA SHEET
Recommended tubing:according to the fitting connected tothe flow control. Application field:pneumatic installations fed with fil-tered, lubricated air.
CONTROLLEDFLOW
…/C = Meter Out …/V = Meter In …/B = Bidirectional
IN
IN FREE FLOW
IN
FREEFLOW
CONTROLLED FLOW IN
IN
CONTROLLEDFLOW
CONTROLLED FLOW IN
FLOW CONTROLS
PV18 PV41
PV21
Body Banjo ring
Brass UNI EN 12164 CW614N Nickel plated Brass UNI EN 12165 CW617N Nickel plated
O-Ring
NBR
Body Adjusting screw, nut and knob
Anodized aluminium Brass UNI EN 12164 CW614N Nickel plated
O-Ring
NBR
Threads SpecificationsThreads Tightening Torque (lb-ft)
10-32 1/8" 3/8" 1/2"
7.376 ÷ 8.8513.688 ÷ 4.425
1/4"
10.326 ÷ 11.8015.901 ÷ 7.376
11.801 ÷ 13.2767.376 ÷ 8.851
13.276 ÷ 14.75111.801 ÷ 13.276
ANSI/ASME B1.20.3ANSI/ASME B1.20.3ANSI/ASME B1.1
NPTF threadsNPTF pre-coated threadsUNF parallel threads with seal 0.738 ÷ 1.106
36
americano cmatic 31-05-2007 9:47 Pagina 36
PV 18
Flow control with swivel push-in fitting PartNumber L2 L3L1D1 UNF Tube OD L4 HEX oz
18 5/32 10-32 5/32 10-32 .196 .590 .708 1.259 3/8( 5 ) ( 15 ) ( 18 ) ( 32 ) ( 9.52 )
PartNumber L2 L3L1D1 NPTFTube OD L4 HEX oz
HEX oz
HEX oz
18 5/32 1/8 5/32 1/8 .334 .866 .787 1.692 9/16 1.164( 8.5 ) ( 22 ) ( 20 ) ( 43 ) ( 14.28 ) ( 33 )
18 1/4 1/8 1/4 1/8 .334 .866 .866 1.692 9/16 1.235( 8.5 ) ( 22 ) ( 22 ) ( 43 ) ( 14.28 ) ( 35 )
18 1/4 1/4 1/4 1/4 .511 1.063 .944 2.007 11/16 2.116( 13 ) ( 27 ) ( 24 ) ( 51 ) ( 17.46 ) ( 60 )
18 5/16 1/8 5/16 1/8 .334 .866 .905 1.692 9/16( 8.5 ) ( 22 ) ( 23 ) ( 43 ) ( 14.28 )
18 5/16 1/4 5/16 1/4 .511 1.063 .944 2.007 11/16 2.152( 13 ) ( 27 ) ( 24 ) ( 51 ) ( 17.46 ) ( 61 )
18 3/8 1/4 3/8 1/4 .511 1.063 1.023 2.007 11/16 2.310( 13 ) ( 27 ) ( 26 ) ( 51 ) ( 17.46 ) ( 65.5 )
Available as:
…/C = Meter Out …/V = Meter In …/B = Bidirectional
PVLI
NE
Available as:
…/C = Meter Out …/V = Meter In …/B = Bidirectional
PV 41
Flow control with swivel push-in fitting and handwheel adjustmentPartNumber L2 L3L1D1 UNF Tube OD L4
41 5/32 10-32 5/32 10-32 .196 .590 .708 1.692 3/8( 5 ) ( 15 ) ( 18 ) ( 43 ) ( 9.52 )
PartNumber L2 L3L1D1 NPTFTube OD L4
41 5/32 1/8 5/32 1/8 .334 .866 .787 2.126 9/16( 8.5 ) ( 22 ) ( 20 ) ( 54 ) ( 14.28 )
41 1/4 1/8 1/4 1/8 .334 .866 .866 2.126 9/16 1.340( 8.5 ) ( 22 ) ( 22 ) ( 54 ) ( 14.28 ) ( 38 )
41 1/4 1/4 1/4 1/4 .511 1.063 .944 2.519 11/16 2.346( 13 ) ( 27 ) ( 24 ) ( 64 ) ( 17.46 ) ( 66.5 )
41 5/16 1/8 5/16 1/8 .334 .866 .905 2.126 9/16( 8.5 ) ( 22 ) ( 23 ) ( 54 ) ( 14.28 )
41 5/16 1/4 5/16 1/4 .511 1.063 .944 2.519 11/16 2.363( 13 ) ( 27 ) ( 24 ) ( 64 ) ( 17.46 ) ( 67 )
41 3/8 1/4 3/8 1/4 .511 1.063 1.023 2.519 11/16 2.469( 13 ) ( 27 ) ( 26 ) ( 64 ) ( 17.46 ) ( 70 )
37
americano cmatic 31-05-2007 9:47 Pagina 37
PV 21
In Line Flow Control - Needle ValveD1 NPTF
PartNumber D3D2 L1 L2 L3 L4 L5 S oz
21 00 18 1/8 .177 .472 .826 2.204 1.338 .944 .315 .629 .590 1.728( 4.5 ) ( 12 ) ( 21 ) ( 56 ) ( 34 ) ( 24 ) ( 8 ) ( 16 ) ( 15 9 ( 49 )
21 00 14 1/4 .255 .708 1.181 2.952 1.968 1.378 .472 .984 .866 5.785( 6.5 ) ( 18 ) ( 30 ) ( 75 ) ( 50 ) ( 35 ) ( 12 ) ( 25 ) ( 22 9 ( 164 )
21 00 38 3/8 .255 .708 1.181 2.952 2.283 1.578 .472 .984 .866( 6.5 ) ( 18 ) ( 30 ) ( 75 ) ( 58 ) ( 40 ) ( 12 ) ( 25 ) ( 22 )
21 00 12 1/2 .255 .866 1.574 3.622 2.559 1.968 .669 1.181 1.023 10.617( 6.5 ) ( 22 ) ( 40 ) ( 92 ) ( 65 ) ( 50 ) ( 17 ) ( 30 ) ( 26 ) ( 301 )
HEX
Available as:
…/U = One way …/B = Bidirectional
38
americano cmatic 31-05-2007 9:47 Pagina 38
Body Spring O-Ring Working temperature Cracking pressure Working pressure
Brass UNI EN 12164 CW614N Nickel plated Stainless Steel AISI 302 NBR from 14°F up to 158°F. 2.9 psi from 29 psi up to 145 psi
CHECK VALVE
The flow is allowed only in one way (thearrow direction engraved on the body)and stopped in the reverse way.
DATA SHEET
Recommended tubingaccording to the fitting connected to thevalve.Application field:Pneumatic installation fed with filtered,lubricated air.
Flow at 87 psi: PV 23 00 18: 33 SCFMPV 23 00 14: 57 SCFMPV 23 00 38: 86 SCFMPV 23 00 12: 124 SCFM
CHECK VALVE
IN
OUT IN
IN
PVLI
NE
23 00 18 1/8 1.496 .511( 38 ) ( 13 )
23 00 14 1/4 1.653 .629( 42 ) ( 16 )
23 00 38 3/8 2.047 .787( 52 ) ( 20 )
23 00 12 1/2 2.440 .944( 62 ) ( 24 )
PV 23
Check Valve
PartNumber L1D1 NPTF HEX oz
33 1/4 1/8 1/4 1/8 .334 1.122 .511( 8.5 ) ( 28.5 ) ( 13 )
33 1/4 1/4 1/4 1/4 .511 1.26 .551( 13 ) ( 32 ) ( 14 )
PV 33
Straight connection with check valve
Meter Out Version
PartNumber L2L1D1 NPTFTube OD HEX oz
OUT IN
39
Meter Out Version
americano cmatic 31-05-2007 9:47 Pagina 39
IN
OUT
OFF
VENTING
Body Sleeve O-Ring Working pressure Working temperature
Brass UNI EN 12164 CW614N Chrome plated Anodized aluminium NBR From 0 up to 217 psi From 14°F up to158°F
SLIDE VALVE
The valve is used to section a pneumaticinstallation. Sliding the sleeve on therod, both ON and OFF positions can beachieved. When the sleeve is against therod hexagon, the flow goes in the arrowdirection (ON); pushing it backwards theair supply is cut off and the installationis vented (OFF)
DATA SHEET
Recommended tubing:according to the fitting connectedto the valve. Application field:pneumatic installation fed with filtered,lubricated air.
SLIDE VALVE
ON
IN
26 1/8 1/8 1/8 .984 1.889 .551 1.764( 25 ) ( 48 ) ( 14 ) ( 50 )
26 1/4 1/4 1/4 1.181 2.283 .669 2.998( 30 ) ( 58 ) ( 17 ) ( 85 )
26 3/8 3/8 3/8 1.378 2.677 .866( 35 ) ( 68 ) ( 22 )
26 1/2 1/2 1/2 1.574 3.149 1.063( 40 ) ( 80 ) ( 27 )
PV 26
Slide valve
PartNumber L1D2D1 NPTF HEX oz
40
americano cmatic 31-05-2007 9:47 Pagina 40
IN
OUTCIRCUITAIR FLOW
VENTING
Body Lip ring Working temperature
Brass UNI EN 12164 CW614N Nickel plated PU from 29 psi up to 145 psi from 14°F up to 158°F
Body Lip ring Gasket
Muffler
Working temperature
Brass UNI EN 12165 CW617N Nickel plated PU PA66
Stainless Steel AISI316
from 29 psi up to 145 psi from 14°F up to 158°F
QUICK EXHAUST VALVE
This valve can easily vent the air flo-wing in the circuit in case of an air sup-ply failure. lf assembled on the cylinderport, it increases the cylinder speed.
DATA SHEET
Recommended tubing:according to the fitting connected tothe valve.
Application field:pneumatic installation fed with fil-tered, lubricated air.
IN
OUT CIRCUITAIR FLOW
VENTING
PV 27PV 22
PV22
PV27
QUICK EXHAUST VALVE
22 1/4 1/4 1/4 1/4 .511 2.087 .708( 13 ) ( 53 ) ( 18 )
22 3/8 3/8 3/8 3/8 .511 2.539 1.063( 13 ) ( 64.5 ) ( 27 )
22 1/2 1/2 1/2 1/2 .669 2.992 1.338( 17 ) ( 76 ) ( 34 )
PV 22In Line Quick Exhaust valve
PartNumber L2L1D1 NPTFTube OD HEX oz
27 1/8 1/8 1/8 1.062 1.653 .590 3.351( 27 ) ( 42 ) ( 15 ) ( 95 )
27 1/4 1/4 1/4 1.377 2.125 .748 5.573( 35 ) ( 54 ) ( 19 ) ( 158 )
27 3/8 3/8 3/8 1.377 2.165 .826 5.644( 35 ) ( 55 ) ( 21 ) ( 160 )
27 1/2 1/2 1/2 1.771 2.834 1.023 11.464( 45 ) ( 72 ) ( 26 ) ( 325 )
PV 27Quick Exhaust valve
PartNumber L2L1D1 NPTF HEX oz
PVLI
NE41
Working pressure
Working pressure
americano cmatic 31-05-2007 9:47 Pagina 41
Body Piston Spring O-Ring Working pressure Working temperature
Brass UNI EN 12164 CW614N Nickel plated Stainless Steel AISI 304 Stainless Steel AISI 302 NBR-PU 29 psi to 145 psi 23°F to 158°F
PILOT OPERATED CHECK VALVE
The Pilot Operated check valve allowsthe flow only when a pilot signal isapplied to the pilot port; if assembledin pair on the cylinder ports, in caseof sudden pressure drops the pilotOpereted Check Valve immediatlystops the cylinder piston stroke.
DATA SHEET
Recommended tubing:according to the fitting connected tothe pilot operated check valve. Application field:pneumatic circuits fed with filtered,lubricated air.
PILOT OPERATED CHECK VALVE
A A A
BB
A
B
A
B
PILOT PRESSURE (P)
PILOT PRESSURE (P)/B = Bidirectional
/U = One Way
42
americano cmatic 31-05-2007 9:47 Pagina 42
PV 45
45 1/4 1/8 1/4 1/8 10-32 .334 .689 1.692 .511( 8.5 ) ( 17.5 ) ( 43 ) ( 13 )
45 1/4 1/4 1/4 1/4 10-32 .511 .918 1.969 .669( 13 ) ( 23.5 ) ( 50 ) ( 17 )
45 3/8 3/8 3/8 3/8 1/8 .511 .984 2.224 .787( 13 ) ( 25 ) ( 56.5 ) ( 20 )
45 1/2 1/2 1/2 1/2 1/8 .669 1.22 2.657 .984( 17 ) ( 31 ) ( 67.5 ) ( 25 )
Piloted Operated Check valve
PartNumber L3L2L1D2D1 NPTFTube OD HEX oz
PVLI
NE
Available as:
…/U = One way …/B = Bidirectional
43
americano cmatic 31-05-2007 9:47 Pagina 43
2 WAYS
3 WAYS
PNEUMATIC SWITCH
The PV 46 is a pneumatic switch. It isavailable in a 2/2 and 3/2-way version.The goal of the 2/2 way switch is to cutoff the flow in the circuit whenever nee-ded by simply operating the lever. The 3/2way valve cuts off the flow and vents toatmosphere the terminal part of the circuit
DATA SHEET
Recommended tubing:according to the fitting connectedto the pressure control.Application field:pneumatic circuits fed with filtered, lubri-cated air.
Pneumatic switch Spring
Brass UNI EN 12164 CW614N Nickel plated Stainless Steel AISI 302
O-Ring
NBR
Working pressure
0 psi to 217 psi
Working temperature
14°F to 158°F
Flow rate at 87 psi
PV 46 1/4 1/8: 21.5 SCFMPV 46 1/4 1/4: 30 SCFM
PNEUMATIC SWITCH
IN IN
OUT
ON OFF2/2
46 1/4 1/8 1/4 1/8 .335 .669 2.165 .551 .59( 8.5 ) ( 17 ) ( 55 ) ( 14 ) ( 15 )
46 1/4 1/4 1/4 1/4 .511 .886 2.441 .669 .59( 13 ) ( 22.5 ) ( 62 ) ( 17 ) ( 15 )
PV 46
Pneumatic switch
PartNumber L3L2L1D1 NPTFTube OD HEX1 HEX2 oz
IN OUT IN
ON OFF3/2
VENTING
44
americano cmatic 31-05-2007 9:47 Pagina 44
Body Muffler
Brass UNI EN 12164 CW614N Nickel plated Stainless Steel AISI 304 0 psi to 174 psiPV11-FE
PV11-BE Brass UNI EN 12164 CW614N Sintered bronze 0 psi to 174 psi 14°F to 158°F
Working temperature
14°F to 158°F
MUFFLERWorking pressure
11 00 18-FE 1/8 .236 .59 .511( 6 ) ( 15 ) ( 13 )
11 00 14-FE 1/4 .433 .866 .63( 11 ) ( 22 ) ( 16 )
11 00 38-FE 3/8 .433 .905 .748( 11 ) ( 23 ) ( 19 )
11 00 12-FE 1/2 .511 .984 .945( 13 ) ( 25 ) ( 24 )
PV 11-FE
Air muffler with stainless steel wire
PartNumber L2L1D1 NPTF HEX oz
11 00 18-BE 1/8 .236 1.142 .511( 6 ) ( 29 ) ( 13 )
11 00 14-BE 1/4 .433 1.417 .63( 11 ) ( 36 ) ( 16 )
11 00 38-BE 3/8 .433 1.693 .748( 11 ) ( 43 ) ( 19 )
11 00 12-BE 1/2 .511 1.929 .945( 13 ) ( 49 ) ( 24 )
PV 11-BE
Sintered bronze air muffler
PartNumber L2L1D1 NPTF HEX oz
PVLI
NE
3/81/41/8 1/2Type
PV11 -FE 74 dB 72 dB 88 dB 90 dBPV11 -BE 75 dB 81 dB 82 dB 85 dB
Noise level at 87 psiType
PV11 -FE 100-200 µmPV11 -BE 35 µm
Filtration threshold
45
americano cmatic 31-05-2007 9:47 Pagina 45
The following General Conditions shall apply to Sale Transactionsbetween the Seller and the Buyer, unless differently stated. The fol-lowing General Conditions represent the sole and complete agree-ment between the Seller and the Buyer and, therefore, modifica-tions of or deviation from them must be agreed in writing.Wherever these General Conditions use the term “in writing”, thisshall mean by document signed by the parties or by letter, fax or e-mail.
1. ACCEPTANCE OF THE GENERAL CONDITIONS OF SALE1.1 The Parties acknowledge and agree to consider these GeneralConditions of Sale to be essential.1.2 The Buyer acknowledges and agrees that placing an orderimplies complete acceptance without reservation of these generalconditions of sale.
2. ORDERS AND ORDERS CONFIRMATION 2.1 Any order from the Buyer shall be in writing and shall be bin-ding for the Seller, only when accepted in writing by the Seller withthe Order Confirmation. Verbal or telephoned orders and any oralmodification of orders must be confirmed in writing by the Buyerwithin 2 working days from the transmission of the order.
3. LITERATURE3.1 Except for the General Conditions of Sale as indicated underprevious Article 1.3, catalogues or other advertising materials areto be deemed as only an indication of the type of products. Anyinformation therein contained should be considered as a recom-mendation only and not a guarantee. 3.2 All designs, dimensions and performances of C.MATIC’s pro-ducts as described in the Company’s catalogues may be subject tomodifications and/or improvements due to C.MATIC’s policy ofupgrading products on an ongoing basis.
4. DELIVERY AND TRANSFER OF RISKS4.1 The time of the delivery stated in our Order Confirmation is notto be considered as binding. 4.2 The Seller shall, however, to the best of his ability, observe thetime of delivery indicated in the Order Confirmation. If the Sellerexpects that He will be unable to deliver the products at the dateindicated in the Order Confirmation, He must inform the Buyer inwriting within the shortest delay stating, as far as possible, theestimated date of delivery. However, the delays shall not entitle theBuyer to claim compensation for damages, to delay payments or tocancel orders.4.3 In particular, any delay caused by force majeure or by acts oromissions of the Buyer shall not be considered as a delay for whichthe Seller is responsible.4.4 Unless otherwise stated by the parties, the delivery of the pro-ducts shall be EX WORKS (ICC Incoterms 2000 EXW). In this casethe Seller will have fulfilled his obligations to deliver when he shallhave made the goods available at the premises to the Buyer. In par-ticular, he is not responsible for loading the goods on the vehicleprovided by the Buyer or for clearing the goods for export, unlessotherwise agreed. The Buyer bears all costs and risks involved intaking the goods from the Seller’s premises to the chosen destina-tion, included the insurance costs.
5. PACKAGING5.1 C.MATIC’s components are packed in cardboard boxes, suitablefor transit and free of cost. No other alternative package is availa-ble. Special packaging requests must be agreed with C.MATIC inwriting.
6. DESPATCH EXACTNESS6.1 If Seller is responsible for any mistake in interpretation oforders and packaging, it shall undertake to correct His mistakes assoon as possible. 6.2 Seller is not supposed to accept back components ordered bymistake by the customers and only when agreed, credit will be rai-sed to correspond to 60% off the price paid by the customer.
7. PRICES - PAYMENTS7.1 The prices of the products shall be those indicated, from time totime, in the Seller’s price list, known by the Buyer. Seller reservesthe right to periodically vary the prices of the products. The varia-tions shall be effective for the Buyer after 2 months from theSeller written notice transmission 7.2 In case of scheduled orders or sales in separated deliveries, ifthe price variations are determined by events independent from theSeller’s control (as for example, increase of the costs of the rawmaterials, increase of the employment costs etc…) such variations,shall be effective for the Buyer as regards the deliveries still to bemade by the Seller, 60 days after Seller ‘s written notice . 7.3 All amounts owed by the Buyer should be settled on the statedinvoice expiration day. If no payment is received by the invoiceexpiration date, interest charges are automatically applied. Theinterest rate is based on the European Central Bank interest rate,valid at the time, and increased by 7 %.7.4 Seller reserves the right to stop any order or consignment if thepayment of the Products is delayed by the Buyer. These conditionsare to be understood valid to all intents and purposes, if no agree-ment is entered into between the Seller and the Buyer.
8. COSTS8.1 Any and all taxes, levies, testing costs [at the entrance], tran-sportation costs of the products from the Seller’s warehouse todestination, currency fluctuation and in general any and all presentand /or future costs in connection with the contract are to be borneby the Buyer.
9. COMPLAINTS9.1 The Buyer shall inform the Seller of any complaints related topacking, quantity, number or exterior features of the Products, inwriting, within 10 days from delivery of the Products. Failing suchnotification the Buyer’s right to claim the above defects shall be for-feited.9.2 Complaints regarding hidden defects which cannot be discove-red on the basis of a careful inspection upon delivery of theProducts, shall be notified in writing to the Seller, within 30 wor-king days from the discovery of the defects. Failing such notifica-tion the Buyer’s right to claim the above defects shall be forfeited.9.3 In case the Buyer will timely make its complaints, the Sellermay alternatively (i) repair or (ii) substitute the defective products.On receipt of the complaint, C.MATIC reserve the right to requestsamples for evaluation.
9.4 Pending a complaint, the Buyer will have no right to suspend ordelay the payments of the defective Products, nor of different sup-plies. Any right of termination of the agreement by the Buyer is alsoexcluded.
10. WARRANTY – LIMITATION OF LIABILITY10.1 The Seller represents and warrants to the Buyer that theProducts shall meet the Product specification for a period of 12months from the date of the delivery to the Buyer.10.2 The Buyer will loose his right to enforce the warranty if hedoes not notify to the Seller the defects of the products within theterms indicated in article 9 . 10.3 The warranty is excluded in case of (i) use of the productsinconsistent with their technical specifications, (ii) damages causedto the products for reasons not attributable to the Seller.10.4 In case the Buyer incurs in a loss or damage due to defectiveproducts, except in case of fraud or gross negligence of the Seller,the Seller’s liability and, consequently, the compensation of the duedamages shall not exceed the value of the defective products;10.5 For any loss or damage suffered by the Buyer for (but not limi-ted to) lack of fulfillment of his obligations, penalties for delayeddeliveries to customers, and for any other damage, penalty or reim-bursement due in connection with the commercial relationship bet-ween the Buyer and His customers, the liability of the Seller shallbe limited to the value of the defective products.
11. GOVERNING LAW AND JURISDICTION11.1 These General Conditions shall be governed by the Laws ofItaly, excluding the application of the Vienna Convention on theInternational Sales of Goods.11.2 All disputes arising out of the present contract, including thoseconcerning its validity, interpretation, performance and termination,shall be referred to an arbitrator, according to the InternationalArbitration rules of the Chamber of National and InternationalArbitration of Milan which the parties declare to accept in theirentirety. The seat of the arbitration shall be Milan. The language ofthe arbitration shall be English.
C.MATIC reserve the right to change without notice the information contained in this catalogue.
CONDITIONS OF SALEGENERAL
americano cmatic 31-05-2007 9:47 Pagina 47
Project byMarker ADV - Giussano (MI) Italy
Printing bySarigraphic - Seregno (MI) Italy
2007
americano cmatic 31-05-2007 9:47 Pagina 48