2004 product catalog - bellin dynamic systems · pdf filebellin dynamic systems, inc. 211 s...

2004 Product Catalog

- Rapid Development Solutions for the Technical Professional -

Bellin Dynamic Systems, Inc. 211 S State College #319 Anaheim California 92806 (714) 630-8024 (714) 630-8025 fax www.beldynsys.com Updated August 2004

Bellin Dynamic Systems, Inc. 211 S State College #319 Anaheim California 92806

Voice: (714) 630-8024 Fax: (714) 630-8025 www.beldynsys.com

2

Table of Contents Snap-ApartTM Series: Kits K900 Five Piece Prototyping Kit for Projects……………….. pg 3 K910 Ten Piece Prototyping Kit for Labs……………………. pg 4

Small Components P502 Small SMT Parts and Modules………………………… pg 5 P513 Small SMT, 150 Adapters…….………………………… pg 6

SOIC P505 SOIC Prototyping Adapters……………………………. pg 7 P510 140 SO8 Adapters……………………………………… pg 8 P511 SOIC to DIP .300” Adapters…………………………… pg 9

Fine Pitch IC P503 Two Row, SOIC/QSOP/MSOP/TSOP/TSSOP……… pg 10 P507 SSOP/TSSOP Adapters……………………………….. pg 11 P516 .65 mm SSOP/TSSOP to DIP Adapters……………… pg 12 P517 SSOP/TSSOP 48 to DIP Adapters……………………. pg 13

Quad: QFP, PLCC P504 QFP, TQFP and PLCC………………………………… pg 14 P512 PLCC ………………….………………………………… pg 15

P518 QFP, TQFP 32-256 pin .65mm / .8mm Pitch………... pg 16 P519 QFP, TQFP 32-256 pin .4mm / .5mm Pitch…………. pg 17

QuadPacks 3-Packs, QFP, TQFP or PLCC Adapters……………. pg 18

PitchSticksTM P508 Metric and rare SMT pitch spacing variety…………… pg 23 P509 50 and 25 mil SMT pitch spacing……………………… pg 24

Connectors P501 DB9, DB15, DB15HD, DB25 and more to .100……… pg 23 P506 USB, RJ11, RJ12, 1394 and DB9 to .100”…………… pg 24

Prototyping Essentials:

Proto Boards P500 Proto Board with Regulation, “Star Gnd” Areas……… pg 27 B500-3P Proto Board 3-Pack……………………………...……… pg 28 Pins PinPacks 40 Pin SIP…80 Pin Dual Headers, Sockets…………. pg 29 Parts P501-SP Selected Parts for P501………………………………... pg 30

P502-SP Selected Parts for P502………………………………... pg 31

Modular Case Series: M100-M108 Inserts: Blank, Holes, DB, Term. Blk, DC Conn……… pg 32 M201 Covers and Fasteners, Modular Case………………… pg 33 M202 End Panels, Modular Case …………………………….. pg 33 M400 Polycarbonate Labels…………………………………… pg 34 K901 Modular Case Kit……………………………………....... pg 35

Index Product Index……………………………………................................ pg 37

SNAP-APARTTM SERIES: KITS



3

K900 “Lab Lightning” Snap-Apart Kit

Included:

One each, P500, P501, P502, P503, P504.

Faster development, less frustration.

Eliminate one or more circuit board revisions from your design process. Eliminate further delays and shipping expenses in the future by having a wide assortment of SMT patterns readily available.

Make prototypes more robust and less fragile, using the proper SMT land patterns and pin strip header connections.

SNAP-APARTTM SERIES: KITS



4

K910 “Lab Pro 10” Snap-Apart Kit

Included: Two each, P502, P503, P504, P505, P507. 334 Snap-Apart elements, most with SMT patterns on both sides. This is a kit for world-class professional electronics laboratories. It is designed to compress development schedules while reducing SMT-induced frustration. The expense of this kit may be minor compared to the recovered engineering hours and reduced board revisions during product development.

SNAP-APARTTM SERIES: SMALL SMT



5

P502 Snap-Apart : Small SMT + Modules

160 SMT patterns front/back, on 70 Snap-Apart elements plus 12 chip modules. 5” x 7.6” grooved PCB, .031” thick for easy modification and placement.

Included; Four 40 pin header strips, two 40 pin right angle header strips. Pattern Types: SOT23 SC75A SC90 SOT323 SC70 SC353 SC88A SOT363 SC88 SOT89 SC62 TO243 SOT223 SC73 TO261 CAP A,B,C,D TO236 SOT143 TO253 SOT25 SC74A SOT26 SC74 MSOP8 DPAK TO252 MSOP10 D2PAK TO263 TSOP8 TSOP6 SO8 D3PAK TO268 SO14 SO16, Also accommodates many manufacturer-specific packages not listed here. Modules include: Two patterns for RS-232 to TTL that fit MAX232A and five .1uF 0805 caps; Two generic SO14 quad op-amp patterns with spots for surface mount input and feedback components on all four op-amps; Two patterns for 78XX linear regulators, and capacitors; Two patterns for 79XX linear regulators, and capacitors; Two patterns for LM317 linear regulators, and capacitors, resistors; Two patterns for LM337 linear regulators, and capacitors, resistors

SNAP-APARTTM SERIES: SMALL SMT



6

P513 Snap-Apart : Small SMT

300 SMT patterns on 150 Snap-Apart elements. 5” x 7.6” grooved PCB, .031” thick. All compatible with DIP .300” sockets.

Included; Six 40 pin header strips. We designed this one to make your technical life significantly easier for a long, long time. Literally hundreds of SMT patterns wipe out the expense of individual adapters, and tiresome searches for the correct adapter pattern and part number. Not to mention shipping… 10 each, SC75A/SC90 (front), SOT23/TO236 (back) 10 each, SOT23/TO236 (front), SOT143/TO263 (back) 10 each, SOT323/SC70 (front), SC75A/SC90 (back) 20 each, SOT363/SC88 (front), SOT26/SC74 (back) (& SOT353/SC88A/SOT25/SC74A)

20 each, SOT26/SC74 (front), SOT363/SC88 (back) (& SOT353/SC88A/SOT25/SC74A)

20 each, TSOP8/TSOP6 (front), 805 pads x 4 (back) 25 each, MSOP8 (front), MSOP10 (back) 25 each, MSOP10 (front), MSOP8 (back)

SNAP-APARTTM SERIES: SOIC



7

P505 Snap-Apart : SOIC SMT

60 SMT patterns front/back on 42 Snap Apart Elements. 5” x 7.6” grooved PCB, .031” thick for easy modification and placement. Included: Six 40 pin header strips. Pattern Types: SO8, SO8+Decoupling 805 for logic or op-amp, SO8 to 8 pin DIP, SO8+Through Holes Proto SO8+Assorted SMT Proto, SO8+Shield Plane, SO14, SO16, SO14+Through Holes Proto, SO16+Through Holes Proto, SO14+Assorted SMT Proto (Style 1) SO16+Assorted SMT Proto (Style 1), SO14+Assorted SMT Proto (Style 2) SO16+Assorted SMT Proto (Style 2), SO20+805, SO24+805, SO32+805, SO40+805 Accommodates both Narrow and Wide SOIC packages.




8

P510 Snap-Apart: SO8 to DIP, 140 Patterns

140 SMT patterns, on 140 Snap-Apart elements. 5” x 7.6” grooved PCB, .031” thick.

Included: Six 40 pin header strips. For more pin strips or sockets, see our Pin Packs selection. Pattern Types: SO8 to .100" pin spacing, .300" between rows.




9

P511 Snap-Apart : SOIC to DIP

119 SMT patterns, on 63 Snap-Apart elements. 5” x 7.6” grooved PCB, .031” thick.

Included: Six 40 pin header strips. Pattern Types: SO8, SO14, SO16, SO18, SO20 to .100" pin spacing, .300" between rows.

Accommodates wide patterns also.

SNAP-APARTTM SERIES: FINE PITCH IC



10

P503 Snap-Apart : 2 Row SMT + Adapters

34 SMT patterns front/back, 3 DIP adapters, on 40 Snap-Apart elements. 5” x 7.6” grooved PCB, .031” thick for easy modification and placement. Included: Three 40 pin header strips, Two 40 pin right angle header strips, one 80 pin right angle header strip. Pattern Types: Patterns up to 40 pins accommodate lower pin counts and wide packages. SO8/14/16/20/32/40 Q/SSOP16/20/24/32 TSOP6/8 MSOP8/10 TSOP1-28/32 TSSOP40(.4mm, .5mm, .65mm pitch) Pin Adapters allow conversion to .300” or .600” DIP sockets for many elements. It is also possible to ‘stand up’ a wide part, such that it only takes up as much room as a dual row header, thereby saving a lot of space.




11

P507 Snap-Apart : SSOP/TSSOP

40 SMT patterns front/back, on 20 Snap-Apart elements. 5” x 7.6” grooved PCB, .031” thick for easy modification and placement.

Included: Six 40 pin header strips. Pattern Types:

SSOP16/TSSOP16 .4mm, .5mm, .65mm SSOP20/TSSOP20 .4mm, .5mm, .65mm SSOP32/TSSOP32 .4mm, .5mm, .65mm SSOP40/TSSOP40 .4mm, .5mm, .65mm SSOP20/TSSOP20 .5mm, .65mm with typical SMT discrete patterns for prototyping




12

P516 Snap-Apart : .65mm TSSOP to DIP

54 SMT patterns, on 54 Snap-Apart elements. 5” x 7.6” grooved PCB, .031” thick for easy modification and placement.

Included: Six 40 pin header strips. NOTE: .65mm lead pitch only! Verify your component has this pitch. Pattern Types:

SSOP14/TSSOP14 .65mm to DIP .300” SSOP16/TSSOP16 .65mm to DIP .300” SSOP20/TSSOP20 .65mm to DIP .600” SSOP28/TSSOP28 .65mm to DIP .600”




13

P517 Snap-Apart : SSOP/TSSOP 48 to DIP

18 SMT patterns, on 18 Snap-Apart elements. 5” x 7.6” grooved PCB, .031” thick for easy modification and placement.

Included: Six 40 pin header strips. A very versatile pattern for larger SSOP and TSSOP components. Pattern Types: SSOP48/TSSOP48 .4mm to DIP .600” SSOP48/TSSOP48 .5mm to DIP .600” SSOP48/TSSOP48 .65mm to DIP .600”

SNAP-APARTTM SERIES: QUAD



14

P504 Snap-Apart : Quad SMT

25 SMT patterns front/back on 20 Snap Apart Elements. 5” x 7.6” grooved PCB, .031” thick for easy modification and placement. Included: Three 40 pin header strips, Three 80 pin header strips. Pattern Types: PLCC/LCC 50 mil pitch: 18RJL 20 22RJ 28 28RJ 32RJ 44 QFP pins(mm pitch): 44(.8) 48(.8) 52(1) 54(.65) 64(1) 70(.8) 80(.8) 100(.65) 100A(.65) TQFP pins(mm pitch): 32(.5) 48(.5) 52(.65) 64(.4) 64(.5) 80(.4) 80(.5) 80(.65) 100(.5)




15

P512 Snap-Apart : PLCC

Accommodates 90 PLCC patterns on 12 Snap-Apart™ elements. 5” x 7.6” grooved PCB, .031” thick. A good mix increases the chance that you get enough of the pattern you need. Included: Three 40 pin header strips, Three 80 pin header strips. Pattern Types: 1 each, PLCC 18R, 18RJ, 30, 28; both sides 3 each, PLCC 22RJ, 28, 32R (front); 20, 28R (back) 2 each, PLCC 28, 44, 52, 68; both sides 3 each, PLCC 28, 44, 52, 68; both sides, with test points 3 each, PLCC 44, 52, 68, 84, 100; both sides




16

P518 Snap-Apart: Universal Quad (.65mm / .8mm Pitch)

Two adapters for QFP / TQFP. Each has .65mm pitch and .8mm pitch pads. (that means that you can adapt two .65mm parts or two .8mm parts with this one board) 5” x 7.6” grooved PCB, .031” thick. Designed to fit any square quad package from 32 to 256 pins. Included: Eight 80 pin header strips. Pin counts supported (even number of pins per side): 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120, 128, 136, 144, 152, 160, 168, 176, 184, 192, 200, 208, 216, 224, 232, 240, 248, 256

Note that the adapter perfectly matches parts having an even number of pins per side. (Example – a 32 pin part has 8 pins on its four sides)

But that does not prevent it from working with parts having an odd number of pins per side. For instance, if you have a 100 pin QFP (25 pins on each of four sides) the pads will still match up if you offset the part a little. In this way, the following pin counts are supported:

Pin counts supported (odd number of pins per side): 36, 44, 52, 60, 68, 76, 84, 92, 100, 108, 116, 124, 132, 140, 148, 156, 164, 172, 180, 188, 196, 204, 212, 220, 228, 236, 244, 252




17

P519 Snap-Apart: Universal Quad (.4mm / .5mm Pitch)

Two adapters for QFP / TQFP. Each has .4mm pitch and .5mm pitch pads. (that means that you can adapt two .4mm parts or two .5mm parts with this one board) 5” x 7.6” grooved PCB, .031” thick. Designed to fit any square quad package from 32 to 256 pins. Included: Eight 80 pin header strips. Pin counts supported (even number of pins per side): 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120, 128, 136, 144, 152, 160, 168, 176, 184, 192, 200, 208, 216, 224, 232, 240, 248, 256

Note that the adapter perfectly matches parts having an even number of pins per side. (Example – a 32 pin part has 8 pins on its four sides)

But that does not prevent it from working with parts having an odd number of pins per side. For instance, if you have a 100 pin QFP (25 pins on each of four sides) the pads will still match up if you offset the part a little. In this way, the following pin counts are supported:

Pin counts supported (odd number of pins per side): 36, 44, 52, 60, 68, 76, 84, 92, 100, 108, 116, 124, 132, 140, 148, 156, 164, 172, 180, 188, 196, 204, 212, 220, 228, 236, 244, 252




18

QuadPacks: 3 piece packs of QFP, TQFP, & more. Cross-Reference Part List by number of pins:

Pins on Part Option 1 Option 2 Option 3 18 pins Q20-18 20 pins Q20-18 Q22-20 Q20x2 22 pins Q22-20 28 pins Q28-32 Q28x1 32 pins Q28-32 Q32-28 44 pins Q48-44 Q54-44 48 pins Q48-44 Q52-48 52 pins Q52-48 Q64-52 54 pins Q54-44 64 pins Q64-52 Q64-64 70 pins Q70-80 80 pins Q70-80 Q80-80 Q100-80 100 pins Q100-80 Q100-100

Detailed List of Patterns and Pin Pitches on each QuadPack: Part No. Pattern on Front Pattern on Back Number in Pack Q20-18 Front: PLCC 20, 50 mil pitch. Back: PLCC 18RJL, 50 mil pitch. 3 Q20x2 Front: Two PLCC 28, 50 mil pitch Back: None 3 Q22-20 Front: PLCC 22RJ, 50 mil pitch. Back: PLCC 20RJL, 50 mil pitch. 3 Q28-32 Front: PLCC 28, 50 mil pitch. Back: TQFP32, .5mm pitch. 3 Q28x1 Front: PLCC 28, 50 mil pitch. Back: None 3 Q32-28 Front: PLCC 32RJ, 50 mil pitch. Back: PLCC 28RJ, 50 mil pitch. 3 Q48-44 Front: QFP48, .8mm pitch. Back: QFP44, .8mm pitch. 3 Q52-48 Front: TQFP52, .65mm pitch. Back: TQFP48, .5mm pitch. 3 Q54-44 Front: QFP54, .65mm pitch. Back: PLCC 44, 50 mil pitch. 3 Q64-52 Front: QFP64, 1mm pitch. Back: QFP52, 1mm pitch. 3 Q64-64 Front: TQFP64, .5mm pitch. Back: QFP64, .4mm pitch. 3 Q70-80 Front: TQFP70, .8mm pitch. Back: TQFP80, .8mm pitch. 3 Q80-80 Front: TQFP80, .65mm pitch. Back: TQFP80, .4mm pitch. 3 Q100-80 Front: TQFP100, .5mm pitch. Back: TQFP80, .5mm pitch. 3 Q100-100 Front: TQFP100A, .65mm pitch. Back: TQFP100, .65mm pitch. 3 All QuadPack patterns can be found on the P504 Snap-ApartTM Board. The P504 Data Sheet may be used for a fit check. For header pins or sockets, see PinPacks.




19

QuadPacks

Q20-18 Q20x2

Front: PLCC 20, 50 mil pitch. Front: Two PLCC 28, 50 mil pitch Back: PLCC 18RJL, 50 mil pitch. 3 included in each Q20x2 pack. 3 included in each Q20-18 pack.

Q22-20 Q28-32

Front: PLCC 22RJ, 50 mil pitch. Front: PLCC 28, 50 mil pitch. Back: PLCC 20RJL, 50 mil pitch. Back: TQFP32, .5mm pitch. 3 included in each Q20-18 pack. 3 included in each Q28-32 pack.

Q28x1 Q32-28

Front: PLCC 28, 50 mil pitch. Front: PLCC 32RJ, 50 mil pitch. 3 included in each Q28x1 pack. Back: PLCC 28RJ, 50 mil pitch. 3 included in each Q32-28 pack.




20

QuadPacks

Q48-44

Front: QFP48, .8mm pitch. Back: QFP44, .8mm pitch. 3 included in each Q48-44 pack.

Q52-48

Front: TQFP52, .65mm pitch. Back: TQFP48, .5mm pitch. 3 included in each Q52-48 pack.

Q54-44

Front: QFP54, .65mm pitch. Back: PLCC 44, 50 mil pitch. 3 included in each Q54-44 pack.




21

QuadPacks

Q64-52

Front: QFP64, 1mm pitch. Back: QFP52, 1mm pitch. 3 included in each Q64-52 pack.

Q64-64


Q70-80





22

QuadPacks

Q80-80


Q100-80


Q100-100

Front: TQFP100A, .65mm pitch. Back: TQFP100, .65mm pitch. 3 included in each Q100-100 pack.

SNAP-APARTTM SERIES: CONNECTORS



23

P508: PitchSticks Metric-Plus

The immediate solution to problems caused by fine-pitch parts. Good for many IC's, connectors, displays, or anything with a fine pitch. Snap it apart for elements like these:

Twenty 48-pad pitch patterns front/back, on ten Snap-Apart elements. 5” x 7.6” grooved PCB, .031” thick for easy modification and placement.

Included: Six 40 pin header strips. Pitch Spacings: 2 x 2mm (approx. 78.74 mil) 2 x 70 mil (exactly 1.778mm) 2 x 1.5mm (approx. 59.06 mil) 2 x 1mm (approx. 39.37 mil) 2 x .8mm (approx. 31.50 mil) 2 x 30 mil (exactly .762mm) 2 x .75mm (approx. 29.53 mil) 2 x .65mm (approx. 25.59 mil) 2 x .5mm (approx. 19.69 mil) 2 x .4mm (approx. 15.75 mil)




24

P509: PitchSticks 50 and 25 mil

The immediate solution to problems caused by 50 and 25 mil pitch parts. Good for many IC's, connectors, displays, or anything with 50 or 25 mil pitch. Snap it apart for elements like these:

Eighteen 48-pad, four 96-pad pitch patterns front/back, on ten Snap-Apart elements. 5” x 7.6” grooved PCB, .031” thick for easy modification and placement.

Included: Six 40 pin header strips. Pitch Spacings: 12 x 50 mil (exactly 1.27mm) 8 x 25 mil (exactly .635mm)




25

P501 Snap-Apart : Connectors

20 Snap-Apart elements, 8 useful through-hole patterns. 5” x 7.6” grooved PCB, .062” thick for robust connector life. Included: Two 40 pin header strips, one 80 pin dual row header strip, one 80 pin right angle dual row header strip.

Adapts DB9/15/15HD/25, DC power conn, Terminal blocks to .100”. Use individually, or mate to panel inserts M104-M108 for extremely rapid prototyping. DB9 M/F patterns on reverse sides with either dual row or sip adapter spacing. Common TXD/RXD/COMMON pins separated out on a second 3 pin header for 3-wire serial communication or data monitoring with ease. DB15HD M/F patterns on reverse sides in either pin-for-pin or computer video style signal breakouts.

DB15 standard M/F patterns on reverse sides with either dual row or sip adapter spacing. DB25 M/F patterns on reverse sides with the additional 3 pin header for 3-wire serial communication or data monitoring. Screw type terminal blocks on removable headers from Phoenix Contact fit the terminal block element, and break out to .100” spacing headers on the back. White patches allow signal labeling from both sides. Mates with M107 Insert Plate. DC PCB mount power connector and plug from Switchcraft fit the DC power connector Snap-Apart� element. Header locations for DC power connector pins, fuse, and power output are available. White silkscreen patches allow for labeling. Mates with M108 Insert Plate.




26

P506 Snap-Apart : USB 1394 RJ11/12/45 DB9

55 Connector patterns and 9 terminal/test patterns on 54 Snap Apart Elements. 5” x 7.6” grooved PCB, .062” thick to minimize flex often associated with connectors.

Included: Six 40 pin header strips.

Pattern Types: 4 Position Mod. Jack, 6 Position Mod. Jack (fits RJ11 and RJ12), 8 Position Mod. Jack (Fits RJ45), DB9F, DB9M (back side of DB9F), USB A Connector, USB A Connector (Upright), USB B Connector, 1394 4 Pin Connector, 1394 6 Pin Connector, 805 Component Termination Pads, 805 Component Test Pads. Type and example part number of compatible PCB Connectors: DB9M, Tyco/Amp 747840-4 DB9F, Tyco/Amp 747844-4 MODULAR 4 PIN, Molex 15-43-8544 MODULAR 6 PIN, Molex 15-43- �8566 (RJ11, RJ12 ) MODULAR 8 PIN, Molex 15-43-8588 (RJ45) USB A, Molex 87531-0018 USB A UPRIGHT, Molex 89485-0000 USB B, Molex 67068-0001 1394 4 PIN, Molex 54030-0490 1394 6 PIN, Molex 53460-0611 NOTE: IF YOU ARE UNFAMILIAR WITH HIGH SPEED SERIAL DATA TRANSMISSION: Please be aware that the prototyping environment does not meet full specifications for most high speed serial data transfer. However, it is possible to trade range and/or bandwidth for basic functionality in a prototyping environment. Your data rate and range will vary according to the characteristics of your particular setup. You may find that many popular electronic devices also do not meet full spec, such as when it is unlikely that the maximum number of USB devices would be used.

PROTOTYPING ESSENTIALS



27

P500 Development Board

5” x 7.6” PCB, .062” thick. Included: 4 adhesive-backed nylon standoffs for permanent mounting, Two 40 pin header strips, two 36 pin socket strips. Six slots for DC regulators, or P502’s DC regulation modules. “Star Ground” point for non-isolated supplies. Neat, clean layout reduces accidental ground loop problems and noise issues. Some traces with white labeling areas are available for easy power distribution. Mark your referencing requirements: Chassis, Earth, or Circuit Common. Extra mounting holes for stacking development boards with spacers, if necessary. Use with your growing personal library of Snap-Apart chip modules.




28

B500-3P Board 3-Pack

x 3 5” x 7.6” PCB, .062” thick. Three of our #500 development board only, no hardware. Six slots for DC regulators, or P502’s DC regulation modules. “Star Ground” point for non-isolated supplies. Neat, clean layout reduces accidental ground loop problems and noise issues. Some traces with white labeling areas are available for easy power distribution.

Mark your referencing requirements: Chassis, Earth, or Circuit Common. Extra mounting holes for stacking development boards with spacers, if necessary. Use with your growing personal library of Snap-Apart chip modules




29

PinPacks C800

x 20 Twenty Single Inline Pin Headers, .100" spacing, 40 pins each.

C801

x 20 Twenty Single Inline Right Angle Pin Headers, .100" spacing, 40 pins each.

C802

x 10 Ten Dual Inline Pin Headers, .100" spacing, 80 pins each.

C803

x 10 Ten Dual Inline Right Angle Pin Headers, .100" spacing, 80 pins each.

C804

x 10 Ten Single Inline Sockets, .100" spacing, 36 pins each.

C805 Multi-Pack: 10 x Single Inline Pin Headers, .100" spacing, 40 pins each. 10 x Single Inline Right Angle Pin Headers, .100" spacing, 40 pins each. 5 x Dual Inline Pin Headers, .100" spacing, 80 pins each. 5 x Dual Inline Right Angle Pin Headers, .100" spacing, 80 pins each. 5 x Single Inline Sockets, .100" spacing, 36 pins each.




30

P501-SP Selected Parts for P501

Stuffs all screw-type terminal blocks, headers, DC power connectors. Finest parts available, from Switchcraft and Phoenix Contact. Included: (2) Terminal Block Header, 2 Position: Phoenix Contact # 1843606 MCV 1.5/2-G-3.5 (2) Terminal Block Header, 3 Position: Phoenix Contact # 1843619 MCV 1.5/3-G-3.5 (2) Terminal Block Header, 4 Position: Phoenix Contact # 1843622 MCV 1.5/4-G-3.5 (2) Screw Terminal Block, 2 Position: Phoenix Contact # 1863152 MCVR 1.5/2-ST-3.5 (2) Screw Terminal Block, 3 Position: Phoenix Contact # 1863165 MCVR 1.5/3-ST-3.5 (2) Screw Terminal Block, 4 Position: Phoenix Contact # 1863178 MCVR 1.5/4-ST-3.5 (2) DC Power Jack: Switchcraft RAPC712 (2) DC Power Plug: Switchcraft 760 (12) 1/4” spacers, 4-40 clearance (4) 3/16” spacers, 4-40 clearance (16) 4-40 nuts

Fits insert panels M107, M108.




31

P502-SP Selected Parts for P502

Stuffs both serial modules and all 8 DC reg. modules. Linear regulators + resistors, and caps to make ± 5VDC, ± 3.3VDC, ± 2.5VDC, ± 2.0VDC regulated voltages.

Included: (2) MAX232A (2) 7805 (2) 7905 (2) LM317 (2) LM337 (10) 402 ohm 1% 0805 SMT resistors (10) 243 ohm 1% 0805 SMT resistors (15) .1uF 0805 SMT capacitors (12) 1uF electrolytic capacitors (8) 22uF electrolytic capacitors There are just a few more resistors and capacitors than you need to fill the linear regulation modules, for some flexibility to meet your design needs.

You might have been thinking: “Hey, I could track down the parts listed above myself!” That’s ok. We offer component kits for our customer’s convenience, and to make sure that our customers can get these parts right away, even if normal purchasing lead times are several weeks.

MODULAR CASE SERIES



32

M101 Black Anodized Aluminum 8” Blank Insert,

M100, M102-M108 Gold Zinc Steel Insert Plates

All plates have steel inserts to protect from stripping screw threads.

M101: Black Anodized, Line Grained Aluminum for a cosmetic finish without polycarbonate labels, or for easy modification when very unusual cutouts are required. Covers an entire front or back of a Modular Case.

Individual Plates, as shown from Left to Right:

M100 Insert Plate, Blank M102 Insert Plate, .250” and .375” Diameter Holes M103 Insert Plate, .500” Diameter Holes M104 Insert Plate, DB9 or DB15 High Density M105 Insert Plate, DB15 M106 Insert Plate, DB25 M107 Insert Plate, Screw Type Terminal Blocks M108 Insert Plate, DC Power Connector

M107 and M108 Insert Plates, shown with P501 Snap-Apart elements and parts.

MODULAR CASE SERIES



33

M201 Pair of Covers with Fasteners & Feet

Included: Two covers, 45 4-40x3/16“ flathead screws, 5 4-40x3/8“ panhead screws, 5 4-40 nut, 4 stick-on feet and 4 screw-type feet.

Black wrinkle finish over robust .081” aluminum.Four indents on inside cover may be easily drilled out for locating screw-type rubber feet or stacking spacers. Ten countersunk holes on each end for attaching insert plates and end panels may be covered completely using M400 polycarbonate label set. Label set also has clear windowed strips for placing product name, control/connector text on cover’s beveled edges.

M202 Pair of End Panels

Two panels included. Black anodized, line grained aluminum for an elegant finish. Steel inserts to protect from stripping screw threads.

MODULAR CASE SERIES



34

M400 Polycarbonate Label Set

Two full sets of tough, scratch resistant labels. Permanent, production quality adhesive backing for a permanent bond in 48 hours. Matte Black. Label strips with small window: for placing model name on cover panel bevel edge. Label strips with large window: for placing connector or controls text over cover’s insert plate retaining screws, hiding them. Large labels: for covering insert plates with a production quality finish. Trim out desired insert plate holes with a very sharp detail knife, then install parts. Label strips with no window: for hiding insert plate retaining screws with no text.

MODULAR CASE SERIES



35

K901 “Designer‘s Choice” Modular Case Kit

Included: One each, M201 Covers with Fasteners, Screws, Feet; M202 End Panels One each, M101 8” Black Anodized Insert Plate, M400 Polycarbonate Label Set Four Each, M100 Blank Insert Panels Two Each, M102, M103, M104, M105, M106, M107, M108 Insert Panels (.250”/.375” holes,.500” holes, DB9/15HD, DB15, DB25, T. Blk, Pwr Conn) Makes one modular case, with extra labels and enough extra inserts for flexibility. Showcase your design to reflect the value within. Turn your lab prototype intoa finished high quality product in hours. Because a $5 hobby project box leaves an impression difficult to remove, no matter how good the electronics.



36

About Us Bellin Dynamic Systems, Inc. was incorporated on the evening of July 4, 2001, while the fireworks of nearby Disneyland could be heard in the distance. We are also a design and development house providing engineering services for the military and consumer electronics industries, however we are not taking on more clients at this time. We do a lot of prototyping ourselves.

Legal Stuff Copyright 2003 Bellin Dynamic Systems Inc., all rights reserved. Effort has been made to ensure that this catalog is accurate, however we reserve the right to make corrections or amendments to the content at any time.



37

Product Index B500-3P…... pg 28 P514………. pg 6 C800………. pg 29 P515………. pg 6 C801………. pg 29 P516………. pg 12 C802………. pg 29 P517………. pg 13 C803………. pg 29 P518………. pg 16 C804………. pg 29 P519………. pg 17 C805………. pg 29 Q20-18……. pg 19 K900………. pg 3 Q20x2…….. pg 19 K901………. pg 35 Q22-20……. pg 19 K910………. pg 4 Q28-32……. pg 19 Q28x1……... pg 19 M100………. pg 32 Q32-28……. pg 19 M101………. pg 32 Q48-44……. pg 20 M102………. pg 32 Q52-48……. pg 20 M103………. pg 32 Q54-44……. pg 20 M104………. pg 32 Q64-52……. pg 21 M105………. pg 32 Q64-64……. pg 21 M106………. pg 32 Q70-80……. pg 21 M107………. pg 32 Q80-80……. pg 22 M108………. pg 32 Q100-80..…. pg 22 M201………. pg 33 Q100-100…. pg 22 M202………. pg 33 M400………. pg 34 P500………. pg 27 P501………. pg 25 P501-SP…... pg 30 P502………. pg 5 P502-SP….. pg 31 P503………. pg 10 P504………. pg 14 P505………. pg 7 P506………. pg 26 P507………. pg 11 P508………. pg 23 P509………. pg 24 P510………. pg 8 P511………. pg 9 P512………. pg 15 P513………. pg 6

2004 product catalog - bellin dynamic systems · pdf filebellin dynamic systems, inc. 211 s...

Documents