2-series network cameraquick operation guide of network camera 1 thank you for purchasing our...

2-series Network Camera

Quick Operation Guide

V1.0.0

UD.6L0201C1157A02

Quick Operation Guide of Network Camera

1

Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate

to contact the dealer.

This manual applies to

Type Model

20xx Series DS-2CD2012-I, DS-2CD2032-I


22xx Series DS-2CD2212-I5, DS-2CD2232-I5, DS-2CD2212-I3, DS-2CD2232-I3


26xx Series DS-2CD2612F-I, DS-2CD2632F-I

27xx Series DS-2CD2712F-I(S); DS-2CD2732F-I(S)

This manual may contain several technical incorrect places or printing errors, and the content is

subject to change without notice. The updates will be added to the new version of this manual. We

will readily improve or update the products or procedures described in the manual.

DISCLAIMER STATEMENT

“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested for fire, shock or casualty hazards as outlined

in UL’s Standard(s) for Safety, UL60950-1. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product. UL MAKES NO REPRESENTATIONS,

WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY

OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”


2

Table of Contents

Chapter 1 Appearance Description ........................................................................................................................ 3

1.1 Appearance Description of Bullet Camera ........................................................................................................... 3

1.1.1 20xx Series Bullet Camera ................................................................................................................................ 3



1.2 Appearance Description of Dome Camera ........................................................................................................... 6

1.2.1 21xx Series Dome Camera ................................................................................................................................ 6

1.2.2 27xx Series Dome Camera ................................................................................................................................ 7

1.3 Appearance Description of Turret Camera ........................................................................................................... 8

Chapter 2 Setting the Network Camera over the LAN ........................................................................................... 9

Chapter 3 Accessing via Web Browsers ................................................................................................................ 11


3

Chapter 1 Appearance Description

1.1 Appearance Description of Bullet Camera

1.1.1 20xx Series Bullet Camera

Camera Overview:

1

2

4

6

3

Figure 1-1 Bullet Camera Overview

Table 1-1 Description

No. Description

1 Sun Shield

2 Back Box

3 Grounding Screw

4 Adjustable Bracket

5 Mounting Base

6 Reset

Quick Operation Guide of Network Camera 4


Camera Overview:

1

2

4

5

6

3

Figure 1-2 Bullet Camera Overview


No. Description

1 Lens

2 IR LED

3 Sun Shield

4 Adjusting Screw

5 Network Cable

6 Power Cable


5


Camera Overview:

54

10

9

7

3

8

6

1

2

1211

Figure 1-3 Overview

Table 1-3 Overview

No. Description

1 Sun Shield

2 Front Cover

3 Zoom and Focus Lever

4 IR LED

5 Lens

6 Air Vent

7 Video Output Interface

8 Integrated Bracket

9 Reset Button

10 SD Card Slot

11 Power Cable

12 Network Cable


1.2 Appearance Description of Dome Camera

1.2.1 21xx Series Dome Camera

Camera Overview:

1

2

3

4

5

6

7

8

9

Figure 1-4 Overview


No. Description

1 Mounting Base

2 Horizontal Stand

3 Vertical Stand

4 Bubble

5 Cables

6 IR LED

7 Lens

8 Black Liner

9 Safety Rope


1.2.2 27xx Series Dome Camera

Camera Description

2

1

3

4 5

67

8

9

Figure 1-5 Overview


No. Description

1 Bubble

2 Black Liner

3 Reset Button

4 AUX Video Output Interface

5 Serial Port

6 Power Cable

7 Ethernet Cable

8 Adapter Plate

9 Lens


8

1.3 Appearance Description of Turret Camera

Camera Overview:

3

1

2

4

5

6

7

Figure 1-6 Overview


NO. Description

1 10M/100M self-adaptive Ethernet interface

2 Power Cable

3 Trim Ring

4 Lens

5 IR LED

6 Enclosure

7 Camera


9

Chapter 2 Setting the Network Camera over

the LAN Purpose:

To view and configure the camera via LAN (Local Area Network), you need to connect the network

camera in the same subnet with your PC. Then install the iVMS-4200 software to search and change

the IP address of the network camera.

The following figure shows the cable connection of a network camera and a PC:

Figure 2-1 Wiring over LAN

Set the IP address of the camera for accessing via LAN.

Steps:

1. Use iVMS-4200 client software to detect the online devices. Please refer to the user manual of

iVMS-4200 client software for detailed information.

● Search online devices automatically After launch iVMS-4200 software, it automatically searches the online devices every 15

seconds from the subnet where your computer locates. It displays the total number and

information of the searched devices in the Online Devices interface.

Go to Device Management, and click Server tab on the left-top of the window, and you can

see the online devices listed on the right bottom of the window.

Figure 2-2 Search Online Devices


Device can be searched and displayed in the list in 15 seconds after it went online; it will be removed

from the list in 45 seconds after it went offline.

● Search online devices manually

You can also click to refresh the online device list manually. The newly

searched devices will be added to the online list.

2. Change the IP address and subnet mask to the same subnet as of your PC.

Steps:

1) Click the device to be modified in the device list and click to modify the

network parameters.

2) Edit the modifiable network parameters, e.g. IP address and port number.

3) Enter the admin password in the Manager Password field and click to save

the changes.

Figure 2-3 Modify Network Parameters

The default value of the IP address is “192.0.0.64”. The default user name is “admin”, and password is “12345”.

For accessing the network camera from different subnets, please set the gateway for the network camera after you log in.


11

Chapter 3 Accessing via Web Browsers System Requirement:

Operating System: Microsoft Windows XP SP1 and above version / Vista / Win7 / Server 2003 /

Server 2008 32bits

CPU: Intel Pentium IV 3.0 GHz or higher

RAM: 1G or higher

Display: 1024×768 resolution or higher

Web Browser: Internet Explorer 6.0 and above version, Apple Safari 5.02 and above version, Mozilla

Firefox 3.5 and above version and Google Chrome8 and above version

Steps:

1. Open the web browser.

2. In the browser address bar, input the IP address of the network camera, e.g., 192.0.0.64 and hit

the enter key to enter the login interface.

3. Input the user name and password.

4. Click .

Figure 3-1 Login Interface

5. Install the plug-in before viewing the live video and managing the camera. Please follow the

installation prompts to install the plug-in.

You may have to close the web browser to finish the installation of the plug-in.


12

Figure 3-2 Download Plug-in

Figure 3-3 Download New Version Plug-in

Figure 3-4 Install Plug-in


13

Figure 3-5 Complete the Plug-in Installation

6. Reopen the web browser after the installation of the plug-in and repeat the above steps 2-4 to

login.

For detailed instructions of further configuration, please refer to the user manual of network

camera.

Chapter 1 Appearance Description1.1 Appearance Description of Bullet Camera1.1.1 20xx Series Bullet Camera1.1.2 22xx Series Bullet Camera1.1.3 26xx Series Bullet Camera

1.2 Appearance Description of Dome Camera1.2.1 21xx Series Dome Camera1.2.2 27xx Series Dome Camera

1.3 Appearance Description of Turret Camera

Chapter 2 Setting the Network Camera over the LANChapter 3 Accessing via Web Browsers

2-series network cameraquick operation guide of network camera 1 thank you for purchasing our...

Documents