1. Correcting Time Entry Errors in DeltekClick here to start To navigate through this course click on the screen to go to the next step. The course will end automatically when you have completed the course.

2. Correcting Time Entry Errors in DeltekIf you receive an error message when saving your timesheet you should read the note in the Error section of the Save Timesheet window. 3. Correcting Time Entry Errors in DeltekClick the Close button at the bottom of the window to return to the Timesheet screen. 4. Correcting Time Entry Errors in Deltek Correct the timesheet according to the information you read in the Save Timesheet window. 5. Correcting Time Entry Errors in Deltek When you have finished updating the timesheet click the save button. If the error message persists return to the timesheet table and troubleshoot using the below steps: 1.Ensure that you are charging the correct project. 2.Ensure that the PLC code and Organization columns are automatically filled. You can contact your project manager for the correct codes if you are unsure. If the errors persist, after troubleshooting, contact the help desk at GCIHelpdesk@globalconsultants.com 6. Correcting Time Entry Errors in DeltekClick OK in the Deltek Time & Expenses window. 7. Correcting Time Entry Errors in Deltek Click the __ (House) button to return to the MyDesktop screen. 8. Enter Daily, Holiday and Vacation Time Into Deltek Click the __ (Open Door) button to exit Deltek. 9. Correcting Time Entry Errors in DeltekCongratulations! You have completed correcting time entry errors in Deltek.