Quick Start Guide

Preparation

Custom FunctionsK

Insert the battery. Flip out the LCD monitor.

Image Playback

Menu Operations Image-recording Quality Q Quick Control Touch Screen

A Picture StyleK

Insert a card. Focus on the subject.Aim the viewfinder center over the subject and press the shutter button halfway to autofocus.

Attach the lens.Align the lens’s white or red mount index with the camera’s mount index of the same color.

Take the picture.Press the shutter button completely to take the picture.

Basic Zone Modes Movie Shooting

Creative Zone Modes

Set the lens focus mode switch to <f>.

Review the picture.The captured image will be displayed for 2 sec. on the LCD monitor.

Set the power switch to <1>, then set the Mode Dial to <A> (Scene Intelligent Auto).

1 6

2 7

3 8

4 9

5 o The J on the right of the function indicates that the function is available only in Creative Zone modes.

o Number of Possible Shots (Viewfinder Shooting)Temperature No Flash 50% Flash Use

At 23°C / 73°F Approx. 550 shots Approx. 440 shots

1. Press the <M> button to display the menu.2. Press the <Y> <Z> keys to select a tab, then press the

<W> <X> keys to select the desired item.3. Press <0> to display the setting.4. After selecting the setting, press <0>.

o Select [z1: Image quality], then press <0>. o Press the <Y> <Z> keys to select the image-recording quality, then press <0>.

o Press the <Q> button. X The Quick Control screen will appear.

o The LCD monitor is a touch-sensitive panel that you can operate with your fingers.

o For information on touch screen operations, refer to the Camera Instruction Manual.

o Press the <S> cross keys to select a function, then turn the <6> dial to set it.

o In Basic Zone modes, settable functions vary by shooting mode.

o Press the <XA> button. o Press the <Y> <Z> keys to select a Picture Style, then press <0>.

Style DescriptionD Auto Color tones optimized for the particular scene.P Standard Vivid colors and sharp images.Q Portrait Nice skin tones and slightly sharp images.R Landscape Vivid blue skies and greenery and very sharp images.V Monochrome Black-and-white images.

o For <S> (Neutral) and <U> (Faithful), refer to the Camera Instruction Manual.

C.Fn I: Exposure

1 Exposure level increments

2 ISO expansionC.Fn II: Image3 Highlight tone priorityC.Fn III: Autofocus/Drive4 AF-assist beam firing5 AF area selection method

6 Auto AF point selection: Color Tracking

7 AF point display during focus

8 VF display illumination9 Mirror lockup

C.Fn IV: Operation/Others10 Shutter/AE lock button11 Assign SET button

12 LCD display when power ON

13 Retract lens on power off

This quick reference guide explains the basic function settings and how to shoot and play back images. You can take this guide with you when shooting. For detailed instructions, refer to the EOS REBEL T6i (W) or EOS 750D (W) Instruction Manual.

CPQ-E154-000 © CANON INC. 2015

Quick Reference Guide

EOS REBEL T6i (W)EOS 750D (W)

EnglishE

Basic Zone Modes Creative Zone Modes

White index Red index

B Shooting information display

Index Magnify

Erase

Playback

uu yy

<M> button

LCD monitor/ Touch screen

<S> cross keys

<0> button

Menu items Menu settings

Tabs

Shutter speed

Picture Style

Shooting modeExposurecompensation/AEB setting

Metering modeWhite balance correctionAF area selection mode

White balance

AF operationReturn

ISO speed

Highlight tone priority

Built-in flash settings

Flash exposure compensation

Aperture

Auto Lighting OptimizerDrive mode

White balance bracketing

Image-recordingquality

Image-recording qualityPixels recordedPossible shots

Select image

xLS

Shooting OperationNomenclature

f: AF OperationK B AF Area Selection ModeKg: ISO SpeedK

A Live View Shooting

k Movie Shooting (Autoexposure)

S AF Point SelectionKi Drive Mode

Basic Zone Modes Creative Zone Modes

D Using the Built-in Flash

d: Program AE

s: Shutter-priority AE

f: Aperture-priority AE

o Press the <D> button to raise the built-in flash, then shoot.

Basic Zone ModesIf necessary, the built-in flash will be automatically raised and fired in low-light or backlit conditions (with certain shooting modes).

Creative Zone Modes

Viewfinder Information

All the settings necessary for shooting are set automatically.You just press the shutter button, and the camera does the rest.

You can change the camera settings as desired to shoot in various ways.

o Set the Mode Dial to <d>. o The camera automatically sets the shutter speed and aperture in the same way as the <A> mode.

o Set the Mode Dial to <s>. o Turn the <6> dial to set the desired shutter speed, then focus on the subject.

X The aperture will be set automatically. o If the aperture display blinks, turn the <6> dial until it stops blinking.

o Set the lens focus mode switch to <f>.

o Press the <Zf> button, press the <Y> <Z> keys to select the AF operation, then press <0>.

X (One-Shot AF):For still subjects

9 (AI Focus AF):Switches the AF operation automatically

Z (AI Servo AF):For moving subjects

o Press the <g> button. o Press the <Y> <Z> keys or turn the <6> dial to select the desired ISO speed, then press <0>.

o When [AUTO] is selected, the ISO speed is set automatically. When you press the shutter button halfway, the ISO speed setting is displayed. o Press the <A> button to display

the Live View image.

o Press the shutter button halfway to focus, then press it completely to take the picture.

o Set the power switch to <k>. X Set the Mode Dial to any shooting mode except <a>.

o Press the <S> or <B> button.

o Look through the viewfinder and press the <B> button.

X Each time you press the <B> button, the AF area selection mode changes. o Press the <A> button to start

shooting a movie. o To stop movie shooting, press the <A> button again.

o When the shooting mode is <a>, you can shoot movies with manual exposure.

o You can set movie shooting settings with the menu options under the [Z1] or [Z2] tab.

o Press the <S> or <B> button.

o You can shift the AF point horizontally by turning the <6> dial, and vertically by turning the <6> dial while holding down the <g> button. If you press <0> straight down, the center AF point (or center zone) will be selected.

o Press the <YQi> button, press the <Y> <Z> keys to select the drive mode, then press <0>.

u : Single shootingi : Continuous shooting B : Silent single shootingM : Silent continuous shootingQ : 10-sec. self-timer/ remote controll : Self-timer: 2 sec.q : Self-timer: Continuous

o Set the Mode Dial to <f>. o Turn the <6> dial to set the desired

aperture, then focus on the subject. X The shutter speed will be set automatically. o If the shutter speed display blinks, turn the <6> dial until it stops blinking.

o Number of Possible Shots (Live View Shooting)Temperature No Flash 50% Flash Use

At 23°C / 73°F Approx. 200 shots Approx. 180 shots

Built-in microphones

Recording movie

A Scene Intelligent Auto7 Flash OffC Creative Auto2 Portrait3 Landscape4 Close-up5 Sports

8 Special scene C Kids P Food x Candlelight 6 Night Portrait F Handheld Night Scene G HDR Backlight Control

<g> + <6>

<6>

<A> AE lock/Reduce button

<S> AF pointselection/Magnify button

<Q>Quick Controlbutton<0>Setting button

Access lamp

ApertureShutter speed

Exposure level indicatorFlash exposurecompensation

ISO speedFlash-readyMaximum burstAE lock

Focus indicator

Area AF frameAF points

19-point automaticselection AF

Zone AF(Manual zone selection)

Single-point AF(Manual selection)

Aspect ratioline

Grid

Shooting Function Settings<g> ISO speed setting button

Mode DialPower switch

<T>Display button

<B>AF area selection button

Shutter button

<6>Main Dial

Focus mode switch

<D>Flash button

<g> Aperture/Exposure compensation button

<A>Live View shooting/Movie shootingbutton

<S> Cross keys

Auto Lighting Optimizer

Shutter speedAperture

ISO speed

Image-recording qualityPossible shots

Drive mode

Exposure level indicator

Shooting mode

Picture Style

AF operation

Metering mode

Quick Control iconBattery checkzxcn

White balance