1 eere.energy.gov

National Residential Retrofit Guidelines

Benjamin Goldstein, Project Lead

U.S. Department of Energy

Draft for discussion and deliberation, not for distribution or citation

September 23, 2010

2 eere.energy.gov

National Residential Retrofit Guidelines

National Residential Retrofit Guidelines

Voluntary national guidelines for the work and workforce involved in residential

energy efficiency retrofits

Developed by NREL and Industry

Delivered to EERE for WAP and VP Recovery

through Retrofit

3 eere.energy.gov

Four Components

Job Task Analyses

Technical Standards Reference Guide

Essential Knowledge, Skills,

and Abilities

Standard Work Specifications

National Residential

Retrofit Guidelines

Workforce Work

4 eere.energy.gov

Genesis—WAP T&TA

“Develop national Weatherization certification and accreditation

standards.”

“Develop a national weatherization worker certification framework.”

“Develop a national weatherization training accreditation program and

trainer certification program.”

WAP Training and Technical Assistance Plan: Task 6

5 eere.energy.gov

Genesis—RTR

May, 2009: Vice President Biden called on the Council of Environmental Quality to develop a plan for Federal action to lay the architecture for a self-sustaining home energy efficiency retrofit industry.

Recovery Through Retrofit

6 eere.energy.gov

Genesis—RTR

Consumer Information

Consumers do not have access to

straightforward and reliable information.

FinancingHomeowners need

access to financing to pursue investments in

energy efficiency.

Recovery through Retrofit

Worker Certification

& TrainingConsumers and

industry want access to consistent

workforce standards and a national certification.

7 eere.energy.gov

RTR Six Recommendations

Develop a National Home Energy Performance Measure and Audit Tool

Develop Energy Performance Scale & Label for Homes

Support Municipal Energy Finance Programs

Improve Energy Efficiency Mortgages

Expand State Energy Revolving Loan Funds

Establish Voluntary National Standards for Workforce Certification and Training Program Accreditation

8 eere.energy.gov

Organizational Chart

Recovery through Retrofit

CEQ

OVP

RTR Agencies

DOE Office of Energy Efficiency and Renewable Energy

ASEE

DAS

WIP PM

Weatherization

Bob Adams Benjamin Goldstein

9 eere.energy.gov

• No comprehensive set of standards for entire range of whole-home energy retrofit interventions

• BPI Technical Standards and WAP Field Guides = Assortment of technical standards, core competencies, work protocols, and best practices

• WAP community, home performance industry, consumers, financiers, manufacturers, and retrofit program administrators all looking for consistent national standards

• Time for Federal leadership and industry partnership

Why Standards?

10 eere.energy.gov

• Government involvement in “standards” is complicated

• National Technology Transfer and Advancement Act and OMB Circular A-119

• ANSI Essential Requirements require “consensus”

• “Guidelines” proposed by Office of Information and Regulatory Affairs (OIRA--OMB)

• Government and industry can partner on developing “Guidelines”

“Standards” to “Guidelines”

11 eere.energy.gov

Retrofit Work Pyramid

Standard Work

Specifications*

Work Protocols

Best Practices

Technical Standards*

Developed By

Companies, retrofit crews, or individuals

Retrofit program administrators or

individual companies

Technicians and retrofit industry representatives (including building

trades, manufacturers, and building scientists)

Industry or third-party standards development

organizations—for example, ASHRAE, ASTM, and BPI

Description

Techniques, methods, or processes believed to be the most efficient and effective way of meeting the Standard Work Specifications

Sets of guidelines or rules that govern work procedures and often invoke Technical Standards

Define the performance requirements for high quality work and minimum conditions needed to achieve desired outcomes

Define safety, materials, installation, and application standards relevant to residential retrofits

* National Residential Retrofit GuidelinesDraft Deliberative, For Discussion Purposes Only, Not for Citation

12 eere.energy.gov

Retrofit Workforce Pyramid

Job Task Analysis*

Essential KSAs*

Certification

Developed By

Accredited PersonnelCertification Entities

Retrofit technicians, trainers, and program officials with

professional psychometricians

Retrofit technicians, trainers, and program officials

with professionalpsychometricians

Description

Evaluation/assessment ofskill standards in accordancewith ANSI 17024 Standard forPersonnel Certification (or equivalent)

Minimum knowledge, skills, andabilities that workers shouldpossess to perform highquality work

Identifies and inventories a job’s critical tasks

* National Residential Retrofit GuidelinesDraft Deliberative, For Discussion Purposes Only, Not for Citation

13 eere.energy.gov

• Identifies and inventories a job’s critical tasks.

• For a given job, a formal process for determining and cataloguing what a worker does.

• Tasks are classified as either cognitive or psychomotor skills, and as critical, very important, and important for job performance.

• Examples: set up blower door; run test in accordance with ASTM E779; record results of blower door test in diagnostic software; etc.

Job Task Analysis

14 eere.energy.gov

Four Residential Retrofit Job Classifications

Energy Auditor

Installer/

TechnicianCrew Chief

Quality Assurance Inspector

15 eere.energy.gov

• Identify the minimum knowledge, skills, and abilities that workers should possess to perform high quality work

• Each Job Task has a corresponding set of essential KSAs

• Examples– Demonstrate ability to blow insulation at appropriate air pressure and

material quantity to ensure complete coverage and manufacturer’s recommended density to achieve prescribed R-value

– Demonstrate ability to prioritize air sealing measures to inhibit moisture migration into attics and other interstitial spaces.

– Demonstrate knowledge of basic building science, including aligning barriers, stack effect, moisture transfer

Essential KSAs

16 eere.energy.gov

• Define the safety, materials, installation, and application standards, codes and regulations applicable to residential energy efficiency retrofits.

• Developed by government, industry or third-party standards development organizations

• Examples– ASHRAE 62.2 (Ventilation for Acceptable Indoor Air Quality)– ASTM E1186 – 03 (Standard Practices for Air Leakage Site Detection)– OSHA 1926.28 (Safety and Health Regulations for Construction;

Personal Protective Equipment)

• National Residential Retrofit Guidelines will contain a “Technical Standards Reference Guide” for industry

Technical Standards

17 eere.energy.gov

• Define the performance requirements for high quality work and the minimum conditions necessary to achieve the desired outcomes of a given energy efficiency retrofit measure

• Standard Work Specifications are detailed and prescriptive

• When applicable, SWS are based on technical standards

• Fill a critical niche in the “standards landscape”

Work specifications = setting the bar for quality work

Standard Work Specifications

18 eere.energy.gov

1.Standard Work SpecificationTITLE: Whole Wheat Bread Loaf

DESIRED OUTCOME (S): 1. Fully cooked whole wheat bread loaf 2. Bread slices fit evenly in a standard toaster 3. No holes in slices of bread 4. Brown crust that does not flake or break when sliced

Specifications Desired Outcomes

Loaf height Loaf height shall not exceed 5.5”Bread slices fit evenly in a standard toaster

Bread consistency No slice shall have a hole greater than 5 centimetersSlices accept spreads without falling through

CrustThe outer crust of the bread shall be light browned and must not flake or break when slicing

Crust maintains a clear border completely around each slice

OvenBread must be baked in an oven capable of maintaining a constant temperature of 350 degrees

Evenly-baked bread

Standard Work Specifications: Whole Wheat Bread

19 eere.energy.gov

Draft SWS: Attic Access Hatches and Doors

Standard Work Specifications

20 eere.energy.gov

Draft SWS: Attic Insulation Prep Detail -- Knee Wall

Standard Work Specifications

21 | Program Name or Ancillary Text eere.energy.gov

SWS are NOT Protocols or Best Practices

Bread Baking Protocols

1 Place bread flour in bowl

2Place 2 heaping tablespoons salt in bowl

3 Place 2/3 cup canola oil in bowl

4 Place ½ quart warm clover honey in bowl

5Place 4 tablespoons of yeast in mason jar with good sealing lid

6Place 1 ½ tablespoons sugar in mason jar with yeast

7 Place 1/2 cup warm water in mason jar

8 Shake vigorously

Bread Baking Best Practices

1Large wooden bowl works best to minimize spills

2 Use kosher, non-iodized salt, not sea salt

3Pour the canola oil in a circular pattern to evenly distribute over the flour

4Microwave the honey in a glass measuring cup

5Use a mason jar that you’ve already checked for tightness in the seal

6Place 1 ½ tablespoons sugar in mason jar with yeast

7Use the same glass measuring cup as was used for the honey

8 Put on some music; it helps with the shaking

22 eere.energy.gov

Technical Standard

Standard Work Specifications Knowledge, Skills, Abilities

International Residential Code (Ch. 3, 6, 7, 8, 11, 31)

International Energy Conservation Code (Ch. 4)

ASHRAE (62.2, 119, 136)

ASTM (C509, C920, C1363, C1642, C330M, E84, E779, E814, E2178)

Backing & Infill• Provide backing or infill as needed to

meet specified characteristics of the selected material and the hole

• Infill will not bend, sag, or move once installed

• Objective: Hole size small enough to use sealant, closure is permanent and supports any load

Sealant Selection• Materials adhere and are continuous

with intended surfaces, and meet ignition barrier requirements

• Objective: Permanent; meet/exceed performance characteristics of surrounding materials

Insulation• Use only non-combustible materials in

contact with chimneys, vents and flues • Objective: Do not create a fire hazard

• Ability to read and follow directions

• Physical ability to climb ladders and work in enclosed spaces

• Tolerance to heat and cold extremes

• Knowledge and ability to identify and differentiate building elements including framing, plumbing, electrical, insulation, sheathing, HVAC, fasteners

• Understanding of basic building science, including aligning barriers, stack effect, moisture transfer

• Knowledge of and ability to install sealants including methods and requirements

• Ability to use tools including a tape measure, utility knife, hand and power saws, caulk and foam guns

• Ability to recognize hazardous conditions requiring special treatment

Attic Air Sealing: Penetrations

23 eere.energy.gov

Retrofit Guidelines Process

Task NREL with developing Retrofit

Guidelines

(March, 2010)

1st draft Standard Work Specifications

(June 7-11)

SWS Technical Reviews WAP; Healthy Homes;

Worker Safety

(July 7-9)

Draft JTAs and KSAs

(July 12-16)

Webinar Series: Explain Process and Discuss

Implementation

(July 27 and August 4)

SWS Industry Technical Review and

JTA/KSA Validation

(July 26 to August 9)

OMB and Agency Review

(August 16—Sept 30)

VP Announcement and Public Comment

Period Begins

(Mid-October)

Incorporate Public Comments and Issue Final Guidelines

(Fall 2010)

24 eere.energy.gov

24

Industry Involvement

• Drafting SWS

60 Technical Experts

• Technical Reviews

80 Experts• Drafting

JTA/KSAs

50 Technicians

• Webinar Series

Industry Feedback

• Industry Technical Review

100 + reviewers

• JTA/KSA Review

50 + Workforce Experts • Public

Comment Period

Federal Register Notice

• Workforce Summit

Implementation Strategies

June

thru

Jul

yJu

ly t

hru

Oct

ober

25 eere.energy.gov

Guidelines to Credentials

National Residential Retrofit Guidelines

Worker Certification Architecture

Training Program Accreditation Architecture

26 eere.energy.gov

1. Lack of a credentialed workforce is an impediment for WAP and the home performance industry

2. No nationally-recognized workforce credential for WAP and market-rate retrofits (impedes mobility)

3. Wide range of WAP certifications across states

4. Existing national certifications are based on KSAs in need of improvement

5. No existing EE personnel certification entity accredited to ISO 17024 standard

Challenges: Credentialing

27 eere.energy.gov

1) Proliferation of training and credentialing programs for WAP and the home performance workforce

2) Major infusion of WAP training dollars with no standards

3) Major infusion of DOL training dollars with no standards

4) No objective measure of training program effectiveness

5) No uniform way for workers seeking training to assess the quality of the program or provider

Challenges: Training

28 eere.energy.gov

The National Residential Retrofit Guidelines will:

• Enable WAP officials and other retrofit program administrators to strengthen field guides and other work manuals by incorporating the high quality Standard Work Specifications contained in the Retrofit Guidelines

• Assist training providers in developing course content and curricula consistent with an industry-recognized suite of Job Task Analyses

• Increase workforce mobility up career ladders and across career lattices by establishing a clear set of essential Knowledge, Skills and Abilities upon which worker credentials should be based

Summary

29 eere.energy.gov

• Build confidence amongst consumers and the energy efficiency finance community that retrofit work will be completed in a quality manner and produce the expected energy savings and health benefits

• Lay the foundation for a more robust worker certification and training program accreditation architecture

Summary

30 eere.energy.gov

30

Next Steps: Staying Involved

1. Help spread the word! http://www1.eere.energy.gov/wip/retrofit_guidelines.html

2. Provide feedback on this Webinar

3. Submit questions now or via email (retrofit.guidelines@nrel.gov)

4. Start thinking about implementation opportunities for the National Residential Retrofit Guidelines

5. Plan to attend the Workforce Summit in DC in the Fall

31 eere.energy.gov

America Has Been Here Before…

32 eere.energy.gov

Contact Information

Benjamin Goldstein

National Residential Retrofit Guidelines

Project Lead

http://www1.eere.energy.gov/wip/retrofit_guidelines.html